13

The user interface and control capabilities of Sensilight PRO include the following features:

User interface description

ON/OFF button The button activates and deactivates your device with a single press. If the device is left unattended for 5 minutes, it will automatically turn off. When turning on the device, all energy levels lights will light up for a split second, and then the device will turn on at energy level 1.

Energy recommendation button A press on the button will allow you to detect the recommended energy level for your treatment, according to your skin tone in the tested area. When pressing the energy recommendation button, all energy selection buttons will flicker for 10 seconds. As it does so, hold the device on the desired treatment area and release a pulse. The recommended energy level (according to your skin tone at the treatment area) will be automatically set, as indicated by the energy selection buttons.

If during this time the pulse was not released (either

1.

2.

because trigger button was not pressed, or because the device was applied on a skin tone that is not allowed to be treated, or because no contact with the body was detected), the energy level will remain unchanged.Note that the recommended energy level is set only when pressing the energy recommendation button. It does not occur automatically when the skin tone or treatment area are changed. To test the skin tone in each treatment area, place the device on that area and press the energy recommendation button.

Energy selection buttons The + (increase energy level) and – (decrease energy level) buttons, allows you to choose between 6 different levels. Select the energy level according that you found most comfortable in the preliminary test. You can use the energy recommendation button to assist you in choosing the optimal energy level for you, for each desired treatment area.

3.

a. Each press of the + or - buttons (after the device turns on) will increase or decrease the energy by a