SFH 206 K

1 Version 1.4 | 2020-01-07

Produktdatenblatt | Version 1.1 www.osram-os.com

Applications

SFH 206 K

Radial Sidelooker Silicon PIN Photodiode

— Electronic Equipment

— Industrial Automation (Machine Controls, Light Barriers, Vision Controls)

— White Goods

Features: — Package: clear epoxy

— Qualifications: The product qualification test plan is based on the guidelines of AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors. — ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

— Especially suitable for applications from 400 nm to 1100 nm — Short switching time (typ. 20 ns) — 5 mm LED plastic package — Also available on tape and reel

Ordering Information

Type Photocurrent 1) Photocurrent Ordering Codetyp.

Ev = 1000 lx; Std. Light A; VR = 5 V Ev = 1000 lx; Std. Light A; VR = 5 VIP IP

SFH 206 K ≥ 55 µA 80 µA Q62702P0129

SFH 206 K

2 Version 1.4 | 2020-01-07

Maximum RatingsTA = 25 °C

Parameter Symbol Values

Operating Temperature Top min. max.

-40 °C100 °C

Storage temperature Tstg min. max.

-40 °C100 °C

Reverse voltage VR max. 32 V

Total power dissipation Ptot max. 150 mW

ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)

VESD max. 2 kV

SFH 206 K

3 Version 1.4 | 2020-01-07

CharacteristicsTA = 25 °C

Parameter Symbol Values

Spectral sensitivity VR = 5 V; Std. Light A; T = 2856 K

S min. typ.

50 nA/lx80 nA/lx

Wavelength of max sensitivity λS max typ. 920 nm

Spectral range of sensitivity λ10% typ. 420 ... 1120 nm

Radiant sensitive area A typ. 7.02 mm²

Dimensions of active chip area L x W typ. 2.65 x 2.65 mm x mm

Half angle φ typ. 60 °

Dark current VR = 10 V

IR typ. max.

2 nA30 nA

Spectral sensitivity of the chip λ = 850 nm

Sλ typ. 0.62 A / W

Quantum yield of the chip λ = 850 nm

η typ. 0.90 Electrons / Photon

Open-circuit voltage Ev = 1000 lx; Std. Light A; VR = 0 V

VO min. typ.

310 mV365 mV

Short-circuit current Ev = 1000 lx; Std. Light A; VR = 0 V

ISC typ. 80 µA

Rise time VR = 5 V; RL = 50 Ω; λ = 850 nm; IP = 800 µA

tr typ. 0.02 µs

Fall time VR = 5 V; RL = 50 Ω; λ = 850 nm; IP = 800 µA

tf typ. 0.02 µs

Forward voltage IF = 100 mA; E = 0

VF typ. 1.3 V

Capacitance VR = 0 V; f = 1 MHz; E = 0

C0 typ. 72 pF

Temperature coefficient of voltage TCV typ. -2.6 mV / K

Temperature coefficient of short-circuit current Std. Light A

TCI typ. 0.18 % / K

Noise equivalent power VR = 10 V; λ = 850 nm

NEP typ. 0.041 pW / Hz1/2

Detection limit VR = 10 V; λ = 850 nm

D* typ. 6.5e12 cm x Hz1/2 / W

SFH 206 K

4 Version 1.4 | 2020-01-07

Relative Spectral Sensitivity 2), 3)

Srel = f (λ)

400 600 800 1000λ [ ]

0

20

40

60

80

100[ ]

Directional Characteristics 2), 3)

Srel = f (φ)

OHF01402

90

80

70

60

50

40 30 20 10

20 40 60 80 100 1200.40.60.81.0

ϕ

0.2

0.4

0.6

0.8

1.0

1000

0

0

SFH 206 K

5 Version 1.4 | 2020-01-07

Photocurrent/Open-Circuit Voltage 2), 3)

IP (VR = 5 V) / VO = f (Ev)Dark Current 2), 3)

IR = f (VR); E = 0

Capacitance 2), 3)

C = f (VR); f = 1MHz; E = 0; TA = 25°C

SFH 206 K

6 Version 1.4 | 2020-01-07

Dark Current 2)

IR = f (TA); E = 0; VR = 10 V

Power ConsumptionPtot = f (TA)

T

OHF00394

A

0

totP

020 40 60 80 ˚C 100

mW

20

40

60

80

100

120

140

160

SFH 206 K

7 Version 1.4 | 2020-01-07

Dimensional Drawing 4)

6.9 (0.272)

6.3 (0.248)0.8 (0.031)

4.0 (0.157)

34 (1.339)32 (1.260)

1.8 (0.071)1.2 (0.047)

0.8

(0.0

31)

0.4

(0.0

16)

2.54

(0.1

00)

spac

ing

0.6 (0.024) x 0.5 (0.020)0.4 (0.016) x 0.3 (0.012)

4.1 (0.161)3.7 (0.146)

5.1

(0.2

01)

4.7

(0.1

85)

Cathode

Area not flat Radiant sensitive area

GEOY6647

Further Information:

Approximate Weight: 276.0 mg

Package marking: Cathode

SFH 206 K

8 Version 1.4 | 2020-01-07

Recommended Solder Pad 4)

Pad 1: anode

SFH 206 K

9 Version 1.4 | 2020-01-07

TTW SolderingIEC-61760-1 TTW

00

s

OHA04645

50

100

150

200

250

300

t

T

˚C

235 ˚C - 260 ˚CFirst wave

20 40 60 80 100 120 140 160 180 200 220 240

Second wave

10 s max., max. contact time 5 s per wave

Preheating

T∆

100 ˚C120 ˚C130 ˚C

Typical

Cooling

ca. 3.5 K/s typical

ca. 2 K/s

ca. 5 K/s

Continuous line: typical processDotted line: process limits

< 150 K

SFH 206 K

10 Version 1.4 | 2020-01-07

NotesThe evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. When looking at bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-tion, annoyance, visual impairment, and even accidents, depending on the situation.

Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. There-fore, we recommend that customers minimize device exposure to aggressive substances during storage, production, and use. Devices that showed visible discoloration when tested using the described tests above did show no performance deviations within failure limits during the stated test duration. Respective failure limits are described in the IEC60810.

For further application related information please visit www.osram-os.com/appnotes

SFH 206 K

11 Version 1.4 | 2020-01-07

Disclaimer

Attention please!The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances.For information on the types in question please contact our Sales Organization.If printed or downloaded, please find the latest version on the OSRAM OS website.

PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.

Product and functional safety devices/applications or medical devices/applicationsOSRAM OS components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices.OSRAM OS products are not qualified at module and system level for such application.

In case buyer – or customer supplied by buyer – considers using OSRAM OS components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales partner of OSRAM OS immediately and OSRAM OS and buyer and /or customer will analyze and coordi-nate the customer-specific request between OSRAM OS and buyer and/or customer.

SFH 206 K

12 Version 1.4 | 2020-01-07

Glossary1) Photocurrent: The photocurrent values are measured (by irradiating the devices with a homogenous

light source and applying a voltage to the device) with a tolerance of ±11 %.2) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-

es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could dif-fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.

3) Testing temperature: TA = 25°C (unless otherwise specified)4) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and

dimensions are specified in mm.

SFH 206 K

13 Version 1.4 | 2020-01-07

Revision HistoryVersion Date Change

1.4 2020-01-07 Electro - Optical Characteristics (Diagrams)

SFH 206 K

14 Version 1.4 | 2020-01-07

Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.