Fluoroelastomer DAIEL TM Selection GuideFluoroelastomer DAIEL TM is a sophisticated specialty elastomer with excellent heat, oil, and compressive resistance and permanent stress at high temperature, acid resistance, solvent resistance, etc.

Since its features differ based on differences between the cure system or polymer composition, it is recommended that selection be conducted as appropriate for the purpose or processing method

in order to call the performance of Fluoroelastomer DAIEL TM forth sufficiently.

Among the DAIELTM, there are three cure system, Bisphenol cure system, Peroxide cure system, and

Diamine cure system, each of which has the characteristics as shown on the DAIEL Triangle.

1.Bisphenol Curable Grade

DAI-EL G-701

2. Peroxide Curable Grade

Improving Flow

ImprovingElongation

Improving Flow

RecommendJIS 4D

DAI-EL G-671

Improvingcompression setresistance

DAI-EL G-723F

DAI-EL G-763F

DAI-EL G-702

DAI-EL G-752

DAI-EL G-704

DAI-EL G-755

DAI-EL G-783

Improving Lowtemp.Performance

DAI-EL G-751

Improving Flow

Improving compressionset resistance

DAI-EL G-7000

DAI-EL G-7801

DAI-EL G-7401

DAI-EL G-7211

DAI-EL G-7201

Improvingcompression setresistance

DAI-EL G-558

DAI-EL G-551

DAI-EL G-621

DAI-EL G-603

Medium Fluorine Content High Fluorine Content

DAI-EL G-575

DAI-EL G-801

DAI-EL LT-302DAI-EL LT-252

DAI-EL LT-304

DAI-EL G-901DAI-EL G-952

DAI-EL G-912

DAI-EL G-902

ImprovingRollWorkability

Improving Lowtemp.Performance

Improving RollWorkability +Elongation

Improving Flow

DAI-EL G-716

DAIEL TM Triangle

Low Extraction

Low Outgassing

Food Sanitation

PeroxideCure System

DiamineCure System

BisphenolCure System

Mold Releasing

Adhesion to other material

Scorch Stability

Handling, Workability

Adhesion to other material

Continuous Cureing Calcination

Mechanical Properties

Make Coating

Scorch Stability

Quick Curing

Coloring

Elasticity Properties

3. Diamine Curable Grade DAI-EL G-211

DAI-EL G-501NK

Improving Chemical Resistance, Fuel Barrier

Improving Low temp. / Sealing Performance

Selection Guide

RecommendedExtrusion/Calendering MoldRecommend

JIS 4D

Improving Lowtemp.Performance

Improving Low temp.Performance

ImprovingMold release+Elongation

Improvement of Low temp.Performance

Improving Lowtemo.Performance

Co-polymer Ter-polymer

DAI-EL G-557

Improving Elongation