setting up writelog networking for contests at pj2t

26
Setting up Writelog Networking for Contests at PJ2T Version 1.0 19 July 2011 W0CG

Upload: rock

Post on 31-Jan-2016

20 views

Category:

Documents


0 download

DESCRIPTION

Setting up Writelog Networking for Contests at PJ2T. Version 1.0 19 July 2011 W0CG. Writelog at PJ2T Conceptual Overview. The Station # 1 computer is the main computer for the logging network. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: Setting up Writelog Networking for Contests at PJ2T

Setting up Writelog Networking for Contests at PJ2T

Version 1.019 July 2011

W0CG

Page 2: Setting up Writelog Networking for Contests at PJ2T

Writelog at PJ2T

Conceptual Overview

• The Station # 1 computer is the main computer for the logging network. • We first build a log for a contest at Station # 1 so that it contains exactly all the

windows and functions and parameters we need. (Example log follows.)• Next, we go to Station 2 and copy an exact copy of that log from Station 1 to Station 2

(procedure follows), then save that log on the Station 2 local C:\ drive.• Same thing for Stations 3 and 4. This assures that all four computers have exactly

identical Writelog log setups.• Then we use Writelog networking (procedure follows) to link the Station 2 computer to

Station 1, which is the master log. • Next, we link Station 3 to Station 1, and finally link Station 4 to Station 1.• For Multi/2, we use the Radio dropdown menu to designate Station 1 as Radio (A)

and Station 2 as Radio (B).• Finally, one of the computers (usually Station 3) is linked via Telnet to a cluster node,

normally K3LR, and the other three computers are linked to Station 3 via the Writelog local network (procedure follows) in order to get the spot data to all computers.

Page 3: Setting up Writelog Networking for Contests at PJ2T

PJ2T Writelog Network Layout

Station 1PC

Station 2PC

Station 3PC

Station 4PC

Writelog Master Computer

Writelog networking link

Writelog networking link

Writelog networking link

K3LR, W8WTS,or other PacketClusternode

Writelog Telnet link

Internet

• This is what the PJ2T Writelog network looks like at the completion of the configuration process.

• The rest of these slides explain how to set this up.

Page 4: Setting up Writelog Networking for Contests at PJ2T

Procedure Step 1: Create Master Log on Station 1 PC

• Learn Writelog. (This guide assumes that you know generally how to manipulate Writelog.)• Create a new, empty log for your contest on the Station 1 PC. Writelog Start a new log• Be sure that all the needed windows are there, and arrange them for best functionality and best

use of screen space.• Be sure that:

– You selected the correct contest,– You have Summary, Packet Spots, Networked Frequencies, Rates (if desired), Band

Changes (if needed), QSO Entry Window, Check Call, Super Check Partial, Network Gab, and Sked (if needed) windows,

– You have correctly configured Setup, Ports (next page) and Setup, Super Check Partial (two pages after this),

– If it is the WPX contest, which requires separate serial numbers for each band, be sure to do Setup, Sort order and serial numbers (third page after this)

– You have done Setup, Save Configuration (fourth page after this), and entered the correct name and address.

• Save the log on the Station 1 PC in C:\Writelog\Contests with a name like arrl.dx.cw.2011.• Get everyone on your team to look at this log on Station 1 and be SURE it is exactly like they

want. Adjust font sizes, layout, window selection until everyone is happy, because this is the master for all the other computers.

• Save again (File, Save) after all changes are finalized.

Page 5: Setting up Writelog Networking for Contests at PJ2T

Master Log Example• Here’s an example of what the Station 1 master log might look like except that it will, of course, be initially void of

QSOs.

Page 6: Setting up Writelog Networking for Contests at PJ2T

Setup, Ports• Setup, Ports window usually looks like this for the new Dell PCs• See the label on the PC, but normally the rig is on COM3 and CW is on COM4. • FT-2000 requires baud rate of 4800. Other radios are OK with “default.”• For phone contests, don’t use the Writelog DVK because we use the FT-2000 built in voice keyers or outboard MFJ voice

keyers.

Page 7: Setting up Writelog Networking for Contests at PJ2T

Setup, Super Check Partial

• Setup, Super Check Partial should look like this.

• The Dta files are stored in C:\Writelog\Programs\.

• Use MASTER.DTA or whichever of the other three .DTA files is correct for your contest.

• (Be sure you have downloaded the latest versions of these files from www.supercheckpartial.com. Sometimes these are updated only a day or so before the contest.)

Page 8: Setting up Writelog Networking for Contests at PJ2T

Setup, Sort order & serial numbers

• The WPX contest requires separate serial numbers for each band.

• Use the Setup, Sort order & serial number drop down menu and select Separate by band instead of the normal Total of all bands.

Page 9: Setting up Writelog Networking for Contests at PJ2T

Setup, Save Configuration

• Don’t check “Packet” for an unassisted Single Op contest

• It’s usually best to use Geoff’s address unless you are going to be submitting the log yourself.

Page 10: Setting up Writelog Networking for Contests at PJ2T

Radio Dropdown Menu

• If it’s a Multi/2 contest, on Station 1, select Radio, This Radio Is Run (A) Radio

• On Station 2, make that radio (B).

Page 11: Setting up Writelog Networking for Contests at PJ2T

Final Master Log Example

Page 12: Setting up Writelog Networking for Contests at PJ2T

Procedure Step 2:Open Master Log from Station 1 and Save it on Station 2

• Move to the PC at Station 2

• Start Writelog and select Browse for existing log

• On the “Open” screen, click Network, then double-click on the entry for the PC at Station # 1. (That PC will be designated something like “PC35.” See the white paper label on the Station # 1 computer to know for sure.)

• If you are asked for a user name and password, both are PJ2T (in all caps).

Page 13: Setting up Writelog Networking for Contests at PJ2T

• Then click on Writelog, then on Contest, and then on the name of the master log you created at Station 1.

• This will open an EXACT REPLICA of the master log that you created on Station 1.

• Save that log on the local C:\ drive on Station 2 (see next page).

Procedure Step 2:Open Master Log from Station 1 and Save it on Station 2

(continued)

Page 14: Setting up Writelog Networking for Contests at PJ2T

• Then save the log on the local C:\ drive of Station 2 by doing Writelog File, Save As, and click on Computer, then Local Disk (C), then Writelog, then Contest, and finally Save. Examples below.

• When this is complete, you will have identical logs on C:\ of Station 1 and Station 2.

Procedure Step 2:Open Master Log from Station 1 and Save it on Station 2

(continued)

Page 15: Setting up Writelog Networking for Contests at PJ2T

• Now move to the Station 3 PC and do the same thing to open the Master log from Station 1 and save it on the local C:\ drive on Station 3.

• Move to Station 4 PC and do the same thing to open the Master log from Station 1 and save it on the local C:\ drive on Station 4.

Procedure Step 3:Open Master Log from Station 1 and Save it on Station 3, then again

on Station 4

Page 16: Setting up Writelog Networking for Contests at PJ2T

Procedure Step 4: Link PCs Together Using Writelog Networking

• At this point we have four exact copies of Writelog on four computers, but they are not yet communicating on the Writelog network.

• Now we need to follow the procedure on the next page to create the links so that the network will look like this:

Station 1PC

Station 2PC

Station 3PC

Station 4PC

Writelog Master Computer

Writelog networking link

Writelog networking link

Writelog networking link

Page 17: Setting up Writelog Networking for Contests at PJ2T

• On the Station 1 PC, do Writelog Setup, Register to accept network connections…

• In the resulting window (below), be sure to click Tcp/IP, put in A for the distinguishing letter, and then click “OK.”

• Do Setup, Save Configuration and then do File, Save to retain these changes.

Procedure Step 4:Link PCs Together Using Writelog Networking

• (At PJ2T, Station 1 is always “A”, Station 2 “B”, etc. )

Page 18: Setting up Writelog Networking for Contests at PJ2T

• Now go to the PC at Station 2 and do Writelog Setup, Register to accept network connections, and put in “B”, select Tcp/IP, and click “OK.”

• Still at Station 2, again do Setup, link to network, and in the resulting screen, put in PC35 or whatever is the number pasted on the PC at Station 1 and click “OK.”

• After a moment or two Writelog will do its magic and the PC at Station 2 will be networked to its master at Station 1.

• Do Setup, Save Configuration and then do File, Save to retain these changes.

Procedure Step 4: Link PCs Together Using Writelog Networking

Page 19: Setting up Writelog Networking for Contests at PJ2T

• The network will now look like the diagram below.

• Now go to Station 3 and repeat the preceding procedure, designating that PC as “C” and then linking it to the machine at Station 1.

• Do the same thing at Station 4, designating that PC as D and linking it to the PC at Station 1.

Station 1PC

Station 2PC

Station 3PC

Station 4PC

Writelog Master Computer

Writelog networking link

Procedure Step 4: Link PCs Together Using Writelog Networking

Page 20: Setting up Writelog Networking for Contests at PJ2T

• Usually the Station 3 PC is used to Telnet to a PacketCluster. This makes it easy to reconnect when necessary without bothering the operators at Stations 1 or 2.

• Find the Writelog Packet Terminal window. (It is often hidden underneath the Writelog main window.)

• If you can’t find it, open it from Writelog, Window, Packet Window

• Then do File, Telnet… and enter the address of the desired PacketCluster as shown.

• When the connect occurs, log in as PJ2T.

Procedure Step 5: Log Into a PacketCluster from Writelog

Page 21: Setting up Writelog Networking for Contests at PJ2T

• At this point, spots are only flowing to the PC at Station 3, or whichever one you just Telnetted to. • Writelog has the capability to send those spots over the Writelog network• Go to the Station 1 PC, find or bring up the Writelog Packet Terminal Window, and do File, Local

network… and enter the PC number of the PC that is Telnetted to a cluster. This is usually the PC at Station 3.)

• Wait a moment and you should see spots appearing at Station 1.

Procedure Step 6: Network Packet Spots to All Other Writelog Computers

• Now do the same thing at Stations 2 and 4 and you will have spots flowing to all four PCs.

Page 22: Setting up Writelog Networking for Contests at PJ2T

Done: The Logs are Built and Networked

• Now you’ve established the network as shown below.

Station 1PC

Station 2PC

Station 3PC

Station 4PC

Writelog Master Computer

Writelog networking link

Writelog networking link

Writelog networking link

K3LR, W8WTS,or other PacketClusternode

Writelog Telnet link

Internet

Page 23: Setting up Writelog Networking for Contests at PJ2T

Other Setup Considerations

• Be certain that you have the latest .CTY files from the contest committees.

• Carefully check the date and time on every computer to be sure that they are correct and are synchronized to the Internet time servers.

• (The new Dell Windows 7 machines are set up to synchronize to the Internet time servers automatically.) Start; Control Panel; Clock, Language, and Region; Set the time and date; Internet Time tab.

• For CW contests, be sure that the stored CW messages are as you want them, as shown in the Writelog Setup, CW/RTTY/SSB messages… dropdown below.

Page 24: Setting up Writelog Networking for Contests at PJ2T

When Things Go Wrong

• If the spots stop coming in, first try to reconnect to the Station 3 PC

• If that fails, or if you are at Station 3 itself, check to see if you are still logged into the PacketCluster. If not, then reconnect using File, Telnet… and enter the address of the desired PacketCluster as shown.

• When the connect occurs, log back in as PJ2T.

Page 25: Setting up Writelog Networking for Contests at PJ2T

• If one of the computers becomes disconnected from the Writelog network, simply do Setup, register to accept network connections and then Setup, Link to network and re-link to Station 1’s PC.

• If a computer stops altogether, try to restart Writelog. If it starts OK, answer “No” to the question about the journalled file, let Writelog start, then reconnect to the network.

• Writelog will automatically resynchronize the computer with the other logs in about 15 seconds.

• If nothing else works, do a cold restart of the bad PC and re-network it into the Writelog network and it will come up and resynchronize automatically.

When Things Go Wrong

Page 26: Setting up Writelog Networking for Contests at PJ2T

Quick Start Checklist

• Build log at Station 1• Be sure to configure super check partial• Setup, Ports for radio and CW, then Save the log• Open that log at Stations 2, 3, 4 and save on the local C: drives• Network 2, 3, and 4 to Station 1 using Setup, register to accept network connections and Setup,

Link to network• For M/2, set up Radio A at Station 1 and Radio B at Station 2• For WPX, set up Serial numbers separate by band• Telnet to a PacketCluster on Station 3 PC• Writelog Packet Terminal, File, Local Network to Station 1 PC on 1, 3 and 4• Check date and time on all computers• Resave log and configuration on all computers• Don’t log any QSOs until contest begins.