series p - targetec€¦ · model p-7 1/2ak flows from 9 to 175 gpm pressure to 166 ft. tdh as a...
TRANSCRIPT
Bulletin 201M 10/07
Penguin vertical immersible pumps are compact, portable, and self-priming when immersed. Simple in design and effi cient in performance, this pump has only one moving part. Constructed completely of CPVC, polypropylene, or PVDF where in contact with the solution, this pump is suitable for pumping, agitating, fi ltering, or circulating acid and alkaline solutions (pH 0-14), abrasive fl uids, and other cor-rosive solutions. Maximum temperature ratings are as follows: CPVC-180ºF, polypropylene-150ºF, and PVDF-260ºF. Because PVDF is ultra pure, it is rec-ommended for use in high purity deionized water, HF, and liquids that must remain contamination free. The Penguin vertical pump has a rigid, solid stain-less steel, one-piece rotor drive shaft covered with a two-piece sleeve and impeller. Titanium shafts are available as an option. Because of the unique double impeller design, this pump has no seals, no pump bearings, no bushings, no wearing parts, and thus bearings, no bushings, no wearing parts, and thus requires little maintenance.requires little maintenance.
Features:• Choice of CPVC, PVDF, or Polypropylene• Sealless• Runs Dry Without Damage• Self-Priming When Immersed• No Metal Contact• Chemical Resistant • Extended Pump Lengths Available (See Bulletin 216)
Recommended Applications:• Sump Pumping / Draining• Transfer Pumping• Recirculation Pumping• Plating • Wet Fume Scrubbing• Waste Treatment• Wet Processing• Etching• Filtering
Model P-7 1/2AK
Flows from 9 to 175 GPMPressure to 166 Ft. TDH
As a standard feature on our P-1/4 HP model and up, the Penguin vertical pump comes equipped with a plugged air purge in the bottom (shaft end) endbell of the motor. If utilized, this air purge requires a minimum of 5 psi to create a positive displacement, extending the life of the lower motor bearing.
The Penguin vertical pump is equipped with a totally enclosed fan cooled (TEFC) motor. Most motor hous-ings come standard with epoxy coating for additional corrosion resistance and oversized shaft end bearings for longer life and easy replacement. Single phase motors are wired 115V and equipped with a 6 foot cord and grounded plug unless otherwise specifi ed. All three phase motors are shipped unwired.
Penguin vertical pumps are versatile, easy to install, and require a minimal amount of tank space, thus saving valuable fl oor space. Most can be easily moved from tank to tank, with mounting either internally or externally on the tank fl ange.on the tank fl ange.
Series PSeries PSeries P
PenguinVertical Pump
Series PSeries PSeries P
PenguinVertical Pump
10
5 10 15.01.02.03.04.05.06.07.08HP
ABSO
RBED
PO
WER
60 Hz
50 Hz
5
TDH
2
M FT.
GPM19 38 LPM
FLOW(GPM/LPM)
3
57
.01
.02
.03
.04
.05
.06
.07
.08
50 Hz
60 Hz10
15
5 10 15 20 25
20
HP
AB
SOR
BED
PO
WER
30
5
TDH
2
6
5
M FT.
GPM19 38 57 76 LPM
FLOW(GPM/LPM)95 114
3
10
15
5 10 15 20 25
20
.1
.2
.3
.4
HP
AB
SOR
BED
PO
WER
30
50 Hz
60 Hz
5
TDH
60 Hz
50 Hz
2
6
5
M FT.
GPM19 38 57 76 LPM
FLOW(GPM/LPM)95 114
3
Performance ChartsP-1/15
P-1/6
P-1/4
1
2
3
4
5
6
7
1. Motor fan cover with drip shield.2. Standard TEFC Epoxy coated motor.3. Air purge plug.4. One-piece stainless steel rotor shaft assembly. Optional 316 SS or Titanimm shaft available on most models.5. Viton vapor seal/fume barrier assembly.6. Sleeved O-ring sealed compound impeller for non metallic 6. Sleeved O-ring sealed compound impeller for non metallic solution contact.7. Overfl ow.
Penguin Design FeaturesOn Most Models
2
Series PSeries PSeries PPenguinVertical Pump
5
10
15
10 20 30 40.1.2
.3
.4
.5
.6
.7
.8HP
GPMAB
SORB
ED P
OWER
20
TDH
60 Hz
60 Hz
50 Hz
50 Hz
FT.
6.0
M
LPMFLOW(GPM/LPM)
1.5
4.5
3.0
38 76 114 151
Performance ChartsPerformance Charts
FLOW(GPM/LPM)
18
3
6
9
12
15
M
38 76 114 151 190 227 LPM265 303
.25
.50
.75
1.00
HP
AB
SOR
BED
PO
WER
1.25
60 Hz
60 Hz
50 Hz
50 Hz
10 20 30 40 50 60 70 80
10
20
30
40
50
60
TDH
FT.
GPM
1.50
P-1/2
P-3/4
P-1/2-HP
P-3/4-HP
P-1
P-1 1/2
3
10 20 30 40 50.1.2
.3
.4
.5
.6
.7
.8HP
ABSO
RBED
POW
ER
30
60
50 Hz
60 Hz
5
10
15
20
25
TDH
FLOW(GPM/LPM)
60 Hz
50 Hz
9
2
3
5
6
8
M FT.
GPM38 76 114 151 190 227 LPM
FLOW(GPM/LPM)
18
3
6
9
12
15
M
38 76 114 151 190 227 LPM265 303
.25
.50
.75
1.00
HP AB
SO
RB
ED
PO
WE
R
1.25
60 Hz
60 Hz
50 Hz
50 Hz
10 20 30 40 50 60 70 80
10
20
30
40
50
60
TDH
FT.
GPM
30
.25
.50
.75
1.00
1.25
1.50
HP
AB
SO
RB
ED
PO
WE
R
10 20 30 40 50 60 70
10
20
60HZ
50HZ
60HZ50HZ
TDH
3
6
9
M FT.
GPM38 76 114 151 190 227 LPM
FLOW(GPM/LPM)265
.51.01.5
HP
AB
SOR
BED
PO
WER
10 20 30 40 50 60 70 80 90
10
20
30
40
50
60
70 60HZ
50HZ
60HZ
50HZ
TDH
21
3
6
9
12
15
M FT.
GPM38 76 114 151 190 227 LPM
FLOW(GPM/LPM)
18
265 303 341
Performance ChartsP-2 P-3
P-7 1/2P-5
4
Performance Charts
100 120
40
50
60
70
80
90
100
60 Hz
50 Hz
50 Hz20 40 60 80
.51.01.52.02.53.0HP
FLOW(GPM/LPM)
18
3
6
9
12
15
M
76 151 227 LPM303
AB
SO
RB
ED
PO
WE
R
60 Hz
10
20
30
TDH
FT.
GPM379 454
21
24
27
31
1038
519
.51.01.52.02.53.0HP
160
FLOW(GPM/LPM)
18
3
6
9
12
15
M
76 151 227 LPM303
AB
SO
RB
ED
PO
WE
R
10
20
30
TDH
FT.
GPM
60 Hz
379 454 530 606
21
24
2731
100 120 140
40
50
60
70
80
90
100
60 Hz
50 Hz
50 Hz20 40 60 80
120
140
160
1.02.03.0
HP
160
FLOW(GPM/LPM)
18
6
12
M
76 151 227 LPM303
AB
SO
RB
ED
PO
WE
R
20
TDH
FT.
GPM
60 Hz
379 454 530 606
24
31
100 120 140
40
60
80
100
60 Hz
50 Hz
20 40 60 80 180681
200757
37
43
49
4.05.06.07.08.0
50 Hz
120
140
160
1.0
2.0
3.0
HP
160
FLOW(GPM/LPM)
18
6
12
M
76 151 227 LPM303A
BSO
RB
ED P
OW
ER
20
TDH
FT.
GPM
60 Hz 6"
379 454 530 606
24
31
100 120 140
40
60
80
100
60 Hz 6"
50 Hz 7"
50 Hz 6"
20 40 60 80 180
681
200
757
37
43
49
4.0
5.0
6.0
7.0
8.0
50 Hz 7"
50 Hz 6"
7-1/2”
7-3/8”(ref)
3”
4-1/2” 5-1/2”
1”
3/8”ø
15/16”
Mounting Diagram P3 - P7 1/2Mounting Diagram P1/2 - P2
6.50”6.50”
4 SLOTS.34 WIDE
4.88”4.88”
4.32”
3”3”
Series PSeries PSeries PPenguinVertical Pump
P-1/15
5
Model A B C D E F G H Suction DischargeP-1/15 2 1/2 2 1/2 5 3/4 9 3/8 2 3/8 14 3/8 3 3/4 5/8 3/4 MPT 1/2 FPTP-1/6 2 1/4 3 1/4 6 1/2 8 7/8 1 1/2 4 1P-1/4 3 1/2 8 9 3/8 19 5/8 5 1 1/8 1 FPT 3/4 FPTP-1/2 3 3/4 3 3/4 10 3/4 1 3/4 23 1/4 6 1/2 1 1/4P-1/2HP 4 1/2 5 1/2 10 3/8 2 22 5/8 6 1 5/8 1 1/2 FPTP-3/4 3 3/4 3 3/4 10 3/4 1 3/4 23 1/4 6 1/2 1 1/4 1 1/4 FPTP-3/4HP 9 1/4 1 MPTP-1 4 1/2 5 1/2 10 3/8 2 22 5/8 6 1 5/8 1 1/2 FPTP-1 1/2P-2 23 3/4P-3* 6 7 12 12 1/2 3 28 1/4 12 2 1/8 1 1/2MPTP-5* 2 FPTP-7 1/2 5 1/2 5 15 3/10 12 2 5/8 28 3/4 3 1/8
Dimensions
P-1/4
P-1/2-P-2
P-1/6
SEE NOTES
Top View
P-7 1/2P-3 & 5
Series PSeries PSeries P
PenguinVertical Pump
Series PSeries PSeries P
Nomenclature
P XX X - XX - XX - XX - XX
PenguinVerticalPump
Horsepower Construction Material/O-Ring Elastomer Material
Impeller/HousingConfi guration
Shaft Confi guration
ShaftMaterial
PumpBracket Confi g.
1/15=1/151/6=1/61/4=1/31/2=1/23/4=3/41=11 1/2=1 1/22=23=35=57 1/2=7 1/2
A = CPVC/EPR B = Polypropylene/EPR C = PVDF/Viton
None = StandardHP = High Pressure
None = ThreadedK = Keyway/Thrd Screw&Nut
None = 316SS T = Titanium
None=BracketRB = Round FlangeDP = Bracket Rigid Plumbed
“RB” round fl ange applies to models P3, P5 & 7 1/2 only.“B” polypro and “C” PVDF models are only available with RB round fl ange confi guration.“A” CPVC models are available with standard bracket.Optional “RB” includes round fl angeOptional “DP” includes bracket and rigid plumbed confi gurations.
1
1
“K” Keyway impeller-P3, P5 & P7-1/2“K” Threaded screw/w nut impeller-1/2HP, 3/4HP, 1, 1-1/2, 2
2
2
SpecificationsMax Max Max Max
Model Flow Head Flow Head Motor Dimensions(gpm) (ft) 50HZ (LPM) 50HZ (M) HP RPM Volts Hertz Phase Amps Ht Wth Lth Wt
P-1/15 12 9 10 6 1/15 3000/2450 115 2.0 10 10 18 91/25 3300/2700 208-230 0.9-0.8
P-1/6 22.5 18 19 12 1/6 3200 115 60/50 1 2.0 19 112675 208-230 1.3-1.2
P-1/4 33 18.5 27 13 1/3 3450 110/220 5.4/2.7 272850 230/460 3 1.2/0.6 26
115/230 60 1 7.8/3.9 45P-1/2 40 23 33 16 6.4/3.2 47
1/2 208-230/460 60/50 3 1.9-1.8/.09 43115/230 60 1 7.8/3.9 45
P-1/2HP 66 35 55 24 60/50 6.4/3.2 11 11 26 47208-230/460 3 1.9-1.8/9 43
115/230 60 1 9.8/4.9 47P-3/4 64 27.5 53 19 3/4 60/50 10/5 48
208-230/460 3 2.7-2.6/1.3 46115/230 60 1 9.8/4.9 47
P-3/4HP 70 46 58 31 3/4 3450 60/50 10/5 482850 208-230/460 3 2.7-2.6/1.3 46
115/230 60 1 11/5.5 50P-1 74 52 61 36 1 60/50 12.8/6.4 52
208-230/460 3 3.4-3.2/1.6 47P- 1 1/2 82 62 68 42 1 1/2 115/230 1 17.8/8.9 55
208-230/460 4.9-4.6/2.3 48P-2 112 69 93 47 2 5.8-5.4/2.7 60P-3 135 88 112 60 3 8.2-7.8/3.9 100
208-230/460 3P-5 172 122 142 83 5 12.2-11.6/5.8 21 16 36 120
P-7 1/2 175 166 145 113 7 1/2 20.5-19.0/9.5 130
Bulletin 201M 10/07
Penguin Vertical Pump