september 2013 copyright (c) 2004-2013 - southcott … · adelaide (08) 8228 2411 (08) 8223 3413...

Telephone Fax EmailADELAIDE (08) 8228 2411 (08) 8223 3413 [email protected]

BRISBANE (07) 3375 4499 (07) 3375 4488 [email protected]

EMERALD (07) 4988 1800 (07) 4982 0280 [email protected]

DEVONPORT (03) 6427 0908 (03) 6427 0522 [email protected]

LAVERTON (03) 9371 9000 (03) 9360 0484 [email protected]

MACKAY (07) 4952 4056 (07) 4952 4367 [email protected]

MELBOURNE (03) 8551 0500 (03) 8551 0508 [email protected]

NEWCASTLE (02) 4964 2123 (02) 4964 2235 [email protected]

PERTH (08) 9454 9311 (08) 9454 9366 [email protected]

SYDNEY (02) 9838 9033 (02) 9838 9133 [email protected]

Cop

yrig

ht (

C)

2004

-201

3 -

Sou

thco

tt P

ty L

td

The Complete Solution

September 2013

Important Warnings and Cautions:

WARNINGS:Do not mix and match products.The mixing of product brands in hose assemblies is not recommended.Hydraulic hose from one supplier has seldom been verified by testing with fittings fromanother. Performance capabilities of such mixed assemblies will therefore be unpredictableand are not guaranteed by either supplier. Hose coupling specifications and publishedassembly instructions are not necessarily valid in these instances.It is the hose assembler’s responsibility to consult with suppliers before intermixing hose andend fittings. Similarly, assembly equipment is not usually interchangeable and it is the fabricator’sresponsibility to consult with the manufacturer for the correct equipment.Always follow the manufacturer’s instructions for correct preparation and fabrication ofCHILD-GATES hose assemblies.The welding of any CHILD fitting, including weld-on, salvage, lifesaver or any othercomponents should only be carried out by suitably qualified personnel. The Company doesnot warrant the performance of such fittings or products, once welded (except by theCompany, its servants or its selling agents). These welded products should be tested andproved fit for the use intended. Not testing, not proving, faulty fabrication or faulty weldingmay result in an unsatisfactory or even dangerous product.

BE AWARE THAT:Hydraulic fluid under pressure can be potentially dangerous! An explosive burst orstream of escaping fluid can cause damage to equipment or serious injury to persons nearby.Highly pressurized fluid escaping from a small pinhole can be almost invisible, and yet exertextreme force capable of penetrating the skin and other tissues, causing possible severeinjury.Pressurized fluids, if released uncontrolled, can exert a tremendous explosive force.Hot fluids or chemicals can cause severe burns.Some fluids are highly flammable

CAUTIONS:Working Pressures for Hose AssembliesSince many factors influence the pressure at which a hydraulic system will or will not performsatisfactorily, stated maximum hose working pressures should not be exceeded.For any severe applications it is recommended sufficient testing be conducted and reviewedby both the hose assembler and the machine manufacturer to assure performance levels willbe safe and satisfactory.

While all care has been taken to ensure that information contained in this catalogue istrue and correct at the time of publication, Southcott Hydraulics gives no warranty orassurance, and makes no representation as to the accuracy of any information oradvice contained in this catalogue, or that it is suitable for your intended application.

I

Fluid Connectors Product GuideContents

Nomographic Chart ........................................................ IIOil Flow Capacity Of Hose & Tubing ........................... IIIChild Coupling End Style Nomenclature....................... IV

SECTION 1: HYDRAULIC HOSE ................................................ 1Extremely High Pressure................................................ 1.3High Pressure ................................................................. 1.7Medium Pressure............................................................ 1.15Fleet Application ............................................................ 1.17Thermoplastic................................................................. 1.20Low Pressure .................................................................. 1.25Refrigerant...................................................................... 1.28Industrial......................................................................... 1.28Marine ............................................................................ 1.29Automotive..................................................................... 1.29Stainless Steel................................................................. 1.33Fire Suppressant ............................................................. 1.33Hose Accessories & Protection ...................................... 1.34

SECTION 2: FIELD-FIT COUPLINGS........................................ 2Lock-On ......................................................................... 2.13Clamp-On ....................................................................... 2.15

SECTION 3: PERMANENT CRIMP COUPLINGS.................... 3Super-Crimp Two-Piece Couplings ............................... 3.7Ezi-Crimp One-Piece Couplings.................................... 3.17Global-CrimpTwo-Piece Couplings (GS & GSP) ......... 3.19Global-Crimp GSH One-Piece Couplings ..................... 3.25Maxi-Crimp Two-Piece Couplings ................................ 3.28Vacu-Crimp One-Piece Couplings................................. 3.30

SECTION 4: ADAPTORS............................................................... 4

SECTION 5: ACCESSORIES......................................................... 5Quick Release Couplings ............................................... 5.3Swivel Joints (Tema)...................................................... 5.10Porta-Power Hoses ......................................................... 5.11Pipe Clamps.................................................................... 5.12Swivel Joints (Hydraulics Inc) ....................................... 5.17Rotary Couplings (MTC) ............................................... 5.20Pressure Gauges ............................................................. 5.20Test Points ...................................................................... 5.22Hydraulic Tube............................................................... 5.24Compression Fittings...................................................... 5.25Hose Clamps .................................................................. 5.26Swaging Machines ......................................................... 5.29Cut-Off Saws.................................................................. 5.29

III

OIL

FLO

W C

APA

CIT

Y O

F H

OS

E A

ND

TU

BIN

G

INS

IDE

DIA

ME

TE

R

SU

CTIO

N L

INE

S

(-0

.25

TO 0

BA

R)

HIG

H E

FFIC

IEN

CY L

INES

(0 T

O 3

5 B

AR

)C

ON

TIN

UO

US R

UN L

INE

S

(36

TO 2

07

BA

R)

I NT

ER

MIT

TEN

T R

UN L

INE

S

(20

8 B

AR

& A

BO

VE)

1.2

M/

SEC

4FT/

SEC

3M

/S

EC

10

FT/

SE

C4

.5M

/S

EC

15

FT/

SEC

6.1

M/

SEC

20

FT/

SEC

LTR

/M

INU

S G

PM

LTR

/M

INU

S G

PM

LT

R/

MIN

US

GP

MLTR

/M

INU

S G

PM

1/

4”

2.3

0.6

5.7

1.5

92.3

11

3

5/

16

”3.8

19

2.4

14

3.6

18

4.8

3/

8”

5.3

1.4

13

3.4

19

527

7

1/

2”

9.5

2.5

23

634

945

12

5/

8”

15

3.8

38

10

53

14

72

19

3/

4”

21

5.5

53

14

79

21

106

28

7/

8”

28

7.5

72

19

107

28

142

37

1”

38

10

85

25

140

37

185

49

1 1

/4

”57

15

144

38

216

57

231

61

1 1

/2

”83

22

209

55

314

83

416

110

1 3

/4

”114

30

285

75

426

112

570

150

2”

148

39

371

97

556

147

742

196

2 1

/2

”231

61

579

153

870

230

1158

306

3”

333

88

832

220

1249

330

1669

441

IV

Coupling End Style Nomenclature

Child couplings feature a meaningful description by combining end-style codes shown below that make thread end identification fast and easy. Always refer to Child Crimp Data Charts when selecting hose and coupling combinations.

In the following example, the Child description SFJ90C-0906 identifies a Supercrimp female JIC swivel 90° close coupling for 9/16” thread size and 3/8” hose size.

S F J 90 C - 09 06

Series

ThreadOrientation

ThreadType

Angle

AngleType

ThreadSize

HoseSize

SeriesE Ezicrimp - 1 pieceS Supercrimp - 2 piece

C5 Field-Fit - suit R5 hoseC5E Field-Fit - suit R5E hoseR Field-Fit - suit R1, R2 & R3 hoseL Lock-On - suit pushlock hose

Thread OrientationF FemaleM Male

Thread TypeB BSP TaperedDKL DIN Light SeriesDKS DIN Heavy SeriesDKO DIN Heavy Series & O-RingFL Flange Code 61FLH Flange Code 62FLK Flange KomatsuFO Flat Face O-Ring (ORFS)G Grease FittingGAZ French GAZ

Thread Type (cont’d)HJ Hose JoinerIX SAE Inverted FlareJ JICK JIS-Metric (Japanese)LS LifesaverN NPTNF NPT - Female FixedNL NPT - Long SeriesNP JIS-BSPP (Japanese)OX SAE O-Ring Boss SwivelP BSP ParallelS SAESS Staple Series

Angle(none) Straight45 45° Bend90 90° Bend

Angle Type(none) Standard DropC Close L Long Drop

Code Description Code Description

Due to continual product improvement., we reserve the right to alter specifications without notice 1.1

Section 1Hydraulic Hose

ContentsPart No. ................ Description ...........................................................................................................................Page

Extremely High PressureEFG6K .................. 4 & 6 Wire Spiral Hose (SAE 100R15) ..................................................................................1.3EFG6K-MTF......... 4 & 6 Wire Spiral Hose MegaTuff®(abrasion-resistant cover)(SAE 100R15) ......................1.3EFG5K .................. 4 & 6 Wire Spiral Hose (SAE 100R13) ..................................................................................1.4EFG5K-MTF......... 4 & 6 Wire Spiral Hose MegaTuff®(abrasion-resistant cover) (SAE 100R13) .....................1.4EFG4K .................. 4 Wire Spiral Hose (SAE 100R12) .........................................................................................1.5EFG4K-MTF......... 4 Wire Spiral Hose MegaTuff® (abrasion-resistant cover)(SAE 100R12) ............................1.5EFG3K .................. 4 - Wire Spiral Hose (SAE 100R12 & EN8564SP)................................................................1.6EFG3K-MTF......... 4 - Wire Spiral Hose MegaTuff® (abrasion-resistant cover)(SAE 100R12 & EN8564SP) ..1.6

High PressureM5K ...................... 2 - Wire Braid Hose Mega 5000® ..........................................................................................1.7M5K-XTF ............. 2 - Wire Braid Hose Mega 5000® XtraTuff®(abrasion-resistant cover) ...............................1.7M5K-MTF............. 2 - Wire Braid Hose Mega 5000® MegaTuff®(abrasion-resistant cover) .............................1.7M4K ...................... 2 - Wire Braid Hose Mega 4000® ..........................................................................................1.8M4K-XTF ............. 2 - Wire Braid Hose Mega 4000® XtraTuff®(abrasion-resistant cover) ...............................1.8M4K-MTF............. 2 - Wire Braid Hose Mega 4000® MegaTuff®(abrasion-resistant cover) .............................1.8M3K ...................... 1 & 2 Wire Braid Hose Mega 3000® (SAE 100R17) ............................................................1.9M3K-XTF ............. 1 & 2 Wire Braid Hose Mega 3000® XtraTuff®(abrasion-resistant cover) (SAE 100R17) .1.9M3K-MTF............. 1 & 2 Wire Braid Hose Mega 3000® MegaTuff®(abrasion-resistant cover (SAE 100R17).1.9M2T....................... 2 - Wire Braid Hose MegaFlex® (SAE 100R16) ...................................................................1.10M2T-XTF.............. 2 - Wire Braid Hose XtraTuff® (abrasion-resistant cover)(SAE 100R16) ............................1.10M2T-MTF ............. 2 - Wire Braid Hose MegaTuff® (abrasion-resistant cover)(SAE 100R16) ..........................1.10CM2T.................... 2 - Wire Braid Hose MegaFlex® (SAE 100R2AT) Twin ......................................................1.11G2.......................... 2 - Wire Braid Hose (SAE 100R2 Type AT & DIN 20022 2SN)...........................................1.12G2XH.................... 2 - Wire Braid Hose Extreme Heat (SAE 100R2 & Flame Resistance U.S. MSHA 2G).......1.12G2H....................... 2 - Wire Braid Hose (SAE 100R2 Type AT & High Temperature DIN 20022 2SN) ............1.13J2AT...................... 2- Wire Braid (MHI J100).......................................................................................................1.14

Medium PressureG1.......................... 1 - Wire Braid Hose (SAE 100R1 Type AT & DIN 20022 1SN)...........................................1.15G1H....................... 1 - Wire Braid Hose (SAE 100R1 Type AT & DIN 20022 1SN) High Temperature ............1.15MegaTech 1000..... 1 - Wire Braid Hose (SAE J1402, SAE J1019 & DOT FMVSS 106-74) High Temperature 1.16MegaTech II .......... 2 - Wire Braid Hose (SAE 100R2AT & SAE 100 R2 Type S) High Temperature................1.16

Fleet ApplicationMegaTech 500....... 1 - Wire Braid Hose (DOT SAE J1019) Hot oil return hose ..................................................1.17C5C ....................... 1 - Wire Braid Hose (SAE 100R5) (SAE J1402 Type AII) ....................................................1.17C5E........................ 1 - Wire Braid Hose (SAE J1019 and SAE J1402 Type AI) ..................................................1.18G3H....................... 2 - Textile Braid Hose (SAE 100R3) High Temperature (DIN 20021) ..................................1.19

ThermoplasticTH8 ....................... 2 - Braid Hose (SAE 100R8 Black Covered Pin Perforated Thermoplastic Hose)) ...............1.20TH8NC.................. 2 - Braid Hose (SAE 100R8 Orange Covered Non-Conductive Thermoplastic Hose) ..........1.20TH7 ....................... 1 - Braid Hose (SAE 100R7 Black Covered Pin Perforated Thermoplastic Hose) ................1.21TH7NC.................. 1 - Braid Hose (SAE 100R7 Orange Covered Non-Conductive Thermoplastic Hose) ..........1.22TH7DL.................. 1 - Braid Twin Hose (SAE 100R7 Black Covered Pin Perforated Thermoplastic Hose).......1.23TH7NCDL ............ 1 - Braid Twin Hose (SAE 100R7 Orange Covered Non-Conductive Thermoplastic Hose).1.24

Low PressureGMV ..................... 1 - Helical Wire Hose MegaVac® (SAE 100R4) ...................................................................1.25Hozeflex ................ 1 - Helical Wire Suction Hose ................................................................................................1.25RLA....................... 1 - Textile Braid Hose (SAE 30R2) ........................................................................................1.26LOL+..................... 1 - Textile Braid Hose (Lock-On)...........................................................................................1.27LOC....................... 1 - Textile Braid Hose (Textile Cover Lock-On)....................................................................1.27

1.2 Due to continual product improvement., we reserve the right to alter specifications without notice


ContentsPart No. ................ Description ........................................................................................................................Page

RefrigerantPolar Seal............... 1 - Braid Hose (R134a, R12 and R22 Refrigerants)............................................................... 1.28

IndustrialPowerclean ............ 1 - Braid Hose PowerClean™ Pressure Washer Hose ........................................................... 1.28

MarineC5M....................... 1 - Wire Braid (SAE J1527Type A, Class 1, SAE J1952) ..................................................... 1.29

Fuel LineC5D ....................... 1 - Wire Braid (SAE J1402 and SAE J1019) ......................................................................... 1.29Safety Stripe II ...... Reinforced Nitrile Rubber (SAE 30R6 & SAE 30R7)........................................................... 1.304219....................... 1 - Textile Braid (SAE 30R6 & SAE 30R7) .......................................................................... 1.30

AutomotivePS-188 ................... Synthetic Rubber (SAE J2050 Type 1) Power Steering Hose ............................................... 1.312700*..................... Type P (EPDM) (SAE J1037, SAE J942b) Windshield Washer Hose .................................. 1.31

Air and Multi-PurposeTerminator............. 1 - Textile Braid (MSHA 30 CFR 18.65) Flame Resistant Air & Multipurpose Hose.......... 1.32Premo Flex ............ 1 - Textile Braid Air & Multipurpose Hose ........................................................................... 1.32

Stainless SteelAFX....................... 1 or 2 Braid Hose (Stainless Steel Braided Teflon Hose) ...................................................... 1.33

Fire SuppressionRFS........................ 1 - Wire Braid (SAE 100R Type S) Flame Resistant Fire Suppressant Hose ....................... 1.33

Hose AccessoriesHSG....................... Wire Spring Guard ................................................................................................................. 1.34AB00* ................... Hose Straps & Bunch Binders................................................................................................ 1.34HPSG..................... Flat Plastic Guard ................................................................................................................... 1.35SGX....................... Flat Plastic SpiralGuard™...................................................................................................... 1.35HNG ...................... Nylon Protective Sleeve ......................................................................................................... 1.36LIFEGUARD ........ Nylon Protective Hose Burst Sleeve Flame Resistant............................................................ 1.36TEXSLEEVE ........ Nylon Protective Hose Burst Sleeve Flame Resistant............................................................ 1.37HBR....................... Bend Restrictor....................................................................................................................... 1.37HTG....................... HeatGuard Silicon Fire Jacket................................................................................................ 1.38



GATES EFG6KEXTREMELY HIGH PRESSURE4 & 6 SPIRAL WIRE HOSE(S.A.E. 100R15)Recommended For: Extremely high pressure, high impulse applications such as hydrostatic transmissions. EFG6K is designed to meet all requirements of SAE 100R15 specifications and performance requirements of EN 856 4SP (-6, -8, -10 and -12) and EN 856 4SH (-12, -16, -20 and -24)Meets flame resistance acceptance designation “MSHA 2G”Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as standardpetroleum-based fluids.Revolutionary Design: Makes designing and plumbing of extremely high pressure hydraulic systems easy and efficient. 5/8” to 1 1/2” sizes are available in 36m and 60m continuous lengths. Tube:(EFG6K) Black, oil resistant, synthetic rubber. (Nitrile - Type C). 24G6K neoprene-typeAReinforcement: Four (six for -20 and -24) alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene- Type A). Blue stripe with gold print layline. Available with unique abrasion-resistant MegaTuff® coverTemperature Range: -40°F to +250°F (-40°C to +121°C). Couplings: Global-Crimp series.

GATES EFG6K-MTFEXTREMELY HIGH PRESSUREMEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945

SPECIFICATIONS

Part No.

Hose SizeWorkingPressure

Min. BurstPressure

Min. BendRad.

Length Couplings

Carton BulkGlobal-Crimp

Non-SkiveGlobal-Crimp

Non-Skive

I.D.in.

O.D.in.

psi bar psi bar mm m m One Piece Stem

SeriesFerrule Part No

6EFG6K 3/8 0.80 6000 414 24000 1655 64 30 - - 6GS 6GS1F-48EFG6K 1/2 0.95 6000 414 24000 1655 89 30 - - 8GS 8GS1F-4

10EFG6K 5/8 1.09 6000 414 24000 1655 102 30 61 - 10GS 10GS1F-412EFG6K 3/4 1.24 6000 414 24000 1655 120 30 61 - 12GS 12GS1F-416EFG6K 1 1.53 6000 414 24000 1655 155 30 61 - 16GS 16GS1F-420EFG6K 1 1/4 1.97 6000 414 24000 1655 210 15 61 - 20GS 20GS1F-624EFG6K 1 1/2 2.26 6000 414 24000 1655 254 15 61 24GSH - -32EFG6K 2 2.80 6000 414 24000 1655 635 15 61 32GSH - -

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRadius

Approx. Carton Length

Couplings

Global-CrimpNon-Skive


I.D.in.

O.D.in.

psi bar psi bar mm m One PieceStem


6EFG6K-MTF 3/8 0.80 6000 414 24000 1655 64 30 6GS 6GS1F-48EFG6K-MTF 1/2 0.95 6000 414 24000 1655 89 30 8GS 8GS1F-4

10EFG6K-MTF 5/8 1.09 6000 414 24000 1655 102 30 10GS 10GS1F-412EFG6K-MTF 3/4 1.24 6000 414 24000 1655 120 30 12GS 12GS1F-416EFG6K-MTF 1 1.53 6000 414 24000 1655 155 30 16GS 16GS1F-420EFG6K-MTF 1 1/4 1.97 6000 414 24000 1655 210 15 20GS 20GS1F-624EFG6K-MTF 1 1/2 2.26 6000 414 24000 1655 254 15 24GSH - -



GATES EFG5KEXTREMELY HIGH PRESSURE4 & 6 SPIRAL WIRE HOSE(S.A.E. 100R13)Recommended For: Extremely high pressure hydraulic applications. EFG5K is designed to meet all requirements of SAE 100R13 specifications and performance requirements of EN 856 4SH (-16, -20, -24 and -32) and EN 856 4SP (-8, -10 and -12). and EN 856 R13. 1/2” to 2”sizes are available in 36m to 61m continuous lengths. Meets flame resistance acceptance designation “MSHA 2G”Compatible with biodegradable hydraulic fluids like polyolester, polyglycol and vegetable oil as well as stan-dard petroleum-based fluids.Tube: Black, oil resistant, synthetic rubber. (Sizes 06 to 20 Nitrile - Type C, sizes 24 & 32 Neoprene - Type A). Reinforcement: Four (six for 20, -24 and -32) layers of alternated, spiraled, high tensile steel wireCover: Black, oil resistant synthetic rubber (Neoprene-Type A). Blue stripe with red print layline. Temperature Range: -40°F to +250°F (-40°C to +121°C). Couplings: Global-Crimp series.

GATES EFG5K-MTF EXTREMELY HIGH PRESSUREMEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Length Couplings


Non SkiveGlobal-Crimp

Non-Skive

I.D.in.

O.D.in.

psi bar psi bar mm m m One PieceStem


6EFG5K 3/8 0.80 5000 345 20000 1379 64 30 - 6GS 6GS1F-48EFG5K 1/2 0.94 5000 345 20000 1379 89 30 61 - 8GS 8GS1F-4

10EFG5K 5/8 1.11 5000 345 20000 1379 102 30 61 - 10GS 10GS1F-412EFG5K 3/4 1.26 5000 345 20000 1379 120 30 61 - 12GS 12GS1F-416EFG5K 1 1.53 5000 345 20000 1379 155 30 61 - 16GS 16GS1F-420EFG5K 1 1/4 1.97 5000 345 20000 1379 210 15 61 - 20GS 20GS1F-624EFG5K 1 1/2 2.26 5000 345 20000 1379 254 15 61 24GSH32EFG5K 2 2.80 5000 345 20000 1379 635 15 61 32GSH - -

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

LENGTH Couplings



Non-Skive

I.D.in.

O.D.in.

psi bar psi bar mm m One PieceStem


6EFG5K-MTF 3/8 0.80 5000 345 20000 1379 64 30 - 6GS 6GS1F-48EFG5K-MTF 1/2 0.94 5000 345 20000 1379 89 30 - 8GS 8GS1F-4

10EFG5K-MTF 5/8 1.11 5000 345 20000 1379 102 30 - 10GS 10GS1F-412EFG5K-MTF 3/4 1.26 5000 345 20000 1379 120 30 - 12GS 12GS1F-416EFG5K-MTF 1 1.53 5000 345 20000 1379 155 30 61 - 16GS 16GS1F-420EFG5K-MTF 1 1/4 1.97 5000 345 20000 1379 210 15 61 - 20GS 20GS1F-624EFG5K-MTF 1 1/2 2.26 5000 345 20000 1379 254 15 61 24GSH - -32EFG5K-MTF 2 2.80 5000 345 20000 1379 635 15 61 32GSH - -



GATES EFG4KEXTREMELY HIGH PRESSURE4 SPIRAL WIRE HOSE(S.A.E. 100R12)Recommended For: Extremely high pressure, high impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 4SP (-16). Meets flame resistance acceptance designation “MSHA 2G”Compatible with biodegradable hydraulic fluids like polyolester, polyglycole and vegetable oil as well as standardpetroleum based fluids. Available in 36 through 60 metre lengths.Tube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Four alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene Type A). Blue stripe with white print layline.Temperature Range: -40°F to +250°F (-40°C to +121°C).Couplings: Super-Crimp and Global-Crimp series.


SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Length Couplings

Carton BulkSuper-Crimp


Non-Skive

I.D.in.

O.D.in.

psi bar psi bar mm mStem

SeriesFerrulePart No

Stem Series

Ferrule Part No

6EFG4K 3/8 0.80 4000 275 16000 1103 64 30 S FNS-06 6GS 6GS1F-48EFG4K 1/2 0.94 4000 275 16000 1103 89 30 61 S FNS-08 8GS 8GS1F-4

10EFG4K 5/8 1.09 4000 275 16000 1103 102 30 61 S FNS-10 10GS 10GS1F-412EFG4K 3/4 1.21 4000 275 16000 1103 122 30 61 S FNS-12 12GS 12GS1F-416EFG4K 1 1.50 4000 275 16000 1103 152 30 61 S FNS-16 16GS 16GS1F-420EFG4K 1 1/4 1.85 4000 275 16000 1103 210 15 61 S FNS-20 20GS 20GS1F-4

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Length Couplings

Carton BulkSuper-Crimp


Non-Skive

I.D.in.

O.D.in.



Stem Series

Ferrule Part No

6EFG4K-MTF 3/8 0.80 4000 275 16000 1103 64 30 S FNS-06 6GS 6GS1F-48EFG4K-MTF 1/2 0.94 4000 275 16000 1103 89 30 S FNS-08 8GS 8GS1F-4

10EFG4K-MTF 5/8 1.09 4000 275 16000 1103 102 30 S FNS-10 10GS 10GS1F-412EFG4K-MTF 3/4 1.21 4000 275 16000 1103 122 30 61 S FNS-12 12GS 12GS1F-416EFG4K-MTF 1 1.50 4000 275 16000 1103 152 30 61 S FNS-16 16GS 16GS1F-420EFG4K-MTF 1 1/4 1.85 4000 275 16000 1103 210 15 61 S FNS-20 20GS 20GS1F-4



GATES EFG3KEXTREMELY HIGH PRESSURE4 SPIRAL WIRE HOSE(S.A.E. 100R12)Recommended For: Extremely high pressure, high impulse applications. Exceeds all performance requirements for SAE 100R12, EN 856 4SP. Meets flame resistance acceptance designation “MSHA 2G”Compatible with biodegradable hydraulic fluids like polyolester, polyglycole and vegetable oil as well as stan-dard petroleum based fluids. Available in 36 through 60 metre lengths.Tube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Four alternating layers of spiraled, high-tensile steel. Cover: Black, oil resistant, synthetic rubber. (Neoprene Type A). Blue stripe with white print layline.Temperature Range: -40°F to +250°F (-40°C to +121°C).Couplings: Global-Crimp and GSP Series.


SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Lengths Couplings


Non-SkiveGSP Series

Non-Skive

I.D.in.

O.D.in.



Stem Series

Ferrule Part No

20EFG3K 1-1/4 1.85 3000 207 12000 828 210 15 61 20GS 20GS1F-4 - -24EFG3K 1-1/2 2.11 3000 207 12000 828 254 15 61 - - 24GSP 24GSP1F-432EFG3K 2 2.63 3000 207 12000 828 635 15 61 - - 32GSP 32GSP1F-4

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Length Couplings


Non-SkiveGSP Series

Non-Skive

I.D.in.

O.D.in.



Stem Series

FerrulePart No

20EFG3K-MTF 1-1/4 1.85 3000 207 12000 828 210 15 61 20GS 20GS1F-4 - -24EFG3K-MTF 1-1/2 2.11 3000 207 12000 828 254 15 61 - - 24GSP 24GSP1F-432EFG3K-MTF 2 2.63 3000 207 12000 828 635 15 61 - - 32GSP 32GSP1F-4



GATES M5K Mega5000®

HIGH PRESSURERecommended For: High pressure hydraulic applications. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing.Meets flame resistance acceptance designation “MSHA 2G”

Tube: Black, oil-resistant, synthetic rubber. (Nitrile-Type C).Reinforcement: Two braids of high-tensile steel wire.Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile-Type C2)Temperature Range:-40°F to +212°F (-40°C to +100°C).Couplings: Gates Mega-Crimp series.

XTRATUFF® SPECIFICATIONSHose lasts up to 25times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests

MEGATUFF® SPECIFICATIONSHose lasts up to 300times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings

Mega-CrimpNon-Skive

I.D.in.

O.D.in.

psi bar psi bar mm m One Piece Series

4M5K 1/4 0.54 5000 345 20000 1379 51 134 4G-6M5K 3/8 0.69 5000 345 20000 1379 64 100 6G-8M5K 1/2 0.86 5000 345 20000 1379 89 67 8G-

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings

Mega-CrimpNon-Skive

I.D.in.

O.D.in.


4M5K-XTF 1/4 0.54 5000 345 20000 1379 51 134 4G-6M5K-XTF 3/8 0.69 5000 345 20000 1379 64 100 6G-8M5K-XTF 1/2 0.86 5000 345 20000 1379 89 67 8G-

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings

Mega-CrimpNon-Skive

I.D.in.

O.D.in.


4M5K-MTF 1/4 0.54 5000 345 20000 1379 51 134 4G-6M5K-MTF 3/8 0.69 5000 345 20000 1379 64 100 6G-8M5K-MTF 1/2 0.86 5000 345 20000 1379 89 67 8G-




HIGH PRESSURE (exceeds SAE 100R19 & ISO11237 R19)Recommended For: High pressure hydraulic applications. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing.Meets flame resistance acceptance designation “MSHA 2G”Tube: Black, oil-resistant, synthetic rubber (Nitrile- Type C). Reinforcement: Two braids of high tensile steel wire.Cover: Black, oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile- Type C2). Available with unique abrasion resistant Megatuff® cover.Temperature Range: -40°F to +212°F (-40°C to +100°C).Couplings: Super-Crimp, Global-Crimp and Mega-Crimp series.

EXTRATUFF® SPECIFICATIONSHose lasts up to 25 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests

MEGATUFF® SPECIFICATIONSHose lasts up to 300 times longer than the standard hose during hose-to-hose and hose-to-metal abrasion tests

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings

Super-CrimpNon-Skive


I.D.in.

O.D.in.



StemSeries

FerrulePart No

4M4K 1/4 0.54 4000 276 16000 1103 38 134 S FN4P-04 - -6M4K 3/8 0.69 4000 276 16000 1103 51 100 S FN4P-06 - -8M4K 1/2 0.86 4000 276 16000 1103 71 67 S FNP-08 - -

10M4K 5/8 0.98 4000 276 16000 1103 76 67 S FNP-10 - -12M4K 3/4 1.14 4000 276 16000 1103 97 67 S FNS-12 - -16M4K 1 1.52 4000 276 16000 1103 114 50 - - GS 16GS1F-4

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings



I.D.in.

O.D.in.



StemSeries

FerrulePart No

4M4K -XTF 1/4 0.54 4000 276 16000 1103 38 134 S FN4P-04 - -6M4K -XTF 3/8 0.69 4000 276 16000 1103 51 100 S FN4P-06 - -8M4K -XTF 1/2 0.86 4000 276 16000 1103 71 67 S FNP-08 - -10M4K-XTF 5/8 0.98 4000 276 16000 1103 76 67 S FNP-10 - -12M4K-XTF 3/4 1.14 4000 276 16000 1103 97 67 S FNS-12 - -16M4K-XTF 1 1.52 4000 276 16000 1103 114 50 - - GS 16GS1F-4

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings



I.D.in.

O.D.in.



StemSeries

FerrulePart No

4M4K -MTF 1/4 0.54 4000 276 16000 1103 38 134 S FN4P-04 - -6M4K -MTF 3/8 0.69 4000 276 16000 1103 51 100 S FN4P-06 - -8M4K -MTF 1/2 0.86 4000 276 16000 1103 71 67 S FNP-08 - -10M4K-MTF 5/8 0.98 4000 276 16000 1103 76 67 S FNP-10 - -12M4K -MTF 3/4 1.14 4000 276 16000 1103 97 57 S FNS-12 - -16M4K -MTF 1 1.52 4000 276 16000 1103 114 50 - - GS 16GS1F-4




HIGH PRESSURE (exceeds SAE 100R17 & ISO11237 R17)225 bar 3250 psi Recommended For: High pressure hydraulic oil lines. M3K hose has smaller exterior dimensions and significantly tighter bend radius than other SAE 100R1 and 100R2 hose. Meets flame resistance acceptance designation “MSHA 2G”Tube: Black, oil-resistant, synthetic rubber (Nitrile-Type C). Reinforcement: Braided high tensile steel wire. -4, -6 and -8 sizes are one braid; -10, -12 and -16 sizes are two-braid.Cover: Black, oil, abrasion and weather resistant, synthetic rubber. (Modified Nitrile-Type C2). Temperature Range: -40°F to +212°F (-40°C to +100°C)Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.



SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.


SeriesFerrule Part

NoOne Piece

Series

4M3K 1/4 0.47 3250 225 13000 897 38.1 134 S FN3P-04 E6M3K 3/8 0.62 3250 225 13000 897 50.8 100 S FN3P-06 E8M3K 1/2 0.78 3250 225 13000 897 71.1 67 S FN3P-08 E

10M3K 5/8 0.98 3250 225 13000 897 76.2 67 S FNP-10 -12M3K 3/4 1.14 3250 225 13000 897 96.5 67 S FNP-12 E16M3K 1 1.48 3250 225 13000 897 114.3 50 S FNS-16 -

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.


SeriesFerrule Part

NoOne Piece

Series

4M3K-XTF 1/4 0.47 3250 225 13000 897 38.1 134 S FN3P-04 E6M3K-XTF 3/8 0.62 3250 225 13000 897 50.8 100 S FN3P-06 E8M3K-XTF 1/2 0.78 3250 225 13000 897 71.1 67 S FN3P-08 E

10M3K-XTF 5/8 0.98 3250 225 13000 897 76.2 67 S FNP-10 -12M3K-XTF 3/4 1.14 3250 225 13000 897 96.5 67 S FNP-12 E16M3K-XTF 1 1.56 3250 225 13000 897 114.3 50 S FNS-16 -

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.


SeriesFerrule Part

NoOne Piece

Series

4M3K-MTF 1/4 0.47 3250 225 13000 897 38.1 134 S FN3P-04 E6M3K-MTF 3/8 0.62 3250 225 13000 897 50.8 100 S FN3P-06 E8M3K-MTF 1/2 0.78 3250 225 13000 897 71.1 67 S FN3P-08 E

10M3K-MTF 5/8 0.98 3250 225 13000 897 76.2 67 S FNP-10 -12M3K-MTF 3/4 1.14 3250 225 13000 897 96.5 67 S FNP-12 E16M3K-MTF 1 1.56 3250 225 13000 897 114.3 50 S FNS-16 -



GATES M2T MegaFlex®

HIGH PRESSURE (SAE 100R16)EXTRA FLEXIBLERecommended For: High pressure hydraulic oil lines. Exceeds SAE 100R16 requirements and meets or exceeds EN 853 2SN. M2T hose has smaller exterior dimensions and significantly tighter bend radius.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant, synthetic rubber. (Nitrile- Type C). Reinforcement: Two braids, of high-tensile steel wire. Cover: Black, oil, abrasion and weather resistant, synthetic rubber. (Modified Nitrile-Type C2). Green stripe layline.Temperature Range: -40°F to +212°F (-40°C to +100°C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.



SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.


SeriesFerrule Part

NoOne Piece

Series

4M2T 1/4 0.54 6000 414 24000 1655 38 167 S FNP-03 E6M2T 3/8 0.69 5000 345 20000 1379 50 117 S FNM2P-06 E8M2T 1/2 0.81 4300 297 17200 1186 70 100 S FNM2P-08 E

10M2T 5/8 0.95 3800 262 15200 1048 75 67 S FNM2P-10 -12M2T 3/4 1.10 3500 241 14000 966 95 67 S FNM2P-12 E16M2T 1 1.38 2500 172 10000 690 114 50 S FNM2P-16 -

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.


SeriesFerrule Part

NoOne Piece Series

4M2T-XTF 1/4 0.54 6000 414 24000 1655 38 167 S FNP-03 E6M2T-XTF 3/8 0.69 5000 345 20000 1379 50 117 S FNM2P-06 E8M2T-XTF 1/2 0.81 4300 297 17200 1186 70 117 S FNM2P-08 E

10M2T -XTF 5/8 0.95 3800 262 15200 1048 75 67 S FNM2P-10 -12M2T -XTF 3/4 1.10 3500 241 14000 966 95 67 S FNM2P-12 E16M2T -XTF 1 1.38 2500 172 10000 690 114 50 S FNM2P-16 -

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.


SeriesFerrule Part

NoOne Piece Series

4M2T-MTF 1/4 0.54 6000 414 24000 1655 38 167 S FNP-03 E6M2T-MTF 3/8 0.69 5000 345 20000 1379 50 117 S FNM2P-06 E8M2T-MTF 1/2 0.81 4300 297 17200 1186 70 117 S FNM2P-08 E

10M2T -MTF 5/8 0.95 3800 262 15200 1048 75 67 S FNM2P-10 -12M2T -MTF 3/4 1.10 3500 241 14000 966 95 67 S FNM2P-12 E16M2T -MTF 1 1.38 2500 172 10000 690 114 50 S FNM2P-16 -



GATES CM2T MegaFlex® TWIN HOSEHIGH PRESSUREEXTRA FLEXIBLE(SAE 100R16)Recommended For: High pressure hydraulic oil lines such as forklift applications. Exceeds SAE100R16 requirements and meets or exceeds performance standards of EN 857 2SC and ISO/DIS 1436CM2T hose has a smaller exterior dimensions and significantly tighterbend radius.Meets flame resistance acceptance designation “MSHA 2GTube: Black oil resistant, synthetic rubber (Nitrile-Type C). Reinforcement: Two braids, of high-tensile steel wire. Cover: Black oil, abrasion and weather resistant, synthetic rubber (Modified Nitrile - Type C2)Temperature Range: -40°F to +212°F (-40°C to +100°C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.

psi bar psi bar mmStem

SeriesFerrule Part

NoOne Piece

Series

6CM2T 3/8 0.69 5000 345 20000 1379 50 S FNM2P-06 E8CM2T 1/2 0.81 4300 297 17200 1186 70 S FNM2P-08 E



GATES G2 HIGH PRESSURE(SAE 100R2AT & SAE 100R2 Type S)Recommended For: High pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S and performance requirements of EN 853 2SN. Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant, synthetic rubber. (Nitrile - Type C).Reinforcement: Two braids of high-tensile steel wire. Cover: Black, oil and abrasion resistant thin synthetic rubber (Modified Nitrile - Type C2).Temperature Range: -40°F to +212°F (-40°C to +100°C). Couplings: Super-Crimp, Ezi-Crimp and Gates MegaCrimp series couplings.

GATES G2XH 2Wire Braid Extreme Heat HoseHIGH PRESSURE (SAE 100R2AT)Recommended For: High-pressure hydraulics applications where pressure or temperature requirements exceed SAE 100R2AT or where resistence to either petroleum-base or phosphate ester fluids is required. Meets or exceeds the requirements of SAE 100R2 Type AT.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil and chemical resistant, synthetic rubber. (CPE)Reinforcement: Two braids of high-tensile steel wire. Cover: Blue, oil and abrasion resistant thin synthetic rubber (CSM) Flame Resistant U.S MSHA 2GTemperature Range: -40°F to +300°F (-40°C to +149°C).Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.

psi bar psi bar mm m mStem


One Piece Series

4G2 1/4 0.58 5800 400 23200 1600 102 102 167 S FNP-04 E5G2 5/16 0.64 5000 350 20000 1400 110 167 S FNP-05 -6G2 3/8 0.73 4800 330 19200 1320 127 91 122 S FNP-06 E8G2 1/2 0.86 4000 275 16000 1100 178 84 100 S FNP-08 E

10G2 5/8 0.98 3625 250 14500 1000 203 61 67 S FNP-10 -12G2 3/4 1.14 3100 215 12400 855 241 53 67 S FNP-12 E16G2 1 1.48 2400 165 9600 660 305 30 50 S FNP-16 -20G2 1 1/4 1.87 1825 125 7300 500 419 30 - S FNP-20 -24G2 1 1/2 2.15 1300 90 5000 345 508 30 - S FNP-24 -32G2 2 2.65 1175 81 4500 310 635 30 - S FNP-32 -

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.

psi bar psi bar mm m m Stem SeriesFerrulePart No

One Piece Series

4G2XH 1/4 0.58 6000 414 23200 1600 102 102 167 S FNP-04 E6G2XH 3/8 0.73 5000 345 19200 1320 127 91 122 S FNP-06 E8G2XH 1/2 0.86 4250 293 16000 1100 178 84 100 S FNP-08 E

10G2XH 5/8 0.98 3625 250 14500 1000 203 61 67 S FNP-10 -12G2XH 3/4 1.14 3100 215 12400 855 241 53 67 S FNP-12 E16G2XH 1 1.48 2500 172 9600 660 305 30 50 S FNP-16 -20G2XH 1-1/4 1.87 2250 155 9000 620 419 36 - S FNP-20



GATES G2H 2 WIRE BRAID HOSENON-SKIVE HIGH TEMPERATURE(SAE 100R2AT) Recommended For: High pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2AT and performance requirements of EN 853.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant, synthetic rubber (Nitrile - Type C). Reinforcement: Two braids of high-tensile steel wire. Cover: Black, oil resistant, synthetic rubber. (Hypalon® - Type M). Temperature Range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent- up to 10% ofoperating time.Couplings: Super-Crimp series.

Hypalon is a registered trademark of DuPont

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings


I.D.in.

O.D.in.



20G2H 1 1/4 1.87 1650 114 6600 455 419 30 S FNP-2024G2H 1 1/2 2.15 1300 89 5000 344 508 30 S FNP-2432G2H 2 2.65 1175 81 4500 310 635 30 S FNP-32



GATES J2ATJACKLINE HOSEHIGH PRESSURE2 WIRE BRAIDMHI - IJ100Recommended For: Hydraulic jack applications. Meets Material Handling Institute specification IJ 100 for hydraulic hose and assemblies used with jacking systems.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: Two braids of high tensile steel wire. Cover: Black, oil and abrasion resistant synthetic rubber. (Modified Nitrile - Type C2)Temperature Range: -40°F to +120°F (-40°C to +49°C). Couplings: Super-Crimp and Ezi-Crimp series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.

psi bar psi bar mm m Stem SeriesFerrule Part

NoOne Piece

Series

4J2AT 1/4 0.58 10000 689 20000 1862 102 106 S FNP-04 E6J2AT 3/8 0.74 10000 689 20000 1862 127 100 S FNP-06 E



GATES G1 MEDIUM PRESSURE(SAE 100R1 AT) Recommended For: Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100R1 Type AT and SAE 100R1 Type S and performance requirements of EN 853 1SN.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant, synthetic rubber (Nitrile - Type C).Reinforcement: One braid of high-tensile steel wire. Cover: Black, oil and abrasion-resistant, synthetic rubber. (Modified Nitrile - Type C2).Temperature Range: -40°F to +212°F (-40°C to +100°C). Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.

GATES G1H MEDIUM PRESSUREHIGH TEMPERATURESAE 100R1 ATRecommended For: Medium pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R1 Type AT. Tube: Black, oil-resistant, synthetic rubber (Nitrile - Type C).Reinforcement: One braid of high-tensile steel wire. Cover: Black, oil and abrasion-resistant, synthetic rubber. (Modified Nitrile - Type C2).Temperature Range: -40°F to +275°F (-40°C to +135°C).Couplings: Super-Crimp, Ezi-Crimp and Gates Mega-Crimp series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.



One Piece Series

3G1 3/16 0.47 3625 250 14500 1000 89 243 134 S FNP-03 -4G1 1/4 0.53 3275 225 13100 900 102 213 134 S FNP-04 E5G1 5/16 0.59 3125 215 12500 850 114 167 168 S FNP-05 -6G1 3/8 0.69 2600 180 10400 720 127 145 117 S FNP-06 E8G1 1/2 0.82 2325 160 9300 640 178 122 100 S FNP-08 E

10G1 5/8 0.94 1900 130 7600 520 203 91 67 S FNP-10 -12G1 3/4 1.10 1525 105 6100 420 241 61 67 S FNP-12 E16G1 1 1.41 1275 88 5100 352 305 30 50 S FNP-16 -20G1 1 1/4 1.71 925 63 3700 252 406 30 - S FNP-20 -24G1 1 1/2 1.96 725 50 2900 200 508 30 - S FNP-24 -32G1 2 2.52 600 41 2700 186 635 30 - S FNP-32 -

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Approx. Reel

Length

Couplings


Ezi-CrimpNon-Skive

I.D.in.

O.D.in.



One Piece Series

4G1H 1/4 0.53 2750 190 11000 759 102 213 134 S FNP-04 E6G1H 3/8 0.69 2250 155 9000 621 127 145 117 S FNP-06 E8G1H 1/2 0.82 2000 138 8000 552 178 122 100 S FNP-08 E

10G1H 5/8 0.94 1500 103 6000 414 203 91 67 S FNP-10 -12G1H 3/4 1.10 1250 86 5000 345 241 61 67 S FNP-12 E16G1H 1 1.41 1000 69 4000 276 305 30 50 S FNP-16 -20G1H 1 1/4 1.71 925 63 3700 252 406 30 - S FNP-20 -24G1H 1 1/2 1.96 725 50 2900 200 508 30 - S FNP-24 -32G1H 2 2.52 600 41 2400 166 635 30 - S FNP-32 -



GATES MegaTech 1000 (ACR) MEDIUM PRESSUREHIGH TEMPERATURESAE J1402, SAE J1019 & DOT FMVSS 106-74Recommended For: Air brake, pressurised hot oil return lines and rotary oil/air compressor lines. Meets the requirements of DOT FMVSS 106-74, SAE J1402, SAE J1019 performance specifications for high-temperature transmission and lubricating oil systems using petroleum-based oils.Tube: True-bore GTS black tube, specifically compounded for temperature and chemical resistance (CPE - Type J)*Reinforcement: One braid of high-tensile steel wire. Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubber.Temperature Range: Petroleum-base fluids -40°F to +300°F (-40°C to +149°C). Phosphate ester fluids as recommended by the fluid manufacturer, but within a range of -40°F to +212°F (-40°C to +100°C).Couplings: Super-Crimp and Gates Mega-Crimp series.

GATES MegaTech II (ACP) MEDIUM PRESSUREHIGH TEMPERATURESAE 100R2AT & SAE 100R2 Type SRecommended For: Multipurpose medium-pressure, high-temperature, air compressor lines, petroleum-base or phosphate ester hydraulic fluid supplies. Meets or exceeds the requirements of SAE 100R2AT and SAE 100R2 Type S. Tube: Black, oil-resistant, synthetic rubber (CPE - Type J).Reinforcement: Two braids of high-tensile steel wire. Cover: Blue, oil and abrasion-resistant polyester braid.Temperature Range: -40°F to +300°F (-40°C to +149°C).Couplings: Super-Crimp and Gates Mega-Crimp series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings


Mega-CrimpNon-Skive

I.D.in.

O.D.in.



One Piece Series

4MegaTech1000 1/4 0.52 1000 69 4000 276 51 107 S FSP-204 4G-6MegaTech1000 3/8 0.66 1000 69 4000 276 64 107 S FSP-206A 6G-8MegaTech1000 1/2 0.80 1000 69 4000 276 89 107 S FNP-08 8G-

10MegaTech1000 5/8 0.93 1000 69 4000 276 102 91 S FNP-10 10G-12MegaTech1000 3/4 1.04 1000 69 4000 276 122 61 S FNP-12 12G-16MegaTech1000 1 1.34 1000 69 4000 276 152 46 S FNP-16 16G-20MegaTech1000 1-1/4 1.58 1000 69 4000 276 216 31 S FNP-20 20G-

SPECIFICATIONS

Part No.


Min. BurstPressure

Min.BendRad.

Approx. Reel

Length

Couplings


I.D.in.

O.D.in.



20Megatech II 1-1/4 1.89 1700 117 6800 469 381 31 S FNP-2024Megatech II 1-1/2 2.13 1500 103 6000 413 508 31 S FNP-2432Megatech II 2 2.61 1300 89 5200 358 635 31 S FNP-32



GATES Megatech500High-Temp Oil/Return

Recommended For: Air Brake, pressurized hot oil return lines and rotary oil/air compressor lines. Meets the requirements of DOT SAE J1019 performance specifications for high-temperature transmission and lubricating oil systems using petroleum base oils. Not recommended for petrol or diesel applications.Tube: GTS* black tube, specificallycompounded for temperature and chemical resistance (CPE -Type J)Reinforcement: One braid of high-tensile steel wire.Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubberTemperate Range: Petroleum-base fluids -40°F to +300°F(-40°C to + 149°C). Phosphate ester fluids reccommended by the fluid manufacturer, but within range of -40°F 70 + 212°F (-40°C to + 100°C)Couplings: GL Series

GATES C5CFLEET APPLICATIONPOLYESTER BRAID COVERSAE 100R5 & SAE J1402 Type AIIRecommended For: Medium pressure hydraulic petroleum-based oil lines in impulse applications, lube oil, air and water in applications such as air brakes, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), turbocharger oil supplies, tilt cab cylinders, transmission coolant and filtration lines. Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications. DOT FMVSS 106-74 Type - All and SAE J1402 Type All for air brake applications (-4 and-12). Not recommended for gasoline or diesel fuel.Tube: -4 and -5: black, oil and heat resistant synthetic rubber (Neoprene Type A). -6 thru -40 (Nitrile - Type C)Reinforcement: One braid of high tensile carbon steel wire over one braid of polyester. Cover: Black, oil and mildew resistant, polyester braid. Temperature Range: Under SAE 100R5 (hydraulic) conditions -40°F to +212°F (-40°C to +100°C). All-purpose fleet application (hot lube oil lines) -40°F to +300°F (-40°C to +149°C). Air to +160°F (+71°C) only. For water emulsions etc. Avoid continuous use at maximum temperature concurrent with maximum working pressure.Couplings: Super-Crimp and C5 Field-Fit series.

Part No.


Min. BurstPressure

Min.BendRad.

Approx. Reel

LengthCouplings

I.D.in.

O.D.in.

psi bar psi bar mm m GL Series

24Megatech500 1-1/2 1.95 500 34 2000 138 381 31 24GL-32Megatech500 2 2.48 500 34 2000 138 457 31 32GL-40Megatech500 2-1/2 2.97 500 34 2000 138 559 31 40GL-48Megatech500 3 3.5 500 34 2000 138 609 31 48GL-

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Approx Reel

Length

Couplings


Field-Fit/C5Field Attachable

I.D.in.

O.D.in.



CompleteCoupling Series

4C5C 3/16 0.52 3000 207 12000 828 76 - 134 S FSP-204 4C5-5C5C 1/4 0.58 3000 207 12000 828 86 - 117 S FSP-204 5C5-6C5C 5/16 0.67 2250 155 9000 621 102 - 117 S FSP-206A 6C5-8C5C 13/32 0.77 2000 138 8000 552 117 - 100 S FNP-06 8C5-

10C5C 1/2 0.92 1750 121 7000 483 140 - 83 S FSP-210 10C5-12C5C 5/8 1.08 1500 103 6000 414 165 - 67 S FNP-12 12C5-16C5C 7/8 1.23 800 55 3200 221 188 - 50 - - 16C5-20C5C 1 1/8 1.50 625 43 2500 172 229 30 - - - 20C5-24C5C 1 3/8 1.75 500 35 2000 138 267 30 - - - 24C5-32C5C 1 13/16 2.22 350 24 1400 97 338 30 - - - 32C5-40C5C 2 3/8 2.88 350 24 1400 97 610 30 - - - -



GATES C5EFLEET APPLICATIONPOLYESTER BRAID COVERSAE J1019 & SAE J1402 Type AI (-4 to -12)Recommended For: Air brake hose, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), fuel filter, engine and transmission coolant lines, and hot (+300°F) lube oil lines. Tube: Black, oil and heat resistant, synthetic rubber. (Nitrile - Type C). Reinforcement: One braid of high-tensile steel wire over one braid of polyester. Cover: Black, oil and heat resistant, textile braid impregnated with synthetic rubber. Green stripe for easy identification. Temperature Range: -40°F to +300°F (-40°C to +149°C). Air +250°F (+121°C) maximum only.Couplings: Super-Crimp and Field-Fit C5E series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx Carton Length

Approx Reel

Length

Couplings


Field-Fit/C5EField Attachable

I.D.in.

O.D.in.



Complete Coupling Series

4C5E 3/16 0.49 1500 103 6000 414 20 122 134 - - 4C5E-5C5E 1/4 0.55 1500 103 6000 414 25 106 117 S FSP-204 5C5E-6C5E 5/16 0.61 1500 103 6000 414 33 68 117 S FNP-05 6C5E-8C5E 13/32 0.73 1250 86 5000 345 46 145 100 S FNP-06 8C5E-

10C5E 1/2 0.83 1250 86 5000 345 58 100 83 S FSP-208 10C5E-12C5E 5/8 0.95 750 52 3000 207 71 61 67 S FNP-10 12C5E-16C5E 7/8 1.20 400 28 1600 110 89 83 50 - - 16C5E-20C5E 1 1/8 1.49 300 21 1250 86 114 30 - - - 20C5E-



GATES G3H MEDIUM PRESSURESAE-100R3 Recommended For: Hydraulic oil lines, anti-freeze solutions or water. Meets or exceeds requirements of SAE 100R3. Tube: Black, synthetic rubber (Nitrile - Type C). Reinforcement: Two fibre braids. Cover: Black, oil and abrasion resistant, synthetic rubber (Neoprene - Type A).Temperature Range: For hydraulic oil lines -40°F to 275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% of operating time). Couplings: Super-Crimp series.

SPECIFICATIONS

Part No.

Hose Size VacuumWorkingPressure

Min. BurstPressure

Min. BendRad.


Couplings

Super-CrimpSkive

I.D.in.

O.D.in.

Ins. Hg psi bar psi bar mm mSkive

LengthSkive

DiameterStem


4G3H 1/4 0.56 28 1250 86 5000 345 76 139 19mm 13.7mm S FSP-2046G3H 3/8 0.75 28 1125 78 4500 310 102 91 19mm 17.5mm S FSP-206A8G3H 1/2 0.94 28 1000 69 4000 276 127 68 22mm 22.8mm S FSP-210

12G3H 3/4 1.25 28 750 52 3000 207 152 49 40mm 30.5mm S FSP-41216G3H 1 1.50 20 565 39 2250 155 203 30 38mm 36.8mm S FSP-21620C3H 1 1/4 1.75 15 375 26 1500 103 254 24 Non-Skive Non-Skive S FSP-220



GATES TH8 THERMOPLASTICSAE 100R8Recommended For: Use with petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction equipment. TH8 hoses meet or exceed performance requirements of SAE 100R8 with significantly tighter bend radius. Multiline available.Tube: 100% seamless Nylon Type Z. Easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol.Reinforcement: Two polyester braids. Cover: Black urethane resists hydraulic fluids, high temperatures, aging and weather. Black cover is perforated for use in general hydraulic and pneumatic service.Temperature Range: -65°F to +200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of 158°F (+70°C) for water, water/oil emulsions and water glycol.Couplings: Gates Mega-Crimp series.

GATES TH8NC THERMOPLASTIC - NON-CONDUCTIVESAE 100R8Recommended For: Use with petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction equipment. TH8 hoses meet or exceed performance requirements of SAE 100R8 with significantly tighter bend radius. Multilineavailable.Tube: 100% seamless Nylon Type Z. Easily handles a broad range of hydraulic fluids, including phosphate esters andwater glycol.Reinforcement: Two polyester braids. Cover: Orange urethane resists hydraulic fluids, high temperatures, aging and weather. Orange cover is non-perforat-ed for applications requiring electrical non-conductivity. Meets SAE 100R8 Electrical Conductivity test.Temperature Range: -65°F to +200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maxi-mum of 158°F (+70°C) for water, water/oil emulsions and water glycol.Couplings: Gates Mega-Crimp series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Couplings

Mega-CrimpNon-Skive

I.D.in.

O.D.in.


4TH8 1/4 0.63 5000 345 20000 1379 51 76 4G-6TH8 3/8 0.77 4000 276 16000 1103 64 76 6G-8TH8 1/2 0.89 3500 241 14000 966 102 76 8G-

12TH8 3/4 1.14 2250 155 9000 621 165 61 12G-

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Couplings

Mega-CrimpNon-Skive

I.D.in.

O.D.in.


4TH8NC 1/4 0.63 5000 345 20000 1379 51 76 4G-6TH8NC 3/8 0.77 4000 276 16000 1103 64 76 6G-8TH8NC 1/2 0.89 3500 241 14000 966 102 76 8G-



GATES TH7 THERMOPLASTICSAE 100R7Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH7 hose meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius.Tube: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol.Reinforcement: Synthetic Fibre.Cover: Black polyurethane that resists hydraulic fluids, high temperatures, aging and weathering. Black TH7 is perforated for use in general hydraulic and pneumatic service.Temperature Range: -65°F to 200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp series and Gates Mega-Crimp series.

SPECIFICATIONS(Black cover)

Part No.


Min. BurstPressure

Min. BendRadius


Couplings


Mega-CrimpNon-Skive

I.D.in.

O.D.in.


No.One Piece

Series

2TH7 1/8 0.34 3000 172 12000 690 13 76 - - 2PCTS3TH7 3/16 0.43 3000 207 12000 828 20 76 - - 3PCTS4TH7 1/4 0.51 2750 190 11000 759 33 76 S FSP-204 4G-5TH7 5/16 0.60 2500 172 10000 690 46 76 - - 5G-6TH7 3/8 0.66 2250 155 9000 621 51 76 S FSP-206A 6G-8TH7 1/2 0.82 2000 138 8000 552 76 76 S FSP-208 8G-

12TH7 3/4 1.07 1250 86 5000 345 127 76 - - 12G-16TH7 1 1.47 1000 69 4000 276 254 76 - - 16G-



GATES TH7NC THERMOPLASTIC - NON-CONDUCTIVESAE 100R7Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. Orange colour TH7NC meets SAE 100R7 non-conductivity requirements. TH7NC hose meets or exceeds performance requirements of SAE 100R7 with significant tighter bend radius.Tube: -2, -12 and -16: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol. -3 through -8 Polyester.Reinforcement: Synthetic fibre.Cover: Orange urethane that resists hydraulic fluids, high temperatures, aging and weathering. Orange TH7NC is non-perforated for applications requiring electrical non-conductivity. Meets SAE 100R7 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kV/Ft for five minutes.Temperature Range: -65°F to 200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series.

SPECIFICATIONS(Orange Cover)

Part No.


Min. BurstPressure

Min. Bend

Radius


Couplings

Super CrimpNon-Skive

Mega-CrimpNon-Skive

I.D.in.

O.D.in.


No.One Piece

Series

2TH7NC 1/8 0.32 2500 172 10000 690 13 76 - - 2PCTS3TH7NC 3/16 0.44 3000 207 12000 828 20 76 - - 3PCTS4TH7NC 1/4 0.51 2750 190 11000 759 33 76 S FSP-204 4G-6TH7NC 3/8 0.66 2250 155 9000 621 51 76 S FSP-206A 6G-8TH7NC 1/2 0.82 2000 138 8000 552 76 76 S FSP-208 8G-

12TH7NC 3/4 1.07 1250 86 5000 345 127 61 12G-16TH7NC 1 1.47 1000 69 4000 276 254 61 - - 16G-



GATES TH7DL THERMOPLASTICSAE 100R7Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. TH7DL hoses meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius.Tube: 100% seamless nylon- Type Z that easily handles a broad range of hydraulic fluids, including phosphate esters and water glycol.Reinforcement: Synthetic fibre. Cover: Black urethane that resists hydraulic fluids, high temperatures, aging and weathering. Black TH7DL is perfotated for use in general hydraulic and pneumatic service.Temperature Range: -65°F to 200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series.


Part No.


Min. BurstPressure

Min. Bend

Radius


Couplings


Mega-CrimpNon-Skive

I.D.in.

O.D.in.


No.One Piece

Series

4TH7DL 1/4 0.48 2750 190 11000 759 33 76 S FSP-204 4G-5TH7DL 5/16 0.60 2500 172 10000 690 46 76 - - 5G-6TH7DL 3/8 0.63 2250 155 9000 621 51 76 S FSP-206A 6G-8TH7DL 1/2 0.82 2000 138 8000 552 76 76 S FSP-208 8G-



GATES TH7NCDL THERMOPLASTICSAE 100R7Recommended For: Petroleum, water base and synthetic hydraulic fluids. Applications include: power and telephone mobile equipment (cherry pickers), lubrication lines, blowout preventer control lines, hydraulic lifts and farm and construction machinery. Orange colour TH7NCDL meets SAE 100R7 non-conductivity requirements. TH7NCDL hoses meets or exceed performance requirements of SAE 100R7 with significantly tighter bend radius.Tube: PolyesterReinforcement: Braided synthetic fibre. Cover: Orange urethane that resists hydraulic fluids, high temperatures, aging and weathering. Orange TH7NCDL is non-perforated for applications requiring electrical non-conductivity-. Meets SAE 100R7 Electrical Conductivity Test. Maximum leakage shall not exceed 50 microamperes when subjected to 75 kV/Ft. for five minutes. (Orange is industry accepted colour for non-conductive hose.) Temperature Range: -65°F to 200°F (-54°C to +93°C) continuous service for petroleum and synthetic oils. Maximum of +158°F (+70°C) for water, water/oil emulsions and water glycol. Couplings: Super-Crimp and Gates Mega-Crimp series.

SPECIFICATIONS(Orange cover)

Part No.


Min. BurstPressure

Min. BendRad.


Couplings


Mega-CrimpNon-Skive

I.D.in.

O.D.in.


SeriesFerrule Part No.

One Piece Series

4TH7NCDL 1/4 0.48 2750 190 11000 759 33 76 S FSP-204 4G-6TH7NCDL 3/8 0.63 2250 155 9000 621 51 76 S FSP-206A 6G-8TH7NCDL 1/2 0.82 2000 138 8000 552 76 76 S FSP-208 8G-



GATES GMV MegaVac®

LOW PRESSURE(SAE 100R4)Recommended For: Petroleum and water-base hydraulic fluids in suction lines or in low pressure return lines. Meets or exceeds requirements of SAE 100R4. Uses half the bend radius of SAE100R4.Meets flame resistance acceptance designation “MSHA 2GTube: Black, synthetic nitrile rubber is specifically designed for resistance to high temperatures. (Nitrile - Type C)Reinforcement: Double spiral textile (braid for -12 -16 -20) reinforced with a helical spiral-wire to prevent collapse. Cover: Black synthetic rubber is oil and abrasion resistant. (Neoprene - Type A)Temperature Range: -40°F to +275°F (-40°C to +135°C) constant and +300°F (+149°C) intermittent (up to 10% ofoperating time). Couplings: Super-Crimp, Clamp-On, Gates Mega-Crimp and GL series.

HOZEFLEX

LOW PRESSUREOIL DELIVERY AND SUCTIONRecommended For: The transfer of oils and petroleum-based products with aromatic content below 50%. Also suitable on hydraulic systems such as hydraulic oil return lines.Tube: Black Nitrile RubberReinforcement: High tensile textile cords, steel wire helix.Cover: Black, oil and weather resistant chloroprene rubberTemperature Range: -20°C to +70°C). Couplings: Field-Fit Clamp-On series.

SPECIFICATIONS

Part No.

Hose SizeVacuu

mWorkingPressure

Min. BurstPressure

Min. BendRad.


Couplings

Super-Crimp

Vacu-Crimp

Clamp-OnNon-Skive

I.D.in.

O.D.in.

Ins. Hg psi bar psi bar mm m Ferrule One PieceSuper Clamp

Part No.T-Bolt Clamp

Part No.

12GMV 3/4 1.22 25 350 24 1,400 69 64 30 FSS-12 - SP21-34 323016GMV 1 1.45 25 300 20 1200 55 76 30 FSP-216 - SP34-37 323620GMV 1 1/4 1.76 25 250 17 1000 52 102 30 FSP-220 - SP43-47 324424GMV 1 1/2 2.01 25 162 11 650 45 127 30 FSP-424 - SP47-51 325032GMV 2 2.51 25 112 8 450 31 152 30 FSP-432 - SP63-68 326236GMV 2 1/4 2.76 25 88 6 350 24 178 30 - GL SP68-73 326840GMV 2 1/2 3.02 25 68 5 275 19 178 30 - GL SP73-79 327448GMV 3 3.51 25 62 4 250 17 229 30 - GL SP85-91 328656GMV 3 1/2 4.01 25 56 3.8 225 16 254 30 - GL SP97-104 329864GMV 4 4.51 25 56 3.8 225 16 305 30 - GL SP112-121 -

SPECIFICATIONS

Part No.



Couplings

Clamp-OnClamp Non-Skive

I.D.in.

O.D.in.

psi bar m Stem SeriesSuper Clamp

Part No.T-Bolt Clamp Part

No.

RS41-19 3/4 1.14 150 10 20 Clamp-On SP29-31 3229RS41-22 7/8 1.30 150 10 20 Clamp-On SP-31-34 3232RS41-25 1 1.38 150 10 20 Clamp-On SP34-37 3232RS41-32 1 1/4 1.65 150 10 20 Clamp-On SP40-43 3240RS41-38 1 1/2 1.93 150 10 20 Clamp-On SP47-51 3248RS41-51 2 2.44 150 10 20 Clamp-On SP59-63 3260RS41-64 2 1/2 2.99 150 10 20 Clamp-On SP73-79 3274RS41-76 3 3.50 150 10 20 Clamp-On SP85-91 3286



GATES RLA LOW PRESSURE(SAE 30R2)Recommended For: Low-pressure hydraulics oil return lines for general purpose water, glycol antifreeze solutions, converying diesel fuel, gasoline or air. Meets 30R2 performance requirements for both Type 1 and Type 2.Tube: Black, synthetic rubber, oil resistant (Nitrile - Type C)Reinforcement: One fibre braid (-3 to -10). Spiral braid (-12 to -16)Cover: Black synthetic rubber. Oil and abrasion resistant. (Modified Nitrile - Type C)Temperature Range: -40°F to +212°F (-40°C to +100°C). Air to +160°F (+71°C) only.Couplings: Super-Crimp and Gates Mega-Crimp series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Couplings


Mega-CrimpNon-Skive

I.D.in.

O.D.in.

Ins. Hg psi bar psi bar mm mStem


One Piece Series

3RLA 3/16 0.41 28 250 17 1000 39 76 168 P FSP-203 -4RLA 1/4 0.50 28 250 17 1000 39 76 168 S FSP-204 4G-5RLA 5/16 0.56 28 250 17 1000 39 102 168 P FSP-205 5G-6RLA 3/8 0.66 28 250 17 1000 39 102 168 S FSP-206A 6G-8RLA 1/2 0.81 20 200 14 800 55 127 168 S FSP-208 8G-

10RLA 5/8 0.94 15 200 14 800 55 152 168 S FSP-212 10G-12RLA 3/4 1.09 10 200 14 800 55 152 168 S FSP-412 12G-16RLA 1 1.34 10 160 6 640 44 203 91 S FSP-416 16G-



GATES LOL+LOW PRESSURERecommended For: Petroleum-base hydraulic oils, water, glycol antifreeze solutions, engine lubricating oils, and air. Lock-On hose and couplings are NOT recommended for pressure surge applications or critical applications such as permanent piping in residential or commercial buildings. Do not use for gasoline or diesel fuels, unless approved by Gates H/C Product Application.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil-resistant synthetic rubber highly resistant to oil and heat (Nitrile - Type C).Reinforcement: One fibre braid.Cover: Oil- and abrasion-resistant synthetic rubber (Modified Nitrile- Type C). Available in black-Neoprene (LOLA), blue (LOLB), green (LOLG), red (LOLR), yellow (LOLY) and grey (LOLC) colours.Temperature Range: -40°F to +212°F (-40°C to +100°C). For air: 160°F (+71°C) only.Couplings: Field-Fit Lock-On series.

GATES LOCLOW PRESSURERecommended For: Petroleum-base hydraulic oils, glycol anti-freeze compounds, water, hot lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications such as permanent piping in residential or commercial buildings. Tube: Black, oil-resistant synthetic rubber (Nitrile - Type C). Reinforcement: One fibre braid. Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubber. Temperature Range: -40°F to +212°F (-40°C to +100°C). For air: -40°F to +160°F (-40°C to +71°C). Couplings: Field-Fit Lock-On series

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Approx. Reel

Length

Couplings

Lock-OnNon-Skive

I.D.in.

O.D.in.

in. Hg psi bar psi bar mm mOne Piece

Series

3LOLA+ 3/16 0.41 28 300 21 1200 83 76 91 L4LOLA+ 1/4 0.47 28 300 21 1200 83 76 91 L5LOLA+ 5/16 0.55 28 300 21 1200 83 76 91 L6LOLA+ 3/8 0.63 28 300 21 1200 83 76 91 L6LOLB+ 3/8 0.63 28 300 21 1200 83 76 91 L6LOLR+ 3/8 0.63 28 300 21 1200 83 76 91 L6LOLY+ 3/8 0.63 28 300 21 1200 83 76 91 L8LOLA+ 1/2 0.77 28 300 21 1200 83 127 91 L8LOLB+ 1/2 0.77 28 300 21 1200 83 127 91 L

10LOLA+ 5/8 0.94 28 300 21 1200 83 152 75 L10LOLB+ 5/8 0.94 28 300 21 1200 83 152 75 L12LOLA+ 3/4 1.06 15 300 21 1200 83 178 68 L12LOLB+ 3/4 1.06 15 300 21 1200 83 178 68 L

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Couplings

Lock-OnNon-Skive

I.D.in.

O.D.in.

psi bar psi bar mm mOne Piece

Series

4LOC 1/4 0.52 300 21 1000 69 76 175 L6LOC 3/8 0.64 300 21 1000 69 76 183 L8LOC 1/2 0.80 300 21 1000 69 127 102 L

10LOC 5/8 0.90 300 21 1000 69 152 79 L12LOC 3/4 1.00 300 21 1000 69 178 67 L



GATES POLAR SEALSAE J51 Type D, SAE J2064 Type C, class IIRecommended For: Liquid and gaseous R134a and R12 refrigerants in automotive air conditioning and industrial systems; i.e., tractors construction trucks, mobile and stationary refrigeration units. Designed to minimize permeation of R134a refrigerant.Tube: Black synthetic rubber (Chloroprene- Type A).Barrier: Nylon liner.Reinforcement: Two layers of spiral polyester.Cover: Black synthetic rubber (EPDM).Temperature Range: -22°F to +257°F (-30°C to +125°C).Couplings: Gates PolarSeal series.

GATES POWER CLEAN ™1 & 2 WIRE BRAID HOSERecommended For: For use on hot or cold water, high pressure cleaning equipment NOTE: Not recommended for steam service.Tube: Synthetic rubber specifically compounded to handle high pressure water service.Reinforcement: High tensile steel 1 & 2 wire braid.Cover: Specifically compounded to handle high pressure washer environment.Temperature Range:-40°F to +250°F (-40°C to +121°C)Increased operating temperature will reduce hose assembly service life.Couplings: Super-Crimp and Gates Mega-Crimp series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

SuctionApprox. Carton Length

Couplings

Polar CrimpNon-Skive

I.D.in.

O.D.in.

psi bar psi bar mm in Hg m One Piece Series

6AC134A 5/16 .75 500 34 2000 138 51 24 103 6ACA-8AC134A 13/32 .91 500 34 2000 138 76 24 71 8ACA-

10AC134A 1/2 1.00 500 34 2000 138 102 24 64 10ACA-12AC134A 5/8 1.13 500 34 2000 138 127 24 53 12ACA-

SPECIFICATIONS

Part No.

Hose Size BraidingWorkingPressure

Min. BendRad.

Couplings


I.D.in.

O.D.in.

psi bar mm Stem SeriesFerrulePart No

4PC3500-BLACK 1/4 0.53 1 wire 3500 241 101 S FNP-044PC6000-BLACK 1/4 0.59 2 wire 6000 414 101 S FNP-046PC3000-BLACK 3/8 0.68 1 wire 3000 207 127 S FNP-066PC3000-BLUE 3/8 0.68 1 wire 3000 207 127 S FNP-06

6PC5000-BLACK 3/8 0.74 2 wire 5000 345 127 S FNP-066PC5000-BLUE 3/8 0.74 2 wire 5000 345 127 S FNP-06



GATES C5MMARINE FUEL LINE HOSE 1 WIRE BRAID HOSESAE J1527 Type A Class 1 and SAE J1942Recommended For: On-shore/off-shore and marine diesel fuel and gasoline applications and hot oil lines up to 212°F. Meets marine fuel specifications SAE J1527 Type A Class 1 and SAE J1942 applications. Exceeds performance requirements of SAE J30RZ for non-marine applications.Tube: Nitrile - Type CReinforcement: One wire braid. Cover: Modified Nitrile - Type C Blue.Temperature Range: -4°F to +212°F (-20°C to +100°C).Couplings: Field-Fit C5 series.

GATES C5DFUEL LINE HOSE 1 WIRE BRAID HOSESAE J1402 Type All and SAE J1019Recommended For: Petroleum-base or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline and turbocharger oil supplies. Tilt cab cylinder and air brakes. C5D (-4 to -12) meets or exceeds DOT FMVSS 106-74 Type All, SAE J1402 Type All and SAE J1019 and fuel resistence of SAE J30R2.Tube: Black, oil and heat resistent, synthetic rubber (CPE - Type J)Reinforcement: One braid of high tensile steel wire over one braid of polyester. Cover: Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber.Temperature Range: -40°F to +300°F (-40°C to +149°C), air to +250°F (+121°C) only, maximum phosphate esters to +212°F (+100°C) only.Couplings: Field-Fit C5 series.

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Couplings


I.D.in.

O.D.in.

psi bar psi bar mm mComplete

Coupling Series

5C5M 1/4 .58 500 34 2000 138 25 106 5C5-6C5M 5/16 .67 500 34 2000 138 32 106 6C5-8C5M 13/32 .77 500 34 2000 138 44 91 8C5-

10C5M 1/2 .92 500 34 2000 138 69 76 10C5-12C5M 5/8 1.08 500 34 2000 138 57 60 12C5-

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.


Couplings


I.D.in.

O.D.in.

psi bar psi bar mm mComplete

Coupling Series

4C5D 3/16 0.52 1500 103 6000 414 25 134 4C5-5C5D 1/4 0.58 1500 103 6000 414 25 106 5C5-6C5D 5/16 0.67 1500 103 6000 414 32 106 6C5-8C5D 13/32 0.77 1250 86 5000 345 44 91 8C5-

10C5D 1/2 0.92 1250 86 5000 345 69 76 10C5-12C5D 5/8 1.08 750 52 3000 207 57 60 12C5-16C5D 7/8 1.23 400 28 1600 110 89 45 15C5-



GATES SAFETY STRIPE® IIFuel Lines/PCV/Evaporative Emission Control HoseSAE 30R6 & 30R7

Recommended For: Multi-purpose hose for use on fuel lines, PVC and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol, methanol and ethers (up to the legal limit allowed by EPA)Tube: Nitrile Rubber*Reinforcement: Reinforced construction.Cover: Oil resistant cover resists the effects of high heat and ozone found in engine compartments. Warning: Do not use for pressure lines on fuel injected engines or for cooling systems applications. (Use MPI Hose).

4219 Fuel Line & Tank Vent HoseFuel Lines/Tank VentEmission Control HoseSAE 30R6 & 30R7

Recommended For: Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. NOTE: Not recommended for fuel injection systems.Tube: Nitrile - Type C.*Reinforcement: Single ply of synthetic fibreCover: Type C2 (NBR/PVC). Black. Fuel, oil, ozone and high temperature resistant.Temperature Range: -40°F to +257°F (-40°C to +125°C).

SPECIFICATIONS

Part No.


SuctionApprox.

Carton Length

I.D.in.

I.D.mm.

psi bar In Hg mm Hg m

27001 3/16 4.8 50 3.4 24 609 7.627002 1/4 6.3 50 3.4 24 609 7.627003 5/16 8.0 50 3.4 24 609 7.627004 3/8 9.5 50 3.4 24 609 7.627006 1/2 12.7 35 2.4 10 254 7.6

SPECIFICATIONS

Part No.


SuctionApprox.

Carton Length

I.D.in.

I.D.mm.

psi bar In Hg mm Hg m

4219-0103 1/4 6.3 50 3.4 24 609 1984219-0107 5/16 7.9 50 3.4 24 609 1984219-0109 3/8 9.5 50 3.4 24 609 1984219-0102 1/2 12.7 35 2.4 10 254 182



GATES PS-188POWER STEERING HOSESAE J2050Recommended For: Power steering pressure lines. Designed to meet requirements of SAE J2050 specifications.Tube: Synthetic rubber specially compunded to provide resistance to high tem-peratures and power steering fluid (Hypalon - Type M)Reinforcement: Two high-strength nylon braids that resist high temperaturesand allow for expansion for system noise dampening.Cover: Black, synthetic rubber developed specifically to resist under hood environment (Hypalon)Temperature: -40°F to +300°F (-40°C to +150°C)Couplings: Super-Crimp

Windshield Washer (27042)SAE J1037

Recommended For: Ideal for windshield washers and vacuum-operated accessories.Tube: Type P (EPDM). Black. Heat resistant.Reinforcement: Non-reinforced.Cover: Uncovered.Temperature Range: -40°F to +257°F (-40°C to +125°C).Meets: SAE J1037, J942b


Part No.


Min. BurstPressure

Min. BendRadius

Couplings


I.D.in.

O.D.in.

psi bar psi bar mm Stem SeriesFerrule Part

No.

6PS-188 3/8 0.71 1500 132 6000 419 83 S FSP-206A

SPECIFICATIONS

Part No.

Hose Size Suction Working PressureApprox. Carton

Length

I.D.in.

Nipple Sizein.

In Hg mm Hg bar m

27041 7/64 1/8 24 610 1.72 15.227042 5/32 3/16 24 610 1.72 15.227043 7/32 1/4 24 610 1.72 15.227044 1/4 5/16 24 610 1.72 15.227050 5/16 3/8 24 610 1.72 7.627053 3/8 7/16 24 610 1.72 7.6



GATES TERMINATOR AIR & MULTI-PURPOSERecommended For: Applications requiring a tough hose with a rugged cover for outstanding abrasion resistance and extended service life where constant flexing and bending is required. This top-of-the-line premium oil resistant hose is designed for applications involving air, oil, and water as well as grease sprays, paraffin waxes, salt solutions and a variety of chemicals. It offers excellent durability for extra long life in mining, air drill, construction, poulry plants, abattoirs, quarries, shipyards, food processing, railroads and other severe service enviroments. It is non-conductive at 1000 volts DCTube: Black. (Nitrile - Type C).Reinforcement: Synthetic, high tensile textile cord. Cover: Yellow (Carboxylated Nitrile - Type C4). Temperature Range: -40°F to +212°F (-40°C to +100°C).

GATES PREMO FLEXAIR & MULTI-PURPOSE

Recommended For: Applications requiring a premium-grade hose with excellent flexibility and maximum resistance to air, water, petroleum oils, gasoline, kerosene and fuel oil (to 120°F/49°C) and lubricating oils (to 212°F/100°C). Excellent weather and ozone resistance. It is non-conductive to 1000 volts DC.Tube: Black. (Nitrile - Type C).Reinforcement: Synthetic, high tensile textile cord. Cover: Red (Modified Nitrile - Type C2). Temperature Range: -40°F to +212°F (-40°C to +100°C).

SPECIFICATIONS

Part No.


SuctionMin. Bend

Radius


I.D.in.

O.D.in.

psi bar In Hg mm Hg mm m

04TERMINATOR 1/4 0.57 501 34.5 30 762 76 18306TERMINATOR 3/8 0.75 501 34.5 25 635 76 18308TERMINATOR 1/2 0.89 501 34.5 25 635 127 18212TERMINATOR 3/4 1.22 501 34.5 15 381 152 12216TERMINATOR 1 1.51 501 34.5 10 254 203 107

SPECIFICATIONS

Part No.


SuctionMin. Bend

Radius


I.D.in.

O.D.in.

psi bar In Hg mm Hg mm m

4PREMO 1/4 0.50 250 17.2 30 762 51 1835PREMO 5/16 0.56 250 17.2 30 762 51 1836PREMO 3/8 0.66 250 17.2 30 762 76 1838PREMO 1/2 0.85 250 17.2 25 635 102 183

10PREMO 5/8 0.98 315 21.7 20 508 127 18312PREMO 3/4 1.15 250 17.2 20 508 127 18316PREMO 1 1.47 250 17.2 10 254 203 10020PREMO 1 1/4 1.75 250 17.2 10 254 254 9124PREMO 1 1/2 2.00 250 17.2 10 254 305 76



AFX TEFLON HOSESmooth Bore Heavy Wall Imperial rangeMeets or exceeds SAE 100R14 working pressure(Dimensionally not the same as SAE 100R14)

Recommended For: Hydraulic oil lines, Turbo chargers, Steam, Canning sealant lines, Plastic/Rubber moulding presses, Compressor discharge, Fuel lines, Paint spray, for other applications contact Southcott Pty Ltd.Tube: Teflon*(PTFE) hose core is manufactured from premier quality resin, smooth bore heavy wall. No pigments or additives are incorporated thus giving the hose liner a translucent appearance free from any contamination.Cover/Reinforcement: Stainless steel wire braid produced from AISI 304/S15 or BS970-1 1996 quality hard drawn tensile stainless steel wire. Temperature Range: -60°C to +260°CCouplings: Child: Super-Crimp

Warning: PTFE has a very high electrical isolation value, a damaging electrostatic charge can build up inside the hose when electrically resistive fluids/gases are being transmitted at high velocity. Review the potential for electrostatic discharge for every application. If in doubt contact your Southcott agent.

SAE 100R14 working pressures are rated for dynamic applications.Maximum working pressures will vary depending on operating temperature and impulse frequency

* Dupont Registered TM

GATES RFSUS MSHA 2GRecommended For: Low-pressure powder fire suppressant applications in mining, forestry and fire fighting equipment. The red cover is for easy visual identification in these applications.Meets flame resistance acceptance designation “MSHA 2GTube: Black, oil resistant synthetic rubber (Nitrile - Type C). Reinforcement: One braid of high-tensile steel wire.Cover: Red, oil and abrasion resistant (Modified Nitrile - Type C)Temperature Range: -40°C to +100°CCouplings: Super-Crimp and Gates Mega-Crimp

SPECIFICATIONS

Part No.

Hose SizeMax. SAE 100R14Working Pressure

Max. Static Working Pressure

Min. Static Burst Pressure

Min. BendRad.

Couplings

Crimp Non-Skive

I.D.in.

O.D.in.

psi bar psi bar psi bar mmStem


AFX2004 1/4 0.384 1500 103 2500 172 10000 689 76 S FNT-04AFX2006 3/8 0.485 1500 103 2000 138 8000 552 127 S FNT-06AFX2008 1/2 0.620 800 55 1750 120 7000 483 140 S FNT-08AFX2010 5/8 0.755 800 55 1250 86 5000 345 165 S FNT-10AFX2012 3/4 0.900 800 55 1125 77 4500 310 203 S FNT-12AFX2016 1 1.170 800 55 875 60 3500 241 305 S FNT-16

SPECIFICATIONS

Part No.


Min. BurstPressure

Min. BendRad.

Couplings

Super-Crimp“S” Stems

Mega-CrimpNon-Skive

I.D.in.

O.D.Max in.

psi bar psi bar mm FerruleOne Piece

Series

4RFS 1/4 0.45 2750 190 11000 758 101.6 FNP-04 4G-6RFS 3/8 0.68 2250 155 9000 621 127 FNP-06 6G-8RFS 1/2 0.80 2000 138 8000 551 177.8 FNP-08 8G-

12RFS 3/4 1.09 1250 86 5000 344 241.3 FNP-12 12G-



HSG WIRE SPRING GUARD

HOSE STRAPS & BUNCH BINDERS

Suitable for securing several hoses together

Part Number“A”(In.)

(±.015)

“G”(In.)

“P”(In.)

HSG-01 0.550 14(.080) 7/32

HSG-02 0.676 14(.080) 7/32

HSG-03 0.738 14(.080) 7/32

HSG-04 0.852 14(.080) 7/32

HSG-05 0.915 14(.080) 7/32

HSG-06 0.977 14(.080) 7/32

HSG-07 1.040 14(.080) 7/32

HSG-08 1.122 14(.080) 7/32

HSG-09 1.278 11(.120) 11/32

HSG-10 1.340 11(.120) 11/32

HSG-11 1.578 11(.120) 11/32

HSG-12 1.625 11(.120) 11/32

HSG-13 1.847 11(.120) 13/32

HSG-14 2.112 11(.120) 13/32

HSG-15 2.312 11(.120) 13/32

HSG-15A 2.690 11(.120) 13/32

HSG-16 2.937 11 (.120 13/32

Part No.Length

Type Descriptionmm.

BS001 400 Non FRAS Rated Hose Strap




AB001 400 FRAS Rated Hose Strap



BUNCH-SS N/A FRAS Rated Bunch Binder in Stainless Steel



HPSG FLAT PLASTIC GUARD

Temperature Range: -40°C to 121°C

Economical, lightweight plastic sleeving protects hose from water, air, gasoline, oil and hydraulic fluids.Can be used to bundle several hoses together

SPIRAL GUARD™ SGXFLAT PLASTIC SPIRALGUARDSGX Standard: Available in black,blue, yellow and redSGXFRAS Flame Retardant Anti Static: compliance to ISO6805

Part NumberCoil I.D.

(A)(In.)

Strip Width(B)(In.)

Thickness(In.)

ContinuousLength Pkg

(m)

HPSG-04 1/4 1/4 0.040 30

HPSG-06 3/8 1/4 0.040 30

HPSG-08 1/2 3/8 0.070 30

HPSG-10 5/8 3/8 0.070 15

HPSG-12 3/4 3/8 0.070 15

HPSG-16 1 5/8 0.115 15

HPSG-22 1 3/8 5/8 0.115 7.5

HPSG-30 1 7/8 5/8 0.115 7.5

SPECIFICATIONS

Part Number

1-Wire 2-WireMulti Spiral

HoseO.D. Range

mm

HoseO.D. Range in

Coil LengthmStandard

Flame Resistant Anti-Static

SGX12 SGX12FRAS -4 -4 - 8 - 12 1/4 - 3/8 50 m

SGX16 SGX16FRAS -4 -4 - 12 - 17 1/2 - 5/8 20 m

SGX20 SGX20FRAS -6 -6 -6 16 - 22 5/8 - 7/8 20 m

SGX25 SGX25FRAS -8 -8 -8 22 - 28 7/8 - 1 1/16 20 m

SGX32 SGX32FRAS -12 -10 -12 27 - 33 1 1/16 - 1 1/4 20 m

SGX40 SGX40FRAS -16 -16 -16 33 - 42 1 1/4 - 1 5/8 20 m

SGX50 SGX50FRAS -20 -20 -20 42 - 55 1 5/8 - 2 1/8 20 m

SGX63 SGX63FRAS 32 -24 -24 52 - 65 2 - 2 1/2 20 m

SGX75 SGX75FRAS - -32 -32 65 - 80 2 1/2 - 3 1/4 10/20 m

SGX90 SGX90FRAS Hose looms 80mm - 150mm diameter 3 - 6 10/20 m

SGX110 SGX110FRAS Hose looms 150mm - and above 6 plus 6/10 m

SGX125 SGX125FRAS - - - - 6 m



HNG NYLON PROTECTIVE SLEEVE

Gates Nylon Sleeves perform a dual role:They provide excellent abrasive resistance to protect individual hoses.They can be used to bundle several hose assemblies together for maximum protection.Downtime and maintenance costs are reduced.Nylon Sleeves are unique because they form an extra protective layer against abrasive forces.Construction: Thousands of tiny Nylon filaments,woven into the texturized yarn, “friz” providing a self-renewing shield that is extremely resistant to severe abrasion.Note: Do not use Nylon Sleeve where ambient temperature exceeds 120°C.

LIFEGUARD HOSE BURST NYLON PROTECTIVE SLEEVEMEETS MDG41 REQUIREMENTS

The LifeGuard line-of-sight sleeving system is an effective, economical alternative to costly metal shielding or re-routing of hose lines, and does not affect system performance. With an inner layer of tightly woven filament nylon and an outer layer of textured nylon that also resists abrasion, it meets ISO3457 and MSHA flame-resistance requirements.

SPECIFICATIONS

Part No.Inside Flat A Sleeve I.D. B

Colourins. mm ins.

HNG-14 1.42 36.1 0.90 Black

HNG-16 1.67 42.4 1.06 Black

HNG-20 1.92 48.8 1.22 Black

HNG-24 2.24 56.6 1.42 Black

HNG-28 2.85 72.4 1.81 Black

HNG-32 3.44 87.4 2.19 Black

HNG-38 3.74 95.0 2.38 Black

HNG-42 4.12 104.6 2.62 Black

HNG-46 4.53 115.1 2.88 Black

Part NumberHose Size Contains Hose Bursts Clamps To Suit

inch mm Aluminium Stainless Steel

14LG3K 1/4 6.3

Pin Hole up to 3000 psiBurst up to 6000 psi

6SC4 6SC4SS

16LG3K 3/8 9.5 6SC4 6SC4SS

20LG3K 1/2 12.5 8SC4 8SC4SS

22LG3K 5/8 15.9 10SC4 10SC4SS

26LG3K 3/4 19.1 12SC4 12SC4SS

32LG3K 1 25.4 16SC4 16SC4SS

14LG5K 1/4 6.3

Pin Hole up yo 5000 psiBurst up to10000 psi

6SC4 6SC4SS

16LG5K 3/8 9.5 6SC4 6SC4SS

20LG5K 1/2 12.5 8SC4 8SC4SS

22LG5K 5/8 15.9 10SC4 10SC4SS

26LG5K 3/4 19.1 12SC4 12SC4SS

0

B

0 0.09" ± 0.02"

0 A ±0.12



TEXSLEEVE HOSE BURST NYLON PROTECTIVE SLEEVE

HBR BEND RESTRICTOR

Flexible Hose Bend Restrictors protect the hose near the coupling.Gates tapered PVC sleeves reduce bending stresses in the hose near the coupling to prevent damage, such as in power wash applications. Installed during the assembly, this smoothly-finished product withstands temperatures from - 40°C to +93°C and is available in nine sizes.

Features: Benefits:Tapered Design:Reduces bending stress near the hose-coupling junction, so extra long, more trouble free hose life can be expected.Smooth Finish:Will not scratch finish on equipment being washed.Attractive appearance enhances look of quality.Wide Temperature Range:Helps give extra long service life for both hot and cold power wash assemblies.Friction Fit:No adhesive or clamps required to hold bend restrictor in place on hose assembly. Saves assembly cost.

Part No. Flat I.D. (mm) Round Diam. (mm)Suits G1 & G2 with ‘S’ series fittings

TEXS17 27 17

TEXS20 31 20 3/16” (-03)

TEXS23 36 23 1/4” (-04)

TEXS25 39 25 5/16” (-05)

TEXS27 42 27 3/8” (-06)

TEXS31 49 31 1/2” (-08)

TEXS33 52 33 5/8” (-10)

TEXS36 54 36

TEXS40 63 40

TEXS44 69 44 3/4” (12)

TEXS47 74 47 1” (-16)

TEXS53 83 53

TEXS55 86 55

TEXS60 94 60 1-1/4” (-20)

TEXS66 104 66

TEXS73 115 73 1-1/2” (-24)

TEXS85 134 85

TEXS93 146 93 2” (-32)

TEXS112 176 112

TEXS127 202 127

Part No.I.D. L

ColourHose Size

& Typeins. mm ins. mm

HBR-1050 0.63 16.0 5.5 140 Black4G1, 4G1H, 4G2,

4M3K, 4M2T, 4PCI, 4PCII

HBR-1051 0.73 18.5 6.0 152 Black4C2A, 6G1, 6G1H,

6M3K, 6M2T, 6C7S, 6PCI, 6WM

HBR-1054 0.77 19.5 7.0 178 Black 6C1A, 6G2, 6PCII

HBR-1052 0.84 21.3 7.0 178 Black6C2A, 8G1, 8G1H,

8PCII

HBR-1053 1.00 25.4 8.0 203 Black8C1A, 8C2A, 10G1,

10G1H,10M2T

0 I.D.

1 L

MEETS MDG41 REQUIREMENTS

TEXSLEEVE is a continuous nylon fibre treatedwith a special process to eliminate air from be-tween the fibres. This process gives the product asuper compact textile wire making it far betterthan any other standard fibre sleeve on the market.The Department of Primary Industries requires thistype of protection for hydraulic hoses where thereis potential for harm to personnel or the environ-ment in the event of a hose failure.

TEXSLEEVE also has excellent abrasion and fireresistance capabilities making it the top of the linechoice in hose protection.

Note: TEXSLEEVE can be fitted clamped or un-clamped. For best performance it is recommendedthat shrink-band clamps be used to secure thesleeve over the crimped hose ferrule. See page 5.28



HeatGuard Silicon Fire Jacket

HeatGuard is a completely non-asbestos, heat resistant, protective sleeving. Its special silicone coating can also withstand a broad range of solvents and fuels. It goes on easily over most hoses and couplings, with only hose clamps or wire ties required for fastening.

Best of all, HeatGuard can pay for itself in reduced replacement and maintenance costs.

HeatGuard is knitted, coated fibreglass; meets SAE AS1072A specification Temperature range: -54°C to +260°C for continuous exposure.

Part No. I.D. (In) Part No. I.D. (In) Part No. I.D. (In)

HTG-4 1/4 HTG-16 1 HTG-40 2-1/2

HTG-5 0.31 HTG-18 1.12 HTG-42 2.62

HTG-6 3/8 HTG-20 1-1/4 HTG-44 2-3/4

HTG-7 0.44 HTG-22 1.38 HTG-46 2.88

HTG-8 1/2 HTG-24 1-1/2 HTG-48 3

HTG-9 0.56 HTG-26 1.62 HTG-50 3.12

HTG-10 0.62 HTG-28 1-3/4 HTG-52 3-1/4

HTG-11 0.69 HTG-30 1.88 HTG-56 3-1/2

HTG-12 3/4 HTG-32 2 HTG-60 3-3/4

HTG-13 0.81 HTG-34 2.12 HTG-64 4

HTG-14 0.88 HTG-36 2-1/4

HTG-15 15/16 HTG-38 2.38

DashSize

C5C C5D C5M

C5E G1 G2 M3KM2T

M4K M5KM6K

C12MG4K

C12 G3K

G5K G6K

GMVC14

C14NC

2 HTG-12 HTG-12

4 HTG-12 HTG-12 HTG-12 HTG-14 HTG-12 HTG-12 HTG-8

5 HTG-14 HTG-14 HTG-14 HTG-14 HTG-10

6 HTG-16 HTG-16 HTG-16 HTG-14 HTG-16 HTG-16 HTG-16 HTG-12

8 HTG-16 HTG-16 HTG-18 HTG-18 HTG-16 HTG-16 HTG-18 HTG-18 HTG-14

10 HTG-18 HTG-18 HTG-18 HTG-18 HTG-18 HTG-18 HTG-22 HTG-14

12 HTG-22 HTG-18 HTG-22 HTG-22 HTG-22 HTG-22 HTG-24 HTG-24 HTG-24 HTG-16

16 HTG-24 HTG-24 HTG-26 HTG-28 HTG-28 HTG-26 HTG-28 HTG-28 HTG-28 HTG-20

20 HTG-28 HTG-28 HTG-32 HTG-34 HTG-32 HTG-32 HTG-32

24 HTG-32 HTG-36 HTG-38 HTG-38 HTG-40 HTG-36

32 HTG-38 HTG-44 HTG-48 HTG-44 HTG-48 HTG-44

36 HTG-50 HTG-48

40 HTG-52

48 HTG-60

The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited. 2.1

Section 2Field-Fit Couplings

Contents

Part No. ................. Description...........................................................................................................................Page

FIELD-FIT COUPLINGSTo suit Gates hose types:G1, G2, C1A, C2A, C3H

BN1 ....................... Body to suit G1 Hose (Non-Skive) ......................................................................................2.4BN2 ....................... Body to suit G2 Hose (Non-Skive) ......................................................................................2.4BN3 ....................... Body to suit C3H Hose (Non-Skive) ...................................................................................2.4BS1........................ Body to suit C1A Hose (Skive)............................................................................................2.4BS2........................ Body to suit C2A Hose (Skive)............................................................................................2.4

RMB...................... Straight Male BSPT .............................................................................................................2.4RMP ...................... Straight Male BSPP .............................................................................................................2.4RMBX................... Straight Male BSPT.Swivel .................................................................................................2.4RMBX90C ............ 90° Close Male BSPT.Swivel ..............................................................................................2.4

RFB....................... Straight Female BSPP.Swivel..............................................................................................2.5RFB45 ................... 45° Tube Style Female BSPP.Swivel ..................................................................................2.5RFB45C ................ 45° Close Style Female BSPP.Swivel..................................................................................2.5RFB90 ................... 90° Tube Style Female BSPP.Swivel ..................................................................................2.5RFB90C ................ 90° Close Style Female BSPP.Swivel..................................................................................2.5

RMJ....................... Straight Male JIC .................................................................................................................2.5RFJ ........................ Straight Female JIC Swivel..................................................................................................2.5RFJ45 .................... 45° Tube Style Female JIC Swivel ......................................................................................2.6RFJ45C ................. 45° Close Style Female JIC Swivel .....................................................................................2.6RFJ90 .................... 90° Tube Style Female JIC Swivel ......................................................................................2.6RFJ90L.................. 90° Long Drop Tube Style Female JIC Swivel....................................................................2.6RFJ90C ................. 90° Tube Style Female JIC Swivel ......................................................................................2.6

RFFO..................... Flat Female Swivel O-Ring Flat Face..................................................................................2.6RFFO90................. 90° Female Swivel O-Ring Flat Face ..................................................................................2.6

RMN ..................... Straight Male NPTF .............................................................................................................2.6RFN....................... Straight Female NPTF .........................................................................................................2.6RMO ..................... Straight Male S.A.E. ‘O’ Ring Boss ....................................................................................2.7RMOX................... Straight Male S.A.E. ‘O’ Ring Boss Swivel ........................................................................2.7RMOX90C............ 90° Close Male S.A.E. ‘O’ Ring Boss Swivel .....................................................................2.7

RFL ....................... Straight SAE ‘O’ Ring Flange (Code 61) ............................................................................2.7RFL45 ................... 45° SAE ‘O’ Ring Flange (Code 61) ...................................................................................2.7RFL90 ................... 90° SAE ‘O’ Ring Flange (Code 61) ...................................................................................2.7

RMS ...................... Straight Male SAE ...............................................................................................................2.7RFS ....................... Straight Female SAE.Swivel................................................................................................2.7RFS45C................. 45° Tube Style Female SAE.Swivel ....................................................................................2.7RFS90 ................... 90° Tube Style Female SAE.Swivel ....................................................................................2.7RFS90C................. 90° Close Style Female SAE Swivel ...................................................................................2.7

RLS ....................... Lifesaver...............................................................................................................................2.8RHJ ....................... Hose Joiner...........................................................................................................................2.8

2.2 The Child brand product is proudly manufactured in Australia by Southcott Pty. Limited.

Contents

Part No. ................. Description .......................................................................................................................... Page


FIELD-FIT/C5 COUPLINGSTo suit Gates hose types:C5C, C5D & C5M

5MB .......................Straight Male BSPT. ............................................................................................................2.9C5-RMP.................Straight Male NPTF.............................................................................................................2.9C5-RFJX ................Straight Female JIC Swivel .................................................................................................2.9C5-RFJX45 ............45° Tube Style Female JIC Swivel ......................................................................................2.9C5-RFJX90 ............90° Tube Style Female JIC Swivel ......................................................................................2.9C5-RFJSX .............Straight Female JIC/SAE (Dual Cone Seat) Swivel ............................................................2.9C5-RFJSX45..........45° Tube Style Female JIC/SAE (Dual Cone Seat) Swivel.................................................2.9C5-RFJSX90..........90° Tube Style Female JIC/SAE (Dual Cone Seat) Swivel.................................................2.9C5-RFSX ...............Straight Female SAE Swivel ...............................................................................................2.10C5-RFSX45 ...........45° Tube Style Female SAE Swivel ....................................................................................2.10C5-RFSX90 ...........90° Tube Style Female SAE Swivel ....................................................................................2.10

FIELD-FIT/C5E COUPLINGSTo suit Gates hose types:C5E - SAE J1402 Type E.A1.(Air brake) SAE J1019 High Temp

C5E-RMP ..............Straight Male NPTF.............................................................................................................2.11C5E-RFJX..............Straight Female JIC Swivel .................................................................................................2.11C5E-RFJX45..........45° Tube Style Female JIC Swivel ......................................................................................2.11C5E-RFJX90..........90° Tube Style Female JIC Swivel ......................................................................................2.11C5E-RFJSX ...........Straight Female JIC/SAE (Dual Cone Seat) Swivel ............................................................2.11C5E-RFJSX45 .......45° Tube Style Female JIC/SAE (Dual Cone Seat) Swivel.................................................2.11C5E-RFJSX90 .......90° Tube Style Female JIC/SAE (Dual Cone Seat) Swivel.................................................2.11C5E-RFSX.............Straight Female SAE. Swivel ..............................................................................................2.12C5E-RFSX45.........45° Tube Style Female SAE Swivel ....................................................................................2.12C5E-RFSX90.........90° Tube Style Female SAE Swivel ....................................................................................2.12C5E-RMIX ............Straight Male SAE Inverted Flare .......................................................................................2.12C5E-RMIX45 ........45° Male SAE Inverted Flare...............................................................................................2.12C5E-RMIX90 ........90° Male SAE Inverted Flare...............................................................................................2.12

LOCK-ON COUPLINGS

LMB.......................Straight Male BSP.T ............................................................................................................2.13LFB ........................Straight Female BSP.P. Swivel............................................................................................2.13LFB90C .................90° Close Style Female BSP.P Swivel ................................................................................2.13LMN ......................Straight Male NPTF.............................................................................................................2.13LMJ........................Straight Male JIC .................................................................................................................2.13LMS .......................Straight Male SAE ...............................................................................................................2.13LFJ .........................Straight Female JIC Swivel .................................................................................................2.13LFJS.......................Straight Female JIC/SAE (Dual Cone Seat) Swivel ............................................................2.13LFJ90 .....................90° Tube Style Female JIC Swivel ......................................................................................2.14LFJ90C ..................90° Close Style Female JIC Swivel .....................................................................................2.14LFS ........................Straight Female SAE Swivel ...............................................................................................2.14LMIX .....................Straight Male SAE Inverted Flare .......................................................................................2.14LSP ........................Straight Stand Pipe...............................................................................................................2.14LHJ ........................Straight Hose Joiner.............................................................................................................2.14



Contents


CLAMP-ON COUPLINGS

CB4 ....................... Hosetail Male/Male BSPT x LP...........................................................................................2.15CP4........................ Hosetail Male/Male BSPP x LP...........................................................................................2.15CM4 ...................... Hosetail Male/Male Metric x LP .........................................................................................2.15CN4 ....................... Hosetail Male/Male NPTF x LP ..........................................................................................2.15C5.......................... Hosetail Male/Male SAE O-Ring Boss x LP.......................................................................2.15

CB5 ....................... Hosetail Female/Male BSPT x LP .......................................................................................2.16

C41........................ Hosetail 45° Elbow Male/Male SAE O-Ring Boss x LP.....................................................2.16CB41 ..................... Hosetail 45° Elbow Male/Male BSPT x LP.........................................................................2.16CN41 ..................... Hosetail 45° Elbow Male/Male NPTF x LP ........................................................................2.16

C60........................ Hosetail 90° Elbow Male/Male SAE O-Ring Boss x LP.....................................................2.16CB60 ..................... Hosetail 90° Elbow Male/Male BSPT x LP.........................................................................2.16CP60...................... Hosetail 90° Elbow Male/Male BSPP x LP.........................................................................2.17CN60 ..................... Hosetail 90° Elbow Male/Male NPTF x LP ........................................................................2.17

2.4 *Manufactured To Order - Minimum Order Quantities May Apply


Body N/Skive 100R1ATOne Wire Braid

G1 HoseNon-Skive

P/Number................... ...................HoseBN1-04 ...................... ......................1/4BN1-06 ...................... ......................3/8BN1-08 ...................... ......................1/2BN1-12 ...................... ......................3/4BN1-16 ...................... .........................1

Body N/Skive 100R2ATTwo Wire Braid

G2 HoseNon-Skive

P/Number................... ...................HoseBN2-04 ...................... ......................1/4BN2-06 ...................... ......................3/8BN2-08 ...................... ......................1/2BN2-10 ...................... ......................5/8BN2-12 ...................... ......................3/4BN2-16 ...................... .........................1

Body N/Skive 100R3Two Textile Braid

C3H HoseNon-Skive

P/Number................... ...................HoseBN3-04 ...................... ......................1/4BN3-06 ...................... ......................3/8BN3-08 ...................... ......................1/2BN3-12 ...................... ......................3/4

Body Skive 100R1AOne Wire Braid

C1A HoseSkive

P/Number................... ...................HoseBS1-04 ....................... ......................1/4BS1-06 ....................... ......................3/8BS1-08 ....................... ......................1/2BS1-12 ....................... ......................3/4BS1-16 ....................... .........................1

Body Skive 100R2ATwo Wire Braid

C2A HoseSkive

P/Number................... ...................HoseBS2-04 ....................... ......................1/4BS2-06 ....................... ......................3/8BS2-08 ....................... ......................1/2BS2-12 ....................... ......................3/4BS2-16 ....................... .........................1

Straight Male BSPTG1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRMB-0204 ................. 1/8 ................1/4RMB-0404 ................. 1/4 ................1/4RMB-0406 ................. 1/4 ................3/8RMB-0604 ................. 3/8 ................1/4RMB-0606 ................. 3/8 ................3/8RMB-0608 ................. 3/8 ................1/2RMB-0806 ................. 1/2 ................3/8RMB-0808 ................. 1/2 ................1/2RMB-0810 ................. 1/2 ................5/8RMB-0812 ................. 1/2 ................3/4RMB-1008 ................. 5/8 ................1/2RMB-1208 ................. 3/4 ................1/2RMB-1212 ................. 3/4 ................3/4RMB-1612 ................. 1....................3/4RMB-1616 ................. 1.......................1

Straight Male BSPPG1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRMP-0606..................3/8 ................ 3/8RMP-0806..................1/2 ................ 3/8RMP-0808..................1/2 ................ 1/2

Straight Male BSPTSwivel

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRMBX-0606...............3/8 ................ 3/8RMBX-0608...............3/8 ................ 1/2RMBX-0806...............1/2 ................ 3/8RMBX-0808...............1/2 ................ 1/2

* RMBX-1208...............3/4 ................ 1/2RMBX-1212...............3/4 ................ 3/4

90 Close Male BSPTSwivel

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRMBX90C-0606........3/8 ................ 3/8

* RMBX90C-0608........3/8 ................ 1/2RMBX90C-0806........1/2 ................ 3/8RMBX90C-0808........1/2 ................ 1/2RMBX90C-1212........3/4 ................ 3/4

*Manufactured To Order - Minimum Order Quantities May Apply 2.5


Straight Female BSPPSwivel

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRFB-0204...................1/8 ................ 1/4RFB-0404...................1/4 ................ 1/4RFB-0406...................1/4 ................ 3/8RFB-0604...................3/8 ................ 1/4RFB-0606...................3/8 ................ 3/8RFB-0608...................3/8 ................ 1/2RFB-0806...................1/2 ................ 3/8RFB-0808...................1/2 ................ 1/2RFB-1008...................5/8 ................ 1/2RFB-1208...................3/4 ................ 1/2RFB-1212...................3/4 ................ 3/4RFB-1612...................1 ................... 3/4RFB-1616...................1 ...................... 1

45° Tube Female BSPPSwivel

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRFB45-0404...............1/4 ................ 1/4RFB45-0606...............3/8 ................ 3/8

* RFB45-0806...............1/2 ................ 3/8RFB45-0808...............1/2 ................ 1/2RFB45-1212...............3/4 ................ 3/4RFB45-1616...............1 ...................... 1

45° Close Female BSPPSwivel

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRFB45C-0404 ............1/4 ................ 1/4RFB45C-0606 ............3/8 ................ 3/8RFB45C-0806 ............1/2 ................ 3/8RFB45C-0808 ............1/2 ................ 1/2RFB45C-1212 ............3/4 ................ 3/4RFB45C-1616 ............1 ...................... 1


G1, G2, C1A, C2A, C3H

P/Number....................Thread .......HoseRFB90-0404 ...............1/4 ................1/4RFB90-0606 ...............3/8 ................3/8RFB90-0806 ...............1/2 ................3/8RFB90-0808 ...............1/2 ................1/2RFB90-1212 ...............3/4 ................3/4RFB90-1616 ...............1 ...................... 1


G1, G2, C1A, C2A, C3H

P/Number....................Thread .......Hose* RFB90C-0204 ............1/8 ................1/4

RFB90C-0404 ............1/4 ................1/4RFB90C-0406 ............1/4 ................3/8RFB90C-0604 ............3/8 ................1/4RFB90C-0606 ............3/8 ................3/8RFB90C-0608 ............3/8 ................1/2RFB90C-0806 ............1/2 ................3/8RFB90C-0808 ............1/2 ................1/2RFB90C-1208 ............3/4 ................1/2RFB90C-1212 ............3/4 ................3/4RFB90C-1616 ............1 ...................... 1

Straight Male JICG1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRMJ-0704 .................. 7/16...............1/4RMJ-0804 .................. 1/2.................1/4RMJ-0904 .................. 9/16...............1/4RMJ-0906 .................. 9/16...............3/8RMJ-0908 .................. 9/16...............1/2RMJ-1206 .................. 3/4.................3/8RMJ-1208 .................. 3/4.................1/2RMJ-1406 .................. 7/8.................3/8RMJ-1408 .................. 7/8.................1/2RMJ-1410 .................. 7/8.................5/8RMJ-1412 .................. 7/8.................3/4RMJ-1708 .................. 1-1/16 ...........1/2RMJ-1710 .................. 1-1/16 ...........5/8RMJ-1712 .................. 1-1/16 ...........3/4RMJ-1912 .................. 1-3/16 ...........3/4RMJ-2116 .................. 1-5/16 ..............1

Straight Female JICSwivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRFJ-0704.................... 7/16...............1/4RFJ-0804.................... 1/2.................1/4RFJ-0904.................... 9/16...............1/4RFJ-0906.................... 9/16...............3/8RFJ-0908.................... 9/16...............1/2RFJ-1206.................... 3/4.................3/8RFJ-1208.................... 3/4.................1/2RFJ-1406.................... 7/8.................3/8RFJ-1408.................... 7/8.................1/2RFJ-1410.................... 7/8.................5/8RFJ-1412.................... 7/8.................3/4RFJ-1708.................... 1-1/16 ...........1/2RFJ-1710.................... 1-1/16 ...........5/8RFJ-1712.................... 1-1/16 ...........3/4RFJ-1716.................... 1-1/16 ..............1RFJ-1912.................... 1-3/16 ...........3/4RFJ-2112.................... 1-5/16 ...........3/4RFJ-2116.................... 1-5/16 ..............1



45° Female JICSwivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRFJ45-0704................ 7/16...............1/4

* RFJ45-0804................ 1/2.................1/4RFJ45-0904................ 9/16...............1/4RFJ45-0906................ 9/16...............3/8RFJ45-1206................ 3/4.................3/8RFJ45-1208................ 3/4.................1/2RFJ45-1408................ 7/8.................1/2RFJ45-1712................ 1-1/16 ...........3/4RFJ45-2116................ 1-5/16 ..............1

45° Close Female JICSwivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRFJ45C-0704............. 7/16...............1/4RFJ45C-0804............. 1/2.................1/4RFJ45C-0904............. 9/16...............1/4RFJ45C-0906............. 9/16...............3/8RFJ45C-1206............. 3/4.................3/8RFJ45C-1208............. 3/4.................1/2RFJ45C-1408............. 7/8.................1/2RFJ45C-1712............. 1-1/16 ...........3/4

* RFJ45C-2116............. 1-5/16 ..............1

90° Tube Female JICSwivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRFJ90-0704................ 7/16...............1/4RFJ90-0804................ 1/2.................1/4RFJ90-0904................ 9/16...............1/4RFJ90-0906................ 9/16...............3/8RFJ90-1206................ 3/4.................3/8RFJ90-1208................ 3/4.................1/2RFJ90-1408................ 7/8.................1/2RFJ90-1410................ 7/8.................5/8RFJ90-1708................ 1-1/16 ...........1/2RFJ90-1710................ 1-1/16 ...........5/8RFJ90-1712................ 1-1/16 ...........3/4RFJ90-2116................ 1-5/16 ..............1

90° Female JICLong Drop Swivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRFJ90L-0704 ............. 7/16 ..............1/4RFJ90L-0904 ............. 9/16 ..............1/4RFJ90L-0906 ............. 9/16 ..............3/8RFJ90L-1206 ............. 3/4 ................3/8RFJ90L-1208 ............. 3/4 ................1/2RFJ90L-1408 ............. 7/8 ................1/2RFJ90L-1712 ............. 1-1/16 ...........3/4RFJ90L-2116 ............. 1-1/16 ...........3/4


G1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRFJ90C-0704............. 7/16 ..............1/4RFJ90C-0804............. 1/2 ................1/4RFJ90C-0904............. 9/16 ..............1/4RFJ90C-0906............. 9/16 ..............3/8RFJ90C-0908............. 9/16 ..............1/2RFJ90C-1206............. 3/4 ................3/8RFJ90C-1208............. 3/4 ................1/2RFJ90C-1408............. 7/8 ................1/2RFJ90C-1708............. 7/8 ................1/2RFJ90C-1712............. 1-1/16 ...........3/4RFJ90C-2116............. 1-5/16 ..............1

Straight Female SwivelFlat Faced O-Ring (ORFS)

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRFFO-0904................ 11/16 ............1/4RFFO-1104................ 11/16 ............1/4RFFO-1106................ 11/16 ............3/8RFFO-1308................ 13/16 ............1/2RFFO-1608................ 1....................1/2

90° Female SwivelFlat Faced O-Ring (ORFS)

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRFFO90-0904 ............9/16 .............. 1/4RFFO90-1104 ............11/16 ............ 1/4RFFO90-1106 ............11/16 ............ 3/8RFFO90-1308 ............13/16 ............ 1/2RFFO90-1608 ............1 ................... 1/2

Straight Male NPTFG1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRMN-0404 .................1/4 ................ 1/4RMN-0406 .................1/4 ................ 3/8RMN-0604 .................3/8 ................ 1/4RMN-0606 .................3/8 ................ 3/8RMN-0808 .................1/2 ................ 1/2RMN-1208 .................3/4 ................ 1/2RMN-1212 .................3/4 ................ 3/4

* RMN-1616 .................1 ...................... 1

Straight Female NPTFG1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRFN-0404...................1/4 ................ 1/4RFN-0406...................1/4 ................ 3/8RFN-0808...................1/2 ................ 1/2



Straight Male S.A.E. ‘O’ Ring Boss

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRMO-1206 .................3/4 ................ 3/8RMO-1208 .................3/4 ................ 1/2RMO-1406 .................7/8 ................ 3/8RMO-1408 .................7/8 ................ 1/2

90 Duro O Ring supplied

Straight MaleS.A.E. ‘O’ Ring Boss (Swivel)

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRMOX-1206 ..............3/4 ................ 3/8

* RMOX-1208 ..............3/4 ................ 1/2RMOX-1406 ..............7/8 ................ 3/8RMOX-1408 ..............7/8 ................ 1/2

* RMOX-1708 ..............1-1/16........... 1/2* RMOX-1712 ..............1-1/16........... 3/4

RMOX-2116 ..............1-5/16.............. 190 Duro O Ring supplied

90° Close MaleS.A.E. ‘O’ Ring Boss (Swivel)

G1, G2, C1A, C2A, C3H

P/Number ...................Thread....... HoseRMOX90C-1206........3/4 ................ 3/8RMOX90C-1208........3/4 ................ 1/2

* RMOX90C-1406........7/8 ................ 3/8RMOX90C-1408........7/8 ................ 1/2RMOX90C-1712........1-1/16........... 3/4


Straight SAE‘O’ Ring Flange

G1, G2, C1A, C2A, C3HCode 61

P/Number....................Flange........HoseRFL-1212 ...................3/4 ................3/4

* RFL-1612 ...................1 ...................3/4RFL-1616 ...................1 ...................... 1

* RFL-2416 ...................1-1/2 ................ 190 Duro O Ring supplied

45° SAE ‘O’ Ring FlangeG1, G2, C1A, C2A, C3H

Code 61

P/Number....................Flange........Hose* RFL45-1612 ...............1 ...................3/4* RFL45-2012 ...............1-1/4 .............3/4* RFL45-2016 ...............1-1/4 ................ 190 Duro O Ring supplied

90° SAE ‘O’ Ring FlangeG1, G2, C1A, C2A, C3H

Code 61

P/Number....................Flange........HoseRFL90-1212 ...............3/4 ................3/4


Straight Male SAE G1, G2, C1A, C2A, C3H

P/Number....................Thread .......HoseRMS-0804 ..................1/2 ................1/4

* RMS-1006 ..................5/8 ................3/8RMS-1206 ..................3/4 ................3/8

Straight Female SAESwivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......HoseRFS-0704................... 7/16...............1/4RFS-0806................... 1/2.................3/8RFS-1006................... 5/8.................3/8RFS-1206................... 3/4.................3/8

45° Close Female SAESwivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......Hose* RFS45C-1006 ............ 5/8.................3/8

90° Tube Female SAESwivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......Hose* RFS90-1006............... 5/8.................3/8

90° Close Female SAESwivel

G1, G2, C1A, C2A, C3H

P/Number................... Thread .......Hose* RFS90C-0704 ............ 7/16...............1/4

RFS90C-1006 ............ 5/8.................3/8RFS90C-1206 ............ 3/4.................3/8



LifesaverG1, G2, C1A, C2A, C3H

P/Number................... Tube...........HoseRLS-0404................... 1/4.................1/4

* RLS-0604................... 3/8.................1/4RLS-0606................... 3/8.................3/8

* RLS-0806................... 1/2.................3/8RLS-0808................... 1/2.................1/2RLS-1008................... 5/8.................1/2RLS-1212................... 3/4.................3/4RLS-1616................... 1.......................1

Hose JoinerG1, G2, C1A, C2A, C3H

P/Number................... ...................HoseRHJ-04....................... ......................1/4RHJ-06....................... ......................3/8RHJ-08....................... ......................1/2RHJ-12....................... ......................3/4

* RHJ-16....................... .........................1


Section 2Field-Fit / C5 Couplings

Straight Male BSPTC5C, C5D & C5M Hose

P/Number ...................Thread....... Hose5MB-0204 ..................1/8 .............. 3/165MB-0404 ..................1/4 .............. 3/16

Straight Male NPTFC5C, C5D & C5M Hose

P/Number ...................Thread....... Hose4C5-2RMP .................1/8 .............. 3/164C5-4RMP .................1/4 .............. 3/165C5-4RMP .................1/4 ................ 1/46C5-4RMP .................1/4 .............. 5/166C5-6RMP .................3/8 .............. 5/168C5-8RMP .................1/2 ............ 13/3212C5-12RMP .............3/4 ................ 5/816C5-16RMP .............1 ................... 7/8


C5C, C5D & C5M Hose

P/Number....................Thread .......Hose6C5-6RFJX.................9/16 ............5/168C5-6RFJX.................9/16 ..........13/3210C5-12RFJX.............1-1/16 ...........1/212C5-12RFJX.............1-1/16 ...........5/816C5-16RFJX.............1-5/16 ...........7/820C5-20RFJX.............1-5/8 ..........1-1/824C5-24RFJX.............1-7/8 ..........1-3/832C5-32RFJX.............2-1/2 ......1-13/16


C5C, C5D & C5M Hose

P/Number....................Thread .......Hose6C5-6RFJX45.............9/16 ............5/1612C5-12RFJX45.........1-1/16 ...........5/816C5-16RFJX45.........1-5/16 ...........7/8


C5C, C5D & C5M Hose

P/Number....................Thread .......Hose6C5-6RFJX90.............9/16 ............5/1612C5-12RFJX90.........1-1/16 ...........5/816C5-16RFJX90.........1-5/16 ...........7/8

Straight Female JIC/SAEDual Seat Swivel

C5C, C5D & C5M Hose

P/Number................... Thread .......Hose4C5-4RFJSX.............. 7/16.............3/165C5-5RFJSX.............. 1/2.................1/48C5-8RFJSX.............. 3/4.............13/3210C5-10RFJSX.......... 7/8.................1/2

45° Tube Female JIC/SAEDual Seat Swivel

C5C, C5D & C5M Hose

P/Number................... Thread .......Hose4C5-4RFJSX45.......... 7/16.............3/16

* 5C5-5RFJSX45.......... 1/2.................1/48C5-8RFJSX45.......... 3/4.............13/3210C5-10RFJSX45...... 7/8.................1/2


C5C, C5D & C5M Hose

P/Number................... Thread .......Hose4C5-4RFJSX90.......... 7/16.............3/165C5-5RFJSX90.......... 1/2.................1/48C5-8RFJSX90.......... 3/4.............13/3210C5-10RFJSX90...... 7/8.................1/2


Section 2Field-Fit / C5 Couplings


C5C, C5D & C5M Hose

P/Number................... Thread .......Hose6C5-6RFSX ............... 5/8...............5/1610C5-12RFSX ........... 1-1/16 ...........1/212C5-12RFSX ........... 1-1/16 ...........5/8


C5C, C5D & C5M Hose

P/Number................... Thread .......Hose6C5-6RFSX45 ........... 5/8...............5/1612C5-12RFSX45 ....... 5/8...............5/16


C5C, C5D & C5M Hose

P/Number................... Thread .......Hose6C5-6RFSX90 ........... 5/8...............5/1612C5-12RFSX90 ....... 1-1/16 ...........5/8


Section 2Field-Fit / C5E Couplings

Effective Date 01/12/2008


Straight Male NPTFC5E Hose

P/Number ...................Thread....... Hose4C5E-2RMP...............1/8 .............. 3/164C5E-4RMP...............1/4 .............. 3/165C5E-4RMP...............1/4 ................ 1/46C5E-6RMP...............3/8 .............. 5/168C5E-8RMP...............1/2 ............ 13/3210C5E-8RMP.............1/2 ................ 1/212C5E-12RMP...........3/4 ................ 5/812C5E-16RMP...........1 ................... 5/816C5E-16RMP...........1 ................... 7/8


C5E Hose

P/Number....................Thread .......Hose6C5E-6RFJX ..............9/16 ............5/1612C5E-12RFJX ..........1-1/16 ...........5/816C5E-16RFJX ..........1-5/16 ...........7/8


C5E Hose

P/Number....................Thread .......Hose* 6C5E-6RFJX45 ..........9/16 ............5/16* 12C5E-12RFJX45 ......1-1/16 ...........5/8


C5E Hose

P/Number....................Thread .......Hose6C5E-6RFJX90 ..........9/16 ............5/1612C5E-12RFJX90 ......1-1/16 ...........5/816C5E-16RFJX90 ......1-5/16 ...........7/8

Straight Female JIC/SAEDual Seat Swivel

C5E Hose

P/Number................... Thread .......Hose4C5E-4RFJSX ........... 7/16.............3/165C5E-5RFJSX ........... 1/2.................1/48C5E-8RFJSX ........... 3/4.............13/32


C5E Hose

P/Number................... Thread .......Hose4C5E-4RFJSX45 ....... 7/16.............3/168C5E-8RFJSX45 ....... 3/4.............13/3210C5E-10RFJSX45 ... 7/8.................1/2


C5E Hose

P/Number................... Thread .......Hose4C5E-4RFJSX90 ....... 7/16.............3/168C5E-8RFJSX90 ....... 3/4.............13/3210C5E-10RFJSX90 ... 7/8.................1/2




C5E Hose

P/Number................... Thread .......Hose6C5E-6RFSX............. 5/8...............5/16


C5E Hose

P/Number................... Thread .......Hose6C5E-6RFSX45......... 5/8...............5/16


C5E Hose

P/Number................... Thread .......Hose6C5E-6RFSX90......... 5/8...............5/16

Straight Male SAEInverted Flare

C5E Hose

P/Number................... Thread .......Hose4C5E-4RMIX ............ 7/16 ............3/165C5E-5RMIX ............ 1/2 ................1/46C5E-6RMIX ............ 5/8 ..............5/168C5E-8RMIX ............ 3/4 ............13/32

45° Tube Male SAEInverted Flare

C5E Hose

P/Number................... Thread .......Hose6C5E-6RMIX45 ........ 5/8 ..............5/168C5E-8RMIX45 ........ 3/4 ............13/32


C5E Hose

P/Number................... Thread .......Hose4C5E-4RMIX90 ........ 7/16 ............3/165C5E-5RMIX90 ........ 1/2 ................1/46C5E-6RMIX90 ........ 5/8 ..............5/168C5E-8RMIX90 ........ 3/4 ............13/32


Section 2Lock-On Couplings

Straight Male BSPTLOL/LOC Hose

P/Number ...................Thread....... HoseLMB-0204..................1/8 ................ 1/4LMB-0205..................1/8 .............. 5/16LMB-0404..................1/4 ................ 1/4LMB-0405..................1/4 .............. 5/16LMB-0406..................1/4 ................ 3/8LMB-0604..................3/8 ................ 1/4LMB-0606..................3/8 ................ 3/8LMB-0608..................3/8 ................ 1/2LMB-0806..................1/2 ................ 3/8LMB-0808..................1/2 ................ 1/2LMB-1212..................3/4 ................ 3/4


LOL/LOC Hose

P/Number ...................Thread....... HoseLFB-0204 ...................1/8 ................ 1/4LFB-0404 ...................1/4 ................ 1/4LFB-0405 ...................1/4 .............. 5/16LFB-0604 ...................3/8 ................ 1/4LFB-0606 ...................3/8 ................ 3/8LFB-0608 ...................3/8 ................ 1/2LFB-0806 ...................1/2 ................ 3/8LFB-0808 ...................1/2 ................ 1/2LFB-0810 ...................1/2 ................ 5/8LFB-1212 ...................3/4 ................ 3/4

90° Female BSPPSwivel

LOL/LOC Hose

P/Number....................Thread .......HoseLFB90C-0404.............1/4 ................1/4LFB90C-0405.............1/4 ..............5/16

* LFB90C-0604.............3/8 ................1/4LFB90C-0606.............3/8 ................3/8LFB90C-0808.............1/2 ................1/2LFB90C-1212.............3/4 ................3/4

Straight Male NPTFLOL/LOC Hose

P/Number....................Thread .......HoseLMN-0204..................1/8 ................1/4LMN-0205..................1/8 ..............5/16

* LMN-0404..................1/4 ................1/4* LMN-0406..................1/4 ................3/8* LMN-0606..................3/8 ................3/8* LMN-0808..................1/2 ................1/2

Straight Male JICLOL/LOC Hose

P/Number....................Thread .......HoseLMJ-0704 ...................7/16 ..............1/4LMJ-0804 ...................1/2 ................1/4LMJ-0904 ...................9/16 ..............1/4

* LMJ-0906 ...................9/16 ..............3/8* LMJ-1206 ...................3/4 ................3/8* LMJ-1208 ...................3/4 ................1/2* LMJ-1408 ...................7/8 ................1/2* LMJ-1410 ...................7/8 ................5/8* LMJ-1712 ...................1-1/16 ...........3/4

Straight Male SAELOL/LOC Hose

P/Number................... Thread .......HoseLMS-0704.................. 7/16...............1/4LMS-0806.................. 1/2.................3/8

Straight Female JICLOL/LOC Hose

P/Number................... Thread .......HoseLFJ-0904.................... 9/16...............1/4LFJ-0906.................... 9/16...............3/8LFJ-1212.................... 3/4.................3/4LFJ-1712.................... 1-1/16 ...........3/4

Straight Female JIC/SAEDual Seat SwivelLOL/LOC Hose

P/Number................... Thread .......HoseLFJS-0704.................. 7/16...............1/4LFJS-0804.................. 1/2.................1/4LFJS-0805.................. 1/2...............5/16LFJS-1206.................. 3/4.................3/8LFJS-1208.................. 3/4.................1/2LFJS-1408.................. 7/8.................1/2LFJS-1410.................. 7/8.................5/8


Section 2Lock-On Couplings


LOL/LOC Hose

P/Number................... Thread .......HoseLFJ90-0906................ 9/16...............3/8LFJ90-1206................ 3/4.................3/8LFJ90-1208................ 3/4.................1/2LFJ90-1408................ 7/8.................1/2LFJ90-1712................ 1-1/16 ...........3/4


LOL/LOC Hose

P/Number................... Thread .......HoseLFJ90C-0704 ............. 7/16...............1/4LFJ90C-0904 ............. 9/16...............1/4LFJ90C-0906 ............. 9/16...............3/8LFJ90C-1206 ............. 3/4.................3/8LFJ90C-1208 ............. 3/4.................1/2LFJ90C-1712 ............. 1-1/16 ...........3/4

Straight Female SAELOL/LOC Hose

P/Number................... Hose...........HoseLFS-1006 ................... 5/8.................3/8


LOL/LOC Hose

P/Number................... Thread .......HoseLMIX-0704................ 7/16 ..............1/4

* LMIX-0804................ 1/2 ................1/4LMIX-1006................ 5/8 ................3/8

Standpipe LOL/LOC Hose

P/Number................... Hose ..........Hose* LSP-0404 ................... 1/4 ................1/4

LSP-0504 ................... 5/16 ..............1/4* LSP-0606 ................... 3/8 ................3/8* LSP-0808 ................... 1/2 ................1/2

LSP-15M08 ............... 15mm ...........1/2

Hose JoinerLOL/LOC Hose

P/Number................... Hose ..........HoseLHJ-0404 ................... 1/4 ................1/4LHJ-0505 ................... 5/16 ............5/16LHJ-0606 ................... 3/8 ................3/8LHJ-0806 ................... 1/2 ................3/8LHJ-0808 ................... 1/2 ................1/2LHJ-1010 ................... 5/8 ................5/8LHJ-1212 ................... 3/4 ................3/4


Section 2Clamp-On Suction Hose Tails

Clamp-on Hosetail M/MBSPT x Tail

P/Number ............... Thread .......... HoseCB4-0404 ............... 1/4.................... 1/4CB4-0406 ............... 1/4.................... 3/8CB4-0408 ............... 1/4.................... 1/2CB4-0604 ............... 3/8.................... 1/4CB4-0606 ............... 3/8.................... 3/8CB4-0608 ............... 3/8.................... 1/2CB4-0610 ............... 3/8.................... 5/8CB4-0806 ............... 1/2.................... 3/8CB4-0808 ............... 1/2.................... 1/2CB4-0810 ............... 1/2................... 5/8CB4-0812 ............... 1/2.................... 3/4CB4-0816 ............... 1/2....................... 1CB4-1212 ............... 3/4.................... 3/4CB4-1216 ............... 3/4....................... 1CB4-1220 ............... 3/4.................1-1/4CB4-1612 ............... 1....................... 3/4CB4-1616 ............... 1.......................... 1CB4-1620 ............... 1....................1-1/4CB4-1624 ............... 1....................1-1/2CB4-2016 ............... 1-1/4 ................... 1CB4-2020 ............... 1-1/4 .............1-1/4CB4-2024 ............... 1-1/4 .............1-1/2CB4-2420 ............... 1-1/2 .............1-1/4CB4-2424 ............... 1-1/2 .............1-1/2CB4-2432 ............... 1-1/2 ................... 2CB4-3232 ............... 2.......................... 2

* CB4-3240 ............... 2....................2-1/2* CB4-4040 ............... 2-1/2 .............2-1/2

Clamp-on Hosetail M/MBSPP x Tail

P/Number................Thread...........HoseCP4-0612................ 3/8 ....................3/4CP4-0812................ 1/2 ....................3/4CP4-0816................ 1/2 ....................... 1CP4-0820................ 1/2 .................1-1/4CP4-1212................ 3/4 ....................3/4CP4-1216................ 3/4 ....................... 1CP4-1220................ 3/4 .................1-1/4CP4-1224................ 3/4 .................1-1/2CP4-1616................ 1 .......................... 1CP4-1620................ 1 ....................1-1/4CP4-1624................ 1 ....................1-1/2CP4-2016................ 1-1/4.................... 1CP4-2020................ 1-1/4..............1-1/4CP4-2024................ 1-1/4..............1-1/2CP4-2424................ 1-1/2..............1-1/2CP4-2032................ 1-1/4.................... 2CP4-2432................ 1-1/2.................... 2CP4-3232................ 2 .......................... 2

Clamp-on Hosetail M/MMetric x Tail

P/Number................Thread...........HoseCM4-3316 ..............M33 .................... 1CM4-3324 ..............M33 ..............1-1/2

Clamp-on Hosetail M/MNPTF x Tail

P/Number................Thread ...........HoseCN4-0404 ...............1/4 ....................1/4CN4-0406 ...............1/4 ....................3/8CN4-0606 ...............3/8 ....................3/8CN4-0608 ...............3/8 ....................1/2CN4-0610 ...............3/8 ....................5/8

* CN4-0808 ...............1/2 ....................1/2CN4-0810 ...............1/2 ................... 5/8CN4-1212 ...............3/4 ....................3/4CN4-1216 ...............3/4 .......................1CN4-1616 ...............1 ..........................1CN4-1620 ...............1 ................... 1-1/4CN4-1624 ...............1 ................... 1-1/2CN4-1626 ...............1 ................... 1-5/8CN4-2020 ...............1-1/4............. 1-1/4CN4-2024 ...............1-1/4............. 1-1/2CN4-2416 ...............1-1/2....................1CN4-2420 ...............1-1/2............. 1-1/4CN4-2424 ...............1-1/2............. 1-1/2CN4-2432 ...............1-1/2....................2CN4-3232 ...............2 ......................... 2

Clamp-on Hosetail M/MS.A.E. ‘O’ Ring Boss x Tail

P/Number................Thread ...........HoseC5-1208 ..................3/4 ....................1/2C5-1212 ..................3/4 ................... 3/4C5-1408 ..................7/8 ....................1/2C5-1412 ..................7/8 ................... 3/4C5-1420 ..................7/8 ................ 1-1/4

* C5-1712 ..................1-1/16...............3/4C5-1716 ..................1-1/16..................1C5-1720 ..................1-1/16........... 1-1/4

* C5-2112 ..................1-5/16.............. 3/4C5-2116 ..................1-5/16..................1C5-2120 ..................1-5/16........... 1-1/4C5-2124 ..................1-5/16........... 1-1/2C5-2620 ..................1-5/8............. 1-1/4C5-2624 ..................1-5/8............. 1-1/2C5-3024 ..................1-7/8............. 1-1/2



Clamp-on Hosetail F/MBSPP x Tail

P/Number................Thread ...........HoseCB5-1212................3/4 ....................3/4CB5-1616................1 ..........................1CB5-2020................1-1/4............. 1-1/4

Clamp-on Hosetail45° Elbow. M/M

S.A.E. ‘O’ Ring Boss x Tail

P/Number................Thread ...........HoseC41-1212 ................3/4 ....................3/4

* C41-1408 ................7/8 ....................1/2C41-1716 ................1-1/16 ..................1

* C41-2116 ................1-5/16 ..................1* C41-2120 ................1-5/16 ........... 1-1/4* C41-2124 ................1-5/16 ........... 1-1/2* C41-2620 ................1-5/8 ............. 1-1/4* C41-2624 ................1-5/8 ............. 1-1/2


BSPT x Tail

P/Number................Thread ...........HoseCB41-0808..............1/2 ....................1/2CB41-1212..............3/4 ....................3/4CB41-1216..............3/4 .......................1CB41-1616..............1 ..........................1CB41-1620..............1 ................... 1-1/4CB41-2020..............1-1/4............. 1-1/4CB41-2024..............1-1/4............. 1-1/2


NPTF x Tail

P/Number................Thread...........Hose* CN41-0608 .............1/2 ....................3/4* CN41-0812 .............1/2 ....................3/4

CN41-1212 .............3/4 ....................3/4CN41-1216 .............3/4 .......................1CN41-1220 .............3/4 ................ 1-1/4CN41-1616 .............1 ..........................1CN41-1620 .............1 ................... 1-1/4

* CN41-2020 .............1-1/4............. 1-1/4

Clamp-on Hosetail90° Elbow M/M

S.A.E. ‘O’ Ring Boss x Tail

P/Number................Thread...........Hose* C60-0905 ................9/16 ................5/16* C60-0908 ................9/16 ..................1/2

C60-1208 ................3/4 ....................1/2C60-1210 ................3/4 ....................5/8C60-1212 ................3/4 ....................3/4C60-1412 ................7/8 ...................3/4

* C60-1416 ................7/8 .......................1C60-1420 ................7/8 ................ 1-1/4

* C60-1710 ................1-1/16...............5/8C60-1712 ................1-1/16 ..............3/4C60-1716 ................1-1/16 .................1C60-1720 ................1-1/16 .......... 1-1/4C60-2112 ................1-5/16...............3/4C60-2116 ................1-5/16..................1C60-2120 ................1-5/16........... 1-1/4C60-2124 ................1-5/16........... 1-1/2C60-2620 ................1-5/8............. 1-1/4C60-2624 ................1-5/8............. 1-1/2C60-3024 ................1-7/8............. 1-1/2


BSPT x Tail

P/Number ............... Thread .......... HoseCB60-0204 ............. 1/8.................... 1/4CB60-0405 ............. 1/4.................. 5/16CB60-0406 ............. 1/4.................... 3/8

* CB60-0608 ............. 3/8.................... 1/2CB60-0610 ............. 3/8.................... 5/8CB60-0612 ............. 3/8.................... 3/4CB60-0806 ............. 1/2.................... 3/8CB60-0808 ............. 1/2.................... 1/2CB60-0812 ............. 1/2.................... 3/4CB60-1212 ............. 3/4.................... 3/4CB60-1216 ............. 3/4....................... 1CB60-1220 ............. 3/4.................1-1/4CB60-1612 ............. 1....................... 3/4CB60-1616 ............. 1.......................... 1CB60-1620 ............. 1....................1-1/4CB60-1624 ............. 1....................1-1/2CB60-2016 ............. 1-1/4 ................... 1CB60-2020 ............. 1-1/4 .............1-1/4CB60-2024 ............. 1-1/4 .............1-1/2CB60-2420 ............. 1-1/2 .............1-1/4CB60-2424 ............. 1-1/2 .............1-1/2CB60-2432 ............. 1-1/2 .............1-1/2CB60-3232 ............. 2.......................... 2




BSPP x Tail

P/Number ............... Thread .......... HoseCP60-0608 ............. 3/8.................... 1/2CP60-0612 ............. 3/8.................... 3/4CP60-0812 ............. 1/2................... 3/4CP60-0816 ............. 1/2...................... 1CP60-1212 ............. 3/4.................... 3/4CP60-1216 ............. 3/4....................... 1CP60-1220 ............. 3/4.................1-1/4CP60-1616 ............. 1.......................... 1CP60-1620 ............. 1....................1-1/4CP60-1624 ............. 1....................1-1/2CP60-1632 ............. 1....................1-1/2CP60-2016 ............. 1-1/4 ................... 1CP60-2020 ............. 1-1/4 .............1-1/4CP60-2024 ............. 1-1/4 .............1-1/2CP60-2032 ............. 1-1/4 ................... 2CP60-2424 ............. 1-1/2 .............1-1/2CP60-2432 ............. 1-1/2 .................. 2


NPTF x Tail

P/Number................ Thread...........HoseCN60-0404 ............. 1/4 ....................1/4CN60-0406 ............. 1/4 ....................3/8CN60-0408 ............. 1/4 ....................1/2CN60-0410 ............. 1/4 ....................5/8CN60-0606 ............. 3/8 ....................3/8CN60-0608 ............. 3/8 ....................1/2CN60-0610 ............. 3/8 ....................5/8CN60-0612 ............. 3/8 ....................3/4CN60-0808 ............. 1/2 ....................1/2CN60-0812 ............. 1/2 ................... 3/4

* CN60-1212 ............. 3/4 ....................3/4CN60-1216 ............. 3/4 ....................... 1

* CN60-1612 ............. 1 .......................3/4CN60-1616 ............. 1 .......................... 1

* CN60-1620 ............. 1 ....................1-1/4* CN60-1624 ............. 1 ....................1-1/2* CN60-2016 ............. 1-1/4.................... 1

CN60-2020 ............. 1-1/4..............1-1/4CN60-2024 ............. 1-1/4..............1-1/2CN60-2424 ............. 1-1/2..............1-1/2

2.18

My Notes

Contents



Section 3Permanent Couplings

SUPER-CRIMP TWO PIECE COUPLINGSTo suit Gates hose types: EFG4K, C12M, C12H, CPB+, M3K, M2T,G2, G2H, J2AT, G1, C5C,C5E, C3, C3H, GMV, GT7, GT8,C12-MTF, M3K-MTF, M2T-MTF and J2AT-MTF.

FNP........................Ferrule to suit G1 and G2 Hose; Non Skive ........................................................................ 3.7FN3P......................Ferrule to suit M3K Hose; Non Skive .................................................................................3.7FN4P......................Ferrule to suit M4K Hose; Non Skive .................................................................................3.7FSP ........................Ferrule to suit C5C, C5E, GMV, C3H & TH7 Hose; Skive & Non-Skive .........................3.7FNM2P ..................Ferrule to suit M2T Hose; Non Skive .................................................................................3.7FNT........................Ferrule to suit AFX2000 series Teflon hose........................................................................ 3.7FNS........................Ferrule to suit C12 & EFG4K Hose; Non Skive .................................................................3.7FSS ........................Ferrule to suit C12 Hose; Skive........................................................................................... 3.7

SMB.......................Straight Male BSPT.............................................................................................................3.8SMBX....................Straight Male BSPT Swivel................................................................................................. 3.8SMBX90C .............90° Close Male BSPT Swivel.............................................................................................. 3.8

SFB ........................Straight Female BSPP Swivel .............................................................................................3.8SFB45 ....................45° Tube Style Female BSPP Swivel ..................................................................................3.8SFB90 ....................90° Tube Style Female BSPP Swivel ..................................................................................3.8SFB90C .................90° Close Female BSPP Swivel ..........................................................................................3.8SFBZ......................Straight Female Flat face BSPP Swivel ..............................................................................3.8

SMJ........................Straight Male J.I.C...............................................................................................................3.9SFJ .........................Straight Female J.I.C. Swivel .............................................................................................. 3.9SFJ45 .....................45° Tube Style Female J.I.C. Swivel................................................................................... 3.9SFJ45C ..................45° Close Female J.I.C. Swivel ........................................................................................... 3.9SFJ90 .....................90° Tube Style Female J.I.C. Swivel................................................................................... 3.9SFJ90L...................90° Tube Style Female J.I.C. Long Swivel .........................................................................3.9SFJ90C ..................90° Close Style Female J.I.C. Swivel ..................................................................................3.10

SMORF..................Straight Male ORFS ............................................................................................................ 3.10SFFO......................Straight Female Flat Face O-Ring (ORFS) Swivel .............................................................3.10SFFO45..................45° Tube Female Flat Face O-Ring (ORFS) Swivel ...........................................................3.10SFFO90S ...............90° Tube Style Female Flat Face O-Ring (ORFS) Short Drop Swivel ...............................3.10SFFO90L ...............90° Tube Style Female Flat Face O-Ring (ORFS) Long Drop Swivel ...............................3.10SFNP......................Straight Female BSPP JAPANESE JIS B8363 Swivel 30° Cone Seat ...............................3.10SFK........................Straight Female METRIC JAPANESE JIS B8363 Swivel 30° Cone Seat .........................3.10SFK45....................45° Female METRIC JAPANESE JIS B8363 Swivel 30° Cone Seat ................................ 3.10SFK90....................90° Female METRIC JAPANESE JIS B8363 Swivel 30° Cone Seat ................................ 3.11

SMN ......................Straight Male N.P.T.F.......................................................................................................... 3.11SMNL ....................Straight Male N.P.T.F. Long Series ....................................................................................3.11SFNF......................Straight Female N.P.T.F. Fixed ........................................................................................... 3.11

SHJ ........................Hose Joiner .......................................................................................................................... 3.11SLS ........................Lifesaver Hose End .............................................................................................................3.11SMOX....................Straight Male S.A.E. O-Ring Boss Swivel (U.N. O-Ring) ................................................. 3.11SMOX90C.............90° Male S.A.E. O-Ring Boss Swivel (U.N. O-Ring)......................................................... 3.11SFS ........................Straight Female S.A.E. Swivel ............................................................................................3.11SFS90 ....................90° Female S.A.E. Swivel ...................................................................................................3.11SMIX .....................Straight Male S.A.E. INVERTED FLARE Swivel .............................................................3.12SMIX45 .................45° Tube Style Male S.A.E. INVERTED FLARE Swivel..................................................3.12


Contents



SUPER-CRIMP TWO PIECE COUPLINGS Cont’dSMIX90 .................90° Tube Style Male S.A.E. INVERTED FLARE Swivel ..................................................3.12

SFDKO ..................Straight Female DIN Heavy Series O-Ring Seal Swivel.....................................................3.12SFDKO45 ..............45° Female DIN Heavy Series O-Ring Seal Swivel............................................................3.12SFDKO90 ..............90° Female DIN Heavy Series O-Ring Seal Swivel............................................................3.12SMDKS..................Straight Male DIN Heavy Series .........................................................................................3.12SFDKL...................Straight Female DIN Light Series Universal Cone Seat 24°/60° Swivel ............................3.13SFDKL45...............45° Tube Style Female DIN Light Series Universal Cone Seat 24°/60° Swivel Swivel.....3.13SFDKL90...............90° Tube Style Female DIN Light Series Universal Cone Seat 24°/60° Swivel Swivel.....3.13SMDKL .................Straight Male DIN Light Series ...........................................................................................3.13SMGAZ .................Straight Male French Series.................................................................................................3.13SFGAZ...................Straight Female French Series .............................................................................................3.13

SSS.........................Straight Male STAPLE LOCK System ...............................................................................3.14

HAMMER-CRIMP TWO PIECE COUPLINGSFNH .......................Ferrule to suit EFG4K Non Skive; Hammer-Crimp............................................................3.14HFB........................Straight Female Hammer Coupling .....................................................................................3.14

SUPER-CRIMP TWO PIECE COUPLINGSSFL ........................Straight S.A.E. O-Ring Flange Code 61..............................................................................3.15SFLK......................Straight Komatsu O-Ring Flange ........................................................................................3.15SFL22 ....................22-1/2° S.A.E. O-Ring Flange Code 61...............................................................................3.15SFL30 ....................30° S.A.E. O-Ring Flange Code 61 .....................................................................................3.15SFL45 ....................45° S.A.E. O-Ring Flange Code 61 .....................................................................................3.15SFLK45..................45° Komatsu O-Ring Flange................................................................................................3.15SFL60 ....................60° S.A.E. O-Ring Flange Code 61 .....................................................................................3.15SFL67 ....................67° S.A.E. O-Ring Flange Code 61 .....................................................................................3.15SFL90 ....................90° S.A.E. O-Ring Flange Code 61 .....................................................................................3.16SFLK90..................90° Komatsu O-Ring Flange................................................................................................3.16SFL90L ..................90° S.A.E. O-Ring Flange Long Drop Code 61 ..................................................................3.16SFL110 ..................110° S.A.E. O-Ring Flange Code 61 ...................................................................................3.16SFL135 ..................135° S.A.E. O-Ring Flange Code 61 ...................................................................................3.16SFLH......................Straight S.A.E. O-Ring Flange Code 62..............................................................................3.16SFLH45..................45° S.A.E. O-Ring Flange Code 62 .....................................................................................3.16SFLH90..................90° S.A.E. O-Ring Flange Code 62 .....................................................................................3.16

EZI-CRIMP ONE PIECE COUPLINGSEMB.......................Straight Male BSPT .............................................................................................................3.17EMR.......................Straight Male BSP.P Encapsulated Seal ..............................................................................3.17EFB ........................Straight Female BSPP Swivel..............................................................................................3.17EFB90 ....................90° Tube Style Female BSPP Swivel ..................................................................................3.17EFB90C .................90° Close Female BSPP Swivel...........................................................................................3.17EMNL ....................Straight Male NPT (suit Porta-Power hoses).......................................................................3.17EMJ........................Straight Male J.I.C. ..............................................................................................................3.17EFJ .........................Straight Female J.I.C. Swivel ..............................................................................................3.17EFJ45 .....................45° Close Female J.I.C. Swivel ...........................................................................................3.17EFJ90 .....................90° Tube Style Female J.I.C. Swivel ...................................................................................3.17EFJ90L...................90° Tube Style Female J.I.C. Swivel Long Drop ................................................................3.18EFJ90C ..................90° Close Style Female J.I.C. Swivel ..................................................................................3.18

Contents




EZI-CRIMP ONE PIECE COUPLINGS Cont’dEFFO .....................Straight Female Flat Face O-Ring (ORFS) Swivel .............................................................3.18EFFO45 .................45° Tube Style Female Flat Face O-Ring (ORFS) Swivel ..................................................3.18EFFO90 .................90° Tube Style Female Flat Face O-Ring (ORFS) Swivel ..................................................3.18

GLOBAL-CRIMP GS & GSP TWO PIECE COUPLINGSGS1F......................Global Spiral Ferrules (Non-Skive).....................................................................................3.19MB.........................Male O-Ring Boss ............................................................................................................... 3.19MP .........................Male Pipe NPTF 30° Cone Seat ..........................................................................................3.19MBSPP ..................Male British Standard Pipe Parallel.....................................................................................3.19FBSPORX .............Female British Standard Pipe Parallel O-Ring Swivel ........................................................3.19FBSPORX45 .........Female British Standard Pipe Parallel O-Ring Swivel 45° Bent Tube................................ 3.19FBSPORX90 .........Female British Standard Pipe Parallel O-Ring Swivel 90° Bent Tube................................ 3.19

MJ ..........................Male JIC 37° Flare............................................................................................................... 3.19FJX ........................Female JIC 37° Flare Swivel ...............................................................................................3.20FJX45 ....................Female JIC 37° Flare Swivel 45° Bent Tube....................................................................... 3.20FJX90 ....................Female JIC 37° Flare Swivel 90° Bent Tube....................................................................... 3.20

MFFOR..................Male Flat Face O-Ring ........................................................................................................3.20FFORX ..................Female Flat Face Swivel...................................................................................................... 3.20FFORX45 ..............Female Flat Face Swivel 45° Bent Tube ............................................................................. 3.20FFORX90 ..............Female Flat Face Swivel 90° Bent Tube ............................................................................. 3.21

MDH......................Male 24° Cone Heavy Series...............................................................................................3.21FDHORX...............Female DIN 24° Cone Swivel Heavy Series With O-Ring ................................................. 3.21FDHORX45...........Female DIN 24° Cone Swivel Heavy Series With O-Ring 45° Bent Tube.........................3.21FDHORX90...........Female DIN 24° Cone Swivel Heavy Series With O-Ring 90° Bent Tube.........................3.21

FL ..........................Code 61 O-Ring Flange ....................................................................................................... 3.22FL22 ......................Code 61 O-Ring Flange 22.5° Bent Tube............................................................................3.22FL30 ......................Code 61 O-Ring Flange 30° Bent Tube...............................................................................3.22FL45 ......................Code 61 O-Ring Flange 45° Bent Tube...............................................................................3.22FL60 ......................Code 61 O-Ring Flange 60° Bent Tube...............................................................................3.22FL67 ......................Code 61 O-Ring Flange 67.5° Bent Tube............................................................................3.22FL90 ......................Code 61 O-Ring Flange 90° Bent Tube...............................................................................3.22FL110 ....................Code 61 O-Ring Flange 110° Bent Tube............................................................................. 3.22

FLH........................Code 62 O-Ring Flange Heavy ........................................................................................... 3.23FLH22....................Code 62 O-Ring Flange Heavy 22.5° Bent Tube ................................................................3.23FLH30....................Code 62 O-Ring Flange Heavy 30° Bent Tube ...................................................................3.23FLH45....................Code 62 O-Ring Flange Heavy 45° Bent Tube ...................................................................3.23FLH60....................Code 62 O-Ring Flange Heavy 60° Bent Tube ...................................................................3.23FLH90....................Code 62 O-Ring Flange Heavy 90° Bent Tube ...................................................................3.23

FLC........................Caterpillar Style O-Ring Flange ..........................................................................................3.24FLC22....................Caterpillar Style O-Ring Flange 22.5° Bent Tube............................................................... 3.24FLC30....................Caterpillar Style O-Ring Flange 30° Bent Tube.................................................................. 3.24FLC45....................Caterpillar Style O-Ring Flange 45° Bent Tube.................................................................. 3.24FLC60....................Caterpillar Style O-Ring Flange 60° Bent Tube.................................................................. 3.24FLC67....................Caterpillar Style O-Ring Flange 67.5° Bent Tube............................................................... 3.24FLC90....................Caterpillar Style O-Ring Flange 90° Bent Tube.................................................................. 3.24


Contents



GLOBAL-CRIMP GSH ONE PIECE COUPLINGSGSM-MP................Male Pipe NPTF 30° Cone Seat ..........................................................................................3.25GSM-MJ ................Male JIC 37° Flare...............................................................................................................3.25

GSM-FJX...............Female JIC 37° Flare Swivel ...............................................................................................3.25GSM-FJX45...........Female JIC 37° Flare Swivel 45° Bent Tube.......................................................................3.25GSM-FJX90...........Female JIC 37° Flare Swivel 90° Bent Tube.......................................................................3.25

GSM-FBSPORX....Female BSPP Swivel ...........................................................................................................3.25GSM-FFORX ........Female Flat Face Swivel (4000psi limited) .........................................................................3.25GSM-FFORX45 ....Female Flat Face Swivel 45° Bent Tube (4000psi limited).................................................3.25GSM-FFORX90 ....Female Flat Face Swivel 90° Bent Tube (4000psi limited).................................................3.25

GSM-FDHORX.....Female DIN 24° Cone Swivel Heavy Series with O-Ring ..................................................3.25GSM-FDHORX45.Female DIN 24° Cone Swivel Heavy Series with O-Ring 45° Bent Tube..........................3.25GSM-FDHORX90.Female DIN 24° Cone Swivel Heavy Series with O-Ring 90° Bent Tube..........................3.25

GSM-FL.................Code 61 O-Ring Flange .......................................................................................................3.26GSM-FL30.............Code 61 O-Ring Flange 30° Bent Tube...............................................................................3.26GSM-FL45.............Code 61 O-Ring Flange 45° Bent Tube...............................................................................3.26GSM-FL60.............Code 61 O-Ring Flange 60° Bent Tube...............................................................................3.26GSM-FL90.............Code 61 O-Ring Flange 90° Bent Tube...............................................................................3.26

GSM-FLH..............Code 62 O-Ring Flange Heavy............................................................................................3.26GSM-FLH22..........Code 62 O-Ring Flange Heavy 22.5° Bent Tube ................................................................3.23GSM-FLH30..........Code 62 O-Ring Flange Heavy 30° Bent Tube ...................................................................3.26GSM-FLH45..........Code 62 O-Ring Flange Heavy 45° Bent Tube ...................................................................3.26GSM-FLH60..........Code 62 O-Ring Flange Heavy 60° Bent Tube ...................................................................3.26GSM-FLH90..........Code 62 O-Ring Flange Heavy 90° Bent Tube ...................................................................3.26

GSM-FLC ..............Caterpillar Style O-Ring Flange ..........................................................................................3.27GSM-FLC22 ..........Caterpillar Style O-Ring Flange 22.5° Bent Tube...............................................................3.27GSM-FLC30 ..........Caterpillar Style O-Ring Flange 30° Bent Tube..................................................................3.27GSM-FLC45 ..........Caterpillar Style O-Ring Flange 45° Bent Tube..................................................................3.27GSM-FLC60 ..........Caterpillar Style O-Ring Flange 60° Bent Tube..................................................................3.27GSM-FLC90 ..........Caterpillar Style O-Ring Flange 90° Bent Tube..................................................................3.27

Contents




MAXI-CRIMP PCM TWO PIECE COUPLINGSPCM.......................Ferrule PCM (Skiving Required) ........................................................................................ 3.28MP .........................Male Pipe NPTF 30° Cone Seat ..........................................................................................3.28MJ ..........................Male JIC 37° Flare............................................................................................................... 3.28FJX ........................Female JIC 37° Flare Swivel ...............................................................................................3.28FJX90 ....................Female JIC 37° Flare Swivel 90° Bent Tube....................................................................... 3.28FFORX ..................Female Flat Face Swivel...................................................................................................... 3.28FFORX90 ..............Female Flat Face Swivel 90° Bent Tube ............................................................................. 3.28

FL ..........................Code 61 O-Ring Flange ....................................................................................................... 3.28FL30 ......................Code 61 O-Ring Flange 30° Bent Tube...............................................................................3.28FL45 ......................Code 61 O-Ring Flange 45° Bent Tube...............................................................................3.28FL60 ......................Code 61 O-Ring Flange 60° Bent Tube...............................................................................3.28FL90 ......................Code 61 O-Ring Flange 90° Bent Tube...............................................................................3.28

FLH........................Code 62 O-Ring Flange Heavy ........................................................................................... 3.29FLH22....................Code 62 O-Ring Flange Heavy 22.5° Bent Tube ................................................................3.29FLH30....................Code 62 O-Ring Flange Heavy 30° Bent Tube ...................................................................3.29FLH45....................Code 62 O-Ring Flange Heavy 45° Bent Tube ...................................................................3.29FLH60....................Code 62 O-Ring Flange Heavy 60° Bent Tube ...................................................................3.29FLH90....................Code 62 O-Ring Flange Heavy 90° Bent Tube ...................................................................3.29

FLC........................Caterpillar Style O-Ring Flange ..........................................................................................3.29FLC22....................Caterpillar Style O-Ring Flange 22.5° Bent Tube............................................................... 3.29FLC30....................Caterpillar Style O-Ring Flange 30° Bent Tube.................................................................. 3.29FLC45....................Caterpillar Style O-Ring Flange 45° Bent Tube.................................................................. 3.29FLC60....................Caterpillar Style O-Ring Flange 60° Bent Tube.................................................................. 3.29FLC90....................Caterpillar Style O-Ring Flange 90° Bent Tube.................................................................. 3.29

VACU-CRIMP GL ONE PIECE COUPLINGSFL ..........................Code 61 O-Ring Flange ....................................................................................................... 3.30FL22 ......................Code 61 O-Ring Flange 22.5° Bent Tube............................................................................3.30FL30 ......................Code 61 O-Ring Flange 30° Bent Tube...............................................................................3.30FL45 ......................Code 61 O-Ring Flange 45° Bent Tube...............................................................................3.30FL60 ......................Code 61 O-Ring Flange 60° Bent Tube...............................................................................3.30FL67 ......................Code 61 O-Ring Flange 67.5° Bent Tube............................................................................3.30FL90 ......................Code 61 O-Ring Flange 90° Bent Tube...............................................................................3.30


Contents



THIS PAGE INTENTIONALLY LEFT (MOSTLY) BLANK

For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability. 3.7

Section 3Super-Crimp Couplings - Two Piece

Super-Crimp FerruleNon Skive

Suits G2, G2H, G2XH, J2AT, G1,C5C, C5E,

GMV

P/Number ................... .................. HoseFNP-03 ....................... ................... 3/16FNP-04 ....................... ..................... 1/4FNP-05 ....................... ................... 5/16FNP-06 ....................... ..................... 3/8FNP-08 ....................... ..................... 1/2FNP-10 ....................... ..................... 5/8FNP-12 ....................... ..................... 3/4FNP-16 ....................... ........................ 1FNP-20 ....................... ..................1-1/4FNP-24 ....................... ..................1-1/2FNP-32 ....................... ........................ 2


Suits M3K, M3K-XTF &M3K-MTF

P/Number ................... .................. HoseFN3P-04 ..................... ..................... 1/4FN3P-06 ..................... ..................... 3/8FN3P-08 ..................... ..................... 1/2FNP-10 ....................... ..................... 5/8FNP-12 ....................... ..................... 3/4FNS-16 ....................... ........................ 1

Super-Crimp FerruleNon SkiveSuits M4K

P/Number ................... .................. HoseFN4P-04 ..................... ..................... 1/4FN4P-06 ..................... ..................... 3/8FNP-08 ....................... ..................... 1/2FNS-12 ....................... ..................... 3/4

Super-Crimp FerruleSkive & Non Skive Hose

Suits C5C, C5E,GMV, C3H & TH7

P/Number.................... ..................Hose FSP-204 ...................... .....................1/4* FSP-205 ...................... ...................5/16 FSP-206A ................... .....................3/8 FSP-206 ...................... .....................3/8

FSP-208 ...................... .....................1/2 FSP-210 ...................... .....................5/8

FSP-212 ...................... .....................3/4FSP-216 ...................... ........................ 1

FSP-220 ...................... ..................1-1/4 FSP-424 ...................... ..................1-1/2 FSP-432 ...................... ........................ 2


Suits M2T & M2T-MTF

P/Number.................... ..................HoseFNP-03 (suits 1/4" bore) ..................1/4FNM2P-06.................. .....................3/8FNM2P-08.................. .....................1/2FNM2P-10.................. .....................5/8FNM2P-12.................. .....................3/4FNM2P-16.................. ........................ 1


Suits AFX2000 SeriesTeflon Hose

P/Number.................... ..................HoseFNT-04 ....................... .....................1/4FNT-06 ....................... .....................3/8FNT-08 ....................... .....................1/2FNT-10 ....................... .....................5/8FNT-12 ....................... .....................3/4FNT-16 ....................... ........................ 1


Suits C12M, C12, C12-MTF& EFG4K

P/Number................... ...................HoseFNS-06....................... ......................3/8FNS-08....................... ......................1/2FNS-10....................... ....................5/16FNS-12....................... ......................3/4FNS-16....................... .........................1FNS-20....................... .................. 1-1/4FNS-24....................... .................. 1-1/2FNS-32....................... .........................2

Super-Crimp FerruleSkive

Suits C12M, C12 & C12-MTF

P/Number................... ...................HoseFSS-06 ....................... ......................3/8FSS-08 ....................... ......................1/2FSS-12 ....................... ......................3/4FSS-16 ....................... .........................1FSS-20 ....................... .................. 1-1/4FSS-24 ....................... .................. 1-1/2FSS-32 ....................... .........................2

3.8 For stainless steel quote standard part number and add suffix "SS". Enquire for price and availability.


Straight Male BSPT

P/Number................... Thread .......HoseSMB-0204.................. 1/8.................1/4SMB-0404.................. 1/4.................1/4SMB-0406.................. 1/4.................3/8SMB-0604.................. 3/8.................1/4SMB-0606.................. 3/8.................3/8SMB-0608.................. 3/8.................1/2SMB-0806.................. 1/2.................3/8SMB-0808.................. 1/2.................1/2SMB-1010.................. 5/8.................5/8SMB-1208.................. 3/4.................1/2SMB-1210.................. 3/4.................5/8SMB-1212.................. 3/4.................3/4SMB-1612.................. 1....................3/4SMB-1616.................. 1.......................1SMB-2020.................. 1-1/4 ......... 1-1/4SMB-2424.................. 1-1/2 ......... 1-1/2SMB-3232.................. 2.......................2

Straight Male BSPTSwivel

P/Number................... Thread .......HoseSMBX-0404............... 1/4.................1/4SMBX-0604............... 3/8.................1/4SMBX-0606............... 3/8.................3/8SMBX-0806............... 1/2.................3/8SMBX-0808............... 1/2.................1/2

90° Close Male BSPTSwivel

P/Number................... Thread .......Hose* SMBX90C-0606 ........ 3/8.................3/8

SMBX90C-0806 ........ 1/2.................3/8SMBX90C-0808 ........ 1/2.................1/2


P/Number ...................Thread....... HoseSFB-0204 ................... 1/8 ................ 1/4SFB-0404 ................... 1/4 ................ 1/4SFB-0406 ................... 1/4 ................ 3/8SFB-0604 ................... 3/8 ................ 1/4SFB-0606 ................... 3/8 ................ 3/8SFB-0608 ................... 3/8 ................ 1/2SFB-0806 ................... 1/2 ................ 3/8SFB-0808 ................... 1/2 ................ 1/2SFB-1010 ................... 5/8 ................ 5/8SFB-1208 ................... 3/4 ................ 1/2SFB-1212 ................... 3/4 ................ 3/4SFB-1612 ................... 1 ................... 3/4SFB-1616 ................... 1 ...................... 1SFB-1620 ................... 1 ................ 1-1/4SFB-2016 ................... 1-1/4................ 1SFB-2020 ................... 1-1/4.......... 1-1/4SFB-2424 ................... 1-1/2.......... 1-1/2SFB-3232 ................... 2 ...................... 2


P/Number ...................Thread....... HoseSFB45-0404 ...............1/4 ................ 1/4SFB45-0606 ...............3/8 ................ 3/8SFB45-0806 ...............1/2 ................ 3/8SFB45-0808 ...............1/2 ................ 1/2SFB45-1010 ...............5/8 ................ 5/8SFB45-1212 ...............3/4 ................ 3/4SFB45-1616 ...............1 ...................... 1SFB45-2020 ...............1-1/4.......... 1-1/4SFB45-2424 ...............1-1/2.......... 1-1/2SFB45-3232 ...............2 ...................... 2


P/Number ...................Thread .......HoseSFB90-0404 ...............1/4 ................ 1/4SFB90-0604 ...............3/8 ................ 1/4SFB90-0606 ...............3/8 ................ 3/8SFB90-0806 ...............1/2 ................ 3/8SFB90-0808 ...............1/2 ................ 1/2SFB90-1010 ...............5/8 ................ 5/8SFB90-1212 ...............3/4 ................ 3/4SFB90-1616 ...............1 ...................... 1SFB90-2020 ...............1-1/4..........1-1/4SFB90-2424 ...............1-1/2..........1-1/2SFB90-3232 ...............2 ...................... 2


P/Number ...................Thread .......HoseSFB90C-0404.............1/4 ................ 1/4SFB90C-0606.............3/8 ................ 3/8SFB90C-0808.............1/2 ................ 1/2SFB90C-1212.............3/4 ................ 3/4SFB90C-1616.............1 ...................... 1

Straight Female BSPPSwivel Flat Seat

P/Number ...................Thread .......HoseSFBZ-0606 .................3/8 ................ 3/8SFBZ-0806 .................1/2 ................ 3/8SFBZ-0808 .................1/2 ................ 1/2

* SFBZ-1212 .................3/4 ................ 3/4



Straight Male JIC

P/Number ...................Thread....... HoseSMJ-0704 ...................7/16 .............. 1/4SMJ-0804 ...................1/2 ................ 1/4SMJ-0904 ...................9/16 .............. 1/4SMJ-0906 ...................9/16 .............. 3/8SMJ-1206 ...................3/4 ................ 3/8SMJ-1208 ...................3/4 ................ 1/2SMJ-1408 ...................7/8 ................ 1/2SMJ-1410 ...................7/8 ................ 5/8SMJ-1708 ...................1-1/16........... 1/2SMJ-1710 ...................1-1/16........... 5/8SMJ-1712 ...................1-1/16........... 3/4SMJ-2112 ...................1-5/16........... 3/4SMJ-2116 ...................1-5/16.............. 1SMJ-2616 ...................1-5/8................ 1SMJ-2620 ...................1-5/8..........1-1/4SMJ-3024 ...................1-7/8..........1-1/2

* SMJ-4032 ...................2-1/2................ 2


P/Number ...................Thread....... HosePFJ-0703 ....................7/16 ............ 3/16SFJ-0704 ....................7/16 .............. 1/4SFJ-0804 ....................1/2 ................ 1/4SFJ-0904 ....................9/16 .............. 1/4PFJ-0905 ....................9/16 ............ 5/16SFJ-0906 ....................9/16 .............. 3/8SFJ-0908 ....................9/16 .............. 1/2

* SFJ-1204 ....................3/4 ................ 1/4SFJ-1206 ....................3/4 ................ 3/8SFJ-1208 ....................3/4 ................ 1/2SFJ-1210 ....................3/4 ................ 5/8SFJ-1406 ....................7/8 ................ 3/8SFJ-1408 ....................7/8 ................ 1/2SFJ-1410 ....................7/8 ................ 5/8SFJ-1412 ....................7/8 ................ 3/4SFJ-1708 ....................1-1/16........... 1/2SFJ-1710 ....................1-1/16........... 5/8SFJ-1712 ....................1-1/16........... 3/4SFJ-1716 ....................1-1/16.............. 1SFJ-1912 ....................1-3/16........... 3/4SFJ-2112 ....................1-5/16........... 3/4SFJ-2116 ....................1-5/16.............. 1SFJ-2120 ....................1-5/16........1-1/4SFJ-2616 ....................1-5/8................ 1SFJ-2620 ....................1-5/8..........1-1/4SFJ-3024 ....................1-7/8..........1-1/2SFJ-4032 ....................2-1/2................ 2


P/Number....................Thread .......HoseSFJ45-0704.................7/16 ..............1/4SFJ45-0804.................1/2 ................1/4SFJ45-0904.................9/16 ..............1/4SFJ45-0906.................9/16 ..............3/8SFJ45-1206.................3/4 ................3/8SFJ45-1208.................3/4 ................1/2SFJ45-1408.................7/8 ................1/2SFJ45-1410.................7/8 ................5/8SFJ45-1412.................7/8 ................3/4SFJ45-1710.................1-1/16 ...........5/8SFJ45-1712.................1-1/16 ...........3/4SFJ45-1912.................1-3/16 ...........3/4SFJ45-2112.................1-5/16 ...........3/4SFJ45-2116.................1-5/16 .............. 1SFJ45-2620.................1-5/8 ..........1-1/4SFJ45-3024.................1-7/8 ..........1-1/2SFJ45-4032.................2-1/2 ................ 2


P/Number....................Thread .......HoseSFJ45C-0704 ..............7/16 ..............1/4SFJ45C-0904 ..............9/16 ..............1/4SFJ45C-1408 ..............7/8 ................1/2SFJ45C-1712 ..............1-1/16 ...........3/4


P/Number................... Thread .......HoseSFJ90-0704 ................ 7/16...............1/4SFJ90-0804 ................ 1/2.................1/4SFJ90-0904 ................ 9/16...............1/4SFJ90-0906 ................ 9/16...............3/8SFJ90-1206 ................ 3/4.................3/8SFJ90-1208 ................ 3/4.................1/2SFJ90-1406 ................ 7/8.................3/8SFJ90-1408 ................ 7/8.................1/2SFJ90-1410 ................ 7/8.................5/8SFJ90-1412 ................ 7/8.................3/4SFJ90-1708 ................ 1-1/16 ...........1/2SFJ90-1710 ................ 1-1/16 ...........5/8SFJ90-1712 ................ 1-1/16 ...........3/4SFJ90-1912 ................ 1-3/16 ...........3/4SFJ90-2112 ................ 1-5/16 ...........3/4SFJ90-2116 ................ 1-5/16 ..............1SFJ90-2620 ................ 1-5/8 ......... 1-1/4SFJ90-3024 ................ 1-7/8 ......... 1-1/2SFJ90-4032 ................ 2-1/2 ................2

90° Tube Female JICLong Swivel

P/Number................... Thread .......HoseSFJ90L-0704.............. 7/16...............1/4SFJ90L-0904.............. 9/16...............1/4SFJ90L-0906.............. 9/16...............3/8SFJ90L-1206.............. 3/4.................3/8SFJ90L-1208.............. 3/4.................1/2SFJ90L-1408.............. 7/8.................1/2SFJ90L-1712.............. 1-1/16 ...........3/4SFJ90L-2116.............. 1-5/16 ..............1




P/Number................... Thread .......HoseSFJ90C-0704 ............. 7/16...............1/4SFJ90C-0904 ............. 9/16...............1/4SFJ90C-0906 ............. 9/16...............3/8SFJ90C-1206 ............. 3/4.................3/8SFJ90C-1208 ............. 3/4.................1/2SFJ90C-1408 ............. 7/8.................1/2SFJ90C-1712 ............. 1-1/16 ...........3/4SFJ90C-2116 ............. 1-5/16 ..............1

Straight MaleFlat Faced O-Ring (ORFS)

P/Number................... Thread .......HoseSMORF-0904 ............ 9/16...............1/4SMORF-1106 ............ 11/16.............3/8SMORF-1306 ............ 13/16.............3/8SMORF-1308 ............ 13/16.............1/2SMORF-1608 ............ 1....................1/2SMORF-1610 ............ 1....................5/8SMORF-1910 ............ 1-3/16 ...........5/8SMORF-1912 ............ 1-3/16 ...........3/4SMORF-2312 ............ 1-7/16 ...........3/4SMORF-2316 ............ 1-7/16 ..............1

Straight Female Flat Faced O-Ring (ORFS)

Swivel

P/Number................... Thread .......HoseSFFO-0904 ................ 9/16...............1/4SFFO-1104 ................ 11/16.............1/4SFFO-1106 ................ 11/16.............3/8SFFO-1306 ................ 13/16.............3/8SFFO-1308 ................ 13/16.............1/2SFFO-1608 ................ 1....................1/2SFFO-1610 ................ 1....................5/8SFFO-1912 ................ 1-3/16 ...........3/4SFFO-2312 ................ 1-7/16 ...........3/4SFFO-2316 ................ 1-7/16 ..............1SFFO-2720 ................ 1-11/16 ..... 1-1/4SFFO-3224 ................ 2................ 1-1/2

45° Tube FemaleFlat Faced O-Ring (ORFS)

Swivel

P/Number ...................Thread....... HoseSFFO45-0904.............9/16 .............. 1/4SFFO45-1104.............11/16............ 1/4SFFO45-1106.............11/16............ 3/8SFFO45-1306.............13/16............ 3/8SFFO45-1308.............13/16............ 1/2SFFO45-1608.............1 ................... 1/2SFFO45-1610.............1 ................... 5/8SFFO45-1910.............1-3/16........... 5/8SFFO45-1912.............1-3/16........... 3/4SFFO45-2316.............1-7/16.............. 1SFFO45-2720.............1-11/16...... 1-1/4SFFO45-3224.............2 ................ 1-1/2


Short Drop Swivel

P/Number ...................Thread....... HoseSFFO90S-0904...........9/16 .............. 1/4SFFO90S-1104...........11/16............ 1/4SFFO90S-1106...........11/16............ 3/8SFFO90S-1306...........13/16............ 3/8SFFO90S-1308...........13/16............ 1/2SFFO90S-1608...........1 ................... 1/2SFFO90S-1610...........1 ................... 5/8SFFO90S-1910...........1-3/16........... 5/8SFFO90S-1912...........1-3/16........... 3/4SFFO90S-2312...........1-7/16........... 3/4SFFO90S-2316...........1-7/16.............. 1SFFO90S-2720...........1-11/16...... 1-1/4SFFO90S-3224...........2 ................ 1-1/2


Long Drop Swivel

P/Number ...................Thread....... HoseSFFO90L-0904 .......... 9/16 .............. 1/4SFFO90L-1106 .......... 11/16............ 3/8SFFO90L-1308 .......... 13/16............ 1/2SFFO90L-1912 .......... 19/16............ 3/4SFFO90L-2316 .......... 1-7/16.............. 1

Straight Female BSPPJapanese JIS B8363

30° Cone Swivel

P/Number ...................Thread .......HoseSFNP-0404 .................1/4 ................ 1/4SFNP-0606 .................3/8 ................ 3/8SFNP-0806 .................1/2 ................ 3/8SFNP-0808 .................1/2 ................ 1/2SFNP-1212 .................3/4 ................ 3/4SFNP-1616 .................1 ...................... 1SFNP-2020 .................1-1/4..........1-1/4

Straight Female MetricJapanese JIS B8363

30° Cone SwivelKomatsu

P/Number ............ Thread .............HoseSFK-1404 ............ M14 x 1.5 ........... 1/4SFK-1806 ............ M18 x 1.5 ........... 3/8SFK-2006 ............ M20 x 1.5 ........... 3/8SFK-2208 ............ M22 x 1.5 ........... 1/2SFK-2410 ............ M24 x 1.5 ........... 5/8SFK-3012 ............ M30 x 1.5 ........... 3/4SFK-3316 ............ M33 x 1.5 .............. 1

45° Female MetricJapanese JIS B8363


P/Number ............ Thread .............HoseSFK45-1404 ........ M14 x 1.5 ........... 1/4SFK45-1806 ........ M18 x 1.5 ........... 3/8SFK45-2208 ........ M22 x 1.5 ........... 1/2SFK45-2410 ........ M24 x 1.5 ........... 5/8SFK45-3012 ........ M30 x 1.5 ........... 3/4SFK45-3316 ........ M33 x 1.5 .............. 1



90° Female MetricJapanese JIS B8363


P/Number .............Thread............. HoseSFK90-1404 .........M14 x 1.5........... 1/4SFK90-1806 .........M18 x 1.5........... 3/8SFK90-2208 .........M22 x 1.5........... 1/2SFK90-2410 .........M24 x 1.5........... 5/8SFK90-3012 .........M30 x 2.0........... 3/4SFK90-3316 .........M33 x 2.0.............. 1

Straight Male NPTF

P/Number ...................Thread....... HoseSMN-0204..................1/8 ................ 1/4SMN-0404..................1/4 ................ 1/4SMN-0406..................1/4 ................ 3/8SMN-0604..................3/8 ................ 1/4SMN-0606..................3/8 ................ 3/8SMN-0608..................3/8 ................ 1/2SMN-0806..................1/2 ................ 3/8SMN-0808..................1/2 ................ 1/2SMN-1208..................3/4 ................ 1/2SMN-1212..................3/4 ................ 3/4SMN-1616..................1 ...................... 1SMN-2020..................1-1/4..........1-1/4SMN-2424 .................1-1/2..........1-1/2SMN-3232..................2 ...................... 2

Straight Male NPTFLong SeriesPorta-Power

(superseded byEMNL-0604 p3.17)

P/Number ...................Thread....... HoseSMNL-06049.15 ........3/8 ................ 1/4

Fixed Female NPTF

P/Number....................Thread .......HoseSFNF-0404 .................1/4 ................1/4

* SFNF-0606 .................3/8 ................3/8

Hose Joiner

P/Number.................... ..................HoseSHJ-0404 .................... .....................1/4SHJ-0606 .................... .....................3/8SHJ-0808 .................... .....................1/2SHJ-1212 .................... .....................3/4

Lifesaver Hose Ends

P/Number....................Thread .......HoseSLS-0404....................1/4 ................1/4SLS-0604....................3/8 ................1/4SLS-0606....................3/8 ................3/8SLS-10M06Z..............5/8 ................3/8SLS-0806....................1/2 ................3/8SLS-0808....................1/2 ................1/2SLS-1008....................5/8 ................1/2SLS-1010....................5/8 ................5/8SLS-1012....................5/8 ................3/4SLS-1212....................3/4 ................3/4SLS-1612....................1 ...................3/4SLS-1616....................1 ...................... 1SLS-2020....................1-1/4 ..........1-1/4SLS-2424....................1-1/2 ..........1-1/2

Straight MaleS.A.E. O-Ring Boss

(Swivel)

P/Number................... Thread .......HoseSMOX-0704 .............. 7/16...............1/4SMOX-0806 .............. 1/2.................3/8SMOX-0906 .............. 9/16...............3/8SMOX-1204 .............. 3/4.................1/4SMOX-1206 .............. 3/4.................3/8SMOX-1208 .............. 3/4.................1/2SMOX-1408 .............. 7/8.................1/290 Duro O Ring supplied

90° Close Male SwivelS.A.E. O-Ring Boss

P/Number................... Thread .......HoseSMOX90C-1206........ 3/4.................3/8SMOX90C-1208........ 3/4.................1/2SMOX90C-1408........ 7/8.................1/290 Duro O Ring supplied

Straight Female S.A.ESwivel

P/Number................... Thread .......HoseSFS-0804 ................... 1/2.................1/4SFS-1006 ................... 5/8.................3/8SFS-1206 ................... 3/4.................3/8

90° Female S.A.ESwivel

P/Number................... Thread .......HoseSFS90-1006 ............... 5/8.................3/8SFS90-1206 ............... 3/4.................3/8




P/Number................... Thread .......HoseSMIX-0704 ................ 7/16...............1/4SMIX-0804 ................ 1/2.................1/4SMIX-1006 ................ 5/8.................3/8


P/Number................... Thread .......Hose* SMIX45-0704 ............ 7/16...............1/4* SMIX45-0804 ............ 1/2.................1/4

SMIX45-1006 ............ 5/8.................3/8


P/Number................... Thread .......HoseSMIX90-0704 ............ 7/16...............1/4SMIX90-0804 ............ 1/2.................1/4SMIX90-1006 ............ 5/8.................3/8

Straight FemaleSwivel DIN

Heavy O-Ring

P/Number .............Thread ............. HoseSFDKO-1404 .......M14 x 1.5........... 1/4SFDKO-1604 .......M16 x 1.5........... 1/4SFDKO-1804 .......M18 x 1.5........... 1/4SFDKO-1806 .......M18 x 1.5........... 3/8SFDKO-2006 .......M20 x 1.5........... 3/8SFDKO-2206 .......M22 x 1.5........... 3/8SFDKO-2208 .......M22 x 1.5........... 1/2SFDKO-2408 .......M24 x 1.5........... 1/2SFDKO-3010 .......M30 x 2.0........... 5/8SFDKO-3012 .......M30 x 2.0........... 3/4SFDKO-3612 .......M36 x 2.0........... 3/4SFDKO-3616 .......M36 x 2.0.............. 1SFDKO-4216 .......M42 x 2.0.............. 1SFDKO-5220 .......M52 x 2.0........ 1-1/4SFDKO-5224 .......M52 x 2.0........ 1-1/2

45° FemaleSwivel DIN

Heavy O-Ring

P/Number .............Thread ............. HoseSFDKO45-1404 ...M14 x 1.5........... 1/4SFDKO45-1604 ...M16 x 1.5........... 1/4SFDKO45-1804 ...M18 x 1.5........... 1/4SFDKO45-1806 ...M18 x 1.5........... 3/8SFDKO45-2006 ...M20 x 1.5........... 3/8SFDKO45-2008 ...M20 x 1.5........... 1/2SFDKO45-2408 ...M24 x 1.5........... 1/2SFDKO45-3010 ...M30 x 2.0........... 5/8SFDKO45-3012 ...M30 x 2.0........... 3/4SFDKO45-3612 ...M36 x 2.0........... 3/4SFDKO45-5220 ...M52 x 2.0........ 1-1/4

90° FemaleSwivel DIN

Heavy O-Ring

P/Number ............ Thread .............HoseSFDKO90-1404 .. M14 x 1.5 ........... 1/4SFDKO90-1604 .. M16 x 1.5 ........... 1/4SFDKO90-1804 .. M18 x 1.5 ........... 1/4SFDKO90-1806 .. M18 x 1.5 ........... 3/8SFDKO90-2006 .. M20 x 1.5 ........... 3/8SFDKO90-2206 .. M22 x 1.5 ........... 3/8SFDKO90-2208 .. M22 x 1.5 ........... 1/2SFDKO90-2408 .. M24 x 1.5 ........... 1/2SFDKO90-3010 .. M30 x 2.0 ........... 5/8SFDKO90-3012 .. M30 x 2.0 ........... 3/4SFDKO90-3612 .. M36 x 2.0 ........... 3/4SFDKO90-5220 .. M52 x 2.0 ........1-1/4

Straight Male DINHeavy Series

P/Number ............ Thread .............HoseSMDKS-1404...... M14 x 1.5 ........... 1/4SMDKS-1604...... M16 x 1.5 ........... 1/4SMDKS-1804...... M18 x 1.5 ........... 1/4SMDKS-2006...... M20 x 1.5 ........... 3/8SMDKS-2206...... M22 x 1.5 ........... 3/8SMDKS-2408...... M24 x 1.5 ........... 1/2SMDKS-3010...... M30 x 2.0 ........... 5/8SMDKS-3012...... M30 x 2.0 ........... 3/4SMDKS-3612...... M36 x 2.0 ........... 3/4SMDKS-3616...... M36 x 2.0 .............. 1SMDKS-4216...... M42 x 2.0 .............. 1SMDKS-5220...... M52 x 2.0 ........1-1/4



Straight FemaleSwivel DINLight Series

Universal Cone Seat24°/60° Cone

P/Number .............Thread ............. HoseSFDKL-1204........M12 x 1.5........... 1/4SFDKL-1404........M14 x 1.5........... 1/4SFDKL-1604........M16 x 1.5........... 1/4SFDKL-1606........M16 x 1.5........... 3/8SFDKL-1608........M16 x 1.5........... 1/2SFDKL-1806........M18 x 1.5........... 3/8SFDKL-1808........M18 x 1.5........... 1/2SFDKL-2206........M22 x 1.5........... 3/8SFDKL-2208........M22 x 1.5........... 1/2SFDKL-2210........M22 x 1.5........... 5/8SFDKL-2608........M26 x 1.5........... 1/2SFDKL-2610........M26 x 1.5........... 5/8SFDKL-2612........M26 x 1.5........... 3/4SFDKL-3012........M30 x 2.0........... 3/4SFDKL-3616........M36 x 2.0.............. 1SFDKL-4520........M45 x 2.0........1-1/4SFDKL-5224........M52 x 2.0........1-1/2

45° FemaleSwivel DINLight Series


P/Number .............Thread ............. HoseSFDKL45-1204....M12 x 1.5........... 1/4SFDKL45-1404....M14 x 1.5........... 1/4SFDKL45-1604....M16 x 1.5........... 1/4SFDKL45-1606....M16 x 1.5........... 3/8SFDKL45-1806....M18 x 1.5........... 3/8SFDKL45-1808....M18 x 1.5........... 1/2SFDKL45-2208....M22 x 1.5........... 1/2SFDKL45-2608....M26 x 1.5........... 1/2SFDKL45-2610....M26 x 1.5........... 5/8SFDKL45-3012....M30 x 2.0........... 3/4

90° FemaleSwivel DINLight Series


P/Number............. Thread .............HoseSFDKL90-1204 ... M12 x 1.5 ...........1/4SFDKL90-1404 ... M14 x 1.5 ...........1/4SFDKL90-1604 ... M16 x 1.5 ...........1/4SFDKL90-1606 ... M16 x 1.5 ...........3/8SFDKL90-1806 ... M18 x 1.5 ...........3/8SFDKL90-2208 ... M22 x 1.5 ...........1/2SFDKL90-2608 ... M26 x 1.5 ...........1/2SFDKL90-2610 ... M26 x 1.5 ...........5/8SFDKL90-3012 ... M30 x 2.0 ...........3/4SFDKL90-3616 ... M36 x 2.0 .............. 1SFDKL90-4520 ... M45 x 2.0 ........1-1/4

Straight Male DINLight Series

P/Number............. Thread .............HoseSMDKL-1204...... M12 x 1.5 ...........1/4SMDKL-1404...... M14 x 1.5 ...........1/4SMDKL-1406...... M14 x 1.5 ...........3/8SMDKL-1604...... M16 x 1.5 ...........1/4SMDKL-1606...... M16 x 1.5 ...........3/8SMDKL-1804...... M18 x 1.5 ...........1/4SMDKL-1806...... M18 x 1.5 ...........3/8SMDKL-1808...... M18 x 1.5 ...........1/2SMDKL-2206...... M22 x 1.5 ...........3/8SMDKL-2208...... M22 x 1.5 ...........1/2SMDKL-2608...... M26 x 1.5 ...........1/2SMDKL-2610...... M26 x 1.5 ...........5/8SMDKL-3012...... M30 x 2.0 ...........3/4SMDKL-3616...... M36 x 2.0 .............. 1

FRENCH GAZStraight Male

P/Number................... Thread .......HoseSMGAZ-3012 ............ M30 ..............3/4SMGAZ-3612 ............ M36 ..............3/4SMGAZ-3616 ............ M36 .................1SMGAZ-4516 ............ M45 .................1

FRENCH GAZStraight Female

P/Number................... Thread .......HoseSFGAZ-3010 ............. M30 ..............5/8SFGAZ-3012 ............. M30 ..............3/4


Section 3Super- & Hammer-Crimp Couplings

Straight MaleStaplelock System

P/Number................... StapleHose1/41/4SSS-1004 ................... 3/8.................1/4SSS-1006 ................... 3/8.................3/8SSS-1308 ................... 1/2.................1/290 Duro O Ring & Anti-extrusion Washer supplied

Hammer-Crimp FerruleNon-Skive

Suits EFG4K

P/Number ................... ..................HoseFNH-16....................... ........................ 1FNH-20....................... ..................1-1/4

Straight Female BSPPHammer Coupling

P/Number ...................Thread .......HoseHFB-1616...................1 ...................... 1HFB-2020...................1-1/4..........1-1/4

The HAMMER COUPLING is especiallydesigned to withstand very heavy and continuous pressure spikes such as isexperienced in hammer systems



Straight SAE O-RingFlange Code 61

P/Number ...................Flange ....... HoseSFL-0808 ...................1/2 ................ 1/2SFL-1208 ...................3/4 ................ 1/2SFL-1212 ...................3/4 ................ 3/4SFL-1612 ...................1 ................... 3/4SFL-1616 ...................1 ...................... 1SFL-2012 ...................1-1/4............. 3/4SFL-2016 ...................1-1/4................ 1SFL-2020 ...................1-1/4..........1-1/4SFL-2416 ...................1-1/2................ 1SFL-2420 ...................1-1/2..........1-1/4SFL-2424 ...................1-1/2..........1-1/2SFL-3224 ...................2 ................1-1/2SFL-3232 ...................2 ...................... 2SFL-4032 ...................2-1/2................ 290 Duro O Ring supplied

Straight Komatsu O-Ring Flange

P/Number ...................Flange ....... HoseSFLK-1008.................5/8 ...... 1/25/85/8SFLK-1012.................5/8 ................ 3/490 Duro O Ring supplied

22-1/2° SAE O-Ring FlangeCode 61

P/Number ...................Flange ....... HoseSFL22-0808 ...............1/2 ................ 1/2SFL22-1208 ...............3/4 ................ 1/2SFL22-1212 ...............3/4 ................ 3/4SFL22-1612 ...............1 ................... 3/4SFL22-1616 ...............1 ...................... 1SFL22-2016 ...............1-1/4................ 1SFL22-2020 ...............1-1/4..........1-1/4SFL22-2420 ...............1-1/2..........1-1/4SFL22-2424 ...............1-1/2..........1-1/2SFL22-3224 ...............2 ................1-1/2SFL22-3232 ...............2 ...................... 290 Duro O Ring supplied

30° SAE FlangeCode 61

P/Number....................Flange........Hose* SFL30-0808................1/2 ................1/2

SFL30-1208................3/4 ................1/2SFL30-1212................3/4 ................3/4SFL30-1612................1 ...................3/4SFL30-1616................1 ...................... 1SFL30-2016................1-1/4 ................ 1SFL30-2020................1-1/4 ..........1-1/4SFL30-2420................1-1/2 ..........1-1/4SFL30-2424................1-1/2 ..........1-1/2SFL30-3224................2 ................1-1/2SFL30-3232................2 ...................... 290 Duro O Ring supplied


P/Number....................Flange........HoseSFL45-0808................1/2 ................1/2SFL45-1208................3/4 ................1/2SFL45-1212................3/4 ................3/4SFL45-1612................1 ...................3/4SFL45-1616................1 ...................... 1SFL45-2016................1-1/4 ................ 1SFL45-2020................1-1/41-1/41-1/21SFL45-2420................1-1/2 ..........1-1/4SFL45-2424................1-1/2 ..........1-1/2SFL45-2432................1-1/2 ................ 2SFL45-3224................2 ................1-1/2SFL45-3232................2 ...................... 2SFL45-4032................2-1/2 ................ 290 Duro O Ring supplied

45° KomatsuO-Ring Flange

P/Number....................Flange........HoseSFLK45-1008.............5/8 ................1/2SFLK45-1012.............5/8 ................3/4

60° SAE O-Ring FlangeCode 61

P/Number................... Flange........HoseSFL60-0808 ............... 1/2.................1/2SFL60-1208 ............... 3/4.................1/2SFL60-1212 ............... 3/4.................3/4SFL60-1612 ............... 1....................3/4SFL60-1616 ............... 1.......................1SFL60-2016 ............... 1-1/4 ................1SFL60-2020 ............... 1-1/4 ......... 1-1/4SFL60-2420 ............... 1-1/2 ......... 1-1/4SFL60-2424 ............... 1-1/2 ......... 1-1/2SFL60-3224 ............... 2................ 1-1/2SFL60-3232 ............... 2.......................290 Duro O Ring supplied

67° SAE O-Ring FlangeCode 61

P/Number................... Flange........HoseSFL67-0808 ............... 1/2.................1/2SFL67-1208 ............... 3/4.................1/2SFL67-1212 ............... 3/4.................3/4SFL67-1612 ............... 1....................3/4

* SFL67-1616 ............... 1.......................1SFL67-2016 ............... 1-1/4 ................1SFL67-2020 ............... 1-1/4 ......... 1-1/4SFL67-2420 ............... 1-1/2 ......... 1-1/4SFL67-2424 ............... 1-1/2 ......... 1-1/2SFL67-3224 ............... 2................ 1-1/2SFL67-3232 ............... 2.......................290 Duro O Ring supplied




P/Number................... Flange........HoseSFL90-0808 ............... 1/2.................1/2SFL90-1208 ............... 3/4.................1/2SFL90-1212 ............... 3/4.................3/4SFL90-1612 ............... 1....................3/4SFL90-1616 ............... 1.......................1SFL90-1620 ............... 1................ 1-1/4SFL90-2012 ............... 1-1/4 .............3/4SFL90-2016 ............... 1-1/4 ................1SFL90-2020 ............... 1-1/4 ......... 1-1/4SFL90-2024 ............... 1-1/4 ......... 1-1/2SFL90-2416 ............... 1-1/2 ................1SFL90-2420 ............... 1-1/2 ......... 1-1/4SFL90-2424 ............... 1-1/2 ......... 1-1/2SFL90-3224 ............... 2................ 1-1/2SFL90-3232 ............... 2.......................2SFL90-4032 ............... 2-1/2 ................290 Duro O Ring supplied

90° KomatsuO-Ring Flange

P/Number................... Flange........HoseSFLK90-1008 ............ 5/8.................1/2SFLK90-1012 ............ 5/8.................3/4

90° SAE FlangeLong Drop Code 61

P/Number................... Flange........HoseSFL90L-1212/96........ 3/4.................3/4SFL90L-1616/118...... 1.......................1SFL90L-2016/118...... 1-1/4 ................1SFL90L-2020/91........ 1-1/4 ......... 1-1/4SFL90L-2020/130...... 1-1/4 ......... 1-1/4SFL90L-2420/130...... 1-1/2 ......... 1-1/4SFL90L-2424/148...... 1-1/2 ......... 1-1/2SFL90L-3232/203...... 2.......................290 Duro O Ring supplied


P/Number ...................Flange ....... HoseSFL110-1212 .............3/4 ................ 3/4SFL110-1616 .............1 ...................... 1SFL110-2016 .............1-1/4................ 1SFL110-2020 .............1-1/4.......... 1-1/4SFL110-2420 .............1-1/2.......... 1-1/4SFL110-2424 .............1-1/2.......... 1-1/2SFL110-3232 .............2 ...................... 2



P/Number ...................Flange ....... HoseSFL135-1212 .............3/4 ................ 3/4SFL135-2424 .............2 ...................... 2SFL135-3232 .............2 ...................... 290 Duro O Ring supplied

Straight SAE FlangeCode 62

P/Number ...................Flange ....... HoseSFLH-0808.................1/2 ................ 1/2SFLH-1212.................3/4 ................ 3/4SFLH-1612.................1 ................... 3/4SFLH-1616.................1 ...................... 1SFLH-2016.................1-1/4................ 1SFLH-2020.................1-1/4.......... 1-1/4SFLH-2424.................1-1/2.......... 1-1/2SFLH-3224.................2 ................ 1-1/2SFLH-3232.................2 ...................... 290 Duro O Ring supplied


P/Number ...................Flange .......HoseSFLH45-0808.............1/2 ................ 1/2SFLH45-1212.............3/4 ................ 3/4SFLH45-1612.............1 ................... 3/4SFLH45-1616.............1 ...................... 1SFLH45-2016.............1-1/4................ 1SFLH45-2020.............1-1/4..........1-1/4SFLH45-2024.............1-1/4..........1-1/2SFLH45-2420.............1-1/2..........1-1/4SFLH45-2424.............1-1/2..........1-1/2SFLH45-3224.............2 ................1-1/2SFLH45-3232.............2 ...................... 290 Duro O Ring supplied


P/Number ...................Flange .......HoseSFLH90-0808.............1/2 ................ 1/2SFLH90-1212.............3/4 ................ 3/4SFLH90-1216............. ..........................SFLH90-1612.............1 ................... 3/4SFLH90-1616.............1 ...................... 1SFLH90-1620.............1 ................1-1/4SFLH90-2016.............1-1/4................ 1SFLH90-2020.............1-1/4..........1-1/4SFLH90-2024.............1-1/4..........1-1/2SFLH90-2420.............1-1/2..........1-1/4SFLH90-2424.............1-1/2..........1-1/2SFLH90-3224.............2 ................1-1/2SFLH90-3232.............2 ...................... 290 Duro O Ring supplied


Section 3Ezi-Crimp Couplings - One Piece

Straight Male BSPT

P/Number ...................Thread....... HoseEMB-0204..................1/8 ................ 1/4EMB-0404..................1/4 ................ 1/4EMB-0406..................1/4 ................ 3/8EMB-0604..................3/8 ................ 1/4EMB-0606..................3/8 ................ 3/8EMB-0806..................1/2 ................ 3/8EMB-0808..................1/2 ................ 1/2EMB-1210..................3/4 ................ 5/8

Straight Male BSPPEncapsulated Seal

Included in the price

P/Number ...................Thread....... HoseEMR-0604..................3/8 ................ 1/4EMR-0606..................3/8 ................ 3/8EMR-0806..................1/2 ................ 3/8EMR-0808..................1/2 ................ 1/2


P/Number ...................Thread....... HoseEFB-0204H ................1/8 ................ 1/4EFB-0404H ................1/4 ................ 1/4EFB-0604H ................3/8 ................ 1/4EFB-0606H ................3/8 ................ 3/8EFB-0806H ................1/2 ................ 3/8EFB-0808H ................1/2 ................ 1/2EFB-1008H ................5/8 ................ 1/2EFB-1210 ...................3/4 ................ 5/8EFB-1212H ................3/4 ................ 3/4


P/Number....................Thread .......HoseEFB90-0404 ...............1/4 ................1/4EFB90-0606 ...............3/8 ................3/8EFB90-0808 ...............1/2 ................1/2EFB90-1210 ...............3/4 ................5/8EFB90-1212 ...............3/4 ................3/4


P/Number....................Thread .......HoseEFB90C-0404.............1/4 ................1/4EFB90C-0604.............3/8 ................1/4EFB90C-0606.............3/8 ................3/8EFB90C-0808.............1/2 ................1/2EFB90C-1212.............3/4 ................3/4

Straight Male NPTSuit Porta-Power Hoses

P/Number....................Thread .......HoseEMNL-0604 ...............3/8 ................1/4

Straight Male JIC

P/Number....................Thread .......HoseEMJ-0704 ...................7/16 ..............1/4EMJ-0904 ...................9/16 ..............1/4EMJ-0906 ...................9/16 ..............3/8EMJ-1204 ...................3/4 ................1/4EMJ-1206 ...................3/4 ................3/8EMJ-1208 ...................3/4 ................1/2EMJ-1408 ...................7/8 ................1/2EMJ-1410 ...................7/8 ................5/8EMJ-1708 ...................1-1/16 ...........1/2EMJ-1710 ...................1-1/16 ...........5/8


P/Number................... Thread .......HoseEFJ-0704H................. 7/16...............1/4EFJ-0804H................. 1/2.................1/4EFJ-0904H................. 9/16...............1/4EFJ-0906H................. 9/16...............3/8EFJ-0908H................. 9/16...............1/2EFJ-1206H................. 3/4.................3/8EFJ-1208H................. 3/4.................1/2EFJ-1406H................. 7/8.................3/8EFJ-1408H................. 7/8.................1/2EFJ-1410H................. 7/8.................5/8EFJ-1412H................. 7/8.................3/4EFJ-1708H................. 1-1/16 ...........1/2EFJ-1710H................. 1-1/16 ...........5/8EFJ-1712H................. 1-1/16 ...........3/4EFJ-2112H................. 1-5/16 ...........3/4


P/Number................... Thread .......HoseEFJ45-0704................ 7/16...............1/4EFJ45-0904................ 9/16...............1/4EFJ45-0906................ 9/16...............3/8EFJ45-1206................ 3/4.................3/8EFJ45-1208................ 3/4.................1/2EFJ45-1408................ 7/8.................1/2EFJ45-1410................ 7/8.................5/8EFJ45-1710................ 1-1/16 ...........5/8EFJ45-1712................ 1-1/16 ...........3/4


P/Number................... Thread .......HoseEFJ90-0704................ 7/16...............1/4EFJ90-0804................ 1/2.................1/4EFJ90-0904................ 9/16...............1/4EFJ90-0906................ 9/16...............3/8EFJ90-0908................ 9/16...............1/2EFJ90-1206................ 3/4.................3/8EFJ90-1208................ 3/4.................1/2EFJ90-1406................ 7/8.................3/8EFJ90-1408................ 7/8.................1/2EFJ90-1410................ 7/8.................5/8EFJ90-1710................ 1-1/16 ...........5/8EFJ90-1712................ 1-1/16 ...........3/4EFJ90-2112................ 1-5/16 ...........3/4


Section 3Ezi-Crimp Couplings - One Piece

90° Tube Female JICLong Drop Swivel

P/Number................... Thread .......HoseEFJ90L-0704 ............. 7/16...............1/4EFJ90L-0904 ............. 9/16...............1/4EFJ90L-1206 ............. 3/4.................3/8EFJ90L-1208 ............. 3/4.................1/2EFJ90L-1408 ............. 7/8.................1/2EFJ90L-1408Z........... 7/8.................1/2EFJ90L-1410 ............. .................7/85/8


P/Number................... Thread .......HoseEFJ90C-0704 ............. 7/16...............1/4EFJ90C-0904 ............. 9/16...............1/4EFJ90C-0906 ............. 9/16...............3/8EFJ90C-1206 ............. 3/4.................3/8EFJ90C-1208 ............. 3/4.................1/2EFJ90C-1408 ............. 7/8.................1/2EFJ90C-1712 ............. 1-1/16 ...........3/4

Straight Female Flat Faced O-Ring (ORFS)

Swivel

P/Number................... Thread .......HoseEFFO-0904 ................ 9/16...............1/4EFFO-1104 ................ 11/16.............1/4EFFO-1106 ................ 11/16.............3/8EFFO-1308 ................ 13/16.............1/2

45° Tube Female Flat Faced O-Ring (ORFS)

Swivel

P/Number ...................Thread....... HoseEFFO45-0904.............9/16 .............. 1/4


Swivel

P/Number ...................Thread....... HoseEFFO90S-0904 .......... 9/16 .............. 1/4EFFO90S-1104 .......... 11/16............ 1/4EFFO90S-1106 .......... 11/16............ 3/8EFFO90S-1308 .......... 13/16............ 1/2

Section 3 Global-Crimp GS & GSP Couplings - Two Piece

*Supply To Order - Minimum Order Quantities May Apply 3.19

Global Spiral Ferrules(Non-Skive)

C12M, C12M-MTF, EFG4K,G5K, G6K

P/Number ................... .................. Hose6GS1F-4 ..................... ..................... 3/88GS1F-4 ..................... ..................... 1/210GS1F-4 ................... ..................... 5/812GS1F-4 ................... ..................... 3/416GS1F-4 ................... ........................ 120GS1F-4 ................... ..................1-1/420GS1F-6 ................... ..................1-1/424GS1F ...................... ..................1-1/224GSP1F-2................. ..................1-1/224GSP1F-4................. ..................1-1/232GSP1F-2................. ........................ 232GSP1F-4................. ........................ 2

Male O-Ring Boss

P/Number ...................Thread....... Hose6GS-6MB ...................9/16 .............. 3/88GS-8MB ...................3/4 ................ 1/28GS-10MB .................7/8 ................ 1/210GS-10MB ...............7/8 ................ 5/810GS-12MB ...............1-1/16........... 5/812GS-12MB ...............1-1/16........... 3/412GS-16MB ...............1-5/16........... 3/416GS-16MB ...............1-5/16.............. 1

Male PipeNPTF 30° Cone Seat

P/Number ...................Thread....... Hose6GS-6MP ...................3/8 ................ 3/86GS-8MP ...................1/2 ................ 3/88GS-8MP ...................1/2 ................ 1/28GS-12MP .................3/4 ................ 1/210GS-8MP .................1/2 ................ 5/810GS-12MP ...............3/4 ................ 5/812GS-12MP ...............3/4 ................ 3/412GS-16MP ...............1 ................... 3/416GS-12MP ...............3/4 ................... 116GS-16MP ...............1 ...................... 116GS-20MP ...............1-1/4................ 120GS-20MP ...............1-1/4..........1-1/424GSP-24MP .............1-1/2..........1-1/232GSP-32MP .............2 ...................... 2

Male British Standard PipeParallel

P/Number....................Thread .......Hose6GS-6MBSPP.............3/8 ................3/86GS-8MBSPP.............1/2 ................3/88GS-8MBSPP.............1/2 ................1/210GS-10MBSPP.........5/8 ................5/810GS-12MBSPP.........3/4 ................5/812GS-12MBSPP.........3/4 ................3/416GS-16MBSPP.........1 ...................... 120GS-20MBSPP.........1-1/4 ..........1-1/4

Female British Standard PipeParallel O-Ring Swivel

P/Number....................Thread .......Hose6GS-6FBSPORX........3/8 ................3/86GS-8FBSPORX........1/2 ................3/88GS-8FBSPORX........1/2 ................1/28GS-10FBSPORX......5/8 ................1/210GS-10FBSPORX....5/8 ................5/810GS-12FBSPORX....3/4 ................5/812GS-12FBSPORX....3/4 ................3/416GS-16FBSPORX....1 ...................... 120GS-20FBSPORX....1-1/4 ..........1-1/424GSP-24FBSPORX..1-1/2 ..........1-1/232GSP-32FBSPORX..2 ...................... 2


45° Bent Tube

P/Number.......................Thread....Hose6GS-6FBSPORX45.......3/8 .............3/88GS-8FBSPORX45.......1/2 .............1/210GS-10FBSPORX45...5/8 .............5/810GS-12FBSPORX45...3/4 .............5/812GS-12FBSPORX45...3/4 .............3/416GS-16FBSPORX45...1 ................... 120GS-20FBSPORX45...1-1/4.......1-1/424GSP-24FBSPORX45.1-1/2.......1-1/232GSP-32FBSPORX45 2................... 2


90° Bent Tube

P/Number..................... Thread .....Hose6GS-6FBSPORX90 ..... 3/8...............3/88GS-8FBSPORX90 ..... 1/2...............1/210GS-10FBSPORX90 . 5/8...............5/810GS-12FBSPORX90 . 3/4...............5/812GS-12FBSPORX90 . 3/4...............3/416GS-16FBSPORX90 . 1.....................120GS-20FBSPORX90 . 1-1/4 ....... 1-1/424GSP-24FBSPORX901-1/2 ....... 1-1/232GSP-32FBSPORX90 2..................2

Male JIC 37° Flare

P/Number................... Thread .......Hose6GS-6MJ.................... 9/16...............3/86GS-8MJ.................... 3/4.................3/86GS-10MJ.................. 7/8.................3/88GS-8MJ.................... 3/4.................1/28GS-10MJ.................. 7/8.................1/210GS-10MJ................ 7/8.................5/810GS-12MJ................ 1-1/16 ...........5/812GS-12MJ................ 1-1/16 ...........3/412GS-14MJ................ 1-3/16 ...........3/412GS-16MJ................ 1-5/16 ...........3/416GS-16MJ................ 1-5/16 ..............116GS-20MJ................ 1-5/8 ................120GS-20MJ................ 1-5/8 ......... 1-1/424GSP-20MJ.............. 1-5/8 ......... 1-1/224GSP-24MJ.............. 1-7/8 ......... 1-7/832GSP-32MJ.............. 2-1/2 ................2

Section 3Global-Crimp GS & GSP Couplings - Two Piece

3.20 *Supply To Order - Minimum Order Quantities May Apply

Female JIC 37° Flare Swivel

P/Number................... Thread .......Hose6GS-6FJX .................. 9/16...............3/86GS-8FJX .................. 3/4.................3/88GS-8FJX .................. 3/4.................1/28GS-10FJX ................ 7/8.................1/28GS-12FJX ................ 1-1/16 ...........1/210GS-10FJX .............. 7/8.................5/810GS-12FJX .............. 1-1/16 ...........5/812GS-10FJX .............. 7/8.................3/412GS-12FJX .............. 1-1/16 ...........3/412GS-14FJX .............. 1-3/16 ...........3/412GS-16FJX .............. 1-5/16 ...........3/416GS-12FJX .............. 1-1/16 ..............116GS-14FJX .............. 1-3/16 ..............116GS-16FJX .............. 1-5/16 ..............116GS-20FJX .............. 1-5/8 ................120GS-16FJX .............. 1-5/16 ....... 1-1/420GS-20FJX .............. 1-5/8 ......... 1-1/420GS-24FJX .............. 1-7/8 ......... 1-1/424GSP-24FJX............ 1-7/8 ......... 1-1/224GSP-32FJX............ 2-1/2 ......... 1-1/232GSP-32FJX............ 2-1/2 ................2

Female JIC 37° Flare Swivel45° Bent Tube

P/Number................... Thread .......Hose6GS-6FJX45S............ 9/16...............3/86GS-8FJX45S............ 3/4.................3/88GS-8FJX45S............ 3/4.................1/28GS-10FJX45S.......... 7/8.................1/210GS-10FJX45S........ 7/8.................5/810GS-12FJX45S........ 1-1/16 ...........5/812GS-12FJX45S........ 1-1/16 ...........3/412GS-16FJX45S........ 1-5/16 ...........3/416GS-16FJX45S........ 1-5/16 ..............116GS-20FJX45S........ 1-5/8 ................120GS-20FJX45-038... 1-5/8 ......... 1-1/424GSP-24FJX45-050. 1-7/8 ......... 1-1/2


P/Number ...................Thread....... Hose6GS-6FJX90S ............ 9/16 .............. 3/86GS-6FJX90L ............ 9/16 .............. 3/86GS-8FJX90M...........3/4 ................ 3/88GS-8FJX90S ............ 3/4 ................ 1/28GS-8FJX90M...........3/4 ................ 1/28GS-8FJX90L ............ 3/4 ................ 1/28GS-10FJX90S .......... 7/8 ................ 1/28GS-10FJX90M.........7/8 ................ 1/28GS-10FJX90L .......... 7/8 ................ 1/28GS-12FJX90S .......... 1-1/16........... 1/210GS-10FJX90S ........7/8 ................ 5/810GS-12FJX90M....... 1-1/16........... 5/812GS-12FJX90S ........1-1/16........... 3/412GS-12FJX90M....... 1-1/16........... 3/412GS-12FJX90L ........1-1/16........... 3/412GS-14FJX90-060 ...1-3/16........... 3/412GS-16FJX90S ........1-5/16........... 3/412GS-16FJX90M....... 1-5/16........... 3/416GS-16FJX90S ........1-5/16.............. 116GS-16FJX90M....... 1-5/16.............. 116GS-16FJX90L ........1-5/16.............. 116GS-20FJX90L ........1-5/8................ 120GS-20FJX90S ........1-5/8.......... 1-1/420GS-20FJX90M....... 1-5/8.......... 1-1/420GS-20FJX90L ........1-5/8.......... 1-1/424GSP-24FJX90-118 .1-7/8.......... 1-1/224GSP-24FJX90-089 .1-7/8.......... 1-1/232GSP-32FJX90M..... 2-1/2................ 2

Male Flat Face O-Ring

P/Number ...................Thread....... Hose6GS-6MFFOR............ 11/16............ 3/88GS-8MFFOR............ 13/16............ 1/212GS-12MFFOR........1-3/16........... 3/412GS-16MFFOR........1-7/16........... 3/416GS-16MFFOR........1-7/16.............. 120GS-20MFFOR........1-11/16...... 1-1/4

Female Flat Face Swivel

P/Number ...................Thread .......Hose6GS-6FFORX.............11/16 ............ 3/86GS-8FFORX.............13/16 ............ 3/88GS-8FFORX.............13/16 ............ 1/28GS-10FFORX...........1 ................... 1/28GS-12FFORX...........1-3/16........... 1/210GS-10FFORX.........1 ................... 5/812GS-10FFORX.........1 ................... 3/412GS-12FFORX.........1-3/16........... 3/412GS-16FFORX.........1-7/16........... 3/416GS-16FFORX.........1-7/16.............. 116GS-20FFORX.........1-11/16............ 120GS-20FFORX.........1-11/16......1-1/424GSP-24FFORX ......2 ................1-1/2

Female Flat Face Swivel45° Bent Tube

P/Number ...................Thread .......Hose6GS-6FFORX45S ......11/16 ............ 3/86GS-8FFORX45S ......13/16 ............ 3/88GS-8FFORX45S ......13/16 ............ 1/28GS-10FFORX45S ....1 ................... 1/210GS-10FFORX45S ..1 ................... 5/812GS-12FFORX45S ..1-3/16........... 3/412GS-16FFORX45S ..1-7/16........... 3/416GS-16FFORX45S ..1-7/16.............. 116GS-20FFORX45S ..1-11/16............ 120GS-20FFORX45S ..1-11/16......1-1/424GSP-24FFORX45-036 2 .........1-1/2




P/Number ...................Thread....... Hose6GS-6FFORX90S ......11/16 ............ 3/86GS-6FFORX90L......11/16 ............ 3/86GS-8FFORX90M.....13/16 ............ 3/88GS-8FFORX90S ......13/16 ............ 1/28GS-8FFORX90-083 .13/16 ............ 1/28GS-10FFORX90M...1 ................... 1/28GS-12FFORX90S ....1-3/16........... 1/210GS-10FFORX90M.1 ................... 5/810GS-10FFORX90L..1 ................... 5/812GS-10FFORX90S ..1 ................... 3/412GS-12FFORX90S ..1-3/16........... 3/412GS-12FFORX90M.1-3/16........... 3/412GS-12FFORX90L..1-3/16........... 3/412GS-16FFORX90S ..1-7/16........... 3/412GS-16FFORX90L..1-7/16........... 3/416GS-16FFORX90S ..1-7/16.............. 116GS-16FFORX90M.1-7/16.............. 116GS-16FFORX90L..1-7/16.............. 116GS-20FFORX90M.1-11/16............ 120GS-20FFORX90S ..1-11/16......1-1/420GS-20FFORX90M.1-11/16......1-1/420GS-20FFORX90L..1-11/16......1-1/424GSP-24FFORX90M 2.............1-1/224GSP-24FFORX90L 2 .............1-1/2

Male 24° Cone - Heavy Series

P/Number .............Thread ............. Hose6GS-12MDH........M20 x 1.5........... 3/86GS-14MDH........M22 x 1.5........... 3/88GS-16MDH........M24 x 1.5........... 1/210GS-20MDH......M30 x 2.0........... 5/812GS-20MDH......M30 x 2.0........... 3/412GS-25MDH......M36 x 2.0........... 3/412GS-30MDH......M42 x 2.0........... 3/416GS-25MDH......M36 x 2.0.............. 116GS-30MDH......M42 x 2.0.............. 120GS-38MDH......M52 x .20........1-1/4

Female DIN 24° Cone SwivelHeavy Series With O-Ring

P/Number....................Thread .......Hose6GS-12FDHORX .......M20 x 1.5.....3/86GS-14FDHORX .......M22 x 1.5.....3/88GS-14FDHORX .......M22 x 1.5.....1/28GS-16FDHORX .......M24 x 1.5.....1/28GS-20FDHORX .......M30 x 2.0.....1/210GS-20FDHORX .....M30 x 2.0.....5/810GS-25FDHORX .....M36 x 2.0.....5/812GS-20FDHORX .....M30 x 2.0.....3/412GS-25FDHORX .....M36 x 2.0.....3/416GS-25FDHORX .....M36 x 2.0........ 116GS-30FDHORX .....M42 x 2.0........ 120GS-38FDHORX .....M52 x 2.0..1-1/424GS-38FDHORX .....M52 x 2.0..1-1/2


45° Bent Tube

P/Number....................Thread .......Hose6GS-12FDHORX45 ...M20 x 1.5.....3/86GS-14FDHORX45 ...M22 x 1.5.....3/88GS-16FDHORX45 ...M24 x 1.5.....1/210GS-20FDHORX45 .M30 x 2.0.....5/812GS-20FDHORX45 .M30 x 2.0.....3/412GS-25FDHORX45 .M36 x 2.0.....3/416GS-25FDHORX45 .M36 x 2.0........ 116GS-30FDHORX45 .M42 x 2.0........ 120GS-38FDHORX45 .M52 x 2.0..1-1/4


90° Bent Tube

P/Number........................Thread...Hose6GS-12FDHORX90 .......M20..........3/86GS-14FDHORX90 .......M22..........3/88GS-16FDHORX90M....M24..........1/210GS-20FDHORX90M..M30..........5/812GS-20FDHORX90M..M30..........3/412GS-25FDHORX90M..M36..........3/416GS-25FDHORX90M..M36..........3/416GS-30FDHORX90M..M42.............120GS-38FDHORX90 .....M52...... 1-1/4



Code 61 O-Ring Flange

P/Number................... Flange........Hose6GS-8FL .................... 1/2.................3/88GS-8FL .................... 1/2.................1/28GS-12FL .................. 3/4.................1/28GS-10FLK ............... 5/8.................1/210GS-10FLK ............. 5/8.................5/810GS-12FL ................ 3/4.................5/812GS-8FL .................. 1/2.................3/412GS-10FLK ............. 5/8.................3/412GS-12FL ................ 3/4.................3/412GS-16FL ................ 1....................3/412GS-20FL ................ 1-1/4 .............3/416GS-16FL ................ 1.......................116GS-20FL ................ 1-1/4 ................116GS-24FL ................ 1-1/2 ................120GS-16FL ................ 1................ 1-1/420GS-20FL ................ 1-1/4 ......... 1-1/420GS-24FL ................ 1-1/2 ......... 1-1/424GSP-20FL.............. 1-1/4 ......... 1-1/224GSP-24FL.............. 1-1/2 ......... 1-1/224GSP-32FL.............. 2................ 1-1/232GSP-24FL.............. 1-1/2 ................232GSP-32FL.............. 2.......................232GSP-40FL.............. 2-1/2 ................2

Code 61 O-Ring Flange22.5° Bent Tube

P/Number................... Flange........Hose8GS-8FL22M............. 1/2.................1/212GS-12FL22M......... 3/4.................3/412GS-16FL22M......... 1....................3/416GS-16FL22M......... 1.......................116GS-20FL22M......... 1-1/4 ................120GS-20FL22M......... 1-1/4 ......... 1-1/420GS-24FL22M......... 1-1/2 ......... 1-1/424GSP-24FL22M ...... 1-1/2 ......... 1-1/224GSP-32FL22M ...... 2................ 1-1/232GSP-32FL22M ...... 2.......................2

Code 61 O-Ring Flange30° Bent Tube

P/Number................... Flange........Hose8GS-12FL30M........... 3/4.................1/212GS-12FL30M......... 3/4.................3/412GS-16FL30M......... 1....................3/416GS-16FL30M......... 1.......................116GS-20FL30M......... 1-1/4 ................120GS-20FL30M......... 1-1/4 ......... 1-1/420GS-24FL30M......... 1-1/2 ......... 1-1/424GSP-24FL30S........ 1-1/2 ......... 1-1/224GSP-32FL30M ...... 2................ 1-1/232GSP-32FL30M ...... 2.......................2


P/Number ...................Flange ....... Hose6GS-8FL45M.............1/2 ................ 3/88GS-8FL45M.............1/2 ................ 1/28GS-12FL45M...........3/4 ................ 1/210GS-10FLK45-026 ..5/8 ................ 5/810GS-12FL45M.........3/4 ................ 5/812GS-12FL45M.........3/4 ................ 3/412GS-16FL45S .......... 1 ................... 3/416GS-16FL45M.........1 ...................... 116GS-20FL45M.........1-1/4................ 120GS-16FL45M.........1 ................ 1-1/420GS-20FL45S .......... 1-1/4.......... 1-1/420GS-24FL45S .......... 1-1/2.......... 1-1/424GSP-24FL45S ........1-1/2.......... 1-1/224GSP-32FL45S ........2 ................ 1-1/232GSP-24FL45S ........1-1/2................ 232GSP-32FL45\ .........2 ...................... 2


P/Number ...................Flange ....... Hose8GS-8FL60M.............1/2 ................ 1/212GS-12FL60M.........3/4 ................ 3/412GS-16FL60M.........1 ................... 3/416GS-16FL60M.........1 ...................... 116GS-20FL60M.........1-1/4................ 120GS-20FL60M.........1-1/4.......... 1-1/420GS-24FL60M.........1-1/2.......... 1-1/424GSP-24FL60S ........1-1/2.......... 1-1/224GSP-32FL60S ........2 ................ 1-1/232GSP-32FL60S ........2 ...................... 2


P/Number ...................Flange ....... Hose12GS-12FL67M.........3/4 ................ 3/412GS-16FL67M.........1 ................... 3/416GS-16FL67M.........1 ...................... 116GS-20FL67M.........1-1/4................ 120GS-20FL67M.........1-1/4.......... 1-1/424GSP-24FL67S ........1-1/2.......... 1-1/224GSP-32FL67S ........2 ................ 1-1/232GSP-32FL67S ........2 ...................... 2


P/Number ...................Flange .......Hose6GS-8FL90M .............1/2 ................ 3/88GS-8FL90M .............1/2 ................ 1/28GS-8FL90L ..............1/2 ................ 1/28GS-12FL90M ...........3/4 ................ 1/210GS-10FLK90-055...5/8 ................ 5/810GS-12FL90M .........3/4 ................ 5/812GS-8FL90-050 .......1/2 ................ 3/412GS-10FLK90-055...5/8 ................ 3/412GS-12FL90M .........3/4 ................ 3/412GS-12FL90-100 .....3/4 ................ 3/412GS-12FL90-125 .....3/4 ................ 3/412GS-16FL90S...........1 ................... 3/412GS-16FL90M .........1 ................... 3/412GS-20FL90-054 .....1-1/4............. 3/416GS-16FL90S...........1 ...................... 116GS-16FL90M .........1 ...................... 116GS-16FL90-120 .....1 ...................... 116GS-20FL90S...........1-1/4................ 116GS-20FL90M .........1-1/4................ 116GS-24FL90S...........1-1/2................ 116GS-24FL90-060 .....1-1/2................ 120GS-16FL90M .........1 ................1-1/420GS-20FL90S...........1-1/4..........1-1/420GS-20FL90M .........1-1/4..........1-1/420GS-20FL90-168 .....1-1/4..........1-1/420GS-24FL90S...........1-1/2..........1-1/420GS-24FL90-118 .....1-1/2..........1-1/424GSP-24FL90M .......1-1/2..........1-1/224GSP-32FL90-080 ...2 ................1-1/224GSP-32FL90-170 ...2 ................1-1/232GSP-24FL90S ........1-1/2................ 232GSP-32FL90-114 ...2 ...................... 232GSP-32FL90-165 ...2 ...................... 232GSP-32FL90-200 ...2 ...................... 232GSP-40FL90-110 ...2-1/2................ 2


P/Number ...................Flange .......Hose12GS-12FL110-064 ...3/4 ................ 3/416GS-16FL110-073 ...1 ...................... 120GS-20FL110-080 ...1-1/4..........1-1/420GS-24FL110-080 ...1-1/2..........1-1/424GSP-24FL110-094 .1-1/2..........1-1/232GSP-32FL110.........2 ...................... 2



Code 62 O-Ring Flange Heavy

P/Number ...................Flange ....... Hose8GS-8FLH..................1/2 ................ 1/28GS-12FLH................3/4 ................ 1/210GS-8FLH................1/2 ................ 5/812GS-12FLH..............3/4 ................ 3/412GS-16FLH..............1 ................... 3/416GS-12FLH..............3/4 ................... 116GS-16FLH..............1 ...................... 116GS-20FLH..............1-1/4................ 120GS-16FLH..............1 ................1-1/420GS-20FLH..............1-1/4..........1-1/420GS-24FLH..............1-1/2..........1-1/424GSP-24FLH ...........1-1/2..........1-1/224GSP-32FLH ...........2 ................1-1/232GSP-32FLH ...........2 ...................... 2

Code 62 O-Ring Flange Heavy22.5° Bent Tube

P/Number ...................Flange ....... Hose16GS-16FLH22M ......1 ...................... 120GS-20FLH22M ......1-1/4..........1-1/420GS-24FLH22M ......1-1/2..........1-1/4

Code 62 O-Ring Flange Heavy30° Bent Tube

P/number ....................Flange ....... Hose16GS-16FLH30M ......1 ...................... 120GS-20FLH30M ......1-1/4..........1-1/420GS-24FLH30M ......1-1/2..........1-1/4


P/number ....................Flange........Hose8GS-8FLH45M ..........1/2 ................1/28GS-12FLH45M ........3/4 ................1/210GS-12FLH45M ......3/4 ................5/812GS-12FLH45M ......3/4 ................3/412GS-16FLH45M ......1 ...................3/416GS-16FLH45M ......1 ...................... 116GS-20FLH45M ......1-1/4 ................ 120GS-20FLH45M ......1-1/4 ..........1-1/420GS-24FLH45M ......1-1/2 ..........1-1/424GSP-24FLH45M ....1-1/2 ..........1-1/224GSP-32FLH45S......2 ................1-1/232GSP-32FLH45-066 2 ................... 2


P/Number....................Flange........Hose12GS-12FLH60M ......3/4 ................3/412GS-16FLH60M ......1 ...................3/416GS-16FLH60M ......1 ...................... 120GS-20FLH60M ......1-1/4 ..........1-1/420GS-24FLH60M ......1-1/2 ..........1-1/4


P/Number................... Flange........Hose8GS-8FLH90M.......... 1/2.................1/28GS-8FLH90-080 ...... 1/2.................1/28GS-12FLH90M........ 3/4.................1/210GS-8FLH90M........ 1/2.................5/810GS-12FLH90M...... 3/4.................5/812GS-12FLH90M...... 3/4.................3/412GS-16FLH90M...... 1....................3/416GS-12FLH90M...... 3/4....................116GS-16FLH90S ....... 1.......................116GS-16FLH90M...... 1.......................116GS-16FLH90-120 .. 1.......................116GS-20FLH90S ....... 1-1/4 ................116GS-20FLH90M...... 1-1/4 ................116GS-24FLH90S ....... 1-1/2 ................120GS-16FLH90S ....... 1................ 1-1/420GS-16FLH90M...... 1................ 1-1/420GS-16FLH90-100 .. 1................ 1-1/420GS-20FLH90-076 .. 1-1/4 ......... 1-1/420GS-20FLH90M...... 1-1/4 ......... 1-1/420GS-20FLH90-120 .. 1-1/4 ......... 1-1/420GS-24FLH90S ....... 1-1/2 ......... 1-1/424GSP-24FLH90-094 1-1/2 ......... 1-1/224GSP-32FLH90S..... 2................ 1-1/232GSP-32FLH90M.... 2.......................2



Caterpillar Style O-Ring Flange

P/Number................... Flange........Hose12GS-12FLC.............. 3/4.................3/412GS-16FLC.............. 1....................3/416GS-16FLC.............. 1.......................116GS-20FLC.............. 1-1/4 ................120GS-20FLC.............. 1-1/4 ......... 1-1/420GS-24FLC.............. 1-1/2 ......... 1-1/4

Caterpillar Style O-Ring Flange - 22.5° Bent Tube

P/Number................... Flange........Hose12GS-12FLC22-016 .. 3/4.................3/416GS-16FLC22-017 .. 1.......................116GS-20FLC22-017 .. 1-1/4 ................120GS-20FLC22-017 .. 1-1/4 ......... 1-1/420GS-24FLC22-017 .. 1-1/2 ......... 1-1/4

Caterpillar Style O-Ring Flange - 30° Bent Tube

P/Number................... Flange........Hose12GS-12FLC30-022 .. 3/4.................3/412GS-16FLC30-022 .. 1....................3/416GS-16FLC30-023 .. 1.......................116GS-20FLC30-023 .. 1-1/4 ................120GS-20FLC30-024 .. 1-1/4 ......... 1-1/420GS-24FLC30-024 .. 1-1/2 ......... 1-1/4


P/Number ...................Flange ....... Hose12GS-12FLC45-035...3/4 ................ 3/412GS-16FLC45-035...1 ................... 3/416GS-16FLC45-037...1 ...................... 116GS-20FLC45-037...1-1/4................ 120GS-20FLC45-037...1-1/4.......... 1-1/420GS-24FLC45-037...1-1/2.......... 1-1/4


P/Number ...................Flange ....... Hose12GS-16FLC60-048...1 ................... 3/416GS-16FLC60-050...1 ...................... 116GS-20FLC60-050...1-1/4................ 120GS-20FLC60-052...1-1/4.......... 1-1/420GS-24FLC60-052...1-1/2.......... 1-1/4


P/Number ...................Flange ....... Hose16GS-16FLC67-057...1 ...................... 116GS-20FLC67-057...1-1/4................ 120GS-20FLC67-059...1-1/4.......... 1-1/420GS-24FLC67-059...1-1/2.......... 1-1/4


P/Number ...................Flange .......Hose12GS-12FLC90-068...3/4 ................ 3/412GS-12FLC90-128...3/4 ................ 3/412GS-16FLC90-068...1 ................... 3/416GS-16FLC90-074...1 ...................... 116GS-16FLC90-132...1 ...................... 116GS-20FLC90-074...1-1/4................ 120GS-20FLC90-077...1-1/4..........1-1/420GS-24FLC90-077...1-1/2..........1-1/4

Section 3 Global-Crimp GSM Couplings - One Piece



P/Number ...................Thread....... Hose24GSM-24MP............1-1/2..........1-1/232GSM-32MP............2 ...................... 2

Male JIC 37° Flare

P/Number ...................Thread....... Hose24GSM-24MJ.............1-7/8..........1-1/232GSM-32MJ.............2-1/2................ 2


P/Number ...................Thread....... Hose24GSM-24FJX ...........1-7/8..........1-1/232GSM-32FJX ...........2-1/2................ 2


P/Number ...................Thread....... Hose24GSM-24FJX45-034.. 1-7/8 .......1-1/2


P/Number....................Thread .......Hose24GSM-24FJX90M....1-7/8 ..........1-1/2

Female BSPP Swivel

P/Number...................... Thread ....Hose24GSM-24FBSPORX .. 1-1/2 .......1-1/232GSM-32FBSPORX .. 2.................... 2

Female Flat Face Swivel(4000 psi limited)

P/Number....................Thread .......Hose24GSM-24FFORX/4K 2 ...........1-1/2


(4000 psi limited)

P/Number....................Thread .......Hose24GSM-24FFORX45/4K 2 .......1-1/2


(4000 psi limited)

P/Number........................Thread...Hose24GSM-24FFORX90M/4K 2.... 1-1/2

Female DIN 24° Cone SwivelHeavy Series with O-Ring

P/Number................... Thread .......Hose24GSM-38FDHORX. 38mm ... 1-1/2


45°Bent Tube

P/Number................... Thread .......Hose24GSM-38FDHORX45 38mm.. 1-1/2


90°Bent Tube

P/Number................... Thread .......Hose24GSM-38FDHORX90 38mm.. 1-1/2




P/Number................... Flange........Hose24GSM-24FL............. 1-1/2 ......... 1-1/224GSM-32FL............. 2................ 1-1/232GSH-32FL ............. 2.......................2


P/Number................... Flange........Hose24GSM-24FL30M ..... 1-1/2 ......... 1-1/2


P/Number................... Flange........Hose24GSM-24FL45M ..... 1-1/2 ......... 1-1/224GSM-32FL45......... 2................ 1-1/232GSM-32FL45M ..... 2.......................2


P/Number................... Flange........Hose24GSM-24FL60M ..... 1-1/2 ......... 1-1/2


P/Number ...................Flange ....... Hose24GSM-24FL90S....... 1-1/2.......... 1-1/232GSM-32FL90-130..2 ...................... 2


P/Number ...................Flange ....... Hose24GSM-24FLH .......... 1-1/2.......... 1-1/224GSM-32FLH .......... 2 ................ 1-1/232GSM-32FLH .......... 2 ...................... 232GSM-32FLHCFM..2 ...................... 2


P/number ....................Flange ....... Hose24GSM-24FLH30 ......1-1/2.......... 1-1/232GSM-32FLH30M...2 ...................... 2


P/number ....................Flange ....... Hose24GSM-24FLH45M...... 1-1/2 ...... 1-1/224GSM-32FLH45M...... 2 ............. 1-1/232GSM-32FLH45-063.. 2 ................... 232GSM-32FLHCFM45-063 ............... 2


P/Number ...................Flange .......Hose24GSM-24FLH60M...1-1/2..........1-1/232GSM-32FLH60M...2 ...................... 2


P/Number ...................... Flange ....Hose24GSM-24FLH90-094 .. 1-1/2.......1-1/224GSM-24FLH90-150 .. 1-1/2.......1-1/224GSM-32FLH90S ....... 2 .............1-1/232GSM-32FLH90M...... 2 ................... 232GSM-32FLH90-159 .. 2 ................... 232GSM-32FLHCFM90-120................ 2




P/Number ...................Flange ....... Hose24GSM-24FLC ..........1-1/2..........1-1/232GSM-32FLC ..........2 ...................... 2


P/Number ......................Flange..... Hose24GSM-24FLC22-017 ..1-1/2 .......1-1/2


P/Number ...................... Flange.... Hose24GSM-24FLC30-023 .. 1-1/2 ......1-1/2


P/Number........................ Flange ...Hose24GSM-24FLC45-039 ... 1-1/2......1-1/232GSM-32FLC45-064 ... 2 .................. 2


P/Number.......................Flange ....Hose24GSM-24FLC60-055 ..1-1/2.......1-1/232GSM-32FLC60-083 ..2 ................... 2


P/Number....................... Flange ....Hose24GSM-24FLC90-087 .. 1-1/2 ......1-1/232GSM-32FLC90-130 .. 2................... 2

Section 3 Maxi-Crimp PCM Couplings - Two Piece


Ferrule PCM(Skiving Required)

C12, G5K, G6K

P/Number................... ...................Hose24PCM-G6K.............. .................. 1-1/224PCM-2F ................. .................. 1-1/232PCM-2F ................. .........................2


P/Number................... Thread .......Hose24PCM-24MP............ 1-1/2 ......... 1-1/232PCM-32MP............ 2.......................2

Male JIC 37° Flare

P/Number................... Thread .......Hose24PCM-24MJ ............ 1-7/8 ......... 1-1/232PCM-32MJ ............ 2-1/2 ................2


P/Number................... Thread .......Hose24PCM-24FJX........... 1-7/8 ......... 1-1/232PCM-32FJX........... 2-1/2 ................2


P/Number................... Thread .......Hose24PCM-24FJX90....... 1-7/8 ......... 1-1/2

Female Flat Face Swivel

P/Number ...................Thread....... Hose24PCM-24FFORX.........2 ............ 1-1/2


P/Number ....................... Thread .. Hose24PCM-24FFORX90M ..... 2........ 1-1/2


P/Number ...................Flange ....... Hose24PCM-24FL .............1-1/2.......... 1-1/224PCM-32FL .............2 ................ 1-1/232PCM-32FL .............2 ...................... 2


P/Number ...................Flange ....... Hose24PCM-24FL30 .........1-1/2.......... 1-1/2


P/Number ...................Flange ....... Hose24PCM-24FL45 .........1-1/2.......... 1-1/224PCM-32FL45 .........2 ................ 1-1/232PCM-32FL45 .........2 ...................... 2


P/Number ...................Flange .......Hose24PCM-24FL60 .........1-1/2..........1-1/2


P/Number ...................Flange .......Hose24PCM-24FL90 .........1-1/2..........1-1/232PCM-32FL90 .........2 ...................... 2

Section 3 Maxi-Crimp PCM Couplings - Two Piece



P/Number ...................Flange ....... Hose24PCM-24FLH ..........1-1/2..........1-1/224PCM-32FLH ..........2 ................1-1/232PCM-32FLH ..........2 ...................... 2

Code 62 O-Ring Flange Heavy22.5° Bent Tube

P/Number ...................Flange ....... Hose24PCM-24FLH22 ......1-1/2..........1-1/2


P/number ....................Flange ....... Hose24PCM-24FLH30 ......1-1/2..........1-1/232PCM-32FLH30 ......2 ...................... 2


P/number ....................Flange ....... Hose24PCM-24FLH45 ......1-1/2..........1-1/224PCM-32FLH45 ......2 ................1-1/232PCM-32FLH45 ......2 ...................... 2


P/Number ...................Flange ....... Hose24PCM-24FLH60 ......1-1/2..........1-1/232PCM-32FLH60 ......2 ...................... 2


P/Number....................Flange........Hose24PCM-24FLH90M ...1-1/2 ..........1-1/224PCM-32FLH90M ...2 ................1-1/232PCM-32FLH90M ...2 ...................... 232PCM-32FLH90L ....2 ...................... 2


P/Number....................Flange........Hose24PCM-24FLC...........1-1/2 ..........1-1/232PCM-32FLC...........2 ...................... 2


P/Number....................Flange........Hose24PCM-24FLC22.......1-1/2 ..........1-1/2


P/Number....................Flange........Hose24PCM-24FLC30.......1-1/2 ..........1-1/2


P/Number................... Flange........Hose24PCM-24FLC45 ...... 1-1/2 ......... 1-1/232PCM-32FLC45 ...... 2.......................2





Section 3 Vacu-Crimp GL Couplings - One Piece



P/Number................... Flange........Hose40GL-40FL................ 2-1/2 ......... 2-1/240GL-48FL................ 3................ 2-1/240GL-56FL................ 3-1/2 ......... 2-1/248GL-48FL................ 3.......................356GL-56FL................ 3-1/2 ......... 3-1/264GL-64FL................ 4.......................4


P/Number................... Flange........Hose40GL-40FL22 ............ 2-1/2 ......... 2-1/240GL-48FL22 ............ 3................ 2-1/248GL-48FL22 ............ 3.......................3


P/Number................... Flange........Hose40GL-40FL30 ............ 2-1/2 ......... 2-1/240GL-48FL30 ............ 3................ 2-1/248GL-48FL30 ............ 3.......................3


P/Number ...................Flange ....... Hose40GL-40FL45 ............ 2-1/2.......... 2-1/240GL-48FL45 ............ 3 ................ 2-1/248GL-48FL45 ............ 3 ...................... 348GL-56FL45 ............ 3-1/2................ 356GL-56FL45 ............ 3-1/2.......... 3-1/256GL-64FL45 ............ 4 ................ 3-1/2


P/Number ...................Flange ....... Hose40GL-40FL60 ............ 2-/2............ 2-1/248GL-48FL60 ............ 3 ...................... 3


P/Number ...................Flange ....... Hose40GL-40FL67 ............ 2-/2............ 2-1/248GL-48FL67 ............ 3 ...................... 364GL-64FL67 ............ 4 ...................... 4


P/Number ...................Flange .......Hose40GL-40FL90.............2-1/2..........2-1/240GL-48FL90.............3 ................2-1/248GL-48FL90.............3 ...................... 356GL-56FL90.............3-1/2..........3-1/264GL-64FL90.............4 ...................... 4


Contents


Section 4Adaptors

NIPPLESC1 ..........................JIC x JIC .............................................................................................................................. 4.9F1...........................ORFS x ORFS ..................................................................................................................... 4.9CB1........................BSPT x BSPT ...................................................................................................................... 4.9CR1........................BSPP x BSPP Encapsulated Seal ........................................................................................ 4.9CP1 ........................BSPP x BSPP ...................................................................................................................... 4.9ZCR1 .....................BSPP x BSPP Adjustable .................................................................................................... 4.9CPJ1.......................JIS x JIS (BSPP x BSPP)..................................................................................................... 4.9CPB1 .....................BSPP x BSPT ...................................................................................................................... 4.10CN1 .......................NPTF x NPTF...................................................................................................................... 4.10CRB1 .....................BSPP x BSPT Encapsulated Seal ........................................................................................ 4.10CPN1 .....................BSPP x NPTF ...................................................................................................................... 4.10CU1 .......................UNO x UNO Adjustable ..................................................................................................... 4.10C2 ..........................JIC x JIC BULKHEAD ....................................................................................................... 4.10ZC2........................UNO x JIC BULKHEAD Extended.................................................................................... 4.10F2...........................ORFS x ORFS BULKHEAD .............................................................................................. 4.10CA2 .......................SAE x SAE BULKHEAD ................................................................................................... 4.11ZCR2 .....................BSPP x JIC BULKHEAD ................................................................................................... 4.11CB2........................BSPT x JIC .......................................................................................................................... 4.11CBA2.....................BSPT x SAE ........................................................................................................................ 4.11CBJ2 ......................BSPT x JAP......................................................................................................................... 4.11CR2........................BSPP x JIC Encapsulated Seal ............................................................................................ 4.11CP2 ........................BSPP x JIC .......................................................................................................................... 4.12ZCP2......................BSPP x JIC 1.5mm Orifice.................................................................................................. 4.12CP2-E ....................BSPP x JIC Extended .......................................................................................................... 4.12CM2.......................DIN x JIC ............................................................................................................................ 4.12CM2L ....................DKL x JIC ........................................................................................................................... 4.12CM2S.....................DKS x JIC............................................................................................................................ 4.12CMP2L ..................DKL x BSPP........................................................................................................................ 4.12CMP2S ..................DKS x BSPP........................................................................................................................ 4.13CN2 .......................NPTF x JIC.......................................................................................................................... 4.13FP2.........................BSPP x ORFS...................................................................................................................... 4.13C3 ..........................SAE ‘O’ Ring Boss x JIC ................................................................................................... 4.13F3...........................SAE ‘O’ Ring Boss x ORFS M/M ...................................................................................... 4.14CB3........................SAE ‘O’ Ring Boss x BSPT................................................................................................ 4.14CN3 .......................SAE ‘O’ Ring Boss x NPTF................................................................................................ 4.14C4 ..........................SAE ‘O’ Ring Boss x JIC EXTENDED.............................................................................. 4.14CB4........................BSPT x LP Straight Hose Tail............................................................................................. 4.14CM4.......................DIN x LP Straight Hose Tail ............................................................................................... 4.14CN4 .......................NPTF x LP Straight Hose Tail ............................................................................................ 4.15CP4 ........................BSPP x LP Straight Hose Tail............................................................................................. 4.15C5 ..........................SAE ‘O’ Ring Boss x LP Straight Hose Tail ...................................................................... 4.15CB5........................BSPT x LP Straight Hose Tail............................................................................................. 4.15CP6 ........................BSPP Bulkhead ................................................................................................................... 4.15CR6........................BSPP x BSPP Bulkhead Encapsulated Seal ........................................................................ 4.15F7...........................ORFS x JIC M/M ................................................................................................................ 4.15

SOCKETSC9 ..........................SAE ‘O’ Ring Boss ............................................................................................................. 4.16CB9........................BSPT.................................................................................................................................... 4.16CN9 .......................NPTF ................................................................................................................................... 4.16CP9 ........................BSPP.................................................................................................................................... 4.16

HALF SOCKETSC14 ........................SAE ‘O’ Ring Boss ............................................................................................................. 4.16CB14......................BSPT.................................................................................................................................... 4.16CP14 ......................BSPP.................................................................................................................................... 4.16CN14 .....................NPTF ................................................................................................................................... 4.16


Section 4Adaptors

Contents


FIXED ADAPTORSCB18 ......................BSPT x BSPT M/F ..............................................................................................................4.16CPN18....................BSPP x NPTF ......................................................................................................................4.16CN18......................NPTF x NPTF M/F ..............................................................................................................4.17CB20 ......................BSPT x JIC F/M ..................................................................................................................4.17CP20 ......................BSPP X JIC F/M..................................................................................................................4.17CN20......................NPTF x JIC F/M ..................................................................................................................4.17CB21 ......................SAE ‘O’ Ring Boss x BSPT M/F ........................................................................................4.17CN21......................SAE ‘O’ Ring Boss x NPTF M/F ........................................................................................4.17C22.........................JIC x JIC F/M ......................................................................................................................4.17CB22 ......................SAE ‘O’ Ring Boss x BSPT F/M ........................................................................................4.17CN22......................SAE ‘O’ Ring Boss x NPTF F/M ........................................................................................4.18

STRAIGHT UNIONSCB24 ......................BSPT x BSPP M/F...............................................................................................................4.18CR24 ......................BSPP x BSPP M/F...............................................................................................................4.18CP24 ......................BSPP x BSPP M/F...............................................................................................................4.18CP24G....................BSPP x BSPP M/F with 7/16" UNO Gauge Point ..............................................................4.18CN24......................NPTF x NPSM M/F.............................................................................................................4.18CB25 ......................BSPT x BSPP F/F ................................................................................................................4.18CN25......................NPTF x NPSM F/F ..............................................................................................................4.18CS25 ......................JIC x JIC F/F........................................................................................................................4.18C26.........................SAE ‘O’ Ring Boss x JIC M/F ............................................................................................4.18CB26 ......................SAE ‘O’ Ring Boss x BSPP M/F.........................................................................................4.18CN26......................SAE ‘O’ Ring Boss x NPSM M/F .......................................................................................4.19C27G......................JIC x JIC M/F with 7/16" UNO Gauge Point ......................................................................4.19CB27 ......................BSPT x JIC M/F ..................................................................................................................4.19CP27 ......................BSPP x JIC M/F...................................................................................................................4.19CN27......................NPTF x JIC M/F ..................................................................................................................4.19CR27 ......................BSPP x JIC Encapsulated Seal ............................................................................................4.19F27G ......................ORFS x ORFS M/F with 7/16" UNO Gauge Point .............................................................4.19CP28 ......................BSPP x JIC F/F Gauge.........................................................................................................4.19F28 .........................ORFS x JIC M/F ..................................................................................................................4.19F29 .........................ORFS x JIC F/M ..................................................................................................................4.19

45° UNIONSC30.........................JIC x JIC M/F ......................................................................................................................4.20CB30 ......................BSPT x BSPP M/F...............................................................................................................4.20CN30......................NPTF x NPSM M/F.............................................................................................................4.20C31.........................SAE ‘O’ Ring Boss x JIC M/F ............................................................................................4.20CN31......................SAE ‘O’ Ring Boss x NPSM M/F .......................................................................................4.20

45° ELBOWSCB36 ......................BSPT x BSPT M/M .............................................................................................................4.20CN36......................NPTF x NPTF M/M.............................................................................................................4.20CB37 ......................BSPT x BSPT M/F ..............................................................................................................4.20CN37......................NPTF x NPTF M/F ..............................................................................................................4.20CB38 ......................BSPT x JIC M/M .................................................................................................................4.20CBJ38 ....................BSPT x JIS M/M..................................................................................................................4.21CP38 ......................BSPP x JIC M/M .................................................................................................................4.21CN38......................NPTF x JIC M/M.................................................................................................................4.21CB39 ......................BSPT x BSPT F/F................................................................................................................4.21C40.........................SAE ‘O’ Ring Boss x JIC M/M ...........................................................................................4.21C41.........................SAE ‘O’ Ring Boss x LP Hose Tail ....................................................................................4.21CB41 ......................BSPT x LP Hose Tail...........................................................................................................4.22CN41......................NPTF x LP Hose Tail ..........................................................................................................4.22C42.........................JIC x JIC Bulkhead M/M.....................................................................................................4.22


Contents


Section 4Adaptors

90° UNIONSC46 ........................JIC x JIC M/F ...................................................................................................................... 4.22CB46......................BSPT x BSPP M/F .............................................................................................................. 4.22CP46 ......................BSPP x BSPP M/F............................................................................................................... 4.22CN46 .....................NPTF x NPSM M/F............................................................................................................. 4.22F46.........................ORFS x ORFS M/F ............................................................................................................. 4.22C47 ........................SAE ‘O’ Ring Boss x JIC M/F ............................................................................................ 4.22CB47......................SAE ‘O’ Ring Boss x BSPP M/F ........................................................................................ 4.23CN47 .....................SAE ‘O’ Ring Boss x NPTF M/F........................................................................................ 4.23CB48......................BSPT x JIC .......................................................................................................................... 4.23ZC52......................SAE ’O’ Ring Boss x SAE ’O’ Ring Boss.......................................................................... 4.23

90° ELBOWSCB53......................BSPT x BSPT M/M............................................................................................................. 4.23CBS53 ...................BSPT x BSPT M/M............................................................................................................. 4.23CPB53 ...................BSPP x BSPT M/M ............................................................................................................. 4.23CPBS53 .................BSPP Swivel x BSPT M/M................................................................................................. 4.23F53.........................ORFS x ORFS M/M............................................................................................................ 4.23CN53 .....................NPTF x NPTF M/M ............................................................................................................ 4.24CP53 ......................BSPP x BSPT M/M ............................................................................................................. 4.24CB54......................BSPT x BSPT M/F .............................................................................................................. 4.24CN54 .....................NPTF x NPTF M/F.............................................................................................................. 4.24CPB54 ...................BSPP x BSPT ...................................................................................................................... 4.24CB55......................BSPT x BSPT F/F ............................................................................................................... 4.24CN55 .....................NPTF x NPTF F/F ............................................................................................................... 4.24CB56......................BSPT x JIC M/M................................................................................................................. 4.24CBJ56 ....................BSPT x JIS .......................................................................................................................... 4.25CP56 ......................BSPP x JIC M/M ................................................................................................................. 4.25CM56.....................DIN x JIC ............................................................................................................................ 4.25CN56 .....................NPTF x JIC M/M................................................................................................................. 4.25FP56.......................BSPP x ORFS M/M............................................................................................................. 4.25CB57......................BSPT x JIC Extended M/M................................................................................................. 4.25CBS57 ...................BSPT Swivel x JIC M/M..................................................................................................... 4.25CP57 ......................BSPP Extended x JIC M/M................................................................................................. 4.26CN57 .....................NPTF x JIC Extended M/M ................................................................................................ 4.26C58 ........................JIC x JIC M/M..................................................................................................................... 4.26CB58......................BSPT x JIC F/M .................................................................................................................. 4.26CN58 .....................NPTF x JIC F/M.................................................................................................................. 4.26C59 ........................SAE ‘O’ Ring Boss x JIC M/M........................................................................................... 4.26F59.........................SAE ‘O’ Ring Boss x ORFS M/M ...................................................................................... 4.27CS59 ......................SAE ‘O’ Ring Boss Swivel x JIC M/M............................................................................... 4.27CE59......................SAE ‘O’ Ring Boss x JIC Extended M/M........................................................................... 4.27CES59....................SAE ‘O’ Ring Boss Swivel x JIC Extended M/M .............................................................. 4.27ZC59......................SAE ’O’ Ring Boss x JIC Orifice Elbow 0.9mm................................................................ 4.27CB59......................SAE ‘O’ Ring Boss x BSPT M/M....................................................................................... 4.27CN59 .....................SAE ‘O’ Ring Boss x NPTF M/M ...................................................................................... 4.27C60 ........................SAE ‘O’ Ring Boss x LP Hose Tail M/M........................................................................... 4.27CB60......................BSPT x LP Hose Tail M/M ................................................................................................. 4.28CP60 ......................BSPP x LP Hose Tail M/M ................................................................................................. 4.28CN60 .....................NPTF x LP Hose Tail M/M................................................................................................. 4.28C61 ........................JIC x JIC BULKHEAD M/M.............................................................................................. 4.28CA61 .....................SAE x SAE BULKHEAD M/M.......................................................................................... 4.28

TEESCB61......................BSPT x BSPT x BSPP M/M/F ............................................................................................ 4.28F61.........................ORFS x ORFS x ORFS M/M/F........................................................................................... 4.28CB62......................BSPT x BSPT x BSPT M/M/M........................................................................................... 4.28CN62 .....................NPTF x NPTF x NPTF M/M/M.......................................................................................... 4.29


Section 4Adaptors

Contents


TEES Cont’dZCP62 ....................BSPP x BSPP x JIC M/M/M ...............................................................................................4.29C63.........................JIC x JIC x JIC M/M/M.......................................................................................................4.29F63 .........................ORFS x ORFS x ORFS M/M/M..........................................................................................4.29CB63 ......................BSPT x BSPT x BSPT F/F/F...............................................................................................4.29CN63......................NPTF x NPTF x NPTF F/F/F ..............................................................................................4.29C64.........................JIC x JIC x JIC F Swivel/M/M ............................................................................................4.29F64 .........................ORFS x ORFS x ORFS F/M/M...........................................................................................4.29CB64 ......................BSPT x BSPT x BSPT M/F/F..............................................................................................4.29CN64......................NPTF x NPTF x NPTF M/F/F.............................................................................................4.30C65.........................JIC x JIC x JIC M/M/F Swivel ............................................................................................4.30CB65 ......................JIC x JIC x BSPT M/M/M...................................................................................................4.30CP65 ......................JIC x JIC x BSPP M/M/M ...................................................................................................4.30CBP65....................BSPP x BSPP x BSPT M/M/M ...........................................................................................4.30CN65......................JIC x JIC x NPTF M/M/M...................................................................................................4.30CBS66....................BSPP x BSPP x BSPT F Swivel/F Swivel/M......................................................................4.30CN66......................NPTF x NPTF x NPTF F/F/M.............................................................................................4.30CB67 ......................JIC x BSPT x JIC M/M/M...................................................................................................4.30CP67 ......................JIC x BSPP x JIC M/M/M ...................................................................................................4.31CN67......................JIC x NPTF x JIC M/M/M...................................................................................................4.31C68.........................JIC x JIC x SAE ‘O’ Ring Boss M/M/M.............................................................................4.31C69.........................SAE ‘O’ Ring Boss x JIC x JIC M/M/M.............................................................................4.31CB69 ......................BSPP x BSPT x BSPT F Swivel/M/M ................................................................................4.31C70.........................JIC x JIC x JIC BULKHEAD M/M/M................................................................................4.31C71.........................JIC x JIC BULKHEAD x JIC M/M/M................................................................................4.31ZCP71 ....................JIC x JIC BULKHEAD x BSPP M/M/M ............................................................................4.31

CROSSC72.........................JIC x JIC x JIC x JIX M/M/M/M ........................................................................................4.32F72 .........................ORFS x ORFS x ORFS x ORFS M/M/M/M.......................................................................4.32CB72 ......................BSPT x BSPT x BSPT x BSPT F/F/F/F ..............................................................................4.32CN72......................NPTF x NPTF x NPTF x NPTF F/F/F/F .............................................................................4.32

REDUCING BUSHESCB73 ......................BSPT x BSPT ......................................................................................................................4.32CR73 ......................BSPP x BSPP Encapsulated Seal.........................................................................................4.32CP73 ......................BSPP x BSPP Style A..........................................................................................................4.32CP73 ......................BSPP x BSPP Style B..........................................................................................................4.32CPB73....................BSPP x BSPT Style A .........................................................................................................4.32CPB73....................BSPP x BSPT Style B..........................................................................................................4.33CN73......................NPTF x NPTF......................................................................................................................4.33C74.........................SAE ‘O’ Ring Boss x SAE ‘O’ Ring Boss ..........................................................................4.33CB74 ......................SAE ‘O’ Ring Boss x BSPT ................................................................................................4.33CN74......................SAE ‘O’ Ring Boss x NPTF Style A...................................................................................4.33CN74......................SAE ‘O’ Ring Boss x NPTF Style B ...................................................................................4.33

PLUGS AND CAP NUTSC77.........................SAE ‘O’ Ring Boss Plug .....................................................................................................4.33C77S ......................SAE ‘O’ Ring Boss Socket Plug .........................................................................................4.34CB77 ......................BSPT Plug............................................................................................................................4.34CR77 ......................BSPP Plug Encapsulated Seal..............................................................................................4.34CP77 ......................BSPP Plug............................................................................................................................4.34CR77S....................BSPP Socket Plug................................................................................................................4.34CN77......................NPTF Plug ...........................................................................................................................4.34CM77 .....................Metric Plug ..........................................................................................................................4.34C78.........................JIC Plug................................................................................................................................4.34F78 .........................ORFS Plug ...........................................................................................................................4.34


Contents


Section 4Adaptors

PLUGS AND CAP NUTS Cont’dCK78 .....................Metric Komatsu Plug........................................................................................................... 4.34C79 ........................JIC Cap Nut ......................................................................................................................... 4.34CBS79 ...................BSPP Cap Nut ..................................................................................................................... 4.35F79.........................ORFS Cap Nut..................................................................................................................... 4.35CK79 .....................Metric Komatsu Cap Nut..................................................................................................... 4.35

BULKHEAD NUTC80 ........................JIC........................................................................................................................................ 4.35CP80 ......................BSPP.................................................................................................................................... 4.35F80.........................ORFS ................................................................................................................................... 4.35

TUBE NUTS AND SLEEVESC83 ........................JIC........................................................................................................................................ 4.35C83-**N ................JIC Nut................................................................................................................................. 4.35C83-**S.................JIC Sleeve ............................................................................................................................ 4.35F83.........................ORFS ................................................................................................................................... 4.36F83-**N.................ORFS Nut ............................................................................................................................ 4.36F83-**S .................ORFS Sleeve ....................................................................................................................... 4.36

TUBE REDUCERSC84 ........................JIC x JIC F/M Style A ......................................................................................................... 4.36C84-****R ............JIC x JIC F/M Style A Reducer........................................................................................... 4.36C84-****B ............JIC x JIC F/M Style B ......................................................................................................... 4.36F84.........................ORFS x ORFS F/M Style A ................................................................................................ 4.36F84-****R.............ORFS x ORFS F/M Style A Reducer.................................................................................. 4.36

TUBEWELD FITTINGSC86 ........................JIC Male Nipple .................................................................................................................. 4.37F86.........................ORFS Male Nipple .............................................................................................................. 4.37CB86......................BSPT Male Nipple .............................................................................................................. 4.37CN86 .....................NPTF Male Nipple .............................................................................................................. 4.37CP86 ......................BSPP Male........................................................................................................................... 4.37C87 ........................JIC Female Union................................................................................................................ 4.37CB87......................BSPP Female Union ............................................................................................................ 4.38C88 ........................JIC Male 90° Elbow ............................................................................................................ 4.38

S.A.E. FLANGES-TUBEWELDC92 ........................Flange SAE O-Ring Code 61 .............................................................................................. 4.38C92H .....................Flange SAE O-Ring Code 62 .............................................................................................. 4.38

J.I.C. TUBE ASSEMBLIESC93 ........................JIC x JIC Short 90° M/F...................................................................................................... 4.38C93H .....................JIC x JIC Short 90° M/F...................................................................................................... 4.38C94 ........................JIC x JIC Long 90° M/F ...................................................................................................... 4.38C94H .....................JIC x JIC Long 90° M/F ...................................................................................................... 4.39C95 ........................JIC x JIC Tube 45° M/F ...................................................................................................... 4.39

J.I.C. TO S.A.E. FLANGED TUBEWELD ASSEMBLIESC96 ........................JIC Male Flange Head Straight Code 61 ............................................................................. 4.39C96H .....................JIC Male Flange Head Straight Code 62 ............................................................................. 4.39C97 ........................JIC Male Flange Head 90° Code 61 .................................................................................... 4.39C97H .....................JIC Male Flange Head 90° Code 62 .................................................................................... 4.39C98 ........................JIC Male Flange Head 45° Code 61 .................................................................................... 4.40C98H .....................JIC Male Flange Head 45° Code 62 .................................................................................... 4.40FLH6K...................JIC Male Flange Head 6000psi............................................................................................ 4.40FLH6K45...............JIC Male Flange Head 45° 6000 psi .................................................................................... 4.40FLH6K90...............JIC Male Flange Head 90° 6000 psi .................................................................................... 4.40


Section 4Adaptors

Contents


SPLIT CLAMPSFSC ........................Flange Code 61 ....................................................................................................................4.41FSCH .....................Flange Code 62 ....................................................................................................................4.41CATFHS ................Flange CAT-Style ................................................................................................................4.41

SAE FLANGESFL...........................Blank Code 61 .....................................................................................................................4.41FLH........................Blank Code 62 .....................................................................................................................4.41FP...........................Blank Code 61 .....................................................................................................................4.41FPH ........................Blank Code 62 .....................................................................................................................4.41FB ..........................BSPP Code 61......................................................................................................................4.41FN ..........................NPTF Code 61 .....................................................................................................................4.41FBH........................BSPP Code 62......................................................................................................................4.41

O-RINGSR01.........................to suit UN Threads...............................................................................................................4.42R02.........................to suit SAE Flanges..............................................................................................................4.42R03.........................to suit BSPP Threads ...........................................................................................................4.42R05.........................to suit Male Swivel ..............................................................................................................4.42R06.........................to suit ORFS Fittings ...........................................................................................................4.42R19.........................Encapsulated to suit BSPP Threads .....................................................................................4.43

SEALSR04.........................to suit BSPP Threads DIN Std.............................................................................................4.42R04B ......................to suit BSP.P Threads B.S Std .............................................................................................4.42R04M .....................to suit Metric Threads ..........................................................................................................4.42DKR.......................Metal Sealing Rings to DIN Std ..........................................................................................4.43

RETAINING RINGSR13.........................to suit BSPP O-Rings...........................................................................................................4.43

SEAL KITSSORKIT.................O-Ring Assortment (UNO, ORFS, Code61 & Code62)......................................................4.43SORKIT-P .............BSPP O-Ring & Retainer Kit .............................................................................................4.43SORKIT-DM .........Bonded Seal Kit (Metric Seal).............................................................................................4.43SORKIT-DP ..........Bonded Seal Kit (BSPP Seal) ..............................................................................................4.43

SAE FLANGE BOLT KITSBKU-CAP..............UNC Cap Head Bolt Kit ......................................................................................................4.44BKUH-CAP...........UNC Cap Head Bolt Kit Heavy Duty..................................................................................4.44BKU-HEX .............UNC Hex Head Bolt Kit ......................................................................................................4.44BKUH-HEX ..........UNC Hex Head Bolt Kit Heavy Duty .................................................................................4.44BKM-CAP .............Metric Cap Head Bolt Kit ....................................................................................................4.44BKMH-CAP ..........Metric Cap Head Bolt Kit Heavy Duty ...............................................................................4.44BKM-HEX.............Metric Hex Head Bolt Kit....................................................................................................4.44BKMH-HEX..........Metric Hex Head Bolt Kit Heavy Duty ...............................................................................4.44

PLUG PLASTICPPJ .........................JIC/SAE ...............................................................................................................................4.45PPB ........................BSP/NPT..............................................................................................................................4.45PPM .......................Metric...................................................................................................................................4.45

CAPS PLASTICCPJ.........................JIC/SAE ...............................................................................................................................4.45CPB........................BSP/NPT..............................................................................................................................4.45CPM.......................Metric...................................................................................................................................4.45CPF61 ....................Flange Code 61 ....................................................................................................................4.45CPF62 ....................Flange Code 62 ....................................................................................................................4.45


Contents


Section 4Adaptors

FLARETITE SEALSIP ........................... Individual Seals ................................................................................................................... 4.47BP ..........................Standard Packs..................................................................................................................... 4.47QT..........................Bulk Packs ........................................................................................................................... 4.47

BANJOSBJ1.........................Banjo Metric c/w Back Bore ............................................................................................... 4.48BJ2.........................Banjo BSPP c/w Back Bore ................................................................................................ 4.48BJ3.........................Banjo Metric to JIC-M ........................................................................................................ 4.48BJB ........................Banjo Bolt Metric ................................................................................................................ 4.48BJB ........................Banjo Bolt BSPP ................................................................................................................. 4.48BJW .......................Banjo Washer ...................................................................................................................... 4.48


Section 4Adaptors

Contents


THIS PAGE INTENTIONALLY LEFT (MOSTLY) BLANK

Section 4Adaptors


*Manufactured To Order (minimum qtys may apply)

Nipple M/MJIC x JIC

P/Number ................................... ThreadC1-0707............................... 7/16 x 7/16C1-0808................................... 1/2 x 1/2C1-0907............................... 9/16 x 7/16C1-0909............................... 9/16 x 9/16C1-1207................................. 3/4 x 7/16C1-1209................................. 3/4 x 9/16C1-1212................................... 3/4 x 3/4C1-1412................................... 7/8 x 3/4C1-1414................................... 7/8 x 7/8C1-1709............................1-1/16 x 9/16C1-1712..............................1-1/16 x 3/4C1-1714..............................1-1/16 x 7/8C1-1717........................ 1-1/16 x 1-1/16C1-1917........................ 1-3/16 x 1-1/16C1-2114..............................1-5/16 x 7/8C1-2117........................ 1-5/16 x 1-1/16C1-2119........................ 1-5/16 x 1-3/16C1-2121........................ 1-5/16 x 1-5/16C1-2621.......................... 1-5/8 x 1-5/16C1-2626............................ 1-5/8 x 1-5/8C1-3026............................ 1-7/8 x 1-5/8C1-3030............................ 1-7/8 x 1-7/8C1-4040............................ 2-1/2 x 2-1/2

Nipple M/MORFS x ORFS

P/Number ................................... ThreadF1-0909 ............................... 9/16 x 9/16F1-1111 ........................... 11/16 x 11/16F1-1313 ........................... 13/16 x 13/16F1-1616 ......................................... 1 x 1F1-1916 .................................1-3/16 x 1F1-1919 ........................ 1-3/16 x 1-3/16F1-2323 ........................ 1-7/16 x 1-7/16

Nipple M/MBSPT x BSPT

P/Number....................................ThreadCB1-0202 ................................1/8 x 1/8CB1-0402 ................................1/4 x 1/8CB1-0402Z (1.6mm orifice) ...1/4 x 1/8CB1-0404 ................................1/4 x 1/4CB1-0604 ................................3/8 x 1/4CB1-0606 ................................3/8 x 3/8CB1-0804 ................................1/2 x 1/4CB1-0806 ................................1/2 x 3/8CB1-0808 ................................1/2 x 1/2CB1-1008 ................................5/8 x 1/2CB1-1010 ................................5/8 x 5/8CB1-1204 ................................3/4 x 1/4CB1-1206 ................................3/4 x 3/8CB1-1208 ................................3/4 x 1/2CB1-1212 ................................3/4 x 3/4CB1-1606 ...................................1 x 3/8CB1-1608 ...................................1 x 1/2CB1-1612 ...................................1 x 3/4CB1-1616 ...................................... 1 x 1CB1-2012 ............................ 1-1/4 x 3/4CB1-2016 ................................1-1/4 x 1CB1-2020 ......................... 1-1/4 x 1-1/4

* CB1-2412 ............................ 1-1/2 x 3/4CB1-2416 ................................1-1/2 x 1CB1-2420 ......................... 1-1/2 x 1-1/4CB1-2424 ......................... 1-1/2 x 1-1/2

* CB1-3220 ................................2 x 1-1/4CB1-3224 ................................2 x 1-1/2CB1-3232 ...................................... 2 x 2CB1-4040 ......................... 2-1/2 x 2-1/2

Nipple M/MBSPP x BSPP

Encapsulated SealIncluded in the supply.

P/Number....................................ThreadCR1-0202 ................................1/8 x 1/8CR1-0404 ................................1/4 x 1/4CR1-0604 ................................3/8 x 1/4CR1-0606 ................................3/8 x 3/8CR1-0806 ................................1/2 x 3/8CR1-0808 ................................1/2 x 1/2CR1-1208 ................................3/4 x 1/2CR1-1212 ................................3/4 x 3/4CR1-1612 ...................................1 x 3/4CR1-1616 ...................................... 1 x 1CR1-2016 ................................1-1/4 x 1CR1-2020 ......................... 1-1/4 x 1-1/4CR1-2424 ......................... 1-1/2 x 1-1/2


Included in the supply is one‘O’ Ring and Retainer Washer.Jump Threads are supplied with

‘O’ Ring & Retainer on largeThread only.

P/Number................................... ThreadCP1-0202 .................................1/8 x 1/8CP1-0404 .................................1/4 x 1/4CP1-0604 .................................3/8 x 1/4CP1-0606 .................................3/8 x 3/8CP1-0806 .................................1/2 x 3/8CP1-0808 .................................1/2 x 1/2CP1-1208 .................................3/4 x 1/2CP1-1212 .................................3/4 x 3/4CP1-1608 ....................................1 x 1/2CP1-1612 ....................................1 x 3/4CP1-1616 .......................................1 x 1CP1-2016 ................................ 1-1/4 x 1CP1-2020 ..........................1-1/4 x 1-1/4CP1-2420 ..........................1-1/2 x 1-1/4CP1-2424 ..........................1-1/2 x 1-1/2CP1-3232 .......................................2 x 2


Adjustable

P/Number................................... ThreadCR1-0606Z ..............................3/8 x 3/8CR1-0808Z ..............................1/2 x 1/2

Nipple M/MJIS x JIS

(BSPP x BSPP)

P/Number................................... ThreadCPJ1-0404................................1/4 x 1/4CPJ1-0606................................3/8 x 3/8CPJ1-0808................................1/2 x 1/2CPJ1-1212................................3/4 x 3/4CPJ1-1616......................................1 x 1


Section 4Adaptors


Nipple M/MBSPP x BSPT

P/Number................................... ThreadCPB1-0204 ..............................1/8 x 1/4CPB1-0404 ..............................1/4 x 1/4CPB1-0406 ..............................1/4 x 3/8CPB1-0604 ..............................3/8 x 1/4CPB1-0606 ..............................3/8 x 3/8CPB1-0608 ..............................3/8 x 1/2CPB1-0804 ..............................1/2 x 1/4CPB1-0806 ..............................1/2 x 3/8CPB1-0808 ..............................1/2 x 1/2CPB1-0812 ..............................1/2 x 3/4CPB1-1208 ..............................3/4 x 1/2CPB1-1212 ..............................3/4 x 3/4CPB1-1216 .................................3/4 x 1CPB1-1608 .................................1 x 1/2CPB1-1612 .................................1 x 3/4CPB1-1616 ....................................1 x 1CPB1-2016 ............................. 1-1/4 x 1CPB1-2020 .......................1-1/4 x 1-1/4CPB1-2420 .......................1-1/2 x 1-1/4CPB1-2424 .......................1-1/2 x 1-1/2CPB1-3220 ............................. 2 x 1-1/4

* CPB1-3224 ............................. 2 x 1-1/2CPB1-3232 ....................................2 x 2

Nipple M/MNPTF x NPTF

P/Number................................... ThreadCN1-0202 ................................1/8 x 1/8CN1-0402 ................................1/4 x 1/8CN1-0404 ................................1/4 x 1/4CN1-0604 ................................3/8 x 1/4CN1-0606 ................................3/8 x 3/8CN1-0806 ................................1/2 x 3/8CN1-0808 ................................1/2 x 1/2CN1-1204 ................................3/4 x 1/4

* CN1-1206 ................................3/4 x 3/8CN1-1208 ................................3/4 x 1/2CN1-1212 ................................3/4 x 3/4CN1-1608 ...................................1 x 1/2CN1-1612 ...................................1 x 3/4CN1-1616 ......................................1 x 1

* CN1-2016 ............................... 1-1/4 x 1CN1-2020 .........................1-1/4 x 1-1/4CN1-2420 .........................1-1/2 x 1-1/4CN1-2424 .........................1-1/2 x 1-1/2CN1-3224 ............................... 2 x 1-1/2CN1-3232 ......................................2 x 2

* CN1-4040 .........................2-1/2 x 2-1/2

Nipple M/MBSPP x BSPT

Encapsulated Seal

P/Number ................................... ThreadCRB1-0604 ............................. 3/8 x 1/4CRB1-0606 ............................. 3/8 x 3/8

* CRB1-0608 ............................. 3/8 x 1/2* CRB1-0806 ............................. 1/2 x 3/8

CRB1-0808 ............................. 1/2 x 1/2CRB1-1212 ............................. 3/4 x 3/4CRB1-1616 ................................... 1 x 1

* CRB1-2016 ............................. 1-1/4 x 1CRB1-2020 .......................1-1/4 x 1-1/4

Nipple M/MBSPP x NPTF

P/Number ................................... ThreadCPN1-0404.............................. 1/4 x 1/4

* CPN1-0604.............................. 3/8 x 1/4CPN1-0606.............................. 3/8 x 3/8CPN1-0608.............................. 3/8 x 1/2

* CPN1-0806.............................. 1/2 x 3/8CPN1-0808.............................. 1/2 x 1/2

* CPN1-0812.............................. 1/2 x 3/4CPN1-1212.............................. 3/4 x 3/4CPN1-1616.................................... 1 x 1

* CPN1-1620.............................. 1 x 1-1/4* CPN1-2020........................1-1/4 x 1-1/4* CPN1-2024........................1-1/4 x 1-1/2

Nipple M/MUNO x UNOAdjustable

P/Number ................................... ThreadCU1-0909............................ 9/16 x 9/16CU1-1212................................ 3/4 x 3/4CU1-1412................................ 7/8 x 3/4CU1-2121......................1-5/16 x 1-5/16

Bulkhead Nipple M/MJIC x JIC

P/Number ...................................ThreadC2-0707 ...............................7/16 x 7/16C2-0707-E56 .......................7/16 x 7/16C2-0808 ...................................1/2 x 1/2C2-0909 ...............................9/16 x 9/16C2-0909-E59 .......................9/16 x 9/16C2-1212 ...................................3/4 x 3/4C2-1212-E66 ...........................3/4 x 3/4C2-1414 ...................................7/8 x 7/8C2-1714 ..............................1-1/16 x 7/8C2-1717 ........................ 1-1/16 x 1-1/16C2-1919 ........................ 1-3/16 x 1-3/16C2-2121 ........................ 1-5/16 x 1-5/16C2-2626 ............................ 1-5/8 x 1-5/8C2-3030 ............................ 1-7/8 x 1-7/8C2-4040 ............................ 2-1/2 x 2-1/2

Bulkhead Nipple M/MUNO x JICExtended

P/Number ...................................Thread* ZC2-1212 ................................3/4 x 3/4

ZC2-1414 ................................7/8 x 7/8* ZC2-1717 ..................... 1-1/16 x 1-1/16* ZC2-2121 ..................... 1-5/16 x 1-5/16

Bulkhead Nipple M/MORFS x ORFS

P/Number ...................................ThreadF2-0909 ...............................9/16 x 9/16F2-1111 ...........................11/16 x 11/16F2-1313 ...........................13/16 x 13/16F2-1616 ......................................... 1 x 1F2-1919 ...................... 1-3/16 x 1-1/316F2-2323 ........................ 1-7/16 x 1-7/16F2-2727 ................... 1-11/16 x 1-11/16

Section 4Adaptors



Bulkhead Nipple M/MSAE x SAE

P/Number ................................... ThreadCA2-1010................................ 5/8 x 5/8CA2-1212................................ 3/4 x 3/4CA2-1414................................ 7/8 x 7/8

* CA2-1717..................... 1-1/16 x 1-1/16

Bulkhead Nipple M/MBSPP x JIC

P/Number ................................... Thread* CR2-0609Z............................ 3/8 x 9/16

CR2-0814Z.............................. 1/2 x 7/8

Nipple M/MBSPT x JIC

P/Number....................................ThreadCB2-0206 ................................1/8 x 3/8CB2-0207 ..............................1/8 x 7/16CB2-0208 ................................1/8 x 1/2CB2-0209 ..............................1/8 x 9/16CB2-0407 ..............................1/4 x 7/16CB2-0408 ................................1/4 x 1/2CB2-0409 ..............................1/4 x 9/16CB2-0412 ................................1/4 x 3/4CB2-0414 ................................1/4 x 7/8CB2-0607 ..............................3/8 x 7/16CB2-0608 ................................3/8 x 1/2CB2-0609 ..............................3/8 x 9/16CB2-0612 ................................3/8 x 3/4CB2-0614 ................................3/8 x 7/8CB2-0617 .......................... 3/8 x 1-1/16CB2-0807 ..............................1/2 x 7/16CB2-0809 ..............................1/2 x 9/16CB2-0812 ................................1/2 x 3/4CB2-0814 ................................1/2 x 7/8CB2-0817 .......................... 1/2 x 1-1/16CB2-0821 .......................... 1/2 x 1-5/16CB2-1208 ................................3/4 x 1/2CB2-1209 ..............................3/4 x 9/16CB2-1212 ................................3/4 x 3/4CB2-1214 ................................3/4 x 7/8CB2-1217 .......................... 3/4 x 1-1/16

* CB2-1219 .......................... 3/4 x 1-3/16CB2-1221 .......................... 3/4 x 1-5/16CB2-1612 ...................................1 x 3/4CB2-1614 ...................................1 x 7/8CB2-1617 ..............................1 x 1-1/16CB2-1621 ..............................1 x 1-5/16CB2-1626 ................................1 x 1-5/8CB2-2017 ....................... 1-1/4 x 1-1/16CB2-2021 ....................... 1-1/4 x 1-5/16CB2-2026 ......................... 1-1/4 x 1-5/8CB2-2030 ......................... 1-1/4 x 1-7/8

* CB2-2040 ......................... 1-1/4 x 2-1/2CB2-2421 ....................... 1-1/2 x 1-5/16CB2-2426 ......................... 1-1/2 x 1-5/8CB2-2430 ......................... 1-1/2 x 1-7/8CB2-3230 ................................2 x 1-7/8CB2-3240 ................................2 x 2-1/2

Nipple M/MBSPT x SAE

P/Number....................................ThreadCBA2-0410 .............................1/4 x 5/8CBA2-0610 .............................3/8 x 5/8CBA2-0810 .............................1/2 x 5/8

Nipple M/MBSPT x JIS

P/Number................................... ThreadCBJ2-0404 ...............................1/4 x 1/4CBJ2-0606 ...............................3/8 x 3/8CBJ2-0808 ...............................1/2 x 1/2CBJ2-1212 ...............................3/4 x 3/4CBJ2-1616 .....................................1 x 1

Nipple M/MBSPP x JIC

Encapsulated SealIncluded in the supply

P/Number................................... ThreadCR2-0207...............................1/8 x 7/16CR2-0209...............................1/8 x 9/16CR2-0407...............................1/4 x 7/16CR2-0408.................................1/4 x 1/2CR2-0409...............................1/4 x 9/16CR2-0412.................................1/4 x 3/4CR2-0607...............................3/8 x 7/16CR2-0609...............................3/8 x 9/16CR2-0612.................................3/8 x 3/4CR2-0614.................................3/8 x 7/8CR2-0809...............................1/2 x 9/16CR2-0812.................................1/2 x 3/4CR2-0814.................................1/2 x 7/8CR2-0817........................... 1/2 x 1-1/16CR2-1209...............................3/4 x 9/16CR2-1212.................................3/4 x 3/4CR2-1214.................................3/4 x 7/8CR2-1217........................... 3/4 x 1-1/16CR2-1221........................... 3/4 x 1-5/16CR2-1612....................................1 x 3/4CR2-1614....................................1 x 7/8CR2-1617.............................. 1 x 1-1/16CR2-1621.............................. 1 x 1-5/16CR2-1626................................ 1 x 1-5/8CR2-2017........................1-1/4 x 1-1/16CR2-2021........................1-1/4 x 1-5/16CR2-2026..........................1-1/4 x 1-5/8CR2-2030..........................1-1/4 x 1-7/8CR2-2421........................1-1/2 x 1-5/16CR2-2426..........................1-1/2 x 1-5/8CR2-2430..........................1-1/2 x 1-7/8


Section 4Adaptors



P/Number................................... ThreadCP2-0207 ...............................1/8 x 7/16CP2-0209 ...............................1/8 x 9/16CP2-0407 ...............................1/4 x 7/16CP2-0408 .................................1/4 x 1/2CP2-0409 ...............................1/4 x 9/16CP2-0412 .................................1/4 x 3/4CP2-0607 ...............................3/8 x 7/16CP2-0609 ...............................3/8 x 9/16CP2-0612 .................................3/8 x 3/4CP2-0614 .................................3/8 x 7/8CP2-0807 ...............................1/2 x 7/16CP2-0809 ...............................1/2 x 9/16CP2-0812 .................................1/2 x 3/4CP2-0814 .................................1/2 x 7/8CP2-0817 ........................... 1/2 x 1-1/16CP2-1209 ...............................3/4 x 9/16CP2-1212 .................................3/4 x 3/4CP2-1214 .................................3/4 x 7/8CP2-1217 ........................... 3/4 x 1-1/16CP2-1221 ........................... 3/4 x 1-5/16CP2-1612 ....................................1 x 3/4CP2-1614 ....................................1 x 7/8CP2-1617 .............................. 1 x 1-1/16CP2-1621 .............................. 1 x 1-5/16CP2-1626 ................................ 1 x 1-5/8

* CP2-2012 ............................. 1-1/4 x 3/4CP2-2017 ........................1-1/4 x 1-1/16CP2-2021 ........................1-1/4 x 1-5/16CP2-2026 ..........................1-1/4 x 1-5/8CP2-2030 ..........................1-1/4 x 1-7/8CP2-2040 ..........................1-1/4 x 2-1/2CP2-2421 ........................1-1/2 x 1-5/16CP2-2426 ..........................1-1/2 x 1-5/8CP2-2430 ..........................1-1/2 x 1-7/8CP2-3226 ................................ 2 x 1-5/8CP2-3230 ................................ 2 x 1-7/8CP2-3240 ................................ 2 x 2-1/2


1.5mm Orifice

P/Number................................... ThreadZCP2-0609 1.5MM................3/8 x 9/16


Extended

P/Number ................................... Thread* CP2-E90-0409....................... 1/4 x 9/16* CP2-E95-0409....................... 1/4 x 9/16* CP2-E160-0609..................... 3/8 x 9/16* CP2-E90-0609....................... 3/8 x 9/16* CP2-E70-0612......................... 3/8 x 3/4* CP2-E95-0612......................... 3/8 x 3/4

Nipple M/MMetric Port Adaptor

DIN x JIC

P/Number ................................... ThreadCM2-0807 ......................M8x1.0 x 7/16CM2-0809 ......................M8x1.0 x 9/16CM2-1007 ....................M10x1.0 x 7/16CM2-1207 ....................M12x1.5 x 7/16CM2-1209 ....................M12x1.5 x 9/16CM2-1212 ......................M12x1.5 x 3/4CM2-1409 ....................M14x1.5 x 9/16CM2-1412 ......................M14x1.5 x 3/4CM2-1609 ....................M16x1.5 x 9/16CM2-1612 ......................M16x1.5 x 3/4CM2-1614 ......................M16x1.5 x 7/8CM2-1809 ....................M18x1.5 x 9/16CM2-1812 ......................M18x1.5 x 3/4CM2-1814 ......................M18x1.5 x 7/8CM2-1817 ................ M18x1.5 x 1-1/16ZCM2-2009..................M20x1.5 x 9/16CM2-2012 .........................M20x1.5 x 1CM2-2014 ......................M20x1.5 x 7/8CM2-2017 ................ M20x1.5 x 1-1/16CM2-2207 ....................M22x1.5 x 7/16CM2-2209 ....................M22x1.5 x 9/16CM2-2212 ......................M22x1.5 x 3/4CM2-2214 ......................M22x1.5 x 7/8CM2-2217 ................ M22x1.5 x 1-1/16CM2-2614 ......................M26x1.5 x 7/8CM2-2617 ................ M26x1.5 x 1-1/16CM2-2621 ................ M26x1.5 x 1-5/16CM2-2717 ................ M27x2.0 x 1-1/16CM2-2817 ................ M28x2.0 x 1-1/16CM2-2821 ................ M28x2.0 x 1-5/16CM2-3312 ......................M33x2.0 x 3/4CM2-3317 ................ M33x2.0 x 1-1/16CM2-3321 ................ M33x2.0 x 1-5/16CM2-3326 .................. M33x2.0 x 1-5/8CM2-4221 ................ M42x2.0 x 1-5/16CM2-4226 .................. M42x2.0 x 1-5/8CM2-4230 .................. M42x2.0 x 1-7/8CM2-4826 .................. M48x2.0 x 1-5/8CM2-4830 .................. M48x2.0 x 1-7/8

Nipple M/MMetric Tube Adaptor

Light SeriesDKL x JIC

P/Number ...... Tube OD.............Thread* CM2L-1207....... 6L .... M12x1.5 x 7/16* CM2L-1209....... 6L .... M12x1.5 x 9/16

CM2L-1409....... 8L .... M14x1.5 x 9/16* CM2L-1412....... 8L ...... M14x1.5 x 3/4

CM2L-1809..... 12L .... M18x1.5 x 9/16* CM2L-1812..... 12L ...... M18x1.5 x 3/4

CM2L-2212..... 15L ...... M22x1.5 x 3/4* CM2L-2214..... 15L ...... M22x1.5 x 7/8


Strong SeriesDKS x JIC

P/Number ......Tube OD .............Thread* CM2S-1809 .... 10S ..... M18x1.5 x 9/16* CM2S-2412 .... 16S ....... M24x1.5 x 3/4* CM2S-2417 .... 16S .. M24x1.5 x 1-1/16* CM2S-3014 .... 20S ....... M30x2.0 x 7/8* CM2S-3617 .... 25S .. M36x2.0 x 1-1/16* CM2S-4221 .... 30S .. M42x2.0 x 1-5/16


Light SeriesDKL x BSPP

P/Number ........Tube OD ...........Thread* CMP2L-1404...... 8L ..... M14x1.5 x 1/4* CMP2L-1606.... 10L ..... M16x1.5 x 3/8* CMP2L-1808.... 12L ..... M18x1.5 x 1/2* CMP2L-2212.... 15L ..... M22x1.5 x 3/4

CMP2L-3012.... 22L ..... M30x2.0 x 3/4CMP2L-3616.... 28L .........M36x2.0 x 1

Section 4Adaptors




Strong SeriesDKS x BSPP

P/Number ...... Tube OD............. Thread* CMP2S-1604.......8S ......M16x1.5 x 1/4* CMP2S-1804.....10S ......M18x1.5 x 1/4* CMP2S-1806.....10S ......M18x1.5 x 3/8* CMP2S-2006.....12S ......M20x1.5 x 3/8* CMP2S-2208.....14S ......M22x1.5 x 1/2* CMP2S-2406.....16S ......M24x1.5 x 3/8* CMP2S-2408.....16S ......M24x1.5 x 1/2* CMP2S-3012.....20S ......M30x2.0 x 3/4* CMP2S-3612.....25S ......M36x2.0 x 3/4* CMP2S-4220.....30S .. M42x2.0 x 1-1/4* CMP2S-5224.....38S .. M52x2.0 x 1-1/2

Nipple M/MNPTF x JIC

P/Number....................................ThreadCN2-0207 ..............................1/8 x 7/16CN2-0208 ................................1/8 x 1/2CN2-0209 ..............................1/8 x 9/16CN2-0407 ..............................1/4 x 7/16CN2-0408 ................................1/4 x 1/2CN2-0409 ..............................1/4 x 9/16CN2-0412 ................................1/4 x 3/4CN2-0607 ..............................3/8 x 7/16

* CN2-0608 ................................3/8 x 1/2CN2-0609 ..............................3/8 x 9/16CN2-0612 ................................3/8 x 3/4CN2-0614 ................................3/8 x 7/8CN2-0617 .......................... 3/8 x 1-1/16CN2-0807 ..............................1/2 x 7/16CN2-0809 ..............................1/2 x 9/16CN2-0812 ................................1/2 x 3/4CN2-0814 ................................1/2 x 7/8CN2-0817 .......................... 1/2 x 1-1/16CN2-1207 ..............................3/4 x 7/16CN2-1209 ..............................3/4 x 9/16CN2-1212 ................................3/4 x 3/4CN2-1214 ................................3/4 x 7/8CN2-1217 .......................... 3/4 x 1-1/16

* CN2-1219 .......................... 3/4 x 1-3/16CN2-1221 .......................... 3/4 x 1-5/16

* CN2-1226 ............................ 3/4 x 1-5/8CN2-1614 ...................................1 x 7/8CN2-1617 ..............................1 x 1-1/16CN2-1621 ..............................1 x 1-5/16CN2-1626 ................................1 x 1-5/8CN2-2017 ....................... 1-1/4 x 1-1/16CN2-2021 ....................... 1-1/4 x 1-5/16

* CN2-2026 ......................... 1-1/4 x 1-5/8CN2-2030 ......................... 1-1/4 x 1-7/8CN2-2426 ......................... 1-1/2 x 1-5/8

* CN2-2430 ......................... 1-1/2 x 1-7/8CN2-3230 ................................2 x 1-7/8CN2-3240 ................................2 x 2-1/2

Nipple M/M BSPP x ORFS

P/Number....................................ThreadFP2-0409 ...............................1/4 x 9/16FP2-0611 .............................3/8 x 11/16FP2-0811 .............................1/2 x 11/16FP2-0813 .............................1/2 x 13/16FP2-0816 ....................................1/2 x 1FP2-0819 ........................... 1/2 x 1-3/16FP2-1216 ....................................3/4 x 1FP2-1219 ........................... 3/4 x 1-3/16FP2-1623 ...............................1 x 1-7/16

Nipple M/MS.A.E. ‘O’ Ring Boss

x JIC

P/Number................................... ThreadC3-0609 .................................3/8 x 9/16C3-0707 ...............................7/16 x 7/16C3-0709 ...............................7/16 x 9/16C3-0712 .................................7/16 x 3/4C3-0807 .................................1/2 x 7/16C3-0808 ...................................1/2 x 1/2C3-0809 .................................1/2 x 9/16C3-0907 ...............................9/16 x 7/16

* C3-0908 .................................9/16 x 1/2C3-0909 ...............................9/16 x 9/16C3-0912 .................................9/16 x 3/4C3-0914 .................................9/16 x 7/8C3-1207 .................................3/4 x 7/16C3-1208 ...................................3/4 x 1/2C3-1209 .................................3/4 x 9/16C3-1212 ...................................3/4 x 3/4C3-1214 ...................................3/4 x 7/8C3-1217 ............................. 3/4 x 1-1/16C3-1221 ............................. 3/4 x 1-5/16C3-1409 .................................7/8 x 9/16C3-1412 ...................................7/8 x 3/4C3-1414 ...................................7/8 x 7/8C3-1417 ............................. 7/8 x 1-1/16C3-1421 ............................. 7/8 x 1-5/16C3-1707 ........................... 1-1/16 x 7/16C3-1709 ........................... 1-1/16 x 9/16C3-1712 ............................. 1-1/16 x 3/4C3-1714 ............................. 1-1/16 x 7/8C3-1717 ........................1-1/16 x 1-1/16C3-1721 ........................1-1/16 x 1-5/16C3-1917 ........................1-3/16 x 1-1/16C3-1919 ........................1-3/16 x 1-3/16C3-2112 ............................. 1-5/16 x 3/4C3-2114 ............................. 1-5/16 x 7/8C3-2117 ........................1-5/16 x 1-1/16C3-2119 ........................1-5/16 x 1-3/16C3-2121 ........................1-5/16 x 1-5/16C3-2126 ..........................1-5/16 x 1-5/8C3-2617 ..........................1-5/8 x 1-1/16C3-2621 ..........................1-5/8 x 1-5/16C3-2626 ............................1-5/8 x 1-5/8C3-2630 ............................1-5/8 x 1-7/8C3-3021 ..........................1-7/8 x 1-5/16C3-3026 ............................1-7/8 x 1-5/8C3-3030 ............................1-7/8 x 1-7/8

* C3-3040 ............................1-7/8 x 2-1/2* C3-4030 ............................2-1/2 x 1-7/8* C3-4040 ............................2-1/2 x 2-1/2


Section 4Adaptors



x ORFS

P/Number................................... ThreadF3-0709................................7/16 x 9/16F3-0711..............................7/16 x 11/16F3-0909................................9/16 x 9/16F3-0911..............................9/16 x 11/16

* F3-1211................................3/4 x 11/16F3-1213................................3/4 x 13/16F3-1416.......................................7/8 x 1F3-1719.........................1-1/16 x 1-3/16F3-1723........................ 1-1/16 x 1-7/16F3-2123.........................1-5/16 x 1-7/16


x BSPT

P/Number................................... ThreadCB3-0904...............................9/16 x 1/4CB3-0906...............................9/16 x 3/8CB3-0908...............................9/16 x 1/2CB3-1204.................................3/4 x 1/4CB3-1206.................................3/4 x 3/8CB3-1208.................................3/4 x 1/2CB3-1212.................................3/4 x 3/4CB3-1404.................................7/8 x 1/4CB3-1406.................................7/8 x 3/8CB3-1408.................................7/8 x 1/2CB3-1412.................................7/8 x 3/4CB3-1708........................... 1-1/16 x 1/2CB3-1712........................... 1-1/16 x 3/4CB3-1716.............................. 1-1/16 x 1CB3-1912........................... 1-3/16 x 3/4CB3-2108........................... 1-5/16 x 1/2CB3-2112........................... 1-5/16 x 3/4CB3-2116.............................. 1-5/16 x 1CB3-2120........................1-5/16 x 1-1/4CB3-2616................................ 1-5/8 x 1CB3-2620..........................1-5/8 x 1-1/4CB3-2624..........................1-5/8 x 1-1/2CB3-3024..........................1-7/8 x 1-1/2


x NPTF

P/Number ................................... ThreadCN3-0904.............................. 9/16 x 1/4CN3-0906.............................. 9/16 x 3/8

* CN3-1204................................ 3/4 x 1/4CN3-1206................................ 3/4 x 3/8

* CN3-1208................................ 3/4 x 1/2CN3-1404................................ 7/8 x 1/4CN3-1406................................ 7/8 x 3/8

* CN3-1408................................ 7/8 x 1/2* CN3-1412................................ 7/8 x 3/4

CN3-1708...........................1-1/16 x 1/2* CN3-1712...........................1-1/16 x 3/4

CN3-1716.............................. 1-1/16 x 1CN3-2112...........................1-5/16 x 3/4

* CN3-2116.............................. 1-5/16 x 1CN3-2120........................1-5/16 x 1-1/4

* CN3-2616................................ 1-5/8 x 1* CN3-2620..........................1-5/8 x 1-1/4

CN3-2624..........................1-5/8 x 1-1/2* CN3-3024..........................1-7/8 x 1-1/2

Extended Nipple M/MS.A.E. ‘O’ Ring Boss

x JIC

P/Number ................................... Thread* C4-0707............................... 7/16 x 7/16

C4-0808................................... 1/2 x 1/2C4-0907............................... 9/16 x 7/16C4-0909............................... 9/16 x 9/16C4-1212................................... 3/4 x 3/4C4-1412................................... 7/8 x 3/4C4-1414................................... 7/8 x 7/8C4-1417..............................7/8 x 1-1/16

* C4-1714..............................1-1/16 x 7/8C4-1717.........................1-1/16 x 1-1/16

* C4-2117.........................1-5/16 x 1-1/16C4-2121.........................1-5/16 x 1-5/16

* C4-2626.............................1-5/8 x 1-5/8

Clamp-on Hosetail M/MBSPT x Tail

P/Number ............... Thread...........HoseCB4-0404 ............... 1/4.................... 1/4CB4-0406 ............... 1/4.................... 3/8CB4-0408 ............... 1/4.................... 1/2CB4-0604 ............... 3/8.................... 1/4CB4-0606 ............... 3/8.................... 3/8CB4-0608 ............... 3/8.................... 1/2CB4-0610 ............... 3/8.................... 5/8CB4-0806 ............... 1/2.................... 3/8CB4-0808 ............... 1/2.................... 1/2CB4-0810 ............... 1/2................... 5/8CB4-0812 ............... 1/2.................... 3/4CB4-0816 ............... 1/2....................... 1CB4-1212 ............... 3/4.................... 3/4CB4-1216 ............... 3/4....................... 1CB4-1220 ............... 3/4.................1-1/4CB4-1612 ............... 1 ....................... 3/4CB4-1616 ............... 1 .......................... 1CB4-1620 ............... 1 ....................1-1/4CB4-1624 ............... 1 ....................1-1/2CB4-2016 ............... 1-1/4 ................... 1CB4-2020 ............... 1-1/4 .............1-1/4CB4-2024 ............... 1-1/4 .............1-1/2CB4-2420 ............... 1-1/2 .............1-1/4CB4-2424 ............... 1-1/2 .............1-1/2CB4-2432 ............... 1-1/2 ................... 2

* CB4-2440 ............... 1-1/2 .............2-1/2CB4-3232 ............... 2 .......................... 2

* CB4-3240 ............... 2 ....................2-1/2* CB4-4040 ............... 2-1/2 .............2-1/2

Clamp-on Hosetail M/MMetric x Tail

P/Number ............... Thread...........HoseCM4-3316 .............. M33 .................... 1CM4-3324 .............. M33 ..............1-1/2

Section 4Adaptors



Clamp-on Hosetail M/MNPTF x Tail

P/Number ............... Thread .......... Hose* CN4-0404............... 1/4.................... 1/4

CN4-0406............... 1/4.................... 3/8CN4-0606............... 3/8.................... 3/8CN4-0608............... 3/8.................... 1/2CN4-0610............... 3/8.................... 5/8

* CN4-0808............... 1/2.................... 1/2* CN4-0810............... 1/2................... 5/8

CN4-1212............... 3/4.................... 3/4CN4-1216............... 3/4....................... 1CN4-1616............... 1.......................... 1CN4-1620............... 1....................1-1/4CN4-1624............... 1....................1-1/2CN4-1626............... 1....................1-5/8CN4-2020............... 1-1/4 .............1-1/4CN4-2024............... 1-1/4 .............1-1/2CN4-2416............... 1-1/2 ................... 1CN4-2420............... 1-1/2 .............1-1/4CN4-2424............... 1-1/2 .............1-1/2CN4-2432............... 1-1/2 ................... 2CN4-3232............... 2......................... 2

Clamp-on Hosetail M/MBSPP x Tail

P/Number ............... Thread .......... HoseCP4-0612 ............... 3/8.................... 3/4CP4-0812 ............... 1/2.................... 3/4CP4-0816 ............... 1/2....................... 1CP4-0820 ............... 1/2.................1-1/4CP4-1212 ............... 3/4.................... 3/4CP4-1216 ............... 3/4....................... 1CP4-1220 ............... 3/4.................1-1/4CP4-1224 ............... 3/4.................1-1/2CP4-1616 ............... 1.......................... 1CP4-1620 ............... 1....................1-1/4CP4-1624 ............... 1....................1-1/2CP4-2016 ............... 1-1/4 ................... 1CP4-2020 ............... 1-1/4 .............1-1/4CP4-2024 ............... 1-1/4 .............1-1/2

* CP4-2032 ............... 1-1/4 ................... 2CP4-2424 ............... 1-1/2 .............1-1/2CP4-2432 ............... 1-1/2 ................... 2CP4-3232 ............... 2.......................... 2

Clamp-on Hosetail M/MS.A.E. ‘O’ Ring Boss x Tail

P/Number................Thread...........HoseC5-1208 .................. 3/4 ....................1/2C5-1212 .................. 3/4 ................... 3/4C5-1408 .................. 7/8 ....................1/2C5-1412 .................. 7/8 ................... 3/4C5-1420 .................. 7/8 .................1-1/4

* C5-1712 .................. 1-1/16...............3/4C5-1716 .................. 1-1/16.................. 1C5-1720 .................. 1-1/16............1-1/4

* C5-2112 .................. 1-5/16.............. 3/4C5-2116 .................. 1-5/16.................. 1C5-2120 .................. 1-5/16............1-1/4C5-2124 .................. 1-5/16............1-1/2C5-2620 .................. 1-5/8..............1-1/4C5-2624 .................. 1-5/8..............1-1/2C5-3024 .................. 1-7/8..............1-1/2

* C5-3032 .................. 1-7/8.................... 2

Clamp-on Hosetail F/MBSPT x Tail

P/Number................Thread...........HoseCB5-1212 ............... 3/4 ....................3/4CB5-1616 ............... 1 .......................... 1CB5-2020 ............... 1-1/4..............1-1/4

Bulkhead Nipple M/MBSPP x BSPP

P/Number....................................ThreadCP6-0404.................................1/4 x 1/4CP6-0606.................................3/8 x 3/8CP6-0808.................................1/2 x 1/2CP6-1212.................................3/4 x 3/4CP6-1616....................................... 1 x 1CP6-2020.......................... 1-1/4 x 1-1/4

Bulkhead Nipple M/MBSPP x BSPP

Encapsulated Seal

P/number.................................... Thread* CR6-0404.................................1/4 x 1/4

CR6-0606.................................3/8 x 3/8CR6-0808.................................1/2 x 1/2CR6-1212.................................3/4 x 3/4CR6-1616.......................................1 x 1

Nipple M/MORFS x JIC

P/Number................................... ThreadF7-0709................................7/16 x 9/16

* F7-0907................................9/16 x 7/16F7-1109..............................11/16 x 9/16F7-1312................................13/16 x 3/4F7-1314................................13/16 x 7/8F7-1614.......................................1 x 7/8F7-1917.........................1-3/16 x 1-1/16F7-2321.........................1-7/16 x 1-5/16


Section 4Adaptors


Socket F/FS.A.E. ‘O’ Ring

P/Number................................... ThreadC9-0707 ...............................7/16 x 7/16C9-0909 ...............................9/16 x 9/16C9-1212 ...................................3/4 x 3/4C9-1414 ...................................7/8 x 7/8C9-1717 ........................1-1/16 x 1-1/16C9-2121 ........................1-5/16 x 1-5/16

* C9-2626 ............................1-5/8 x 1-5/8

Socket F/FBSPT

P/Number................................... ThreadCB9-0202.................................1/8 x 1/8CB9-0402.................................1/4 x 1/8CB9-0404.................................1/4 x 1/4CB9-0602.................................3/8 x 1/8CB9-0604.................................3/8 x 1/4CB9-0606.................................3/8 x 3/8CB9-0804.................................1/2 x 1/4CB9-0806.................................1/2 x 3/8CB9-0808.................................1/2 x 1/2CB9-1208.................................3/4 x 1/2CB9-1212.................................3/4 x 3/4CB9-1612....................................1 x 3/4CB9-1616.......................................1 x 1CB9-2020..........................1-1/4 x 1-1/4CB9-2424..........................1-1/2 x 1-1/2CB9-3232.......................................2 x 2CB9-4040..........................2-1/2 x 2-1/23 x 3

Socket F/FNPTF

P/Number................................... ThreadCN9-0202 ................................1/8 x 1/8CN9-0404 ................................1/4 x 1/4CN9-0606 ................................3/8 x 3/8CN9-0808 ................................1/2 x 1/2CN9-1212 ................................3/4 x 3/4CN9-1616 ......................................1 x 1CN9-2020 .........................1-1/4 x 1-1/4CN9-2424 .........................1-1/2 x 1-1/2CN9-3232 ......................................2 x 2

* CN9-4040 .........................2-1/2 x 2-1/2CN9-4848 ......................................3 x 3

Socket F/FBSPP

P/Number .....................Thread1/8 x 1/8CP9-0404 ................................ 1/4 x 1/4CP9-0606 ................................ 3/8 x 3/8CP9-0808 ................................ 1/2 x 1/2CP9-1212 ................................ 3/4 x 3/4CP9-1616 ...................................... 1 x 1CP9-2020 ..........................1-1/4 x 1-1/4CP9-2424 ..........................1-1/2 x 1-1/2CP9-3232 ...................................... 2 x 23 x 3

Half Socket FS.A.E. ‘O’ Ring

P/Number ................................... ThreadC14-07............................................ 7/16C14-08.............................................. 1/2C14-09............................................ 9/16C14-12.............................................. 3/4C14-14.............................................. 7/8C14-17......................................... 1-1/16C14-21......................................... 1-5/16C14-26........................................... 1-5/81-7/8

Half Socket FBSPT

P/Number ................................... ThreadCB14-02 ........................................... 1/8CB14-04 ........................................... 1/4CB14-06 ........................................... 3/8CB14-08 ........................................... 1/2CB14-12 ........................................... 3/4CB14-16 .............................................. 1CB14-20 ........................................ 1-1/4CB14-24 ........................................ 1-1/2CB14-32 .............................................. 2

Half Socket FBSPP

P/Number ................................... Thread* CP14-06 ........................................... 3/8

CP14-08 ........................................... 1/2CP14-12 ........................................... 3/4CP14-16 .............................................. 1

* CP14-20 ........................................ 1-1/4

Half Socket FNPTF

P/Number ...................................ThreadCN14-02 ........................................... 1/8CN14-04 ........................................... 1/4CN14-06 ........................................... 3/8CN14-08 ........................................... 1/2CN14-12 ........................................... 3/4CN14-16 .............................................. 1

* CN14-20 ........................................1-1/4* CN14-24 ........................................1-1/2

CN14-32 .............................................. 2

Adaptor Fixed M/FBSPT x BSPT

P/Number ...................................ThreadCB18-0202 ..............................1/8 x 1/8CB18-0204 ..............................1/8 x 1/4CB18-0404 ..............................1/4 x 1/4CB18-0406 ..............................1/4 x 3/8CB18-0606 ..............................3/8 x 3/8CB18-0608 ..............................3/8 x 1/2CB18-0808 ..............................1/2 x 1/2CB18-0812 ..............................1/2 x 3/4CB18-1212 ..............................3/4 x 3/4CB18-1616 .................................... 1 x 1

Adaptor Fixed M/FBSPP x NPTF

P/Number ...................................ThreadCPN18-2016............................1-1/4 x 1CPN18-2024..................... 1-1/4 x 1-1/2

Section 4Adaptors



Adaptor Fixed M/FNPTF x NPTF

P/Number ................................... ThreadCN18-0202.............................. 1/8 x 1/8CN18-0204.............................. 1/8 x 1/4CN18-0404.............................. 1/4 x 1/4CN18-0406.............................. 1/4 x 3/8CN18-0606.............................. 3/8 x 3/8CN18-0608.............................. 3/8 x 1/2CN18-0808.............................. 1/2 x 1/2CN18-0812.............................. 1/2 x 3/4CN18-1212.............................. 3/4 x 3/4

* CN18-1616.................................... 1 x 1* CN18-2020....................... 1-1/4 x 1-1/4* CN18-2424....................... 1-1/2 x 1-1/2

Adaptor Fixed F/MBSPT x JIC

P/Number ................................... ThreadCB20-0207 ............................ 1/8 x 7/16CB20-0209 ............................ 1/8 x 9/16CB20-0407 ............................ 1/4 x 7/16CB20-0408 .............................. 1/4 x 1/2CB20-0409 ............................ 1/4 x 9/16CB20-0609 ............................ 3/8 x 9/16CB20-0612 .............................. 3/8 x 3/4CB20-0809 ............................ 1/2 x 9/16CB20-0812 .............................. 1/2 x 3/4CB20-0814 .............................. 1/2 x 7/8CB20-0817 .........................1/2 x 1-1/16CB20-1217 .........................3/4 x 1-1/16CB20-1621 ............................1 x 1-5/16

Gauge Adaptor Fixed F/MBSPP x JIC

P/Number ................................... ThreadCP20-0407G.......................... 1/4 x 7/16CP20-0409G.......................... 1/4 x 9/16CP20-0809G.......................... 1/2 x 9/16

Adaptor Fixed F/MNPTF x JIC

P/Number....................................ThreadCN20-0207 ............................1/8 x 7/16CN20-0208 ..............................1/8 x 1/2CN20-0209 ............................1/8 x 9/16CN20-0407 ............................1/4 x 7/16CN20-0408 ..............................1/4 x 1/2CN20-0409 ............................1/4 x 9/16CN20-0609 ............................3/8 x 9/16CN20-0612 ..............................3/8 x 3/4CN20-0812 ..............................1/2 x 3/4CN20-0814 ..............................1/2 x 7/8CN20-1217 ........................ 3/4 x 1-1/16CN20-1621 ............................1 x 1-5/16

* CN20-2026 ....................... 1-1/4 x 1-5/8* CN20-2430 ....................... 1-1/2 x 1-7/8

CN20-3240 ..............................2 x 2-1/2

Adaptor Fixed M/FS.A.E. ‘O’ Ring Boss

x BSPT

P/Number....................................ThreadCB21-0704 ............................7/16 x 1/4CB21-0904 ............................9/16 x 1/4CB21-0906 ............................9/16 x 3/8CB21-1206 ..............................3/4 x 3/8CB21-1208 ..............................3/4 x 1/2CB21-1406 ..............................7/8 x 3/8CB21-1408 ..............................7/8 x 1/2CB21-1708 ........................ 1-1/16 x 1/2CB21-1712 ........................ 1-1/16 x 3/4

Adaptor Fixed M/FS.A.E. ‘O’ Ring Boss

x NPTF

P/Number................................... Thread* CN21-0704 ............................7/16 x 1/4* CN21-0904 ............................9/16 x 1/4* CN21-0906 ............................9/16 x 3/8* CN21-1206 ..............................3/4 x 3/8* CN21-1208 ..............................3/4 x 1/2

CN21-1408 ..............................7/8 x 1/2* CN21-1708 ........................ 1-1/16 x 1/2* CN21-1712 ........................ 1-1/16 x 3/4* CN21-1716 ........................... 1-1/16 x 1

CN21-2112 ........................ 1-5/16 x 3/4* CN21-2116 ........................... 1-5/16 x 1* CN21-2616 ............................. 1-5/8 x 1* CN21-2620 .......................1-5/8 x 1-1/4

Adaptor Fixed F/M JIC x JIC

P/Number................................... Thread* C22-0707 .............................7/16 x 7/16* C22-0909 .............................9/16 x 9/16* C22-1212 .................................3/4 x 3/4* C22-1414 .................................7/8 x 7/8

C22-1717 ......................1-1/16 x 1-1/16* C22-2121 ......................1-5/16 x 1-5/16

C22-0707Z (0.6mm orifice).7/16x7/16C22-0909Z (0.9mm orifice).9/16x9/16C22-1212Z (0.9mm orifice).....3/4x3/4C22-1414Z (1.2mm orifice).....7/8x7/8

Adaptor Fixed F/MS.A.E. ‘O’ Ring Boss

x BSPT

P/Number................................... ThreadCB22-0906.............................9/16 x 3/8CB22-1206...............................3/4 x 3/8CB22-1208...............................3/4 x 1/2CB22-1406...............................7/8 x 3/8CB22-1408...............................7/8 x 1/2CB22-1712......................... 1-1/16 x 3/4CB22-2116............................ 1-5/16 x 1


Section 4Adaptors


Adaptor F/MS.A.E. ‘O’ Ring Boss

x NPTF

P/Number................................... ThreadCN22-1712 ........................ 1-1/16 x 3/4

Straight Union M/FBSPT x BSPP

P/Number................................... ThreadCB24-0202...............................1/8 x 1/8CB24-0404...............................1/4 x 1/4CB24-0606...............................3/8 x 3/8CB24-0608...............................3/8 x 1/2CB24-0806...............................1/2 x 3/8CB24-0808...............................1/2 x 1/2CB24-1212...............................3/4 x 3/4CB24-1216..................................3/4 x 1CB24-1616.....................................1 x 1CB24-1620.............................. 1 x 1-1/4CB24-1624.............................. 1 x 1-1/2CB24-2020........................1-1/4 x 1-1/4CB24-2424........................1-1/2 x 1-1/2

Straight Union M/FBSPP x BSPP

Encapsulated Seal

P/Number................................... ThreadCR24-0404...............................1/4 x 1/4CR24-0606...............................3/8 x 3/8CR24-0608...............................3/8 x 1/2CR24-0808...............................1/2 x 1/2CR24-1212...............................3/4 x 3/4CR24-1616.....................................1 x 1CR24-2020........................1-1/4 x 1-1/4


P/Number................................... ThreadCP24-0404 ...............................1/4 x 1/4CP24-0606 ...............................3/8 x 3/8CP24-0608 ...............................3/8 x 1/2CP24-0808 ...............................1/2 x 1/2CP24-1212 ...............................3/4 x 3/4CP24-1616 .....................................1 x 1CP24-1620 .............................. 1 x 1-1/4CP24-2020 ........................1-1/4 x 1-1/4


with 7/16" UNO Gauge Point

P/Number ................................... ThreadCP24G-040407............. 1/4 x 1/4 x 7/16CP24G-060607............. 3/8 x 3/8 x 7/16CP24G-080807............. 1/2 x 1/2 x 7/16CP24G-121207............. 3/4 x 3/4 x 7/16CP24G-161607................... 1 x 1 x 7/16CP24G-202007...... 1-1/4 x 1-1/4 x 7/16

Straight Union M/FNPTF x NPSM

P/Number ................................... ThreadCN24-0202.............................. 1/8 x 1/8CN24-0404.............................. 1/4 x 1/4CN24-0606.............................. 3/8 x 3/8

* CN24-0608.............................. 3/8 x 1/2CN24-0808.............................. 1/2 x 1/2CN24-1212.............................. 3/4 x 3/4CN24-1616.................................... 1 x 1CN24-2020........................1-1/4 x 1-1/4CN24-2424........................1-1/2 x 1-1/2

Straight Union F/FBSPT x BSPP

P/Number ................................... ThreadCB25-0404 .............................. 1/4 x 1/4CB25-0606 .............................. 3/8 x 3/8CB25-0808 .............................. 1/2 x 1/2CB25-1212 .............................. 3/4 x 3/4CB25-1616 .................................... 1 x 1

Straight Union F/FNPTF x NPSM

P/Number ................................... Thread* CN25-0404.............................. 1/4 x 1/4

CN25-0606.............................. 3/8 x 3/8CN25-0808.............................. 1/2 x 1/2CN25-1212.............................. 3/4 x 3/4CN25-1616.................................... 1 x 1

Straight Union F/FSWIVEL

x JIC

P/Number ...................................ThreadCS25-0707...........................7/16 x 7/16CS25-0909...........................9/16 x 9/16CS25-1212...............................3/4 x 3/4CS25-1414...............................7/8 x 7/8CS25-1717.................... 1-1/16 x 1-1/16CS25-2121.................... 1-5/16 x 1-5/16

Straight Union M/FS.A.E. ‘O’ Ring Boss

x JIC

P/Number ...................................ThreadC26-0707 .............................7/16 x 7/16C26-0909 .............................9/16 x 9/16C26-0912 ...............................9/16 x 3/4C26-1209 ...............................3/4 x 9/16C26-1212 .................................3/4 x 3/4C26-1414 .................................7/8 x 7/8C26-1417 ............................7/8 x 1-1/16C26-1717 ...................... 1-1/16 x 1-1/16C26-2121 ...................... 1-5/16 x 1-5/16C26-2626 .......................... 1-5/8 x 1-5/8

* C26-3030 .......................... 1-7/8 x 1-7/8Straight Union M/FS.A.E. ‘O’ Ring Boss

x BSPP

P/Number ...................................ThreadCB26-0704 ............................7/16 x 1/4CB26-0904 ............................9/16 x 1/4CB26-1206 ..............................3/4 x 3/8CB26-1208 ..............................3/4 x 1/2CB26-1406 ..............................7/8 x 3/8CB26-1408 ..............................7/8 x 1/2

* CB26-1412 ..............................7/8 x 3/4CB26-1712 .........................1-1/16 x 3/4CB26-2116 ............................1-5/16 x 1

* CB26-2620 ....................... 1-5/8 x 1-1/4

Section 4Adaptors



Straight Union M/FS.A.E. ‘O’ Ring Boss

x NPSM

P/Number ................................... Thread* CN26-1206.............................. 3/4 x 3/8

CN26-1208.............................. 3/4 x 1/2* CN26-1408.............................. 7/8 x 1/2* CN26-1412.............................. 7/8 x 3/4* CN26-1712.........................1-1/16 x 3/4* CN26-2116............................1-5/16 x 1

CN26-2620....................... 1-5/8 x 1-1/4Straight Union M/F

JIC x JICwith 7/16" UNO Gauge Point

P/Number ................................... ThreadC27G-070707........... 7/16 x 7/16 x 7/16C27G-090907........... 9/16 x 9/16 x 7/16C27G-121207............... 3/4 x 3/4 x 7/16C27G-141407............... 7/8 x 7/8 x 7/16C27G-171707.... 1-1/16 x 1-1/16 x 7/16C27G-212107.... 1-5/16 x 1-5/16 x 7/16C27G-262607........ 1-5/8 x 1-5/8 x 7/16

Straight Union M/FBSPT x JIC

P/Number ................................... ThreadCB27-0207 ............................ 1/8 x 7/16CB27-0407 ............................ 1/4 x 7/16CB27-0409 ............................ 1/4 x 9/16CB27-0609 ............................ 3/8 x 9/16CB27-0612 .............................. 3/8 x 3/4CB27-0614 .............................. 3/8 x 7/8CB27-0812 .............................. 1/2 x 3/4CB27-0814 .............................. 1/2 x 7/8CB27-0817 .........................1/2 x 1-1/16CB27-1217 .........................3/4 x 1-1/16CB27-1621 ............................1 x 1-5/16CB27-2026 ....................... 1-1/4 x 1-5/8

Straight Union M/FBSPP x JIC

P/Number....................................ThreadCP27-0407.............................1/4 x 7/16CP27-0409.............................1/4 x 9/16CP27-0609.............................3/8 x 9/16CP27-0612...............................3/8 x 3/4CP27-0614...............................3/8 x 7/8CP27-0812...............................1/2 x 3/4CP27-0814...............................1/2 x 7/8CP27-1214...............................3/4 x 7/8CP27-1217......................... 3/4 x 1-1/16CP27-1617.............................1 x 1-1/16CP27-1621.............................1 x 1-5/16CP27-1626...............................1 x 1-5/8CP27-2021...................... 1-1/4 x 1-5/16CP27-2026........................ 1-1/4 x 1-5/8CP27-2430........................ 1-1/2 x 1-7/8

Straight Union M/FNPTF x JIC

P/Number....................................ThreadCN27-0407 ............................1/4 x 7/16CN27-0409 ............................1/4 x 9/16CN27-0609 ............................3/8 x 9/16CN27-0612 ..............................3/8 x 3/4CN27-0812 ..............................1/2 x 3/4CN27-0814 ..............................1/2 x 7/8CN27-1217 ........................ 3/4 x 1-1/16CN27-1621 ............................1 x 1-5/16

Straight Union M/FBSPP x JIC

Encapsulated Seal

P/Number....................................ThreadCR27-0407 ............................1/4 x 7/16CR27-0409 ............................1/4 x 9/16CR27-0609 ............................3/8 x 9/16CR27-0612 ..............................3/8 x 3/4CR27-0614 ..............................3/8 x 7/8CR27-0812 ..............................1/2 x 3/4CR27-0814 ..............................1/2 x 7/8

* CR27-1214 ..............................3/4 x 7/8* CR27-1217 ........................ 3/4 x 1-1/16

CR27-1617 ............................1 x 1-1/16CR27-1621 ............................1 x 1-5/16CR27-2026 ....................... 1-1/4 x 1-5/8

Straight Union M/FORFS x ORFS

with 7/16" UNO Gauge Point

P/Number................................... ThreadF27G-111107....... 11/16 x 11/16 x 7/16F27G-131307....... 13/16 x 13/16 x 7/16F27G-161607......................1 x 1 x 7/16F27G-191907.....1-3/16 x 1-3/16 x 7/16F27G-232307.....1-7/16 x 1-7/16 x 7/16F27G-272707.1-11/16 x 1-11/16 x 7/16

Gauge Adaptor Union F/F BSPP x JIC Gauge

P/Number................................... ThreadCP28-0409G ..........................1/4 x 9/16

Straight Union M/FORFS x JIC

P/Number................................... ThreadF28-1109............................11/16 x 9/16F28-1312..............................13/16 x 3/4F28-1614.....................................1 x 7/8

* F28-1917.......................1-3/16 x 1-1/16F28-2321.......................1-7/16 x 1-5/16

Straight Union F/MORFS x JIC

P/Number................................... ThreadF29-0907..............................9/16 x 7/16F29-1109............................11/16 x 9/16F29-1312..............................13/16 x 3/4F29-1614.....................................1 x 7/8F29-1917.......................1-3/16 x 1-1/16F29-2321.......................1-7/16 x 1-5/16

* F29-2726.......................1-11/16 x 1-5/8


Section 4Adaptors


45 deg Union M/FJIC x JIC

P/Number................................... ThreadC30-0707F ...........................7/16 x 7/16C30-0709F ...........................7/16 x 9/16C30-0808F ...............................5/8 x 5/8C30-0909F ...........................9/16 x 9/16C30-1212F ...............................3/4 x 3/4C30-1412F ...............................7/8 x 3/4C30-1414F ...............................7/8 x 7/8C30-1717F ....................1-1/16 x 1-1/16C30-2121F ....................1-5/16 x 1-5/16C30-2626F ........................1-5/8 x 1-5/8C30-3030 ..........................1-7/8 x 1-7/8C30-4040 ..........................2-1/2 x 2-1/2

45 deg Union M/FBSPT x BSPP

P/Number................................... ThreadCB30-0202F ............................1/8 x 1/8CB30-0404F ............................1/4 x 1/4CB30-0606F ............................3/8 x 3/8CB30-0808F ............................1/2 x 1/2CB30-1212F ............................3/4 x 3/4CB30-1616F ..................................1 x 1

45 deg Union M/FNPTF x NPSM

P/Number................................... ThreadCN30-0202 ..............................1/8 x 1/8

* CN30-0404 ..............................1/4 x 1/4* CN30-0606 ..............................3/8 x 3/8* CN30-0808 ..............................1/2 x 1/2* CN30-1212 ..............................3/4 x 3/4* CN30-1616 ....................................1 x 1

45 deg Union M/FORFS x ORFS

P/Number................................... ThreadF30-0909..............................9/16 x 9/16F30-1111..........................11/16 x 11/16F30-1313..........................13/16 x 13/16F30-1616........................................1 x 1F30-1919.......................1-3/16 x 1-3/16F30-2323.......................1-7/16 x 1-7/16

45 deg Union M/FS.A.E. ‘O’ Ring Boss

x JIC

P/Number ................................... ThreadC31-0909............................. 9/16 x 9/16C31-1212................................. 3/4 x 3/4C31-1414................................. 7/8 x 7/8

* C31-1717.......................1-1/16 x 1-1/16C31-2121.......................1-5/16 x 1-5/16


x NPSM

P/Number ................................... ThreadCN31-1208.............................. 3/4 x 1/2CN31-1408.............................. 7/8 x 1/2

45 deg Elbow M/MBSPT x BSPT

P/Number ................................... ThreadCB36-0202F............................ 1/8 x 1/8CB36-0404F............................ 1/4 x 1/4CB36-0606F............................ 3/8 x 3/8CB36-0808F............................ 1/2 x 1/2CB36-1208F............................ 3/4 x 1/2CB36-1212F............................ 3/4 x 3/4CB36-1612F............................... 1 x 3/4CB36-1616F.................................. 1 x 1

* CB36-2424 ........................1-1/2 x 1-1/2

Elbow 45 deg M/MNPTF x NPTF

P/Number ................................... ThreadCN36-0202.............................. 1/8 x 1/8

* CN36-0404F............................ 1/4 x 1/4* CN36-0606.............................. 3/8 x 3/8* CN36-0808.............................. 1/2 x 1/2* CN36-1212.............................. 3/4 x 3/4* CN36-1616.................................... 1 x 1

45 deg Elbow M/FBSPT x BSPT

P/Number ...................................ThreadCB37-0202F ............................1/8 x 1/8CB37-0404F ............................1/4 x 1/4CB37-0606F ............................3/8 x 3/8CB37-0808F ............................1/2 x 1/2CB37-1212F ............................3/4 x 3/4CB37-1616F .................................. 1 x 1

45 deg Elbow M/FNPTF x NPTF

P/Number ...................................ThreadCN37-0202F............................1/8 x 1/8CN37-0404F............................1/4 x 1/4CN37-0606F............................3/8 x 3/8CN37-0808F............................1/2 x 1/2CN37-1212F............................3/4 x 3/4CN37-1616F.................................. 1 x 1CN37-2020 ....................... 1-1/4 x 1-1/4

Elbow 45 deg M/MBSPT x JIC

P/Number ...................................ThreadCB38-0207F ..........................1/8 x 7/16CB38-0407F ..........................1/4 x 7/16CB38-0408F ............................1/4 x 1/2CB38-0409F ..........................1/4 x 9/16CB38-0412F ............................1/4 x 3/4CB38-0609F ..........................3/8 x 9/16CB38-0612F ............................3/8 x 3/4CB38-0614 ..............................3/8 x 7/8CB38-0809F ..........................1/2 x 9/16CB38-0812F ............................1/2 x 3/4CB38-0814F ............................1/2 x 7/8CB38-0817F .......................1/2 x 1-1/16CB38-1214F ............................3/4 x 7/8CB38-1217F .......................3/4 x 1-1/16CB38-1221F .......................3/4 x 1-5/16CB38-1621F ..........................1 x 1-5/16CB38-1626F ............................1 x 1-1/2CB38-2026F ..................... 1-1/4 x 1-1/2CB38-2430 ....................... 1-1/2 x 1-7/8CB38-3240 ..............................2 x 2-1/2

Section 4Adaptors



Elbow 45 deg M/MBSPT x JIS

P/Number ................................... Thread* CBJ38-0404 ............................ 1/4 x 1/4

CBJ38-0606 ............................ 3/8 x 3/8CBJ38-0808 ............................ 1/2 x 1/2CBJ38-1212 ............................ 3/4 x 3/4CBJ38-1616 .................................. 1 x 1

45 deg Elbow. M/MBSPP x JIC

P/Number ................................... ThreadCP38-0407F .......................... 1/4 x 7/16CP38-0409F .......................... 1/4 x 9/16CP38-0412F ............................ 1/4 x 3/4CP38-0609F .......................... 3/8 x 9/16CP38-0612F ............................ 3/8 x 3/4CP38-0809F .......................... 1/2 x 9/16CP38-0812F ............................ 1/2 x 3/4CP38-0814F ............................ 1/2 x 7/8CP38-0817F .......................1/2 x 1-1/16CP38-1212F ............................ 3/4 x 3/4CP38-1217F .......................3/4 x 1-1/16CP38-1621 ............................1 x 1-5/16CP38-2026F ..................... 1-1/4 x 1-5/8

* CP38-2430 ....................... 1-1/2 x 1-7/8

45 deg Elbow. M/MNPTF x JIC

P/Number....................................ThreadCN38-0207F..........................1/8 x 7/16CN38-0407F..........................1/4 x 7/16CN38-0409F..........................1/4 x 9/16CN38-0412F............................1/4 x 3/4CN38-0609F..........................3/8 x 9/16CN38-0612F............................3/8 x 3/4CN38-0614 ..............................3/8 x 7/8CN38-0809F..........................1/2 x 9/16CN38-0812F............................1/2 x 3/4CN38-0814F............................1/2 x 7/8CN38-1212 ................................... 35.60CN38-1214F............................3/4 x 7/8CN38-1217F...................... 3/4 x 1-1/16CN38-1221 ................................... 52.00CN38-1617F..........................1 x 1-1/16CN38-1621F..........................1 x 1-5/16CN38-1626 ..............................1 x 1-5/8CN38-2021 ..................... 1-1/4 x 1-5/16CN38-2026F..................... 1-1/4 x 1-5/8CN38-2030 ....................... 1-1/4 x 1-7/8CN38-2430 ....................... 1-1/2 x 1-7/8CN38-3230 ..............................2 x 1-7/8CN38-3240 ..............................2 x 2-1/2

45 deg Elbow. F/FBSPT x BSPT

P/Number....................................ThreadCB39-0404F ............................1/4 x 1/4CB39-0606F ............................3/8 x 3/8CB39-0808F ............................1/2 x 1/2CB39-1212F ............................3/4 x 3/4CB39-1616F .................................. 1 x 1

45 deg Elbow. M/MS.A.E. ‘O’ Ring Boss

x JIC

P/Number................................... ThreadC40-0707F ...........................7/16 x 7/16C40-0907F ...........................9/16 x 7/16C40-0909F ...........................9/16 x 9/16C40-0912F .............................9/16 x 3/4C40-1209F .............................3/4 x 9/16C40-1212F ...............................3/4 x 3/4C40-1214F ...............................3/4 x 7/8C40-1412F ...............................7/8 x 3/4C40-1414F ...............................7/8 x 7/8C40-1417F ......................... 7/8 x 1-1/16C40-1712 ........................... 1-1/16 x 3/4C40-1714F ......................... 1-1/16 x 7/8C40-1717F ....................1-1/16 x 1-1/16C40-1721F ....................1-1/16 x 1-5/16C40-2117F ....................1-5/16 x 1-1/16C40-2121F ....................1-5/16 x 1-5/16C40-2126F ......................1-5/16 x 1-5/8C40-2621F ......................1-5/8 x 1-5/16C40-2626F ........................1-5/8 x 1-5/8C40-3030 ..........................1-7/8 x 1-7/8

* C40-4040 ..........................2-1/2 x 2-1/2

Clamp-on 45 deg Elbow. M/MS.A.E. ‘O’ Ring Boss x Tail

P/Number...............Thread............HoseC41-1212 ...............3/4 .....................3/4

* C41-1408 ...............7/8 .....................1/2C41-1716 ...............1-1/16...................1

* C41-2116 ...............1-5/16...................1* C41-2120 ...............1-5/16............ 1-1/4* C41-2124 ...............1-5/16............ 1-1/2* C41-2620 ...............1-5/8.............. 1-1/4* C41-2624 ...............1-5/8.............. 1-1/2


Section 4Adaptors


Clamp-on 45 deg Elbow. M/MBSPT x Tail

P/Number................Thread ...........HoseCB41-0808..............1/2 ....................1/2

* CB41-0812..............1/2 ....................3/4CB41-1212..............3/4 ....................3/4CB41-1216..............3/4 .......................1CB41-1616..............1 ..........................1CB41-1620..............1 ................... 1-1/4CB41-2020..............1-1/4............. 1-1/4CB41-2024..............1-1/4............. 1-1/2

Clamp-on 45 deg Elbow. M/MNPTF x Tail

P/Number................Thread ...........Hose* CN41-0608 .............3/8 ....................1/2* CN41-0812 .............1/2 ....................3/4

CN41-1212 .............3/4 ....................3/4CN41-1216 .............3/4 .......................1CN41-1220 .............3/4 ................ 1-1/4CN41-1616 .............1 ..........................1CN41-1620 .............1 ................... 1-1/4

* CN41-2020 .............1-1/4............. 1-1/4

Bulkhead Elbow 45 deg. M/M JIC x JIC

P/Number................................... ThreadC42-0707 .............................7/16 x 7/16C42-0909 .............................9/16 x 9/16C42-1212 .................................3/4 x 3/4C42-1414 .................................7/8 x 7/8C42-1717 ......................1-1/16 x 1-1/16C42-2121 ......................1-5/16 x 1-5/16

* C42-2626 ..........................1-5/8 x 1-5/8

90 deg Union M/FJIC x JIC

P/Number ................................... ThreadC46-0707F .......................... 7/16 x 7/16C46-0808F .............................. 1/2 x 1/2C46-0909F .......................... 9/16 x 9/16C46-1212F .............................. 3/4 x 3/4C46-1214F .............................. 3/4 x 7/8C46-1412F .............................. 7/8 x 3/4C46-1414F .............................. 7/8 x 7/8C46-1417F .........................7/8 x 1-1/16C46-1714F .........................1-1/16 x 7/8C46-1717F ....................1-1/16 x 1-1/16C46-2121F ....................1-5/16 x 1-5/16C46-2626F ...........................1-5/8 1-5/8C46-3030F ........................1-7/8 x 1-7/8C46-4040...........................2-1/2 x 2-1/2

90 deg Union M/F BSPT x BSPP

P/Number ................................... ThreadCB46-0202F............................ 1/8 x 1/8CB46-0404F............................ 1/4 x 1/4CB46-0406F............................ 1/4 x 3/8CB46-0604F............................ 3/8 x 1/4CB46-0606F............................ 3/8 x 3/8CB46-0608F............................ 3/8 x 1/2CB46-0806F............................ 1/2 x 3/8CB46-0808F............................ 1/2 x 1/2CB46-1208F............................ 3/4 x 1/2CB46-1212F............................ 3/4 x 3/4CB46-1616F.................................. 1 x 1CB46-2020 ........................1-1/4 x 1-1/4CB46-2424 ........................1-1/2 x 1-1/2CB46-3232 .................................... 2 x 2

90 deg Union M/FBSPP x BSPP

P/Number ................................... ThreadCP46-0404F ............................ 1/4 x 1/4CP46-0606F ............................ 3/8 x 3/8CP46-0808F ............................ 1/2 x 1/2CP46-1212F ............................ 3/4 x 3/4CP46-1216F ............................... 3/4 x 1CP46-1616F .................................. 1 x 1

90 deg Union M/FNPTF x NPSM

P/Number ...................................ThreadCN46-0202 ..............................1/8 x 1/8CN46-0404F............................1/4 x 1/4CN46-0606F............................3/8 x 3/8CN46-0808F............................1/2 x 1/2CN46-1212F............................3/4 x 3/4CN46-1616F.................................. 1 x 1

90 deg Union M/FORFS x ORFS

P/Number ...................................ThreadF46-0909F ...........................9/16 x 9/16F46-1111F .......................11/16 x 11/16F46-1313F .......................13/16 x 13/16F46-1616F ..................................... 1 x 1F46-1919F .................... 1-3/16 x 1-3/16F46-2323F .................... 1-7/16 x 1-7/16


x JIC

P/Number ...................................ThreadC47-0707F...........................7/16 x 7/16C47-0909F...........................9/16 x 9/16C47-1209F.............................3/4 x 9/16C47-1212F...............................3/4 x 3/4C47-1412F...............................7/8 x 3/4C47-1414F...............................7/8 x 7/8C47-1717F.................... 1-1/16 x 1-1/16C47-2121F.................... 1-5/16 x 1-5/16

Section 4Adaptors




x BSPP

P/Number ................................... ThreadCB47-0904F.......................... 9/16 x 1/4CB47-0906F.......................... 9/16 x 3/8CB47-1206F............................ 3/4 x 3/8CB47-1208F............................ 3/4 x 1/2CB47-1408F............................ 7/8 x 1/2CB47-1712F.......................1-1/16 x 3/4CB47-2116F..........................1-5/16 x 1


x NPSM

P/Number ................................... Thread* CN47-0904............................ 9/16 x 1/4* CN47-1206.............................. 3/4 x 3/8* CN47-1208.............................. 3/4 x 1/2* CN47-1408.............................. 7/8 x 1/2* CN47-1712.........................1-1/16 x 3/4* CN47-2116............................1-5/16 x 1* CN47-2620....................... 1-5/8 x 1-1/4

90 deg Elbow F/FBSPT x JIC

P/Number ................................... ThreadCB48-0209F.......................... 1/8 x 9/16CB48-1217F.......................3/4 x 1-1/16

90 deg Elbow M/MSAE O-Ring Boss x SAE O-Ring Boss

P/Number....................................ThreadZC52-0909F ........................9/16 x 9/16ZC52-1212...............................3/4 x 3/4ZC52-1412...............................7/8 x 3/4ZC52-1717.................... 1-1/16 x 1-1/16

90 deg Elbow M/MBSPT x BSPT

P/Number....................................ThreadCB53-0202F ............................1/8 x 1/8CB53-0402F ............................1/4 x 1/8CB53-0404F ............................1/4 x 1/4CB53-0604F ............................3/8 x 1/4CB53-0606F ............................3/8 x 3/8CB53-0804F ............................1/2 x 1/4CB53-0806F ............................1/2 x 3/8CB53-0808F ............................1/2 x 1/2CB53-1208F ............................3/4 x 1/2CB53-1212F ............................3/4 x 3/4CB53-1612F ...............................1 x 3/4CB53-1616F .................................. 1 x 1CB53-2012F ........................ 1-1/4 x 3/4CB53-2016F ............................1-1/4 x 1CB53-2020F ..................... 1-1/4 x 1-1/4CB53-2424F ..................... 1-1/2 x 1-1/2CB53-3232 .................................... 2 x 2

90 deg Elbow M/MBSPT Swivel x BSPT

P/Number....................................ThreadCBS53-0606 ............................3/8 x 3/8CBS53-0808 ............................1/2 x 1/2CBS53-1208 ............................3/4 x 1/2

* CBS53-1212 ............................3/4 x 3/4

90 deg Elbow M/MBSPP x BSPT

P/Number................................... ThreadCPB53-0404F ..........................1/4 x 1/4CPB53-0406F ..........................1/4 x 3/8CPB53-0604F ..........................3/8 x 1/4CPB53-0606F ..........................3/8 x 3/8CPB53-0608F ..........................3/8 x 1/2CPB53-0806F ..........................1/2 x 3/8CPB53-0808F ..........................1/2 x 1/2CPB53-0812F .........................1 2/ x 3/4CPB53-1212F ..........................3/4 x 3/4CPB53-1612F .............................1 x 3/4CPB53-1616F ................................1 x 1CPB53-2020F ...................1-1/4 x 1-1/4CPB53-2424F ...................1-1/2 x 1-1/2

90 deg Elbow M/MBSPP Swivel x BSPT

P/Number................................... ThreadCPBS53-0606 ..........................3/8 x 3/8CPBS53-0808 ..........................1/2 x 1/2CPBS53-1208 ..........................3/4 x 1/2

90 deg Elbow M/MORFS x ORFS

P/Number................................... ThreadF53-0909..............................9/16 x 9/16F53-1111..........................11/16 x 11/16F53-1313..........................13/16 x 13/16F53-1616........................................1 x 1F53-1919.......................1-3/16 x 1-3/16F53-2323.......................1-7/16 x 1-7/16


Section 4Adaptors


90 deg Elbow M/MNPTF x NPTF

P/Number................................... ThreadCN53-0202F ............................1/8 x 1/8CN53-0404F ............................1/4 x 1/4CN53-0604 ..............................3/8 x 1/4CN53-0606F ............................3/8 x 3/8

* CN53-0804 ..............................1/2 x 1/4CN53-0806F ............................1/2 x 3/8CN53-0808F ............................1/2 x 1/2CN53-1208F ............................3/4 x 1/2CN53-1212F ............................3/4 x 3/4CN53-1612F ...............................1 x 3/4CN53-1616F ..................................1 x 1CN53-2020F .....................1-1/4 x 1-1/4CN53-2424F .....................1-1/2 x 1-1/2CN53-3232 ....................................2 x 2

90 deg Elbow M/MBSPP x BSPP

P/Number................................... Thread* CP53-0404 ...............................1/4 x 1/4

CP53-0606 ...............................3/8 x 3/8* CP53-0808 ...............................1/2 x 1/2

90 deg Elbow M/FBSPT x BSPT

P/Number................................... ThreadCB54-0202F ............................1/8 x 1/8CB54-0204F ............................1/8 x 1/4CB54-0404F ............................1/4 x 1/4CB54-0606F ............................3/8 x 3/8CB54-0608F ............................3/8 x 1/2CB54-0806F ............................1/2 x 3/8CB54-0808F ............................1/2 x 1/2CB54-0812F ............................1/2 x 3/4CB54-1208F ............................3/4 x 1/2CB54-1212F ............................3/4 x 3/4CB54-1616F ..................................1 x 1CB54-2020F .....................1-1/4 x 1-1/4CB54-2424........................1-1/2 x 1-1/2CB54-3232.....................................2 x 2

90 deg Elbow M/FNPTF x NPTF

P/Number ................................... ThreadCN54-0202F............................ 1/8 x 1/8CN54-0204F............................ 1/8 x 1/4CN54-0404F............................ 1/4 x 1/4CN54-0406F............................ 1/4 x 3/8CN54-0606F............................ 3/8 x 3/8CN54-0806F............................ 1/2 x 3/8CN54-0808F............................ 1/2 x 1/2CN54-1212F............................ 3/4 x 3/4

* CN54-1216F............................... 3/4 x 1CN54-1616F.................................. 1 x 1CN54-2020F......................1-1/4 x 1-1/4CN54-2424........................1-1/2 x 1-1/2CN54-3232.................................... 2 x 2

90 deg Elbow M/FBSPP x SAE ’O’ Ring

P/Number ................................... ThreadCPU54-0609F ....................... 3/8 x 9/16

90 deg Elbow M/FSAE ’O’ Ring Boss

x SAE ’O’ Ring

P/Number ................................... ThreadCU54-0909F........................ 9/16 x 9/16CU54-1209F.......................... 3/4 x 9/16

90 deg Elbow F/FBSPT x BSPT

P/Number ................................... ThreadCB55-0202F............................ 1/8 x 1/8CB55-0404F............................ 1/4 x 1/4CB55-0606F............................ 3/8 x 3/8CB55-0806F............................ 1/2 x 3/8CB55-0808F............................ 1/2 x 1/2CB55-1208F............................ 3/4 x 1/2CB55-1212F............................ 3/4 x 3/4CB55-1616F.................................. 1 x 1CB55-2020F......................1-1/4 x 1-1/4CB55-2424 ........................1-1/2 x 1-1/2

90 deg Elbow F/FNPTF x NPTF

P/Number ...................................ThreadCN55-0202F............................1/8 x 1/8CN55-0404F............................1/4 x 1/4CN55-0606F............................3/8 x 3/8CN55-0806 ..............................1/2 x 3/8CN55-0808F............................1/2 x 1/2CN55-1208 ..............................3/4 x 1/2CN55-1212F............................3/4 x 3/4CN55-1616F.................................. 1 x 1CN55-2020F..................... 1-1/4 x 1-1/4

* CN55-2424 ....................... 1-1/2 x 1-1/290 deg Elbow M/M

BSPT x JIC

P/Number ...................................Thread* CB56-0206F ............................1/8 x 3/8

CB56-0207F ..........................1/8 x 7/16CB56-0208F ............................1/8 x 1/2CB56-0209F ..........................1/8 x 9/16CB56-0407F ..........................1/4 x 7/16CB56-0408F ............................1/4 x 1/2CB56-0409F ..........................1/4 x 9/16CB56-0412F ............................1/4 x 3/4CB56-0607F ..........................3/8 x 7/16CB56-0609F ..........................3/8 x 9/16CB56-0612F ............................3/8 x 3/4CB56-0614F ............................3/8 x 7/8CB56-0807F ..........................1/2 x 7/16CB56-0809F ..........................1/2 x 9/16CB56-0812F ............................1/2 x 3/4CB56-0814F ............................1/2 x 7/8CB56-0817F .......................1/2 x 1-1/16CB56-1209F ..........................3/4 x 9/16CB56-1212F ............................3/4 x 3/4CB56-1214F ............................3/4 x 7/8CB56-1217F .......................3/4 x 1-1/16CB56-1221F .......................3/4 x 1-5/16CB56-1612F ............................... 1 x 3/4CB56-1614F ............................... 1 x 7/8CB56-1617F ..........................1 x 1-1/16CB56-1621F ..........................1 x 1-5/16CB56-1626F ............................1 x 1-5/8CB56-2017F ................... 1-1/4 x 1-1/16CB56-2021F ................... 1-1/4 x 1-5/16CB56-2026F ..................... 1-1/4 x 1-5/8CB56-2030 ....................... 1-1/4 x 1-7/8CB56-2426F ..................... 1-1/2 x 1-5/8CB56-2430F ..................... 1-1/2 x 1-7/8

* CB56-2440 ....................... 1-1/2 x 2-1/2* CB56-3230 ..............................2 x 1-7/8

CB56-3240 ..............................2 x 2-1/2

Section 4Adaptors



90 deg Elbow M/MBSPT x JIS

P/Number ................................... ThreadCBJ56-0404F .......................... 1/4 x 1/4CBJ56-0606 ............................ 3/8 x 3/8CBJ56-0808 ............................ 1/2 x 1/2CBJ56-1212 ............................ 3/4 x 3/4CBJ56-1616 .................................. 1 x 1

90 deg Elbow M/MBSPP x JIC

P/Number ................................... ThreadCP56-0207F .......................... 1/8 x 7/16CP56-0209F .......................... 1/8 x 9/16CP56-0407F .......................... 1/4 x 7/16CP56-0409F .......................... 1/4 x 9/16CP56-0412F ............................ 1/4 x 3/4CP56-0607F .......................... 3/8 x 7/16CP56-0609F .......................... 3/8 x 9/16CP56-0612F ............................ 3/8 x 3/4CP56-0614F ............................ 3/8 x 7/8CP56-0809F .......................... 1/2 x 9/16CP56-0812F ............................ 1/2 x 3/4CP56-0814F ............................ 1/2 x 7/8CP56-0817F .......................1/2 x 1-1/16CP56-0821F .......................1/2 x 1-5/16CP56-1212F ............................ 3/4 x 3/4CP56-1214F ............................ 3/4 x 7/8CP56-1217F .......................3/4 x 1-1/16CP56-1221F .......................3/4 x 1-5/16CP56-1617F ..........................1 x 1-1/16CP56-1621F ..........................1 x 1-5/16CP56-1626F ............................1 x 1-5/8CP56-2017F ................... 1-1/4 x 1-1/16CP56-2021F ................... 1-1/4 x 1-5/16CP56-2026F ..................... 1-1/4 x 1-5/8CP56-2030F ..................... 1-1/4 x 1-7/8CP56-2421F ................... 1-1/2 x 1-5/16CP56-2426F ..................... 1-1/2 x 1-5/8CP56-2430F ..................... 1-1/2 x 1-7/8CP56-3240 ..............................2 x 2-1/2

90 deg Elbow M/MMetric x JIC

P/Number....................................ThreadCM56-1207F .............. M12x1.5 x 7/16CM56-1409F .............. M14x1.5 x 9/16CM56-1609F .............. M16x1.5 x 9/16CM56-1809F .............. M18x1.5 x 9/16CM56-1812F ................ M18x1.5 x 3/4CM56-2212 .................. M22x1.5 x 3/4

90 deg Elbow M/MNPTF x JIC

P/Number....................................ThreadCN56-0207F..........................1/8 x 7/16CN56-0208F............................1/8 x 1/2CN56-0209F..........................1/8 x 9/16CN56-0407F..........................1/4 x 7/16CN56-0408 ..............................1/4 x 1/2CN56-0409F..........................1/4 x 9/16CN56-0412F............................1/4 x 3/4CN56-0607F..........................3/8 x 7/16CN56-0609F..........................3/8 x 9/16CN56-0612F............................3/8 x 3/4CN56-0614F............................3/8 x 7/8

* CN56-0617 ........................ 3/8 x 1-1/16CN56-0807F..........................1/2 x 7/16CN56-0809F..........................1/2 x 9/16CN56-0812F............................1/2 x 3/4CN56-0814F............................1/2 x 7/8CN56-0817F...................... 1/2 x 1-1/16CN56-1207F..........................3/4 x 7/16CN56-1209F..........................3/4 x 9/16CN56-1212F............................3/4 x 3/4CN56-1214F............................3/4 x 7/8CN56-1217F...................... 3/4 x 1-1/16CN56-1221F...................... 3/4 x 1-5/16CN56-1617F..........................1 x 1-1/16CN56-1621F..........................1 x 1-5/16CN56-1626F............................1 x 1-5/8CN56-2017F................... 1-1/4 x 1-1/16CN56-2021F................... 1-1/4 x 1-5/16CN56-2026F..................... 1-1/4 x 1-5/8CN56-2030F..................... 1-1/4 x 1-7/8CN56-2426F..................... 1-1/2 x 1-5/8CN56-2430 ....................... 1-1/2 x 1-7/8CN56-3240 ..............................2 x 2-1/2

90 deg Elbow M/MBSPP x ORFS

P/Number................................... ThreadFP56-0811F .........................1/2 x 11/16FP56-0813F .........................1/2 x 13/16FP56-0816F ................................1/2 x 1FP56-0819F ....................... 1/2 x 1-3/16FP56-1213F .........................3/4 x 13/16FP56-1216F ................................3/4 x 1

90 deg Elbow M/MBSPT Extended x JIC

P/Number................................... ThreadCB57-0207.............................1/8 x 7/16CB57-0407.............................1/4 x 7/16CB57-0409.............................1/4 x 9/16CB57-0609.............................3/8 x 9/16CB57-0612...............................3/8 x 3/4CB57-0812...............................1/2 x 3/4CB57-0814...............................1/2 x 7/8

* CB57-1217......................... 3/4 x 1-1/16CB57-1621............................ 1 x 1-5/16

90 deg Elbow M/MBSPT Swivel x JIC

P/Number................................... ThreadCBS57-0407 ..........................1/4 x 7/16CBS57-0612 ............................3/8 x 3/4CBS57-0812 ............................1/2 x 3/4CBS57-0814 ............................1/2 x 7/8

* CBS57-0817 ...................... 1/2 x 1-1/16CBS57-1217 ...................... 3/4 x 1-1/16CBS57-1221 ...................... 3/4 x 1-5/16

* CBS57-1621 ......................... 1 x 1-5/16


Section 4Adaptors


90 deg Elbow M/MBSPP Extended x JIC

P/Number................................... ThreadCP57-0612 ...............................3/8 x 3/4CP57-0814 ...............................1/2 x 7/8

* CP57-1217 ......................... 3/4 x 1-1/16* CP57-1221 ......................... 3/4 x 1-5/16* CP57-1621 ............................ 1 x 1-5/16

90 deg Elbow M/MNPTF Extended x JIC

P/Number................................... ThreadCN57-0207 ............................1/8 x 7/16

* CN57-0209 ............................1/8 x 9/16CN57-0407 ............................1/4 x 7/16

* CN57-0409 ............................1/4 x 9/16CN57-0609 ............................3/8 x 9/16

* CN57-0612 ..............................3/8 x 3/4* CN57-0812 ..............................1/2 x 3/4

CN57-0814 ..............................1/2 x 7/8* CN57-1212 ..............................3/4 x 3/4* CN57-1217 ........................ 3/4 x 1-1/16* CN57-1621 ........................... 1 x 1-5/16

90 deg Elbow M/MJIC x JIC

P/Number ................................... ThreadC58-0606................................. 3/8 x 3/8C58-0707F .......................... 7/16 x 7/16C58-0808F .............................. 1/2 x 1/2C58-0908............................... 9/16 x 1/2C58-0909F .......................... 9/16 x 9/16C58-1209F ............................ 3/4 x 9/16C58-1212F .............................. 3/4 x 3/4C58-1412F .............................. 7/8 x 3/4C58-1414F .............................. 7/8 x 7/8C58-1712F .........................1-1/16 x 3/4C58-1714F .........................1-1/16 x 7/8C58-1717F ....................1-1/16 x 1-1/16C58-2117F ....................1-5/16 x 1-1/16C58-2121F ....................1-5/16 x 1-5/16C58-2626F ........................1-5/8 x 1-5/8C58-3030F ........................1-7/8 x 1-7/8

90 deg Elbow F/MBSPT x JIC

P/Number ................................... ThreadCB58-0407F.......................... 1/4 x 7/16CB58-0409F.......................... 1/4 x 9/16CB58-0609F.......................... 3/8 x 9/16CB58-0612F............................ 3/8 x 3/4CB58-0614F............................ 3/8 x 7/8CB58-0812F............................ 1/2 x 3/4CB58-0814F............................ 1/2 x 7/8CB58-1217F.......................3/4 x 1-1/16CB58-1621F..........................1 x 1-5/16

90 deg Elbow F/MNPTF x JIC

P/Number ................................... Thread* CN58-0207F.......................... 1/8 x 7/16

CN58-0407F.......................... 1/4 x 7/16CN58-0409F.......................... 1/4 x 9/16

* CN58-0612.............................. 3/8 x 3/4CN58-0812F............................ 1/2 x 3/4

* CN58-1217.........................3/4 x 1-1/16* CN58-1621............................1 x 1-5/16

90 deg Elbow M/MS.A.E. ‘O’ Ring Boss

x JIC

P/Number ...................................ThreadC59-0707F...........................7/16 x 7/16C59-0708F.............................7/16 x 1/2C59-0709F...........................7/16 x 9/16C59-0712 ...............................7/16 x 3/4C59-0807F.............................1/2 x 7/16C59-0808F...............................1/2 x 1/2C59-0809F.............................1/2 x 9/16C59-0907F...........................9/16 x 7/16C59-0908F.............................9/16 x 1/2C59-0909F...........................9/16 x 9/16C59-0912F.............................9/16 x 3/4C59-1207F.............................3/4 x 7/16C59-1208F...............................3/4 x 1/2C59-1209F.............................3/4 x 9/16C59-1212F...............................3/4 x 3/4C59-1214F...............................3/4 x 7/8C59-1217F..........................3/4 x 1-1/16C59-1221 ............................3/4 x 1-5/16C59-1409F.............................7/8 x 9/16C59-1412F...............................7/8 x 3/4C59-1414F...............................7/8 x 7/8C59-1417F..........................7/8 x 1-1/16C59-1421F..........................7/8 x 1-5/16C59-1709F........................1-1/16 x 9/16C59-1712F..........................1-1/16 x 3/4C59-1714F..........................1-1/16 x 7/8C59-1717F.................... 1-1/16 x 1-1/16C59-1721F.................... 1-1/16 x 1-5/16C59-2117F.................... 1-5/16 x 1-1/16C59-2121F.................... 1-5/16 x 1-5/16C59-2126F...................... 1-5/16 x 1-5/8C59-2621F...................... 1-5/8 x 1-5/16C59-2626F........................ 1-5/8 x 1-5/8C59-2630 .......................... 1-5/8 x 1-7/8C59-3021F...................... 1-7/8 x 1-5/16C59-3026 .......................... 1-7/8 x 1-5/8C59-3030 .......................... 1-7/8 x 1-7/8C59-4040 .......................... 2-1/2 x 2-1/2

Section 4Adaptors




x ORFS

P/Number ................................... ThreadF59-0709F........................... 7/16 x 9/16F59-0909F........................... 9/16 x 9/16F59-0911F......................... 9/16 x 11/16F59-1211F........................... 3/4 x 11/16F59-1213F........................... 3/4 x 13/16F59-1416F.................................. 7/8 x 1F59-1719F.................... 1-1/16 x 1-3/16F59-2123F.................... 1-5/16 x 1-7/16

90 deg Elbow M/MS.A.E. ‘O’ Ring Boss Swivel

x JIC

P/Number ................................... ThreadCS59-1212 .............................. 3/4 x 3/4CS59-1214 .............................. 3/4 x 7/8CS59-1412 .............................. 7/8 x 3/4CS59-1414 .............................. 7/8 x 7/8

* CS59-1417 .........................7/8 x 1-1/16CS59-1717 ................... 1-1/16 x 1-1/16

90 deg Elbow M/MS.A.E. ‘O’ Ring Boss Ext.

x JIC

P/Number ................................... ThreadCE59-0909 .......................... 9/16 x 9/16CE59-0912 ............................ 9/16 x 3/4CE59-1209 ............................ 3/4 x 9/16CE59-1212 .............................. 3/4 x 3/4CE59-1214 .............................. 3/4 x 7/8CE59-1409 ............................ 7/8 x 9/16CE59-1412 .............................. 7/8 x 3/4CE59-1414 .............................. 7/8 x 7/8CE59-1417 .........................7/8 x 1-1/16CE59-1717 ................... 1-1/16 x 1-1/16


Ext. Swivel x JIC

P/Number....................................ThreadCES59-1212 ............................3/4 x 3/4

* CES59-1214 ............................3/4 x 7/8CES59-1412 ............................7/8 x 3/4

* CES59-1414 ............................7/8 x 7/8

90 deg Elbow M/MSAE O-Ring Boss x JIC

Orifice Elbow 0.9mm

P/Number....................................ThreadZC59-0909...........................9/16 x 9/16


x BSPT

P/Number....................................ThreadCB59-0704F ..........................7/16 x 1/4CB59-0904F ..........................9/16 x 1/4CB59-0906F ..........................9/16 x 3/8CB59-1204F ............................3/4 x 1/4CB59-1206F ............................3/4 x 3/8CB59-1208F ............................3/4 x 1/2CB59-1212F ............................3/4 x 3/4CB59-1404F ............................7/8 x 1/4CB59-1406F ............................7/8 x 3/8CB59-1408F ............................7/8 x 1/2CB59-1412F ............................7/8 x 3/4CB59-1708F ...................... 1-1/16 x 1/2CB59-1712F ...................... 1-1/16 x 3/4CB59-1716 ............................1-1/16 x 1CB59-2112F ...................... 1-5/16 x 3/4CB59-2116F ..........................1-5/16 x 1


x NPTF

P/Number................................... ThreadCN59-0904 ............................9/16 x 1/4CN59-0906 ............................9/16 x 3/8CN59-1206 ..............................3/4 x 3/8

* CN59-1208 ..............................3/4 x 1/2* CN59-1212 ..............................3/4 x 3/4* CN59-1408 ..............................7/8 x 1/2

CN59-1412 ..............................7/8 x 3/4

Clamp-on 90 deg Elbow M/MS.A.E. ‘O’ Ring Boss x Tail

P/Number................Thread ...........Hose* C60-0905 ................9/16 ................5/16* C60-0906 ................9/16 ..................3/8* C60-0908 ................9/16 ..................1/2

C60-1208 ................3/4 ....................1/2* C60-1210 ................3/4 ....................5/8

C60-1212 ................3/4 ....................3/4C60-1412 ................7/8 ...................3/4

* C60-1416 ................7/8 .......................1C60-1420 ................7/8 ................ 1-1/4

* C60-1710 ................1-1/16...............5/8C60-1712 ................1-1/16 ..............3/4C60-1716 ................1-1/16 .................1C60-1720 ................1-1/16 .......... 1-1/4

* C60-1724 ................1-1/16........... 1-1/2C60-2112 ................1-5/16...............3/4C60-2116 ................1-5/16..................1C60-2120 ................1-5/16........... 1-1/4C60-2124 ................1-5/16........... 1-1/2C60-2620 ................1-5/8............. 1-1/4C60-2624 ................1-5/8............. 1-1/2C60-3024 ................1-7/8............. 1-1/2


Section 4Adaptors


Clamp-on 90 deg Elbow M/MBSPT x Tail

P/Number................Thread ...........HoseCB60-0204..............1/8 ....................1/4

* CB60-0404..............1/4 ....................1/4* CB60-0405..............1/4 ..................5/16

CB60-0406..............1/4 ....................3/8* CB60-0606..............3/8 ....................3/8* CB60-0608..............3/8 ....................1/2

CB60-0610..............3/8 ....................5/8CB60-0612..............3/8 ....................3/4CB60-0806..............1/2 ....................3/8CB60-0808..............1/2 ....................1/2

* CB60-0810..............1/2 ....................5/8CB60-0812..............1/2 ....................3/4

* CB60-1208..............3/4 ....................1/2CB60-1212..............3/4 ....................3/4CB60-1216..............3/4 .......................1CB60-1220..............3/4 ................ 1-1/4CB60-1612..............1 .......................3/4CB60-1616..............1 ..........................1CB60-1620..............1 ................... 1-1/4CB60-1624..............1 ................... 1-1/2

* CB60-2012..............1-1/4.................3/4CB60-2016..............1-1/4....................1CB60-2020..............1-1/4............. 1-1/4CB60-2024..............1-1/4............. 1-1/2CB60-2032..............1-1/4....................2CB60-2420..............1-1/2............. 1-1/4CB60-2424..............1-1/2............. 1-1/2CB60-2432..............1-1/2....................2CB60-3232..............2 ..........................2

Clamp-on 90 deg Elbow M/MBSPP x Tail

P/Number................Thread ...........HoseCP60-0608 ..............3/8 ....................1/2CP60-0612 ..............3/8 ....................1/2CP60-0812 ..............1/2 ................... 3/4CP60-0816 ..............1/2 ...................... 1CP60-1212 ..............3/4 ....................3/4CP60-1216 ..............3/4 .......................1CP60-1220 ..............3/4 ................ 1-1/4CP60-1612 ..............1 .......................3/4CP60-1616 ..............1 ..........................1CP60-1620 ..............1 ................... 1-1/4CP60-1624 ..............1 ................... 1-1/2CP60-1632 ..............1 ..........................2CP60-2016 ..............1-1/4....................1CP60-2020 ..............1-1/4............. 1-1/4CP60-2024 ..............1-1/4............. 1-1/2CP60-2032 ..............1-1/4....................2CP60-2424 ..............1-1/2............. 1-1/2CP60-2432 ..............1-1/2 ...................2

Clamp-on 90 deg Elbow M/MNPTF x Tail

P/Number ............... Thread .......... HoseCN60-0404............. 1/4.................... 1/4CN60-0406............. 1/4.................... 3/8

* CN60-0408............. 1/4.................... 1/2CN60-0410............. 1/4.................... 5/8CN60-0606............. 3/8.................... 3/8CN60-0608............. 3/8.................... 1/2

* CN60-0610............. 3/8.................... 5/8CN60-0612............. 3/8.................... 3/4

* CN60-0808............. 1/2.................... 1/2CN60-0812............. 1/2................... 3/4

* CN60-1212............. 3/4.................... 3/4CN60-1216............. 3/4................ 113/4CN60-1616............. 1.......................... 1

* CN60-1620............. 1.................... 1-1/4* CN60-1624............. 1.................... 1-1/2

CN60-2020............. 1-1/4 ............. 1-1/4CN60-2024............. 1-1/4 ............. 1-1/2CN60-2424............. 1-1/2 ............. 1-1/2

* CN60-2432............. 1-1/2 ................... 2

90 deg Elbow M/MJIC x JIC Bulkhead

P/Number ................................... ThreadC61-0707............................. 7/16 x 7/16

* C61-0808................................. 1/2 x 1/2C61-0909............................. 9/16 x 9/16C61-1212................................. 3/4 x 3/4C61-1414................................. 7/8 x 7/8C61-1717.......................1-1/16 x 1-1/16C61-2121.......................1-5/16 x 1-5/16C61-2626...........................1-5/8 x 1-5/8C61-3030...........................1-7/8 x 1-7/8

90 deg Elbow M/MSAE x SAE Bulkhead

P/Number ...................................ThreadCA61-1010 ..............................5/8 x 5/8CA61-1212 ..............................3/4 x 3/4CA61-1414 ..............................7/8 x 7/8

Tee M/M/FBSPT x BSPT x BSPP

P/Number ...................................ThreadCB61-040404F ...............1/4 x 1/4 x 1/4CB61-060606F ...............3/8 x 3/8 x 3/8CB61-080808F ...............1/2 x 1/2 x 1/2CB61-121212F ...............3/4 x 3/4 x 3/4CB61-161616F ........................ 1 x 1 x 1

Tee M/M/FORFS x ORFS x ORFS

P/Number ...................................Thread* F61-090909F ............9/16 x 9/16 x 9/16* F61-111111F ......11/16 x 11/16 x 11/16* F61-131313F ......13/16 x 13/16 x 13/16* F61-161616F ........................... 1 x 1 x 1* F61-191919F ..1-3/16 x 1-3/16 x 1-3/16

Tee M/M/MBSPT x BSPT x BSPT

P/Number ...................................ThreadCB62-020202F ...............1/8 x 1/8 x 1/8CB62-040404F ...............1/4 x 1/4 x 1/4CB62-060606F ...............3/8 x 3/8 x 3/8CB62-080808F ...............1/2 x 1/2 x 1/2CB62-121208F ............. 3/4 X 3/4 X 1/2CB62-121212F ...............3/4 x 3/4 x 3/4CB62-161616F ........................ 1 x 1 x 1CB62-202020 .......1-1/4 x 1-1/4 x 1-1/4CB62-242424 .......1-1/2 x 1-1/2 x 1-1/2CB62-323232 .......................... 2 x 2 x 2

Section 4Adaptors



Tee M/M/MNPTF x NPTF x NPTF

P/Number ................................... ThreadCN62-020202................. 1/8 x 1/8 x 1/8CN62-040404F............... 1/4 x 1/4 x 1/4CN62-060606F............... 3/8 x 3/8 x 3.8CN62-080808F............... 1/2 x 1/2 x 1/2CN62-121212F............... 3/4 x 3/4 x 3/4

* CN62-161616.......................... 1 x 1 x 1

Tee M/M/MBSPP x BSPP x JIC

P/Number ................................... Thread* ZCP62-080814 ............... 1/2 x 1/2 x 7/8

Tee M/M/MJIC x JIC x JIC

P/Number ................................... ThreadC63-070707F ........... 7/16 x 7/16 x 7/16C63-080808F ................. 1/2 x 1/2 x 1/2C63-090909F ........... 9/16 x 9/16 x 9/16C63-121209F ............. 3/4 X 3/4 X 9/16C63-120912F ............... 3/4 x 9/16 x 3/4C63-121212F ................. 3/4 x 3/4 x 3/4C63-121214F ................. 3/4 x 3/4 x 7/8C63-121217F ............3/4 x 3/4 x 1-1/16C63-141214F ................. 7/8 x 3/4 x 7/8

* C63-141412F ................. 7/8 x 3/4 x 7/8C63-141414F ................. 7/8 x 7/8 x 7/8C63-141417F ............7/8 x 7/8 x 1-1/16C63-171414F ............1-1/16 x 7/8 x 7/8C63-171417......... 1-1/16 x 7/8 x 1-1/16C63-171712F ...... 1-1/16 x 1-1/16 x 3/4C63-171714F ...... 1-1/16 x 1-1/16 x 7/8C63-171717F . 1-1/16 x 1-1/16 x 1-1/16C63-212114F ...... 1-5/16 x 1-5/16 x 7/8C63-212117F . 1-5/16 x 1-5/16 x 1-1/16C63-212121F . 1-5/16 x 1-5/16 x 1-5/16C63-262626F ....... 1-5/8 x 1-5/8 x 1-5/8C63-303030.......... 1-7/8 x 1-7/8 x 1-7/8C63-404040.......... 2-1/2 x 2-1/2 x 2-1/2

Tee M/M/MORFS x ORFS x ORFS

P/Number....................................ThreadF63-090909F ............9/16 x 9/16 x 9/16F63-111111F ......11/16 x 11/16 x 11/16F63-131313F ......13/16 x 13/16 x 13/16F63-161616F ........................... 1 x 1 x 1F63-191919F ..1-3/16 x 1-3/16 x 1-3/16F63-232323 ....1-7/16 x 1-7/16 x 1-7/16

Tee F/F/FBSPT x BSPT x BSPT

P/Number....................................ThreadCB63-020202F ...............1/8 x 1/8 x 1/8CB63-040404F ...............1/4 x 1/4 x 1/4CB63-060606F ...............3/8 x 3/8 x 3/8CB63-080808F ...............1/2 x 1/2 x 1/2CB63-121212F ...............3/4 x 3/4 x 3/4CB63-161616 .......................... 1 x 1 x 1CB63-202020 .......1-1/4 x 1-1/4 x 1-1/4CB63-242424 .......1-1/2 x 1-1/2 x 1-1/2CB63-323232 .......................... 2 x 2 x 2

Tee F/F/FNPTF x NPTF x NPTF

P/Number....................................ThreadCN63-020202F...............1/8 x 1/8 x 1/8CN63-040404F...............1/4 x 1/4 x 1/4CN63-060606F...............3/8 x 3/8 x 3/8CN63-080808F...............1/2 x 1/2 x 1/2CN63-121212F...............3/4 x 3/4 x 3/4CN63-161616 .......................... 1 x 1 x 1CN63-202020 .......1-1/4 x 1-1/4 x 1-1/4CN63-242424 .......1-1/2 x 1-1/2 x 1-1/2CN63-323232 .......................... 2 x 2 x 2

Tee F/M/MJIC x JIC x JIC

P/Number................................... ThreadC64-070707F ........... 7/16 x 7/16 x 7/16C64-080808F ................. 1/2 x 1/2 x 1/2C64-090909F ........... 9/16 x 9/16 x 9/16C64-121212F ................. 3/4 x 3/4 x 3/4C64-141414F ................. 7/8 x 7/8 x 7/8C64-171717F . 1-1/16 x 1-1/16 x 1-1/16C64-172117F . 1-1/16 x 1-5/16 x 1-1/16C64-212117F . 1-5/16 x 1-5/16 x 1-1/16C64-212121F ... 1-5/16 x 1-5/16 x 1-5/1C64-262626 ......... 1-5/8 x 1-5/8 x 1-5/8C64-303030 ......... 1-7/8 x 1-7/8 x 1-7/8C64-404040 ......... 2-1/2 x 2-1/2 x 2-1/2

Tee F/M/MORFS x ORFS x ORFS

P/Number................................... ThreadF64-090909F............ 9/16 x 9/16 x 9/16F64-111111F...... 11/16 x 11/16 x 11/16F64-131313F...... 13/16 x 13/16 x 13/16F64-161616F............................1 x 1 x 1F64-191919F.. 1-3/16 x 1-3/16 x 1-3/16F64-232323.... 1-7/16 x 1-7/16 x 1-7/16

Tee M/F/FBSPT x BSPT x BSPT

P/Number................................... ThreadCB64-020202F .............. 1/8 x 1/8 x 1/8CB64-040404F .............. 1/4 x 1/4 x 1/4CB64-060606F .............. 3/8 x 3/8 x 3/8CB64-080808F .............. 1/2 x 1/2 x 1/2CB64-121212F .............. 3/4 x 3/4 x 3/4CB64-161616...........................1 x 1 x 1CB64-202020....... 1-1/4 x 1-1/4 x 1-1/4CB64-242424....... 1-1/2 x 1-1/2 x 1-1/2


Section 4Adaptors


Tee M/F/FNPTF x NPTF x NPTF

P/Number................................... ThreadCN64-020202F .............. 1/8 x 1/8 x 1/8CN64-040404F .............. 1/4 x 1/4 x 1/4CN64-060606F .............. 3/8 x 3/8 x 3/8CN64-080808F .............. 1/2 x 1/2 x 1/2CN64-121212F .............. 3/4 x 3/4 x 3/4CN64-161616 ..........................1 x 1 x 1CN64-202020 ...... 1-1/4 x 1-1/4 x 1-1/4

Tee M/M/FJIC x JIC x JIC

P/Number................................... ThreadC65-070707F ........... 7/16 x 7/16 x 7/16

* C65-080808 ................... 1/2 x 1/2 x 1/2C65-090909F ........... 9/16 x 9/16 x 9/16C65-121212F ................. 3/4 x 3/4 x 3/4C65-141414F ................. 7/8 x 7/8 x 7/8C65-171717F . 1-1/16 x 1-1/16 x 1-1/16C65-212121F . 1-5/16 x 1-5/16 x 1-5/16C65-262626 ......... 1-5/8 x 1-5/8 x 1-5/8C65-303030 ......... 1-7/8 x 1-7/8 x 1-7/8C65-404040 ......... 2-1/2 x 2-1/2 x 2-1/2

Tee M/M/MJIC x JIC x BSPT

P/Number ................................... ThreadCB65-070702F........... 7/16 x 7/16 x 1/8CB65-070704F........... 7/16 x 7/16 x 1/4CB65-090904F........... 9/16 x 9/16 x 1/4CB65-090906F........... 9/16 x 9/16 x 3/8CB65-121204F............... 3/4 x 3/4 x 1/4CB65-121206F............... 3/4 x 3/4 x 3/8CB65-121208F............... 3/4 x 3/4 x 1/2CB65-121212F............... 3/4 x 3/4 x 3/4CB65-141406F............... 7/8 x 7/8 x 3/8CB65-141408F............... 7/8 x 7/8 x 1/2CB65-141412F............... 7/8 x 7/8 x 3/4CB65-171712F.... 1-1/16 x 1-1/16 x 3/4CB65-212116F........1-5/16 x 1-5/16 x 1CB65-262620 ....... 1-5/8 x 1-5/8 x 1-1/4CB65-303024 ....... 1-7/8 x 1-7/8 x 1-1/2

Tee M/M/MJIC x JIC x BSPP

P/Number ................................... ThreadCP65-070704F ........... 9/16 x 9/16 x 1/4CP65-090904F ........... 9/16 x 9/16 x 1/4CP65-090906F ........... 9/16 x 9/16 x 3/8CP65-090908F ........... 9/16 x 9/16 x 1/2CP65-121206F ............... 3/4 x 3/4 x 3/8CP65-121208F ............... 3/4 x 3/4 x 1/2CP65-141408F ............... 7/8 x 7/8 x 1/2CP65-141412F ............... 7/8 x 7/8 x 3/4CP65-171712F .... 1-1/16 x 1-1/16 x 3/4CP65-212116F ........1-5/16 x 1-5/16 x 1

Tee M/M/MBSPT X BSPP X BSPT

P/Number ................................... Thread* CBP65-040404F............. 1/4 x 1/4 x 1/4* CBP65-121212F............. 3/4 x 3/4 x 3/4

Tee M/M/MJIC x JIC x NPTF

P/Number ...................................ThreadCN65-070702F...........7/16 x 7/16 x 1/8CN65-070704F...........7/16 x 7/16 x 1/4CN65-080804 .................1/2 x 1/2 x 1/4CN65-090904F...........9/16 x 9/16 x 1/4CN65-090906F...........9/16 x 9/16 x 3/8CN65-121206F...............3/4 x 3/4 x 3/8CN65-121208F...............3/4 x 3/4 x 1/2CN65-141408F...............7/8 x 7/8 x 1/2CN65-141412F...............7/8 x 7/8 x 3/4CN65-171708F.... 1-1/16 x 1-1/16 x 1/2

* CN65-171712 ...... 1-1/16 x 1-1/16 x 3/4CN65-212116 ......... 1-5/16 x 1-5/16 x 1

Tee F/F/MBSPP x BSPP x BSPT

P/Number ...................................ThreadCBS66-040404 ...............1/4 x 1/4 x 1/4CBS66-060606 ...............3/8 x 3/8 x 3/8CBS66-080808 ...............1/2 x 1/2 x 1/2

Tee F/F/MNPTF x NPTF x NPTF

P/Number ...................................ThreadCN66-020202F...............1/8 x 1/8 x 1/8CN66-040404F...............1/4 x 1/4 x 1/4CN66-060606F...............3/8 x 3/8 x 3/8CN66-080808F...............1/2 x 1/2 x 1/2CN66-121212F...............3/4 x 3/4 x 3/4

* CN66-161616 .......................... 1 x 1 x 1* CN66-202020 .......1-1/4 x 1-1/4 x 1-1/4

Tee M/M/MJIC x BSPT x JIC

P/Number ...................................ThreadCB67-070207F ...........7/16 x 1/8 x 7/16CB67-070407F ...........7/16 x 1/4 x 7/16CB67-090409F ...........9/16 x 1/4 x 9/16CB67-090609F ...........9/16 x 3/8 x 9/16CB67-120612F ...............3/4 x 3/8 x 3/4CB67-120812F ...............3/4 x 1/2 x 3/4CB67-140814F ...............7/8 x 1/2 x 7/8CB67-171217F .... 1-1/16 x 3/4 x 1-1/16CB67-211621F ....... 1-5/16 x 1 x 1-5/16

Section 4Adaptors



Tee M/M/MJIC x BSPP x JIC

P/Number ................................... ThreadCP67-070407F ........... 7/16 x 1/4 x 7/16CP67-090409F ........... 9/16 x 1/4 x 9/16CP67-090609F ........... 9/16 x 3/8 x 9/16CP67-120612F ............... 3/4 x 3/8 x 3/4CP67-120812F ............... 3/4 x 1/2 x 3/4CP67-140814F ............... 7/8 x 1/2 x 7/8

* CP67-170817 ...... 1-1/16 x 1/2 x 1-1/16CP67-171217F .... 1-1/16 x 3/4 x 1-1/16CP67-211621F ....... 1-5/16 x 1 x 1-5/16

* CP67-262026 ....... 1-5/8 x 1-1/4 x 1-5/8* CP67-262426 ....... 1-5/8 x 1-1/2 x 1-5/8* CP67-302430 ....... 1-7/8 x 1-1/2 x 1-7/8

Tee M/M/MJIC x NPT x JIC

P/Number ................................... ThreadCN67-070207F........... 7/16 x 1/8 x 7/16

* CN67-070407............. 7/16 x 1/4 x 7/16CN67-080208................. 1/2 x 1/8 x 1/2CN67-080408................. 1/2 x 1/4 x 1/2CN67-090409F........... 9/16 x 1/4 x 9/16

* CN67-090609F........... 9/16 x 3/8 x 9/16CN67-120612F............... 3/4 x 3/8 x 3/4CN67-120812F............... 3/4 x 1/2 x 3/4CN67-140814F............... 7/8 x 1/2 x 7/8CN67-171217F.... 1-1/16 x 3/4 x 1-1/16CN67-211621F....... 1-5/16 x 1 x 1-5/16

Tee M/M/MJIC x JIC x

S.A.E. ‘O’ Ring Boss

P/Number ................................... ThreadC68-070707F ........... 7/16 x 7/16 x 7/16C68-090907F ........... 9/16 x 9/16 x 7/16C68-090909F ........... 9/16 x 9/16 x 9/16C68-090912F ............. 9/16 x 9/16 x 3/4C68-121209F ............... 3/4 x 3/4 x 9/16C68-121212F ................. 3/4 x 3/4 x 3/4C68-141214.................... 7/8 x 3/4 x 7/8C68-141412F ................. 7/8 x 7/8 x 3/4C68-141414F ................. 7/8 x 7/8 x 7/8C68-171717F ... 1-1/16 x 1-1/16 x 1-1/6

* C68-212117.... 1-5/16 x 1-5/16 x 1-1/16C68-212121.... 1-5/16 x 1-5/16 x 1-5/16

* C68-262626.......... 1-5/8 x 1-5/8 x 1-5/8

Tee M/M/MS.A.E. ‘O’ Ring Boss

x JIC x JIC

P/Number....................................ThreadC69-070707F............7/16 x 7/16 x 7/16C69-080808F..................1/2 x 1/2 x 1/2C69-090909F............9/16 x 9/16 x 9/16C69-120909F..............3/4 x 9/16 x 9/16C69-121212F..................3/4 x 3/4 x 3/4C69-141212F..................7/8 x 3/4 x 3/4C69-141414F..................7/8 x 7/8 x 7/8C69-141717F....... 7/8 x 1-1/16 x 1-1/16C69-171414F............ 1-1/16 x 7/8 x 7/8C69-171712 ....1-1/16 x 1-1/16 x 1-1/16C69-171717F..1-1/16 x 1-1/16 x 1-1/16

* C69-211717 ....1-5/16 x 1-1/16 x 1-1/16C69-212121F..1-5/16 x 1-5/16 x 1-5/16

Tee F/M/MBSPP x BSPT x BSPT

P/Number....................................ThreadCB69-040404F ...............1/4 x 1/4 x 1/4CB69-060606F ...............3/8 x 3/8 x 3/8CB69-080808F ...............1/2 x 1/2 x 1/2CB69-121204F ...............3/4 x 3/4 x 1/4CB69-121212F ...............3/4 x 3/4 x 3/4CB69-161616F ........................ 1 x 1 x 1CB69-202020 .......1-1/4 x 1-1/4 x 1-1/4

Tee M/M/MJIC x JIC x JIC Bulkhead

P/Number................................... ThreadC70-070707 ............. 7/16 x 7/16 x 7/16C70-090909 ............. 9/16 x 9/16 x 9/16C70-121212 ................... 3/4 x 3/4 x 3/4C70-141414 ................... 7/8 x 7/8 x 7/8C70-171717 ... 1-1/16 x 1-1/16 x 1-1/16C70-212121 ... 1-5/16 x 1-5/16 x 1-5/16

* C70-262626 ......... 1-5/8 x 1-5/8 x 1-5/8

Tee M/M/MJIC x JIC Bulkhead x JIC

P/Number................................... ThreadC71-070707 ............. 7/16 x 7/16 x 7/16C71-090909 ............. 9/16 x 9/16 x 9/16C71-121212 ................... 3/4 x 3/4 x 3/4C71-141414 ................... 7/8 x 7/8 x 7/8C71-171717 ... 1-1/16 x 1-1/16 x 1-1/16C71-212121 ... 1-5/16 x 1-5/16 x 1-5/16

* C71-262626 ......... 1-5/8 x 1-5/8 x 1-5/8

Tee M/M/MJIC x JIC Bulkhead x BSPP

P/Number................................... ThreadZCP71-090904........... 9/16 x 9/16 x 1/4


Section 4Adaptors


Cross M/M/M/M4 x JIC

P/Number................................... ThreadC72-07X4 .......................................7/16C72-09X4 .......................................9/16C72-12X4 .........................................3/4C72-14X4 .........................................7/8C72-17X4 ................................... 1-1/16

* C72-21X4 ................................... 1-5/16

Cross M/M/M/M4 x ORFX

P/Number................................... ThreadF72-11X4......................................11/16

Cross F/F/F/F4 x BSPT

P/Number................................... ThreadCB72-04X4.......................................1/4CB72-06X4.......................................3/8CB72-08X4.......................................1/2CB72-12X4.......................................3/4CB72-16X4..........................................1

Cross F/F/F/F4 x NPTF

P/Number................................... Thread* CN72-02X4.......................................1/8

CN72-04X4.......................................1/4CN72-06X4.......................................3/8CN72-08X4.......................................1/2

* CN72-12X4.......................................3/4* CN72-16X4..........................................1

Reducing Bush M/FBSPT x BSPT

P/Number ................................... ThreadCB73-0402 .............................. 1/4 x 1/8CB73-0602 .............................. 3/8 x 1/8CB73-0604 .............................. 3/8 x 1/4CB73-0802 .............................. 1/2 x 1/8CB73-0804 .............................. 1/2 x 1/4CB73-0806 .............................. 1/2 x 3/8CB73-1204 .............................. 3/4 x 1/4CB73-1206 .............................. 3/4 x 3/8CB73-1208 .............................. 3/4 x 1/2CB73-1606 ................................. 1 x 3/8CB73-1608 ................................. 1 x 1/2CB73-1612 ................................. 1 x 3/4CB73-2008 ...........................1-1/4 x 1/2CB73-2012 ...........................1-1/4 x 3/4CB73-2016 .............................. 1-1/4 x 1CB73-2412 ...........................1-1/2 x 3/4CB73-2416 .............................. 1-1/2 x 1CB73-2420 ........................1-1/2 x 1-1/4CB73-3216 .................................... 2 x 1CB73-3220 .............................. 2 x 1-1/4CB73-3224 .............................. 2 x 1-1/2

Reducing Bush M/FBSPP x BSPP

Encapsulated Seal

P/Number ................................... ThreadCR73-0604 .............................. 3/8 x 1/4CR73-1608 ................................. 1 x 1/2CR73-1612 ................................. 1 x 3/4CR73-2016 .............................. 1-1/4 x 1CR73-2416 .............................. 1-1/2 x 1CR73-2420 ........................1-1/2 x 1-1/4


Style A

P/Number .....................Thread1/4 x 1/8CP73-0602...............................3/8 x 1/8CP73-0604...............................3/8 x 1/4CP73-0804...............................1/2 x 1/4CP73-0806...............................1/2 x 3/8CP73-1206...............................3/4 x 3/8CP73-1208...............................3/4 x 1/2CP73-1612.................................. 1 x 3/4CP73-2016...............................1-1/4 x 1CP73-2416...............................1-1/2 x 1CP73-2420........................ 1-1/2 x 1-1/4CP73-3224...............................2 x 1-1/2


Style B

P/Number ...................................ThreadCP73-1204...............................3/4 x 1/4CP73-1608.................................. 1 x 1/2CP73-2012............................1-1/4 x 3/4

* CP73-3212.................................. 2 x 3/4* CP73-3216..................................... 2 x 1

CP73-3220...............................2 x 1-1/4

Reducing Bush M/FBSPP x BSPT

Style A

P/Number ...................................ThreadCPB73-2420 ..................... 1-1/2 x 1-1/4

Section 4Adaptors



Reducing Bush M/FBSPP x BSPT

Style B

P/Number ................................... Thread* CPB73-0804............................ 1/2 x 1/4* CPB73-1206............................ 3/4 x 3/8* CPB73-2012.........................1-1/4 x 3/4* CPB73-2412.........................1-1/2 x 3/4* CPB73-2416............................1-1/2 x 1* CPB73-2420..................... 1-1/2 x 1-1/4

Reducing Bush M/FNPTF x NPTF

P/Number ................................... ThreadCN73-0402.............................. 1/4 x 1/8CN73-0602.............................. 3/8 x 1/8CN73-0604.............................. 3/8 x 1/4CN73-0802.............................. 1/2 x 1/8CN73-0804.............................. 1/2 x 1/4CN73-0806.............................. 1/2 x 3/8CN73-1202.............................. 3/4 x 1/8CN73-1204.............................. 3/4 x 1/4CN73-1206.............................. 3/4 x 3/8CN73-1208.............................. 3/4 x 1/2

* CN73-1606................................. 1 x 3/8CN73-1608................................. 1 x 1/2CN73-1612................................. 1 x 3/4

* CN73-2008...........................1-1/4 x 1/2CN73-2012...........................1-1/4 x 3/4CN73-2016..............................1-1/4 x 1CN73-2412...........................1-1/2 x 3/4CN73-2416..............................1-1/2 x 1CN73-2420....................... 1-1/2 x 1-1/4

* CN73-3212................................. 2 x 3/4CN73-3216.................................... 2 x 1CN73-3220..............................2 x 1-1/4CN73-3224..............................2 x 1-1/22-1/2 x 1-1/4

Reducing Bush M/FS.A.E. ‘O’ Ring Boss

x S.A.E. ‘O’ Ring Boss

P/Number....................................ThreadC74-0908 ...............................9/16 x 1/2C74-1209 ...............................3/4 x 9/16C74-1409 ...............................7/8 x 9/16C74-1709 ......................... 1-1/16 x 9/16C74-1712 ........................... 1-1/16 x 3/4C74-2112 ........................... 1-5/16 x 3/4C74-2114 ........................... 1-5/16 x 7/8C74-2117 ...................... 1-5/16 x 1-1/16

* C74-2612 ............................. 1-5/8 x 3/4C74-2617 ........................ 1-5/8 x 1-1/16C74-2621 ........................ 1-5/8 x 1-5/16C74-3017 ........................ 1-7/8 x 1-1/16

* C74-3021 ........................ 1-7/8 x 1-5/16


x BSPT

P/Number....................................Thread* CB74-0902 ..............................3/4 x 1/8

CB74-1202 ..............................3/4 x 1/8CB74-1204 ..............................3/4 x 1/4CB74-1402 ..............................7/8 x 1/8CB74-1404 ..............................7/8 x 1/4

* CB74-1406 ..............................7/8 x 3/8CB74-1704 ........................ 1-1/16 x 1/4CB74-1706 ........................ 1-1/16 x 3/8

* CB74-1708 ........................ 1-1/16 x 1/2CB74-2104 ........................ 1-5/16 x 1/4CB74-2106 ........................ 1-5/16 x 3/8CB74-2108 ........................ 1-5/16 x 1/2CB74-2112 ........................ 1-5/16 x 3/4

* CB74-2612 .......................... 1-5/8 x 3/4* CB74-2616 ..............................1-5/8 x 1


x NPTFStyle A

P/Number................................... Thread* CN74-1708 ........................ 1-1/16 x 1/2* CN74-2108 ........................ 1-5/16 x 1/2* CN74-2112 ........................ 1-5/16 x 3/4


x NPTFStyle B

P/Number................................... Thread* CN74-1202 ..............................3/4 x 1/8

CN74-1204 ..............................3/4 x 1/4CN74-1402 ..............................7/8 x 1/8

* CN74-1404 ..............................7/8 x 1/4* CN74-1704 ........................ 1-1/16 x 1/4

CN74-1706 ........................ 1-1/16 x 3/8CN74-2108 ........................ 1-5/16 x 1/2

Plug S.A.E. ‘O’ Ring Boss

P/Number................................... ThreadC77-06 ..............................................3/8C77-07 ............................................7/16C77-08 ..............................................1/2C77-09 ............................................9/16C77-12 ..............................................3/4C77-14 ..............................................7/8C77-17 ........................................ 1-1/16C77-19 ........................................ 1-3/16C77-21 ........................................ 1-5/16C77-26 .......................................... 1-5/8C77-30 .......................................... 1-7/8C77-40 .......................................... 2-1/2


Section 4Adaptors


Plug S.A.E. ‘O’ Ring BossSocket Head

P/Number................................... ThreadC77S-05 ..........................................5/16C77S-06 ............................................3/8C77S-07 ..........................................7/16C77S-08 ............................................1/2C77S-09 ..........................................9/16C77S-12 ............................................3/4C77S-14 ............................................7/8C77S-17 ...................................... 1-1/16

Plug BSPT

P/Number................................... ThreadCB77-02............................................1/8CB77-04............................................1/4CB77-06............................................3/8CB77-08............................................1/2CB77-12............................................3/4CB77-16...............................................1CB77-20........................................ 1-1/4CB77-24........................................ 1-1/2CB77-32...............................................2

* CB77-40........................................ 2-1/2

Plug BSPPEncapsulated Seal

P/Number................................... ThreadCR77-02............................................1/8CR77-04............................................1/4CR77-06............................................3/8CR77-08............................................1/2CR77-12............................................3/4CR77-16...............................................1CR77-20........................................ 1-1/4CR77-24........................................ 1-1/2

Plug BSPP

P/Number ................................... ThreadCP77-02 ........................................... 1/8CP77-04 ........................................... 1/4CP77-06 ........................................... 3/8CP77-08 ........................................... 1/2CP77-12 ........................................... 3/4CP77-16 .............................................. 1CP77-20 ........................................ 1-1/4CP77-24 ........................................ 1-1/2CP77-32 .............................................. 2

Plug BSPPSocket Head

P/Number ................................... ThreadCR77S-02......................................... 1/8CR77S-04......................................... 1/4CR77S-06......................................... 3/8CR77S-08......................................... 1/2CR77S-12......................................... 3/4CR77S-16............................................ 1

Plug NPTF

P/Number ................................... ThreadCN77-02........................................... 1/8CN77-04........................................... 1/4CN77-06........................................... 3/8CN77-08........................................... 1/2CN77-12........................................... 3/4CN77-16.............................................. 1CN77-20........................................ 1-1/4CN77-24........................................ 1-1/2CN77-32.............................................. 22-1/2

Plug Metric1.5mm Pitch

P/Number ................................... ThreadCM77-12 ........................................... 12CM77-14 ........................................... 14CM77-16 ........................................... 16CM77-18 ........................................... 18CM77-20 ........................................... 20CM77-22 ........................................... 22CM77-24 ........................................... 24

Plug JIC

P/Number ...................................ThreadC78-07 ............................................ 7/16C78-08 .............................................. 1/2C78-09 ............................................ 9/16C78-12 .............................................. 3/4C78-14 .............................................. 7/8C78-17 .........................................1-1/16C78-19 .........................................1-3/16C78-21 .........................................1-5/16C78-26 ...........................................1-5/8C78-30 ...........................................1-7/8C78-40 ...........................................2-1/2

Plug ORFS

P/Number ...................................ThreadF78-09 ............................................ 9/16F78-11 .......................................... 11/16F78-13 .......................................... 13/16F78-16 ................................................. 1F78-19 .........................................1-3/16F78-23 .........................................1-7/16F78-27 .......................................1-11/16

Plug Metric Komatsu1.5mm Pitch

P/Number ...................................ThreadCK78-12 ............................................ 12CK78-14 ............................................ 14CK78-16 ............................................ 16CK78-18 ............................................ 18CK78-20 ............................................ 20CK78-22 ............................................ 22CK78-24 ............................................ 12CK78-30 ............................................ 14CK78-33 ............................................ 16CK78-36 ............................................ 18CK78-42 ............................................ 24

Cap Nut JIC

P/Number ...................................ThreadC79-07 ............................................ 7/16C79-08 .............................................. 1/2C79-09 ............................................ 9/16C79-12 .............................................. 3/4C79-14 .............................................. 7/8C79-17 .........................................1-1/16C79-19 .........................................1-3/16C79-21 .........................................1-5/16C79-26 ...........................................1-5/8C79-30 ...........................................1-7/8C79-40 ...........................................2-1/2

Section 4Adaptors



Cap Nut BSPP

P/Number ................................... ThreadCBS79-02......................................... 1/8CBS79-04......................................... 1/4CBS79-06......................................... 3/8CBS79-08......................................... 1/2

* CBS79-10......................................... 5/8CBS79-12......................................... 3/4CBS79-16............................................ 1CBS79-20......................................1-1/4CBS79-24......................................1-1/2CBS79-32............................................ 2

Cap Nut ORFS

P/Number ................................... ThreadF79-09 ............................................ 9/16F79-11 .......................................... 11/16F79-13 .......................................... 13/16F79-16 ................................................. 1F79-19 .........................................1-3/16F79-23 .........................................1-7/16F79-27 .......................................1-11/16

Cap Nut Metric Komatsu1.5mm Pitch

P/Number ................................... ThreadCK79-12......................................... 9/16CK79-14....................................... 11/16CK79-16....................................... 13/16CK79-18.............................................. 1CK79-20......................................1-3/16CK79-22......................................1-7/16CK79-24.............................................. 1CK79-30......................................1-3/16CK79-33......................................1-7/16CK79-36....................................1-11/16CK79-42....................................1-11/16

Bulkhead Nut JIC

P/Number....................................ThreadC80-07 ............................................7/16C80-08 ..............................................1/2C80-09 ............................................9/16C80-12 ..............................................3/4C80-14 ..............................................7/8C80-17 .........................................1-1/16C80-19 .........................................1-3/16C80-21 .........................................1-5/16C80-26 ...........................................1-5/8C80-30 ...........................................1-7/8C80-40 ...........................................2-1/2

Bulkhead Nut BSPP

P/Number....................................ThreadCP80-02............................................1/8CP80-04............................................1/4CP80-06............................................3/8CP80-08............................................1/2CP80-12............................................3/4CP80-16............................................... 1CP80-20.........................................1-1/4CP80-24.........................................1-1/2CP80-32............................................... 2

Bulkhead Nut ORFS

P/Number....................................ThreadF80-11 ..........................................11/16F80-13 ..........................................13/16F80-16 ................................................. 1F80-19 .........................................1-3/16F80-23 .........................................1-7/16F80-27 .......................................1-11/16

Tube Nut & Sleeve AssemblyJIC

(Nut C83-**N. Sleeve C83-**S)

P/Number................(Tube) ....... ThreadC83-07 ....................(1/4)................7/16C83-08 ....................(5/16)................1/2C83-09 ....................(3/8)................9/16C83-12 ....................(1/2)..................3/4C83-14 ....................(5/8)..................7/8C83-17 ....................(3/4)............ 1-1/16C83-19 ....................(7/8)............ 1-3/16C83-21 ....................(1)............... 1-5/16C83-26 ....................(1-1/4) .......... 1-5/8C83-30 ....................(1-1/2) .......... 1-7/8

Tube NutJIC

P/Number................(Tube) ....... ThreadC83-07N .................(1/4)................7/16C83-08N .................(5/16)................1/2C83-09N .................(3/8)................9/16C83-12N .................(1/2)..................3/4C83-14N .................(5/8)..................7/8C83-17N .................(3/4)............ 1-1/16C83-19N .................(7/8)............ 1-3/16C83-21N .................(1)............... 1-5/16C83-26N .................(1-1/4) .......... 1-5/8C83-30N .................(1-1/2) .......... 1-7/8C83-40N .................(2)................. 2-1/2

Tube SleeveJIC

P/Number................(Tube) ....... ThreadC83-07S ..................(1/4)................7/16C83-08S ..................(5/16)................1/2C83-09S ..................(3/8)................9/16C83-12S ..................(1/2)..................3/4C83-14S ..................(5/8)..................7/8C83-17S ..................(3/4)............ 1-1/16C83-19S ..................(7/8)............ 1-3/16C83-21S ..................(1)............... 1-5/16C83-26S ..................(1-1/4) .......... 1-5/8C83-30S ..................(1-1/2) .......... 1-7/8C83-40S ..................(2)................. 2-1/2


Section 4Adaptors


Tube Nut &Sleeve AssemblyORFS

(Nut =F83-**N, Sleeve =F83-**S)

P/Number................(Tube) ....... ThreadF83-09.....................(1/4)................9/16F83-11.....................(3/8)..............11/16F83-13.....................(1/2)..............13/16F83-16.....................(5/8).....................1F83-19.....................(3/4)............ 1-3/16F83-23.....................(1)............... 1-7/16F83-27.....................(1/1/4) ...... 1-11/16

Tube NutORFS

P/Number................(Tube) ....... ThreadF83-09N..................(1/4)................9/16F83-11N..................(3/8)..............11/16F83-13N..................(1/2)..............13/16F83-16N..................(5/8).....................1F83-19N..................(3/4)............ 1-3/16F83-23N..................(1)............... 1-7/16F83-27N..................(1/1/4) ...... 1-11/16

Tube SleeveORFS

P/Number................(Tube) ....... ThreadF83-09S...................(1/4)................9/16F83-11S...................(3/8)..............11/16F83-13S...................(1/2)..............13/16F83-16S...................(5/8).....................1F83-19S...................(3/4)............ 1-3/16F83-23S...................(1)............... 1-7/16

Tube Reducer AssemblyF/M JIC x JIC

Style A(Nut =C83-**N, Reducer =C84-****R)

P/Number ................................... ThreadC84-0907............................. 9/16 x 7/16C84-1209............................... 3/4 x 9/16C84-1409............................... 7/8 x 9/16C84-1707..........................1-1/16 x 7/16C84-1709..........................1-1/16 x 9/16C84-1712............................1-1/16 x 3/4C84-2112............................1-5/16 x 3/4C84-2114............................1-5/16 x 7/8C84-2117.......................1-5/16 x 1-1/16C84-2612..............................1-5/8 x 3/4C84-2617.........................1-5/8 x 1-1/16C84-2621.........................1-5/8 x 1-5/16C84-3021.........................1-7/8 x 1-5/16C84-3026...........................1-7/8 x 1-5/8C84-4030...........................2-1/2 x 1-7/8

Tube ReducerJIC x JIC

Style A(Nut =C83-**N)

P/Number ................................... ThreadC84-0907R.......................... 9/16 x 7/16C84-1207R............................ 3/4 x 7/16C84-1209R............................ 3/4 x 9/16C84-1409R............................ 7/8 x 9/16C84-1707R.......................1-1/16 x 7/16C84-1709R.......................1-1/16 x 9/16C84-1712R.........................1-1/16 x 3/4C84-2112R.........................1-5/16 x 3/4C84-2114R.........................1-5/16 x 7/8C84-2117R....................1-5/16 x 1-1/16C84-2612R...........................1-5/8 x 3/4C84-2617R......................1-5/8 x 1-1/16C84-2621R......................1-5/8 x 1-5/16

* C84-3017R......................1-7/8 x 1-1/16C84-3021R......................1-7/8 x 1-5/16

Tube Reducer FixedF/M JIC x JIC

Style B

P/Number ...................................ThreadC84-1207B ............................3/4 x 7/16C84-1412B ..............................7/8 x 3/4C84-1714B .........................1-1/16 x 7/8C84-3026B ....................... 1-7/8 x 1-5/8C84-4030B ....................... 2-1/2 x 1-7/8

Tube Reducer AssemblyF/M ORFS x ORFS

(Nut = F83-**N, Reducer = F84-****R)

P/Number ...................................ThreadF84-1109 ...........................11/16 x 9/16F84-1309 ...........................13/16 x 9/16F84-1311 .........................13/16 x 11/16F84-1613 ................................ 1 x 13/16F84-1913 ........................1-3/16 x 13/16

Tube Reducer F/MORFS x ORFS

(Nut F83-**N

P/Number ...................................Thread* F84-1109R.........................11/16 x 9/16

F84-1309R.........................13/16 x 9/16* F84-1311R.......................13/16 x 11/16

F84-1613R.............................. 1 x 13/16F84-1913R......................1-3/16 x 13/16

Section 4Adaptors



Tubeweld NippleJIC Male

P/Number ............... Thread .......... TubeC86-0704................ 7/16.................. 1/4C86-0906................ 9/16.................. 3/8C86-0908................ 9/16.................. 1/2C86-1206................ 3/4.................... 3/8C86-1208................ 3/4.................... 1/2C86-1210................ 3/4.................... 5/8C86-1212................ 3/4.................... 3/4C86-1410................ 7/8.................... 5/8C86-1412................ 7/8.................... 3/4C86-1712................ 1-1/16 .............. 3/4C86-1714................ 1-1/16 .............. 7/8C86-1716................ 1-1/16 ................. 1C86-1720................ 1-1/16 ...........1-1/4

* C86-1914................ 1-3/16 .............. 7/8C86-2116................ 1-5/16 ................. 1C86-2120................ 1-5/16 ...........1-1/4C86-2124................ 1-5/16 ...........1-1/2C86-2620................ 1-5/8 .............1-1/4C86-2624................ 1-5/8 .............1-1/2C86-3024................ 1-7/8 .............1-1/2C86-4032................ 2-1/2 ................... 2

Tubeweld NippleORFS

P/Number ............... Thread .......... Tube* F86-0904 ................ 9/16.................. 1/4

F86-0906 ................ 9/16.................. 3/8* F86-1106 ................ 11/16................ 3/8* F86-1308 ................ 13/16................ 1/2* F86-1610 ................ 1....................... 5/8* F86-1912 ................ 1-3/16 .............. 3/4* F86-2316 ................ 1-7/16 ................. 1* F86-2720 ................ 1-11/16 .........1-1/4

Tubeweld NippleBSPT Male

P/Number................Thread...........TubeCB86-0404 ............. 1/4 ....................1/4CB86-0406 ............. 1/4 ....................3/8

* CB86-0604 ............. 3/8 ....................1/4CB86-0606 ............. 3/8 ....................3/8CB86-0608 ............. 3/8 ....................1/2CB86-0610 ............. 3/8 ....................5/8CB86-0806 ............. 1/2 ....................3/8CB86-0808 ............. 1/2 ....................1/2CB86-0810 ............. 1/2 ....................5/8CB86-0812 ............. 1/2 ....................3/4CB86-0816 ............. 1/2 ....................... 1CB86-1212 ............. 3/4 ....................3/4CB86-1216 ............. 3/4 ....................... 1

* CB86-1220 ............. 3/4 .................1-1/4CB86-1612 ............. 1 .......................3/4CB86-1616 ............. 1 .......................... 1CB86-1620 ............. 1 ....................1-1/4CB86-1624 ............. 1 ....................1-1/2CB86-2016 ............. 1-1/4.................... 1CB86-2020 ............. 1-1/4..............1-1/4CB86-2024 ............. 1-1/4..............1-1/2CB86-2420 ............. 1-1/2..............1-1/4CB86-2424 ............. 1-1/2..............1-1/2CB86-3232 ............. 2 ......................... 2

Tubeweld NippleNPTF Male

P/Number................Thread...........Tube* CN86-0406 ............. 1/4 ....................3/8

CN86-0606 ............. 3/8 ....................3/8* CN86-0608 ............. 3/8 ....................1/2

CN86-1212 ............. 3/4 ....................3/4

Tubeweld NippleBSPP Male

P/Number................Thread ...........TubeCP86-0406 ..............1/4 ....................3/8CP86-0608 ..............3/8 ....................1/2CP86-0810 ..............1/2 ....................5/8CP86-1216 ..............3/4 .......................1CP86-1620 ..............1 ................... 1-1/4CP86-2024 ..............1-1/4 ............ 1-1/2

Tubeweld UnionJIC Female

P/Number................Thread ...........TubeC87-0704 ................7/16 ..................1/4C87-0904 ................9/16 ..................1/4C87-0906 ................9/16 ..................3/8C87-1206 ................3/4 ....................3/8C87-1208 ................3/4 ....................1/2C87-1210 ................3/4 ....................5/8C87-1408 ................7/8 ....................1/2C87-1410 ................7/8 ....................5/8C87-1412 ................7/8 ....................3/4C87-1712 ................1-1/16...............3/4C87-1716 ................1-1/16..................1C87H-1716 ............. ............................1C87-2116 ................1-5/16..................1C87-2120 ................1-5/16........... 1-1/4C87-2620 ................1-5/8............. 1-1/4C87-2624 ................1-5/8............. 1-1/2C87-3024 ................1-7/8............. 1-1/2C87-4032 ................2-1/2....................2


Section 4Adaptors


Tubeweld UnionBSPP Female

P/Number................Thread ...........TubeCB87-0404..............1/4 ....................1/4CB87-0406..............1/4 ....................3/8CB87-0606..............3/8 ....................3/8CB87-0808..............1/2 ....................1/2CB87-0810..............1/2 ....................5/8CB87-0812..............1/2 ....................3/4CB87-1212..............3/4 ....................3/4CB87-1616..............1 ..........................1CB87-1620..............1 ................... 1-1/4CB87-2016..............1-1/4....................1CB87-2020..............1-1/4............. 1-1/4CB87-2424..............1-1/2............. 1-1/2

Tubeweld 90 deg ElbowJIC Male

P/Number................Thread ...........Tube* C88-0704 ................7/16 ..................1/4

C88-0906 ................9/16 ..................3/8C88-0908 ................9/16 ..................1/2

* C88-1206 ................3/4 ....................3/8- C88-1208 ................3/4 ....................1/2

C88-1210 ................3/4 ....................5/8* C88-1212 ................3/4 ....................3/4

C88-1410 ................7/8 ....................5/8* C88-1712 ................1-1/16...............3/4

C88-1714 ................1-1/16...............7/8C88-2116 ................1-5/16..................1

* C88-2120 ................1-5/16........... 1-1/4* C88-2620 ................1-5/8............. 1-1/4

Tubeweld FlangeSAE O’Ring

Code 61 (3000 psi)

P/Number ............... Flange........... TubeC92-0808................ 1/2.................... 1/2C92-0810................ 1/2................... 5/8C92-1208................ 3/4.................... 1/2

* C92-1210................ 3/4................... 5/8C92-1212................ 3/4.................... 3/4C92-1216................ 3/4....................... 1C92-1608................ 1....................... 1/2

* C92-1610................ 1....................... 5/8C92-1612................ 1....................... 3/4C92-1616................ 1.......................... 1C92-1620................ 1.................... 1-1/4C92-2012................ 1-1/4 ................ 3/4C92-2016................ 1-1/4 ................... 1C92-2020................ 1-1/4 ............. 1-1/4C92-2024................ 1-1/4 ............. 1-1/2C92-2416................ 1-1/2 ................... 1C92-2420................ 1-1/2 ............. 1-1/4C92-2424................ 1-1/2 ............. 1-1/2

* C92-2432................ 1-1/2 ................... 2C92-3220................ 2.................... 1-1/4C92-3224................ 2.................... 1-1/2C92-3232................ 2.......................... 2

* C92-4032................ 2-1/2 ................... 2C92-4040................ 2-1/2 ............. 2-1/290 Duro ‘O’ Ring supplied

Tubeweld FlangeSAE O’Ring

Code 62 (6000 psi)

P/Number ............... Flange........... TubeC92H-0808............. 1/2.................... 1/2C92H-0812............. 1/2.................... 3/4C92H-1212............. 3/4.................... 3/4

* C92H-1216............. 3/4....................... 1* C92H-1612............. 1....................... 3/4

C92H-1616............. 1.......................... 1C92H-1620............. 1.................... 1-1/4C92H-2016............. 1-1/4 ................... 1C92H-2020............. 1-1/4 ............. 1-1/4C92H-2024............. 1-1/4 ............. 1-1/2C92H-2420............. 1-1/2 ............. 1-1/4C92H-2424............. 1-1/2 ............. 1-1/2C92H-3224............. 2.................... 1-1/2C92H-3232............. 2.......................... 290 Duro ‘O’ Ring supplied

Short 90 deg. TubeJIC x JIC M/F

SAE 100R2 Working Pressure

P/Number ...................................ThreadC93-0707 .............................7/16 x 7/16C93-0808 .................................1/2 x 1/2C93-0909 .............................9/16 x 9/16C93-1212 .................................3/4 x 3/4C93-1414 .................................7/8 x 7/8C93-1717 ...................... 1-1/16 x 1-1/16C93-2121 ...................... 1-5/16 x 1-5/16C93-2626 .......................... 1-5/8 x 1-5/8C93-3030 .......................... 1-7/8 x 1-7/8C93-4040 .......................... 2-1/2 x 2-1/2

Short 90 deg. TubeM/F JIC x JICSAE 100R12

Working Pressure

P/Number ...................................ThreadC93H-1212 ..............................3/4 x 3/4C93H-1717 ................... 1-1/16 x 1-1/16C93H-2121 ................... 1-5/16 x 1-5/16C93H-2626 ....................... 1-5/8 x 1-5/8C93H-3030 ....................... 1-7/8 x 1-7/8

Long 90 deg. TubeM/F JIC x JIC


P/Number ...................................ThreadC94-0707 .............................7/16 x 7/16C94-0808 .................................1/2 x 1/2C94-0909 .............................9/16 x 9/16C94-1212 .................................3/4 x 3/4C94-1414 .................................7/8 x 7/8C94-1717 ...................... 1-1/16 x 1-1/16C94-2121 ...................... 1-5/16 x 1-5/16C94-2626 .......................... 1-5/8 x 1-5/8C94-3030 .......................... 1-7/8 x 1-7/8

Section 4Adaptors



Long 90 deg. TubeM/F JIC x JICSAE 100R12

Working Pressure

P/Number ................................... ThreadC94H-1212.............................. 3/4 x 3/4C94H-1717................... 1-1/16 x 1-1/16C94H-2121................... 1-5/16 x 1-5/16C94H-2626....................... 1-5/8 x 1-5/8C94H-3030....................... 1-7/8 x 1-7/8

Short 45 deg. Tube M/F JIC x JIC


P/Number ................................... ThreadC95-0707............................. 7/16 x 7/16

* C95-0808................................. 1/2 x 1/2C95-0909............................. 9/16 x 9/16C95-1212................................. 3/4 x 3/4C95-1414................................. 7/8 x 7/8C95-1717...................... 1-1/16 x 1-1/16C95-2121...................... 1-5/16 x 1-5/16C95-2626.......................... 1-5/8 x 1-5/8

Straight FlangeheadJIC Male x SAE

(Code 61)SAE 100R2

Working Pressure

P/Number................Thread........ FlangeC96-1208 ................ 3/4 ....................1/2C96-1212 ................ 3/4 ....................3/4C96-1412 ................ 7/8 ....................3/4C96-1712 ................ 1-1/16...............3/4C96-1716 ................ 1-1/16.................. 1C96-1720 ................ 1-1/6..............1-1/4C96-2116 ................ 1-5/16.................. 1C96-2120 ................ 1-5/16............1-1/4C96-2124 ................ 1-5/16............1-1/2C96-2620 ................ 1-5/8..............1-1/4C96-2624 ................ 1-5/8..............1-1/2C96-2632 ................ 1-5/8.................... 2C96-3024 ................ 1-7/8..............1-1/2C96-3032 ................ 1-7/8.................... 2C96-4032 ................ 2-1/2.................... 290 Duro ‘O’ Ring supplied


(Code 62)SAE 100R12

Working Pressure

P/Number................Thread........ FlangeC96H-1712 ............. 1-1/16...............3/4C96H-1716 ............. 1-1/16.................. 1C96H-2116 ............. 1-5/16.................. 1C96H-2120 ............. 1-5/16............1-1/4C96H-2620 ............. 1-5/8..............1-1/4C96H-2624 ............. 1-5/8..............1-1/2C96H-3020 ............. 1-7/8..............1-1/4C96H-3024 ............. 1-7/8..............1-1/290 Duro ‘O’ Ring supplied

90 deg. FlangeheadJIC Male x SAE

(Code 61)SAE 100R2

Working Pressure

P/Number....................... Thread.FlangeC97-1208 ....................... 3/4.............1/2C97-1212 ....................... 3/4.............3/4C97-1412 ....................... 7/8.............3/4C97-1416 ....................... 7/8............... 1C97-1712 ....................... 1-1/16 .......3/4C97-1716 ....................... 1-1/16 ..........1C97-1720 ....................... 1-1/16 ... 1-1/4

* C97-1724 ....................... 1-1/16 ... 1-1/2C97-2116 ....................... 1-5/16 ..........1C97-2120 ....................... 1-5/16 ... 1-1/4C97-2124 ....................... 1-5/16 ... 1-1/2C97-2616 ....................... 1-5/8 ............1C97-2620 ....................... 1-5/8 ..... 1-1/4C97-2624 ....................... 1-5/8 ..... 1-1/2C97-2632 ....................... 1-5/8 ............2

* C97-3020 ....................... 1-7/8 ..... 1-1/4C97-3024 ....................... 1-7/8 ..... 1-1/2C97-4032 ....................... 2-1/2 ............2C97-4040SUCTION...... 2-1/2 ..... 2-1/290 Duro ‘O’ Ring supplied


(Code 62)SAE 100R12

Working Pressure

P/Number................Thread ........FlangeC97H-1712 .............1-1/16...............3/4C97H-1716 .............1-1/16..................1

* C97H-1720 .............1-1/16........... 1-1/4C97H-2112 .............1-5/16...............3/4C97H-2116 .............1-5/16..................1C97H-2120 .............1-5/16........... 1-1/4C97H-2620 .............1-5/8............. 1-1/4C97H-2624 .............1-5/8............. 1-1/2

* C97H-3020 .............1-7/8............. 1-1/4C97H-3024 .............1-7/8............. 1-1/2C97H-4024 .............2-1/2............. 1-1/290 Duro ‘O’ Ring supplied


Section 4Adaptors



(Code 61)SAE 100R2

Working Pressure

P/Number................Thread ........FlangeC98-1208 ................3/4 ....................1/2C98-1212 ................3/4 ....................3/4C98-1712 ................1-1/16...............3/4C98-1716 ................1-1/16..................1C98-2116 ................1-5/16..................1C98-2120 ................1-5/16........... 1-1/4C98-2124 ................1-5/16........... 1-1/2C98-2620 ................1-5/8............. 1-1/4C98-2624 ................ 1-5/8 ............ 1-1/2

* C98-3024 ................1-7/8............. 1-1/290 Duro ‘O’ Ring supplied


(Code 62)SAE 100R12

Working Pressure

P/Number................Thread ........FlangeC98H-1408 .............7/8 ....................1/2C98H-1712 .............1-1/16...............3/4C98H-2116 .............1-5/16..................1C98H-2620 .............1-5/8............. 1-1/4C98H-2624 .............1-5/8............. 1-1/290 Duro ‘O’ Ring supplied


(Code 62)6000 psi

Working Pressure

P/Number ............... Thread ........Flange12FLH6K-12MJ..... 1-1/16 .............. 3/416FLH6K-12MJ..... 1-1/16 ................. 116FLH6K-16MJ..... 1.......................... 116FLH6K-20MJ..... 1.......................... 120FLH6K-16MJ..... 1-1/4 ............. 1-1/420FLH6K-20MJ..... 1-1/4 ............. 1-1/424FLH6K-20MJ..... 1-1/2 ............. 1-1/224FLH6K-24MJ..... 1-1/2 ............. 1-1/290 Duro ‘O’ Ring NOT included

45-deg FlangeheadJIC Male x SAE

(Code 62)6000 psi

Working Pressure

P/Number ............... Thread ........Flange12FLH6K-12MJ45. 1-1/16 .............. 3/416FLH6K-16MJ45. 1-5/16 ................. 120FLH6K-20MJ45. 1-5/8 ............. 1-1/490 Duro ‘O’ Ring NOT included

90-deg FlangeheadJIC Male x SAE

(Code 62)6000 psi

Working Pressure

P/Number ............... Thread........ Flange12FLH6K-12MJ90 . 1-1/16 .............. 3/412FLH6K-16MJ90 . 1-1/16 .............. 3/416FLH6K-12MJ90 . 1-1/16 ................. 116FLH6K-16MJ90 . 1-5/16 ................. 116FLH6K-20MJ90 . 1-5/8 ................... 120FLH6K-16MJ90 . 1-5/16 ...........1-1/420FLH6K-20MJ90 . 1-5/8 .............1-1/424FLH6K-20MJ90 . 1-5/8 .............1-1/290 Duro ‘O’ Ring NOT included

Section 4Adaptors



SAE Split FlangeClamp Code 61

UNC & Metric Set ScrewsRefer Page 4.44

P/Number ................................... FlangeFSC-08 ............................................. 1/2FSC-12 ............................................. 3/4FSC-16 ................................................ 1FSC-20 ..........................................1-1/4FSC-24 ..........................................1-1/2FSC-32 ................................................ 2FSC-40 ..........................................2-1/2FSC-48 ................................................ 3

SAE Split FlangeClamp Code 62

UNC & Metric Set ScrewsRefer Page 4.44

P/Number ................................... FlangeFSCH-08........................................... 1/2FSCH-12........................................... 3/4FSCH-16.............................................. 1FSCH-20........................................1-1/4FSCH-24........................................1-1/2FSCH-32.............................................. 2

SAE Split FlangeCAT-style Clampc/w UNC Bolt Kit

P/Number ................................... Flange12CATFHS....................................... 3/416CATFHS.......................................... 120CATFHS....................................1-1/424CATFHS....................................1-1/232CATFHS.......................................... 2

Four Bolt FlangeBlank

Code 61 (3000 psi)UNC & Metric Set Screws

Refer Page 4.44

P/Number.................................... FlangeFL-08 ................................................1/2FL-12 ................................................3/4FL-16 ...................................................1FL-20 ............................................ 1-1/4FL-24 ............................................ 1-1/2FL-32 ...................................................2FL-40 ............................................ 2-1/2FL-48 ...................................................390 Duro ‘O’ Ring supplied

Four Bolt FlangeBlank


Refer Page 4.44

P/Number.................................... FlangeFLH-08 .............................................1/2FLH-12 .............................................3/4FLH-16 ................................................1FLH-20 ......................................... 1-1/4FLH-24 ......................................... 1-1/2FLH-32 ................................................290 Duro ‘O’ Ring supplied

Flange BlankFP = Code 61

FPH = Code 62

P/Number.................................... FlangeFP-08 ................................................1/2FP-12 ................................................3/4FP-16 ...................................................1FP-20 ............................................ 1-1/4FP-24 ............................................ 1-1/2FP-32 ...................................................2FPH-08..............................................1/2FPH-12..............................................3/4FPH-16.................................................1FPH-20.......................................... 1-1/4FPH-24...........................................1/1/2FPH-32.................................................290 Duro ‘O’ Ring supplied

Four Bolt FlangeBSPP


Refer Page 4.44

P/Number ....................... Thread/FlangeFB-08 ............................................... 1/2FB-12 ............................................... 3/4FB-16 ...................................................1FB-20 ............................................ 1-1/4FB-24 ............................................ 1-1/2FB-32 ...................................................2FB-40 ............................................ 2-1/2FB-48 ...................................................390 Duro ‘O’ Ring supplied

Four Bolt FlangeNPT


Refer Page 4.44)

P/Number ....................... Thread/FlangeFN-08 ............................................... 1/2FN-12 ............................................... 3/4FN-16 ...................................................1FN-20 ............................................ 1-1/4FN-24 ............................................ 1-1/2FN-32 ...................................................290 Duro ‘O’ Ring supplied

Four Bolt FlangeBSPP


Refer Page 4.44

P/Number ....................... Thread/FlangeFBH-12 ............................................ 3/4FBH-16 ................................................1FBH-20 ......................................... 1-1/4FBH-24 ......................................... 1-1/2FBH-32 ................................................290 Duro ‘O’ Ring supplied


Section 4Adaptors


‘O’ Ring to suitSAE ‘O’ Ring Boss Thread

P/Number ....................................... SizeR01-06.............................................. 3/8R01-07............................................ 7/16R01-08.............................................. 1/2R01-09............................................ 9/16R01-12.............................................. 3/4R01-14.............................................. 7/8R01-17.........................................1-1/16R01-19.........................................1-3/16R01-21.........................................1-5/16R01-26...........................................1-5/8R01-30...........................................1-7/8R01-40...........................................2-1/2

‘O’ Ring to SuitSAE Flange

P/Number ....................................... SizeR02-08.............................................. 1/2R02-12.............................................. 3/4R02-16................................................. 1R02-20...........................................1-1/4R02-24...........................................1-1/2R02-32................................................. 2R02-40...........................................2-1/2R02-48................................................. 3

‘O’ Ring to SuitBSPP Threads

P/Number ....................................... SizeR03-02.............................................. 1/8R03-04.............................................. 1/4R03-06.............................................. 3/8R03-08.............................................. 1/2R03-12.............................................. 3/4R03-16................................................. 1R03-20...........................................1-1/4R03-24...........................................1-1/2

Dowty SealBSPP Thread

DIN Std

P/Number........................................ SizeR04-02 .............................................. 1/8R04-04 .............................................. 1/4R04-06 .............................................. 3/8R04-08 .............................................. 1/2R04-12 .............................................. 3/4R04-16 ................................................. 1R04-20 ...........................................1-1/4

Dowty SealBSPP Thread

B.S. Std

P/Number........................................ SizeR04B-02 ........................................... 1/8R04B-04 ........................................... 1/4R04B-06 ........................................... 3/8R04B-08 ........................................... 1/2R04B-12 ........................................... 3/4R04B-16 .............................................. 1R04B-20 ........................................1-1/4R04B-24 ........................................1-1/2R04B-32 .............................................. 2R04B-40 ........................................2-1/2

Dowty SealMetric Thread

P/Number........................................SizeR04M-08.......................................... M8R04M-10........................................ M10R04M-12........................................ M12R04M-14........................................ M14R04M-16........................................ M16R04M-18........................................ M18R04M-20........................................ M20R04M-22........................................ M22R04M-24........................................ M24R04M-26........................................ M26R04M-27........................................ M27R04M-33........................................ M33R04M-42........................................ M42R04M-48........................................ M48

‘O’ Ring to SuitMale Swivel

P/Number........................................SizeR05-04 ..............................................1/4R05-06 ..............................................3/8R05-08 ..............................................1/2

‘O’ Ring to SuitORFS Fittings

P/Number........................................SizeR06-09 ............................................9/16R06-11 ..........................................11/16R06-13 ..........................................13/16R06-16 .................................................1R06-19 ........................................ 1-3/16R06-23 ........................................ 1-7/16R06-27 ...................................... 1-11/16R06-32 .................................................2

Section 4Adaptors



Retaining Ring ForBSPP ‘O’ Ring


’O’ Ring Encapsulatedto Suit BSPP Threads


Metric & BSPPSeal Rings

P/Number........................................ SizeDKR-1/4 ...........................................1/4DKR-3/8 ...........................................3/8DKR-1/2 ...........................................1/2DKR-3/4 ...........................................3/4DKR-1 ................................................. 1DKR-1-1/4.....................................1-1/4DKR-1-1/2.....................................1-1/2DKR-M12...................................... M12DKR-M14...................................... M14DKR-M16...................................... M16DKR-M18...................................... M18DKR-M22...................................... M22

Southcott O-ring Kit

UNO, ORFS, C61 & C62

P/Number...............................................SORKIT.................................................

Southcott O-ring Kit

BSPP O-ring & retainer

P/Number...............................................SORKIT-P ............ BSPP O-ring & Ret.

SouthcottBonded Seal Kit

Metric Seal

P/Number...............................................SORKIT-DM .........................................

SouthcottBonded Seal Kit

BSPP Seal

P/Number...............................................SORKIT-DP ..........................................


Section 4Adaptors


BOLT KITUNC

includes four cap screwsfour spring washers

one 90 Duro ‘O’ RingSuits split or solid type

P/Number................................... ThreadBKU-5/16CAP................... 5/16 x 18tpiBKU-3/8CAP....................... 3/8 x 16tpiBKU-7/16CAP................... 7/16 x 14tpiBKU-1/2CAP....................... 1/2 x 13tpiBKU-5/8CAP....................... 5/8 x 11tpiBKU-3/4CAP....................... 3/4 x 10tpiBKUH-3/8CAP.................... 3/8 x 16tpiBKUH-7/16CAP................ 7/16 x 14tpiBKUH-1/2CAP.................... 1/2 x 13tpi

BOLT KITUNC

includes four hex head boltsfour spring washers

one 90 Duro ‘O’ RingSuits split type only

P/Number................................... ThreadBKU-5/16HEX .................. 5/16 x 18tpiBKU-3/8HEX ...................... 3/8 x 16tpiBKU-7/16HEX .................. 7/16 x 14tpiBKU-1/2HEX ...................... 1/2 x 13tpiBKU-5/8HEX ...................... 5/8 x 11tpiBKU-3/4HEX ...................... 3/4 x 10tpiBKUH-3/8HEX ................... 3/8 x 16tpiBKUH-7/16HEX ............... 7/16 x 14tpiBKUH-1/2HEX ................... 1/2 x 13tpi

BOLT KITMETRIC

includes four cap screwsfour spring washers

one 90 Duro ‘O’ RingSuits split or solid type

P/Number ................................... ThreadBKM-08CAP ........................M8 x 1.25BKM-10CAP ........................M10 x 1.5BKM-12CAP ......................M12 x 1.75BKM-14CAP ...........................M14 x 2BKM-16CAP ...........................M16 x 2BKM-20CAP ........................M20 x 2.5BKMH-10CAP......................M10 x 1.5BKMH-12CAP....................M12 x 1.75BKMH-16CAP.........................M16 x 2

BOLT KITMETRIC

includes four hex head boltsfour spring washers

one 90 Duro ‘O’ RingSuits split type only

P/Number ................................... ThreadBKM-08HEX........................M8 x 1.25BKM-10HEX........................M10 x 1.5BKM-12HEX......................M12 x 1.75BKM-14HEX...........................M14 x 2BKM-16HEX...........................M16 x 2BKM-20HEX........................M20 x 2.5BKMH-10HEX .....................M10 x 1.5BKMH-12HEX ...................M12 x 1.75

Code 61

Dash Size

Inch-Size

A B M.W. P.psi

-08 1/2" 38.1 17.5 5000

-12 3/4" 47.6 22.3 5000

-16 1" 52.4 26.2 5000

-20 1-1/4" 58.7 30.2 4000

-24 1-1/2" 69.8 35.7 3000

-32 2" 77.8 42.9 3000

-40 2-1/2" 88.9 50.8 2500

-48 3" 106.4 61.9 2000

Code 62

Dash Size

Inch-Size

A B M.W. P.psi

-08 1/2" 40.5 18.2 6000

-12 3/4" 50.8 23.8 6000

-16 1" 57.1 27.8 6000

-20 1-1/4" 66.7 31.8 6000

-24 1-1/2" 79.4 36.5 6000

-32 2" 96.8 44.5 6000

FLANGE BOLT CENTRES

Section 4Adaptors



PLUG PLASTICJIC/SAE/ORFS

P/Number ........ .......................... ThreadPPJ-07 ............. .............................. 7/16PPJ-08 ............. ................................ 1/2PPJ-09 ............. .............................. 9/16PPJ-10 ............. ................................ 5/8PPJ-11 ............. ............................ 11/16PPJ-12 ............. ................................ 3/4PPJ-13 ............. ............................ 13/16PPJ-14 ............. ................................ 7/8PPJ-16 ............. ................................... 1PPJ-17 ............. ...........................1-1/16PPJ-19 ............. ...........................1-3/16PPJ-21 ............. ...........................1-5/16PPJ-23 ............. ...........................1-7/16PPJ-26 ............. .............................1-5/8PPJ-30 ............. .............................1-7/8PPJ-40 ............. .............................2-1/2

PLUG PLASTICBSP/NPT

P/Number ........ .......................... ThreadPPB-02 ............ ................................ 1/8PPB-04 ............ ................................ 1/4PPB-06 ............ ................................ 3/8PPB-08 ............ ................................ 1/2PPB-10 ............ ................................ 5/8PPB-12 ............ ................................ 3/4PPB-16 ............ ................................... 1PPB-20 ............ .............................1-1/4PPB-24 ............ .............................1-1/2PPB-32 ............ ................................... 2

PLUG PLASTICMETRIC

P/Number ..... ............................. ThreadPPM-12 ........ ........................M12 x 1.5PPM-14 ........ ........................M14 x 1.5PPM-16 ........ ........................M16 x 1.5PPM-20 ........ ........................M20 x 1.5PPM-22 ........ ........................M22 x 1.5PPM-24 ........ ........................M24 x 1.5PPM-26 ........ ........................M26 x 1.5PPM-30 ........ ...........................M30 x 2PPM-33 ........ ...........................M33 x 2PPM-36 ........ ...........................M36 x 2PPM-42 ........ ...........................M42 x 2PPM-52 ........ ...........................M52 x 2

CAP PLASTICJIC/SAE/ORFS

P/Number...... .............................ThreadCPJ-07 .......... .................................7/16CPJ-08 .......... ...................................1/2CPJ-09 .......... .................................9/16CPJ-10 .......... ...................................5/8CPJ-11 .......... ...............................11/16CPJ-12 .......... ...................................3/4CPJ-13 .......... ...............................13/16CPJ-14 .......... ...................................7/8CPJ-16 .......... ...................................... 1CPJ-17 .......... ..............................1-1/16CPJ-19 .......... ..............................1-3/16CPJ-21 .......... ..............................1-5/16CPJ-23 .......... ..............................1-7/16CPJ-26 .......... ................................1-5/8CPJ-30 .......... ................................1-7/8

CAP PLASTICBSP/NPT

P/Number....... ............................ThreadCPB-02 .......... ..................................1/8CPB-04 .......... ..................................1/4CPB-06 .......... ..................................3/8CPB-08 .......... ..................................1/2CPB-10 .......... ..................................5/8CPB-12 .......... ..................................3/4CPB-16 .......... ..................................... 1CPB-20 .......... ...............................1-1/4CPB-24 .......... ...............................1-1/2CPB-32 .......... ..................................... 2

CAP PLASTICMETRIC

P/Number....... ............................ThreadCPM-08 ......... ........................ M8 x 1.0CPM-10 ......... ...................... M10 x 1.0CPM-12 ......... ...................... M12 x 1.5CPM-14 ......... ...................... M14 x 1.5CPM-16 ......... ...................... M16 x 1.5CPM-20 ......... ...................... M20 x 1.5CPM-22 ......... ...................... M22 x 1.5CPM-24 ......... ...................... M24 x 1.5CPM-26 ......... ...................... M26 x 1.5CPM-30 ......... ......................... M30 x 2CPM-33 ......... ......................... M33 x 2CPM-36 ......... ......................... M36 x 2CPM-42 ......... ......................... M42 x 2CPM-52 ......... ......................... M52 x 2

CAP PLASTICFLANGE CODE 61

P/Number.......... ........................ ThreadCPF61-08.......... ...............................1/2CPF61-12.......... ...............................3/4CPF61-16.......... ..................................1CPF61-20.......... ........................... 1-1/4CPF61-24.......... ........................... 1-1/2CPF61-32.......... ..................................2

CAP PLASTICFLANGE CODE 62

P/Number......... ......................... ThreadCPF62-08......... ................................1/2CPF62-12......... ................................3/4CPF62-16......... ...................................1CPF62-20......... ............................ 1-1/4CPF62-24......... ............................ 1-1/2CPF62-32......... ...................................2


Section 4Adaptors


NFPA and ISO Approve use ofSeals in Flared Fittings

The most recent revision of the National Fluid Power Association’s(NFPA) standard relating to "Hydraulic Fluid Power systems -Methods For Preventing External Leakage" now recommends the useof compliant seals to address the universal weeping problem of JICflared fittings.

NFPA now joins the International Standards Organization (ISO) as thetwo leading standards organizations in the world both recommendingseals be fitted to JIC type flared joints to address both environmentaland OH&S issues.

Flaretite Seals have a proven history of positive leak-free performanceon the most difficult and challenging global applications, such as theM1 Abrams Tanks and the latest M-777 Howitzer, where severe shockloads and vibration saw JIC flared fitting joints fail on commissioning.

In addition to these and other US Army and Navy applications Flaretiteseals are fitted by manufacturers such as Wind Generator Drives andKanga Loaders in Australia on their ride-on mini loaders to eliminatecostly rework and customer compliant warranty issues.

Flaretite Seals are a metal stamping with multiple concentric rings.They are impregnated with a special Loctite coating and when insertedinto a flared fitting joint the concentric rings form multiple seals downthe face of the flare whilst the loctite coating fills minor fitting faceimperfections providing a positive leak free seal solution.

Flaretite Seals are available in 304 stainless for 37 degree JIC standardHydraulic system use and 316 stainless for marine applications. Theyare also available in 30 degree JIS, 45 degree (SAE J512 Automotive)and 45 degree (SAE J513) in copper for gas and refrigeration use.

Section 4Adaptors



Standard PackPart No.

JIC Thread Size Pack Qty.

BP-37FT04-304-SOR 7/16" 20

BP-37FT06-304-SOR 9/16" 20

BP-37FT08-304-SOR 3/4" 20

BP-37FT10-304-SOR 7/8" 20

BP-37FT12-304-SOR 1-1/16" 20

BP-37FT16-304-SOR 1-5/16" 20

BP-37FT20-304-SOR 1-5/8" 20

BP-37FT24-316-SGR 1-7/8" 10

BP-37FT32-316-SGR 2-1/2" 10

Seals the mating faces of any standard JIC/SAE/JIS flare joint

Bulk Pack JIC Thread Size Pack Qty.

QT-37FT04-304-SOR 7/16" 100

QT-37FT06-304-SOR 9/16" 100

QT-37FT08-304-SOR 3/4" 100

QT-37FT10-304-SOR 7/8" 100

QT-37FT12-304-SOR 1-1/16" 100

QT-37FT16-304-SOR 1-5/16" 50

QT-37FT20-304-SOR 1-5/8" 50

QT-37FT24-316-SGR 1-7/8" 25

QT-37FT32-316-SGR 2-1/2" 10

FLARETITE GRAB PACK7/16", 9/16", 3/4", 7/8",1 1/16", 1 5/16", 1 5/8"

5, 5, 5, 5,5, 5, 5

Flaretite seals are available in 316 marine grade stainless steel in all sizes on request

Individual SealPart No.

JIC Thread Size Pack Qty.

IP-37FT04-304-SOR 7/16" 1

IP-37FT06-304-SOR 9/16" 1

IP-37FT08-304-SOR 3/4" 1

IP-37FT10-304-SOR 7/8" 1

IP-37FT12-304-SOR 1-1/16" 1

IP-37FT16-304-SOR 1-5/16" 1

IP-37FT20-304-SOR 1-5/8" 1

IP-37FT24-316-SGR 1-7/8" 1

IP-37FT32-316-SGR 2-1/2" 1

FLARETITE SEALS


Section 4Adaptors


BanjoMetric c/w Back Bore

P/Number ............... Diam..........B/BoreBJ1-08 .................... 8.......................... 5BJ1-10 .................... 10........................ 6BJ1-12 .................... 12........................ 8BJ1-14 .................... 14...................... 10

BanjoBSPP c/w Back Bore

P/Number ............... Diam..........B/BoreBJ2-02 .................... 1/8.................... 1/8BJ2-04 .................... 1/4.................... 1/4BJ2-06 .................... 3/8.................... 3/8BJ2-08 .................... 1/2.................... 1/2

BanjoMetric to JIC-M

P/Number ............... Diam................JICBJ3-0807 ................ 8..................... 7/16BJ3-0809 ................ 8..................... 9/16BJ3-1007 ................ 10................... 7/16BJ3-1009 ................ 10................... 9/16BJ3-1209 ................ 12................... 9/16BJ3-1409 ................ 14................... 9/16

Banjo BoltMetric

P/Number................ Diam .............PitchBJB-08Mx1.0 ......... 8 ..................... 1.00BJB-08Mx1.25 ....... 8 ..................... 1.25BJB-10Mx1.0 ......... 10 ................... 1.00BJB-12Mx1.5 ......... 12 ................... 1.50BJB-14Mx1.5 ......... 14 ................... 1.50

Banjo BoltBSPP

P/Number................ ....................... SizeBJB-02B ................. .........................1/8BJB-04B ................. .........................1/4BJB-06B ................. .........................3/8BJB-08B ................. .........................1/2

Banjo Washer

P/Number................ Type............... SizeBJW-08M ............... Metric ................. 8BJW-10M ............... Metric ............... 10BJW-12M ............... Metric ............... 12BJW-14M ............... Metric ............... 14BJW-02B ................ BSPP................1/8BJW-04B ................ BSPP................1/4BJW-06B ................ BSPP................3/8BJW-08B ................ BSPP................1/2

*Available on Request - Minimum Order Quantities May Apply 5.1

Section 5Accessories

QUICK RELEASE COUPLINGS - FASTERNV.............................. Valve Type Coupling ......................................................................................................5.3NS .............................. Ball Type Couplings .......................................................................................................5.3PV .............................. Push-Pull .........................................................................................................................5.3VV.............................. Screw On Heavy Duty ....................................................................................................5.4PVVM........................ Screw On.........................................................................................................................5.4FFH & 2FFI ............... Flat-Faced Couplings ......................................................................................................5.53FFI............................ Flat-Faced Couplings ......................................................................................................5.54FFI............................ Mobile Connector With Drain ........................................................................................5.53FFV .......................... Flat-Faced Screw Together .............................................................................................5.63CFPV ....................... Valve Type Rigid Mount Coupling.................................................................................5.6ANV........................... A Series Standard Coupling ............................................................................................5.6NZ .............................. Interchange with PB3310 Coupling ................................................................................5.6DF .............................. Coupling Test Point.........................................................................................................5.7

QUICK RELEASE COUPLINGS - SUNDRIES - FASTERTM & TF.................... PVC Dust Plug & Caps to suit NV couplings.................................................................5.7TMV & TFV.............. Aluminium Dust Plugs & Caps to suit VV couplings.....................................................5.7TMP & TFP ............... Aluminium Dust Plugs & Caps to suit P couplings ........................................................5.7TM2FN & TF2FN ..... Dust Covers to suit FFN series........................................................................................5.8TM2FJ & TF2FJ ........ Dust Covers to suit FFI series .........................................................................................5.8SD .............................. Dual Bracket....................................................................................................................5.8SS-12M ...................... Support Nipple ................................................................................................................5.8TA .............................. Self-Closing Dust Cap.....................................................................................................5.8

QUICK RELEASE COUPLINGS - MULTIFASTER................................... Standard MultiFaster .......................................................................................................5.9................................... Front End Loader MultiFaster.........................................................................................5.9................................... New Holland MultiFaster................................................................................................5.9

QUICK RELEASE COUPLINGS - TEMA................................... Coupling..........................................................................................................................5.10................................... Dust Plug.........................................................................................................................5.10................................... Dust Cap..........................................................................................................................5.10

SWIVEL JOINTS - TEMA................................... Swivel Joint .....................................................................................................................5.10

PORTA-POWER HOSES................................... Replacement Hose Assemblies .......................................................................................5.11................................... Quick-Release Couplings................................................................................................5.11

PIPE CLAMPS - SINGLES STD & MED DUTYC2 - C7....................... Standard & Medium Duty Clamps..................................................................................5.12PD1 - PD7.................. Double Plate ....................................................................................................................5.13PM1 - PM7................. Multiple Plate ..................................................................................................................5.13BB, DF6 ..................... Track & Nut ....................................................................................................................5.13VA1 - VA7................. Stacking Bolt M & F .......................................................................................................5.13

PIPE CLAMPS - SINGLES HEAVY DUTY CP1 - CP4 .................. Heavyweight Clamp........................................................................................................5.14VA-CP ....................... Stacking Bolt M & F .......................................................................................................5.14

PIPE CLAMPS - DOUBLESCF1 - CF5 .................. Double Clamp .................................................................................................................5.15VA-CF ....................... Stacking Bolt M & F .......................................................................................................5.15

CROSS REFERENCE................................... Pipe Clamp Selection Chart ............................................................................................5.16

5.2 *Available on Request - Minimum Order Quantities May Apply


SWIVEL JOINTSS SERIES ................... In Line Swivel Joints...................................................................................................... 5.179S SERIES ................. 90 Swivel Joints ............................................................................................................. 5.18S-SERIES................... Swivel Joint Seal Kits .................................................................................................... 5.19

ROTARY COUPLINGS - MTCGGIL SERIES............ In Line Rotary Couplings ............................................................................................... 5.20GG90 SERIES ........... 90° Rotary Couplings ..................................................................................................... 5.20

PRESSURE GAUGES.................................... Pressure Gauge - Quadrigauge ....................................................................................... 5.20.................................... Pressure Gauge - Glycerine-Filled Dual Scale............................................................... 5.21.................................... Pressure Gauge - Digital ................................................................................................ 5.21.................................... Pressure Gauge Isolator.................................................................................................. 5.21.................................... Pressure Gauge Adaptors ............................................................................................... 5.21

TEST POINTS.................................... Test Point Couplings ...................................................................................................... 5.22.................................... Test Point to Gauge Adaptor .......................................................................................... 5.22.................................... Test Point Hose Assemblies ........................................................................................... 5.22.................................... Test Point Tees ............................................................................................................... 5.23

TUBE.................................... Hydraulic Tube............................................................................................................... 5.24

COMPRESSION FITTTINGS.................................... Versa Flare Compression Fittings .................................................................................. 5.25

HOSE CLAMPS.................................... Low Pressure and Suction Hose..................................................................................... 5.26.................................... Worm Drive Clamps ...................................................................................................... 5.27.................................... Powergrip Shrinkband Clamps....................................................................................... 5.28

SWAGING MACHINES.................................... Child ............................................................................................................................... 5.29

CUT-OFF SAWS.................................... DC & AC........................................................................................................................ 5.29



NV SERIES

Valve Type: Interchangeable to ISO 7241-1 ‘A’ Standards in 1/2”

Dust Plugs and Caps see page 5.7

NS SERIES

Ball Type: Interchangeable to ISO 7241-1 ‘A’ Standards in 1/2”


PV SERIES

Valve Type: Push/Pull Couplings. Interchangeable to ISO 7241-1 ‘A’ Standards.

THRDBSPP

MWPBAR

MALE HALFFEMALE

HALFCOMPLETE

1/4 350 NV-14GAS-M NV-14GAS-F NV-14GAS




1 230 NV-1GAS-M NV-1GAS-F NV-1GAS

1 1/4 220 NV-114GAS-M NV-114GAS-F NV-114GAS

1 1/2 180 NV-112GAS-M NV-112GAS-F NV-112GAS

2 130 NV-2GAS-M NV-2GAS-F NV-2GAS

THRDNPT

MWPBAR

MALE HALFFEMALE

HALFCOMPLETE

1/4 250 NS-14NPT-M NS-14NPT-F NS-14NPT




1 220 NS-1NPT-M NS-1NPT-F NS-1NPT

THRDBSPP

MWPBAR

MALE HALFFEMALE

HALFCOMPLETE

*1/2 200 NS-12GAS-M NS-12GAS-F NS-12GAS

THRDBSPP

WPBAR

MALE HALFFEMALE

HALFCOMPLETE

1/2 260 NV-12GAS-M PV-12GAS-F PV-12GAS



VV SERIES

Valve Type: Screw on couplings. Heavy Duty Series


PVVM SERIESPorta-Power Couplers

Valve Type: Screw on couplings. Heavy Duty Series.


THRDBSPP

MWPBAR

MALE HALFFEMALE

HALFCOMPLETE

3/8 300 VV-38GAS-M VV-38GAS-F VV-38GAS



1 230 VV-1GAS-M VV-1GAS-F VV-1GAS

ThreadNPT

MWPBAR

MALE HALFFEMALE

HALFCOMPLETE

1/4" 1050 PVVM-14NPT-M PVVM-1/14NPT-F PVVM-14NPT

3/8" 1000 PVVM-38NPT-M PVVM-1/38NPT-F PVVM-38NPT



FFH & 2FFI SERIESFlat Face: Connectability: without pressure


3FFI SERIES

Flat Face:Connectability: male under pressure, female free to drain


4FFI SERIESFlat Face:Connectability: both male and female couplings under pressure

THREADMWPBAR

MALE HALF FEMALE HALF

1/4"BSPP 350 FFH04-14GAS-M FFH04-14GAS-F







1"BSPP 350 FFH12-1GAS-M FFH12-1GAS-F

1"BSPP 250 FFI-1GAS-M 2FFI-1GAS-F

3/4"UN-O 350 FFH06-12SAE-M FFH06-12SAE-F

7/8"UN-O 350 FFH08-58SAE-M FFH08-58SAE-F

1-1/16"UN-O 350 FFH08-34SAE-M FFH08-34SAE-F



THREADMWPBAR


3/8"BSPP 250 3FFI-38GAS-M FFH06-38GAS-F



1"BSPP 250 3FFI-1GAS-M 2FFI-1GAS-F

THREADMWPBAR


7/8"JIC-M 275 4BD4FI12-13/58S

1-1/16"JIC-M 275 4BD4FI12-13/34S

Spare Part Kits for the above

Male & Female Spares 4FI-12-M 4FI-12-F

Centre Drain Line KIT4BD-FFN38M



3FFV SERIES

Flat Face: Screw-on type. Connectability: male & female under pressureThis coupling is resistant to pressure peaks (hammer circuits)

3CFPV SERIES G Case N New HollandH John Deere Q Sisu (Valmet)M Massey Ferguson

Agricultural SeriesPush/Pull Couplings, rigid mount. ISO7241-A

ANV SERIES

Coupling: A Series StandardInterchangeable to ISO 7241-1:

NZ SERIES

Coupling: Interchange with PB3310 (PBR 1"truck)

THRDBSPP

MWPBAR


1/2 300 3FFV-12GAS-M 3FFV-12GAS-F

3/4 300 3FFV-34GAS-M 3FFV-34GAS-F

1 400 3FFV-1GAS-M 3FFV-1GAS-F

1¼ 400 3FFV-114GAS-M 3FFV-114GAS-F

1½ 400 3FFV-112GAS-M 3FFV-112GAS-F

THRDMWPBAR

MALE HALF OEM FEMALE HALF

7/8 UNF 250 NV or 2NV G 3CFPV-1/78UNF-F

M22X1.5 250 NV or 2NV G H M N 3CFPV-1/2215-F

7/8 UNF 250 NV or 2NV Q 3CFPV-14/78UNF-F

THREADMWPBAR


1/4" NPT-F 350 ANV-14NPT-M ANV-14NPT-F

3/8" BSPP-F 300 ANV-38GAS-M ANV-38GAS-F

3/4" BSPP-F 250 ANV-34GAS-M ANV-34GAS-F

1" BSPP-F 230 ANV-1GAS-M ANV-1GAS-F

THREADMWPBAR


1" BSPT-F 230 PBR-16MT PBR-16FB

Dust Cap & Plug PBR-16DC PBR-16DP



DF SERIES

Coupling Test Point:

TM & TF PVC DUST PLUGS & CAPSTo suit NV, NS Series

To suit NV and NS seriesStandard colour BLUE, also available in ORANGE, YELLOW, BLACK, RED, GREEN

TMV & TFV ALUMINIUM DUST PLUGS & CAPSTo suit VV Series

TMP & TFP DUST PLUGS & CAPSTo suit P Series

THREADMWPBAR


1/8 NPTF (Female) 480 DF04-18NPT-M DF04-18NPT-F

1/4 NPTF (Female) 480 DF04-14NPT-M DF04-14NPT-F

1/4 NPTF (Male) 480 DF04-1/14NPT-M DF04-1/14NPT-F

7/16 UN’O’ (Male) 480 DF04-1/14SAE-M DF04-1/14SAE-F



Size Plug Cap1/4 TM-14 TF-14

3/8 TM-38 TF-38

1/2 TM-12 TF-12

3/4 TM-34 TF-34

1 TM-1 TF-1

Size Plug Cap1/4 TMV-14S TFV-14S

3/8 TMV-38S TFV-38S

1/2 TMV-12S TFV-12S

3/4 TMV-34S TFV-34S

1 TMV-1S TFV-1S

Size Plug Cap1/4 TMP-14 TFP-14

3/8 TMP-38 TFP-38



TM2FN & TF2FN ALUMINIUM DUST COVERSTo suit FFN Series

TM2FJ & TF2FJ ALUMINIUM DUST COVERSTo suit FFI Series

SD DUAL BRACKET 1/2” COUPLING

SS SUPPORT NIPPLE

TA SELF CLOSING DUST CAPFOR PUSH/PULL COUPLINGS

Size Suit Female Suit Male3/8 TM2FN38S TF2FN38S

1/2 TM2FN12S TF2FN12S

3/4 TM2FN34S TF2FN34S

1 TM2FN1S TF2FN1S

Size Plug Cap1/4 TM2FJ14S TF2FJ14S

1/2 TM2FJ12S TF2FJ12S

3/4 TM2FJ34S TF2FJ34S

Part No.

SD-12

Part No.

SS-12M

Part No.

TA-12



MULTIFASTERQuick-Release Multiconnection System

Standard MultiFaster

Front End Loader MultiFaster

New Holland MultiFaster Special

All MultiFaster connectors can include electrical connections and/or air connections. Theapplications and options are limited only by our imaginations.

BaseSize

ThreadBSPP

Qty OfLines

Elec. Conn.

Fixed Half Mobile Half

06 1/2 2 N 2P206-2-12G-FC 2P206-2-12G-MC

08 1/2 2 N 2P208-2-12G-FC 2P208-2-12G-MC

06 1/2 4 N 2P506-4-12G-FC 2P506-4-12G-MC

08 1/2 4 N 2P508-4-12G-FC 2P508-4-12G-MC

06 1/2 6 N 2P606-6-12G-FC 2P606-6-12G-MC

08 1/2 6 N 2P608-6-12G-FC 2P608-6-12G-MC

BaseSize

ThreadBSPP

Qty OfLines

Elec. Conn.


06 3/8 4 N 2PS06-4-38G-FC 2PS06-4-38G-MC

06 1/2 4 N 2PS06-4-12G-FC 2PS06-4-12G-MC

08 1/2 4 Y 2PS08-1-4-12G-FC 2PS08-1-4-12G-MC

BaseSize

ThreadBSPP

Qty OfLines

Elec. Conn.


06 ¼ / 5/8 5 N 2P5065-5-A-FC 3P5065-5-A-MC

TECHNICAL DATABase Size

Rated Flow L/min

Max. PressureBar

Fluid Spillagecc Max.

06 38 250 0.008

08 52 250 0.01

12 125 250 0.02



TEMA SERIESQuick Release Couplings

TEMA SWIVEL JOINTS

The Tema Swivel Joint has very low torque even at max. working pressure, due to a balanced spindle seal.The Tema Swivel Joint has been shocked tested under pressure from 0-250 bar

PortBSPP

M WPbar

MaleHalf

FemaleHalf

CompleteCoupler

1/4" 450 2520. 2510. 2500

3/8" 350 3820. 3810. 3800

1/2" 300 5020. 5010. 5000

3/4" 280 7520. 7510. 7500

1" 250 10020. 10010. 10000

Dust Plug SizeDustCap

Size

2516 1/4" 2526 1/4"

3816 3/8" 3826 3/8"

5016 1/2" 5026 1/2"

7516 3/4" 7526 3/4"

10016 1" 10026 1"

Part No.Port GBSPP

Port G1BSPP

L ODHEX

1HEX

2A

MWPbar

Weight kg

250. 1/4" 3/8" 53 23 22 18 12 250 .105

500. 1/2" 3/4" 71 34 32 25 16 250 .250

750. 3/4" 1" 80 43 40 32 20 250 .460

1000. 1" 1 1/4" 86 53 50 38 22 250 .700



Quick Release screw-on couplings. Heavy Duty Series.Made for high pressure applications, they are specially intended for high pressure hydraulic tools where static pressure can reach high values. Interchangeable with the most popular units existing on the market. They can be coupled/uncoupled with the system under pressure. Maximum working pressure 1000bar (14500psi)

PVV Series

Part No. DESCRIPTION

PVVM-38NPT-M Male half coupler 3/8” NPTFPVVM-1/38NPT-F Female half coupler, 3/8” NPTFTFP-38 Dust Cap (Hose Half)TMP-38 Dust Plug (Ram Half)

REPLACEMENTHYDRAULIC HOSE ASSEMBLIESTO SUIT PORTA-POWER UNITS

HOSE ASSEMBLIES690 BAR (10000 PSI) WORKING PRESSURE2:1 SAFETY FACTOR

Part No.

PPH-500PPH-1000PPH-1500PPH-2000PPH-2500PPH-3000PPH-3500PPH-4000PPH-4500PPH-5000PPH-5500PPH-6000PPH-6500PPH-7000PPH-7500PPH-10000PPH-12000PPH-13000PPH-14000PPH-15000

Part No. indicates length in (mm).NB: Quick Release Coupling half not included withhose assembly.

Also available 1/4” NPT at same prices

HOSE HALF RAM HALF

Porta-Power



GROUP

SIZE - OD Jaws Only

Part No.

Std. Duty Complete

Part o.

Med. DutyCompletePart No.mm Inches

Water Pipe

C2

6 1/4"

1/8”GAS1/4"GAS C2S-** C2-** C2-**-M

8 5/16"10 3/8"12

12.7 1/2"

C3

14

1/4"GAS3/8”GAS

C3S-** C3-** C3-**-M1516 5/8"18

C4

19 3/4"

1/2”GAS C4S-** C4-** C4-**-M2022 7/8"2325 1"

C528

3/4”GAS C5S-** C5-** C5-**-M3032 1-1/4"

C6

351”GAS

C6S-** C6-** C6-**-M38 1-1/2"4042 1-1/4"GAS45

C744.5 1 3/4"

C7S-** C7-** C7-**-M48.3 1 1/2"GAS50.8 2"

POLYPROPYLENE CLAMPS

Standard DutyTwo Cap Screws & WasherType C2 - C7

Medium DutyTop Plate and Hex BoltsType C2 - C7

NB: To complete the model code, replace ** with the Size, i.e. 5/8” = 5/8



DOUBLE PLATE MULTIPLE PLATE

Part No

Suit Clamp Type

No. Clamp

Part No

Suit Clamp Type

No. Clamp

PD1 C1 2 PM1 C1 10PD2 C2 2 PM2 C2 10PD3 C3 2 PM3 C3 10PD4 C4 2 PM4 C4 10PD5 C5 2 PM5 C5 5PD6 C6 2 PM6 C6 5PD7 C7 2 PM7 C7 5

C2 - 1/8 - GAS - M - PL

Type

Size

GAS = GAS PIPE

(Omit if not applicable)

EXT. Base Plate

(Omit if not required)

Series

S = Standard Duty

M = Medium Duty

ORDERING CODE

Options:- Twin Base Plates, Multiple Base Plates

CLAMP COMPONENTS

SIZE -> C2 C3 C4 C5 C6 C7

DESCRIPTION Part NoPart No

Part No

Part No Part NoPart No

Top Plate PS2 PS3 PS4 PS5 PS6 PS7Base Plate P2 P3 P4 P5 P6 P7

Ext Base Plate PL2 PL3 PL4 PL5 PL6 PL7Cap Screw S-C1/C2 S-C3 S-C4 S-C5 S-C6 S-C7

Washer W W W W W WHex Bolt VE1/2 VE3 VE4 VE5 VE6 VE7

Stacking Bolt VA1/2 VA3 VA4 VA5 VA6 VA7

TRACK MOUNT

Part No Description

BB TrackDF6 NUTDF8 NUT

PD Double Plate PM Multiple Plate



CP3 - 1 1/2 - CS

Type

Size

GAS = GAS PIPE


ORDERING CODE

Group Size - OD Heavy DutyJaws OnlyPart No.

Heavy Duty Complete

Modelmm Inches Pipe

CP1

1/4

CP1S-**-CS CP1-**-CS3/8 1/8"GAS1/2 1/4"GAS5/8 3/8"GAS3/4

CP2

20 3/4

CP2S-**-CS CP2-**-CS22 7/8 1/2"GAS25 1 3/4"GAS2830

CP3

30

1 1/41 1/2

CP3S-**-CS CP3-**-CS32 1"GAS42 1-1/4"GAS45

CP4

42

2” CP4S-**-CS CP4-**-CS

45 1"GAS53 1-1/4"GAS54 1-1/2"GAS63 2"GAS65

SIZE -> CP1 CP2 CP3 CP4

Description Part No Part No Part No Part No

Top Plate TP-CP1-CS TP-CP2-CS TP-CP3-CS TP-CP4-CS

Base Plate BP-CP1-CS BP-CP2-CS BP-CP3-CS BP-CP4-CS

Hex Bolt S-CP1-CS S-CP2-CS S-CP3-CS S-CP4-CS

Stacking Bolt VA-CP1 VA-CP2 VA-CP3 VA-CP4

NB: TO COMPLETE THE model Code Replace ** with the Size, i.e. 7/8” = 7/8

Component Pricing

HEAVYWEIGHT SERIES: in polypropylene or self-extinguishing polyamide for pipes from 6 to 324 mm. for metric sizes, from 1/8” to 12" for gas inch sizes, from 1/4” to 8" for English inch sizes. It's recommended for complicated systems, for high pressure and con-siderable oil speed. The upper plates are also supplied in this series. High hexagon head bolts VACP are used in the stacked mounting.



CF3 - 1/2 - 1/2 - GAS

Type

Size

GAS = GAS PIPE


ORDERING CODE

GROUP

SIZE - ODTWIN CLAMP JAWS ONLY

Part No.

TWIN CLAMP

COMPLETEPart No.

MM Inches Pipe

CF1

6-61/4” - 1/4”3/8” - 3/8”1/2” - 1/2”

CF1S-**-** CF1-**-**8-8

10-1012-12

CF2

14-14

1/2 - 1/25/8 - 5/8

CF2S-**-** CF2-**-**15-15 1/4-1/4GAS16-16 3/8-3/8GAS18-18

CF320-20

3/4” - 3/4”1” - 1”

CF3S-**-** CF3-**-**22-22 1/2-1/2GAS25-25

CF426-26

CF4S-**-** CF4-**-**28-28 3/4-3/4GAS30-30

CF5

33-33

1 1/4” - 1 1/4”1 1/2” - 1 1/2”

CF5S-**-** CF5-**-**35-35 1-1GAS38-38 1-1/4-1-1/4GAS42-42

SIZE -> CF1 CF2 CF3 CF4 CF5

DESCRIPTION Part No Part No Part No Part No Part No

TOP PLATE TP-CF1 TP-CF2 TP-CF3 TP-CF4 TP-CF5

BASE PLATE BP-CF1 BP-CF2 BP-CF3 BP-CF4 BP-CF5

HEX BOLT S-CF1 S-CF2 S-CF3 S-CF4 S-CF5

STACKING BOLT VA-CF1 VA-CF2 VA-CF3 VA-CF4 VA-CF5

NB:To Complete The Model Code Replace **-** With the Size,ie 3/8”-3/8”=3/8-3/8

Component Pricing



HOSE IDG1

1 WIRE NON SKIVEG2

2 WIRE NON SKIVEG4K & G3K

MULTI-SPIRALGMV

SUCTION HOSE

1/4” C3-1/4GAS (14mm) C3-15 (15mm) - -3/8” C3-3/8GAS (17mm) C3-18 (18mm) C4-20 (20mm) -1/2” C4-20 (20mm) C4-22 (22mm) C4-23 (23mm) -5/8” C4-23 (23mm) C4-25 (25mm) C5-28 (28mm) -3/4” C5-28 (28mm) C5-30 (30mm) C5-30 (30mm) C5-32 (32mm)

1” C6-35 (35mm) C6-38 (38mm) C6-38 (38mm) C6-38 (38mm)1 1/4” C6-42 (42mm) C7-48.3 (48.3mm) C7-48.3 (48.3mm) C6-45 (45mm)1 1/2” C7-50.8 (50.8mm) C7-54 (54mm) C7-54 (54mm) C7-50.8 (50.8mm)

2” CP4-65-CS (65mm) CP4-65-CS (65mm) CP4-65-CS (65mm) CP4-2-1/2-CS

PIPE CLAMP SELECTION CHARTTO SUIT HYDRAULIC HOSE

Clamp is nearest possible to hose OD



S Series/Inline 3000 psi/full flow High pressure hydraulic swivel joints

MALE JIC TO MALE NPT

MALE JIC TO FEMALE JIC

FEMALE NPT TO MALE NPT

FEMALE NPT TO FEMALE NPT

Part No.Barrel

Thread JICStem

Thread NPTS6J6-P4 9/16-18 1/4"

S8J10-P8 7/8-14 1/2"

S8J12-P12 1 1/16-12 3/4"

S16J16-P16 1 5/16-12 1"

S20J20-P20 1 5/8-12 1 1/4"

Part No.Barrel

Thread JICStem

Thread JICS6J6-JF6 9/16-18 9/16-18

S6J8-JF8 3/4-16 3/4-16

S8J10-JF10 7/8-14 7/8-14

S8J12-JF12 1 1/16-12 1 1/16-12

S16J16-JF16 1 5/16-12 1 5/16-12

*S20J20-JF20 1 5/8-12 1 5/8-12

*S24J24-JF24 1 7/8-12 1 7/8-12

Part No.BarrelThread

NPT

StemThread NPT

S6PF4-P4 1/4" 1/4"

S6PF6-P6 3/8" 3/8"

S8PF8-P8 1/2" 1/2"

S8PF8-P12 1/2" 3/4"

S8PF12-P12 3/4" 3/4"

S16PF16-P16 1" 1"


NPT

StemThread NPT

S6PF4-PF4 1/4" 1/4"

S6PF6-PF6 3/8" 3/8"

S8PF8-PF8 1/2" 1/2"

S8PF12-PF12 3/4" 3/4"

S16PF16-PF16 1" 1"



9S Series/90° 3000 psi/Pressure balanced High pressure hydraulic swivel joints

MALE JIC TO MALE JIC

MALE JIC TO MALE NPT

MALE JIC TO FEMALE NPT

MALE JIC TO MALE O’RING

Part No.Barrel

Thread JICStem

Thread JIC9S6J6-J6 9/16-18 9/16-18

9S6J8-J8 3/4-16 3/4-16

9S8J10-J10 7/8-14 7/8-14

9S12J12-J12 1 1/16-12 1 1/16-12

9S16J16-J16 1 5/16-12 1 5/16-12

9S20J20-J20 1 5/8-12 1 5/8-12

Part No.Barrel

Thread JICStem

Thread NPT9S6J6-P6 9/16-18 3/8"

9S6J8-P6 3/4-16 3/8"

9S6J8-P8 3/4-16 1/2"

9S8J10-P8 7/8-14 1/2"

9S12J12-P12 1 1/16-12 3/4"

9S16J16-P16 1 5/16-12 1"

9S20J20-P20 1 5/8-12 1 1/4"

Part No.Barrel

Thread JICStem

Thread NPT9S6J6-PF6 9/16-18 3/8"

9S6J8-PF6 3/4-16 3/8"

9S6J8-PF8 3/4-16 1/2"

9S8J10-PF8 7/8-14 1/2"

9S12J12-PF12 1 1/16-12 3/4"

9S16J16-PF16 1 5/16-12 1"

Part No.Barrel

Thread JICStem

Thread UNO9S6J6-O6 9/16-18 9/16-18

9S6J6-O8 9/16-18 3/4-16

9S6J8-O8 3/4-16 3/4-16

9S8J10-O10 7/8-14 7/8-14

9S12J12-O12 1 1/16-12 1 1/16-12

9S16J16-O16 1 5/16-12 1 5/16-12

9S20J20-O20 1 5/8-12 1 5/8-12



9S Series/90° 3000 psi/Pressure balanced High pressure hydraulic swivel jointsFEMALE NPT TO MALE NPT

SEAL KITSS-Series

Seals as listed contain Dust and Fluid Seals with Retaining Rings, Balls and Plugs as applicable.

9S-Series


NPT

StemThread NPT

9S6PU4-P4 1/4" 1/4"

9S6PU6-P6 3/8" 3/8"

9S8PU8-P8 1/2" 1/2"

9S12PU12-P12 3/4" 3/4"

9S16PU16-P16 1" 1"

9S20PU20-P20 1 1/4" 1 1/4"

Body SizeKit No.

S6S6-1

S8S8-1

S16S16-1

S20S20-1

S24S24-1

Body SizeKit No.

9S69S6-1

9S89S8-1

9S129S12-1

9S169S16-1

9S209S20-1



Part No.Barrel

BSPP-FStem

BSPP-MSpeedRPM

M.W.P.bar

Max. Flowl/min

GGIL01 1/4" 1/4" 500 400 25

GGIL02 3/8" 3/8" 400 400 45

GGIL03 1/2" 1/2" 370 360 80

GGIL04 3/4" 3/4" 280 310 120

GGIL05 1" 1" 230 280 150

GGIL06 1-1/4" 1-1/4" 200 250 200

GGIL07 1-1/2" 1-1/2" 170 210 250

GGIL09 2" 2" 140 180 300

Part No.Barrel

BSPP-FStem

BSPP-MSpeedRPM

M.W.P.bar

Max. Flowl/min

GG9001 1/4" 1/4" 500 400 25

GG9002 3/8" 3/8" 400 400 45

GG9003 1/2" 1/2" 370 360 80

GG9004 3/4" 3/4" 280 310 120

GG9005 1" 1" 230 280 150

GG9006 1-1/4" 1-1/4" 200 250 200

GG9007 1-1/2" 1-1/2" 170 210 250

GG9009 2" 2" 140 180 300

MTC Rotary CouplingsRotary couplings are used to connect two hydraulic lines that are moving simultaniously in different directions. Rotations can either be alternating or continuous.These couplings rotate on roller bearings and provide a perfect seal via special low friction seals. They can rotate under maximum pressure with low torque.

NB: When required - order separately a dowty seal to suit the BSPP threads (eg R04B-08). Ref page 4.42 of this catalogue

90° Coupling

Part No.GAUGE TYPE

HOSE LENGTH(inches)

LOW PRESSURE GAUGE*

RANGE(psig)

MEDIUM PRESSURE GAUGE

RANGE(psig)

HIGH PRESSURE GAUGE

RANGE(psig)Net Price

03-740-019 Std. 36 0-150 0-600 0-5000

PRESSURE TESTING DEVICES FOR HYDRAULIC, AIR AND VACUUM SYSTEMS* Includes bleeder screw and convenient hanger* Built-in pressure sensor protects low range gauges from high pressure* Compatible with most hydraulic fluids* Continuous system pressure readings are possible through pressure ranges 0-5000 PSI.

Inline Coupling



Gauge AdaptorsPart No. THREAD THREAD

CP20-0407G 1/4"BSPP-F 7/16"JIC-MCP20-0409G 1/4"BSPP-F 9/16"JIC-MCP20-0809G 1/2"BSPP-F 9/16"JIC-MCP28-0409G 1/4"BSPP-F 9/16"JIC-FCS25-0707 7/16"JIC-F 7/16"JIC-F

Part No.PORTBSPP

MAX. PRESSURE

BARTYPE

EMIL01A 1/4” 250 A 180°EM9001A 1/4” 250 A 90°HB1-PA 1/4" 400 Push To Read

Panel Mount - Rear Entry - Dual Scale

63mm Diameter - Connection = 1/4” BSPP

Part No. Diam BAR PSI

PG63PM-010 63 10 150

PG63PM-060 63 60 850

PG63PM-100 63 100 1450

PG63PM-160 63 160 2300

PG63PM-250 63 250 3600

PG63PM-400 63 400 5800


PG100PM-010 100 10 150

PG100PM-060 100 60 850

PG100PM-100 100 100 1450

PG100PM-160 100 160 2300

PG100PM-250 100 250 3600

PG100PM-400 100 400 5800

Line Mount - Bottom Entry - Dual Scale

63mm Diameter - Connection = 1/4"BSPP

Part No. Diam BAR PSI

PG63BE-010 63 10 150

PG63BE-060 63 60 850

PG63BE-100 63 100 1450

PG63BE-160 63 160 2300

PG63BE-250 63 250 3600

PG63BE-400 63 400 5800

PG63BE-600 63 600 8700

PG63BE-BOOT PROTECTIVE BOOT


PG100BE-010 100 10 150

PG100BE-060 100 60 850

PG100BE-100 100 100 1450

PG100BE-160 100 160 2300

PG100BE-250 100 250 3600

PG100BE-400 100 400 5800

PG100BE-600 100 600 8700

PG100BE-BOOT PROTECTIVE BOOT

Line Mount - Bottom Entry - Digital - 1/4"BSPP

PG80BE-700 80 700 10150

PG80BE-BOOT PPROTECTIVE BOOT

Pressure Gauge Isolators

EM9001A

BOTTOM ENTRY

EMIL01A

GLYCERINE FILLEDDUAL SCALE

HB1-PA

Gauge Protective Boot

Digital

Part No. DiameterPG63BE-BOOT 63MMPG100BE-BOOT 100mmPG80BE-BOOT 80mm

Digital

Panel Mount(Inc’s Panel Mt Kit)



Part No. Style THREADA

THREADB

M.W.P. (BAR)

620.08.204.00.1 1 1/4" BSPP-F M16 X 2 (M-B/HD) 630

620.08.208.00.1 1 1/2" BSPP-F M16 X 2 (M-B/HD) 630

620.09.204.00.1 2 1/4" BSPP-F M16 X 2 (F) 630

620.09.208.00.1 2 1/2" BSPP-F M16 X 2 (F) 630

TEST POINT COUPLNG ‘A’ TYPE M16X2 SERIES

Part No. MALETHREAD

M W PBAR

620.01.202.23 1/8” BSPP 400

620.01.204.23 1/4” BSPP 630

620.01.206.23 3/8"BSPP 630

620.01.202.33 1/8” BSPT 400

620.01.204.33 1/4” BSPT 630

620.01.206.33 3/8"BSPT 630

620.01.302.33 1/8” NPT 400

620.01.304.33 1/4” NPT 630

620.01.404.03 7/16” UNO 630

620.01.406.03 9/16” UNO 630

620.01.010.23 M10x1 400

620.01.012.23 M12x1.5 630

620.01.014.23 M14x1.5 630

620.01.016.23 M16x1.5 630

Part No. FEMALETHREAD

M W PBAR

620.07.204.83 1/4"BSPP-F 630

620.05.404.03 7/16”JIC-F 345

620.05.406.03 9/16”JIC-F 345

620.05.408.03 3/4"JIC-F 345

HOSE ASSEMBLIES 630BAR MWP

Part No.(includes length in mm)

64-10.162-50.204-20064-10.162-50.204-30064-10.162-50.204-40064-10.162-50.204-50064-10.162-50.204-60064-10.162-50.204-800

64-10.162-50.204-100064-10.162-50.204-150064-10.162-50.204-200064-10.162-50.204-250064-10.162-50.204-3000

TEST POINTS - M16X2 (Test 20) SERIES

NB: The listed hose assemblies have the 10.162 cou-pling at one end, and the 50.204 coupling at the other.For other options delete the listed codes from the model number and add the code for the desired thread type.Use an add & subtract to the list price for pricing.

TEST POINT TO GAUGE ADAPTORS

A

TEST POINT HOSES 2mm ID

64 - 10.162 - 50.204 - 200

A B C L

B

Style 2Style 1

HOSE & COUPLING OPTIONS

Part No. THREAD

6400 DN2 Hose 2mm ID 800.00.002.00 Ferrule801.10.162.00 M16X2 (Test 20) 801.60.204.00 1/4"BSPP-F (60° Seat)801.50.204.00 1/4” BSPP-F(gauge)801.54.204.00 1/4"BSPP-F-90°(gauge)801.50.208.00 1/2” BSPP-F801.60.404.00 7/16” JIC-F801.60.406.00 9/16” JIC-F

MWP = 630 bar

NB: Use the highlighted part of the coupling Part No. in the hose assembly Part No.



TEST POINT TEES

DF04-1/14SAE-M 620.01.404.03 C77-07

Southcott test point tees provide a convenient method oftaking pressure readings from any point in a hydraulic system.Compact in size, they can be fitted as a temporary orpermanent installation at a cost-effective price.

USA Test Point

European Test Point

Test 20

JIC

Part No.Male

ThreadFemaleThread

Test Point Thread

C27G-070707 7/16" JIC-M 7/16" JIC-F 7/16" UNO-FC27G-090907 9/16" JIC-M 9/16" JIC-F 7/16" UNO-FC27G-121207 3/4" JIC-M 3/4" JIC-F 7/16" UNO-FC27G-141407 7/8" JIC-M 7/8" JIC-F 7/16" UNO-FC27G-171707 1-1/16" JIC-M 1-1/16" JIC-F 7/16" UNO-FC27G-212107 1-5/16" JIC-M 1-5/16" JIC-F 7/16" UNO-FC27G-262607 1-5/8" JIC-M 1-5/8" JIC-F 7/16" UNO-F

BSPP

Part No.Male

ThreadFemaleThread

Test Point Thread

CP24G-040407 1/4" BSPP-M 1/4" BSPP-F 7/16" UNO-FCP24G-060607 3/8" BSPP-M 3/8" BSPP-F 7/16" UNO-FCP24G-080807 1/2" BSPP-M 1/2" BSPP-F 7/16" UNO-FCP24G-121207 3/4" BSPP-M 3/4" BSPP-F 7/16" UNO-FCP24G-161607 1" BSPP-M 1" BSPP-F 7/16" UNO-FCP24G-202007 1-1/4" BSPP-M 1-1/4" BSPP-F 7/16" UNO-F

ORFS

Part No.Male

ThreadFemaleThread

Test Point Thread

F27G-111107 11/16" UNF-M 11/16" UNF-F 7/16" UNO-F

F27G-131307 13/16" UNF-M 13/16" UNF-F 7/16" UNO-FF27G-161607 1" UNF-M 1" UNF-F 7/16" UNO-FF27G-191907 1-3/16" UNF-M 1-3/16" UNF-F 7/16" UNO-FF27G-232307 1-7/16" UNF-M 1-7/16" UNF-F 7/16" UNO-FF27G-272707 1-11/16" UNF-M 1-11/16" UNF-F 7/16" UNO-F

TEST POINT HOSES 4mm ID

67 - 10.162 - 60.204 - 200

A B C L

Port Plug

HOSE & COUPLING OPTIONS

Part No. THREAD

6700 DN4 Hose 4mm ID800.00.004.00 Ferrule804.10.162.00 M16X2 (Test 20) 804.60.204.00 1/4” BSPP-F (60° Seat)804.50.204.00 1/4” BSPP-F(gauge)804.80.302.00 1/8"NPT-Male804.60.404.00 7/16” JIC-F804.60.406.00 9/16” JIC-F

MWP = 500 bar

NB: Use the highlighted part of the coupling Part No. in the hose assembly Part No.



HYDRAULIC TUBE

SIZE

WORKING PRESSURE

WITH 3:1 SAFTY FACTOR

WallDim.

WEIGHT PER

Length

UNPLATEDPer 6.1M Length

GOLD ZINC PLATEDPer 6.1M Length

OD(Inches) x GAUGE

BAR PSI mm Kg Part No Part No

1/4” x 20g x 6.0m 311 4512 0.91 0.73 T0420 T0420P

3/8” x 16g x 6.0m 369 5348 1.63 1.94 T0616 T0616P

3/8” X 18g x 6.0m 277 4011 1.22 1.53 T0618 T0618P

1/2” x 16g x 6.0m 277 4011 1.63 2.75 T0816 T0816P

1/2" x 18g x 6.0m 207 3008 1.22 2.10 T0818 T0818P

5/8” x 14g x 6.0m 277 4011 2.03 4.23 T1014 T1014P

5/8” x 16g x 6.0m 221 3209 1.63 3.48 T1016 T1016P

3/4" x 12g x 6.0m 299 4342 2.64 6.51 T1212 T1212P

3/4” x 14g x 6.0m 230 3342 2.03 5.19 T1214 T1214P

3/4” x 16g x 6.0m 184 2674 1.63 4.27 T1216 T1216P

1” x 10g x 6.0m 277 4011 3.25 10.83 T1610 T1610P

1” x 12g x 6.0m 236 3415 2.77 9.04 T1612 T1612P

1” x 14g x 6.0m 173 2507 2.03 7.14 T1614 T1614P

1” x 16g x 6.0m 138 2005 1.63 5.83 T1616 T1616P

1.1/4” x 10g x 6.0m 221 3209 3.25 13.93 T2010 T2010P

1.1/2” x 10g x 6.0m 184 2674 3.25 17.02 T2410 T2410P

2” x 7g x 6.0m 190 2757 4.47 31.17 T3207 N/A

NB: Pricing per 6.0m length.

Cold Drawn Seamless Tube - Annealed ASTM A1796.0m LengthsSupplied in Full Lengths Only.Other Sizes and Gauges are Available on Request

NB: The above working pressure rating is based on “BARLOWS” Formula P = 2ST/D Where P = Burst Pressure (PSI) S = UTS (47000) T = Wall Thickness (inches) D = O.D. of tube (inches)



FLARELESSTUBE COMPRESSION FITTINGS

INITIAL ASSEMBLY

1. Cut the tube squarely and deburr the end internally and externally. Clean all dirt and grit from I.D. and O.D.

2. Slide the nut and then the sleeve on to the tube. Make sure the tapered end of the sleeve points toward the nut.

3. Lubricate all mating surfaces of nut, sleeve and body with heavy lubricant.

4. Place end of tube against standard J.I.C. 37 Degree flare body.

5. Slide the sleeve and nut against body and tighten the nut onto the body “hand Tight”. Mark the nut in relation to the body for loca-tion.

6. Hold tube against body and tighten nut total of 1-1/4 turns for sizes 1/4" to 5/8" and 1-1/2 turns for sizes 3/4" to 1-1/4"

REASSEMBLY

1. Slide nut against the body and tighten to “Hand Tight”. Mark the nut for location.

2. Tighten nut a minimum of one “Hex” flat. The Versa flare Flareless Tube fitting is designed for 10 reassemblies.

Assembly Instructions

TUBE O.D. JIC THREAD NUT SLEEVE

1/4” 7/16” VN-04 VS-04

3/8” 9/16” VN-06 VS-06

1/2” 3/4” VN-08 VS-08

5/8” 7/8” VN-10 VS-10

3/4” 1 1/16” VN-12 VS-12

1” 1 5/16” VN-16 VS-16

1 1/4” 1 5/8” VN-20 VS-20



Part No.Adjustment

Range

Suits HoseType

SP17-19

SP19-21

SP21-23

SP23-25

SP25-27

SP27-29

SP29-31 PROS19

SP31-34 12GMV

SP34-37 16GMV PROS25

SP37-40

SP40-43 PROS32

SP43-47 20GMV

SP47-51 24GMV PROS38

SP51-55

SP55-59

SP59-63 PROS51

SP63-68 32GMV

SP68-73

SP73-79 40GMV

SP79-85

SP85-91 48GMV

SP91-97

SP97-104 56GMV

SP104-112

SP112-121

SP121-130

SP130-140

SP140-150

SP150-162

SP162-174

T-BoltClamps

Stainless Steel Band & Zinc Plated Bolt & Trunnion

Supra W2 Clamps

Mikalor

Part No. SIZESuits Hose

Type3223 23-25

3226 26-28

3229 29-31 PROS19

3230 30-33 12GMV

3232 32-35 PROS25

3236 36-39 16GMV

3240 40-43 PROS32

3244 44-47 20GMV

3248 48-51 24GMV PROS38

3250 50-53

3252 52-55

3256 56-59

3260 60-63 PROS51

3262 62-65 32GMV

3264 64-67

3268 68-73

3274 74-79 40GMV

3280 80-85

3286 86-91 48GMV

3292 92-97

3298 98-103 56GMV

Stainless Steel Band & Zinc Plated Bolt & TrunnionSizes up to 304mm available on request



Micro-Gear Small Diameter ClampsBand and housing in 201/301 stainless steel. Band width 5/32"1¼" hex head plated carbon steel screw.NB: Sold in Box quantities of 10 Clamps

Automotive General PurposeBand and housing in 201/301 stainless steel. Band width 1/2"5/16" hex head plated carbon steel screwNB: Sold in Box quantities of 10 Clamps

Pipe Retaining Clamp(P Clamp)Commonly used for retaining pipes,hoses, cables, tubing etc. The rubber liner absorbs vibration and also protects the product.NB: Sold in Box quantities of 5 Clamps

Part No.

Clamping Range

Imperial (in.)Metric (mm)

Min Max Min Max6204 1/4 5/8 6 16

6206 5/16 7/8 8 22

Part No.

Clamping Range

Imperial (in.) Metric (mm)

Min Max Min Max5706 3/8 7/8 10 22

5708 5/16 7/8 8 22

5710 1/2 1 1/16 13 27

5712 1/2 1 1/4 13 32

5716 11/16 1 1/2 18 38

5720 3/4 1 3/4 19 44

5724 1 2 25 51

5728 1 1/4 2 1/4 32 57

5732 1 1/2 2 1/2 38 63

5736 1 3/4 2 3/4 44 70

5740 2 3 51 76

5744 2 1/4 3 1/4 57 82

5748 2 1/2 3 1/2 64 89

5752 2 3/4 3 3/4 70 95

5756 3 4 76 101

5760 3 1/4 4 1/4 83 108

5764 2 1/2 4 1/2 64 114

5772 3 5 76 127

5780 3 1/2 5 1/2 89 140

5788 4 6 102 152

5796 4 1/2 6 1/2 114 165

Part No.Diam (mm)

Band Width (mm)

Mounting Hole(mm)

800415 4 15 6

800615 6 15 6

800915 9 15 6

801015 10 15 6

801215 12 15 6

801315 13 15 6

801515 15 15 6

801615 16 15 6

801815 18 15 6

801915 19 15 6

802015 20 15 6

802215 22 15 6

802515 25 15 6

802715 27 15 6

802915 29 15 6

803215 32 15 6

803515 35 15 6

803815 38 15 6

804015 40 15 6

804515 45 15 6

804815 48 15 6

805115 51 15 6

805515 55 15 6

805715 57 15 6

806015 60 15 6

806415 64 15 6

806615 66 15 6

807015 70 15 6

800816 8 16 10

800916 9 16 10

801016 10 16 10

801316 13 16 10

801516 15 16 10

801616 16 16 10

801816 18 16 10

801916 19 16 10

802016 20 16 10

802216 22 16 10

802516 25 16 10

802716 27 16 10

802916 29 16 10

803216 32 16 10

803516 35 16 10

803816 38 16 10

805116 51 16 10

CLAMPS



Part No. Clamp Range (mm)

SB15 12.7 - 17.5SB19 17.5 - 20.6SB22 20.6 - 23.8SB25 23.8 - 27.0SB29 27.0 - 30.2SB34 30.2 - 38.1SB41 38.1 - 44.5SB48 44.5 - 50.8SB54 50.8 - 57.1SB60 57.1 - 63.5SB67 63.5 - 69.9SB73 69.9 - 76.2SB79 76.2 - 82.6SB86 82.6 - 88.9SB90 88.9 - 92.1

POWERGRIP™ SHRINKBAND CLAMPSIdeal for use with TexSleeve hose protection

*An industrial heatgun is required



SWAGING MACHINES & CUT-OFF SAWS

CS125 CS132Up to 1" 2-wire Up to 1¼" 4-wire

CS150 CS250Up to 2" 4-wire Up to 2" 6-wire

12V or 24V DC 240V or 415V ACCut-off Saws

For the full range of Child Swaging Machines and Accessories please contact your nearestChild Distributor

5.30

Warranty

The Company warrants that the products sold by it shall be free from defects in either material or manufacture and will,provided written request to do so is made within 30 days after delivery, either repair or replace, at its option, items shown tothe Company’s satisfaction to have been defective at the time of delivery.

This warranty comprises the sole and entire warranty pertaining to the Company’s products and other terms, conditions orwarranties, including but not limited to merchantability and fitness for any particular purpose, whether expressed or implied,are hereby excluded to the fullest extent permitted by law.

No warranty is given on components made to other than the Company’s design and is void on any product evidencing alterationfrom the Company’s manufacturing specification.

The Company liability under any statutory provision is limited to the repair, replacement or provision of any equivalentproduct, at its option.

Except to the extent liability cannot by law be excluded or limited, the Company does not under any circumstances whatsoeveraccept liability for any contingent cost or consequential losses or any other liability whatsoever (except that under the aboveterms) which may in any way arise in the use of its products or any defect occurring in them.

Technical information has been prepared from actual test results and is considered reliable but no responsibility can bepresumed for its accuracy under varied field conditions.

Child hose couplings are designed and manufactured to suit the nominated Gates or Child branded hose and are to be assembledstrictly in accordance with instructions issued by the Company.

The use of non-specified hose or assembly other than to Company instructions may produce an unsatisfactory and hazardousproduct. Warranty is void in such instances and any liability, expressed or implied, is totally disclaimed.

The Company does not warrant the performance of weld-type adaptors, once welded (except by the Company, its servants orits selling agents). These welded products should be tested and proved fit for the use intended. Not testing, not proving, faultyfabrication or faulty welding may result in an unsatisfactory or even dangerous product.

Suggestions on application, installation and care of the product are offered by the Company only as a guide to best practice anddo not add to or otherwise vary the terms of the warranty.

The Company’s technical reference manuals provide dimensional and technical specifications to assist in the correct selectionand application of Child and Gates products. Because of technological progress and product improvement, all design anddimensional data shown in this product guide is subject to change without notice.

MELBOURNEUnit 5, 4 Federation Way

Chifley Industry ParkMoorabbin Airport

MENTONE, VIC 3194Telephone (03) 8551 0500

Fax (03) 8551 0508Email: [email protected]

BRISBANE45 Fulcrum Street

RICHLANDS QLD 4077Telephone (07) 3375 4499


PERTH1/1110 Abernethy Rd & DundasHIGH WYCOMBE WA 6057Telephone (08) 9454 9311


SYDNEY1/1A Gibbon Road

BAULKHAM HILLS NSW 2153Telephone (02) 9838 9033


ADELAIDERegistered Head Office

243 Halifax StreetADELAIDE SA. 5000

Telephone (08) 8228 2411Fax (08) 8223 3413

Email: [email protected]

EMERALD77 Macauley Access Road

EMERALD QLD 4720Telephone (07) 4988 1800


CHILD MANUFACTURINGWINGHAM NSW

TAREE NSW

NEWCASTLE4/14 Yangan Drive

BERESFIELD NSW 2322Telephone (02) 4964 2123


ADELAIDESouthcott Manufacturing

Athol ParkADELAIDE SA

LAVERTON1/9 Everaise Court

LAVERTON NTH, VIC 3026Telephone (03) 9371 9000


DEVONPORTLot 4, 6183 Frankford RoadWESLEY VALE, TAS 7307Telephone (03) 6427 0908


ABN 27 007 870 662

Office Locations

MACKAY10/30-36 Margaret Vella Drive

PAGET QLD 4740Telephone (07) 4952 4056


september 2013 copyright (c) 2004-2013 - southcott … · adelaide (08) 8228 2411 (08) 8223 3413...

Documents