www.rss.jo

SERVICE CATALOGUE

About Us 1

Ab

ou

t RSS

About Us2

About Us

The Royal Scientific Society (RSS) is the largest applied research institution, consultancy, and technical support service provider

in Jordan and is a regional leader in the fields of science & technology.

RSS provides expert testing services via over 25 specialized locally & internationally accredited laboratories and prides itself on

offering both the public and private sectors a unique scientific resource and a wide range of project expertise. Supported by

more than 500 science specialists, researchers, technical support staff, highly skilled management, and faculty, the RSS has truly

become recognized as a local, regional and international research and development hub.

Born out of the great heart and spirit of His Majesty the Late King Hussein and HRH Prince Hassan in 1970, the Royal Scientific

Society has, since day one, aimed high to be the local and regional reference point of knowledge for science and technology

using modern engineering research as a base to power economic development and social progress.

RSS proactively guides, supports and strengthens large governmental research projects and commercial incubators for both

small and medium enterprises. Industrial firms contract RSS to assess potential impacts on the environment and to recommend

practical solutions to minimize and control pollutants. RSS conducts standardized laboratory inspections on many of the foods

and products consumed daily by Jordanians.

A wide range of products are continuously inspected & tested including: detergents, paints, textiles, paper products, lubricants,

industrial and medicinal gases, in addition to building materials to ensure conformity with national and international standards.

In order to ensure compliance with the Ministry of Health’s (MOH) mandatory equipment servicing requirements as well as

guarantee that all the equipment is in proper working order, the (MOH) contracts the RSS to manage, service and maintain the

Kingdom’s vast supply of medical equipment.

Since its inception, RSS has led by example. As an independent industry leader, RSS has been at the forefront of Jordanian

renewable energy development and research, from wind powered water pumps and aerial generators to solar water heater

panels and solar receptors.

With the vast expertise accumulated by the Society over the years, it has established itself as a pioneer within the broader

international scientific community. RSS laboratories enjoy close personal co-operative ties with local, regional, and international

scientific organizations.

At RSS being customer–centric simply means having an unwavering commitment to the people of Jordan. The RSS continuously

strives to improve its standing as a point of reference for scientific knowledge and technical awareness, where quality standards

and public health become equal and totally uncompromised. RSS is unequivocally committed to testing with guaranteed

accuracy, and is dedicated to research and development.

As Jordan’s business and industry march into a modern 21st century, The Royal Scientific Society is reaching out, building

credibility by providing unique services with distinction and preparing Jordan for all the challenges of tomorrow.

About Us 3

About Us4

Knowledge Sector

The Knowledge Sector’s role is to be the reference point for scientific knowledge and research

that best provides data and ideas to solve problems through a unique group of experts with

the highest levels of specification and world-class facilities and networks in the environment,

construction, industrial technology, and information technology fields.

Testing Sector

The Testing Sector is a leader in providing analytical testing services for the private and public

sector. For 40 years the testing sector at the RSS has been providing a wide scope of chemical

and physical testing in food, environment, industrial, mechanical, electrical and construction

material, and industrial products. The RSS laboratories are accredited by national and international

agencies such as UKAS and JAS according to ISO 17025 in order to produce reliable scientific

results for both the private and public sectors.

Quality Sector

The Quality Sector empowers the RSS to cope with the dynamic and ever-evolving nature of

international requirements with flexibility and efficiency. RSS Quality is considered the basis of

the Quality Infrastructure in Jordan and it includes: The Jordan National Metrology Institute

(JNMI), The Conformity Assessment Center and The Engineering Maintenance / Directorate of

Bio-medical Engineering.

Outreach Sector

The Outreach Sector exemplifies the heart & soul of all RSS activity with specific programmes

dealing with Jordan’s community affairs and linking to local industry, education, and international

networks on a non-commercial basis. The Outreach Sector fosters a diverse set of activities,

initiatives, and programmes such as; The National Campaign for Public Awareness of the Drivers

of Change, The Eco Tech Park, The IRADA programme for productivity enhancement, and the

Training Centre.

RSS Integrated Activities

About Us 5

Energy, Water and Environment Cluster (EWE) The Energy, Water & Environment Cluster is supported by several nationally and internationally accredited laboratories which are capable of providing high class analysis and measurements. The EWE Cluster provides technical services and consultations in addition to promoting the adoption of sound and best practices conforming to the concept of sustainable development. The EWE Cluster also delivers field energy, water and environmental measurement and analysis services.

Industrial and Economic Consultation Cluster (IEC)

In line with RSS vision to power socio-economic development, the Industrial and Economic Consultation Cluster aims to support and institutionalise research and development efforts. The Cluster is dedicated to scientific research, developing industrial related policies, and offering technical consultation within different industries. By boosting inventions, enriching local IPs, and encouraging knowledge transfer the Cluster focuses on meeting and exceeding satisfaction levels across the industry.

Construction and Urban Planning Cluster (CUP)

CUP Cluster is the leader in developing inter-related fields of applied research, architectural and structural design, testing, consultations, standard development, seismic analysis, specialised training and facilitating technology transfer. CUP Cluster aims to empower economic development through building excellence in local community development as well as establishing, monitoring and upgrading various construction and green building related codes of practice. In addition, CUP Cluster plays a pivotal role in the utilisation of knowledge and experience in socially responsible projects.

Information and Communication Technology (ICT) for Development Cluster

The Information and Communication Technology (ICT) for Development Cluster, is the main technical arm of the Royal Scientific Society, its role is to conduct R&D in ICT yielding to products for commercialisation locally, regionally, and internationally. ICT for Development aims to enhance the expertise of the ICT workforce though providing knowledge-based training courses, supporting and participating in ICT initiatives locally and regionally, along with serving the private and public sectors throughout Jordan providing consultations and developing ICT solutions.

Scientific Analysis,

Public Health & Safety

Public Awareness, Training,

Enterprise Creation,

& Social Development

Calibration, Conformity,

& Engineering Maintenance

Research, Consulting

& Projects

Energy, Water and Environment (EWE)

Industrial and Economic Consultations (IEC)

Construction and Urban Planning (CUP)

Information and Communication Technology (ICT) for Development

About Us6

7

Testin

g

TestingTestingTestingTestingServices

Testing8

Chemical LaboratoriesThe chemical laboratories have highly trained and qualified staff that

provide chemical and physical analyses for testing a wide range of raw

and finished products, including food, feedstuff, medical and industrial

gases, paint, fuel, mineral oils, textile, tobacco products, detergents, in

addition to industrial minerals and products. The testing analyses are

conducted in accordance with national and/or international standards.

Environmental LaboratoriesBio-safety and environmental chemical analysis are the main functions

of this laboratory providing environmental testing services in the fields

of water, wastewater, and soil. The environmental analysis provides

scientific data to environmental engineers and decision makers in

areas of risk assessment, environmental impact, and management of

hazardous waste in order to reduce environmental pollution and protect

the environment.

Mechanical LaboratoriesThe Metallography laboratory conducts mechanical and physical testing

on imported and locally produced metallic products such as steel and

alloys. The plastics and rubber laboratory conducts routine testing of

physical and thermal properties of polymeric materials and products in

accordance with national and international specifications.

MAIN TESTING LABORATORIES AT RSS

Testing 9

Non Destructive Testing Laboratories (NDTL)Specialised since 1975, the NDTL is one of the most dynamic laboratories at

the RSS. These laboratories provide technical expertise & training in the field

of NDT and welding.

Field and laboratory tests are conducted by NDTL to measure radioactive levels

in food and environmental samples as well as provide technical consultation

services and certification of NDT personnel for the industry in Jordan and the

region.

Construction & Material LaboratoriesThe construction and material laboratories conducts numerous physical

and chemical analyses on construction materials such as cement, concrete,

building components, insulation materials, ceramics, raw materials, soil,

asphalt, rocks and construction chemicals.

The laboratories operate under ISO 9000 certification and are accredited by

national and international accreditation agencies.

Water Efficiency LaboratoriesThe latest addition to the RSS laboratories provides water efficiency testing

services for a variety of plumbing and household kitchen & bathroom

appliances.

Testing10

Food Testing Services includes the following items:

Diary Products

Oil Products

Meet Products

Sugar Based Products

Canned Products

Beverages and Drinks

Salts

Corn Flakes and Potato chips

Olives & Pickles

Industrial Vinegar

Crude Oil

Feed

Pasta and Instant noodles

Egg Powder

Aluminum Phosphate

FOOD TESTING SERVICES

What we do:

Testing according to national and

international standards food products

Testing of radiation pollution

Testing of microbial contaminations

Microbiology Food Testing

Testing 11

What we do:

Testing of composition and physical

properties according to international

standards

Cigarettes Testing Services includes the following items:

Carbon monoxide

Nicotine

Moisture in tobacco

Draw resistance of cigarettes

Mesh size

Ash content

Nitrogen

Un-dissolved ash in acid for tobacco

Ratio of cigarette paper to the total weight of cigarette

excluding attached filter and filter paper

Apparent density of tobacco

The length of tobacco column

The circumference of the cigarettes

Loose Tobacco

Det. of invert sugar

Moisture Content

Silica Content

Tobacco / Carbohydrates

TOBACCO TESTING SERVICES

Testing12

What we do:

Testing according to national and international

standards of paints, emulsions, varnishes,

undercoats, primers for houses, roads and

cars. Testing of petroleum according to ASTM

Quality control agreements

Antifreeze Solvents Brake Fluid Hydraulic oils Gear oils

Automatic Transmission Fluid Mono or Multi grade Lubricating oils

Mineral Oils – Turbine oils Craft Oils Compressors Lubricating oils

Used oils Grease Petroleum Products Emulsion paints

Texture paint Gloss paint Flat alkyd based paints Titanium dioxide

Titan Painting Putty for Interior use Undercoat paint

Priming oil paints Cellulose glossy lacquer for vehicle

Spraying- lacquer general use Nitrocellulose primer surface

Road Marking paint Hot applied thermo plastic road marking material

Glass Beads Paint Thinner

Paints, Lacquers And Petroleum Derivatives Testing Services

Testing 13

Yarn, Fabric, Carpets

Paper, Tissue paper, Carbon paper, Board

Leather & matches

Includes the following items:What we do:

Testing according to national and

international standards of threads,

fabrics, carpets, rugs, leather sanitary

paper, towels, cartons and cardboard.

PAPER, LEATHER, TEXTILE AND FABRICS TESTING SERVICES

Testing14

What we do:

Testing most of pesticides formulation.

Testing of fruits and vegetables for

pesticides residues according to

international requirement

Pesticides-Winter and Summer agricultural Spraying oils

Pesticides Residues in Fruits and Vegetables.

Active-Ingredient without Specific Insecticide Storage Life

Active-Ingredients (more than one active ingredient) without Specific

Insecticide Storage Life

Physical Properties of Pesticide

Active-Ingredient with 14 days Insecticide Storage Life

Active-Ingredients (more than 1 active ingredient) with 14 days Insecticide

Storage Life

Solvent

Vitamins

Active-Ingredient without Specific FUNGICIDES Storage Life

Active-Ingredient with 14 days FUNGICIDES Storage Life

Polymers

Container Capacity for Aerosol Products

Active ingredient in Mat Products

Active ingredient in Aerosol Products

Determination of Aflatoxins in Feeds

Includes the following items:

PESTICIDES AND PESTICIDES RESIDUES TESTING SERVICES

Testing 15

What we do:

Testing of medical gases (oxygen,

nitros oxide), for purity and impurities.Medical Oxygen Gas

Medical Nitrous Oxide Gas

Medical Air Gas

Medical Nitrogen Gas

Medical Carbon Dioxide Gas

Industrial Oxygen Gas

Industrial Carbon Dioxide Gas

Industrial Nitrogen Gas

Halons

Freon

Acetylene

Includes the following items:

GASES TESTING SERVICES

Testing16

Soap Shampoo and Soap Carpet Shampoo Cars Shampoo

Detergent Powder Bleach Powder Glass Cleaner Liquid Dishwashing

Fabric Softener Liquid Soap All Purpose Synthetic Detergent

Drains Cleaner Sodium Hypochlorite Coconut mono diethanol amide

Texapon Alkyl Benzene Sulphonic Acid

Detergents Testing Services includes the following items:

Petroleum Jelly «Vaseline» Creams Hair Shampoo Hair Dye

Toothpaste Perfumes Hair Conditioner Disinfectants

Shaving Foam Shower Gel Shaving Cream Dead Sea Salts

Hair Oil Talc Powder Lipstick Deodorant Nail Polish Styling Gel

Cosmetics Testing Services includes the following items:

What we do:

Testing of chemical properties in addition

to microbial contamination

DETERGENTS AND COSMETICS TESTING SERVICES

Testing 17

Fertilizers

Feed (MCP and DCP)

Phosphate Rock

Fertilizers and Animals’ Feeds Testing Services includes

the following items:What we do:

Testing of chemical properties in addition

to microbial contamination

FERTILIZERS AND ANIMALS’ FEEDS TESTING SERVICES

Testing18

What we do:

Dimensional, Physical, mechanical,

chemical tests and microscopic

examination

Quality control of manufacturing processRebar Screws Ductile Pipes Welded & Non Welded Pipes Valves

Sheet Metal Household Gas Cylinders Fire Extinguishers Metal Wires

Twisted Wires Cables Aluminum Profiles Windows And Doors

Metal Cans Roadblocks And Bridge Sections Mixers of drinking water

Faucets Radiators heaters Water Heaters Cooking Pots

Razor Blades Metal Containers Copper Plates Sheet Metal

Metal Testing – Destructive Testing Services includes the

following items:

METAL TESTING – DESTRUCTIVE TESTING SERVICES

Testing 19

Forged Material

Weldments

Casted Materials

Welding

Thermography Testing

Metal Testing – Non Destructive Testing Services includes the following items:

What we do:

Testing and inspection of welding lines in

steel structures, pipelines and vessels.

Testing of manufacturing defects in cast

products

Supervising welding operations in major

projects

Qualification of welding procedures

Training of welding personnel

METAL TESTING – NON DESTRUCTIVE TESTING SERVICES

Testing20

Cooker Domestic

Boiler

Radiators

Solar Collectors

Kerosene Heater

Gas Heater

Gas regulators

Instant Gas Water Heaters

Thermal Testing Services includes the following items:What we do:

Testing of thermal efficiency of boilers,

radiators, solar heaters and domestic gas

appliances

THERMAL TESTING – DESTRUCTIVE TESTING SERVICES

Testing 21

Plastic & Rubber Testing Services includes the following items:

Water Polyethylene Pipes Polyvinyl chloride Pipes - 110mm Poly Ethylene Pipes

PPC Pipes PVC Water Pipes CPVC Pipes PVC Electrical Pipes Gloves

Plastic Joints Sponge Plastic Disposables Nylon Bags Garbage Bags

Rubber Rings for Cement Pipes Foam numbers Car Plates Holders

Baby Bottles ID Cards Air Pipes Water Plastic Pipes Water Rubber Pipes

Gas Pipes Plastic Containers Multi Layers Polyethylene Pipes Filters

Multi Layers Polyethylene Pipes Electrical Cables Tires Jerrycans

PLASTIC AND RUBBER TESTING SERVICES

What we do:

Physical, mechanical and thermal testing of

polymeric products

Quality control of manufacturing process

Testing22

What we do:

Physical, mechanical and thermal testing

of polymeric products

Quality control of manufacturing processFood Stuff (Radioactivity)

Detergents (Radioactivity)

Chemical Fertilizers (Radioactivity)

Phosphate (Radioactivity)

Water (Radioactivity)

Air Filters (Radioactivity)

Radiation Protection Testing Services includes the

following items:

RADIATION PROTECTION TESTING SERVICES

Testing 23

DESIGN AND MANUFACTURING SERVICES

What we do:

Reverse engineering

Design of moulds for the plastic

manufacturers and foundries

Testing of sand for foundry applications

Quality control agreements with foundries

Testing24

Water Density

Water Salinity

Water Settleable solids

Drinking Water

Instrumental Lab Testing Services

Microbiology Testing Services

Water Quality Testing Services includes the following items:What we do:

Reverse engineering

Design of moulds for the plastic

manufacturers and foundries

Testing of sand for foundry applications

Quality control agreements with foundries

WATER QUALITY TESTING SERVICES

Testing 25

What we do:

Testing of pollutants in air in field

Identifying the levels of specific air pollutants (such as SO2,

NOx, H2S, CO, Dust emission, Alkalines and Acids) emitted

from stationary sources (such as stacks and vents) via spot

measurements, and assess their levels according to national

and international standards.

Air Quality Testing Services includes:

AIR QUALITY TESTING SERVICES

Testing26

Cement & Gypsum

Gypsum

Fresh Concrete

Hardened Concrete

Terrazzo Tile

Interlock

Concrete Pipes

Kerb –stone

Bricks

Gypsum Board

Thermal Insulation Materials

Construction Chemicals

Tile Grout

Ceramic Tile Adhesive

Chemical Admixtures for Concrete

Air-Entraining Admixtures for Concrete

Chemical Admixtures for Use in

Producing Flowing Concrete

Concrete Repair Materials

Screed

Soil

Soil

Aggregate

Dimension stone

Asphalt mixtures & asphalt tiles

Waterproofing membrane

Ceramics and Glass Tile Grout

Ceramic Tiles

Sanitary fixtures

Glass

Roof Tiles

Road Markers

Wood

Cement

Cement

Portland Cement

White Cement

Construction Products Testing Services includes the following items:

What we do:

Conducting physical analysis on different

construction materials such as cement,

concrete, building components, insulation

materials, ceramics, aggregate, marble,

granite, soil, asphalt, rocks and construction

chemicals.

CONSTRUCTION PRODUCTS TESTING SERVICES

Testing 27

Regulators for sanitary taps

WC pans and suites

Filling and Flushing Valves

Water Efficiency Measurements Testing Services includes the following items:

What we do:

Conduct tests on all imported and

local manufactured sanitary fixtures,

fittings and appliances and Check

their compliance with the technical

requirements of the Jordanian Standards

and building codes.

Help in regulating and standardising the

sanitary products trade in Jordan.

Provide the necessary technical support

for the local importers and manufacturers.

WATER EFFICIENCY MEASUREMENTS TESTING SERVICES

Testing28

What we do:

Provides testing services for household and similar electrical appliances for general use which can be divided into:

Portable Household appliance: like vacuum-cleaners, Electrical Irons and kitchen appliances…etc

Stationary Household appliances: This group covers appliances that are either fixed to a support or weigh more than 18kg, for example washing machines, microwave ovens …etc

Cooling Appliances: cooling appliances include all appliances incorporating a compressor and cooling fluid, such as refrigerators and air-conditioners…etc

Household electrical appliances

Audio, video and similar electronic apparatus

Information technology equipment

Batteries

PVC insulated cables–Low voltage

Enclosures: Degrees of protection provided by enclosures against

ingress of dirt or against the ingress of water

Luminaires, lamps, lamp-holders and lighting chains

Ballasts and transformers

Plugs, socket-outlets and switches

Circuit breakers

Electric toys

Personal protective equipment

Electrical Consumer Products Testing Services includes the

following items:

ELECTRICAL CONSUMER PRODUCTS TESTING SERVICES

Quality 29

QualityQualityQuality

Qu

ality

QualityServices

Quality30

About JNMI

Jordan National Metrology Institute (JNMI) was established in 2006 under

the management of the Royal Scientific Society (RSS) according to the

signed authorization agreement between Jordan Institute for Standards

& Metrology (JISM), which is a governmental institute responsible for the

national system of measurement in Jordan, and RSS, which is the largest

applied research institution, consultation and technical service provider

in Jordan housing 38 specialized laboratories acting as technical arm for

JISM, providing metrological services since 1981.

JNMI is run and managed by the Royal Scientific Society, its functions and

activities is monitored by a steering committee composed of 10 members

chaired by General Director of Jordan Institute for Standards & Metrology

and members from Royal Scientific Society, Higher Council for Science and

Technology, Royal Jordanian Air Force, Jordan Accreditation Commission,

Jordan Chamber of Industry, Amman Chamber of Commerce and Jordan

Institute for Standards & Metrology.

JORDAN NATIONAL METROLOGY INSTITUTION

Quality 31

JNMI Functions

Realizing, Maintaining and ensuring the traceability of the National

Measurement Standards to International Standard.

Dissemination of national standards by providing metrological and calibration

services to reference standards that exist in the national laboratories and to

all scientific, industrial and legal sector.

Following up the scientific development that is related to the international

system of units and applying it.

Representing Jordan locally and internationally in all metrological activities.

Performing research in Metrology issues.

Conducting Training courses, Seminars and work shops in Metrology.

Participating in Inter-laboratory comparison programs on the local and

International level.

Providing consultancy to Government in the field of Metrology.

Calibration Services

Technical Support

Quality32

JNMI General Calibration Services Includes:

Electrical Measuring Equipment

RF / Frequency & Time Measuring Equipment

Temperature Measuring Equipment

Speed Measuring Equipment

Pressure Measuring Equipment

Length Measuring Equipment

Mass Measuring Equipment

Equipment Medical Test Measuring Equipment

Force Measuring Equipment

What We do

JNMI consists of 14 specialized national calibration

laboratories that contain the most accurate standards

in Jordan in fields of electrical, mechanical, physical

and biomedical; in addition to being considered

as the national reference and primary source for

all measurement and quality assurance in Jordan.

JNMI assures the adherence & traceability of these

standards to International Standards.

JNMI provides highly accurate metrological services of

measurement, calibration, training and consultations,

which are accepted locally and accredited

internationally. A wide variety of entities from public

and private sectors make use of the services offered by

JNMI thereby ensuring uniformity of all measurements

throughout Jordan, thus reaching the overall objective

of a better quality of life for the Jordanian citizens.

JNMI calibration laboratories are ISO 9001 certified

and accredited locally and internationally according

to International Standard ISO/IEC 17025 by German

Accreditation Dakks.

JNMI GENERAL CALIBRATION SERVICES

Quality 33

Electrical Measuring Equipment

Analog/ Digital Multimeter ( V/A/OHM )

Voltmeter

Ammeter

Power Supply V/A

Meggers / Earth Tester

Decade Variable Resistance

Resistance / Capacitance

Standard Reference resistance/ capacitance

Clamp On Meter

Decade Variable Capacitance

Current Injection Tester

Insulation tester

High voltage Tester /Probe

Over charge Life Tester

Battery Charger

DC or AC Calibrator

Trimming resistor

Multimeter Volt, Ampere, Resistance, Frequency,

Capacitance

Multimeter Volt, Ampere, Resistance, Frequency

Length Measuring Equipment

Caliper

Micrometer

Linear Scale

Dial Gauge

Filler gauge

Gauge Block

Precision standard Plate for each

Ruler

Measuring Tape

Mass Measuring Equipment

Balance

Moisturizer Balance with temperature

Weight

JNMI CALIBRATION SERVICES

Quality34

RF / Frequency & Time Measuring Equipment

Timer

Frequency Generator

Frequency / Sweep Oscillator

Oscilloscope

Function Generator

Frequency Counter

Spectrum Analyzer

RF Millivoltmeter

Level Meter

Attenuator

Power Meter

Power Sensor

RF Oscillator

Pressure Measuring Equipment

Barometer

Pressure Gauge

Pressure Transducer

Pressure Calibrator

Force Measuring Equipment

Force Machine Tension Base Scale

Force Machine Compression Base Scale

Force Load Cell / Proving Ring Tension

Force Load Cell / Proving Ring Compression

X-Y Recorder

Digital Force Gauge

Extensometer for

Hardness Tester

Impact Machine Base Scale

Miscellaneous Measuring Equipment

Hydrometer

Pipette

Any other Equipment can be calibrated upon Inspection

Quality 35

Temperature Measuring Equipment

Liquid In Glass thermometer

Thermocouple with Digital Read out

PRT with Digital Read out

Dial Analog thermometer

Temperature Calibrator

Dry well calibrator / Infrared Thermometer

Temp. & Hum. Recorder

Temperature Simulator

Heater Hot Plate For each Temp. Measurement Cell

Furnace

Drying Oven

Water Bath

Freezer

Refrigerator

Speed Measuring Equipment

Centrifuge / Tachometer

Equipment Medical Test Measuring Equipment

Defibrillator Analyzer

ESU Tester

CuffLink Patient Simulator

Infusion Pump Analyzer

ECG Simulator

Multiparameter Patient Simulator

Phototherapy Radiometer

Digital patient pressure Meter

Safety Analyzer

Tachometer

O2 Monitor

Sound Level Meter

Ventilator Tester

Digital KV Meter

US Wattmeter

X-Ray Mass Meter

Shortwave Therapy Analyzer

JNMI MEASURING EQUIPMENTS

Quality36

About Conformity Assessment Centre

The Conformity Assessment Centre (CAC) was established to provide

third party certification services including product certification,

personnel certification, and third party inspection services. CAC has

been able to build a robust reputation as a certification body in the local

and regional markets for its integrity, credibility and professionalism.

CAC is internationally accredited by the Hellenic Accreditation System

(ESYD) as per ISO/IEC Guide 65: General requirements for bodies

operating product certification systems and ISO/IEC 17024: Conformity

assessment - General requirements for bodies operating certification

of persons. Moreover, it is seeking international accreditation as a body

performing third party inspection according to ISO 17020.

CAC’s Main projects include: inspection of Liquefied Petroleum Gas

(LPG) installations in Jordan as an approved provider by the Ministry

of Mineral Resources and Energy, inspection of polyethylene pipes,

certification of local and regional Non Destructive Testing (NDT)

personnel, as well as various certification of various products for the

International Red Cross Committee. Furthermore, CAC is the only

party issuing the (Halal) conformity mark for food products in Jordan.

Providing conformity services including

inspection and certification of systems

and goods

What we do

CONFORMITY – (INSPECTION AND CERTIFICATION) SERVICES

Quality 37

About Engineering Maintenance

The Directorate of Bio-medical Engineering is responsible for all issues

concerning medical equipment related to Jordanian Ministry of Health

(MOH) Hospitals. The directorate includes 18 Peripheral workshops of

medical equipment at the MOH hospitals and one central workshop at the

directorate containing 10 specialized technical groups. It employs 200 bio-

medical engineers and technicians providing maintenance service for about

32,000 medical devices, 30 MOH hospitals, and 1000 Medical centres

providing them with remedial, preventative and inspection maintenance

services.

The Directorate also provides technical studies, specialized training and

senior-level consultations regarding medical equipment covering a wide

range of services like equipment evaluation, needs analysis, tenders &

bidding, evaluation of offers, supervision of new hospital establishments,

and contracts.

The Directorate is ISO 9001 certified and accredited as a collaborative centre

for the World Health Organization and has been recognized regionally with

The Dubai Award for Excellence.

Providing maintenance and consultation

services in fields of bio-medical equipment

What we do

ENGINEERING MAINTENANCE / BIO-MEDICAL ENGINEERING SERVICES

Quality38

EWE 39

Energy, Water & Environment EWE

EWEEWE

Energy, Water & Environment (EWE)

EW

E

Services

EWE40

Energy, Water, & Environment (EWE) is a

crucial scientific theme within RSS. This

important scientific theme is represented by

the EWE Cluster which provides technical

services and consultations in addition to

promoting the adoption of sound and

best practices conforming to the concept

of sustainable development. The EWE

Cluster also delivers field energy, water, and

environmental measurements and analysis

services and is fully supported by several

nationally and internationally accredited

laboratories and monitoring units which are

capable of providing high level analysis and

measurements.

About EWE Cluster Environmental Impact Assessment (EIA)

Environmental Auditing (EA)

Life cycle assessment (LCA)

Major Hazards Risk Analysis (MHRA)

Cleaner Production (CP)

Materials and waste management

Water Quality Studies (Monitoring & Assessment)

Water Demand Management

Wastewater reuse & greywater reuse

Bio Solids Reuse

Real Time Monitoring System (RTMS)

Studies and Consultations

Telemetry System

Cooperation with EC

Ambient air quality assessment

Assessment of air quality emitted from stationary sources

Assessment of air quality inside working areas

Assessment of indoor air quality

Assessment of air quality emitted from mobile sources

Assessment of pollen grains levels

EWE Cluster General Services

ENERGY, WATER AND ENVIRONMENT (EWE) CLUSTER SERVICES

EWE 41

Environmental Impact Assessment (EIA)

To study the overall environmental impacts for any project before establishing it. It is required by the Ministry of Environment and the funding agencies such as World Bank.

Environmental Auditing (EA)

A verification and evaluation process for industries to determine whether they conform with environmental laws and regulation. It is required by Ministry of Environment.

Life Cycle Assessment (LCA)

LCA is a methodology allowing analyzing all environmental burdens (consumption of natural resources, emissions to air, soil and water) of a product or service over its whole life cycle, i.e. production, processing, use and disposal.

Major Hazards Risk Analysis (MHRA)

MHRA is a preventive approach to assess the risk of major accidents having a dangerous impact on health, safety and environment beyond the boundaries of a plant. MHRA identifies scenarios, evaluates the impact on human health and the environment, determines the probabilities of occurrence of an incident and defines preventive or mitigation measures to reduce the residual risk.

Cleaner Production (CP)

CP is a continuous improvement of industrial processes, products and services to reduce the use of natural resources, to prevent - at the source - the pollution of air, water and land and to reduce waste generation - at the source - in order to minimize risks to human and the environment

EWE42

Materials and Waste Management

The management includes hazardous and non hazardous materials. Also, the management include building a computerized system.

Wastewater Reuse & Greywater Reuse

Undertake studies and applied projects to reuse the treated wastewater and greywater.

Water Quality Studies (Monitoring & Assessment)

To design a monitoring program taking into consideration all the factors that will affect the water quality in order to assess the

quality depending on its end use.

Bio Solids Reuse

undertake studies and applied projects to reuse the bio solids and study the effects on environmental elements.

Water Demand Management

Adaptation and implementation of a strategy to influence the water demand and usage of water in order to meet any of the

following objectives: economic efficiency, social development, social equity, environmental protection, sustainability of water supply

and services, and political acceptability.

Real Time Monitoring System (RTMS)

Managing, operating and maintaining of on line Water Quality monitoring system to ensure system sustainability.

EWE 43

Studies and Consultations

Water Quality data analysis and Water reuse.

Telemetry System

Consultation regarding Client server application (back up, operation and

management of the Telemetry System), Determination of the suitable

Data Transmission services (GPRS, Leased line, ADSL…etc) and Interface of

measuring devices with the PC application using Data Acquisition Cards.

Cooperation with EC

As an Environmental National Contact Point (NCP), we can provide services

regarding involvement in the European research projects related to water

issues.

Assessment Of Pollen Grains Levels

Identify levels of allergic pollen grains prevailing during different times and

seasons in different areas and geographic zones.

Ambient Air Quality Assessment

Assess the levels of specific air pollutants (such as SO2, NOx, H2S, CO,

TSP, PM10 and PM2.5) at the ambient air (outdoor) for long time (one

year and more) at fixed stations, and compare their levels to national and

international standards. Accordingly, recommendations are set to improve

the ambient air quality of the studied areas.

Assessment Of Air Quality Emitted From Stationary Sources

Identify the levels of specific air pollutants (such as SO2, NOx, H2S, CO,

Dust emission, Alkalines and Acids) emitted from stationary sources (such as

stacks and vents) via spot measurements, and assess their levels according

to national and international standards.

EWE44

Assessment Of Indoor Air Quality

Identify the levels of lightening, air change and of specific air pollutants

(such as Radon, CO, CO2, TVOCs, etc) for indoor air quality (inside houses

and schools) via short-term measurements, and assess their levels according

to international guidelines.

Assessment Of Air Quality Inside Working Areas

Identify the levels of specific air pollutants (such as SO2, NO2, H2S, TSP and

TVOCs) inside working areas via short-term measurements, and assess their

levels according to national and international standards.

Assessment Of Air Quality Emitted From Mobile Sources

Identify the levels of specific air pollutants (CO and HC (gasoline operated

vehicles) and opacity (Diesel operated machineries and vehicles), emitted

from mobile sources via spot measurements, and assess their levels

according to national and international standards.

Industrial & Economicn Consulting 45

Industrial & Economic Consulting

Industrial & Economic Consulting

Industrial & Economic Consultations

Services

Ind

ustria

l & E

con

om

ic

Co

nsu

lting

Industrial & Economicn Consulting46

The Industrial & Economic Consultation Cluster focuses on the following fields;

Consultation and Projects

The Consultation and Projects Division supports and enables excellence in the

provision of technical services fostering a sustainable R&D culture. Working closely

with external partners, the projects teams provide multi-disciplinary consultations

based on the specific market needs and requirements. The division aims to:

Develop the highest quality knowledge-based technical services recognized nationally & internationally.Foster & promote a sustainable research culture.Perform applied consultation research to aid the process of national industrial development.Assist the private sector in building successful technology enterprises & businesses using the latest technical expertise & know-how.Increase technology-based sustainability practices leading to greater

resource efficiency in Jordan.

Scientific Research Division

The Industrial & Economic Consultation Cluster plays a fundamental role in

responding to research and development requirements in Jordan which leads

to establishing a local applied industrial research base. In this regard, the

Scientific Research Division is instrumental in attracting financial resources for

the implementation of technology-based research & development activities &

projects serving the national industries.

What we do

In line with the RSS vision to power socio-economic development, the Industrial & Economic Consultation Cluster aims to support and institutionalise research and development efforts. The Cluster is dedicated to scientific research, developing industrial-related policies, and offering technical consultation within different industries. By boosting inventions, enriching local Intellectual properties, and encouraging knowledge transfer; the Cluster focuses on meeting and exceeding satisfaction levels across the industry.

INDUSTRIAL & ECONOMIC CONSULTATION CLUSTER SERVICES

Construction & Urban Planning 47

Co

nstru

ction

& U

rban

Pla

nn

ing

Construction & Urban PlanningTestingConstruction &

Urban Planning

Construction & Urban Planning

Services

Construction & Urban Planning48

CUP Services

Construction Consultations

Different Consultations for Public and private sector in the Site investigations

and Building Defects assessment

Updating and developing Jordanian Building Codes

Reviewing the Jordanian Building Codes developing proposals for JNBC

Green Buildings Assessment

Construction Quality Assurance

About CUP Cluster

RSS is the leader in developing inter-related

fields of applied research, architectural and

structural design, testing, consultations,

standard development, seismic analysis,

specialised training and facilitating technology

transfer. RSS aims to empower economic

development through building excellence

in local community development as well as

establishing, monitoring and upgrading various

construction and green building related codes

of practice. In addition, RSS plays a pivotal role

in the utilisation of knowledge and experience

in socially responsible projects.

CONSTRUCTION AND URBAN PLANNING (CUP) CLUSTER SERVICES

ICT for Development 49

ICT fo

r Develo

pm

en

t

ICT for DevelopmentICT for

DevelopmentTesting

ICT for Development

Services

ICT for Development50

ICT FOR DEVELOPMENT CLUSTER SERVICES

ICT for Development Services

Research and DevelopmentConducting applied research locally and internationally through partnership with concerned international institutions in the various fields of ICT

Software DevelopmentAll ICTD divisions are involved in Software development, it entails establishment of integrated management information systems, workflow systems and core business automation systems, including system analysis, design, programming, testing, system integration, user acceptance, user training, and documentation

ICT Solutions ConsultationThe different divisions in ICT for Development are involved in the identification of the computerisation needs of institutions in terms of information systems each depending on its area of specialisation..

Software Quality and TestingICT for Development through its specialised division; “The Assurance Quality Software division” is responsible to Develop Software Quality standards, templates and improve software testing skills to build a tester team among the ICT for Development employees

Advanced Training and Knowledge TransferICT for Development Cluster is working on transferring the Royal Scientific Society’s vast knowledge in ICT to the local community, in order to meet and sustain social and economic development.

About ICT for Development Cluster

The Information & Communication Technology

(ICT) for Development cluster was founded

in 1972, two years after the establishment

of the Royal Scientific Society (RSS), ICT for

Development cluster has been ISO 9001

certified since January 2001.

ICT for Development 51

ICT FOR DEVELOPMENT CLUSTER PRODUCTS

Integrated Hazardous Material Management Solution (IHMMS)

IHMMS Is a computerized electronic and integrated system used as a tool for the management and control of hazardous substances

imported and produced in the Country. The system is an electronic model for the integrated and core management of hazardous

materials (chemicals, radioactive, pesticides… etc.), as well as to provide the necessary information in an integrated manner for the

involved decision-makers on the types, locations and quantities of hazardous materials used within the country.

Air Quality Management Solution (AQMS)

This solution is intended to monitor the Air pollution in different areas of a country. It manages to collect Air readings frequently

from different focal points distributed in the country using special sensors and manage these indicators by converting pollutant

concentrations to a uniform scale based on the potential health effects at the measured concentrations, In order to measure the

pollution level. Such Solution enables decision makers to take direct, quick and accurate decisions regarding the safety of Air in

the affected area, and control it spread. The solution has special tools for documenting the changes in Air quality of specific Air

effecting industries or open areas in the country too, determine how air quality is changing over time, and evaluate its trend and

define the common air quality problem (if exists).

Laboratory Information Management Solution (LIMS)

LIMS is designed to improve process and cost efficiency, enhance information access, quality and availability; it deals with most

types of samples. It also supports the follow-up of a sample from the moment it’s received to laboratory until it’s delivered to the

customer. The system provides mechanism to manage and distribute tasks among employees.

ICT for Development52

Medical Equipment Solution (MES)

MES is a fully computerized system that enables various medical organizations

and centers to manage their medical devices both centrally and remotely in a

decentralized manner to insure the accurate time of procurement and supply

taking into consideration the actual and future needs of multiple localities.

The system ensures the business continuity through the implementation of the

integrated maintenance request system.

E-Vehicle Insurance System (EVIS)

The e-Vehicle Insurance System (EVIS) has been developed by ICTD to enable

the Vehicle insurance to be completed electronically. The System’s management

includes compulsory insurance and supplementary insurance exported

and produced by all insurance companies in the country, The required fees

for a certain Insurance performed by the individual distributed Insurance

companies; is calculated according to the defined rules and regulations of the

country and integrated for control and use in the Central Insurance Company

(Insurance Federation), this action helps the complete, fare, and up-to date

management and prevents the fraud, in addition to providing information

needed for decision-makers and stakeholders in an integrated manner on the

numbers, types and locations of incidents recorded within the state.

Environmental Data Bank Solution (EDBS)

This solution is intended to monitor and evaluate different types of resources

in a country such as: Reservoirs of drinking water, Pumping stations, Domestic

wastewater treatment plants, Industrial wastewater treatment plants, Dams

Water, Sludge, Soil, Fruits & vegetables, Disinfectants, Cosmetics and Air, and

collect frequent readings (Physical parameters, Chemical parameters (Organic &

Non-organic) and Biological parameters) and then evaluate them to ensure there

compliance with the standard country specifications for drinking and treated

domestic and industrial wastewater and any other standard or specification.

The solution has special tools for documenting the changes in water quality

of specific water bodies in the country too, determine how water quality is

changing over time, and evaluate its trend and define the water quality problem

(if exists).

SERVICE CATALOGUE

Headquarters

Royal Scientific Society

P. O. Box 1438, Amman 11941 The Hashemite Kingdom of JordanTel.: +962 6 53 44 701Fax: +962 6 53 44 806rssinfo@rss.jo

RSS Liaison Offices:

Sahab Office

King Abdullah II Industrial City / Jordan Industrial State CorporationTelefax: +962 6 40 23 079bus.dev-sahab@rss.jo

Aqaba Office

Southern Beach / AqabaTel.: +962 3 20 15 220Fax: +962 3 20 30 078bus.dev-aqaba@rss.jo

Irbid Office

Al Yarmouk University - IrbidTel.: +962 2 22 71 111 (Ext.5184)bus.dev-irbid@rss.jo

www.rss.jo