Security Systems BU Communication Systems

DCN MCCU IO Maintenance09.12.2004 ST/SEU-CO 1

Select settings in Maintenance Menu

Default language for the delegate/chairman’s unit LC-Displays Assign ‘Stand-alone’ intercom operator.

I&O Manual

Security Systems BU Communication Systems

DCN MCCU IO Maintenance09.12.2004 ST/SEU-CO 2

Language setting in Maintenance Menu

Language for the delegate/chairman’s unit LC-Display The 6 default fixed languages in a stand-alone a system available

are displayed as follows: English, German, French, Italian, Spanish, Dutch

Optional as 6 languages with PC-Control: 6 of total 20 English, German, French, Italian, Spanish, Dutch,

Portuguese, Catalan, Finnish, Latvian, Swedish, Japanese, Czech, Russian, Chinese (Simplified), Chinese (Traditional), Lithuanian, Slovenian, Polish, Slovak

Notes: The DCN PC software will terminate if the Maintenance mode is selected.

Security Systems BU Communication Systems

DCN MCCU IO Maintenance09.12.2004 ST/SEU-CO 3

Intercom setting in Maintenance Menu

Assign ‘Stand-alone’ intercom operator. Only one Unit can be set with the intercom operator function. All units equipped with a hand-set can be set as the intercom

operator

Notes: Once the ‘Intercom operators’ position has been set, no

further indication is given The default system intercom operators position will only take

effect when the CCU reverts back to the congress operational mode.

Security Systems BU Communication Systems

DCN MCCU IO Maintenance09.12.2004 ST/SEU-CO 4

Select settings in Maintenance Menu

End of section

Robert Bosch GmbH

All rights are reserved. Reproduction or passing on to

third parties in whole or in parts is prohibited without the

written consent of the copyright owner.