series ss...8.1.2 torque to retract dead bolt or torque to retract dead bolt and latch bolt by key...
TRANSCRIPT
Series Function Grade Trim Finish1000 F13 1 Lever/turn ss
8 Operational Tests8.1 Dead Bolt Torque
8.1.1 Torque to Retract Dead Bolt or Torque to Retract Dead Bolt and Latch Bolt by Turn (lbf-in)Compliant
Initial 50% Initial 50% Initial 50% Initial 50%CCW 3.2 3.0 1.8 2.5 3.2 2.8 9.0 11.0
8.1.2 Torque to Retract Dead Bolt or Torque to Retract Dead Bolt and Latch Bolt by Key (lbf-in)Compliant
Key Direction Initial 50% Initial 50% Initial 50% Initial 50%CW NA NA NA NA NA NA NA NACCW 4.4 4.4 4.1 4.2 4.6 4.8 9.0 11.0
8.2 Force or Torque to Retract Latch Bolt or Latch Bolt and Dead Bolt8.2.1 Knob or Lever (lbf-in) Compliant
Initial 50% Initial 50% Initial 50% Initial 50%Outside CW NA NA NA NA NA NA NA NAOutside CCW 13.3 12.4 8.9 10.6 9.7 10.6 28.0 34.0Inside CW 11.5 13.3 10.6 11.5 12.4 14.2 28.0 34.0Inside CCW NA NA NA NA NA NA NA NA
8.2.2 Entry Handleset Thumb Piece Force (lbf) Not Applicable
Initial 50% Initial 50% Initial 50% Initial 50%Outside NA NA NA NA NA NA NA NA
Inside NA NA NA NA NA NA NA NA
8.2.3 Paddle Force (lbf) Not Applicable
Initial 50% Initial 50% Initial 50% Initial 50%Outside NA NA NA NA NA NA NA NA
Inside NA NA NA NA NA NA NA NA
8.3 Force to Latch Door - Force (lbf (N)) Compliant
Initial 50% Initial 50% Initial 50% Initial 50%2.5 3.0 2.4 3.0 2.5 2.9 4.5 5.4
8.4 Torque to Retract Latch Bolt by Key (lbf-in) CompliantKey Direction Initial 50% Initial 50% Initial 50% Initial 50%CW NA NA NA NA NA NA NA NACCW 3.5 4.1 2.7 2.8 3.5 3.8 9.0 11.0
8.5 Minimum Projection of Latch Bolt when Depressed to Dead Latched Position (in) Not application
Initial 50% Initial 50% Initial 50% Initial 50%NA NA NA NA NA NA NA NA
8.6 Minimum Projection of Auxiliary Dead Latch to Dead Lock Latch Bolt (in) Not application
Initial 50% Initial 50% Initial 50% Initial 50%NA NA NA NA NA NA NA NA
Model Base Material
Specimen # 003 Maximum Allowable
Maximum Allowable
ASL-10000-02 stainless steel
Specimen # 003
Specimen # 001 Specimen # 002 Specimen # 003
Specimen # 002
Specimen # 001 Specimen # 002
Specimen # 001 Specimen # 002
Specimen # 001 Minimum Allowable
Maximum Allowable
Specimen # 003 Maximum Allowable
Maximum Allowable
Minimum Allowable
Maximum Allowable
Specimen # 002 Specimen # 003
Specimen # 001 Specimen # 002 Specimen # 003 Maximum Allowable
Specimen # 001
Specimen # 001 Specimen # 002 Specimen # 003
Specimen # 002 Specimen # 003
Specimen # 001
Specimen # 001 Specimen # 002 Specimen # 003
Test Results
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8
Page 2 of 12
8.7 Warped Door Test 50 lbf (222 N) Applied to Door, Measure Torque to retract.
8.7.1 Turn or Key Compliant
Initial 50% Initial 50% Initial 50% Initial 50%Key CW NA NA NA NA NA NA NA NA
Key CCW NA NA NA NA NA NA NA NATurn CW NA NA NA NA NA NA NA NA
Turn CCW 5.7 5.1 5.1 5.5 5.5 5.6 33.0 40.0
8.7.2 Lever, Knob or Thumb piece Compliant
Initial 50% Initial 50% Initial 50% Initial 50%Outside CW NA NA NA NA NA NA NA NA
Outside CCW 31.0 31.9 32.7 33.6 29.2 30.1 70.0 84.0Inside CW 30.1 31.0 31.9 32.7 31.0 29.2 70.0 84.0
Inside CCW NA NA NA NA NA NA NA NA
8.7.3 Entry Handleset Thumb Piece Force (lbf) Not Applicable
Initial 50% Initial 50% Initial 50% Initial 50%Outside NA NA NA NA NA NA NA NA
Inside NA NA NA NA NA NA NA NA
8.7.4 Paddle Force (lbf) Not Applicable
Initial 50% Initial 50% Initial 50% Initial 50%Outside NA NA NA NA NA NA NA NA
Inside NA NA NA NA NA NA NA NA
9 Cycle Tests CompliantRotation Technicians Initials
9.6 Do the locks function as originally intended? YesComments:
Date
Credy
Credy2012-12-26
2013-1-2 CredyCredy
Credy
Credy
CredyCredy
2012-12-17
Specimen # 003
Specimen # 003
Specimen # 003
Counter Reading2012-12-11
2013-1-18
2012-12-21
745,869
Specimen # 001
Specimen # 003
Torque (lbf-in) Torque (lbf-in)Specimen # 001
Specimen # 001 Specimen # 002
Maximum AllowableSpecimen # 002
Torque (lbf-in)Maximum Allowable
Torque (lbf-in) Torque (lbf-in) Torque (lbf-in)
Specimen # 002
Torque (lbf-in) Torque (lbf-in)
Specimen # 001 Specimen # 002
Maximum Allowable
Maximum Allowable
153,303
294,594
901,999
2013-1-62013-1-9
2012-12-24
1,000,000
230,086
500,0002012-12-31
648,952
059,542
CredyCredy2012-12-14
72,777
Credy2013-1-15
CredyCredy
Down397,182451,129
2012-12-29
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8
Page 3 of 12
10 Strength Tests10.1 Locked Outside Lever or knob Torque Test (Repeat inside knob only) Compliant
Outside CCWInside CW
Inside CCW
10.2 Axial Load Test10.2.1 Lever or Knob at the Spindle Axis Compliant
OutsideInside
10.2.2 Outside Lever Load 2 inches from Spindle Compliant
Outside
10.2.3 Entry Handlesets Locked Outside Thumbpiece Load Not Applicable
Outside
10.2.4 Locked Outside Paddle Load Not Applicable
Outside at Axle
Outside at 2" from Axle
Inside at Axle
Inside at 2" from Axle
10.3 Vertical Load Test10.3.1 Vertical Load Test Lever or Knob Compliant
OutsideInside
Vertical Load Test Paddles - Test one mounted horizontally and one mounted vertically.Not Applicable
Horizontal OutsideHorizontal InsideVertical Outside
Vertical Inside
10.3.2 Vertical Load Test Entry Handlesets Not Applicable
Outside
10.4 Bolt strength Test Compliant
Latch BoltDead Bolt
NANA NA NA
NANA
NA NA
360
500 500500 500 500 500
Specimen #004 Specimen #005 Specimen #006
NA
500 500
Outside CWTorque (lbf-in)
450Torque (lbf-in)
Test LoadSpecimen #004
Torque (lbf-in) Torque (lbf-in)
Specimen #006Specimen #005
450
NA NANA NA
450 450450
Minimum AllowableForce (lbf) Force (lbf)
360 360
1350 1350 1350 13501200 1200
Specimen #006 Maximum Allowable
NA NA
NA
Force (lbf)NA
NANA
Force (lbf)
Force (lbf)
Test LoadForce (lbf)
NANA
Specimen #006Force (lbf)
NA
Specimen #004 Specimen #005
1200 1200
Specimen #004 Specimen #005
360 360
Specimen #005Specimen #004Force (lbf) Force (lbf)
NA NA
Minimum Allowable
Force (lbf)
Specimen #004
450
Specimen #005 Specimen #006 Minimum Allowable
450 450
Specimen #004 Specimen #005 Specimen #006 Test Load
360
NA NA NA
NA
Force (lbf) Force (lbf) Force (lbf)
Specimen #006
NA NA NA
NA
NA NA
NA NA NA
NA NA NANA
Force (lbf) Force (lbf)
NA
Force (lbf)360 360 360 360
Force (lbf) Force (lbf)
NA NANA NA NA NA
Force (lbf) Force (lbf) Force (lbf) Force (lbf)
Force (lbf) Force (lbf) Force (lbf)Specimen #004 Specimen #005 Specimen #006 Minimum Allowable
Force (lbf)Force (lbf) Force (lbf) Force (lbf)360 360
Minimum Allowable
Force (lbf) Force (lbf) Force (lbf)
Specimen #004 Specimen #005 Specimen #006
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8
Page 4 of 12
10.5 Unlocked Outside Lever or Knob Torque Test Compliant
10.6 Unlocked Entry Handleset Load Test Not applicable
OutsideInside
10.7 Qualification Requirements8.1 Dead Bolt Torque
8.1.1 Torque to Retract Dead Bolt or Torque to Retract Dead Bolt and Latch Bolt by Turn (lbf-in)Compliant
8.1.2 Torque to Retract Dead Bolt or Torque to Retract Dead Bolt and Latch Bolt by Key (lbf-in)Compliant
Key DirectionCWCCW
8.2 Force or Torque to Retract Latch Bolt or Latch Bolt and Dead Bolt8.2.1 Knob or Lever (lbf-in) Compliant
8.2.2 Entry Handleset Thumb Piece Force (lbf) Not Applicable
OutsideInside
8.2.3 Paddle Force (lbf) Not Applicable
OutsideInside
8.3 Force to Latch Door - Force (lbf (N)) Compliant
Torque (lbf-in) Torque (lbf-in)
9.7 13.3 14.2 34.0
Force (lbf)
Torque (lbf-in)NA NA NA NA
Maximum AllowableSpecimen #004 Specimen #005 Specimen #006
NA
Specimen #005
450 450 450450 450 450
Specimen #004 Specimen #006
Force (lbf)
NA
450
Force (lbf)Maximum Allowable
NAForce (lbf)
Specimen #004 Specimen #006Force (lbf) Force (lbf) Force (lbf)
Force (lbf)Specimen #006
NA
Torque (lbf-in) Torque (lbf-in)
NA NANA NA NA NA
Outside CW
35.0NA NA NA NA
NA NA NA NA
NA
Torque (lbf-in) Torque (lbf-in)
13.3
4.2 11.0
Maximum AllowableTorque (lbf-in)
Maximum AllowableForce (lbf)
450 450
450450 450
Torque (lbf-in) Torque (lbf-in)Specimen #006
Outside CCWInside CW
Inside CCW
Maximum Allowable
15.9 12.4
NANA
Specimen #004
NA
Specimen #005
Specimen #005
Torque (lbf-in) Torque (lbf-in)
Torque (lbf-in)
Specimen #004 Specimen #005
Torque (lbf-in)
Torque (lbf-in) Torque (lbf-in)Specimen #004 Specimen #005
1.8
Intside CCW 450 450
Outside CWOutside CCW
450 450Inside CW
Minimum Allowable
NANA NA NA NA
Maximum AllowableForce (lbf) Force (lbf) Force (lbf)
NA NA NA
Specimen #006
11.0
3.5 4.1
2.8 3.2
Specimen #004 Specimen #005 Specimen #006
Specimen #004 Specimen #005 Specimen #006 Maximum Allowable
NA NA
2.7Force (lbf) Force (lbf) Force (lbf) Force (lbf)
5.42.93.0
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8
Page 5 of 12
8.4 Torque to Retract Latch Bolt by Key (lbf-in) CompliantKey DirectionCWCCW
8.5 Minimum Projection of Latch Bolt when Depressed to Dead Latched Position (in) Not applicable
8.7 Warped Door Test 50 lbf (222 N) Applied to Door, Measure Torque to retract.8.7.1 Turn or Key Compliant
Key CWKey CCWTurn CW
Turn CCW
8.7.2 Lever, Knob or Thumb piece Compliant
Outside CWOutside CCW
Inside CWInside CCW
8.7.3 Entry Handleset Thumb Piece Force (lbf) Not Applicable
OutsideInside
8.7.4 Paddle Force (lbf) Not Applicable
OutsideInside
11 Material Evaluation Tests11.1 Knob Crush Test Sample # Not applicable
Grade Base MaterialCompression Load 1000 lbf
CWat Test Compression CCW
Comments: No knobs.
11.2 Rose/Escutcheon Dent Test Sample # 007Grade 1
InsideOutside
Specimen #005 Specimen #006 Maximum Allowable
Compliant
Key Torque
Maximum Depth Allowable (in) Compliant / Non CompliantMeasured Depth (in)
NA NA NA NANA NA NA NA
Force (lbf) Force (lbf) Force (lbf) Force (lbf)
Torque (lbf-in) Torque (lbf-in) Torque (lbf-in) Torque (lbf-in)
Specimen #004
NA NA NA NANA NA NA NA
NA
Force (lbf) Force (lbf) Force (lbf) Force (lbf)Specimen #004 Specimen #005 Specimen #006 Maximum Allowable
NA
Specimen #004 Specimen #005 Maximum Allowable
Maximum Allowable
NA NA
Specimen #004 Specimen #005 Specimen #006
31.9 29.2 30.1 7032.7 31.0 31.9 70
Maximum Allowable
Specimen #006
NA NA NA NA
NA5.7 5.5 5.0 33.0NA NA NANA NA NA
NAProjection (in.)
NANA NA NA NA
NA
Torque (lbf-in) Torque (lbf-in) Torque (lbf-in) Torque (lbf-in)Specimen #004 Specimen #005 Specimen #006
NA NAProjection (in.) Projection (in.) Projection (in.)
Specimen #004 Specimen #005 Specimen #006 Minimum Allowable
2.5 3.9 3.4 11.0
Torque (lbf-in)NA NA NA NA
Torque (lbf-in) Torque (lbf-in) Torque (lbf-in)
Deformation Recorded Deformation (%) Maximum Allowable (%)
0.075
Outside KnobInside Knob
Measured Torque (lbf-in) Maximum Allowable (lbf-in)
0.034 0.075 Compliant0.031
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8
Page 6 of 12
11.3 Outside Rose Deformation Test Sample #008 CompliantGrade 1 Base Material Stainless steel
Outside
Comments:
12 Security Tests12.1 Knob, Lever, Handleset Thumbpiece, or Paddle Impact Test Sample #009 Compliant
Impact 10 X 75ft-lbf Operable Entry Actual 1 X 75ft-lbf Inoperable X Non-Entry X
Comments: When applied 1 blow, the handle was broken, but the door can not be opened by handor screwdriver within 5 minutes.
12.2 Cylinder Guard (Sectional Trim) or Escutcheon ImpactTest Sample # Not application
Impact Operable Entry Inoperable Non-Entry
Comments: The trim project was 0.315" from the surface of the door, not over 3/8 in.
12.3 Cylinder Guard (Sectional Trim) or Escutcheon Tension Test Sample #010 Compliant
Tension 3600 lbf Operable Entry Inoperable X Non-Entry X
Comments:
12.4 Lock Body or Housing Tension Test Sample #011 CompliantTension 3600 lbf Operable Entry
Inoperable X Non-Entry XComments:
12.5 Lock Body or Housing Torque Test Sample #012 CompliantTorque 120 ft-lbf Operable Entry Actual 120 ft-lbf Inoperable X Non-Entry X
Comments:
12.6 Locked Knob, Lever, or Paddle Test Sample #013 Compliant10.5.1 Locked Knob or Lever.
Torque Operable Entry Actual Torque Inoperable X Non-Entry X
650 0.21% 10%
175 ft-lbf
Compression Load (lbf) Deformation Deformation Maximum Allowable
58.3 ft-lbf
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8
Page 7 of 12
Comments:
10.5.2 Locked Paddle Sample # Not applicableForce Operable Entry
Actual Force Inoperable Non-Entry
Comments: No paddle.
12.7 Cylinder Guard (Sectional Trim) or Escutcheon Torque Test Sample #014 CompliantTorque 120 ft-lbf Operable X Entry
Inoperable Non-Entry X
Comments: The attempted torque cannot be achieved due to design features, but the door cannotbe opened by hand or srcewdriver within 5 minutes.
12.8 Cylinder Face Impact Test Sample #015 CompliantImpact 10 X 75 ft-lbf Operable Entry
Inoperable X Non-Entry X
Comments:
12.9 Dead Bolt or Latch Bolt or Dead Bolt and Latch Bolt Impact Test CompliantSample #016
Impact 2 X 60 ft-lbf + Operable X Entry 2 X 90 ft-lbf + Inoperable Non-Entry X2 X 120 ft-lbf +2 X 200 ft-lbf
Comments:
12.10 Dead Bolt Sawing Test - All Grades - 5 Minutes with 5 lbf (22 N) CompliantSample #017
Width of Dead Bolt 1.124"Thickness of Dead Bolt 0.511" Time: more than 5 minutes
Comments: The dead bolt was not sawn off within 5 minutes
12.11 Bolt Compressive Load Test Sample # 018 CompliantAll Grades Deadbolt 360 lbf
Comments: Deabolt project is 0.97" after applied 360lbf, it is more than 0.75".
The lever handle was rotated fully when the torque reached 58.3 ft-lbf, but the door cannot be opened by hand or screwdriver within 5 minutes
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8
Page 8 of 12
Product photos
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8
Page 9 of 12
Product Drawing (1)
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8Page 10 of 12
Product Drawing (2)
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8Page 11 of 12
Revision Page
Credy Chen1
Date
2013-3-8
2013-3-1
Version
0
Changes
First Issue
Change modelno.from 'ASL-10000-02' to 'ASM-10000-
02'
Author
Credy Chen
Reviewer
Blusea Dong
Blusea Dong
Report No:GZ12120235-1R1Angel Metal Co., LtdMortise Lock ASM-10000-02
ANSI/BHMA 156.13 - 2012Date: 2013-3-8Page 12 of 12