sessions cerie 2011 jan 09
TRANSCRIPT
1
CONFERENCE OPENING CEREMONY
Date: 11th
January 2011
8:00 AM ~9.00 AM Registration
9:00AM – 11:00 AM Inaugural Session
Venue: Mini Auditorium, SUST,
Chief Guest: Architect Yeafesh Osman
Hon’ble State Minister
Ministry of Science, Information & Communication Technology
Govt. of the Peoples’ Republic of Bangladesh
Plenary Speaker: Prof. Dr. A.M.M. Safiullah, Former Vice-Chancellor,
BUET, Dhaka
“Designing Engineering Education for the 21st Century”
Chairman: Prof. Dr. Md. Saleh Uddin, Hon’ble Vice-Chancellor, SUST,
Sylhet
Convener: Prof. Dr. Mohammad Iqbal, Dean, School of Applied Sciences &
Technology, SUST, Sylhet
11:00A – 11:30 AM TEA BREAK
2
TECHNICAL SESSIONS
DAY 1, 11/01/’11
CHEMICAL & PETROLIUM ENGINEERING SESSION
CHAIR: Prof. Dr. Md. Akhtarul Islam, Dept. of Chemical Engineering and Polymer Science, SUST, Sylhet- 3114,
Bangladesh
Session Time Title Venue
CH
EM
ICA
L &
PE
TR
OL
IUM
EN
GIN
EE
RIN
G
11:30-12:10
Small angle neutron scattering studies on SDS micelles, I. Kamal et al. INST,
AERE, Bangladesh. (CERIE-148)
AC
AD
EM
IC B
UIL
DIN
G -
“B
”, R
OO
M N
O.
- “1
11
”
12:10-12:40
Tailoring MgH2 with Mg-Nb-O Towards Hydrogen Storage, Dipartimento di
Chimica IFM, NIS Centre of Excellence, Università di Torino, Via Pietro Giuria 9,
10125, Torino, Italy. (CERIE-163)
12:40-1:10
Electro-catalytic reduction of NO2–: Platinum Modified Glassy Carbon Electrode,
M.A. Rashed et al. SUST, Sylhet, Bangladesh. (CERIE-101)
1:10-2:00
LUNCH BREAK
CHAIR: Dr. Rocksana Begum, Dept. of Chemistry, SUST, Sylhet- 3114, Bangladesh
2:00-2:20
A composite photo catalyst for methylene blue degradation under visible light
irradiation, M Afsar Uddin et al. SUST, Sylhet, Bangladesh. (CERIE-99)
2:20-2:40
Numerical investigation of particle properties on coal gasification under CO2
atmosphere, Md. Saiful Alam et al. SUST, Sylhet, Bangladesh. (CERIE-119)
2:40-3:00
Dissimilar behavior of Ag modified Pt and Pd cathodes on the reduction
mechanism of NO3– at H
+–conducting solid polymer electrolyte reactor, M.A.
Hasnat et al. SUST, Sylhet, Bangladesh. (CERIE-98)
3:00-3:20
The integration technologies of photovoltaic power to the utility grid-a review,
Nur Mohammad et al. Chittagong University of Engineering and Technology,
Chittagong- 4349, Bangladesh. (CERIE-96)
3:20-3:40
BREAK
3:40-4:00
Application of Nanotechnology for Development of High Efficient Solar-Cell,
T.H. Mahdi et al. BUET, Dhaka, Bangladesh (CERIE-159)
4:00-4:20
Energy dense Liquid through Pyrolysis of Biomass Solid Waste: Coconut shell,
M.R.I. Sarker et al. Rajshahi University of Engineering and Technology, Rajshahi-
6204, Bangladesh. (CERIE-181)
3
DAY 1, 11/01/11.
CIVIL ENGINEERING and ARCHITECTURE SESSION
Chair: Professor Dr. Mohammod Aktarul Islam Chowdhury, Department of Civil and Environmental Engineering,
SUST, Sylhet-3114, Bangladesh.
Session Time Title Venue
CIV
IL E
NG
INE
ER
ING
an
d A
RC
HIT
EC
TU
RE
11:30-11:50
Study on optimal building height for inserting seismic base isolator as favorable
option, A.B.M. Saiful Islam et al. University of Malaya. Malaysia. (CERIE -154)
AC
AD
EM
IC B
UIL
DIN
G “
C”
RO
OM
NO
. “1
17
”
11:50-12:10
Development of strength-duration relationship for mortar, H.M.A.Mahzuz et al.
SUST, Sylhet, Bangladesh. (CERIE -123)
12:10-12:30
Design recommendations for eliminating premature shear failure of flexurally
strengthened RC beams, M.A. Rahman et al. University of Malaya, Malaysia.
(CERIE -174)
12:30-12:50
Effect of fineness modulus of sand on concrete properties, Ishtiaque Ahmed Tuhin
et al. SUST, Sylhet, Bangladesh. (CERIE -189)
12:50-1:10
Human thermal comfort on the basis of air movement and ventilation: study of a
specific residence. Masud Rashid et al. Ahsanullah University of Science and
Technology, Dhaka, Bangladesh. (CERIE-289)
1:10-2:00
LUNCH BREAK
Chair: Professor Dr. Qazi Azizul Mowla, Department of Architecture, BUET, Dhaka,
Bangladesh.
2:00-2:20
Crisis in the Built Environment of Dhaka: An Overview,
Qazi Azizul Mowla, BUET, Dhaka, Bangladesh. (CERIE-89)
2:20-2:40
Climate change and Climate Refugee Nexus in Bangladesh context, Professor, Qazi
Azizul Mowla, Department of Architecture, BUET, Dhaka, Bangladesh et al.
(CERIE-88)
2:40-3:00
Informal sector water-utility management: potential urban-slum upgradation policies
in Bangladesh, Md. Mohataz Hossain et al. BUET, Dhaka, Bangladesh. (CERIE-
161)
3:00-3:20
Learning from Islamic Heritage: an Assessment of Climate Change Impacts on
Mughal buildings in Dhaka, Md Mohataz Hossain et al, BUET, Dhaka, Bangladesh.
(CERIE-162)
3:20-3:40
BREAK
3:40-4:00
Strengthening of square RC column using low-cost square ferrocement jacketing
technique, A. B. M. Amrul et al. HBRI, Bangladesh. (CERIE -182)
4:00-4:20
Integration of performance based modeling techniques with building design method
considering energy efficiency in Bangladesh. Dr. Md. Rabiul Alam et al. Chittagong
University of Engineering and Technology, Chittagong- 4349, Bangladesh. (CERIE-
262)
4:20-4:40
The three-step method of computer generated visualization in architecture practice
in Bangladesh, Masud Rashid, Ahsanullah University of Science and Technology,
Dhaka, Bangladesh. (CERIE -190)
4:40-5:00 An Observation on the Acoustical Environments of Auditoriums in Dhaka.
Matluba Khan, BUET, Dhaka, Bangladesh. (CERIE-141)
4
PROGRAM SCHEDULE- DAY 1; 11/01/’11.
MATERIALS, WATER RESOURCE & ENVIRONMENTAL ENGINEERING SESSION
CHAIR: Prof. Dr. Md. Jahir Bin Alam, Dept. of Civil and Environmental Engineering, SUST, Sylhet, Bangladesh.
Session Time Title Venue
MA
TE
RIA
LS
, W
AT
ER
RE
SO
UR
CE
& E
NV
IRO
NM
EN
TA
L E
NG
INE
ER
ING
11:30-11:50
ENVIRONMENTAL DEGRADATION DUE TO THE URBANIZATION OF DHAKA-
NARAYNGANJ -DEMRA (DND) PROJECT AREA, Provat K. Saha et al. BUET,
Dhaka, Bangladesh. (CERIE-109)
LIB
RA
RY
BU
ILD
ING
(G
RO
UN
D F
LO
OR
) R
OO
M :
PG
D-1
11:50-12:10
Noise pollution in Dhaka city – its harmful effects and Preventive measures,
M.A.Hannan et al. Dhaka University of Engineering and Technology, Gazipur,
Bangladesh. (CERIE-93)
12:10-12:30
Use of bamboo in morter & concrete as a construction material
H.M.A.Mahzuz et al. SUST, Sylhet, Bangladesh. (CERIE -122)
12;30-12:50
Divination of earthquake time history for Dhaka region and appraisal with familiar
earthquake records. A.B.M. Saiful Islam et al. University of Malaya. Malaysia.
(CERIE -155)
12:50-1:10
Historical analysis and aridity index mapping for agricultural drought study in north
western region of Bangladesh,Umme Salma Rima et al. Ahsanullah University,
Dhaka, Bangladesh. (CERIE -134)
1:10-2:00
LUNCH BREAK
CHAIR: Dr. Tauhid–Ur- Rahman, Dept. of Civil and Environmental Engineering, SUST,
Sylhet, Bangladesh.
2:00-2:20
Feasibility study assessment of eco-toilet and its challenges in Sylhet city,
Abul Abrar Masrur et al. SUST, Sylhet, Bangladesh. (CERIE-135)
2:20-2:40
A GIS based study on urban rainwater harvesting option using roof catchment,
Shams Al-Amin et al. Ahsanullah University, Dhaka, Bangladesh. (CERIE-142)
2:40-3:00
Solid waste management system of Narayanganj city: an environmental study,
Asib Ahmed et al. Dhaka University. (CERIE-152)
3:00-3:20
Appraisal of research progress on flexural strengthening of RC continuous T beam
in the negative moment region by means of CFRP laminate,
M.Z. Jumaat et al. University of Malaya. Malaysia. (CERIE -164)
3:20-3:40
BREAK
3:40-4:00
Design Construction and Performance Study of a Cascade Type Real Impactor for
Atmospheric Particulate Pollutant Measurement, Md. Ashraful Islam et al. Khulna
University of Engineering and Technology, Khulna- 9203, Bangladesh. (CERIE-
180)
4:00-4:20
Modeling groundwater flow and advective transport of salinity in the unconfined
aquifer of southwest Bangladesh, Sajal K Adhikary et al. Khulna University of
Engineering and Technology, Khulna- 9203, Bangladesh.(CERIE-183)
4:20-4:40
Reservoir operation considering environmental flow requirements in the hari rod
river basin, Afghanistan, Sajal K Adhikary et al. Khulna University of Engineering
and Technology, Khulna- 9203, Bangladesh. (CERIE-184)
4:40-5:00 Impact of Seismic Load on Masonry Building and Strengthening Against Seismic
Loading, Mostafa Muhiuddin Ferdous et al. Khulna University. (CERIE-191)
5
DAY 1, 11/01/11.
COMPUTER SCIENCE & ENGINEERING SESSION
Chair: Prof. Dr. Muhammed Zafar Iqbal, Department of Computer Science and Engineering, SUST, Sylhet,
Bangladesh
Session Time Title location
CO
MP
UT
ER
SC
IEN
CE
& E
NG
INE
ER
ING
11:30-11:50
A new approach of e-banking through the use of Mobile, Post-office and VPN in the
perspective of Bangladesh, Anupam Kumar Bairagi et al. Khulna University.
Bangladesh.(CERIE-113)
AC
AD
EM
IC B
UIL
DIN
G “
A"
RO
OM
NO
. “
Min
i. A
ud
ito
riu
m”
11:50-12:10
CSP: easy and faster decimal logarithm computation,
Dr. Liakot Ali et al. BUET, Dhaka, Bangladesh. (CERIE-118)
12:10-12:30
New technique for high speed decimal logarithm computation of decimal floating-
point number, Dr. Liakot Ali et al. BUET, Dhaka, Bangladesh. (CERIE -129)
12:30-12:50
Development of a software for calculating the thermodynamic and transport
properties of lithium bromide aqueous solution, Md. Abdul Wakil et al. Khulna
University of Engineering & Technology, Khulna, Bangladesh. (CERIE -158)
12:50-1:10
Performance Evaluation of Kalman Filter in Accoustic Echo Cancellation. A. K. M.
Kamrul Islam, Department of Computer Science & Engineering, IUBAT, Dhaka
(CERIE-221)
1:10-2:00
LUNCH BREAK
Chair: Mr. Mohammed Alamgir, Assistant Professor, Department of Computer Science and
Engineering, SUST, Sylhet-3114, Bangladesh.
2:00-2:20
Analysis of four different programmable logic arrays using NAND and NOR based
architecture, Md. Tariq Hasan et al. Khulna University, Bangladesh. (CERIE -172)
2:20-2:40
Interface design of a clients-server distributed system,
Rosina Surovi Khan. Ahsanullah University of Science and Technology, Dhaka,
Bangladesh. (CERIE -177)
2:40-3:00
E-court in Bangladesh: an empirical approach, A. K. M. Kamrul Islam et al.
Jahangirnagar University, Bangladesh. (CERIE -193)
3:00-3:20
Enhanced Genetic Algorithm in Scheduling Problems,
Md. Eamin Rahman. SUST, Sylhet, Bangladesh. (CERIE-366)
3:20-3:40
BREAK
3:40-4:00
A Block Based Data Hiding Method in Images Using Pixel Value Differencing and
LSB Substitution Method, Monowar Hossain, Department of CSE,
Sylhet International University, Sylhet. (CERIE-370)
4:00-4:20
Image guided surgery (IGS) model for emergency surgical intervention (ESI),
Abdulfattah A. Aboaba et al. IIU, Malaysia. (CERIE-397)
4:20-4:40
Exploiting Online Social Networks for Balancing Traffic Loads,
Syed Rakib Rahman, SUST, Sylhet, Bangladesh. (CERIE-219)
6
PROGRAM SCHEDULE –DAY 1; 11/01/’11
ELECTRONICS and COMMUNNICATION ENGINEERING SESSION
CHAIR: Prof. Dr. M Habibul Ahsan, Dept. of Physics, SUST, Sylhet- 3114, Bangladesh
Session Time Title Venue
EL
EC
TR
ON
ICS
& C
OM
MU
NIC
AT
ION
EN
GIN
EE
RIN
G.
11:30-11:50
Optimized latency secured (LS) MAC protocol for large scale clustered sensor
networks, Monir Hossen et al. Khulna University of Engineering and Technology.
(CERIE-137)
AC
AD
EM
IC B
UIL
DIN
G-
“E”;
RO
OM
NO
. -“
12
3”
11:50-12:10
Measurement of circular shaped cables parameters using an image processing
technique, Abu Naim Rakib Ahmed et al. Khulna University of Engineering and
Technology. (CERIE-151)
12:10-12:30
Development of an embedded system for low power message display, S.M. Tofayel
Ahmad et al. Bangladesh University of Science and Technology, Bangladesh.
(CERIE-139)
12:30-12:50
Estimation of optimal time step and compare with the ode solver of MATLAB
package of RLC circuit using numerical methods, Sheikh Md. Rabiul Islam et al.
Khulna University of Engineering and Technology. (CERIE-80)
12:50-1:10
Estimation of Optimal Time Step and Order of Convergence of RL Circuit Model
using Numerical Methods, Sheikh Md. Rabiul Islam et al. Khulna University of
Engineering and Technology. (CERIE-81)
1:10-2:00
LUNCH BREAK
CHAIR: Professor Dr. Ahmad Kabir, Dept. of Statistics, SUST, Sylhet, Bangladesh.
2:00-2:20
A Feasibility Study on Performance of 3G Networks in Urban Areas of Bangladesh,
Mohammad Mirza Golam Rashed et al. Daffodil International University. (CERIE-
307)
2:20-2:40
Design and Development of an Image Processing Based Container Identification
System, M.F. Ismail et al. Bangladesh University of Science and Technology, Dhaka,
Bangladesh. (CERIE-396)
2:40-3:00
Bio-medical data acquisition and transmission using bluetooth technology for medical
application, A.K.M Fazlul Haque et al. Daffodil International University, Bangladesh.
(CERIE-402)
3:00-3:20
Image devoicing using block thresholding, Sheikh Md. Rabiul Islam et al. Khulna
University of Engineering and Technology. (CERIE-233)
3:20-3:40
BREAK
3:40-4:00
Multiscale lmmse- based image denoising with optimal wavelet selection, Sheikh
Md. Rabiul Islam et al. Khulna University of Engineering and Technology, Khulna
Bangladesh. (CERIE-234)
4:00-4:20
Magic in VLSI, Shuza Binzaid et al. University of Information Technology &
Sciences (UITS), Dhaka, Bangladesh. (CERIE-241)
4:20-4:40
Implementation and results of a microcontroller based duobinary encoder circuit for
communication system, R. R. Mahmud at et al. Ahsanullah University of Science
and Technology (AUST), Dhaka. (CERIE-248)
4:40-5:00 Data transmission capacity enhancement in coaxial cable communication system, Md.
Habibullah et al. Khulna University of Engineering and Technology, Khulna.
(CERIE-260)
7
PROGRAM SCHEDULE –DAY 1; 11/01/’11
ELECTRONICS and ELECTRICAL ENGINEERING SESSION
CHAIR: Prof. Dr. Susanto Kumar Das, Dept. of Physics, SUST, Sylhet, Bangladesh.
Session Time Title Venue
EL
EC
TR
ON
ICS
an
d
EL
EC
TR
ICA
L E
NG
INE
ER
ING
11:30-11:50
Designing birefringence of photonic crystal fibers for optical sensing application, M.
A. G. Khan et al. Rajshahi University of Engineering and Technology, Rajshahi,
Bangladesh. (CERIE-312)
AC
AD
EM
IC B
UIL
DIN
: “E
”. R
OO
M N
O.
- “
12
4”.
11:50-12:10
Impedance matched compact zigzag inverted-f antenna for wi-fi operation in a laptop,
Debabrata Kumar Karmokar et al. Khulna University of Engineering and
Technology. (CERIE-315)
12:10-12:30
Fast inter mode decision algorithm for h.264/ AVC video standard,
Md. Salah Uddin Yusuf et al. Khulna University of Engineering and Technology.
(CERIE-324)
12:30-12:50
VCSEL for high speed optical interconnects, Tanjila Ahmed et al. Dhaka
International University, Dhaka. (CERIE-325)
12:50-1:10
A new open loop control strategy of BOOST INVERTERS for PHOTOVOLTAIC SYSTEMS,
Ripan Kumar Dhar et al. Ahsanullah University of Science & Technology, Dhaka,
Bangladesh. (CERIE-330)
1:10-2:00
LUNCH BREAK
CHAIR: Dr. Md. Shah Alam, Dept. of Physics, SUST, Sylhet, Bangladesh.
2:00-2:20
Transceiver circuits for pulse based ultra wideband,
Bobby Barua et al. Ahsanullah University of Science and Technology, Dhaka,
Bangladesh. (CERIE-345)
2:20-2:40
Analysis o f the radiation properties of half-wavelength j-pole antenna arrays, Md.
Imran Momtaz et al. BUET, Dhaka, Bangladesh . (CERIE-79)
2:40-3:00
Radiation from a large circular loop antenna for a series of Fourier harmonic current
distribution. Md. Abdul Matin et al. BUET, Dhaka, Bangladesh . (CERIE-85)
3:00-3:20
Observation of multi domain structures on (001) cub and mono domain structure on
(111) cub surface in 0.91Pb (Zn1/3Nb2/3) O3-0.09 PbTiO3 Single Crystal.
Md. M. Rahman et al. World University of Bangladesh, Dhaka, Bangladesh. (CERIE-
94)
3:20-3:40 BREAK
3:40-4:00
Design and fabrication of a digital power factor meter, Md Selim Hossain et al.
Rajshahi University of Engineering and Technology, Rajshahi. (CERIE-111)
4:00-4:20
An AES processor on a reconfigurable hardware, Ahmed et al. BUET, Dhaka,
Bangladesh. (CERIE-130)
4:20-4:40
Implementation of boost converter for low power application M.F.Rahman. et al.
Rajshahi University of Engineering and Technology. (CERIE-136)
4:40-5:00 Design & implementation of up-converter on FPGA hardware with OFDM
(transmitter & receiver) signal, A. S. M. Iftekhar Uddin et al. Sylhet International
University. (CERIE-144)
8
PROGRAM SCHEDULE –DAY 1; 11/01/’11
INFORMATION- TECHNOLOGY (IT) SESSION
CHAIR: Prof. Dr. Rahmat Ali, Dept. of Statistics, SUST, Sylhet, Bangladesh.
Session Time Title Venue
INF
OR
MA
TIO
N-
TE
CH
NO
LO
GY
11:30-11:50
An effective bayesian personalized e-mail spam filter using word tokenization
method, M. Z. Hoque et al. Pubali Bank Limited, Dhaka, Bangladesh. (CERIE-318)
AC
AD
EM
IC B
UIL
DIN
: “B
”. R
OO
M N
O.
- “
11
3”.
11:50-12:10
A tutorial on comparing optical packet switching and optical burst switching,
Sajjad Waheed et al. Mawlana Bhashani Science and Technology University, Gazipir,
Bangladesh. (CERIE-371)
12:10-12:30
Methodology for cost effective web testing for ecommerce web applications, Md.
Safaet Hossain, et al North South University, Bashundhara, Dhaka, Bangladesh.
(CERIE-420)
12:30-12:50
Development of a voice controlled robotic arm, H. Kabir et al. Chittagong University
of Engineering and Technology, Chittagong- 4349, Bangladesh. (CERIE-218)
12:50-1:10
Mathematical modeling of eye movement, M.S.R. Shoaib et al. University of
Information Technology and Sciences, Dhaka, Bangladesh. (CERIE-240)
1:10-2:00
LUNCH BREAK
CHAIR: Prof. Md. Ahmed Kabir Chowdhury, Dept. of Statistics, SUST, Sylhet, Bangladesh.
2:00-2:20 Mathematical modeling of blood flow, M.S.R. Shoaib et al. University of
Information Technology and Sciences, Dhaka, Bangladesh. (CERIE-236)
2:20-2:40
Dispersion and dispersion slope compensation using linearly chirped apodized fiber
bragg grating, Sher Shermin Azmiri Khan et al. BUET, Dhaka, Bangladesh.
(CERIE-294)
2:40-3:00
Packing Non-Identical Circles in a minimized Circular Container by Modified
Monotonic Basin Hopping Heuristic Approach, A. R. M. Jalal Uddin Jamali et al.,
Dept. of Mathematics, Khulna University of Engineering & Technology, Khulna 9203,
Bangladesh and Dept. of Computer Science, University of Turin, Italy. (CERIE-145)
3:00-3:20
Cost benefit oriented analysis for designing optimum quality Assurance practices,
Md. Safaet Hossain, North South University, Dhaka, Bangladesh. (CERIE-422)
3:20-3:40 BREAK
3:40-4:00
Microwave analysis of a MEMS switch, Md. Asaduzzaman et al. University of
Information Technology and Sciences, Dhaka, Bangladesh. (CERIE-237)
4:00-4:20
Introducing green ICT for digital Bangladesh, Shovan Roy et al. Metropolitan
University, Sylhet, Bangladesh. (CERIE-117)
4:20-4:40
A comparative performance Analysis of 3G and WiMax, Mohammad Mirza Golam
Rashed et al. Daffodil International University, Dhaka, Bangladesh. (CERIE-140)
4:40-5:00 Pattern optimization of a linear dipole antenna through improving directivity and
reducing side lobes, A. S. M. Iftekhar Uddin et al. Sylhet International University,
Sylhet, Bangladesh. (CERIE-143)
9
DAY 1, 11/01/’11.
MECHANICAL & INDUSTRIAL ENGINEERING SESSION
CHAIR: Engr. A B M Abdul Malek, Department of Industrial & Production Engineering SUST, Sylhet- 3114,
Bangladesh
Session Time Title location
ME
CH
AN
ICA
L a
nd
IN
DU
ST
RIA
L E
NG
INE
ER
ING
11:30-11:50
Effect of micron size particle content on tribological behaviors of polymer matrix
composites, BUET, Dhaka. (CERIE-438)
LIB
RA
RY
BU
ILD
ING
(G
RO
UN
D F
LO
OR
) R
OO
M :
PG
D-2
11:50-12:10
Effect of EGR ratio to control particulate matter emission from diesel engine
combustion by using High –Speed combustion model, A.S.M Sayem. et al.
Chittagong University of Engineering and Technology, Chittagong- 4349,
Bangladesh. (CERIE-313)
12:10-12:30
Optimization of supply chain inventory from customer service level perspective,
A.B.M. Abdul Malek. et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-331)
12:30-12:50
Evaluation of an assembly line for higher productivity -an lp modeling approach,
M. A. Hannan. et al. Dhaka University of Engineering and Technology, Gazipur.
(CERIE-364)
12:50-1:10
Evaluation of process capability of an apparel industry using fuzzy inference system,
Md Ahasan Habib. et al. Khulna University of Engineering and Technology, Khulna-
9203, Bangladesh. (CERIE-352)
1:10-2:00
LUNCH BREAK
2:00-2:20 An improved approach to the solution of forward kinematic problems for head
restrain, Md. Fuhad Hassan. et al. Kongju National University. (CERIE-399)
2:20-2:40
Improvement through cellular manufacturing in RMG, Engr. A.B.M. Abdul Malek
et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-426)
2:40-3:00
Improvement of customer perceived quality of synthetic fiber using FUZZY QFD,
Golam Kabir. et al. BUET, Dhaka, Bangladesh. (CERIE-214)
3:00-3:20
Managing safety stocks in a way to profit maximization for the successful application
of inventory management, Khandaker Dahirul Islam. et al. BUET, Dhaka,
Bangladesh. (CERIE-216)
3:20-3:40 BREAK
3:40-4:00
Deicing technology for modern military and commercial aircraft wing surfaces,
Shuza Binzaid. et al. SERES. (CERIE-201)
4:00-4:20
The effects of collaborative supply chain, Md. Ahasan Habib. et al. Khulna
University of Engineering and Technology, Khulna- 9203, Bangladesh. (CERIE-225)
4:20-4:40
Effect of welding parameters on weld metal microstructur, Md. Abdul Hasib. et al.
Khulna University of Engineering and Technology, Khulna- 9203, Bangladesh.
(CERIE-228)
10
DAY 1, 11/01/’11.
SCIENCE & ENGINEERING SESSION
Chair: Professor Dr. Md. Kabir Hossain, Vice-Chancellor, Leading University, Sylhet, Bangladesh.
Session Time Title location
SC
IEN
CE
& E
NG
INE
ER
ING
11:30-11:50
Application of analytic hierarchy process (ahp) in identification of productive
investment sector: a case study in Sylhet of Bangladesh.
M. Z. Hossain et al. SUST, Sylhet, Bangladesh. (CERIE-385)
AC
AD
EM
IC B
UIL
DIN
G “
E” R
OO
M N
O.
“32
5”
11:50-12:10
Population Based Heuristic Approach for Packing Identical Circles in a Minimized
Circular Container. A. R. M. Jalal Uddin Jamali et al, Khulna University of
Engineering & Technology, Khulna, Bangladesh. (CERIE-95)
12:10-12:30
An exploratory study of Vision 2021: Status and Challenges.
Ahsan Habib et al, Metropolitan University, Sylhet. (CERIE -115)
12:30-12:50
Human resources management in garment industries-a database system.
Abul Mukid Mohammad Mukaddes et al, SUST, Sylhet, Bangladesh. (CERIE-127)
12:50-1:10
Development of a Systematic Plan of Action for Quality Improvement in Educational
Institutions: A Total Quality Management (TQM) Approach, Khandaker Dahirul
Islam BUET, Dhaka-1000. (CERIE-354)
1:10-2:00
LUNCH BREAK
Chair: Dr. Md. Mahbubur Rahman, Department of GEB, SUST, Sylhet-3114, Bangladesh.
2:00-2:20 Parallel Computing Using Remote Method Invocation.
Nazmin Akter et al, Metropolitan University, Sylhet, Bangladesh. (CERIE-147)
2:20-2:40
Importance of Physics Education for the Undergraduate Medical Students of
Bangladesh, Dr. Ramit Azad, Department of Operations Management American
International University-Bangladesh, Dhaka, Bangladesh . (CERIE-441)
2:40-3:00
ECG data compression by time based analysis using the correlation between the ECG
signals, Md. Iftekhar Hossain et al, BUET, Dhaka, Bangladesh. (CERIE-126)
3:00-3:20
Design And Development of PC Based Data Acquisition System For Monitoring
Environmental Parameters Using Labview, Md. Abdullah Al Mamun and Anisa
Begum, Atomic Energy Centre, 4 Kazi Nazrul Islam Avenue, Dhaka-1000. (CERIE-
442)
3:20-3:40 BREAK
Chair: Dr. Md. Abul Kalam Azad, Department of GEB, SUST, Sylhet-3114, Bangladesh.
3:40-4:00
Importance of admission test beside academic qualification for selecting students in
public universities of Bangladesh - a case study of SUST, Mohammad Romel Bhuia
et al. SUST, Sylhet, Bangladesh. (CERIE-220)
4:00-4:20
The orientation of Dauki Fault: an approximation using the 2D finite element
modeling, Md. Shofiqul Islam et al, SUST, Sylhet, Bangladesh. (CERIE-90)
4:20-4:40
Identifying risk factors of malnutrition for under five Bangladeshi children:
Application of ordinal logistic regression analysis. S. Das et al. SUST, Sylhet,
Bangladesh. (CERIE-386)
4:40-5:00 Towards creating a technology-enhanced language classroom: some pedagogic
consideration from the perspective of Bangladesh. Mizanur Rahman Jewel et al.
(CERIE-417)
5:00-5:20 Pubertal timing in internationally adopted children: Relation to early life condition
and birth weight, G.M. Rabiul Islam, Department of Food Engineering and Tea
Technology, SUST, Sylhet-3114. (CERIE-407)
11
DAY 1, 11/01/’11.
TELECOMMUNICATION & ENGINEERING SESSION
Chair: Engr. Syed Faruque Ahammed, Head, Department of Computer Science and Engineering,
Sylhet Engineering College, Bangladesh.
Session Time Title location
TE
LE
CO
MM
UN
ICA
TIO
N &
EN
GIN
EE
RIN
G
11:30-11:50
Interference reduction AND capacity enhancement using smart antennas in CDMA
networks, Ummee Tania Ahmed et al. The University of Asia Pacific, Dhaka,
Bangladesh. (CERIE-86)
AC
AD
EM
IC B
UIL
DIN
G “
E”,
RO
OM
NO
. “3
26
”
11:50-12:10
Channel estimation scheme FOR wireless communication systems, Md. Masud Rana,
Khulna University of Engineering & Technology, Khulna, Bangladesh. (CERIE -104)
12:10-12:30
Performance of MIMO-OFDM over flat fading channel using convolution coding,S.
R. Sabuj et al, BUET, Dhaka, Bangladesh. (CERIE -153)
12:30-12:50
Free-space optical communication system under strong turbulence with q-ary pulse-
position modulation, Bobby Barua et al. Ahsanullah university of science and
technology, Dhaka, Bangladesh. (CERIE -120)
12:50-1:10
Energy-efficiency, security and future of the wireless sensor networks, Sajjad
Waheed, Mawlaana Bhashani Science and Technology University, Tangail,
Bangladesh. (CERIE-376)
1:10-2:00
LUNCH BREAK
Chair: Prof. Dr. Md. Rashed Talukder, Department of Mathematics, SUST, Sylhet-3114,
Bangladesh.
2:00-2:20 The infrastructural advancement of e-learning in Bangladesh: A case study of present
status and future expectations, Atikur Rahman Baizid et al. Leading University.
(CERIE -108)
2:20-2:40
Performance analysis of WiFi network for indoor environment ,Mohammad Mirza
Golam Rashed et al. Daffodil International University, Bangladesh. (CERIE -112)
2:40-3:00
Performance analysis of convolutional coding for different channel conditions in
WCDMA, Md.Reaz Ashraful Abedin et al. Khulna University, Bangladesh. (CERIE -
116)
3:00-3:20
Performance Analysis of LDPC Codes for MIMO Wireless Communication Systems,
Md. Masud Rana Khulna University of Engineering & Technology, Khulna,
Bangladesh. (CERIE -106)
3:20-3:40 BREAK
3:40-4:00
Performance analysis of is estimated OFDM system over rayleigh fading channel,
Md. Noor -A- Rahim et al. Khulna University of Engineering & Technology, Khulna,
Bangladesh. (CERIE -82)
4:00-4:20
Wi-Fi protected access (WPA) –PSK (Phase Shift Keying) key cracking using
AIRCRACK-NG, Sheikh Md. Rabiul Islam, Khulna University of Engineering &
Technology, Khulna, Bangladesh. (CERIE -84)
4:20-4:40
Intelligent Traffic Control by CCTV, IC16F877A Microcontroller and IR Road
Sensor, Md. Nur-Us-Safa et al. The University of Asia Pacific, Dhaka, Bangladesh.
(CERIE -87)
4:40-5:00 Low Complexity Uplink Channel Estimation for LTE Systems
Md. Masud Rana, Khulna University of Engineering & Technology, Khulna,
Bangladesh. (CERIE -105)
12
DAY 2, 12/01/’11
FOOD & TEA, CHEMICAL, PETROLIUM ENGINEERING SESSION
CHAIR: Dr. Mainuddin Ahmed, CSO, Bangladesh Tea Research Institute, Srimongal, Moulvibazar
Session Time Title Venue
CH
EM
ICA
L a
nd
PE
TR
OL
IUM
EN
GIN
EE
RIN
G
9:00-9:30 “Tea Industry of Bangladesh – Past Present and Future” Keynote Speaker: Dr. Mainuddin Ahmed, CSO, BTRI, Srimongol, Moulovibazar.
AC
AD
EM
IC B
UIL
DIN
G-
“B”,
Ro
om
No
.: “
11
1”.
9:30-9:50 Structural divergences make plant aquaporins multifunctional membrane channels, Dr.
Abul Kalam Azad, Dept. of Genetic Engineering and Biotechnology, SUST, Sylhet
3114, Bangladesh; Dept. of Life Science and Biotechnology, Shimane Univ, Shimane
690-8504, Japan. (CERIE-400)
9:50-10:10 Coal bed methane (cbm) project, how far to minimize the energy crisis of Bangladesh,
Tahmilur Rahman et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-199)
10:10-10:30 Influence of weather parameters on red spider mite- a major pest of tea in Bangladesh,
M. Ahmed et al. Entomology Division, Bangladesh Tea Research Institute, Srimongol,
Moulovibazar, Bangladesh. (CERIE-405)
10:30-10:50 CRISPR may give important information which can be beneficial in molecular biology
and biotechnology study, Rafiad Islam et al., University of Dhaka, Bangladesh.
(CERIE-322)
10:50-11:10 Economics of Bangladesh tea industry, Dr. J.K.Saha et al. Statistics and Economics
Division, BTRI, Srimangal, Moulovibazar. (CERIE-406)
11:10-11:30 BREAK
CHAIR: Prof. Dr. Syed Shamsul Alam, Dept. of Chemistry, SUST, Sylhet, Bangladesh.
11:30-11:50
Numerical simulation of Titas gas field as a dry gas reservoir,
Md. Talibun Noor Molla et al. SUST, Sylhet, Bangladesh. (CERIE-334)
11:50-12:10
Shale volume and porosity assessment of Titas gas field using wireline log data in
bengal basin, Mohammad Islam Miah et al. SUST, Sylhet, Bangladesh. (CERIE-336)
12:10-12:30
Engineering classification of Shari Ghat River bed sand and prospect of it’s utilization
in different construction sectors, A.S.M. Golam Hossain et al. SUST, Sylhet,
Bangladesh. (CERIE-337)
12:30-12:50
Comparable analysis of engineering properties between crushed hard rock dust of
Maddhyapara granite mine, Dinajpur and natural sand. Tareq-Uz-Zaman et al. SUST,
Sylhet, Bangladesh. (CERIE-338)
12:50-1:10
Prospect of utilization of crushed hard rock dust of Maddhyapara granite mine,
Dinajpur as partial as well as complete replacement material for sand in concrete,
Tareq-Uz-Zaman et al. SUST, Sylhet, Bangladesh. (CERIE-339)
1:10-2:00
LUNCH BREAK
13
DAY 2, 12/01/’11
FOOD & TEA, CHEMICAL, PETROLIUM ENGINEERING SESSION
CHAIR: Prof. Dr. Ijaz Hossain, Dept. of Chemical Engineering, BUET, Dhaka, Bangladesh.
Session Time Title Venue
CH
EM
ICA
L &
PE
TR
OL
IUM
EN
GIN
EE
RIN
G
2:00-2:30 "3R Options for Industry"
Keynote Speaker: Prof. Dr. Ijaz Hossain, Dept. of Chemical Engineering, BUET,
Dhaka, Bangladesh
AC
AD
EM
IC B
UIL
DIN
G –
“B”,
RO
OM
NO
.-“1
11
”. 2:30-2:50
Development of a CSTR for the treatment of industrial wastewater by adsorption,
coupling with coagulation, Mitun C. Bhoumick et al. SUST, Sylhet- 3114,
Bangladesh. (CERIE347)
2:50-3:10
Electricity generation by a membrane less microbial fuel cell during waste water
treatment , Tammin Haque et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-349)
3:10-3:30
Biogas from municipal solid waste, Salma A. Iqbal et al. SUST, Sylhet, Bangladesh.
(CERIE-350)
3:30-3:40 BREAK
3:40-4:00
Risk and hazard identification and assessment and safety management in petroleum
engineering fields in Bangladesh, Md. Tanbir Ahmed Choudhury et al. SUST, Sylhet,
Bangladesh. (CERIE-363)
4:00-4:20
A review of the numerical solutions of dimensionless radial flow diffusivity equation
using Laplace transforms Md. Alomgir Hossain et al. SUST, Sylhet, Bangladesh.
(CERIE-351)
4:20-4:40
The effect of percentage of hollow lumen on the mechanical properties of bangle white
grade b jute fiber, Aart Van Vuure et al. Katholieke Universiteit Leuven, Belgium.
(CERIE-374)
4:40-5:00
Reservoir fluid properties analysis of Titas gas field in Surma basin, Bangladesh.
Mohammad Islam Miah et al. SUST, Sylhet, Bangladesh. (CERIE-378)
PROGRAM SCHEDULE –DAY 2, 12/01/’11.
SCIENCE& ENGINEERING SESSION
Chair: Prof. Dr. Nazia Chowdhury, Dept of Physics, SUST, Sylhet-3114, Bangladesh
Session Time Title location
SC
IEN
CE
& E
NG
INE
ER
ING
9:00-9:30 Atmospheric Effects On Photovoltaics Of MEH-PPV, Prof. Nazia Chowdhury et al.,
SUST, Sylhet-3114, Bangladesh. (CERIE-429)
AC
AD
EM
IC B
UIL
DIN
G “
E” R
OO
M N
O.
“32
5”
9:30-9:50 Laser Action In Polyfluorene And Fluorene-Based Co-Polymers, Md. Amdadul Huq et
al. SUST, Sylhet-3114, Bangladesh, (CERIE-428)
9:50-10:10 Use of Waste Plastics With Bitumen For Road Construction, Hazzaz – Bin – Yousuf et
al. SUST, Sylhet, Bangladesh. (CERIE-430)
10:10-10:30 Tensile and electrical properties of wood saw dust reinforced polymer matrix
composites, M. Faruk Hossain et al. BUET, Dhaka, Bangladesh. (CERIE-288)
10:30-10:50 A Study of the Internal Defects Of Various Types Of Construction Materials By Using
Direct Film Neutron Radiography Technique, Sudipta Saha et al. , SUST, Sylhet,
Bangladesh. (CERIE-437)
10:50-11:10 BREAK
14
PROGRAM SCHEDULE –DAY 2, 12/01/’11.
SCIENCE& ENGINEERING SESSION
CHAIR: Dr. Md. Mozzammel Hoque, Food Engineering and Tea Technology, SUST, Sylhet-
3114, Bangladesh
11:10-11:30
Effect Of Micron Size Particle Content On Tribological Behaviours Of Polymer
Matrix Composites. (CERIE-438)
11:30-11:50
Performance of the Two Chamber Microbial Fuel Cell, M. R. Khan et al., SUST,
Sylhet 3114, Bangladesh. (CERIE-439)
11:50-12:10
Construction and Visualization of A Digital Factory Using 3d Modeling Software,
Abdul Awal Md. Saiful Islam et al., SUST, Sylhet-3114, Bangladesh, (CERIE-433)
12:10-12:30
Flexible Workstation Design For Flexible Office Work Using Ergonomics , M Iqbal et
al., SUST, Sylhet-3114, Bangladesh, (CERIE-431)
12:30-12:50
Studies on the properties of epoxy-based polymer modified mortar, Md. Mostafizur
Rahman et al. SUST, Sylhet, Bangladesh. (CERIE -114)
12:50-1:10
Efficient hydrogen peroxide decomposition on bimetallic Pt–Pd surfaces,
M.Maria Rahman et al. SUST, Sylhet, Bangladesh. (CERIE-97)
1:10-2:00 LUNCH BREAK
Chair: Dr. Farhad Howladar, Department of Petroleum and Georesources Engineering, SUST,
Sylhet-3114, Bangladesh
2:00-2:20 Formation water resistivity prediction of titas gas field using self-potential log data,
Bangladesh, Mohammad Islam Miah, Department of Geology, Dhaka University,
Bangladesh. Department of Petroleum and Georesources Engineering, SUST, Sylhet-
3114, Bangladesh. (CERIE-335)
2:20-2:40
Study of the Isotherm and Breakthrough Curve of Methylene Blue Adsorption on
Delonix Regia Leaves (Krishnachura Leaves), K. A. Chowdhury, Center for
Environmental Process Engineering, Department of Chemical Engineering & Polymer
Science, SUST, Sylhet-3114, Sylhet, Bangladesh. (CERIE-353)
2:40-3:00
Flowing gas material balance: a case study of titas gas field, Sonia Aziz Chowdhury et
al. SUST, Sylhet, Bangladesh. (CERIE-333)
3:00-3:20
Software based evaluation of Overall Line Effectiveness (OLE) of a Garments
Industry, Mamunur Rashid, IPE, SUST, (CERIE 443)
3:20-3:40 An Overview Of Geology, Hydrogeology, And Open Pit Mining Perspective of The
Phulbari Gondwana Coal Deposit, Nw Bangladesh, Dr. Md. Rafiqul Islam et al.,
Department of Petroleum & Georesources Engineering. (CERIE-440)
3:40-4:00 Fabrication and characterization of plasmonic nano material & its application in
biosensor development, Nuruddin Ahmed, Department of Chemistry, Carletion
University, Ottawa, Canada (CERIE-449)
15
DAY 2, 12/01/’11.
CHEMICAL & PETROLIUM ENGINEERING SESSION
CHAIR: Prof. Dr. Mohammad Younus, Dept. of Chemistry, SUST, Sylhet- 3114, Bangladesh.
Session Time Title Venue
CH
EM
ICA
L &
PE
TR
OL
IUM
EN
GIN
EE
RIN
G
9:00-9:30 A multivariate analysis of biodiesel production from the lipid of wastewater sludge,
Muhammad N Siddiquee et al. The University of Western Ontario, 1151 Richmond
Street North, London, Ontario, Canada. (CERIE-415)
AC
AD
EM
IC B
UIL
DIN
G-
“B”,
RO
OM
NO
.: “
11
3”.
9:30-9:50 Rule of mixture for predicting the elastic modulus of polymer-fiber and polymer-fiber-
particle composites: a discussion, MA Islam et al. SUST, Sylhet, Bangladesh.
(CERIE-411)
9:50-10:10 Study on the effect of radiation on the chitosan film extracted from prawn shell, N.
Deb et al. M C College, National University, Sylhet-3100, Bangladesh. (CERIE-210)
10:10-10:30 Underground or open pit mining method – An unresolved debate delaying coal mining
in Bangladesh, Md. Alomgir Hossain et al. SUST, Sylhet, Bangladesh. (CERIE-227)
10:30-10:50 Structural analysis of Fenchugonj gas field, Pulok Kanti Deb et al. SUST, Sylhet,
Bangladesh. (CERIE-414)
11:10-11:30 BREAK
CHAIR: Prof. Dr. Mizanur Rahman, Dept. of Chemistry, SUST, Sylhet, Bangladesh.
11:30-11:50
Commonly used reserve estimation methodology for gas reservoirs, Mohammad Asad
Ibne Hossain et al. SUST, Sylhet, Bangladesh. (CERIE-299)
11:50-12:10
Development of acidic mesoporous heterogeneous catalyst for the biodiesel production
from the lipid of wastewater sludge, Muhammad N Siddiquee et al. The University of
Western Ontario 1151 Richmond Street North, London. (CERIE-215)
12:10-12:30
Modern Approach to Estimation of Gas Reserve with Dynamic Reservoir Simulation-
A Case Study of Narshingdi Gas Field, Farhana Akter et al. SUST, Sylhet,
Bangladesh. (CERIE-203)
12:30-12:50
Critical toxicity level of arsenic in akitakomachi rice grown in presence of citrate-fe3+
,
Molla Rahman Shaibur et al. Jessore Science & Technology University, Jessore 7407,
Bangladesh. (CERIE-204)
12:50-1:10
Interring temperatures dependent dielectric properties of polycrystalline CaZn
CuT;O, A. K. M. Akther Hossain et al. Chittagong University of Engineering and
Technology, Chittagong- 4349, Bangladesh. (CERIE-207)
1:10-2:00 LUNCH BREAK
16
DAY 2, 12/01/’11.
CHEMICAL & PETROLIUM ENGINEERING SESSION
CHAIR: Dr. Syeda Sultana Razia, Dept. of Chemical Engineering, BUET, Bangladesh.
Session Time Title Location
CH
EM
ICA
L &
PE
TR
OL
IUM
EN
GIN
EE
RIN
G
2:00-2:20
Formation of 1,1,1 trifluoroethane (143a) in the Freon 22 Reactor, Syeda S. Razia et
al., BUET, Dhaka 1000, Bangladesh. (CERIE-444)
AC
AD
EM
IC B
UIL
DIN
G-
“B”,
RO
OM
NO
.: “
11
3”.
2:20-2:40 Selective oxidation of methane into formic acid by H2O2 through liquid- phase
oxidation, Abul Kalam et al. Jagannath University, Dhaka 1100, Bangladesh. (CERIE-
232)
2:40-3:00 Preparation of titanium dioxide (TiO2) nanoparticles by sol-gel method and study of
photo-catalytic degradation kinetics using different dyes, Sheikh Ariful Haque et al.
Department of Chemical Engineering and Polymer Science,
SUST, Sylhet 3114, Bangladesh. (CERIE-239)
3:00-3:20
Improving the strength behavior of adobes using natural fibers, Md. Zahidul Islam
Bhuiyan, University of Malaya, Kualalumpur. (CERIE-269)
3:20-3:40
BREAK
CHAIR: Dr. Md. Jasim Uddin, Dept of Chemical Engineering, SUST, Sylhet, Bangladesh.
3:40-4:00
Determination of Mass Transfer Coefficient: A Laboratory Demonstration, Formation
of 1,1,1 trifluoroethane (143a) in the Freon 22 Reactor , Syeda S. Razia et al., BUET,
Dhaka 1000, Bangladesh. (CERIE-436)
4:00-4:20
Pressure data analysis and reservoir parameter estimation of Kailsatilla gas field (well
no. ktl-01& ktl-02), Md. Mizanur Rahman et al. SUST, Sylhet, Bangladesh. (CERIE-
273)
4:20-4:40 Genetic engineering: the novel approach to bring food security and to save our
environment from pollution, Shamsul H. Prodhan et al. SUST, Sylhet, Bangladesh.
(CERIE-280)
4:40-5:00
Evolution of reversed mesa ridge waveguide on ALGAAS/GAAS heterostructure
based laser material employing wet etchants, D. M. S. Sultanet al., Photonics
Laboratory, MC2, Chalmers University of Technology, SE 41296, and Gothenburg,
Sweden. (CERIE-277)
5:00-5:20
Modeling and analyzing pressure buildup data of Kailastilla gas field (well no. ktl-01&
ktl-02), Md. Mizanur Rahman et al. SUST, Sylhet, Bangladesh. (CERIE-274)
17
DAY 2, 12/01/’11.
TELECOMMUNICATION & ENGINEERING SESSION
Chair: Prof. Dr. Md. Shajedul Karim, SUST, Sylhet-3114, Bangladesh.
Session Time Title location
TE
LE
CO
MM
UN
ICA
TIO
N &
EN
GIN
EE
RIN
G
9:00-9:30 Mobile radio communication with various digital modulation techniques. Md. S.
Rahman. et al. Rajshahi University of Engineering and Technology, Rajshahi- 6204,
Bangladesh. (CERIE-178)
AC
AD
EM
IC B
UIL
DIN
G “
E” R
OO
M N
O.
“32
6”
9:30-9:50 Multiband Strip Antenna for 2.3/2.5/5.5 GHz WiMAX and 2.4 GHz WLAN
Operations, Debabrata Kumar Karmokar et al. Khulna University of Engineering &
Technology, Khulna, Bangladesh. (CERIE-252)
9:50-10:10 Training Based Channel Estimation Scheme for LTE OFDMA Systems Using LMS
Algorithm, Md. Masud Rana, Khulna University of Engineering & Technology,
Khulna, Bangladesh. (CERIE -107)
10:10-10:30 Inquest of architecture for soa, Sajjad Waheed, Mawlaana Bhashani Science and
Technology University, Tangail, Bangladesh. (CERIE-377)
10:30-10:50 Design and simulation of four bands microstrip patch antenna array for multiband
applications. Md.Tanvir Ishtaique-ul Huque, Rajshahi University of Engineering &
Technology, Rajshahi, Bangladesh. (CERIE-231)
11:10-11:30 BREAK
DAY 2, 12/01/11.
CIVIL ENGINEERING and ARCHITECTURE SESSION
Chair: Prof. Dr. Md. Aminul Islam, Dept. of Materials and Metallurgical Engineering, BUET, Dhaka, Bangladesh.
Session Time Title Location
CIV
IL E
NG
INE
ER
ING
an
d A
RC
HIT
EC
TU
RE
9:00-9:30 Thermo mechanically treated advanced structural steels to improve the
earthquake resistance of buildings.
Keynote Speaker: Prof. Dr. Md. Aminul Islam, Dept. of Materials and Metallurgical
Engineering, BUET, Dhaka, Bangladesh.
AC
AD
EM
IC B
UIL
DIN
G “
C”
RO
OM
NO
. “1
17
”
9:30-9:50 Trend of urban heat island (UHI) in Sylhet city, Mohammod Aktarul Islam Chowdhury
et al. SUST, Sylhet, Bangladesh. (CERIE-362)
9:50-10:10 A study on the noise pollution in vulnerable sites of Sylhet city. M.A.I. Chowdhury et
al. SUST, Sylhet, Bangladesh. (CERIE-355)
10:10-10:30 Effect of aggregate grading on concrete compressive strength. B. Haque et al. SUST,
Sylhet, Bangladesh. (CERIE-356)
10:30-10:50 Evaluation of structural condition and serviceability of a portion of damaged urban
road, Md. Imran Kabir et al. SUST, Sylhet, Bangladesh. (CERIE-357)
10:50-11:10 Rethinking the form of sustainable Cyclone Shelter. Dr. Md Rabiul Alam et al.
Chittagong University of Engineering & Technology, Chittagong, Bangladesh. (CERIE-
358)
11:10-11:30 BREAK
11:30-11:50 Effect of soft storey in reinforced concrete frame structure.
Kashif Mahmud , Islamic University of Technology, Bangladesh. (CERIE-359)
11:50-12:10
Appropriate technique for leachate treatment – a comparative study for Matuail landfill
site, Kashif Mahmud, Islamic University of Technology, Bangladesh. (CERIE-360)
12:10-12:30
A low cost temperature control unit for wastewater respirometer, Mohammad Shahidur
Rahman et al. SUST, Sylhet, Bangladesh. (CERIE-208)
12:30-12:50 Impact and improvement of lateral load resistance using geo-textile.
Mohammad Nurul Islam, Rajshahi University of Engineering & Technology, Rajshahi,
Bangladesh. (CERIE-369)
12:30-12:50 A study on the luminous environment of primary schools in Bangladesh: a case in
Narsingdi. Matluba Khan, BUET, Dhaka, Bangladesh. (CERIE -146)
12:50-1:10 Eco‐housing: material technologies for a sustainable built environment, Mujtaba Ahsan
et al. BUET, Dhaka, Bangladesh. (CERIE -138)
1:10-2:00 LUNCH BREAK
18
DAY 2, 12/01/11.
CIVIL ENGINEERING and ARCHITECTURE SESSION
Chair: Professor Dr. Mohammad Aktarul Islam Chowdhury, CEE, SUST, Sylhet, Bangladesh
Session Time Title Location
CIV
IL E
NG
INE
ER
ING
an
d A
RC
HIT
EC
TU
RE
2:00-2:20
Chloride penetration resistances of fly ash cement mortar, Md. Moinul Islam at el.
Chittagong University of Engineering & Technology, Chittagong, Bangladesh.
(CERIE-373)
AC
AD
EM
IC B
UIL
DIN
G “
C”
RO
OM
NO
. “1
17
”
2:20-2:40
Optimum design of continuous prestress concrete I-girderbridge system, Shamim Kabir
Sarker et al. BUET, Dhaka, Bangladesh. (CERIE-375)
2:40-3:00
Urban heat island (UHI) drifts in Rajshahi city, Mohammod Aktarul Islam Chowdhury
et al. SUST, Sylhet, Bangladesh. (CERIE-381)
3:00-3:20
Shear strength behavior of granular materials: effect of grain size, Mohammad Nurul
Islam et al. Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh.
(CERIE-389)
3:20-3:40
BREAK
3:40-4:00
Sway of reinforced concrete (RC) frames, Monirul Islam et al BUET, Dhaka,
Bangladesh. (CERIE-390)
4:00-4:20
A Regional Assessment of Air Pollution by the Brickfields in Bangladesh,
Mohd. Abdus Sobhan et al. Rajshahi University of Engineering & Technology,
Rajshahi, Bangladesh. (CERIE-217)
4:20-4:40
Ultimate load capacity of axially loaded vertical piles in deposits of Bengal basin,
Ariful Hasnat, The University of Asia Pacific, Dhaka. Bangladesh. (CERIE-206)
DAY 2, 12/01/’11.
COMPUTER SCIENCE &ENGINEERING SESSION
Chair: Professor Dr. M. Gulam Ali Hayder, Department of Mathematics, SUST, Sylhet-3114, Bangladesh.
Session Time Title Location
CO
MP
UT
ER
SC
IEN
CE
& E
NG
INE
ER
ING
9:00-9:30 Visual-miR: Visualization system of precursor microRNA, Md. Eamin Rahman et al.
SUST, Sylhet, Bangladesh. (CERIE-348)
AC
AD
EM
IC B
UIL
DIN
G “
A"
RO
OM
NO
. “
Min
i. A
ud
ito
riu
m”
9:30-9:50 Bit Error Rate for Different Modulation Techniques in OFDM,
Md. Zulfiker Mahmud, Green University of Bangladesh. (CERIE-223)
9:50-10:10 Modeling & performance analysis of photovoltaic modules, Moinuddin ahmad et al.
Khulna University of Engineering and Technology, Khulna- 9203, Bangladesh.
(CERIE-230)
10:10-10:30 An effort to improve software teaching in engineering education,
Zakia Sultana et al. UIU. Dhaka, Bangladesh. (CERIE-401)
10:30-10:50 A knowledge-based system for identifying safe road,
Shima Chakraborty. Dhaka International University, Bangladesh. (CERIE-311)
10:50-11:10 Study, analysis and design of a network intrusion detection system, Sonia Afrin, Dhaka
International University, Bangladesh. (CERIE-314)
11:10-11:30 BREAK
11:30-11:50 Generalization of deutsch-jozsa algorithm with the aid of grover operator, Ayesha
Tasnim et al. SUST, Sylhet, Bangladesh. (CERIE-316)
11:50-12:10
An Efficient Vertical Handoff Initiation Algorithm for Handoff Management in-
between WLAN and WCDMA, Khaled Mahbub Morshed, Department of Electronics &
Communication Engineering, Khulna University of Engineering & Technology,
Khulna- 9203, Bangladesh. (CERIE-327)
12:10-12:30
Development of a software tool for the optimization of GSM cellular system design and
planning. Hossain Md Shahriar Rumi, Dept. of Electrical and Electronic Engineering,
Ahsanullah University of Science and Technology, Dhaka. (CERIE-328)
19
DAY 2, 12/01/’11.
MECHANICAL & INDUSTRIAL ENGINEERING SESSION
Chair: Professor Dr. Mohammad Iqbal, Head, Department of Industrial and Production Engineering, SUST, Sylhet-
3114, Bangladesh.
Session Time Title Location
ME
CH
AN
ICA
L a
nd
IN
DU
ST
RIA
L E
NG
INE
ER
ING
9:00-9:30 A model on industrial information system (IIS), C. A. Anam Rashed et al. SUST,
Sylhet3114, Bangladesh. (CERIE-244)
LIB
RA
RY
BU
ILD
ING
(G
RO
UN
D F
LO
OR
) R
OO
M :
PG
D-2
9:30-9:50 Managing safety stocks in a way to profit maximization for the successful application
of inventory management system in a multinational company.Khandaker Dahirul
Islam. et al. BUET, Dhaka, Bangladesh. (CERIE-169)
9:50-10:10 An experimental investigation on single axis sun tracker by wiper motor. Md. Riaz
Pervez. et al. Rajshahi University of Engineering and Technology, Rajshahi- 6204,
Bangladesh. (CERIE-243)
10:10-10:30 Job-shop scheduling using artificial neural network. Abdullah Al-Faruk. et al. Khulna
University of Engineering and Technology, Khulna- 9203, Bangladesh. (CERIE-245)
10:30-10:50 Trends of environment friendly product design in Bangladesh,
Md. Shahriar Jahan Hossain. et al. Rajshahi University of Engineering and
Technology, Rajshahi- 6204, Bangladesh. (CERIE-246)
10:50-11:10 Energy of a raindrop and scope of harvesting raindrop energy. Md. A. Uddin. et al.
BUET, Dhaka, Bangladesh. (CERIE-249)
11:10-11:30 BREAK
11:30-11:50
Experimental analysis on the heat transfer performance of an ammonia-charged
pulsating heat pipe, T.H. Mahdi. et al. BUET, Dhaka, Bangladesh. (CERIE-398)
11:50-12:10
Opportunities for six sigma in Bangladeshi industries. Kazi Arif-Uz-Zaman et al.
Khulna University of Engineering and Technology, Khulna- 9203, Bangladesh.
(CERIE-253)
12:10-12:30
Prospect of industrial engineering techniques and their applications. A.M.M. Nazmul
Ahsan. et al. Khulna University of Engineering and Technology, Khulna- 9203,
Bangladesh. (CERIE-255)
12:30-12:50
Bubble burst control using smart structure sensor actuators for stall
suppression.Mohammad Mashud. et al. Khulna University of Engineering and
Technology, Khulna- 9203, Bangladesh. (CERIE-167)
The effect of CNT waviness on tensile elastic modulus of carbon nanotube based
composites using finite element method.
Israt Jahan Chowdhury. et al. BUET, Dhaka, Bangladesh. (CERIE-282)
1:10-2:00
LUNCH BREAK
20
DAY 2, 12/01/’11.
MECHANICAL & INDUSTRIAL ENGINEERING SESSION
Chair: Dr. Mosharaf Hossain, Head, Dept. of Industrial and Production Engineering, Rajshahi, University of
Engineering and Technology, Rajshahi- 6204, Bangladesh
Session Time Title Location
ME
CH
AN
ICA
L a
nd
IN
DU
ST
RIA
L E
NG
INE
ER
ING
2:00-2:20 Production scheduling in a garments manufacturing company: a case study, Md.
Mohibul Islam. et al. Comfit Composite Knit Limited, Tangail, Bangladesh,
Department of Industrial & Production Engineering, Rajshahi University of
Engineering & Technology, Rajshahi-6204, Bangladesh. (CERIE-175)
LIB
RA
RY
BU
ILD
ING
(G
RO
UN
D F
LO
OR
) R
OO
M :
PG
D-2
2:20-2:40
Ergonomics and the prevention of musculo-skeletal strain and back injuries,
Muhammad Abdus Samad. et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-103)
2:40-3:00
Redesigning cycle rickshaw wheel to minimize accidentprobability and severity,
Khairun Nahar. et al. Otobi Ltd, Gulshan 1, Dhaka 1212, Bangladesh and Department
of Industrial and Production Engineering, Rajshahi University of Engineering &
Technology, Rajshahi 6204, Bangladesh. (CERIE-176)
3:00-3:20
Airfoil stall suppression by use of a bubble burst control plate, Md. Shariful Islam. et
al. Khulna University of Engineering and Technology, Khulna- 9203, Bangladesh.
(CERIE-166)
3:20-3:40 BREAK
3:40-4:00
Application of lean manufacturing tools for performance analysis: a case study with a
focus on sewing section of a selected garments factory, Rubayet Karim. et al. Jessore
Science & Technology University. (CERIE-149)
4:00-4:20
Mathematical model for melting rate in electric arc welding using regression analysis,
A.K.M. Nazrul Islam. et al. BUET, Dhaka, Bangladesh. (CERIE-165)
4:20-4:40
Application of fixed time period model for optimizing inventory level: a case study in
a pharmaceutical company, Mohammed Mahfuz Hossain. et al. SUST, Sylhet- 3114,
Bangladesh. (CERIE-250)
4:40-5:00 Fabrication and performance test of a room air conditioning system with solar
collector a new approach, M. J. Jabbar. et al. BUET, Dhaka, Bangladesh. (CERIE-
102)
21
PROGRAM SCHEDULE –DAY 2; 12/01/’11
ELECTRONICS and COMMUNNICATION ENGINEERING SESSION
CHAIR: Prof. Dr. Shumsun Naher Bagum, Dept. of Physics, SUST, Sylhet, Bangladesh.
Session Time Title Venue
EL
EC
TR
ON
ICS
& C
OM
MU
NIC
AT
ION
EN
GIN
EE
RIN
G.
9:00-9:30 Designing of armature winding using programming technique instead of conventional
method, Abu Naim Rakib Ahmed et al. Khulna University of Engineering and
Technology, Khulna Bangladesh. (CERIE-267)
AC
AD
EM
IC B
UIL
DIN
G “
E".
R
oo
m N
o.
“12
3”.
9:30-9:50 VLSI Design of an ultra-low-power functional chip using mirror-amplifier for
precision sensor applications, Shuza Binzaid et al. University of Information
Technology & Sciences, Dhaka, Bangladesh. (CERIE-297)
9:50-10:10 Intersubband absorption characterization of GAN/ALN based multi quantum well
heterostructures grown on gan template by molecular beam epitaxy using FTIR
spectroscopy, Md. Arefin Taslim et al.Daffodil International University. (CERIE-278)
10:10-10:30 FOPA, the Ultimate Competent of Next Generation Optical Amplification, Md. Taslim
Arefin et al. Daffodil International University, Dhaka, Bangladesh. (CERIE-279)
10:30-10:50 PAPR Reduction Technique for 3GPP LTE OFDMA System,
D.M. Motiur Rahaman et al. Rajshahi University of Engineering and Technology.
(CERIE-281)
10.50-11.10 Experimental analysis on wireless energy transfer via strongly coupled magnetic
resonances, Shamendu Roy Rohi et al. American International University-Bangladesh.
(CERIE-292)
11:10-11:30
BREAK
11:30-11:50
Design of VLSI Pad frame towards low power i/o architecture with an efficient floor
planning, Rumana Amin et al. University of Information Technology & Sciences,
Dhaka, Bangladesh. (CERIE-296)
11:50-12:10
Bi-edf-based optical amplification and multiwavelength laser, Zinnat Ara Islam et al,
Department of Electrical Engineering, University of Malaya, Malaysia. (CERIE-197)
12:10-12:30
Unified power quality conditioner (upqc): development of hardware using facts
technology, P.K. Shadhu Khan et al. Chittagong University of Engineering and
Technology. (CERIE-265)
12:30-12:50
Reduction of PAPR in OFDM Using SLM for Different Route Number, Md. Zulfiker
Mahmud, CSE, Green University of Bangladesh. (CERIE-320)
12:50-1:10
A Feasibility Study on Performance of 3G Networks in Urban Areas of Bangladesh,
Mohammad Mirza Golam Rashed, Department of Electronics and Telecommunication
Engineering, Daffodil International University, 102-Mirpur Road, Shukrabad Dhaka.
(CERIE-361)
1:10-2:00
LUNCH BREAK
22
PROGRAM SCHEDULE –DAY 2; 12/01/’11
ELECTRONICS and COMMUNNICATION ENGINEERING SESSION
CHAIR: Prof. Dr. Md. Sujaul Haque Chowdhury, Dept. of Physics, SUST, Sylhet- 3114,
Bangladesh
EL
EC
TR
ON
ICS
& C
OM
MU
NIC
AT
ION
EN
GIN
EE
RIN
G.
2:00-2:20 Prospect of grid connected solar PV power plant in Bangladesh,
Md.Walee Zaman et al. BUET, Dhaka, Bangladesh. (CERIE-270)
AC
AD
EM
IC B
UIL
DIN
G “
E".
R
oo
m N
o.
“12
3”.
2:20-2:40
A comparative study of electrical, hall effect and magnetic properties of co thin films
deposited on GaAs(001), Si(001) and glass substrates, N. A. Shafi et al. Sar securities
ltd, Motijheel, Dhaka. (CERIE-300)
2:40-3:00
Unified power quality conditioner (upqc): development of hardware using facts
technology, P.K. Shadhu Khan et al. Chittagong University of Engineering and
Technology. (CERIE-265)
3:00-3:20
Design and implementation of a microcontroller based elevator control systems,
Muhibul Haque Bhuyan et al., Daffodil International University, Dhaka, Bangladesh.
(CERIE-293)
3:20-3:40 BREAK
3:40-4:00
Microcontroller based automatic liquid level control modeling,
Shakil Seeraji et al. Green University of Bangladesh, Dhaka. (CERIE-268)
4:00-4:20
Design and manufacturing of a low cost synchronous motor-generator for electrical
machine laboratory, Muhibul Haque Bhuyan et al. Daffodil international university,
Dhaka, Bangladesh. (CERIE-290)
4:20-4:40
Electrical, hall effect and optical properties of undoped cobalt thin films, N. A. Shafi et
al. Sar securities ltd, Motijheel, Dhaka. (CERIE-301)
PROGRAM SCHEDULE –DAY 3; 13/01/’11
ELECTRONICS and COMMUNNICATION ENGINEERING SESSION
CHAIR: Dr. Wasim Bari, Dept. of Computer Science and Engineering, Leading University, Sylhet
Session Time Title Venue
EL
EC
TR
ON
ICS
& C
OM
MU
NIC
AT
ION
EN
GIN
EE
RIN
G.
9:00-9:30 Modified intra_4x4 prediction scheme for h.264 video coding.
Md. Salauddin Yusuf, Department of EEE, Khulna University of Engineering &
Technology Khulna-9203, Bangladesh. (CERIE-419)
AC
AD
EM
IC B
UIL
DIN
G “
E"
Ro
om
No
. “1
23
”.
9:30-9:50 Design and Simulation of a Multi-Language Digital Clock by Switching System.
R. R. Mahmud. et al. Ahsanullah University of Science and Technology. (CERIE-196)
9:50-10:10 Linearization of voltage-controlled oscillator by microcontroller based PLL frequency
synthesizer. Md. Lutfor Rahman et al. Daffodil international university. (CERIE-
258) 10:10-
10:30
Design, Simulation and Performance Analysis of High Voltage Multistage Pulse
Forming Network. M. Shahed et al. Dept. of EEE, Ahsanullah University of Science
and Technology (AUST), Bangladesh. (CERIE-372)
10:30-
10:50
Design of alas/gaas/ge lattice matched multijunction solar cells.
Md. Jahirul Islam et al. Khulna University of Engineering and Technology. (CERIE-
365)
10:50-
11:10 BREAK
11:10-
11:30
Microcontroller based digital voltmeter design, Tahsin Fahima Orchi. et al. Ahsanullah
University of Science and Technology, Dhaka. (CERIE-171)
11:30-
11:50
Design and implementation of a remote sensing electricity supply control for industrial
applications, Muhibul Haque Bhuyan et al. Daffodil international university. (CERIE-
291)
11:50-
12:10
Structural properties and temperature dependence of resistivity of pure co material
deposited Co/Si(001) and co/glass thin films. N.A. Shafi et al. Sar securities ltd,
Motijheel, Dhaka. (CERIE-302)
12:10-
12:30
MobiLOAN: a mobile payment based microfinance technology to improve rural
microfinance service delivery and optimize the operational cost
Mohammad Sajidur Rahman et al. BUET, Dhaka, Bangladesh. (CERIE-321)
23
PROGRAM SCHEDULE –DAY 2; 12/01/’11
ELECTRONICS and ELECTRICAL ENGINEERING SESSION
CHAIR: Prof. Dr. Abdul Hannan, Dept. Of Physics, SUST, Sylhet, Bangladesh.
Session Time Title VENUE
EL
EC
TR
ON
ICS
an
d
EL
EC
TR
ICA
L E
NG
INE
ER
ING
9:00-9:30 Red light violation monitoring and reporting using microcontroller controlled wireless
communication, Tanvir Hassan Bhuiyan et al. Chittagong University of Engineering
and Technology, Chittagong, Bangladesh. (CERIE-341)
AC
AD
EM
IC B
UIL
DIN
: “E
”.
RO
OM
NO
. -
“1
24
”.
9:30-9:50 Design and implementation of a microcontroller based liquid level control system, M.
S. Hossain, et al. Rajshahi University of Engineering and Technology. (CERIE-185)
9:50-10:10 PC Based Incubator for Hatching Eggs Using Fuzzy Logic Controller, M. S. U.
Zaman.et al. Rajshahi University of Engineering and Technology. (CERIE-187)
10:10-
10:30
Smart room control unit using standard rc5 remote code,
Md. Ismail Hossain. et al.. International Islamic University, Gazipur, Bangladesh.
(CERIE-188)
10:30-
10:50
Solar Concentrator Technology for rural Bangladesh, Kazi Wohiduzzaman, et al.
Metropolitan University, Sylhet, Bangladesh. (CERIE-194)
10:50-
11:10
A CMOS IC Using Nano-Power Electronic Circuits for Life-Saving Applications in
Bangladesh, Shuza Binzaid et al. University of Information Technology and Sciences,
Dhaka, Bangladesh. (CERIE-195) 11:10-11:30 BREAK
11:30-
11:50
Simulation of pulse forming system, Sajal Kumar Das et al. Rajshahi University of
Engineering and Technology. (CERIE-200)
11:50-
12:10
Implementation of artificial intelligence in embedded System for automatic voltage
regulato, Shakil Ahamed Khan et al. Dhaka International University. (CERIE-121)
12:10-
12:30
Steady state analysis of a CSI-FED induction motor, drive with field orientation
control, Md. Jahirul Islam et al. Khulna University of Engineering and Technology.
(CERIE-150)
12:30-
12:50
A recurrent neural network based back EMF estimator for position sensorless control
of IPM synchronous motor drive, Kalyan Kumar Halder et al. Khulna University of
Engineering and Technology. (CERIE-156)
12:50-1:10
Recurrent neural network based cost effective four switch three phase inverter fed
synchronous reluctance motor drive, Kalyan Kumar Halder.et al. Khulna University of
Engineering and Technology. (CERIE-157)
1:10-2:00 LUNCH BREAK
Chair: Engr. Syed Faruque Ahammed, Principal, Sylhet Engineering College, Sylhet
Session Time Title Venue
EL
EC
TR
ON
ICS
an
d
EL
EC
TR
ICA
L E
NG
INE
ER
ING
2:00-2:20 PAPR Reduction Technique for 3GPP LTE OFDMA System, D.M. Motiur Rahaman,
Rajshahi University of Engineering & Technology, Bangladesh. (CERIE-281) A
CA
DE
MIC
BU
ILD
IN:
“E”.
RO
OM
NO
. -
“1
24
”.
2:20-2:40 A new method of medical image enhancement based on nonsubsampled contourlet
transforms, Md. Foisal Hossain. et al. Osaka Prefecture University, Japan. (CERIE-
173)
2:40-3:00 20 kW Grid connected solar power station: monitoring and assessment, Md. Abu
Ruhul Kuddus et al. BUET, Dhaka, Bangladesh. (CERIE-179)
3:00-3:20 Smart room: an intelligent and energy conserving living Environment,
Md. Emran Chowdhury. et al. Northern University, Bangladesh. (CERIE-192)
3:20-3:40 BREAK
3:40-4:00 Charge control studies in INXGA1-XN/INN/ INXGA1-XN-BASED double channel
high electron mobility transistors (DHEMTS), Md. Rejvi kaysir et al. Khulna
University of Engineering and Technology, Khulna, Bangladesh. (CERIE-379)
4:00-4:20
Growth and characterization of MOVPE INXGA1-XN (X ~ 0.4) , Md Rafiqul islam1
et al. Khulna University of Engineering and Technology, Khulna, Bangladesh.
(CERIE-380)
4:20-4:40
Design and implementation of a plc based screw air compressor for industrial
applications, Poresh kanti das et al. Daffodil international university. (CERIE-383)
4:20-4:40
Implementation of PID control and PWM technique in embedded system for ripple
free and stabilized Sine wave inverter, Md. Ismail Hossain et al. International Islamic
University Chittagong. (CERIE-224)
24
PROGRAM SCHEDULE- DAY 2; 12/01/’11.
MATERIALS, WATER RESOURCE & ENVIRONMENTAL ENGINEERING SESSION
CHAIR: Dr. G. M. Jahid Hasan, Dept. of Civil and Environmental Engineering, SUST, Sylhet, Bangladesh.
Session Time Title Venue
MA
TE
RIA
LS
, W
AT
ER
RE
SO
UR
CE
an
d E
NV
IRO
NM
EN
TA
L E
NG
INE
ER
ING
9:00-9:30 Study on cover properties and repair methods based on lcc estimation of rc
infrastructure, Md. Shafiqul ISLAM et al, Department of Civil Engineering, The
University of Tokyo, Japan. (CERIE-285)
LIB
RA
RY
BU
ILD
ING
(G
RO
UN
D F
LO
OR
) R
OO
M :
PG
D-1
9:30-9:50 Simulation of the breakthrough curve for the removal of methylene blue from waste
water by activated carbon of bombax ceiba, Ahmad Hasan Nury et al. SUST, Sylhet-
3114, Bangladesh. (CERIE-410)
9:50-10:10 Stabilization and assessment of diffuse heavy metal pollutants in incinerated medical
waste, Md. Imran Kabir et al, SUST, Sylhet- 3114, Bangladesh (CERIE-310)
10:10-10:30 Selection of potential strain for the production of citric acid by solid state
bioconversion using oil palm empty fruit bunches. Md. Niamul Bari et al. Rajshahi
University of Engineering and Technology, Rajshahi- 6204, Bangladesh. (CERIE-
287)
10:30-10:50 Responses of bara nuniya (portulaca oleracea l.) and sorghum (sorghum bicolor l.) at
elevated concentrations of arsenic, Molla Rahman Shaibur et al. Jessore Science &
Technology University. (CERIE-286)
10:50-11:10 Vulnerability analysis of Bangladesh due to multiple natural hazards using gis
technique. Dr. Md. Monirul Islam et al. IUBAT- International University of Business
Agriculture and Technology, Dhaka, Bangladesh
(CERIE-276)
11:10-11:30 BREAK
11:30-11:50
Comparative study of hazards by floods and cyclone in Bangladesh. S. Islam et
al. IUBAT- International University of Business Agriculture and Technology, Dhaka,
Bangladesh. (CERIE-272)
11:50-12:10
Prediction of future temperature in north-eastern region of Bangladesh by using
historical data, M. Ahmed et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-271)
12:10-12:30
Technical and economic evaluation of water filtration system by using local
ingredients, A. I. H. Laskar et al. SUST Sylhet, Bangladesh. (CERIE-404)
12:30-12:50
Evaluation of optimum set of air pollution (PM10) control measure to attain
environmental standard of Dhaka city with minimized cost: comparison of the cost
with health damage, Md. S, Sheikh et al. Engineering division, Bangladesh Atomic
Energy Commission, Bangladesh. (CERIE-251)
1:00-2:00 LUNCH BREAK
25
PROGRAM SCHEDULE- DAY 2; 12/01/’11.
MATERIALS, WATER RESOURCE & ENVIRONMENTAL ENGINEERING SESSION
CHAIR: Dr. Mushtaq Ahmed, Dept. of Civil and Environmental Engineering, SUST, Sylhet, Bangladesh.
Session Time Title Venue
MA
TE
RIA
LS
, W
AT
ER
RE
SO
UR
CE
&
EN
VIR
ON
ME
NT
AL
EN
GIN
EE
RIN
G
2:00-2:20
Resource recovery from water treatment sludge. Md. Ikbal Mahmud et al. SUST,
Sylhet, Bangladesh. (CERIE-425)
LIB
RA
RY
BU
ILD
ING
(G
RO
UN
D F
LO
OR
) R
OO
M :
PG
D-1
2:20-2:40 Heavy metal removal by grafted acrylic acid for the water coming from abandoned
mines. Md. Imran Kabir et al. SUST, Sylhet- 3114, Bangladesh. (CERIE-413)
2:40-3:00 Mediator based architecture to address data heterogeneity.
Md. Hasan Hafizur Rahman et al. BGC Trust University, Bangladesh. (CERIE-323)
3:00-3:20 Design a simple data structure using multilevel stack. Sonia Afrin et al. Dhaka
International University, Bangladesh. (CERIE-326)
3:20-3:40 Masonry buildings assessment in heritage areas: a case study for the older part of
Dhaka city, Ram Krishna Mazumder et al, BUET, Dhaka. (CERIE-317)
3:40-4:10 Impact on sustainability of Hail Haor By Integrated Water Management Activities,
Md. Misbah Uddin et al. SUST, Sylhet-3114, Bangladesh. (CERIE-434)
Importance And Scope of Conservation Of Wetland To Protect Environmental
Degradation, Md. Misbah Uddin et al., SUST, Sylhet-3114, Bangladesh. (CERIE-435)
4:10-4:30 Solidification of Solid Waste: Two case studies, H.M.A.Mahzuz et al. SUST, Sylhet,
Bangladesh. (CERIE -124)
4:30-4:50 Domestic Water Consumption Patterns in a Rural Village in Bangladesh, Md. Al
Amin, Civil & Environmental Engineering Department, Islamic University of
Technology (IUT), Gazipur-1704, Bangladesh. (CERIE-332)
4:50-5:10 Stress-strain characteristics of flexible pavement using finite element analysis, Md.
Tahmidur Rahman1, Department of Civil and Environmental Engineering, Islamic
University of Technology (IUT), Gazipur - 1704, Bangladesh. (CERIE-342)
PROGRAM SCHEDULE- DAY 3; 13/01/’11.
ENVIRONMENTAL ENGINEERING SESSION
CHAIR: Dr. Narayan Saha, Dept. of Forestry and Environmental Science, SUST, Sylhet, Bangladesh.
Session Time Title Venue
MA
TE
RIA
LS
, W
AT
ER
RE
SO
UR
CE
an
d
EN
VIR
ON
ME
NT
AL
EN
GIN
EE
RIN
G
9:00-9:30 Development of a Household Compost Generation System with Organic Household
Waste, Rabeya Mariam, et al, Department of Environmental Sciences, Jahangirnagar
University, Savar, Bangladesh, Department of Industrial and Production Engineering,
BUET, Dhaka, Bangladesh (CERIE-445)
LIB
RA
RY
BU
ILD
ING
(G
RO
UN
D F
LO
OR
)
RO
OM
: P
GD
-1
9:30-9:50 Earthquake vulnerability assessment for important structure (school and colleges) of
north eastern region of Bangladesh, K.M.Khaleduzzaman, Department of Civil &
Environmental Engineering, SUST, Sylhet. (CERIE-344)
9:50-10:10 Wave propagation characteristics of infilled soil, Emtazul Haque, Department of Civil
Engineering, The University of Asia Pacific, Dhaka; Department of Civil Engineering,
BUET, Dhaka . (CERIE-346)
10:10-
10:30
Fire Hazard Scenario in Chittagong: A Case Study, Md. Tahmidur Rahman1,
Department of Civil and Environmental Engineering, Islamic University of
Technology (IUT), Gazipur - 1704, Bangladesh. (CERIE-343)
26
DAY 3, 13/01/’11.
CHEMICAL & PETROLIUM ENGINEERING SESSION
CHAIR: Prof. Dr. Md. Akhtarul Islam, Dept. of Chemical Engineering and Polymer Science, SUST, Sylhet- 3114,
Bangladesh
Session Time Title Venue
CH
EM
ICA
L &
PE
TR
OL
IUM
EN
GIN
EE
RIN
G
9:00-9:30 Investigation of dissimilar behavior of Ag (poly) and GC-Rh (poly) electrodes towards
the Nitrate (NO3-) reduction, M. Saiful Alam et al. SUST, Sylhet, Bangladesh.
(CERIE-100)
AC
AD
EM
IC B
UIL
DIN
G-
“B";
Ro
om
No
.:“1
11
”
9:30-9:50
Photocatalytic degradation of reactive dye in batch and continuous modes, M. Mohibul
Alam et al. SUST, Sylhet, Bangladesh. (CERIE-418)
9:50-10:10 Gas well deliverability test at Hobigonj gas field. Md. Ismail Hossain et al. SUST,
Sylhet, Bangladesh. (CERIE-382)
10:10-10:30 Recovery of chromium from tannery effluent, Hazzaz –Bin– Yousuf et al. SUST,
Sylhet, Bangladesh. (CERIE-384)
10:30-10:50 Extraction of ferromagnetic material from non-homogeneous solid-solid Mixture, M.F.
Ismail et al. BUET, Dhaka, Bangladesh. (CERIE-388)
10:50-11:10 BREAK
CHAIR: Prof. Dr. Saiful Islam, Dept. of Chemistry and Dept. of Biochemistry, SUST, Sylhet,
Bangladesh.
11:10-11:30 Cooperative study of biodiesel preparation methods, Kaniz Ferdous et al. SUST,
Sylhet- 3114, Bangladesh. (CERIE-395)
11:30-11:50
Natural gas pipe line design from ASHUGONJ valve station#3 to ZIA fertilizer
company limited and in an arbitrary power plant, Md.Towhidul Islam et al. SUST,
Sylhet, Bangladesh. (CERIE-392)
11:50-12:10
Reservoir characterization using geostatistical method, Bakhtiar Ahmed et al. SUST,
Sylhet, Bangladesh. (CERIE-393)
12:10-12:30
Preparation of biodiesel from waste cooks oil by using three step methods, Kaniz
Ferdous et al. SUST, Sylhet, Bangladesh. (CERIE-394)
12:30-12:50
Photocatalytic activities of TiO2 nanoparticles synthesized using solgel method
with presence of nanoporous polystyrene, Sharmin Rahman Snigdha et al. SUST,
Sylhet, Bangladesh. (CERIE-306)
12:50-1:10 Biosorption of Congo-Red dye on Azadirachta indica Leaf Powder,
Md.Rezaul Karim et al. SUST, Sylhet, Bangladesh. (CERIE-391)
27
DAY 3, 13/01/’11
CHEMICAL & PETROLIUM ENGINEERING SESSION
CHAIR: Prof. Dr. Ashraful Alam, Dept. of Chemistry, SUST, Sylhet, Bangladesh.
Session Time Title Venue
CH
EM
ICA
L &
PE
TR
OL
IUM
EN
GIN
EE
RIN
G
9:00-9:30 Dr. M. Jasim Uddin, Associate Professor, Dept. of Chemical Engineering and Polymer
Science, SUST, Sylhet- 3114, Bangladesh.
“Self Cleaning Textiles: A Nanotechnology Approach”
AC
AD
EM
IC B
UIL
DIN
G-
“B";
RO
OM
NO
.:“1
13
”
9:30-9:50 Effect of pretreatment on waste tea leaves reinforced polyethylene compositesm. M.
Hassan et al. M C College, National University, Sylhet-3100, Bangladesh. (CERIE-
209)
9:50-10:10 A study on physical and thermal properties of jute and jute blended yarn. Md. Abdus
Shahidet al. Dhaka University of Engineering and Technology, Gazipur, Bangladesh.
(CERIE-295)
10:10-10:30 Effect of pretreatment with uv radiation on physico-mechanical properties of 1, 6
hexanediol diacrylate (HDDA) grafted banana fiber, N. K. Roy et al. M C College,
National University, Sylhet-3100, Bangladesh. (CERIE-212)
10:30-10:50
BREAK
CHAIR: Engr. Salma Akhter, Dept. of Chemical Engineering and Polymer Science, SUST,
Sylhet 3114, Bangladesh
10:50-11:10 Growth-promotion of tea plants with depolymerized alginates using gamma radiation.
M. A. Hossain et al., M.C.College, National University, Sylhet-3100, Bangladesh.
(CERIE-211)
11:10-11:30 Factorial analysis of lipid extraction from dried wastewater sludge for the production
of biodiesel. Muhammad N Siddiquee et al. The University of Western Ontario 1151
Richmond Street North, London, Canada (CERIE-412)
11:30-11:50
Explanatory study on mechanical performance of betel nut (areca catechu) fiber
polypropylene composite: effect of detergent treatment, J. Chakrabarty et al. M C
College, National University, Sylhet-3100, Bangladesh. (CERIE-213)
11:50-12:10
Characterization of in situ stresses, tensional strength factor, and horizontal
displacement around the open-pit excavation of the Phulbari coal basin and associated
problem with regional hydrogeology of NW Bangladesh, Dr. Md. Rafiqul
Islam,SUST. (CERIE-298)
12:10-12:30 Clinical waste management in Sylhet city, Husne Ara Moriom et al. SUST, Sylhet-
3114, Bangladesh. (CERIE-424)
12:30-12:50 Double chamber microbial fuel cell (mfc) for electricity generation, Kallol Talukdar et
al. SUST, Sylhet, Bangladesh. (CERIE-439)
12:50-1:10 Permeability Estimation of Habiganj Gas Field from Well Logs, Md. Zayed Bin Sultan
et al. SUST, Sylhet-3114, Bangladesh. (CERIE-340)
28
DAY 3, 13/01/’11.
CIVIL ENGINEERING and ARCHITECTURE SESSION
CHAIR: Mr. Mainuddin Ahmed, Director, House and Building Resource Institute, Mirpur Dhaka- 1216.
Session Time
Title Location
CIV
IL E
NG
INE
ER
ING
an
d A
RC
HIT
EC
TU
RE
9:00-9:30 Construction Management of a High-rise Building with Special Focus on Economic
Aspects, M. S. Islam et al, Department of Civil and Environmental Engineering,
SUST,. (CERIE-304)
AC
AD
EM
IC B
UIL
DIN
G “
C”
RO
OM
NO
. “1
17
”
9:30-9:50 Integrating Physical Planning In Street Crime Prevention in Khulna City: A Study on
Khulna Thana, Muhammad Rashidul Hasan, Department of Urban & Regional
Planning Chittagong University of Engineering & Technology (CUET), Chittagong,
Bangladesh. (CERIE-329)
9:50-10:10 Municipal Wastewater Treatment and Heavy Metal Removal by Constructed
Wetlands, Christopher Blazo. BUET, Dhaka, Bangladesh. (CERIE-242)
10:10-10:30 A study of soil structure interaction effects of a tall building on mat foundation
subjected to lateral loads, Mohammad Abdullah Nur, World University of
Bangladesh. (CERIE-257)
10:30-10:50 Seismic risk analysis for the schools of Sylhet city, Bangladesh,
Ram Krishna Mazumder at al. SUST, Sylhet, Bangladesh. (CERIE-275)
10:50-11:10
BREAK
11:10-11:30 Size effect of HPC under impact loading, A.S.M.Z. Hasan at al. Rajshahi University
of Engineering & Technology, Rajshahi, Bangladesh. (CERIE-283)
11:30-11:50
Non-structural mitigation for earthquake risk prone school in Sylhet, Dhaka And
Netrakona, Ram Krishna Mazumder at al. BUET, Dhaka, Bangladesh. (CERIE-284)
11:50-12:10
Building Construction Quality and Safety: A Case Study on Sylhet City, M. S. Islam
et al, Department of Civil and Environmental Engineering, SUST, (CERIE-305)
12:10-12:30 Renewable energy systems in residential buildings for new satellite towns of Dhaka:
barriers and probable solutions. Md. Mostafizur Rahman, SUST, Sylhet,
Bangladesh. (CERIE-367)
12:30-12:50 Triangular reinforced concrete beam: Effectives Evaluation, H.M.A.Mahzuz et al.
SUST, Sylhet, Bangladesh. (CERIE -125)
12:50-13:10 Numerical Investigation of Behavior of Retrofitted Flexural Cracked Beam with
Plate Bonding Technique, A. B. M. Amrul Kaish, Housing & Building Research
Institute, Bangladesh, (CERIE-186)
29
DAY 3, 13/01/’11.
MECHANICAL & INDUSTRIAL ENGINEERING SESSION
Chair: Prof. Sadrul Islam, Dept. of Mechanical and Chemical Engineering, IUT, Gazipur, Bangladesh.
session time Title location
ME
CH
AN
ICA
L a
nd
IN
DU
ST
RIA
L E
NG
INE
ER
ING
9:00-9:30 Keynote Speaker: Prof. Sadrul Islam, Dept. of Mechanical and chemical
Engineering, IUT, Gazipur, Bangladesh.
LIB
RA
RY
BU
ILD
ING
(G
RO
UN
D F
LO
OR
) R
OO
M :
PG
D-2
9:30-9:50 Design and construction of a simple viscometer for incompressible fluid and
performance study, Mohammad Uzzal Hossain Joardder. Et al. Rajshahi University
of Engineering and Technology, Rajshahi- 6204, Bangladesh. (CERIE-403).
9:50-10:10 Supply chain performance measurement using QFD: a case study in garments
accessories industries of Bangladesh, Md Ashrafuzzaman et al. SUST, Sylhet,
Bangladesh. (CERIE-128).
10:10-10:30 Change over time reduction in garments industry through smed methodology, Md.
Mijanur Rahman et al. Masco Industries Ltd, Bangladesh. (CERIE-110).
10:30-10:50 Design, fabrication & performance test of closed loop auto-control two axis solar
tracker, A. Mahmudul Hasan. et al. Rajshahi University of Engineering and
Technology, Rajshahi- 6204, Bangladesh. (CERIE-303)
10:50-11:10 BREAK
11:10-11:30 Effect of fuel type and EGR on emissions of a diesel engine at idling, Dr. Murari
Mohon Roy. et al. Rajshahi University of Engineering and Technology, Rajshahi-
6204, Bangladesh. (CERIE-92)
11:30-11:50
Development of simulation software for designing duct of air conditioning system,
Mohammad Rezwan Sheikh. et al. Khulna University of Engineering and
Technology, Khulna- 9203, Bangladesh. (CERIE-131)
11:50-12:10
Design, construction and performance test of a vortex tube cooling system
constructed by locally available materials, Mohammad Mahmudur Rahman. et al.
Khulna University of Engineering and Technology, Khulna- 9203, Bangladesh.
(CERIE-132)
12:10-12:30
Design, construction and testing of an earth tube heat exchanger (ETHE),
Md. Fahad Hossain. et al. Khulna University of Engineering and Technology,
Khulna- 9203, Bangladesh. (CERIE-133)
30
DAY 3, 13/01/’11: SCIENCE & ENGINEERING
Chair: Professor Dr. Sabina Islam, Department of Statistics, SUST, Sylhet-3114, Bangladesh.
Session Time Title Venue
SC
IEN
CE
& E
NG
INE
ER
ING
9:00-9:30 Entrepreneurial Management: An International Study
Dr. Mohammad Abul Hasan, Additional District Commissioner, Sylhet, Bangladesh.
(CERIE-427)
AC
AD
EM
IC B
UIL
DIN
G “
E"
RO
OM
NO
. “3
25
”
9:30-9:50 Problems and prospects of special economic zone in Sylhet. Khondoker Rezwan
Tanvir, SUST, Sylhet, Bangladesh. (CERIE-222)
9:50-10:10 Food insecurity and coping strategy in Sunamgonj haor areas: status and
determinants. Mirza Nazmul Hasan, SUST, Sylhet, Bangladesh. (CERIE-423)
10:10-10:30 Analysis of spatial heterogeneity using power law. Tamanna Islam,
Iwate
University, Japan. (CERIE-205)
10:50-11:10 BREAK
11:10-11:30 Prospects of industrialization in Bangladesh: an empirical study in the southern
region. A.M.M. Nazmul Ahsan et al. Khulna University of Engineering and
Technology, Khulna- 9203, Bangladesh. (CERIE-256)
11:30-11:50
Possibilities of industrialization-Bangladesh Perspective. Kazi Arif-Uz-Zaman et al.
Khulna University of Engineering and Technology, Khulna- 9203, Bangladesh.
(CERIE-254)
11:50-12:10
Active Flow Separation Control of an Airfoil. Md. Hasan Ali. et al. Khulna
University of Engineering and Technology, Khulna- 9203, Bangladesh. (CERIE-
168)
12:10-12:30 Prepaid Gas Measuring Concept Using GSM Networks Services.
Syed Abu Nahian, Et al. CUET, Chittagong. (CERIE-238)
12:30-12:50 Recent Development in the Semiconductor Technology of Graphene
Z.M. Hasib et al. BUET, Dhaka, Bangladesh. (CERIE-160)
12:50-1:10
Solve Boundary value problem of Shooting and Finite difference method Using
MATLAB. Sheikh Md. Rabiul Islam et al. Khulna University of Engineering and
Technology, Khulna- 9203, Bangladesh. (CERIE-83)
DAY 3; 13/01/’11
ELECTRONICS and COMMUNNICATION ENGINEERING SESSION
CHAIR: Dr. Wasim Bari, Dept. of Computer Science and Engineering, Leading University, Sylhet
Session Time Title Venue
EL
EC
TR
ON
ICS
& C
OM
MU
NIC
AT
ION
EN
GIN
EE
RIN
G.
9:00-9:30 Modified intra_4x4 prediction scheme for h.264 video coding. Md. Salauddin Yusuf, Dept of EEE, KUET, Khulna-9203, Bangladesh. (CERIE-419)
AC
AD
EM
IC B
UIL
DIN
G “
E"
Ro
om
No
. “1
23
”.
9:30-9:50 Design and Simulation of a Multi-Language Digital Clock by Switching System.
R. R. Mahmud. et al. Ahsanullah University of Science and Technology. (CERIE-
196)
9:50-10:10 Linearization of voltage-controlled oscillator by microcontroller based PLL
frequency synthesizer. Md. Lutfor Rahman et al. Daffodil international university.
(CERIE-258)
10:10-10:30 Increasing Efficiency of Photovoltaic Polycrystalline Panels, Shuza Binzaid et al.
University of Information Technology and Science, Dhaka. (CERIE-198)
10:30-10:50 Design of alas/gaas/ge lattice matched multijunction solar cells.
Md. Jahirul Islam et al. KUET, Khulna. (CERIE-365)
10:50-11:10 BREAK
11:10-11:30 Microcontroller based digital voltmeter design, Tahsin Fahima Orchi. et al.
Ahsanullah University of Science and Tecnology, Dhaka. (CERIE-171)
11:30-11:50
Design and implementation of a remote sensing electricity supply control for
industrial applications, Muhibul Haque Bhuyan et al. Daffodil international
university. (CERIE-291)
11:50-12:10
Structural properties and temperature dependence of resistivity of pure co material
deposited co/si(001) and co/glass thin films. N.A. Shafi et al. Sar securities ltd,
Motijheel, Dhaka. (CERIE-302)
12:10-12:30 MobiLOAN: a mobile payment based microfinance technology to improve rural
microfinance service delivery and optimize the operational cost
Mohammad Sajidur Rahman et al. BUET, Dhaka, Bangladesh. (CERIE-321)
31
PROGRAM SCHEDULE –DAY 3; 13/01/’11
ELECTRONICS and ELECTRICAL ENGINEERING SESSION
CHAIR: Prof. P.K. Shadhu Khan, Chittagong University of Engineering and Technology, Chittagong- 4349, Bangladesh
Session Time Title Venue
EL
EC
TR
ON
ICS
an
d
EL
EC
TR
ICA
L E
NG
INE
ER
ING
9:00-9:30 Performance analysis of a simple power quality conditioner for mitigation of
harmonics, P.K. Shadhu Khan et al. Chittagong University of Engineering and
Technology, Chittagong- 4349, Bangladesh. (CERIE-366)
AC
AD
EM
IC B
UIL
DIN
G:
“E”.
RO
OM
NO
. -
“1
24
”.
9:30-9:50 Design and implementation of an intellectual security system for the world wide
appearance of owner, R. R. Mahmud et al. Ahsanullah University of Science and
Technology, Dhaka, Bangladesh. (CERIE-226)
9:50-10:10 Design, simulation and implementation of automatic load control with human
counting system of a space, R. R. Mahmud et al. Ahsanullah University of Science
and Technology, Dhaka, Bangladesh. (CERIE-247)
10:10-10:30 Share Market Price Prediction Using Artificial Neural Network (ANN)
Zabir Haider Khan et al. SUST, Sylhet, Bangladesh. (CERIE-229)
10:50-11:10 BREAK
11:10-11:30 Line coding selection for optical fiber communication system in presence of fiber
group velocity dispersion, Md. Habibullah et al. Khulna University of Engineering
and Technology, Khulna- 9203, Bangladesh. (CERIE-259)
11:30-11:50
Vector control of 4-switch 3-phase voltage source inverter fed induction motor
drive, Md. Habibullah, et al. Khulna University of Engineering and Technology,
Khulna- 9203, Bangladesh. (CERIE-261)
11:50-12:10
Simulation of transient and steady state conditions of synchronous machines for
power system, Md. Moshiul alam et al. Rajshahi University of Engineering and
Technology, Rajshahi- 6204, Bangladesh. (CERIE-263)
12:10-12:30 Investigation and demonstration of near end and far end crosstalks in multiconductor
microstrip transmission line, M. Masud Rana et al. Rajshahi University of
Engineering and Technology, Rajshahi- 6204, Bangladesh. (CERIE-264)
12:30-12:50 Variation Of Nonlinear Refractive Index And Nonlinear Absorption Co-Efficient Of
Linb03 Crystal Due To Varying Wavelengths, S. M. G. Rabbani et al. SUST,
Sylhet-3114, Bangladesh. (CERIE-432)
CONFERENCE CLOSING CEREMONY
Date: 13th
January 2011
2:15 PM – 3:30 PM
How to foster the linkage between the engineering education and industrial
requirements?
Venue: Mini Auditorium, SUST,
3:30 PM – 4:30 PM SUST, Campus Visit
4:30 PM – 6:30 PM Cultural Programme
Venue: Mini Auditorium, SUST,
6:30 PM – 7:15 PM Closing Session
7:30 PM From SUST to Upa Shahor, Garden Inn
8:00 PM Gala Dinner
Venue: Garden Inn, Upa Shahor, Sylhet