secure infrastructure solutions for wireless networks · secure infrastructure solutions for...

Oberon, Inc. ● 1315 S. Allen Street ● State College, PA 16801 ● Phone (814) 867-2312 ● Fax (814) 867-2314 ● www.oberonwireless.com

Oberon products are updated periodically. Please contact your Oberon representative for the most up-to-date specifications. 1

Secure Infrastructure Solutions For

Wireless Networks

Product Catalog 2015 oberonwireless.com

Oberon, Inc. | 1315 S. Allen Street | State College, PA 16801 | Phone (877) 867-2312 www.oberonwireless.com

Table of Contents

1 Welcome to Oberon

2 Access Point Compatibility

3 Selecting the Best Enclosure or Mounting Solution

4 IC Sentinel® Indoor Air Quality Monitoring System

Suspended Ceiling

6 1052-00 Ceiling Tile Enclosure – Multivendor WAP & External Antennas9 1052-AN-ANT16 Suspended Ceiling Enclosure - Aruba Networks AP & Antennas

12 1052-AP105 Suspended Ceiling Enclosure - Aruba Networks AP15 1052-AP135 Suspended Ceiling Enclosure - Aruba Networks AP18 1052-AP215 Suspended Ceiling Enclosure for WA Ps with Detachable Antennas21 1052-AP225 Suspended Ceiling Mount - Aruba Networks AP24 1052-CCOANT Suspended Ceiling Enclosure - Cisco AP & Antennas27 1052-CCOAP Ceiling Mount - Cisco AP30 1052-DOME Suspended Ceiling Enclosure - Aruba Networks AP33 1052-ENT3610 Suspended Ceiling Enclosure - Enterasys AP36 1053-01 Suspended Ceiling Enclosure - Cisco AP & Antennas38 1057-00 Suspended Ceiling Enclosure with ABS Dome - Multivendor AP40 1059-00 Suspended Ceiling Enclosure with ABS Dome - Multivendor AP

Suspended Ceiling - Shallow Backbox

42 1041-00 Concealed Spline Ceiling Mount44 1044-00 Concealed Spline Ceiling Mount46 1064-00 Suspended Ceiling Mount - Cisco AP48 1064-T Suspended Ceiling Mount - Cisco AP50 1066-AP135 Suspended Ceiling Mount - Aruba Networks AP52 1066-AP225 Suspended Ceiling Mount - Aruba Networks AP54 1068-00 Suspended Ceiling Mount - Multivendor AP & DAS Remote56 1075-AP135 Suspended Ceiling Mount - Aruba Networks AP58 1075-AP225 Suspended Ceiling Mount - Aruba Networks AP60 1075-CCOAP Suspended Ceiling Mount - Cisco AP62 1075-CP Suspended Ceiling Enclosure - Clear PC Dome for Multimedia Gateway64 1075-WA Suspended Ceiling Enclosure - White ABS Dome for Multi-vendor WAP66 1077-AP135 Suspended Ceiling Mount - Aruba Networks AP68 1077-AP225 Suspended Ceiling Mount - Aruba Networks AP70 1077-CCOAP Suspended Ceiling Mount - Cisco AP72 1077-CP Ceiling Enclosure - Clear PC Dome for Multimedia Gateway74 1077-WA Ceiling Enclosure - White ABS Dome for Multi-vendor WAP

Wall and Hard Ceiling - Surface Mount

76 1008-00 Open Ceiling Beam/Truss Mount for WAPs77 1009-00 Right Angle Bracket for WAPs - White78 1010-00 Right Angle Bracket for WAPs - Open Back with Sidewalls80 1011-00 Right-Angle Bracket - with Cover and Sidewalls82 1012-00 Right Angle Bracket - with WAP Lock, Cover, and Sidewalls83 1013-00 Articulating WAP and Antenna Wall Mount85 1013-COVER Articulating Right Angle Wall Bracket for WiFi Access Points and Antennas87 1015-00 Surface Mount Non-Metallic Lock Box for WAPS – White Cover89 1015-C Surface Mount Non-Metallic Lock Box for WAPS - Translucent Cover91 1016-00 Large Surface Mount Non-Metallic Lock Box for WAPS - White93 1016-C Large Surface Mount Non-Metallic Lock Box for WAPS - Translucent Cover95 1030-00 Indoor Wall Enclosure - Steel & White ABS plastic - Multi-Vendor AP97 1031-00 Indoor Wall Enclosure - Steel Multi-Vendor AP

Wall and Hard Ceiling - Recess

99 1042 Recessed Hard Ceiling Wireless AP Installation Kit - New Construction

101 1043 Recessed Hard Ceiling Wireless AP Installation Kit - Old Construction/Remodel

103 1051-00 Recessed Hard-Lid Ceiling Enclosure - Multi-Vendor AP105 1065-CCOAP Recess Hard-Lid Wall/Ceiling Mount - Cisco AP107 1076-AP135 Locking Recess Wall/Ceiling Mount - Aruba Networks AP108 1076-AP225 Recess Wall/Ceiling Mount - Aruba Networks AP110 1076-CCOAP Recess Wall/Ceiling Mount - Cisco AP112 1076-CP Recess Wall/Ceiling Mount - Multi-Vendor AP114 1076-WA Recess Wall/Ceiling Mount - Multi-vendor AP116 1078-AP135 Recess Wall/Ceiling Mount - Aruba Networks AP117 1078-AP225 Recess Wall/Ceiling Mount - Aruba Networks AP119 1078-CCOAP Recess Wall/Ceiling Mount - Cisco AP121 1078-CP Recess Wall/Ceiling Mount - Multi-vendor AP

123 1078-WA Recess Wall/Ceiling Mount - Multi-vendor AP

Indoor/Outdoor NEMA

125 1020-00 NEMA 4 WAP Enclosure, Gray PC Plastic, Screw-on Cover127 1020-RAB NEMA 4 WAP Enclosure, Gray PC Plastic, Screw-on Cover, Wall Mount129 1024-00 NEMA 4 WAP Enclosure - Gray PC Plastic, Hinged, Lockable Door131 1026-00 NEMA 4 WAP Enclosure - Gray PC Plastic, Hinged, Lockable Door134 1028-04-ANT5-B Hard Lid Ceiling-Mounted NEMA 4 Enclosure137 1028-04-ANT5-F Suspended Ceiling-Mounted NEMA 4 Enclosure140 1028-08-ANT5-B Hard Lid Ceiling-Mounted NEMA 4 Enclosure143 1028-08-ANT5-F Suspended Ceiling-Mounted NEMA 4 Enclosure for Wireless Equipment

Suspended Ceiling Zone and A/V Equipment

146 1074-04-ANT7 Suspended Ceiling Zone Enclosure for Pre-terminated Cabling Systems149 1074-06-ANT7 Suspended Ceiling Zone Enclosure for Pre-terminated Cabling Systems152 1074-04-PROJ Suspended Ceiling Mount for Projector and Multimedia155 1074-06-PROJ Suspended Ceiling Mount for Projector and Multimedia158 1074-04-VENT Suspended Ceiling Zone Enclosure for Pre-Terminated Cabling Systems161 1074-06-VENT Suspended Ceiling Zone Enclosure for Pre-Terminated Cabling Systems

164 Retrofit/Adapter Doors

WiFi and DAS Antennas

172 34-BMANT5 Indoor/Outdoor Wi-Fi Antenna173 34-BMANT24 Indoor/Outdoor Wi-Fi Antenna174 34-DMDUAL Dual Band Wi-Fi Antenna175 34-PLANAR Dual Band Wi-Fi Antenna176 34-ZDUAL Dual Band Wi-Fi Antenna177 39-BULKHD-KIT-RPSMA Snap-in Bulkhead Connector178 39-BULKHD-KIT-RPTNC(F) Snap-in Bulkhead Connector

WAP Vanity Covers

179 33-AHAP330-SKIN Vanity Skin - Aerohive Networks AP330 AP180 33-ANT-COVER Indoor WiFi Antenna and WAP Cover181 33-WAP-SKIN Vanity Skin - Cisco AP

Cabling Accessories

182 39-CORD-GRIP Cord Grip183 39-RJ45-BULKHEAD Bulkhead Modular Pass-Through

Enclosure Accessories

184 39-52-MNT-KIT Universal AP Mounting Plate185 39-1790-INTERLOCK PoE Interlock Switch

Ceiling Mounting Accessories

186 39-POLE-MOUNT-BRACKET Outdoor Pole Mounting Bracket187 39-CEILING-TBAR Ceiling Grid T-bar188 1045-00 Above Ceiling Hanger

189 Custom Enclosures Installation-Specific Designs

Warranty

190 Appendix A – Industry Compliance Assurance191 Appendix B – Oberon’s National Electric Code Paragraphs Compliance Statement192 Appendix C – Warranty

Welcome to Oberon

Mounting Solutions and Enclosures for Securing Wireless, Networking and A/V equipment Secure - Aesthetic - Convenient

Oberon’s product line includes locking Wi-Fi access point, DAS Remote, networking and A/V equipment enclosures for virtually every workspace. No other manufacturer provides such a complete line of products to secure your in-building wireless and networking equipment. Oberon has a solution for suspended ceiling, hard-lid ceiling, and wall-mounted equipment, indoors and outdoors, for classrooms, public spaces, hospitals, commercial offices, warehouses, and just about any other environment. Oberon’s products are designed to protect most manufacturers’ datacom/telecom equipment.

UL Listed and designed to satisfy national electric code for installation in the above-ceiling space: this includes wall�mounted locking enclosures, cut�away ceiling enclosures for hard-lid areas, and NEMA enclosures for outdoor environments. The products are constructed of steel and aluminum and are electro-statically powder-coated for an attractive, extremely durable finish.

Oberon’s products improve wireless infrastructure physical security by allowing the wireless equipment to be “locked down” in otherwise open office spaces. Wireless coverage is improved using the ceiling�mounted enclosures as the

enclosure door provides an effective back�plane for the antenna, thereby optimizing the antenna pattern for in�room coverage. Moves, adds, and changes are facilitated by permitting easy access by authorized personnel. In healthcare environments, equipment is serviced with the turn of a key, rather than lifting ceiling tiles. Oberon’s ceiling enclosures and antenna products are UL listed and preserve the integrity and safety of the ceiling system and air-handling space.

Zone Enclosures and Cabinets Bringing Bandwidth Closer to the UserTM

Oberon’s zone enclosures offer flexibility by securing networking and A/V components in the workspace where they are needed. Mounting access switches in the workspace brings bandwidth closer to the user, reduces horizontal cabling volume, and reduces congestion in the telecom room.

Manufacturing and Support

Oberon’s specialty is wireless and zone enclosure and mounting solutions, and the products are designed and tested by an experienced technical staff with extensive wireless networking survey, design, and installation experience. Oberon’s products have been tested with most of the industry�leading wireless networking vendor products.

As a product and custom design service vendor, we provide outstanding support to our market channel partners: the distributors, network designers, installers, and integrators responsible for enterprise wireless LAN installation. Our combination of patent�pending, innovative products and industry�experienced staff will provide the wireless infrastructure designer exceptional cost, performance, security, aesthetic, and installation value.

© 2013 Oberon, Inc. Copyright. All Rights Reserved. All text, images, graphics, and other materials contained in this catalog are subject to the copyright and other intellectual property rights of Oberon, Inc. These materials may not be reproduced, distributed, modified or reposted to other websites without the express written permission of Oberon, Inc.

��

� ��

1

Access Point Compatibility Oberon has developed strategic relationships with the following leading wireless access point vendors to ensure that Oberon’s products have been tested and verified for fit and functionality.

Oberon’s wireless LAN access point and Ethernet switch enclosures accommodate products from most leading vendors. Visit the online search feature on Oberon’s website (www.oberonwireless.com) to find enclosures and mounting solutions for the products you are using.

2

Selecting the Best Enclosure or Mounting Solution

Oberon has indoor, outdoor, wall, and ceiling enclosures and mounting solutions for all leading vendors of wireless access points and DAS remote units. The Enclosure Finder at www.oberonwireless.com will help you select the preferred mounting or enclosure solution in a few steps.

On the Oberonwireless.com homepage, simply select the product type, vendor, and model of the product used in your installation and select “Search.”

You will find a list of the most popular enclosures and mounts available for your product, making it quick and easy to select your solution.

3

Indoor Air Quality Monitoring System

IC Sentinel® is a real time environmental quality monitoring solution, comprised of facility wide, multi sensor

modules and cloud based data collection and reporting software. IC Sentinel® is designed to assist infection

control professionals and contractors in hospitals, and facilities and environmental managers in data centers,

monitor, collect, report, and address critical air quality and environmental factors such as particle count,

differential room pressure, air quality, humidity, sound, and light levels.

IC Sentinel® Sensor IC Sentinel® system graphing capability

Features

Distributed, networked, multi sensor modules, powered by PoE. Cloud based data collection and

reporting software

Monitor and set alerts for undesirable environmental conditions in hospitals, operating rooms,

protective environments, airborne isolation rooms, pharmacies, data centers, and construction areas

Collect long term metrics to detect changes in environmental quality over time

Remotely monitor sites any where in the world, from anywhere in the world

Specifications

Airborne Particulates: 4 Channel Particle Counter (0.5um, 1 um, 5um, 10um)

Differential Air Pressure: Bi directional, positive, and negative differential room pressure

Humidity : % Relative Humidity +/ 10%

Air Quality: CO2 Gas Detection in ppm

Light level: Human eye response to visible light in Lux

Sound level: measure sound level 30 100 dB SPL

4

Size: 7.0” X 6.85” x 4 .125”

Weight : 3.25 lbs

Power: IEEE802.3af PoE

Interface: RJ 45 Connector IEEE 802.3

Security: AES Network security

Operating temp: 0 to +50 C

Storage Temp: 20 to +80 C

Includes

(1) Sensor per carton

(1) Wall mounting bracket

Users Manual

Ordering Information and Accessories

P/N 1984 IC Sentinel Sensor (hardware)

P/N 2377 IC Sentinel Annual Service Contract w/ Cloud Software subscription (Required)

Accessories

P/N 2378 Cellular Data Modem hardware and activation

P/N 80846 Zero Count Filter w/inlet adaptor

P/N MC2203 Quick Disconnect Fitting, 3/16" tubing

P/N 242901 04 Static Pressure Sensor, 4"



P/N SRPS Static Pressure Wall Plate

P/N PSW4824 POE PoE Midspan Injector

P/N 1991 IC Sentinel Sensor Wall Bracket, Spare

P/N 81119 External Sampling Adapter

P/N 2331 Static Pressure through Wall Kit

P/N PS4820 POE 1 PoE Injector with AC Cable

Customer Print, Detailed Specifications, and Installation Instructions

Visit www.icsentinel.com

Software

Contact your IC Sentinel representative or reseller

5

BIM, CAD, and CSI Specifications

Custom Access Point, DAS Remote, and Networking Equipment Enclosures and Mounting Solutions

Custom Access Point Enclosures

Oberon offers one of the industries broadest ranges of wireless access point enclosures to meet your wireless deployment needs. This means that you will probably find what you need in this catalog; however, if you find an application where you need a customized solution, Oberon can design enclosures and system components for practically any network connection requirement. Using our existing design database, Oberon can quickly and economically design electronic equipment enclosures which accommodate most manufacturers’ products. Contact your Oberon representative for details.

Aesthetically pleasing, locking, plenum rated ceiling enclosuresVandal, tamper, and theft-resistant indoor enclosuresArchitecturally benign or discrete electronics enclosuresIndoor/outdoor NEMA 4/ 3R enclosures

Applications:

Wireless LAN access points and radio bridgesNetwork CamerasIndoor and outdoor cellular repeaters and convertersWireless asset tracking and RFIDSecurity sensorsPICs and PLCsEmbedded processorsOther sensors

These additional features add value to, and simplify, your installation:

Integrated single, diversity, directional, or omni-directional antennasAntenna swivel mountsIntegrated RF connectors and RF jumper cablesWeather proof and tamper resistant locksHeaters and blowers for outdoor installationsCord grips for field termination of data cablesWeather proof Ethernet connectorsClear acrylic domes and doorsIntegrated AC power receptacles, conduit clamps, and grounding featuresLightning arrestors and surge suppressorsPOE splittersSerial to Ethernet adaptorsPICsEmbedded controllersCellular ModemsUL ListingOSHPD Compliant

189

Appendix A – Industry Compliance Assurance

A well-designed network addresses the physical security of all components. In many industries, the need to ensure continual and secure operation of wireless networks has led to the development of guidelines and regulations regarding the proper placement of networking equipment in a variety of physical environments.

Government, Retail, and Healthcare are three such industries. All deal with sensitive, mission-critical information that must be secured from tampering and theft. Additionally, Healthcare environments must take infection control into account, complicating networks where reaching physical components can mean intrusion into air-handling spaces.

Enclosures for wireless equipment address these needs in a variety of ways:

Secure networking components behind locking doors, away from tampering and theft attempts

Attach securely to building structures for greater security and physical protection

Accomplish moves, adds, and changes quickly, allowing authorized personnel to work below the back-

box with no need to intrude on the air-handling space

Lock access points into their best placement for ideal radiation patterns, ensuring that you retain full

control over placement

For Oberon enclosures, security and convenience go hand-in-hand. Imagine making moves, adds, and changes in minutes simply by unlocking the enclosure door for easy access. Place your network equipment where you want it, and rest assured that it won't move or be removed.

SIMPLIFY PCI-DSS COMPLIANCE Payment Card Industry Data Security Standard (PCI-DSS) requirement 9.1.3 states that the operator must "restrict physical access to wireless access points, gateways, and handheld devices” and “verify that physical access to wireless access points, gateways, handheld devices, networking/communications hardware, and telecommunication lines is appropriately restricted."

SAVE TIME & MONEY: SIMPLIFY ICRA PROCEDURES In Healthcare, The Joint Commission on Hospital Accreditation has established procedures for mitigating the spread of infectious disease and contamination. Infection control risk assessment (ICRA) will have a serious impact on cabling installation, moves, adds, and changes.

Oberon enclosures provide access to wireless LAN access points and telecom equipment without entering the air-handling “plenum” space, simplifying compliance with ICRA guidelines. In addition to providing added safety, convenience, and the security of a locked door, Oberon enclosures also help installations meet the National Electric Code (N.E.C.) article 300.22 requirements for installing unlisted equipment above a suspended ceiling.

Telecom enclosures enhance long-term growth options with flexible cabling, allowing easy future changes and Bringing Bandwidth Closer to the User™.

GOVERNMENT NETWORK DEPLOYMENTS: SECURITY FIRST Government / DoD– Directive 8100.2 mandates FIPS 140-2 compliance wherein FIPS 140-2 paragraph 4.5 requires "physical security mechanisms" to be applied.

Oberon enclosures feature locking doors and are secured to building structure, providing the physical security you need while remaining virtually transparent to wireless signals for optimum performance.

190

Appendix B –

Oberon’s National Electric Code paragraphs Compliance Statement

and

Underwriters Laboratories (UL™) Considerations when using Oberon’s Wireless LAN Access Point Mounting Solutions

Manufacturers’ Statement of Compliance with NFPA 70, National Electric Code

Oberon’s wireless access point enclosures are constructed entirely of non-flammable steel and aluminum in the plenum space. Therefore, they are compliant with the following NFPA 70 National Electric Code paragraphs, for wiring and equipment in Plenum Space:

300-21 Spread of Fire or Products of Combustion

300-22 Wiring in Ducts, Plenums and Other Air Handling Spaces, paragraphs (a), (b), (c), and (d)

For Compliance with National Electric Code paragraphs, Wireless access point enclosures should be supported according to the following paragraph:

300.11 Securing and Supporting

(A) Secured in Place. Raceways, cable assemblies, boxes, cabinets, and fittings shall be securely fastened in place. Support wires that do not provide secure support shall not be permitted as the sole support. Support wires and associated fittings that provide secure support and that are installed in addition to the ceiling grid support wires shall be permitted as the sole support. Where independent support wires are used, they shall be secured at both ends. Cables and raceways shall not be supported by ceiling grids.

191

Appendix C – Warranty

Terms and Conditions

Sale of Equipment – Seller agrees to sell the equipment specified on any quotation, sales order, invoice, or

packing slip to Buyer upon the terms and conditions stated below.

Shipment – Unless special arrangements are made, ownership of the goods and risk of damage/loss passes

to Buyer when the freight carrier picks them up from Seller, and Buyer is responsible for filing any freight claims for damage or loss. If an item is received with freight damage, it is very important for the Buyer to note "Damaged Freight” on the carrier's bill before signing it.

Freight and Other Charges – Freight charges are prepaid by Seller and added to Buyer's invoice plus a

service/handling charge. Sales tax will be charged as required by law.

Credit and Payment Terms – Standard credit terms are Net 30. Oberon accepts company checks, certified

checks, Visa or MasterCard. Payments on past due invoices will be subject to a "Late Charge" in the amount of 1½% per month.

Returns and Exchanges – Returned hardware may be subject to a restocking fee of 20% for enclosure

products and 10% for all other products. No returns will be accepted for customized orders, special cable order, etc. Returned units must be in original package, undamaged. No returns after 90 days. Customer shall insure return shipment for value of the product. Customer shall be responsible for legal and other fees associated with collection of payments for past due amounts.

Limited Warranty

Limited Warranty – Equipment manufactured by Seller -Seller warrants to Buyer that the equipment will be free of defects in materials and workmanship for a period of one (1) year from the date of shipment. This warranty shall not apply to any equipment, which is misused, or for any damage to the equipment resulting from improper installation or operation, vandalism, acts of God, or any other cause beyond reasonable control of the seller. This warranty shall be void if the equipment has been altered, tampered with, or repaired by a party other than the Seller or its authorized representative. In the event of equipment failure within the warranty period, Seller will repair or replace the defective equipment, at its option, provided that Buyer notifies Seller and obtains a RMA number prior to returning the equipment to Seller. Defective equipment must be returned, shipping prepaid, to the Seller's specified address. The warranty on repaired or replaced equipment will be the balance of the original Equipment Warranty. This Warranty Is In Lieu Of All Other Warranties, Express or Implied, Including, Without Limitation, Statutory Warranties or Warranty of Merchantability or Fitness for a Particular Purpose. Seller's sole liability and Buyer's sole remedy hereunder will be repair of replacement of the Equipment as provided in this agreement. Other Equipment -Seller will pass through to Buyer all original Manufacturers' Warranties that may apply to the equipment. Seller may, at its option, process warranty requests by the Buyer to the Original Manufacturer, or refer the Buyer to the Original Manufacturer. Seller is not responsible for any warranty-related issues. OBERON HEREBY EXPRESSELY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE AND ALSO DISCLAIMS AND EXCLUDES ALL CONSEQUENTIAL AND INCIDENTAL DAMAGES FOR BREACH OF CONTRACT OR OTHERWISE.

192

secure infrastructure solutions for wireless networks · secure infrastructure solutions for...

Documents