d2r72yk5wmppdj.cloudfront.net · ca seg od d k technical information 43 double pedestal desk with...
TRANSCRIPT
foundation – casegoods& conferencing
GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PR ICE GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
foundations – casegoods & conferencing – June 19, 2017
general information
PRODUCT MAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
WHERE TO ORDER / HOW TO USE THI S GU IDE . . . . . . . . . . . . . 9
S PEC IF ICAT ION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
GENERAL INSTALLAT ION & HARDWARE . . . . . . . . . . . . . . . . . . 12
CARE & MA INTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
WARRANTY / TERMS & CONDIT IONS . . . . . . . . . . . . . . . . . . . . 14
SER IES DETA ILS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6
F IN I SHES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
KEY AL IKE FORM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
TYP ICALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
foundations – casegoods & conferencing – June 19, 2017
general information
foundations – casegoods & conferencing – June 19, 2017
PAGE CODE PAGE CODE PAGE
product map
General Information
Where to Order/How to Use this Guide 9
Specification 10Series Details 10Construction 10Veneers & Wood Solids 11Teknion Wood Conversion Varnish Specifications 11
General Installation & Hardware 12
Care & Maintenance 13
Warranty / Terms & Conditions 14
Series Details 16Optional Grommet Locations for Desks, Credenzas and Returns 16Optional Grommet Locations on Work Walls 17Work Wall Display Niches 18Work Wall Lighting 18Optional Grommet Locations for Conference Table Tops 19Conference Table Top and Base Guide 20Technology Trough Details 21
Finishes 22Edges and Handles Available 23Double and Single Pedestal Desks 24Transaction Counter and Decorative Panel 24Modular Pedestals 25Lateral Files 25Mobile Pedestals 26Benches 26Credenzas 27Modular Tops 27Wall Mounted Overheads 28Work Wall Credenzas 28Work Walls 29Sectional Top with two bases 30Sectional Top with Technology Trough and Bases 30Full Storage Credenza with Two Sets of Storage Cabinets and Display Wall 31Full Storage Credenza with BBB,Storage Cabinet,BBB and Display Wall 31Full Storage Credenza with BB, Storage Cabinet,BB and Display Wall 32Lecturn 32Mobile Units 33
Key Alike Form 34
Typicals 36
Casegoods Desks
Technical Information 43
Double Pedestal Desk with Box/FilePedestal flush on Left and Right FD-BB 44
Double Pedestal Desk with Box/FilePedestal offset on Left and Right FD-BBOS 44
Single Pedestal Desk with Box/FilePedestal flush on Left FSL-B 44
Single Pedestal Desk with Box/FilePedestal offset on Left FSL-BOS 45
Single Pedestal Desk with Box/FilePedestal flush on Right FSR-B 45
Single Pedestal Desk with Box/FilePedestal offset on Right FSR-BOS 45
Desk Shell FT 46
Rectangular Transaction Counter withDecorative Panel FGTT 46
Hanging Wood Modesty Panel FCMP-W 46
Hanging Glass Modesty Panel FCMP-G 47
Casegoods SinglePedestal Credenzas
Technical Information 48
Single Pedestal Credenza with Box/FilePedestal flush on Left FCCL-B 49
Single Pedestal Credenza with Box/FilePedestal offset on Left FCCL-BOS 49
Single Pedestal Credenza with Box/FilePedestal flush on Right FCCR-B 49
Single Pedestal Credenza with Box/FilePedestal offset on Right FCCR-BOS 49
Single Pedestal Credenza with 35”Lateral Box/File flush on Left FCC35L-H 50
Single Pedestal Credenza with 35” Lateral Box/File offset on Left FCC35L-HOS 50
Single Pedestal Credenza with 35” Lateral Box/File flush on Right FCC35R-H 50
Single Pedestal Credenza with 35” Lateral Box/File offset on RightFCC35R-HOS 50
Single Pedestal Credenza with 40” Lateral Box/File flush on Left C.2FCC40L-H 51
Single Pedestal Credenza with 40” Lateral Box/File offset on LeftFCC40L-HOS 51
Single Pedestal Credenza with 40” Lateral Box/File flush on Right FCC40R-H 51
Single Pedestal Credenza with 40” Lateral File Box/File offset on RightFCC40R-HOS 51
Casegoods FullStorage Credenzas
Technical Information 52
Credenza with Lat. Box/File on Left and Open Storage on RightFCC-HO 52
Credenza with Open Storage on Left and Lateral Box/File on Right FCC-OH 52
Credenza with Lat. Box/File on Left and RightFCC-HH 53
Credenza with 4 Doors and Adjustable ShelvesFCC-XX 53
Credenza with 2 Doors and Adjustable ShelvesFCC-X 53
Casegoods Modular Storage
Technical Information 54
Box/File Pedestal handed Left F-BL 54
Box/File Pedestal handed Right F-BR 54
general information
foundations – casegoods & conferencing – June 19, 2017
CODE PAGE CODE PAGE CODE PAGE
product map
Lateral Box/File Pedestal handed LeftF-HL 55
Lat. Box/File Pedestal handedRightF-HR 55
Frame Leg FLEG 55
Top Connecting Bracket FCON 55
Modular Top F-T 56
CasegoodsFreestanding Storage
Technical Information 57
Left Freestanding 2H Lateral File PedestalFN-L 57
Right Freestanding 2H Lateral File PedestalFN-R 57
Left Freestanding 3H LateralFile PedestalFN-3L 57
Right Freestanding 3H Lateral File Pedestal FN-3R 58
Bench with two File Drawers and Cushion FBENKK 58
Bench with one File Drawer and Cushion FBENK 58
Mobile Box/Box Pedestal with cushionF-BMCU 58
Casegoods Returns
Technical Information 59
Left Executive ReturnFERL-CG 59
Right Executive ReturnFERR-CG 59
Left Executive Return with Box/File Pedestal FERL-BCG 60
Left Executive Return with Box/FilePedestal offset FERL-BOSCG 60
95” wide x 70” high Work Wall FW9570-1L 67
95” wide x 70” high Work Wall FW9570-1R 67
110” wide x 70” high Work Wall FW11070-1L 67
110” wide x 70” high Work Wall FW11070-1R 68
110” wide x 70” high Work Wall FW11070-2L 68
110” wide x 70” high Work Wall FW11070-2R 68
125” wide x 70” high Work Wall FW12570-1L 68
125” wide x 70” high Work Wall FW12570-1R 69
125” wide x 70” high Work Wall FW12570-2L 69
125” wide x 70” high Work Wall FW12570-2R 69
140” wide x 70” high Work Wall FW14070-1L 69
140” wide x 70” high Work Wall FW14070-1R 70
155” wide x 70” high Work WallFW15570-1L 70
155” wide x 70” high Work Wall FW15570-1R 70
95” wide x 56” high Work Wall FW9556-1 70
95” wide x 56” high Work Wall FW9556-2 71
110” wide x 56” high Work Wall FW11056-1L 71
110” wide x 56” high Work WallFW11056-1R 71
110” wide x 56” high Work Wall FW11056-2L 71
110” wide x 56” high Work Wall FW11056-2R 72
110” wide x 56” high Work Wall FW11056-3L 72
110” wide x 56” high Work Wall FW11056-3R 72
Right Executive Return with Box/FilePedestal flush FERR-BCG 60
Right Executive Return with Box/FilePedestal offset FERR-BOSCG 61
Casegoods Bridges
Technical Information 62
Bridge Top FBT-CG 62
Casegoods Wall Mount Storage
Technical Information 63
Wall Mount Storage with DoorsFSF 63
Wall Mount Tackboard FTS 63
Casegoods Work Walls
Technical Information 64
95” wide x 84” high Work Wall FW9584-1L 64
95” wide x 84” high Work Wall FW9584-1R 64
95” wide x 84” high Work Wall FW9584-2L 64
95” wide x 84” high Work Wall FW9584-2R 65
110” wide x 84” high Work Wall FW11084-1L 65
110” wide x 84” high Work WallFW11084-1R 65
110” wide x 84” high Work WallFW11084-2L 65
110” wide x 84” high Work WallFW11084-2R 66
125” wide x 84” high Work Wall FW12584-1L 66
125” wide x 84” high Work Wall FW12584-1R 66
140” wide x 84” high Work Wall FW14084-1L 66
140” wide x 84” high Work Wall FW14084-1R 67
general information
foundations – casegoods & conferencing – June 19, 2017
product mapCODE PAGE CODE PAGE CODE PAGE
110” wide x 84” high Open Knee Space Work Wall FW11084OW2R 78
125” wide x 84” high Open Knee Space Work Wall FW12584OIL 78
90” wide x 26” high Work WallCredenzaFW9026-1 78
90” wide x 26” high Work WallCredenzaFW9026-2 78
90” wide x 26” high Work WallCredenzaFW9026-3 79
90” wide x 26” high Work WallCredenzaFW9026-4 79
Conference Room Furniture
Technical Information 80
Full Storage Credenza with two sets of Storage CabinetsFC-xx 80
Full Storage Credenza with BBB on Left, Storage Cabinet and BBB on RightFCD-A 80
Decorative Credenza Back PanelFBP 80
Full Storage Credenza with two sets of Storage Cabinets and Display WallFC-GGTWH 81
Full Storage Credenza with BBB, Storage Cabinet, BBB and Display WallFCD-ATWH 81
Full Storage Credenza with BB, StorageCabinet, BB and Display WallFFTWA-WH 82
TV Mount for Flat Screen Monitors up to 50”FVMED 82
TV Mount for Flat Screen Monitors over 50”FVLRG 82
Lectern FLEC-36 82
Lectern FLEC-24 83
Mobile Lectern FLEC-24M 83
Mobile Server FSM 83
Mobile Tech CartFTCM 83
Conference Tables
Technical Information 84
Rectangular Shaped Conference Table,one-piece top FRE 84
Rectangular Shaped Conference Table,two-piece top FRE 84
Rectangular Shaped Conference Table,two-piece top FRE 84
Rectangular Shaped Sectional Conference Table FREST 85
Rectangular Shaped Sectional Conference Table FREST 85
Rectangular Shaped Sectional Conference Table FRESTCT 85
Rectangular Shaped Sectional Conference Table FRESTCT 85
Rectangular Shaped Conference Tablewith Bow Ends, one-piece topFREBE 86
Rectangular Shaped Conference Tablewith Bow Ends, two-piece top FREBE 86
Rectangular Shaped Conference Tablewith Bow Ends, two-piece top FREBE 86
Rectangular Shaped Sectional Conference Table with Bow EndsFREBEST 86
Rectangular Shaped Sectional Conference Table with Bow Ends FREBEST 87
Rectangular Shaped Sectional Conference Table with Bow Ends FREBESTCT 87
110” wide x 56” high Work Wall FW11056-4L 72
110” wide x 56” high Work Wall FW11056-4R 73
95” wide x 84” high Work Wall FW9584-20 73
95” wide x 84” high Work Wall FW9584-21 73
95” wide x 84” high Work Wall FW9584-22 73
110” wide x 84” high Work Wall FW11084-20L 74
110” wide x 84” high Work WallFW11084-20R 74
125” wide x 84” high Work Wall FW12584-20 74
125” wide x 84” high Work Wall FW12584-21 74
95” wide x 70” high Work Wall FW9570-20 75
110” wide x 70” high Work Wall FW11070-20 75
125” wide x 70” high Work Wall FW12570-20 75
125” wide x 70” high Work Wall FW12570-21L 75
125” wide x 70” high Work Wall FW12570-21R 76
140” wide x 70” high Work Wall FW14070-20 76
140” wide x 70” high Work Wall FW14070-21L 76
140” wide x 70” high Work WallFW14070-21R 76
155” wide x 70” high Work Wall FW15570-20 77
107” wide x 84” high Work Wall FW10784L 77
92” wide x 70” high Open Knee SpaceWork Wall FW9270O2R 77
95” wide x 84” high Open Knee SpaceWork Wall FW9584OWR 77
general information
foundations – casegoods & conferencing – June 19, 2017
product mapCODE PAGE CODE PAGE CODE PAGE
Rectangular Shaped Sectional Conference Table with Bow EndsFREBESTCT 87
Boat Shaped Conference Table, one-piece topFBO 87
Boat Shaped Conference Table, twopiece topFBO 88
Boat Shaped Conference Table, two piece topFBO 88
Boat Shaped Sectional Conference TableFBOST 88
Boat Shaped Sectional Conference TableFBOST 88
Boat Shaped Sectional Conference TableFBOSTCT 89
Boat Shaped Sectional Conference TableFBOSTCT 89
Boat Shaped Conference Table, one piece topFBOBE 89
Boat Shaped Conference Table, two piece topFBOBE 89
Boat Shaped Conference Table, two piece topFBOBE 90
Boat Shaped Sectional Conference TableFBOBEST 90
Boat Shaped Sectional Conference TableFBOBEST 90
Boat Shaped Sectional Conference TableFBOBESTCT 90
Boat Shaped Sectional Conference TableFBOBESTCT 91
Racetrack Conference Table, one-piece topFRA 91
Racetrack Conference Table, two-piece topFRA 91
Racetrack Conference Table, two-piece topFRA 91
Racetrack Sectional Conference TableFRAST 92
Racetrack Sectional Conference TableFRAST 92
Racetrack Sectional Conference TableFRASTCT 92
Racetrack Sectional Conference TableFRASTCT 92
Wedge Shaped Conference Table, one piece topFWE 93
Wedge Shaped Conference Table, two piece topFWE 93
Wedge Shaped Conference Table, two piece topFWE 93
Wedge Shaped Sectional ConferenceTableFWEST 93
Wedge Shaped Sectional ConferenceTableFWEST 94
Wedge Shaped Sectional Conference TableFWESTCT 94
Wedge Shaped Sectional Conference TableFWESTCT 94
Square TableFRE 94
Round TableFRO 95
Accessories
Vault Conference Power GrommetBTC001 96
Vault Conference Power GrommetBTC002 96
Vault Desk Power GrommetBTC003 96
Power/Data Management,1 Duplex, 1 Telcom K/O, 10’ CordESMR 96
Power/Data Management,1 Duplex, 1 Telcom K/O, HardwireESMR 97
Power/Data Management,2 Duplex, 1 Telcom K/O, 10’ CordESMR 97
Power/Data Management,2 Duplex, 1 Telcom K/O, HardwireESMR 97
Power/Data Management,2 Duplex, 2 Telcom K/O, 10’ CordESMR 97
Power/Data Management,2 Duplex, 2 Telcom K/O, HardwireESMR 98
Power/Data Management,2 Duplex, 3 Telcom K/O, 10’ CordESMR 98
Power/Data Management, 2 Duplex,3 Telcom K/O, HardwireESMR 98
Power/Data Management,3 Duplex, 2 Telcom K/O, 10’ CordESMR 98
Power/Data Management,3 Duplex, 2 Telcom K/O, HardwireESMR 99
Power/Data Management, RecessedDoor 1 Duplex, 1 Telcom K/O, 10” CordLRTM1 99
Power/Data Management, RecessedDoor, 2 Duplex, 2 Telcom K/O, 10” CordLRTM2 99
Power Kit for End Base Feed with 4 DoorsPKE 99
Power Kit for End Base Feed with 8 DoorsPKE 100
Power Kit for Centre Base Feed with 8 DoorsPKC 100
Telcom PlateABLBB 100
Telcom PlateABLBBBB 100
Telcom PlateABLABC514 101
Telcom PlateABLC51L 101
Telcom PlateABLABC45 101
Telcom PlateABL102102 101
T5 TasklightFLUC 102
general information
foundations – casegoods & conferencing – June 19, 2017
CODE PAGE CODE PAGE CODE PAGE
product map
LED LightFLED 102
LED Snake Light with dimmerLIG 102
MicrophoneMIC 102
Wire Management SnakeVVACSBLK 103
Lock AssemblyLO 103
Lock Drum with KeyLOB 103
Lock KeyLOCK 103
Round Grommet - PlasticGM1 104
Rectangular Grommet - MetalGM5 104
Quick ConnectorQC 104
general information
foundations – casegoods & conferencing – June 29, 2015
where to order / how to use this guide
Teknion LLC U.S.A. 1-866-483-5646
Please refer to Teknioninfo.com for the most current “Who to Call List”
AREA CUSTOMER SERVICE
More than a casegoods price list this Price and Product Guide is designed to provide you with clear information on ordering and specifying the Teknion Wood casegoods product line. The varioussections will introduce you to the Price and Product Guide and walk you through specification and product information that will familiarize you with Teknion Wood product and quality. This will helpmake it easy to understand and use the information in this Guide to apply Teknion Wood to the context of your plan and put it all together into an order.
IntroductionIntended to familiarize you with the price list format and give general product number specification instruction.
Specification SectionIncludes construction characteristics graphics or edge details.
General InformationIncludes subdivision sections of casegoods construction varnish specification veneers and wood solids finishing process general installation and hardware maintenance terms and conditions of salewarranty and finally where to order.
ISO 9001:2000 RegisteredThe Teknion Wood Factory is ISO 9001:2000 registered for manufacturing procedures and practices of quality and quality control processes.
ANSI/BIFMA CertifiedTeknion Wood casegoods have passed ANSI/BIFMA standards for product construction and durability.
Price List Effective: June 29, 2015
Codes:The price list uses a numbering system with meaningfulalphanumeric characters to create a simple-to-understand product number.This makes specifying the product easy and accurate.
Specification Example Of A Desk UnitIncludes construction characteristics graphics or edge details.
Product Code:FSL7230BF = FoundationsS = SingleL = Pedestal on Left7230 = Size: Width x DepthB = Pedestal StyleFINISH: Choose Finish
HOW TO USE THIS PRICE & PRODUCT GUIDE
Example - How to Specify
NOTE: Arrow indicates direction of grain.
general information
foundations – casegoods & conferencing – June 19, 2017
specification
LockingLocks are standard on all “below Worksurface level” drawer and door storage units with the exception of the stationary organizer pull-out tray units and single lateral file drawer combination tray/slot units. Combinationstorage unit comes with lock for file and lateral file drawer only box drawers cannot lock. Lock color will match the handle option.Locks are optional on all “above Worksurface level” closed storage. See Accessories Section for lock specification details.
Series Detailing - PhiladelphiaPhiladelphia detailing is traditional with a 1" overhang on all edges. Solid walnut cherry maple that bands Worksurface perimeter is 1" wide by 1 3/8" thick for an overall thickness of 1 3/8". Philadelphia is a “topover pedestal” detailed series. Philadelphia is standard with a base. Floor storage unit bases (i.e. kick-plates on pedestals lateral files bookcases etc.) are extended out over drawer faces and horizontally grained. Productsthat are normally positioned against walls such as credenzas have a self-edge veneered back edge detail. All primary faces have pin molding decorations.
Series Detailing - KoratoKorato detailing is contemporary with a variety of edges with a 1' overhang on all edges. Solid walnut cherry maple that bands worksurface perimeter is 1" wide by 1 3/8" thick for an overall thickness of 1 3/8".Korato is a “top over end-panel” detailed series with a 1/4" reveal between top and end-panel. Floor storage unit bases (i.e. kick-plates on pedestals lateral files bookcases etc.) are flush to drawer faces and horizontallygrained. Products that normally positioned against walls such as credenza have a self-edge veneered back edge detail.
Series Detailing - ModenaModena detailing is contemporary with a detailed edge on user and guest sides self-edge veneer on ends and wall sides. Solid walnut cherry maple that bands user and guest sides is 1" wide by 1 3/8" thick for anoverall thickness of 1 3/8". Modena is a “top over pedestal” detailed series with a 1/4" reveal between top and end-panel. Tops are flush with end-panel for storage. Floor storage unit bases (i.e. kick-plates onpedestals lateral files bookcases etc.) are recessed to drawer faces and horizontally grained. Products that are normally positioned against walls such as credenzas have a self-edge veneered back edge detail.
Series Detailing - VolterraVolterra detailing is contemporary with a variety of edge options on all perimeter edges. Solid walnut cherry maple that bands edges tops is 1/4" wide by 1 3/8" thick for an overall thickness of 1 3/8". For U Edgesolid walnut cherry maple that band edge tops 1/8" wide by 1 3/16" thick for an overall thickness of 1 3/16". Volterra is a “top over end-panel” detailed series with a 1/4" reveal between top and end-panel. Topsare flush with end-panel and storage. Floor storage unit bases (i.e. kick-plates on pedestals lateral files bookcases etc.) are recessed to drawer faces and horizontally grained.
Series HandlesIf no handle is specified there will be a routed finger pull in drawer fronts and touch latch mechanism for doors.
SERIES DETAILS
FinishConversion varnish (similar to catalyzed lacquer but tougher) 25˚ sheen. Teknion Wood does not buff or rub its finishes.
360o FinishingAll Teknion Wood wood casegood products are veneered and finished on the back sides (except modular under-surface storage - tops and backs are unfinished).
Veneers and SolidsVeneers and solids are “Number one select architectural grade A” walnut cherry and maple. All Teknion Wood wood Worksurface molded edges are solid walnut cherry and maple (except where square self-edges exist i.e. credenza and computer Worksurface back edges that are mostcommonly against walls).
PedestalsFull-to-the-floor. Pedestals are fully assembled units that are either installed into desk and credenza shells or available as modular. Undersurface storage units provide standard locks.
Drawer SuspensionsPedestal drawer suspensions are metal ball bearing type. Box drawers are 3/4 extension file drawers are full extension.
Drawer ConstructionDrawer sides and bottoms are Maple.
Drawer FrontsThe drawer front is an applied element to a four sided drawer. Drawer fronts are veneered on all surfaces except the vertical edges which are solid walnut cherry or maple then routed with seriesdetailing. Drawer fronts can be removed or replaced in the field.
Leveling GlidesLevelers have a 1" range of adjustment.
CONSTRUCTION
general information
foundations – casegoods & conferencing – June 19, 2017
specification
Teknion Wood Selection Process for Veneers and SolidsTeknion Wood utilizes only “Number one select architectural grade A” American black walnut American black cherry or hard maple veneers and solids. This description reflects the quality (welldeveloped heart-graining of cathedrals) clarity (largely free of knots sap pockets and natural defects) and consistency of the veneer and solids.
Teknion Wood sources its veneers from both Canada and the U.S. Some of these sources include Interforest Inc. General Woods & Veneer Inc. of Canada Amos Hill Inc. and David Webb Inc. of Indiana.
Veneer is selected and purchased by the half-log or by flitch. These flitches are boiled for days to soften the wood then sliced into veneer.
Veneer thickness is determined by various wood and reforestation organizations most commonly to increase the yield per flitch and help control the consumption of this slowly renewable resource.
Veneer thickness are predicated on the hardness and grain-tightness of any particular wood species. Currently architectural grade thickness is all follows: - walnut cherry maple 1/50"
Teknion Wood lays-up its own flat-cut (cathedral pattern) Cherry Maple and Walnut veneers in book matched sets and patterns for proper balance and appearance.
For additional veneer species cuts and patterns please contact your Teknion Wood technical services representative.
VENEERS & WOOD SOLIDS
Teknion Wood Uses Conversion VarnishIt is among the most durable finishes used in the Contract Furniture Industry (more durable than catalyzed lacquer).
Conversion varnish is a synthetic catalyzed cured (chemically active) finish containing UV inhibitors to slow the oxidizing (color changing) effects of the ultra-violet rays on wood.
Teknion Wood achieves a 25˚ sheen. Low sheens are the most practical for commercial use because they don’t show most scratches and are more easily touched-up that higher sheens.
Cures with heat developed two ways: - chemically (catalyst reaction within the varnish itself) - line oven (approximately 140˚ F) accelerates finish curing and increases molecular density for a harder finish
Conversion varnish has a component called “solids” produced by a combination of resins when the solvent evaporates. These solids float to the varnish surface which is where they cure. These solidsare the durable aspect of the finish.
Teknion Wood uses an “off-the-gun” technique with conversion varnish. This means the “solids” (the durable aspect of the finish) remain intact on the surface of the finish.
Teknion Wood standard finish on walnut is open pore and on cherry and maple is semi-closed pore.
Custom finish is available.
TEKNION WOOD CONVERSION VARNISH SPECIFICATIONS
general information
general installation & hardware
foundations – casegoods & conferencing – June 19, 2017
UncartoningAlways uncarton wood office furniture with care. Never use a knife or sharp object of any kind to open cartons. Tear cartoning tape off by hand. Protective corner blocks foam-wrap and a bottomskid are included in the carton during shipping for protection.
HardwareAll necessary hardware items for attaching furniture items are included in the shipment. Actual wall-attachment fasteners for wall cabinets tackboards and visual boards are not included due tovariation between site conditions.
Hanging file rails are pre-installed on file drawer perimeters with additional front-to-back rails taped to the installed rail. These rails hang onto plastic clips and do not require any tools to install. Theback rail in a lateral file drawer is designed for both legal and letter size filing. To adjust back rail simply install the rail to the pre-drilled holes accordingly.
Flat-plates for attaching bridge and return to desk are shipped pre-attached to the bottom of the bridge or return. Mini-flat-plates for securing bridge modesty panels to desk or credenza end-panelsand quick connectors for securing modular corner units to adjacent pieces are shipped along with screws in a plastic bag attached to the bottom of the bridge or return.
Caution: Using screws other than those supplied by Teknion Wood could result in damage to finished tops. Teknion Wood will not honor claims due to installers using the incorrect hardware.
InstallationWall-mounted cabinets tackboards and visual boards are pre-attached with horizontal wall rails to the back of each unit. The wall-side components must be detached from the unit and fastened tothe wall accordingly. Wall fasteners are not included due to the variation between site conditions.Securing the wall rail to a vertical structural member is the required manner of installation. The cabinet or visual board is then lowered on to the wall rail. It is important to level the wall rail before installation.Wall cabinets are equipped with levelers at the bottom of the side panels for proper cabinet alignment. Units with doors are equipped with adjustable European door hinges to assist in door alignment.It is required to use a #8 wood screw through the back of the cabinet and the wall-mounted rail to further secure the wall attachment.Tackboards have vertical grooves in the back for tasklight wiring.
Hutches are installed with double- faced tape applied to the bottom of the end panels. Teknion Wood utilizes a non-marring method of hutch attachment. The tape is shipped in a plastic bag foundin the hutch.Removal of the hutch requires moderate pressure to be applied on the top of the unit towards the wall for at least a minute for the pressure-sensitive tape to release.At the dealer or installer’s discretion additional support may be added by installing flat-plates along the outside back of the attached units. These flat-plates are not included in the shipment.
Hutch tackboards are factory installed.
Modular storage units have pre-drilled holes through the unfinished tops for securing to the bottom of the Worksurfaces. Screws and lock keys are included in a plastic bag fastened inside thepedestal. Installer should leave a 1/8" reveal between the modular storage unit and the end panel. Disassemble the modular unit first before relocating the entire unit to avoid damage or body injuries.
5-sided corner tables and adjoining bridge and credenza run-offs are attached with quick-connectors shipped in a plastic bag.Recessed end-panels in these units are pre-drilled to accept the quick-connectors for easy alignment. Accurate leveling is critical for these units to align and connect properly. Flat-plates are pre-attached to the Worksurface to secure onto the desk unit.
Upon completing installation wipe furniture with a damp cloth followed by a dry soft cloth.
Leveling wood office furniture properly is the most important procedure to ensure proper functioning and alignment of drawers locks and doors.
general information
care & maintenance
foundations – casegoods & conferencing – June 19, 2017
Wood Casegoods CareTeknion Wood furniture is constructed to strict specification to ensure years of satisfied use. As with all wood products certain care requirements and periodic maintenance are necessary in order tomaintain the original new appearance and function.
Finish ProtectionAll clear wood finishes are susceptible to scratches from rough and abusive objects such as staples paper clips ceramic coffee mugs flower pots picture frames etc. Computer equipment with rubberfeet can also cause discoloration and softening of the finish due to petroleum distillates in the rubber.
Glass tops are the ultimate protection against scratch mishaps.
The most practical protection is the use of desk-pads or blotters paper management bins coasters common-sense caution with rough items and adding pressure-sensitive felt to the feet or bottomsof an potentially destructive item on the desk.
Finish CareWax or polish should never be used on catalyzed finish they will give a greasy cloudy or uneven appearance to the product. Teknion Wood’s conversion varnish finish is best cleaned by wiping thesurfaces with a damp cloth followed by a soft dry cloth in the direction of the grain. If the surfaces are really dirty use of a glass cleaning type of product is recommended.
Never use a silicon based product to dust or polish catalyzed finishes. Over time silicon may disrupt the actual molecular composition of the finish and cause it to soften and become cloudy.
Additional Tips:
Remove any spilled liquid immediately with a blotting rather than wiping motion.
Do not drag or push objects or stacks of papers across any finely finished surface. Paper staples and paper clips will scratch wood finishes.
Avoid exposing surfaces to extreme heat cold or humidity.
The surface finish may be burn resistant however the wood underneath the finish is not and can be charred by a burning cigarette or heat producing unit.
Exposure to strong sunlight should be avoided. The surface finish is fade-proof however in spite of UV inhibitors in the finish the wood underneath may change color (patina) where extendedexposure to sunlight exists. Natural or light finished species are especially susceptible to UV color change.
Building maintenance and maintenance service management should be notified of the proper care instructions and procedures for your furniture to avoid damage and allow optimum appearance foryears to come.
Special care should be taken to protect wood furniture when other trades are present performing work such as painters electricians and telecommunications workers running wires through the ceilingand walls etc.
Drawer suspensions are lubricated prior to shipment. Periodic lubrication may be applied to the ball bearing housing if necessary with a high quality lubricant found in most hardware stores.
Drawer alignment is achieved with proper leveling of desks and credenzas.
Check leveling glides for adjustment if the furniture is moved.
Modular furniture items such as desk shells and modular pedestals must be disassembled prior to moving or relocating to avoid damage to the furniture.
Hutch and wall cabinet doors may require field adjustment from time to time due to shifting weight load factors inside the cabinet.
Touch-up of wood furniture should only be attempted by a qualified refinisher/touch-up technician. Contact your furniture dealer if this need should arise.
general information
warranty / terms & conditions
foundations – casegoods & conferencing – June 19, 2017
Description
Sales of Teknion Wood products are made onlyon Teknion Wood standard terms andconditions of sale which are contained in thePrice Book and in Teknion Wood order
acknowledgements. These standard terms andconditions may be modified or supplementedonly by a separately written document signedby Teknion Wood authorized personnel at itshead office in Mount Laurel New Jersey. Theseterms supersede any contrary provisionpresented by Purchaser in any written form orotherwise and may not be changed in anymanner other than in writing signed by anauthorized representative of Teknion Wood. Tothe extent that these terms and conditionsconstitute an acceptance by Teknion Wood ofany offer by Purchaser the acceptance isexpressly conditioned on Purchaser’s assent toterms and conditions herein which areadditional to or different from those presentedby Purchaser. To them extent that any portionof these terms and conditions constitute anoffer acceptance is expressly limited to theterms of this offer.
All illustrations specifications and prices in thisPrice List are based on the latest productinformation available at the time of publicationapproval. The right is reserved to makechanges at any time and without prior noticeto prices colors materials specifications andmodels offered.
Prices and Payment
The prices shown in this Price List as well asthose quoted by Teknion Wood shall be in U.S.dollars for orders shipped to destinations withinthe continental United States.
Prices listed herein are for standard product.Quotations for special product are availablethrough Teknion Wood’s Technical SupportDepartment in Mount Laurel New Jersey.
If shipping date requested is more than 90days from date of order Teknion Wood shallhave the right to use published list priceseffective at the time of shipment.
Not included in the list price are special orexport packing unpacking and installation.Orders are invoiced at the time of shipment.Terms of payment are net 30 days from dateof invoice. The customer agrees that Teknion
Wood shall have the right to enforce a chargeamounting to 2% per month of invoicesoutstanding more than 30 days.
For Payments only mail to:
Teknion LLC P.O. Box 8538-143 Philadelphia PA 19171
Any products sold shall remain the property ofTeknion Wood and shall remain its personalproperty until fully paid for in cash. ThePurchaser agrees to perform all acts which maybe necessary to perfect and assure retentionof title to such products to Teknion Wood untilsuch time as the goods have been paid forin full.
Freight charges will be prepaid by TeknionWood to destinations within the ContinentalUnited States subject to the followingadditional charges:
For purchase orders for product having a listprice at $1 - $10000 add 5% of list price.
Teknion Wood shall determine the mostappropriate method of shipment routing andcarrier. Should the Purchaser request specialpackaging or method of shipment anyadditional expense will be the responsibility ofthe Purchaser.
Taxes
All sales use excise and other applicable taxes(excluding only taxes on the net income ofTeknion Wood) are the Purchaser'sresponsibility and will be invoiced to thePurchaser. If Purchaser claims an exemptionfrom such taxes it shall be the Purchaser'sresponsibility to furnish an appropriateexemption certificate to Teknion Wood.
Order Information
Teknion Wood requires that all orders besubmitted in writing to avoid errors and/orduplication. Orders will be acknowledged onTekniOnline. The details appearing onTekniOnline will describe the items to beshipped to Purchaser who must ascertain thatthey are correct. If not Purchaser should notifyTeknion Wood immediately by telephone orfax followed by written confirmation.Acknowledgement shows approximateshipping date of items ordered. Shipping datesare assigned to orders based on the item
having the longest manufacturing lead time.Orders with Customer's Own Material(C.O.M.) or missing or incorrect information(finish selections fabric selections etc.) will bescheduled for manufacturing upon receipt ofC.O.M. or correct and complete information.Purchaser must indicate if multiple shippingschedules are required. Each shipment will beinvoiced at time of shipping and will be subjectto payment terms described above.
C.O.M. Customer's Own Material
Should Purchaser request a fabric not standardto the Teknion Wood upholstery line Purchasermust submit a sample of not less than twoyards for approval. Teknion Wood willdetermine whether fabric is suitable tomanufacturing process and applicable UL orcode requirements. Should Teknion Wood berequired to test such fabric it shall so advisePurchaser and Purchaser shall be responsiblefor all costs associated therewith.
Fabric yardage requirements will be advisedby Teknion Wood. An additional charge maybe made to cover the cost of cutting matchingor sewing unusual or directional patterns.Teknion Wood shall have no responsibility forcondition quality performance physicalproperties or any other aspect of C.O.M. Forpanels price as if grade 1 fabric is used.
Teknion Wood reserves the right to reject anyC.O.M. deemed unsuitable.
Teknion Wood reserves the right to cancel anorder at any time if C.O.M. is in the solejudgement of Teknion Wood inadequate forany reason.
Changes and Cancellation
Changes to Purchaser’s order are subject toTeknion Wood’s published change order rules.Purchaser’s order may not be cancelled byPurchaser without the written consent ofTeknion Wood. Special order items and fabric-covered items already in production are notsubject to change or cancellation under anycircumstances.
Code Restrictions
Teknion Wood’s products are portable furnitureand as such may be subject to local fireelectrical and/or building codes applicable toportable furniture. However since local codes
vary from area to area the Purchaser isresponsible for the proper application ofTeknion Wood items within the limitations oflocal codes.
Service
Service problems are normally handled by theTeknion Wood authorized dealer asappropriate. Where this cannot beaccomplished on a local level service problemsshould be referred to:
Teknion Wood Customer ServiceDepartment 350 Fellowship Road Mount Laurel New Jersey 08054 877.TEKNION
Storage
In the event Purchaser requests postponementof delivery beyond the acknowledged shippingdate Teknion Wood may transfer the goods tostorage for Purchaser's account and atPurchaser's risk and expense. Such transfer tostorage shall be deemed shipment toPurchaser for all purposes including invoicingand payment.
Delays
Teknion Wood order acknowledgement willstate a shipping date which is Teknion Wood’sbest estimate at the time the order isacknowledged. However Teknion Wood shallnot incur any obligation or liability to Purchaserfor failure to ship by a specified date unlessTeknion Wood has agreed to an unequivocalfirm shipping date in a separately signedwritten document executed by its authorizedpersonnel at its corporate office. In additionTeknion Wood shall not be liable for any lossor damage resulting from any delay or failurein shipment or other failure to perform all orany part of the agreement between the partieswith respect to the goods shown on the faceof the order acknowledgement where suchdelay failure loss or damage is the proximateresult of any act of any governmental authorityor political subdivision thereof revolution riotcivil disorder or disturbance act of enemiesdelay or default in transportation strikedisputes among or between labor unions orother labor disputes delay or inability inobtaining materials and facilities fire flood actof God or any cause not within the reasonable
general information
warranty / terms & conditions
foundations – casegoods & conferencing – June 19, 2017
control at Teknion Wood whether of the classof causes enumerated or otherwise. Withoutlimiting the generality of the foregoing TeknionWood may without causing any breach orincurring liability allocate goods which are inshort supply regardless of the reasonstherefore among purchasers in any mannerwhich Teknion Wood in its sole discretiondeems advisable.
Suspension
In the event that the Purchaser defaults in thepayment of any sum due Teknion Wood or in theevent the Purchaser's financial condition becomesunsatisfactory to Teknion Wood Teknion Woodshall have the right as its option upon notice tothe Purchaser to defer or discontinue shipmentof any goods until such time as the default iscured or the Purchaser provides assurance ofpayment to Teknion Wood in such form contentand/or amounts as Teknion Wood in its solediscretion deems adequate.
Back Charges
Teknion Wood will not accept charges forexpense incurred by the Purchaser in expeditingshipments. Teknion Wood will not acceptcharges for the repair of damage by others.
Claims
All goods are sold A.O.B. Toronto Canada.Teknion Wood is not responsible for damagewhich occurs in transit or in storage. The carriersigns for all goods received in apparently goodorder. It is the Purchaser's responsibility toexamine goods upon receipt and to file anyclaims with the carrier. Any claims againstTeknion Wood for apparent defects errors orshortages must be made by the Purchaser inwriting within ten (5) working days after anydelivery for a full truckload or ten (10) daysfor any delivery for less than a truckload.Failure by the Purchaser to make any claimagainst Teknion Wood within such period shallconstitute acceptance of the goods and awaiver of any apparent defects errors orshortages.
Returns
No returns of goods will be accepted withoutTeknion Wood’s written consent and shippinginstruction to Teknion Wood. If Teknion Woodapproves the return of standard Teknion Wood
product Purchaser must request a ReturnGoods Authorization (RGA) from TeknionWood. All such returns must be shipped freightprepaid unless otherwise indicated by TeknionWood and standard items are subject to arestocking charge equal to 50% of the invoiceprice. Special products are the property ofPurchaser and cannot be returned.
Warranties
Teknion Wood warrants its products to be freefrom defects in material and workmanship forthe lifetime of the product from date of initialdelivery (including parts and labor). Exceptionsto the lifetime warranty involve fabrics woodfinishes acrylics moving parts electrical itemsand special items. Please see Warranty forterms.
Limitation of Remedy
Purchaser’s sole and exclusive remedy(excluding the repair or replacement of goodsfor breach of the express warranty above) forany matter or claim arising under or relatingto these terms and conditions the goodscovered hereby and any transaction involvingor relating to such goods whether in contracttort (including negligence) or otherwise shall
be general money damages not in excess
of the lesser of the actual direct damage toPurchaser or the purchase price for the
goods to which the claim relates. In no eventshall Teknion Wood be liable for any specialindirect consequential or incidental damagesincluding without limitation damages for lossof business profits business interruptions or lossof information even if Teknion Wood has beenadvised of the possibility of such damages.
E. and O.E.
TAll quotations acknowledgements andinvoices are subject to corrections for any errorsand omissions.
general information
foundations – casegoods & conferencing – June 19, 2017
Standard Grommet for Foundations Tops is GM5K (Tungsten).Grommets and locations must be specified.
OPTIONAL GROMMET LOCATIONS FOR DESKS, CREDENZAS AND RETURNS
Note: Arrow indicates direction of grain.
TL - Top LeftTR - Top RightTCL - Top Centre LeftTCR - Top LeftTC - Top Centre
series details
For Tops up to 24" Deep
For Tops from 30" to 36" Deep
Up to 84"
Up to 66"
Up to 66"
Up to 84"
13" 13"
13"13"
13" 13"
13" 13"
22.83" 22.83"
C/L
C/L
C/L
C/L 22.83"22.83"
TL
TL
TCL TC
TC
TCR TR
TL TCL TC TCR TR
TR
TL TC TR
4.5"
4.5"
7.87"
7.87"
general information
foundations – casegoods & conferencing – June 19, 2017
Grommets and Grommet Locations must be specified.
OPTIONAL GROMMET LOCATIONS ON WORK WALLS
series details
Standard Grommet Locations on Work Walls
4.13"
5.12"
FW11056
Back Grommet
Back Grommet
FW9570-IR Back View
Cut Out for WireManagement
GM1 - Standard Grommeton Display Wall
2 x GM17 - StandardGrommet on FC Credenza
GM17 - Standard Grommeton FCD Credenza
5.12"
4.13"
3.15"
7.87"
GM5
BTC003
TL-Top Left TR-Top Right
TLP-Top Left TRP-Top Right
general information
foundations – casegoods & conferencing – June 19, 2017
Available widths 15", 30", 45", 60" wide.Available heights 14", 28", 42" high.Maximum niche dimension 60" wide is 42" high.Maximum niche dimension 75" wide is 28" high.
WORK WALL DISPLAY NICHES
series details
When a niche is placed on 20" cantilevered storage there is no bottom When a niche is placed between storage components it always has a bottom
Four sided niche with routed upper panel for LED light. Niche is routed on inside top panel & back is drilled for wire pass through.
Open bottom niche with routed upper panel for LED light. LED lights available in 12", 24", 36" and 48” widths.
LED lights for niches must be specified at time of manufacture. When more than one LED light is required in a work wall configuration, a single remote switch is included. Up to four LED lights canwork off a single transformer.
WORK WALL LIGHTING
general information
foundations – casegoods & conferencing – June 19, 2017
Grommets and Grommet Locations must be specified.
OPTIONAL GROMMET LOCATIONS FOR CONFERENCE TABLE TOPS
series details
For tables that are 48" wide and 96", 120", 144" or 168" long
For tables that are 48" wide and 192" or 216" long and tables that are 60" wide and 168", 192", 216" or 240' long
TCL - Top Centre LeftTCR - Top LeftTC - Top Centre
TCL1
30"
26"
12"
Platform BaseColumn
Floor Monument Cut-Out3.5" Diameter
Table End
TCL2 TCL3 TCR1 TCR2 TCR3
TCL TC TCR
general information
foundations – casegoods & conferencing – June 19, 2017
Conference Table, two-piece Top with 3 Bases
CONFERENCE TABLE TOP AND BASE GUIDE
series details
Conference Table, two-piece Top with 3 Bases Sectional Conference Table with 3 Bases
Conference Table, two-piece Top with 2 Bases Sectional Conference Table with 2 Bases
Conference Table, one-piece Top with 2 Bases Square Table Top with Mono Base
Sectional Conference Table with Technology Trough and 3 Bases
Sectional Conference Table with Technology Trough and 2 Bases
Sectional Conference Table with Technology Trough and 2 Bases
Round Table Top with Mono Base
Note: Different Table Shapes are available (Section “L”).
general information
foundations – casegoods & conferencing – June 19, 2017
TECHNOLOGY TROUGH DETAILS
series details
Doors are removed to show the inside of the Technology Trough
Closed doors
End ViewSide View End View
Power Receptacles
Telcom Knockouts
End View Detail
Power kits are included. For telcom platesplease refer to Accessories page. Two powerreceptacles and two telcom knockouts per doorare standard. Telcom plates will be shippedseparately. If no telcom plate is specified, blankcoverplate will be included
Open doors (up to 90°)
“E”End Base Feed
“C”Center Base Feed
“E”End Base Feed
Doors are opened withtouch latch to access the
Power/Data platesopens upto 90°
general information
foundations – casegoods & conferencing – June 19, 2017
finishes
STANDARD FLINTWOOD: Blonde Maple VZDFlax FXDNatural Pecan FNDSycamore VADMedium Sycamore FMDChianti FCDDark Walnut FDDBlack Walnut VBDSierra Flint NRDCocoa Brown Flint NTDWhite Oak 5NDPoppy Seed 5PDHarvest Cherry 5QDEarl Grey 5RDSilverwash 5SDWhite Truffle 5TDCaraway 5VD
NOTE: A 10% upcharge will be applied to the following Flintwood Colors:Drift Oak 5WClassic Walnut 5ZRaw Umber 5UDark Henna 5XBlack Timber 5YWalnut VT
• Custom staining service is available. Cost to match finish is:• Orders for $0 to $200,000 list, add 15% to the base pricing for each product.• Order for over $200,000 will not have an upcharge.• Plastic laminate inlay is available. Surcharges may apply, must be quoted as a special.• GreenGuard and FSC available. Surcharges may apply. Quote is required.
FINISHES : FINISH CODE FINISH CODE COLOR
FINISH FOR METAL LEGS (CASEGOODS)
FINISH OPTIONS
BLKT . . . . . . . . . . . . . . . . . . . . . . . .Black TexturedTUNT . . . . . . . . . . . . . . . . . . . . . . .Tungsten TexturedDWTT . . . . . . . . . . . . . . . . . . . . . . .Designer White TexturedSGRT . . . . . . . . . . . . . . . . . . . . . . .Silver Glimmer TexturedIGRT . . . . . . . . . . . . . . . . . . . . . . . .Iron Glimmer Textured
FINISH CODE COLOR
FINISH FOR METAL LEGS (CONFERENCE)
SGR . . . . . . . . . . . . . . . . . . . . . . . .Silver Glimmer
general information
foundations – casegoods & conferencing – June 19, 2017
EDGES AND HANDLES AVAILABLE
finishes
Edge DetailFoundations Casegoods
Edge DetailFoundations Conference Tables Foundations Handle
1 1/
2"
2 1/2"
1 3/
8"
2"PL83 Anodized Aluminum, 7.2"
3/4"
3/4"
general information
foundations – casegoods & conferencing – June 19, 2017
DOUBLE AND SINGLE PEDESTAL DESKS
finishes
For desks two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
User Side
For Transaction Counter and Decorative Panel only one finish can be specified.
Back View
User Side Back View
#1
#1
#1
#1
#1
#1
#1#1
#1
#1
#2
#2
#2
#2
TRANSACTION COUNTER AND DECORATIVE PANEL
general information
foundations – casegoods & conferencing – June 19, 2017
MODULAR PEDESTALS
finishes
For Modular Pedestals two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
User Side Back View
User Side Back View
For Lateral Files two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
#1
#1
#1
#1
#2
#2
#2
#2
#2
LATERAL FILES
general information
finishes
foundations – casegoods & conferencing – June 19, 2017
MOBILE PEDESTALS
For Mobile Pedestals two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
User Side Back View
User Side Back View
BENCHESFor Benches two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
#1
#1
#1
#1
#2
#2
#2
#2
general information
finishes
foundations – casegoods & conferencing – June 19, 2017
CREDENZAS
For Credenzas two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
User Side
MODULAR TOPSFor Modular Tops only one finish can be specified.
Back View
Isometric View End View
#1
#1
#1
#2
#2
#2
#2
general information
finishes
foundations – casegoods & conferencing – June 19, 2017
For Wall Mounted Overheads two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
User Side
WORK WALL CREDENZASFor Work Wall Credenzas two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Back View
User Side Back View
WALL MOUNTED OVERHEADS
#2
#1
#2
#2
#2
#1#2
#1#1
#1
#2
general information
finishes
foundations – casegoods & conferencing – June 19, 2017
WORK WALLS
For Work Walls three finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.The third finish in the product string indicated as #3.If only one finish is indicated, the entire unit will be monotone.
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
Front View Side View
Isometric View
#2
#1 #1 #1 #1 #1
#1
#1
#1#1
#1
#1
#1#1
#1
#1
#2
#2#2
#2
#2
#2
#2
#2
#2#2
#3
#3
#3
#2
#2
#2
#2
#2
#2
#3
finishesgeneral information
foundations – casegoods & conferencing – June 19, 2017
For Sectional Tops two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire Table will be monotone.
SECTIONAL TOP WITH TWO BASES
Top View
Top View
SECTIONAL TOP WITH TECHNOLOGY TROUGH AND BASESFor Sectional Tops with Technology Troughs three finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.The third finish in the product string indicated as #3.If only one finish is indicated, the entire Table will be monotone.
Side View End View
Side View End View
#2 #1#1
#1 #1
#1
#1#1
#1
#1#2
#2#3#3
#2
End View
End View
#2
#1
general information
foundations – casegoods & conferencing – June 19, 2017
finishesFULL STORAGE CREDENZA WITH TWO SETS OF STORAGE CABINETS AND DISPLAY WALL
For Storage Credenzas two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Front View Side View Top View
Front View Side View Top View
FULL STORAGE CREDENZA WITH BBB, STORAGE CABINET, BBB AND DISPLAY WALLFor Storage Credenzas two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
#2
#2
#2
#2
#1 #1
#1#1#1#1
#1 #1
#1#1#1#1
general information
finishes
foundations – casegoods & conferencing – June 19, 2017
FULL STORAGE CREDENZA WITH BB, STORAGE CABINET, BB AND DISPLAY WALL
Front View Side View Top View
Front View Side View Top View
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
FLEC-36 Lecturn
Front View Side View Top ViewFLEC-24 Lecturn
#2
#2
#2
#2#2
#2
#1#1
#1 #1 #1 #1
#1 #1 #1 #1
#1#1
#1
LECTURNFor Lecturn two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
For Storage Credenzas two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
general information
finishes
foundations – casegoods & conferencing – June 19, 2017
MOBILE UNITS
For Sectional Tops two finishes can be specified.The first finish in the product string, indicated as #1.The second finish in the product string indicated as #2.If only one finish is indicated, the entire unit will be monotone.
Front View
Mobile Lecturn
Mobile Tech Cart
Side View Top View
Front View Side View Top View
Mobile ServerFront View Side View Top View
Note:Horizontal grain direction is standard on all engineered finishes.If natural veneer is required the grain direction will be vertical.Arrow indicates direction of grain.
#2 #2
#2
#2#2
#2
#1#1
#1#1
#1 #1 #1 #1
general information
foundations – casegoods & conferencing – June 19, 2017
key alike form
DATE PAGE(S)
CUSTOMER PO#
SPECIAL INTRUCTIONS
INITIATED BY ADD ON ORIGINAL PO#
ACK.NO. (PROVIDED BY DESCOR)
KEY NO. TAG AREA QUANTITY DESCOR USE ONLYW401 to W500 Inclusive Key Area Total Checked Total
Quantity Print Initials
of
Note: If Key Alike Instructions are not Submitted to DESCOR INDUSTRIES with the Customer’s Purchase Order, all components will be keyed randomly.
general information
typicals
foundations – casegoods & conferencing – June 19, 2017
CASEGOODS F-01
CASEGOODS F-02
CASEGOODS F-04
1 FSL7830B Single Pedestal Desk with Box/File Pedestal flush on Left 40811 FCMP54W Hanging Wood Modesty Panel 8261 FBT4820CG Bridge Top 9881 FCC40R7820H Single Pedestal Credenza with 40" Lat.Box/File flush on Right 4292
TOTAL $10187
QTY CODE DESCRIPTION PRICE
1 FD7236BBOS Double Pedestal Desk with Box/File Pedestal offset on Left and Right 60871 FCMP50W Hanging Wood Modesty Panel 8181 FCC7420HH Credenza with Lat.Box/File on Left and Right 4266
TOTAL $11171
QTY CODE DESCRIPTION PRICE
1 FSL7230B Single Pedestal Desk with Box/File Pedestal flush on Left 39431 F6420TCG Modular Top, Cross Grain 8821 FCC7420OH Credenza with Open Storage on Left and Lat.Box/File flush on Right 37601 FCON20 Connection Bracket for Top 110
TOTAL $8695
QTY CODE DESCRIPTION PRICE
1 FW9026-2 90" wide x 26" high Work Wall 52741 F7230T Modular Top 12491 FLEG30 Frame Leg 5821 F20BMCU Mobile Box Box Pedestal with cushion 1548
TOTAL $8653
QTY CODE DESCRIPTION PRICE
CASEGOODS F-03
general information
typicals
foundations – casegoods & conferencing – June 19, 2017
CASEGOODS F-05
CASEGOODS F-06
CASEGOODS F-07
CASEGOODS F-08
1 FW1258420LT 125" wide x 84" high Work Wall with LED Light 19673 1 FD7836BB Double Pedestal Desk with Box/File Pedestal flush on Left and Right 60431 FGTT7812 Rectangular Transaction Counter with Decorative Panel 1890
TOTAL $27606
QTY CODE DESCRIPTION PRICE
1 FW12584-1RLT 125" wide x 84" high Work Wall with LED Light 177691 F7230T Modular Top 12491 F2030BR Box/File Pedestal handed Right (installed offset) 22481 FCC7420HH Credenza with Lat. Box/File on Left and Right 4266
TOTAL $25532
QTY CODE DESCRIPTION PRICE
1 FW11056-1RTBTL 110" wide x 56" high Work Wall with Tackboard and LED Light 110201 F7830T Modular Top with sub top 13641 FCMP48W Hanging Wood Modesty Panel 8141 FCC6420OH Credenza with Open Storage on Left and Lat. Box/File on Right 3308
TOTAL $16506
QTY CODE DESCRIPTION PRICE
1 FW10784L 107" wide x 84" high Open Knee Space Work Wall 129151 FBT6024CG/S Special Bridge Top 14161 FCMP5OW Hanging Wood Modesty Panel 8181 FSL7236BOS Single Pedestal Desk with Box/File Pedestal offset on Left 43941 FCMP60W/S Special Hanging Wood Modesty Panel 841
TOTAL $20384
QTY CODE DESCRIPTION PRICE
general information
typicals
foundations – casegoods & conferencing – June 19, 2017
CASEGOODS F-09
CONFERENCE F-01
CONFERENCE F-02
CONFERENCE F-03
1 FW11084OW2R 110" wide x 84" high Open Knee Space Work Wall 98401 FQRL9030B Special Executive Return 5228
TOTAL $15068
QTY CODE DESCRIPTION PRICE
1 FREST12048 Rectangular Shaped Sectional Conference Table 60701 FC7224GGTWH66 Full Storage Credenza with two sets of Storage Cabinets and Display Wall 55321 FLEC24 Lectern 33771 FSM4020 Mobile Server 2725
TOTAL $17704
QTY CODE DESCRIPTION PRICE
1 FRESTCT24060 Rectangular Shaped Sectional Conference Table with 8 doors 161011 FC9024GGTWH72 Full Storage Credenza with two sets of Storage Cabinets and Display Wall 66301 FLEC36 Lectern 4094
TOTAL $26825
QTY CODE DESCRIPTION PRICE
1 FRE5454 Square Table 32091 FFTWA72WH66 Full Storage Credenza with BB, Storage Cabinet, BB and Display Wall 58891 FCD7220A Full Storage Credenza with BBB on Left, Storage Cabinet and BBB on Right 39651 FBP7220 Credenza Back Panel 560
TOTAL $13623
QTY CODE DESCRIPTION PRICE
general information
typicals
foundations – casegoods & conferencing – June 19, 2017
CONFERENCE F-04
CONFERENCE F-05
CONFERENCE F-05
1 FREBEST14448 Rectangular Shaped Sectional Conference Table with Bow Ends 65691 FSM4020 Mobile Server 27251 FLEC24 Lectern 3377
TOTAL $12672
QTY CODE DESCRIPTION PRICE
1 FBOST16848 Boat Shaped Sectional Conference Table 72271 FCD8420A Full Storage Credenza with BBB on Left, Storage Cabinet and BBB on Right 43631 FLEC24M Mobile Lectern 25021 FTCM2020H36 Mobile Tech Cart 1703
TOTAL $15795
QTY CODE DESCRIPTION PRICE
1 FWESTCT1926048 Wedge Shaped Sectional Conference Table with 8 doors 140851 FCD9024ATWH72 Full Storage Credenza with BBB, Storage Cabinet, BBB and Display Wall 66301 FLEC36 Lectern 40941 FC9020GG Full Storage Credenza with two sets of Storage Cabinets 4277
TOTAL $29086
QTY CODE DESCRIPTION PRICE
price guide
CASEGOODS DESKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
CASEGOODS S INGLE PEDESTAL CREDENZAS . . . . . . . . . . . . . . . 48
CASEGOODS FULL STORAGE CREDENZAS . . . . . . . . . . . . . . . . . 52
CASEGOODS MODULAR STORAGE . . . . . . . . . . . . . . . . . . . . . . . 54
CASEGOODS FREESTANDING STORAGE . . . . . . . . . . . . . . . . . . . 57
CASEGOODS RETURNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
CASEGOODS BR IDGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
CASEGOODS WALL MOUNT STORAGE . . . . . . . . . . . . . . . . . . . . 63
CASEGOODS WORK WALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
CASEGOODS ROOM FURNITURE . . . . . . . . . . . . . . . . . . . . . . . . 80
CONFERENCE TABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
ACCESSOR IES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
foundations – casegoods & conferencing – June 19, 2017
price guide
foundations – casegoods & conferencing – June 19, 2017
casegoods desksCASEGOODS DESKS / TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Tops are constructed with two ¾" thick panels laminated together to create a total thickness of 1 ½"• All Pedestals are suspended 7.5" off the floor by an open framed Leg and can be installed flush or offset• Pedestals are handed- Left pedestals have the handle offset form the center to the right and the lock is placed on the right gable- Right pedestals have the handle offset form the center to the left and the lock is placed on the left gable• If a Modesty Panel is required please choose from Modesty Panel Options (Wood or Glass)• Grommets can be specified for Desk Tops
Double Pedestal Desk with Box/File installed flush. Double Pedestal Desk with Box/File installed offset.Add 20" to the overall width of the top.
Single Pedestal Desk with Box/File installed flush.
By adding a Transaction Counter Top with Decorative Front Panel (See Productcode FGTT) to a Desk, the Desk can be used as a Reception.
Single Pedestal Desk with Box/File installed offset.Add 10" to the overall width of the top.
User View Guest View
78"
20" 20"
20"20"
78" 88"
98"
price guide
foundations – casegoods & conferencing – June 19, 2017
Double Pedestal Desk with Box/File Pedestal flush on Left and Right
FD-BB
FD-BBOS
Double Pedestal Desk with Box/File Pedestal offset on Left and Right
PRODUCT PRICE MODESTY SIZE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FD8436BB 8012 FCMP42W or FCMP42G 28 84 36 201 15FD7836BB 7857 FCMP36W or FCMP36G 28 78 36 192 15FD7236BB 7661 FCMP30W or FCMP30G 28 72 36 177 15FD8430BB 7614 FCMP42W or FCMP42G 28 84 30 184 15FD7830BB 7489 FCMP36W or FCMP36G 28 78 30 176 15FD7230BB 7310 FCMP30W or FCMP30G 28 72 30 163 14
NOTE: See page 46 for modesty pricing. Spec as separate line item.
PRODUCT PRICE MODESTY SIZE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FD8436BBOS 8266 FCMP62W or FCMP62G 28 104 36 201 15FD7836BBOS 8110 FCMP56W or FCMP56G 28 98 36 192 15FD7236BBOS 7914 FCMP50W or FCMP50G 28 92 36 177 15FD8430BBOS 7867 FCMP62W or FCMP62G 28 104 30 184 15FD7830BBOS 7742 FCMP56W or FCMP56G 28 98 30 176 15FD7230BBOS 7563 FCMP50W or FCMP50G 28 92 30 163 14
NOTE: See page 46 for modesty pricing. Spec as separate line item.
casegoods desks (continued)
FSL-B
Single Pedestal Desk with Box/File Pedestal flush on Left
PRODUCT PRICE MODESTY SIZE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FSL8436B 5828 FCMP60W or FCMP60G 28 84 36 201 15FSL7836B 5672 FCMP54W or FCMP54G 28 78 36 192 15FSL7236B 5459 FCMP48W or FCMP48G 28 72 36 177 15FSL8430B 5430 FCMP60W or FCMP60G 28 84 30 184 15FSL7830B 5304 FCMP54W or FCMP54G 28 78 30 176 15FSL7230B 5126 FCMP48W or FCMP48G 28 72 30 163 14
NOTE: See page 46 for modesty pricing. Spec as separate line item.
price guide
foundations – casegoods & conferencing – June 19, 2017
FSL-BOS
Single Pedestal Desk with Box/File Pedestal offset on Left
PRODUCT PRICE MODESTY SIZE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
casegoods desks (continued)
FSL8436BOS 6081 FCMP70W OR FCMP70G 28 94 36 201 15FSL7836BOS 5926 FCMP64W OR FCMP64G 28 88 36 192 15FSL7236BOS 5712 FCMP58W OR FCMP58G 28 82 36 177 15FSL8430BOS 5684 FCMP70W OR FCMP70G 28 94 30 184 15FSL7830BOS 5558 FCMP64W OR FCMP64G 28 88 30 176 15FSL7230BOS 5379 FCMP58W OR FCMP58G 28 82 30 163 14
NOTE: See page 46 for modesty pricing. Spec as separate line item.
FSR-B
Single Pedestal Desk with Box/File Pedestal flush on Right
PRODUCT PRICE MODESTY SIZE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FSR8436B 5828 FCMP60W OR FCMP60G 28 84 36 201 15FSR7836B 5672 FCMP54W OR FCMP54G 28 78 36 192 15FSR7236B 5459 FCMP48W OR FCMP48G 28 72 36 177 15FSR8430B 5430 FCMP60W OR FCMP60G 28 84 30 184 15FSR7830B 5304 FCMP54W OR FCMP54G 28 78 30 176 15FSR7230B 5126 FCMP48W OR FCMP48G 28 72 30 163 14
NOTE: See page 46 for modesty pricing. Spec as separate line item.
FSR-BOS
Single Pedestal Desk with Box/File Pedestal offset on Right
PRODUCT PRICE MODESTY SIZE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FSR8436BOS 6081 FCMP70W OR FCMP70G 28 94 36 201 15FSR7836BOS 5926 FCMP64W OR FCMP64G 28 88 36 192 15FSR7236BOS 5712 FCMP58W OR FCMP58G 28 82 36 177 15FSR8430BOS 5684 FCMP70W OR FCMP70G 28 94 30 184 15FSR7830BOS 5558 FCMP64W OR FCMP64G 28 88 30 176 15FSR7230BOS 5379 FCMP58W OR FCMP58G 28 82 30 163 14
NOTE: See page 46 for modesty pricing. Spec as separate line item.
price guide
foundations – casegoods & conferencing – June 19, 2017
Desk Shell
FT
PRODUCT PRICE MODESTY SIZE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FT7236 3843 FCMP66W OR FCMP66G 28 72 36 94 7FT6636 3668 FCMP60W OR FCMP60G 28 66 36 79 7FT6036 3506 FCMP54W OR FCMP54G 28 60 36 73 7FT7230 3378 FCMP66W OR FCMP66G 28 72 30 79 6FT6630 3243 FCMP60W OR FCMP60G 28 66 30 74 6FT6030 3112 FCMP54W OR FCMP54G 28 60 30 68 6
NOTE: See page 46 for modesty pricing. Spec as separate line item.
casegoods desks (continued)
Rectangular Transaction Counter with Decorative Panel
FGTT
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FGTT8412 2564 42 84 12 73 21FGTT7812 2457 42 78 12 68 19FGTT7212 2296 42 72 12 63 18
Hanging Wood Modesty Panel
FCMP-W
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCMP70W 1147 18 70 0.75 25 1FCMP64W 1110 18 64 0.75 23 1FCMP62W 1098 18 62 0.75 22 1FCMP60W 1093 18 60 0.75 22 1FCMP58W 1084 18 58 0.75 21 1FCMP56W 1078 18 56 0.75 20 1FCMP54W 1074 18 54 0.75 20 1FCMP50W 1063 18 50 0.75 18 1FCMP48W 1058 18 48 0.75 18 1FCMP42W 987 18 42 0.75 16 1FCMP36W 848 18 36 0.75 14 1FCMP30W 707 18 30 0.75 12 1
price guide
foundations – casegoods & conferencing – June 19, 2017
FCMP-G
Hanging Glass Modesty Panel
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCMP70G 1847 18 70 0.75 20 1FCMP64G 1746 18 64 0.75 18 1FCMP62G 1648 18 62 0.75 17 1FCMP60G 1595 18 60 0.75 16 1FCMP58G 1554 18 58 0.75 15 1FCMP56G 1541 18 56 0.75 15 1FCMP54G 1486 18 54 0.75 14 1FCMP50G 1446 18 50 0.75 13 1FCMP48G 1420 18 48 0.75 13 1FCMP42G 1406 18 42 0.75 12 1FCMP36G 1393 18 36 0.75 11 1FCMP30G 1380 18 30 0.75 10 1
• ALUMINUM FRAMED GLASS MODESTY PANEL WITH FROSTED GLASS IS STANDARD• FOR WHITE BACK PAINTED GLASS, PLEASE CONTACT CUSTOMER SERVICE FOR PRICING
casegoods desks (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
casegoods single pedestal credenzasCASEGOODS SINGLE PEDESTAL CREDENZAS • TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Tops are constructed with two ¾" thick panels laminated together to create a total thickness of 1 ½"• All Pedestals are suspended 7.5" off the floor by an open framed Leg and can be installed flush or offset• Pedestals are handed:- Left Pedestals have the handle offset form the center to the right and the lock is placed on the left gable- Right Pedestals have the handle offset form the center to the left and the lock is placed on the right gable• Grommets can be specified on Credenza Tops
Single Pedestal Credenza with 35" Lateral Box/File installed flush Single Pedestal Credenza with 35" Lateral Box/File installedoffset Adds 10" to overall width
Single Pedestal Credenza with 40" Lateral Box/File installed flush. Double Pedestal Credenza with 40" Lateral Box/File installedoffset. Adds 10" to overall width
NOTE: Arrow indicates direction of grain.
78"
78"
88"
88"
40"40"
35" 35"
FCCL-B
FCCL-BOS
FCCR-B
FCCR-BOS
Single Pedestal Credenza with Box/File Pedestal flush on Left
Single Pedestal Credenza with Box/File Pedestal offset on Left
Single Pedestal Credenza with Box/File Pedestal flush on Right
Single Pedestal Credenza with Box/File Pedestal offset on Right
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCCL7824B 5262 28 78 24 160 12FCCL7224B 5093 28 72 24 151 12FCCL7820B 4941 28 78 20 153 11FCCL7220B 4785 28 72 20 144 11
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCCL7824BOS 5295 28 88 24 160 12FCCL7224BOS 5093 28 82 24 151 12FCCL7820BOS 4974 28 88 20 153 11FCCL7220BOS 4785 28 82 20 144 11
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCCR7824B 5262 28 78 24 160 12FCCR7224B 5093 28 72 24 151 12FCCR7820B 4941 28 78 20 153 11FCCR7220B 4785 28 72 20 144 11
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCCR7824BOS 5295 28 88 24 160 12FCCR7224BOS 5093 28 82 24 151 12FCCR7820BOS 4974 28 88 20 153 11FCCR7220BOS 4785 28 82 20 144 11
price guide
casegoods single pedestal credenzas (continued)
foundations – casegoods & conferencing – June 19, 2017
FCCL-B •
FCCL-BOS •
FCCR-B •
Single Pedestal Credenza with 35" Lateral Box/File flush on Left
FCC35L-H
FCC35R-H
FCC35R-HOS
FCC35L-HOS
Single Pedestal Credenza with 35" Lateral Box/File offset on Left
Single Pedestal Credenza with 35" Lateral Box/File flush on Right
Single Pedestal Credenza with 35" Lateral Box/File offset on Right
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC35L7824H 5675 28 78 24 188 18FCC35L7224H 5506 28 72 24 179 18FCC35L7820H 5326 28 78 20 179 15FCC35L7220H 5169 28 72 20 170 15
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC35L7824HOS 5903 28 88 24 188 18FCC35L7224HOS 5734 28 82 24 179 18FCC35L7820HOS 5553 28 88 20 179 15FCC35L7220HOS 5397 28 82 20 170 15
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC35R7824H 5675 28 78 24 188 18FCC35R7224H 5506 28 72 24 179 18FCC35R7820H 5326 28 78 20 179 15FCC35R7220H 5169 28 72 20 170 15
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC35R7824HOS 5903 28 88 24 188 18FCC35R7224HOS 5734 28 82 24 179 18FCC35R7820HOS 5553 28 88 20 179 15FCC35R7220HOS 5397 28 82 20 170 15
price guide
casegoods single pedestal credenzas (continued)
foundations – casegoods & conferencing – June 19, 2017
FCC40L-H
FCC40L-HOS
FCC40R-H
FCC40R-HOS
Single Pedestal Credenza with 40" Lateral Box/File flush on Left
Single Pedestal Credenza with 40" Lateral Box/File offset on Left
Single Pedestal Credenza with 40" Lateral Box/File flush on Right
Single Pedestal Credenza with 40" Lateral File Box/File offset on Right
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC40L7824H 5873 28 78 24 198 20FCC40L7224H 5704 28 72 24 189 20FCC40L7820H 5579 28 78 20 188 17FCC40L7220H 5422 28 72 20 179 17
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC40L7824HOS 6102 28 88 24 198 20FCC40L7224HOS 5933 28 82 24 189 20FCC40L7820HOS 5807 28 88 20 188 17FCC40L7220HOS 5650 28 82 20 179 17
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC40R7824H 5873 28 78 24 198 20FCC40R7224H 5704 28 72 24 189 20FCC40R7820H 5579 28 78 20 188 17FCC40R7220H 5422 28 72 20 179 17
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC40R7824HOS 6102 28 88 24 198 20FCC40R7224HOS 5933 28 82 24 189 20FCC40R7820HOS 5807 28 88 20 188 17FCC40R7220HOS 5650 28 82 20 179 17
price guide
casegoods single pedestal credenzas (continued)
foundations – casegoods & conferencing – June 19, 2017
price guide
foundations – casegoods & conferencing – June 19, 2017
casegoods full storage credenzasCASEGOODS FULL STORAGE CREDENZAS • TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Tops are ¾" thick with flat edge• All Pedestals are suspended 7.5" off the floor by an open framed Leg and can be installed flush or offset• Handles are standard on all drawer fronts• Doors will open with touch latch• Units placed on the Left have handles offset from center to the left and the lock is placed on left side panel• Units placed on the Right have handles offset from center to the right and the lock is placed on right side panel• Doors will open with touch latch• You may customize a credenza with more than two units arranged together, but Note that the middlesection will not lock
NOTE: Arrow indicates direction of grain.
Credenza with Lateral Box/File on Left and Open Storage on Right
FCC-HO
FCC-OH
Credenza with Open Storage on Left and Lateral Box/File on Right
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC7424HO 5130 26.75 74.5 24 203 29FCC6424HO 4522 26.75 64.5 24 186 25FCC7420HO 4887 26.75 74.5 20 187 24FCC6420HO 4300 26.75 64.5 20 171 21
• HANDLE AND LOCK ON LEFT
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC7424OH 5130 26.75 74.5 24 203 29FCC6424OH 4522 26.75 64.5 24 186 25FCC7420OH 4887 26.75 74.5 20 187 24FCC6420OH 4300 26.75 64.5 20 171 21
• HANDLE AND LOCK ON RIGHT
FCC-HO • FCC-OH •
FCC-HH
FCC-XX
FCC-X
Credenza with Lateral Box/File on Left and Right
Credenza with 4 Doors and Adjustable Shelves
Credenza with 2 Doors and Adjustable Shelves
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC7424HH 5823 26.75 74.5 24 265 29FCC6424HH 5100 26.75 64.5 24 238 25FCC7420HH 5546 26.75 74.5 20 251 24FCC6420HH 4860 26.75 64.5 20 226 21
• HANDLE AND LOCK ON LEFT AND RIGHT
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC7424GG 5095 26.75 74.5 24 171 29FCC6424MM 4618 26.75 64.5 24 152 25FCC7420GG 4681 26.75 74.5 20 153 24FCC6420MM 4246 26.75 64.5 20 136 21
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCC3624G 3185 26.75 36 24 86 15FCC3024M 2655 26.75 30 24 76 13FCC3620G 2846 26.75 36 20 77 12FCC3020M 2372 26.75 30 20 68 11
price guide
casegoods full storage credenzas (continued)
foundations – casegoods & conferencing – June 19, 2017
FCC-HH •
FCC-XX •
FCC-X •
price guide
foundations – casegoods & conferencing – June 19, 2017
casegoods modular storage
CASEGOODS MODULAR STORAGE • TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Tops are ¾" thick with flat edge• All Pedestals are suspended 7.5" off the floor by an open framed Leg and can be installed flush or offset• Handles are standard on all drawer fronts• Doors will open with touch latch• Units placed on the Left have handles offset from center to the left and the lock is placed on left side panel• Units placed on the Right have handles offset from center to the right and the lock is placed on right side panel• Doors will open with touch latch• You may customize a credenza with more than two units arranged together, but Note that the middlesection will not lock
NOTE: Arrow indicates direction of grain.
Box/File Pedestal handed Left
F-BL
F-BR
Box/File Pedestal handed Right
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
F2036BL 3068 26.75 20.5 36 F2030BL 2922 26.75 20.5 30 90 10F2024BL 2753 26.75 20.5 24 83 8F2020BL 2620 26.75 20.5 20 78 7
• USED ON DESKS AND CREDENZAS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
F2036BR 3068 26.75 20.5 36 F2030BR 2922 26.75 20.5 30 90 10F2024BR 2753 26.75 20.5 24 83 8F2020BR 2620 26.75 20.5 20 78 7
• USED ON DESKS AND CREDENZAS
F-BL •
F-BR •
F-HL
F-HR
FLEG
FCON
Lateral Box/File Pedestal handed Left
Lateral Box/File Pedestal handed Right
Frame Leg
Top Connecting Bracket
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
F4024HL 3606 26.75 40 24 121 16F3524HL 3407 26.75 35 24 111 14F4020HL 3496 26.75 40 20 113 13F3520HL 3243 26.75 35 20 104 11
• USED ON CREDENZAS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
F4024HR 3606 26.75 40 24 121 16F3524HR 3407 26.75 35 24 111 14F4020HR 3496 26.75 40 20 113 13F3520HR 3243 26.75 35 20 104 11
• USED ON CREDENZAS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FLEG36 826 27.5 36 2.5 6 3FLEG30 756 27.5 30 2.5 6 3FLEG24 700 27.5 24 2.5 5 2FLEG20 641 27.5 20 2.5 5 2
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCON36 172 0.75 10 31 4 1FCON30 160 0.75 10 25 4 1FCON24 156 0.75 10 19 3 1FCON20 142 0.75 10 15 3 1
price guide
casegoods modular storage (continued)
foundations – casegoods & conferencing – June 19, 2017
F-HL • Lat.
F-HR • Lat.
FLEG • Frame
FCON • Top
price guide
foundations – casegoods & conferencing – June 19, 2017
Modular Top
F-T
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
F8436T 2272 1.5 84 36 95 3F7836T 2116 1.5 78 36 88 3F7236T 1951 1.5 72 36 82 3F8430T 1901 1.5 84 30 80 3F7830T 1773 1.5 78 30 73 3F7230T 1625 1.5 72 30 67 2F6630T 1502 1.5 66 30 62 2F6030T 1369 1.5 60 30 56 2F5430T 1238 1.5 54 30 51 2F8424T 1688 1.5 84 24 67 2F7824T 1569 1.5 78 24 62 2F7424T 1488 1.5 74 24 58 2F7224T 1400 1.5 72 24 53 2F6624T 1347 1.5 66 24 51 2F6424T 1263 1.5 64 24 49 2F6024T 1180 1.5 60 24 47 2F5424T 1096 1.5 54 24 42 2F4824T 1012 1.5 48 24 38 1F4224T 885 1.5 42 24 34 1F8420T 1556 1.5 84 20 64 2F7820T 1443 1.5 78 20 60 2F7420T 1369 1.5 74 20 56 2F7220T 1286 1.5 72 20 51 2F6620T 1246 1.5 66 20 49 2F6420T 1176 1.5 64 20 47 2F6020T 1092 1.5 60 20 45 2F5420T 1008 1.5 54 20 40 1F4820T 928 1.5 48 20 36 1F4220T 812 1.5 42 20 31 1
• 3/4" TOP WITH FLAT EDGE• 3/4" SUB TOP INSET 2 1/2" ALL AROUND• FOR CROSS GRAIN VENEER PATTERN ADD “CG” TO THE END OF THE PRODUCT CODE• WHEN CONNECTING TWO TOPS TOGETHER A CONNECTING BRACKET MUST BE SPECIFIED. USE THE WIDTH OF THE SMALLEST TOP TO DETERMINETHE CORRECT BRACKET SIZE (E.G. FOR A 20" DEEP TOP ORDER FCON20)
• IF OPTIONAL GROMMET IS REQUIRED REFER TO SERIES DETAILS PAGE FOR GROMMET LOCATION
casegoods modular storage (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
casegoods freestanding storageCASEGOODS FREESTANDING STORAGE • TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• All Pedestals are suspended 7.5" off the floor by an open framed Leg and can be installed flush or offset• Left Pedestals have the handle offset form the center to the right and the lock is placed on the right gable• Right Pedestals have the handle offset form the center to the left and the lock is placed on the left gable• Bench drawers do not come with a handle. They open by pulling the bottom edge of the drawer• Cushions will be field installed. On double width benches the cushion can either be installed left or right• On Mobile Pedestals the lock will be placed on the right gable
NOTE: Arrow indicates direction of grain.
Left Freestanding 2H Lateral File Pedestal
FN-L
FN-R
Right Freestanding 2H Lateral File Pedestal
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FN3524L 3741 32 35 24 152 17FN3520L 3562 32 35 20 144 15
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FN3524R 3741 32 35 24 152 17FN3520R 3562 32 35 20 144 15
FN-L • Left Freestanding
FN-R • Right Freestanding
FN-3L
Left Freestanding 3H Lateral File Pedestal
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FN35243L 4764 44.5 35 24 220 22FN35203L 4553 44.5 35 20 212 19
FN-3L • Left Freestanding
price guide
foundations – casegoods & conferencing – June 19, 2017
Right Freestanding 3H Lateral File Pedestal
FN-3R
FBENK
F-BMCU
FBENKK
Bench with two File Drawers and Cushion
Bench with one File Drawer and Cushion
Mobile Box/Box Pedestal with cushion
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FN35243R 4764 44.5 35 24 220 22FN35203R 4553 44.5 35 20 212 19
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBENKK6420 4083 21 64.5 20 167 17
• NOTE: SEATING FABRIC GRADE 4 IS STANDARD PLEASE VISIT: WWW.GLOBALCONTRACT.COMFIND YOUR FABRIC SELECTION UNDER RESOURCES - FABRICS & FINISHES
• LOCK ON LEFT AND RIGHT
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBENK3520 2963 21 35 20 99 9
• NOTE: SEATING FABRIC GRADE 4 IS STANDARDPLEASE VISIT: WWW.GLOBALCONTRACT.COMFIND YOUR FABRIC SELECTION UNDER RESOURCES - FABRICS & FINISHES
• LOCK ON RIGHT
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
F20BMCU 2012 20.5 20.5 20 87 5
• NOTE: SEATING FABRIC GRADE 4 IS STANDARDPLEASE VISIT: WWW.GLOBALCONTRACT.COMFIND YOUR FABRIC SELECTION UNDER RESOURCES - FABRICS & FINISHES
• LOCK ON RIGHT• CASTERS ARE LOCKING
casegoods freestanding storage (continued)
FN-3R • Right Freestanding
FBENKK •
FBENK •
price guide
foundations – casegoods & conferencing – June 19, 2017
casegoods returnsCASEGOODS RETURNS • TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Tops are constructed with two ¾” thick panels laminated together to create a total thickness of 1 ½"• Returns can be connected to Wall Credenzas and Single Pedestal Desks• All Pedestals are suspended 7.5" off the floor by an open framed Leg and can be installed flush or offset• Pedestals are handed:- Left Pedestals have the handle offset form the center to the right and the lock is placed on the left gable- Right Pedestals have the handle offset form the center to the left and the lock is placed on the right gable• To Remove Cross Grain veneer pattern on Top, delete suffix “CG” from the Product Number Code (Availableat no upcharge)
• One Connecting Bracket is included
NOTE: Arrow indicates direction of grain.
Left Executive Return
FERL-CG
FERR-CG
Right Executive Return
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FERL6624CG 2522 28 66 24 59 4FERL6024CG 2350 28 60 24 55 4FERL5424CG 2221 28 54 24 50 4FERL4824CG 2132 28 48 24 46 3FERL4224CG 1755 28 42 24 42 3FERL6620CG 2292 28 66 20 57 4FERL6020CG 2137 28 60 20 53 4FERL5420CG 2019 28 54 20 48 3FERL4820CG 1939 28 48 20 44 3FERL4220CG 1595 28 42 20 39 3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FERR6624CG 2522 28 66 24 59 4FERR6024CG 2350 28 60 24 55 4FERR5424CG 2221 28 54 24 50 4FERR4824CG 2132 28 48 24 46 3FERR4224CG 1755 28 42 24 42 3FERR6620CG 2292 28 66 20 57 4FERR6020CG 2137 28 60 20 53 4FERR5420CG 2019 28 54 20 48 3FERR4820CG 1939 28 48 20 44 3FERR4220CG 1595 28 42 20 39 3
FERL-CG • Left
FERR-CG • Right
price guide
foundations – casegoods & conferencing – June 19, 2017
Left Executive Return with Box File Pedestal flush
FERL-BCG
FERL-BOSCG
FERR-BCG
Left Executive Return with Box File Pedestal offset
Right Executive Return with Box File Pedestal flush
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FERL6624BCG 4208 28 66 24 137 10FERL6024BCG 4046 28 60 24 133 10FERL5424BCG 3958 28 54 24 128 10FERL4824BCG 3873 28 48 24 124 9FERL4224BCG 3753 28 42 24 120 9FERL6620BCG 4008 28 66 20 130 9FERL6020BCG 3854 28 60 20 126 9FERL5420BCG 3770 28 54 20 121 8FERL4820BCG 3690 28 48 20 117 8FERL4220BCG 3574 28 42 20 112 8
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FERL6624BOSCG 4660 28 76 24 137 10FERL6024BOSCG 4046 28 70 24 133 10FERL5424BOSCG 3958 28 64 24 128 10FERL4824BOSCG 3873 28 58 24 124 9FERL4224BOSCG 3753 28 52 24 120 9FERL6620BOSCG 4236 28 76 20 130 9FERL6020BOSCG 3854 28 70 20 126 9FERL5420BOSCG 3770 28 64 20 121 8FERL4820BOSCG 3690 28 58 20 117 8FERL4220BOSCG 3574 28 52 20 112 8
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FERR6624BCG 4208 28 66 24 137 10FERR6024BCG 4046 28 60 24 133 10FERR5424BCG 3958 28 54 24 128 10FERR4824BCG 3873 28 48 24 124 9FERR4224BCG 3753 28 42 24 120 9FERR6620BCG 4008 28 66 20 130 9FERR6020BCG 3854 28 60 20 126 9FERR5420BCG 3770 28 54 20 121 8FERR4820BCG 3690 28 48 20 117 8FERR4220BCG 3574 28 42 20 112 8
casegoods returns (continued)
FERL-BCG • Left
price guide
foundations – casegoods & conferencing – June 19, 2017
FERR-BOSCG
Right Executive Return with Box File Pedestal offset
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FERR6624BOSCG 4660 28 76 24 137 10FERR6024BOSCG 4046 28 70 24 133 10FERR5424BOSCG 3958 28 64 24 128 10FERR4824BOSCG 3873 28 58 24 124 9FERR4224BOSCG 3753 28 52 24 120 9FERR6620BOSCG 4236 28 76 20 130 9FERR6020BOSCG 3854 28 70 20 126 9FERR5420BOSCG 3770 28 64 20 121 8FERR4820BOSCG 3690 28 58 20 117 8FERR4220BOSCG 3574 28 52 20 112 8
casegoods returns (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
casegoods bridgesCASEGOODS BRIDGES • TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Tops are constructed with two ¾" thick panels laminated together to create a total thickness of 1 ½"• The standard grain direction on Bridge Tops is Cross Grain (CG)• To remove Cross Grain veneer pattern on Top, delete suffix “CG” from the product number code (Available at no upcharge)
• GM5K (Tungsten) TC Location is standard• Two Connecting Brackets are included
NOTE: Arrow indicates direction of grain.Bridge TopF4820TCG
Bridge Top
FBT-CG
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBT6624CG 2013 1.5 66 24 57 2FBT6024CG 1844 1.5 60 24 53 2FBT5424CG 1751 1.5 54 24 48 2FBT4824CG 1418 1.5 48 24 44 1FBT4224CG 1284 1.5 42 24 40 1FBT6620CG 1831 1.5 66 20 55 2FBT6020CG 1676 1.5 60 20 51 2FBT5420CG 1593 1.5 54 20 46 1FBT4820CG 1284 1.5 48 20 42 1FBT4220CG 1169 1.5 42 20 37 1
price guide
foundations – casegoods & conferencing – June 19, 2017
I.1
Tackboard
casegoods wall mount storage
I.1
Tackboard
FOUNDATIONS CASEGOODS • WALL MOUNT STORAGE
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Wall Mount Overheads have a 2" deep valance on top and bottom and it can accommodate LED or T5lighting in either location
• Tackboards are installed flush• Standard Heights for Tackboards are:- 19.2" (Overall Height above Worksurface = 36.5")- 26" (Overall Height above Worksurface = 42.5")
NOTE: Arrow indicates direction of grain.
Wall Mount Storage with Doors
FSF
FTS
Wall Mount Tackboard
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FSF74 2731 18.5 74.5 15 103 13FSF72 2621 18.5 72 15 101 12FSF66 2464 18.5 66 15 94 11FSF64 2412 18.5 64.5 15 92 11FSF60 2310 18.5 60 15 87 10FSF54 2202 18.5 54 15 80 9FSF48 2002 18.5 48 15 74 8
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FTS74H26 826 26 74.5 0.75 17 2FTS72H26 763 26 72 0.75 16 1FTS66H26 700 26 66 0.75 14 1FTS64H26 679 26 64.5 0.75 13 1FTS60H26 636 26 60 0.75 13 1FTS54H26 570 26 54 0.75 13 1FTS48H26 509 26 48 0.75 13 1FTS74 634 19.2 74.5 0.75 13 1FTS72 585 19.2 72 0.75 12 1FTS66 534 19.2 66 0.75 11 1FTS64 506 19.2 64.5 0.75 11 1FTS60 488 19.2 60 0.75 10 1FTS54 441 19.2 54 0.75 10 1FTS48 394 19.2 48 0.75 10 1
FSF •
FTS • 36.5" or 42.5"Tackboard 19.2" or 26"
price guide
foundations – casegoods & conferencing – June 19, 2017
casegoods work wallsCASEGOODS WORK WALLS • TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Tackboards and Tasklights must be specified• When the Tackboard option is specified, the price includes a Tackboard for each niche of the Work Wall• When the Task Light option is specified, the price includes LED Tasklight installed in the top of each niche. Ifmore than one niche is needed in the configuration, remote on/off switch is included for simultaneous operation
• All Storage Doors open with touch latch• Side Access to open storage or wardrobe - Front panels are fixed• Standard Heights are 26.5", 56", 70" and 84"• Walls are available in 15" increments starting at 95" (I.E. 110", 125" 140", 155")• Wall Credenzas are only available in 90" width• For available finish specification see Finishes page• Cantilevered Storage units are side locking• For modifications to the wall configurations, size or finish, please contact customer service
95" wide x 84" high Work Wall
FW9584-1L
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9584-1L 16790 84 95 20 634 79
95" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60"WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $977 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1028 TO THE LIST PRICE
FW9584-1L • 95” wide x 84” high Work Wall
95" wide x 84" high Work Wall
FW9584-1R
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9584-1R 16790 84 95 20 634 79
95" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, 60" WIDE WALL CREDENZA WITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDENICHE, 60" WIDE SINGLE HEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $977 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1028 TO THE LIST PRICE
FW9584-1R • 95” wide x 84” high Work Wall
95" wide x 84" high Work Wall
FW9584-2L
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9584-2L 15112 84 95 20
95" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60" WIDEDOUBLE HEIGHT NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
FW9584-2L • 95” wide x 84” high Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
FW9584-2R
FW11084-1L
FW11084-1R
FW11084-2L
95" wide x 84" high Work Wall
110" wide x 84" high Work Wall
110" wide x 84" high Work Wall
110" wide x 84" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9584-2R 15112 84 95 20 568 77
95" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, 60" WIDE WALL CREDENZA WITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDEDOUBLE HEIGHT NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $576 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $395 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11084-1L 19308 84 110 20 741 91
110” WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60” WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60”WIDE NICHE, TRIPLE HEIGHT STORAGE, 45” WIDE SINGLE HEIGHT STORAGE, 60” WIDE NICHE, 60” WIDE SINGLE HEIGHT STORAGE, TRIPLEHEIGHT STORAGE, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $977 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1028 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11084-1R 19308 84 110 20 741 91
110" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, TRIPLE HEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE,60" WIDE WALL CREDENZA WITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDE NICHE, 45" WIDE SINGLE HEIGHT STORAGE, TRIPLE HEIGHTSTORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $977 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1028 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11084-2L 16790 84 110 20 628 88
110" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60"WIDE DOUBLE HEIGHT NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, DOUBLE DEPTH WARDROBE WITH COAT ROD AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
casegoods work walls (continued)
FW9584-2R • 95” wide x 84” high Work Wall
FW11084-1L • 110” wide x 84” high Work Wall
FW11084-1R • 110” wide x 84” high Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
110" wide x 84" high Work Wall
FW11084-2R
FW12584-1R
FW14084-1L
FW12584-1L
125" wide x 84" high Work Wall
125" wide x 84" high Work Wall
140" wide x 84" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11084-2R 16790 84 110 20 628 88
110" WIDE - DOUBLE DEPTH WARDROBE WITH COAT ROD AND HAT SHELF, 60" WIDE WALL CREDENZA WITH BOX/FILE AND ADJUSTABLE SHELF,60" WIDE DOUBLE HEIGHT NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12584-1L 21547 84 125 20 858 103
125" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, TRIPLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, SINGLE HEIGHTSTORAGE, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60" WIDE NICHE, TRIPLE HEIGHT STORAGE, 45" WIDE SINGLEHEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, TRIPLE HEIGHT STORAGE, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $1191 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1195 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12584-1R 21547 84 125 20 858 103
125" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, TRIPLE HEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE,60" WIDE WALL CREDENZA WITH BOX/FILE AND ADJUSTABLE SHELF, 60” WIDE NICHE, 45" WIDE SINGLE HEIGHT STORAGE, TRIPLE HEIGHTSTORAGE, TRIPLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVEADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $1191 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1195 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW14084-1L 23366 84 140 20 936 118
140" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, TRIPLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, SINGLE HEIGHTSTORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60" WIDENICHE, TRIPLE HEIGHT STORAGE CABINET, 45" WIDE SINGLE HEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, DOUBLEDEPTH WARDROBE WITH COAT ROD AND 2 SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $1191 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1195 TO THE LIST PRICE
casegoods work walls (continued)
FW11084-2R • 110” wide x 84” high Work Wall
FW12584-1L • 125” wide x 84” high Work Wall
FW12584-1R • 125” wide x 84” high Work Wall
FW14084-1L • 140” wide x 84” high Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
FW14084-1R
FW9570-1L
FW9570-1R
FW11070-1L
140" wide x 84" high Work Wall
95" wide x 70" high Work Wall
95" wide x 70" high Work Wall
110" wide x 70" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW14084-1R 23366 84 140 20 936 118
140" WIDE - DOUBLE DEPTH WARDROBE WITH COAT ROD AND 2 SHELVES, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, 60" WIDE WALLCREDENZA WITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDE NICHE, 45" WIDE SINGLE HEIGHT STORAGE, TRIPLE HEIGHT STORAGE, VERTICALSTORAGE WITH FIVE ADJUSTABLE SHELVES, TRIPLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVEADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $1191 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1195 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9570-1L 14551 70 95 20 523 66
95" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60"WIDE NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9570-1R 14551 70 95 20 523 66
95" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, 60" WIDE WALL CREDENZA WITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDENICHE, 60" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11070-1L 15950 70 110 20 618 76
110" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60"WIDE NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
casegoods work walls (continued)
FW14084-1R • 140” wide x 84” high Work Wall
FW9570-1L • 95” wide x 70” high Work Wall
FW9570-1R • 95” wide x 70” high Work Wall
FW11070-1L • 110” wide x 70” high Work Wall
110" wide x 70" high Work Wall
FW11070-1R
FW11070-2R
FW12570-1L
FW11070-2L
110" wide x 70" high Work Wall
110" wide x 70" high Work Wall
125" wide x 70" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11070-1R 15950 70 110 20 618 76
110" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZAWITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDE NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE • TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11070-2L 14831 70 110 20 586 76
110” WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60"WIDE DOUBLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, WARDROBE WITH COAT HOOK ANDHAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11070-2R 14831 70 110 20 586 76
110" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZAWITH BOX/FILE AND ADJUSTABLE SHELF, 60” WIDE DOUBLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOURADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12570-1L 16790 70 125 20 713 85
125" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALLCREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60" WIDE NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOURADJUSTABLE SHELVES, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
price guide
casegoods work walls (continued)
foundations – casegoods & conferencing – June 19, 2017
FW11070-1R • 110” wide x 70” high Work Wall
FW11070-2L • 110” wide x 70” high Work Wall
FW11070-2R • 110” wide x 70” high Work Wall
FW12570-1L • 125” wide x 70” high Work Wall
FW12570-1R
FW12570-2L
FW12570-2R
FW14070-1L
125" wide x 70" high Work Wall
125" wide x 70" high Work Wall
125" wide x 70" high Work Wall
140" wide x 70" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12570-1R 16790 70 125 20 713 85
125" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZAWITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDE NICHE, 60" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLESHELVES, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12570-2L 15670 70 125 20 681 85
125" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALLCREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60" WIDE DOUBLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGEWITH FOUR ADJUSTABLE SHELVES, WARDROBE WITH COATHOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE • TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12570-2R 15670 70 125 20 681 85
125" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZAWITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDE DOUBLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOURADJUSTABLE SHELVES, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW14070-1L 18049 70 140 20 750 95
140" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 75" WIDE WALLCREDENZA WITH ADJUSTABLE SHELF NARROW BOX/FILE AND BOX/FILE, 75" WIDE SINGLE HEIGHT NICHE, 75" WIDE DOUBLE HEIGHT STORAGE,DOUBLE DEPTH WARDROBE WITH COAT ROD AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $611 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $937 TO THE LIST PRICE
price guide
casegoods work walls (continued)
foundations – casegoods & conferencing – June 19, 2017
FW12570-1R • 125” wide x 70” high Work Wall
FW12570-2L • 125” wide x 70” high Work Wall
FW12570-2R • 125” wide x 70” high Work Wall
FW14070-1L • 140” wide x 70” high Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
140" wide x 70" high Work Wall
FW14070-1R
FW15570-1R
FW9556-1
FW15570-1L
155" wide x 70" high Work Wall
155" wide x 70" high Work Wall
95" wide x 56" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW14070-1R 18049 70 140 20 750 95
140" WIDE - DOUBLE DEPTH WARDROBE WITH COAT ROD AND HAT SHELF, 75" WIDE WALL CREDENZA WITH BOX/FILE, NARROW BOX/FILE ANDADJUSTABLE SHELF, 75" WIDE SINGLE HEIGHT NICHE, 75" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLESHELVES, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $611 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $937 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW15570-1L 21687 70 155 20 849 107
155" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, DOUBLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, SINGLEHEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 75" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF, NARROWBOX/FILE AND BOX/FILE, 75" WIDE NICHE, 75” WIDE DOUBLE HEIGHT STORAGE, DOUBLE DEPTH WARDROBE WITH COAT ROD AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $825 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1103 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW15570-1R 21687 70 155 20 849 107
155" WIDE - DOUBLE DEPTH WARDROBE WITH COAT ROD AND HAT SHELF, 75" WIDE WALL CREDENZA WITH BOX/FILE, NARROW BOX/FILE ANDADJUSTABLE SHELF, 75" WIDE NICHE, 75" WIDE DOUBLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, DOUBLEHEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $825 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1103 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9556-1 13432 56 95 20 488 55
95" WIDE - VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH TWO BOX/FILES, 60" WIDE SINGLE HEIGHTNICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
casegoods work walls (continued)
FW14070-1R • 140” wide x 70” high Work Wall
FW15570-1L • 155” wide x 70” high Work Wall
FW15570-1R • 155” wide x 70” high Work Wall
FW9556-1 • 95” wide x 56” high Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
FW9556-2
FW11056-1L
FW11056-1R
FW11056-2L
95" wide x 56" high Work Wall
110" wide x 56" high Work Wall
110" wide x 56" high Work Wall
110" wide x 56" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9556-2 12032 56 95 20 420 55
95" WIDE - VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, 60" WIDE WALL OPEN CREDENZA WITH TWO ADJUSTABLE SHELVES, 60" WIDE SINGLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11056-1L 13152 56 110 20 533 63
95" WIDE - VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60"WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11056-1R 13152 56 110 20 533 63
95" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZAWITH BOX/FILE AND ADJUSTABLE SHELF, 60" WIDE SINGLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH THREEADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11056-2L 14551 56 110 20 549 62
110" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZAWITH TWO BOX/FILES, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
casegoods work walls (continued)
FW9556-2 • 95” wide x 56” high Work Wall
FW11056-1L • 110” wide x 56” high Work Wall
FW11056-1R • 110” wide x 56” high Work Wall
FW11056-2L • 110” wide x 56” high Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
110" wide x 56" high Work Wall
FW11056-2R
FW11056-3R
FW11056-4L
FW11056-3L
110" wide x 56" high Work Wall
110" wide x 56" high Work Wall
110" wide x 56" high Work Wall
FW11056-2R 14551 56 110 20 549 62
110" WIDE - VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH TWO BOX/FILES, 60" WIDE NICHE, 60"WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
FW11056-3L 14412 56 110 20 538 62
110" WIDE - VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, 45" WIDE WALL CREDENZA WITH BOX/FILE AND NARROW BOX/FILE, 45"WIDE NICHE, 45" WIDE SINGLE HEIGHT STORAGE, DOUBLE WIDTH VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, WARDROBE WITH COATHOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $336 TO THE LIST PRICE
FW11056-3R 14412 56 110 20 538 62
110" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, DOUBLE WIDTH VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, 45" WIDEWALL CREDENZA WITH NARROW BOX/FILE AND BOX/FILE, 45" WIDE NICHE, 45" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITHTHREE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $336 TO THE LIST PRICE
FW11056-4L 14481 56 110 20 530 61
110" WIDE - VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, SINGLE HIGH 60"WIDE WALL CREDENZA WITH TWO FILES, 60" WIDE TRIPLE HEIGHT STORAGE WITH TWO ADJUSTABLE SHELVES, WARDROBE WITH COAT HOOKAND HAT SHELF
casegoods work walls (continued)
FW11056-2R • 110” wide x 56” high Work Wall
FW11056-3L • 110” wide x 56” high Work Wall
FW11056-3R • 110” wide x 56” high Work Wall
FW11056-4L • 110” wide x 56” high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
price guide
foundations – casegoods & conferencing – June 19, 2017
FW11056-4R
FW9584-20
FW9584-21
FW9584-22
110" wide x 56" high Work Wall
95" wide x 84" high Work Wall
95" wide x 84" high Work Wall
95" wide x 84" high Work Wall
FW11056-4R 14481 56 110 20 530 61
110" WIDE - WARDROBE WITH COAT HOOK AND HAT SHELF, SINGLE HEIGHT 60" WIDE WALL CREDENZA WITH TWO FILES, 60" WIDE TRIPLEHEIGHT STORAGE WITH TWO ADJUSTABLE SHELVES, VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, VERTICAL STORAGE WITH THREEADJUSTABLE SHELVES
FW9584-20 16370 84 95 20 565 77
95" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH TWO BOX/FILES, 60" WIDE TRIPLE HEIGHTNICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
FW9584-21 14971 84 95 20 516 77
95" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH TWO CABINETS WITH ADJUSTABLE SHELVES,60" WIDE TRIPLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $907 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
FW9584-22 16090 84 95 20 611 77
95" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE SINGLE HEIGHT WALL CREDENZA WITH TWO FILES, 60" WIDEDOUBLE HEIGHT STORAGE, 60" WIDE DOUBLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
casegoods work walls (continued)
FW11056-4R • 110” wide x 56” high Work Wall
FW9584-20 • 95” wide x 84” high Work Wall
FW9584-21 • 95” wide x 84” high Work Wall
FW9584-22 • 95” wide x 84” high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
price guide
foundations – casegoods & conferencing – June 19, 2017
110" wide x 84" high Work Wall
FW11084-20L
FW12584-20
FW12584-21
FW11084-20R
110" wide x 84" high Work Wall
125" wide x 84" high Work Wall
125" wide x 84" high Work Wall
FW11084-20L 15950 84 110 15 659 87
110" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 30" WIDE TRIPLE HEIGHT OPEN BOOKCASE, 30" WIDE TRIPLE HEIGHTDOUBLE WIDTH STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 30" WIDE AND DOUBLE HEIGHT STORAGE, 30" WIDE TRIPLEHEIGHT NICHE, 30" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $454 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $253 TO THE LIST PRICE
FW11084-20R 15950 84 110 15 659 87
110" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 30" WIDE DOUBLE HEIGHT STORAGE, 30" WIDE TRIPLE HEIGHT NICHE, 30"WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 30" WIDE TRIPLE HEIGHT OPEN BOOKCASE, 30" WIDETRIPLE HEIGHT DOUBLE WIDTH STORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $454 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $253 TO THE LIST PRICE
FW12584-20 24485 84 125 20 962 101
125" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 90" WIDE WALL CREDENZA WITH 3 BOX/FILES, SINGLE HEIGHT STORAGE,15" WIDE DOUBLE HEIGHT NICHE, SINGLE HEIGHT STORAGE, FOURFOLD HEIGHT VERTICAL STORAGE WITH THREE ADJUSTABLE SHELVES, DOUBLEWIDTH SINGLE HEIGHT STORAGE, 30" WIDE DOUBLE HEIGHT NICHE, DOUBLE WIDTH SINGLE HEIGHT STORAGE, FOURFOLD HEIGHT VERTICALSTORAGE WITH THREE ADJUSTABLE SHELVES, SINGLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, SINGLE HEIGHT STORAGE, VERTICALSTORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $827 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $838 TO THE LIST PRICE
FW12584-21 18189 84 125 20 738 100
125" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WALLCREDENZA WITH TWO CABINETS AND ADJUSTABLE SHELF, 60" WIDE TRIPLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICALSTORAGE WITH FIVE ADJUSTABLE SHELVES, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $907 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
casegoods work walls (continued)
FW11084-20L • 110” wide x 84” high Work Wall
FW11084-20R • 110” wide x 84” high Work Wall
FW12584-20 • 125” wide x 84” high Work Wall
FW12584-21 • 125” wide x 84” high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
price guide
foundations – casegoods & conferencing – June 19, 2017
FW9570-20
FW11070-20
FW12570-20
FW12570-21L
95" wide x 70" high Work Wall
110" wide x 70" high Work Wall
125" wide x 70" high Work Wall
125" wide x 70" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9570-20 14551 70 95 20 563 66
95" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE SINGLE HEIGHT WALL CREDENZA WITH 2 FILES, 60" WIDE DOUBLEHEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE,VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $489 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11070-20 16230 70 110 20 602 78
110" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 30" WIDE SINGLE HEIGHT WALL CREDENZA WITH FILE, 30" WIDE TRIPLEHEIGHT NICHE, 30" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 30" WIDE SINGLE HEIGHT WALLCREDENZA WITH FILE, 30" WIDE TRIPLE HEIGHT NICHE, 30" SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $908 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $657 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12570-20 16790 70 125 15 645 84
125" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 30" WIDE DOUBLE HEIGHT STORAGE, 30" WIDE DOUBLE HEIGHT NICHE,30" WIDE SINGLE HEIGHT STORAGE, DOUBLE WIDTH VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 30" WIDE DOUBLE HEIGHT STORAGE,30" WIDE DOUBLE HEIGHT NICHE, 30" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $657 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12570-21L 17909 70 125 15 685 84
125" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 15" WIDE DOUBLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, 15" WIDE SINGLE HEIGHT STORAGE, DOUBLE WIDTH VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 30" WIDE DOUBLE HEIGHT STORAGE,30" WIDE DOUBLE HEIGHT NICHE, 30" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, VERTICALSTORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $517 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $599 TO THE LIST PRICE
casegoods work walls (continued)
FW9570-20 • 95” wide x 70” high Work Wall
FW11070-20 • 110” wide x 70” high Work Wall
FW12570-20 • 125” wide x 70” high Work Wall
FW12570-21L • 125” wide x 70” high Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
125" wide x 70" high Work Wall
FW12570-21R
FW14070-21L
FW14070-21R
FW14070-20
140" wide x 70" high Work Wall
140" wide x 70" high Work Wall
140" wide x 70" high Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12570-21R 17909 70 125 15 685 84
125" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 30" WIDE DOUBLEHEIGHT STORAGE, 30" WIDE DOUBLE HEIGHT NICHE, 30" WIDE SINGLE HEIGHT STORAGE, DOUBLE WIDTH VERTICAL STORAGE WITH FOURADJUSTABLE SHELVES, 15" WIDE DOUBLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, 15" WIDE SINGLE HEIGHT STORAGE, VERTICALSTORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $517 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $599 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW14070-20 19728 70 140 20 779 96
140" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 30" WIDE DOUBLE HEIGHT STORAGE, 30" WIDE DOUBLE HEIGHT NICHE, 30" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE CABINET WITH FOUR ADJUSTABLE SHELVES, 15" WIDE DOUBLE HEIGHT STORAGE, 15"WIDE DOUBLE HEIGHT NICHE, 15" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 30" WIDE DOUBLEHEIGHT STORAGE, 30" WIDE DOUBLE HEIGHT NICHE, 30" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $819 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $829 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW14070-21L 20847 70 140 20 832 96
140" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE DOUBLE HEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLEHEIGHT STORAGE, 15" WIDE TRIPLE HEIGHT STORAGE, 15" WIDE SINGLE HEIGHT STORAGE, 30" WIDE DOUBLE HEIGHT NICHE, 30" WIDE SINGLEHEIGHT STORAGE, 90" WIDE SINGLE HEIGHT WALL CREDENZA, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $943 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $845 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW14070-21R 20847 70 140 20 832 96
140" WIDE - VERTICAL STORAGE WITH 4 AD. SHELVES, 15" WIDE SINGLE HEIGHT STORAGE, 30" WIDE DOUBLE HEIGHT NICHE, 30" WIDESINGLE HEIGHT STORAGE, 90" WIDE SINGLE HEIGHT WALL CREDENZA WITH THREE FILES, 15" WIDE TRIPLE HEIGHT STORAGE, 60" WIDE DOUBLEHEIGHT STORAGE, 60" WIDE NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $943 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $845 TO THE LIST PRICE
casegoods work walls (continued)
FW12570-21R • 125” wide x 70” high Work Wall
FW14070-20 • 140” wide x 70” high Work Wall
FW14070-21L • 140” wide x 70” high Work Wall
FW14070-21R • 140” wide x 70” high Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
FW15570-20
FW10784L
FW9270O2R
FW9584OWR
155" wide x 70" high Work Wall
107" wide x 84" high Work Wall
92" wide x 70" high Open Knee Space Work Wall
95" wide x 84" high Open Knee Space Work Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW15570-20 22666 70 155 20 900 108
155" WIDE - VERTICAL STORAGE WITH FOUR ADJUSTABLE SHELVES, 60" WIDE WALL CREDENZA WITH TWO BOX/FILES, 45" WIDE DOUBLEHEIGHT NICHE, 45" WIDE SINGLE HEIGHT STORAGE, 30" WIDE DOUBLE WIDTH STORAGE WITH TWO ADJUSTABLE SHELVES, 60" WIDE WALLCREDENZA WITH TWO BOX/FILES, 45" WIDE DOUBLE HEIGHT NICHE, 45" WIDE SINGLE HEIGHT STORAGE, VERTICAL STORAGE WITH FOURADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $1210 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $867 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW10784L 16790 84 107.5 20
107.5" WIDE - 60" WIDE WALL CREDENZA WITH ADJUSTABLE SHELF AND BOX/FILE, 60" WIDE TRIPLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHTSTORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, TRIPLE HEIGHT STORAGE, 15" WIDE DOUBLE HEIGHT NICHE, SINGLE HEIGHTSTORAGE, VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9270O2R 10553 70 92.5 20
92.5" WIDE - 60" WIDE WORKSURFACE WALL CREDENZA, 60" WIDE DOUBLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, VERTICALSTORAGE WITH FOUR ADJUSTABLE SHELVES, WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9584OWR 11060 84 95 20
95" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WORKSURFACE WALL CREDENZA, 60" WIDE DOUBLE HEIGHT NICHE,60" WIDE DOUBLE HEIGHT STORAGE, WARDROBE WITH COAT HOOK AND HAT SHELF.
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
casegoods work walls (continued)
FW15570-20 • 155” wide x 70” high Work Wall
FW10784L • 107” wide x 84” high Work Wall
FW9270O2R • 92” wide x 70” high Open Knee Space Work Wall
FW9584OWR • 95” wide x 84” high Open Knee Space Work Wall
price guide
foundations – casegoods & conferencing – June 19, 2017
110" wide x 84" high Open Knee Space Work Wall
FW11084OW2R
FW9026-1
FW9026-2
FW12584OIL
125" wide x 84" high Open Knee Space Work Wall
90" wide x 26" high Work Wall Credenza
90" wide x 26" high Work Wall Credenza
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW11084OW2R 12792 84 110 20
110” WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, 60" WIDE WORKSURFACE WALL CREDENZA, 60" WIDE DOUBLE HEIGHTNICHE, 60" WIDE DOUBLE HEIGHT STORAGE, DOUBLE DEPTH WARDROBE WITH COAT ROD AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $605 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $414 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW12584OIL 17549 84 125 20
125" WIDE - VERTICAL STORAGE WITH FIVE ADJUSTABLE SHELVES, TRIPLE HEIGHT STORAGE, 15" WIDE TRIPLE HEIGHT STORAGE, 15" WIDEDOUBLE HEIGHT NICHE, SINGLE HIGH STORAGE, 60" WIDE WORKSURFACE WALL CREDENZA, 60" WIDE SINGLE HEIGHT NICHE, TRIPLE HEIGHTSTORAGE, 45" WIDE SINGLE HEIGHT STORAGE, 60" WIDE SINGLE HEIGHT NICHE, 60" WIDE SINGLE HEIGHT STORAGE, TRIPLE HEIGHT STORAGE,WARDROBE WITH COAT HOOK AND HAT SHELF
• TO ADD TACKBOARD TO NICHE, ADD “TB” THE END OF THE PRODUCT CODE AND ADD $1191 TO THE LIST PRICE• TO ADD LED LIGHT TO NICHE, ADD “LT” THE END OF THE PRODUCT CODE AND ADD $1195 TO THE LIST PRICE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9026-1 6576 26 90 20 254 27
90" WIDE - WALL CREDENZA WITH BOX/FILE, BOX/FILE AND ADJUSTABLE SHELF
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9026-2 6856 26 90 20 270 27
90" WIDE - WALL CREDENZA WITH BOX/FILE, BOX/FILE AND ADJUSTABLE SHELF
casegoods work walls (continued)
FW11084OW2R • 110” wide x 84” high Open Knee Space Work Wall
FW12584OIL • 125” wide x 84” high Open Knee Space Work Wall
FW9026-1 • 90” wide x 26” high Work Wall Credenza
FW9026-2 • 90” wide x 26” high Work Wall Credenza
price guide
foundations – casegoods & conferencing – June 19, 2017
FW9026-3
FW9026-4
90" wide x 26" high Work Wall Credenza
90" wide x 26" high Work Wall Credenza
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9026-3 6856 26 90 20 270 27
90" WIDE - WALL CREDENZA WITH ADJUSTABLE SHELF, BOX/FILE AND BOX/FILE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FW9026-4 7275 26 90 20 310 27
90" WIDE - WALL CREDENZA WITH THREE BOX/FILESNOTE: CENTRE PEDESTAL DOES NOT HAVE A LOCK
casegoods work walls (continued)
FW9026-3 • 90” wide x 26” high Work Wall Credenza
FW9026-4 • 90” wide x 26” high Work Wall Credenza
price guide
foundations – casegoods & conferencing – June 19, 2017
conference room furnitureCONFERENCE ROOM FURNITURE • TECHNICAL INFORMATION
• Horizontal grain direction is standard on all engineered finishes. If natural veneer is required the graindirection will be vertical - Add suffix “VG” to the end of the product code
• Full Storage Credenza backs include GM17 vertical cut out• Optional decorative credenza back panels (FBP) are available for full storage credenzas FC/FCD• Doors open with touch latch• To open the drawer, pull drawer front overhang - no handles available• Display Wall can be purchased with optional monitor mount installed• Mobile and stationary lecterns are available• For optional light and microphone see the Accessories section• See Finishes section for metal color finish
Full Storage Credenza with two sets of Storage Cabinets
FC-xx
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FC9020GG 5346 29 96 20 241 36FC8420GG 5135 29 84 20 232 33FC7820GG 4767 29 78 20 223 31FC7220GG 4637 29 72 20 213 29FC6020MM 4305 29 60 20 194 26
Full Storage Credenza with BBB on Left, Storage Cabinet and BBB on Right
FCD-A
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCD9020A 5666 29 90 20 249 36FCD8420A 5454 29 84 20 240 33FCD7820A 5064 29 78 20 230 31FCD7220A 4956 29 72 20 221 29FCD6020A 4626 29 60 20 202 26
Decorative Credenza Back Panel
FBP
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBP9020 911 22 90 0.75 41 4FBP8420 865 22 84 0.75 38 4FBP7820 804 22 78 0.75 36 3FBP7220 700 22 72 0.75 33 3FBP6020 593 22 60 0.75 27 3
NOTE: Arrow indicates direction of grain.
Optional DecorativeCredenza Back Panel
price guide
foundations – casegoods & conferencing – June 19, 2017
FC-GGTWH
FCD-ATWH
Full Storage Credenza with two sets of Storage Cabinets and Display Wall
Full Storage Credenza with BBB, Storage Cabinet, BBB and Display Wall
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FC9024GGTWH72 8287 72 90 24 463 47FC8424GGTWH72 7896 72 84 24 444 44FC7824GGTWH72 7333 72 78 24 424 41FC7224GGTWH72 7111 72 72 24 403 38FC9024GGTWH66 8000 66 90 24 425 47FC8424GGTWH66 7685 66 84 24 406 44FC7824GGTWH66 7135 66 78 24 286 41FC7224GGTWH66 6915 66 72 24 365 38
MONITOR SIZE CHART BASED ON DISPLAY WALL SIZE: DISPLAY WALL WIDTH MONITOR SIZE90" 54"84" 50"78" 46"72" 42"
NOTE: MONITORS AND TV MOUNTS ARE NOT INCLUDEDDISPLAY WALL INCLUDES GM1
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FCD9024ATWH72 8287 72 90 24 481 48FCD8424ATWH72 8024 72 84 24 460 45FCD7824ATWH72 7461 72 78 24 439 42FCD7224ATWH72 7240 72 72 24 418 39FCD9024ATWH66 8128 66 90 24 444 48FCD8424ATWH66 7814 66 84 24 422 45FCD7824ATWH66 7263 66 78 24 402 42FCD7224ATWH66 7043 66 72 24 381 39
MONITOR SIZE CHART BASED ON DISPLAY WALL SIZE: DISPLAY WALL WIDTH MONITOR SIZE90" 54"84" 50"78" 46"72" 42"
NOTE: MONITORS AND TV MOUNTS ARE NOT INCLUDEDDISPLAY WALL INCLUDES GM1
conference room furniture (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Full Storage Credenza with BB, Storage Cabinet, BB and Display Wall
FFTWA-WH
FVMED
FVLRG
TV Mount for Flat Screen Monitors up to 50"
TV Mount for Flat Screen Monitors over 50"
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FFTWA90WH72 8809 72 90 24 482 41FFTWA84WH72 8508 72 84 24 462 38FFTWA78WH72 8068 72 78 24 442 35FFTWA72WH72 7586 72 72 24 421 32FFTWA90WH66 8523 66 90 24 462 40FFTWA84WH66 8222 66 84 24 443 37FFTWA78WH66 7798 66 78 24 424 34FFTWA72WH66 7361 66 72 24 404 31
MONITOR SIZE CHART BASED ON DISPLAY WALL SIZE: DISPLAY WALL WIDTH MONITOR SIZE90" 54"84" 48"78" 42"72" 36"
NOTE: MONITORS AND TV MOUNTS ARE NOT INCLUDED
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FVMED 352 17 28 2 14 0.7
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FVLRG 409 21 38 2 25 0.75
conference room furniture (continued)
FLEC-36
Lectern
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FLEC36 5118 42 36 20 166 22
• WITH POP-UP DOOR TO REVEAL CONCEALED POWER/DATA MONUMENT (POWER DUPLEX, 15 PIN VGA, DATA AND TELEPHONE CONNECTORS)• OPTIONAL LIGHT AND/OR MICROPHONE TO BE SPECIFIED• METAL FINISH ON BASE, BOOK REST AND HANDLES MUST BE SPECIFIED• INCLUDES 1 ADJUSTABLE SHELF
price guide
foundations – casegoods & conferencing – June 19, 2017
FLEC-24
FLEC-24M
FSM
FTCM
Lectern
Mobile Lectern
Mobile Server
Mobile Tech Cart
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FLEC24 4222 42 24 20 135 15
• WITH LAPTOP PULL-OUT TRAY TO REVEAL CONCEALED POWER/DATA MONUMENT (POWER DUPLEX, 15 PIN VGA, DATA AND TELEPHONE CONNECTORS)• OPTIONAL LIGHT OR MICROPHONE TO BE SPECIFIED• METAL FINISH ON BASE, BOOK REST AND HANDLES MUST BE SPECIFIED• INCLUDES 1 ADJUSTABLE SHELF
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FLEC24M 3127 42 24 20 135 15
• WITH LAPTOP PULL-OUT TRAY• METAL FINISH ON BASE, BOOK REST AND HANDLES MUST BE SPECIFIED• INCLUDES 1 ADJUSTABLE SHELF• WITH LOCKING CASTERS (TUNGSTEN ONLY)
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FSM4020 3407 30 40 20 108 21
• WITH CUTLERY DRAWER AND ADJUSTABLE SHELF• METAL FINISH ON HANDLES MUST BE SPECIFIED• WITH LOCKING CASTERS (TUNGSTEN ONLY)
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FTCM2020H42 2482 42 20 20 67 13.5FTCM2020H36 2128 36 20 20 54 10.5
• METAL FINISH ON HANDLES MUST BE SPECIFIED• INCLUDES 1 ADJUSTABLE SHELF• WITH LOCKING CASTERS (TUNGSTEN ONLY)
conference room furniture (continued)
K.3
price guide
foundations – casegoods & conferencing – June 19, 2017
conference tablesCONFERENCE TABLES • TECHNICAL INFORMATION
• Descor is offering a variety of Foundations Conference Tables• Table tops are 1 1/2" thick with a 2" undercut knife edge• All tops have a 1/8" (3mm) solid edge of walnut, cherry, maple and oak• For optional grommet location on tables without Technology Trough see the Series Details section• See Technology Trough details in Series Details section• For Tables with 3 Bases and Technology Trough please add “C” (for Center Base Feed) or “E” (for End Base Feed) to the end of the product code Example FRESTCT19298C
Rectangular Shaped Conference Table, one-piece top
FRE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRE12048 7247 29 120 48 450 54FRE9648 6563 29 96 48 390 49
• WITH 2 BASES
Rectangular Shaped Conference Table, two-piece top
FRE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRE16848 8852 29 168 48 571 65FRE14448 8016 29 144 48 511 60FRE12048-2 7343 29 120 48 450 56
• WITH 2 BASES
Rectangular Shaped Conference Table, two-piece top
FRE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRE24060 14133 29 240 60 965 109FRE21660 13339 29 216 60 893 104FRE19260 12520 29 192 60 821 99FRE16860 11711 29 168 60 748 93FRE21648 12242 29 216 48 872 87FRE19248 11515 29 192 48 774 82
• WITH 3 BASES
Foundations Conference Table Edge
price guide
foundations – casegoods & conferencing – June 19, 2017
FREST
FREST
FRESTCT
FRESTCT
Rectangular Shaped Sectional Conference Table
Rectangular Shaped Sectional Conference Table
Rectangular Shaped Sectional Conference Table
Rectangular Shaped Sectional Conference Table
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREST16848 9023 29 168 48 571 65FREST14448 8308 29 144 48 511 60FREST12048 7588 29 120 48 450 54
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREST24060 14437 29 240 60 965 109FREST21660 13628 29 216 60 893 104FREST19260 12719 29 192 60 821 99FREST16860 11848 29 168 60 748 93FREST21648 12576 29 216 48 872 87FREST19248 11799 29 192 48 744 82
• WITH 3 BASES• 168" MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRESTCT16848 13769 29 168 48 659 69FRESTCT14448 11029 29 144 48 584 63FRESTCT12048 10225 29 120 48 508 57
• WITH 2 BASES / POWER KIT INCLUDED• TECHNOLOGY TROUGH WITH 8 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRESTCT24060 20126 29 240 60 1113 116FRESTCT21660 19058 29 216 60 1021 109FRESTCT19260 17902 29 192 60 920 103FRESTCT16860 16708 29 168 60 836 96FRESTCT21648 18055 29 216 48 1000 92FRESTCT19248 17006 29 192 48 843 87
• WITH 3 BASES / ADD CORE (BASE FEED LOCATION)• TECHNOLOGY TROUGH WITH 8 DOORS• 168" MIDSECTION IN ONE-PIECE
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Rectangular Shaped Conference Table with Bow Ends, one-piece top
FREBE
FREBE
FREBEST
FREBE
Rectangular Shaped Conference Table with Bow Ends, two-piece top
Rectangular Shaped Conference Table with Bow Ends, two-piece top
Rectangular Shaped Sectional Conference Table with Bow Ends
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREBE12048 7610 29 120 48 450 54FREBE9648 6891 29 96 48 390 49
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREBE16848 9295 29 168 48 571 65FREBE14448 8416 29 148 48 511 60FREBE12048-2 7711 29 120 48 450 55
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREBE24060 14838 29 240 60 965 109FREBE21660 14006 29 216 60 893 104FREBE19260 13146 29 192 60 821 99FREBE16860 12296 29 168 60 748 93FREBE21648 12852 29 216 48 872 87FREBE19248 12090 29 192 48 744 82
• WITH 3 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREBEST16848 9474 29 168 48 571 65FREBEST14448 8723 29 144 48 511 60FREBEST12048 7967 29 120 48 450 55
• WITH 2 BASES
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
FREBEST
FREBESTCT
FREBESTCT
FBO
Rectangular Shaped Sectional Conference Table with Bow Ends
Rectangular Shaped Sectional Conference Table with Bow Ends
Rectangular Shaped Sectional Conference Table with Bow Ends
Boat Shaped Conference Table, one-piece top
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREBEST24060 15159 29 240 60 965 109FREBEST21660 14309 29 216 60 893 104FREBEST19260 13355 29 192 60 821 99FREBEST16860 12439 29 168 60 748 93FREBEST21648 13203 29 216 48 872 87FREBEST19248 12388 29 192 48 744 82
• WITH 3 BASES• 168" MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREBESTCT16848 14457 29 168 48 659 69FREBESTCT14448 11580 29 144 48 584 63FREBESTCT12048 10737 29 120 48 508 57
• WITH 2 BASES / POWER KIT INCLUDED• TECHNOLOGY TROUGH WITH 8 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FREBESTCT24060 21131 29 240 60 1113 116FREBESTCT21660 20009 29 216 60 1021 109FREBESTCT19260 18796 29 192 60 920 103FREBESTCT16860 17543 29 168 60 836 96FREBESTCT21648 18957 29 216 48 1000 92FREBESTCT19248 17856 29 192 48 843 87
• WITH 3 BASES / ADD CORE (BASE FEED LOCATION)• TECHNOLOGY TROUGH WITH 8 DOORS• 168" MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBO12048 7989 29 120 48 450 54FBO9648 7234 29 96 48 390 49
• WITH 2 BASES
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Boat Shaped Conference Table, two-piece top
FBO
FBOST
FBOST
FBO
Boat Shaped Conference Table, two-piece top
Boat Shaped Sectional Conference Table
Boat Shaped Sectional Conference Table
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBO16848 9758 29 168 48 571 65FBO14448 8837 29 144 48 511 60FBO12048-2 8095 29 120 48 450 55
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBO24060 15580 29 240 60 965 109FBO21660 14705 29 216 60 893 104FBO19260 13803 29 192 60 821 99FBO16860 12910 29 168 60 748 93FBO21648 13494 29 216 48 872 87FBO19248 12694 29 192 48 744 82
• WITH 3 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOST16848 9947 29 168 48 571 65FBOST14448 9158 29 144 48 511 60FBOST12048 8364 29 120 48 450 56
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOST24060 15916 29 240 60 965 109FBOST21660 15024 29 216 60 893 104FBOST19260 14022 29 192 60 821 99FBOST16860 13062 29 168 60 748 93FBOST21648 13863 29 216 48 872 87FBOST19248 13007 29 192 48 744 82
• WITH 3 BASES• 168" MIDSECTION IN ONE-PIECE
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
FBOSTCT
FBOSTCT
FBOBE
FBOBE
Boat Shaped Sectional Conference Table
Boat Shaped Sectional Conference Table
Boat Shaped Conference Table, one-piece top
Boat Shaped Conference Table, two-piece top
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOSTCT16848 15179 29 168 48 659 69FBOSTCT14448 12158 29 144 48 584 63FBOSTCT12048 11274 29 120 48 508 57
• WITH 2 BASES / POWER KIT INCLUDED• TECHNOLOGY TROUGH WITH 8 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOSTCT24060 22187 29 240 60 1113 116FBOSTCT21660 21008 29 216 60 1021 109FBOSTCT19260 19735 29 192 60 920 103FBOSTCT16860 18419 29 168 60 836 96FBOSTCT21648 19649 29 216 48 1000 92FBOSTCT19248 18747 29 192 48 843 87
• WITH 3 BASES / ADD CORE (BASE FEED LOCATION)• TECHNOLOGY TROUGH WITH 8 DOORS• 168" MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOBE12048 8259 29 120 48 450 54FBOBE9648 7467 29 96 48 390 49
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOBE16848 10117 29 168 48 571 65FBOBE14448 9149 29 144 48 511 60FBOBE12048-2 8372 29 120 48 450 55
• WITH 2 BASES
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Boat Shaped Conference Table, two-piece top
FBOBE
FBOBEST
FBOBESTCT
FBOBEST
Boat Shaped Sectional Conference Table
Boat Shaped Sectional Conference Table
Boat Shaped Sectional Conference Table
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOBE24060 16231 29 240 60 965 109FBOBE21660 15311 29 216 60 893 104FBOBE19260 14364 29 192 60 821 99FBOBE16860 13426 29 168 60 748 93FBOBE21648 14040 29 216 48 872 87FBOBE19248 13200 29 192 48 744 82
• WITH 3 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOBEST16848 10316 29 168 48 571 65FBOBEST14448 9487 29 144 48 511 60FBOBEST12048 8650 29 120 48 450 56
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOBEST24060 16583 29 240 60 965 109FBOBEST21660 15647 29 216 60 893 104FBOBEST19260 14461 29 192 60 821 99FBOBEST16860 13585 29 168 60 748 93FBOBEST21648 14428 29 216 48 872 87FBOBEST19248 13529 29 192 48 744 82
• WITH 3 BASES• 168" MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOBESTCT16848 15810 29 168 48 659 69FBOBESTCT14448 12637 29 144 48 584 63FBOBESTCT12048 11709 29 120 48 508 57
• WITH 2 BASES / POWER KIT INCLUDED• TECHNOLOGY TROUGH WITH 8 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
FBOBESTCT
FRA
FRA
FRA
Boat Shaped Sectional Conference Table
Racetrack Conference Table, one-piece top
Racetrack Conference Table, two-piece top
Racetrack Conference Table, two-piece top
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FBOBESTCT24060 23168 29 240 60 1113 116FBOBESTCT21660 21930 29 216 60 1021 109FBOBESTCT19260 20593 29 192 60 920 103FBOBESTCT16860 19219 29 168 60 836 96FBOBESTCT21648 20503 29 216 48 1000 92FBOBESTCT19248 19556 29 192 48 843 87
• WITH 3 BASES / ADD C OR E (BASE FEED LOCATION)• TECHNOLOGY TROUGH WITH 8 DOORS• 168” MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRA12048 8388 29 120 48 450 54FRA9648 7595 29 96 48 390 49
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRA16848 10245 29 168 48 571 65FRA14448 9277 29 144 48 511 60FRA12048-2 8500 29 120 48 450 55
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRA24060 16359 29 240 60 965 109FRA21660 15440 29 216 60 893 104FRA19260 14492 29 192 60 821 99FRA16860 13555 29 168 60 748 93FRA21648 14169 29 216 48 872 87FRA19248 13328 29 192 48 744 82
• WITH 3 BASES
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Racetrack Sectional Conference Table
FRAST
FRASTCT
FRASTCT
FRAST
Racetrack Sectional Conference Table
Racetrack Sectional Conference Table
Racetrack Sectional Conference Table
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRAST16848 10444 29 168 48 571 65FRAST14448 9616 29 144 48 511 60FRAST12048 8778 29 120 48 450 55
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRAST24060 16712 29 240 60 965 109FRAST21660 15775 29 216 60 893 104FRAST19260 14589 29 192 60 821 99FRAST16860 13713 29 168 60 748 93FRAST21648 14556 29 216 48 872 87FRAST19248 13657 29 192 48 744 82
• WITH 3 BASES• 168" MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRASTCT16848 15938 29 168 48 659 69FRASTCT14448 12765 29 144 48 584 63FRASTCT12048 11837 29 120 48 508 57
• WITH 2 BASES / POWER KIT INCLUDED• TECHNOLOGY TROUGH WITH 8 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS• TECHNOLOGY TROUGH WITH 4 DOORS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRASTCT24060 23296 29 240 60 1113 116FRASTCT21660 22058 29 216 60 1021 109FRASTCT19260 20721 29 192 60 920 103FRASTCT16860 19340 29 168 60 836 96FRASTCT21648 20631 29 216 48 1000 92FRASTCT19248 19684 29 192 48 843 87
• WITH 3 BASES / ADD C OR E (BASE FEED LOCATION)• TECHNOLOGY TROUGH WITH 8 DOORS• 168" MIDSECTION IN ONE-PIECE
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
FWE
FWE
FWE
FWEST
Wedge Shaped Conference Table, one-piece top
Wedge Shaped Conference Table, two-piece top
Wedge Shaped Conference Table, two-piece top
Wedge Shaped Sectional Conference Table
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FWE1206048 7375 29 120 60/48 511 60
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FWE1446048 8980 29 144 60/48 571 65FWE1206048-2 8144 29 120 60/48 511 60
• WITH 2 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FWE2406048 14261 29 240 60/48 1037 114FWE2166048 13467 29 216 60/48 965 109FWE1926048 12649 29 192 60/48 893 104FWE1686048 11839 29 168 60/48 630 70
• WITH 3 BASES
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FWEST1446048 9151 29 144 60/48 571 65FWEST1206048 8436 29 120 60/48 511 60
• WITH 2 BASES
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Wedge Shaped Sectional Conference Table
FWEST
FWESTCT
FRE
FWESTCT
Wedge Shaped Sectional Conference Table
Wedge Shaped Sectional Conference Table
Square Table
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FWEST2406048 14310 29 240 60/48 1037 114FWEST2166048 13757 29 216 60/48 965 109FWEST1926048 13355 29 192 60/48 893 104FWEST1686048 11976 29 168 60/48 630 70
• WITH 3 BASES• 168" MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FWESTCT1446048 13900 29 144 60/48 571 65FWESTCT1206048 11157 29 120 60/48 511 60
• WITH 2 BASES / POWER KIT INCLUDED• TECHNOLOGY TROUGH WITH 4 DOORS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FWESTCT2406048 20254 29 240 60/48 1037 114FWESTCT2166048 19186 29 216 60/48 965 109FWESTCT1926048 17902 29 192 60/48 893 104FWESTCT1686048 16836 29 168 60/48 823 99
• WITH 3 BASES / ADD C OR E (BASE FEED LOCATION)• TECHNOLOGY TROUGH WITH 8 DOORS• 168" MIDSECTION IN ONE-PIECE
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRE6060 4299 29 60 60 261 44FRE5454 4012 29 54 54 233 42FRE4848 3711 29 48 48 207 40FRE4242 3485 29 42 42 185 39
• WITH MONO BASE• NO GROMMET OPTION AVAILABLE
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
FRO
Round Table
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FRO60 4514 29 60 60 261 44FRO54 4213 29 54 54 233 42FRO48 3896 29 48 48 207 40FRO42 3659 29 42 42 185 39
• WITH MONO BASE• NO GROMMET OPTION AVAILABLE
conference tables (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Vault Conference Power Grommet
BTC001
BTC003
ESMR
BTC002
Vault Conference Power Grommet
Vault Desk Power Grommet
Power/Data Management, 1 Duplex, 1 Telcom K/O, 10’ Cord
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
BTC001 1170 4 16 4.5
• INCLUDES 3 POWER, 3 DATA AND VGA• MOTORIZED TOUCH CONTROL ROTATES TOP TO REVEAL OR CONCEAL DATA/POWER CONNECTIONS• 5’ CORD WITH 3 PRONG PLUG, ANODIZED ONLY
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
BTC002 1099 4 14 4.5
• INCLUDES 3 POWER, 2 DATA• MOTORIZED TOUCH CONTROL ROTATES TOP TO REVEAL OR CONCEAL DATA/POWER CONNECTIONS• 5’ CORD WITH 3 PRONG PLUG, ANODIZED ONLY
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
BTC003 1050 4 12 4.5
• INCLUDES 2 POWER, 1 DATA• MOTORIZED TOUCH CONTROL ROTATES TOP TO REVEAL OR CONCEAL DATA/POWER CONNECTIONS• 5’ CORD WITH 3 PRONG PLUG, ANODIZED ONLY
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMR101A 847 3.5 6.25 6.25 4 1ESMR101E 847 3.5 6.25 6.25 4 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 1 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
accessories
price guide
foundations – casegoods & conferencing – June 19, 2017
ESMR
ESMR
ESMR
ESMR
Power/Data Management, 1 Duplex, 1 Telcom K/O, Hardwire
Power/Data Management, 2 Duplex, 1 Telcom K/O, 10’ Cord
Power/Data Management, 2 Duplex, 1 Telcom K/O, Hardwire
Power/Data Management, 2 Duplex, 2 Telcom K/O, 10’ Cord
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMRH101A 910 3.5 6.25 6.25 4 1ESMRH101E 910 3.5 6.25 6.25 4 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 1 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMR201A 1037 3.5 9.5 6.25 5 1ESMR201E 1037 3.5 9.5 6.25 5 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 2 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMRH201A 1101 3.5 9.5 6.25 5 1ESMRH201E 1101 3.5 9.5 6.25 5 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 2 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMR202A 1140 3.5 10.75 6.25 5 1ESMR202E 1140 3.5 10.75 6.25 5 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 2 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
accessories (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Power/Data Management, 2 Duplex, 2 Telcom K/O, Hardwire
ESMR
ESMR
ESMR
ESMR
Power/Data Management, 2 Duplex, 3 Telcom K/O, 10’ Cord
Power/Data Management, 2 Duplex, 3 Telcom K/O, Hardwire
Power/Data Management, 3 Duplex, 2 Telcom K/O, 10’ Cord
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMRH202A 1203 3.5 10.75 6.25 5 1ESMRH202E 1203 3.5 10.75 6.25 5 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 2 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMR203A 1241 3.5 12 6.25 6 1ESMR203E 1241 3.5 12 6.25 6 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 2 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMRH203A 1305 3.5 12 6.25 6 1ESMRH203E 1305 3.5 12 6.25 6 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 2 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMR302A 1261 3.5 12 6.25 6 1ESMR302E 1261 3.5 12 6.25 6 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 3 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
accessories (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
ESMR
LRTM1
LRTM2
PKE
Power/Data Management, 3 Duplex, 2 Telcom K/O, Hardwire
Power/Data Management, Recessed Door 1 Duplex, 1 Telcom K/O, 10” Cord
Power/Data Management, Recessed Door, 2 Duplex, 2 Telcom K/O, 10” Cord
Power Kit for End Base Feed with 4 Doors
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ESMRH302A 1324 3.5 12 6.25 6 1ESMRH302E 1324 3.5 12 6.25 6 1
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 3 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• A = ANODIZED ALUMINUM• E = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
LRTM101K 547 3.5 4.7 10.7 5 2LRTM101B 547 3.5 4.7 10.7 5 2
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 1 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• K = TUNGSTEN• B = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
LRTM202K 637 3.5 4.7 10.7 6 2LRTM202B 637 3.5 4.7 10.7 6 2
• IF NO TELCOM PLATE IS SPECIFIED, BLANK COVERPLATE WILL BE INCLUDED• INCLUDES 2 DUPLEX ON TOP AND ONE SIMPLEX ON BOTTOM• K = TUNGSTEN• B = BLACK
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PKE144 2047 PKE120 1960
• SINGLE CIRCUIT WITH 4 DOORS
accessories (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Power Kit for End Base Feed with 8 Doors
PKE
ABLBB
ABLBBBB
PKC
Power Kit for Centre Base Feed with 8 Doors
Telcom Plate
Telcom Plate
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PKE240 4299 PKE216 4153 PKE192 4007 PKE168 3860
• DOUBLE CIRCUIT WITH 8 DOORS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
PKC240 4302 PKC216 4153 PKC192 4007 PKC168 3860
• DOUBLE CIRCUIT WITH 8 DOORS
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ABLBB 280
• BLACK TELCOM PLATE WITH TWO RJ45 CAT 6 DATA
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ABLBBBB 545
• BLACK TELCOM PLATE WITH FOUR RJ45 CAT 6 DATA
accessories (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
ABLABC514
ABLC51L
ABLABC45
ABL102102
Telcom Plate
Telcom Plate
Telcom Plate
Telcom Plate
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ABLAB437 435
• BLACK TELCOM PLATE WITH ONE RJ11 CAT 3 PHONE, ONE RJ45 CAT 6 DATA, ONE MINI STEREO AND 15 PIN HD VGA
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ABLC45C51L 622
• BLACK TELCOM PLATE WITH ONE MINI STEREO, ONE 15 PIN HD VGA AND ONE HDMI
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ABLC17AB 486
• BLACK TELCOM PLATE WITH ONE RJ11 CAT 3 PHONE, ONE RJ45 CAT 6 DATA AND ONE HDMI
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
ABLC9C9 255
• BLACK TELCOM PLATE WITH TWO USB
accessories (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
T5 Tasklight
FLUC
LIG
MIC
FLED
LED Light
LED Snake Light with dimmer
Microphone
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FLUC48 181 1.25 48 4.25 8 3FLUC36 164 1.25 36 4.25 6 2FLUC24 154 1.25 24 4.25 4 1FLUC20 146 1.25 19.5 4.25 3 1
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
FLED48 533 1 48 1 1 1FLED36 432 1 36 1 1 1FLED24 325 1 24 1 1 1FLED12 276 1 12 1 1 1
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
LIG400 271 13 6.5 2.5 1 1
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
MIC400 709 24 2 2 1 1
accessories (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
VVACSBLK
LO
LOB
LOCK
Wire Management Snake
Lock Assembly
Lock Drum with Key
Lock Key
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
VVACSBLK (Black) 183 39 2 2 3 0.5
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
LO (Black) 72 LO/C (Tungsten) 72
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
LOB (Black) 15 LOB/C (Tungsten) 15
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
LOCK 10
accessories (continued)
price guide
foundations – casegoods & conferencing – June 19, 2017
Round Grommet - Plastic
GM1
QC
GM5
Rectangular Grommet - Metal
Quick Connector
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
GM1E (Black) 31 2.4 2GM1K (Tungsten) 31 2.4 2
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
GM5E (Black) 55 3.5 2GM5K (Tungsten) 55 3.5 2
PRODUCT PRICE SIZE/INCHES WEIGHT VOLCODE H W D LBS FT3
QC50 19 QC30 19
accessories (continued)
www.teknion.com
: Flint RoadToronto, Ontario CanadaTel .teknion
..
: Fellowship RoadMt Laurel, New Jersey Tel .teknion
..
:Europe, South and Central AmericaMiddle East, Asia and RussiaFor regional contact information go to www.teknion.com
// -©Teknion
®, ™ trade marks of TeknionCorporation and/or its subsidiaries orlicensed to it. Patents may be pending.
Some products may not be available inall markets. Contact your localTeknion Representative for availability.
--