service that works®€¦ · asme b18.31.5 tensile strength: 60,000psi material: steel plating:...

Grade 8 Hex Head Cap Screws with a hole drilled in the head (sometimes called safety bolts) are meant to be used with a safety wire to prevent loosening through vibration or other forces. (Safety Wire on pg. 3 of Hot Sheet)

The wire maintains tension and remains in place by being twisted around itself and attached to the bolt on one end and an anchor point (which could be another bolt) on the other end. This method, also called Wire Locking, is a highly visible and an easily inspectable indication that the fasteners are properly secured.

DRILLED HEAD GRADE 8 HEX HEAD CAP SCREWS NEW

See more Fastener products on page 2 of this Hot Sheet!

Drilled Head Cap Screws work with Stainless Steel Safety / Lock wire

featured on pg. 3

Part No Diameter Length077.00.14.34 1/4” 3/4”077.00.14.1 1/4” 1”077.00.14.112 1/4” 1-1/2”077.00.14.2 1/4” 2”077.00.14.212 1/4” 2-12”077.00.14.3 1/4” 3”077.00.516.1 5/16” 1”077.00.516.112 5/16” 1-1/2”077.00.516.2 5/16” 2”077.00.516.212 5/16” 2-12”077.00.516.3 5/16” 3”077.00.38.34 3/8” 3/4”077.00.38.1 3/8” 1”077.00.38.114 3/8” 1-1/4”077.00.38.112 3/8” 1-1/2”077.00.38.2 3/8” 2”077.00.38.212 3/8” 2-12”077.00.38.3 3/8” 3”077.00.716.112 7/16” 1-1/2”077.00.716.2 7/16” 2”077.00.716.212 7/16” 2-12”077.00.716.3 7/16” 3”077.00.716.4 7/16” 4”077.00.716.5 7/16” 5”077.00.12.1 1/2” 1”

Part No Diameter Length077.00.12.114 1/2” 1-1/4”077.00.12.112 1/2” 1-1/2”077.00.12.134 1/2” 1-3/4”077.00.12.2 1/2” 2”077.00.12.212 1/2” 2-12”077.00.12.3 1/2” 3”077.00.12.4 1/2” 4”077.00.12.5 1/2” 5”077.00.12.6 1/2” 6”077.00.12.612 1/2” 6-1/2”077.00.12.7.0 1/2” 7”077.00.916.2 9/16” 2”077.00.916.212 9/16” 2-12”077.00.916.3 9/16” 3”077.00.916.4 9/16” 4”077.00.916.5 9/16” 5”077.00.58.112 5/8” 1-1/2”077.00.58.2 5/8” 2”077.00.58.214 5/8” 2-1/4”077.00.58.212 5/8” 2-1/2”077.00.58.3 5/8” 3”077.00.58.312 5/8” 3-1/2”077.00.58.4 5/8” 4”077.00.58.412 5/8” 4-1/2”077.00.58.5 5/8” 5”

Part No Diameter Length077.00.34.112 3/4” 1-1/2”077.00.34.2 3/4” 2”077.00.34.212 3/4” 2-12”077.00.34.3 3/4” 3”077.00.34.312 3/4” 3-1/2”077.00.34.4 3/4” 4”077.00.34.412 3/4” 4-1/2”077.00.34.5 3/4” 5”077.00.34.6 3/4” 6”077.00.78.2 7/8” 2”077.00.78.212 7/8” 2-12”077.00.78.3 7/8” 3”077.00.78.4 7/8” 4”077.00.78.5 7/8” 5”077.00.78.6 7/8” 6”077.00.78.612 7/8” 6-1/2”077.00.1.212 1” 2-12”077.00.1.3 1” 3”077.00.1.314 1” 3-1/4”077.00.1.4 1” 4”077.00.1.5 1” 5”077.00.1.6 1” 6”077.00.1.7.0 1” 7”077.00.1.8 1” 8”077.00.1.9 1” 9”

You can download and print this issue on our website, for free!www.winzer.com/resource_center

SERV

ICE

THAT

WO

RKS®

PRODUCT HIGHLIGHTFasteners

Ed. 1

9 Vo

l. 11

Stay connected to us!

FASTENERS

Diameter D 5/8” 3/4” 7/8” 1” 1-1/4”Head Dia. A 1.024 1.181 1.402 1.575 2.008Square Width B .630 .760 .878 1.00 1.338Square Depth S .45 .47 .78 .57 .83

Tensile Strength: 170,000

Plating: Plain

170 PLOW BOLTS

Part No. Diameter LengthThread Length

232.17.58.2 5/8” 2” 1.38”232.17.58.214 5/8” 2-1/4” 1.61”232.17.58.212 5/8” 2-1/2” 1.65”232.17.58.3 5/8” 2-3/4” 1.73”232.17.58.312 5/8” 3-1/2” 1.81”232.17.34.2 3/4” 2” 1.13”232.17.34.212 3/4” 2-1/2” 1.13”


232.17.34.3 3/4” 3” 1.80”232.17.34.312 3/4” 3-1/2” 1.93”232.17.78.3 7/8” 3” 1.81”232.17.1.314 1” 3-1/4” 1.55”232.17.1.312 1” 3-1/2” 2.13”232.17.1.334 1” 3-3/4” 1.97”232.17.1.4 1” 4” 2.60”


232.17.114.334 1-1/4” 3-3/4” 1.70”232.17.114.4 1-1/4” 4” 2.00”232.17.114.412 1-1/4” 4-1/2” 2.44”232.17.114.5 1-1/4” 5” 2.95”232.17.114.6 1-1/4” 6” 3.75”

170 Stamped on head. Use with Grade 8 plain hex nuts.

Tensile Strength: Min 130,500Plating: Yellow Zinc

Diameter D M5 M6 M8 M10 M12Height H 5.4 6 5.1 9.2 8.7W.A.F F 8 10 13 15 17Flange Dia. A 8.71 10.95 14.26 22.3 24Pitch .80 1.0 1.25 1.5 1.75

Part No. DL

(mm) Class274.5.10 M5 10 90274.5.12 M5 12 90274.5.16 M5 16 90274.6.10 M6 10 90274.6.12 M6 12 90274.6.16 M6 16 90274.6.20 M6 20 90

Part No. DL

(mm) Class274.6.25 M6 25 90274.6.30 M6 30 90274.8.12 M8 12 90274.8.16 M8 16 90274.8.20 M8 20 90274.8.25 M8 25 90274.8.30 M8 30 90

METRIC TENSILOCK SERRATED HEX FLANGE SCREWS NEW

Part No. DL

(mm) Class274.8.35 M8 35 90274.8.40 M8 40 90274.10.25 M10 25 90274.10.30 M10 30 90274.10.35 M10 35 90274.10.40 M10 40 90274.10.45 M10 45 90

Part No. DL

(mm) Class274.10.50 M10 50 90274.12.25 M12 25 100274.12.30 M12 30 100274.12.35 M12 35 100274.12.40 M12 40 100274.12.50 M12 50 100

Diameter D 1/2” 5/8” 3/4” 7/8” 1”Head Dia. A .945 1.147 1.303 1.512 1.700Square Width B .515 .640 .765 .906 1.301Square Depth S .417 .506 .541 .626 .690

ANSI B18.3 1986

Proof Load PSI: 120,000Tensile Strength: 150,000Plating: Plain

GRADE 8 PLOW BOLTS


232.12.112 1/2” 1-1/2” 1-1/4”232.12.134 1/2” 1-3/4” 1-1/4”232.12.2 1/2” 2” 1-1/4”232.12.212 1/2” 2-1/2” 1-1/4”232.58.112 5/8” 1-1/2” 1-1/2”232.58.134 5/8” 1-3/4” 1-1/2”232.58.2 5/8” 2” 1-1/2”232.58.214 5/8” 2-1/4” 1-1/2”232.58.212 5/8” 2-1/2” 1-1/2”232.58.3 5/8” 3” 1-1/2”232.58.312 5/8” 3-1/2” 1-1/2”


232.58.4 5/8” 4” 1-1/2”232.58.412 5/8” 4-1/2” 1-1/2”232.34.2 3/4” 2” 1-3/4”232.34.214 3/4” 2-1/4” 1-3/4”232.34.212 3/4” 2-1/2” 1-3/4”232.34.234 3/4” 2-3/4” 1-3/4”232.34.3 3/4” 3” 1-3/4”232.34.312 3/4” 3-1/2” 1-3/4”232.34.4 3/4” 4” 1-3/4”232.34.412 3/4” 4-1/2” 1-3/4”232.78.212 7/8” 2-1/2” 2”


232.78.234 7/8” 2-3/4” 2”232.78.3 7/8” 3” 2”232.78.312 7/8” 3-1/2” 2”232.78.4 7/8” 4” 2”232.1.234 1” 2-3/4” 2-1/4”232.1.3 1” 3” 2-1/4”232.1.312 1” 3-1/2” 2-1/4”232.1.4 1” 4” 2-1/4”232.1.6 1” 6” 2-1/4”

1/2” diameter Grade 8 #3 Head Plow Bolts are furnished in the Flat Head design. All larger diameters are furnished in the dome head style.

ANSI B18.3 1986

Proof Load PSI: 85,000Tensile Strength: 120,000Plating: Zinc

Diameter D 3/8” 7/16” 1/2”Head Dia. A .708 .826 .945Square Width B .387 .450 .515Square Depth S .312 .364 .417

GRADE 5 PLOW BOLTS


233.38.1 3/8” 1” 1”233.38.114 3/8” 1-1/4” 1”233.38.112 3/8” 1-1/2” 1”233.38.134 3/8” 1-3/4” 1”233.38.2 3/8” 2” 1”233.38.212 3/8” 2-1/2” 1”233.716.114 7/16” 1-1/4” 1-1/8”


233.716.112 7/16” 1-1/2” 1-1/8”233.716.134 7/16” 1-3/4” 1-1/8”233.716.2 7/16” 2” 1-1/8”233.716.214 7/16” 2-1/4” 1-1/8”233.716.212 7/16” 2-1/2” 1-1/8”233.716.3 7/16” 3” 1-1/8”233.716.312 7/16” 3-1/2” 1-1/8”


233.12.2 1/2” 2” 1-1/4”233.12.214 1/2” 2-1/4” 1-1/4”233.12.212 1/2” 2-1/2” 1-1/4”233.12.3 1/2” 3” 1-1/4”233.12.312 1/2” 3-1/2” 1-1/4”233.12.4 1/2” 4” 1-1/4”

Grade 5 Plow Bolts are furnished in the Flat Head design.

2 Service That Works... Products That Perform

ELECTRICAL

FASTENERS (CONT.)

Part No. Size Description719.04061 4” x 6” Low-Beam719.04062 4” x 6” High-Beam

SEALED BEAM LED HEADLAMPS

This series is the perfect forward lighting solution for Fleets and Owner Operators alike. With 100% polycarbonate construction for the lens and body, the lights are ultra-light weight compared to traditional metal housings. The lenses are hard-coated with SILFORT UVH3000. All lamps have a built-in 3-pin male H4 connector.

• FMVSS-108 and CMVSS-108 compliant• SillFORT hard-coated lens• Polycarbonate lens and housing• Retrofits ANSI# H4656 and #H4651• 3 year warranty• LEDs: 5

• Voltage: Auto-select 12/24 VDC• Connector: 3 pin male H4• Dimensions: 6.6” x 4.2” x 3.4”• Amp Draw: 0.8A 12V / 0.4A 24V• Legal Heading: DOT L SAE HL• Lumens: 700 (Low-Beam) 750 (High-Beam)

NEW

Part No. ColorWire Range

BasicWire RangeMinimum

Wire RangeMaximum Industry #

553.10378 Gray 22-16 1 #20 w/ 1 #22 2 #16 71B553.10379 Blue 22-16 3 #22 3 #16 72B553.10380 Orange 22-14 3 #18 4 #16 w/ 1 #20 73B553.10381 Yellow 18-10 1 #14 w/ 1 #18 4 #14 74B553.10382 Red 18-10 2 #14 2 #10 w/ 2 #12 76B

• Color-coded• Made with flame retardant

thermoplastic and square wire spring to bite into the wires

WIRE CONNECTOR NUTS

SELF-IGNITING BUTANE TORCH

Part No.694.6735

• Piezo ignition/self-igniting torch• Refillable with butane• Safety lock• Continuous burning flame lock• 40-60 minutes of continuous use

• Can adjust flame intensity• Produces temperatures up to 2370° F• Pinpoint flame is perfect for soldering, de-soldering,

heat-shrinking and terminating, heating, lighting and many other applications

NEW

Part No. Diameter Length Packaging801.50399 .025” (.635mm) 595 ft 1 lb Dispenser801.50400 .032” (.81mm) 362 ft 1 lb Dispenser801.50401 .041” (1.04mm) 221 ft 1 lb Dispenser801.50402 .063” (1.60mm) 93 ft 1 lb Spool801.50403 .051” (1.30mm) 143 ft 1 lb Dispenser

STAINLESS STEEL SAFETY / LOCK WIRE

• Corrosion-resistant, soft-tempered wire used to secure nuts, bolts and hardware subject to vibration

• Dispenser is a convenient plastic container with a screw-on lid and belt clip• Can be used in temperatures up to 700° F (371° C)• Offers greater security than a cotter pin or lock washer

• Fully rechargeable• Tactical edge• Convex lens• 4x adjustable zoom• Fully dimmable• Memory power setting• Lock-out made to prevent accidental operation

• Anodized aircraft-grade aluminum• Water and impact-resistant• Powerful magnetic base• Battery charging indicator• Side-positioned ON/OFF button• Work light automatically turns on when opened• Uses 1 Li-ion rechargeable battery (3-4 hour recharge time)

• Micro USB to USB cable included• 0.8 lbs• Length: compacted 6.875” / extended 9”• Diameter: Head1.75” / Barrel 1.25”• US Patent: D 786,466 S

NEBO® SLYDE™ KING RECHARGEABLE FLASHLIGHT

Part No.715.9124

3Service That Works... Products That Perform

• Fast and deep penetration• High capillary action• Long-lasting lubrication time• Protects steel surfaces against salt and moisture• Loosens rusted bolts• Contains no CFCs• VOC compliant in California

Part No. 12 PackNet

WeightCanSize

891.7237 891.7237.1 11 oz (340 g) 16 fl oz

KREEPER LOW VOCPENETRATING LUBRICANT

BREAK-THRUNON-FLAMMABLE PENETRATING LUBRICANT

Part No. 12 PackNet

WeightCanSize

891.7235 891.7235.1 16 oz (454 g) 16 fl oz

• Clear penetrating lubricant and moisture displacer• Non-flammable and non-conductive• 30,000 volt dielectric strength (30 KV)• Protective lubricant prevents rust and corrosion• Powerful penetration of moisture and rusted parts• Drives off moisture; effective on dry or wet surfaces• Applications: Start wet engines, freeing nuts and bolts,

electrical panel boards, drying out ignition wires, parking meters, motors, wire cable, rusted parts, engines, machine parts, door hinges, locks, battery terminals, vending machines, refrigeration equipment, airplanes, laundromats

(Not for Sale or Use in California)

• Fast-acting heavy-duty degreaser• Removes grease, grime, oil and oil-based contaminants• Will not etch glass, aluminum or stainless steel• Non-flammable• Pleasant clean fragrance

Part No. 12 PackNet

WeightCanSize

991.103726 991.103726.1 19 oz (538 g) 20 fl oz

FASTBALL AEROSOLHEAVY-DUTY DEGREASER

• Bio-enzymatic floor cleaner and restorer• Cleans and restores grout• Superior performance• Attacks and eliminates greases and oils• Works on kitchen grease and other organic soils• Use on all hard surface floors• Long-term residual activity

Part No.Container

Size991.120258 1 gal

FORMULA 429FLOOR CLEANER AND BACTERIAL GREASE ELIMINATOR

NEW

CHEMICALS

ELECTRICAL (CONT.)

DESIGN• Water and impact-resistant• Ergonomic non-slip grip• Protective LED housing• Steel belt/pocket clip• Powerful magnetic base

SPECS• (H) 6.0625” x (W) 0.625” x (D) 1”• 0.2 lbs

BATTERIES• Powered by 3 AA batteries (included)

LIGHT• High-power 250 Lumen C•O•B LED work light• High-power C•O•B LED emergency red flasher

U.S. PATENT• 8,628,210

Part No.715.2686

LIL LARRY™ POWER POCKET LIGHT

DESIGN• Anodized aircraft-grade aluminum• Water and impact-resistant• Powerful magnetic base

OPERATION• Top-positioned, ON/OFF button

SPECS• Length: 7.4375”• Diameter: Barrel 0.875” / Head 1.125”• 0.45 lbs

BATTERIES• Powered by 3 AA batteries (included)

LIGHT• High-power 400 lumen C•O•B LED work light• High-power C•O•B LED emergency red flasher

U.S. PATENT• 8,628,210

Part No.715.2685

BIG LARRY™ WORK LIGHT


SET CONTAINS:• Standard Sockets: 9mm, 10mm, 11mm, 12mm,

13mm, 14mm, 15mm, 16mm, 17mm, 19mm• Adapter: 3/8” female x 1/2” male• Universal Joint: 2”• Reversible Ratchet: 8”• Extension Bars: 3” and 6”

3/8” DRIVE METRIC 12 PT SOCKET SET — 15 PIECE

Part No.700.38.1000

SET CONTAINS:• Standard Sockets: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”,

11/16”, 3/4”, 13/16”, 7/8”, 1”• Adapter: 3/8” female x 1/2” male• Universal Joint: 2”• Reversible Ratchet: 8”• Extension Bars: 3” and 6”

3/8” DRIVE SAE 12 PT SOCKET SET —15 PIECE

Part No.700.38.1010

• High-grade metal component construction with chemical and shock-resistant plastics• Comfortable, attractive, anti-roll handle with rotating front collar for fine adjustment• Comes loaded with 6 commonly used industrial grade magnetic bits Phillips: PH1, PH2, PH3 Slotted: 1/8’’, 3/16’’, 1/4’’• No contact bit changes• Bit loads can be fully customized (1’’ length bits only)

DIAL-N-LOAD AUTO SCREWDRIVER

Part No.692.503

• Heavy-duty magnetic pick-up tool with a blue molded grip for comfort• Simply wave over ferrous material, then retract the pull rod to release• Perfect for picking up metal chips and shavings around machinery and work areas• Can be used for moving fasteners in and out of bins; hundreds of uses and applications

MAGNETIC PICK-UP TOOL

Part No.692.1700

Part No. Size OAL749.66.4702 1/4" 1-7/8"749.66.4703 5/16" 1-7/8"749.66.4705 3/8" 1-7/8"749.66.4706 7/16" 1-7/8"749.66.4732 1/4" 2-9/16"

• Proprietary steel and heat treat process for maximum strength and durability• Strong magnetic tip for secure grip

• Color-coded band for easy identification• Chamfered edge for improved clearance

1/4” SHANK MAGNETIC NUT DRIVERS

Part No. Size OAL749.66.4733 5/16" 2-9/16"749.66.4735 3/8" 2-9/16"749.66.4736 7/16" 2-9/16"749.66.4737 1/2” 2-9/16”749.66.4607 7mm 2-9/16”

Part No. Size OAL749.66.4608 8mm 2-9/16”749.66.4610 10mm 2-9/16”749.66.4612 12mm 2-9/16”749.66.4613 13mm 2-9/16”

• One-step cleaning• Disinfects in 1 minute• Virucidal, bactericidal, tuberculocidal, fungicidal

• Unscented• Bleach-free• EPA registered

Part No. Contents Towel Size860.3599 160 Pre-Moistened Wipes 6” x 6.75”

MICRODOT® MINUTE WIPE

• One-step, ready-to-use disinfectant, virucidal, germicidal, mildewstat, deodorizer and fungicidal product for cleaning, sanitizing and deodorizing hard, non-porous surfaces

• Kills HIV-1 (AIDS virus) on pre-cleaned surfaces• EPA registered• Ready-to-use; no dilution necessary• Controls cross-contamination on cleaned, hard non-porous surfaces

• Pleasant floral fragrance• For Use On: Formica, plastic, stainless steel, fiberglass, porcelain and other

hard surfaces not harmed by water• Applications: Hospitals and nursing homes, day care centers, physicians’

offices, schools, sports and recreational facilities, offices, airports, janitorial services, retail areas, convenience stores, public areas and many others

Part No. Package891.6851 1 Gallon891.6851.1 4 x 1 Gallons

GERM ASIDE RTU DISINFECTANT

CHEMICALS (CONT.)

SHOP SUPPLIES


• 1 each straight flute taps and hex die sizes: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-24, 7/16-20,1/2-13, 1/2-20 and 1/8-27

• 1 each pipe tap size: 1/8-27

• T-Handle tap wrenches: 0-1/4” and 3/16” - 1/2”• Straight handle tap wrench: #4 - 1/2”• Die stock, screw pitch gauge and screw driver• Supplied in sturdy red plastic case

• For heavy-duty use in sheet metal and other materials• Cuts clean, burr-free round holes • Patented tooth geometry prevents chip clogging when cutting steel,

sheet metal, or plastics• Arbor fits 3/8” and 1/2” drill chucks• Rotabroach® Kit Includes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16” 5/8” and 3/4” cutters,

arbor assembly, extra pilot, center punch, hex wrench and washers

Part No. Description Blair No.660.6100 Rotabroach Cutter Kit 11090660.6101 Rotabroach Arbor Assembly 11122660.6102 Rotabroach Pilot 11121660.6112 Rotabroach Cutter 5/16” 11104660.6114 Rotabroach Cutter 3/8” 11108660.6118 Rotabroach Cutter 7/16” 11112660.6120 Rotabroach Cutter 1/2” 11116660.6122 Rotabroach Cutter 9/16” 11120660.6123 Rotabroach Cutter 5/8” 11124660.6126 Rotabroach Cutter 3/4” 11132

• Unique lubricating products that assist in assembly and disassembly of threaded fasteners and connections• Provide the means to apply and control precise amount of lubrication while maintaining a clean, non-greasy assembly• Blended PTFE resin with metal flakes prevent seizing and galling • Provides protection from corrosion and dirt• Poly-Temp Copper: Reduces required torque, applies easily, seals tightly, overcomes high temperature seizing, protects against galvanic pitting; Temperature Range: -450° to 1800°F• Poly-Temp Nickel: Increased chemical resistance, extremely high temperature and harsh environments, made for stainless steel threads; Temperature Range: -450° to 2600°F

Part No. Size Description888.36136 1/2” x 600” Copper888.36336 1/2” x 600” Nickel

POLY-TEMP ANTI-SEIZE TAPE

Part No. Size867.02.6312 Medium867.02.6313 Large867.02.6314 X-Large

• Machine washable• Greatly reduces skin abrasions and cuts• Silicone strips on fingertips and palm for secure grip

PRO HANDLING GLOVE GREY MECHANICS SAFETY GLOVE BLACK


• Machine washable• Outstanding protection against knuckle injury• Padded palms perfect for use with pneumatic tools• Unparalleled comfort

MX’S SLIP ON GLOVE YELLOW


• Machine washable• Excellent dexterity and flexibility• Outstanding gripper power

SHOP SUPPLIES (CONT.)

CUTTING TOOLS

ROTABROACH® HOLE CUTTERS

• Restore external threads on studs, bolts, screws, plumbing pipe and pipe fittings

• Four different high carbon steel files available• Each file provides 4 to 8 different thread pitches

• Restores rusted or corroded fasteners• Doubles as a screw pitch gage• Length: 8-1/2” x 7/16”

Part No. File No. Thread Size662.20.1 1 11, 12, 13, 14, 16, 18, 20, 24 TPI662.20.2 2 9, 10, 12, 16, 20, 27, 28, 32 TPI662.20.8 8 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0mm

THREAD REPAIR FILE

40 PIECE SET, STRAIGHT FLUTE TAPS AND HEX DIES

Part No.661.24.5

Set contains:


AUTOMOTIVE

• Save time and money by eliminating the need to heat the wheel in temperatures below 40°F

• Cold weather adhesive wheel weight tape with closed cell foam• Low profile;1875” height, 1” width • .25 oz segments, 3 oz per strip, 52 strips per box, 624 segments per box• Steel with 5-year coating

Part No.828.121

1/4 OZ COLD WEATHER STEEL ADHESIVE WHEEL WEIGHT BOX

Part No.Per Ft.

HoseI.D.

HoseO.D.

WorkPress (PSI)

Min BurstPress (PSI)

Min BendRadius

GatesPart No.

Reel Qty/FT ± 10%

899.003.04.1 1/4” 0.57” 5,800 23,200 2.0 4 MXT 550899.003.06.1 3/8” 0.675” 4,800 19,200 2.5 6 MXT 400899.003.08.1 1/2” 0.795” 4,000 16,000 2.75 8 MXT 330899.003.10.1 5/8” 0.945” 3,625 14,500 3.0 10 MXT 220899.003.12.1 3/4” 1.08” 3,125 12,500 4.75 12 MXT 220899.003.16.1 1” 1.38” 2,400 9,600 6.0 16 MXT 165

• Recommended For: High-pressure hydraulic oil lines• Meets or exceeds SAE 100R16 and 100R17 dimension and performance• Tube: Black, oil resistant, synthetic rubber tube• Reinforcement: Braided high-tensile steel wire reinforcement

• Cover: Black, abrasion-resistant, synthetic rubber; meets MSHA flame resistance• Temperature Range: -40°F to +212°F (-40°C to +100°C)• Couplings: Mega-Crimp couplings

GATES® MEGASYS™ MXT ™— SAE 100R16 NEWFLUID POWER

Part No. Length848.9.16 16”848.9.17 17”848.9.18 18”848.9.19 19”848.9.20 20”

• Superior contact across entire blade• Adapts to your windshield’s shape• Cover protects from debris, ice and snow• Sleek aerodynamic design• Available in 16” thru 28” sizes

• Heavy-duty red heater hose offers longer life• Conducts more heat to the heater• Withstands greater underhood temperatures• EPDM (Ethylene Propylene Drene Monometer) inner liner and cover resist heat and fluids• Meets SAE 20R3 Class D2• 50’ rolls come in dispensing carton

Part No. I.D. Color893.50.1835 1/2” Red893.50.1836 5/8” Red893.50.1837 3/4” Red893.50.4916 1” Red

HEAVY-DUTY HEATER HOSE

• Tests ethylene glycol, dex cool and both hot and cold solutions• Temperature compensating• Wide Range: +32°F to -60°F• Fahrenheit and celsius scales

ANTI-FREEZE HYDROMETER

Part No.697.500

• Highest quality cleaner of its kind• Brush will not twist loose• Clean top terminals / top posts

• Great for battery cable ends• Ensures a great connection

TOP POST / BATTERY POST TERMINAL CLEANER

Part No.694.5005

Part No. Length848.9.21 21”848.9.22 22”848.9.24 24”848.9.26 26”848.9.28 28”

MICHELIN® CYCLONE™ HYBRID WIPER BLADES


• Extra-wide and tall compartments• Ideal for large parts like pipe fittings, tools, chemicals, 16 oz aerosol cans, etc.

Material: Cold-rolled steelFinish: Rust and acid-resistant baked enamel paintColor: Winzer BlueWidth: 33-3/4”Height: 23-7/8”Depth: 12”Weight: 36 lbsCompartments: 8” x 6-5/8” x 12”

LARGE 12 COMPARTMENT STORAGE BIN

Part No.953.512

LARGE 40 COMPARTMENT STORAGE BIN

(12” DEPTH)Width: 33-3/4”Height: 23-7/8”Weight: 50 lbsCompartments: 4” x 4-1/2” x 11-7/8”

(9” DEPTH)Width: 33-3/4” Height: 22-1/4” Weight: 40 lbsCompartments: 4” x 4-1/2” x 8-3/8”

Part No. Depth953.540 12” 953.5409 9”

• Many drawers for storing a multitude of unique parts• Ideal for smaller parts like bolts, terminals, washers, etc.

LARGE COMPARTMENT STORAGE BINS

4060 E Plano ParkwayPlano, Texas 75074800-527-4126www.winzer.comCopyright © 2019 Winzer

SERVICE TH

AT WO

RKS®

You can download and print this issue on our website, for free!www.winzer.com/resource_center Ed. 19 Vol. 11

service that works®€¦ · asme b18.31.5 tensile strength: 60,000psi material: steel plating:...

Documents