selection guide natural convection ovens (gravity)€¦ · • microprocess pid control /...
TRANSCRIPT
Natural Convection Ovens
Vacuum Ovens
OvensSELECTION GUIDE Natural Convection Ovens (Gravity)
DescriptionOperating
Temp. Range(℃/℉)
ChamberVolume
(L /cu ft)
TemperatureFluctuationat 100℃ [±℃/℉]
TemperatureVariation
at 100℃ [±℃/℉]Page
General Models
ON -02G Amb. +15 to 250 / Amb. +27 to 482
52 / 1.8
0.3 / 0.54
5.9 / 10.62
83ON -12G 91 / 3.2 7.5 / 13.5
ON -22G 135 / 4.8 6.9 / 12.42
EconomyModels
ON -01E Amb. +15 to 220 / Amb. +27 to 428
52 / 1.8 0.3 / 0.54 6.5 / 11.7
84ON -11E 100 / 3.5 0.4 / 0.72 4.1 / 7.38
ON -21E 150 / 5.3 0.5 / 0.9 7.3 / 13.14
Vacuum Ovens
DescriptionOperating
Temp. Range(℃/℉)
ChamberVolume
(L /cu ft)
TemperatureFluctuationat 100℃[±℃/℉]
TemperatureVariation
at 100℃[±℃/℉]Page
VacuumOV -11 Amb. +5 to 250
/ Amb. +9 to 48228 / 1 0.1 / 0.18
3.7 / 6.66 86OV -12 65 / 2.3 0.3 / 0.54
Accessories & OptionsDescription Page
for Convection Ovens 85
for Vacuum Ovens 87
e-mail: [email protected] www.carlibiotec.it
Optimum Control FeaturesSafety Features Constructional Features
OvensGENERALAPPLICATIONS
TECHNICAL BENEFITS
General ApplicationsForced, Nature Convection Ovens & VacuumOF Models ON Models OV Models
General Aging and Curing •Agricultural Genetic • •Annealing • • •Asphalt Testing • •Conditioning • •Contamination-Free storage of semiconductors and other sensitiveelectronic components
•
Desiccating •Digestion of Proteins and Starches •Drying of Plant Tissue •Drug Metabolism • •Electronic Burn-in • •Epoxy and Plastic Curing • •Fine Chemical Precipitation •General Baking • •General Heating • •Glassware Drying • •Ideal for General Drying •Life and Exposure Studies • •Ordnance Material Testing • •Out-gassing Solids and Liquids •Paper Drying • •Plating •Precise Moisture Determination • •Preheating • •Rubber Drying • •Serum Protein Analysis • •Silicon Wafer Drying •Stability and QC/ Batch Testing • •Sterilization • •Suspended Solids Evaluation • •Textile Drying • •Vacuum Embedding •Volatile Resins and Polymers Testing •Vulcanization Studies • •
1) Self-protecting cut-off function and visual signals: - Over temperature safety function:
shuts the power that is being supplied to the heater and then the controller sequen-tially.
- 2 separate over-current fuses. (without large type)
2) Timer mode useful for delaying the start of a test or for stopping a test that has been running for a certain time:- Integrated time setting: Delay ON/OFF.
(from 1 min 99hr 59 min)
- Power interruption setting: After a power interruption select automatic run or manual run.
3) Door-open warning alarm (excludes OV Models):- Intermittent audible tone and visual LED
warning alarms. - After 5 minutes of the door being open
the heater and fan will automatically stop to protect the user.
1) Professional electronic and program control:- Microprocessor PID temperature control
with very simple calibration and auto-tuning feature.
- Conveniently preset 3 most commonly used temperature settings.
- Switch from Celsius to Fahrenheit. (℃ or ℉)
2) HMI (Human Machine Interface) control display network system:- Similar key arrangements to the temp.
& humid. chamber, bath, circulator, and shaker.
- User-friendly controls, splash proof / easy to clean keypad and clear LED display.
- Quick keypad lock key prevents accid-ental resetting of testing parameters.
1) High quality #304 grade stainless steel inner chamber and dirt repellent powder coated exterior surface. (except for OV Models)
2) Gasket minimizes heat loss and tightly seals the chamber door.
3) Fully insulated oven chamber prevents heat from escaping to the exterior surface.
4) Adjustable electropolished stainless steel shelving provides air flow around samples for unifor-med tempering and allow for easy cleaning.
Ovens
83
Natural Convection Ovens (General Models)
Specifications & Ordering Information
Model ON-02G ON-12G ON-22GChamber Volume (L / cu ft) 52 / 1.8 91 / 3.2 135 / 4.8
TemperatureRange (℃ / ℉) Amb. +15 to 250 / Amb. +27 to 482Fluctuation 1) at 100℃ (±℃ / ℉) 0.3 / 0.54Variation 1) at 100℃ (±℃ / ℉) 5.9 / 10.62 7.5 / 13.5 6.9 / 12.42
Dimension(W×D×H)
Interior (mm / inch)400×360×365/ 15.7×14.2×14.4
480×410×465/ 18.9×16.1×18.3
610×460×485/ 24×18×19
Exterior (mm / inch)577×542×760/ 22.7×21.3×30
657×592×870/ 25.9×23.3×34.3
785×642×897/ 30.9×25.3×35.3
Net Weight (Kg / lbs) 49 / 108 59 / 130 68 / 150Electrical Requirements (230V, 50 / 60 Hz) 4.3A 6 A 7.4ACat. No. AAH11135K AAH11145K AAH11155KElectrical Requirements (120V, 50 / 60 Hz) 6.7A 8.3A 10ACat. No. AAH11136U AAH11146U AAH11156U
1) Technical data according to DIN 12880.
Operating Features • From +15℃ above room temperature to 250℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature
settings without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads.
Constructional Features • Gravity-flow convection with vertical airflow for uniform
sample heating. • Threefold tempered glass viewing window allows for easy
monitoring of samples. (optional)
• Fully insulated dual-wall door opens 180 degrees & featuring a pull down door handle.
• Rounded inner chamber corners for easy cleaning and better air-flowing.
• Corrosion-resistant incoloy sheath heater and stainless steel interior.
• Two circular adjustable top slide vents helps to control inner air vapor circulation. (38mm / 1.5˝ in dia.)
Ideal for high temperature storage with user-friendly design.ON-G Models is used for all sterilization and drying tasks that do not require high drying rates or special time requirements, ideal for drying applications requiring a gentle airflow.
ON-22G with optional Viewing WindowIncluded Accessories Optional Accessories
see page 85
• 2 Wire Shelves• Tempered Viewing Windows• Perforated Shelves
OvensO
84
Natural Convection Ovens (Economy Models)
Full features performance for general purpose lab ovens.ON-E series is a economical warm storage up to 220℃.
Operating Features • From +15℃ above room temperature to 220℃. • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature
settings without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads.
Constructional Features • Gravity-flow convection generates a vertical airflow of heat
for a uniformed heating of samples. • Moderately sized, an easy to clean spacious chamber, and an
easy to grip circular door handle. • Corrosion-resistant incoloy sheath heater and stainless steel
chamber. • Two circular adjustable top slide vents helps to control inner
air vapor circulation. (38mm / 1.5˝ in dia.) • 2 Wire Shelves• Perforated Shelves
ON-11EIncluded Accessories Optional Accessories
see page 85
Specifications & Ordering Information
Model ON-01E ON-11E ON-21EChamber Volume (L / cu ft) 52 / 1.8 100 / 3.5 150 / 5.3
TemperatureRange (℃ / ℉) Amb. +15 to 220 / Amb. +27 to 428Fluctuation 1) at 100℃ (±℃ / ℉) 0.3 / 0.54 0.4 / 0.72 0.5 / 0.9Variation 1) at 100℃ (±℃ / ℉) 6.5 / 11.7 4.1 / 7.38 7.3 / 13.14
Dimension(W×D×H)
Interior (mm / inch)375×370×370 / 14.8×14.6×14.6
455×430×510 / 18×17×20
585×460×555 / 23×18.1×21.9
Exterior (mm / inch)530×535×737 / 20.9×21.1×29
610×595×877 / 24×23.4×34.5
740×625×922 / 29.1×24.6×36.3
Net Weight (Kg / lbs) 34 / 75 46 / 101.4 59 / 130Electrical Requirements (230V, 50 / 60 Hz) 4.3A 6 A 7.4ACat. No. AAH15015K AAH15025K AAH15035KElectrical Requirements (120V, 50 / 60 Hz) 6.7A 8.3A 10ACat. No. AAH15016U AAH15026U AAH15036U
1) Technical data according to DIN 12880.
Ovens
85
Accessories & Options
Wire Shelves Stainless steel and electropolished shelf system is removed easily without using tools
for easy cleaning.
ModelsDescription
Cat. No.Included Maximum W×L (mm / inch)
OF-02G 2 8 366×316 / 14.4×12.4EDA8136
OF-02G-4C 8 32 366×316 / 14.4×12.4OF-12G 2 12 446×366 / 17.6×14.4 EDA8135OF-22G 2 14 516×416 / 20.3×16.4 EDA8134OF / ON-01E 2 10 366×316 / 14.4×12.4 EDA8136OF / ON-11E 2 14 446×366 / 17.6×14.4 EDA8135OF / ON-21E 2 15 576×419 / 22.7×16.5 EDA8137OF-300G / H 2 17 708×608 / 27.9×23.9 RTD1196OF-450G / H 3 26 708×608 / 27.9×23.9 RTD1196OF-750G / H 3 35 708×808 / 27.9×31.8 RTD1197ON-02G 2 8 366×316 / 14.4×12.4 EDA8136ON-12G 2 12 446×366 / 17.6×14.4 EDA8135ON-22G 2 12 576×419 / 22.7×16.5 EDA8137
Perforated Shelves Stainless steel shelf system is removed easily without using tools for easy cleaning.
ModelsDescription
Cat. No.Included Maximum
OF-02G 8 366×316 / 14.4×12.4AAA12531
OF-02G-4C 32 366×316 / 14.4×12.4OF-12G 12 446×366 / 17.6×14.4 AAA12532OF-22G 14 516×416 / 20.3×16.4 AAA12533OF / ON-01E 10 365×310 / 14.4×12.4 AAA12531OF / ON-11E 14 445×360 / 17.6×14.4 AAA12532OF / ON-21E 15 575×410 / 22.7×16.5 AAA12535OF-300G / H 17 708×608 / 27.9×23.9 AAA80604-2OF-450G / H 26 708×608 / 27.9×23.9 AAA80604-2OF-750G / H 35 708×808 / 27.9×31.8 AAA80604-3ON-02G 8 366×316 / 14.4×12.4 AAA12531ON-12G 12 446×366 / 17.6×14.4 AAA12532ON-22G 12 576×419 / 22.7×16.5 AAA12535
Recorders Easy recognizable digital recorders for efficient temperature indicating.
Models Description Cat. No.
OF-300, 450, 750 G/HRecorder (6 Point) AAA8T500Recorder (Thermal Line type) AAAE1503
Tempered Viewing Windows Optimized sample monitoring with threefold, tempered safety glass window.
(only for OF-G, ON-G Models)
ModelsDescription
Cat. No.Thickness, W×L (mm / inch)
OF / ON-02G 5, 150×280 / 0.2, 5.9×11 AAA12611OF / ON-12G, 22G 5, 150×380 / 0.2, 5.9×15 AAA12612
Fan-Speed Adjuster Adjustable inner air circulation speed, which protects spreading out powder sample.
(only for OF-G Models)
Models Description Cat. No.
OF - 02G, 12G, 22G Analog Dial Control AAA12701
※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us for details.
Wire Shelves
Perforated Shelves
Tempered Viewing Windows
Fan Speed Adjuster
for Forced & Natural Convection Ovens
OvensO
86
Vacuum Ovens
Optimal vacuum oven with a wide temperature range for various test applications.OV series ovens are ideal for separating solvents from solutions without using high temperature drying and for drying solvents with high boiling points in a vacuum ovens reduces the boiling point of the solvent to make drying easy.
Operating Features • From +5℃ above room temperature to 250℃. • Vacuum range: 0 to 0.1MPa. (analog vacuum gauge) • Microprocess PID control / Auto-tuning / Calibration. • Digital timer: 1 min to 99 hr 59 min, delayed ON / OFF. • Over temperature limit protection / Door opening alarm. • Conveniently preset 3 most commonly used temperature
settings without auto-tuning. • Digital LED display (1℃ resolution) with touch keypads. • RS-232 interface available.
Constructional Features • Separate vacuum and vent ports: the narrow vent line controls
the vacuum rate and inert. (wider the vacuum line, the faster the vacuum is produced)
• Tight gasket seal and push-button latch. • Block type heater distributes heat evenly from the chamber
exterior to the anodized. • Heat tempered spring load glass door gives a tight vacuum
seal and convenient for continuous monitoring of samples. • Moderately sized oven with user-friendly all-in-one control
panel. • Upon request available with Viton (fluorine rubber) door gasket.
(optional)
OV-11Included Accessories
Optional Accessorie see page 87
• Plate Shelve, 3.0mm (0.12˝): 2 for OV-11 / 3 for OV-12
• Safety Cover• Viton Gasket• Vacuum Pumps and Oil Mist Trap• Cold Trap Baths and U-type Glass Trap
Specifications & Ordering Information
Model OV-11 OV-12Chamber Volume (L / cu ft) 28 / 1 65 / 2.3
Vacuum Range 0~0.1MPa, Analog
Nozzle Size (mm / inch) Vacuum Ø10 / 0.4, Vent Ø10 / 0.4
Temperature
Range (℃ / ℉) Amb. +5 to 250 / Amb. +9 to 482
Fluctuation 1) (±℃ / ℉ at 100℃) 0.1 / 0.18 0.3 / 0.54
Variation 1) (±℃ / ℉ at 100℃) 3.7 / 6.66
Dimension(W×D×H)
Interior (mm / inch) 302×305×302 / 11.9×12×11.9 402×405×402 / 15.8×15.9×15.8
Exterior (mm / inch) 680×453×495 / 26.8×17.8×19.5 780×557×595 / 30.7×21.9×23.4
Net Weight (Kg / lbs) 63 / 139 103 / 227
Electrical Requirements (230V, 50 / 60 Hz) 5.3A 6.1A
Cat. No. AAH13115K AAH13125K
Electrical Requirements (120V, 50 / 60 Hz) 10A 11.7A
Cat. No. AAH13116U AAH13126U
1) Technical data according to DIN 12880.
Ovens
87
Accessories & Options
Safety Covers
Viton Gaskets
Vacuum Pumps
Cold Trap Baths
(Organization chart for use of Vacuum oven with Pump and Cold trap bath)
Safety Covers Netted steel frame and polycarbonate sheet covering prevents the glass door from
exploding.
Models Description Cat. No.OV-11 Safety Cover AAA13603OV-12 Safety Cover AAA13604
Gaskets Upon request available with Viton (fluorine rubber) door gasket.
Models Description Cat. No.
OV-11Silicone Gasket FAA5146Viton (fluorine rubber) Gasket FAA5187
OV-12Silicone Gasket FAA5147Viton (fluorine rubber) Gasket FAA5188
Related Products for Vacuum Ovens
Vacuum Pumps Rotary vacuum pump equipped with direct connect oil seal prevents air reflux,
essentially used with vacuum ovens to achieve a higher level of vacuum pressure.
Oil mist trap, an optional feature, prevents oil in-flow. (refer to page. 69 for more specific information)
Models Electrical Requirements Cat. No.MVP-6 230V, 50 / 60Hz BEH73005KRelated Accessory Oil Mist Trap BEH73501
Cold Trap Baths Preventing vacuum pumps in a condition of vacuuming as a cold trap to prevent
vapors from a vacuum pump Included 2 U-type glass traps. (refer to page. 18 for more specific information)
Models Description Cat. No.
CTB-10230V, 60Hz AAH62011K230V, 50Hz AAH62012K
Related Accessory U-type Glass Trap AAA62501
※ In addition to providing standard accessories, we will manufacture customized accessories to meet your specific requirements. Contact us.
for Vacuum Ovens