series s spares - matrixps.com · rotor, trilobe, nbr covered s2-0013 5722.013 7 bar 70°c...

SSP Pumps

Spare Parts List

Sept 2009 (Issue 4.12)

Birch Road, EastbourneEast Sussex BN23 6PQ, EnglandTel: +44(0)1323 414600

Series SStainless Steel Positive Displacement Rotary Lobe Pumps

Alfa Laval Ltd

www.ssppumps.com

Tel: 44(0)1323 414600Fax: +44(0)1323 412515

Table of contents

Page PageNo. Contents No. Contents

3 S1 Pump 43 R90 Single Mech Seal Exploded View4 S1 Pump (continued) 44 R90 Single Flush Mech Seal Exploded View5 S2 Pump 45 R90 Double Mech Seals (complete) - S16 S2 Pump (continued) 46 R90 Double Mech Seals (complete) - S27 S3 Pump 47 R90 Double Mech Seals (complete) - S38 S3 Pump (continued) 48 R90 Double Mech Seals (complete) - S49 S3 Pump (continued) 49 R90 Double Mech Seals (complete) - S510 S1-S3 Pump Exploded View Drawing 50 R90 Double Mech Seals (complete) - S611 S4 Pump 51 R90 Double Mech Seals (part numbering)12 S4 Pump (continued) 52 R90 Double Mech Seals (parts) - S1-S213 S4 Pump Exploded View Drawing 53 R90 Double Mech Seals (parts) - S3-S414 S5 Horizontally Ported Pump 54 R90 Double Mech Seals (parts) - S5-S615 S5 Horizontally Ported Pump (continued) 55 R90 Double Mech Seal Exploded View16 S5 Horiz Ported Pump Exploded View 56 Hyclean Mech Seals (complete) - S1-S217 S5 Vertically Ported Pump 57 Hyclean Mech Seals (complete) - S3-S418 S5 Vertically Ported Pump (continued) 58 Hyclean Mech Seals (complete) - S5-S619 S5 Vert Ported Pump Exploded View 59 Hyclean Mech Seals (parts)20 S6 Horizontally Ported Pump 60 Hyclean Mech Seal Exploded View21 S6 Horizontally Ported Pump (continued) 61 Hyclean Flush Mech Seal Exploded View22 S6 Horiz Ported Pump Exploded View 62 Packed Gland Seals - S1-S423 S6 Vertically Ported Pump 63 Packed Gland Seals - S5-S624 S6 Vertically Ported Pump (continued) 64 Packed Gland Exploded View25 S6 Vert Ported Pump Exploded View 65 Pressure Relief Valve (complete)26 Rotorcases - R90 and Packed Gland (S1-S2) 66 Pressure Relief Valve (parts) - S1-S527 Rotorcases - R90 and Packed Gland (S3-S4) 67 Pressure Relief Valve (parts) - S628 Rotorcases - R90 and Packed Gland (S5-S6) 68 Pressure Relief Valve Exploded View29 Rotorcases - Hyclean (S1-S4) 69 Jackets and Saddles30 Rotorcases - Hyclean (S5-S6) 70 Jackets and Saddles Exploded Views31 Rotorcases - Body Part Numbers 71 EPDM USP Class VI 'O' Rings & Seals32 Rotorcases - Port Part Numbers 72 Electropolishing (Rotorcase Covers & Rotors)33 Rotorcases - Port Part Numbers (continued) 73 Electropolishing (Rotors cont'd & Rotor Nuts)34 Rectangular to Round Adaptors 74 Electropolishing (Rotorcases)35 Cover/Spline Sealing Kits 75 ATEX Parts36 Service Kits (R90 Single Mechanical Seals) 76 Misc37 Service Kits (Hyclean Single Mechanical Seals) 77 Revision History38 R90 Single Mech Seals (complete) - S1-S2 78 Revision History (continued)39 R90 Single Mech Seals (complete) - S3-S4 79 Revision History (continued)40 R90 Single Mech Seals (complete) - S4-S641 R90 Single Mech Seals (parts) - S1-S442 R90 Single Mech Seals (parts) - S5-S6

NotesThis publication is strictly confidential and remains the property of Alfa Laval Ltd.without whose written permission it must not be copied, reproduced or shown tothird parties, and maybe subject to change without prior notice.

When identifying the spare parts required it is important to check the pumpspecification by referring to the pump serial number.

S1 PumpDrg Description Qty Part No.No.1 Gearcase - universal mounting Burgundy 1 5220.351.022 Dowel 2 5170.0253 Stud, rotorcase retention 4 6350.1354 Nut, rotorcase retention 4 5330.003

4A Washer, rotorcase retention 4 6400.0365 Cover, gearcase 1 5120.1816 Screw, gearcase cover 6 5990.044

(not for ATEX) NBR 5310.047FPM 5310.078

(not for ATEX) Polymex 6150.150St.Stl 6150.151

8A Shim retainer 2 6150.2618B Screw, shim retainer 4 6000.0109 Rotorcase 1 see page 26-3310 Stud, rotorcase/cover retention 4 6350.093

NBR 1550.239FPM 1551.239EPDM 1555.239PTFE 1552.239NBR 5380.087FPM 5380.163EPDM 5380.277PTFE 5380.164

Plain 5130.311Drilled for jacket 5130.331Relief valve see page 63

13 Dome nut, rotorcase cover 4 5340.02914 Retainer, seal 2 5560.03015 Screw, seal retainer 6 5990.044


8 bar 70°C 5712.005GRotor, Trilobe Stainless Steel 8 bar 130°C 5712.005H

8 bar 200°C 5712.005J8 bar 70°C 5730.005G

Rotor, Bilobe Stainless Steel 8 bar 130°C 5730.005H8 bar 200°C 5730.005J8 bar 70°C 5761.005G

Rotor, Bilobe non-galling 8 bar 130°C 5761.005H8 bar 200°C 5761.005J

Rotor, Trilobe, NBR covered S1-0005 5722.0055 bar 70°C 5712.008D

Rotor, Trilobe Stainless Steel 5 bar 130°C 5712.008E5 bar 200°C 5712.008F5 bar 70°C 5730.008D

Rotor, Bilobe Stainless Steel 5 bar 130°C 5730.008E5 bar 200°C 5730.008F5 bar 70°C 5761.008D

Rotor, Bilobe non-galling 5 bar 130°C 5761.008E5 bar 200°C 5761.008F

Rotor, Trilobe, NBR covered S1-0008 5722.008

1

12 1Cover, rotorcase

17 2

11

1

1 set

2

8

16

Lip seal, drive end

Shim

'O' Ring, cover - plain

Lip seal, gland end

'O' Ring, cover - relief valve

7

S1-0008-H05 S1-0008-V05

S1-0008-H05 S1-0008-V05

S1-0005-H08 S1-0005-V08

S1-0005-H08 S1-0005-V08

S1-0005-H08 S1-0005-V08

S1-0008-H05 S1-0008-V05

3 SSP/S/SPARES/0909

S1 Pump (continued)Drg Description Qty Part No.No.

NBR 5380.421FPM 5380.420EPDM 5380.446PTFE 5380.447NBR 5380.421FPM 5380.420EPDM 5380.446NBR 5380.442FPM 5380.443EPDM 5380.444PTFE 5380.445S1-0005 5900.161S1-0008 5900.162

23 Key 1 5270.030R90 6110.592Hyclean 6110.717R90 6100.592Hyclean 6100.717

26 Bearing, rear 2 5080.01127 Spacer, shaft abutment 1 5670.061.0130 Nut, bearing 2 5340.04031 Bearing, front 2 5080.01132 Spacer, bearing 2 5670.10036 Timing gear 2 5210.03638 Torque locking element 2 5615.01339 Clamp plate 2 5110.03940 Screw, clamp plate 6 5990.04445 Drain plug 2 1660.00446 Sight glass - standard (for ATEX pump see 'ATEX Parts') 1 5480.00147 Filler plug - standard (for ATEX pump see'ATEX Parts') 1 31491.0052.148 Plug 2 1660.00849 Blanking plug 4 5470.02250 Gland guard - standard (for ATEX pump see 'ATEX Parts') 2 5243.11151 Screw, gland guard 4 6000.01053 Washer, gland guard 4 31499.5903.354 Foot, vertical port Burgundy 1 5225.401.0256 Foot, horizontal port Burgundy 1 5225.301.0258 Bolt, Foot 2 6000.016

2

2

218

'O' Ring, rotor sealing shaft end (St.Stl rotor)

'O' Ring, rotor sealing shaft end (NBR covered rotor)

Shaft, auxiliary (Duplex)

'O' Ring, rotor sealing nut end20

1

125

22

24

Nut, rotor retention

Shaft, drive (Duplex)

4 SSP/S/SPARES/0909










10 bar 70°C 5740.013M10 bar 130°C 5740.013N10 bar 200°C 5740.013P15 bar 70°C 5740.013T15 bar 130°C 5740.013V15 bar 200°C 5740.013W10 bar 70°C 5741.013M10 bar 130°C 5741.013N10 bar 200°C 5741.013P15 bar 70°C 5741.013T15 bar 130°C 5741.013V15 bar 200°C 5741.013W10 bar 70°C 5761.013M10 bar 130°C 5761.013N10 bar 200°C 5761.013P15 bar 70°C 5761.013T15 bar 130°C 5761.013V15 bar 200°C 5761.013W

Rotor, Trilobe, NBR covered S2-0013 5722.0137 bar 70°C 5740.018M7 bar 130°C 5740.018N7 bar 200°C 5740.018P10 bar 70°C 5740.018T10 bar 130°C 5740.018V10 bar 200°C 5740.018W

S2-0013-H15 S2-0013-V15

Rotor, Trilobe Stainless Steel

S2-0018-H07 S2-0018-V07

S2-0018-H10 S2-0018-V10

217


S2-0013-H10 S2-0013-V10

S2-0013-H15 S2-0013-V15

Rotor, Bilobe Stainless Steel

S2-0013-H10 S2-0013-V10

S2-0013-H15 S2-0013-V15

Rotor, Bilobe non-galling

S2-0013-H10 S2-0013-V10

2

1

7

Shim 8

16


Lip seal, gland end


1

12 Cover, rotorcase

Lip seal, drive end

11

1

1 set

5 SSP/S/SPARES/0909


7 bar 70°C 5741.018M7 bar 130°C 5741.018N7 bar 200°C 5741.018P10 bar 70°C 5741.018T10 bar 130°C 5741.018V10 bar 200°C 5741.018W7 bar 70°C 5761.018M7 bar 130°C 5761.018N7 bar 200°C 5761.018P10 bar 70°C 5761.018T10 bar 130°C 5761.018V10 bar 200°C 5761.018W

Rotor, Trilobe, NBR covered S2-0018 5722.018NBR 1550.022FPM 1551.022EPDM 1555.022PTFE 1558.022NBR 1550.020FPM 1551.020EPDM 1555.020PTFE 1558.020S2-0013 5900.163S2-0018 5900.164

23 Key 1 5270.007R90 6110.545Hyclean 6110.656R90 6110.675Hyclean 6110.660R90 6100.545Hyclean 6100.656R90 6100.675Hyclean 6100.660

26 Bearing, rear 2 5080.01227 Spacer, shaft abutment 1 5670.062.0130 Nut, bearing 2 5340.04131 Bearing, front 2 5080.01232 Spacer, bearing 2 5670.05636 Timing gear 2 5210.03738 Torque locking element 2 5615.01539 Clamp plate 2 5110.04040 Screw, clamp plate 6 5990.00745 Drain plug 2 1660.00446 Sight glass - standard (for ATEX pump see 'ATEX Parts') 1 5480.00147 Filler plug - standard (for ATEX pump see'ATEX Parts') 1 31491.0052.148 Plug 2 1660.00849 Blanking plug 4 5470.02050 Gland guard - standard (for ATEX pump see 'ATEX Parts') 2 5243.11251 Screw, gland guard 4 6000.01053 Washer, gland guard 4 31499.5903.354 Foot, vertical port Burgundy 1 5225.402.0256 Foot, horizontal port Burgundy 1 5225.302.0258 Bolt, Foot 2 6000.015

217



S2-0018-H07 S2-0018-V07

S2-0018-H10 S2-0018-V10

S2-0018-H07 S2-0018-V07

S2-0018-H10 S2-0018-V10


20

22

18

'O' Ring, rotor sealing nut end

2

2

2

1

25


1Shaft, auxiliary (Duplex)

Shaft, drive (Duplex)24

Shaft, drive (St.Stl)

Shaft, auxiliary (St.Stl)

6 SSP/S/SPARES/0909





8A Shim retainer 2 6150.3138B Screw, shim retainer 4 6000.0109 Rotorcase 1 see page 26-33

Std 8 6350.095For rectangular inlet 4 6350.052


Plain 5130.313For rectangular inlet 5130.343Drilled for jacket 5130.333Relief valve see page 63Std 8 5340.047For rectangular inlet 4 5340.022

14 Retainer, seal 2 5560.03215 Screw, seal retainer 6 5990.007



Rotor, Trilobe, NBR covered S3-0027 5722.027




S3-0027-H10 S3-0027-V10

S3-0027-H15 S3-0027-V15

S3-0027-H10 S3-0027-V10

S3-0027-H15 S3-0027-V15

S3-0027-H10 S3-0027-V10

S3-0027-H15 S3-0027-V15

17 2

Cover, rotorcase 1

Lip seal, gland end16 2

12

13 Dome nut, rotorcase cover

1



11

10 Stud, rotorcase/cover retention

1

8 Shim 1 set

7 Lip seal, drive end

7 SSP/S/SPARES/0909



Rotor, Trilobe, NBR covered S3-0038 5722.038NBR 1550.026FPM 1551.026EPDM 1555.026PTFE 1558.026NBR 5380.261FPM 5380.271EPDM 5380.355NBR 1550.024FPM 1551.024EPDM 1555.024PTFE 1558.024S3-0027 5900.165S3-0038 5900.166


26 Bearing, rear 2 5080.01327 Spacer, shaft abutment 1 5670.063.0130 Nut, bearing 2 5340.04231 Bearing, front 2 5080.01332 Spacer, bearing 2 5670.058

St.Stl shaft 5210.032Duplex shaft 5210.038St.Stl shaft 2 5615.016Duplex shaft 4 5615.016

39 Clamp plate 2 5110.04140 Screw, clamp plate 12 5990.005

38 Torque locking element



25


17


1

2

20 'O' Ring, rotor sealing nut end 2

S3-0038-H10 S3-0038-V10

S3-0038-H07 S3-0038-V07

36 Timing gear 2


2

24Shaft, drive (Duplex)

1

Shaft, auxiliary (Duplex)

22

18 2




S3-0038-H07 S3-0038-V07

S3-0038-H10 S3-0038-V10

S3-0038-H07 S3-0038-V07

S3-0038-H10 S3-0038-V10

8 SSP/S/SPARES/0909

S3 Pump (continued)Drg Description Qty Part No.No.45 Drain plug 2 1660.00446 Sight glass - standard (for ATEX pump see 'ATEX Parts') 1 5480.00147 Filler plug - standard (for ATEX pump see 'ATEX Parts') 1 31491.0052.148 Plug 2 1660.00849 Blanking plug 4 5470.02050 Gland guard - standard (for ATEX pump see 'ATEX Parts') 2 5243.11351 Screw, gland guard 4 5990.04552 Washer, gland guard 4 6400.04653 Washer, gland guard 4 31499.5903.354 Foot, vertical port Burgundy 1 5225.413.0056 Foot, horizontal port Burgundy 1 5225.303.0058 Bolt, Foot 2 6000.014

9 SSP/S/SPARES/0909

S1-S3 Pump Model - Exploded View Drawing

10 SSP/S/SPARES/0909










10 bar 70°C 5740.055D10 bar 130°C 5740.055E10 bar 200°C 5740.055F20 bar 70°C 5740.055K20 bar 130°C 5740.055L20 bar 200°C 5740.055M10 bar 70°C 5741.055D10 bar 130°C 5741.055E10 bar 200°C 5741.055F20 bar 70°C 5741.055K20 bar 130°C 5741.055L20 bar 200°C 5741.055M10 bar 70°C 5761.055D10 bar 130°C 5761.055E10 bar 200°C 5761.055F20 bar 70°C 5761.055K20 bar 130°C 5761.055L20 bar 200°C 5761.055M

Rotor, Trilobe, NBR covered S4-0055 5722.0557 bar 70°C 5740.079D7 bar 130°C 5740.079E7 bar 200°C 5740.079F15 bar 70°C 5740.079K15 bar 130°C 5740.079L15 bar 200°C 5740.079M

S4-0055-H10 S4-0055-V10

S4-0055-H20 S4-0055-V20

S4-0079-H10 S4-0079-V10

S4-0079-H15 S4-0079-V15

S4-0055-H10 S4-0055-V10

S4-0055-H20 S4-0055-V20

S4-0055-H10 S4-0055-V10

S4-0055-H20 S4-0055-V20




11

12

17

7 Lip seal, drive end 1

8 Shim 1 set

2

1


16 Lip seal, gland end


Cover, rotorcase 1

2




7 bar 70°C 5741.079D7 bar 130°C 5741.079E7 bar 200°C 5741.079F15 bar 70°C 5741.079K15 bar 130°C 5741.079L15 bar 200°C 5741.079M7 bar 70°C 5761.079D7 bar 130°C 5761.079E7 bar 200°C 5761.079F15 bar 70°C 5761.079K15 bar 130°C 5761.079L15 bar 200°C 5761.079M



26 Bearing, rear 4 5080.01427 Spacer, shaft abutment 1 5670.065.0128 Spacer, bearing drive end 2 5670.05029 Spacer, bearing gland end 2 5670.04930 Nut, bearing rear 2 5340.04331 Bearing, front 4 5080.01534 Nut, bearing front 2 5340.03536 Timing gear 2 5210.03937 Torque locking assembly 2 5615.00045 Drain plug 2 1660.00446 Sight glass - standard (for ATEX pump see 'ATEX Parts') 1 5480.00147 Filler plug - standard (for ATEX pump see 'ATEX Parts') 1 31491.0052.148 Plug 2 1660.00849 Blanking plug 4 5470.02150 Gland guard - standard (for ATEX pump see 'ATEX Parts') 2 5243.11451 Screw, gland guard 4 5990.04552 Washer, gland guard 4 6400.04653 Washer, gland guard 4 31499.5903.354 Foot, vertical port Burgundy 1 5225.404.0256 Foot, horizontal port Burgundy 1 5225.304.0258 Bolt, Foot 2 6000.013



S4-0079-H07 S4-0079-V07

S4-0079-H15 S4-0079-V15

S4-0079-H07 S4-0079-V07

S4-0079-H15 S4-0079-V15


1


22 Nut, rotor retention 2


1

17


18 2



2



S4 Pump Model - Exploded View Drawing


S5 Horizontally Ported PumpDrg Description Qty Part No.No.1 Gearcase Burgundy 1 5220.079.432 Dowel 2 5170.0103 Stud, rotorcase retention 4 6350.1384 Nut, rotorcase retention 4 5330.001












S5-0168-H07

S5-0168-H15

S5-0116-H20


12 Cover, rotorcase


S5-0116-H10

S5-0116-H20

1

17 2

16 Lip seal, gland end 2


S5-0116-H10

S5-0116-H20

S5-0116-H10


7 Lip seal, drive end 1

8 Shim 1 set

11 1



S5 Horizontally Ported Pump (continued)Drg Description Qty Part No.No.




26 Bearing, rear 4 5080.01527 Spacer, shaft abutment 1 5670.067.0128 Spacer, bearing drive end 2 5670.04929 Spacer, bearing gland end 2 5670.05130 Nut, bearing rear 2 5340.03531 Bearing, front 4 5080.01734 Nut, bearing front 2 5340.045


36 Timing gear 2 5210.03437 Torque locking assembly 2 5615.00545 Drain plug 2 1660.00846 Sight glass - standard (for ATEX pump see 'ATEX Parts') 2 5480.00147 Filler plug - standard (for ATEX pump see 'ATEX Parts') 2 31491.0052.150 Gland guard - standard (for ATEX pump see 'ATEX Parts') 2 5243.11551 Screw, gland guard 2 5990.06652 Washer, gland guard 2 6400.03653 Washer, gland guard 2 31499.5903.3

Shaft, drive (Duplex)1


35 Lip seal, upper chamber 1


1

S5-0168-H07

S5-0168-H15




24



18 2



17 2

S5-0168-H07

S5-0168-H15


S5 Horizontally Ported Pump Model - Exploded View Drawing


S5 Vertically Ported PumpDrg Description Qty Part No.No.1 Gearcase Burgundy 1 5220.355.022 Dowel 2 5170.0103 Stud, rotorcase retention 4 6350.1384 Nut, rotorcase retention 4 5330.001












S5-0116-V10

S5-0116-V20


S5-0168-V07

S5-0168-V15


S5-0116-V10

S5-0116-V20


S5-0116-V10

S5-0116-V20

12

7

8

Lip seal, drive end 1

Shim 1 set

1

17 2


16 Lip seal, gland end


Cover, rotorcase 1

2

11


S5 Vertically Ported Pump (continued)Drg Description Qty Part No.No.




26 Bearing, rear 4 5080.01527 Spacer, shaft abutment 1 5670.067.0128 Spacer, bearing drive end 2 5670.04929 Spacer, bearing gland end 2 5670.05130 Nut, bearing rear 2 5340.03531 Bearing, front 4 5080.01734 Nut, bearing front 2 5340.04536 Timing gear 2 5210.03437 Torque locking assembly 2 5615.00545 Drain plug 1 1660.00846 Sight glass - standard (for ATEX pump see 'ATEX Parts') 1 5480.00147 Filler plug - standard (for ATEX pump see 'ATEX Parts') 1 31491.0052.148 Plug 1 1660.00850 Gland guard, upper - standard (for ATEX pump see 'ATEX Parts') 1 5243.115

50A Gland guard, lower - standard (for ATEX pump see 'ATEX Parts') 1 5243.11751 Screw, gland guard 3 5990.06652 Washer, gland guard 3 6400.03653 Washer, gland guard 3 31499.5903.3



2



S5-0168-V07

S5-0168-V15


S5-0168-V07

S5-0168-V15

17 2


1


1


18




S5 Vertically Ported Pump Model - Exploded View Drawing


S6 Horizontally Ported PumpDrg Description Qty Part No.No.1 Gearcase Burgundy 1 5220.081.432 Dowel 2 5170.0113 Stud, rotorcase retention 4 6350.1394 Nut, rotorcase retention 4 5330.002






Plain 5130.316For rectangular inlet 5130.346Drilled for jacket 5130.336Relief valve see page 63



10 bar 70°C 5740.260D10 bar 130°C 5740.260E10 bar 200°C 5740.260F20 bar 70°C 5740.260K20 bar 130°C 5740.260L20 bar 200°C 5740.260M10 bar 70°C 5741.260D10 bar 130°C 5741.260E10 bar 200°C 5741.260F20 bar 70°C 5741.260K20 bar 130°C 5741.260L20 bar 200°C 5741.260M10 bar 70°C 5761.260D10 bar 130°C 5761.260E10 bar 200°C 5761.260F20 bar 70°C 5761.260K20 bar 130°C 5761.260L20 bar 200°C 5761.260M7 bar 70°C 5740.353D7 bar 130°C 5740.353E7 bar 200°C 5740.353F15 bar 70°C 5740.353K15 bar 130°C 5740.353L15 bar 200°C 5740.353M

S6-0260-H10

S6-0260-H20

Cover, rotorcase 1


S6-0353-H07

S6-0353-H15


S6-0260-H10

S6-0260-H20

17 2

16 Lip seal, gland end 2

12



S6-0260-H10

S6-0260-H20

1

1 set


7

8

Lip seal, drive end

Shim

11 1



S6 Horizontally Ported Pump (continued)Drg Description Qty Part No.No.


Rotor, Trilobe, NBR covered S6-0353 5722.353NBR 1550.143FPM 1551.143EPDM 1555.143PTFE 1558.143NBR 5380.025FPM 5380.026EPDM 5380.079

19 Torque locking assembly 2 5615.014NBR 1550.143FPM 1551.143EPDM 1555.143PTFE 1558.143S6-0260 5900.171S6-0353 5900.172


26 Bearing, rear 4 5080.01727 Spacer, shaft abutment 1 5670.068.0128 Spacer, bearing drive end 2 5670.05129 Spacer, bearing gland end 2 5670.05330 Nut, bearing rear 2 5340.04531 Bearing, front 4 5080.01934 Nut, bearing front 2 5340.046


36 Timing gear 2 5210.03537 Torque locking assembly 2 5615.00545 Drain plug 2 1660.00846 Sight glass - standard (for ATEX pump see 'ATEX Parts') 2 5480.00147 Filler plug - standard (for ATEX pump see 'ATEX Parts') 2 31491.0052.150 Gland guard - standard (for ATEX pump see 'ATEX Parts') 2 5243.11651 Screw, gland guard 2 5990.06652 Washer, gland guard 2 6400.03653 Washer, gland guard 2 31499.5903.3

24




S6-0353-H07

S6-0353-H15

S6-0353-H07

S6-0353-H15

Shaft, drive (Duplex)

2


17 2

35 Lip seal, upper chamber 1


1

18


2


1


22 Nut, rotor retention


S6 Horizontally Ported Pump Model - Exploded View Drawing


S6 Vertically Ported PumpDrg Description Qty Part No.No.1 Gearcase Burgundy 1 5220.329.432 Dowel 2 5170.0113 Stud, rotorcase retention 4 6350.1394 Nut, rotorcase retention 4 5330.002






Plain 5130.316For rectangular inlet 5130.346Drilled for jacket 5130.336Relief valve see page 63



10 bar 70°C 5740.260D10 bar 130°C 5740.260E10 bar 200°C 5740.260F20 bar 70°C 5740.260K20 bar 130°C 5740.260L20 bar 200°C 5740.260M10 bar 70°C 5741.260D10 bar 130°C 5741.260E10 bar 200°C 5741.260F20 bar 70°C 5741.260K20 bar 130°C 5741.260L20 bar 200°C 5741.260M10 bar 70°C 5761.260D10 bar 130°C 5761.260E10 bar 200°C 5761.260F20 bar 70°C 5761.260K20 bar 130°C 5761.260L20 bar 200°C 5761.260M7 bar 70°C 5740.353D7 bar 130°C 5740.353E7 bar 200°C 5740.353F15 bar 70°C 5740.353K15 bar 130°C 5740.353L15 bar 200°C 5740.353M

S6-0260-V10

S6-0260-V20


S6-0353-V07

S6-0353-V15


S6-0260-V10

S6-0260-V20

1

17 2

2

12

16


Lip seal, gland end

Cover, rotorcase


S6-0260-V10

1



S6-0260-V20

11

1

8 Shim 1 set

7 Lip seal, drive end


S6 Vertically Ported Pump (continued)Drg Description Qty Part No.No.


Rotor, Trilobe, NBR covered S6-0353 5722.353NBR 1550.143FPM 1551.143EPDM 1555.143PTFE 1558.143NBR 5380.025FPM 5380.026EPDM 5380.079

19 Torque locking assembly 2 5615.014NBR 1550.143FPM 1551.143EPDM 1555.143PTFE 1558.143S6-0260 5900.171S6-0353 5900.172


26 Bearing, rear 4 5080.01727 Spacer, shaft abutment 1 5670.068.0128 Spacer, bearing drive end 2 5670.05129 Spacer, bearing gland end 2 5670.05330 Nut, bearing rear 2 5340.04531 Bearing, front 4 5080.01934 Nut, bearing front 2 5340.04636 Timing gear 2 5210.03537 Torque locking assembly 2 5615.00545 Drain plug 1 1660.00846 Sight glass - standard (for ATEX pump see 'ATEX Parts') 1 5480.00147 Filler plug - standard (for ATEX pump see 'ATEX Parts') 1 31491.0052.148 Plug 1 1660.00850 Gland guard, upper - standard (for ATEX pump see 'ATEX Parts') 1 5243.116

50A Gland guard, lower - standard (for ATEX pump see 'ATEX Parts') 1 5243.11851 Screw, gland guard 3 5990.06652 Washer, gland guard 3 6400.03653 Washer, gland guard 3 31499.5903.3

S6-0353-V15


S6-0353-V07

S6-0353-V15

2



1

1





17



18 2


S6-0353-V07


S6 Vertically Ported Pump Model - Exploded View Drawing


Rotorcases - R90 and Packed Gland - S1 and S2 Pump ModelsS1-0005 S1-0008

in mm Part No. in mm Part No.1 25 9037.026S 1 25 9402.026S

1½ 40 9038.027S1 25 9037.058S 1 25 9402.058S

1½ 40 9038.059S1 25 9037.090S 1 25 9402.090S

1½ 40 9038.091S1 25 9037.042S 1 25 9402.042S

1½ 40 9038.043S1 25 9037.050S 1 25 9402.050S

1½ 40 9038.051S1 25 9037.106S 1 25 9402.106S

1½ 40 9038.107S1 25 9037.034S 1 25 9402.034S

1½ 40 9038.035S1 25 9037.074S 1 25 9402.074S

1½ 40 9038.075S1 25 9037.098S 1 25 9402.098S

1½ 40 9038.099S1 25 9037.082S 1 25 9402.082S

1½ 40 9038.083S1 25 9037.018S 1 25 9402.018S

1½ 40 9038.019S1 25 9037.002S 1 25 9402.002S

1½ 40 9038.003S1 25 9037.010S 1 25 9402.010S

1½ 40 9038.011SS2-0013 S2-0018

in mm Part No. in mm Part No.1 25 9403.026S 1½ 40 9040.252S

1½ 40 9039.027S 2 50 9040.028S1 25 9403.058S 1½ 40 9040.696S

1½ 40 9039.059S 2 50 9040.060S1 25 9403.090S 1½ 40 9040.276S

1½ 40 9039.091S 2 50 9040.092S1 25 9403.042S 1½ 40 9040.318S

1½ 40 9039.043S 2 50 9040.044S1 25 9403.050S 1½ 40 9040.695S

1½ 40 9039.051S 2 50 9040.052S1 25 9403.106S 1½ 40 9040.699S

1½ 40 9039.107S 2 50 9040.108S1 25 9403.034S 1½ 40 9040.342S

1½ 40 9039.035S 2 50 9040.036S1 25 9403.074S 1½ 40 9040.253S

1½ 40 9039.075S 2 50 9040.076S1 25 9403.098S 1½ 40 9040.698S

1½ 40 9039.099S 2 50 9040.100S1 25 9403.082S 1½ 40 9040.274S

1½ 40 9039.083S 2 50 9040.084S1 25 9403.018S 1½ 40 9040.360S

1½ 40 9039.019S 2 50 9040.020S1 25 9403.002S 1½ 40 9040.694S

1½ 40 9039.003S 2 50 9040.004S1 25 9403.010S 1½ 40 9040.416S

1½ 40 9039.011S 2 50 9040.012SNote: See pages 31-33 for other rotorcase part numbers.

BS10E

BS4504/DIN2533

DIN11851

ISS/IDF

NPT

RDG

ASA/ANSI 150RF

SMS FS

NPT

Tri-clamp (BS4825)

RJT

BSP

BSPT

BS4504/DIN2533

Port Standard

SMS

RJT

SMS

SMS FS

Tri-clamp (BS4825)

ASA/ANSI 150RF

BS10E

SizePort Standard

BSP

Size

Size Size

RDG

BSPT

DIN11851

ISS/IDF



in mm Part No. in mm Part No.1½ 40 9041.252S 2 50 9042.231S2 50 9041.028S 2½ 65 9042.030S

1½ 40 9041.696S 2 50 9042.283S2 50 9041.060S 2½ 65 9042.062S

1½ 40 9041.276S 2 50 9042.235S2 50 9041.092S 2½ 65 9042.094S

1½ 40 9041.318S 2 50 9042.233S2 50 9041.044S 2½ 65 9042.046S

1½ 40 9041.695S 2 50 9042.707S2 50 9041.052S 2½ 65 9042.054S

1½ 40 9041.699S 2 50 9042.383S2 50 9041.108S 2½ 65 9042.110S

1½ 40 9041.342S 2 50 9042.232S2 50 9041.036S 2½ 65 9042.038S

1½ 40 9041.253S 2 50 9042.234S2 50 9041.076S 2½ 65 9042.078S

1½ 40 9041.698S 2 50 9042.709S2 50 9041.100S 2½ 65 9042.102S

1½ 40 9041.274S 2 50 9042.271S2 50 9041.084S 2½ 65 9042.086S

1½ 40 9041.360S 2 50 9042.272S2 50 9041.020S 2½ 65 9042.022S

1½ 40 9041.694S 2 50 9042.706S2 50 9041.004S 2½ 65 9042.006S

1½ 40 9041.416S 2 50 9042.327S2 50 9041.012S 2½ 65 9042.014S

S4-0055 S4-0079in mm Part No. in mm Part No.2 50 9043.231S 2½ 65 9408.644S

2½ 65 9043.030S 3 80 9044.135S2 50 9043.283S 2½ 65 9408.647S

2½ 65 9043.062S 3 80 9044.143S2 50 9043.235S 2½ 65 9408.651S

2½ 65 9043.094S 3 80 9044.151S2 50 9043.233S 2½ 65 9408.645S

2½ 65 9043.046S 3 80 9044.139S2 50 9043.707S 2½ 65 9408.646S

2½ 65 9043.054S 3 80 9044.141S2 50 9043.383S 2½ 65 9408.653S

2½ 65 9043.110S 3 80 9044.155S2 50 9043.232S 2½ 65 9408.623S

2½ 65 9043.038S 3 80 9044.137S2 50 9043.234S 2½ 65 9408.649S

2½ 65 9043.078S 3 80 9044.147S2 50 9043.709S 2½ 65 9408.652S

2½ 65 9043.102S 3 80 9044.153S2 50 9043.271S 2½ 65 9408.650S

2½ 65 9043.086S 3 80 9044.149S2 50 9043.272S 2½ 65 9408.685S

2½ 65 9043.022S 3 80 9044.133S2 50 9043.706S 2½ 65 9408.683S

2½ 65 9043.006S 3 80 9044.129S2 50 9043.327S 2½ 65 9408.684S


Tri-clamp (BS4825)

ASA/ANSI 150RF

RJT

SMS

BS4504/DIN2533

BS10E

BS4504/DIN2533

BSPT

DIN11851

ISS/IDF

NPT

SMS FS

Size

Size

BSPT

DIN11851

ISS/IDF

Port Standard

BSP

SMS FS

Tri-clamp (BS4825)

ASA/ANSI 150RF

BSP

RDG

RJT

SMS

Port Standard

Size

Size

BS10E

NPT

RDG



in mm Part No. in mm Part No.2½ 65 9409.644S 3 80 9410.664S3 80 9045.135S 4 100 9046.136S

2½ 65 9409.647S 3 80 9410.667S3 80 9045.143S 4 100 9046.144S

2½ 65 9409.651S 3 80 9410.671S3 80 9045.151S 4 100 9046.152S

2½ 65 9409.645S 3 80 9410.665S3 80 9045.139S 4 100 9046.140S

2½ 65 9409.646S 3 80 9410.666S3 80 9045.141S 4 100 9046.142S

2½ 65 9409.653S 3 80 9410.681S3 80 9045.155S 4 100 9046.156S

2½ 65 9409.623S 3 80 9410.624S3 80 9045.137S 4 100 9046.138S

2½ 65 9409.649S 3 80 9410.669S3 80 9045.147S 4 100 9046.148S

2½ 65 9409.652S 3 80 9410.672S3 80 9045.153S 4 100 9046.154S

2½ 65 9409.650S 3 80 9410.670S3 80 9045.149S 4 100 9046.150S

2½ 65 9409.685S 3 80 9410.737S3 80 9045.133S 4 100 9046.134S

2½ 65 9409.683S 3 80 9410.735S3 80 9045.129S 4 100 9046.130S

2½ 65 9409.684S 3 80 9410.736S3 80 9045.131S 4 100 9046.132S

S6-0260 S6-0353in mm Part No. in mm Part No.4 100 9411.032S 4 100 9412.032S

6 150 9048.280S4 100 9411.064S 4 100 9412.064S

6 150 9048.279S4 100 9411.096S 4 100 9412.096S

6 150 9048.230S4 100 9411.048S 4 100 9412.048S

6 150 -4 100 9411.056S 4 100 9412.056S

6 150 9048.597S4 100 9411.112S 4 100 9412.112S

6 150 -4 100 9411.040S 4 100 9412.040S

6 150 9048.222S4 100 9411.080S 4 100 9412.080S

6 150 -4 100 9411.104S 4 100 9412.104S

6 150 -4 100 9411.088S 4 100 9412.088S

6 150 9048.300S4 100 9411.024S 4 100 9412.024S

6 150 9048.163S4 100 9411.008S 4 100 9412.008S

6 150 9048.161S4 100 9411.016S 4 100 9412.016S

6 150 9048.162SNote: See pages 31-33 for other rotorcase part numbers.

Tri-clamp (BS4825)

ASA/ANSI 150RF

SMS

SMS FS

BS10E

BS4504/DIN2533

BSPT

DIN11851

ISS/IDF

NPT

SMS

SMS FS

ISS/IDF

NPT

RDG

RJT

Tri-clamp (BS4825)

ASA/ANSI 150RF

BS10E

BS4504/DIN2533

RDG

RJT

Size SizePort Standard

BSP

SizePort Standard

BSP

Size

BSPT

DIN11851


Rotorcases - Hyclean Seal - S1 to S4 Pump ModelsS1-0005 S1-0008

in mm Part No. in mm Part No.1 25 9285.090S 1 25 9414.090S

1½ 40 9286.091S1 25 9285.042S 1 25 9414.042S

1½ 40 9286.043S1 25 9285.034S 1 25 9414.034S

1½ 40 9286.035S1 25 9285.074S 1 25 9414.074S

1½ 40 9286.075S1 25 9285.082S 1 25 9414.082S

1½ 40 9286.083SS2-0013 S2-0018

in mm Part No. in mm Part No.1 25 9415.090S 1½ 40 9212.276S

1½ 40 9211.091S 2 50 9212.092S1 25 9415.042S 1½ 40 9212.318S

1½ 40 9211.043S 2 50 9212.044S1 25 9415.034S 1½ 40 9212.342S

1½ 40 9211.035S 2 50 9212.036S1 25 9415.074S 1½ 40 9212.253S

1½ 40 9211.075S 2 50 9212.076S1 25 9415.082S 1½ 40 9212.274S

1½ 40 9211.083S 2 50 9212.084SS3-0027 S3-0038

in mm Part No. in mm Part No.1½ 40 9213.276S 2 50 9214.235S2 50 9213.092S 2½ 65 9214.094S

1½ 40 9213.318S 2 50 9214.233S2 50 9213.044S 2½ 65 9214.046S

1½ 40 9213.342S 2 50 9214.232S2 50 9213.036S 2½ 65 9214.038S

1½ 40 9213.253S 2 50 9214.234S2 50 9213.076S 2½ 65 9214.078S

1½ 40 9213.274S 2 50 9214.271S2 50 9213.084S 2½ 65 9214.086S

S4-0055 S4-0079in mm Part No. in mm Part No.2 50 9215.235S 2½ 65 9420.651S

2½ 65 9215.094S 3 80 9216.151S2 50 9215.233S 2½ 65 9420.645S

2½ 65 9215.046S 3 80 9216.139S2 50 9215.232S 2½ 65 9420.623S

2½ 65 9215.038S 3 80 9216.137S2 50 9215.234S 2½ 65 9420.649S

2½ 65 9215.078S 3 80 9216.147S2 50 9215.271S 2½ 65 9420.650S


Tri-clamp (BS4825)

DIN11851

ISS/IDF

RJT

SMS

Size Size

Size Size

Port Standard

Port Standard

DIN11851

ISS/IDF

RJT

SMS

Tri-clamp (BS4825)

Size Size

RJT

SMS

Port Standard

DIN11851

ISS/IDF

RJT

SMS

Tri-clamp (BS4825)

Tri-clamp (BS4825)

Size SizePort Standard

DIN11851

ISS/IDF


Rotorcases - Hyclean Seal - S5 and S6 Pump ModelsS5-0116 S5-0168

in mm Part No. in mm Part No.2½ 65 9421.651S 3 80 9422.671S3 80 9217.151S 4 100 9218.152S

2½ 65 9421.645S 3 80 9422.665S3 80 9217.139S 4 100 9218.140S

2½ 65 9421.623S 3 80 9422.624S3 80 9217.137S 4 100 9218.138S

2½ 65 9421.649S 3 80 9422.669S3 80 9217.147S 4 100 9218.148S

2½ 65 9421.650S 3 80 9422.670S3 80 9217.149S 4 100 9218.150S

S6-0260 S6-0353in mm Part No. in mm Part No.4 100 9423.096S 4 100 9424.096S

6 150 9220.230S4 100 9423.048S 4 100 9424.048S

6 150 -4 100 9423.040S 4 100 9424.040S

6 150 9220.222S4 100 9423.080S 4 100 9424.080S

6 150 -4 100 9423.088S 4 100 9424.088S

6 150 9220.300SNote: See pages 31-33 for other rotorcase part numbers.

Port Standard

DIN11851

Port Standard

DIN11851

ISS/IDF

RJT

SMS

Tri-clamp (BS4825)

Size Size

Size Size

ISS/IDF

RJT

SMS

Tri-clamp (BS4825)


Rotorcases - Body Part Numbers

Port Bore ConnectionSize Size(mm) (mm)

S1-0005 STD 22.2 25 B 037 061 181 241 285 308 483 471STD 22.2 25 B 402 425 432 455 414 439 446 472ENL 26.0 40 C 038 062 191 242 286 309 454 463STD 22.2 25 B 403 426 433 456 415 440 447 473ENL 26.0 40 C 039 063 182 243 211 231 221 464STD 34.9 40 D 016 052 - - - - - -ENL 34.9 50 E 040 064 192 244 212 232 222 474STD 34.9 40 D 017 053 - - - - - -ENL 34.9 50 E 041 065 183 245 213 233 223 475STD 47.6 50 G 016 054 - - - - - -ENL 47.6 65 H 042 066 193 246 214 234 224 476STD 47.6 50 G 019 055 - - - - - -ENL 47.6 65 H 043 067 184 247 215 235 225 477STD 60.3 65 I 408 427 434 457 420 441 448 478ENL 63.0 80 K 044 068 194 248 216 236 226 465STD 60.3 65 I 409 428 435 458 421 442 449 479ENL 63.0 80 K 045 069 185 249 217 237 227 466STD 73.0 80 M 410 429 436 459 422 443 450 480ENL 78.0 100 O 046 070 195 250 218 238 228 467

S6-0260 STD 97.6 100 P 411 430 437 460 423 444 451 481STD 97.6 100 P 412 431 438 461 424 445 452 482ENL 120.0 150 Q 048 072 196 252 220 462 230 468

Due to the high number of combinations of rotorcase body and port standard the below tables show how to construct the complete rotorcase part number.

Example:Rotorcase machined for R90 mechanical seal with 1" (25mm) BSP male connections forS1-0005 pump.Part number 9037.026S = 9 + 037 + 026 + S where 9 = constant037 = rotorcase body code026 = rotorcase port codeS = constant (Series S)

Example: (vertically ported flanged rotorcase S1-S5 ONLY)Rotorcase machined for R90 mechanical seal with 1" (25mm) ASA150RF connections for S1-0005 pump.Part no. 9037.018/324S = 9 + 037 + 018 + 324 + S where 9 = constant037 = rotorcase body code018 = rotorcase top port code324 = rotorcase bottom port code for bendS = constant (Series S)For bottom flanged bends and gaskets see page 33.

R90 = R90 and Packed Gland SealHYC = Hyclean SealHS = drilled for Heating SaddleRECT = Rectangular InletPort bore and code information is for internal use only

S1-0008

S2-0013

CodeHYC

RECT

R90RECT

HS

HYCRECT

HSRotorcase Body HYC

HSR90 HYCR90HS

R90RECT

S6-0353

S3-0038

S2-0018

S4-0055

S4-0079

S5-0116

S5-0168

S3-0027


Rotorcases - Port Part Numbers

Size(mm) Bore Code

005 25 13.5 A 025 057 049 041 033 113 065 105005/008/013 25 22.2 B 026 058 050 042 034 114 066 106008/013/018/027 40 26.0 C 027 059 051 043 035 115 067 107018/027 40 34.9 D 252 696 695 318 342 700 697 699018/027/055 50 34.9 E 028 060 052 044 036 116 068 108038 50 38.0 F 029 061 053 045 037 117 069 109038/055 50 47.6 G 231 283 707 233 232 710 708 383038/055/079/116 65 47.6 H 030 062 054 046 038 118 070 110079/116 65 60.3 I 644 647 646 645 623 654 648 653079/116 65 63.0 J - - - 376 377 - - -079/116 80 63.0 K 135 143 141 139 137 157 145 155168 80 70.0 L 031 063 055 047 039 119 071 111168 80 73.0 M 664 667 666 665 624 673 668 681168 100 78.0 O 136 144 142 140 138 158 146 156260/353 100 97.6 P 032 064 056 048 040 120 072 112353 150 120.0 Q 280 279 597 - - - - -

Size(mm) Bore Code

005 25 13.5 A 073 097 089 081 121 564 242 286005/008/013 25 22.2 B 074 098 090 082 122 565 243 287008/013/018/027 40 26.0 C 075 099 091 083 123 566 244 288018/027 40 34.9 D 253 698 276 274 701 567 420 289018/027/055 50 34.9 E 076 100 092 084 124 568 245 290038 50 38.0 F 077 101 093 085 125 569 246 291038/055 50 47.6 G 234 709 235 271 711 570 421 292038/055/079/116 65 47.6 H 078 102 094 086 126 508 247 293079/116 65 60.3 I 649 652 651 650 655 662 657 659079/116 65 63.0 J 450 - 428 323 - - 456 384079/116 80 63.0 K 147 153 151 149 159 509 250 294168 80 70.0 L 079 103 095 087 127 571 248 295168 80 73.0 M 669 672 671 670 674 738 676 678168 100 78.0 O 148 154 152 150 160 573 251 296260/353 100 97.6 P 080 104 096 088 128 572 249 297353 150 120.0 Q - - 230 300 - 222 - -

Size(mm) Bore Code

005 25 13.5 A 001 168 017 197 009 179 211 396005/008/013 25 22.2 B 002 169 018 198 010 180 212 397008/013/018/027 40 26.0 C 003 170 019 199 011 181 213 398018/027 40 34.9 D 694 702 360 704 416 703 705 399018/027/055 50 34.9 E 004 171 020 200 012 182 214 400038 50 38.0 F 005 172 021 201 013 183 215 401038/055 50 47.6 G 706 712 272 714 327 713 715 402038/055/079/116 65 47.6 H 006 173 022 202 014 184 216 403079/116 65 60.3 I 683 686 685 688 684 687 689 661079/116 65 63.0 J - - - - - - - -079/116 80 63.0 K 129 176 133 203 131 186 217 406168 80 70.0 L 007 174 023 204 015 185 218 404168 80 73.0 M 735 - 737 - 736 - - 680168 100 78.0 O 130 177 134 205 132 188 219 407260/353 100 97.6 P 008 175 024 206 016 187 220 405353 150 120.0 Q 161 178 163 207 162 189 221 -

BS10E

BS10F

ASA150RF

SMSSodime

ASA300RF

BS4504PN16

JISB2212/

10F

ASA150FF

ILINE SRJT

ThreadBevelSeat

DSSMS SMSFS

DIN11851

TriClampBS4825

3AACMEIDF RDGILCBSP RJTBSPT NPT

Port BoreRotorcase Port

Rotorcase Port

Rotorcase Port

Port Bore

Port Bore


Rotorcases - Port Part Numbers (continued)

Size(mm) Bore Code

005 25 13.5 A 584 467 489 - - -005/008/013 25 22.2 B 585 468 490 - 775 324008/013/018/027 40 26.0 C 586 487 491 - 605 257018/027 40 34.9 D - - - - 776 -018/027/055 50 34.9 E 587 463 492 - 606 258038 50 38.0 F 588 469 493 - - -038/055 50 47.6 G 589 - - - 774 273038/055/079/116 65 47.6 H 563 470 488 503 777 259079/116 65 60.3 I 690 691 692 693 663 -079/116 65 63.0 J - - 498 504 - -079/116 80 63.0 K 593 473 496 499 778 260168 80 70.0 L 590 471 494 505 607 -168 80 73.0 M - - - - 682 -168 100 78.0 O 594 486 497 - 780 261260/353 100 97.6 P 591 472 495 - 781 -353 150 120.0 Q 595 - - - - -

Size(mm) Bore Code

005 25 22.2 B008/013 40 26.0 C018/027 40 34.9 D018/027 50 34.9 E038/055 50 47.6 G038/055 65 47.6 H079/116 80 63.0 K168 100 78.0 O

5198.1885198.170

-5198.171

5000.4555000.413

-

5000.4125000.416

5000.402

5000.4145000.414

5000.4535000.398

-5000.3995000.399 5198.171

5198.172

5000.417 5198.174

5000.4155198.173

5000.4005000.4015000.411

5000.4095000.4095000.410

5000.4545000.408

-

Flanged Bends (for S1-S5 vertically ported pumps)

BS10E

ASA150RF

BS4504PN16

PTFEGasketRotorcase Port

Port Bore

Port BoreRotorcase Port DIN

32676Rotorcase bottom port code for flanged bend

BS4504PN25

DIN11864-

1A

DIN2576

4504FF

DIN2573


Rectangular to Round Adaptors

Size(mm) Bore Code

S1-0005 40 26.0 C 5001.435S1-0008 50 38.0 F 5001.236S2-0013 50 38.0 F 5001.275S2-0018 80 70.0 L 5001.237S3-0027 80 70.0 L 5001.281S3-0038 80 70.0 L 5001.238S4-0055 100 97.6 P 5001.316S4-0079 100 97.6 P 5001.359S5-0116 100 97.6 P 5001.367S5-0168 150 120.0 Q 5001.240S6-0260 150 120.0 QS6-0353 150 120.0 Q 5001.241

S1 6350.019 5330.007S2 - Fixing to cap screw not stud 5990.052 -S3 6350.093 5330.003S4 6350.093 5330.003S5 6350.104 5330.000S6 5990.038 -

S1-0005 1551.033S1-0008 1551.034S2-0013 1551.035S2-0018 1551.143S3-0027 1551.151S3-0038 1551.152S4-0055 5380.403S4-0079 5380.161S5-0116 5380.292S5-0168 1551.249S6-0260 1551.259S6-0353 1551.262

Rotorcase

'O' Ring, FPM(1 per adaptor)

Part No.

Part No.

Fixing Stud(4 per adaptor)

Nut, Fixing Stud(4 per adaptor)Rotorcase

Part No.

The table below shows how to construct the part number for rectangular to round adaptors.

Example:Rectangular to Round Adaptor with 4" (100mm) SMS connection for S4-0079 pump.Part number 5001.359.080 = 5001.359 + 080where 5001.359 = rectangular adaptor code 080 = adaptor port code (see page 32-33)

RotorcasePort Bore Rectangular

Adaptorcode


Cover/Spline Sealing Kits - Series S Pump Models

Each kit comprises of Rotorcase Cover 'O' Ring and Rotor 'O' Rings for one pump.

Kits for Relief Valve Covers also include Valve Piston 'O' Ring.

S1 S2

Part No. Part No.NBR KU1BB KU2BBEPDM KU1CC KU2CCFPM KU1DD KU2DDPTFE KU1EE KU2EE

Plain - rubber rotor NBR - KU2GBNBR KU1BG KU2BGEPDM KU1CH KU2CHFPM KU1DJ KU2DJPTFE KU1EK KU2EK

S3 S4


Plain - rubber rotor NBR KU3GB KU4GBNBR KU3BG KU4BGEPDM KU3CH KU4CHFPM KU3DJ KU4DJPTFE KU3EK KU4EK

S5 S6


Plain - rubber rotor NBR KU5GB KU6GBNBR KU5BG KU6BGEPDM KU5CH KU6CHFPM KU5DJ KU6DJPTFE KU5EK KU6EK

'O' RingsCover Type

Relief Valve

Cover Type 'O' Rings

Plain - st.stl rotor


Relief Valve

'O' RingsCover Type


Relief Valve


Service Kits (R90 Single Mechanical Seals) - Series S Pump Models

Each kit comprises of 1 off Cover/Spline Sealing Kit and 2 off complete Mechanical Seals for one pump.

S1 S2

Part No. Part No.NBR KU1BB-C10 KU2BB-C10EPDM KU1CC-C11 KU2CC-C11FPM KU1DD-C12 KU2DD-C12NBR KU1BB-C20 KU2BB-C20EPDM KU1CC-C21 KU2CC-C21FPM KU1DD-C22 KU2DD-C22NBR KU1BB-C40 KU2BB-C40EPDM KU1CC-C41 KU2CC-C41FPM KU1DD-C42 KU2DD-C42NBR KU1BB-C30 KU2BB-C30EPDM KU1CC-C31 KU2CC-C31FPM KU1DD-C32 KU2DD-C32NBR KU1BB-C50 KU2BB-C50EPDM KU1CC-C51 KU2CC-C51FPM KU1DD-C52 KU2DD-C52

S3 S4


S5 S6


Rotary Seal /Stationary Seal Ring 'O' Rings

'O' Rings

Stainless Steel / Inserted Carbon

Tungsten Carbide / Inserted Carbon

Tungsten Carbide /Tungsten Carbide

Silicon Carbide / Inserted Carbon




Silicon Carbide /Silicon Carbide

Rotary Seal /Stationary Seal Ring










Service Kits (Hyclean Single Mechanical Seals) - Series S Pump Models

Each kit comprises of 1 off Cover/Spline Sealing Kit and 2 off complete Mechanical Seals for one pump.

S1 S2

Part No. Part No.NBR KU1BB-H01 KU2BB-H01EPDM KU1CC-H05 KU2CC-H05FPM KU1DD-H02 KU2DD-H02NBR KU1BB-H11 KU2BB-H11EPDM KU1CC-H15 KU2CC-H15FPM KU1DD-H12 KU2DD-H12NBR KU1BB-H21 KU2BB-H21EPDM KU1CC-H25 KU2CC-H25FPM KU1DD-H22 KU2DD-H22

S3 S4


S5 S6



'O' Rings

'O' Rings

Stainless Steel / Carbon


Silicon Carbide / Carbon










R90 Single Mechanical Seals (Complete) - S1 and S2 Pump Models

2 seals per pump. It is recommended to replace both sets of seals when wear dictates seal replacement

S1 S2

Part No. Part No.NBR 7400.101N 7400.102NEPDM 7400.101E 7400.102EFPM 7400.101V 7400.102VPTFE 7400.101P 7400.102PNBR 7400.141N 7400.142NEPDM 7400.141E 7400.142EFPM 7400.141V 7400.142VPTFE 7400.141P 7400.142PNBR 7400.161N 7400.162NEPDM 7400.161E 7400.162EFPM 7400.161V 7400.162VPTFE 7400.161P 7400.162PNBR 7400.171N 7400.172NEPDM 7400.171E 7400.172EFPM 7400.171V 7400.172VPTFE 7400.171P 7400.172PNBR 7400.191N 7400.192NEPDM 7400.191E 7400.192EFPM 7400.191V 7400.192VPTFE 7400.191P 7400.192PNBR 7400.201N 7400.202NEPDM 7400.201E 7400.202EFPM 7400.201V 7400.202VPTFE 7400.201P 7400.202P

S1 S2

Part No. Part No.Anti-Rotation Pin 6 5180.017 5180.017Spacer (over 10 bar only) 2 - 5670.070

2 - 5380.053

Additional parts to convert pump fitted with above R90 seals to single flushed seals

Drawing S1 S2

Item No. Part No. Part No.- 4010.331A 4010.332A- 4010.331B 4010.332B

Conversion kits comprising of:-Gasket 1 5198.201 -'O' Ring (FPM) 2 - 1551.034Lip Seal (FPM) 76 2 5310.123 5310.124

77 2 5380.319 5380.05377A 2 5670.109 5670.070

Housing, BSPT 5265.224AA 5265.305AHousing, NPT 5265.224BA 5265.305BStud - 4 6350.112 6350.102Washer - 4 6400.046 6400.036Nut, Stud - 4 5330.007 5330.003

1


Conversion kit - BSPT

79 2

Spacer 'O' Ring (FPM)Spacer

75

Conversion kit - NPT

QtyDescription

'O' RingsRotary Seal /Stationary Seal Ring



QtyDescription

Spacer 'O' Ring (FPM)







S3 S4


S3 S4

Part No. Part No.Anti-Rotation Pin 6 5180.017 5180.016Spacer (over 10 bar only) 2 5670.108 5670.074

2 5380.019 5380.275


Drawing S3 S4


Conversion kits comprising of:-'O' Ring (FPM) 75 2 1551.037 1551.532Lip Seal (FPM) 76 2 5310.125 5310.126

77 2 5380.019 5380.27577A 2 5670.108 5670.074

Housing, BSPT 5265.306A 5265.307AHousing, NPT 5265.306B 5265.307BStud 4 6350.102 -Washer 4 6400.036 -Nut, Stud 4 5330.003 -Screw 4 - 5990.078

Description

79 2

1

Qty

Spacer

Description

Conversion kit - BSPTConversion kit - NPT






Qty








S5 S6


S5 S6

Part No. Part No.Anti-Rotation Pin 6 5180.016 5180.015Spacer (over 10 bar only) 2 5670.076 5670.078

2 5380.077 5380.158


Drawing S5 S6


Conversion kits comprising of:-'O' Ring (FPM) 75 2 1551.044 1551.048Lip Seal (FPM) 76 2 5310.127 5310.128

77 2 5380.077 5380.15877A 2 5670.076 5670.078

Housing, BSPT 5265.308A 5265.309AHousing, NPT 5265.308B 5265.309BStud 4 6350.104 6350.105Washer 4 6400.037 6400.037Nut, Stud 4 5330.000 5330.000

79 2

Spacer

QtyDescription

Description



1

'O' Rings

Qty










R90 Single Mechanical Seals (Parts) - S1 to S4 Pump Models

Drg S1 S2

No. Part No Part NoNBR 5380.214 5380.222EPDM 5380.218 5380.226FPM 5380.216 5380.224PTFE 5380.220 5380.228Solid Carbon R5630.066 R5630.067Inserted Carbon R5630.060 R5630.061Tungsten Carbide R5630.072 R5630.073Silicon Carbide R5630.078 R5630.079NBR 5380.213 5380.221EPDM 5380.217 5380.225FPM 5380.215 5380.223PTFE 5380.219 5380.227Stainless Steel R7400.121 R7400.122Tungsten Carbide R7400.131 R7400.132Silicon Carbide R7400.181 R7400.182

78 Grub Screw 6 6010.012 6010.01298 Washer 2 R6400.061 R6400.06299 Wave Spring (see note 1) 2 R6300.031 R6300.032

Drg S3 S4


78 Grub Screw 6 6010.012 6010.01398 Washer 2 R6400.063 R6400.06499 Wave Spring (see note 1) 2 R6300.033 R6300.034

Note 1. If PTFE 'O' Rings are fitted it is necessary to use double wave springs i.e. Qty 4.

72 Stationary Seal Ring 2

Note: Rotary Seal Assembly (74) comprises of rotary seal ring, washer (98), wave spring (99), drive ring (100) and grub screw (78)

73 Rotary Seal Ring 'O' Ring 2

74 Rotary Seal Assembly 2


2

2

71 Stationary Seal Ring 'O' Ring 2

74 Rotary Seal Assembly


Description Material Qty

73 Rotary Seal Ring 'O' Ring




R90 Single Mechanical Seals (Parts) - S5 and S6 Pump Models

Drg S5 S6


78 Grub Screw 6 6010.032 6010.03098 Washer 2 R6400.065 R6400.066

Wave Spring (see note 1) 2 R6300.035 -Coil Spring 12 - R6300.036

Note 1. If PTFE 'O' Rings are fitted it is necessary to use double wave springs i.e. Qty 4.

74



Rotary Seal Assembly 2

99





R90 Single Mechanical Seal - Exploded View Drawing


R90 Single Flushed Mechanical Seal - Exploded View Drawing


R90 Double Mechanical Seals (Complete) - S1 Pump Models

2 seals per pump. It is recommended to replace both sets of seals when wear dictates seal replacement.

Outboard Seal S1

NBR NBR 7400.101N/101NEPDM EPDM 7400.101E/101EFPM FPM 7400.101V/101VPTFE PTFE 7400.101P/101PPTFE NBR 7400.101P/101NPTFE EPDM 7400.101P/101EPTFE FPM 7400.101P/101VNBR NBR 7400.141N/141NEPDM EPDM 7400.141E/141EFPM FPM 7400.141V/141VPTFE PTFE 7400.141P/141PPTFE NBR 7400.141P/141NPTFE EPDM 7400.141P/141EPTFE FPM 7400.141P/141VNBR NBR 7400.171N/101NEPDM EPDM 7400.171E/101EFPM FPM 7400.171V/101VPTFE PTFE 7400.171P/101PPTFE NBR 7400.171P/101NPTFE EPDM 7400.171P/101EPTFE FPM 7400.171P/101VNBR NBR 7400.171N/171NEPDM EPDM 7400.171E/171EFPM FPM 7400.171V/171VPTFE PTFE 7400.171P/171PPTFE NBR 7400.171P/171NPTFE EPDM 7400.171P/171EPTFE FPM 7400.171P/171VNBR NBR 7400.201N/101NEPDM EPDM 7400.201E/101EFPM FPM 7400.201V/101VPTFE PTFE 7400.201P/101PPTFE NBR 7400.201P/101NPTFE EPDM 7400.201P/101EPTFE FPM 7400.201P/101VNBR NBR 7400.201N/201NEPDM EPDM 7400.201E/201EFPM FPM 7400.201V/201VPTFE PTFE 7400.201P/201PPTFE NBR 7400.201P/201NPTFE EPDM 7400.201P/201EPTFE FPM 7400.201P/201V

Note: Above are listed the most common seal ring / 'O' ring combinations - for other combinations see p.49.

S1

Part No.Gasket 75 1 5198.201Housing, BSPT 5265.221AAHousing, NPT 5265.221BAElbow, BSPT 5192.050AElbow, NPT 5192.050BStud - 4 6350.112Nut, Stud - 4 5330.007Note: Elbows only required on horizontally ported pumps with flanged connections.



Tungsten Carbide / Tungsten Carbide

79 2

Description


Silicon Carbide / Silicon Carbide


Part No.

Outboard Seal 'O'

RingRotary Seal /Stationary Seal Ring

Inboard Seal 'O'

Ring

Inboard SealRotary Seal /Stationary Seal Ring

- 4

Qty







Drg No.




Outboard Seal S2



S2

Part No.'O' Ring (FPM) 75 2 1551.034Housing, BSPT 5265.325AHousing, NPT 5265.325BElbow, BSPT 5192.050AElbow, NPT 5192.050BStud - 4 6350.103Nut, Stud - 4 5330.003Note: Elbows only required on horizontally ported pumps with flanged connections.





Inboard Seal 'O'

Ring

Outboard Seal 'O'

RingRotary Seal /Stationary Seal Ring


Part No.









Description

- 4

Qty

79 2

Drg No.




Outboard Seal S3



S3


Part No.

Inboard Seal 'O'

Ring

Outboard Seal 'O'

Ring












- 4



QtyDescription

79 2

Drg No.





Outboard Seal S4



S4









Part No.





Inboard Seal 'O'

Ring

Outboard Seal 'O'

Ring




- 4

QtyDescription

79 2

Drg No.




Outboard Seal S5



S5

Part No.'O' Ring (FPM) 75 2 1551.044Housing, BSPT 5265.328AHousing, NPT 5265.328BStud - 4 6350.107Nut, Stud - 4 5330.000

Outboard Seal 'O'

Ring




Inboard Seal

Part No.

Inboard Seal 'O'

Ring

79 2


Description




QtyDrg No.











Outboard Seal S6

NBR NBR 7400.106N/106NEPDM EPDM 7400.106E/106EFPM FPM 7400.106V/106VPTFE PTFE 7400.106P/106PPTFE NBR 7400.P106P/106NPTFE EPDM 7400.P106P/106EPTFE FPM 7400.P106P/106VNBR NBR 7400.146N/146NEPDM EPDM 7400.146E/146EFPM FPM 7400.146V/146VPTFE PTFE 7400.146P/146PPTFE NBR 7400.P146P/146NPTFE EPDM 7400.P146P/146EPTFE FPM 7400.P146P/146VNBR NBR 7400.P176N/106NEPDM EPDM 7400.P176E/106EFPM FPM 7400.P176V/106VPTFE PTFE 7400.P176P/106PPTFE NBR 7400.P176P/106NPTFE EPDM 7400.P176P/106EPTFE FPM 7400.P176P/106VNBR NBR 7400.176N/176NEPDM EPDM 7400.176E/176EFPM FPM 7400.176V/176VPTFE PTFE 7400.176P/176PPTFE NBR 7400.P176P/176NPTFE EPDM 7400.P176P/176EPTFE FPM 7400.P176P/176VNBR NBR 7400.P206N/106NEPDM EPDM 7400.P206E/106EFPM FPM 7400.P206V/106VPTFE PTFE 7400.P206P/106PPTFE NBR 7400.P206P/106NPTFE EPDM 7400.P206P/106EPTFE FPM 7400.P206P/106VNBR NBR 7400.206N/206NEPDM EPDM 7400.206E/206EFPM FPM 7400.206V/206VPTFE PTFE 7400.206P/206PPTFE NBR 7400.P206P/206NPTFE EPDM 7400.P206P/206EPTFE FPM 7400.P206P/206V

Note: Above are listed the most common seal ring / 'O' ring combinations - for other combinations see p.49.Note: For S6 seals where inboard and outboard seals are different, then there is an additional "P" in thepart number to distinguish between S6 seals and A7-0550 and G7-0550 seals

S6

Part No.'O' Ring (FPM) 75 2 1551.048Housing, BSPT 5265.329AHousing, NPT 5265.329BScrew - 4 5990.004


Inboard Seal 'O'

Ring

Outboard Seal 'O'

Ring



Drg No.

79

Part No.






2

Description


Qty







R90 Double Mechanical Seals (Complete - Part Numbering)The table below shows how to create the complete seal part number.

Example: 7400.174V/144VDouble R90 seal with Tungsten Carbide vs. Tungsten Carbide faces inboard with FPM product wettedO' rings and Inserted Carbon vs. Stainless Steel outboard faces with FPM flush wetted 'O' rings forSeries S4 pump model.

7400. ** * * / ** * *

N = NBR N = NBRE = EPDM E = EPDMV = FPM V = FPMP = PTFE P = PTFE

R90Mechanical

Seal

InboardSeal

Faces

O tb dOutboardSeal

Faces

S1 = 1 S1 = 1S2 = 2 S2 = 2S3 = 3 S3 = 3S4 = 4 S4 = 4S5 = 5 S5 = 5S6 = 6 S6 = 6

10 = Solid Carbon vs. Stainless Steel14 = Inserted Carbon vs. Stainless Steel16 = Inserted Carbon vs. Tungsten Carbide17 = Tungsten Carbide vs. Tungsten Carbide19 = Inserted Carbon vs. Silicon Carbide20 = Silicon Carbide vs. Silicon Carbide


R90 Double Mechanical Seals (Parts) - S1 and S2 Pump Models

Drg S1 S2

No. Part No Part NoNBR 5380.214 5380.222EPDM 5380.218 5380.226FPM 5380.216 5380.224PTFE 5380.220 5380.228Solid Carbon R5630.066 R5630.067Inserted Carbon R5630.060 R5630.061Tungsten Carbide R5630.072 R5630.073Silicon Carbide R5630.078 R5630.079NBR 5380.213 5380.221EPDM 5380.217 5380.225FPM 5380.215 5380.223PTFE 5380.219 5380.227Stainless Steel R7400.121 R5610.080Tungsten Carbide R7400.131 R5610.086Silicon Carbide R7400.181 R5610.092Stainless Steel R5610.079 R7400.122Tungsten Carbide R5610.085 R7400.132Silicon Carbide R5610.091 R7400.182

78 Grub Screw 6 6010.013 6010.01398 Washer 4 R6400.061 R6400.06299 Wave Spring (see note 1) 4 R6300.031 R6300.032100 Drive Ring 2 R5620.041 R5620.042

Note 1. If PTFE 'O' Rings are fitted it is necessary to use double wave springs for inboard seal only i.e. Qty 6.


S2 pump - Rotary Seal Assembly Inboard (74A) comprises of rotary seal ring, wave spring (99) and washer (98) . Rotary Seal Assembly Outboard (74B) comprises of rotary seal ring, wave spring (99), washer (98), grub screw (78) and drive ring (100).



2

Note: S1 pump - Rotary Seal Assembly Inboard (74A) comprises of rotary seal ring, wave spring (99), washer (98), drive ring (100) and grub screw (78). Rotary Seal Assembly Outboard (74B) comprises of rotary seal ring, wave spring (99) and washer (98).

4

74A

74BRotary Seal Assembly (outboard)

2

72Stationary Seal Ring (inboard or outboard)

Rotary Seal Assembly (inboard)



Drg S3 S4


78 Grub Screw 6 6010.013 6010.01598 Washer 4 R6400.063 R6400.06499 Wave Spring (see note 1) 4 R6300.033 R6300.034100 Drive Ring 2 R5620.043 R5620.044

Note 1. If PTFE 'O' Rings are fitted it is necessary to use double wave springs for inboard seal only i.e. Qty 6.




4

74ARotary Seal Assembly (inboard)

2

Note: Rotary Seal Assembly Inboard (74A) comprises of rotary seal ring, wave spring (99) and washer (98). Rotary Seal Assembly Outboard (74B) comprises of rotary seal ring, wave spring (99), washer (98), grub screw (78) and drive ring (100).



2



Drg S5 S6


78 Grub Screw 6 6010.014 6010.01898 Washer 4 R6400.065 R6400.066

Wave Spring (see note 1) 4 R6300.035 -Coil Spring 24 - R6300.036

100 Drive Ring 2 R5620.045 R5620.046Note 1. If PTFE 'O' Rings are fitted it is necessary to use double wave springs for inboard seal only i.e. Qty 6.


2

Note: Rotary Seal Assembly Inboard (74A) comprises of rotary seal ring, wave spring (99) and washer (98). Rotary Seal Assembly Outboard (74B) comprises of rotary seal ring, wave spring (99), washer (98), grub screw (78) and drive ring (100).



4

99



74ARotary Seal Assembly (inboard)

2


R90 Double Mechanical Seal - Exploded View Drawing


Hyclean Single Mechanical Seals (Complete) - S1 and S2 Pump Models


S1 S2

Part No. Part No.NBR 7600.101N 7600.102NEPDM 7600.101E 7600.102EFPM 7600.101V 7600.102VNBR 7600.181N 7600.182NEPDM 7600.181E 7600.182EFPM 7600.181V 7600.182VNBR 7600.201N 7600.202NEPDM 7600.201E 7600.202EFPM 7600.201V 7600.202V

S1 S2

Part No. Part No.Retaining Clip 4 5087.054 31494.5087.052Screw, Retaining Clip 4 5990.067 5990.067

Additional parts to convert pump fitted with above Hyclean seals to single flushed seals

Drawing S1 S2


Conversion kits comprising of:-Housing, BSPT 5265.423A 5265.388AHousing, NPT 5265.423B 5265.388B'O' Ring (FPM) 87 2 5380.273 1551.138Lip Seal (FPM) 88 2 5310.114 5310.107Screw, Housing - 4 5990.012 5990.011Note: Retaining clip and screw not required for flushed seals.

79 2

Qty



Description

Description



Qty

1



Hyclean Single Mechanical Seals (Complete) - S3 and S4 Pump Models


S3 S4


S3 S4

Part No. Part No.Retaining Clip 4 31495.5087.053 31495.5087.053Screw, Retaining Clip 4 5990.064 5990.064


Drawing S3 S4


Conversion kits comprising of:-Housing, BSPT 5265.389A 5265.390AHousing, NPT 5265.389B 5265.390B'O' Ring (FPM) 87 2 5380.399 5380.403Lip Seal (FPM) 88 2 5310.027 5310.109Screw, Housing - 4 5990.066 5990.066Note: Retaining clip and screw not required for flushed seals.

79 2

1

QtyDescription


QtyDescription






Hyclean Single Mechanical Seals (Complete) - S5 and S6 Pump Model


S5 S6


S5 S6

Part No. Part No.Retaining Clip 4 31495.5087.053 31495.5087.053Screw, Retaining Clip 4 5990.064 5990.064


Drawing S5 S6


Conversion kits comprising of:-Housing, BSPT 5265.391A 5265.411AHousing, NPT 5265.391B 5265.411B'O' Ring (FPM) 87 2 5380.407 5380.292Lip Seal (FPM) 88 2 5310.052 5310.068Screw, Housing - 4 5990.034 -Stud - 4 - 6350.105Nut - 4 - 5330.000Washer - 4 - 6400.037Note: Retaining clip and screw not required for flushed seals.





79 2

1Conversion kit - BSPTConversion kit - NPT

'O' Rings

QtyDescription

Description Qty


Hyclean Single Mechanical Seals (Parts) - Series S Pump Models

Drg S1 S2

No. Part No Part NoNBR 1550.320 31494.5001.1EPDM 1555.320 31494.5001.5FPM 1551.320 31494.5001.2

82 Wave Spring 2 R6300.039 31494.0508.1Solid Carbon R5630.092 31494.0501.2Silicon Carbide R5630.093 31494.0501.3Inserted Sil.Car. - 31494.0501.9NBR 1550.114 1550.121EPDM 1555.114 1555.121FPM 1551.114 1551.121Stainless Steel R5610.101 31494.0506.1Silicon Carbide R5610.102 31494.0506.3NBR 6400.086 6400.069FPM 6400.087 6400.073

Drg S3 S4

No. Part No Part NoNBR 31495.5001.1 31496.5001.1EPDM 31495.5001.5 31496.5001.5FPM 31495.5001.2 31496.5001.2

82 Wave Spring 2 31495.0508.1 31496.0508.1Solid Carbon 31495.0501.2 31496.0501.2Silicon Carbide 31495.0501.3 31496.0501.3Inserted Sil.Car. 31495.0501.9 31496.0501.9NBR 1550.124 1550.131EPDM 1555.124 1555.131FPM 1551.124 1551.131Stainless Steel 31495.0506.1 31496.0506.1Silicon Carbide 31495.0506.3 31496.0506.3NBR 6400.070 6400.071FPM 6400.074 6400.075

Drg S5 S6

No. Part No Part NoNBR 31497.5001.1 1550.339EPDM 31497.5001.5 1555.339FPM 31497.5001.2 1551.339

82 Wave Spring 2 31497.0508.1 31498.0508.1Solid Carbon 31497.0501.2 31498.0501.2Silicon Carbide 31497.0501.3 -Inserted Sil.Car. 31497.0501.9 31498.0501.3NBR 1550.137 5380.246EPDM 1555.137 5380.250FPM 1551.137 5380.248Stainless Steel 31497.0506.1 31498.0506.1Silicon Carbide 31497.0506.3 31498.0506.3NBR 6400.072 6400.079FPM 6400.076 6400.080


2Shaft 'O' Ring

81 Rotorcase 'O' Ring 2

84

84 Shaft 'O' Ring 2


86 Washer 2

81 Rotorcase 'O' Ring 2



Shaft 'O' Ring

85 Rotary Seal Ring

2

Rotorcase 'O' Ring 2


2

Washer 2


Rotary Seal Ring

2

86 Washer 2

85

85 Rotary Seal Ring

2

81

84

86


Hyclean Mechanical Seal - Exploded View Drawing


Hyclean Flushed Mechanical Seal - Exploded View Drawing


Packed Gland Seals - Pump Models S1 to S4

Drg S1 S2

No. Part No Part NoNBR 5380.316 5380.052EPDM 5380.416 5380.417FPM 5380.319 5380.053PTFE 5380.320 5380.283St. Stl. 6200.220 6200.204Hardened 6200.168 6200.169

3 Spacer 2 5670.080 5670.081Polyamide 5240.061 5240.062PTFE 5240.071 5240.072

5 Lantern Ring (if fitted) 2 5650.024 5650.0191 5198.201 -2 - 5198.100

Unflushed 5235.014 5235.016Flush BSPT 5235.014AA 5235.016AFlush NPT 5335.014BA 5335.016B

8 Gland Follower 2 5230.070 5230.0539 Slinger 2 5665.029 5665.02310 Screw 6 6010.011 6010.019

Nut 4 5330.036 5330.035Stud 4 6350.115 6350.103

Drg S3 S4

No. Part No Part NoNBR 5380.021 5380.030EPDM 5380.415 5380.410FPM 5380.019 5380.275PTFE 5380.284 5380.285St. Stl. 6200.212 6200.239Hardened 6200.213 6200.171

3 Spacer 2 5670.082 5670.083Polyamide 5240.063 5240.064PTFE 5240.073 5240.074

5 Lantern Ring (if fitted) 2 5650.020 5650.0216 Gasket 2 5198.101 5198.102

Unflushed 5235.018 5235.020Flush BSPT 5235.018A 5235.020AFlush NPT 5335.018B 5335.020B

8 Gland Follower 2 5230.054 -8a Split Gland Follower 4 - 5230.0808b Split Gland Follower Plate 4 - 5230.0878c Screw, Split Gland Follower 4 - 5990.0619 Slinger 2 5665.024 5665.02510 Screw 2 6010.019 6010.019

Nut 4 5330.035 5330.033Stud 4 6350.144 6350.125

Qty

6 Gasket

7 Housing

Housing

2

1 Shaft Sleeve 'O' Ring 2

2

4 Gland Packing 10

2 Shaft Sleeve 2

7

Description

All Series S pumps are fitted with 10 packing rings (i.e.5 per shaft) except S1, which has 8 packing rings (i.e. 4 per shaft). If a lantern ring is fitted, this replaces 1 packing ring on each shaft.


Description Qty

2 Shaft Sleeve 2

4 Gland Packing 10


Packed Gland Seals - Pump Models S5 and S6

Drg S5 S6

No. Part No Part NoNBR 5380.076 5380.136EPDM 5380.198 5380.134FPM 5380.077 5380.158PTFE 5380.192 5380.165

2 Shaft Sleeve 2 6200.172 6200.1733 Spacer 2 5670.084 5670.085

Polyamide 5240.065 5240.066PTFE 5240.075 5240.076

5 Lantern Ring (if fitted) 2 5650.022 5650.0236 Gasket 2 5198.103 5198.104

Unflushed 5235.022 5235.024Flush BSPT 5235.022A 5235.024AFlush NPT 5335.022B 5335.024B

8a Split Gland Follower 4 5230.078 5230.0828b Split Gland Follower Plate 4 5230.088 5230.0898c Screw, Split Gland Follower 4 5990.061 5990.0749 Slinger 2 5665.027 5665.02810 Screw 6 6010.014 6010.014

Nut 4 5330.033 5330.033Stud 4 6350.107 6350.108

All Series S pumps are fitted with 10 packing rings (i.e.5 per shaft) except S1, which has 8 packing rings (i.e. 4 per shaft). If a lantern ring is fitted, this replaces 1 packing ring on each shaft.


Description Qty

7 Housing 2

4 Gland Packing 10


Packed Gland Seal - Exploded View Drawing


Pressure Relief Valve (Complete) - Series S Pump ModelsComplete assembly includes rotorcase cover.For elastomers required: N = NBR, E = EPDM, V = FPM and P = PTFE.

S1 S2 S3

Part No. Part No. Part No.4083.001N 4083.002N 4083.003N4083.001E 4083.002E 4083.003E4083.001V 4083.002V 4083.003V4083.001P 4083.002P 4083.003P

4083.001N/HP 4083.002N/HP 4083.003N/HP4083.001E/HP 4083.002E/HP 4083.003E/HP4083.001V/HP 4083.002V/HP 4083.003V/HP4083.001P/HP 4083.002P/HP 4083.003P/HP

4083.101N 4083.102N 4083.103N4083.101E 4083.102E 4083.103E4083.101V 4083.102V 4083.103V4083.101P 4083.102P 4083.103P

4083.101N/HP 4083.102N/HP 4083.103N/HP4083.101E/HP 4083.102E/HP 4083.103E/HP4083.101V/HP 4083.102V/HP 4083.103V/HP4083.101P/HP 4083.102P/HP 4083.103P/HP

S4 S5Part No. Part No.

4083.004N 4083.005N4083.004E 4083.005E4083.004V 4083.005V4083.004P 4083.005P

4083.004N/HP 4083.005N/HP4083.004E/HP 4083.005E/HP4083.004V/HP 4083.005V/HP4083.004P/HP 4083.005P/HP

4083.104N 4083.105N4083.104E 4083.105E4083.104V 4083.105V4083.104P 4083.105P

4083.104N/HP 4083.105N/HP4083.104E/HP 4083.105E/HP4083.104V/HP 4083.105V/HP4083.104P/HP 4083.105P/HP

S6 standard S6 with lever liftPart No. Part No.

4083.006N 4083.106N4083.006E 4083.106E4083.006V 4083.106V4083.006P 4083.106P

4083.006N/ME 4083.106N/ME4083.006E/ME 4083.106E/ME4083.006V/ME 4083.106V/ME4083.006P/ME 4083.106P/ME4083.006N/HP 4083.106N/HP4083.006E/HP 4083.106E/HP4083.006V/HP 4083.106V/HP4083.006P/HP 4083.106P/HP

4083.006N/HP1 4083.106N/HP14083.006E/HP1 4083.106E/HP14083.006V/HP1 4083.106V/HP14083.006P/HP1 4083.106P/HP1

Std pressure< 10 bar

< 7 bar

< 10 bar

Valve type

Valve type

< 15 bar

Valve type

< 18 bar

High pressure> 12 bar (S1)> 10 bar (S2-3)with lever lift

Std pressure < 12 bar (S1)< 10 bar (S2-3)

High pressure> 12 bar (S1)> 10 bar (S2-3)

Std pressure< 12 bar (S1)< 10 bar (S2-3) with lever lift

High pressure> 10 bar

Std pressure < 10 barwith lever lift

High pressure> 10 barwith lever lift


Pressure Relief Valve (Parts) - S1 to S5 Pump Models

Drg S1-S3 S4-S5

No. Part No Part NoS1 5131.093 -S2 5131.094 -S3 5131.095 -S4 - 5131.096S5 - 5131.097S1 6130.035 -S2 6130.036 -S3 6130.037 -S4 - 6130.038S5 - 6130.039NBR 5380.030 5380.028EPDM 5380.410 5380.411FPM 5380.275 5380.035PTFE 5380.285 5380.303

4 Valve Pin 1 5170.027 5170.0285 Shim set St. Stl. 1 6150.323 6150.3246 Backstop disc 1 5135.009 5135.0107 'O' Ring (NBR), Backstop disc 1 5380.269 5380.291

8/15 Bush 2 5060.015 5060.0169 Screw, Backstop disc 4 5990.011 5990.012

Standard 6130.025 6130.028for lever lift 6130.034 6130.033

11 'O' Ring (NBR), Pneumatic piston 1 5380.267 5380.28912 Pneumatic Piston 1 6130.027 6130.03113 'O' Ring (NBR), Pneumatic piston 1 5380.268 5380.29014 Circlip 1 5090.007 5090.008

Standard 5245.002 5245.005For lever lift 5245.014 5245.012

17 Valve Guide Pin 1 5245.004 5245.007< 10 bar 6290.017 6290.021> 10 bar 6290.023 6290.024

19 Screw, spring guide 4 5990.046 5990.02420 Valve spring guide 4 5245.003 5245.00621 Valve spring adjuster 1 5015.009 5015.01022 Washer 1 - 6400.04823 Nut 1 5340.048 5340.049

Standard 5267.023 5267.024For lever lift 5267.026 5267.025Standard 1 5985.001 5985.001For lever lift 2 6000.009 6000.001

26 Screw, spring adjuster 4 5990.046 5990.050- Thrust washer 1 6400.055 6400.055- Nut 1 5330.033 5330.033- Thrust washer adaptor 1 6400.054 6400.054- Lever sub-assembly 1 4083.023 4083.022

Description Qty

4

1

Valve shaft 1

25 Screw, valve housing

1

1

Lever liftonly

18 Spring, compression

3 'O' Ring, Hydraulic Piston

Valve Guide

24 Valve housing

16

10

1 Rotorcase cover 1

2 Hydraulic Piston 1


Pressure Relief Valve (Parts) - S6 Pump Models

Drg S6

No. Part No1 Rotorcase cover 1 5131.0982 Hydraulic Piston 1 6130.030

NBR 5380.288EPDM 5380.412FPM 5380.301PTFE 5380.302

4 Valve Pin 1 5170.0285 Shim set St. Stl. 1 6150.3246 Backstop disc 1 5135.0107 'O' Ring (NBR), Backstop disc 1 5380.291

8/15 Bush 2 5060.0169 Screw, Backstop disc 4 5990.012

Standard 6130.028For lever lift 6130.033

11 'O' Ring (NBR), Pneumatic piston 1 5380.28912 Pneumatic Piston 1 6130.03213 'O' Ring (NBR), Pneumatic piston 1 5380.29014 Circlip 1 5090.008

Standard 5245.009For lever lift 5245.013

17 Valve Guide Pin 1 5245.007< 7 bar 144< 10 bar 192< 15 bar 216< 18 bar 240

19 Nut, spring guide 4 5330.02920 Valve spring guide 4 5245.01021 Valve spring adjuster 1 5015.01122 Washer 12 6400.04723 Nut 1 5340.054

Standard 5267.024For lever lift 5267.025Standard 1 5985.001For lever lift 2 6000.001

25a Washer, valve housing screw 1 6400.04626 Screw, spring adjuster 8 5990.050

Thrust washer 1 6400.055Nut 1 5330.033Thrust washer adaptor 1 6400.054Lever sub-assembly 1 4083.022

< 7 bar < 10 bar < 15 barSprings arranged: ( )( )( )( ) (( ))(( ))(( ))(( )) ((( )))((( )))((( )))1 stack = ( ) 2 springs (( )) 4 springs ((( ))) 6 springs

18 stacks/set 12 stacks/set 9 stacks/setQty sets each valve: 4 4 4Total qty springs: 144 192 216

6280.00218 Spring, disc

3 'O' Ring, Hydraulic Piston

10 Valve shaft

S6 Relief Valve Spring Arrangements

Valve Guide 1

24 Valve housing 1

25 Screw, valve housing

Lever liftonly

Note: For S6 Items 1 and 2 are only available as spare parts as part of complete assembly.

Qty

16

1

1

Description


Pressure Relief Valve - Exploded View Drawing


Rotorcase Cover Jackets - Series S Pump Models

Pump Model Description Qty Part No.Rotorcase cover drilled for jacket 1 5130.331Jacket - standard (for ATEX pump see 'ATEX Parts') 1 5268.025Screw 4 5990.012Rotorcase cover drilled for jacket 1 5130.332Jacket - standard (for ATEX pump see 'ATEX Parts') 1 5268.026Screw 4 5990.012Rotorcase cover drilled for jacket 1 5130.333Jacket - standard (for ATEX pump see 'ATEX Parts') 1 5268.027Screw 4 5990.012Rotorcase cover drilled for jacket 1 5130.334Jacket - standard (for ATEX pump see 'ATEX Parts') 1 5268.028Screw 4 5990.050Rotorcase cover drilled for jacket 1 5130.335Jacket - standard (for ATEX pump see 'ATEX Parts') 1 5268.029Screw 4 5990.050Rotorcase cover drilled for jacket 1 5130.336Jacket - standard (for ATEX pump see 'ATEX Parts') 1 5268.030Screw 4 5990.048

Rotorcase Saddles - Series S Pump Models

Pump Model Description Qty Part No.

Saddle - standard (for ATEX pump see 'ATEX Parts') 2 5268.031Screw 4 5990.043






See Pages 31-33

See Pages 31-33

S1

S2

S5

S6

S3

S4

Rotorcase drilled for saddle 1

S4

S1

S2

S3See Pages 31-33

S5



S6

See Pages 31-33

See Pages 31-33

See Pages 31-33





Jackets and Saddles - Exploded View Drawing


EPDM USP Class VI 'O' Rings and SealsDrg Description Qty Part No.No.

S1 1556.239S2 1556.249S3 1556.258S4 1556.265S5 1556.273S6 1556.277S1 5380.779S2 1556.022S3 1556.026S4 1556.030S5 1556.135S6 1556.143S1 5380.778S2 1556.020S3 1556.024S4 1556.029S5 1556.133S6 1556.143S1 KU1YCS2 KU2YCS3 KU3YCS4 KU4YCS5 KU5YCS6 KU6YCS1 1556.320S2 1556.325S3 1556.328S4 1556.332S5 1556.335S6 1556.339S1 1556.114S2 1556.121S3 1556.124S4 1556.131S5 1556.137S6 1556.230S1 7600.201YS2 7600.202YS3 7600.203YS4 7600.204YS5 7600.205YS6 7600.206YS1 KU1YC-H26S2 KU2YC-H26S3 KU3YC-H26S4 KU4YC-H26S5 KU5YC-H26S6 KU6YC-H26

11 'O' Ring, cover - plain 1

18 'O' Ring, rotor 2

20 'O' Ring, rotor nut 2

Cover/Spline Sealing Kit(comprises cover, rotor and rotor nut sealing 'O' rings for one pump)

1

81 Hyclean Rotorcase 'O' Ring 1

Service Kit (USA only)Hyc SC/SC/EPDM USP Class VI(comprises cover/spline sealing 'O' rings and mechanical seals for 1 pump)

1

84 Hyclean Shaft 'O' Ring 2

Hyclean Single Mech SealSC / SC / EPDM USP Class VI 2


Electropolishing (Rotorcase Covers and Rotors)Drg Description Qty Part No.No.

S1 5130.311EPS2 5130.312EPS3 5130.313EPS4 5130.314EPS5 5130.315EPS6 5130.316EP

8 bar 70°C 5712.005GEP8 bar 130°C S1-0005 5712.005HEP8 bar 200°C5 bar 70°C 5712.008DEP5 bar 130°C S1-0008 5712.008EEP5 bar 200°C 5712.008FEP10 bar 70°C 5740.013MEP10 bar 130°C 5740.013NEP10 bar 200°C 5740.013PEP15 bar 70°C15 bar 130°C15 bar 200°C7 bar 70°C 5740.018MEP7 bar 130°C 5740.018NEP7 bar 200°C 5740.018PEP10 bar 70°C10 bar 130°C10 bar 200°C10 bar 70°C 5740.027MEP10 bar 130°C 5740.027NEP10 bar 200°C 5740.027PEP15 bar 70°C15 bar 130°C 5740.027VEP15 bar 200°C7 bar 70°C 5740.038MEP7 bar 130°C 5740.038NEP7 bar 200°C 5740.038PEP10 bar 70°C10 bar 130°C10 bar 200°C10 bar 70°C 5740.055DEP10 bar 130°C 5740.055EEP10 bar 200°C20 bar 70°C 5740.055KEP20 bar 130°C 5740.055LEP20 bar 200°C7 bar 70°C 5740.079DEP7 bar 130°C 5740.079EEP7 bar 200°C15 bar 70°C 5740.079KEP15 bar 130°C 5740.079LEP15 bar 200°C

12 Cover, rotorcase - EP 1

17 Rotor, Trilobe Stainless Steel - EP 2

S2-0013-H10 & V10

S2-0013-H15 & V15

S2-0018-H07 & V07

S2-0018-H10 & V10

S4-0079- H07 & V07

S4-0079- H15 & V15

S3-0027-H10 & V10

S3-0027-H15 & V15

S3-0038-H07 & V07

S3-0038-H10 & V10

S4-0055- H10 & V10

S4-0055- H20 & V20


Electropolishing (Rotors cont'd and Rotor Nuts)Drg Description Qty Part No.No.

10 bar 70°C 5740.116DEP10 bar 130°C 5740.116EEP10 bar 200°C20 bar 70°C 5740.116KEP20 bar 130°C 5740.116LEP20 bar 200°C7 bar 70°C 5740.168DEP7 bar 130°C 5740.168EEP7 bar 200°C15 bar 70°C15 bar 130°C15 bar 200°C10 bar 70°C 5740.260DEP10 bar 130°C 5740.260EEP10 bar 200°C20 bar 70°C20 bar 130°C20 bar 200°C7 bar 70°C 5740.353DEP7 bar 130°C 5740.353EEP7 bar 200°C15 bar 70°C15 bar 130°C15 bar 200°C

S1-0005 5900.161EPS1-0008 5900.162EPS2-0013 5900.163EPS2-0018 5900.164EPS3-0027 5900.165EPS3-0038 5900.166EPS4-0055 5900.167EPS4-0079 5900.168EPS5-0116 5900.169EPS5-0168 5900.170EPS6-0260 5900.171EPS6-0353 5900.172EPS1-0005 5900.181EPS1-0008 5900.182EPS2-0013 5900.183EPS2-0018 5900.184EPS3-0027 5900.185EPS3-0038 5900.186EPS4-0055 5900.187EPS4-0079 5900.188EPS5-0116 5900.189EPS5-0168 5900.190EPS6-0260 5900.191EPS6-0353 5900.192EP

S5-0168- H07 & V07

S5-0168- H15 & V15

S6-0260- H10 & V10

S6-0260- H20 & V20

S6-0353- H15 & V15

22

Nut, rotor retention (RH) - EP

2

Nut, rotor retention (LH) - EP

17 Rotor, Trilobe Stainless Steel - EP

S5-0116- H10 & V10

2

S5-0116- H20 & V20

S6-0353- H07 & V07


Electropolishing (Rotorcase)Drg Description Pump Qty Part No.No. in mm

1 25 S1-0005 9285.082SEP1 25 S1-0008

1½ 40 S1-0008 9286.083SEP1 25 S2-0013

1½ 40 S2-0013 9211.083SEP1½ 40 S2-0018 9212.274SEP2 50 S2-0018 9212.084SEP

1½ 40 S3-0027 9213.274SEP2 50 S3-0027 9213.084SEP2 50 S3-0038 9214.271SEP

2½ 65 S3-0038 9214.086SEP2 50 S4-0055 9215.271SEP

2½ 65 S4-0055 9215.086SE2½ 65 S4-00793 80 S4-0079 9216.149SEP

2½ 65 S5-0116 9217.323SEP3 80 S5-0116 9217.149SEP3 80 S5-01684 100 S5-0168 9218.150SEP4 100 S6-0260 9423.088SEP4 100 S6-03536 150 S6-0353 9220.300SEP

Size

9 Rotorcase for Hyclean seal and Tri- clamp (BS4825) connections 1


ATEX PartsDrg Description Qty Part No.No.

S1-4 1Horiz port 2Vert port 1

S1-4 1Horiz port 2Vert port 1

Washer, bonded - for filler plug NBR 1 / 2 31499.5916.1S1 5243.136S2 5243.137S3 5243.138S4 5243.139

Lower vert port 5243.148Upper vert port 5243.150Horiz port 2 5243.134Lower vert port 5243.149Upper vert port 5243.151Horiz port 2 5243.152

S1 R5630.181S2 R5630.182S3 R5630.183S4 R5630.184S5 R5630.185S6 R5630.186S1 R5630.191S2 R5630.192S3 R5630.193S4 R5630.194S5 R5630.195S6 R5630.196S1 5265.221A.TS2 5265.325A.TS3 5265.326A.TS4 5265.327A.TS5 5265.328A.TS6 5265.329A.TS1 5087.081S2 5087.082S3 5087.083S4 5087.084S5 5087.085S6 5087.086S1 5990.007S2-3 5990.066S4-6 5990.083

103 Plastic bush S1-6 1 5060.021104 Screw, bush locking S1-6 1 5990.088

S1 5268.091S2 5268.092S3 5268.093S4 5268.094S5 5268.095S6 5268.096S1 5268.081S2 5268.082S3 5268.083S4 5268.084S5 5268.085S6 5268.086S1 6350.148S2-4 6350.149S5-6 6350.148

Nut, earthing stud 2 5330.003Washer, lock 2 6410.009Earth bonding cable 1 4450.222Terminal copper tube 2 4450.223Earth bonding tag 1 5410.088

102 Screw, thermocouple clamp plate 2

Stud, earthing 1

Jacket, rotorcase cover (stainless steel) 1

Saddle, rotorcase (stainless steel) 2

79Seal housing, double mechanical seal for thermocouple (R90 Double mechanical seal) Note: Normally 1 off is req'd as other seal housing will be as standard

1

101 Thermocouple clamp plate 1

72bStationary seal ring with thermocouple (R90 Single mechanical seal). Note: Only silicon carbide available and normally 1 off is req'd as other seal ring will be as standard silicon carbide

1

72cStationary seal ring with thermocouple (R90 Double mechanical seal) Note: Only silicon carbide available and normally 1 off is req'd as other seal ring will be as standard silicon carbide

1

50 Gland guard

2

S5 1

S6 1

47 Filler plug 5192.286S5-6

46 Sight glass 5480.010S5-6


Miscellaneous Items

S1-S6

Part No.1/8" BSPT 5470.0001/8" NPT 5470.0061/4" BSPT 5470.0011/4" NPT 5470.004

Grease filled gearboxes in gearcases drilled for oil.If Gearcase is drilled for Oil and supplied for Grease then the same fixings are required as for Oil, EXCEPTthat Unvented Filler Plug 31495.0052.1 is used instead of 31491.0052.1 and 5480.001

4

The following housings have 1/8" connectionsR90 Flush and Double sizes S1-S3Hyclean Flush sizes S1-S4Packed Gland sizes S1-S4The following housings have 1/4" connectionsR90 Flush and Double sizes S4-S6Hyclean Flush sizes S5-S6Packed Gland sizes S5-S6

QtyDescription

Plug, Seal Housing


Revision History

Issue Ref Date Description

- SRU range introduced and replaces SR/3A and NMOG pump ranges.(SR/3A SS and SD versions still available to special order only.)

CH5808 The gearboxes on sizes SRU1-4 revised to universal mounting with bolt-on feet for either horizontal or vertical porting.

CH5809 Gearboxes on sizes SRU5-6 remained as dedicated for either horizontal or vertical porting but standardised to one external shape.

CH5808CH5809 Grease lubrication withdrawn as a standard option.

CH5817CH5834

SRU6/260 introduced to replace SR6/246/3A and NMOG822 to provide increased bore size on 4" ports.

CH5804 Sanitary size port bores introduced throughout range (CH5804, CH5758, CH5812, CH5813, and CH5814).

CH5793Shim retainers standardised to one item per pump size that is suitable to fit both the SRU and for spares requirements on discontinued SR, SR/3A and NMOG ranges.

CH5795 SRU1-4 timing gears revised to hardened as standard.CH5816 New style gland guards introduced.

CH5825CH5826

Bilobe rotors revised to have the master spline at 45 deg which allows both rotors in the pump to be identical instead of 'handed'.

CH5839 Hyclean flushed lip seals standardised to fully enclosed FPM with stainless steel spring.

2001-02 TM 01/02/2001 New manual issue 1 ref SP70844-GB1

1.01 CH Pump drg item no 14A (gasket) deleted. The gaskets are no longer available and silicone sealant (item Z3717.0001) is used.

1.02 CH5883 05/03/2001 Pump drg item no 46A (sight glass washer) deleted. The sight glass 5480.001 has been changed to include an integral washer.

1.03 CH5884 06/03/2001 SRU1 and SRU2 Pump drg item no. 51/52 gland guard screws revised to 4 off part 6000.010 instead of 4 off 5990.045 and 4 off washers 6400.046.

1.04 CH5905 26/04/2001Pump drg item no 40 (screw) revised on pump sizes SRU2 and SRU3. SRU2 part number updated from part 5990.044 to part 5990.007.SRU3 part number updated from part part 5990.007 to part 5990.005.

1.05 Pump drg item no 1 (gearcase) and drg items 54 and 56 (feet) revised to indicate part and item numbers for painted Burgundy.

1.07 SRU1 Pump drg item no. 11 (PTFE) part number corrected from 1550.239 to part 1552.239.

1.08 SRU1 Pump drg item no. 18 (FPM) part number corrected from 5380.566 to part 5380.420.



1.12 SRU5 Pump drg item no. 8A corrected from part 6150.256 to part 6150.315 as per above CH5793.

1.15 SRU1 R90 flush housing gasket corrected to part number 5198.201 and quantity to 1 per pump as per CH5234 (1997).

1.16 SRU4 R90 flush housing studs, nuts and washers corrected to screws part number 5990.078 as per CH5151 (1996).

1.17 SRU5 R90 flush housing studs corrected to part number 6350.104.1.18 Details of Hyclean retaining clips and screws added.1.19 SRU1 Hyclean housing 'O' ring corrected to part number 5380.273.1.20 SRU2 Hyclean housing 'O' ring corrected to part number 1551.138.1.21 SRU5 Hyclean housing 'O' ring corrected to part number 5380.407.

SRU

INTR

OD

UC

TIO

N

Febr

uary

200

1


Revision History (continued)


1.22 SRU6 Hyclean housing 'O' ring corrected to part number 5380.292.

1.23 Details of stainless steel shaft sleeves added to SRU1-4 packed gland arrangements.

1.24 SRU1 packed gland flush housings corrected to part numbers 5235.014AA and 5235.014BA.

1.25 SRU1 packed gland housing gasket corrected to part number 5198.201 and quantity to 1 per pump as per CH5234 (1997).

1.26 Packed gland housing stud nuts corrected as per CH5093 (1996).1.27 SRU4-6 gland followers corrected to split type as per CH4831 (1994).1.28 SRU2 Pump drg. Item no. 2 dowel, part number corrected to 5170.025.

1.29 SRU3 Packed gland stud corrected to part number 6350.144 as per CH5654 (1999).

Series S NOV2002

Series S range introduced with new nomenclature and replaces SRU for SSP sales channels.

2 0211 01/11/2002 NEW MANUAL SERIES S2.01 13/05/2003 Part numbers of S4 Cover/Spline Sealing kits on p.35 corrected.

3 0503 01/03/2005 Manual updated to include latest R90 and Hyclean seal drawings and parts list.

3.01 CH10707 01/03/2005

Hyclean drive and auxiliary shafts now only available in Duplex material. Hyclean stainless steel shaft part numbers removed (S2 - 6100.656 & 6110.656, S3 - 6100.657 & 6110.657, S4 - 6100.658 & 6110.658, S5 - 6100.659 & 6110.659, S6 - 6100.708 & 6110.708).

3.02 CH10672 01/03/2005 Note added to p.39, 40, 50, 51 and 52 relating to use of double wave springs.

3.03 30/01/2006 Rotorcase body part numbers table modified.

3.04 CH-10981 30/01/2006 NBR, EPDM and PTFE Spacer 'O' ring options removed, leaving only FPM available.

3.05 30/01/2006

Hyclean stainless steel shaft part numbers previously removed now reinstated (S2 - 6100.656 & 6110.656, S3 - 6100.657 & 6110.657, S4 - 6100.658 & 6110.658, S5 - 6100.659 & 6110.659, S6 - 6100.708 & 6110.708).

3.06 CH-10992 30/01/2006 EPDM USP Class VI 'O' rings and seals p.69 added.3.07 30/01/2006 Electropolished parts p.70-72 added.3.08 28/02/2006 ATEX parts added.3.09 CH-10702 28/02/2006 Feet gaskets removed S1-4. Exploded view drawings amended.

3.10 CH-10847 28/02/2006 S3 Vertically ported foot part number changed from 5225.403.00 to 5225.413.00

4 0603 01/03/2006 NEW ISSUE4.01 08-04-2008 Non-applicable4.02 08-04-2008 Bonded washer part number 31499.5916.1 added to ATEX parts.4.03 08-04-2008 Non-applicable

4.04 CH-11028 08-04-2008 Part number 6150.324 added to shim set for S6 pressure relief valve parts.

4.05 08-04-2008 Note referring to qty of packing rings amended on p.62 and p.63

4.06 08-04-2008 Part and item corrected to 5380.292 for S5-0116 'O' ring for rectangular-round adaptor.

4.07 07-07-2008 Part and item numbers added for SRU6 'O' ring for rectangular-round adaptor.

4.08 07-07-2008 For SRU2-6 Rotary Seal Assembly description corrected to show drive ring included in 74B and not 74A.

4.09 07-07-2008 Service Kits added to include Cover/Sealing Kits and R90/Hyclean Single Mechanical Seals.


Revision History (continued)


4.10 CH-11233 23-09-2009

R90 single and double flushed seal housing gasket replaced by 'o' ring for S2-6. Part No.s 5198.100, 5198.101, 5198.102, 5198.103 and 5198.104 replaced by 1551.034, 1551.037, 1551.532, 1551.044 and 1551.048 respectively.

4.11 CH-11244 23-09-2009For rectangular/round adaptor on S2 pump the stud/nut fixing now replaced by cap screw fixing . Part No.s 6350.018 and 5330.007 therefore replaced by 5990.052

4.12 CH-11272 23/09/2009 S6 relief valve bush part number 5060.011 replaced by 5060.016


series s spares - matrixps.com · rotor, trilobe, nbr covered s2-0013 5722.013 7 bar 70°c...

Documents