section 703 apparatus inspection. procedures the driver/operator should follow a systematic...
TRANSCRIPT
Section 703
Apparatus Inspection
ProceduresThe driver/operator should follow a
systematic procedure for inspecting apparatus
This ensures that all important items are checked every time the inspection is made.
Items to CheckBatteries Oil Tires
Proper Inflation
Braking System
Coolant System
Electrical System
Fuel Steering System
Hydraulic Fluids
Appliances Tools Lubrication
Equipment Foam Systems
Belts Hoses
ChecklistYou will be required to perform an
apparatus readiness check on a fire apparatus.
Apparatus MaintenanceMaintenance – keeping something in a
state of usefulness or readiness.
Repair – to restore or replace that which has become inoperable.
Apparatus MaintenanceEngine The most important phases of engine
maintenance are regular service inspections.
Apparatus MaintenanceDaily Maintenance: Includes checking oil level, radiator coolant
level, fuel levels, tires (proper inflation, wear, cuts), equipment inventory, checking visible and audible warning signals.
Apparatus MaintenanceWeekly Maintenance: Bleeding moisture from air brake tanks,
removing equipment from apparatus and cleaning, and the starting of all portable engines.
Apparatus MaintenancePeriodic Maintenance: Includes lubricating all motor, gear, or
hand operated appliances according to manufacturer’s specification
Apparatus MaintenanceBatteries Check voltage, specific gravity & corrosion
Check terminals & cablesAir Filter Should be serviced by qualified personnel
as required.
In Cab InspectionMirrors & seat are properly adjustedAll electrical switches are in the off position
prior to starting the apparatusLet engine warm up before putting under
full load (non emergency responses)Inspect seat belts, cuts & fraying
In Cab InspectionGauges are properly working:Speedometer, RPM gaugeOil Pressure, FuelAmmeter/VoltmeterAir pressure gauges,Temperature gaugesVacuum & Hydraulic Pressure gauges
In Cab InspectionControls are properly workingElectrical Equipment switchesTurn signal switchesHigh bean headlight switchesHeating & AC switchesRadio ControlsAudible warning devicesWindshield wiperDefroster controls
In Cab InspectionGauges
In Cab InspectionsElectronics & Controls
In Cab InspectionsElectronics & Controls
Pump Inspections Daily
Operate the pump drive control & pump engages
All pump panel gages are functioningDrain pump and hose lines completelyOperate pump controlsInspect water & foam tanksCheck the underside for leaksCheck Deck guns or turrets for range of motionOperate valves
Pump Inspections WeeklyFlush the pump with clear waterCheck & clean intake strainersCheck the pump gear box for proper oil
level and traces of waterOperate the pump primer with all pump
valves closed
Pump Inspections WeeklyOperate the changeover valveCheck packing glands for leaksOperate the pump pressure control devicesOperate the foam proportioning system
Pump Panel Gauges
Pump PanelMaster Intake Gauge
Pump PanelMaster Discharge Gauge
Compound Gauge