sensonode high-strain sensor - for life...™ high-strain sensors provide the ability to monitor...
TRANSCRIPT
Contact Information:Parker Hannifin Corporation1320 Orleans DriveSunnyvale, CA 94089
parker.com/conditionmonitoring
SensoNODE™ High-Strain Sensors provide the ability to monitor industrial equipment and processes for excessive strain, displacement or vibration. Parker’s High-Strain Sensors are soft, thin, conformable devices that can take accurate measurements and readings while being strained up to 100% for millions of cycles. Because sensors are made of a tough silicone rubber, they can withstand the harshest environments from heat, cold, and shock to dust, vibration and moisture. The SensoNODE High-Strain Sensor consists of one to two sensor strips mounted on the machine or asset being monitored, and either a SensoNODE Blue or SensoNODE Gold Strain Sensor Transmitter node, which enables continuous or diagnostic monitoring via Parker’s SCOUT™ condition monitoring and predictive maintenance software.
SensoNODE™
High-Strain Sensor
Applications:
Why SensoNODE High-Strain Sensor?
Parker’s High-Strain Sensors can be used to measure strain, displacement or vibration in machines, vehicles, production lines, plants, and facilities. They are ideal for monitoring elastomer and other high-strain devices that are subject to overload or fatigue failure, such as air and fluid handling. Other applications can include: •Elastomerjointsandseals •Conveyersystems •Linearactuators •Hydraulicaccumulators •Mechanicaleffectors •Pneumaticcylinders
•Ultra-highstrain(upto100%)•Highaccuracy,highprecision•Conformable•Rapidresponse•Soft,thin,flexible,unobtrusive•Smartdigitalinterface•Pre-calibratedoutput•Temperaturecompensatedoutput
BUL3864-ParkerHigh-StrainSensor06/16©2016ParkerHannifinCorporation
Parameter Required ValuesActive Area Dimensions SNES-50R14-C3-02:50mmx14mm:SNES-100R14-C3-02:100mmx14mm
MaximumExtension 100%stretchoftheactivearea(e.g.50mmforSNES-50RT14)
Accuracy ±0.25%strain(±125um)
Sensitivity 0.026%strain(e.g.13μmforSNES-50RT14)
Linearity ±1% Full Scale
Hysteresis ±1% Full Scale
Stretching Force Profile <1N @ 10% Strain; <9N @ 100% Strain
CyclicLife >1MillionCycles
MeasurementOutputs Percent strain in 100ths of a percent of the length of the active area, Temperature in degrees Kelvin
SamplingRate 1-10hzforstandardconfiguration(designedforreportingviawireless),1–100hz+byrequest
Wired Electrical Interface Serial(UART&SPI);3.3VDC
Operating Environment -40Cto+85C,0to100%RH,IP67ratedforindustrialapplications
WirelessRadio 900MhzforSensoNODEGoldStrainSensorTransmitter
2.4GhzBLEforSensoNODEBlueRadioTransmitter
Specifications:
Current State of Joints Trend Chart - Predict Failure of Joints
Continuous Condition Monitoring & DiagnosticsThe High-Strain Sensor integrates with Parker’s SCOUT software. This allows users to connect their SensoNODE High-Strain sensors to their mobile devices to receive diagnosticinformation.SCOUTMobileandCloudsoftwarecompiles the data and presents it in a way that makes sense to the user’s operation, allowing them to track data in real-time and also review historic trends.
93.5
17.0
14.0
50.0
5.4
0.7
Industrial High Strain Sensor93.5
17.0
14.0
50.0
5.4
0.7
Industrial High Strain Sensor