sharp mx5500,6200,7000 service manual

656
SERVICE MANUAL Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. This document has been published to be used for after sales service only. The contents are subject to change without notice. SHARP CORPORATION NOTE FOR SERVICING [1] PRODUCT OUTLINE . . . . . . . . . . . . 1-1 [2] SPECIFICATIONS . . . . . . . . . . . . . . 2-1 [3] CONSUMABLE PARTS . . . . . . . . . . 3-1 [4] UNPACKING AND INSTALLATION For how to unpacking and installation, refer to the installation manual (00ZMX7000/I1E) [5] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . . . . . . . . . . 5-1 [6] ADJUSTMENTS . . . . . . . . . . . . . . . . 6-1 [7] SIMULATION . . . . . . . . . . . . . . . . . . 7-1 [8] SELF DIAG AND TROUBLE CODE . 8-1 [9] MAINTENANCE . . . . . . . . . . . . . . . . 9-1 [10] ROM VERSION-UP . . . . . . . . . . . . 10-1 [11] ELECTRICAL SECTION. . . . . . . . . 11-1 [12] OTHERS . . . . . . . . . . . . . . . . . . . . . 12-1 DETAILS OF EACH SECTION [A] EXTERNAL OUTFIT . . . . . . . . . . . . . A-1 [B] OPERATION PANEL . . . . . . . . . . . . B-1 [C] DSPF SECTION . . . . . . . . . . . . . . . C-1 [D] SCANNER SECTION . . . . . . . . . . . D-1 [E] MANUAL PAPER FEED SECTION .E-1 [F] TRAY PAPER FEED SECTION . . . . F-1 [G] PAPER TRANSPORT SECTION . . G-1 [H] DUPLEX SECTION . . . . . . . . . . . . H-1 [i] LSU SECTION . . . . . . . . . . . . . . . . . i -1 [J] PHOTOCONDUCTOR SECTION. . . J-1 [K] TONER SUPPLY SECTION . . . . . . .K-1 [L] DEVELOPING SECTION . . . . . . . . . L-1 [M] TRANSFER SECTION . . . . . . . . . . M-1 [N] PROCESS CONTROL SENSOR, REGISTRATION SENSOR SECTION . . . . . . . . . . . . . . . . . . . . N-1 [O] FUSING SECTION . . . . . . . . . . . . . O-1 [P] PAPER EXIT SECTION . . . . . . . . . .P-1 [Q] DRIVE SECTION . . . . . . . . . . . . . . Q-1 [R] PWB SECTION. . . . . . . . . . . . . . . . R-1 [S] FAN, FILTER SECTION . . . . . . . . . .S-1 [T] SENSOR, SWITCH SECTION . . . . . T-1 CONTENTS CODE: 00ZMX7000/S1E DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM MODEL MX-5500N MX-6200N MX-7000N

Upload: cesar-jimenez

Post on 27-Nov-2015

505 views

Category:

Documents


1 download

DESCRIPTION

service manualSharp MX5500,6200,7000Color Digital Multifunction System

TRANSCRIPT

  • SERVICE MANUAL

    Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts withspecified ones for maintaining the safety and performance of the set.

    This document has been published to be usedfor after sales service only.The contents are subject to change without notice.

    SHARP CORPORATION

    NOTE FOR SERVICING[1] PRODUCT OUTLINE . . . . . . . . . . . . 1-1[2] SPECIFICATIONS . . . . . . . . . . . . . . 2-1[3] CONSUMABLE PARTS . . . . . . . . . . 3-1[4] UNPACKING AND INSTALLATION

    For how to unpacking and installation, refer to the installation manual (00ZMX7000/I1E)

    [5] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . . . . . . . . . . 5-1

    [6] ADJUSTMENTS . . . . . . . . . . . . . . . . 6-1[7] SIMULATION . . . . . . . . . . . . . . . . . . 7-1[8] SELF DIAG AND TROUBLE CODE . 8-1[9] MAINTENANCE . . . . . . . . . . . . . . . . 9-1

    [10] ROM VERSION-UP . . . . . . . . . . . . 10-1[11] ELECTRICAL SECTION. . . . . . . . . 11-1[12] OTHERS. . . . . . . . . . . . . . . . . . . . . 12-1 DETAILS OF EACH SECTION[A] EXTERNAL OUTFIT. . . . . . . . . . . . .A-1[B] OPERATION PANEL . . . . . . . . . . . .B-1[C] DSPF SECTION . . . . . . . . . . . . . . . C-1[D] SCANNER SECTION . . . . . . . . . . . D-1[E] MANUAL PAPER FEED SECTION .E-1

    [F] TRAY PAPER FEED SECTION . . . .F-1[G] PAPER TRANSPORT SECTION . . G-1[H] DUPLEX SECTION . . . . . . . . . . . . H-1[ i ] LSU SECTION . . . . . . . . . . . . . . . . . i -1[J] PHOTOCONDUCTOR SECTION. . . J-1[K] TONER SUPPLY SECTION . . . . . . .K-1[L] DEVELOPING SECTION . . . . . . . . . L-1[M] TRANSFER SECTION . . . . . . . . . . M-1[N] PROCESS CONTROL SENSOR,

    REGISTRATION SENSOR SECTION . . . . . . . . . . . . . . . . . . . . N-1

    [O] FUSING SECTION . . . . . . . . . . . . . O-1[P] PAPER EXIT SECTION . . . . . . . . . .P-1[Q] DRIVE SECTION . . . . . . . . . . . . . . Q-1[R] PWB SECTION. . . . . . . . . . . . . . . . R-1[S] FAN, FILTER SECTION . . . . . . . . . .S-1[T] SENSOR, SWITCH SECTION . . . . . T-1

    CONTENTS

    CODE: 00ZMX7000/S1E

    DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM

    MODEL

    MX-5500NMX-6200NMX-7000N

  • CONTENTS

    NOTE FOR SERVICING1. Precautions for servicing . . . . . . . . . . . . . . . . . . . . . . . . i2. Warning for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . i3. Note for installing site . . . . . . . . . . . . . . . . . . . . . . . . . . . i

    [1] PRODUCT OUTLINE1. Product features . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 12. Newly employed technology . . . . . . . . . . . . . . . . . . 1 - 13. Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

    [2] SPECIFICATIONS1. Basic specifications . . . . . . . . . . . . . . . . . . . . . . . . 2 - 12. Functional specifications. . . . . . . . . . . . . . . . . . . . . 2 - 43. Ambient conditions . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 15

    [3] CONSUMABLE PARTS1. Supply system table . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12. Maintenance parts list . . . . . . . . . . . . . . . . . . . . . . . 3 - 23. Production number identification . . . . . . . . . . . . . . 3 - 54. The indication of remaining toner amount and the

    status of toner cartridge . . . . . . . . . . . . . . . . . . . . . 3 - 6[4] UNPACKING AND INSTALLATION

    * For how to unpacking and installation, refer to the installation manual (00ZMX7000/I1E)

    [5] EXTERNAL VIEW AND INTERNAL STRUCTURE1. Identification of each section and functions . . . . . . 5 - 1

    [6] ADJUSTMENTS1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 12. Adjustment item list. . . . . . . . . . . . . . . . . . . . . . . . . 6 - 13. Details of adjustment . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

    [7] SIMULATION1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 12. List of simulation codes . . . . . . . . . . . . . . . . . . . . . 7 - 33. Details of simulation . . . . . . . . . . . . . . . . . . . . . . . . 7 - 104. Soft switch (Detail of SIM 66-1) . . . . . . . . . . . . . . . 7 - 111

    [8] SELF DIAG AND TROUBLE CODE1. Self diag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 12. Trouble code list . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 43. Details of trouble code . . . . . . . . . . . . . . . . . . . . . . 8 - 8

    [9] MAINTENANCE1. Maintenance system table . . . . . . . . . . . . . . . . . . . 9 - 12. Details of maintenance . . . . . . . . . . . . . . . . . . . . . . 9 - 43. Other related items . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 16

    [10] ROM VERSION-UP1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 12. Version-up procedure . . . . . . . . . . . . . . . . . . . . . . 10- 1

    [11] ELECTRICAL SECTION1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11- 12. Actual wiring chart . . . . . . . . . . . . . . . . . . . . . . . . .11- 123. Signal list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11- 43

    [12] OTHERS1. System settings (Administrator) . . . . . . . . . . . . . . 12- 12. Paper JAM code . . . . . . . . . . . . . . . . . . . . . . . . . . 12- 43. Hidden Page for Serviceman Only . . . . . . . . . . . . 12- 6

    DETAILS OF EACH SECTION[A] EXTERNAL OUTFIT

    1. Disassembly and assembly . . . . . . . . . . . . . . . . . . A - 1[B] OPERATION PANEL

    1. Electrical and mechanism relation diagram. . . . . . B - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . B - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . B - 2

    [C] DSPF SECTION1. Electrical and mechanism relation diagram. . . . . . C - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . C - 73. Disassembly and assembly . . . . . . . . . . . . . . . . . . C - 84. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C - 39

    [D] SCANNER SECTION1. Electrical and mechanism relation diagram. . . . . . D - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . D - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . D - 34. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D - 10

    [E] MANUAL PAPER FEED SECTION1. Electrical and mechanism relation diagram. . . . . . E - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . E - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . E - 24. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - 10

    [F] TRAY PAPER FEED SECTION1. Electrical and mechanism relation diagram. . . . . . .F - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . .F - 53. Disassembly and assembly . . . . . . . . . . . . . . . . . . .F - 64. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F - 23

    [G] PAPER TRANSPORT SECTION1. Electrical and mechanism relation diagram. . . . . . G - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . G - 63. Disassembly and assembly . . . . . . . . . . . . . . . . . . G - 64. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G - 20

    [H] DUPLEX SECTION1. Electrical and mechanism relation diagram. . . . . . H - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . H - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . H - 24. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H - 17

    [ i ] LSU SECTION1. Electrical and mechanism relation diagram. . . . . . . i - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . . i - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . . i - 34. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i - 10

    [J] PHOTOCONDUCTOR SECTION1. Electrical and mechanism relation diagram. . . . . . .J - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . .J - 43. Disassembly and assembly . . . . . . . . . . . . . . . . . . .J - 54. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .J - 15

    [K] TONER SUPPLY SECTION1. Electrical and mechanism relation diagram. . . . . . K - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . K - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . K - 24. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K - 5

    [L] DEVELOPING SECTION1. Electrical and mechanism relation diagram. . . . . . .L - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . .L - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . .L - 24. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L - 13

    [M] TRANSFER SECTION1. Electrical and mechanism relation diagram. . . . . . M - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . M - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . M - 34. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M - 18

  • CONTENTS

    [N] PROCESS CONTROL SENSOR, REGISTRATION SENSOR SECTION1. Electrical and mechanism relation diagram . . . . . . N - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . . N - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . N - 24. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N - 4

    [O] FUSING SECTION1. Electrical and mechanism relation diagram . . . . . . O - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . . O - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . O - 34. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O - 24

    [P] PAPER EXIT SECTION1. Electrical and mechanism relation diagram . . . . . . P - 12. Operational descriptions . . . . . . . . . . . . . . . . . . . . . P - 23. Disassembly and assembly . . . . . . . . . . . . . . . . . . P - 24. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P - 7

    [Q] DRIVE SECTION1. Disassembly and assembly . . . . . . . . . . . . . . . . . . Q - 12. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q - 32

    [R] PWB SECTION1. Disassembly and assembly . . . . . . . . . . . . . . . . . . R - 1

    [S] FAN, FILTER SECTION1. Disassembly and assembly . . . . . . . . . . . . . . . . . . S - 12. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S - 9

    [T] SENSOR, SWITCH SECTION1. Disassembly and assembly . . . . . . . . . . . . . . . . . . T - 1

  • MX-7000N NOTE FOR SERVICING - i

    MX-7000N 5GTXKEG/CPWCNNOTE FOR SERVICINGThis Service Manual uses some symbols to assure safe operation.Please understand the meanings of photographs before servicing.

    1. Precautions for servicing1) When servicing, disconnect the power plug, the printer cable,

    the network cable, and the telephone line from the machine,except when performing the communication test, etc.It may cause an injury or an electric shock.

    2) There is a high temperature area inside the machine. Use anextreme care when servicing.It may cause a burn.

    3) There is a high voltage section inside the machine which maycause an electric shock. Be careful when servicing.

    4) Do not disassemble the laser unit. Do not insert a reflectivematerial such as a screwdriver in the laser beam path.It may damage eyes by reflection of laser beams.

    5) When servicing with the machine operating, be careful not tosqueeze you hands by the chain, the belt, the gear, and otherdriving sections.

    6) Do not leave the machine with the cabinet disassembled.Do not allow any person other than a serviceman to touchinside the machine. It may cause an electric shock, a burn, oran injury.

    7) When servicing, do not breathe toner, developer, and inkexcessively. Do not get them in the eyes.If toner, developer, or ink enters you eyes, wash it away withwater immediately, and consult a doctor if necessary.

    8) The machine has got sharp edges inside. Be careful not todamage fingers when servicing.

    9) Do not throw toner or a toner cartridge in a fire. Otherwise,toner may pop and burn you.

    10) When replacing the lithium battery of the PWB, use a specifiedone only.If a battery of different specification is used, it may be broken,causing breakdown or malfunction of the machine.

    11) When carrying a unit with PWB or electronic parts installed toit, be sure to put it in an anti-static-electricity bag.It may cause a breakdown or malfunctions.

    2. Warning for servicing1) Be sure to connect the power cord only to a power outlet that

    meets the specified voltage and current requirements.Avoid complex wiring, which may lead to a fire or an electricshock.It may cause a fire or an electric shock.

    2) If there is any abnormality such as a smoke or an abnormalsmell, interrupt the job and disconnect the power plug.It may cause a fire or an electric shock.

    3) Be sure to connect the grounding wire. If an electric leakageoccurs without grounding, a fire or an electric shock mayresult.To protect the machine and the power unit from lightening,grounding must be made.

    4) When connecting the grounding wire, never connect it to thefollowing points.It may cause an explosion, a fire or an electric shock. Gas tube Lightning conductor A water pipe or a water faucet, which is not recognized as a

    grounding object by the authorities. Grounding wire for telephone line

    5) Do not damage, break, or work the power cord.Do not put heavy objects on the power cable. Do not bend itforcibly or do not pull it extremely.It may cause a fire or an electric shock.

    6) Keep the power cable away from a heat source.Do not insert the power plug with dust on it into a power outlet.It may cause a fire or an electric shock.

    7) Do not put a receptacle with water in it or a metal piece whichmay drop inside the machine.It may cause a fire or an electric shock.

    8) With wet or oily hands, do not touch the power plug, do notinsert the telephone line jack, do not operate the machine, ordo not perform servicing.It may cause an electric shock.

    3. Note for installing siteDo not install the machine at the following sites.1) Place of high temperature, high humidity, low tempera-

    ture, low humidity, place under an extreme change in tem-perature and humidity.Paper may get damp and form dews inside the machine, caus-ing paper jam or copy dirt.For operating and storing conditions, refer to the specificationsdescribed later.

    2) Place of much vibrationsIt may cause a breakdown.

    3) Poorly ventilated placeAn electro-static type copier will produce ozone inside it.The quantity of ozone produced is designed to a low level soas not to affect human bodies. However, continuous use ofsuch a machine may produce a smell of ozone. Install themachine in a well ventilated place, and ventilate occasionally.

    WARNING: If this WARNING should be ignored, a serious

    danger to life or a serious injury could result.

    CAUTION: If this CAUTION should be ignored, an injury or

    a damage to properties could result.

    CAUTION

    DOUBLE POLE/NEUTRAL FUSING

  • MX-7000N NOTE FOR SERVICING - ii

    4) Place of direct sunlight.Plastic parts and ink may be deformed, discolored, or mayundergo qualitative change.It may cause a breakdown or copy dirt.

    5) Place which is full of organic gases such as ammoniumThe organic photoconductor (OPC) drum used in the machinemay undergo qualitative change due to organic gases such asammonium.Installation of this machine near a diazo-type copier may resultin dirt copy.

    6) Place of much dustWhen dusts enter the machine, it may cause a breakdown orcopy dirt.

    7) Place near a wallSome machine require intake and exhaust of air.If intake and exhaust of air are not properly performed, copydirt or a breakdown may be resulted.

    8) Unstable or slant surfaceIf the machine drops or fall down, it may cause an injury or abreakdown.If there are optional paper desk and the copier desk specified,it is recommendable to use them.When using the optional desk, be sure to fix the adjuster andlock the casters.

    45 cm(17-23/32")

    30 cm(11-13/16")

    30 cm(11-13/16")

  • MX-7000N PRODUCT OUTLINE 1 1

    MX-7000N 5GTXKEG/CPWCN[1] PRODUCT OUTLINE

    1. Product features

    2. Newly employed technology

    No. Features Content Employed technology1 High-speed color output by tandem process Color output: 41 sheets/min Print by the 2-beam LSU, paper

    transport by the full grip short path (Monochrome print only)

    Monochrome output: 70 sheets/min [MX-7000N]62 sheets/min [MX-6200N]55 sheets/min [MX-5500N]

    * When A4/8.5 x 11 paper is used.2 High-volume paper feed, Paper exit option Standard paper feed capacity: 3,100 sheets

    Max. paper feed capacity: 6,600 sheetsPaper feed option: A4LCC, Large LCCPaper exit option: 4K finisher, 4K saddle finisher

    3 Color document duplex simultaneous scan (DSPF)

    Single surface scanMonochrome: 65 sheets/minColor: 35 sheets/min

    Color duplex document is scanned by one scan.

    Duplex scanMonochrome: 65 pages/minColor: 35 pages/min

    4 Improved usability by the large-type color LCD panel

    The color VGA LCD panel (10.4") is employed to improve visibility and operability.The mode keys are arranged on the LCD panel. The number of mode keys is increased or decreased depending on the installation of option units. Linked with the user authentication.User's frequently used features can be concentrated on the home screen, allowing quick selection of a desired function with less key operations.

    No. Item Content Remark1 2-beam LSU employed Simultaneous writing with 2-beam allows high speed

    monochrome printing.Resolution: 600dpi

    2 Full grip short path The full grip short path is used for the paper transport system to stabilize paper transport.

  • MX-7000N PRODUCT OUTLINE 1 2

    3. ConfigurationA. Lineup (Main unit and option)

    FinisherMX-FNX3

    Saddle stitch finisherMX-FNX4

    Saddle staple cartridge(For saddle stitch finisher)

    AR-SC3

    Staple cartridge(For finisher/saddle stitch finisher)

    AR-SC2

    InserterMX-CFX1

    Paper pass unitMX-RBX2

    Large capacity trayMX-LCX2

    Large capacity trayMX-LCX3

    Punch moduleMX-PNX2AMX-PNX2BMX-PNX2CMX-PNX2D

    Digital full color multifunctional system(Copier/Printer/Scanner)MX-5500N/6200N/7000N

    Facsimile expansion kitMX-FXX1

    Sharpdesk 1 license kitMX-USX1

    Sharpdesk 5 license kitMX-USX5

    Sharpdesk 10 license kitMX-US10

    Sharpdesk 50 license kitMX-US50

    Sharpdesk 100 license kitMX-USA0

    PS3 expansion kitMX-PKX1

    Application integrationmodule

    MX-AMX1

    Barcode font kitAR-PF1

    Expansion kit (Software, ROM)

    Fiery print controllerMX-PEX2

    Data security kit(Authentication version)

    MX-FRX3Data security kit

    (Commercial version)MX-FRX3U

    Application communicationmodule

    MX-AMX2

    External account moduleMX-AMX3

    Internet Fax expansion kitMX-FWX1

    Expansion kit (Software)

    Data security kit FAX system

    Fiery option

  • MX-7000N PRODUCT OUTLINE 1 3

    B. Machine configuration

    C. Combination of options list

    Copier memory (Local memory) (MB) 1GBPrinter memory (System memory) (MB) 896MBCopier Standard provisionPCL printer Standard provisionPS printer Option (Product key target.)Main body LCD Color VGA 10.4"FAX Option (No support for some areas.)Scanner Standard provisionFiling Standard provisionHDD Standard provisionDSPF Standard provisionAutomatic duplex Standard provisionSecurity Option (Product key target.)Internet Fax Option (Product key target.)

    Section Name Model name RemarksPaper feed system Large capacity tray MX-LCX2 (A4)

    Large capacity tray MX-LCX3 (A3)Paper exit system Paper pass unit MX-RBX2 Required when the finisher or the saddle stitch finisher is installed.

    Inserter MX-CFX1 The finisher or the saddle stitch finisher is required. When combining the finisher with the inserter, the punch unit is required.

    Finisher MX-FNX3 Simultaneous installation with the saddle stitch finisher is inhibited.Saddle stitch finisher MX-FNX4 Simultaneous installation with the finisher is inhibited.Punch module MX-PNX2A Requires the finisher or the saddle stitch finisher and the paper pass unit.

    MX-PNX2BMX-PNX2CMX-PNX2D

    Staple cartridge (For finisher/saddle stitch finisher)

    AR-SC2 Staple section

    Saddle staple cartridge (For saddle stitch finisher)

    AR-SC3 Saddle stitch section

    Data security kit Data security kit (Commercial version)

    MX-FRX3U

    Data security kit (Authentication version)

    MX-FRX3

    Expansion kit (Software, ROM)

    Barcode font kit AR-PF1

    Expansion kit (Software)

    PS3 expansion kit MX-PKX1Internet Fax expansion kit MX-FWX1Sharpdesk 1 license kit MX-USX1Sharpdesk 5 license kit MX-USX5Sharpdesk 10 license kit MX-US10Sharpdesk 50 license kit MX-US50Sharpdesk 100 license kit MX-USA0Application integration module MX-AMX1Application communication module MX-AMX2External account module MX-AMX3

    FAX system Facsimile expansion kit MX-FXX1 No support for some areas.Fiery option Fiery print controller MX-PEX2

  • MX-7000N SPECIFICATIONS 2 1

    MX-7000N 5GTXKEG/CPWCN[2] SPECIFICATIONS

    1. Basic specificationsA. Base engine(1) Type

    (2) Engine speed (ppm)a. Tray 1 4 (Main unit), LCC

    b. Large LCC

    * 8K and 16K are for China only.

    c. Manual (Main unit)

    *1: Switched by the service simulation setting

    (3) Engine composition

    (4) Engine resolution

    (5) Warmup

    (6) Jam recovery time

    (7) Printable area

    *1: When the PLC6/5c or the PS driver is used to print on A3W (12 x 18) paper, the maximum print area is 299mm x 450mm (11-49/64 x 17-45/64).

    * The printable area with the printer is the area excluding 4.2mm(5/32) from the each edge of paper.

    (8) Void area

    (9) Power source

    Type ConsoleColor support Full color

    Paper sizeBlack and white

    ColorMX-5500N MX-6200N MX-7000N

    A3W, 12 x 18 29 31 37 18A3, 11 x 17, 8K 30 33 38 19B4, 8.5 x 14, 8.5 x 13 35 38 44 22A4, A5R, B5, 8.5 x 11, 5.5 x 8.5R, 16K

    55 62 70 41

    A4R, B5R, 8.5 x 11R, 7.25 x 10.5R, 16KR

    40 44 51 26

    Extra 30 31 37 18

    Paper sizeBlack and white

    ColorMX-5500N MX-6200N MX-7000N

    A3W, 12 x 18 29 31 37 18A3, 11 x 17, 8K 30 33 38 19B4, 8.5 x 14, 8.5 x 13 35 38 44 22A4, A5R, B5, 8.5 x 11, 5.5 x 8.5R, 16K

    55 62 70 41

    A4R, B5R, 8.5 x 11R, 7.25 x 10.5R, 16KR

    40 44 51 26

    Paper sizeBlack and white

    ColorMX-5500N MX-6200N MX-7000N

    A3W, 12 x 18 29 30 35 13A3, 11 x 17, 8K 30 32 37 14B4, 8.5 x 14, 8.5 x 13, 8K 35 36 42 15A4, A5R, B5, 8.5 x 11, 5.5 x 8.5R, 16K

    55 62 70 27

    A4R, B5R, 8.5 x 11R, 7.25 x 10.5R, 16KR

    40 42 49 17

    OHP (A4, 8.5 x 11) 23 23 23 19OHP (A4R, 8.5 x 11R) 18 18 18 12OHP (Other) 13 13 13 9Extra 29 30 35 13Envelope 29 30 35 13Heavy paper (B5, A4, A5R, 8.5 x 11, 8.5 x 5.5R, 16K)

    23 23 23 19

    Heavy paper (Postcard HIGH) *1

    23 23 23 19

    Heavy paper (Postcard LOW) *1

    13 13 13 9

    Heavy paper (A4R, B5R, 8.5 x 11R/8.5 x 5.5R/16KR)

    18 18 18 12

    Heavy paper (Other sizes)

    13 13 13 9

    Photoconductor kind OPC (Drum diameter: Black; I80mm, Color; I30mm x 3)

    Copying method Electronic photo (Laser)Developing system Dry-type dual-component magnetic brush

    developmentCharging system Charged saw-tooth methodTransfer system Intermediate transfer beltCleaning system Counter blade Fusing system Heat roller Waste toner disposal No toner recycling system (With waste

    toner box)Toner supply during operation

    Available (Black only)

    Resolution [Writing]600 x 600dpi1200 x 600dpi (Black and white print only. Rotation output inhibited. The PS extension is required.)

    Smoothing function

    None

    Gradation [Writing] Black and white:

    2 levels (1bit) * 256 levels equivalent Color:

    PCL/PS3: Each color 2 levels (1bit)Each color 16 levels (4bits) * 256 levels equivalent

    FIERY: Each color 64 levels (6bits) * 256 levels equivalent

    Warmup time 360 sec or lessPre-heat Yes

    With the door open

    Approx. 60 sec

    After leaving the machine with the door open for 60sec, in the standard condition and the polygon stop conditions.

    A3W *1 297 x 420mm 12 x 18 *1 279 x 432mmA3 293 x 413mm 11 x 17 275 x 425mmB4 253 x 357mm 8.5 x 14 212 x 349mmA4 206 x 290mm 8.5 x 13 212 x 323mmB5 178 x 250mm 8.5 x 11 212 x 272mmA5 144 x 203mm 5.5 x 8.5 136 x 209mm7.25 x 10.5 180 x 260mm 8K 266 x 383mmPostcard 96 x 141mm 16K 191 x 263mm

    Void area Image loss

    Top: 4 mm or lessBottom: 4 mm or lessFR Total: 4 mm or less

    100V type 200V typeVoltage / Current 100 127V, 16A 220 240V, 8AFrequency 50/60HzPower source code

    Fixed type (direct) Inlet type

    Power switch 2 switches (Primary switch: in the front cover; Seconday switch: the operation panel)

  • MX-7000N SPECIFICATIONS 2 2

    (10) Power consumption

    * An option (finisher, inserter, punch unit, paper pass unit) is notincluded.

    (11) Noise

    (12) Dimensions

    (13) Weight

    (14) Dimensions occupied by Machine

    B. Paper feed unit/Transport/Paper exit secton(1) Paper feed section

    (2) Paper feed traya. Tray 1/Tray 2

    b. Tray 3/Tray 4

    (3) Manual feed tray (Bypass tray)

    100V type 200V typeMaximum rated power consumption

    1.8kW 1.84kW

    In action Black and white 7.3B or lessColor 6.8B or less

    Standby (Standby mode)

    Black and white/Color 5.5B or less

    Outer dimensions 795 (W) x 715 (D) x 1225 (H) mm (31-19/64 (W) x 28-9/64 (D) x 48-7/32 (H) inch)

    Footprint 795 (W) x 715 (D) mm (31-19/64 (W) x 28-9/64 (D) inch)

    Main unit Approx. 209 kg (460 lbs)Main unit + Developer + Toner cartridge Approx. 214 kg (471 lbs)

    Dimensions occupied by machine (with multi bypass extended)

    1130 (W) x 715 (D) mm (44-31/64 (W) x 28-9/64 (D) inch

    Form Standard: Fourfold feeder tray + multi bypassMaximum: Fourfold feeder tray (serial LCC + 2 trays) + multi bypass + large capacity feeder tray (Normal or large)

    Heater (Engine part) Service parts

    Tray 1 Tray 2Paper size A4, 8.5 x 11 A4, 8.5 x 11Changing of paper size

    Guide adjustment and size setting by serviceman

    Paper type setting YesDefault paper size setting

    Inch system: 8.5 x 11AB system: A4

    Feedable paper type/weight

    Plain paper: 60 105g/m2 (16 - 28lbs)

    Paper capacity 1200 sheets (80g/m2, 21lbs)

    800 sheets (80g/m2, 21lbs)

    Paper type Plain paper, pre-printed paper (not including backing paper), recycled paper, letter head, pre-punched paper, colored paper* Users can set up all of these paper types.

    Paper size detection NoDetection of remaining paper

    100%, 33%, 6%, none 100%, 50%, 9%, none

    Tray rising/falling time

    Rising: Within 12 seconds* Time required from tray insertion to empty

    detection without paper.Falling: Self-weight falling

    Tray 3 Tray 4Paper size A3W, A3, B4, A4, A4R,

    B5, B5R, A5R, 8K, 16K, 16KR, 12 x 18, 11 x 17, 8.5 x 14, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 7.25 x 10.5R, 5.5 x 8.5R, Special size (uncertain paper size) inhibited.

    A3W, A3, B4, A4, A4R, B5, B5R, 8K, 16K, 16KR, 12 x 18, 11 x 17, 8.5 x 14, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 7.25 x 10.5R

    Changing of paper size

    By users

    Paper type setting YesDefault paper size setting

    Maximum width of paper guide

    Feedable paper type/weight

    Plain paper: 60 105g/m2 (16 - 28lbs)

    Heavy paper 1 (including gloss paper):

    106 209g/m2 (28 - 56lbs)

    OHPLabel paper Tab paper

    Plain paper: 60 105g/m2 (16 28lbs)

    Heavy paper 1 (including gloss paper):

    106 209g/m2 (28 56lbs)

    Paper capacity Plain paper: 500 sheets (80g/m2, 21lbs)

    OHP: 40 sheetsHeavy paper: 80 sheetsTab paper: 40 sheetsGloss paper: 40 sheetsOther special paper:

    1 sheet

    Plain paper: 500 sheets (80g/m2, 21lbs)

    Paper type Plain paper, pre-printed paper (not including backing paper), recycled paper, letter head, pre-punched paper, colored paper, heavy paper 1, label paper, OHP, tab paper* Users can set up all of

    these paper types.

    Plain paper, pre-printed paper (not including backing paper), recycled paper, letter head, pre-punched paper, colored paper, heavy paper 1* Users can set up all of

    these paper types.

    Paper size detection

    AB auto detection: A3W, A3, B4, A4, A4R, B5, B5R, A5R, 8.5 x 13

    AB auto detection: A3W, A3, B4, A4, A4R, B5, B5R, 8.5 x 13

    Inch auto detection: 12 x 18, 11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 7.25 x 10.5R, 5.5 x 8.5R

    Inch auto detection: 12 x 18, 11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 7.25 x 10.5R

    Detection of remaining paper

    Level detection (3 levels: 100%, 67%, 33%, none)

    Paper size A3W, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR, 12 x 18, 11 x 17, 8.5 x 14, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 7.25 x 10.5R, 5.5 x 8.5R, Envelope (Monarch / Com-10 / DL / C5 / Rectangle 3 / Western 2 / Western 4)* For Western type 2 with the inserter installed,

    paper feed is inhibited.Extra Size (Tab paper is limited to A4; tab width 12mm-20mm / 8.5 x 11; tab width 6.1-17mm)

    Changing of paper size

    Guide adjustment by users

    Paper type setting YesFeedable paper type/weight

    Thin paper: 55 59g/m2 (15 16 lbs)Plain paper: 60 105g/m2 (16 28 lbs)Heavy paper 1 (including gloss paper):

    106 209g/m2 (28 56 lbs)Heavy paper 2 : 210 256g/m2 (56 68 lbs)Envelope: 75 90g/m2 (20 24 lbs)OHPLabel paperTab paperGloss paper

    Tray 3 Tray 4

  • MX-7000N SPECIFICATIONS 2 3

    (4) Double-sided

    (5) Paper exit tray (Center tray)

    (6) Paper exit tray unit (Right tray)

    C. Scanner section(1) Resolution/Gradation (or Levels)

    (2) Original cover

    (3) Duplex single pass feeder

    Paper capacity Plain paper: 100 sheets (80g/m2)Envelope: 20 sheetsOHP: 20 sheetsHeavy paper: 40 sheetsTab paper: 20 sheetsGloss paper: 20 sheets *Other special paper: 1 sheet* The gloss paper is sucked under a high humidity

    environment to cause double feed or misfeed. In such a case, manually supply paper sheet by sheet (Select heavy paper).

    Paper type Plain paper, pre-printed paper (excluding back print paper), recycled paper, letter head, pre-punched paper, colored paper, heavy paper 1, heavy paper 2, thin paper, label paper, OHP, tab paper, envelope.* Users can set up all of these paper types.

    Paper size detection

    AB auto detect

    A3W, A3, B4, A4, A4R, B5, B5R, A5R, 8.5 x 13, 8.5 x 11, 11 x 17

    Inch auto detect

    12 x 18, 11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5R, 7.25 x 10.5R, A3, B4, A4, B5

    For China (AB auto detect)

    A3W, A3, A4, A4R, B5R, A5R, 8K, 16K, 11 x 17, 8.5 x 13, 8.5 x 11

    For China (Inch auto detect)

    12 x 18, 11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 7.25 x 10.5R, 5.5 x 8.5R, A3, B4, A4, B5

    Detection of remaining paper

    Yes or No only

    Method Non-StackPaper size A3W, A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K,

    16KR, 12 x 18, 11 x 17, 8.5 x 14, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 7.25 x 10.5R, 5.5 x 8.5R

    Paper weight (for duplex operation)

    Plain paper: 60-105g/m2 (16-28 lbs)Heavy paper 1: 106-209g/m2 (28-56 lbs)

    Logo paper support For paper such as letterhead paper with front-back attributes, the engine control must be cared for printing side.

    Exit location/method Face down in the main unitExit capacity 250 sheets (A4 or 8.5 x 11 (color recommended

    paper)) Exit paper size/type All feedable paperExit tray full detection

    Yes

    Form Exit tray unit Transport standard Center standardEjecting location/method

    External ejection from the right face of the main unit / face-down ejection

    Tray capacity 100 sheets (A4 or 8.5 x 11 (color recommended paper))

    Ejected paper size/type

    Any feedable paper except heavy paper 2 (210 256g/m2 (56 68 lbs)), envelope and tab paper.

    Full tray detection Yes (Detection on the main unit)Installation Installation by service personnel.

    Scan resolution (dpi)

    Copy mode Black and white Color

    Original Cover

    600 x 600dpi600 x 300dpi (Default)

    600 x 600dpi (Default)

    DSPF 600 x 600dpi600 x 300dpi (Default)

    600 x 600dpi (Default)

    Transmission resolution (dpi)

    Image process

    (Scanner)100 x 100dpi / 200 x 200dpi / 300 x 300dpi / 400 x 400dpi / 600 x 600dpi(Internet Fax)200 x 100dpi (Half tone not allowed) / 200 x 200dpi / 200 x 400dpi / 400 x 400dpi / 600 x 600dpi(Fax)Standard (203.2 x 97.8dpi) (Half tone not allowed) / Fine (203.2 x 195.6dpi) /Super fine (203.2 x 391dpi) /Ultra fine (406.4 x 391dpi)

    PC-Fax/PC-Internet Fax

    200 x 100dpi / 200 x 200dpi / 200 x 400dpi / 400 x 400dpi / 600 x 600dpi

    Network TWAIN

    75dpi / 100dpi / 150dpi / 200dpi / 300dpi / 400dpi / 600dpi or custom: 50-9600dpi

    Exposure lamp XenonScan levels 10bitsOutput levels Fax mode: 1bit

    Internet Fax mode: 1bitScanner mode:

    Black and white: 1bitGray scale: 8bitFull color: Each color RGB 8bit

    Scan range 297 x 432mm (12 x 17)Original cover standard location

    Left back as standard

    Detection YesDetection size Auto detect

    Inch-1 11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5Inch-2 11 x 17, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5AB-1 A3, B4, A4, A4R, B5, B5R, A5AB-2 A3, A4, A4R, B5, B5R, A5, 8.5 x 13AB-3 B4, A4, A4R, A5, 8K, 16K, 16KR

    Manual detection size

    Yes

    Heater (Scanner part)

    Service parts

    Form DSPF (Duplex single pass feeder)Scan speed Black and white

    (A4/8.5 x 11)Color (A4/8.5 x 11)

    Copy 1-sided: 65 sheets/min (600 x 300dpi, 1bit)

    2-sided: 65 pages/min (600 x 300dpi, 1bit)

    1-sided: 35 sheets/min (600 x 600dpi,

    4bit)2-sided: 35 pages/min (600 x 600dpi,

    4bit)Fax 1-sided: 65 sheets/min

    (203.2 x 97.8dpi (Standard), 1bit)

    2-sided: 65 pages/min (203.2 x 97.8dpi (Standard), 1bit)

    Scanner 1-sided: 65 sheets/min (200 x 200dpi, 1bit)

    2-sided: 65 pages/min (200 x 200dpi, 1bit)

    1-sided: 35 sheets/min (200 x 200dpi, 8bit) (when in full color)

    2-sided: 35 pages/min (200 x 200dpi, 8bit)

    Internet Fax

    1-sided: 65 sheets/min (200 x 200dpi, 1bit)

    2-sided: 65 pages/min (200 x 200dpi, 1bit)

    Document set orientation

    Up standard

  • MX-7000N SPECIFICATIONS 2 4

    D. Fuser section(1) Type

    2. Functional specificationsA. Specifications of copy functions(1) Copy speed (Continuous copy speed) (cpm)a. Tray 1 - 4, LCC (Reduction/Normal/Enlargement)

    b. Large LCC (Reduction/Normal/Enlargement)

    * 8K and 16K are for China only.

    c. Manual feed (Reduction/Normal/Enlargement)

    *1: Switched by the service simulation setting

    (2) First copy time

    * Feeding A4/8.5 x 11 paper from the main unit tray 2 * Polygon in rotation * Auto Color Selection OFF/Auto Color for color OFF* Document tray lift-up complete state when the DSPF is used.

    Document standard location

    Center standard (Rear one-side standard for random feeding)

    Document transportation method

    Seat through method

    Document sizes Inch-1 11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5, A3, A4

    Inch-2 11 x 17, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5, A3, A4

    AB-1 A3, B4, A4, A4R, B5, B5R, A5, 11 x 17, 8.5 x 14, 8.5 x 11

    AB-2 A3, B4, A4, A4R, B5, B5R, A5, 11 x 17, 8.5 x 11, 216 x 330

    AB-3 A3, B4, A4, A4R, A5, 8K, 16K, 16KR, 11 x 17, 8.5 x 11, 216 x 330

    Long paper

    800mm (31-1/2) (Black and white 2 levels only)

    Mixed feeding (same type / same width) possible Random feeding (feeding of different types / different widths) Only the following combinations of 2 size types are allowed: A3 and B4; B4 and A4R; A4 and B5; B5 and A5; and 11-inch and 8.5-inch.

    Document weights

    1-side Thin paper

    35 49g/m2 (9 13 lbs)

    Plain paper

    50 128g/m2 (13 34 lbs)

    2-side 50 128 g/m2 (13 34 lbs)Document carrying capacity

    Maximum: 150 sheets (80g/m2, 21lbs), or Maximum thickness: 19.5 mm, 3/4 inch or less

    Types of document that may not be transported

    The following documents are NOT allowed: OHP, second original drawing, tracing paper, carbon paper, thermal paper, wrinkled / broken / torn document, document with cuts and pastes, documents printed by an ink ribbon, and perforated document (Perforated document by punch unit is allowed.)

    Paper detection YesPaper detection size Auto detection (Switching one type of detection

    unit through system setting)Inch-1 11 x 17, 8.5 x 14, 8.5 x 11,

    8.5 x 11R, 5.5 x 8.5, A3, A4Inch-2 11 x 17, 8.5 x 13, 8.5 x 11,

    8.5 x 11R, 5.5 x 8.5, A3, A4AB-1 A3, B4, A4, A4R, B5, B5R, A5,

    11 x 17, 8.5 x 14, 8.5 x 11AB-2 A3, B4, A4, A4R, B5, B5R, A5,

    11 x 17, 8.5 x 11, 216 x 330AB-3 A3, B4, A4, A4R, A5, 8K, 16K,

    16KR, 11 x 17, 8.5 x 11, 216 x 330

    Paper feeding direction Right hand feeding Simultaneous double-sided scanning

    Enable for either of B/W (black and white) and color.

    System Heat roller attachment system

    Paper sizeBlack and white

    ColorMX-5500N MX-6200N MX-7000N

    A3W, 12 x 18 29 31 37 18A3, 11 x 17, 8K 30 33 38 19B4, 8.5 x 14, 8.5 x 13 35 38 44 22A4, A5R, B5, 8.5 x 11, 5.5 x 8.5R, 16K

    55 62 70 41

    A4R, B5R, 8.5 x 11R, 7.25 x 10.5R, 16KR

    40 44 51 26

    Extra 30 31 37 18

    Paper sizeBlack and white

    ColorMX-5500N MX-6200N MX-7000N

    A3W, 12 x 18 29 31 37 18A3, 11 x 17, 8K 30 33 38 19B4, 8.5 x 14, 8.5 x 13 35 38 44 22A4, A5R, B5, 8.5 x 11, 5.5 x 8.5R, 16K

    55 62 70 41

    A4R, B5R, 8.5 x 11R, 7.25 x 10.5R, 16KR

    40 44 51 26

    Paper sizeBlack and white

    ColorMX-5500N MX-6200N MX-7000N

    A3W, 12 x 18 29 30 35 13A3, 11 x 17, 8K 30 32 37 14B4, 8.5 x 14, 8.5 x 13, 8K 35 36 42 15A4, A5R, B5, 8.5 x 11, 5.5 x 8.5R, 16K

    55 62 70 27

    A4R, B5R, 8.5 x 11R, 7.25 x 10.5R, 16KR

    40 42 49 17

    OHP (A4, 8.5 x 11) 23 23 23 19OHP (A4R, 8.5 x 11R) 18 18 18 12OHP (Other) 13 13 13 9Extra 29 30 35 13Envelope 29 30 35 13Heavy paper (B5, A4, A5R, 8.5 x 11, 8.5 x 5.5R, 16K)

    23 23 23 19

    Heavy paper (Postcard HIGH) *1

    23 23 23 19

    Heavy paper (Postcard LOW) *1

    13 13 13 9

    Heavy paper (A4R, B5R, 8.5 x 11R/8.5 x 5.5R/16KR)

    18 18 18 12

    Heavy paper (Other sizes)

    13 13 13 9

    Platen /

    DSPF

    MX-5500N MX-6200N MX-7000NBlack and

    whiteColor

    Black and

    whiteColor

    Black and

    whiteColor

    Platen 4.5 sec 8.4 sec 4.5 sec 8.4 sec 4.0 sec 8.4 secDSPF 9.0 sec 15.5

    sec9.0 sec 15.5

    sec9.0 sec 15.0

    sec

  • MX-7000N SPECIFICATIONS 2 5

    (3) Job speeda. Document changing speed (in copy mode)

    * The copy speed in combination of the main unit and the autodocument feed user is defined.

    * S to S: A4/8.5 x 11 document, 11 pages and 1 copy (not includ-ing the first copy)Black and white: 600 x 300dpiColor: 600 x 600dpi (default)

    (4) Continuous copy

    (5) Resolution

    (6) Copy document

    (7) Copy magnification ratio

    (8) Density, copy image quality processing

    (9) Color copy mode

    (10) Color adjustment

    (11) Copy functions

    MX-5500N MX-6200N MX-7000NBlack and

    whiteColor

    Black and

    whiteColor

    Black and

    whiteColor

    S to S 55cpm (100%)

    35cpm (85.4%)

    62cpm (100%)

    35cpm (85.4%)

    65cpm (92.9%)

    35cpm (85.4%)

    Multi max. number 999 sheets

    Scan resolution 600 x 600dpiWriting resolution 600 x 600dpi

    Document Max. A3 (11 x 17)Document type Sheet/Book original

    Copy magnification ratio

    Normal: 1:1r0.8%AB series: 25%, 50%, 70%, 81%, 86%, 100%,

    115%, 122%, 141%, 200%, 400% Inch series: 25%, 50%, 64%, 77%, 100%, 121%,

    129% , 200%, 400%Zoom 25 400% (25 200% for DSPF)Preset magnification ratio

    4

    XY zoom Yes

    Exposure mode Automatic (Color: Auto Color, Black and white: Character AE)Text,Text/Printed Photo, Print photo, Text/Photo, Photo, Map, Pale-color document.

    Copy document mode

    Effective for Text, Text/Printed photo, Printed photo mode.

    Color emphasis Effective for Text, Text/Printed photo, Printed photo, Text/Photo, Photo, Map mode.

    Manual steps 9 stepsToner save mode Black and white: Yes

    Color: YesOff on printed photo, photo or copy document

    Auto Color selection copy

    Copy mode automatically discerning color/black and white.

    Full color mode Enforced full color mode2-color mode Red-black mode (Change red point in document into

    other color)Mode to select black and another color from R/G/B/C/M/Y

    Single color mode Mode to select one color from R/G/B/C/M/YBlack and white copy mode

    Enforced black and white copy mode

    RGB adjustment YesColor balance YesSaturation adjustment YesBrightness adjustment YesContrast adjustment NoSharpness adjustment YesBackground removal YesAuto color calibration Allowed by system settingRegistration adjustment Allowed by system setting

    Function Automatic paper selection

    Yes (Mixed/random size feeding supported)

    Automatic magnification selection

    Yes

    Paper type select Yes(Type setting allowed)

    Auto tray switching YesRotated copy Yes

    Large rotated copy exceeding A4 supported

    Electronic sort YesJob reservation YesProgram call/registration

    Yes (Program name registration to be examined)

    Preheat function YesConditions set up by system setting

    Auto power shutoff YesConditions set up by system setting

    User authentication 1000Indeterminate document paper size input

    Yes

    Indeterminate paper size input

    Yes

    2-sided copy direction switch

    Yes

    Special function

    Margin shift YesEdge/center erase YesDual page copy YesTandem copy YesCover/insertion YesTab paper insertion Yes (Insertion only. Tab copy not

    allowed. Staple/Punch not allowed.)OHP insertion YesTab copy YesCentering Yes2in1/4in1 YesPamphlet YesCard shot YesBook copy YesLarge capacity document mode

    Yes

    Black-white inversion Yes (Only black-white copy allowed/color copy not allowed upon setup Not ready)

    Multi-page Enlargement

    Yes

    Mirror image YesPhoto repeat YesDate print YesCharacter print YesStamp YesPage printing YesProof copy YesMixed document feeder

    Yes (Random + MIX)

    Document control Yes (with Data Security Kit equipped)

  • MX-7000N SPECIFICATIONS 2 6

    B. Image send function(1) Mode

    (2) Image send function (Push send from the main unit)

    a. Support system

    b. Support image

    c. Image processing

    d. Specification of Addresses

    Scanner Scan to E-mailScan to DesktopScan to FTPScan to Folder(SMB)Scan to USB memory Scan to E-mail with MetaScan to Desktop with MetaScan to FTP with MetaScan to SMB with Meta

    Fax Fax to Fax (manual)Fax to E-mail (inbound routing)Fax to / FTP/Desktop/SMB/E-mail (Document Admin)

    Internet Fax

    Internet Fax to Internet Fax (manual)Internet Fax to E-mail (inbound routing)Internet Fax to FTP/Desktop/SMB/E-mail (Document Admin)* Full mode supported (including Simple mode)

    Item Scanner Internet FaxCorresponding server/protocol

    SMTPFTP(TCP/IP)SMB

    POP serverSMTP serverESMTP server

    Item Scanner Internet Fax FaxFile format Black and white:

    TIFF, PDF, Encrypted PDFColor: Gray scale, color TIFF, JPEG, PDF, Encrypted PDF

    Black and white: TIFF-FX (TIFF-F, TIFF-S)

    ---

    Compression method

    [Black and white] Non-compression G3 (1-dimensional)

    = MH (Modified Huffman)

    G4= MMR (Modified MR)

    [Color/Gray scale] JPEG (High, middle,

    low)

    MH, MMR MH, MR, MMR, JBIG

    Specified pages per size (number of page(s) specification allowed)

    Yes --- ---

    Item Scanner Internet Fax FaxOriginal scanning color

    Full color, gray scale, black and white

    black and white

    Auto color selection

    Color start key: Auto

    (judge as color: Full color, judge as black and white: Monochrome/gray scale)

    Full color black and white start key: Monochrome Gray scale

    ---

    Halftone reproduction

    Equivalent of 256 steps

    Density adjustment

    Auto + 5 steps (The image quaity of "Auto" is the same as that of "Manual = 3" when selecting full color/gray scale.)

    Auto + 5 steps

    Black and white enabled Auto Manual

    Color key enabled When selecting "Auto": Text/printed photo Text/photo Text

    When selecting "Manual": Text/printed photo Text/Photo Text Photo Printed photo Map

    ---

    Selection of image quality

    --- Half tone (Black and white only) ON/OFF

    Resolution (depends on file format/transmission method)

    100 x 100 dpi 200 x 100dpi(Half tone not allowed)

    Standard (203.2 x 97.8dpi) (middle tone not allowed)

    200 x 200 dpi 200 x 200dpi Fine (203.2 x 195.6 dpi)

    300 x 300 dpi 200 x 400dpi Super (203.2 x 391dpi)

    400 x 400 dpi 400 x 400dpi Ultra (406.4 x 391 dpi)

    600 x 600 dpi 600 x 600dpi ---Moire reduction mode

    Yes ---

    DSPF duplex simultaneous scanning

    Yes (Black and white)Yes (Color) ---

    Notes' security feature

    Yes Yes ---

    Item Scanner Internet Fax FaxAddress specification

    Specification by one-touch/group/direct address entry. Entry from soft keyboard. (Scanner/Internet Fax) Entry from 10-key. (Fax) Selection from LDAP serverInput from the externally connected keyboard

    Setting of default address *1

    Yes ---

    Number of One-touch address key registration

    Total (number of key): Maximum 999

    Number of Group (1 key) address registtation

    Number of Group (1 key) address registration : maximum 500 Number of Group key registration : 5000 (Total address number included in /999 key)

    Program 48Direct entry of addresses

    Input from the soft keyboard and the externally connected keyboard

    Entry by 10-key, # key, * key

    Chain dial --- Yes (pause key)Resend Call up nearest 8 addresses which are specified as a

    single destination. *2

    Shortcut for address selection (quick key)

    Use the 10-key to call up registered numbers of addresses.

    CC/BCC sending Yes ---

    Item Scanner Internet Fax Fax

  • MX-7000N SPECIFICATIONS 2 7

    *1: The scanner mode allows setting the default address. To transmit data, users only have to set the original and press the start key.

    *2: Except for FTP, Desktop, SMB, USB memory and Broadcast.*3: Function to set up a text message that will be added

    automatically to the message body upon mail transmission. Editing upon transmission is not allowed.

    e. Specification of Multiple Addresses

    * Broadcast transmission by Scanner, Internet Fax and Fax isallowed. (Black and white (2 value))

    f. Transmission function

    g. Reception function

    Subjet Selective/direct entry from the list ---File name Selective/direct entry from the listReturn mail address

    Selective/direct entry from the list/selection from LDAP server

    ---(1 default address fixed as sender name)

    ---

    Transmission message (message body)

    Selective/direct entry from the list.(Number of characters: Maximum of 1800 half-size characters (900 full size characters))

    ---

    Mail footer preset *3

    Yes ---

    Inhibition of address registration from the main unit

    Yes

    Inhibition of address registration from a Web screen

    Yes

    Inhibition of registration from the network scanner tool

    Yes

    Inhibition of "Resend" in the FAX/image send mode

    Yes

    Inhibition of selection from an address book

    Yes

    Inhibition of direct input

    Yes

    Inhibition of send from the PC Internet Fax

    Yes

    Inhibition of send of PC-Fax

    Yes

    Item Scanner Internet Fax FaxBroadcast Yes (500 destinations)

    (E-mail/FTP/Desktop allowed)

    Yes (500 destinations)

    Item Scanner Internet Fax FaxMemory transmission

    94 destinations in all

    On-hook --- YesQuick online transmission

    --- Yes

    Direct transmission --- Yes (Switching: Memory transmission l Direct transmission)

    Automatically-reduced transmission

    --- Yes

    Rotated transmission

    --- Yes

    Item Scanner Internet Fax FaxScaled transmission Yes

    Enlargement/reduction is allowed only from a fixed size to another. Reduction may be done on the receiver side with Internet Fax sending.

    Recall mode

    Busy --- --- Yes--- --- Number/time

    to be set up through system setup

    Long original transmission

    YesMaximum of 800mm (single side only/black and white 2 values only)

    Change of the number of pages for each file

    Yes ---

    Restriction on transmission size

    Yes ---

    Large capacity original mode

    Yes

    Scanning of thin paper

    Yes

    Mixed originals feeder

    Yes (Random + MIX)

    Default date sender transmission

    --- Yes (ON only)

    Item Internet Fax FaxAutomatic reception YesManual reception Yes Yes

    Switching from manual reception to automatic reception. (France only)

    Memory reception YesFixed size reduced reception

    Yes

    Rotated reception YesSetting of received data print condition

    --- Equal size print (partition not allowed)Equal size print (partition allowed)Equal or reduced size print

    2-sided reception Condition setting through system settingAutomatic reduction setting upon receiving A3

    Yes (North America only)

    Yes(North America, Philippine only)

    Automatic reduction setting upon receiving letter

    Yes(except North America only)

    Yes(except North America, Philippine only)

    Address/Domain-specified reception allowed

    Yes (50 domains) ---

    Address/Domain-specified reception not allowed. (To be rejected)

    Yes (50 domains) ---

    Reception from a specific number not allowed. (To be rejected)

    --- Specified numbers only (50 numbers /20 digits)

    External phone connection remote

    --- Yes

    Received data bypass output

    Yes

    Reception confirmation cycle setting

    Setting by 0-8 hours (Each minute)

    ---

    POP3 communications timeout setting

    Setting by 30-300 seconds (Every 30 seconds)

    ---

    Body text print select setting

    Yes ---

    Transfer function upon disabling of output.

    Yes (1 receiver (of transfer) registration)

    Item Scanner Internet Fax Fax

  • MX-7000N SPECIFICATIONS 2 8

    h. Report/list function

    i. Other Functions

    * E-mail address can be set for the F-code relay broadcast.

    j. Transmission method

    k. Record size

    l. F code communication

    m. Registration-related settings

    Rooting functionInternet Fax/Fax to E-mail (Transfer of Internet Fax/Fax reception data to E-mail, inbound routing)

    Yes

    Exit tray setting YesSetting set of received data

    --- Yes

    Staple function of received data

    --- Yes

    Auto wake up print YesReceived data print hold function

    Yes

    Item Scanner Internet Fax FaxImage sending activity report

    YesTime-specified output Output with memory full * Maximum of 200 times including both

    transmission and receptionTransaction report YesAddress/phone number table

    Yes

    Group table YesProgram table YesMemory box table (F code)

    --- Yes

    Communication original contents print

    --- Always print/Upon error/no print

    List of rejected reception numbers

    --- Yes

    List of addresses allowed or not allowed for reception

    --- Yes ---

    Inbound routing table list

    No Yes

    Document Admin list Yes

    Item Scanner Internet Fax FaxTime specification

    Yes

    Polling reception --- YesBulletin board transmission

    --- YesUp to 100 registrations allowed with bulletin board, confidential and relay broadcast all combined. (Free area: 1 registration)Setting of the number of transmission: 1 / no limit.

    Own number sending

    --- Yes

    Own name select --- YesPage number print

    --- Yes

    Date print --- Yes (Date can be expressed alternatively)

    Polling protection function

    --- Yes

    Page partition transmission

    Yes

    Confidential (receiver unit)

    --- Yes (F code method)

    Relay broadcast instructions

    --- Yes (F code method)

    Fax to E-mail (F code) *

    --- Yes

    Edge erase Yes

    Item Internet Fax FaxCenter erase Yes2 in 1 No

    (Allowed for Fax /Internet Fax broadcast)

    Yes

    Background removal

    Yes(Only color and gray scale)

    ---

    Card scan Yes (Equivalent or enlargement up to the paper width. The maximum enlargement is not allowed to exceed 200%)

    Confirm transmission

    --- YesTimeout time Setting for 1 minute 240 hours/each minute

    ---

    Forward data transmission/reception

    Yes

    Item FaxTransmission time 2 seconds level (Super G3 / JBIG)

    6 seconds level (G3 ECM)Modem speed Automatic fall-back : 33.6kbps o 2.4kbps Intercommunication Super G3 / G3Communication line

    General membership telephone line (PSTN), independent business line (PBX), F net.R-key for PBX setting: Germany, France

    Maximum number of lines

    1 line only

    ECM Yes

    Item Internet Fax FaxMaximum record width 293mm (11-17/32)Record size A3 A5 (11 x 17 5.5 x 8.5)

    Item FaxSub-address Yes (20 digits)Password Yes (20 digits)

    Item Scanner Internet Fax

    Fax

    One-touch/group *1E-mailFTPDesktopSMBInternet FaxFax

    999 destinations (Max. 200 items for FTP, Desktop, and SMB)Use of LDAP allowed Up to 500 registered addresses for each group dial.Registered name in 18 full-size character (36 half-size characters)Fax only:One-touch dial receiver number registration: within 64 digits for receiver number + sub-address + passcode (including /).

    Default address setup

    Yes ---

    Desktop registration

    YesRegistration by using Web or NST (network scanner tool)

    ---

    Program Registration of addresses (groups), settings (density, image quality) and special functions in one set is allowed. (48 of them)

    Item Scanner Internet Fax Fax

  • MX-7000N SPECIFICATIONS 2 9

    *1: Since Scanner/Internet Fax/Fax uses the common address book, the number of addresses allowed for registration is the sum total of all modes.

    *2: The book for address selection is used when a scan sender is selected.

    *3: Quick key is the function to select an address based on the registered number of each address within the book for address selection. Users should be able to select a quick key number.

    n. Telephone functions

    o. Sound settings

    *1: Large/middle/small. Setup by the system settings.*2: 14 levels and no sound. Setup by the system settings.*3: PATTERN 1/2/3/4. Setup by the system settings.

    Different sound should be selectable for each of reception / transmission success/transmission and reception error.

    *4: Setup by the system settings. 5 steps of 2.0 - 4.0 seconds.*5: Setup by the system settings. 2-steps setting for every 0.3 or

    0.7 second.

    p. Others

    C. PC-Fax functions(1) PC-Fax/PC-Internet Fax operating environment

    (2) PC-Fax/PC-Internet Fax functions

    Number of memory boxes

    --- Total 100 can be registered including bulletin board / confidential / relay broadcast.Registration name: 9 full-size characters (18 half-size characters)

    Reply-To registration

    1000 (user registration from Web) *2E-mail only

    ---

    Number of sender registration

    --- 1 (20 characters)

    1 (default) with 20 characters

    Number of sender selection registration

    --- Total: 18 registrations (20 characters) (Sender selection: In addition to default, 18 registrations allowed)

    Registration of polling approval number

    --- 10 numbers / 20 digits

    Quick key (short cut registration) *3

    Yes (001 999)

    Retrieving/scanning of registered data to other model

    Yes (By address book conversion utility)

    Import/export of address book

    Yes (By storage backup)

    Item FaxOn-hook function YesSetting of pause time Yes (1-15 seconds) Telephone transmission during power outage

    No (External telephone transmission allowed)

    Tone pulse switching Availability of setting (10 / 20 / TONE / auto detection) and their default values are different depending on destination.

    Item Scanner Internet Fax FaxOn-hook sound Sound volume

    setting--- Yes *1

    Sound volume for calling

    Sound volume setting

    --- Yes *2

    Line monitor sound

    Sound volume setting

    --- Yes *2

    Reception sound

    Sound volume setting

    --- Yes *1 Yes *2

    Sound pattern --- Yes *3

    Transmission success sound

    Sound volume setting

    --- Yes *2

    Sound pattern --- Yes *3

    Time setting for communication ending sound

    --- Yes *4

    Item Scanner Internet Fax

    FaxTransmission and reception error sound

    Sound volume setting

    --- Yes *2

    Sound pattern --- Yes *3

    Time setting for communication ending sound

    --- Yes *5

    Communication error sound

    Sound volume setting

    --- Yes *2 ---

    Sound setting for end of original reading (image send)

    Sound volume setting

    Yes *1

    Item Scanner Internet Fax FaxPC-Fax --- YesPC-Internet Fax --- Yes ---FAST --- Yes

    (U.S.A only)Distinctive ring detection

    --- Setting for each destination

    Trial mode Scanner: Yes (Standard)Meta data: Yes

    No ---

    OS Windows 98Windows MeWindows NT4.0 Workstation (Service Pack5)IE4.0 or moreWindows 2000Windows XP Home EditionWindows XP ProfessionalWindows Server 2003

    PC IBM PC/AT compatible machineCPU Pentium II 300MHz or moreMonitor 640x480 Pixels or more of screen resolution

    256 or more of colorsMemory 64MB or moreHDD Free space of 50MB or more Interface USB2.0

    10/100BASE-TXCommunications protocol

    LPR/lp, Port9100(RAW), IPP, USB2.0

    PC-Fax Send Yes (with Fax equipped)Maximim of 64 digits for Fax number (including sub-address and passcode)

    PC-Internet Fax Send Yes (Necessary options: Internet Fax expansion kit) Maximum of 64 digits for Internet Fax address

    Resolution 200 x 100 dpi/200 x 200 dpi/200 x 400 dpi/400 x 400 dpi

    Transmission original sizes

    A3/B4/A4/A5/B5/11 x 17/8.5 x 14/8.5 x 13/8.5 x 11/5.5 x 8.5/8K/16K

    Compression method MH/MMRBraodcast transmission Yes (Fax, Internet Fax mixture possible.

    Maximum of 500)

    Item Scanner Internet Fax Fax

  • MX-7000N SPECIFICATIONS 2 10

    D. Remote PC Functions (Network TWAIN)Pull scan (TWAIN) specification

    E. Printer function(1) Platform

    (2) Support OS

    *1: The driver for Windows NT is not bundled in the CD-ROM included in the package.

    (3) Command system

    (4) Installed fonts

    (5) Support print channel

    (6) Command compatibility

    F code transmission Yes Sub-address Yes maximum of 20 digits

    Passcode Yes maximum of 20 digits

    Phone book registration/transmission function

    Yes

    Attach a cover sheet function

    Yes (Not allowed for bradcast transmission)

    Create cover sheets function

    Yes

    Own number send Yes (Always printed) Preview function YesTransmission confirmation (Notice to PC by NJR)

    Yes

    Document filing function Filing YesQuick File Yes

    PC-Fax Transmission log

    Yes (Re-transmission not allowed)

    User authentication YesR-KEY (Germany/France only)

    Yes

    Interfaces LAN YesUSB No

    OS's Windows 98/Me/2000/XP/2003 ServerWHQL validated OS's Windows 2000/XPHardware environment System: Must satisfy the operational conditions

    for each OS.HDD: 10MB or more: 100MB or more recommended.Monitor: 800 x 600 dots or more; 256 or more of colors must be available.Other: Network port

    2-sided scan YesColor modes Mono 2 gradation/Mono Diffusion/Gray scale/

    Full ColorResolutions 75dpi/100dpi/150dpi/200dpi/300dpi/400dpi/

    600dpi or custom: 50-9600dpiScanning ranges A3/A4/A4R/A5/A5R/B4/B5/B5R/11 x 17/

    8.5 x 14/8.5 x 13/8.5 x 11/8.5 x 11R/7.25 x 10.5/7.25 x 10.5R/5.5 x 8.5/5.5 x 8.5R/8K/16K/16KR/Auto/Auto(Mixed size)/Custom* "Auto" includes the same width (Mix).

    "Auto (Mixed size)" means random.Preview function YesZoom preview function YesRotated scan Yes (90-degree/ 180-degree/ 270-degree)Brightness/contrast adjustment

    Auto/manual (-100 +100)

    Gamma adjustment YesColor matching None/For Printer/For CRT/For LCD/ICMEdge emphasis None/Normal/Sharp/BlurBlack-white inversion YesSelection of illuminant color

    Yes (Red/Green/Blue/White)

    Selection of threshold value

    Auto/manual (1 254)

    Addition of void area Allowed (4 sides; 2.5mm for each)Save of setup contents YesSave of preview image YesDisplay unit of scanning range

    Pixel/mm/inch

    Notes's security function

    Yes

    Image acquision method from the main unit

    Non-compression

    IBM PC/AT compatible machine Macintosh

    Custom PCL5c/6

    Windows 98/MeWindows NT 4.0 SP5 or later *1Windows 2000Windows XPWindows Server 2003

    Custom PS

    Windows 98/MeWindows NT 4.0 SP5 or later *1Windows 2000Windows XPWindows Server 2003

    PPD Windows 98/MeWindows NT 4.0 SP5 or later *1Windows 2000Windows XPWindows Server 2003MacOS 9.0-9.2.2, x 10.1.5, x 10.2.8, x 10.3.3 10.3.9, x 10.4

    PCL5c compatible StandardPCL6 compatibleBMLinkS NoPS3 compatible Option (PS3 expansion kit: MX-PKX1)Fiery controller Adobe PostScript3

    Option (Fiery print controller: MX-PEX2)

    Standard PCL5c/PCL6 Roman outline fonts = 80 types Line printer font (Bitmap) = 1 type

    Option PCL5c/PCL6 Bar code fonts = 28 types (Can be provided by the flash ROM kit as well)

    PS3 Roman outline fonts = 136 types

    USB USB 1.1: Windows 98/Me/2000/Server 2003/XP onlyUSB 2.0 (High speed): Windows 2000/XP only

    PSERVER/RPRINT for NetWare environment

    Print channel in PSERVER/PRINT mode to be used in netware environment

    LPR UNIX LPR/LPD command-compatible print channel IPP Print channel in compliance with IPP1.0 PAP: EtherTalk (AppleTalk)

    Print channel to be used for Machintosh environment

    FTP Equipped with the function to print data received via built-in FTP server

    NetBEUI Microsoft NetBEUI compatible print channelPort9100 9100 TCP port (Raw Port) supported HTTP Web Submit Print supportedPOP3 E-Mail To Print supported

    PCL5c compatibility

    PCL5c must be compatible with HP Color Laser Jet 4600.

    PCL XL compatibility

    PCL XL must be compatible with HP Color Laser Jet 4200. PCL CXL must be compatible with HP Color Laser Jet.

    PostScript3 compatibility

    Must be compatible with Adobe PS3.

  • MX-7000N SPECIFICATIONS 2 11

    (7) Environmental settings

    (8) Print functions

    Setting item OverviewInitial setting Basic settings for printer use such as number of copies

    or printing direction.PCL seting Setting of PCL symbols and fonts PS setting Whether or not printing is allowed upon PS error is to

    be set up.

    Function Content PCL6/5c PS (Option)Multiple Pamphlet Binds multiple pamphlet outputs into a single booklet. Yes YesBar code font JetCAPS BarDIMM emulation Yes NoNetwork tandem print Two units connected via network can be used simultaneously for a printout. Yes Yes (Windows

    only) Windows Cluster Print When a Windows server breaks down, a mirror server takes over and executes the suspended

    print job.* There may be color differences between machine types

    Yes Yes (Windows only)

    Encryption PDF/PDF/TIFF/JPEG direct print

    PDF/TIFF/JPEG file can be printed without printer driver.1) Printing of e-mail attachment file2) Printing from FTP server3) Printing from setup file on Web page4) USB memory

    Yes (No for encrypted PDF/PDF)

    Yes

    E-Mail To Print Direct printing of an attached file upon receipt of the e-mail. Yes YesPull print from front panel Browsing of FTP server from front panel and pull-printing of a specified file (direct printing). Yes YesFTP push print Performs direct print by data transfer from the client PC to the MFP server. Yes YesPrint by file setup on Web page [Web Submit Print]

    Setting and direct printing of a file on network through Web page. Yes Yes

    Continuous print function The function executes multiple print jobs continuously as if they are one single job even if the unit receives an end of job command, in order to support print from the application assuming printout on continuous pages.

    Yes Yes

    ROPM The function enables the printout of a multiple number of copies in one RIP processing. Yes YesMulti-access RIP processing must be allowed during printing. Printing must also be allowed during scanning. Yes YesPaper direction setting for 2-sided printing of letterhead paper and pre-punched paper.

    Pages with front-back attribute such letterhead or punch paper are to be printed correctly in front-back page order for 2-sided printing.

    Yes Yes

    Enable detection of selected paper type in bypass tray

    For setting of bypass tray, even if the setup values on the main unit side do not match with those on the driver side, the printing will be executed in the setting of the driver regardless of the setup values on the main unit side.

    Yes Yes

    Setting environmental control under terminal server control

    Print setting of each client is memorized under meta frame environment (auto print create environment). (Setup for each log-in can be skipped.)

    Yes Yes

    Driver delivery function PAU4.0 allows the administrator to deliver a driver to clients. Yes YesForm overlay The function downloads a form to the main unit beforehand, sends the contained data only, and

    inserts the data into the form in the main unit for printout.Yes

    (PCL5c only)No

    Planet Press Object Lune Corporation's Planet Press (Software to execute the mapping of forms (DL beforehand) and variable data in the printer interior)

    Yes Yes

    Management of password by hidden Web page

    The purpose is to prevent the access even if the hidden Web page address becomes known. Yes Yes

    Expansion font list In self-print of a font list, ESC command information is needed for BITMAP font. Yes(PCL5c only)

    Yes

    Bonjour for Macintosh environment

    This technology detects and connects peripheral equipment on the network automatically.The dynamic network connection (computer, peripheral equipment and software) is possible without user setting.

    No Yes

    Document control print When printing, the unique pattern for prevention against unauthorized copy is embedded in printing.

    Yes (Option) Yes (Option)

    Object judgement (screen change/color change)

    In the printer color mode output, object of image data (area of photograph/graphic text) is judged. Print screen (resolution) and profile (color) are changed automatically.

    PCL6: YesPCL5c: No

    Yes

    CMYK Simulation Choice of CMYK simulation is as follows. 1) Default2) CustomDefault is defined depending on the destination of service simulation.1. Japan = Japan Color 2. North America, China, Other abroad inch type = SWOP 3. Europe, Other abroad AB type = Euroscale

    Custom profile can upload by Web setting. Notation of driver is Custom. Example: Use DIC authorization profile. Use SWOP profile in Japan.

    No Yes

  • MX-7000N SPECIFICATIONS 2 12

    (9) Windows driver functionPS: Option (Installation of the PS3 expansion kit (MX-PKX1) arerequired.)

    a. Image Quality

    *1: Cannot be specified with the black and white mode.*2: Cannot be used in Windows NT.*3: Can be specified only with the black and white mode.*4: Cannot be used in PCL5c.

    b. Image Layout

    *1: Pamphlet processing by MFP/Printer firmware.*2: Margin Shift processing by MFP/Printer firmware.*3: Cannot be used in PCL5c.

    ICC Profile Choice of source profile is as follows.1) sRGB2) AppleRGB3) CustomCustom profile can upload by Web setting. (The attached ICC profile on devices is available.)

    There is no user selection for output profile. Sharp provides Custom profile. Upload of profile supported by service. The tool can be set on the Web (service setting). The concrete method of profile making is to be considered separately.

    Yes Yes

    Pantone color For Pantone color support, the profile upload can be made by Web setting. No Yes

    Function Content PCL6/5c PS (Option)

    Function PCL6/PCL5c PS

    Resolution 1200x600dpi (black and white only)

    No Yes

    600x600dpi Yes Yes300x300dpi Yes No

    Color Mode Auto Yes YesColor (CMYK)Monochrome (K only)

    ICM Method *1 OFF Yes YesSystem (Windows ICM).Effective only when Color Options is Custom.

    Yes *2 Yes *2

    Printer Yes YesRendering Intent *1 When ICM Method is anything

    other than Custom: DefaultDefault

    Yes Yes

    When ICM Method is Custom: Perceptual matchingRelative colorimetricSaturation matchingAbsolute colorimetric

    ICC Profile Selection *1

    Source Profile (Monitor Profile) Yes YesWhen Windows ICM is off:

    NonesRGBApple RGBCustom

    When Windows ICM is on:Monitor Profile installed in PC

    Print Priority *1 1 bit Yes Yes4 bit Yes Yes

    Contrast 0-100 Yes YesBrightness 0-100 Yes YesSaturation *1 0-100 Yes YesColor Balance (RGB) *1

    0-100 Yes Yes

    Text To Black *3 On / Off Yes YesVector To Black *3 On / Off Yes YesToner Save (1bit only)

    On / Off Yes Yes

    Screen Setting *1 Default Yes YesPhotoText & Graphic

    Pure Black Print *1 On / Off No YesBlack Over Print *1 On / Off No YesCMYK Simulation *1 On (Default/Custom) / Off No YesBitmap Compression

    NoneVery High QualityHigh QualityMedium QualityDraft

    Yes *4 Yes

    Image Type Standard / Graphics / Photo /CAD / Custom

    Yes Yes

    Neutral Grays *1 Black Only4-Color

    Yes Yes

    Function PCL6/PCL5c PS

    Paper Size A2 (Fit To Page) Yes *3 NoA3 Wide / 12 x 18 /A3 / A4 / A5 / B4 / B5 / 11 x 17 / 8.5 x 11 / 8.5 x 14 / 7.25 x 10.5 / 8.5 x 13 / 5.5 x 8.5 / 8K / 16K / DL / C5 / COM10 / Monarch / Custom Paper

    Yes Yes

    Orientation Portrait / Landscape Yes YesRotate 180 degrees On / Off Yes YesN-Up Printing 1-Up / 2-Up / 4-Up / 6-Up /

    8-Up / 9-Up / 16-UpYes Yes

    Black N-Up Border On / Off Yes YesN-Up Order [2-Up]:

    Left to Right / Right to LeftYes Yes

    [4, 6, 8, 9, 16-Up]:Right, and Down / Down, and RightLeft, and Down / Down, and Left

    Fit To Page A3 Wide / 12 x 18 /A3 / A4 / A5 / B4 / B5 / 11 x 17 / 8.5 x 11 / 8.5 x 14 / 7.25 x 10.5 / 8.5 x 13 / 5.5 x 8.5 / 8K / 16K / DL / C5 / COM10 /Monarch / Custom Paper

    Yes Yes

    Poster 2x2 Yes *3 Yes3x3 Yes *3 Yes4x4 Yes *3 Yes

    Poster Dash Border On / Off Yes *3 YesPoster Overlap On / Off Yes *3 YesDuplex 2-Sided (Book) Yes Yes

    2-Sided (Tablet)Pamphlet *1 2-Up Pamphlet Yes Yes

    Tiled PamphletMultiple 2-Up PamphletMultiple Tiled Pamphlet

    Margin Shift *2 None / 10mm (0.4inch) / 20mm (0.8inch) / 30mm (1.2inch)

    Yes Yes

    Zoom 25 % - 400 % Yes YesX-Y Zoom No Yes

    Mirror Image No Mirror Image No YesVerticalHorizontal

  • MX-7000N SPECIFICATIONS 2 13

    c. Watermark / Overlay

    *1: Cannot be used in PCL5c.

    d. Paper Control

    *1: Cannot be used in PCL5c.

    e. Finishing

    f. Copies

    *1: Copy processing by MFP/Printer firmware

    g. Object Control

    h. Job Handling

    i. Configuration

    (10) Windows PPD, Macintosh driver functionsa. Image Quality

    Function PCL6/PCL5c PS

    Watermark Transparent Text Yes YesOverwrite Text Yes YesOutline Text Yes YesImage Stamp Yes *1 Yes

    Overlay Create Overlay Yes YesLoad OverlayDeleteQuery Page Overlay

    Function PCL6/PCL5c PS

    Paper Selection Paper Source Yes YesPaper TypeTray Status Yes Yes

    Different Paper Cover Page Yes YesLast Page Yes YesOther Page Yes Yes

    Transparency Inserts

    Blank / Printed Yes Yes

    Tab Printing Image Shift Yes YesTab Paper Printing Yes *1 No

    Output Tray Center TrayRight TrayOffset TraySaddle Stitch Tray

    Yes Yes

    Function PCL6/PCL5c PS

    Staple None1-Staple2-Staples

    Yes Yes

    Punch YesNo

    Yes Yes

    Binding Edge TopLeftRight

    Yes Yes

    No Offset On / Off Yes Yes

    Function PCL6/PCL5c PS

    Copies *1 1-999 Yes YesCollate On / Off Yes YesCarbon Copy Top Copy

    Carbon CopyYes Yes

    Function PCL6/PCL5c PS

    Font Source Resident FontDownload Font

    Yes Yes

    Download Font Type

    TrueType(Type 42) Yes YesBitmap(Type 3) Yes YesAdobe(Type 1) No YesAs Graphics Yes No

    Graphics Mode VectorRaster

    Yes No

    PS Pass Through On / Off No YesPS Error Printing On / Off No YesJob Compression None / Fastest / Fast /

    Medium / Best CompressionNo Yes

    Function PCL6/PCL5c PS

    Retention Hold OnlyHold After PrintSample PrintPassword

    Yes Yes

    Document Filing Quick FileMain FolderCustom Folder

    Yes Yes

    User Authentication Login NamePassword

    Yes Yes

    Job ID User NameJob Name

    Yes Yes

    Notify Job End On / Off Yes YesAuto Job Control Review

    On / Off Yes Yes

    Tandem Print On / Off Yes Yes

    Function PCL6/PCL5c PS

    Auto Configuration Yes YesSet Tray Status Set Paper Size

    Set Paper TypeYes Yes

    Paper Type Name (USER TYPE 1 - 7)

    Display Name Yes Yes

    Font Substitution No YesSet Tandem Print IP Address (Slave Machine) Yes YesInput Tray Options Four Trays Yes YesLarge Capacity Tray

    Large Capacity Tray (A3W/12x18)

    Large Capacity Tray (A4/8.5x11)

    Yes Yes

    Output Tray Options

    NoneFinisherSaddle Stitch Finisher

    Yes Yes

    Punch Module None / 2 Holes / 3 Holes / 4 Holes / 4 Holes (Wide)

    Yes Yes

    Right Tray On / Off Yes Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Resolution 600x600 dpi Yes Yes Yes YesColor Mode Auto

    Color(CMYK)Monochrome(K only)

    Yes Yes Yes Yes

    ICM MethodColorSync *1

    OFF Yes Yes No YesSystem Yes *2 Yes No Yes

    *3Printer Yes Yes Yes Yes

    Rendering Intent *1

    [Mac OS]Perceptual matchingRelative colorimetricSaturation matchingAbsolute colorimetric

    [Windows]GraphicsPicturesProofMatch

    Yes Yes Yes Yes

    ICC Profile Selection *1

    Source Profile(Monitor Profile)sRGBApple RGBCustom

    Yes Yes No Yes *3

    Print Priority 1 bit Yes Yes Yes Yes4 bit Yes Yes Yes Yes

    Brightness *4 0-100 No No No YesSaturation *4 0-100 No No No Yes

  • MX-7000N SPECIFICATIONS 2 14

    *1: Specification depending on OS.*2: Cannot be used in Windows NT.*3: Can be used in MacOSX 10.3.*4: Some OS may not allow one-number-to-next specification for

    setup values.

    b. Image Layout

    *1: Some OS may not support a custom size setting.*2: Specification depending on OS.*3: Cannot be used in Windows NT.*4: Windows 9x: 1-Up / 2-Up / 4-Up.*5: Pamphlet processing by MFP/Printer firmware.

    c. Watermark

    * Specification depending on OS.

    d. Paper Control

    e. Finishing

    f. Copies

    *1: Specification depending on OS.

    g. Object Control

    *1: Specification depending on OS.

    h. Job Handling

    Toner Save (1bit only)

    On / Off Yes Yes Yes Yes

    Screen Setting DefaultPhotoText & Graphic

    Yes Yes Yes Yes

    Pure Black Print

    On / Off Yes Yes Yes Yes

    Black Over Print

    On / Off Yes Yes Yes Yes

    CMYK Simulation

    OffDefaultCustom

    Yes Yes Yes Yes

    Image Type Standard / Graphic / Photo / CAD / Custom

    Yes Yes Yes Yes

    Neutral Grays Black Only4-Color

    Yes Yes Yes Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Paper Size Setting *1

    A3 Wide / 12 x 18 / A3 / A4 / A5 / B4 / B5 / 11 x 17 / 8.5 x 11 / 8.5 x 14 / 7.25 x 10.5 / 8.5 x 13 / 5.5 x 8.5 / 8K / 16K / DL / C5 / COM10 / Monarch / Custom Paper

    Yes Yes Yes Yes

    Orientation PortraitLandscape

    Yes Yes Yes Yes

    Rotate 180 degrees (Landscape only)

    On / Off Yes Yes No Yes

    N-Up Printing *2

    1-Up / 2-Up / 4-Up / 6-Up / 9-Up / 16-Up

    Yes *3 *4

    Yes Yes Yes

    Black N-Up Border *2

    On / Off No Yes Yes Yes

    N-Up Order *2 [2-Up]:Left to RightRight to Left

    [4, 6, 8, 9, 16-Up]:Right, and DownDown, and RightLeft, and DownDown, and Left

    Yes Yes Yes Yes

    Duplex 2-Sided (Long)2-Sided (Short)

    Yes Yes Yes Yes

    Pamphlet *5 Tiled PamphletMultiple Tiled

    Pamphlet

    Yes Yes Yes Yes

    Margin Shift None / 10mm / 20mm / 30mm

    Yes Yes Yes Yes

    Zoom 25 % - 400 % Yes Yes Yes YesMirror *2 None

    VerticalHorizontal

    Yes Yes No No

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3 FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Transparent Text Yes Yes Yes YesOverwrite Text Yes Yes Yes YesOutline Text Yes Yes Yes Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Paper Selection

    Auto SelectPaper SourcePaper Type

    Yes Yes Yes Yes

    Different Paper Cover Page No Yes Yes YesTransparency Inserts

    Blank / Printed Yes Yes Yes Yes

    Output Tray Center TrayRight TrayOffset TraySaddle Stitch Tray

    Yes Yes Yes Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Staple None

    1-Staple2-Staples

    Yes Yes Yes Yes

    Punch YesNo

    Yes Yes Yes Yes

    Binding Edge TopLeftRight

    No Yes No Yes

    No Offset On / Off Yes Yes Yes Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Copies *1 1-999 Yes Yes Yes YesCollate On / Off Yes Yes Yes Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Download Font Type *1 Yes Yes No NoPS Error Printing

    On / Off Yes Yes Yes Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Retention Hold Only

    Hold After PrintSample PrintPass Code

    No Yes No Yes

    Document Filing

    Quick FileMain FolderCustom Folder

    No No No Yes

  • MX-7000N SPECIFICATIONS 2 15

    i. Configuration

    *1: Can be used in MacOSX 10.3.

    F. Document filing function(1) Basic function

    (2) Data saving for each function

    G. Safety and environmental protection standards

    (1) Safety standards

    (2) Environmental Readiness International Energy Star Program MFP (EPA) The Eco Mark Program Environmental Choice Program (ECP) New Blue Angel Nordic Swan European ROHS regulations Chinese ROHS WEEE Taiwan green mark

    3. Ambient conditionsA. Environmental conditions for use of the main

    unitTemperature: 10qC to 35qC, Humidity: 20 to 85%RHAir pressure: 590 to 1013hPa (height: 0 to 2000m)

    User Authentication

    Login NamePassword

    No No No Yes

    Job ID User NameJob Name

    No No No Yes

    Tandem Print On / Off No No No Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3Auto Configuration No Yes No Yes

    *1

    Set Tandem Print

    IP Address (Slave Machine)

    No No No Yes

    Input Tray Options

    Four Trays Yes Yes No Yes

    Large Capacity Tray

    Large Capacity Tray (A3W/12x18)Large Capacity Tray (A4/8.5x11)

    Yes Yes No Yes

    Output Tray Options

    NoneFinisherSaddle Stitch Finisher

    Yes Yes No Yes

    Punch Module None / 2 Holes / 3 Holes / 4 Holes / 4 Holes(Wide)

    Yes Yes No Yes

    Right Tray On / Off Yes Yes No Yes

    Capacity for document filing

    Main folder Custom folder

    30GB

    Quick file folder

    10GB

    Pages or files for allowed for filing

    Main folderCustom folder

    4,200 pages or 3,000 files(SHARP standard document)

    Quick file folder

    1,400 pages or 1,000 files (SHARP standard document)

    Maximum number of user folder

    Maximum of 500 folders

    Number of users allowed for registration

    Depends on the number of user registrations. (Maximum of 1000 users)

    JobQuick File Folder Main/Custom Folder

    Shared storage

    Confidential storage

    Shared storage

    Confidential storage

    Copy Yes No Yes YesPrinter Yes Yes Yes

    Direct print (FTP) Yes No NoDirect print (e-mail) Yes Yes No

    Direct print (Web) Yes No NoScan to e-mail/FTP Yes Yes No

    Scan to SMB Yes Yes NoScan to USB

    memoryNo No No

    Fax reception No No NoFax transmission Yes Yes No

    Internet Faxreception

    No No No

    Internet Faxtransmission

    Yes Yes No

    PC-Fax/PC-InternetFax transmisson

    Yes Yes Yes

    Scan to HDD No Yes Yes

    FunctionWindows

    PPD

    Macintosh PPDMacOS9

    MacOSX 10.1

    MacOSX

    10.2/3

    100V type 200V typeSafety standard

    UL60950, 21CFR (Laser)CSA C22.2 No.60950CNS14336 (Taiwan)

    EN60950-1IEC60825 (Laser) GB4943 (China)

    EMC VCCI Class AFCC Class Part 15 Class AICES-003 Class A

    (Canada) CNS 13438 Class B

    (Taiwan)

    EN55022 Class ACISPR22 Class A

    (SABS: Class B)EN61000-3-2EN61000-3-3EN55024AS/NZS CISPR 22 Class A

    (Australia) GB9254, GB17625.1, GB/

    T17618 Class A (China)Line standard (for Fax expansion)

    FCC part 68 ICCS-03 PSTN01 (Taiwan)

    TS 103 021, EG 201 120, EG 201 121 (Europe)AS/ACIF S002 (Australia)GB/T 3382.1-2003, GB/T 3382.2-2003, YD/T 514-1998, YD/T 589-1996, YD/T 703-1993, YD/T 965-1998, YD/T 993-1998 (China)

    (Humidity)

    (Temperature)

    85%

    60%

    20%

  • MX-7000N SPECIFICATIONS 2 16

    B. Environmental conditions for transit of the main unit

    20qC to 45qC (No condensation)

    C. Standard environmental conditions for supplies

    Valid use period under the environmental conditions of use1) Photoconductor drum kit

    36 months from the production month2) Photoconductor drum unit

    24 months from the production month3) Toner (K)/Color toner (C/M/Y)

    24 months from the production month

    D. Environmental conditions for use of supplies

    E. Environmental conditions for transit of supplied

    20qC to 45qC (No condensation)F. Environmental conditions for store of supplies

    (sealed)10qC to 40qC (No condensation)

    (Humidity)

    90%

    60%

    20%

    (Temperature)

    (Humidity)

    (Temperature)

    85%

    60%

    20%

  • MX-7000N CONSUMABLE PARTS 3 1

    MX-7000N 5GTXKEG/CPWCN[3] CONSUMABLE PARTS

    1. Supply system tableA. USA/Canada/South and Central America

    *1: The toner life may vary depending on the document density and temperature and humidity.

    B. Europe/East Europe/Russia/Australia/New Zealand

    *1: The toner life may vary depending on the document density and temperature and humidity.

    C. Asia/Hong Kong

    *1: The toner life may vary depending on the document density and temperature and humidity.

    D. Middle East/Taiwan/Africa/Israel/Philippines

    *1: The toner life may vary depending on the document density and temperature and humidity.

    No. Item Content Life Model name Remarks1 Toner cartridge (Black) Toner cartridge (Black) with IC chip x 1 42K *1 MX-70NTBA Life: A4/Letter size at area

    coverage 5%2 Toner cartridge (Cyan) Toner cartridge (Cyan) with IC chip x 1 32K *1 MX-70NTCA Life: A4/Letter size at area

    coverage 5%3 Toner cartridge (Magenta) Toner cartridge (Magenta) with IC

    chipx 1 32K *1 MX-70NTMA Life: A4/Letter size at area

    coverage 5%4 Toner cartridge (Yellow) Toner cartridge (Yellow) with IC chip x 1 32K *1 MX-70NTYA Life: A4/Letter size at area

    coverage 5%5 Developer (Black) Developer (Black) x 1 300K MX-70NVBA6 Developer (Cyan/Magenta/Yellow) Developer (Cyan/Magenta/Yellow) x 1 100K MX-70NVSA7 Drum (Black) I80mm OPC drum x 1 300K MX-70NRBA8 Drum (Cyan/Magenta/Yellow) I30mm OPC drum x 1 100K (Color) MX-27NRSA

    No. Item Content Life Model name Remarks1 Toner cartridge (Black) Toner cartridge (Black) with IC chip x 1 42K *1 MX-70GTBA Life: A4/Letter size at area

    coverage 5%2 Toner cartridge (Cyan) Toner cartridge (Cyan) with IC chip x 1 32K *1 MX-70GTCA Life: A4/Letter size at area

    coverage 5%3 Toner cartridge (Magenta) Toner cartridge (Magenta) with IC

    chipx 1 32K *1 MX-70GTMA Life: A4/Letter size at area

    coverage 5%4 Toner cartridge (Yellow) Toner cartridge (Yellow) with IC chip x 1 32K *1 MX-70GTYA Life: A4/Letter size at area

    coverage 5%5 Developer (Black) Developer (Black) x 1 300K MX-70GVBA6 Developer (Cyan/Magenta/Yellow) Developer (Cyan/Magenta/Yellow) x 1 100K MX-70GVSA7 Drum (Black) I80mm OPC drum x 1 300K MX-70GRBA8 Drum (Cyan/Magenta/Yellow) I30mm OPC drum x 1 100K (Color) MX-27GRSA

    No. Item Content Life Model name Remarks1 Toner cartridge (Black) Toner cartridge (Black) with IC chip x 1 42K *1 MX-70ATBA Life: A4/Letter size at area

    coverage 5%2 Toner cartridge (Cyan) Toner cartridge (Cyan) with IC chip x 1 32K *1 MX-70ATCA Life: A4/Letter size at area

    coverage 5%3 Toner cartridge (Magenta) Toner cartridge (Magenta) with IC

    chipx 1 32K *1 MX-70ATMA Life: A4/Letter size at area

    coverage 5%4 Toner cartridge (Yellow) Toner cartridge (Yellow) with IC chip x 1 32K *1 MX-70ATYA Life: A4/Letter size at area

    coverage 5%5 Developer (Black) Developer (Black) x 1 300K MX-70AVBA6 Developer (Cyan/Magenta/Yellow) Developer (Cyan/Magenta/Yellow) x 1 100K MX-70AVSA7 Drum (Black) I80mm OPC drum x 1 300K MX-70ARBA8 Drum (Cyan/Magenta/Yellow) I30mm OPC drum x 1 100K (Color) MX-27ARSA

    No. Item Content Life Model name Remarks1 Toner cartridge (Black) Toner cartridge (Black) with IC chip x 1 42K *1 MX-70FTBA Life: A4/Letter size at area

    coverage 5%2 Toner cartridge (Cyan) Toner cartridge (Cyan) with IC chip x 1 32K *1 MX-70FTCA Life: A4/Letter size at area

    coverage 5%3 Toner cartridge (Magenta) Toner cartridge (Magenta) with IC

    chipx 1 32K *1 MX-70FTMA Life: A4/Letter size at area

    coverage 5%4 Toner cartridge (Yellow) Toner cartridge (Yellow) with IC chip x 1 32K *1 MX-70FTYA Life: A4/Letter size at area

    coverage 5%5 Developer (Black) Developer (Black) x 1 300K MX-70FVBA6 Developer (Cyan/Magenta/Yellow) Developer (Cyan/Magenta/Yellow) x 1 100K MX-70FVSA7 Drum (Black) I80mm OPC drum x 1 300K MX-70FRBA8 Drum (Cyan/Magenta/Yellow) I30mm OPC drum x 1 100K (Color) MX-27FRSA

  • MX-7000N CONSUMABLE PARTS 3 2

    E. China

    *1: The toner life may vary depending on the document density and temperature and humidity.

    2. Maintenance parts listA. U.S.A/Canada/South and Central America/Asia/Middle East/Agencies

    No. Item Content Life Model name Remarks1 Toner cartridge (Black) Toner cartridge (Black) with IC chip x 1 42K *1 MX-70CTBA Life: A4/Letter size at area

    coverage 5%2 Toner cartridge (Cyan) Toner cartridge (Cyan) with IC chip x 1 32K *1 MX-70CTCA Life: A4/Letter size at area

    coverage 5%3 Toner cartridge (Magenta) Toner cartridge (Magenta) with IC

    chipx 1 32K *1 MX-70CTMA Life: A4/Letter size at area

    coverage 5%4 Toner cartridge (Yellow) Toner cartridge (Yellow) with IC chip x 1 32K *1 MX-70CTYA Life: A4/Letter size at area

    coverage 5%5 Developer (Black) Developer (Black) x 1 300K MX-70CVBA6 Developer (Cyan/Magenta/Yellow) Developer (Cyan/Magenta/Yellow) x 1 100K MX-70CVSA7 Drum (Black) I80mm OPC drum x 1 300K MX-70CRBA8 Drum (Cyan/Magenta/Yellow) I30mm OPC drum x 1 100K (Color) MX-27CRSA

    No. Item Content Life Model name Remarks1 Heat roller kit Upper separation pawl x 6 300K MX-700HK

    Upper thermistor sub x 1Lower heat roller unit x 1Lower separation pawl x 4Separation pawl/spring x 4Upper thermistor x 1Lower thermistor x 1

    2 Upper heat rol