selling a zeiss opmi stereo zoom microscope, used for ... · yes, you, and nobody else, not your...
TRANSCRIPT
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 1
selling a Zeiss OPMI stereo zoom microscope, used for engraving and scrimshaw. Comes with Zeiss fiber optic cable and light source. You will need a small 110 volt transformer. Everything is in great condition and working very well. Use this opportunity to buy something nicer than a Meiji for much less, Lindsay recommends the Zeiss. I am wanting R16000 which is probably what you paid for your grinder! You will be up and running. Contact me on [email protected] or 0117042177
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 2
Andre en Tercia Lottering 071 480 6056 / 082 495 0663
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 3
4kw 2900rpm 3 fase motor Contact Nico Bosman
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 4
FOR SALE
Water cooled Grinding Machine for Edge Tools, with leather stropping wheel.
In excellent condition and plenty of use left on the stone. This will be of great interest to knife makers and serious hand tool users for
sharpening. Only serious buyers please.
Asking R6,000-00 onco
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 5
Contact Howard via whatsapp / sms for further information, on 083 258 5045
SIMPLATIC KIT, 300X25 SMOOTH CONTACT WHEEL, DRIVE WHEEL 200X50 & 1.10 KW 3PH 1480RP VERT/BAUER MOTOR. THERE ARE NO VSD.
THE UNIT ARE 1 YEAR OLD AND HAVE ONLY MADE 15 KNIVES. R9000.00
Contact:
WIEHAN STEENKAMP
CELL: 082 55 22 376
HARRISMITH
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 6
Ek het ‘n oorspronklike blaasbalk beskikbaar vir R4,000. Die oorblyfsels van die oorspronklike oond is ingelukkig beskadig, maar dit is beskikbaar saam met die blaasbalk. Die paar stukke gereedskap is ook ingesluit by die prys
Ferdi Steffens O83 462 6422
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 7
Hydraulic Press - 20 - 30 Ton Wanted
Please contact Eric Els on 060 9975070
or Lehandra Swart 082 856 1818
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 8
Mike Shiller 082 462 1931 Cost to me:- 1 ultimate grinder with inverter R12 250 2 with disc attachment R1450 3 small wheel attachments R2250 4 Buff machine stand R1500 5 mini wheel grinder XL R6600 6 disk grinder deluxe R4900 7 Buff on stand R2950 8 buff attachment R850 9 Vernier R500 10 drill press R3500 11 meat cutter R3000 12 compressor R3500 Also a lot of extras - lights X 3, belts, cleaning chemicals, sand paper of all quality, wood for handles, 2.5 meter of n690, knife tools etc. The cost to me was in excess of R43 000. I'm looking to sell all the equipment as a consolidated lot. I know i can't expect a full price. But it has not even made up 1 complete knife yet so it almost brand new.
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 9
Please refer to the procedures and conditions below!!!
SURFACE GRINDER The machine can work with the standard grinding wheels BUT has also been retrofitted to take belts. It’s a 3 phase machine that I have had running on a Leroy Somer DIGIDRIVE to get a nice range of different RPM’s.
Please Phone Gordon Barnard Email [email protected] Cell: 076 909 6523
Sharp “Knifo” Tips:
“Knice” Bargains by Johan Oosthuysen
from www.KMTs.co.za‘s complementary How-2... Series
Knifemaking machines, knifemaking tools, knifemaking supplies / materials and free advice is available from www.KMTs.co.za, contact us at 071 382 3127, 067 077 2318, 067 078 0420,[email protected] or visit our
web-site www.KMTs.co.za
If you make knives you are in a danger zone and need to take all precautions necessary to safeguard yourself and people around you. Yes, you, and nobody else, not your employee, not your visitor, not your friend, not your client, not your supplier, not your advisor, not your dog - only you! By accepting any information offered in this document, you acknowledge and accept this responsibility. Disclaimer: www.KMTs.co.za, it's management, employees or author, will not be held responsible for any damage or personal injury forthcoming from information contained in this document.
May 28, 2018 Page: 10
Procedures and Conditions
$ Looking for or wanting to sell knife making bargains? $ This small's addition consists of a FOR SALE and WANTED section, exclusive to
www.KMTs.co.za customers, who are invited to advertise their needs to other www.KMTs.co.za customers and internet visitors, advertising is for free.
$ www.KMTs.co.za reserve the right to accept, reject or alter advertisements in the interest of fair trade and to protect it’s own and it’s clients interests.
If you want to place a FOR SALE or WANTED advert $ e-Mail your advert, containing item information, description, photo if you wish, price, availability
and your information to [email protected] $ We will place the advert with the advertisers contact information. $ Interested buyers can contact the advertisers directly. $ Once the item is sold, the advertiser agrees to advise us of the sale, in order to have it
removed from the bargain corner. If you are interested in an offer in either the FOR SALE or WANTED section $ Contact the person placing the advert directly. $ When the item is no longer on offer, please advise us in order to have it removed.