series a model 2030 os&y gate valve · 2018. 6. 29. · ul/fm os&y gate valve - model 2030...
TRANSCRIPT
Series AModel 2030
OS&YGate Valve
(2”~24”)
2”~12” 14”~24”
2” ~ 12” OS&Y Gate Valves300 PSIsss
L
1
2
3
4
5
6
7
8
9
1314
15
16
17
18
19
D
10
11
12
NominalSize
Flanged/Grooved H
D L Open Closed
2" 7.09" 7.00" 14-1/2” 12-1/2”
2 1/2" 7.25" 7.50" 16-5/8” 13-3/4”
3" 10.00" 8.00" 18-7/8” 15-3/4”
4" 10.00" 9.00" 21-5/8” 17-3/4”
5" 12.00" 10.00" 25-4/5” 20-7/8”
6" 12.00" 10.50" 29-1/8” 23-1/4
8" 14.00" 11.50" 36-5/8” 28-3/4”
10" 17.50" 13.00" 44-1/2” 34-3/4”
12" 17.50" 14.00" 52” 40-1/6”
Item No. Description Material1 Body ASTM A536 65-45-12
2 Wedge EPDM Encapsulated DI
3 Wedge Nut AISI 304
4 Pin AISI 304
5 Stem Stn. St. AISI 420, 304, 316
6 Bonnet Bolts AISI 304
7 Bonnet ASTM A536 65-45-12
8 Packing Graphite
9 Gland ASTM A536 65-45-12
10 Stem/Yoke Nut C67400/HPb59-1
11 Washer ASTM B16 36000
12 Washer ASTM B16 36000
13 Handwheel ASTM A536 65-45-12
14 Handwheel Nut ASTM A536 65-45-12(Zinc Coated)
15 Gland Nut AISI 304
16 Gland Bolt AISI 304
17 Gasket EPDM
18 O-ring EPDM
19 Plug ASTM B16 36000
H
14” ~ 24” OS&Y Gate Valves
14”&16” - 250 PSI18”~24” - 200 PSI
veees
D
2
5
6
8
10
H
L
1
3
4
7
9 11
12
13
Item No. Description Material/Specifi cation1 Body Ductile Iron ASTM A536 65-45-12
2 Wedge EPDM Encapsulated DI
3 Wedge Nut C67400
4 Stem Stn. Stl. AISI 431, 304, 316
5 Bonnet Ductile Iron ASTM A536 65-45-12
6 Gasket EPDM
7 Gland Ductile Iron ASTM A536 65-45-12
8 Packing Graphite
9 Yoke Ductile Iron ASTM A536 65-45-12
10 Yoke Nut C67400
11 Handwheel Ductile Iron ASTM A536 65-45-12
12 Gland Bolts AISI 304
13 Bonnet Bolts AISI 304
14 Pin Stn. Stl. AISI 304
15 O-ring EPDM
- NPT Plug Brass ASTM B16 C36000
NominalSize
DH
LClosed Open
14" 17.5" 48.19" 61.97" 15"
16" 21" 54.57" 70.31" 16"
18" 24" 61.81" 79.53" 17"
20" 24" 69.92" 89.61" 18"
24" 30" 78.74" 102.36" 20"
14
15
14” ~ 24”
UL/FM OS&Y Gate Valve - Model 2030Product Features
United Water Products2113 West 30th StreetJacksonville, FL 32209
Tel: 877-766-4459Fax: 877-766-4458
www.unitedwaterproducts.comOS&Y1017
· Resilient seat gate valves comply with AWWA C515-09.· Body, bonnet, and wedge made of high strength ductile iron per ASTM A536 65-45-12.· Interior and exterior of the valves are fusion bond epoxy coated per AWWA C550. Epoxy powder is certifi ed to NSF-61.· Each valve is equipped with a hand-wheel that indicates direction of opening.· Packing is constructed of high quality graphite.· Valves are supplied with EPDM o-ring seals for the bonnet and body.· Operating stems are made of either AISI 420, 304 or 316 stainless steel (2”- 12”), AISI 431, 304 or 316 stainless steel (14”~24”). · Wedge nuts are made of AISI 304 stainless steel.· Flanged ends are in accordance with ANSI B16.1, 125 lb. pattern (AWWA C110).· UL/FM rated working pressure: 2”~12”: 300 psi.· UL/FM rated working pressure: 14”~16”: 250 psi.· UL rated working pressure: 18”: 250 psi· UL rated working pressure: 20”~24”: 200 psi.· FM rated working pressure: 18”~24” 200 psi· Ductile iron wedge fully encapsulated with EPDM rubber. · All sizes come with NPT tapped test ports and plugs.· 14”-18” come with “eye bolts” for ease of handling and installation.· Sizes 2”-12” available in Groove x Groove; dimensions per AWWA C606.· Temperature: -23°C (-10°F) to 110°C (230°F)