sectional panel tank

8/16/2019 sectional panel tank

1/4

GRP (FRP) SECTIONAL WATER TANKSMC HOT PRESSED MOLDING

SGT ANK PRIVATE LIMITEDCRN: 201021108W


2/4

EXTERNAL REINFORCEMENT

SYSTEM

SgTank reserves the right to amend the above proposal, depending on the

site condition and material availability

Material B Fast steel foundatin

Concrete foundation Material A

COMPONENTS MATERIAL

External Reinforcement GI

Internal Reinforcement SS 304

Internal Ladder SS 304

External Ladder GI

Air-Ventilation ABS Material

Sealant PVC Foam

Fasterners (External) GI

Fasterners (Internal) SS 304

Steel Skid Base Painted

Water Level Indicator GI

Man Hole Cover FRP

* SS 245:1995 specification

* Customize specification is possible

UNIFORM INTERNAL / EXTERNAL REINFORCEMENT SYSTEM

STEEL SKID BASE


3/4

QUALITIES & SPECIFICATIONS OF PANELS

DESIGN TO PRE VENT ALGAE GR OWTH

Insulated GRP panels protect water condensation in the tank and

minimizes temperature variation of the stored water to prevent

dewdrops phenomenon.

The 3 layer heat insulation panel minimize the heat losses and

maintain its contents in its original form.

GRP Sectional Panel Tanks are constructed of panels made from SMC

(Sheet Molding Compound) by hydraulic hot press under high temperature

(150oC) and pressure conditions to maintain the best endurance.

Using stainless steel for the interior structure and plated steel for the exterior,

the panel exhibits excellent resistance to erosion.

Easy installation with on-site bolt assembly and Tank shape and volume can be freely

designed with no restrctions based on site location, weather or climate.

A. MATERIAL : HOT PRESSED SHEET MOLDING COMPOUND (SMC) REINFORCED PLASTICS

• Unsaturated Polyester Resin ➠ Used for the panel is superi or or equal quality wi th “Class UP-G”, which are determined by JIS R 6919 and g ood

quality in weatherability and water resistance.

• Glass Fiber ➠ Used for the panel is non-alkaline quality which are determined by JIS R 3411, JIS R 3412 and JIS R 3413.

• Filler, Pigment ➠ Used for the panel does not affect to the quality of water and to the quality

of the components of the panel.

B. GENERAL PHYSICAL PROPERTIES OF GRP

DESCRIPTION GRP DESCRIPTION GRP

Tensile strength 100MPa Shearing strength 100MPa Bending strength 160MPa Specific gravity 1.8

Elastic modulus in bend 13,000MPa Coef.of thermal expansion 2.16 x 10–5 / oC Glass cantent More than 30% Thermal conductivity 0.17W / (m • K)

Barcol hardness 50 Coef.of water absorpti on Less than 0.1% Compression strength 295MPa

The panels are made by Sheet Mould Compound (SMC)

method to give low light transmittance. Thus low luminous

intensity on the inner surface of the tank penels prevent the

growth of algae.

Sg Tank panel

High light transmittable panel

HEAT INSULATION PANEL OPTIONAL

WHAT IS GRP WATER TANK ?

Standard

Non Leakage

Easy Assembly

Long Life

Clean

Stable Construction


4/4

SGT ANK PRIVATE LIMITED CRN: 201021108W

The information contained herein is, to the best of our knowledge, accurate but it is offered for consideration and guidance only. Allrecommendations or suggestions are made without gurantee. SGTANK PRIVATE LIMITED disclaims any liability for loss or damage incurred in

connection with the use of materials described in this brochure. By the policy of constant improvement of design and performance,

SGTANK PRIVATE LIMITED reserves the right to make amendments to the specifications stated without notice.

www.sgtank.com

sectional panel tank

Documents