shale shock: how to invest in hydraulic fracturing special ...€¦ · shale shock: how to invest...

3
Shale Shock: How to Invest in Hydraulic Fracturing Special Report I love a good fight. When it comes to U.S. energy production, I can't think of a more controversial topic since Edwin Drake drilled his well on Pennsylvania soil over 150 years ago... It all revolves around hydraulic fracturing. Here's the part that most people don't seem to realize: Without fracking, the entire North American oil and gas industry would come to a screaming, painful halt. This is the reality we all need to face, regardless of protesters who abhor the fracturing process. Hydraulic Fracturing 101 Let's start from the beginning... Hydraulic fracturing is a simple process, really. It's used to create fractures in a rock formation by injecting the rock with a mixture of water, proppant (think: sand), and chemicals. Once opened, the fissures allow the oil and gas resources to flow more freely into the well, which can then be extracted through the well bore. Here's a video of this procedure in action. Although fracturing technology has roots that date back to the Civil War, the first case of hydraulic fracturing actually took place in 1947 when a company by the name of Stanolind Oil Company used it on a well in Kansas. In 1949, another company came along and began using their patented HydraFrac Process. You might have heard of the company before... It goes by the name of Halliburton. The controversy surrounding the technique and its impact on the environment didn't reach a feverish pitch until a few years ago. Why did it take over fifty years to come under fire? The answer to that question can be found within the wildly successful developments in our tight oil and gas plays... Something Old, Something New It's no secret that U.S. oil production peaked in 1970 — nor is it that we increasingly rely on unconventional sources for oil and gas. Even by using this projection from the EIA, we still won't come within 20% of our Peak Oil output of 10.44 million barrels per day in October of 1970. And we're seeing the exact same situation in our domestic natural gas production:

Upload: others

Post on 09-Aug-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Shale Shock: How to Invest in Hydraulic Fracturing Special ...€¦ · Shale Shock: How to Invest in Hydraulic Fracturing Special Report ... If you know where to look, ... The content

Shale Shock: How to Invest in Hydraulic Fracturing

Special ReportI love a good fight.

When it comes to U.S. energy production, I can't think of a more controversial topic since Edwin Drake drilled his well on Pennsylvania soil over 150 years ago...

It all revolves around  hydraulic fracturing.

Here's the part that most people don't seem to realize: Without fracking, the entire North American oil and gas industry would come to a screaming, painful halt. This is the reality we all need to face, regardless of protesters who abhor the fracturing process.

Hydraulic Fracturing 101

Let's start from the beginning...

Hydraulic fracturing is a simple process, really. It's used to create fractures in a rock formation by injecting the rock with a mixture of water, proppant (think: sand), and chemicals.

Once opened, the fissures allow the oil and gas resources to flow more freely into the well, which can then be extracted through the well bore.

Here's a video  of this procedure in action.

Although fracturing technology has roots that  date back to the Civil War,  the first case of hydraulic fracturing actually took place in 1947 when a company by the name of Stanolind Oil Company used it on a well in Kansas.

In 1949, another company came along and began using their patented HydraFrac Process. You might have heard of the company before... It goes by the name of Halliburton.

The controversy surrounding the technique and its impact on the environment didn't reach a feverish pitch until a few years ago.

Why did it take over fifty years to come under fire? The answer to that question can be found within the wildly successful developments in our tight oil and gas plays...

Something Old, Something New

It's no secret that U.S. oil production peaked in 1970  — nor is it that we increasingly rely on unconventional sources for oil and gas.

Even by using this projection from the EIA, we still won't come within 20% of our  Peak Oil output  of 10.44 million barrels per day in October of 1970.

And we're seeing the  exact same situation  in our domestic natural gas production:

Page 2: Shale Shock: How to Invest in Hydraulic Fracturing Special ...€¦ · Shale Shock: How to Invest in Hydraulic Fracturing Special Report ... If you know where to look, ... The content

Without taking advantage of hydraulic fracturing technology,  we can go ahead and eliminate all of the tight oil and gas production on those charts.

Of course, the situation gets worse when you look deeper into the United States' drilling stats: Right now, approximately 65% of all rigs operating on U.S. soil are drilling horizontal wells. And I can't emphasize enough that every single one of those wells need to receive some form of fracture stimulation.

Some industry insiders have suggested nearly 9 out of every 10 new wells will need to be fracked.

If you think the public is irate about $4/gallon gas prices (and I realize many readers have been and are paying much more than that now), imagine how they'll feel when they're being charged double, even triple, that amount.

Something Blue

Now let's dive into the gripes people have with hydraulic fracturing...

It all comes down to water. To be more specific, it all comes down to the  fluid that is flushed down the well during the process... millions of gallons of frac fluid.

Since the composition of this frac fluid is the issue, it's good to know 99.5% of it is water and sand.

And here we come to the point of no return for most anti-frackers: water contamination — that is, the threat of this frac fluid reaching someone's water source.

Note: No matter how many times they argue it,  there's never been a case of frac fluid migrating up to the water table.

Page 3: Shale Shock: How to Invest in Hydraulic Fracturing Special ...€¦ · Shale Shock: How to Invest in Hydraulic Fracturing Special Report ... If you know where to look, ... The content

In a typical well, the rock formation being fractured lies at a depth of more than 7,500 feet. Water aquifers are usually found at a depth of 1,000 feet. Between the two is a mass of solid rock.

Investing in Hydraulic Fracturing

Of course, there's a direct way to invest in hydraulic fracturing. As you know, companies like Halliburton have been around for a long time.

But I prefer the pick-and-shovel plays able to take advantage of the fact that we're locked into using this technology — with increasing dependence...

Believe it or not, there are companies out there whose sole objective is to mine sand and other materials to sell to companies that perform the frac jobs.

One company, CARBO Ceramics (NYSE: CRR), manufactures ceramic proppant to use in place of sand. And the results speak for themselves, as drillers are able to  increase production and EURs (the quantity oil and gas believed to be ultimately recoverable in a reserve or well) due to the uniformity of the ceramic proppants compared to sand.

If you know where to look, you will find other potential powerhouse stocks that will be making gains no matter how low oil or natural gas prices fall. 

These smaller plays are the real cash cows in the energy boom. Wall Street will be buying hand over fist once these relatively unknown stocks reach their radar.

You can view the HTML version here: Shale Shock: How to Invest in Hydraulic Fracturing

Energy and Capital , Copyright © Angel Publishing LLC . All rights reserved. The content of this site may not be redistributed without the express written consent of Angel Publishing. Individual editorials, articles and essays appearing on this site may be republished, but only with full attribution of both the author and Energy and Capital as well as a link to www.energyandcapital.com. Your privacy is important to us -- we will never rent or sell your e-mail or personal information. No statement or expression of opinion, or any other matter herein, directly or indirectly, is an offer or the solicitation of an offer to buy or sell the securities or financial instruments mentioned. While we believe the sources of information to be reliable, we in no way represent or guarantee the accuracy of the statements made herein. Energy and Capital does not provide individual investment counseling, act as an investment advisor, or individually advocate the purchase or sale of any security or investment. The publisher, editors and consultants of Angel Publishing may actively trade in the investments discussed in this publication. They may have substantial positions in the securities recommended and may increase or decrease such positions without notice. Neither the publisher nor the editors are registered investment advisors. Subscribers should not view this publication as offering personalized legal or investment counseling. Investments recommended in this publication should be made only after consulting with your investment advisor and only after reviewing the prospectus or financial statements of the company in question.