session session theme paper author(s) paper title
TRANSCRIPT
Session
No. Session Theme Paper Author(s) Paper Title
Presentation
Time
1.1.B
Numerical Modeling
Developments for
Mining Applications
S. Sinha,
G. Walton
Importance of block damage in confined laboratory-scale Bonded
Block Model (BBM) simulations 13:00-13:08
Y. Xue,
K. M. Mohamed
Stability Analysis of Coal Rib with Rock Parting based on the
Strength Reduction of the Coal Mass Model 13:08-13:16
J. Castillo,
C. Cardenas Triana,
Z. Agioutantis
Support Design Using the Ground Reaction Curve and Support
Reaction Curves at Underground Limestone Mines 13:16-13:24
K. Kaklis,
Z. Agioutantis,
G. Moitse1
Pillar stability analysis for partial pillar extraction. A case study at
an underground coal mine in southern Africa 13:24-13:32
J. D. Chieslar A Meshing Technique for Large Scale Modeling of Solution Mines
in Salt and Potash 13:32-13:40
S. Escobar,
D. B. Tulu
Calculating Stone Mine Pillar Concentric Ring Zone Capacities for
Boundary Element Modeling 13:40-13:48
1.1.C
Numerical Modelling
in Geomechanics:
Civil Engineering
Applications
M. Wang,
M. Cai
Simulation of time-dependent deformation of brittle rock pillars
using a grain-based time-to-failure model 13:00-13:08
S. Javankhoshdel,
Y. Abolfazlzadeh,
B. Cami,
T. Yacoub,
T. Ma
3D comparative study of slope stability of open pit mines Multi-
Modal Limit Equilibrium Method; Shear Strength Reduction
method in Finite Element Analysis
13:08-13:16
D. Wu, H. Li, L. Liu,
S. Fu, X. Meng
Fracture Coalescence in Brittle Materials under Uniaxial and
Biaxial Compression: Numerical Investigation via FDEM 13:16-13:24
A. Fakhimi,
P. Asadi
Numerical modeling of effect of specimen size on dynamic tensile
strength of rock 13:24-13:32
A. Javid, M. Imani,
A. Fahimifar;
Interference effect of two nearby strip footings on rock foundation
settlement 13:32-13:40
F. Fei, Y. Sun, L. N.
Wong, J. Choo
Phase-field modeling of mixed-mode fracture in rocks with
discontinuities: From laboratory scale to field scale 13:40-13:48
1.1.D
Open hole wellbore
mechanics & stability
1
C. P. Tan, M. Sayyedi,
B. Wu,
W. Wan Mohd
Zainudin, M. A Razak,
S. Zakaria, T. Nesan,
S. Firns
Fracture Gradient Enhancement Insight from Large-scale
Laboratory Evaluation of Simultaneous Wellbore Strengthening and
Shielding Performance of Drilling Mud Compounds with Real-time
CT Scanning
13:00-13:08
J. Li, Z. Qiu, H. Zhong,
X. Zhao, W. Huang,
Effects of water-based drilling fluid on properties of mud cake and
wellbore stability in fractured formations 13:08-13:16
G. Chen
Z. Na, J. W. Huang,
L. D. Gao
Pipe Sticking Mechanism of Sand Bed by a Transient Two-Layer
Modeling 13:16-13:24
N. V. Dubinya Fluid conductivity of natural shear fractures in vicinity of an
inclined well 13:24-13:32
J. Li, Z. Qiu, H. Zhong,
X. Zhao, W. Huang,
G. Chen
Coupled CFD-DEM simulation of micro-plugging mechanism of
lost circulation in fractured reservoirs 13:32-13:40
Q. Liao, X. Du,
X. Chen, S. Zhao,
P. Gang, Y. You
A new model for predicting the extension limit of horizontal gas
well while drilling under the influence of gas accumulation in
irregular wellbore
13:40-13:48
1.1.E
Unconventional
Geomechanics
Characterization - 1
Y. Han, K. AlRuwaili,
M. Tammar
Numerical Modeling of Pressure Meter Test (PMT) in Deep
Borehole 13:00-13:08
R. Talreja,
J. Zacharia,
S. Bahuguna,
A. Ghosh, G. Lahiri,
S. Chitnis,
V. Rajasekar
Reservoir Characterization of Critically Stressed Fractured Litho-
Units - A New Perspective for Success in Fractured Basement 13:08-13:16
B. Xu, B. Yang
In-Situ Stress Field in the Athabasca Oilsands Deposits and Safety
Factor of Maximum Operation Pressure for Shallow SAGD
Operations
13:16-13:24
P. Mandal, J. Sarout, R.
Rezaee
Viscoelastic approach to capture varying least principal stress
magnitude and the effect of observed stress layering on hydraulic
fracturing- An example from shale formations of the Perth Basin
13:24-13:32
J. Dong, G. Jin,
T. Liu, S. Chen,
K. Qiu, S. Wei
Production-induced Stress in Nonhomogeneous Shale Gas
Reservoirs 13:32-13:40
G. Gallardo-Giozza, D.
Espinoza,
C. Torres-Verdin
Implications of shale anisotropy on the determination of stress
fracture barriers for tectonically passive and active sites 13:40-13:48
1.1.F
Data analysis and
machine learning
applications in
geomechanics
T. Merembayev,
Y. Amanbek,
K. Bekkarnayev
The identification models of the copper recovery using supervised
machine learning algorithms for the geochemical data 13:00-13:08
H. Gamal, A. Gwida, S.
Elkatatny,
A. Abdulraheem,
S. Haidary
Generating the Rock Strength Profile While Drilling Complex
Lithologies in real-time by Employing Artificial Neural Networks 13:08-13:16
J. C. Rom?n Herrera,
M. J. Rodr?guez-Peces
Application of machine learning techniques in problems of binary
classification of seismic-induced landslides 13:16-13:24
A. Sepehrinezhad,
S. Shreedharan,
C. Marone,
P. Shokouhi
Learning from laboratory earthquakes: A transfer learning approach
to active source seismic monitoring 13:24-13:32
H. Lin, F. Zhou,
Y. Tian, X. Yang,
L. Hu, Y. Liu, Z. Pan
Prediction of Rock Constitutive Relation Under High Temperature
and High Stress by Recurrent Neural Network 13:32-13:40
B. Zhou, R. Luo,
N. Li, L. Chen,
X. Zhou, Y. Han,
Y. Jin, Y. Lu
Predicting mineralogy of the salt-gypsum layer by drilling cuttings
and conventional well logging data using a multilayer perceptron
neural network (MLPNN): A case study in Kuqa Depression, Tarim
Basin
13:40-13:48
1.2.B
Numerical Modelling
and Rock Mass
Characterization for
Mining
r. yang A Kinematic Approach for Blast Modeling 14:00-14:08
S. S. Ahmed Initialization of highly heterogeneous stress field in discontinuous
large-scale numerical model 14:08-14:16
F. Cui, Z. Lei, P. Shan,
J. Liu, H. Xu
Evolution and extension of fissures in hard rocks under double-hole
expansion fracturing 14:16-14:24
I. West, G. Walton
The Influence of Heterogeneity of Block Contact Input Parameters
on Model Behavior for Bonded Block Models of Laboratory Rock
Specimens
14:24-14:32
J. D. Chieslar A Compound Constitutive Model for Salt and Potash 14:32-14:40
L. Lorig Breccia Properties Determined by Synthetic Rock Mass Modeling 14:40-14:48
1.2.C
Rock Mass
Characterization and
Geohazards
C. Vipulanandan,
A. Mohammed,
W. Wael Mahmood
Characterizing Rock Properties and Verifying Failure Parameters
Using Data Analytics with Vipulanandan Failure and Correlation
Models
14:00-14:08
M. Ant?n Bayona1,
M. J. Rodr?guez-
Peces1,
J. Yepes2
Geomechanical behavior evolution of the blocks involved in the
Arteara rock avalanche, Gran Canaria, Canary Islands, Spain 14:08-14:16
A. Malsam, G. Walton,
H. Schovanec, D.
Bonneau, P.
DiFrancesco, J.
Hutchinson
An Analysis of Seasonal Rockfall Trends at Floyd Hill: a Slope
Along I-70, East of Idaho Springs, CO 14:16-14:24
F. Vagnon,
C. Colombero,
C. Comina, A. Ferrero,
G. Mandrone,
S. Vinciguerra
Temperature induced damage in carbonate rocks: correlations with
physical properties 14:24-14:32
P. Adhikari, K. Ng,
G. Yrgalem, S. S. Wulff
Improved SPT-based method for axial resistance estimation of steel
H-piles in soft rocks 14:32-14:40
E. J. Lindenbach,
R. G. Bearce
Rock Bearing Capacity: A Probabilistic Approach for Incorporating
Field and Laboratory Data Sets 14:40-14:48
1.2.D
Drilling - Open hole
wellbore mechanics
& stability 2
A. Rodgerson, J. Zhang,
S. Edwards
Dynamic Mud Temperature Prediction Improves Wellbore Stability
Modelling 14:00-14:08
J. Jin, Y. Jin, Y. Lu, H.
Pang
Classification and mechanism analysis of wellbore failure based on
cavings 14:08-14:16
B. Wu1, B. Wu2, K. M.
Ruwaili3, Z. Chen1, A.
Movassagh1, M. J.
Tammar3, R. T. Alfara3
A semi-analytical solution for non-circular boreholes - Implications
for analysing borehole stability and hydraulic fracture initiation 14:16-14:24
R. A. Birchwood1, N.
Rajaiah2, S. K. Subbiah3,
Y. Chen3
Automatic Calibration of Wellbore Stability Models with Hard and
Soft Constraints 14:24-14:32
K. Bo1, Y. Jin1, Y. Lu1,
J. Zhu2, K. Wang
An approach for studying effect of hydration under deep well
drilling conditions on strength properties of mudstone 14:32-14:40
T. Xie1, X. Zhang1, H.
Lin1, P. Dou1, H. Liu1,
W. Liu
A Coupled Thermal-Hydro-Mechanical Model for Wellbore
Stability Analysis of Heavy Oil Reservoir 14:40-14:48
1.2.E
Unconventional
Geomechanics
Characterization - 2
T. Ma1, Y. Qiu1, Y.
Liu2, G. Xiang Evaluation of anisotropic strength criteria for Longmaxi shale rock 14:00-14:08
E. Sarvaramini1, B.
Culver2, C. Clarkson3,
M. Dusseault
Shale fracability in Kaybob-Duvernay: a new approach based on
plasticity behavior 14:08-14:16
Z. Chen1, C. Leonardi1,
T. Flottmann2, S.
Mondal1
A new approach for measuring the shear strength of cleated coal 14:16-14:24
M. Benge1, Y. Lu1, J.
Jones1, A. Bunger1, A.
Haecker2, A. Rihn2, D.
Crandall3, G. Luo4, M.
Radonjic4
Mechanical Properties of Nominally Ductile and Brittle Zones
within the Caney Shale Formation 14:24-14:32
H. Yang1, L. Wang2, W.
Guo2, Z. Bi1, Y. Guo2
Experimental investigation of different influence mechanisms of
fracturing fluid immersion on continental shale 14:32-14:40
I. M. Arzuaga Garcia1,
H. H. Einstein1, J. T.
Germaine2
Direct Shear Tests on Opalinus Clayshale for Natural Fracture
Characterization 14:40-14:48
1.2.F Stress field and
beyond:
R. PRIOUL1, J.
Desroches2, E. Gaucher3,
Remembering Francois H. Cornet?s contribution to the
geomechanics and geophysics communities 14:00-14:08
Remembrance of
Francois Cornet
T. Berard4, M. Doan5, B.
Lecampion6, F.
Beauducel7
J. DESROCHES1, E.
Peyret2, A. Gisolf2, A.
Wilcox3, M. di
Giovanni3, A. Schram de
Jong3, B. Milos4, J.
Gonus4, E. Bailey4, S.
Sepehri5
Stress-Measurement Campaign in Scientific Deep Boreholes: from
Planning to Interpretation 14:08-14:16
Y. Guglielmi1, P. Cook1,
F. Soom1, P. Dobson1, T.
Kneafsey1, B. Valley2,
M. Kakurina2, A.
Niemi3, C. Tsang3, A.
Tatomir3, C. Juhlin3
Estimating Stress from Three-Dimensional Borehole Displacements
Induced by Fluid Injection in Different Types of Fractured or
Faulted Rocks
14:16-14:24
C. NAVILLE1, N.
CUENOT2, A.
TSELENTIS3, S.
SERBUTOVIEZ1, K.
KAZEMI4, J.
BRUNEAU1
S-wave birefringence variations from stress, pore pressure? 14:24-14:32
F. Ciardo1, B.
Lecampion2
Aseismic slip propagation in fractured rock masses driven by pore-
fluid diffusion 14:32-14:40
T. ISHIDA1, T.
YOKOYAMA2, K.
OGAWA3
Plan of publishing Fran?ois Cornet's book based on the manuscript
he left us 14:40-14:48
1.4.B Department of Energy GTO Overview by Dr. Sue Hamm and Geothermal Panel Discussion 16:00-16:50
1.4.C
Drilling - Open hole
wellbore mechanics
& stability 3
T. Wang1, K. Wang2, K.
Bo2, Z. Zhou3, K. Qiu3,
F. Zhang1, X. Wu3, Y.
Lu2
Study on optimization of anti-sloughing drilling fluid for mud shale
formation in Jidike formation based on rock mechanics 16:00-16:08
H. Gamal1, S.
Elkatatny1, B. Bageri1,
A. Adebayo2, R. Babu2,
S. Rizwanullah2
The Extended Exposure Time Control on Sandstone Pore System
and Rock Strength While Drilling Horizontal Wells 16:08-16:16
H. Kolmer, G. Hareland Using Drilling Data of Offset Wells and Core Data to Optimize
Perforation Selection for the Caney Shale 16:16-16:24
F. B. Fernandes1, A. S.
Santos de Oliveira1, A. Drilling and Completion Technologies for Pre-Salt Developments 16:24-16:32
C. Soares2, C. Y. dos
Santos Siqueira3, D. E.
Amorim Martins1, F. G.
Rezende3, E. R. dos
Santos4
C. Vivas, S. Salehi
Wellbore Strengthening for Geothermal Applications: Experimental
Study of Thermal Degradation of LCM to Address the Wellbore
Tensile Failure.
16:32-16:40
C. Gao1, C. Zhang2, X.
Chen3, Y. Wei2, Y.
Feng2
Case Study: Managing Wellbore Instability of a Fractured
Formation over 7500 Depth in Tarim Basin Through an Integrated
Geomechanics Approach
16:40-16:48
1.4.D Drilling - Cased hole
wellbore integrity 1
G. Han1, W. Arshad2, J.
Diessl3
Casing Damage in Hydraulic Fracturing: Geomechanical
Perspectives 16:00-16:08
N. Agofack, P. Cerasi Numerical simulation of fractures propagation around the wellbore:
Effect of the surrounding rock's stiffness 16:08-16:16
A. Moghadam, B. Orlic Estimation of initial cement stress in wells 16:16-16:24
O. Kolawole, A. Anya Assessing Mechanical Integrity of Cementitious Materials:
Microbial-Induced Precipitation vs Oil-Well Cement 16:24-16:32
J. Wise, R. Nygaard Top of Cement Selection Results in Leakage Pathways of Cased
Wellbores During Production 16:32-16:40
E. Skomedal, J. Park,
M. Soldal, H. Smith, S.
Mokkelbost
Electro-osmosis to enhance shale barrier 16:40-16:48
1.4.E
Unconventional
Geomechanics
Characterization - 3
X. Sun1, J. Li1, Y.
Zhang2, B. Xu3
Staged Geomechanical Dilation on SAGD Wells: Geomechanical
Study and Field Experience 16:00-16:08
A. Assady, S. Sagar, A.
Bellal, H. Jabbari
Application of Digital Rock Analysis (DRA) in Pore-Scale
Characterization of The Bakken Formation 16:08-16:16
Z. Cai1, J. Cole2, A. K.
Dey3, M. Zhang4, C.
Smith5, C. P. Tan1
A Comprehensive Integrated Workflow for 3D Geomechanical
Model Construction and Its Application in a Montney
Unconventional Gas Play in Western Canada Basin
16:16-16:24
S. Saurabh, S.
Harpalani
Feasibility of application of biogenic methane generation and
induced fracturing in shallow organic rock reservoirs 16:24-16:32
M. Zhang1, G. Zhang1,
X. Du2
Characterization of Fracture Process in Shale: Insights from Micro-
Scale DIC 16:32-16:40
I. Altaf1, I. H. Musa1, T.
C. Phuat1, Z. B. Zain1,
M. B. Yusoff1, M.
Adams2
3D Geomechanical Modelling for Unconventional Sweet Spot
Identification and Optimized Reservoir Development 16:00-16:08
1.4.F
Hydraulic fracturing
stress measurements -
interdisciplinary
aspects of theory,
performance, and
interpretation
H. Wu, P. Fu, J. Morris
Modeling the opening of natural fractures in the near-wellbore
environment and implication for stress measurements in inclined
wells: An example at the EGS Collab testbed
16:00-16:08
O. J. Ohanian1, Y.
Huang2, N. Zolfaghari2,
A. P. Bunger2, D. R.
VandenBerge3
High-Resolution Distributed Fiber Optic Measurement of Borehole
Fractures to Enable In-situ Stress Measurement 16:08-16:16
T. Doe Hydraulic Fracturing Stress Measurement at Fifty: Thoughts on
Standard Development 16:16-16:24
J. Adams The Hydraulic Fracturing Method of In-Situ Stress Testing from a
Field Equipment Perspective 16:24-16:32
T. Ito, T. Yokoyama Effect of system compliance on pressure-time curve at reopening
and new standard in Japan 16:32-16:40
J. Burghardt, D.
Appriou
State of Stress Uncertainty Quantification and Geomechanical Risk
Analysis for Subsurface Engineering 16:00-16:08
2.1.B
Rock Mechanics and
Geohazards in
Mining
A. Zhao1, Y. Li1, X.
Shi1, K. Zhao1, S. Hao2,
X. Gong2, S. Jiang2
An inversion method of the surface subsidence of a salt mine
solution mining 13:00-13:08
E. Mutaz1, M. Serati1,
M. Bahaaddini2, D.
Williams1
On the Evaluation of Crack Initiation Stress Threshold 13:08-13:16
S. D. Cylwik Three-Dimensional Anisotropic Shear Strength of Jointed Rock
Masses 13:16-13:24
H. Agrawal, S.
Durucan, W. Cao, A.
Korre
Probabilistic Risk Assessment of Rock Bursts and Excessive Gas
Emissions in Longwall Top Coal Caving Mining 13:24-13:32
F. CUI, Y. Zhou, Y.
ZHOU
Evolution Analysis of Thick and Hard Overburden Strata and Water
Conducting Fractured Zone in Fully Mechanized Top Coal Caving
Working Face
13:32-13:40
G. Sansyzbekov, A.
Adoko
Quantifying underground excavation damage induced by mine
seismicity 13:40-13:48
2.1.C Slope Stability, Dams
and Foundations
Z. Pan1, C. Zhang1, C.
Ma1, L. Ma1, S. Gan2
Study on the permeability characteristics of tailings with different
particle sizes and the variation of the saturation line of tailings dam 13:00-13:08
M. Geilikman Landslide Gouge Instability and its Precursor: Analytical Model 13:08-13:16
F. Fernandez1, R. L.
Sousa2, E. Vargas1, A.
Muller1, C. Sousa
Oliveira3, L. Ribeiro e
Sousa4
Landslide occurrencesin China during the Wenchuan Earthquake 13:16-13:24
E. N. Fosteris1, I. G.
Bakas1, K. E. Massoud2,
K. E. Loukakis1
Development of compaction methodology and quality control
procedures for large scale rockfill embankments. 13:24-13:32
C. Minto1, R.
Crickmore2, A.
Godfrey1, P. Clarkson1
Distributed Rayleigh Sensing for Slope Stability Monitoring 13:32-13:40
Q. Liu, D. S. Kieffer Deriving Three-Dimensional Rock Structure from LiDAR Point
Clouds for Evaluating Scour of the Ricobayo Dam Spillway 13:40-13:48
2.1.D Drilling - Cased hole
wellbore integrity 2
X. Xie, L. Edvardsen, P.
Cerasi
CO2-induced creep on Draupne shale and impact on cemented
wellbore integrity 13:00-13:08
X. C. Zhang1, Z. Chen2,
X. Y. Chen2, X. Wang1,
W. W. Yuan1, Q. R.
Yang1
The dual-parameter optimization method of floating
casingtechnology 13:08-13:16
A. Corina1, J.
Wollenweber1, K.
Castelein1, K. v. Valk1,
H. Fischer2, A.
Moghadam1, G. Heerens
Application of Bentonite as an Alternative Sealing Material for
Deep Hydrocarbon and Geothermal Wells
13:16-13:24
A. Ahmed, A. A.
Mahmoud, S. Elkatatny,
A. Al-Majed
Evaluation of Granite Waste and Silica Flour in Oil Well
Cementing 13:24-13:32
A. Ahmed, B. Bageri, J.
Al Jaberi, S. Elkatatny,
S. Patil
Improvement of Well Cementing Properties Using Perlite Particles 13:32-13:40
L. Sun, X. Pang, Y. Bu,
C. Wang
Experimental study of the effect of curing temperature and pressure
on the property evolution of oilwell cement 13:40-13:48
2.1.E
Induced Seismicity
(Disposal/Stimulation
Wells)
B. Hemami, S. Feizi
Masouleh, A. Ghassemi
Basement Fault Reactivation in Response to Injection into
Overlying Layers 13:00-13:08
T. S. Eyre, D. W. Eaton Stochastic 3D Modelling for Induced Seismicity Risk Mitigation 13:08-13:16
C. Zhaowei1, C. Hu2, S.
Yuanhui3, D. Jianhui4
Case study:In-situ stress and fracture zone activation analysis of
Changning shale gas block in Sichuan Basin 13:16-13:24
J. Park1, R. Chen1, A.
Datta-Gupta1, S. Lele2,
T. Tyrrell3
Detailed Fault Modeling at Azle area, North Texas and Its
Implication on Induced Seismicity 13:24-13:32
Z. Esmaeilzadeh, D. W.
Eaton
Integrated Reservoir Study Applied to Induced Seismicity Analysis
- Case Study of the Septimus Field 13:32-13:40
N. Z. Dvory, M. D.
Zoback
Assessing Fault Slip Potential in a Continuously Varying Stress
Field - Application in the Delaware Basin 13:40-13:48
2.1.F
Coupled THMC
Experiments
T. Jeppson, D. Lockner,
B. Kilgore, N. Beeler, J.
Taron
Evolution of permeability and strength recovery of shear fractures
under hydrothermal conditions 13:00-13:08
K. Liu1, J. J. Sheng2
Experimental study of the effect of temperature change in water-
shale interaction on fracture generation and permeability change in
shales under stress anisotropy
13:08-13:16
S. Nakagawa Chemically induced reduction of fracture closure for shale fractures
containing sub-monolayer proppant 13:16-13:24
C. Chang, S. Borglin,
C. Chou, T. Kneafsey,
Y. Wu, L. Zheng, S.
Nakagawa, H. Xu, L.
Peruzzo, J. Birkholzer
Experimental Study of Coupled THMC Processes in Bentonite
Buffer for Geologic Disposal of Radioactive Waste 13:24-13:32
Q. C. Wenning1, C.
Madonna1, T. Kurotori2,
C. Petrini1, J. Hwang2,
A. Zappone3, S.
Wiemer3, D. Giardini1,
R. Pini2
X-ray CT imaging of displacement- and swelling-induced fracture
aperture changes in clay-rich rock 13:32-13:40
M. Haddad, M.
Ahmadian, J. Ge, S.
Hosseini, J. Nicot, W.
Ambrose
Hydrogeological and Geomechanical Evaluation of a Shallow
Hydraulic Fracture at the Devine Fracture Pilot Site, Medina
County, Texas
13:40-13:48
2.2.B
Unconventionals
Posters:
Geomechanics /
Drilling Challenges
F. Altawati1, H. Emadi1,
R. Khalil2
Investigating Physical and Dynamic Elastic Properties of Eagle
Ford Shale Rock Samples- An Experimental Study
14:00-14:50
O. Kolawole, I. Ispas,
M. Kumar, C. Millikan,
M. Watson, T. Gamadi,
S. Henderson
Effect of Biogeomechanical Modified Near-Wellbore Properties on
Hydrocarbon Recovery: Insights from Niobrara Shale
P. Li1, Y. Li1, X. Shi1, S.
Hao2, X. Gong2, S.
Jiang2
The effects of sediment heights on the stability of U-shaped
horizontal salt cavern
L. Lun1, B. Maulianda2,
D. Mohshim1, A.
Prakasan1, R. Barati3, H.
Mohamad4
Geomechanics Numerical Simulation of Stress Changes for
Permanent Plug and Abandonment Design in Montney Shale
Formation, British Columbia
X. Dai, Z. Huang, H.
Shi, C. Xiong, Z. Cheng
Experimental analysis on rock failure mechanism under the joint
action of cutting and jet impingement
C. Chen1, S. Wang1, C.
Lu1, K. Wang1, J. Lai1,
Y. Liu1, D. Liu2, P. Zuo1
An Experimental Investigation of Hydraulic Fracture Conductivities
in Shales
H. H. Alkinani1, A. T.
Al-Hameedi1, S. Dunn-
Norman1, M. Aldin2, S.
Govindarajan2
How Different are Ultrasonic Lab and Wireline Measurements in
the Estimation of Dynamic Elastic Moduli?
C. D. Savitri1, B.
Maulianda2, D. F.
Mohshim1, K. A.
Elraies1
A Novel Estimation Approach of Unconfined Compressive Strength
(UCS) and Improved Rock Mechanical Properties Correlations by
Considering The Effect of Overpressure Condition, Mineralogy,
and Shale Composition in Montney Shale Gas, British Columbia,
Canada
J. Yuan1, M. Chu2, Y.
Feng2, B. Yu2, C.
Zhang2, J. Deng
An Integrated Approach to Evaluating Wellbore Instability in an
HPHT Field in the South China Sea
2.2.C Civil / Mining
Posters
S. Yagiz1, K.
Yermukhanbetov1, A.
Yazitova1, J. Rostami2
Utilizing Linear Cutting Machine Test for estimating Cutting Force
via Intact Rock Properties
14:00-14:50
J. Deng1, W. Cui1, Y.
Zhu1, Y. Liu1, S. Du2
Study on combined bearing effect of concrete lining and
surrounding rock of large tunnel and lining optimization
D. Pinto de Oliveira1,
E. do Amaral Vargas
Jr.1, L. Mej?a Camones2,
R. Quadros Velloso1
Development of a 3D numerical code for simulating fracturing
processes in geomaterials
B. Jang, K. Lee, H.
Jang, A. Kim, I. Baek
Pull Test: An Optimal Method for Measuring the Basic friction
Angle of Rock
B. V. Bui, Y. M. Tien,
C. H. Juang
Numerical simulation of effect of joint dip angle on displacement
around the tunnel
S. Zafar1, A. Hedayat1,
O. Moradian2
Laboratory Investigation of Stress Relaxation in Brittle Rocks using
Acoustic Emission and Digital Image Correlation
M. Khandelwal, J. B.
Meerza
Effect of multiple loading rates on uniaxial compressive strength of
rock
H. Farhadian1, M.
Salehzadeh1, A. Nikvar-
Hassani2
Model Dimension Effect in DEM and FEM Simulations for
Assessment of Water Inflow to Tunnel
J. H. Ma, Y. E. Li, A.
Cheng
Stress dependent fracture flow and elastic relations and their
application for medium characterization
Y. Zhang, Y. Jin, Y.
Xia, Y. Zhang
An Analytical Model for Acid-etched Damage of Deep Carbonate
Reservoirs
2.2.D
Conventionals
Posters:
Characterization /
Reservoirs
M. Heidari1, M. A.
Nikolinakou2, P.
Flemings1, M. Hudec1
Prediction of pore pressure and the full stress tensor from seismic
velocity around a 3D salt dome in Green Canyon, Gulf of Mexico
14:00-14:50
A. T. Al-Hameedi1, H.
H. Alkinani1, S. Dunn-
Norman1, M. Aldin2, S.
Govindarajan2, A.
Guedez2
A New Technique to Estimate Static Elastic Moduli from
Multistage Triaxial Tests
A. T. Al-Hameedi1, H.
H. Alkinani1, S. Dunn-
Norman1, M. A. Al-
Alwani1, M. Aldin2, O.
Abdulbaki2, D. Gokaraju
Empirical Correlations to Correct Elastic Properties from Dynamic
to Static with a Case Study from Southern Iraq
S. Guo, Z. Wang, Q.
Zeng
Uncertainty Assessment on the Performance of Horizontal Wells
Prediction in bottom water reservoir Based on Analytic Hierarchy
Process
M. Amir Rashidi1, M.
Kashim1, S. Md Shah1,
Z. Abu Bakar1, C. Tan1,
R. J. Leite1, W. Sazali1,
X. K. Wu2, Z. C. Xi2
Understanding effects of varying CO2 saturations on ultrasonic
velocities of K-field carbonate, offshore Sarawak Malaysia
E. F. Araujo-
Guerrero1, G. A.
Alzate-Espinosa1, G.
Zambrano2, R.
Chalaturnyk2, J. G.
Osorio-Gallego3
Advanced Geomechanically laboratory testing for sand production
with aids of 3D printing technology.
K. Adisornsupawat, S.
Kusolsong
Numerical simulation for compaction and subsidence during
production period for a large carbonate gas field
Y. Gao1, M. Chen2 Investigation on Liquidity of Karamay Oil Sand Bitumen under
Reservoir Temperature and Pressure
S. Zhang Researchonquantitativeriskevaluationofcasingdamagecausedbylong-
termwaterflooding
X. Jiang Discussion on optimization method of development parameters for
preventing casing damage in waterflooding oilfield
S. Esmaeilpour, I. Ispas Pore Pressure Estimation using Seismic Inversion and MDT Data
Based on Bowers Relation
Z. Zhu, X. Song, G. Li,
X. Yao, S. Jing, S. Zhu,
S. Duan
Settling Velocity of Arbitrary Shape Particles in Vertical Fractures:
Experimental Study & Intelligent Prediction
2.2.E
Unconventionals
Posters: Hydraulic
Fracture Modeling
M. T. Sipahi, K. Develi
Modelling Of Hydraulic Fracturing Treatments In South East Part
Of Turkey With Discrete Fracture Network Method And
Comparison With Simulation Results
14:00-14:50
s. Fu, M. Chen, Y. Xia,
S. Zhou, X. Qiu
Study on fracture height growth of integrated hydraulic fracturing
for coalbed and shale interbedded reservoir in Shanxi formation,
Ordos Basin
Z. Chang1, B. Hou1, D.
Xu2
Simulation of optimization of perforation parameters on shale oil
reservoir multi-clustered fracturing
J. Zhou1, H. Mao2, T.
Jiang1, L. Zhou1, H.
Wu3, X. Jin3
Study on the propagation and numerical simulation of acid fractures
in Ordovician carbonate rocks of Shunbei Oilfield
R. Wang, H. Qu Laboratory Results of Proppant Transport in Complex Fracture
Systems
L. Tao A New fracture network swept volume prediction Hybrid Model for
multi-fractured horizontal wells in tight oil reservoirs
J. Leem1, I. Musa1, C.
Tan1, M. Yusoff1, Z.
Zain1, J. Kear2, D.
Kasperczyk2, Z. Chen2,
S. Salimzadeh2
Advanced eXtended Finite Element Method Hydraulic Fracturing
Model for Optimizing Hydraulic Fracture Design in Challenging
Geomechanical Environments
Y. Zhang, Y. Xia, S. Fu,
Y. Zhang
Rock Mechanical Properties & Hydraulic Fracture Vertical
Propagation Behavior of the Coal Measure Shale Reservoir.
2..2.F
Interdisiplinary
Posters: Shales /
Drilling
L. Tao, J. Guo, Y. Zhao,
C. Chen
Experimental study on salt ion diffusion law of shale in the Sichuan
Basin,China
14:00-14:50
Y. Zhao1, L. Tao2, J.
Guo1, Z. Zhao1
Experimental study on water imbibition mechanism in organic shale
based on the low field NMR
O. Ozotta1, M.
Ostadhassan1, V.
Rasouli1, H. Pu1, V.
Dawodu2, O. Kolawole3,
M. Malki1
Homogenization Models to Determine the Change in Elastic
Properties Due to CO2 Injection
H. Qu, S. Tang, Y. Hu,
R. Wang, X. Ao, L. Xue
The Investigation on Microscopic Mechanism of Shale Erosion by
High Pressure Abrasive Waterjet during Hydraulic Fracturing
L. Han1, S. Yang1, X.
Wu2
Stochastic and empirical methods to determine the critical
conditions for casing deformations in the Sichuan shale gas
development
Q. Li1, S. Li2, J. Liu3, H.
Wen4
Rock Mechanical Properties of Deep Shale-gas Reservior and Their
Effects on Reservoir Stimulation
S. Li1, H. Zi1, Z. Zou1,
C. Xian2
xperimental study on creep property of shale oil reservoir rock at
110 ?C and its influence on fracture width
T. Yokoyama1, A.
Funato1, T. Ito2, K.
Ogawa3, T. Nayuki4
Development and application of high stiffness hydraulic fracturing
systems for stress measurements corresponding to new standard in
Japan
M. Soldal1, E.
Skurtveit2, J. C. Choi2 Poroelastic and mechanical anisotropy of the Draupne caprock
M. Jones1, S. Voegeli1,
M. Trzeciak2, J. Nopola1
Modeling Validation of Mechanical and Thermal Borehole
Breakouts from Polyaxial Laboratory Tests to Determine Maximum
Horizontal In Situ Stress
G. D. Couples What Is the Process Indicated by Vein Filled Caprocks
J. Duhan, S. Voegeli
Probability and Sensitivity Analysis of Geomechanical Parameters
Affecting In-Situ Stress State Calculated from Induced Fracturing
Through Directional Borehole Cooling in Enhanced Geothermal
Reservoirs
Keynote Ahmad Ghassemi 14:50-15:50
2.4.B
Collab
Measurements,
Simulations and
Learnings
E. Mattson1, G.
Neupane2, M. White3,
M. Ingraham4
EGS-Collab Experiment 1 Flow and Tracer Tests at the Sanford
Underground Research Facility 16:00-16:08
M. MENG, L. Frash,
W. Li, N. Welch, B.
Carey
Measurement of Geomechanical and Hydrological Properties of
Geothermal Rocks 16:08-16:16
C. Boese1, G. Kwiatek1,
T. Fischer2, J. Renner3,
G. Dresen1
AE-type hydrophone performance during the STIMTEC and
STIMTEC-X hydraulic stimulation campaigns at Reiche Zeche
Mine, Germany
16:16:16:24
S. Xin, Z. Zhou Research on the Conductivity of Artificial Fractures in Hot Dry
Rock Geothermal Reservoir 16:24-16:32
M. Hertrich1, F.
Bethmann2, B. Brixel1,
K. Broeker1, R. Castilla2,
T. Driesner1, N.
Gholizadeh1, D.
Giardini1, V. Gischig3,
D. Jordan1, P. Kaestl
Characterization, hydraulic stimulation, and fluid circulation
experiments in the Bedretto Underground Laboratory for
Geoenergies
16:32-16:40
T. J. Kneafsey1, D.
Blankenship2, P.
Dobson1, M. White3, J.
Morris4, P. Fu4, P.
Schwering2, J. Ajo-
Franklin5, H. Wu4, L.
Huang6, H. Knox
Field Experiments and Model Validation: The EGS Collab Project
(2021 Update)
16:40-16:48
2.4.C
Coupled THMC
modeling
C. Boley, Y.
Forouzandeh
Coupled Thermo-Hydro-Mechanical-Chemical Modeling (THMC)
- A prediction tool for determining the grouting range in fissured
rock
16:00-16:08
J. Morris1, A. Nichols2,
B. Isaac2, C. Decker2, Y.
Kanarska2, A.
Shestakov2, K. Kim2
The Influence of Coupled Thermal and Geomechanical Processes
Upon Post-Detonation Fireball Entrainment 16:08-16:16
L. Zheng, H. Xu, J.
Rutqvist, J. Birkholzer
Coupled THMC models for bentonite barrier in nuclear waste
repositories: modeling approach, validation by field test and
exploratory models
16:16:16:24
F. Amour, M. Bonto,
M. R. Hajiabadi, H.
Nick
Sensitivity study of chemical effects on the compaction behavior of
reservoir chalk (Dan field, Danish North Sea) 16:24-16:32
M. Liu, H. Huang Finite Element Modeling of Poroelastic Spherical Indentation with
Frictionless Contact 16:32-16:40
L. Zhang, B. Wu Numerical modelling of natural gas hydrate dissociation in rock
reservoir with multiple fractures created by hydraulic fracturing 16:40-16:48
2.4.D Drilling - Cased hole
wellbore integrity 3
E. Arjomand, A.
Movassagh, J. Kear
The Effects of Reservoir Deformations on the Integrity of Cement
Plugs in Abandoned Wells 16:00-16:08
W. Zhang, A. Eckert,
H. Ma
Integrated laboratory and numerical evaluation for wellbore
integrity of wells under downhole conditions 16:08-16:16
A. Dahi Taleghani Machine learning Approach to generate synthetic cement evaluation
logs for wellbore integrity analysis 16:16:16:24
D. Mayibeki, V. N.
Kjeldal, S.
Akhtarmanesh, G.
Hareland
Nanoparticle-Based Cement: A solution to Reduce Non-Productive
Time and Improve Wellbore Integrity? 16:24-16:32
C. Massion1, Y. Lu2, A.
Bunger2, D. Crandall3,
M. Radonjic1
Graphene Additions to Influence Mechanical Properties of
Wellbore Cement 16:32-16:40
H. Wei, S. Zhou The use of liquid nano-silica in cementing work & its advantages in
cement sheath integrity 16:40-16:48
2.4.E
Hydraulic Fracture
Modeling-
Theoretical,
Experimental and
Numerical - 1
Y. Han1, J. Furtney2, M.
Purvance2
DEM-Continuum Mechanics Modeling of Dynamic Stimulation of
Boreholes
16:00-16:08
S. Sircar, V. Maji XFEM simulation for Hydraulic Fracture Propagation in
Saturated Porous Medium 16:08-16:16
H. Wang1, Y. Su1, W.
Wang1, Q. Zhang2, G.
Li1
Effect of microscale compressibility and nanoscale effects on
fracturing fluid imbibition in shale oil reservoirs 16:16:16:24
G. da Fies1, M. Dutko2,
G. Mishuris1
Remarks on dealing with Toughness Heterogeneity in Modelling of
Hydraulic Fracture 16:24-16:32
D. M. Valiveti1, V.
Dyadechko1, T. Song1,
A. Sharma2, L. Refojo
Vischi3, J. Venkatesan2,
G. Gireesh2, V. Gupta1
High Fidelity Hydraulic Fracturing Simulator For Unconventionals
- Capturing Intra-stage, Inter-stage and Inter-well Interactions 16:32-16:40
S. Cheng1, M. Zhang1,
B. Wu1, X. Zhang2
Numerical simulation of hydraulic fracture initiation and
propagation from a circular wellbore by using dual boundary
element method
16:40-16:48
2.4.F
Drilling - Mechanics,
process and
automation
G. G. Gurkan1, H. S.
Duzgun2
NUMERICAL ANALYSIS OF DTH DRILL BITS FOR
REVERSE CIRCULATION DRILLING 16:00-16:08
W. Quan, J.
Someehneshsin, A.
Abugharara, Y. Zhang,
S. Butt
Effects of low binder proportions and internal vibration on early age
behavior of cemented tailings backfill in mining by drilling
applications
16:08-16:16
A. Dahi Taleghani SmartLost Circulation Materials for Sealing Large Width Natural
Fractures 16:16:16:24
K. Hisham Optimal Position Control for RSS during Lateral/Tangent Sections
in Cruise mode 16:24-16:32
L. Barnett1, K. Klein1,
M. Al Dushaishi1, R.
Nygaard2, G. Hareland1
Field Data Analysis and Modeling of Drillstring Vibrations to
Identify Inefficiency in Deep Geothermal Drilling 16:32-16:40
Y. Li1, Z. Chen1, Y. Ye1,
Y. Yang1, H. Liu2
Modeling Brittle Rock Cutting using Combined Finite-Discrete
Element Method with Node Splitting 16:40-16:48
3.1.B
Slope and
Underground Mine
Development
B. Bazarbay, A. Adoko A comparison of prediction and classification models of unplanned
stope dilution in open stope design 13:00-13:08
J. Mulet1, J. Vallejos2,
R. Rimmelin3
Estimating the rock mass disturbance zone in open pit slopes related
to stress relaxation 13:08-13:16
W. Rodr?guez1, J.
Vallejos2, P. Landeros1
Application of Destress Blasting in the Access Tunnel of the Andes
Norte New Mine Level Project. El Teniente Mine- Chile 13:16-13:24
D. R. Morrison1, D.
Childs1, J. McNabb1, R.
Barkley1, E. Coetzer2
Drone Photogrammetry Structural Mapping & Geotechnical Slope
Design Optimization 13:24-13:32
S. D. Williams1, G. A.
Raseumako1, T.
Zvarivadza2
Investigating impacts of earthquakes in Open Pit Mines in
Botswana 13:32-13:40
A. Aladejare1, M.
Onifade2, V. Akeju3
Probabilistic failure analysis approach for quantifying the effects of
uncertainties on rock slope failure probability 13:40-13:48
3.1.C
Tunneling and
Underground
Construction
I. Haryono1, A.
Purwodihardjo
Discrete Fracture Network Approach in Ground Support Design
Optimisation for Large Span Cavern in Jointed Rock Mass 13:00-13:08
S. Wang1, Z. Zhang1, X.
Huang1, X. Li1, Z. Ai2,
Z. Guo3, Y. Deng3
Stability of a rock tunnel passing through talus-like formations:
insight from in-situ monitoring 13:08-13:16
S. Basireddy1, M.
Serati1, N. Jackson2, G.
Malgotra1, H. Asche1
Utilization of Crushed Waste Glass in Shotcrete 13:16-13:24
A. Khetwal, J. Rostami,
P. Nelson
Geotechnical variability assessment in utilization estimation for
hard rock TBMs 13:24-13:32
J. S. Cornet, C. Plua, J.
Jaber, R. de la Vaissi?re,
J. Zghondi, C. Renaut,
G. Armand
An overview of the experimental investigation of the
hydromechanical behavior of an X shaped underground intersection
in the Callovo-Oxfordian claystone
13:32-13:40
K. Arora, M. Gutierrez Visco-Elastic Plastic Solution for Deep Circular Tunnels using
Burger's Model and Mohr-Coulomb's Criteria 13:40-13:48
3.1.D Drilling - Depleted
reservoirs
J. Zhang1, S. W.
Dosser1, S. Li1, S.
Edwards1, K. Mahadev1,
A. Singh2
An integrated Method to Define Fracture Gradient in Depleted
Sands 13:00-13:08
T. M. Husain, D.
Mikulencak, M. Lin, M.
Tjioe, A. Yang, C.
Enyioha
WELLBORE STRENGTHING: Portfolio campaign to improve the
operational drilling window in Gulf of Mexico 13:08-13:16
F. Ardhiansyah1, R. A.
Brata2, R. Ricki2, R.
Azrai1
4D Geomechanics Assessment in North Madura Field Indonesia
Lead to Successful Drilling Campaign 13:16-13:24
C. Zambrano, C.
Strieter, T. Hoeink
Dual completion design in stacked reservoir based on sand
production predictions 13:24-13:32
S. Akhtarmanesh, A.
Atashnezhad, G.
Hareland, M.
Aldushaishi
ROP Model for PDC Bits in Geothermal Drilling 13:32-13:40
A. Atashnezhad, S.
Akhtarmanesh, G.
Hareland, M.
Aldushaishi
Developing a Drilling Optimization System for Improved Overall
Rate of Penetration in Geothermal Wells 13:40-13:48
M. Wu1, K. Gao2, J.
Liu3, Z. Song2
Effects of rock heterogeneity on hydraulic fracture propagation: A
numerical study using the combined finite-discrete element method 13:00-13:08
3.1.E
Hydraulic Fracture
Modeling-
Theoretical,
Experimental and
Numerical - 2
W. Li, L. P. Frash, J. W.
Carey, N. J. Welch, M.
Meng, H. Viswanathan,
H. Nguyen, S. Rahimi-
Aghdam, Z. Bazant
Effect of Injection Parameters on Hydraulic Fracture Branching 13:08-13:16
W. Li, Z. Lei, V. Chau,
L. Frash, J. W. Carey,
M. Meng, E. Rougier, H.
Viswanathan, S. Karra,
H. Nguyen, Z. Bazant
3D Numerical Modeling of Hydraulic Fracture Branching 13:16-13:24
Z. Guo1, S. Tian1, Y.
Yong1, L. Ma1, Q. Liu2,
Y. Zhang3, R. Yang1
Fracture Geometries Influenced by Distances between Adjacent
Layers of Radial Boreholes for Hydraulic Fracturing 13:24-13:32
D. Zhou1, G. Zhang1, M.
Tang2 Mechanisms of sub-parallel fractures under cyclic injection 13:32-13:40
J. E. Burtonshaw, R. N.
Thomas, A. Paluszny, R.
W. Zimmerman
Effect of Viscosity and Injection Rate on the Tensile and Shear
Deformation Experienced by Interacting Hydraulic and Natural
Fractures
13:40-13:48
3.1.F Subsurface storage
and sequestration
O. Kolawole1, M.
Kumar1, I. Ispas1, K.
Huffman2
Impact of Integrated Biogeomechanics on CO2 Storage in Depleted
Hydrocarbon Reservoirs: Insights from Wolfcamp Shale 13:00-13:08
X. Zheng1, D.
Espinoza1, M.
Vandamme2, J. Pereira2
Pressure Monitoring above the Injection Zone for CO2 Geological
Storage 13:08-13:16
P. Berest1, B. Brouard2,
G. Hevin3, A.
Reveillere4
Tightness of salt caverns used for hydrogen storage 13:16-13:24
A. Rangriz Shokri1, S.
Talman1, R.
Chalaturnyk1, E. Nickel2
On the Temporal Evolution of Non-Isothermal Injectivity
Behaviour at an Active CO2 Injection Site 13:24-13:32
I. Rahimzadeh Kivi1,
V. Vilarrasa1, R.
Makhnenko2
Hydromechanical processes of supercritical CO2 intrusion into
shaly caprocks 13:32-13:40
J. W. Carey, M. Meng,
L. P. Frash, N. J. Welch
Challenges in the Measurement and Interpretation of Debonding at
the Cement-Casing Interface 13:40-13:48
3.2.B
Characterization -
Pore pressure &
fracture gradient
R. Talreja1, R. R.
Kumar1, J. Bhagat2, B.
Bandyopadhyay2, D.
Surve2, A. Bhuskute2, P.
Kumar1, A. K. Singh1
Overpressure Characterization of Panna Formation, Western
Offshore Basin, India 14:00-14:08
A. Ghosh1, A.
Chatterjee2, J. L. Ai
Yun3, S. Sano4
Understanding the Mechanism to Successful Pore Pressure
Prediction -A Case Study from Offshore Sarawak 14:08-14:16
S. Li, M. Albertin, J.
Bergeron, R. Ansari
Constraining Minimum Horizontal Stress and Fracture Gradient
using Time Based APWD data and Mud Loss Events 14:16-14:24
C. XIE, Y. LU, H.
PANG
Pore pressure prediction: A new approach based on Skempton
method 14:24-14:32
S. Green1, L. Vernik2, J.
Heller2
The importance of correcting for TOC to reduce uncertainty in pore
pressure prediction 14:32-14:40
N. Peng, T. Ma, P.
Chen, G. Cao
Effects of pumping modes on transient pressure response for
formation pressure testing while drilling 14:40-14:48
3.2.C
Experimental Rock
Mechanics /
Advances in Rock
Testing 1
B. Khadivi Boroujeni,
A. Heidarpour, H.
Masoumi
Comparative study on the failure mechanisms of rocks with various
geological origins 14:00-14:08
J. Shakeri1, M.
Asadizadeh1, N.
Babanouri1, T.
Sherizadeh2, S. Nowak2
Impact energy required for crack initiation in a Brazilian disc
containing non-persistent joints subjected to drop hammer test 14:08-14:16
H. Aldannawy, L.
Gerbaud, A. Rouabhi On the influence of tool shape on percussive drilling in hard rocks 14:16-14:24
J. Yim, S. Hong, Y.
Lee, K. Min
Determination of five elastic constants of transversely isotropic
rock from a single core by concentrated loading and numerical
iteration
14:24-14:32
R. K. Verma, G. D.
Nguyen, M. Karakus, A.
Taheri
AUSBIT: A novel approach to capturing snapback in indirect
tensile testing 14:32-14:40
N. ZHANG1, A.
Hedayat1, A. Khan1, H.
Bola?os Sosa2, P. Garg1
Understanding the mode I fracture behaviors of the geopolymer
made by alkaline activation of gold mine tailings 14:40-14:48
3.2.D
Characterization -
Novel techniques for
Geomechanics 1
L. Zhan1, J. c. Guo1, B.
Gou1, C. Liu2, X. Li1
Experimental Study on Strength Characteristics and Deformation
Mechanism of Tight Carbonate Rocks under Triaxial Stress 14:00-14:08
A. MITRA1, M. Aldin1,
M. Myers2, L. Hathon2,
D. Gokaraju1, O.
Abdulbaki1, H. Aldin1,
A. Thombare1, S.
Govndarajan1, R.
Patterson1, S. Prak
Maintaining Uniaxial Strain Boundary Condition in absence of
Radial Deformation Monitoring 14:08-14:16
W. Wang, D. R. Schmitt Static measurements of the third-order elastic constants of rocks 14:16-14:24
T. Lei1, L. Liang1, M.
Hamada2, R. Prioul1, A.
Donald3, E. Velez
Arteaga4
Automatic borehole sonic processing for high-resolution
mechanical properties 14:24-14:32
Y. Gordin1, H. J.
Vinegar1, A. Canning2,
Y. H. Hatzor1
Rock physics application for predicting thermal maturation of
organic-rich carbonates 14:32-14:40
D. Cabrera, F.
Samaniego
Estimation of residual oil saturation in fractured rock by scaling
immiscible displacement 14:40-14:48
3.2.E
Hydraulic Fracture
Modeling-
Theoretical,
Experimental and
Numerical - 3
Z. Xie1, X. Wu1, Z.
Huang*1, X. Gu2, P.
Huang1, W. Zou1
A visualization study on interaction between hydraulic fractures and
natural fractures 14:00-14:08
V. Isaev, A. Tikhonov,
S. Idimeshev, L. Semin,
D. Bannikov, I.
Velikanov
Lagrangian modeling of hydraulic fracturing materials injection 14:08-14:16
J. Huang1, Y. Hao2, R.
R. Settgast2, J. A.
White2, K. Mateen1
A Continuum Model for Simulating Proppant Transport and Fluid
Flow in Hydraulic Fractures 14:16-14:24
C. Lu1, Q. Zeng1, H.
Lu2, J. Wang1, J. Wang1,
Q. Meng1, J. Wang3, Z.
Du3, X. Meng3, G.
Zhou3, M. Song3
Study on the propped mechanism of proppant in tortuous micro-
fractures 14:24-14:32
C. Chen1, S. Wang1, C.
Lu1, K. Wang1, J. Lai1,
Y. Liu1, D. Liu2, T. Liu1
The Impact of Surface Roughness and Injection Rate on Acid-
fracture Conductivity 14:32-14:40
S. Salimzadeh Numerical Simulations of Directional Hydraulic Fracturing
Experiments 14:40-14:48
3.2.F Mechanics and
physics of Shale
J. Yu1, J. Wang2, S.
Wang2, Y. Li2, A.
Singh2, P. Rijken2, D.
Elsworth1
Propped Fracture Conductivity Evolution During Reservoir
Drawdown 14:00-14:08
M. Halifu1, L. Tao2 Experimental study on hydration mechanism of shale
intheSichuanBasin,China 14:08-14:16
K. L. McCormack1, M.
D. Zoback2
Layer-to-Layer Stress Variations in the Niobrara Shale and Codell
Sand, DJ Basin, Colorado: Implications for Hydraulic Fracturing 14:16-14:24
S. P. Graham1, M.
Rouainia1, M. T.
Elastic Stiffening of Shale up to 200 oC: Insights from High-load
Nanoindentation Tests 14:24-14:32
Ireland1, A. C. Aplin2, P.
J. Armitage3
M. Lozovyi1, E. Fj?r2,
K. M. Gawel2, J. F.
Stenebr?ten2, R. M.
Holt1
Impact of acid treatment on shale creep and formation of natural
barrier 14:32-14:40
Y. Hu, H. Qu Investigation on Shale Breakage Mechanism by High Pressure
Abrasive Waterjet 14:40-14:48
Panel Women in Rock Mechanics 14:50-15:50
3.4.B
Geothermal
Simulations and
General Geothermal
Considerations 1
P. Xing1, B. Damjanac2,
Z. Radakovic-Guzina2,
A. Finnila3, R.
Podgorney4, J. Moore1,
J. McLennan5
Numerical Simulation of Injection Tests and Hydraulic Fracturing
Stimulation Design of the Enhanced Geothermal System Well at
Utah FORGE Site
16:00-16:08
B. Gou1, N. Qin1, Y. M.
Zeng2, C. J. Ren1, L. C.
Zhou3, C. Wang1, C. J.
Guo1, F. Liu4
Acidizing Model To Couple the Closure stress and Acid-rock
Reactive Transport in Naturally Fractured Carbonate Reservoir 16:08-16:16
A. Ghavidel, M. B.
Dusseault, R. Gracie
The effect of variable convective heat transfer on the outlet fluid
temperature from Enhanced Geothermal Systems 16:16-16:24
A. Ghavidel, M.
Dusseault, R. Gracie Heat production from horizontal wells 16:24-16:32
Y. Wang Fluid flow and heat transfer from a complex fractured network for
energy extraction in EGS 16:32-16:40
Y. Wang Wellbore responses during cold water circulation in EGS 16:40-16:48
3.4.C Drilling Challenges
in Unconventionals
X. Wang1, h. zhang1, H.
Wu1, Z. Lu2, R. Xie3, Y.
Wu3, J. Jiao3
Experimental Study On The Influence Of Components On The
Drillability Of Conglomerate 16:00-16:08
T. Xie1, Z. Li2, X. y.
Chen2, J. Xu1, L. k.
Chen1, Y. You3, X.
Wang1
Continuous Circulation Drilling :How to Determine the Critical
Circulation Displacement of Drilling Fluid in the Process of Drill
Pipe Connection?
16:08-16:16
A. Feoktistova1, P.
Vereshchagin2, A.
Bochkarev1, A. Gula1,
A. Vishnivetskiy1, P.
Rodionova1, A.
Ugryumov3
Geomechanical modeling as optimization of drilling process in
Western Siberia
16:16-16:24
J. m. Fu1, Z. Li2, X. y.
Chen2, X. p. Wang1, L.
Han1, W. Wang1
Numerical Investigation on the Transportation of Small Size
Cuttings in Extended Reach Drilling 16:24-16:32
C. R. Leonardi1, R.
Zhong1, T. R. Mitchell1,
T. Flottmann2, D.
O'Hagan2, Z. Chen1, R.
L. Johnson Jr1
Analytical and numerical assessment of the influence of bulk coal
strength on drilling operations in unconventional coal seam gas
wells
16:32-16:40
W. He, Z. Chen, H. Shi,
S. Li, H. Chen
Numerical Analysis on Rock-Breaking Mechanisms of Various
Kinds of Ridged PDC Cutters 16:40-16:48
3.4.D Novel techniques for
Geomechanics 2
Y. Gao1, R. Eve2, R.
Heller3, I. Ispas4, J.
McLennan5, E.
Detournay1
A Reinterpretation of Fracture Toughness From Fluid Injection
Testing 16:00-16:08
S. Wu1, H. Ge2, T. Li3,
X. Wang2, K. Gao1
Application of three-component acoustic emission sensor in
uniaxial compression rock failure experiments 16:08-16:16
Q. Li1, S. Li2, H. Jiang3,
L. Ren4, J. Liu5
Ultra-deep Sandstone Rock Mechanics and Their Effects on
Hydraulic Fracturing Treatment 16:16-16:24
J. N. da Cruz1, D. L.
Pilloto1, N. F. Coutinho1,
J. Peixoto1, S. Fontoura1,
M. Coelho1, C.
Gon?alves2, R. Dias2
Geological and Geotechnical 3D soil modelingofultra-
deepwatersoilfieldintheEasternBrazilianMargin 16:24-16:32
S. Esmaeilpour, I. Ispas Pore Pressure Prediction Using Model Based Seismic Inversion and
Downhole Measurements 16:32-16:40
E. N. Sarris1, E.
Gravanis2, L.
Papaloizou1
A Hydro-Mechanical Constitutive Law for Modelling Sand
Production 16:40-16:48
3.4.E
Hydraulic Fracture
Modeling-
Theoretical,
Experimental and
Numerical - 4
N. Li1, S. Zhang2, H.
Wang1, Y. Zou2, Z.
Zhang2, M. Chen3
Laboratory hydraulic fracturing experiments on granite after
thermal treatment 16:00-16:08
A. Madyarov1, R.
PRIOUL2, A. Zutshi3, N.
Seprodi3, D. Groves3, J.
Pei1, S. Wong4
Understanding the impact of completion designs on multi-stage
fracturing via block test experiments 16:08-16:16
D. Ji, S. Zhang, Y. Zou,
X. Ma, Z. Zhang, X.
Zhang, H. Song
Experimental study on Fracability and Hydraulic Fracture
Propagation Mechanism of Different lithological rocks
inTamulangou Formation
16:16-16:24
C. Baptista-Pereira, B.
Gon?alves da Silva
Acoustic emissions and source mechanisms observed in the
hydraulic fracturing of gypsum considering fluid diffusivity 16:24-16:32
A. Butt1, A. Hedayat1,
O. Moradian2
Acoustic Emission Source Mechanisms Evaluation of Hydraulically
Induced Fractures in Brittle Rocks 16:32-16:40
G. Biheri, A. Imqam Experimental Study: High Viscosity Friction Reducer Fracture
Fluid Rheological Advantages Over the Guar Linear Gel 16:40-16:48
3.4.F
Constitutive behavior
in geomechanics:
experiments,
simulations, and
applications
X. Yu1, J. Kemeny1, W.
Song2
Progressive Fracturing of Rock/Backfill Specimens under Triaxial
Compression - Experiments and Modeling 16:00-16:08
M. Sisodiya, Y. Zhang A directional micro-crack damage theory for rate-dependent
deformation and failure of brittle rocks 16:08-16:16
J. Choo1, S. J.
Semnani2, J. A. White3,
H. Sone4
Anisotropic creep in shale gas reservoir rocks: Impacts of
constitutive behavior on field-scale deformations 16:16-16:24
M. Talukdar1, H.
Sone1, W. Griffith2
Viscoplastic modeling of elastic and creep deformation of fractured
Berea Sandstone 16:24-16:32
B. Euser1, E. Rougier1,
C. M. Donahue1, L.
Beardslee1, R. A.
Guyer2, P. A. Johnson1
Simulating acoustic signatures associated with fluid flow through
porous media 16:32-16:40
J. C. Acosta1, M. E.
Curtis1, W. Wick2, C. H.
Sondergeld1, C. S. Rai1
Study of Creep Behavior in Barnett Shale using Nanoindentation 16:40-16:48
4.1.B Mining Innovations
and Ground Control
R. Yang
AN INTEGRAL SYSTEM FOR MONITORING AND
MODELING OF ROCK FRAGMENTATION AND BLAST
VIBRATION
13:00-13:08
M. E. Matlou1, R.
Mitra2
Strategy to maintain consistency of backfill strength and improve
backfill performance underground. 13:08-13:16
P. P. Nelson Glass from Mine Waste and Tailings 13:16-13:24
J. Oke, K. Kalenchuk,
A. Perry
Support Design Considerations for Mining in Very Poor Rock
Conditions 13:24-13:32
L. Fahle1, P. Carney2, S.
Schiele2, G. Walton1, E.
Holley1
Evaluation of SLAM-Based Mobile LiDAR Data Quality and
Workflows for Mine-Wide Underground Geotechnical Monitoring 13:32-13:40
B. Forbes1, N.
Vlachopoulos2, M. S.
Diederichs3
Coaxial load development along grouted plain strand cables 13:40-13:48
4.1.C Experimental Rock
Mechanics /
H. El Fil, L. J. Pyrak-
Nolte, A. Bobet
Transmitted, Reflected, and Converted Modes of Seismic
Precursors to Shear Failure of Rock Discontinuities 13:00-13:08
Advances in Rock
Testing 2 O. Aydan
How to select shear load in direct shear tests due toearthquakes and
its utilization in shaking tables for directshear test on rock
discontinuities and interfaces
13:08-13:16
O. Aydan1, S. Kodate1,
J. Tomiyama1, Y. Suda1,
N. Iwata2
Experiments on bonding characteristics of rockbolts/rockanchors
under shock loads 13:16-13:24
D. Morad1, A. Sagy2, Y.
H. Hatzor1
Frictional instabilities in direct shear experiments under different
displacement control modes 13:24-13:32
Z. Lei1, P. G. Ranjith2,
B. Wu1, R. V. De Silva2
Investigation of the fracture performance of soundless cracking
demolition agents (SCDA) in different reservoir rocks 13:32-13:40
K. Han, L. J. Pyrak-
Nolte, A. Bobet Experimental Investigation of Rock Saturation Determination 13:40-13:48
4.1.D
Characterization -
Novel techniques for
Geomechanics 3
J. E. Elkhoury1, Q. K.
Elias1, T. Berard2, E.
Peryet3, R. Prioul1
Static elastic properties assessment with pressuremeter testing 13:00-13:08
B. A. Verberne, L. M.
Kleipool, A. Van der
Linden, F. Marcelis, S.
Hol, C. Taberner, A.
Makurat
The effect of stress on the acoustic properties of carbonate rocks 13:08-13:16
S. Wu1, H. Ge2, T. lI3,
X. Wang2, K. Gao1
Characterization and quantitative evaluation of hydraulic fracture
network based on acoustic emission monitoring 13:16-13:24
S. J. Bauer1, C.
Choens1, W. Kibikas1, E.
Shalev2, V. Lyakhovsky2
Characterization and borehole analysis of the Ghareb formation for
nuclear waste disposal 13:24-13:32
C. Onwumelu1, I.
Bouchakour1, S. H.
Nordeng1, O. Kolawole2
Analyses of Source Rock Microstructural and Elastic Properties:
Case Study on Bakken Shales 13:32-13:40
X. Hu1, M. Chen1, H.
Liu2, B. Zhou2, Y. Lu1
Experimental study on effect of particle content on mechanical
properties of conglomerate 13:40-13:48
4.1.E
Hydraulic Fracture
Modeling-
Applications and
Case Studies
G. Izadi1, C. Barton1, T.
Llobet1, T. Pessoa1, I.
McGlynn1, F. Walles1,
M. Friedrichs1, A.
Fernandez1, J. Mathieu2,
A. Onaisi2, H. Pourpak
A Case Study Using Integrated Multi-Disciplinary Approach to
Predict Reservoir Performance in the Vaca Muerta Gas Shales
13:00-13:08
J. Li, Y. Li, K. Wu An efficient higher order displacement discontinuity method with
joint element for hydraulic fracturing modelling 13:08-13:16
J. Kahle, R. Suarez-
Rivera
Equivalent fracture modeling reduces run time, preserves high
confidence results, and allows exploring additional sensitivities to
improve reservoir production
13:16-13:24
P. Dharwadkar, D.
Sassen, R. Suarez-
Rivera
Optimizing Pressure History Matching with Ultra-Fast and High-
Fidelity Hydraulic Fracture Simulations: Defining Fluid Friction
Factors and Global Trends of In-situ Stress and Fluid Leakoff
13:24-13:32
H. Zhu1, C. Huang1, X.
Tang1, G. Zhou2, Y.
Liu2, X. Shan2, B.
Huang2
Numerical simulation of complex fractures propagation in thin
sand-shale interbeded formation: A case study of shale oil reservoir
in Shengli Oilfield
13:32-13:40
J. Kear1, E. Arjomand1,
A. Movassagh1, L.
Peeters2, D. Kasperczyk1
Spatial analysis approach to hydraulic fracturing risk assessment 13:40-13:48
4.1.F
Salt
systems/underground
storage in salt
S. Liu1, E. Yao1, Y.
Luo1, Y. Li1, F. Zhou1,
C. Yuan2
Study on Factors Influencing the Shrinkage of Swelled Deposits at
the Bottom of Salt Cavern Gas Storage 13:00-13:08
M. Hu, J. Rutqvist Microscale Mechanical Modeling of Granular Salt: Insights for
Creep 13:08-13:16
S. R. Sobolik, T. S. Ross Effect of the Addition of a Low Deviatoric Stress Mechanism to the
Analysis of Geomechanical Behavior of Oil Storage Caverns in Salt 13:16-13:24
E. Keffeler1, S.
Buchholz1, S. Sobolik2 Direct Shear Testing of Consolidated Artificial Clay Seams in Salt 13:24-13:32
C. Gu1, X. Li1, Y.
Feng1, K. Li2
Morphology Design and Stability Evaluation of Double-Well Gas
Storage Salt Cave 13:32-13:40
J. Dong1, G. Li1, T.
Liu1, J. Li1, Y. Zhang2
Stability Analysis of Underground-gas-storage Salt Cavern Based
on Similarity Criterion 13:40-13:48
4.2.B
Unconventionals
Posters: Hydraulic
Fracture Modeling /
New techniques in
HF
M. Wang1, M. Che1, Q.
Liu2, Y. Wang1, g. Zhu1
Optimization Approach for Determination of the Dosage of
Diversion Agents in Temporarily Plugging Fracturing of Shale
Using 3D Printing Fractures
14:00-14:50
Y. Hou1, Y. Peng1, Y.
Liu1, Z. Chen1, Z.
Quan2, J. Dong3
Comparison of bottomhole pressure acting modes between
conventional hydraulic fracturing and pulsating hydraulic fracturing
N. Zhu, J. W. Huang, L.
D. Gao
Study on Conductivity of the Etching Fracture via Surface Cross-
linked Acid
W. Sun1, Q. Li2, C.
Liu2, W. Yu3, Y. Gong4,
K. Sepehrnoori2
A Probabilistic Well Spacing Optimization Workflow for Shale Gas
Reservoirs with Natural Fractures
Y. Li1, F. He1, W. Yu2 Simulation of Temporary Plugging Effect in Hydraulic Fracturing
with Complex Natural Fractures
F. Tian1, X. Dai1, Z.
Huang1, L. Shi1, M.
Sheng1, Y. Yan2
Principle and field test of hydraulic jet multi-cluster volume
fracturing in thin interbeds
A. A. Alsubaih1, H.
Swadi2
Trenchant Sensitive And Uncertainty Analyses To Enhance
Hydraulic Fracturing Design
Z. Zhang, S. Zhang, Y.
Zou, X. Ma
Experimental Investigation of the Interaction Between Hydraulic
Fracture and Natural Fracture in Naturally Fractured Reservoirs
Y. Tian1, F. Zhou1, B.
Li1, D. Zhou2, W. Tuo3,
Q. Chen3
Preparation of High Performance Mortar Under High Temperature
and High Stress to Simulate Ultra-deep Reservoir Rock
X. Bian1, H. Wang1, J.
Zhou1, T. Jiang1, D.
Wang2
A new method to evaluate shale fracability and Fracture Complex
Index in Shale gas Play
H. Han1, Y. Guo2 Study on influencing factors of fracture propagation in tight
sandstone of Qiulin block
4.2.C
Interdisiplinary
Posters: Constitutive
modeling / Multi-
scale characterization
Z. Li1, Y. Wu1, J. Jiao1,
R. Xie1, Q. Yu2, H.
Zhang2
Study on Rock Damage Mechanism under Shock Wave Loading of
Underwater Explosion
14:00-14:50
J. Qin, X. Pang, Z.
Zhang, K. G. Fikeni
Multiscale characterization of oilwell cement cured under HPHT
conditions
L. Liu1, H. Li1, D. Wu1,
J. Zhou1, S. Fu1, X. Li2
Mechanical characteristics and failure process of fractured rocks
with a single pre-existing flaw: DEM simulation based on discrete
fracture network
Z. Cheng, B. Damjanac Extension of Mohr-Coulomb Model Considering Opening and
Closure of Tension Cracks
S. Govindarajan, M.
Aldin, A. Guedez, A.
Thombare, D. Gokaraju,
A. Mitra, R. Patterson
Experimental investigation for selection of unloading criterion in
Multistage Triaxial Testing
Q. Yu1, H. Zhang1, A.
Chen2, J. Liu2
Feature Analysis for Rock Cumulative Damage under Cyclic
nderwater Explosion Loading
E. Norouzi, B. Li, E.
Erkmen
Computational homogenization to identify elastic properties of soil-
rock mixtures at normal and freezing temperatures.
B. Carrera1, C. Mok1,
S. Richardson2, J.
Devlin3, B. Heyer3, T.
Osorno3, M. Schofield2,
D. Hart2, C. Sorensen4
Comparison of Seepage Velocity Measurement Methods in
Fractured Rock
F. Molaei, J. Kemeny Investigation of Stress Corrosion Cracking in rocks, a reactive
molecular dynamic simulation
A. Abes1, D. Irofti1, G.
E. Ifrene1, V. Rasouli1,
S. Djemai2
The Impact of Geometric Attributes of Fractures on Fluid Flow
Characteristics of Reservoir: A Case Study in Alrar Field, Algeria.
V. Nachev, N. Dubinya,
S. Tikhotski
Numerical Modeling of Bottom Soil Sampling Performed to Study
Their Mechanical Properties
G. Awegori1, G. Luo1,
C. Grider1, A. Katende1,
M. Radonjic1, C.
Doughty2, N. Spycher2,
T. J. Paronish3, L.
O'Connell4, A. Rihn4
Fracturing Fluid-Induced Mineralogy Changes and Impact on
Elastic Properties for the Caney Shale, Oklahoma
C. Wang, L. Jiang, A.
Bobet, L. J. Pyrak-Nolte
Modeling Tensile Fracture in Layered Rocks with Oriented Mineral
Textures
4.2.D
Conventionals
Posters: Production /
Drilling
M. Yan1, J. Deng1, D.
Tian1, B. Yu1, Z. Chen2,
Q. Xiao
Preparation of synthetic sandstones with weak to moderate strength
for sand production experiments
14:00-14:50
X. Xie, P. Cerasi Impact of fault on CO2 reservoir integrity under depletion and
pressurization
A. E. Radwan1, S. Sen2 Stress Path Analysis Of The Depleted Miocene Clastic Reservoirs
In The El Morgan Oil Field, Offshore Egypt
F. Gao, K. Sun, F. Zhu,
C. Sun
Cementing technical solutions for long-term isolation ofnational
underground gas storage (UGS) project
N. Nik Kamaruddin, K.
Ging Ern
Facilitating Well Planning and Design for Water Injection with 4D
Geomechanical Modelling
D. Childers, X. Wu Mitigating Fault Activation from Injection Activity through the
Application of the Connected Reservoir Storage Model
F. O. Shammam, H. H.
Alkinani, A. T. Al-
Hameedi, S. Dunn-
Norman, M. A. Al-
Alwani
Assessment of the Production Gain from Refractured Wells in the
Major Shale Plays in the United States
O. Hamid, O. Hamid Horizontal Stress Rotation due to reservoir depletion
F. B. Fernandes1, A. B.
Barreto Jr.1, A. M.
Braga1, A. C. Soares2
Integral Solution for Nonlinear Oil Flow Near a Sealing Fault Using
Green's Functions (GFs)
Q. Ou, J. Yang, Z.
Zhang, L. Liu, X. Qu, Y.
Hong
Prediction of high-temperature and high-pressure well sand
production in the DF gas field
A. Tiwari1, N. Huerta2 Impact of Tectonic Stress Regime and Well Orientation on Failure
of Cement in Wells
J. Braga1, S. Fontoura1,
D. Melo1, L. Almeida2
Pre-Salt numerical analysis in casing integrity considering the main
events during the well life span
4.2.E
Unconventionals
Posters: General
Considerations
G. Li1, L. Tao2, Y. Zhao A new approach for multi-fractured horizontal wells productivity
prediction in tight oil reservoirs
14:00-14:50
M. Li, F. Zhou, G.
Huang, X. Hu
Development and Application of the Fluid Pipe Element in Multi-
fracture Propagation Simulation in Horizontal Wells
Y. Peng1, J. Huang1, J.
Liu2, Y. Hou1, X. Xu1,
G. Zhang1
Impact of complicated pore shape on permeability stress-sensitivity
analyzed by machine learning method
R. Weijermars, J.
Wang
Microseismicity and Dry Shear-Slip in the Stimulated
Rock Volume during Fracture Treatment in Shale Wells:
Analyzing Data from the Hydraulic Fracture Test Site (Permian
Basin) with the Linear Superposition Method (LSM)
Q. Xu1, G. Zhang1, B.
Ma2
Effects of a non-uniform distribution of pore pressure on fracture
propagation in multi-stage fracturing
X. Nailing1, X. Yun1, C.
feng2, Y. Yuzhong1, C.
bo1, L. Tiancheng1, F.
haifeng1
Characterization Method Research on Stimulation of Shale Gas
Reservoirs
X. Bian, S. Ding, T.
Jiang, H. Wang, Y. Su
A Comprehensive Method to Reevaluate Shale Reservoir
Characteristics and Fracture Geometry??A Post-frac Case Well in
China
s. feizi masouleh, A.
Ghassemi
Poroelastic Response of a Fracture in Rock with Two immiscible
Fluids
4.2.F
Interdisiplinary
Posters: General
considerations
C. Jia1, K. Sepehrnoori2,
J. Yao1
Numerical Studies and Analysis on Reactive Flow in Matrix
Acidizing Coupled Thermal-Hydrological-Mechanical-Chemical
Processes
14:00-14:50
N. Zhu, J. W. Huang,
L. D. Gao
The Hydraulic Effect of Tool Joints on Open hole Extended-reach
Limit Model
C. Zhou1, L. Li1, R.
Zeng1, Y. Wang1, W.
Chen1, H. Peng1, Q. Hu1,
Y. Dai2
Experimental study on true triaxial fracturing of tight volcanic
reservoirs
S. Maxwell1, S.
Alhashwa2, D. Bonar2,
A. Greig2
Hydraulic Fracturing Controls on Induced Seismicity
Y. Zhang, T. Tian, F.
Xu, X. Song, W. Wang
Numerical simulation of the rotating water jet flushing the insoluble
particles in the salt cavern underground gas storage based on DPM
model
R. Cai1, H. Ma1, C.
Yang1, K. Zhao1, X.
Liang1, Y. Han2
Research on the issue of NaCl carried by compressed air during the
injection and withdrawal process in CAES system
Z. Chen, H. Yu Seismic Analysis of a Deep Buried Underground Storage Cavern
with Large Span in Rock
l. ao Real-time prediction and optimization of drilling parameters based
on long and short term memory artificial neural network (LSTM)
M. An1, F. Zhang1, D.
Elsworth2
HPHT Fault Gouge Friction Experiments: Implication for Hydraulic
Fracturing Induced Seismicity in the Sichuan Basin
K. Adisornsupawat Dynamic Response of Rock on Potential Leakage of Fault and
Caprock Due to CO2 Injection :A Case Study from South East Asia
W. Li Study on heat transfer characteristics for fluid flow in porous media
based on Lattice Boltzmann Method
A. Sharma1, M. Al
Dushaishi2, R. Nygaard1 Fixed bit rotary drilling failure criteria effect on drilling vibration
Z. Wang, J. Yao, H.
Sun, L. Liu, X. Yan
Coupled Thermal-Reactive Flow Simulation of In-situ Conversion
Process in 3D Low-Mid Maturity Shale Oil Reservoir
Keynote Matt Pierce 14:50-15:50
4.4.B
Geothermal
Simulations and
General Geothermal
Considerations 2
M. L. McLean, D. N.
Espinoza
Depth dependent thermo-poro-elastic response of geothermal
reservoirs during heat extraction 16:00-16:08
H. Sun1, W. Yu2, K.
Wu3, K. Sepehrnoori1, J.
Miao2
A Powerful Thermal-EDFM for Modeling Enhanced Geothermal
System with 3D Complex Fracture Networks 16:08-16:16
V. A. Jimenez, J.
Renner
Injectivity Enhancement of Freiberg Gneiss by Hydraulic
Stimulation 16:24-16:32
J. Furtney1, B.
Damjanac1, R. Le Goc2,
C. Darcel2
Three-dimensional explicit fracture representation to better
understand thermo-hydro-mechanical effects in enhanced
geothermal reservoirs
16:32-16:40
4.4.C
Production Decline
and Rock Mechanics:
Mechanisms &
Mitigation
X. Zhou1, S. Liu2, Y.
Zhang1
Predicting permeability change of fractured coals during methane
depletion 16:00-16:08
Y. Wang, F. Zhou, L.
Zhang, W. Jin, H. Qu, E.
Yao
EXPERIMENTAL INVESTIGATION ON STRESS
SENSITIVITY BEHAVIOR FOR TIGHT NATURALLY
FRACTURED SANDSTONE RESERVOIRS
16:08-16:16
R. Zhang1, W. Yu2, M.
Fiallos Torres2, K.
Sepehrnoori1
Comparison of Simulation Results of EDFM and LGR for
Modeling Fractures in Shale Reservoirs 16:16-16:24
Y. Zhao1, H. Yang2, J.
Wu2, C. Chang2, C.
Choke Management Optimization for Shale Gas Reservoirswith
EDFM 16:24-16:32
Liu1, W. Yu3, N. Li3, K.
Sepehrnoori1
Y. Liu1, H. Zhu2, Z.
Chen3
4D geomechanics evolution simulation of coal reservoir and it's
application for refracturing well selection 16:32-16:40
W. Yu1, R. Yong2, J.
Wu2, C. Chang2, C. Liu3,
J. Leines Artieda1, M.
Fiallos Torres1, J. Miao1,
K. Sepehrnoori3
Investigation of Complex Natural Fracture Connectivity on Well
Performance using EDFM 16:40-16:48
4.4.D
Field scale
compaction,
subsidence, casing
deformation
z. chen1, h. zhang2, x.
zhou3, h. cao2
Micro-seismic characteristics of Shale gas Wells with casing
deformation in Sichuan 16:00-16:08
I. A. Pimentel, J. V.
Uribe, D. D. de Melo, S.
A. Fontoura, L. M.
Almeida
Casing Integrity Evaluation in Oil Wells Submitted to Subsidence
Loads 16:08-16:16
S. Zhang Geomechanical Causes of concentrated casing damage in CY
Oilfield and its Prevention measures 16:16-16:24
K. Liu1, Y. Zeng1, S.
Zhou1, Q. Tao1, J. Du1,
D. Gao2
Reasons and controlling of casing deformation in shale gas wells
during hydraulic fracturing process 16:24-16:32
M. R. Hajiabadi, F.
Amour, H. M. Nick
Estimating mechanical properties from sparse measured data in off
shore hydrocarbon reservoirs. 16:32-16:40
F. Amour, M. R.
Hajiabadi, H. M. Nick
Building a comprehensive geomechanical model for chalk
compaction. Phase 2: Predicting sea-floor subsidence for different
Danish reservoirs and production strategies
16:40-16:48
4.4.E
Geomechanics of
Hydraulic Fracture
Interference: Intra-
Stage, Intra-Well,
and Inter-Well
Z. Cui, B. Hou, S. Fu Numerical investigation on the influence of inter-well stress
interference on hydraulic fracture propagation in shale formation 16:00-16:08
J. He, Y. Pei, K.
Sepehrnoori
Impact of Stochastic Distribution of Hydraulic Fractures on Stress
Reorientation in Shale Gas Reservoirs 16:08-16:16
D. Kumar, A. Ghassemi Analysis of "Frac-hits" in Stacked and Staggered Horizontal Wells 16:16-16:24
W. Ma, I. Tomac Combined Effect of Fluid Viscosity and Intersection Angle on
Proppant Transport through Intersected Fractures 16:24-16:32
C. Liu1, Z. Liu2, J.
Shen2, P. Zhang2, Y.
Wang3, Z. Yang3, W.
Yu4, K. Sepehrnoori5
Evaluation of Well Performance of Child Wells with Complex
Fracture Hits from Parent Wells 16:32-16:40
J. Zhang1, H. Ge1, H.
Meng1, Y. Shen1, X.
Wang1, Z. Yang1, S.
Wu2, J. Zhang3
Geomechanical Modeling of Fracture-to-Well Fracture-to-Fracture
and Well-to-Well Interference Caused by Production in Shale
Reservoirs
16:40-16:48
4.4.F
Multi-scale
characterization and
modeling of rock
heterogeneities
L. P. Frash, N. J.
Welch, M. Meng, W. Li,
J. Carey
A Scaling Relationship for Fracture Permeability after Slip 16:00-16:08
A. A. S?nchez Camus1,
R. Ramos2, C. Rotili3
Integral characterization of the Vaca Muerta formation. 3-D
numerical modeling of the complete cycle of a vertical well located
in the oil generation window.
16:08-16:16
L. Jiang1, H. Yoon2, A.
Bobet3, L. J. Pyrak-
Nolte1
Fracture Formation in Layered Synthetic Rocks with Oriented
Mineral Fabric under Mixed Mode I and II Loading Conditions 16:16-16:24
N. C. Ferreira1, D. L.
Domingues1, J. P. de
Oliveira1, J. N. da Cruz1,
M. C. Fernandes1, S. B.
da Fontoura1, R. Dias2,
C. d. Goncalves2
Identification of unconsolidated geobodies in ultra-deep water,
Eastern Brazilian margin, using seismic attributes and well logs 16:24-16:32
K. Yoshioka1, M.
Mollaali1, G. Mishaan2,
R. Makhnenko2, F.
Parisio3
Grain size impacts on the fracture nucleation in rock 16:32-16:40
R. Alcalde1, B.
Nemeth2, E. Araujo1
Geomechanical Impacts and Characterization of Collapse Breccia
Pipes in Brine Injection Operations 16:40-16:48
5.1.B DFN and longwall
geomechanics
P. Zhang, D. Su FLAC3D modeling of gas well stability in longwall chain pillars
under shallow cover 13:00-13:08
W. H. Su, P. Zhang Engineering guidelines for shale gas wells influenced by longwall
mining 13:08-13:16
B. Kim, M. K. Larson
Numerical Assessment of the Anisotropic Strengths of a Utah Coal
considering the Spatial Characteristics of Discontinuities using
Discrete Fracture Networks
13:16-13:24
S. Ji, J. Karlov?ek Failure of Hard Roof Strata in Underground Mining and Its Control
Factors: An Analytical Model Study 13:24-13:32
Y. Zhang, N. Francois,
R. Henley, L. Knuefing,
M. Turner, M.
Knackstedt
3D quantification of microcracks and porosity with respect to brittle
failure 13:32-13:40
5.1.C
Experimental Rock
Mechanics /
Advances in Rock
Testing 3
A. Khan1, N. Zhang1, A.
Hedayat1, H. Bola?os
Sosa2
Evaluation of tensile strength and failure response of
geopolymerized rock waste using Brazilian tensile test and digital
image correlation techniques
13:00-13:08
L. Griffiths1, M.
Soldal2, H. M. Moreno1,
J. Park1, R. A. Victor3,
Fluid substitution and water weakening effects from core flooding
experiments on Berea sandstone 13:08-13:16
E. R. Ramos3, P. T.
Menezes3, J. L. Correa3,
M. A. Mane4
P. Garg, A. Hedayat, D.
Griffiths
Investigation of fracture process zone in Brittle rocks under Mode II
loading 13:16-13:24
F. T. Suorineni The design of a combined compression and shear test system for the
design of inclined pillars in underground mining 13:24-13:32
A. Moslehy, K. A.
Alshibli, T. J. Truster
Investigating Single-Crystal Rock Salt?s Mechanical Behavior
under Cyclic and Unloading-Reloading Loading Condition 13:32-13:40
G. Cui1, C. Zhang1, Z.
Zeng2, H. Zhou1, J. Lu1,
G. Cheng3
Mechanical behavior of bolted joints under CNS conditions 13:40-13:48
5.1.D
Reservoir - Complex
settings: structural,
heterogeneous,
deepwater, and salt
systems
S. Busetti
Comparison of Finite Element and Elastic Dislocation Methods for
Modeling Discrete Fault Stress Perturbations 13:00-13:08
S. Vidal-Gilbert1, L.
Barens2, A. Onaisi1, C.
Sorgi3
The Role of 3D Geomechanical Model Including Underburden To
Understand the Overburden 4D Signal, Elgin Franklin UK 13:08-13:16
S. Djezzar, A. Boualam Impact of natural Fractures on the Productivity of Lower Devonian
Reservoirs in the Reggane Basin Western Sahara, Algeria 13:16-13:24
W. Yu1, Y. Xing2, M.
Cheng2, P. Chen2, M.
Fiallos Torres1, Z. Mao1,
J. Miao1
Different Numerical Methods for Naturally Fractured Reservoir
Simulation with EDFM 13:24-13:32
T. Treffeisen, A. Henk
AI-Based Comparison and Upscaling of Detailed to Homogenized
Fault Zone Representations in Reservoir-Scale Hydro-Mechanical
Simulations
13:32-13:40
H. Hawez, R. Sanaee,
N. H. Faisal
Multiphase Flow Modelling in Fractured Reservoirs using a Novel
Computational Fluid Dynamics Approach 13:40-13:48
5.1.E
Unconventional
Hydraulic Fracturing,
New Techniques and
Applications - 1
S. Goyal, M. E. Curtis,
C. H. Sondergeld, C. S.
Rai
A Comparative Study of Monotonic and Cyclic Injection Hydraulic
Fracturing in Dry Tight Rocks Under Triaxial Stress 13:00-13:08
F. Altawati1, H. Emadi1,
R. Khalil2
Investigating Effects of Cryogenic Treatment on Rock and
Dynamic Elastic Properties of Eagle Ford Shale Rock Samples 13:08-13:16
h. zhang1, l. zou1, L.
Zhuo1, W. Bi1, b. li1, J.
Yu1, z. huang2
Experimental and Numerical Study on Transient Heat and Mass
Transfer of Cryogenic Fluid in Wellbore during Cryogenic
Fracturing
13:16-13:24
H. Chen1, G. Zhang1, Y.
Zhang2
Fracture propagation in conglomerate reservoir under hydraulic
pulse fracturing 13:24-13:32
A. M. Hassan1, M. A.
Mahmoud1, A. E. Al-
Majed1, A. R. Al-
Nakhli2
Reducing the Capillary Forces in Tight Gas Reservoirs Using
Thermochemical Fluids 13:32-13:40
C. Zhang Experimental Study of CO2Fracturing Behaviour in Ultralow
Permeability Formations 13:40-13:48
5.1.F Induced Seismicity
A. G. Muntendam-Bos Geomechanical characteristics of gas depletion induced seismicity
in The Netherlands 13:00-13:08
W. Cao1, S. Durucan1,
W. Cai1, J. Shi1, A.
Korre1, T. Ratouis2, V.
Hj?rleifsd?ttir2, B.
Sigf?sson2
Combining Microseismic Observations and Reservoir Simulation to
Interpret Fracture Criticality in Faults at the Hellishei?i Geothermal
Field, Iceland
13:08-13:16
W. Li, M. Alghannam,
R. Juanes
Experimental Study on the Seismic Behavior of Fault Gouge
Induced by Fluid Injection 13:16-13:24
R. Y. Makhnenko, N.
Bondarenko
Influence of the pore fluid type on the observation of induced
seismicity 13:24-13:32
W. Cai1, S. Durucan1,
W. Cao1, J. Shi1, A.
Korre1, V.
Hj?rleifsd?ttir2, T.
Ratouis2, B. Sigf?sson2
Seismic Response to Fluid Injection in Faulted Geothermal
Reservoirs: A Case Example from Iceland 13:32-13:40
R. O. Salvage, D. W.
Eaton How is induced seismicity affected by transitional stress regimes? 13:40-13:48
5.2.C
Machine Learning
and Artificial
Intelligence
applications for
petroleum reservoir
A. H. Ahmed, S. M.
Elkatatny, H. Gamal, A.
Abdulraheem
Bulk Density Prediction While Drilling Complex Lithology Using
Functional Networks Model 14:00-14:08
E. Zambrano1, V.
Soriano2, C. Olascoaga2,
S. Salehi3
Successful application of supervised machine learning algorithms
for proper identification of abnormal pressure zones in the Talara
Basin, Peru
14:08-14:16
A. A. Mahmoud, H.
Gamal, O. Siddig, S.
Elkatatny
Artificial Neural Networks-Based Equation for Real Time
Estimation of the Dynamic Young?s Modulus 14:16-14:24
H. Gamal, A. Abdelaal,
A. Alsaihati, S.
Elkatatny, A.
Abdulraheem
Intelligent prediction for the equivalent circulating density from
drilling data by employing artificial neural network 14:24-14:32
A. Abdelaal, S.
Elkatatny, A.
Abdulraheem
Real-Time Formation Pressure Prediction While Drilling from
Mechanical and Hydraulic Drilling Parameters Using Artificial
Neural Networks
14:32-14:40
F. A. Hadi1, R. Nygaard Data Driven In-Situ Sonic Log Synthesis in Carbonate Reservoirs 14:40-14:48
5.2.D
Production -
Geomechanics driven
production decline
A. N. Berntsen1, E.
Papamichos2, D.
Szewczyk1, L. E. Walle1
Productivity decline in partially propped perforations 14:00-14:08
E. PAPAMICHOS1, L.
Walle2, A. N. Berntsen2,
D. Szewczyk2
Sand rate from laboratory tests to field conditions 14:08-14:16
E. PAPAMICHOS1, A.
N. Berntsen2, L. Walle2 Chalk influx in hollow cylinders with artificial wormholes 14:16-14:24
A. Khaksar1, S. Asadi1,
M. Fabian2
Analytical Sand Production Prediction and Sand Volume
Estimation Calibrated with Field Data 14:24-14:32
A. Khaksar Comparison of Geomechanical Sanding Predictions at Early Field
Life with Subsequent Years of Production and Field Observations 14:32-14:40
C. Ma1, Y. Feng1, J.
Deng1, W. Wang2, S. Li1
Investigation of Prepacked Gravel Screen Via One-way CFD-DEM
Coupling Method 14:40-14:48
5.2.E
Unconventional
Hydraulic Fracturing,
New Techniques and
Applications - 2
E. ALAGOZ, M. M.
Sharma
Investigating Shale-Fluid Interaction and Its Effect on Proppant
Embedment Using NMR Techniques 14:00-14:08
P. Zhang, S. Tian, W.
Zhang, Y. Zhang
Numerical simulation of gas production from hydrate deposits with
radial jet drilling technology 14:08-14:16
J. Chen, R. Yang, Z.
Huang, X. Qin, W. Liu,
H. Wen, C. Hong, R.
Cong
Rock-breakage analysis for abrasive-rotating-jet used in horizontal
cavity completion of coalbed methane reservoirs 14:16-14:24
Q. Xu Biomimetic controllable adhesive proppant and slow release
hydraulic fracturing tracer 14:24-14:32
5.2.F
Nondestructive
evaluation in rock
mechanics
C. Tagawa1, S.
Nakashima1, Y.
Yoshizu2, H. Iseki3, K.
Kishida4
X-ray CT imaging of cement grouted rock and its segmentation
with machine learning algorithm 14:00-14:08
D. Martogi, S. Abedi Fracture formation of brittle materials from scratch test and phase
field modeling 14:08-14:16
Q. Xiong, J. C.
Hampton
Resistance to event population decrease in the non-locally triggered
rock fracture process in the presence of a large-scale flaw 14:16-14:24
R. E. Bird, A. Paluszny,
R. W. Zimmerman
Application of the Displacement Discontinuity Model to a finite
pulse wave impinging on a fracture 14:24-14:32
O. Kolawole Measurement of Geomechanical Properties: Comparison Between
Scratch Test and Uniaxial Compression Test Methods 14:32-14:40
Q. Xiong, J. C.
Hampton
What Percentage of Acoustic Emission Signals can be used for
Source Location Analysis in the Rock Fracture Process? 14:40-14:48
Keynote Hiroki Sone 14:50-15:50
5.4.B
Nonconventional
Geothermal
Applications
R. E. Robey1, J. Pope1,
O. Vorobiev2, S. Torres3,
M. Hargather3, J.
Kimberley3, D. Mann3
Lab Scale Study of Energetic Gas Stimulation in Engineered
Materials 16:00-16:08
W. Jin, R. Podgorney,
T. McLing, R. W.
Carlsen
Geothermal battery optimization using stochastic hydro-thermal
simulations and machine learning algorithms 16:08-16:16
H. P. Xie1, J. Wang1, J.
X. Liao1, X. T. Long1, B.
X. Li2, J. C. Ma3, C. B.
Li1
A novel in-situ power generator system for geothermal resources
without fluid extraction 16:16-16:24
N. Yang1, L. Li1, L.
Geng2, L. Han2
A multifunctional development model: geothermal as an energy
source to develop natural gas hydrate and generate power 16:24-16:32
P. Panja1, S. Green2, M.
Deo1, R. Allis3, R.
Newhart4, K. Kitz5, J.
Moore1, M. John1
Multi-Layer Reservoir Thermal Energy Storage in the Uinta Basin 16:32-16:40
5.4.C
Petroleum in Latin
America:
Conventional and
Unconventional
B. Espindola1, F. C.
Chiachiarelli1, S.
Nazdri2
Comparison Between 1D Isotropic and Anisotropic Geomechanical
Model, Applied to Vaca Muerta Shale for Safe Stability Windows
Prediction
16:00-16:08
F. C. Chiachiarelli, D.
E. Hryb, A. Diaz
Vazquez, E. Diaz
Impact of Wellbore Azimuth on Hydraulic Fracture Growth and
Initiation Pressure 16:08-16:16
E. Diaz1, D. E. Hryb2,
V. E. Merch?n Jaimes2,
M. L. Ciancio2
Geomechanical Characterization of a Prospective Reservoir for
Underground Gas Storage in Neuqu?n Basin, Neuqu?n Province,
Argentina.
16:16-16:24
M. Noya1, T. M. Pique1,
E. Camilion1, G.
Panizza1, J. Ramallo2,
M. Fuertes3, A.
Caneiro1, M. Floridia1,
C. G. Grasetti1, N.
Calaramo
An approach to mechanical proxy in shales using nanoindentation
and SEM/EDS - XRD composition in cutting samples 16:24-16:32
J. H. Forero, F. K.
Calvay, I. A. Pimentel,
S. A. Barreto da
Fontoura
Bayesian inference framework for predicting creep strain for
Brazilian carnallite and tachyhydrite evaporites rocks 16:32-16:40
5.4.D
Production - Injection
hazards, faults &
fractures stability and
reactivation
Z. Sun1, A. Garza2, R.
Salazar-Tio1, A. Fager1,
B. Crouse1
A Novel 3D Mechanical Earth Modeling of the Volve Field and Its
Application to Fault Stability Analysis 16:00-16:08
Y. Wei, Y. Feng, C.
Zhang, J. Deng
Numerical Investigation of Progressive Borehole Breakout in
Naturally Fractured Formations 16:08-16:16
M. Tran, B. Jha
Effect of geomechanical coupling and fracture mechanics on
permeability evolution and geomechanical stability of naturally
fractured deformable reservoirs
16:16-16:24
Y. Guo, G. Zhang, Y.
Lv Effect of Cyclic Fracturing on Reactivation of Natural Fractures 16:24-16:32
Z. Li, D. N. Espinoza,
M. T. Balhoff
Impact of Filter Cake on Initiation of Fluid-Driven Fractures in
Granular Media 16:32-16:40
X. Li, Z. Ding, C. Gu,
C. An, Y. Feng
Full-life-cycle analysis of cement sheath integrity in HPHT shale
formations 16:40-16:48
5.4.E
Fracture Diagnostics
and Surveillance:
New Technologies
and Methods
P. Moradi, K. Jeziorski,
C. Waltman, D. Angus Integrated Tiltmeter and Microseismic Fracture Mapping: A Revisit 16:00-16:08
J. Bruno1, H. Sun1, W.
Yu2, K. Sepehrnoori1
New Diagnostic Fracture Injection Test Model with Complex
Natural Fractures using Embedded Discrete Fracture Model 16:08-16:16
Y. Li1, J. Shen1, W. Yu2 Efficient Modeling Fracture Complexity in Shale Reservoirs with
EDFM and Structured Grids 16:16-16:24
M. Chen1, T. Guo1, Z.
Qu1, T. Zhou2, N. Li2
Numerical simulation of strain and strain rate evolution of optical
fiber in the observation well during multi-cluster fracturing 16:24-16:32
S. Dande1, D. Angus2 Fluid flow velocity and perforation cluster efficiency using fiber-
optics DAS data 16:32-16:40
Z. Zhao1, H. Yang2, J.
Wu2, C. Chang2, H.
Sun1, K. Sepehnoori1,
W. Yu3, M. Fiallos
Torres3
Fracture Diagnosis with Distributed Temperature Sensing Using
Thermal Embedded Discrete Fracture Model (EDFM)
16:40-16:48
5.4.F
Experiment,
modelling, and
machine Learning
applications in
geomechanics
Y. Ma1, H. Huang2
PROBING ROCK STRENGTH USING SCRATCH TEST:
EFFECT OF STRENGTH RATIO ON CRITICAL CUTTER
DEPTH
16:00-16:08
K. Chun1, J. Kemeny2 Machine learning approach to estimate the responses of
underground rock around excavations 16:08-16:16
M. MENG, L. Frash, B.
Carey, N. Welch, W. Li
Experimental study of CO2-brine transport along the casing-cement
interface 16:16-16:24
A. Silaev1, G. Walton1,
E. Lindenbach2, R.
Bearce2
Evaluation of Rock Joint Roughness Digitization and Shear
Strength Prediction Methods 16:24-16:32
M. I. Duda1, J. F.
Stenebr?ten2, R. M.
Holt1, A. M. Stroisz3
Effects of plastic deformation on poroelastic pore pressure
coefficients in Pierre II shale. 16:32-16:40
Y. Liu1, S. Liu1, Y.
Kang2
Nano-scale mechanical characterization of shale using
nanoindentation: an experiment work 16:40-16:48