ROTARY VALVE POSITIONER BRACKET

MOUNTING INSTRUCTIONS

Rotary Valve Positioner Bracket Parts.

1- Attach the clamps to the threaded orifices existent on the actuator. Do not tight them completely.

The bolts are not supplied with the mounting bracket and they must be in accordance with size and thread of the actuator holes.

2- Attach the magnet bracket to the Actuator extremity (NAMUR).

The end the valve shaft must comply with Namur Standard.

2 Mounting Instructions

3 – Fasten the hex screw.

4 – Attach the magnet to the NAMUR adapter. Do not fasten the bolts completely, allowing the magnet rotation.

5 – Mounting the positioner bracket through the threaded rods.

BFY – MOUNTING BRACKET FOR POSITIONER FY 3

6 – Use the centralizer gadget to get the bracket centralized with the magnet.

7 – Adjust the positioner bracket using the centralizer gadget and the nuts to get the height.

8 – Place the nut and washers.

Do not fasten the nuts completely.

4 Mounting Instructions

9 – Tighten the clamp bolts to fasten them to the actuator.

10 – Fasten the positioner bracket bolts to the clamps fastening.

11 – Remove the centralizer gadget and fasten the positioner to the positioner bracket.

BFY – MOUNTING BRACKET FOR POSITIONER FY 5

12 – Put the pressure equivalent to the half of the stem and adjust the magnet position to have the arrows matching.

13 – Tighten the bolts to fasten the magnet to the magnet bracket.

6 Mounting Instructions