security catalogue

SecurityCatalogue

MAY 2014

EN_2014_CATALOGO_SICUREZZA.indd 1 12/06/14 14:59

2


5

INDEX

8 WIRED CONTROL UNITS

48 INPUTS


96 INPUTS


200 INPUTS

21 EXPANSION MODULES

22 RADIO CONTROL UNITS

99 INPUTS

28 WIRED KEYPADS

32 TRANSPONDER INSERTERS

36 MODULES FOR TELEPHONE DIALLERS

40 LAN CARDS

44 TOUCH SCREENS

50 WIRED DETECTORS

51 DETECTORS FOR INDOOR APPLICATION

57 DETECTORS FOR OUTDOOR APPLICATION

60 RADIO DEVICES

61 RECEIVERS

65 KEYPADS AND TRANSMITTERS

67 RADIO DETECTORS FOR INDOOR APPLICATION

70 EXTERNAL RADIO DETECTORS

77 RADIO SIRENS

80 WIRED SIRENS

84 POWER SUPPLY UNITS AND BATTERIES

85 ACCESSORIES


6


7

ANTI-INTRUSION SYSTEMS

While comfort is a priority in all modern homes, security of its inhabitants and of their property is essential.

Security from possible intrusions while at home and the ability to report danger to law enforcement are crucial

for living your home in a sound and peaceful manner.

The he¡ security system allows you to control access to every room of the house, to report danger to

designated telephone numbers and control the array of functions remotely via SMS. Moreover, thanks to the

terminal graphical interface, which shows the floor plan of the house and position of the alarm detectors,

using the alarm system is a simple and intuitive task even dealing with a vast and complex system.

The system also reports technical alarms from gas and water leak detectors to prevent any structural damage

to the building.

Home, people and property always safe!


8

WIRED CONTROL UNITS 48 INPUTS


9

002SCP8048

Intrusion alarm control unit with 48 inputs.

Intrusion alarm control unit with 8 wired inputs - expandable to 24

inputs (with 1 001SEXP8 expansion card and 1 001SMR8ICI remote

expansion modules, or 2 001SMR8ICI remote expansion modules);

4 outputs - expandable to 20 (with 2 001SMR8O4R expansion modules);

4 areas for system management. 24 radio inputs (with 001SRX128D radio

receiver). Built-in telephone dialler.

Dimensions:305 x 215 x 70 mm

DESCRIPTIONType 002SCP8048 - 002SCP8048TN - 002SCP8048TBPower supply (V - AC) 230 -15% + 10% 50/60 Hz

Power supply unit (A) 1

Transformer (VA) 20

Current draw (mA) 70 (excluding the battery charging)

Battery (Ah) 7.2

Casing material Metal

Dimensions (mm) 305x215x70

Weight (kg) 2.7 (without batteries)

Environmental class II

Compliance with Directives EN 50131-6, EN 50131-3 Grade 2

Directives EMC 2004/108/CE, 2006/95/CE

Operating temperature (°C) -10 ÷ +40

Storage temperature (°C) -10 ÷ +50

Relative humidity during operation (%) 75 without condensation

Relative humidity during storage (%) 75 without condensation


10

002SCP8048

Control unit with 48 inputs.

002SCP8048 is the "entry level" control unit of the he¡ intrusion alarm system range. Base features - 8 wired inputs, expandable to 24 using the

001SEXP8 expansion card with 8 inputs to install inside the control unit and 1 001SMR8ICI remote expansion module to install on the RS485 system

BUS line, or 2 001SMR8ICI modules. In addition, the BUS RS485 line can connect up to 4 keypads and 4 transponder readers. Connecting the

001SRX128D radio expansion module to the BUS line allows connection of 24 radio inputs for a total number of 48 radio + wired inputs. The control

unit has 4 on-board programmable outputs expandable to 20, connecting 2 001SMR8O4R remote expansion modules with 8 outputs on the BUS

line; allows management of 99 programmable user codes and 99 transponder keys.

The inputs can be grouped into 4 areas that can be configured individually. The area can be programmed to control its associated outputs, access

codes, keypads, readers and phone numbers.

An on-board PSTN telephone dialler transmits alarms in digital form. Adding the 001SGV64IT or 001SGV256IT text-to-speech module allows alert

transmission as voice message. The use of 001SIGSM module allows GSM transmission of alert as vocal message or alarm SMS. The bi-directional

combiner can be dialled from a remote telephone line via GSM or PSTN lines; when remotely connected to the equipment the system voice

guidance allows a series of control operations such as:

System status query

System activation and deactivation

Power supply and fuse status query

Event log query

Inputs query and inputs temporary exclusion

Output query and activation

The control unit also features SMS remote control. The control operations described can also be performed by specific SMS. When the operation is

performed the control unit sends a confirmation SMS.

Two interface cards for connecting the control unit to LAN are available. 001SSIP allows the control unit to communicate with a local PC connected

to the network or with a remote PC connected to the Internet. 001SIFLAN features an on-board web server and allows control unit connectivity from a

local PC or a remote PC connected to the internet using a standard web browser (e.g.: Internet Explorer).

The control unit card features a USB port that allows PC connectivity for programming operations by means of the SWLINK software. The program

allows configuration of all parameters, adopting 3 modes:

Easy (essential parameters)

Standard (commonly used parameters)

Advanced (all parameters available)

perfectly matching actual installation requirements.

002SCP8048 is the ideal solution for systems that require high performance and cost-effectiveness.


11

001SEXP8

001SIGSM

001SGV64IT

001SGV256IT

0

HUB OR SWITCH

REMOTE PC

LOCAL PC

LOCAL PC

INTERNET

001STDCSN

002SCP8048

009SSP400

001SLUNA

001STLCDS

001SINTS001SKEYT

Up to 4 transponder key inserters

Up to 4

keypadsRS485 LINE

PSTN LINE

LAN LINE

MODEM ROUTER ADSL

MODEM ROUTER ADSL

001SRX128DUp to 2 radio modules

001STX003WL

001SRC04WL

0

RS232 LINE

001STS550M

SIGSM

0000 2SCP

PS

001SIR215WL

001SIGSM

GSM LINE

Control SMS

and confirmation SMS

Voice alarm transmission and voice guide for

remote control.

NA

001SIFLAN OR 001SSIP

001SDT215

001SIR215

001SIFTS01

001SMR804RUp to 2 output expansion

modules

001SMR8ICI Up to 2 input

expansion modules


12

WIRED CONTROL UNITS 96 INPUTS


13

002SCP8096




expansion modules, or 5 001SMR8ICI remote expansion modules); 4

outputs - expandable to 44 (with 5 001SMR8O4R expansion modules); 8

areas for system management. 48 radio inputs (with 001SRX128D radio

receiver). Built-in telephone dialler.


DESCRIPTIONType 002SCP8096Power supply (V - AC) 230 -15% + 10% 50/60 Hz

Power supply unit (A) 1.5

Transformer (VA) 38

Current draw (mA) 70 (excluding the battery charging)

Battery (Ah) 7.2 / 15





Compliance with Directives EN 50131-6, EN 50131- 3 Grade 2







14

002SCP8096


002SCP8096 is the "mid range" control unit of the he¡ intrusion alarm system range. Base features - 8 wired inputs, expandable to 48 using the

001SEXP8 expansion card with 8 inputs to install inside the control unit and 4 001SMR8ICI remote expansion modules to install on the RS485 system


001SRX128D radio expansion module to the BUS line allows connection of 48 radio inputs for a total number of 96 radio + wired inputs.

The control unit has 4 on-board programmable outputs expandable to 44, connecting 5 001SMR8O4R expansion remote modules with 8 outputs on

the BUS line; allows management of 999 programmable user codes and 999 transponder keys.







System status query



Event log query














002SCP8096 is the ideal solution for home security systems that require all-around flexibility and expandability.


15

001SIGSM

001SGV64IT

001SGV256IT

001SIGSM

GSM LINE

Control SMS



remote control.

001SEXP80

HUB OR SWITCH

REMOTE PC

LOCAL PC

LOCAL PC

INTERNET

002SCP8096

009SSP400

001SLUNA

001SINTS001SKEYT


RS485 LINE

PSTN LINE

LAN LINE

Alarm transmissions in

digital and vocal form

MODEM ROUTER ADSL

MODEM ROUTER ADSL


001STX003WL0

RS232 LINE

001STS550M

001SIR215WL

NA


001SDT215

001SIR215

002

PS

A

d

001SIFTS01

001STLCDS

001SRC04WL

001SMR804R Up to 2 output expansion

modules


expansion modules

001STDCSN

Up to 8

keypads

15


16

16

WIRED CONTROL UNITS200 INPUTS

16


17

002SCP8200




expansion modules, or 15 001SMR8ICI remote expansion modules);

8 outputs - expandable to 128 (with 15 001SMR8O4R expansion

modules); 16 areas for system management.

72 radio inputs (with 001SRX128D radio receiver).

Built-in telephone dialler.


DESCRIPTIONType 002SCP8200Power supply (V - AC) 230 -15% + 10% 50/60 Hz


Transformer (VA) 52

Current draw (mA) 71 (excluding battery charging)

Battery (Ah) 15





Compliance with Directives EN 50131-6, EN 50131- 3 Grade 2







18

002SCP8200


002SCP8200 is the "top level" control unit of the he¡ intrusion alarm system range. Base features - 8 wired inputs, expandable to 128 using the

001SEXP8 expansion card with 8 inputs to install inside the control unit and 14 001SMR8ICI remote expansion modules to install on the RS485 system


001SRX128D radio expansion module to the BUS line allows connection of 72 radio inputs for a total number of 200 radio + wired inputs. The control

unit has 8 on-board programmable outputs expandable to 128, connecting 15 001SMR8O4R expansion remote modules with 8 outputs on the BUS

line; allows management of 999 programmable user codes and 999 transponder keys.







System status query



Event log query














002SCP8200 is the ideal solution for high-level home and industrial applications that requires access logic programmable to various areas of the plant.


19

001SIGSM

001SGV64IT

001SGV256IT

001SIGSM

GSM LINE

Control SMS



remote control

001SEXP80

HUB OR SWITCH

REMOTE PC

LOCAL PC

LOCAL PC

INTERNET

002SCP8200

009SSP400

001SLUNA

001SINTS001SKEYT

Up to 16 transponder key

inserters

RS485 LINE

RS485 LINE

PSTN LINE

LAN LINE



MODEM ROUTER ADSL

MODEM ROUTER ADSL


001STX003WL0

RS232 LINE

001STS550M

001SIR215WL

NA


001SDT215

001SIR215

002

001SIFTS01

001STLCDS

001SRC04WL

001SMR804R Up to 2 output expansion

modules


expansion modules

001STDCSN

Up to 16

keypads


20

Technical specifications and configuration table for the control units 002SCP8048, 002SCP8096, 002SCP8200.

DESCRIPTION

Type002SCP8048

002SCP8048TN - 002SCP8048TB002SCP8096

002SCP8096TN - 002SCP8096TB002SCP8200

002SCP8200TN - 002SCP8200TBBase inputs in control unit 8 8 8

Input expandability in control unit16 ( *1) 40 (*2) 120 (*3)

Remote inputs on bus

Radio inputs 24 48 72

Total inputs 48 96 200

Relay outputs in control unit 1 1 3

Programmable outputs in control unit 4 4 8

Remote programmable outputs on bus 16 40 120

Total programmable outputs 20 44 128

Areas 4 8 16

Scenarios 32 32 32

Outputs expansion module on bus 2 5 15

Concentration radio module on bus 2 8 16

Readers 4 8 16

Keypads (radio or wired) 4 (1 wired, 3 radio or wired) 8 (1 wired, 7 radio or wired) 16 (1 wired, 15 radio or wired)

Connection to touch screen terminals YES YES YES

Transponder keys 20 (99 with 001SGV256IT) 50 (999 with 001SGV256IT) 50 (999 with 001SGV256IT)

Installer codes 1 1 1

User codes 20 (99 with 001SGV256IT) 50 (999 with 001SGV256IT) 50 (999 with 001SGV256IT)

Transmitters 8 32 32

Time programmer Daily / Weekly Daily / Weekly Daily / Weekly

Event log 250 (999 with 001SGV256IT) 999 (9999 with 001SGV256IT) 999 (9999 with 001SGV256IT)

PSTN combiner YES YES YES

GSM combiner Optional (001SIGSM) Optional (001SIGSM) Optional (001SIGSM)

Speech-to-text Optional (001SGV64IT or 001SGV256IT) Optional (001SGV64IT or 001SGV256IT) Optional (001SGV64IT or 001SGV256IT)

Telephone numbers 8 16 16

CONTACT-ID protocol alarm transmission YES YES YES

Power supply units on bus (to be) 0 8 16

RS485 bus 1 1 2

USB communication port YES YES YES

LAN output Optional (001SIFLAN or 001SSIP) Optional (001SIFLAN or 001SSIP) Optional (001SIFLAN or 001SSIP)

Control from SMS YES (with 001SIGSM) YES (with 001SIGSM) YES (with 001SIGSM)

Remote control with voice guide YES (with 001SGV64IT or 001SGV256IT) YES (with 001SGV64IT or 001SGV256IT) YES (with 001SGV64IT or 001SGV256IT)

Remote programming and assistance via internet YES (with 001SIFLAN or 001SSIP) YES (with 001SIFLAN or 001SSIP) YES (with 001SIFLAN or 001SSIP)

RTC with buffer battery YES YES YES

( *1) The control unit manages 1 001SEXP8 expansion module of inputs to control unit and 1 001SMR8ICI remote expansion module of 8 inputs on

BUS, or 2 001SMR8ICI remote expansion modules.

( *2) The control unit manages 1 001SEXP8 expansion module of inputs to control unit and 4 001SMR8ICI remote expansion modules of 8 inputs on


( *3) The control unit manages 1 001SEXP8 expansion module of inputs to control unit and 14 001SMR8ICI remote expansion modules of 8 inputs on



21

001SEXP8

Expansion card for 8 inputs to control

unit.

Features 8 individually programmable inputs

for control units:

002SCP8048, 002SCP8096, 002SCP8200.


001SMR8ICI

Remote expansion module with 8 inputs.

Features 8 individually programmable inputs

for control units:

002SCP8048, 002SCP8096, 002SCP8200. With

plastic casing.

Connection on RS 485 4-cable bus.


001SMR8O4R

Remote expansion module with 8

outputs.

Features 8 outputs: 4 relay outputs with

NO-NC selectable contacts and 4 open

collector outputs, for control units:

002SCP8048, 002SCP8096, 002SCP8200. With

plastic casing.

Connection on RS485 4-cable bus.


DESCRIPTIONType 001SEXP8 001SMR8ICI 001SMR8O4R 001SRS485Power supply (V - DC) 12 ÷ 15

Connection to control unit Direct Via RS485 BUS

Current draw (mA) 20 40 50 40

Outputs - - 4 open collector outputs and 4 relay outputs -

Open collector output operation - - Closes to negative -

Open collector output current (mA) - - 50 -

Relay output operation - - NO or NC selectable by jumper -

Relay contact range - - 0.3 A 60 V AC - 1 A 30 V DC

Casing material - Plastic

Dimensions (mm) 37x63x23 22x90x55

Weight (g) 26 62 67


Compliance with Directives EN 50131- 3 Grade 2






001SRS485

RS485 Bus signal amplifier.

Recommended for long bus lines (> 400 m)

or with several branches.


EXPANSION MODULES


22

RADIO CONTROL UNITS99 INPUTS


23

002SCP6099WL

Intrusion alarm control unit with 99 radio inputs.

Intrusion alarm control unit with 99 radio inputs, 6 wired inputs; 4 wired

outputs; 8 areas for system management. Features capacitive keypad

with touch-sensitive keys and graphic display with system status

icons, transponder key reader, PSTN telephone dialler with text-to-

speech and indoor siren.

Voice commands for system management and control.


DESCRIPTIONType 002SCP6099WLPower supply (V - AC) 230 -15% + 10% 50/60 Hz


Transformer (VA) 17

Current draw (mA) 100 (excluding battery charging)

Battery (Ah) 2.2

Casing material ABS




Compliance with Directives R&TTE 99/05/CE, EN 50131-3, EN 50131-4, EN 50131-5-3, EN 50131-6 Grade 2






002SC

Intrusi

Intrusio

outputs

with tou

icons, t

speech

Voice c

Dimens300 x 2


24

002SCP6099WL

Control unit with radio 99 inputs.

002SCP6099WL is a control unit with 99 radio inputs, 6 wired inputs and 4 programmable outputs. Features an on-board capacitive keypad with

touch-sensitive keys and graphic display with icons, transponder key reader, PSTN telephone dialler with text-to-speech and indoor siren. The

system provides a RS485 bus line that allows wire connection of up to two keypads, two transponder inserters and two additional radio receivers

(can be used to improve system range). Manages up to 32 transmitters, 8 wireless keypads, 20 user codes and 20 transponder keys.

The control unit also features a voice guide, which, thanks to a series of system status/event voice messages, guides the user through system use

and management.

The radio and wired inputs can be grouped into 8 areas that can be configured individually. The area can be programmed to control its associated

outputs, access codes, keypads, readers and phone numbers.

The use of 001SIGSM module allows GSM transmission of alert as vocal message or alarm SMS. The bi-directional combiner can be dialled from

a remote telephone line via GSM or PSTN lines; when remotely connected to the equipment the system voice guidance allows a series of control

operations such as:

System status query



Event log query







local PC or a remote PC connected to the internet using a standard web browser (e.g.: Internet Explorer). Internet Explorer).






perfectly matching actual installation requirements. The control unit also features a remote device self-learning function that allows - in case of simple

installation - quick programming without a PC with the help of the voice guide.

002SCP6099WL combines professional features of the wired CP control units along with the ease of installation of a radio system; it is the perfect

solution for the protection of any environment without the need of invasive masonry works.


25

2525

001SIGSM

HUB OR SWITCH

REMOTE PC

LOCAL PC

LOCAL PC

INTERNET

002SCP6099WL

001SINTS001SKEYT


RS485 LINE PSTN LINE

LAN LINE



MODEM ROUTER ADSL

MODEM ROUTER ADSL


001STX003WL0

RS232 LINE

001STS550M

001SIR215WL

GSM LINE

Control SMS


Voice alert

transmission and

voice guide for remote

control


001SIFTS01

Up to 32 transmitters

001SIR215WL001STXW003WL

001SLUNA001SRC04WL

Up to 99

radio detectors

Up to 7

external keypads

either radio or wired

001STDCSN

001STDCSNWL001STDCSNW


26

Technical specifications and configuration table for the control unit002SCP6099WL.

DESCRIPTION

Type002SCP6099WL

Radio inputs 99

Wired inputs 6

Programmable outputs in control unit 4

Relay alarm output 1

Transponder reader on-board

Siren for indoor application on-board (100 db at 1 m)

Areas 8

Scenarios 32

Bus connectible readers 2

Radio or wired keypads 8 (1 on-board, 7 external - radio or wired)

Bus connectible additional receivers 2

Connection to touch screen terminals YES

Transponder keys 20

User codes 20

Transmitters 32

Time programmer Daily

Events 999

PSTN combiner on-board

GSM combiner Optional (001SIGSM module)

Speech-to-text On-board

Telephone numbers 8

CONTACT-ID protocol alarm transmission YES

RS485 bus 1

LAN output Optional (001SIFLAN or 001SSIP)

USB communication port YES

Control from SMS YES (with 001SIGSM)

Remote control with voice guide YES

Remote programming and assistance via internet YES (with 001SIFLAN or 001SSIP)

RTC with buffer battery YES


2727


28

WIRED

KEYPADS


29

001DC00VISIO01

Flush-mounting box for 001STDCSN and

001STDCSB keypads.

001STLCDS

Keypad.

Features rubber buttons and 32-character

liquid crystal display.

Fully backlit.

Wall-mountable. Can be used with all the CP

series control units.


001STDCSB

White capacitive keypad.

Features touch sensitive keys and graphic

display with system status icons.

Fully backlit.

Built-in transponder key reader. Wall- or

flush-mountable (with the 001DC00VISIO01

box). Features two on-board terminals which

can be programmed as inputs or outputs of

the connected control unit.

Can be used with all the CP series control

units.


001STDCSN

Black capacitive keypad.



Fully backlit.

Built-in transponder key reader. Wall- or

flush-mountable (with the 001DC00VISIO01

box). Features two on-board terminals which

can be programmed as inputs or outputs of

the connected control unit.

Can be used with all the CP series control

units.


DESCRIPTIONType 001STLCDS 001STDCSN - 001STDCSBPower supply (V - DC) 12 ÷ 15

Current draw (mA) 60

Graphic display NO YES

On-board inputs and outputs NO 2 terminals - programmable as inputs or outputs

Casing material ABS ABS


Weight (g) 204 326








LCDS

d


30

The 001STLCDFN and 001STLCDFB capacitive keypads are innovative concept devices. They feature ergonomic touch-sensitive buttons that simplify

control operations of the intruder alarm system. Furthermore, in addition to the traditional wall installation, they can also be flush-mounted thanks to

the thin design.

A particularly attractive design makes it a decorative element for any environment.

The keypads allow access to the following features:

Programming of the control unit

Programming parameters can be input into the control unit during installation (as opposed to using the SWLINK programming software).

Control operations

These operations allow system activation and deactivation in relation to areas set.

In addition, they allow consulting of event log.

Scenarios

You can program scenarios, meaning a series of actions to be done on areas and outputs, and to match them to the various keypads installed

in the system (e.g. "Night" scenario: inserting day-time area, perimeter area and outdoor area). The user can manage the system by simply

selecting the preferred scenario.

Inputs/Outputs

On board they feature two terminals that can be freely programmable as either control unit inputs or outputs, to which are connected (they

can be programmed and used to work as wired inputs or outputs as long as they respect the maximum number of wired inputs and outputs

available on the control unit, which does not vary with the addition of any keypads)

To cut consumption to a minimum, the keypads are activated and lighted via a sensor only when users are present and actually operating them.

The range is completed with the 001STLCDS LCD display keypad, from classical wall-installation and traditional silicone rubber buttons

Wall-installation Flush-mounting

34 mm 9 mm


31313131


32

TRANSPONDER

INSERTERS


33

DESCRIPTIONType 001SINTSPower supply (V - DC) 12 ÷ 15


Protection rating IP40

Casing material ABS

Dimensions (mm) 1 home series module

Weight (g) 30



Directives EMC 2004/108/CE, 2006/95/CE, R&TTE 99/05/CE





001SINTS

Transponder reader.

Allows control of the CP series control units

through the management of three scenarios

set in the control unit.

Can be housed in a hole cap of any flush-

mountable home series.

Works in set with 001SKEYT

Dimensions:1 home series module

001SKEYT

Transponder key.

High-security transponder key, BLUE.



34

The 001SKEYT transponder key and the 001SINTS inserter allow the control of the 002SCP8048, 002SCP8096, 002SCP8200, 002SCP6099WL control units

according to the following operating principles:

When programming it is possible to set the scenarios, i.e. a set of actions to be carried out on areas and outputs, and associate them to the various

readers.

The inserter allows the user to launch up to three scenarios and to turn off the system completely. The inserter has 4 LEDs: 3 refer to the

scenarios, while the fourth indicates system status.

The key is programmed with a factory code, having a 1 in 1,000,000 combinations, always transferred to the control unit memory during

programming.

Move the key towards the reader to launch the desired scenario among the three that the reader manages.

This innovative function greatly facilitates system control operations by simply selecting the desired scenario (e.g. Scenario - "Night": set for living,

perimeter, and outdoor areas).

The device was designed to be housed in a hole cap of any flush-mountable home series. Simply pierce the cap, with the aid of a special drilling

template provided in the kit, to fix the signalling LED support to it.

The control electronics, housed in an appropriate case, can be fixed to the inside of the flush-mounting box.

This makes the 001SINTS reader compatible with all the home automation series on the market today.


35

001SINTS001SKEYT

SCENARIO 1SCENARIO 3

SCENARIO 2SYSTEM STATUS


36

MODULES FOR

TELEPHONE

DIALLERS


37

001SANT10

Optional GSM antenna.

Complete with steel bracket and 10 m cable.

Dimensions:Height: 130 mm

001SGV64IT

Programmable voice control card.

Allows sending of alarm voice messages

over the PSTN network. User guide for

query and remote control operations of

system status. If the control unit features the

001SIGSM module, these functions can also

be performed on the GSM line.

It can be used with the control units:

002SCP8048, 002SCP8096, 002SCP8200.

001SGV256IT

Programmable voice control card.

Allows sending of alarm voice messages

over the PSTN network. User guide for

query and remote control operations of

system status. If the control unit features the

001SIGSM module, these functions can also

be performed on the GSM line.

It extends user codes, key codes and

number of memorizable events to the max

values provided for for each model of control

units of the CP series. It can be used with

the control units: 002SCP8048, 002SCP8096,

002SCP8200.


001SIGSM

GSM module.

Sends SMS, voice mail (when featuring the

001SGVxx card), receives SMS and DTMF

commands for remote control.

Includes a stylus antenna. Can be used with

all the CP series control units.


DESCRIPTIONType 001SGV64IT 001SGV256IT 001SIGSMPower supply (V - DC) 12 ÷ 15

Current draw (mA) 10 100

Memory (Mbit) 64 256 -


Weight (g) 3.7 38


Compliance with Directives EN 50131 - 3 Grade 2







38

The 002SCP8048, 002SCP8096, 002SCP8200 control units are provided with a built-in PSTN bi-directional combiner. This can transmit alert messages

in digital form with Contact ID protocol to security agencies. Adding the voice control board (001SGV64IT or 001SGV256IT) to the system enables the

following features:

Alert voice message transmission.

Aside from transmission via Contact-ID protocol, each alarm event can be associated to a voice message that is sent to programmed phone

numbers.

Guide for remote control operations.

The user can contact the control unit by phone to perform system control and query operations after entering a user code:

System status query



Event log query



The operations are guided by messages generated by the voice control card. A interesting feature is that the user can browse the event memory

after each event is reported by a voice message associated with the event.

All voice messages can be programmed with the innovative TTS (Text-To-Speech) feature which allows a text to vocal message conversion. The

messages will be written in the programming phase and reproduced from the voice control card.

The range includes two text-to-speech cards: 001SGV64IT with 64Mbit memory and 001SGV256IT with 256Mbit memory. These, according to memory

capacity, in addition to adding voice messages, expand the number of user codes, transponder key codes, and events that can be stored in

memory as reported in the "Control Unit technical specifications and configuration table".

The dialler can be completed with the 001SIGSM module which adds the following features to the system:

Alert voice message transmission. Alert voice message transmission. The voice alert messages can be transmitted over the PSTN and GSM lines

(if a 001SGV64IT or 001SGV256IT voice control card is installed). Priority can be assigned to one of the lines. In case of alarm, the dialler will use the

programmed line as a priority; In case of alarm, the dialler will use the programmed line as a priority, switching to the other in case of unavailability.

Alarm SMS. Aside from transmission via Contact-ID protocol, each alarm event can be associated to a voice message and to an SMS sent to

programmed phone numbers.

Control SMS. The system can be managed remotely via SMS A control SMS can be sent to the control unit which will perform the requested

action, sending back a confirmation SMS upon execution. SMS control actions allowed: system status query; System, areas and outputs

activation and deactivation; input query; temporary exclusion of the inputs; Output query; event request.

Guide for remote control operations. The remote control operations described above can also be performed through the GSM line.

Similarly, the 002SCP6099WL control unit is supplied with the built-in PSTN dialler and can be completed with the 001SGSM module in order to

integrate all above functions. The 002SCP6099WL control unit does not require the voice control card (001SGV64IT or 001SGV256IT) as it is built-into the

unit itself.

The CP series control units (fitted with the

001SGSM module) can be managed remotely

even via the HEI Security APP. This Android

app, has a guided menu for easily and

intuitively generating control SMSs, with all of

the security provided by the system.

It also allows you to view all of the SMSs

send to users from the control unit.


39

Transmission

with digital protocol

security monitoring agencies

Transmission

with digital protocol

security monitoring agencies

Control SMS


Control SMS


Voice alarm transmission and voice guide

for remote control.

Voice alarm transmission and voice guide

for remote control

Voice transmission of alarms

and voice guide for remote

control

Voice transmission of alarms

and voice guide for remote

control

001001100110011001100011

0001100011001100110011001

GSM line

GSM line

PSTN LINE

PSTN LINE

and c

PSSTN LI

002SCP8096

002SCP6099WL

001SIGSM

001SIGSM

001SGV64IT

001SGV256IT


40

LAN

CARDS


41

001SIFLAN

Interface with web server for CP series control units connection

to 10/100 BaseT Ethernet.

Remote connection to the control unit via PC running a Web Browser

over the Internet.


001SSIP

Interface for CP series control units connection to 10/100

BaseT Ethernet

Remote connection to the control unit via PC running the SWLINK

software using TCP/IP standard protocol.


DESCRIPTIONType 001SIFLAN 001SSIPPower supply (V - DC) 12 ÷ 15


Ethernet protocol TCP/IP 10/100 BaseT

Web server YES NO


Weight (g) 50









42

The 001SIFLAN and 001SSIP cards allow the connection of the 002SCP8048, 002SCP8096, 002SCP8200, 002SCP6099WL control units to a LAN and

Internet connectivity to a remote computer. The two cards enhance the control unit with the following features:

001SSIP LAN interface. Connects the control unit to the LAN so that it can communicate with devices on the network. The control unit can, for

example, communicate with a PC equipped with SWLINK software connected to the network. Similarly, a remote computer connected to the

Internet can connect with the control unit via the SWLINK software to perform remote programming and event log viewing.

001SIFLAN LAN interface with web server. Connects the control unit to the LAN so that it can communicate with devices on the network; unlike

the former, it features a web server. This allows you to connect to the control unit via a remote computer connected to the Internet using a

standard browser (e.g. Internet Explorer). This type of connection grants access to a dedicated control screen (a virtual keypad, as shown in the

figure, which allows interaction with the control unit). The SWLINK software can also be used remotely to perform the programming and event log

viewing.

The 001SIFLAN card features an on-board RS232 port for direct connection of a touch screen.

When this is installed in the control unit, the 001SIFTS01 interface is not used. Using the 001SSIP card does not exclude the possibility of connecting

a touch screen terminal to the control unit.


43

001SMR8ICI

HUB OR SWITCH

HUB OR SWITCH

001SIR215

MODEM ROUTER ADSL

MODEM ROUTER ADSL

MODEM ROUTER ADSL

ADSL MODEM ROUTER

REMOTE PC

REMOTE PC

INTERNET

INTERNET

RS485 LINE

002SCP8096

RS485 LINE

002SCP809696

RREMOEMOTETE PPCC

RREMOEMOTETE PPCC

001SIFLAN

001SSIP

001SIFLAN

001SSIP

002SCP6099WL

RS232 LINE

RS232 LINE

001STS550M

001STS550M

001STDCSN


44

TOUCH

SCREENS


45

002STS550M

5.5" monochrome touch screen terminal.

With monochrome blue backlit display.

320 x 240 resolution.

It allows the management of the intrusion alarm via customizable

graphical maps.

Connectable to all CP series control units with the 001SIFTS01 interface.

Customise with frame and flush-mounting box.

With programming software.

Flush-mounting boxes: 001STSBOX04 - Plastic flush-mounting box for 002ST550M terminal and

frame: 001SCX550A, 001SCX550B, 001SCX550N and 001SCX550X.

001STSBOX05 - Steel flush-mounting box for 002ST550M terminal and

frame: 001SCF550A, 001SCF550B, 001SCF550N, 001SCF550X.

DESCRIPTIONType 002STS550MPower supply (V - DC) 12 ÷ 26

Current draw (mA) 150 max

Sensitive area (") 5.5

Resolution (pixel) 320x240


Weight (g) 350









46

The 002STS550M touch screen terminal allows the supervision and control of the alarm system. Installation of one or more 002STS550M touch screen

terminals in a security system means having the set of features described below, allowing visual control of the system:

Virtual keypad. The 002STS550M monochrome terminal allows control of CP series control units via a virtual keypad that allows system engage/

disengage and the launch of programmed scenarios.

Graphical maps. The terminal allows visual system control. It can be programmed so that the main page displays the general layout of the house.

Selecting one of the environments will call up, in the form of touch sensitive icons, the security detectors installed on the premises. An active alert

will highlight the alarm triggered.

The terminal is connected to CP series control units through its 001SIFTS01 interface. Other terminals (up to 8) can be connected using the

appropriate link.

The 002STS550M terminal, if implemented with the 001SDOMO2 software also allows, in addition to the control of the intrusion alarm system,

connection to the home automation system.

VIRTUAL KEYPAD

GRAPHICAL MAPS


47

RS232 LINE

230 V AC

002SCP8096

002STS550M 002STS550M 002STS550M

ADDITIONAL POWER SUPPLY UNITNIT

0002S2SCPCP80809696

Up to 8

touch screens

001SIFTS01


48

The 002STS550M graphic terminal can be installed in two different ways:

standard installation, i.e.: approx. 20 mm wall protrusion. It is carried out using the 001STSBOX04 flush-mounting box and a type 001SCX550A frame.

low profile installation, i.e.: approx. 5 mm wall protrusion. It is carried out using the 001STSBOX05 flush-mounting box and a type 001SCX550A frame.

The frames are decorative elements available in three colours: silver, black and white. All the frames are

customizable upon request, with a RAL® colour. This allows harmonious integration into any ambience. To

order a special frame, use the service codes listed below, adding the code of the desired RAL colour.

Example: RAL3020 colour for 001STS550M low profile frame: 001SCF550RAL3020

RAL COLOURS

RAL 1007RAL 1006RAL 1005RAL 1004RAL 1003RAL 1002RAL 1001RAL 1000























21 mm

X04 flush-mounting box and a type 001SCX550

X05 flush-mounting box and a type 001SCX550

8 mm

Standard Installation with

001STSBOX04

and 001SCX550A

Low-profile installation

with stainless steel

001STSBOX05

and 001SCF550A

NOTE: The company reserves the unilateral right not to accept colour customization requests.


49

001SCF550A

Low-profile silver plexiglass frame for 002STS550M

To use with 001STSBOX05 flush-mounting box.

Available colours: 001SCF550A - silver

001SCF550B - white

001SCF550N - black

001SCF550X - RAL on request


001SCX550A

Silver plexiglass frame for 002STS550M

To use with 001STSBOX04

Available colours:001SCX550A - silver

001SCX550B - white

001SCX550N - black

001SCX550X - RAL on request



50

WIRED DETECTORS


51

001SIR215

Volumetric passive infrared detector with low absorption.

Range: 15 m - opening: 141°. Supplied with joint.


001SDT215

Double technology volumetric detector

with low absorption.



DESCRIPTIONType 001SIR215 001SDT215Power supply (V - DC) 9 ÷ 16


Alarm contact range (mA/V) 50/24

Tamper contact range (mA/V) 100/24

Coverage (m/°) 15/141

Casing material ABS

Joint Supplied


Weight (g) 85 (without joint) 95 (with joint)


Compliance with Directives EN 50131-2-2 Grade 2 EN 50131-2-2, EN 50131-2-3, EN 50131-2-4, Grade 2

Directives EMC 2004/108/CE, 2006/95/CE, R&TTE 99/05/CE (only for 001SDT2115)





INDOOR DETECTORS


52

001SIR215 is a passive infrared volumetric motion detector with low absorption suitable for indoor installation.

You can adjust the sensitivity of the detector via special trimmer in order to obtain an optimal coverage of the environment.

001SDT215 is a passive infrared volumetric motion detector with low absorption suitable for indoor installation. It uses two detection technologies: a

dual element pyroelectric sensor with passive infrared rays (PIR) and microwave (MW) sensor with patch antenna. The dedicated jumper allows you

to select the AND or OR operating mode of the two detection areas; The detector signals the alarm status when both sections have an alarm active,

if the jumper is in the AND position. Otherwise, if the jumper is in OR, the detector will trigger the alarm status when only one of the two sections has

an alarm active. You can adjust the sensitivity of both sections via special trimmer in order to obtain an optimal coverage of the environment.

001SIR215 - 001SDT215

19.5° 19.5°

15 m1.7 m

2.1 m


53

001SIR310



001SIR310PT


Immunity to pets weighing less than 20 kg.



001SSND01

Joint for volumetric detectors.

To use with: 001SIR308DC,

001SDT311PT, 001SDT315,

001SDT315AM, 001SDT325.

DESCRIPTIONType 001SIR310 001SIR310PT 001SDT315 001SDT315AM 001SDT325 001SDT311PTPower supply (V - DC) 9 ÷ 16




Immunity to pets (kg) No 20 No 20Coverage (m/°) 10/110 8/110 16/110 18/110 25/83 16/110

Casing material ABS

Joint Supplied Optional (001SSND01)


Weight (g) 90 130


Compliance with Directives EN 50131-2-2 Grade 2 EN 50131-2-4 Grade 2

Directives EMC 2004/108/CE, 2006/95/CE EMC 2004/108/CE, 2006/95/CE, R&TTE 99/05/CE





001SDT315

Low-absorption double-technology volumetric detector.

Range: 16 m - opening: 110°.

001SDT311PT

Low-absorption double-technology volumetric detector.

Immunity to pets weighing less than 20 kg.


001SDT315AM

Double-technology volumetric detector with low absorption.

Passive infrared + planar microwave with anti-masking

function.


001SDT325

low-absorption double-technology volumetric detector.




54

001SIR310 is a passive infrared volumetric motion detector with low absorption suitable for indoor installation. It uses a pyroelectric sensor with

passive infrared rays (PIR). In order to ensure high reliability at high temperatures, it is equipped with a special temperature compensation circuit. To

avoid false alarms, the number of detections required to trip the alarm can be adjusted.

001SIR310PT is a passive infrared volumetric motion detector with low absorption suitable for indoor environments with pets. 001SIR310, it features

a special circuit that evaluates the physical mass of the body detected by avoiding to alarm tripping if an animal weighing less than 20 kg passes

through the protected area.

001SDT315, 001SDT311PT, 001SDT315AM, 001SDT325, are volumetric motion detectors with low absorption suitable for indoor installation. Using two

detection technologies: a dual element pyroelectric sensor with passive infrared rays (PIR) and microwave (MW) sensor with patch antenna. The

functioning of the two section is of the AND type. In order to ensure high reliability at high temperatures, it is equipped with a special temperature

compensation circuit. To avoid false alarms, microwave sensitivity can be adjusted. They have the following features:

001SDT311PT features a special circuit that evaluates the physical mass of the body detected avoiding alarm tripping if an animal weighing less

than 20 kg passes through the protected area.

001SDT315AM has a separate circuit able to report any masking attempts.

001SDT325 allows to cover large areas due to the range of 25 m.

001SIR301 - 001SIR310PT

35° 35°

top view

10 m0.4 m

side view

001SSDT311PT - 001SDT315

35° 35°

top view

10/16 m 10/18 m 10/18 m0.4 m 0.4 m 0.4 m

side view

001SSDT315AM

35° 35°

top view

side view

001SSDT325

48° 48°

top view

side view

2 m 2.5 m 2.5 m 23 m

2.5 m 2.5 m 2.5 m 2.2 m


55

001SIR308DC


Curtain effect coverage. Range: 8 m - opening: 90°.


001SIR304C

Ceiling mounted volumetric passive infrared detector with low

absorption.

Coverage: installed at a height of 4 m has a ground diameter of 13 m;

installed at a height of 6.8 m has a ground diameter of 17 m.

Dimensions:Ø 110 x 22 mm

001SDT306C

Ceiling mounted, double-technology volumetric detector with

low absorption.

Coverage: installed at a height of 2.8 m has a ground diameter of 8 m;

installed at a height of 4.5 m has a ground diameter of 13 m.

Dimensions:Ø 130 x 26 mm

001SVS309

Vibration detector.

Wall and window security application.

Detects vibrations caused by impacts or attempts at breaking and

entering.


DESCRIPTIONType 001SIR304C 001SDT306C 001SIR308DC 001SVS309Power supply (V - DC) 9 ÷ 16

Current draw (mA) 15 25 15 11



Coverage (m/°) - 8/170 -

Coverage (Ø/h) 13/4 -

Casing material ABS

Joint - Optional (001SSND01) -

Dimensions (mm) Ø 110x22 Ø 130x26 95x65x35 85x26x25

Weight (g) 78 146 58 36


Compliance with Directives EN 50131-2-2 Grade 2 EN 50131-2-4 Grade 2 EN 50131-2-2 Grade 2 EN 50131-2-7-1 Grade 2

Directives EMC 2004/108/CE, 2006/95/CE, R&TTE 99/05/CE (only for 001SDT306C)






56

001SIR308DC

5° 5°

top view

8 m

0.75 m

side viewtop viewtop view

001SIR304C

2.8 m 2.8 m

0 0

4 m 6 m

100° 100°

front view front view

001SIR306C

001SIR304C and 001SDT306C are low-absorption volumetric motion detectors for indoor use. When installed on the ceiling allows a 360° coverage. In

order to ensure high reliability at high temperatures, it is equipped with a special temperature compensation circuit.

They have the following features:

001SIR304C. It uses a dual element pyroelectric sensor with passive infrared rays (PIR). To avoid false alarms, the number of detections required to

trip the alarm can be adjusted.

001SDT306C. It uses two detection technologies: a dual element pyroelectric sensor with passive infrared rays (PIR) and microwave (MW) sensor

with patch antenna. The functioning of the two section is of the AND type.

To avoid false alarms, microwave sensitivity and the number of detections required to trip the alarm can be adjusted.

001SIR308DC is a volumetric motion detector with low absorption suitable for indoor installation with curtain effect coverage for the protection of

doors and windows. It uses a dual element pyroelectric sensor with passive infrared rays (PIR). Wall or ceiling installable. It features a circuit for

determining transit direction. The user can move freely inside the house while the intruder from outside is regularly detected. In order to ensure high

reliability at high temperatures, it is equipped with a special temperature compensation circuit.

001SVS309 is a vibration detector to be installed to protect doors and windows. Suitably positioned in the point to be protected, it detects vibrations

arising from attempts of breaking and entering.

Alarm trip sensitivity can be adjusted via an on-board trimmer.

7 m 8 m

12 m 17 m

001SV309


5757

001SIRCE

Outdoor radio-based passive infrared curtain effect detector,

with anti-masking and pet-immune features.


Dimensions:35 x 155 x 42.5 mm

001SDTE

Double technology outdoor volumetric detector.



DESCRIPTIONType 001SIRCE 001SDTEPower supply (V CA) 9.5 ÷ 18 8 ÷ 14


Alarm contact range (mA/V) 100/28 500/12

Tamper contact range (mA/V) 100/28 500/12

Coverage (m/°) 5/10 18/80

Casing material ABS

Dimensions (mm) 35x155x42.5 190x85x75

Weight (g) 100 332

Protection rating IP55 IP54

Directives EMC 2004/108/CE, 2006/95/CE EMC 2004/108/CE, 2006/95/CE, R&TTE 99/05/CE

Operating temperature (°C) -20 ÷ +60 -40 ÷ +70


Relative humidity during operation (%) 95 Without condensation


001STADTE

Bracket for installing to the post the 001SDTE and 001SDTEWL

detectors.

OUTDOOR DETECTORS


58

The 001SIRCE is an outdoor curtain-effect motion detector. It uses a dual pyroelectric sensor with passive infrared rays (PIR).

The IP55 protection rating and the guaranteed operating temperature (-20° ÷ +60°) make it suitable for outdoor walls and balconies. It comes with

the anti-masking feature that automatically triggers the alarm in case the device is masked for over three consecutive minutes.

A sophisticated signal processing logic optimizes the detection sensitivity. Every movement is analyzed in detail before triggering the alarm. This

prevents false alarms or missed detections making the device immune to environmental and small pet disturbances.

Thanks to it special mechanical structure the curtain effect coverage area may be adjusted from two to five meters and rotated along a 190° arc to

avoid unwanted detections.

The 001SDTE is an outdoor motion detector made with two detection heads, one is passive infrared and the other microwave with planar antenna,

each can be oriented to provide the most effective coverage.

The special mechanical structure complete with small roof, the IP54 protection rating and the guaranteed operation temperature (-40° ÷ +70°) make

it particularly suitable for protecting outdoor walls, balconies and outdoor onto-pole installations.

The maximum range of 18 m may be adjusted via special trimmers (one per head) so as to have an optimal coverage depending on the setting you

wish to protect. Properly orienting the head also helps avoid alarms and ensures immunity from small household pets.

Is supplied with lens cover in plastic, installable on the passive infrared detection head to obtain a curtain effect coverage area. It can be used to

further optimize detection and reduce to a minimum any chance of erroneous alarms.

top view

95° 95°

190°

0.8

0.8

0 1 2 3 4 5 m

1.0

1.0

1.2

1.2

001SIRCE001SIRCE

top view

80°

12 m

0

20 m

12 m0 2 4 6 8 10 20 m

001SDTE001SDTE

2.5

m

Alarm

No alarm


59


60

RADIO

DEVICES


61

DESCRIPTIONType 001SRX128DPower supply (V - DC) 12 ÷ 15

Current draw (mA) 100 max

Modulation type GFSK

Radio transmission (MHz) 868.65 dual band and bidirectional 433.92

Communication with the control unit via RS485 BU

Address selection by means of 4 DIPs

Casing material ABS


Weight (g) 60


Compliance with Directives EN 50131-5-3 Grade 2






001SRX128D

Supervised DualBand Radio Receiver.

Works on frequencies of 868.65 and 433.92 MHz (the number of

programmable inputs varies in relation to CP series control unit.


RECEIVERS


62

The 001SRX128D radio receiver allows the 002SCP8048, 002SCP8096, 002SCP8200 control units, to manage all of radio devices (volumetric detectors,

perimeter detectors, transmitters, keypads and radio sirens) and thus to use the radio inputs with which the control units are equipped.

001SRX128D, connected on the RS485 BUS line as expansion module, allows for two-way dialogue between wireless devices and the control unit.

A single 001SRX128D radio receiver is enough to communicate with all devices that the control units can respectively control.

As indicated in the block diagram shown below, additional 001SRX128D modules can be connected to the RS485 line in order to improve

communication. Protection of large areas and environments where radio signal is weak or disrupted are examples that hint at necessary installation

of additional 001SRX128D radio receivers. The number of radio devices that may be used and the number of modules that can be connected to the

RS485 line depends on the control unit used:

01SRX128D incorporates a LED field meter that allows the evaluation of the incoming signal to use during installation.

Control unit 001STHB004WL transmitters Radio inputs Connectible 001SRX128D modules002SCP8048 8 24 2

002SCP8096 32 48 8

002SCP8200 32 72 16

It can also be employed with the 001CP6099WL control unit (maximum 2 units) in order to improve the radio range of the system.


63

RS485 LINE

001SMR804R

001STXW003WL

001STXW003WL

001STHB004WL

001SIR215WL

001SIR215WL

001SMR804R

001SRX128D

001SRX128D

001SRC04WL

01STXW003WL

01STXW003WL

RS485 LINE

002SCP8096

001SLUNAWL

001STDCSN

001STDCSNWL001STDCSNW


6464


65

KEYPADS AND TRANSMITTERS

DESCRIPTIONType 001STDCSNWL - 001STDCSBWL 001STHB004WL 001SRC04WLPower supply (V - DC) CR123A lithium battery (no. 3) CR2450 lithium battery (no. 1) CR2032 lithium battery (no. 1)

Battery life (months) 24


Radio transmission (MHz) 868.65 dual band and bidirectional 433.92 868.65 mono-band bidirectional

Casing material PLEXIGLASS ABS ABS

Dimensions (mm) 158x138x31 110x40x14 38x76x9

Weight (g) - 60 27


Compliance with Directives EN 50131-5-3 Grade 2






001STDCSBWL

Radio capacitive keypad - white.



Fully backlit.

Built-in transponder key reader.

Wall-installation.


001STDCSNWL

Radio capacitive keypad - black.



Fully backlit.

Built-in transponder key reader.

Wall-installation.


001SRC04WL

Transmitter.

Allows control of CP series control units.

Features 4 buttons and 4 LEDs to activate

3 scenarios programmed in the control unit.

Displays system and activated scenario

status.


Notes:

001STDCSNWL, 001STDCSBWL, 001STHB004WL

001SRC04WL can be used with the

002SCP6099WL radio control unit and with the

002SCP8048, 002SCP8096, 002SCP8200 control

units featuring the 001SRX128D receiver.

001STHB004WL

Transmitters

Allows control of CP series control units. Features

4 buttons and 9 two-colour LEDs to activate

16 scenarios programmed in the control unit.

Displays system and activated scenario

status.



66

001STDCSNWL are 001STDCSBWL the system radio keypads. Made with ergonomic touch capacitive keys, on board they feature a graphic display

with system status icons and a transponder-based key reader. In order to reduce power consumption to a minimum and ensure long battery life, the

keypads are activated via sensor only when the operator is in front of it.

They feature two-way communication with the control unit with modes similar to the detectors, also supervised in the same manner.

You can use it with the 002SCP6099WL radio contro unit and with the 002SCP8048, 002SCP8096, 002SCP8200 control units with the 001SRX128D

Control unit management is performed via two types of bidirectional transmitters: 001STHB004WL and 001SRC04WL.

001STHB004WL with 9 LEDs on board allows the launch of 16 scenarios programmed in the control unit and provides feedback on system status and

activated scenario. Similarly 001SRC04WL with 4 LEDs on board allows the management of 4 scenarios. You can use it with the 002SCP6099WL radio

contro unit and with the 002SCP8048, 002SCP8096, 002SCP8200 control units with the 001SRX128D radio receiver.

The radio range in open air and in the total absence of band noise is about 200 m for the keypads and 100 m for the transmitters. Range may be

greatly decreased indoors due to the position in relation to the structure of the environment and / or noise on the radio band.


67

DESCRIPTIONType 001SIR215WL 001STXW003WL - 001STXB003WLPower supply (V - DC) 3V6 1/2AA lithium battery

Battery life (months) 24 36



Casing material ABS


Weight (g) 100 80


Compliance with Directives EN 50131-2-2, EN 50131-5-3 Grade 2 EN 50131-2-6, EN 50131-5-3 Grade 2






001STXW003WL

White perimeter radio detector.

Window and door security application. In

addition to alarm signal transmission, it

allows signal transmission of two on-board

inputs.

Dimensions: 28 x 95 x 28 mm

001STXB003WL

BROWN PERIMETER RADIO

detector.

Window and door security application. In

addition to alarm signal transmission, it

allows signal transmission of two on-board

inputs.


001SIR215WL

Radio volumetric detector.

Features the sensibility adjustment and the

impulse-counter. Range: 15 m - opening:

141°. Supplied with joint.


RADIO DETECTORS FOR INDOOR APPLICATION

Notes:

001SIR215WL, 001STXW003WL, 001STXB003WL

can be used with the 002SCP6099WL radio

control unit and with the 002SCP8048,

002SCP8096, 002SCP8200 control units

featuring the 001SRX128D receiver.

67


68

001STXW003WL and 001STXB003WL are radio perimeter devices with built-in transmitter, suitable for indoor installation to protect doors and windows.

You can use it with the 002SCP6099WL radio contro unit and with the 002SCP8048, 002SCP8096, 002SCP8200 control units with the 001SRX128D radio

receiver. A magnetic contact (reed switch) is internally housed, which is actuated by an external magnet that is included in the supply.

The magnet, with a special support, must be installed on the door or window to be protected, while the detector mounts on the door or window

frame.

Moving the magnet from the detector generates an alarm signal which is transmitted to the control unit.

They convey the state of the reed switch and the status of the two auxiliary inputs, on separate channels so that they can be individually identified by

the control unit. The tampering alarm is transmitted allowing precise identification.

In addition, it features two inputs for connection to external detection devices. The inputs can be provided, during programming, for connection to

standard magnetic switches or shutter motion detectors (or vibration detectors).

If the input is programmed for the connection of a magnetic contact, the radio device will broadcast the On / Off status of the contact. Programming

the input for connection of a shutter motion detector (or vibration detector), the alarm will be sent upon a number of predetermined number of

pulses.

001SIR215WL is a passive infrared volumetric motion detector with built-in radio transmitter suitable for indoor installation. You can use it with the

002SCP6099WL radio control unit and with the 002SCP8048, 002SCP8096, 002SCP8200 control units with the 001SRX128D radio receiver. The device

transmits the intrusion alarm, the tampering alarm and the supervision.

The coverage area and the installation position are similar to those described for the 001SIR215 detector. In order to obtain maximum safety, the radio

devices are bi-directional Dual Band (868 Mhz and 433 Mhz).

In case of alarm, the detector transmits the signal to the receiver over a 868 Mhz band, the receiver sends a confirmation feedback of reception to

the detector.

If the detector does not receive the feedback signal, it transmits the signal a second time over the 433 Mhz band.

The system is also of the supervised type as all detectors transmit, at regular time intervals, the occupancy control signal; a fault/alarm will be

generated if the control unit does not receive feedback within a pre-set time limit. The detectors also transmits the battery status signal that can be

viewed from the control unit.

The radio range is about 200 m in open air and in the total absence of band noise. Range may be greatly decreased indoors due to the position in

relation to the structure of the environment and / or noise on the radio band.


69


70

EXTERNAL RADIO

DETECTORS


71

001SDTCLWL

Radio-based curtain effect double

technology detector.

Range: 3 m - opening: 28°..


DESCRIPTIONType 001SDTCLWLPower supply (V - DC) CR123A lithium battery (no.2)




Coverage (m/°) 3/28

Casing material ABS


Weight (g) 202






Notes:

001SDTCLWL can be used with the

002SCP6099WL radio control unit and with the

002SCP8048, 002SCP8096, 002SCP8200 wired

units featuring the 001SRX128D receiver.


72

001SDTCLWL is a curtain effect motion detector for protecting doors and windows, and has a built in radio transmitter. It uses a dual element

pyroelectric sensor with passive infrared rays (PIR) and microwave (MW) sensor with patch antenna. The functioning of the two section is of the AND

type.

The guaranteed operating temperature (-40° ÷ +70°) and the coverage area make especially suitable for installing in outdoor protected areas (near

doors and windows) especially large sized ones.

The range can be adjusted, via dip switch, to 1.2 m for protecting a window or to 3 m for protecting a door.

001SDTCLWL can be used with the 002SCP6099WL radio control unit and with the 002SCP8048, 002SCP8096, 002SCP8200 wired control units featuring

the 001SRX128D receiver.



001SDTCLWL (short range)001SDTCLWL (long range)

0.31.5

3

meters

0.2

0.8

1.2

meters


73

001SDTEWL

Radio-based double technology outdoor volumetric detector.

Range:18 m - opening 80°.


001SIRCEWL

Outdoor radio-based passive infrared curtain effect detector,

with anti-masking and pet-immune features.


Dimensions:35 x 155 x 42.5 mm (single module)

DESCRIPTIONType 001SIRCEWL 001SDTEWLPower supply (V - DC) CR123A lithium battery (no.2)




Coverage (m/°) 5/5 18/80

Casing material ABS

Dimensions (mm) 35x155x42.5 (single module) 190x85x75

Weight (g) 190 (two modules) 332







001STADTE

Bracket for installing to the post the 001SDTE and 001SDTEWL

detectors.

Notes:

001SIRCEWL, 001SDTEWL can be used with

the 002SCP6099WL radio control unit and with

the 002SCP8048, 002SCP8096, 002SCP8200

control units featuring the 001SRX128D

receiver.


74

The 001SDTEWL is an outdoor motion detector, with built in transmitter, made with two detection heads, one is passive infrared and the other

microwave with planar antenna, and each one can be oriented for best coverage. The special mechanical structure complete with small roof, the

IP54 protection rating and the guaranteed operation temperature (-40° ÷ +70°) make it particularly suitable for protecting outdoor walls, balconies

and outdoor onto-pole installations.

The maximum range of 18 m may be adjusted via special trimmers (one per head) so as to have an optimal coverage depending on the setting you

wish to protect. Properly orienting the head also helps avoid alarms and ensures immunity from small household pets.

Is supplied with lens cover in plastic, installable on the passive infrared detection head to obtain a curtain effect coverage area. It can be used to

further optimize detection and reduce to a minimum any chance of erroneous alarms.

001SIRCEWL and 001SDTEWL can be used eith the 002SCP6099WL radio control unit and with the 002SCP8048, 002SCP8096, 002SCP8200 control

units featuring the 001SRX128D receiver. The radio range is about 200 m in open air and in the total absence of band noise. Range may be greatly

decreased indoors due to the position in relation to the structure of the environment and / or noise on the radio band.

The 001SIRCEWL is an outdoor curtain-effect motion detector with built in transmitter. It uses a dual pyroelectric sensor with passive infrared rays

(PIR). The IP55 protection rating and the guaranteed operating temperature (-20° ÷ +60°) make it suitable for outdoor walls and balconies. It comes

with the anti-masking feature that automatically triggers the alarm in case the device is masked for over three consecutive minutes.

A sophisticated signal processing logic optimizes the detection sensitivity. Every movement is analyzed in detail before triggering the alarm. This

prevents false alarms or missed detections making the device immune to environmental and small pet disturbances.

Thanks to it special mechanical structure the curtain effect coverage area may be adjusted from two to five meters and rotated along a 190° arc to

avoid unwanted detections.

top view

95° 95°

190°

0.8

0.8

0 1 2 3 4 5 m

1.0

1.0

1.2

1.2

001SIRCEWL001SIRCEWL

top view

80°

12 m

0

20 m

12 m0 2 4 6 8 10 20 m

001SDTEWL001SDTEWL

2.5

m

Alarm

No alarm


75


76777676767776767666667676667667767676767667676666666667676766666666666767666666666666667666666666666666666666666776666666666676666666666666666666666666


77

001SLUNAWL

Self-powered radio siren for outdoor use

with ABS case and LED flashing light.

Flashing light system status signal.

Antifoam active with signals to control unit.

You can use it with the 001SCP6099WL

radio contro unit and with the 002SCP8048,

002SCP8096, 002SCP8200 control units with

the 001SRX128D radio receiver.


RADIO SIRENS

DESCRIPTIONType 001SLUNAWLPower supply (V - DC) -




Casing material ABS


Weight (g) -

Environmental class III

Compliance with Directives EN 50131-4, EN 50131-5-3 Grade 2







78

The range of wireless devices is completed by the 001SLUNAWL siren. Made of ABS plastic casing, the siren features an on-board LED flashing light

for signalling the alarm and system status at system engagement/disengagement. It features active antifoam control with alarm signalling to the

control unit. This device too is of the supervised type and communicates in a two-ways mode with the control unit. The mode is similar to that of

radio detectors.

You can use it with the 002SCP6099WL radio contro unit and with the 002SCP8048, 002SCP8096, 002SCP8200 control nits with the 001SRX128D radio

receiver.




79

001SIR215WL

001STHB004WL

001SCP6099WL

001SRC04WL

001STXW003WL00001S1STXW0

SHUTTER MOVEMENT DETECTOR (OR VIBRATION

DETECTION)

MAGNETIC CONTACT

001SLUNAWL

001STDCSNWL

001SDTCLWL

001SIRCEWL

79


80

WIRED

SIRENS


81

001SLUNA

Self-powered radio siren for outdoor use with ABS case and

orange LED flashing light.

Independent input for controlling the flashing light to warn about the

system status.

Antifoam active with contact output.

To use with 001SBAT2 12V/2,2Ah battery.


001SLUNALG

Self-powered outdoor siren with ABS container and grey LED

flashing light.

Independent input for controlling the flashing light to warn about the

system status.

Antifoam active with contact output.

To use with 001SBAT2 12V/2,2Ah battery.


009SSP400

Piezoelectric indoor siren.

Plastic wall-mounting casing.


DESCRIPTIONType 001SLUNA - 001SLUNALG 009SSP400Power supply (V - DC) 12 ÷ 15

Current draw at rest (mA) 30 -

Current draw in alarm mode (mA) 1500 90

Sound pressure level (db) 110 to 1 m 80 to 1 m

Alarm response time (") from 120 to 600 selectable by jumper -

Battery (V/Ah) 12 / 2.2 -


Anti-foam protection Active and galvanized sheet metal -

Casing material ABS


Weight (g) 2500 (without batteries) 131 (without batteries)

Environmental class III II

Compliance with Directives EN 50131-4 Grade 2



Storage temperature (°C) -25 ÷ +50 -10 ÷ +50




82

001SLUNA is a self-powered siren with flashing light for outdoor installation. The ABS case contains two antifoam protections:

the first is constituted by a suitable metal screen able to protect the electronics and the sound system,

the second is comprised of a sensor capable of generating, if requested by the foaming material, a tamper alarm output.

The flashing light comprises two groups of high-efficiency LEDs that guarantee a practically unlimited service life and allow standard maintenance

operations for replacing the lamp to be avoided. The two sections of the flashing light can be controlled from the input of the alarm siren as well as

separately via two dedicated inputs.

This allows to use the flashing light, not only for the alarm signalling, but also for auxiliary signals sent by the control unit (e.g. system status).

001SLUNA offers protection against removal, against opening and siren block function to be used during installation or maintenance.

The operation is determined by a series of dip-switches mounted directly onto the card.

CONNECTOR FOR BATTERY CABLES AND CONE

TEAR-RESISTANCE AND ANTIFOAM SWITCH

TAMPERING PROTECTION SWITCH

CONNECTORS FOR LED SIGNALLING LIGHTS

DIP-SWITCH

POWER SUPPLY AND ACCESSORIES TERMINAL BLOCK

BOARD PROTECTION FUSE F 3.15 A

BATTERY POLARITY REVERSE PROTECTION FUSE F 3.15 A

SIGNALLING LED


8383


84

POWER SUPPLY UNITS AND BATTERIES

001SALS15

Supervised 1.5 A auxiliary

power supply unit.

Connected over the system bus it warns the

control unit of its own working status.

Legal conformity:

EN 50131-6 grade 2 environmental class II.

001SALS30

Supervised 3 A auxiliary

power supply unit.

Connected over the system bus it warns the

control unit of its own working status.

Legal conformity:

EN 50131-6 grade 2 environmental class II.

001SBAT2

Rechargeable lead-based battery.

Hermetic, 12 V - 2.2 Ah.

001SBAT7


Hermetic, 12 V - 7.2 Ah.

001SBAT15


Hermetic, 12 V - 15 Ah.

SUPERVISED POWER SUPPLY UNITS

The 001SALS15 and 001SALS30 supervised power supply units are ideal when auxiliary power supply is required, especially in systems in which the

control units are fitted with power supply units that just cannot power all of the devices installed on them.

Thanks to the over bus connection featured on the power supply units, the control unit controls their relative operation, analyzing the following

conditions:

230VCA network presence

Status tamper container

Status of the internally lodged buffer battery

Status of fuses

Any anomalies deriving from the described checks, besides being stored in the events memory, also generate corresponding telephone warnings.

Using the issued probe, the power supply units control the buffer battery charge depending on the temperature of the battery itself.

The 001SALS15 power supply unit's container can lodge a 7Ah (001SBAT7) battery and among two of the following types of modules:

001SMR8ICI remote expansion module 8 inputs

001SMR8O4R remote expansion module 8 outputs

001SRS485 signal amplifier for RS485 bus

In the same way, the 001SALS30 power supply unit's container can house a 15Ah (001SBAT15) battery and five modules among the ones listed above.

The detectors work also without being connected over bus to the system so as to ensure use even as standard-type auxiliary power supply stations with

any kind of burglar proof system. Here again, the functioning complies with the EN 50131-6.


85

ACCESSORIES

001SR2

2-relay card.

Connectable to the open collector outputs

of the CP series control units and of the

001SMR8O4R remote modules.

1 selectable NO - NC contact per relay.

001SPROBAT

Protection board against total discharge

of lead-acid batteries.

Mandatory for batteries with capacity higher

than 7.5 Ah.

001SNTC47

NTC temperature probe.

For the active monitoring of control unit

battery temperature.

001S24TW50

Bus cable for alarm systems.

Shielded and twisted grade 4.

2 x 0.5 mm² + 2 x 2 x 0.22 mm².

Complies with CEI 20-22 II.

Operating temperature 450 V / 750 V.

200 m coil.

001S24TW75

Bus cable for alarm systems.

Shielded and twisted grade 4.

2 x 0.75 mm² + 2 x 2 x 0.22 mm².

Operating temperature 450 V / 750 V.

Complies with CEI 20-22 II.

200 m coil.

001SIFTS01

Touch screen connection interface card.

Allows monochrome and colour touch

screen connection (see home automation

catalogue) to 002SSCP8048, 002SSCP8096,

002SSCP8200 and 002SCP6099WL control units.

001SDOMO2

Software license.

Allows use of the 002STS550M terminal

in home automation applications with

the he¡Bus home automation bus. One

proprietary license per terminal.

001SIRUSB8

Programming cable kit.

The package contains a USB A-B cable and

a CD with SWLINK software for programming

the 002SSCP8048, 002SSCP8096, 002SSCP8200

and 002SSCP6099WL control units, a

connector for PC connection to the

002STS550M touch screen, a RS232-USB

converter complete with CD with relative

driver.


86

NOTES


87

NOTES


88

© Came Cancelli Automatici S.p.A.

All of the content data is thoroughly checked. All of the content data is thoroughly checked. In any event we are not liable for any errors and/or omissions.

The content of this catalogue is subject to change at any time without prior notice from Came Cancelli Automatici S.p.A.


KS

UP

#CE

N26

2011

4 -

GIU

_201

4 -

EN

_EX

PO

RTCame Nord Est

Udine – Italy Came SudNaples – Italy Came United KingdomNottingham - UK Came FranceParis - France Came SpainMadrid - Spain Came PortugalLisbon - Portugal Came SeefeldBerlin - Germany Came KorntalStuttgart - Germany Came Group BeneluxLessines - Belgium Came NederlandBreda - Netherlands

Came Poland Sp. z o.o.Warszawa - Polska

Came Americas AutomationMiami - USA Came AdriaticKastav – Croatia Came do Brasil Serviços de Automaçao São Paulo – Brazil Came Automatismos de MexicoMexico City – Mexico Came RusMoscow - Russia Came GulfDubai – U.A.E. Came India Automation SolutionsNew Delhi - India TRI-Bpt AutomationGermiston - South Africa

Came Cancelli Automatici S.p.A.

via Martiri della Libertà, 15Dosson di Casier - Treviso - Italytel. (+39) 0422 4940fax (+39) 0422 4941www.came.com - [email protected]

Came cancelli automatici S.p.A.

is certified

Quality and Environment

UNI EN ISO 9001

UNI EN ISO 14001

100%

MA

DE IN ITALY CERTIFIC

AT

E

ITP I . 3 86

GARANZIA QUALITÀ ORIGINALE

Engineered and made

in ITALY

Came is a company of


security catalogue

Devices & Hardware