series blower series 4307 packages series...4307 challenger pro pak series blowers all pro paks...
TRANSCRIPT
natvac.com
MADEIN USA
800-253-5500 | 800-998-6834 FAX | [email protected]
4307 Packages
Reliable – Efficient – Cost Effective
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
National Vacuum Equipment Locations in Michigan & Texas
• Continuous duty performance at maximum vacuum• Tri-lobe design with precision machining• Ballast port manifold - cools blower through air injection• Range of airflow - performance available to accommodate power• Oil-less operation
• 4” hose barbed adjustable porting for intake and exhaust• Integral final filter with easy access cleaning• 4-Way pressure/vacuum change over valve• Designed, built, and supported in the USA
Product Features:
560 CFM
4307 Max Pak
4307 Pro Pak
Part Number 147-4307-001 147-4307-005 147-4307-004 147-4307-010 147-4307-006
Drive Gearbox Gearbox Hydraulic Hydraulic Hydraulic
Enclosed No No No No No
Ballast Silencer Yes Yes Yes Yes Yes
Exhaust Silencer Yes No Yes No No
Moisture Trap No Yes No No Yes
4307 Challenger Max Pak Series Blowers
All Max Paks contain:• 560 CFM 4307 tri-lobe blower with complete manifold• Stainless steel intake and ballast air silencer• Powder coat painted 3/8” steel mounting bracket• All elbows, fittings and high temp hoses are factory connected • Diesel flush kit• Optional remote mounted silencer
10.001”
47.910”
26.50”10.70” 10.70
29.038”
30.7732”
48.455”
26.50” 10.70
10”
7.70”
7.702
Available Drive Options:Gear Box, and Hydraulic
Available Configurations: • Blower & stand• Blower, stand & ballast silencer • Blower, stand, ballast silencer & exhaust silencer• Blower, stand, ballast silencer, exhaust silencer & moister trap
4307 Challenger Pro Pak Series Blowers
All Pro Paks contain:• 560 CFM 4307 tri-lobe blower with complete manifold• Sound dampening integrated ballast silencer• Stainless steel intake and ballast air silencer• Powder coat painted 3/8” steel mounting bracket• All elbows, fittings and high temp hoses are factory connected • Stainless steel sound enclosure • Diesel flush kit
Part Number 147-4307-220 147-4307-223 147-4307-221 147-4307-224 147-4307-222
Drive Gearbox Gearbox Hydraulic Hydraulic Belt
Enclosed Yes Yes Yes Yes Yes
Integrated Ballast Silencer Yes Yes Yes Yes Yes
Exhaust Silencer No Yes No Yes No
Moisture Trap No No No No No
46.0625”
29.8125”
45.5”
34.25”
46.0625”
29.8125”
34.25”
35.75”
Available Drive Options:Gear Box, Hydraulic, and Belt
Available Configurations: • Blower, enclosure, integrated ballast silencer • Blower, enclosure, integrated ballast silencer, exhaust silencer
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIEDOne place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°Fractional (X/X) ±1/16All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:MEM
PART NO.SHEET10 4310 FRAME MOUNT BD PACKAGE1 of
APPROX. WT.CAD FILE LOCATION: I:\Engineering\Projects\1304 4307 Frame Mount Belt
Drive\Cad Data\4310 STAND\4310 FRAME MOUNT BD PACKAGE.idw
SHEET SIZE D
4310 FRAME MOUNT BELT DRIVE
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 12/23/14 CONCEPT DRAWING CREATED MEM
4'- 1/8" 1'-3"
1'-7 3/8"1'-5 1/2"
7 3/8"
11 7/8"
11 1/4"
1'-1 1/2"
6"
1'-6 1/2"
CCW ROTATION2000 RPM @ JACKSHAFT = 4000 RPM @ BLOWER
1'-5 3/8"
2'-7 3/4"
2'-5 3/4"
For over 30 years NVE has been providing quality vacuum system components to the liquid waste markets. From design, to development to product support, NVE IS the industry leader.
In addition to our team of engineers and highly qualified support staff, NVE has a state of the art machine shop, fabrication shop, and powder coat paint facility housed in two plants in Traverse City, Michigan. We also have a warehouse and sales support facility in Mansfield, Texas.
For questions and additional information please contact your dealer or NVE direct at 800.253.5500.
Thank you,
4307 Challenger Series Components and Accessories
DISTRIBUTED BY:
©2013 National Vacuum Equipment, Inc. | Revised 02/2014
Blower4310Series
Series
607-
SeriesVacuum pumps & Blowers
Factory designed, tested, and built specifically for our blowers. Takes the guess work out of designing your mounting system. Several options are available to choose from.
Round Silencer
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2670 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ± 1/8Two places (.XX) ± 3/32Three places (.XXX) ± 1/16Angles ± 1°Remove all weld spatter after welding.All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
ROUND SILENCER, 4310 FLANGED ENDS
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:JGP
PART NO.SHEET3 224-4310-022 of
SEE PARTS LIST
SHEET SIZECAD FILE LOCATION: P:\Data\CAD - Production\224-4310-02.idw APPROX. WT.
C48 5/8"
36"
1414
9
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 2/17/11 RELEASED FOR PRODUCTION JGP N/AB 5/11/2011 ADDED DIRECTION OF FLOW SHT 1 ECN 1228 -
C 9/13/2011FLAT PATT -02-4 OD12.00 WAS 12.38
ID 4.63 WAS 4.88-02-3 FLAT PATT ID 4.375 WAS 4.63
ECN 1296 FP
D 11/3/2011 INNER SHELL DIM 36.875 FROM 37.50 ECN 1333
E 11/7/2011ADDED MAT'L TO PARTS LIST & PERF
STOCK HOLE DIA TO P/N 224-4310-02-10
ECN 1338
• Stainless steel internals and carbon steel shell• Installs anywhere, in any position• Works with 4307 & 4310 • 4” TTMA flanged fittings
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2670 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ± 1/8Two places (.XX) ± 3/32Three places (.XXX) ± 1/16Angles ± 1°Remove all weld spatter after welding.All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
ROUND SILENCER, 4310 FLANGED ENDS
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:JGP
PART NO.SHEET3 224-4310-022 of
SEE PARTS LIST
SHEET SIZECAD FILE LOCATION: P:\Data\CAD - Production\224-4310-02.idw APPROX. WT.
C48 5/8"
36"
1414
9
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 2/17/11 RELEASED FOR PRODUCTION JGP N/AB 5/11/2011 ADDED DIRECTION OF FLOW SHT 1 ECN 1228 -
C 9/13/2011FLAT PATT -02-4 OD12.00 WAS 12.38
ID 4.63 WAS 4.88-02-3 FLAT PATT ID 4.375 WAS 4.63
ECN 1296 FP
D 11/3/2011 INNER SHELL DIM 36.875 FROM 37.50 ECN 1333
E 11/7/2011ADDED MAT'L TO PARTS LIST & PERF
STOCK HOLE DIA TO P/N 224-4310-02-10
ECN 1338
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2670 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ± 1/8Two places (.XX) ± 3/32Three places (.XXX) ± 1/16Angles ± 1°Remove all weld spatter after welding.All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
ROUND SILENCER, 4310 FLANGED ENDS
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:JGP
PART NO.SHEET3 224-4310-022 of
SEE PARTS LIST
SHEET SIZECAD FILE LOCATION: P:\Data\CAD - Production\224-4310-02.idw APPROX. WT.
C48 5/8"
36"
1414
9
REVISION HISTORYREV DATE DESCRIPTION APPROVED ZONEA 2/17/11 RELEASED FOR PRODUCTION JGP N/AB 5/11/2011 ADDED DIRECTION OF FLOW SHT 1 ECN 1228 -
C 9/13/2011FLAT PATT -02-4 OD12.00 WAS 12.38
ID 4.63 WAS 4.88-02-3 FLAT PATT ID 4.375 WAS 4.63
ECN 1296 FP
D 11/3/2011 INNER SHELL DIM 36.875 FROM 37.50 ECN 1333
E 11/7/2011ADDED MAT'L TO PARTS LIST & PERF
STOCK HOLE DIA TO P/N 224-4310-02-10
ECN 1338
Ultra Silencer
25 13/16"
29 1/8"
12"
16 3/4"
10 1/2"9 3/8"
6"
25 13/16"
29 1/8"
12"
16 3/4"
10 1/2"9 3/8"
6"
• Custom fit for extremely quiet operation• Stainless steel construction• Top and bottom flanged for many mounting options
Grit Ridder
222-600-2
222-600-2
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:terryr
PART NO.SHEET3 222-600-2-F2 of
1 : 5
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\222-600-2.idw
SHEET SIZE C
CYCLONE 607 4" PLUMBING
1'- 3/4"
3'-6 15/16"
6 5/8"
3 5/8"
1'-2 7/8"
1'-6 5/16"
2" FNPT 4" MNPT
2" MNPT
222-600-2
222-600-2
1
1
2
2
3
3
4
4
A A
B B
C C
D D
NVE NationalVacuum
Equipment, Inc.2707 Aero Park Drive, Traverse City, MI 49686Phone: (231) 941-0215 Fax: (231) 941-2354
TOLERANCES UNLESS OTHER WISE SPECIFIED
One place (.X) ±.1Two places (.XX) ±.01Three places (.XXX) ±.005Angles ±1°All machined surfaces 125 RMS max.Remove all burrs and sharp edges.CAD drawing - NO manual changes.All dimensions in inches unless specified.
This document may contain confidential tradesecret information which is the exclusive
property of National Vacuum Equipment. Anyinformation on this drawing is not to be
disclosed to anyone not having a "Need toKnow." The information contained herein is to
be used only in accordance with the bestinterests of National Vacuum Equipment.
PART NAME:
MATERIAL:
DRAWN BY:
SCALE:
CHECKED BY:
DATE:terryr
PART NO.SHEET3 222-600-2-F2 of
1 : 5
SEE BOM
APPROX. WT.CAD FILE LOCATION: I:\Engineering\CAD - Production\222-600-2.idw
SHEET SIZE C
CYCLONE 607 4" PLUMBING
1'- 3/4"
3'-6 15/16"
6 5/8"
3 5/8"
1'-2 7/8"
1'-6 5/16"
2" FNPT 4" MNPT
2" MNPT
• Cyclonic action removes grit and debris from airflow• Good to 900 CFM • 4” NPT fittings• Flanged center for optimum adjustability
Horizontal Moisture Trap• Mounts to truck frame• Stainless steel body and internals• 4” TTMA flanged fittings• Pressure relief valve• 2” drain valve