setting up connection between bw and r/3 for data load · 2019-11-12 · setting up connection...

Setting up Connection between BW and R/3 for Data Load

Applies to: SAP BI 7.0. For more information, visit the Business Intelligence homepage.

Summary

This document guides to establish connection between BW and R/3, so as there can two way communications for various purposes. This can be done by simply creating source system in T-Code SCC4 and later generating Partner Profile. This information is available easily on help.sap.com and SDN (see related links), but this setting is not enough to have data transfer between R/3 and BW. To achieve one is expected to make setting for Message types, which will behave as a protocol for communication between the two systems. So this document takes you step by step to create source system and which message types to use for communication.

Author: Aadil Siddiqui

Company: Patni Computers

Created on: 13th October 2008

Author Bio

Aadil Siddiqui is currently working in Patni Computers Ltd. He is working on SAP BI 7.0 and is mainly involved in Development and Enhancement work.

SAP COMMUNITY NETWORK SDN - sdn.sap.com | BPX - bpx.sap.com | BOC - boc.sap.com © 2008 SAP AG 1

https://www.sdn.sap.com/irj/sdn/nw-bi


Table of Contents Communication Setting between BW and R/3: ..................................................................................................3 Step 1: Define Logical System in R/3. ................................................................................................................4 Step 2: Assigning Logical System to Client. .......................................................................................................5 Step 3: Setting Up an RFC Destination. .............................................................................................................6 Step 4: Distributing Data Model: .........................................................................................................................7

Message Types Involved in Process of Data Loading:...................................................................................7 Step 5: Generating Partner Profile ...................................................................................................................11 Step 6: Maintaining Message types in T-Code WE20:.....................................................................................13 Related Content................................................................................................................................................15 Disclaimer and Liability Notice..........................................................................................................................16



Communication Setting between BW and R/3: This document guides one to establish connection setting between BW and R/3 for data loading and other communications. Generally when we start working on a new system or if we want to have connection between BW and any other source system of our choice, we have to contact maybe the basis to team to setup connection. But here we can understand the very simple way to connect any source system with your BW system.

All one needs to do is go through the following steps and the systems will be ready to transfer data.

Creating Source System (SALE): This step creates source systems which are to be connected.

1. Assigning Source System to Client (SALE): This step gives a logical name to a SAP Client from which the communication is to be established.

2. Setting up RFC Destination (SM59): This step is required to establish remote connection to the partner with which Source system is trying to communicate. Here one has to maintain the logon and IP details of the target system.

3. Distributing Data Model (BD64): A distribution model is used to model a distributed environment in which you specify messages exchanged between sending and receiving systems. Here one has to define the message protocols with which the two systems will communicate.

4. Generating Partner Profile (BD82): This process generates a partner profile for each system with which your system communicates. Outbound records are created in the partner profile for each outgoing message, and inbound records are created for each incoming message.

Note: If one distributes Data Model before generating partner profile then one has to redefine partner profile in other system also (repeat step in both system). In this document we are generating partner profile after Distribution of data model so as to demonstrate how to maintain inbound and outbound message types in WE20.

5. Maintaining Message Types (WE20): This process is optional. Generally while generating partner profiles we automatically get the respective Outbound and Inbound messages, which can be checked in T-Code WE20. If the message types are not defined then one can manually do it by following this process.

These steps will ensure that the BW and other source systems are in sync and will communicate as expected.



Step 1: Define Logical System in R/3. Log into R/3 and then go to transaction SALE. Here under IDoc Interface / Application Link Enabling (ALE)

Basic Settings Logical Systems Define logical system. Here one can define the source systems one wants to connect. Make entries for both R/3 and BW system.

T-Code: SALE

Defining Logical systems

Please repeat the same step in BW also.



Step 2: Assigning Logical System to Client. Once logical systems have been defined, next step is to assign these systems to respective clients. The link basically establishes a logical name for an SAP client in the distribution process. A one-to-one relationship exists between a logical system and a client. Again, this setting is required on every system involved in the process.

Once an entry is made in above screen, one is navigated to next screen where standard settings are needed to be maintained. Here importantly one needs to maintain the Logical system that is needed to be assigned. Then save the settings.

Please repeat the same step in BW also with respective client number for BW.



Step 3: Setting Up an RFC Destination. In this step, you create an RFC destination on the local system for each remote SAP system with which you want to communicate. In the RFC destination, you specify all the information necessary to log on to the remote system to execute functions remotely, including the host name, the user ID, the password, the client, the system number, and additional communication settings. So after creating a new entry of type ABAP Connection (The ALE process uses type R/ 3 connections to communicate with a remote SAP system, and the EDI process uses type TCP/IP connections to communicate with the EDI subsystem), one is expected to fill in details in Technical tab. Fill the Target Host Id (this should be same as defined in SALE) and give System No. and IP Address of the target system or the Alias for the system as shown below:

Next in the Logon & Security tab, fill login details for the target system (in this case BW).



Please repeat the same step in BW also but select source system as R/3 in SM59.

Step 4: Distributing Data Model: Having created the basic ALE Infrastructure (till step SM59), lets move forward to Distribute the data model. A distribution model is used to model a distributed environment in which you specify messages exchanged between sending and receiving systems. You must create the model on the system that will be the model's owner. This owner is responsible for maintaining the model and distributing it to various systems. Other systems are prohibited from making changes to the model. Following steps are involved in this process.

1. Maintain a distribution model. 2. Generate a partner profile. 3. Distribute Data Model.

You begin by clicking the Create Model View button on the main screen of transaction BD64.

Once Distribution Model is created, let’s add Message type using which the sender and receiver system will communicate (in this case BW and R/3 also remember that the communication will be both ways i.e. from R/3 to BW and from BW to R/3). To achieve this, place cursor on Model created (VCR3BW) and click on Add Message type button on top right corner. This will open a dialog button where fill the sender system id and receiver system id.

Message Types Involved in Process of Data Loading:

RSRQST: This message type is send by BW to R/3 while loading any data. This gives information about the data source, selection condition and other BW settings to R/3. As and when a load is started in BW, RSRQST message type is sent to R/3 requesting for data.

RSINFO: Once R/3 receives RSRQST message from BW, it sends an acknowledgement message type to BW informing about the status of request. That is whether the request can be handled or not by R/3. It also gives information about how many data packages are being send and what is the total number of records extracted for the given data source and selection.

RSSEND: After sending a positive acknowledgement to BW, R/3 starts the extraction job and starts collecting data in data idocs. This message type carries the actual data with it into the BW system.

For more details on this please check my earlier article. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d

Hence we need to maintain these message types for the distribution model we created above. But make sure that correct messages are assigned to correct system.


https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d


So Click on Add Message Type and give sender as R/3 system and receiver as BW system and message type as RSINFO.

Similarly add message type RSSEND from R/3 to BW.

Now add message type RSRQST from BW to R/3.



Having created the Distribution model, let’s distribute this model. This process will replicate a similar setting in BW side automatically.

Please note that Distribution of data model is not needed to be repeated in BW side as this step automatically replicates settings in BW.

Go to Edit Model View Distribute.

Choose the target system in which the settings needs to be replicated.



Step 5: Generating Partner Profile This process generates a partner profile for each system with which your system communicates. Outbound records are created in the partner profile for each outgoing message, and inbound records are created for each incoming message. You can execute transaction WE20 to view the partner profiles generated by this transaction.

Next, one is taken to following screen where one can define the partner system id and the user that communicates.



After this Execute and wait for the system messages which inform whether partner profile was successfully created or not.

Hence the partner profile was successfully generated…



Now logon on to the BW system and go to T-Code BD64 and test the partner profile settings, whether they are correctly transmitted or not. We can execute it here (in BW) also and get our settings tested.

Step 6: Maintaining Message types in T-Code WE20: Again we need to follow this activity both in BW and R/3. When in R/3 systems WE20, then click on BW system id, and check whether Outbound and Inbound parameters are correctly filled if not then fill it manually as below:

Depending on your client settings one can define different message types for eg:



Now test once again for Partner profile setting and we are ready to have data transfer between BW and R/3 (this can be done directly using T-Code BD82).



Related Content • http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc • https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-

86e1062f1a2d • http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf • For more information, visit the Business Intelligence homepage


http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc



http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf

https://www.sdn.sap.com/irj/sdn/nw-bi



Disclaimer and Liability Notice This document may discuss sample coding or other information that does not include SAP official interfaces and therefore is not supported by SAP. Changes made based on this information are not supported and can be overwritten during an upgrade.

SAP will not be held liable for any damages caused by using or misusing the information, code or methods suggested in this document, and anyone using these methods does so at his/her own risk.

SAP offers no guarantees and assumes no responsibility or liability of any type with respect to the content of this technical article or code sample, including any liability resulting from incompatibility between the content within this document and the materials and services offered by SAP. You agree that you will not hold, or seek to hold, SAP responsible or liable with respect to the content of this document.

setting up connection between bw and r/3 for data load · 2019-11-12 · setting up connection...

Documents