CERTIFICATE Page 1 of 1

No. P08209112Accredited Certificate (ref. NA-PROD 001) Order No. 100859

Date of issue 28 March 2008

signature

Geir Hørthe

Certification Department

Nemko AS Office address Telephone FaxP.O. Box 73, Blindern Gaustadalléen 30 +47 22 96 03 30 +47 22 96 05 50N-0314 Oslo, Norway Oslo Enterprise number: NO 974404532

Applicant Danfoss A/S Industri Service Global ApprovalsNordborgvej 81E14-S4a6430 NordborgDENMARK

Manufacturer DEVI A/SUlvehavevej 61DK-7100 VejleDENMARK

Factory DEVI A/SUlvehavevej 61DK-7100 VejleDENMARK

Trade mark DeviflexTM / Danfoss XXXProduct Heating cable

Model/type DeviflexTM DSIG

Rating 0,03 ohm/m-100 ohm/m at 20°C, 500V, Class C

Principal characteristics Red PVC-sheath, max surface temperature of 65°C, Cu-screen 16x0,3mm, XLPEinsulation

Standard(s) Safety std.: IEC 60800:1992

Validity This certificate documents conformity with the standards shown, and also appliesas license for use of Nemko's name and certification mark. The certificate andlicense is valid as long as the applicable conditions are complied with, andprovided that any changes to the product are notified to Nemko for acceptanceprior to implementation.New standards or amendments to the standards may imply that the productdesign must be updated and/or that re-testing and re-certification is necessary.

Additional information This certificate replaces our previous certificate P04202810, due to addingadditional materials

CERTIFICATE Page 1 of 2

No. P06207128Order No. 75091

Date of issue 30 October 2006

signature

Pål Pedersen

Certification Department

Nemko AS Office address Telephone FaxP.O. Box 73, Blindern Gaustadalléen 30 +47 22 96 03 30 +47 22 96 05 50N-0314 Oslo, Norway Oslo Enterprise number: NO 974404532

Applicant Danfoss A/S Corporate ApprovalsOffice E14-51Nordborgvej 816430 NordborgDENMARK

Manufacturer DEVI A/SBoedkervej 87100 VejleDENMARK

Factory DEVI A/SBoedkervej 87100 VejleDENMARK

Trade mark DEVIProduct Thermostat

Model/type devireg 330

Ratings 16A 250V AC

Principal characteristics Thermostat for DIN-rail mounting, type 1.B action, micro-disconnection,overvoltage category III, pollution degree II, category D, PTI 175, Class II, withpillar terminals, 10T50. IP 20.

Standard(s) Safety std.: EN 60730-2-9:2002; A1; A2; A11; A12EN 60730-1:2000; A1; A12; A13; A14

Validity This certificate documents conformity with the standards shown, and also appliesas license for use of Nemko's name and certification mark. The certificate andlicense is valid as long as the applicable conditions are complied with, andprovided that any changes to the product are notified to Nemko for acceptanceprior to implementation.New standards or amendments to the standards may imply that the productdesign must be updated and/or that re-testing and re-certification is necessary.

Variants This Certificate also covers variants with Position No. from 001 to 005See next page(s)

CERTIFICATE Page 2 of 2

No. P06207128Order No. 75091

Date of issue 30 October 2006

signature

Pål Pedersen

Certification Department

Nemko AS Office address Telephone FaxP.O. Box 73, Blindern Gaustadalléen 30 +47 22 96 03 30 +47 22 96 05 50N-0314 Oslo, Norway Oslo Enterprise number: NO 974404532

Product ThermostatPosition No 001Trademark DanfossModel/type EFET 330Rating and principalcharacteristics

16A 250V AC

Additional information Thermostat for DIN-rail mounting, type 1.B action, micro-disconnection,overvoltage category III, pollution degree II, category D, PTI 175, Class II, withpillar terminals, 10T50,(-10/10°C), IP 20.

Product ThermostatPosition No 002Trademark DanfossModel/type EFET 330Rating and principalcharacteristics

16A 250V AC

Additional information Thermostat for DIN-rail mounting, type 1.B action, micro-disconnection,overvoltage category III, pollution degree II, category D, PTI 175, Class II, withpillar terminals, 10T50, (5/45°C), IP 20.

Product ThermostatPosition No 003Trademark DanfossModel/type EFET 330Rating and principalcharacteristics

16A 250V AC

Additional information Thermostat for DIN-rail mounting, type 1.B action, micro-disconnection,overvoltage category III, pollution degree II, category D, PTI 175, Class II, withpillar terminals, 10T50, (15/30°C), IP 20.

Product ThermostatPosition No 004Trademark DanfossModel/type EFET 330Rating and principalcharacteristics

16A 250V AC

Additional information Thermostat for DIN-rail mounting, type 1.B action, micro-disconnection,overvoltage category III, pollution degree II, category D, PTI 175, Class II, withpillar terminals, 10T50, (30/90°C), IP 20.

Product ThermostatPosition No 005Trademark DanfossModel/type EFET 330Rating and principalcharacteristics

16A 250V AC

Additional information Thermostat for DIN-rail mounting, type 1.B action, micro-disconnection,overvoltage category III, pollution degree II, category D, PTI 175, Class II, withpillar terminals, 10T50, (60/160°C), IP 20.

Certificate Of ConformityElectromagnetic Compatibility (EMC)

Note: The certificate is no longer valid if any of the reference standards cease to exist or are replaced Page 1 of 1

Nemko AS Gaustadallèen 30 P.O.Box 73 Blindern N-0314 Oslo Norway T +47 22 96 03 30 F +47 22 96 05 50 Enterprise number NO974404532

A sample of this product has been subject to assessment by Nemko, and is herebyconfirmed to be in conformity with the applicable European EMC standards referred below.Sufficient evidence of conformity with Article 4 of the EMC Directive (89/336/EEC +91/263/EEC + 92/31/EEC + 93/68/EEC + 93/97/EEC) has been provided. Certificate No.: HF 072701

Applicant Danfoss A/S Industri Service Global ApprovalsNordborgvej 81, Office E14-S4a,DK-6430 Nordborg,Denmark

Manufacturer DEVI A/SUlvehavevej 61,DK-7100 Vejle,Denmark

Product Thermostat

Model DP-10 (DEVI), D850 (Danfoss)

Rating 18-26V DC

Additional information -

Brand Name DEVI and Danfoss

Documentation Nemko test report # 200208255, E07332.00

Standards applied EN 60730-1 (2003)EN 60730-2-9 (2002) + A1 (2003) + A2 (2005)

This certificate is valid until 2007-11-23 + 4 years (provided that all signed certification conditions are complied with, and that possiblechanges to the product are notified to Nemko for acceptance prior to implementation)

Nemko order number 88836

This certificate authorizes the manufacturer to affix the below shown Nemko EMC Mark to each conforming product. And provided it isotherwise confirmed that the product also conforms with any other applicable Directives, the manufacturer (or the European authorizedrepresentative) may prepare an EC/EEA Declaration of Conformity and affix the below shown CE-marking to each conforming product.

Date of issue 2007-11-23 Certificate revision: 1.0

Roger Berget [Section Manager]

CERTIFICATE Page 1 of 2

No. P07208089Accredited Certificate (ref. NA-PROD 001) Order No. 88836

Date of issue 11 December 2007

signature

Geir Hørthe

Certification Department

Nemko AS Office address Telephone FaxP.O. Box 73, Blindern Gaustadalléen 30 +47 22 96 03 30 +47 22 96 05 50N-0314 Oslo, Norway Oslo Enterprise number: NO 974404532

Applicant Danfoss A/S Industri Service Global ApprovalsNordborgvej 81,Office E14-S4a,DK-6430 Nordborg,Denmark

Manufacturer DEVI A/SUlvehavevej 61DK-7100 VejleDenmark

Factory DEVI A/SBødkervej 8DK-7100 VejleDenmark

Trade mark DEVI

Product ThermostatModel/type DP-10

Rating Max 32A, 180-250VAC / 18-26VDC 50/60Hz, Max 3W

Principal characteristics Electronic thermostat, micro disconnection, type 1.B, Class II, Category D, normalsituations, -10T40, PTI 175, pillar terminals, IP20, for DIN rail mounting

Standard(s) Safety std.: EN 60730-1:2000; A1; A12; A13; A14 andEN 60730-2-7:91 + A1:97 + A11;A12;A13EN 60730-2-9:2002; A1; A2; A11; A12including possible listed national conditions/deviations for Norway.

EMC std.: EN 60730-2-9:2002; A1; A2; A11; A12

Validity This certificate documents conformity with the standards shown, and also appliesas license for use of Nemko's name and certification mark. The certificate andlicense is valid as long as the applicable conditions are complied with, andprovided that any changes to the product are notified to Nemko for acceptanceprior to implementation.New standards or amendments to the standards may imply that the productdesign must be updated and/or that re-testing and re-certification is necessary.

Additional information This certificate replaces previously certificate dated 2007-12-04 due to correctionin standards listed.Additional information on page 2

Variants This Certificate also covers variants with Position No. 001 See next page

CERTIFICATE Page 2 of 2

No. P07208089Accredited Certificate (ref. NA-PROD 001) Order No. 88836

Date of issue 11 December 2007

signature

Geir Hørthe

Certification Department

Nemko AS Office address Telephone FaxP.O. Box 73, Blindern Gaustadalléen 30 +47 22 96 03 30 +47 22 96 05 50N-0314 Oslo, Norway Oslo Enterprise number: NO 974404532

Additional Information: The abovementioned certified equipment complies with current regulatoryrequirements regarding electrical safety and electromagnetic compatibility (EMC)in Norway and other EU/EEA member states.

Product ThermostatTrade mark DanfossPosition No 001Model/type D850Rating and principalcharacteristics

Max 32 A Max 3 W 180-250VAC 18-26 VDC 50/60 Hz

Additional information Electronic thermostat, micro disconnection, type 1.B, Class II, Category D, normalsituations, -10T40, PTI 175, pillar terminals, IP20, for DIN rail mounting

NORDIC CERTIFICATIONSERVICE

Page 1 of 1

Supplement to Certificate:

No. P07208089Order No. 88836

Nemko AS Office address Telephone FaxP.O. Box 73, Blindern Gaustadalleen 30 +47 22 96 03 30 +47 22 96 05 50N-0314 Oslo, Norway Oslo Enterprice number: NO 974404532

NOTIFICATIONWe hereby confirm that the product(s) appearing from the certificate with the above certificate reference alsocomply(ies) with requirements for secondary certification in the following Nordic country(ies):

Denmark, Finland, Sweden

Applicant for Denmark Danfoss A/S Industri Service Global ApprovalsNordborgvej 81,Office E14-S4a,DK-6430 Nordborg,DenmarkAtt. Gilbert Jessen

Applicant for Finland Danfoss A/S Industri Service Global ApprovalsNordborgvej 81,Office E14-S4a,DK-6430 Nordborg,DenmarkAtt. Gilbert Jessen

Applicant for Sweden Danfoss A/S Industri Service Global ApprovalsNordborgvej 81,Office E14-S4a,DK-6430 Nordborg,DenmarkAtt. Gilbert Jessen

Safety standard(s) applied Confer the attached certificate.

EMKO TS document(s) considered Not applicable

EMC/RFI requirements Confer the attached certificate.

The assignment is based on Testing in own premises.

Limitations or reservations regardingthe performed testing/examination

None

Certification marks Affixing of the certification mark(s) of other Nordic body(ies) onthe products must not take place before notice about nationalcertification is received from the individual body.

Production surveillance Will be carried out by Nemko according to agreed procedures.

Other information Copy of the certificate, this Notification and other agreeddocumentation are transferred directly from Nemko to DEMKO,FIMKO, SEMKO

Test sample(s) must be submitted tothe secondary body(ies)

No

This Notification may be challenged if it is more than 3 years old.

Date of issue 04 December 2007

signature

Geir HørtheCertification Department