Electrical Power Solutions

Medical-Grade Power Conditioners and UPS

for imaging and treatment modalities, healthcare I.T.,

MRI suites, and patient vicinity equipment.

Emergency Lighting Invertersfor commercial, industrial, educational, and medical facilities.

UPS and Power Conditioning Voltage Regulators

for I.T., vehicle / cargo scanning, telemetry,

industrial automation, and testing applications.

High EfficiencyK-Rated

Power Conditioning Transformers for commercial and industrial applications including

A / V recording equipment, VFD controls,

and laboratory instrumentation.

Industrial DC Power Supplies (Rectifiers)for electrocoating, anodizing,

and other metal finishing applications.

UL 60601-1 (Medical)UL 924 (Emergency Lighting)

UL / C-UL 1778 (Standard UPS)UL 1012 and 1561 (Power Conditioning Transformers)

1955 Stephenson Hwy., Troy MI 48083www.controlledpwr.comemail: info@controlledpwr.comPhone: (800) 521-4792 Fax: (248) 528-0411

All information and data within this brochure is subject to change without notice.

EPS-008-0617

Represented by:

ULTRA-K Series 600K-he(5 kVA to 25 kVA Single Phase)(15 kVA to 500 kVA Three Phase)

• Meets and exceeds the high efficiency levels defined by the U.S. Department of Energy (DOE) 2016 Standard.

• K-factor ratings of K4, K7, K13, or K20 for full load compatibility with harmonic-rich non-linear loads.

• All copper windings and conductors with double-sized neutral.• Removes load-generated triplen harmonic currents from the input line.• Double- or triple-shielded (146 dB) for high common mode noise attenuation.• Optional output surge protection device (SPD) with high frequency noise filter.*• Standard, floor-mounted: NEMA 2 up to 225kVA; NEMA 1 at 300kVA and

500kVA. Optional NEMA 3R outdoor enclosure available up to 225kVA.• IR scanning window(s) for safe, routine thermal scanning of transformer

connections under load, without exposing personnel to arc flash hazards.

* Contact factory and/or see product brochure for complete SPD details.

Applications: Audio / Video Recording Equipment, IT Systems / Computers, VFD Controls, Automated Scanning Electronics, Isolation for UPS, Laboratory Instrumentation, Electronic Measurement

Series 50 Secondary SCR (100A to 5000A)

High Efficiency K-Rated, Power Conditioning Transformers

Output Range from 6 VDC to 1000 VDC; 40 Amps to 35,000 Amps (Consult factory for model specifics.)

• Standard and custom designs for plating, anodizing, e-coating, motor testing, and special applications.

• Conventional and modular designs; air- or water-cooled models.

• Three phase input available from 208 VAC to 600 VAC, 50 Hz or 60 Hz.

AACD (Automatic Average Current Density)

• Adjusts DC voltage for proper e-coating film thickness.

• DC voltage adjustment based on load current to maximize savings on power and paint consumption.

• Compatible with batch or con- tinuous conveyor processes.

• “Empty tank” power savings.

Industrial DC Power Supplies (Rectifiers)

Warranty: Consult factory for specific product warranties, start-up services, and extended coverages.

Series 700F Power Processor (10 kVA to 150 kVA Three Phase)

• Front access only! All installa- tion, operation, maintenance, and testing can occur from the front of the unit — no side or rear access required.

• Identical voltage regulation and power conditioning perform- ance as the Series 700A.

• Front access to all options including a regulator bypass, output distribution circuit breakers, and input / output digital meters.

• Advanced monitoring options include data-logging, programmable limit alarms, a waveform scope to view the real-time waveform for voltage and current, plus power quality monitoring with event logging.

• Optional communications include Ethernet TCP/IP and MODBUS TCP.

Applications: Commercial, Industrial, Power GenerationPlants, Refineries, Aerospace, Telecommunications, Pulp / Paper Mills, Industrial Lasers

Series 800 Power Purifier 800A Commercial Model (500 VA to 15 kVA)800PI Industrial Model (500 VA to 25 kVA)

• Provides isolated, regulated, and noise-free electrical power to protect sensitive electronic equipment.

• Variable range reg- ulation increases input voltage range under lighter loads, while tight output voltage is maintained.

• Provides power “ride-through”, even with the loss of input voltage for up to 1 cycle.

• 800PI models available in NEMA 1, 2, and 3R enclosures.

Applications: 800A — High-End Digital Photography, Security Systems,Medical Labs800PI — Industrial Networks, Automation Equipment, Machine Tools, PLC’s, Instrumentation

Series 700A Power Processor (5 kVA to 25 kVA Single Phase) (10 kVA to 1 mVA Three Phase)

• 7-tap, microproces- sor-controlled.

• Precisely maintains correct voltage to ± 3% within one cycle, and maintains regulation during extended brownouts.

• Low output imped- ance transformer minimizes voltage distortion and sags commonly associated with high surge currents.

• Triple-shielded transformer provides a noise-free ground, attenuates voltage spikes and transients, and re-establish-es the N-G bond.

• Internal bypass option that “maintains system isolation and voltage transformation.”

Applications: Food Processing, Pharmaceuticals, Commercial, Industrial, Audio / Visual, Wastewater Treatment, Robotics

Series 900/200 Power Commander (“Plus”) (15 kVA to 150 kVA Single Phase) (15 kVA to 450 kVA Three Phase)

• Precise electrical power for critical loads.• Automatic correction of voltage deviations to ± 1%

of nominal.• Adjustable output voltage.• Electronically and magnetically regulated — no moving

parts, virtually no preventive maintenance required.• High fault-clearing capability.• “Plus” models include computer-grade isolation

transformers.

Applications: Test Laboratories, Industrial, Commercial, Distributed Control Systems (DCS), Power Generation Authorities, Regulated Bypass for Uninterruptible Power Systems, Broadcast Communications

Power Conditioning Voltage Regulators

5

800PI models shown

Download product brochure and specifications from any product webpage: • Series 700F • Series 700A• Series 800A • Series 800PI • Series 900/200 • Series 900/200 “Plus”

Download product brochure and specifications from the product webpage: • ULTRA-K

Download product brochure and specifications from either product webpage: • Series 50 • AACD See more of our Industrial DC Power Supplies... visit our Rectifier product-family webpage!

2 © June 2017. Controlled Power Company. Intellistat™, Intellistat TS™, NetMinder™, and Fuzzy Ranging™ are trademarks of Controlled Power Company.

MedPoweRx Model LT/M (700 VA to 2.1 kVA)

• Battery back-up for patient vicinity medical systems.

• Less than 300 micro-amps leakage current to ground.

• Optional specially-designed wheeled cart for portability.

Applications: Mammography, Ultrasound, Fluoroscopy, Dialysis, Hospital Room PC’s, Nurse Call Stations, Fetal Monitor Carts*

* Disclaimer: Product not intended for life support applications. Controlled Power Company does not accept any liability for this product being used with ventilators or any other life support systems.

SureImage Model Ultra-K/M (75 K(i) to 225 K(i) Three Phase)

• Meets and exceeds DOE 2016 minimum efficiency standards.

• SPD with high frequency filter.

• 146 dB common mode noise attenuation.

• K13 rated for harmonic-rich non-linear loads.

Applications: MRI, CT, PET, Molecular Imaging, X-Ray, Cardiology

SuiteLITE Model SCLU (600 W to 3000 W)

• Meets the hospital-grade lighting power requirements of RF-shielded MRI suites.

• Assures a highly-filtered, regulated, dimmable, DC output, and provides illumination without image interference.

• Slide dimmer control with on / off switch, or optional in-suite lighting adjustment.

• Compact size for easy installation, maintenance-free.

Applications: MRI Suite Lighting

SureImage Model 700F/M (60 K(i) to 260 K(i) Three Phase)

• Output line voltage regulation ± 2%, typical.

• Up to 97% efficiency.• Front access enclosure.• Optional input and output

metering with real-time monitoring and waveform viewing.

• Optional output circuit breakers.

Applications: MRI, CT, PET, Molecular Imaging, X-Ray, Cardiology, Linear Accelerator

Medical-Grade Power Conditioners and UPS

Controlled Power Company engineers and produces the industry’s highest quality electrical power solutions, capitalizing on over 40 years of design and manufacturing expertise. We have an enviable reputation for quality, which is reflected in the design, workman-ship, and performance of our products.

From Research and Development... through Engineering, Marketing, and Sales... through Manufacturing and Shipping... through Accounting and Customer Support, Controlled Power Company is never content with the status quo in either our products or our attention to our customers. We continue to be a leader in the broad range of markets we serve, by proactively anticipating power quality trends and requirements, and listening attentively to our prospects’ and customers’ needs.

Features And Benefits Common to Both the SureImage Models Ultra-K/M and the 700F/M• “K(i) Rated” to meet the momentary power demand of medical imaging and treatment equipment. • Significantly reduces / eliminates “artifacts” in the digital image, which enhances workflow, increases patient throughput, and contributes

to lower operating costs.• Triple shielded isolation transformer provides excellent common and normal mode noise attenuation.• Low output impedance delivers < 2% load regulation from typical steady state load to intermittent power demand.

Download product brochure and specifications from any product webpage: • Model LT/M • Model SCLU • Model Ultra-K/M • Model 700F/M

3

EON Model EL3 (10 kW to 55 kW Three Phase)

• Computer-based, self-testing / self-diagnostic emergency lighting system with data-logging and reporting (NFPA 101, 7.9.3.1.3).

• Physically smaller than comparable three-phase emergency lighting inverter products, without compromising performance or serviceability.

• 90 minutes runtime requires only (1) battery cabinet up to 33 kW, and only (2) battery cabinets for 40 kW – 55 kW.

• Only batteries with front-access terminals are used.

Applications: Theaters / Concert Halls, Auditoriums, Airports, Casinos, Conference / Banquet Centers, Industrial Manufacturing, Warehouses

Advanced Digital Monitoring The Intellistat TSTM

• Color, TFT, high resolution touch- screen display for viewing system parameters, status, alarms, and programming of date / time values and system setpoints.

• Provides complete system diag- nostics and testing, including all NFPA-compliant automatic battery testing and report logging.

• Performs egress lighting integrity test.

Available On:UltraLITE Model ELU: 1.5 kW – 14 kW sizes

Standard On:EON Model EL3: 10 kW – 55 kW three phase sizes

NetMinderTM CommunicationsRemote (BACnet, SNMP, TCP/IP, E-Mail, MODBUS) communication of test results and system status.

SwitchLITE Model EZTProvides automatic transfer between normal and emergencypower for up to eight (8) individual single phase, 20 amp circuits.

UltraLITE Model ELC (600 W to 2 kW Single Phase)

• Compact, front access design, featuring one of the smallest cabinet footprints in the industry.

• Uninterrupted, regulated, continuous sinewave output, compatible with all existing and future lighting loads.

• Timed Normally Off Bus “PLUS” option includes an adjustable soft start to accommodate the high inrush current of “normally off” emergency lights.

• High-speed automatic static bypass.• Manual bypass switch.• NEMA 2 drip-proof enclosure.

Applications: Commercial, Industrial, Schools, Hospitals, Office Buildings, Retail Stores, Multi-Unit Dwellings

UltraLITE Model ELU (1.5 kW to 14 kW Single Phase)

• Seamless transfer, online double-conversion system, compatible with all existing and future lighting loads.

• Automatic static bypass.• Secure, internal make-before-break

inverter bypass switch.• Basic and advanced Intellistat TS™

monitoring options.• System approved for 42k AIC

rated source.

eLITE Models ELN (550 W to 1.5 kW Single Phase)ELE (5.3 kW to 18 kW Single Phase)

True uninterruptible power, designed for HID, incandescent, halogen, and quartz lighting applications, plus PFC electronic ballast loading up to 50% of the inverter’s rated output.

Applications: Commercial, Industrial, Schools, Hospitals, Arenas, Mass Transit, Airports, Restaurants, Worship Facilities

Centralized Emergency Lighting Inverters

Features And Benefits Common to All Controlled Power Company Emergency Lighting Inverters• Uninterrupted, regulated power for “normally on” lighting fixtures / exit lamps, and for “normally off” emergency lights.• Meets NFPA 101 and 111 standards. NFPA compliant as “Life Safety Equipment”.• Front access design with small footprint — front access distribution behind a lockable panel door.• UL 924 Listed as “Emergency Lighting Equipment” with standard 90 minutes; optional battery run times available.

Download product brochure and specifications from any product webpage: • Model EL3 • Model ELC • Model ELU • Model ELN • Model ELE • Model EZT

4

LT Series (700 VA to 2.1 kVA)

• Tower (Model LT) or rack-mount (Model LTR) styles available.

• Line cord / receptacle or hardwired models.

• Model LTN (NEMA 2) UPS with extended battery runtimes; front access style enclosure.

• Model LTN-3R outdoor UPS with extended runtimes; NEMA 3R raintight enclosure design.

• Elastomeric insulation prevents condensation and internal moisture.

• Conformal coated circuit boards.• Runtimes from 30 minutes to

9.5 hours at full load, model dependent.

Applications: LT, LTR, LTN — Industrial / Automated Process Controls, Point-of-Sale Computers, InstrumentationLTN-3R — Traffic Controls, Vehicle / Cargo Scanning, Solar Array Controls

MD Series (3.1 kVA to 7.5 kVA)

• Internal bypass option that “maintains system isolation and voltage transformation”.

• Multiple input / output voltage configurations.

• Custom-configured output distribution and receptacles.

Applications: LAN / WAN, Telecommunications, Industrial Controls

Model ES (4500 VA to 15500 VA)

• Online, double-conversion technology.

• Extended battery backup time, without the need for additional cabinetry.

• Choice of nominal input voltages, with conversion to the exact nominal output voltage needed, even in bypass.

• Color monitor with high-resolution touch-screen display.• Full network communications options.

Model ESV(1.5 kVA to 14 kVA)

• Online double-conversion technology.

• Up to 4 hours of runtime in a front access cabinet design, with zero side or rear clearance requirements.

• Color monitor with high-resolution touch-screen display.

Applications: ES, ESV — I.T. Server Rooms, Industrial Controls,

and Telemetry

HV Series (7.5 kVA to 25 kVA)

• Integral constant voltage transformer isolates and regulates output voltage.

• Internal bypass option that “maintains system isolation and voltage transformation”.

• Optional “System Power Analyzer” local monitor.

Applications: Windfarm Power Substations, SCADA / DCS, Extensive LAN / WAN Systems, Industrial Controls

Uninterruptible Power Supplies (UPS)

Features And Benefits Common to All Controlled Power Company LT, MD, and HV Series UPS’s• Steady, regulated output voltage to ± 3% of nominal, extends the life of protected equipment.• Built-in isolation eliminates electrical noise, and provides a “newly derived power source”.• Field-expandable power ratings, and optional extended battery runtimes.• Batteries are pre-assembled, installed, tested, and shipped within the UPS enclosure. (Excluding Model LTN-3R)• No-break, continuous power provides seamless transfer to back-up power, and prevents data loss.• Accelerated battery charger options.• Optional “NetMinder”™ UPS Management Suite software and hardware for UPS monitoring and unattended

computer / network shutdown.

Download product brochure and specifications from any product webpage: • Model LT • Model LTR • Model LTN • Model LTN-3R • MD Series • HV Series • Model ES • Model ESV

Model ELU display shown

Model LTN-3R shown

Note: “Variable Range Regulation” (using Fuzzy Ranging™ technology) broadens the input operating range of the UPS as a function of load, down to -40% of the input voltage; standard on the LT and MD Series products.

— High Peak Overload Capability to accommodate inrush from LED fixtures / drivers!

2 © April 2017. Controlled Power Company. Intellistat™, Intellistat TS™, NetMinder™, and Fuzzy Ranging™ are trademarks of Controlled Power Company.

MedPoweRx Model LT/M (700 VA to 2.1 kVA)

• Battery back-up for patient vicinity medical systems.

• Less than 300 micro-amps leakage current to ground.

• Optional specially-designed wheeled cart for portability.

Applications: Mammography, Ultrasound, Fluoroscopy, Dialysis, Hospital Room PC’s, Nurse Call Stations, Fetal Monitor Carts*

* Disclaimer: Product not intended for life support applications. Controlled Power Company does not accept any liability for this product being used with ventilators or any other life support systems.

SureImage Model Ultra-K/M (75 K(i) to 225 K(i) Three Phase)

• 98% efficiency, typical.• High frequency filter.• Low temperature rise

(105˚F).• 146 dB common mode

noise attenuation.

Applications: MRI, CT, PET, Molecular Imaging, X-Ray, Cardiology

SuiteLITE Model SCLU (600 W to 3000 W)

• Meets the hospital-grade lighting power requirements of RF-shielded MRI suites.

• Assures a highly-filtered, regulated, dimmable, DC output, and provides illumination without image interference.

• Slide dimmer control with on / off switch, or optional in-suite lighting adjustment.

• Compact size for easy installation, maintenance-free.

Applications: MRI Suite Lighting

SureImage Model 700F/M (60 K(i) to 260 K(i) Three Phase)

• Output line voltage regulation ± 2%, typical.

• Up to 97% efficiency.• Front access enclosure.• Optional input and output

metering with real-time monitoring and waveform viewing.

• Optional output circuit breakers.

Applications: MRI, CT, PET, Molecular Imaging, X-Ray, Cardiology, Linear Accelerator

Medical-Grade Power Conditioners and UPS

Controlled Power Company engineers and produces the industry’s highest quality electrical power solutions, capitalizing on over 40 years of design and manufacturing expertise. We have an enviable reputation for quality, which is reflected in the design, workman-ship, and performance of our products.

From Research and Development... through Engineering, Marketing, and Sales... through Manufacturing and Shipping... through Accounting and Customer Support, Controlled Power Company is never content with the status quo in either our products or our attention to our customers. We continue to be a leader in the broad range of markets we serve, by proactively anticipating power quality trends and requirements, and listening attentively to our prospects’ and customers’ needs.

Features And Benefits Common to Both the SureImage Models Ultra-K/M and the 700F/M• “K(i) Rated” to meet the momentary power demand of medical imaging and treatment equipment. • Significantly reduces / eliminates “artifacts” in the digital image, which enhances workflow, increases patient throughput, and contributes

to lower operating costs.• Triple shielded isolation transformer provides excellent common and normal mode noise attenuation.• Low output impedance delivers < 2% load regulation from typical steady state load to intermittent power demand.

Download product brochure and specifications from any product webpage: • Model LT/M • Model SCLU • Model Ultra-K/M • Model 700F/M

3

EON Model EL3 (10 kW to 55 kW Three Phase)

• Computer-based, self-testing / self-diagnostic emergency lighting system with data-logging and reporting (NFPA 101, 7.9.3.1.3).

• Physically smaller than comparable three-phase emergency lighting inverter products, without compromising performance or serviceability.

• 90 minutes runtime requires only (1) battery cabinet up to 33 kW, and only (2) battery cabinets for 40 kW – 55 kW.

• Only batteries with front-access terminals are used.

Applications: Theaters / Concert Halls, Auditoriums, Airports, Casinos, Conference / Banquet Centers, Industrial Manufacturing, Warehouses

Advanced Digital Monitoring The Intellistat TSTM

• Color, TFT, high resolution touch- screen display for viewing system parameters, status, alarms, and programming of date / time values and system setpoints.

• Provides complete system diag- nostics and testing, including all NFPA-compliant automatic battery testing and report logging.

• Performs egress lighting integrity test.

Available On:UltraLITE Model ELU: 1.5 kW – 14 kW sizes

Standard On:EON Model EL3: 10 kW – 55 kW three phase sizes

NetMinderTM CommunicationsRemote (BACnet, SNMP, TCP/IP, E-Mail, MODBUS) communication of test results and system status.

SwitchLITE Model EZTProvides automatic transfer between normal and emergencypower for up to eight (8) individual single phase, 20 amp circuits.

UltraLITE Model ELC (600 W to 2 kW Single Phase)

• Compact, front access design, featuring one of the smallest cabinet footprints in the industry.

• Uninterrupted, regulated, continuous sinewave output, compatible with all existing and future lighting loads.

• Timed Normally Off Bus “PLUS” option includes an adjustable soft start to accommodate the high inrush current of “normally off” emergency lights.

• High-speed automatic static bypass.• Manual bypass switch.• NEMA 2 drip-proof enclosure.

Applications: Commercial, Industrial, Schools, Hospitals, Office Buildings, Retail Stores, Multi-Unit Dwellings

UltraLITE Model ELU (1.5 kW to 14 kW Single Phase)

• Seamless transfer, online double-conversion system, compatible with all existing and future lighting loads.

• Automatic static bypass.• Secure, internal make-before-break

inverter bypass switch.• Basic and advanced Intellistat TS™

monitoring options.• System approved for 42k AIC

rated source.

eLITE Models ELN (550 W to 1.5 kW Single Phase)ELE (5.3 kW to 18 kW Single Phase)

True uninterruptible power, designed for HID, incandescent, halogen, and quartz lighting applications, plus PFC electronic ballast loading up to 50% of the inverter’s rated output.

Applications: Commercial, Industrial, Schools, Hospitals, Arenas, Mass Transit, Airports, Restaurants, Worship Facilities

Centralized Emergency Lighting Inverters

Features And Benefits Common to All Controlled Power Company Emergency Lighting Inverters• Uninterrupted, regulated power for “normally on” lighting fixtures / exit lamps, and for “normally off” emergency lights.• Meets NFPA 101 and 111 standards. NFPA compliant as “Life Safety Equipment”.• Front access design with small footprint — front access distribution behind a lockable panel door.• UL 924 Listed as “Emergency Lighting Equipment” with standard 90 minutes; optional battery run times available.

Download product brochure and specifications from any product webpage: • Model EL3 • Model ELC • Model ELU • Model ELN • Model ELE • Model EZT

4

LT Series (700 VA to 2.1 kVA)

• Tower (Model LT) or rack-mount (Model LTR) styles available.

• Line cord / receptacle or hardwired models.

• Model LTN (NEMA 2) UPS with extended battery runtimes; front access style enclosure.

• Model LTN-3R outdoor UPS with extended runtimes; NEMA 3R raintight enclosure design.

• Elastomeric insulation prevents condensation and internal moisture.

• Conformal coated circuit boards.• Runtimes from 30 minutes to

9.5 hours at full load, model dependent.

Applications: LT, LTR, LTN — Industrial / Automated Process Controls, Point-of-Sale Computers, InstrumentationLTN-3R — Traffic Controls, Vehicle / Cargo Scanning, Solar Array Controls

MD Series (3.1 kVA to 7.5 kVA)

• Internal bypass option that “maintains system isolation and voltage transformation”.

• Multiple input / output voltage configurations.

• Custom-configured output distribution and receptacles.

Applications: LAN / WAN, Telecommunications, Industrial Controls

Model ES (4500 VA to 15500 VA)

• Online, double-conversion technology.

• Extended battery backup time, without the need for additional cabinetry.

• Choice of nominal input voltages, with conversion to the exact nominal output voltage needed, even in bypass.

• Color monitor with high-resolution touch-screen display.• Full network communications options.

Model ESV(1.5 kVA to 14 kVA)

• Online double-conversion technology.

• Up to 4 hours of runtime in a front access cabinet design, with zero side or rear clearance requirements.

• Color monitor with high-resolution touch-screen display.

Applications: ES, ESV — I.T. Server Rooms, Industrial Controls,

and Telemetry

HV Series (7.5 kVA to 25 kVA)

• Integral constant voltage transformer isolates and regulates output voltage.

• Internal bypass option that “maintains system isolation and voltage transformation”.

• Optional “System Power Analyzer” local monitor.

Applications: Windfarm Power Substations, SCADA / DCS, Extensive LAN / WAN Systems, Industrial Controls

Uninterruptible Power Supplies (UPS)

Features And Benefits Common to All Controlled Power Company LT, MD, and HV Series UPS’s• Steady, regulated output voltage to ± 3% of nominal, extends the life of protected equipment.• Built-in isolation eliminates electrical noise, and provides a “newly derived power source”.• Field-expandable power ratings, and optional extended battery runtimes.• Batteries are pre-assembled, installed, tested, and shipped within the UPS enclosure. (Excluding Model LTN-3R)• No-break, continuous power provides seamless transfer to back-up power, and prevents data loss.• Accelerated battery charger options.• Optional “NetMinder”™ UPS Management Suite software and hardware for UPS monitoring and unattended

computer / network shutdown.

Download product brochure and specifications from any product webpage: • Model LT • Model LTR • Model LTN • Model LTN-3R • MD Series • HV Series • Model ES • Model ESV

Model ELU display shown

Model LTN-3R shown

Note: “Variable Range Regulation” (using Fuzzy Ranging™ technology) broadens the input operating range of the UPS as a function of load, down to -40% of the input voltage; standard on the LT and MD Series products.

— High Peak Overload Capability to accommodate inrush from LED fixtures / drivers!

2 © April 2016. Controlled Power Company. Intellistat™, Intellistat TS™, NetMinder™, and Fuzzy Ranging™ are trademarks of Controlled Power Company.

MedPoweRx Model LT/M (700 VA to 2.1 kVA)

• Battery back-up for patient vicinity medical systems.

• Less than 300 micro-amps leakage current to ground.

• Optional specially-designed wheeled cart for portability.

Applications: Mammography, Ultrasound, Fluoroscopy, Dialysis, Hospital Room PC’s, Nurse Call Stations, Fetal Monitor Carts*

* Disclaimer: Product not intended for life support applications. Controlled Power Company does not accept any liability for this product being used with ventilators or any other life support systems.

SureImage Model Ultra-K/M (75 K(i) to 225 K(i) Three Phase)

• 98% efficiency, typical.• High frequency filter.• Low temperature rise

(105˚F).• 146 dB common mode

noise attenuation.

Applications: MRI, CT, PET, Molecular Imaging, X-Ray, Cardiology

SuiteLITE Model SCLU (600 W to 3000 W)

• Meets the hospital-grade lighting power requirements of RF-shielded MRI suites.

• Assures a highly-filtered, regulated, dimmable, DC output, and provides illumination without image interference.

• Slide dimmer control with on / off switch, or optional in-suite lighting adjustment.

• Compact size for easy installation, maintenance-free.

Applications: MRI Suite Lighting

SureImage Model 700F/M (60 K(i) to 260 K(i) Three Phase)

• Output line voltage regulation ± 2%, typical.

• Up to 97% efficiency.• Front access enclosure.• Optional input and output

metering with real-time monitoring and waveform viewing.

• Optional output circuit breakers.

Applications: MRI, CT, PET, Molecular Imaging, X-Ray, Cardiology, Linear Accelerator

Medical-Grade Power Conditioners and UPS

Controlled Power Company engineers and produces the industry’s highest quality electrical power solutions, capitalizing on over 40 years of design and manufacturing expertise. We have an enviable reputation for quality, which is reflected in the design, workman-ship, and performance of our products.

From Research and Development... through Engineering, Marketing, and Sales... through Manufacturing and Shipping... through Accounting and Customer Support, Controlled Power Company is never content with the status quo in either our products or our attention to our customers. We continue to be a leader in the broad range of markets we serve, by proactively anticipating power quality trends and requirements, and listening attentively to our prospects’ and customers’ needs.

Features And Benefits Common to Both the SureImage Models Ultra-K/M and the 700F/M• “K(i) Rated” to meet the momentary power demand of medical imaging and treatment equipment. • Significantly reduces / eliminates “artifacts” in the digital image, which enhances workflow, increases patient throughput, and contributes

to lower operating costs.• Triple shielded isolation transformer provides excellent common and normal mode noise attenuation.• Low output impedance delivers < 2% load regulation from typical steady state load to intermittent power demand.

Download product brochure and specifications from any product webpage: • Model LT/M • Model SCLU • Model Ultra-K/M • Model 700F/M

3

EON Model EL3 (10 kW to 33 kW Three Phase)

• Computer-based, self-testing / self-diagnostic emergency lighting system with data-logging and reporting (NFPA 101, 7.9.3.1.3).

• Physically smaller than comparable three-phase emergency lighting inverter products, without compromising performance or serviceability.

• Requires only (1) battery cabinet for 90 minutes runtime.• Only batteries with front-access terminals are used.

Applications: Theaters / Concert Halls, Auditoriums, Airports, Casinos, Conference / Banquet Centers, Industrial Manufacturing, Warehouses

Advanced Digital Monitoring The Intellistat TSTM

• Color, TFT, high resolution touch- screen display for viewing system parameters, status, alarms, and programming of date / time values and system setpoints.

• Provides complete system diag- nostics and testing, including all NFPA-compliant automatic battery testing and report logging.

• Performs egress lighting integrity test.

Available On:UltraLITE Model ELU: 1.5 kW – 14 kW sizes

Standard On:EON Model EL3: 10 kW – 33 kW three phase sizes

NetMinderTM CommunicationsRemote (BACnet, SNMP, TCP/IP, E-Mail, MODBUS) communication of test results and system status.

SwitchLITE Model EZTProvides automatic transfer between normal and emergencypower for up to eight (8) individual single phase, 20 amp circuits.

UltraLITE Model ELC (600 W to 2 kW Single Phase)

• Compact, front access design, featuring one of the smallest cabinet footprints in the industry.

• Uninterrupted, regulated, continuous sinewave output, compatible with all existing and future lighting loads.

• Timed Normally Off Bus “PLUS” option includes an adjustable soft start to accommodate the high inrush current of “normally off” emergency lights.

• High-speed automatic static bypass.• Manual bypass switch.• NEMA 2 drip-proof enclosure.

Applications: Commercial, Industrial, Schools, Hospitals, Office Buildings, Retail Stores, Multi-Unit Dwellings

UltraLITE Model ELU (1.5 kW to 14 kW Single Phase)

• Seamless transfer, online double-conversion system, compatible with all existing and future lighting loads.

• Automatic static bypass.• Secure, internal make-before-break

inverter bypass switch.• Basic and advanced Intellistat TS™

monitoring options.• System approved for 42k AIC

rated source.

eLITE Models ELN (550 W to 1.5 kW Single Phase)ELE (5.3 kW to 18 kW Single Phase)

True uninterruptible power, designed for HID, incandescent, halogen, and quartz lighting applications, plus PFC electronic ballast loading up to 50% of the inverter’s rated output.

Applications: Commercial, Industrial, Schools, Hospitals, Arenas, Mass Transit, Airports, Restaurants, Worship Facilities

Centralized Emergency Lighting Inverters

Features And Benefits Common to All Controlled Power Company Emergency Lighting Inverters• Uninterrupted, regulated power for “normally on” lighting fixtures / exit lamps, and for “normally off” emergency lights.• Meets NFPA 101 and 111 standards. NFPA compliant as “Life Safety Equipment”.• Front access design with small footprint — front access distribution behind a lockable panel door.• UL 924 Listed as “Emergency Lighting Equipment” with standard 90 minutes; optional battery run times available.• Generator-compatible and available with 10 – 15 minutes back-up; UL 924 Listed as “Auxiliary Lighting and Power Equipment”.

Download product brochure and specifications from any product webpage: • Model EL3 • Model ELC • Model ELU • Model ELN • Model ELE • Model EZT

4

LT Series (700 VA to 2.1 kVA)

• Tower (Model LT) or rack-mount (Model LTR) styles available.

• Line cord / receptacle or hardwired models.

• Model LTN (NEMA 2) UPS with extended battery runtimes; front access style enclosure.

• Model LTN-3R outdoor UPS with extended runtimes; NEMA 3R raintight enclosure design.

• Elastomeric insulation prevents condensation and internal moisture.

• Conformal coated circuit boards.• Runtimes from 30 minutes to

9.5 hours at full load, model dependent.

Applications: LT, LTR, LTN — Industrial / Automated Process Controls, Point-of-Sale Computers, InstrumentationLTN-3R — Traffic Controls, Vehicle / Cargo Scanning, Solar Array Controls

MD Series (3.1 kVA to 7.5 kVA)

• Internal bypass option that “maintains system isolation and voltage transformation”.

• Multiple input / output voltage configurations.

• Custom-configured output distribution and receptacles.

Applications: LAN / WAN, Telecommunications, Industrial Controls

Model ES (4500 VA to 15500 VA)

• Online, double-conversion technology.

• Extended battery backup time, without the need for additional cabinetry.

• Choice of nominal input voltages, with conversion to the exact nominal output voltage needed, even in bypass.

• Color monitor with high-resolution touch-screen display.• Full network communications options.

Model ESV(1.5 kVA to 14 kVA)

• Online double-conversion technology.

• Up to 4 hours of runtime in a front access cabinet design, with zero side or rear clearance requirements.

• Color monitor with high-resolution touch-screen display.

Applications: ES, ESV — I.T. Server Rooms, Industrial Controls,

and Telemetry

HV Series (7.5 kVA to 25 kVA)

• Integral constant voltage transformer isolates and regulates output voltage.

• Internal bypass option that “maintains system isolation and voltage transformation”.

• Optional “System Power Analyzer” local monitor.

Applications: Windfarm Power Substations, SCADA / DCS, Extensive LAN / WAN Systems, Industrial Controls

Uninterruptible Power Supplies (UPS)

Features And Benefits Common to All Controlled Power Company LT, MD, and HV Series UPS’s• Steady, regulated output voltage to ± 3% of nominal, extends the life of protected equipment.• Built-in isolation eliminates electrical noise, and provides a “newly derived power source”.• Field-expandable power ratings, and optional extended battery runtimes.• Batteries are pre-assembled, installed, tested, and shipped within the UPS enclosure. (Excluding Model LTN-3R)• No-break, continuous power provides seamless transfer to back-up power, and prevents data loss.• Accelerated battery charger options.• Optional “NetMinder”™ UPS Management Suite software and hardware for UPS monitoring and unattended

computer / network shutdown.

Download product brochure and specifications from any product webpage: • Model LT • Model LTR • Model LTN • Model LTN-3R • MD Series • HV Series • Model ES • Model ESV

Model ELU display shown

Model LTN-3R shown

Note: “Variable Range Regulation” (using Fuzzy Ranging™ technology) broadens the input operating range of the UPS as a function of load, down to -40% of the input voltage; standard on the LT and MD Series products.

Electrical Power Solutions

Medical-Grade Power Conditioners and UPS

for imaging and treatment modalities,

healthcare I.T., MRI suites, and

patient vicinity equipment.

Emergency Lighting Invertersfor commercial, industrial, educational,

and medical facilities.

UPS, Power Conditioning Voltage Regulators, and Power Distribution

for I.T., telecom, industrial automation,

and testing applications.

Industrial DC Power Supplies (Rectifiers)

for electrocoating, anodizing,

and other metal finishing applications.

UL 60601-1 (Medical)UL 924 / C-UL (Emergency Lighting)

UL / C-UL 1778 (Standard UPS)UL 1012 and 1561 (Power Conditioning Transformers)

1955 Stephenson Hwy., Troy MI 48083www.controlledpwr.comemail: info@controlledpwr.comPhone: (800) 521-4792 Fax: (248) 528-0411

All information and data within this brochure is subject to change without notice.

EPS-006-0416

Represented by:

Ultra-K Isolation Transformer (5 kVA to 25 kVA Single Phase) (15 kVA to 500 kVA Three Phase)

• Meets NEMA TP 1-2002 dry type distribution transformer efficiency standards.

• Achieves NEMA TP 1-2002 Table 4-2 efficiencies under a K13 non-linear load at or between 35% - 50% of its rating on models 30 kVA and higher. *

• All copper windings and conductors with double-sized neutral.• Removes triplen harmonic currents from the line.• Double- or triple-shielded (146 dB) for high common mode

noise attenuation.• Optional Cat. B3 TVSS with output high frequency noise filter.

* Harmonic transformers are excluded from the NEMA TP 1-2002 Standard.

Applications: Switch Mode Power Supplies, Variable Speed Drives, Sensitive Digital Equipment in Theaters and Recording Studios

Series 50 Secondary SCR (100A to 5000A)

Power Conditioning Transformers & Power Distribution Units

Output Range from 6 VDC to 1000 VDC; 40 Amps to 35,000 Amps (Consult factory for model specifics.)

• Standard and custom designs for plating, anodizing, e-coating, motor testing, and special applications.

• Conventional and modular designs; air- or water-cooled models.

• Three phase input available from 208 VAC to 600 VAC, 50 Hz or 60 Hz.

AACD (Automatic Average Current Density)

• Adjusts DC voltage for proper e-coating film thickness.

• DC voltage adjustment based on load current to maximize savings on power and paint consumption.

• Compatible with batch or con- tinuous conveyor processes.

• “Empty tank” power savings.

Industrial DC Power Supplies (Rectifiers)

Warranty: Consult factory for specific product warranties, start-up services, and extended coverages.

Series 700F Power Processor (10 kVA to 150 kVA Three Phase)

• Front access only! All installa- tion, operation, maintenance, and testing can occur from the front of the unit — no side or rear access required.

• Identical voltage regulation and power conditioning perform- ance as the Series 700A.

• Front access to all options including a regulator bypass, output distribution circuit breakers, and input / output digital meters.

• Advanced monitoring options include data-logging, programmable limit alarms, a waveform scope to view the real-time waveform for voltage and current, plus power quality monitoring with event logging.

• Optional communications include Ethernet TCP/IP and MODBUS TCP.

Applications: Commercial, Industrial, Power GenerationPlants, Refineries, Aerospace, Telecommunications, Pulp / Paper Mills, Industrial Lasers

Series 800 Power Purifier 800A Commercial Model (500 VA to 15 kVA)800PI Industrial Model (500 VA to 25 kVA)

• Provides isolated, regulated, and noise-free electrical power to protect sensitive electronic equipment.

• Variable range reg- ulation increases input voltage range under lighter loads, while tight output voltage is maintained.

• Provides power “ride-through”, even with the loss of input voltage for up to 1 cycle.

• 800PI models available in NEMA 1, 2, and 3R enclosures.

Applications: 800A — High-End Digital Photography, Security Systems,Medical Labs800PI — Industrial Networks, Automation Equipment, Machine Tools, PLC’s, Instrumentation

Series 700A Power Processor (5 kVA to 25 kVA Single Phase) (10 kVA to 1 mVA Three Phase)

• 7-tap, microproces- sor-controlled.

• Precisely maintains correct voltage to ± 3% within one cycle, and maintains regulation during extended brownouts.

• Low output imped- ance transformer minimizes voltage distortion and sags commonly associated with high surge currents.

• Triple-shielded transformer provides a noise-free ground, attenuates voltage spikes and transients, and re-establish-es the N-G bond.

• Internal bypass option that “maintains system isolation and voltage transformation.”

Applications: Food Processing, Pharmaceuticals, Commercial, Industrial, Audio / Visual, Wastewater Treatment, Robotics

Series 900/200 Power Commander (“Plus”) (15 kVA to 150 kVA Single Phase) (15 kVA to 450 kVA Three Phase)

• Precise electrical power for critical loads.• Automatic correction of voltage deviations to ± 1%

of nominal.• Adjustable output voltage.• Electronically and magnetically regulated — no moving

parts, virtually no preventive maintenance required.• High fault-clearing capability.• “Plus” models include computer-grade isolation

transformers.

Applications: Test Laboratories, Industrial, Commercial, Distributed Control Systems (DCS), Power Generation Authorities, Regulated Bypass for Uninterruptible Power Systems, Broadcast Communications

Power Conditioning Voltage Regulators

5

800PI models shown

Download product brochure and specifications from any product webpage: • Series 700F • Series 700A• Series 800A • Series 800PI • Series 900/200 • Series 900/200 “Plus”

Download product brochure and specifications from the product webpage: • Ultra-K

Download product brochure and specifications from any product webpage: • Series 50 • AACD See more of our Industrial DC Power Supplies... visit our Rectifier product-family webpage!

Electrical Power Solutions

Medical-Grade Power Conditioners and UPS

for imaging and treatment modalities, healthcare I.T.,

MRI suites, and patient vicinity equipment.

Emergency Lighting Invertersfor commercial, industrial, educational, and medical facilities.

UPS and Power Conditioning Voltage Regulators

for I.T., vehicle / cargo scanning, telemetry,

industrial automation, and testing applications.

High EfficiencyK-Rated

Power Conditioning Transformers for commercial and industrial applications including

A / V recording equipment, VFD controls,

and laboratory instrumentation.

Industrial DC Power Supplies (Rectifiers)for electrocoating, anodizing,

and other metal finishing applications.

UL 60601-1 (Medical)UL 924 (Emergency Lighting)

UL / C-UL 1778 (Standard UPS)UL 1012 and 1561 (Power Conditioning Transformers)

1955 Stephenson Hwy., Troy MI 48083www.controlledpwr.comemail: info@controlledpwr.comPhone: (800) 521-4792 Fax: (248) 528-0411

All information and data within this brochure is subject to change without notice.

EPS-008-0617

Represented by:

ULTRA-K Series 600K-he(5 kVA to 25 kVA Single Phase)(15 kVA to 500 kVA Three Phase)

• Meets and exceeds the high efficiency levels defined by the U.S. Department of Energy (DOE) 2016 Standard.

• K-factor ratings of K4, K7, K13, or K20 for full load compatibility with harmonic-rich non-linear loads.

• All copper windings and conductors with double-sized neutral.• Removes load-generated triplen harmonic currents from the input line.• Double- or triple-shielded (146 dB) for high common mode noise attenuation.• Optional output surge protection device (SPD) with high frequency noise filter.*• Standard, floor-mounted: NEMA 2 up to 225kVA; NEMA 1 at 300kVA and

500kVA. Optional NEMA 3R outdoor enclosure available up to 225kVA.• IR scanning window(s) for safe, routine thermal scanning of transformer

connections under load, without exposing personnel to arc flash hazards.

* Contact factory and/or see product brochure for complete SPD details.

Applications: Audio / Video Recording Equipment, IT Systems / Computers, VFD Controls, Automated Scanning Electronics, Isolation for UPS, Laboratory Instrumentation, Electronic Measurement

Series 50 Secondary SCR (100A to 5000A)

High Efficiency K-Rated, Power Conditioning Transformers

Output Range from 6 VDC to 1000 VDC; 40 Amps to 35,000 Amps (Consult factory for model specifics.)

• Standard and custom designs for plating, anodizing, e-coating, motor testing, and special applications.

• Conventional and modular designs; air- or water-cooled models.

• Three phase input available from 208 VAC to 600 VAC, 50 Hz or 60 Hz.

AACD (Automatic Average Current Density)

• Adjusts DC voltage for proper e-coating film thickness.

• DC voltage adjustment based on load current to maximize savings on power and paint consumption.

• Compatible with batch or con- tinuous conveyor processes.

• “Empty tank” power savings.

Industrial DC Power Supplies (Rectifiers)

Warranty: Consult factory for specific product warranties, start-up services, and extended coverages.

Series 700F Power Processor (10 kVA to 150 kVA Three Phase)

• Front access only! All installa- tion, operation, maintenance, and testing can occur from the front of the unit — no side or rear access required.

• Identical voltage regulation and power conditioning perform- ance as the Series 700A.

• Front access to all options including a regulator bypass, output distribution circuit breakers, and input / output digital meters.

• Advanced monitoring options include data-logging, programmable limit alarms, a waveform scope to view the real-time waveform for voltage and current, plus power quality monitoring with event logging.

• Optional communications include Ethernet TCP/IP and MODBUS TCP.

Applications: Commercial, Industrial, Power GenerationPlants, Refineries, Aerospace, Telecommunications, Pulp / Paper Mills, Industrial Lasers

Series 800 Power Purifier 800A Commercial Model (500 VA to 15 kVA)800PI Industrial Model (500 VA to 25 kVA)

• Provides isolated, regulated, and noise-free electrical power to protect sensitive electronic equipment.

• Variable range reg- ulation increases input voltage range under lighter loads, while tight output voltage is maintained.

• Provides power “ride-through”, even with the loss of input voltage for up to 1 cycle.

• 800PI models available in NEMA 1, 2, and 3R enclosures.

Applications: 800A — High-End Digital Photography, Security Systems,Medical Labs800PI — Industrial Networks, Automation Equipment, Machine Tools, PLC’s, Instrumentation

Series 700A Power Processor (5 kVA to 25 kVA Single Phase) (10 kVA to 1 mVA Three Phase)

• 7-tap, microproces- sor-controlled.

• Precisely maintains correct voltage to ± 3% within one cycle, and maintains regulation during extended brownouts.

• Low output imped- ance transformer minimizes voltage distortion and sags commonly associated with high surge currents.

• Triple-shielded transformer provides a noise-free ground, attenuates voltage spikes and transients, and re-establish-es the N-G bond.

• Internal bypass option that “maintains system isolation and voltage transformation.”

Applications: Food Processing, Pharmaceuticals, Commercial, Industrial, Audio / Visual, Wastewater Treatment, Robotics

Series 900/200 Power Commander (“Plus”) (15 kVA to 150 kVA Single Phase) (15 kVA to 450 kVA Three Phase)

• Precise electrical power for critical loads.• Automatic correction of voltage deviations to ± 1%

of nominal.• Adjustable output voltage.• Electronically and magnetically regulated — no moving

parts, virtually no preventive maintenance required.• High fault-clearing capability.• “Plus” models include computer-grade isolation

transformers.

Applications: Test Laboratories, Industrial, Commercial, Distributed Control Systems (DCS), Power Generation Authorities, Regulated Bypass for Uninterruptible Power Systems, Broadcast Communications

Power Conditioning Voltage Regulators

5

800PI models shown

Download product brochure and specifications from any product webpage: • Series 700F • Series 700A• Series 800A • Series 800PI • Series 900/200 • Series 900/200 “Plus”

Download product brochure and specifications from the product webpage: • ULTRA-K

Download product brochure and specifications from either product webpage: • Series 50 • AACD See more of our Industrial DC Power Supplies... visit our Rectifier product-family webpage!