sgl salvo glad hand lock - castell safety · the salvo automatic door lock helps ensure loading...
TRANSCRIPT
Application
Description
Technical Data
Temperature Rating
Product Material
Dimensions
Weight
min -20° F / max 130° F
Brass and stainless steel
2.25” H x 10“ W x 2.25” D
4.5 lb
SGL Salvo Glad Hand Lock
The Salvo Glad Hand Lock can be attached to the emergency glad hand fitting of the truck trailer. Once attached, the trapped Castell key is released and can be inserted into the Salvo Manual Door Lock or Salvo Control Panel.
The Salvo Glad Hand Lock helps ensure loading dock safety. After the operator has unhooked the truck’s emergency brake, the Salvo Glad Hand Lock can be attached to the truck trailer, releasing the trapped Castell key. The truck is unable to depart until the key is replaced and the Salvo Glad Hand Lock is removed, allowing the brake lines to once again be engaged and operational.
110
mm
4.3”
166.5mm6.6”
18.4
mm
.7”
47 m
m1.
9”
58 m
m2.
3”
173.5 mm6.8”
255 mm10”
57 m
m2.
2”35
mm
1.4”
Order Information
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0012
1
Salvo Glad Hand Lock
P/N
510.0012
Description
The Salvo Club can be used in conjunction with other Salvo products to stop accidents before they happen. By attaching the Salvo Club to the vehicle’s steering wheel, it becomes locked in place and eliminates human error caused by unscheduled departure. The Salvo Club also prevents the vehicle against theft.
Application
Description
The Salvo Club helps ensure loading dock safety. The Salvo Club brings added safety to loading dock procedures by locking a vehicle’s steering wheel. The Salvo Club can be attached to vehicle steering wheels of varying sizes and will remain locked in place once the Castell key is removed. When loading/unloading procedures are complete, the Castell key may be replaced, and the Salvo Club can be removed allowing the vehicle driver to depart from the loading dock.
Technical Data
Product Material
Lock and Key Material
Min Steering Wheel Size
Max Steering Wheel Size
Steel/Cro-moly steel construction with heat treated solid steel hooks
Stainless steel ( FS - Lock )
9” Internal Diameter
19” Internal Diameter
CLUB Salvo Club
Order Information
Max Steering Wheel Diameter = 19” 482.6 mm
Min Steering Wheel Diameter = 9” 228.6 mm
Retracted Length = 22” 558.8 mm
Extended Length = 32” 812.8 mm
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0006
1
Salvo Club
P/N
510.0008
Description
The Salvo Control Panel is used as part of the Salvo Automatic Door system in conjunction with the SADL. It also easily connects to the Salvo Internal and External Traffic Lights or can be wired to an automatic door’s motor relay. Mounted on the outside of a building, the Salvo Control Panel traps the Castell key when an overhead door is open and the green communication light is displayed. When the overhead door is closed, the red communication light is displayed and the Castell key can be removed.
Application
Description
The SCP offers 1” diameter red and green communication lights designed to interlock with the door operator’s limit switches. The red communication light is displayed when the SADL is engaged. The green communication light is displayed when the SADL is disen-gaged, trapping the Castell key. When the SADL is reengaged, the red communication light is displayed and the yellow LED can then be pressed, which releases the Castell key.
Technical Data
Temperature Rating
Dimensions
Weight
Voltage
Color
Material
Rating
min -22° F / max 130° F
12” H x 8” W x 6” D
18 lb
110V AC
RAL 7035 (Light Grey)
Powder Coated Mild Steel
IP65, NEMA 4 Enclosure
SCP Salvo Control Panel
Order Information
200 mm7.875”
300
mm
11.7
5”
155 mm6.125”
160 mm6.25”
o 8 mm
o .375”
260
mm
10.2
5”
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0010
1
Salvo Control Panel
P/N
510.0033
Description
The Salvo Automatic Door Lock helps ensure loading dock safety. Mounted inside the building on the overhead door or Salvo Bollard, the Salvo Automatic Door Lock is linked to a Salvo Control Panel. When the door lock is disengaged the Castell key is trapped in the Salvo Control Panel. When the door lock is engaged, the key is released.
Application
Description
The Salvo Automatic Door Lock works in conjunction with the Salvo Control Panel to help ensure loading dock safety. The locking mechanism is a heavy duty stainless steel tongue.
Technical Data
SADL Salvo Automatic Door Lock
4 OFF M8x12mm HOLES(ACCESS FROM REAR)4 OFF O 5.5 HOLES(ACCESS FROM FRONT)
65 mm2.561”
7.5 mm
.2955”
115
mm
4.53
1”
M5 M8
7.5
mm
.295
5”
80 mm.152”
60 mm
6.74
”17
1.1
mm
130
mm
2.362”
5.11
8”
TAMPERPROOFSCREWS
2 OFF LEDSRIGHT - YELLOW (GUARD UNLOCKED)LEFT - RED (GUARD OPEN)
SOLENOIDOVERRIDE
FRONT BACK
1While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Terminal Blocks
SADL Salvo Automatic Door Lock
Material
Finishing
Color
Ingress Protection
Operating Force
Retention Force Locked
Maximum Approach Speed
Minimum Door Radius
Mechanical Life
Maximum Frequency of Ops
Ambient Temperature
Maximum Wire
Cross-Section to Fit Connector
Connector Type
Switch Conformance
Switching Contact Element
Switching Principal
Switch Control
Switching Voltage
Isolating Distance
Contact material
Utilization Category
Control Voltage
Insulating Resistance
Insulating Voltage
Solenoid Power Rating
Solenoid Rating (Duty Cycle)
Solenoid Voltage
Solenoid Voltage Tolerance
Zinc alloy, stainless steel
Gloss polyester powder coat on
passivated base material
Red, black, and stainless steel
IP67 (DIN400050)
0.5N
2,500 N
20 m/minutes
900 mm
>1,000,000 switching cycles
7,200 hour/hour
-5 ~ 40°C (mean over 24 hrs = +35°C)
2.50 mm²
Spring activated vibration proof block
DIN VDE 0660 Part 206 & IEC
Positive Break
3A
230V AC Max
2x2 mm per switch element
90% silver and 10% nickel
AC 15 or DC 13
24V AC/DC
20 M 0 hm
2.500V AC
12W (solenoid current at nominal
4NC and 2NO
500 mA; quasient current = 350mA)
100%
24V DC
90% to 110% of nominal
SADL Automatic Door Lock Specifications
Order Information
Terminals
Terminal 1
Terminal 2
Terminal 3
Terminal 4
Terminal 5
Terminal 6
Terminal 7
Terminal 12
Terminal 13
Terminal 14
ØV/N
Output 1
Solenoid power
Solenoid power
Output 2
+V/L
Output 2
Tongue Position Feedback
Solenoid Feedback
Output 1
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0007
2
Salvo Automatic Door Lock
P/N
510.0037
Description
4 OFF M8x12mm HOLES(ACCESS FROM REAR)4 OFF O 5.5 HOLES(ACCESS FROM FRONT)
65 mm2.561”
7.5 mm.2955”
115
mm
4.53
1”
M5 M8
7.5
mm
.295
5”
When the tongue is engaged, the safety key is trapped. The integral solenoid prevents the safety key from being removed until the solenoid is energized. On the SADL-A modules, a yellow LED will illuminate when the solenoid has been energized and the key can be removed. When the Safety Key is removed, a green LED will illuminate on the interlock indicating that there is a safe state. The forklift operator can then take the Safety Key into the trailer, preventing an inadvertent release of the trailer. The Safety Key cannot be replaced until the tongue is engaged in the interlock.
Operation
Description
Salvo SADL-A has a heavy duty tongue and head that allow it to withstand the rigors of a loading dock. The tongue and head unit can rotate in 90 degree increments. It has a key operated auxiliary release in the event of a power failure. The product is ideally designed for loading docks where an additional level of safety is preferred.
Safety Key Adaptor ensures that the forklift driver cannot be on a truck trailer and have the chain or door closed behind them.
SADL-A Salvo Automatic Door Lock with Key Adapter
Technical Data
80 mm.152”
60 mm
6.74
”17
1.1
mm
130
mm
2.362”
5.11
8”
TAMPERPROOFSCREWS
2 OFF LEDSRIGHT - YELLOW (GUARD UNLOCKED)LEFT - RED (GUARD OPEN)
SOLENOIDOVERRIDE
FRONTBACK
1While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
231.
1 m
m9.
098”
SADL-A Salvo Automatic Door Lock with Key Adapter
Material
Finishing
Color
Ingress Protection
Operating Force
Retention Force Locked
Maximum Approach Speed
Minimum Door Radius
Mechanical Life
Maximum Frequency of Ops
Ambient Temperature
Maximum Wire
Cross-Section to Fit Connector
Connector Type
Switch Conformance
Switching Contact Element
Switching Principal
Switch Control
Switching Voltage
Isolating Distance
Contact material
Utilization Category
Control Voltage
Insulating Resistance
Insulating Voltage
Solenoid Power Rating
Solenoid Rating (Duty Cycle)
Solenoid Voltage
Solenoid Voltage Tolerance
Zinc alloy, stainless steel
Gloss polyester powder coat onpassivated base material
Red, black, and stainless steel
IP67 (DIN400050)
0.5N
2,500 N
20 m/minutes
900 mm
>1,000,000 switching cycles
7,200 hour/hour
-5 ~ 40°C (mean over 24 hrs = +35°C)
2.50 mm²
Spring activated vibration proof block
DIN VDE 0660 Part 206 & IEC
Positive Break
3A
230V AC Max
2x2 mm per switch element
90% silver and 10% nickel
AC 15 or DC 13
24V AC/DC
20 M 0 hm
2.500V AC
12W (solenoid current at nominal
4NC and 2NO
500 mA; quasient current = 350mA)
100%
24V DC
90% to 110% of nominal
SADL-A Automatic Door Lock Specifications
Terminals
Terminal 1
Terminal 2
Terminal 3
Terminal 4
Terminal 5
Terminal 6
Terminal 7
Terminal 12
Terminal 13
Terminal 14
ØV/N
Output 1
Solenoid power
Solenoid power
Output 2
+V/L
Output 2
Tongue Position Feedback
Solenoid Feedback
Output 1
Order Information
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0008
2
Salvo Automatic Door Lock with Adaptor
P/N
510.0037
Description
Terminal Blocks
The Salvo Manual Door Lock helps ensure loading dock safety. Mounted on an overhead door or Salvo Bollard inside the building, the Salvo Manual Door Lock can work in conjunction with the Salvo Barrier Chain to prevent unscheduled departures. When the Castell key is inserted into the Salvo Manual Door Lock, the bolt can be removed and the door opened. When the door is closed, the bolt is replaced and the key is released.
Application
Description
The standard bolt of the Salvo Manual Door Lock is stainless steel and is mounted on the left-hand side of the door. For increased flexibility, the Salvo Manual Door Lock can be equipped with a chain-mounted bolt in order to be used with a Salvo Barrier Chain.
Technical Data
Temperature Rating
Product Material
Lock Dimensions
Bolt Dimensions
Weight
min -40° F / max 280° F
Stainless steel
2.75” H x 3.5” W x 2.5” D
13” long, 5” wide
2.42 lb
SMDL-SDMC Salvo Door Manual Chain
Order Information
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0016
1
SMDL - R Salvo Manual Door Lock Right Hand with Chain
SMDL - L Salvo Manual Door Lock Left Hand with Chain
P/N
510.0042
510.0034
Description
The Salvo Manual Door Lock helps ensure loading dock safety. Mounted on an overhead door or Salvo Bollard inside the building, the Salvo Manual Door Lock can work in conjunction with the Salvo Barrier Chain to prevent unscheduled departures. When the Castell key is inserted into the Salvo Manual Door Lock, the bolt can be removed and the door opened. When the door is closed, the bolt is replaced and the key is released.
Application
Description
The standard bolt of the Salvo Door Manual Bolt is stainless steel and is mounted on the left-hand side of the door.
Technical Data
Temperature Rating
Product Material
Lock Dimensions
Bolt Dimensions
Weight
min -40° F / max 280° F
Stainless steel
2.75” H x 3.5” W x 2.5” D
13” long, 5” wide
2.42 lb
SMDL-SDMB Salvo Door Manual Bolt
Order Information
Salvo Manual Door Lock with Bolt
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0015
P/N
510.0041
Description
1
The Salvo Manual Door Lock with Electric Interlock helps ensure loading dock safety. Mounted on an overhead door or Salvo Bollard inside the building, the SMDL-EI can be electrically interlocked with another piece of dock equipment.
Application
Description
The standard bolt of the Salvo Manual Door Lock with Electric Interlock is stainless steel and is mounted on the left-hand side of the door. For increased flexibiltiy, the SMDL-EI can be equipped with a chain-mounted bolt in order to be used with a Salvo Barrier Chain.
Technical Data
Temperature Rating
Product Material
Lock Dimensions
Bolt Dimensions
Weight
Current/Voltage
Mechanical Life Cycle
Switch Contact
min -20° F / max 175° F
Aluminum and stainless steel
2.75” H x 3.5” W x 2.5” D
13” long, 5” wide
2.5 lb
10A / max 500V
200,000 electrical operations
SMDL-EI SMDL - Electric Interlock
2 x N.O. (Normally Open)1 x N.C. (Normally Closed)
Order Information
SMDL - Electric Interlock Right / Hand-2
SMDL - Electric Interlock Left / Hand-1
P/N
510.0044
510.0036
Description
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0017
1
SMDL - EI - RP/N 510.0036
www.castell.com1.877.341.3075
Application
Description
The Salvo Adjustable Manual Lock Bracket (SAMLB) helps ensure loading dock safety by working in conjuction with other Salvo products. The SAMLB is easy to install by bolting it to the wall. Its adjustable feature makes it simple to align at the loading dock. Various products mount to the SAMLB to stop accidents before they happen.
SAMLB Salvo Adjustable Manual Lock Bracket
SBCSalvo Barrier Chain Kit
SMDL-EISalvo Manual Door with Electrical Interlock
SMDLSalvo Manual Door Lock
Order Information
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0020
1
Salvo Adjustable Manual Lock Bracket
P/N
510.0018
Description
Technical Data
Product Material
Color
Dimensions
Weight
Mild Steel
OSHA Safety Yellow
8.386” H x 3.15” W x 3.5” - 5” D (adjustable)
4.5 lb
213.
00 m
m8.
386”
3.5”88.9 m
m5”127 mm
(adjustable)
-
9.00 mm.354”
80.00 mm3.15”
40.00 mm1.575”
9.00 mm.354”
28.50 mm1.122”
195.
25 m
m7.
687”
69.5
0 m
m2.
736”
21.0
0 m
m.8
27”
74.0
0 m
m2.
913”
21.0
0 m
m.8
27”
6.60 HOLES USED FORMOUNTING SMDL-EI,SMDL ANDCHAIN PLATES
R4.50 mm TYP.
.177”
MOUNTING DETAILS
BOLLARD
Applications
Description
The Salvo Bollard has many applications that help ensure loading dock safety. The Salvo Bollard can be equipped with several different Salvo products to stop accidents before they happen. It can be mounted on exisiting or newly poured concrete by attaching the post to a mounting bracket on the ground.
SMDLSalvo Bollard with Manual Door
Lock
Manual door lock mounts to bollard
and works in conjunction with Salvo
Bollard with Chain.
SBCSalvo Bollard with Barrier Chain
Bracket and chain can be mounted
to bollard and connect to bollard-
mounted manual or automatic door
lock (as shown above).
SGLESalvo Bollard with Storage Box
Designed to store Salvo Glad Hand
Lock (SGL) when not in use on a
truck trailer.
SMDL model shown
Salvo Bollard
SADLSalvo Bollard with Automatic Door
Lock
Automatic door lock mounts to
bollard and works in conjunction with
Salvo Bollard with Chain and
connects to the Salvo Automatic Door
Lock (SADL).
SMDL - EISalvo Bollard with SMDL - EI Lock
SMDL - EI manual lock with electrical
contacts mounts to bollard and
interlocks with a dock leveler or
controls Salvo Internal Traffic Lights
(SITL).
1While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
BOLLARD
Technical Data
Post Material
Cap Material
Dimensions
Weight
Color
Powder-coated carbon steel
UV-resistant ABS plastic (black)
40.5” x 4.25” x 6.25”
35 lb
Safety Yellow
L-anchor, expansion anchor, split washer and nut, SADL mounting plate, SMDL/Chain Plate mount (included)
SCP & SGLESalvo Bollard with Control Panel and
Storage Box
Control panel (SCP) mounts on top of
the bollard in conjunction with
Storage Box (SGLE) mounted to the
side.
Salvo Bollard
Applications (Cont’d)
Mounting Hardware
SCPSalvo Bollard with Control Panel
Designed to mount Salvo Control
Panel (SCP), which interlocks with the
door operator’s limit controls or
controls the Salvo Internal Traffic
Lights (SITL).
152.4 mm
1022
.35
mm
40.2
5”
6”
114.3 mm
4.5”
Order Information
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0005
2
Salvo Bollard
P/N
510.0000
Description
12”
The Salvo Wall Bracket has pre-positioned holes making it easy to hold any of the mountable Salvo products. The Salvo Wall Bracket is ideally mounted between dock doors to create space for the easy operation of Salvo products.
Application
Description
The Salvo Wall Bracket attaches to the wall and makes it easy to mount various Salvo products as part of a loading dock safety system.
Technical Data
Product Material
Color
Dimensions
Weight
Carbon steel
OSHA Safety Yellow
10.25” H x 12” W x 4.5” D
9 lb
SWB Salvo Wall Bracket
SADL SMDL w/ ChainSCCP
Order Information
65.024 mm
39.88 mm
18.7
96 m
m
24.64 mm
37.34 mm
39.6
24 m
m73
.914
mm
17.53 mm79.502 mm
115.
062
mm
152.
4 m
m
3”
4 x .56” THRU
Scale 2:1
Bot
tom
12”
.75”
4.5”
6”3”
Bot
tom
Top
10”
.19”
.19”
6” Top
1.55
”2.
91”
2 X
O 1
” TH
RU
.69”3.13”
6” 4.53
”.7
4”
2.56”
1.57” 1.47”
4 X
O .3
1” T
HR
U4
X O
.41”
TH
RU
304.
8 m
m
19.05 mm
114.3 mm
76.2
mm
76.2 mm
152.
4 m
m
14.22 mm
152.
4 m
m
254 mm
4.83 mm
4.83 mm
304.
8 m
m
25.4
mm
2.44
mm
10.4
1 m
m
.97”
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0019
1
Salvo Wall Bracket
P/N
510.0001
Description
Part of the Salvo product line, the Salvo Barrier Chain can be used when door-mounted locks are not suitable. Used in conjunction with several Salvo products, the Salvo Barrier Chain is put in place to prevent a forklift driver from leaving the dock when there is no truck at the dock. The Salvo Barrier Chain is ideal for applications where dock doors are left open.
Application
Description
The Salvo Barrier Chain can be used in conjunction with a Salvo Automatic or Manual Door Lock to help ensure loading dock safety. The SBC consists of three components: the barrier chain plate, the chain link, and the barrier chain. The barrier chain can be cut to length and quickly attached to the barrier chain plate without welding using the one-time close chain link. The Salvo Barrier Chain can be floor-mounted, wall-mounted, or mounted on a Salvo Bollard.
Technical Data
Type of Mounting
Plate Material
Chain Material
Chain Link
Four M6 security bolts
Stainless Steel
Steel, Powder Coated in OSHA Safety Yellow
Steel, One time closure
SBC Salvo Barrier Chain
9 mm
7 m
m
9 mm 4 mm
92 m
m3.
620”
57.912 mm2.280”
6.75mm
Order Information
2.01 mm
25.654 mm
29.97 mm
4.98 mm
29.9
7 m
m
1.575”.353”
.354”4 x o .266 THRU ALL
2.91
3”
1.180”.079”
o .196”
1.010”SECTION A-A
1.18
0”
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0009
1
Salvo Barrier Chain
P/N
510.0006
Description
The Salvo Traffic Lights can be used in conjunction with the Salvo Traffic Light Sign to improve communication between a dock attendant and truck drivers. Mounted outside in close proximity to the Salvo Traffic Light Sign, the Salvo Traffic Lights are linked to a Salvo Control Panel. The red light indicates that the truck is still being loaded, and the green light inform the driver when it is safe to depart from the loading dock.
Application
Description
The Salvo Traffic Lights are used where larger red and green lights than those on the Salvo Control Panel are required to warn drivers not to pull away until the green light is on. The lights are ideally located in a highly visible location close to the Salvo Traffic Light Sign.
Technical Data
Product Material
Dimensions
Len Diameter
Weight
Voltage
Color
Polypropylene
5” H x 6 3/8” W x 4” D
10 1/4”
2 lb
115V AC
OSHA Safety Yellow
STL Salvo Traffic Lights
Wire Configuration
Black (Green)
White
Black (Red)
Red
Green Lamp
Ground/Earth
Red Lamp
Common/Neutral
Order Information
RED
GREEN
BLACK
BLACK
RED
WHITE
STL Unit
163 mm6.422”
143 mm5.634”
267
mm
10.5
2”
291
mm
11.4
7”
O 6 mm
.25”
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0011
1
Salvo Traffic Lights
P/N
510.0031
Description
The Salvo Traffic Light Sign can be used in conjunction with the Salvo External Traffic Light to improve communication and help ensure loading dock safety. Mounted outside in close proximity to the Salvo External Traffic Light, the Salvo Traffic Light Sign informs the driver when it is safe to depart from the loading dock.
Application
Description
The Salvo Traffic Light Sign warns drivers not to pull away until the the green light is on. The sign is ideally located in a highly visible location close to the Salve External Traffic Light. The Salvo Traffic Light Sign contains reflected lettering that makes it easy to read from a truck’s rear view mirrors.
Technical Data
Product Material
Dimensions
Weight
Color
Laminated
10” W x 2’ 4” H x 1/4” D
2 lb
OSHA Safety Yellow
STLS Salvo Traffic Light Sign
Order Information
6 mm
710
mm
2’ 4
”
6 FIXING HOLES O 5.51/4”
96 m
m3.
75”
294.
50 m
m11
.625
”
204 mm8.063”
25 mm1”
294.
50 m
m11
.625
”
254 mm10”
254 mm10”10”10
O 5.5
96 m
m3
75”
294.
50 m
m11
625”
204 mm8.063”
mm1”
294.
50 m
m11
625”
.25”
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0018
1
Salvo Traffic Light Sign
P/N
510.0032
Description
Part of the Salvo product line, the Salvo Glad Hand Lock Enclosure - Exterior stores a Salvo Glad Hand Lock. Mounted to the wall or a Salvo Bollard outside, the Salvo Glad Hand Lock Enclosure stores and protects a Salvo Glad Hand Lock when it is not being used on a truck’s airline.
Application
Description
The Salvo Glad Hand Lock Enclosure - Exterior is designed to store a single Salvo Glad Hand Lock when not in use. The Salvo Glad Hand Lock Enclosure can be quickly wall-mounted or attached to a Salvo Bollard. The enclosure is weather-resistant, protecting the Salvo Glad hand Lock even in a harsh environment.
Technical Data
Temperature Rating
Product Material
Dimensions
Weight
Closing Handle
min -20° F / max 175° F
Stainless Steel
12” H x 8” W x 6” D
6 lb
Handle with Key Lock
SGLE-E SGL Enclosure - Exterior
Mounting HolePattern
Order Information
200 mm
7.88”
161 mm
6.34”
131 mm5.16”
299.
97 m
m11
.81”
160.15 mm6.31”
40.01 mm1.58”
73.9
9 m
m2.
91”
259.
97 m
m10
.24”
7 mm
1/4”o
SGL Enclosure - Exterior
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0013
P/N
510.0004
Description
1
Part of the Salvo product line, the Salvo Glad Hand Lock Enclosure - Interior stores up to six Salvo Glad Hand Locks. Mounted to the wall inside, the Salvo Glad Hand Lock Enclosure stores Salvo Glad Hand Locks when they are not being used on a truck’s airlines.
Application
Description
The Salvo Glad Hand Lock Enclosure - Interior is deigned to store six Salvo Glad Hand Locks when not in use. The Salvo Glad Hand Lock Enclosure is wall-mounted. The enclosure is modular and can be combined with other enclosures to store more than six Salvo Glad Hand Locks.
Technical Data
Product Material
Color
Dimensions
Weight
Cold rolled steel
Powder Coat OSHA Safety Yellow
12” H x 20” W x 1” D
7 lb
SGLE-I SGL Enclosure - Interior
25.4 mm
30.23 mm
304.8 mm
19.05 mm 266.7 mm
501.
65 m
m
469.
9 m
m
16.002 mm 9.652 mmOrder Information
304.8 mm
19.05 mm 266.7 mm
501.
65 m
m
469.
9 m
m
.002 mm 9.652 mm
12.00”
10.50”.75”18
.50”
19.7
5”
.63” 4x o .38” THRU
1”
1.19” TYP.
SGL Enclosure - Interior
While every effort has been made to ensure the accuracy of the information provided, no liability can be taken for any errors or omission. Castell Safety International Limited reserves the right to alter specifications and introduce improvements without prior notice.
Contact InformationCastell Interlocks, Inc.
21 Kenton Lands Road
Erlanger, KY 41018
phone: +1.859.341.3075
fax: +1.859.957.1577
toll free: +1.877.341.3075
www.castell.com 580.0014
P/N
510.0005
Description
1