section 11 - electrical
DESCRIPTION
BLA Catalogue 2011TRANSCRIPT
www.bla.com.au
ELE
CT
RIC
IAL
section
11
BEP CZone System 48-57BEP Switch Panels 58-70BEP AC & DC Meters 71-73BEP Tank Monitors 74BEP Gas Detectors 75BEP Battery Distribution Systems 76-90Circuit Breakers 91-93Switch Panels 94Veethree Instrumentation 95-101Battery & Bilge Pump Monitors 102Switches & Power Plugs 103-108Battery Switches 109-110Battery Chargers 111-113Shore Power Systems 114-115Voltage Reducers, Galvanic & Battery Isolators 116 Electrical Cable Ties & Sleeving 117Battery Boxes, Trays & Tie Downs 118Wiring Harnesses 119Electrical Connectors, Fuses & Wire 120-126Horns & Wipers 127-130VHF Radio, Speakers & Accessories 131-132Pacific Aerials 133-138
ELECTRICAL
47
Designed for manufacturers and installers of Marine, RV and Specialty Vehicles. It simplifies installation of electrical systems through the replacement of complicated, cumbersome wiring to switch and fuse panels, with state of the art, robust interfaces and light NMEA 2000 network cable. It also provides the end user a sophisticated solution through the automation of complicated control and monitoring issues associated with today’s on board systems.
InstallationBuilders recognize an immediate benefit with reductions in cable usage, harness weights and installation times. CZone™ also integrates many stand alone components into one intuitive system. Wiring is dramatically simplified, CZone™ is designed to remove complex switching clusters and wiring runs. Integrated diagnostics ensures fault finding is simple. CZone™ is the digital networking system that is both cost-effective and scalable. Modules can easily be added into the system to best suit the OEM and end-users’ needs.
Traditional Electrical DC WiringWiring DC systems can be complex and installation time can be extensive. The larger the system, the more wire is required, which creates weight and space concerns, not to mention increased cost and complexity of design and manufacturing. Basic maintenance and trouble shooting of traditional wiring systems can be difficult to manage.
• Switch panel wiring is complicated and extremely labor intensive to install• Cable runs are long and have multiple conductors. Switching of common circuits is complex• Long wire runs require larger cable, adding weight, increasing cost and reducing space
Digital Control & Monitoring SystemTM
Quality marine equipment
section
11
48
ELE
CT
RIC
AL
www.bla.com.au
section
11
49
ELE
CT
RIC
AL
ConfigurationWe provide the tools to help you determine the modules needed based on your specific requirements. Then, simply program with the CZone™ intuitive configuration tool.
IntegrationCZone™ is NMEA 2000 compliant and uses the standard micro cables and connectors. Being NMEA 2000 compliant you can have trust in the network. This also allows a single network backbone to be installed for multiple systems (CZone™ and other NMEA 2000 devices). Additionally, CZone™ can share certain monitoring functions with other NMEA 2000 compliant screens.
Versatility & SecurityCZone™, designed for 9-32V systems, features built-in timers, dimmers (including support for halogen lighting), alarms, voltage reducers and load shedding. With safety in mind, CZone™ features a manual bypass. Our No-Single-Failure-Point technology ensures a plug-n-play system that is designed to handle mishaps. If a module is damaged, the system will automatically program the replacement module when it is plugged in. This means any module can be replaced without using high tech service people. Our security features allow custom configurations that can be locked.
DC Wiring CZone™ decentralizes the DC power distribution system, locates circuit control and protection modules closer to loads to shorten cable runs and reduce the size of conductors, significantly decreasing the cost and weight of the electrical wiring harness. The system replaces complex wiring with a single data wire.
• Complex switch panel wiring removed, replaced with single data cable connection• The grouping of multiple loads into common areas (Zones) with Output Interfaces is the key to the system• Heavy duty battery mains cable, replaced by multiple smaller conductors
Digital Control & Monitoring SystemTM
CZone™ LCD Displays The CZone™ displays are the interface between the CZone™ network and the user. They offer full control of circuits as well as the ability to view important on board systems information such as tank levels and power levels (for both AC and DC supplies). They also provide audible and visual alarms with systems diagnostics. The displays are extremely intuitive to use with simple controls and a menu structure that is easy to follow. The “modes of operation” feature allows the control of multiple circuits with a single push of a button. For instance, “night running” mode turns pre-selected lights on to dim levels. These modes are all user configurable. They can be used to set CZone™ parameters for initial installation and future system maintenance (display interface only).
• 3.5" Transflective QVGA LCD• IPX7 water ingress protection• Rotary knob for easy menu navigation• Simple user interface• 165(w) x 105(h) x 62(d) mm• Power consumption @12V
180mA (standby 130mA)
• Screen size 8.4" (SVGA)• IP64 water ingress protection• Touch screen operation• Brightness (cd/m2) 450• Input voltage 12VDC• 234(w) x 184(h) x 42(d) mm• Power consumption 20W
• Screen size 10.4" (SVGA)• IP64 water ingress protection• Brightness (cd/m2) 400• Input voltage 12VDC• 276(w) x 227(h) x 50.7(d) mm• Power consumption 25W
Digital Control & Monitoring SystemTM
3.5" Display InterfaceTM
8" Touch ScreenTM
10" Touch ScreenTM
Quality marine equipment
section
11
50
ELE
CT
RIC
AL
BLA Code
112802
BLA Code
112794
BLACode
112798
www.bla.com.au
section
11
51
ELE
CT
RIC
AL
CZone™ LCD Displays The CZone™ Displays are designed with both the manufacturer and end-user in mind. The easy to use display screens put the control of all components directly at your fingertips. Multiple Display Interfaces can be used in the same system. The scroll and click interface is simple to use in the roughest of seas.
Settings: Allows OEM or technician access to the configuration of a system (via password). Display Interface only. No need for computer to set or change configuration settings such as circuit labels, circuit breaker sizes, etc.
Modes: Key to the ease of operation. With one key press, user can turn on a group of circuits, without having to scroll, search for, and turn on the individual circuits that they need for operation of their vessel/vehicle. When leaving vessel or vehicle, simply press “systems off” to turn off all non-essential circuits. Entertainment mode allows preset activation of salon lights, music etc... All functions can be controlled remotely with CZone™ remote.
Control: Breaks down the circuits into easy to identify groups for quick control, ie., to turn on fresh water pump open “pumps” group. User can open pumps group and select fresh water pump. This screen also allows the user to monitor the status of the circuit ie on, off, fault and current draw.
Monitoring: Allows user to easily monitor AC and DC power, tanks, data, alarms, temperature and pressure, and circuit status. Presents data in analogue and digital form.
Power Control• Turn circuits on and off including timer and light dimming control• Displays logging of circuit run time and ON cycles
DC Power Meter• Displays voltages of multiple battery banks, includes low and high voltage alarms• Displays charge and discharge (amps) of multiple battery banks• Displays battery capacity in ampere hours and % charge/discharge, includes low ampere hour alarm• Displays logging of min and max voltage, and minimum battery capacity
AC Power Meter• Displays multiple line voltages (230 and 110V), includes high and low voltage alarm• Displays AC line frequencies, includes high and low frequency alarm and AC power consumption in kW• Displays logging of min and max voltage, frequency, and max current
Tank Levels• View tank level information for multiple tanks and fluid types
Favourites• Displays standard NMEA 2000 information
Alarms/diagnostics• CZone™ network status reporting• Presents alarms for on board faults in audible and visual form (bilge pump running, smoke alarm)
Digital Control & Monitoring SystemTM
The Output Interface (OI) provides an intelligent replacement for traditional circuit breaker and fuse panels. It has six high power, robust output channels which provide the power supply, control and fusing for a circuit as well as integrating many other built in features such as timers and dimmers. The OI is behind the CZone™ concept of decentralising the power distribution, compared to traditional electrical layouts which are typically based around a large, centralised circuit breaker or fuse panel. The OI’s allow the installer to move the circuit control and protection closer to the loads which significantly shortens cable runs and reduces the size of the conductors. This equates to a reduction in the cost and weight of the electrical wiring harness, ie. less copper.Connection to the unit is simple: a large 6 way plug allows connections to cables of up to 16mm2 (6AWG) in size, or multiple smaller conductors. No need for specialised crimp terminals and expensive crimp tools to be carried for terminations to CZone™, just a blade screwdriver. A protective flexible boot offers protection to the connections from harsh environments.
Features:• 4 levels of backup fusing including manual override
(as required by ABYC)• 6 x 20 amp circuits• Programmable software “fuse” sizes• Multiple channels can be bridged together to offer higher
current switching• Small, non metallic, easy to install case• IPX5 water ingress protection• 200(w) x 128(h) x 45(d) mm• Power consumption @12V 85mA (standby 60mA)
The Motor Output Interface (MOI) has an output pair for controlling DC motors which require a reversal of polarity to change the direction of their mechanical operation. For example, a DC motor for an electric window mechanism will move the window up or down depending on the polarity of the feed to the motor. Historically the wiring and control circuitry for such installations is complicated and requires a number of individual components. Often controls for these devices are mounted remotely to the motor so wiring runs can be long. the MOI replaces all of these devices with one simple solution that can be mounted close to the motor further reducing cable runs.The MOI can be configured to deliver a “soft start” so that motor driven devices don’t start with a sudden and abrupt motion. The MOI also incorporates two standard output channels such as is found on the OI.
Features:
• Single motor control and two normal channels per unit, 20A per output
• Built In circuit protection • IPX5 water ingress protection• 200(w) x 128(h) x 45(d) mm
DC positive feed
Fuses for emergencycircuit bypass
Circuit status indicator
Connector & protective boot
Circuit ID label
NMEA 2000 connector
Reverse polarity indicator
Fuses for emergency circuit bypass
Output InterfaceTM
Motor Output InterfaceTM
BLACode
112820
BLACode
112816
Quality marine equipment
section
11
52
ELE
CT
RIC
AL
www.bla.com.au
section
11
53
ELE
CT
RIC
AL
The Meter Interface (MI) accepts inputs from external AC and DC power metering sensors. It then processes and converts the analog signals into digital strings that can then be presented, by the display, to the user, as one of several, easy-to-understand formats such as: AC and DC voltage and amps, AC Kilowatts, DC battery capacity in amp hours and % remaining and all with user definable high and low alarms. Intelligence is built into CZone™. The MI can calculate the battery capacity as ampere hours and/or percentage of charge remaining. Since CZone™ provides both monitoring and control for DC systems, it can be configured to turn off non-essential circuits in the event that the battery is discharged to a low level. This helps to ensure that there is enough charge left in the battery to power safety critical circuits.
Features:AC• 3 x AC voltage inputs (multi voltage)• 2 x AC current inputs• Calculates true RMS powerDC• 3 x DC voltage inputs (multi voltage)• 2 x DC current inputs• Calculates battery capacity as amp hours
and percentage charge remaining• Resolution for current metering down to 0.1AGeneral• Outputs standard NMEA 2000 sentences• 156(w) x 100(h) x 42(d) mm• IPX5 water ingress protection• High and low alarm levels can be set for all inputs
The Signal Interface (SI) connects CZone™ to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input. For example, the SI can be easily programmed to allow a fluid transfer pump and an alarm to turn on simultaneously when the SI detects that a low tank level has been reached. Connect standard switches to the SI to allow control of CZone™ outputs. The module provides LED status indications for each input. This allows fast diagnostics while providing information back to CZone’s™ display interface.
Features:
• Accepts inputs from traditional switch types being used to control outputs
• Accepts inputs from switches to trigger alarm i.e. high water float switch
• Accepts inputs from industry standard tank senders (0-5V, 10-180 Ohm, 240-33 Ohm)
• Accepts 0-1000 Ohm and 0-30V sensors• Outputs standard NMEA 2000 sentences• Accepts temperature and pressure inputs• Accepts inputs from general voltaic or resistive signals can be
used for controlling outputs or to display a physical position i.e. show a hatch is partially open
• LED status indicators for each input• 156(w) x 100(h) x 42(d) mm• IPX5 water ingress protection
NMEA 2000 connector
Network status indicator
DC voltage indicator
AC voltage indicator
Terminal block
Waterproof cable seal
CAN network status indicator
Signal status indicator
NMEA 2000 connector
Waterproof cable seal
Terminal block
Meter InterfaceTM
Signal InterfaceTM
BLA Code
112812
BLA Code
112828
The Switch Control Interface (SCI) provides an interface between the CZone™ network and traditional mechanical switches that manufacturers and users are familiar with. This interface converts the signal from those switches into the Control Area Network (CAN) signal needed across a digital network. No need to change existing designs.Diagnostics are important. Fault codes are provided to quickly identify issues with the network or switches. Information is provided on the Switch Control Interface as well as sent to the CZone™ Display Interface. The SCI simplifies your wiring, supports your existing choice of switches, protects against failures and allows for expanding installation options. Backlighting and systems in operation lights are dimmable to ensure your night vision is not impared by bright lights on your control area, level control of these can be linked to the backlighting level of any Display Interfaces in close proximity of the SCI.
Features:• Single switch position can control multiple OI channels• Attaches to switch panels via custom SCI cable• Multiple SCI switches can control single OI channel• Output for backlighting of switch labels (dimmable)• Outputs systems on and function/ fault codes to systems on
LED of switches (dimmable)• 156(w) x 100(h) x 42(d) mm• IPX5 water ingress protection• Programmable switch types• 8 inputs per module (16 individual controls)• Sequential button press functionality
Switch Control InterfaceTM
BLACode
112824
8-Way connector bank for SCI cable assembly to switches
Waterproof cable seal
NMEA 2000 connector
Historically, generating a configuration for and programming a system is a chore that requires a significant amount of training. The CZone™’s configuration tool offers simple, straightforward programming that is easy to learn and to use.The CZone™ configuration tool allows the manufacturer to set up programming parameters on a standard PC, (use USB CAN adapter 112902) upload a saved configuration into the CZone™ network and simultaneously program every interface on-board. Changes and customizations can also be made from the display interface and downloaded back to the PC overriding the master configuration. The master template file is now ready to go and can be used on multiple vessels or vehicles during manufacturing.
Nameplates for C-ZoneTM circuit identification. Black adhesive labels with white lettering.
Configuration Made EasyTM
Label SetTM
BLA DescriptionCode
112890 Set 1112892 Set 2 112890
SET-1OI, SI, MI, MOI, SCI, DI, DIP numbers 01-14
Quality marine equipment
section
11
54
ELE
CT
RIC
AL
www.bla.com.au
section
11
55
ELE
CT
RIC
AL
Two pin, two metres.
BLA Code
112885
NMEA 2000 network.
BLA LengthCode m
112860 0.5112862 2112866 5112870 10
NMEA 2000 network, one metre.
BLACode
112880
BLA Code
112948
Extension cable for the NMEA 2000 network, five metres.
NMEA 2000 network.
BLA DescriptionCode
112876 Female112878 Male
NMEA 2000 network.
BLA DescriptionCode
112952 Female112954 Male
NMEA 2000 network.
BLA DescriptionCode
112974 Single tee112942 2 way tee112944 4 way tee112940 90° elbow
112954112952112876
112974
112944
112942112940
112878
TM
Power Cable for Display Interface
TM
Power Cable
TM
Terminating Resistors
TM
Connectors
TM
Extension Cables
TM
Single Tee Connector
TM
Blanking Caps
TM
Cable Glands
TM
Black Hole Plugs
TM
Terminal Blocks
TM
Seal Boot
TM
Shunt
TM
AC Transducer
TM
Adaptors and Connectors
• 450A/50mV shunt• 83(l) x 45(w) x 44(h) mm
• The AC-VSEN-4 includes three voltage transformers for up to three voltage inputs
• 140(l) x 69(w) x 50(h) mm
NMEA 2000 network.Black silicon cable glands.
3.2mm for MI and SI cable glands. 5mm for SCI cable glands.
Used for terminating wires in the CZoneTM system.
Black silicon boot to suit OI and MOI.
BLA Suits Code 112970 MI112972 SCI112974 SI
BLA DescriptionCode
112904 Adaptor112956 Through bulkhead adaptor112960 Female field serviceable connector112962 Male field serviceable connector
BLA SuitsCode
112980 MI 6 Way112982 OI/MI 6 Way112984 SI/MI 8 Way
BLACode
112990112992
112972
112956
112960
112962
112904
112974
112970
112984
112980
112982
BLACode
112994
BLA Code
113457
TM
Current Transformer• Maximum current 150A AC• 37.5(w) x 39.2(h) x 13.7(d) mm • Hole size: 12 mm
BLA Code
112886
BLA Code
112888
TM
Heavy Duty Current Transformer• CT-HD is available for systems with large mains cables,
too large for CT-10-3 (112886)• CT-HD dimensions: Ø 47 x 10.5 mm• Hole size: 32 mm
BLA Code
112887
Quality marine equipment
section
11
56
ELE
CT
RIC
AL
www.bla.com.au
section
11
57
ELE
CT
RIC
AL
TM
Custom Switches
TM
Cable Assemblies
TM
Network Bridge Interface
TM
Surge Protection Modules
TM
Push Buttons
TM
USB CAN Adapter
TM
Wireless Remote Kit
Suitable for use with CZoneTM only.
Features:
• Red backlighting LED• Status indication LED
SCI to suit switches above.
Suitable for use with CZoneTM only.
Features:• Momentary and latched actuation options available• Blue and red circuit status indication LED's• 19mm mounting hole• IP67 protection• Stainless steel components
Connects PC to the CZoneTM network for configuration and system set up.
BLA DescriptionCode
112832 On/Off112834 Mom On/Off112836 On/Off/On112838 Mom On/Off/Mom On
BLA VoltsCode 112882 12112884 24
BLA LengthCode m
112840 0.5112842 1 112844 2112846 3112848 4112850 5
BLA DescriptionCode
112928 Momentary red112922 Latched red112926 Momentary blue112920 Latched blue
112926 112928
BLA Code
112902
BLA Code
112790
BLA Code
112902
• For isolating sections of an NMEA 2000 network to decrease standby current draw
• Isolation when bridging between two CAN networks• For expansion of the NMEA 2000 network when the
maximum node limit (node = any device connected to the NMEA 2000 network) for the network has been reached
• Once fitted, a further 40 nodes can be added
A simple to set up, wireless remote control.
Features:• Buttons configurable for momentary
on or latching control of circuits• 80m operating range• Rolling code• Kit includes 2 remotes
Protect your electronics from becoming damaged by harmful high voltage spikes. When fitted to the battery supply these modules look for sudden increases in voltage then switch into protection mode to absorb and supress the high energy spike.
'Contour' Circuit Breaker Panels - No Meters
Circuit breaker panels with stylish curved front facia incorporating recesses for circuit breaker toggles preventing them from being switched on accidentally.
Features:•Durableblackpowdercoatedmarinegradealuminiumbasepanel•Marinequality,magnetic,hydraulic,ULlistedtripfreebreakers•Backlitlabelssupplied,referpage65•Negativebussbar•RedLEDindicationforcircuits‘on’•GreenLEDbacklightingformetersandlabels•Doublepoleconfigurationsavailableforsurveyoradditionalsafety
With the flexibility of the 'Contour' four way plastic modules, BEP can build panels to custom requirements if requested.
Drop resistors required for LED’s in 24 volt installations.BLA Code:113460 Suits 113140113461 Suits 113142 & 113144113462 Suits 113151, 113152 & 113153113463 Suits 113160113465 Suits 113175 & 113176
113140
113144
113152
BLA Circuits O/all Cut Out Intrusion Mount Power Label Circuit BreakersCode Size Size Screws Sheet wxh mm wxh mm mm Gauge Volt 5 amp 10amp 15 amp 20 amp 25 amp 30 amp
113140 4 127x115 107x95 65 6 r/h 12-24 1 2 1113142 8 127x200 107x180 65 6 r/h 12-24 2 2 3 1113144 8 239x115 219x95 65 6 r/h 12-24 1 2 2 3 1113151 12 351x115 331x95 65 6 r/h 12-24 1 3 4 4 1113152 12 239x200 219x180 65 6 r/h 12-24 1 3 4 4 1113153 12 127x285 107x265 65 6 r/h 12-24 1 3 4 4 1113160 16 239x200 219x180 65 6 r/h 12-24 1 4 5 5 1 1113175 24 239x370 219x331 65 6 r/h 12-24 1, 2 & 3 5 8 8 1 1 1113176 24 351x200 331x180 65 6 r/h 12-24 1, 2 & 3 5 8 8 1 1 1
113142
113153
113160
113176
113151
113175
Quality marine equipment
section
11
58
ELE
CT
RIC
AL
www.bla.com.au
section
11
59
ELE
CT
RIC
AL
113154
113170
113190
113143 113141 113177
‘Contour’ Circuit Breaker Panels - with Analogue Meters
Circuit breaker panels with stylish curved front facia incorporating recesses for circuit breaker toggles preventing them from being switched on accidentally.
Available with 12 volt (AV12) or 24 volt (AV24) analogue expanded scale meter with three way selector switch to monitor multiple battery banks. Larger panels include both voltmeter and ammeter. Analogue ammeters are supplied standard in 0-50 amp scale (AA50) and include a 50 amp shunt. An alternative 100 amp meter can be substituted with a corresponding 100 amp shunt.
Features:• Analogue meters - 2.5% of full scale accuracy• Durable black powder coated marine grade aluminium
base panel• Marine quality, magnetic, hydraulic, UL listed, trip
free breakers• Green LED back lighting for meters and labels• Backlit labels supplied, refer page 65• Negative buss bar• RedLEDindicationforcircuits‘on’• Double pole configurations available
for survey or additional safety
With the flexibility of the 'Contour' four way plastic modules, BEP can build panels to custom requirements if requested.
BLA Circuits O/all Cut Out Intrusion Mount Power Meter Label Circuit BreakersCode Size Size Screws Sheet wxh mm wxh mm mm Gauge Volt 5 amp 10amp 15 amp 20 amp 25 amp 30 amp
113141 4 127x200 107x180 65 6 r/h 12 AV12 1 1 2 1113143 8 127x295 107x275 65 6 r/h 12 AV12 1 2 2 3 1113145 12 127x380 107x360 65 6 r/h 12 AV12 1 3 4 4 1113146 12 239x200 219x180 65 6 r/h 12 AV12 1 3 4 4 1113148 12 239x200 219x180 65 6 r/h 24 AV24 1 3 4 4 1113154 16 239x295 219x275 65 6 r/h 12 AV12, AA50 1&2 4 5 5 1 1113170 24 351x295 331x275 65 6 r/h 12 AV12, AA50 1,2&3 5 8 8 1 1 1113172 24 351x295 331x275 65 6 r/h 24 AV24, AA50 1,2&3 5 8 8 1 1 1113190 24 239x385 219x365 65 6 r/h 12 AV12, AA50 1,2&3 5 8 8 1 1 1113192 24 239x385 219x365 65 6 r/h 24 AV24, AA50 1,2&3 5 8 8 1 1 1113177 32 239x455 219x435 65 6 r/h 12 AV12, AA50 1,2,3&4 7 11 11 1 1 1113178 32 463x295 443x275 65 6 r/h 12 AV12, AA50 1,2,3&4 7 11 11 1 1 1
113146
'Contour' Circuit Breaker Panels - With Digital Meters
Circuit breaker panels with stylish curved front facia incorporating recesses for circuit breaker toggles preventing them from being switched on accidentally.
Digital panel functions include volts for up to three battery banks and current discharge/charge as well as ampere hours used and remaining for one bank. Digital panels are supplied with a 450 amp, 50 mV shunt.
Features:• Durable black powder coated marine grade aluminium base panel• Marine quality, magnetic, hydraulic, UL listed trip free breakers• Backlit labels supplied, refer page 65• Negative buss bar• RedLEDindicationforcircuits‘on’• Green LED back lighting for meters and labels• Double pole configurations available for survey or additional safety• DC digital meters - 200 mv sensitivity, 1% accuracy including
alarms. 12mm high numerals
With the flexibility of the 'Contour' four way plastic modules, BEP can build panels to custom requirements if requested.
Drop resistors required for LED’s in 24 volt installations.BLA Code:113462 Suits 113147 & 113150113463 Suits 113158113464 Suits 113166113465 Suits 113174 & 113194113467 Suits 113182
BLA Circuits O/all Cut Out Intrusion Mount Power Label Circuit BreakersCode Size Size Screws Sheet wxh mm wxh mm mm Gauge Volt 5 amp 10amp 15 amp 20 amp 25 amp 30 amp
113147 12 127x380 107x360 65 6 r/h 12-24 1 3 4 4 1113150 12 239x200 219x180 65 6 r/h 12-24 1 3 4 4 1113158 16 239x295 219x275 65 6 r/h 12-24 1&2 4 5 5 1 1113166 20 351x200 331x180 65 6 r/h 12-24 1,2&3 5 6 7 1 1113174 24 351x295 331x275 65 6 r/h 12-24 1,2&3 5 8 8 1 1 1113194 24 239x385 219x365 65 6 r/h 12-24 1,2&3 5 8 8 1 1 1
113174113158
113166 113194
113150
113147
Quality marine equipment
section
11
60
ELE
CT
RIC
AL
www.bla.com.au
section
11
61
ELE
CT
RIC
AL
'Millennium' Circuit Breaker Panels - with Digital Meters
Circuit breaker panels with stylish curved front facia incorporating recesses for circuit breaker toggles preventing accidental switching.
Digital panel functions include volts for up to three battery banks and current discharge/charge as well as ampere hours used and remaining for one bank. All panels are supplied with a 450 amp, 50 mV shunt.
Features:• DC digital meters - 200 mv sensitivity, 1% accuracy including alarms. 12mm high numerals• Durable black powder coated marine grade aluminium base panel• Marine quality, magnetic, hydraulic, UL listed, trip free breakers• Backlit labels supplied, refer page 65• Negative buss bar• Red LED indication for circuits 'on'• Green LED back lighting for meters and labels• Double pole configurations available for survey requirements or additional safety
With the flexibility of the 'Millennium' four way plastic modules, BEP can build panels to custom requirements if requested.
Drop resistors required for LED’s in 24 volt installations.BLA Code:113466 Suits 113208113467 Suits 113210113469 Suits 113212 and 113214113458 Suits 113216
BLA Circuits O/all Cut Out Intrusion Mount Power Label Circuit BreakersCode Size Size Screws Sheet wxh mm wxh mm mm gauge volt 5 amp 10 amp 15 amp 20 amp 25 amp 30 amp
113208 28 239x370 219x350 65 6 r/h 12 1, 2, 3 & 4 8 8 8 2 2113210 32 351x285 331x265 65 6 r/h 12 1,2,3,4 & 6 7 11 11 1 1 1113212 44 351x370 331x350 65 6 r/h 12 1,2,3,4 & 6 10 14 14 3 1 2113214 44 463x285 443x265 65 6 r/h 12 1,2,3,4 & 6 10 14 14 3 1 2113216 56 351x455 331x435 65 6 r/h 12 1,2,3,4 & 6 12 18 18 4 2 2
113210
113212
113216113214
113208
Drop resistors required for LED’s in 24 volt installations.BLA Code:113465 Suits 113195113467 Suits 113200113468 Suits 113206
113206113200
Circuit breaker panels with stylish curved front facia incorporating recesses for circuit breaker toggles preventing them from being switched on accidentally. Available with 12 or 24 volt analogue expanded scale metering with a three way selector switch or digital LCD. Digital panel functions include volts for up to three battery banks and current discharge/charge as well as ampere hours used and remaining for one bank. Digital panels are supplied with a 450 amp, 50 mv shunt. Analogue ammeters are supplied standard in 0-50 amp scale and include a 50 amp shunt module.
Features:• Analogue meters - 2.5% of full scale accuracy• DC digital meters - 200 mv sensitivity, 1% accuracy including alarms
12mm high numerals• Durable black powder coated marine grade aluminium base panel• Marine quality, magnetic, hydraulic, UL listed, trip free breakers• Backlit labels supplied, refer page 65• Negative buss bar• Red LED indication for circuits 'on'• Green LED back lighting for meters and labels• Double pole configurations available for survey requirements or additional
safety• Mimic panel for quick identification of circuits in operation
Launch - Standard depiction; port and starboard navigation lights, stern light, steaming light, three bilge pumps.
Yacht - Standard depiction; steaming light, deck light, port and starboard navigation lights, stern light, masthead light, tri-colour, and two bilge pumps.
Catamaran - Standard depiction; same as yacht.
With the flexibility of the 'Contour' four way plastic modules, BEP can build panels to custom requirements if requested.
'Contour Cruiser' Circuit Breaker Panels - With Analogue or Digital Meters
113196
BLA Circuits O/all Cut Out Intrusion Power Meter Mimic Label Circuit BreakersCode Size Size Panel Sheet wxh mm wxh mm mm volt 5 amp 10 amp 15 amp 20 amp 25 amp 30 amp
113195 24 239x385 219x365 65 12-24 DAVDC Launch 1,2&3 5 8 8 1 1 1113196 32 351x385 331x365 65 12 AV12, AA50 Yacht 1,2,3,4&6 7 11 11 1 1 1113197 32 351x385 331x365 65 12 AV12, AA50 Cat. 1,2,3,4&6 7 11 11 1 1 1113200 32 351x385 331x365 65 12-24 DAVDC Yacht 1,2,3,4&6 7 11 11 1 1 1113204 36 351x385 331x365 65 24 AV24, AA50 Launch 1,2,3,4&6 8 12 12 2 1 1113206 36 351x385 331x365 65 12-24 DAVDC Launch 1,2,3,4&6 8 12 12 2 1 1
Meter Legend:
AA50 - Analogue ammeter 50amp DC AV12 - Analogue volt meter 12 volt DC AV24 - Analogue volt meter 24 volt DC DAVDC - Digital amps and volts DC Alternative meters can be substituted, refer page 71-73 for meters available. Alternative analogue ammeters will require corresponding shunt.
113195
Quality marine equipment
section
11
62
ELE
CT
RIC
AL
www.bla.com.au
section
11
63
ELE
CT
RIC
AL
'Contour AC' Circuit Breaker Control Panels
Contour style circuit breaker control panels with two double pole mains circuit breakers and change over control slide. Ship/shore transfer switch features a slide gate that will only allow either shore power or ship power to be operational at any one time (113219 & 113221 excluded). For standard twin input systems such as one shore power and one genset input use 113218. Supplied with either analogue or digital metering: analogue meters for either AC volts or amps; digital meters switchable to show AC volts, amps and frequency.
Features:• Analogue volt meters, 2.5% of full scale accuracy• AC digital meters, high resolution 12mm high figures in LCD display,
low power dissipation, 200 mV sensitivity, 1% accuracy• Durable black powder coated marine grade aluminium base panel • Stylish curved plastic facias covering all circuit breakers• Marine quality, magnetic, hydraulic, UL listed, trip free breakers• Backlit labels (set five supplied), refer page 64• Negative buss bar• RedLEDidentificationforcircuits‘on’• Green LED back lighting for meters and labels• Two double pole mains circuit breakers with change over control slide
for ship or shore power input (113219 & 113221 excluded)• Rated to 250v AC (110 volt option available)• Digital metered panels supplied with AC volt and amp
transducer module• Reverse polarity indicator
With the flexibility of the 'Contour' four way plastic modules, BEP can build panels to custom requirements if requested.
113224
113230
113221
113219
BLA Circuits O/all Cut Out Intrusion Meter Label Systems Circuit Breakers Mains Circuit BreakersCode Size Size Set Single Pole Double Pole wxh mm wxh mm mm 5A 10A 15A 20A 25A 20A 25A 30A 50A
113218 2 + mains 127x115 107x95 65 None 5 2113219 2 + mains 127x115 107x95 65 None 5 2 1 113220 4 + mains 239x115 219x95 65 None 5 2 2 2113221 6 + mains 127x200 107x180 65 None 5 2 3 1 1113222 8 + mains 239x200 219x180 65 Digital 5 1 3 3 1 1 1113224 8 + mains 239x200 219x180 65 Analogue 5 1 3 3 1 1 1113226 8 + mains 127x385 107x365 65 Digital 5 1 3 3 1 1 1113230 12 + mains 351x200 331x180 65 Digital 5 1 4 5 1 1 1113232 12 + mains 351x200 331x180 65 Analogue 5 1 4 5 1 1 1113234 16 + mains 351x200 331x180 65 Digital 5 1 5 7 2 1 1 1
113234
113226
113220
12 volt supply is also required to power LEDs. On 24 volt vessels, the drop resistors below will be required to supply 12 volt to the LED circuit.
BLA Code:113460 Suits 113219113461 Suits 113220 and 113221113462 Suits 113224 and 113226113463 Suits 113230113464 Suits 113234
113218
‘Contour AC’ Panel Back CoversDesigned to insulate the exposed terminals at the rear of BEP 'Contour AC' circuit breaker panels. Made from flame retardant PVC. Flange mounted to the rear of the same substrate as the panel. Covers are supplied complete with hazard label. Available in two heights to suit panels with between 8 and 12 circuit breakers per column, with or without a meter.
BLA Columns No. of Meter Width Height DepthCode Breakers mm mm mm
113235 1 8-12 Yes 127 380 90113236 2 8-12 Yes 239 380 90113237 1 8-12 No 127 285 90113238 2 8-12 No 239 285 90
Nameplates For Circuit IdentificationBlack adhesive labels with white lettering to suit BEP Contour, Contour AC, Cruiser and Millenium Breaker Panels. 43 (w) x 10 (h) mm.
All covers supplied with Hazard labels
BLA Code
113700
ACCESSOriES
SET-1AccessoriesAnchor LightAuto PilotBilge PumpCabin LightsCockpit LightsCompass LightsDC OutletsDepth SounderFreezerFreshwater PumpGPSInstrumentsLPG ControlMast LightNavigation LightsSaltwater PumpShower DrainSpareSpotlightSpreader LightSteaming LightStereoTrim TabsVHFWinchWiper
BLA Code
113704
BAiT TAnk PuMP
SET-2Bait Tank PumpBilge Pump AftBilge Pump ForwardBilge Pump MidBilge Pump PortBilge Pump Star-boardBlowerBoarding LightCabin Lights AftCabin Lights FwdCabin Lights MidCabin Lights PortCabin Lights Star-boardDeck Wash PumpElectric ToiletEngine Room LightsFridgeHornNav Lights PortNav Lights StarboardPanel LightsRadarSaloon LightsSSBStartStern LightStopTri Light
BLA Code
113706
12V OuTLETS
SET-312V Outlets24V OutletsAft Deck LightBilge Auto Man.Bow LightsDocking LightsEmergency ParallelEngine AlarmEngine BlowersExtraction FanFlood LightsFore Deck LightGalley LightGenerator LightsHolding Tank PumpHouse BatteriesLazerette LightPortRadio BatterySearch LightStarboardStart BatteriesStep LightStrobe LightToilet LightWeather FaxWindex LightWindow Washers
BLA Code
113708
AFT LiGhTS
SET-4Aft LightsBedroom/ConverterDavit WinchEngine AlternatorFire SystemFish FinderFishing LightGalley/BathHouse AlternatorIntercomLoadLocker LightMid WiperMid LightsMizzen Spreader LightPlotterPort WiperPreheatSole LightHeater FansStarboard WiperSub MainSump PumpTank Room LightsToilet PumpTowing LightTV/StereoWalvac
BLA Code
113710
AC MAinS
SET-5AC MainsAC OutletsAC OutletsAir ConditioningBattery ChargerCook TopDishwasherDive CompressorDryerFrequencyGensetHeaterHotwater CylinderIce MakerInverterInverter OutletsMicrowaveOvenRefrigerationReverse PolarityShips PowerShore PowerTrash CompactorTV VideoWashing MachineWaste MasterWater Maker
BLA Code
113712
AC MAinS
SET-6AC MainsAccessoriesAnchor WashAutomaticAutopilotAuxiliaryBilge Auto ManualBilge LightsBoom FurlBridge LightsBurglar AlarmCabin FanCB RadioCell PhoneComputerDC MainsFuel TransferGalley FanHatch ControlsHydraulicsLoud HailerMaceratorManualNight LightsPelmet LightsSolar PanelStoveTV Antenna
BLA Code
113730
AFT PEAk LiGhT
SET-7Aft Peak LightDeck Flood Lights FwdDeck Flood Lights AftDeck LightsDeck Lights PortDeck Lights StarboardDeck Lights ForwardDeck Lights AftFishing LightsFishing Lights WhiteFishing Lights RedFishing Lights GreenFish Room LightsFish Room PumpFore Deck LightFocsle LightMast Flood Lights FwdMast Flood Lights AftNet RecorderNot Under CommandNUC LightsPlotterPort Flood Lights Shower LightsStbd Flood LightsToilet FanToilet LightWinch Flood Lights
Quality marine equipment
section
11
64
ELE
CT
RIC
AL
www.bla.com.au
section
11
65
ELE
CT
RIC
AL
Circuit Breaker Toggle LockMoulded black plastic, removable locking mechanism designed to prevent accidental or unintended actuation of essential circuit breakers from either the on or off position. As used on the BEP Battery Management panels, 113667-79. Suitable for use with breakers on Contour, Contour AC, Cruiser and Millenium breaker control panels. When installed, a breaker will still trip in the event of overload even with the lever locked in the on position.
Slide LockoutReplacement slide lockout to suit double pole AC circuits on the BEP AC contour panels.
BLA Code
113501
BLACode
113502
Nameplates For Circuit IdentificationBlack adhesive labels with white lettering to suit BEP Contour, Contour AC, Cruiser and Millenium Breaker Panels. 43(w) x 10(h) mm.
BLA Code
113731
AnChOr LiGhT
SET-8Anchor LightBaragraph PowerCabin FansCabin Fans FwdCabin Fans AftCourtesy LtsCourtesy Lts FwdCourtesy Lts MidCourtesy Lts AftDiesel HeaterFire SystemFuel PumpHailerLectrasanLectrasan FwdLectrasan StbdPort Engine ControlsPort IgnitionSat ComShower LightSpareSpareSpareStabilizerStbd Engine ControlsStbd IgnitionToilet LightWaste Treatment
BLA Code
113732
BOiLEr/hEATEr
SET-9Boiler/HeaterBow ThrusterDC/DC ConverterDeck Lights ForwardDecklights AftDecklights MidDecklights UpperDefrosterGalley LightsGrey Water PumpGuest State LightsHead Pump 1Head Pump 2Master State LightsNav LightsOil PumpPilot House LightsSaloon LightsSearch LightSpareSpareStereoTrim Tab ControlV-Berth LightsVHF LowerVHF UpperWash Down PumpWindlass
BLA Code
113733
Air COMPrESSOr
SET-10Air CompressorAir Con GalleyAir Con Guest RoomAir Con Master StateAir Con Pilot HouseAir Con SaloonAir Con SaloonAir Con State RoomAir Con V-BerthAir ConditioningAir Conditioning 1Air Conditioning 2Air Conditioning 3Central VacuumCharger GeneratorCharger HouseCharger InverterCompactorEngine Room FansHot Circ PumpIce Maker LowerIce Maker UpperOutlets Engine RoomOutlets ExternalOutlets GalleyOutlets Lower DeckOutlets Upper DeckWater Heater
BLA Code
113735
12-24V rEDuCEr
SET-1212-24V ReducerAeratorBallast AftBallast ControlBallast FwdBlack Tank AftBlack Tank FwdBlack Water PumpBoom LightBridge LightsBridge SupplyDining LightsFire AlarmFlow AlarmInterior LightsLuff LightModemNav Area FanOutlets AftOutlets FwdOutlets Mid Outlets PortOutlets StbdPort EngineStbd EngineStep LightsStrobeRiding Light
BLA Code
113736
AFT BiLGE ALArM
SET-13Aft Bilge AlarmBilge AlarmBilge Alarm TestBilge AutoBilge LightsBilge ManualBilge Pump Auto/ManualFwd Bilge AlarmHigh Water AlarmMid Bilge AlarmPort Aft Bilge AlarmPort Aft Bilge AutoPort Aft Bilge ManualPort Fwd Bilge AlarmPort Fwd Bilge AutoPort Fwd Bilge ManualPort Mid Bilge AlarmPort Mid Bilge AutoPort Mid Bilge ManualStbd Aft Bilge AlarmStbd Aft Bilge AutoStbd Aft Bilge ManualStbd Fwd Bilge AlarmStbd Fwd Bilge AutoStbd Fwd Bilge ManualStbd Mid Bilge AlarmStbd Mid Bilge AutoStbd Mid Bilge Manual
BLA Code
113737
210khz TX
SET-14210KHz TX33KHz TXAft Hold LightCockpit FreezerEngine ControlsFridge/FreezerFire PumpFluxgate CompassFlybridge FreezerFuel GaugeFuel Transfer PortFuel Transfer StbdFwd Hold LightGantry LightsHolding Tank PortHolding Tank StbdMasthead LightPilot Light RedPilot Light WhitePort Fuel FilterRudder IndicatorStbd Fuel FilterSteeringToilet AftToilet FwdTowing Light AmberTowing Light WhiteTuna Tubes
BLA Code
113738
12V OuTLETS FLYBriDGE
SET-1512V Outlet FlybridgeArch LightsBilge Pump ClutchCabin HeaterCompassDry Head PumpDemisterEngine Clutch PumpFlybridge HatchFlybridge WipersFreezer ClutchFwd Stateroom LightsGreywater Pump 1Greywater Pump 2Guest Cabin StereoInmarsatInstrument LightsInstruments FlybridgeInstruments PilothouseMaster Head LightsNav Area LightsOverhead LightsOverhead Saloon LightsSaloon WipersSecurity SystemUnderfloor Lights24V DC MainsBow Bilge High Water
BLA Code
113739
AC OuTLETS AFT
SET-16AC Outlets AftAC Outlets Aft CabinAC Outlets CockpitAC Outlets DeckAC Outlets FwdAC Outlets Fwd CabinAC Outlets GalleyAC Outlets Guest CabinAC Outlets MidAC Outlets PortAC Outlets SaloonAC Outlets SaloonAC Outlets StateroomsAC Outlets StbdAC Outlets WheelhouseAircon AftAircon Aft DeckAircon CabinAircon FwdAircon Fwd DeckAircon HelmAircon Pump Aircon Port Aircon StbdAirhandler Fwd StateroomAirhandler Mstr StateroomAirhandler PilothouseAirhandler Saloon
BLA Code
113740
24 hOur CirCuiTS
SET-1724 Hour CircuitsAft Bilge Pump Auto / ManAft HeadAlarm MuteDepth/SpeedElectronicsEngine AlarmFansFwd Bilge Pump Auto / ManFwd HeadGalley/Head VentGalley FridgeGas StoveGaugesHead PumpLevel IndicatorLightsMid Bilge Pump Auto/ManNav & Inst LightsOil PressurePt EnginePt Engine Start/StopStbd EngineStb Engine Start/StopSum LogSynchronizerWater TempWindshield
27MEG
SET-1827 MegAft Holding TankAft Water HeaterCabin OutletsCockpit FridgeDC Mains 1DC Mains 2DehumidifierDVDEngine BlowerEngine Room OutletsEntertainmentFlybridge MainFWD Holding TankFWD Water HeaterGalleyGas SolenoidGeneratorGFCI OutletHatch LifterHelm MainHour MeterLaundryLPG/CooktopNavigationRangeTV/DVDUHF
BLA Code
113741
12V BATTErY ChArGEr
SET-1912V Battery Charger24hr Bilge Pump24V Battery ChargerBilge Pump Port FwdBilge Pump Port MidBilge Pump Stbd AftBilge Pump Stbd FwdBilge Pump Stbd MidBoarding PlatformBulwark LightsBunk LightsCable Master DesalinatorDishwasherElectric WindowsEngine ControlsMaceratorOil PumpPitch ControlPort Air ConPort EngineSonarStoreroom LightsSpaStbd Air ConStbd Engine TV
BLA Code
113742
12V AuX hOrn
SET-2012V Aux HornAft FridgeAlternatorAnchor WinchBathroom FanBathroom OutletsBridge SupplyDocking LightsEngine Room Bilge AlarmFax Fish FinderHolding Tank GaugeIcemakerInverter/ChargerLake Water Master HeadRCDResetSalo on LightsShaver OutletsSounderSpeedSum LogToilet PortToilet Stbd TrollingTV LiftWind Instruments
BLA Code
113743
BLA Code
113745
ALArMS
SET-22AlarmsCCTVCockpit FridgeCommunicationsControl Max 2.0Deck LightsEarth Leakage LightsEmergency ParallelEngine Room MainEquipment RoomFlybridge LightsFresh Water Pump PortFresh Water Pump StbdGenset StartGenset StopGrillHead/Galley VentHF RadioIgnition StartMid Hold LightsRadio LightRadiosRefrigeratorReverse Polarity TestUHF RadioVHF RadioWheelhouse LightsWine Cooler
Air COn FLYBriDGE
SET-23Air Con FlybridgeAir Con FwdAir Con PortAir Con StbdBerth LightsBlowerCabin Lights MainCooling Pump 1Cooling Pump 2DischargeEmergency LightsGalley FridgeHelm LightsMaceratorMaster Cabin LightsPort Engine ControlsPort Engine ControlsPort Engine ControlsQuartz LightsStbd Engine ControlsStbd Engine ControlsStbd Engine ControlsStereo MemoryStorage Bin PumpWaterblaster
BLA Code
113746
Panel not included113502
ACCESSOriES AnChOr LiGhTS
nAViGATiOn LiGhT
ACCESSORIES ANCHOR LIGHT
Namplates for Circuit IdentificationBlack adhesive labels with white lettering to suit BEP splash proof panels 113240-113254. Oval shaped, 26 x 9mm.
AccessoriesAeratorAnchor LightsAutopilotBait Tank PumpBilge PumpBlowerCabin LightsCockpit LightsDC Outlets
Deck WashDepth SounderFreshwater PumpFridgeGPSHornInst. LightsInstrumentsLogNavigation Lights
RadarSpareSpot LightsStereoStern LightTrim TabsVHFWiper
Namplates for Circuit IdentificationBlack adhesive labels with white lettering to suit BEP splash proof panels 113260-113264. Oval shaped, 41 x 11mm.
Anc. Light Nav. LightsAccessoriesAeratorAnchor LightAutopilotBait Tank PumpBilge Pump Bilge Pump Auto ManBlowerCabin LightsCockpit LightsDC OutletsDeck WashDepth SounderFlood LightsFreshwater PumpFridgeGPSHornInst. LightsInstrumentsNavigation LightsRadioSaltwater PumpSpot LightsTrim TabsWinchWiper
Anchor LightBilge Auto ManBoom LightCabin LightCockpit LightsCompass LightDeck LightsDepth SounderE/R BlowerFreezerHot Tub LightHot Tub PumpInstrumentsLocker LightsNav LightsPort Nav LightsPort WiperShower Drain PumpSpare 1Spare 2Spare 3Stbd Nav LightsStbd WiperSteaming LightStern LightSumlogTransom LightsTri Light
BLA Code
113714
BLA Code
113702
BLA Code
113703
Namplates for Circuit IdentificationBlack adhesive labels with white lettering to suit BEP CMP spray proof panels, listed below.
AccessoriesAeratorAnchor LightsAutopilotBait Tank PumpBilge PumpBlowerCabin LightsCockpit LightsDC OutletsDeck WashDepth SounderFreshwater PumpFridge
GPSHornInst. LightsInstrumentsLogNavigation lightsRadarSpareSpot LightsStereoStern LightTrim TabsVHFWiper
BLA Code
113713
CMP Spray Proof PanelsBEP’s next generation of popular spray proof panels. Easily retrofitted into previous BEP panel spaces as dimensions remain the same. These grey ASA panels can be used in 12 or 24 volt systems. The ATM mini fuse holders are conveniently placed and marked on the front panel for ease of replacement. Features:• Switches rated to 20 amps with custom designed, sealing toggle cover• Total panel rating equates to 45 amps• Replaceable/changeable clip in switches for customisation• Water resistant rating to IP56• Moulded gasket incorporating mount screw covers• Supplied complete with 28 piece label set• 5 year warranty
BLA Description O/all Cut OutCode Size Size mm mm
113242 4 Way 107x95 87x45113252 6 Way 107x95 87x45113255 5 Way with socket 107x95 87x75113713 Replacement label set
ACCESSORIES
Quality marine equipment
section
11
66
ELE
CT
RIC
AL
www.bla.com.au
section
11
67
ELE
CT
RIC
AL
Splash Proof Switch Fuse PanelsInjection moulded plastic panel with high quality two position toggle switches covered by neoprene rubber boots to provide splash proof (IP56) protection from the front face. Each pair of toggle switches is connected to a behind panel mounted AF type blade fuse. Available in 4 or 6 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Switches are rated to 20 amp.
Splash Proof Switch Fuse Panels - With Power Socket
Injection moulded plastic panel with high quality two position switches rated to 20 amp, covered by rubber boots and a cigarette lighter type power socket rated to 16 amp. Panel is splash proof to IP56 standard from the front face. Each pair of toggle switch/power socket is connected to a behind panel mounted AF type blade fuse holder. Available in 3 or 5 gang versions with a choice of grey or white facia. Supplied complete with 113714 28 piece label set. Power plug is not included with the panel and is available as a separate part. Now supplied with Marinco power socket.
Splash Proof Switch PanelsStylish contoured, moulded plastic panel with removable cover plate over the switches to conceal screws and water drain. Six gang switched circuits with high quality, two position toggle switches covered by neoprene rubber boots providing splash proof protection from the front face to IP56 standard. Features red LED's for systems on and green LED back-lit labels. Choice of three models - Unfused for installation with separate fuses, fused with each pair of toggle switches connected to a behind panel mounted AF type blade fuse or PTC fused. Positive temperature coefficient (PTC) fuses are solid state 9 amp resettable fuses (turn switch off for 10 secs to reset). Supplied complete with 113702, 29 piece label set. Additional label set 113703 is also available, refer page 66. Switches are rated to 20 amp.
BLA Facia Gang O/all Cut Out Intrusion Power MountCode Colour Size Size Screws mm mm mm volt mm
113240 Grey 4 107x95 87x45 75 12-24 3 c/s113241 White 4 107x95 87x45 75 12-24 3 c/s113250 Grey 6 107x95 87x75 75 12-24 3 c/s113251 White 6 107x95 87x75 75 12-24 3 c/s
BLA Facia Fuses O/all Cut Out Intrusion Power MountCode Colour Size Size Screws mm mm volts mm
113260 Grey No 110x158 92x130 65 12 4 c/s113261 White No 110x158 92x130 65 12 4 c/s113262 Grey Blade 110x158 92x130 75 12 4 c/s113263 White Blade 110x158 92x130 75 12 4 c/s113264 Grey PTC 110x158 92x130 75 12 4 c/s
System on LED
Back lit labels
Neoprene bootClip on cover hides mounting screws and drain
113256 Marinco power plug
BLA Facia Gang O/all Cut Out Intrusion Power MountCode Colour Size Size Screws mm mm mm volt mm
113243 Grey 3 107x95 87x45 75 12-24 3 c/s113244 White 3 107x95 87x45 75 12-24 3 c/s113253 Grey 5 107x95 87x75 75 12-24 3 c/s113254 White 5 107x95 87x75 75 12-24 3 c/s
113256
Micro Modular Switch PanelsThe micro range of switches offer the unique ability to select the size and orientation of switch panels by adding the compact modules together horizontally or vertically. Injection moulded plastic panel with high quality toggle switches covered by a neoprene rubber boot combined with LED indicator lights, mix and matched to suit most applications. Contour design protects from accidental switching. Supplied with one label set as per table. Labels are round to suit installation vertically or horizontally. Suitable for 12 volt systems only. Switches rated to 20 amp. Labels are back lit with green LED, changing to red when system on. Face 58 x 86mm, cut out 48 x 60mm, intrusion 28mm.
Nameplates For Circuit IdentificationBlack adhesive labels with white lettering to suit the Micro Modular panels above. Round shape 19mm diameter. A label set as above is supplied as standard with the panel.
Mic 1 labels Mic 3 labelsMic 2 labels
BLA DescriptionCode
113717 Mic 1 labels113718 Mic 2 labels113719 Mic 3 labels
BLA Colour Style SwitchCode
113310 Black Single On/Off113311 Chrome Single On/Off113313 Black Single On/Off/On113319 Black Double On/Off113320 Chrome Double On/Off
113310 113320
N.B. Switches can be rotated
90º to suit installation
N.B. Switches can be rotated
90º to suit installation
BLA Colour Labels DescriptionCode
113280 Black 113717 2 x on/off toggle switch113282 White 113717 2 x on/off toggle switch113284 Black 113718 1 x 2 way & 1 x 3 way momentary switch113286 White 113718 1 x 2 way & 1 x 3 way momentary switch113288 Black 113717 1 x 2 way & 1 x 3 way switch113290 White 113717 1 x 2 way & 1 x 3 way switch113292 Black Fitted Bilge alarm - visual & audible113294 White Fitted Bilge alarm - visual & audible113296 Black 113717 2 x LEDs showing systems in operation113298 White 113717 2 x LEDs showing systems in operation
Contour Interior SwitchesReplicating the same lines as the Contour Switch Panels and Meters, these interior switches compliment the décor of modern boat interiors. The contour switch can be either, surface or recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating 10amp, 12VDC.
113319113324 Replacement switch on/off/on113326 Replacement switch momentary
Contour Exterior SwitchesReplicating the same lines as the Contour interior switches, these exterior switches complement the décor of modern boat exteriors. The contour switch can be surface, recessed, vertical or horizontal mounted. The switches have a backlit label with systems on indicator. On/Off and On/Off/On switches are three pin. Momentary switches are two pin and spring return to off position. Supplied with symbol label set. Suitable for horizontal or vertical mounting. Supplied with 10 piece, symbol label set. Dimensions 60(l) x 30(w) x 18(h) mm (single), 90(l) x 30(w) x 18(h) mm (double). Switch current rating: 10amp 12VDC.
BLA Colour Style SwitchCode
113302 Black Single On/Off113303 White Single On/Off113305 Black Double On/Off113306 White Double On/Off
Quality marine equipment
section
11
68
ELE
CT
RIC
AL
www.bla.com.au
section
11
69
ELE
CT
RIC
AL
Nameplates For Circuit IdentificationBlack adhesive labels with white lettering to suit BEP Contour Generation 2 splash proof switch panels.
Contour Generation 2 Splash Proof Switch PanelsInjection moulded plastic panel with modern contour styling. The switch tray features a rubber mounting gasket and integral cover seal. The cover includes a clear plastic membrane with rubber over-mould allowing the flexibility to operate the switches while providing a clear window for label backlighting. Red LED indicates systems on. Both grey and blue interchangeable contour wave strips are included and custom colours are available, subject to minimum quantities. Mounting screws are bidden beneath the cover. Panels can be mounted horizontally or vertically due to the unique label design. A joiner is available for multiple panel installations. Available in 2, 4 or 6 gang versions with a choice of grey or white facia and with or without fuses. Fused versions have each pair of switches connected to a behind panel mounted AF type blade fuse holder. Supplied as standard with two position, on/off switches and 113694, 28 piece label set. Three position switches, momentary switches and label set 113695 are also available. Suitable for 12 or 24 volt systems. Switches rated to 16 amp. Overall width 63mm. Cut out width 42mm. Intrusion 25mm. Mount screws 3mm roundhead.
BLA Code
113694
BLA Code
113695
SET-1ACCESSORIESAERATORANCHOR LTBAIT TANKBILGE PUMPAUTO B/P MANBLOWERCABIN LIGHTSCOCKPIT LTSDC OUTLETSDECK WASHDN WINCH UPELECTRONICSENGROOM LTSFLOOD LIGHTSFW PUMPFRIDGEGPSHORN
INST. LIGHTSINSTRUMENTSNAV LIGHTSRADIOSW PUMPSPOT LIGHTSUP PORT DNUP STBD DNWIPER
SET-2B/PUMP PORTB/PUMP STBDB/PUMP FWDB/PUMP MIDB/PUMP AFTB/PUMP ENG RMCOMPASS LTDECK LTSSTEAMING LT NAV LTS PTNAV LTS STBDSTEP LTSSTERN LTWIPER PTWIPER MIDWIPER STBDWASHERSFREEZERH/TANK PUMP
SUMP PUMPLOCKER LTSPANEL LTSTRI LTBOW LTSSHOWER LTSHOWER PUMPSPARESPARE
SET-3BOARDING LIGHTSCOURTESY LIGHTSDVDENTERTAINMENTFUEL TRANSFERGALLEY LIGHTSGAUGESHARDTOP LIGHTSHATCH LIFTERINTERIOR LIGHTSLIGHTS LIVEWELLNAV LIGHTS ANCNIGHT LIGHTSOVERHEAD LIGHTSPARALLEL PLOTTERPOLE LIGHTRIDING LIGHTSSALOON LIGHTS
SOUNDER STEREO TARGA LIGHTSTOILETTOILET LIGHTSTVVHFWINDLASS
BLA Facia Gang Fuses O/all Cut OutCode Colour Length Length mm mm
113756 Black 2 No 71 36113757 White 2 No 71 36113761 Black 2 Yes 71 36113762 White 2 Yes 71 36113766 Black 4 No 119 84113767 White 4 No 119 84113771 Black 4 Yes 119 84113772 White 4 Yes 119 84113776 Black 6 No 167 132113777 White 6 No 167 132113781 Black 6 Yes 167 132113782 White 6 Yes 167 132
113787 Panel joiner black113788 Panel joiner white
Unique label design allows it to be read either vertical or horizontally mounted. Supplied with both blue and grey clip on contour wave.
Moulded gasket on rear of tray seals against mounting surface
Ribbed seal provides water tight seal with switch cover
Mounting screws are covered by switch cover
Red systems on LED’s
Flexible overshot cover allows for easy switch operation
Labels are LED backlit for easy night time viewing
Replaceable “clip-on” contour wave. Customised colours available
BLA Code
113699
FreezerAccessories
PArALLeL
Contour 1000 SeriesThe Contour 1000 Series, modular injection moulded plastic control panels provide an economical option to the Contour circuit breaker panels. Ideally suited for interior use on smaller sail boats or cruisers. The range consists of 6 gang switch panel, analogue voltmeter, analogue ammeter, digital DC monitor and a frame only. The panels are fully modular and can be stacked in a vertical or horizontal configuration. Each module is 108 x 108mm overall. A removable contoured frame conceals the mounting screws.
Contour 1000 Switch PanelInjection moulded plastic panel with contoured design includes six simple two position rocker switches and individual ATC fuses for each circuit. ATC fuses are accessible from the front cover. Square dimensions allow for modular mounting of multiple panels in vertical or horizontal configuration. Each switch features an integral system on red LED and is rated to 16 amps. Suitable for 12 volt power supply only. Supplied standard with 113715, 24 piece label set. Symbol label set, 113716 is also available. The panel is not waterproof and should be used in interior applications only.
Nameplates for Circuit IdentificationBlack adhesive labels with white lettering or symbols to suit the BEP Contour 1000 switch panel 113332. Square shape (12 x 12mm) allows the same labels to be used in both vertical and horizontally installed panels.
BLA Overall Cut Out IntrusionCode Size mm mm mm
113332 108x108 96x96 28
BLA DescriptionCode
113715 Label set 1000113716 Label set 1002
Stylish contour look
All modules 108mm x 108mm
LED systems – on illumination
16 amp rocker switches
Clip-off fuse covers
Removable frameconcealing mounting screws
Concealed ATC fuses accessible from front of panel
Set 1002Set 1000
N.B. Panels are modular for vertical or horizontal stacking. Spacer supplied for accurate mounting spacing.
Switch panel Ammeter Voltmeter
Quality marine equipment
section
11
70
ELE
CT
RIC
AL
www.bla.com.au
section
11
71
ELE
CT
RIC
AL
Contour 1000 DC MeterThe digital DC Meter provides voltage monitoring of up to three battery banks with custom selectable legends and high/low voltage alarms on all three banks. Also displays charge and discharge amps, remaining capacity and low amp hour alarm on one bank only. Supplied complete with 450A - 50mV external shunt. Suitable for use on battery banks from 60 to 3000 amp hour capacity with 10-35VDC input. Contour 1000 frame provides for simple modular installation with other 1000 series panels. Not waterproof, suitable for protected installation only.
Contour 1000 AmmetersAnalogue ammeters with 0-50 amps DC scale in 2 amp increments. Supplied complete with 50A - 50mV external shunt. Suitable for use with solar panel or battery charger installations. Recessed mounting in injection moulded plastic, Contour 1000 frame provides for simple modular installation with other 1000 series panels in horizontal or vertical configuration. Not waterproof, suitable for protected installation only.
Contour 1000 VoltmeterAnalogue voltmeter with expanded 8-16 volt range colour coded for easy viewing. Recessed mounting in injection moulded plastic, Contour 1000 frame provides for simple modular installation with other 1000 series panels in horizontal or vertical configuration. Not waterproof, suitable for protected installation only.
Contour 1000 Meter FrameDesigned to accept any Contour Matrix Series meters/monitors enabling modular installation with other 1000 series panels in horizontal or vertical configuration. Meters available include digital volts both AC and DC, tank level monitors and gas detectors.
BLA Overall Cut Out IntrusionCode Size mm mm mm
113340 108x108 71x71 12
BLA Overall Cut Out IntrusionCode Size mm mm mm
113343 108x108 60x60 40113344 108x108 60x60 40
BLA Overall Cut Out IntrusionCode Size mm mm mm
113348 108x108 60x60 40
BLA Overall Cut OutCode Size mm mm
113426 108x108 60x60
Analogue Voltmeter PanelsExpanded scale gauge, switchable to show voltage on three different battery banks. Durable black powder coated aluminium chassis panel with contour styled dress cover. Green LED backlit meter, colour coded for easy viewing.
Analogue Ammeter PanelsSwitchable for use on up to three different ammeter shunts. Supplied with one shunt depending on meter scale. Meter scales available; 0-50 and 0-100. Durable powder coated aluminium chassis panel with contour styled dress cover. Green LED backlit meter.
Analogue MetersBEP analogue meters have a white face with black graphics and pointer. Ammeter shunts required for ammeter.
Ammeter ShuntsShunts are required when using both analogue and digital ammeters. Main negative supply wire is cut and shunt inserted in line. Type (A) mini shunts are used with analogue meters and type (B) with the digital meters.
BLA Amp Base Height Terminal MountCode Dim. Stud Screws A mV mm mm mm mm
(A) 113450 50 50 51x32 43 6 main 5 r/h 4 meter(A) 113454 100 50 51x32 43 6 main 5 r/h 4 meter(A) 113456 150 50 51x32 43 6 main 5 r/h 4 meter(B) 113457 450 50 83x45 44 10 main 5 r/h 4 meter
BLA DescriptionCode
113430 8-16 volts DC113432 16-32 volts DC113434 0-300 volts AC113436 0-50 amps DC113438 0-100 amps DC 70 9.5
30
49.5
BLA Meter O/all Cut Out Intrusion Mount Code Scale Size Size Screws amps wxh mm wxh mm mm mm
113410 0-50 127 x 115 107x95 47 3 r/h 113414 0-100 127 x 115 107x95 47 3 r/h
BLA Volt O/all Cut Out Intrusion MountCode Size Size Screws wxh mm wxh mm mm mm
113400 12 127x115 107x95 47 3 r/h113402 24 127x115 107x95 47 3 r/h
(A)
(B)
Quality marine equipment
section
11
72
ELE
CT
RIC
AL
www.bla.com.au
section
11
73
ELE
CT
RIC
AL
DC Digital Monitoring SystemThis state of the art full colour DC monitor provides a range of system monitoring functions suitable for today’s modern vessels. With the complexities of modern DC electrical installations and the need for a wider array of monitoring combinations the new DCSM provides a functional multi-purpose display system suitable for a variety of applications. With the development of new, more accurate tank monitoring technology, BEP is now better able to satisfy multiple information requirements for such things as fuel, fresh, grey and black water. The DCSM display features a clear, extra large type face allowing for more detailed on-screen information and increased clarity. The simple menu, positive touch buttons and back lit screen make this multi-function monitoring system easy and intuitive to use.
Features:• Eight generic, user configurable inputs• Programmable high/low audio/visual
alarms for volts, amps and tank levels• Backlit keypad and dimmable screen• Can be panel or surface mounted
Kit Includes:BLA Code 113403 - 5m x two core pre-terminated screened cableBLA Code 113457 - 450A / 50 mV shunt
AC Digital Monitoring SystemDesigned and manufactured by BEP, this state of the art full colour AC monitor provides a range of system monitoring functions suitable to today’s modern vessels. With the complexities of modern AC electrical installations and the need for a wider array of monitoring combinations the new ACSM provides a functional multi-purpose display system suitable for a variety of applications. The ACSM display features a clear, extra large type face allowing for more detailed on-screen information and increased clarity. The simple menu, positive touch buttons and back lit screen make the multi-function monitoring system easy and intuitive to use.
Monitor:• 2.8” Colour QVGA LCD display• Input voltage 8-32VDC• AC volts, amps, frequency and true power
Features:• Three generic user configurable inputs• Displays data in analogue, digital and graphic forms• Output for load shedding• Programmable high/low audio/visual alarms for each input
Supplied Installation Kit Includes:BLA Code 112888 – AC Voltage transducer for up to 3 voltage inputsBLA Code 112886 x 2 – AC current transformer
BLA Volt Width Height IntrusionCode DC mm mm mm
113386 8-32 89 99 12
BLA Width Height IntrusionCode mm mm mm
113418 89 99 12
113457
112886
113403
112888
Monitor:• 2.8” Colour QVGA LCD display• Input voltage 8-32VDC• Charge/discharge amps for up to two banks• Capacity remaining in A/h and %• Battery condition• Tank fluid level• Circuit status
BEP Tank SendersAvailable in side mount configuration to suit either fuel or water tanks. These easy to install probe senders feature no moving parts and are length adjustable. Senders are 0-5 volt output and are compatible with 113386 meter on previous page.
Contour Matrix LED Tank GaugeAn economical tank monitor for fresh water or grey water tanks. It is recommended for use with plastic or fibreglass tanks only. Supplied with one sender kit. The sender kit consists of five sensors which are strategically mounted through the side of the tank to indicate four tank levels. A second sensor kit may be added to monitor two tanks. The sensor kit is supplied with a five metre lead and receives its power from the gauge.
DC Monitor Cable KitTwo core screened cable used to connect any BEP DC monitor to the ammeter shunt supplied.BLA Description Tank Depth
Code mm
113372 Fuel tank side mount 150 - 300113373 Fuel tank side mount 300 - 600113374 Fuel tank side mount 600 - 900113378 Water tank side mount 150 - 300113379 Water tank side mount 300 - 600113380 Water tank side mount 600 - 900
BLA Base Depth MountCode Screws mm mm mm
113396 60x34 22 3 r/h
BLA Length OD EyeCode Term m mm mm
113403 5 5.6 4113405 10 5.6 4
TS1 Ultrasonic Tank Sender The BEP TS1 is an ultrasonic tank sender unit that has no moving parts and can be used in fuel tanks (petrol or diesel), fresh water, grey water or black water tanks. The TS1 can be used on any shape tank with a minimum depth of 200mm and a maximum depth of 2m. The unit operates on the same principle as a depth sounder and can be configured to be used in conjunction with BEP, Veethree, Faria, VDO and many other analogue gauges from most popular instrument manufacturers (not to be used with electronic gauges). The TS1 has a standard SAE 5 hole mounting pattern and is supplied with sealing gasket, instruction leaflet and 2 year manufacturer’s warranty. It is suitable for top mount installations only. The low profile sender unit can be fitted in metal or plastic tanks, and is resistant to petrol, diesel, water and toilet chemicals. It has a 10-32V operating range and an operating temperature range of 4-65°C.
The TS1 sender unit is available in 2 configurations;
1. 113060 - TS1 sender unit non programmed. Suitable for OEM's wishing to program their own units (113362 required). 2. 113361 - For retail sales, the TS1 is available as a fully programmed unit. Information relating to tank shape, size, fluid type and gauge type must be forwarded to BLA on the corresponding paper work available from the bla.com.au web site or from your BLA Territory Manager.
To complement the TS1 sender, BEP produce the DCSM (113386 page 73), enabling the user to view tank level information for multiple tanks in numeric and graphic forms. Suitable for fuel, fresh water, grey water and black water.
BLA DescriptionCode
113360 TS1 non programmed113361 TS1 programmed
113362 TS1-PK programming kit
113397 Second tank sensor kit
N.B. The TS1 signal is not a true resistive signal and cannot be used with an electronic engine monitoring system. The TS1 is ideally suited to analogue instruments that have a resistive range of 10-180ohm, 240-33ohm or 10-300ohm.
Quality marine equipment
section
11
74
ELE
CT
RIC
AL
www.bla.com.au
section
11
75
ELE
CT
RIC
AL
LPG Shut Off SolenoidA gas shut off valve which is electronically controlled from a remote location such as the galley via a two position switch. Also used in conjunction with a gas detector to shut off gas supply in alarm mode. 1/4” BSP thread, 9 watt power consumption.
Contour Matrix Gas DetectorsThese gas detectors have the capability to control two sensors which detect both LPG and petrol, with visual and audible alarms. Features include test switch to check operation of sensors as well as outputs for external audible alarm and bilge blower operation. Units are supplied standard with one sensor with five metre lead. The 113122 detector also has an LPG shut off feature that shuts off gas supply when in alarm mode. An on/off button is also incorporated to control gas supply remotely. This is achieved through a pulse and hold output that is connected to the 113137/8 LPG shut off solenoid which is purchased seperately. The pulse and hold circuitry incorporated in the 113122 detector pulls the valve in at 12 volts and then, once energised, will step down the voltage whilst still holding the valve open. This reduces power consumption and heat generation while the gas is on.
Specifications:• 350mA current draw with two sensors• 20% lower explosive limit sensitivity• 800mA max power output• 700mA pulse, 250mA hold solenoid output• 88 x 66mm base, 27mm o/all depth, 4mm roundhead
mount screws
Self Contained Gas DetectorJust connect power and you have a fully operational gas detector. The sensor is incorporated into the facia. Designed for surface mounting at the lowest point of area being monitored. Detects LPG and petrol. Panel mounted self test button and sensor status light confirm functionality. Commonly used in caravans and RV’s.
Specifications:• 70mA current draw • 20% lower explosive limit sensitivity
Contour Matrix LPG Control PanelThis Contour design control panel is used in conjunction with 113137 and 113138 shut off solenoids for electronic control of the boat’s gas supply.
Contour Matrix Fume DetectorSingle sensor economical fume detector that is capable of detecting LPG and combustible gases. Features include clearly visible LED’s for safe and alarm mode, audible alarm with mute and test function and output for external audio alarm. Supplied with sensor and five metre cable.
Specifications:• 250mA max
current draw• 20% LEL (lower
explosive limit) alarm sensitivity
BLA Base Depth Mount PowerCode O/all Screws mm mm mm volts
113124 88x66 27 4 r/h 10-35
BLA Detector PowerCode volts
113121 With one sensor 10-35 113122 With one sensor and LPG shut off 10-32
BLA Face Cut Intrusion Volt MountCode Out Screws mm mm mm mm
113134 88x66 38x40 27 12/24 3 c/s
113130 Replacement sensor with five metre lead
113121
N.B. Gas sensor to be kept dry at all times. Do not install in environments approaching more than 100% humidity.
113130 Extra sensor with five metre lead BLA Base Depth Mount PowerCode O/all Screws mm mm mm volts
113125 88x66 27 4 r/h 10-35
BLA Power Max. PressureCode volt KPa
113137 12 0-2550113138 24 0-2550
113122
113137
VSR Voltage Sensitive RelayThe Voltage Sensitive Relay (VSR) allows two batteries to be charged at the same time. It will automatically prioritise the charging of the start battery in twin battery systems. When the engine is first started the relay is open and remains open until the start battery has reached a preset 13.7 volts for 12 volts - 27.4 volts for 24 volts. At the rated voltage the relay closes providing charge to both batteries (start and house). When the voltage drops below 12.8 volts (when the engine is stopped), the VSR disengages, separating the batteries. This system eliminates the possibility of draining the start battery and protects electronics powered by the house battery from harmful engine starting spikes. A VSR has no voltage drop as opposed to conventional charge diode isolators. Surface mounted, 5mm roundhead screws. A dual sensing VSR is also available. This model allows the unit to sense the voltage of both batteries that it is connected between. If either battery is receiving a charge, the VSR will activate, parallelling the two battery banks. It is designed for applications where a battery charger or second charging source is connected into the house battery.
Specifications:
• Continuouscurrent: 100 amps DC
• Intermittentcurrent: 140 amps DC
BLA Type Volts Max. Base HeightCode amps mm mm
113646 Single 12 125 69x69 50113647 Single 24 100 69x69 50113649 Dual 12 125 69x69 50
113646
113649
Systems in Operation PanelsAvailable with four or eight 10mm red LEDS indicating important 'systems in operation' information (pumps, engine room, lights etc). Ideally suited for flybridge or remote dash position. Back lighting on labels. 113271 and 113273 include alarm and mute switch. Four gang panel supplied with 113700 label set. Eight gang panel supplied with 113700 and 113704 label sets, refer page 64.
Drop resistors required for LEDs in 24 volt installations.BLA Code:113460 Suits 113270 & 113271113461 Suits 113272 & 113273
BLA Volt Circuits Dimension Intrusion Cut Out Alarm MountCode & Mute Screws mm wxh mm mm mm
113270 12-24 4 127x115 40 107x95 No 3 r/h113271 12-24 4 127x115 40 107x95 Yes 3 r/h113272 12-24 8 239x115 40 219x95 No 3 r/h113273 12-24 8 239x115 40 219x95 Yes 3 r/h
TWIN BATTERy
CHARGING MADE EASy
Quality marine equipment
section
11
76
ELE
CT
RIC
AL
www.bla.com.au
section
11
77
ELE
CT
RIC
AL
Remote Operated Battery SwitchesDue to the increased load requirements and large increases in the cost of copper battery cable, the MD range of battery switches allow you to install the battery switch very close to the battery, reducing cable lengths to starter motor. They are also ideal for remote isolation of bow thrusters. Available in 275A and 500A, both switches are operated by the 113546 dash mounted switch or alternatively, any standard on/off switch can be used.
Remote Operated VSR'sDual sensor remote operated voltage sensitive relays with emergency parallel funciton available in two capacities and 12 or 24 VDC.The VSR will engage when the voltage on either start or house battery reaches 13.7 volts. If the combined battery voltage drops below 13.0 volts and the engine is not running, after 5 seconds the contacts will open and stay open until the start or house battery voltage is exceeds 13.7 volts. If the combined battery voltage drops below 12.2 volts and the engine is running, after 5 minutes the contacts will open and stay open until the start or house battery voltage is greater than 13.7 volts. If voltage drops below 13 volts and stays above 12.2 volts on either start or house battery while the engine is running, the VSR will stay engaged.The VSR's can be operated through a momentary switch (113545) on the dash which will parallel the batteries for a preset time of 10 minutes. Once the 10 minutes has passed, if the voltage is high enough for the voltage sensitve switch to operate, it will stay engaged. If not, it will disengage. The advantages of using a remote operated VSR is that it will cover your dual battery charging requirements and emergency parallel operation in one unit.
BLA Capacity Base HeightCode Amps mm mm
113670 275 68x68 101113671 500 102x102 110
BLA Volts Max. Base HeightCode Amps mm mm
113672 12 275 68x68 101113673 12 500 102x102 110113680 24 275 68x68 101113686 24 500 102x102 110
113670
113671
113672
113673
On/Off SwitchPanel mounted, key operated remote switch to activate the remote operated battery switches above.
Momentary SwitchPanel mounted momentary toggle switch to activate the emerency parallel function of the remote operated VSR's above.
BLA SuitsCode
113546 113670, 113671
BLA SuitsCode
113545 113672, 113673, 113680, 113686
Contour Heavy Duty Battery Master SwitchThe 720 heavy duty Contour Master Switch is designed for larger vessels with higher amp loads. It offers 600 amps continuous and 2500 amps cranking capacity. The switch can be recess mounted in a 85mm hole or surface mounted. Screw holes 5mm roundhead. Interchangeable labelling system on the control knob allows a full range of applications. Switches come standard with the battery symbol label. Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear terminals against any short circuits and ensures the switch meets ABYC requirements. Non corrosive construction, self cleaning sliding contacts. Ignition protected.
Specifications:• Continuousrating: 600 amps DC• Intermittentrating: 800 amps DC• Crankingrating: 2500 amps DC for 10 seconds• Voltagerating: 48 volts DC maximum• Terminalstudsize:2 x 12mm
Double Pole Battery Master SwitchDesigned to isolate both positive and negative circuits as required in some commercial vessel installations. It is not recommended for switching house and start battery systems at the same time for safety reasons. Removable rear cover insulates the rear terminals against short circuit and removable side plates provide access for heavy duty battery cables. Suitable for surface mounting or recessed mounting in a 85mm hole. Screw holes 5mm roundhead. Ignition protected.
Specifications:• Continuousrating: 400 amps DC• Intermittentrating: 525 amps DC• Crankingrating: 1500 amps DC for 10 seconds• Voltagerating: 48 volts DC maximum• Terminalstudsize: 4 x 12mm
BLA Code
113551
BLA Code
113527
Quality marine equipment
section
11
78
ELE
CT
RIC
AL
www.bla.com.au
section
11
79
ELE
CT
RIC
AL
Easyfit Battery Master SwitchThrough panel mount battery master switch with removable threaded ring allows for fast installation in panel thicknesses up to 19mm. Control knob cannot be removed whilst in the On or Off position, but is removable at an anti-theft position at 45º past the off position. Removable back cover protects terminals and meets ABYC specifications. The switch can also be surface mounted. Ignition protected.
Specifications:• Continuousrating: 275 amp DC• Intermittentrating: 455 amp DC• Crankingrating: 1250 amp DC
(10 seconds)• Voltagerating: 48 volts DC maximum
Panel Mount Battery Master SwitchBattery switch designed specifically for panel mounting with the option of full recess or shallow intrusion mounting. Features and functions are as per the standard 701 Contour Battery master switch above opposite. Includes the BEP interchangeable label system. Cut out dia 52mm. Screw holes 5mm countersunk.
Specifications:• Continuousrating: 275 amps DC• Intermittentrating: 455 amps DC• Crankingrating: 1250 amps DC for 10 seconds• Voltagerating: 48 volts DC maximum• Terminalstudsize: 2 x 10mm
Battery Switch Identification LabelsIn installations where multiple switches are used it will be necessary to label the switches for different applications. The following label sheets are available. Opaque white adhesive label with black lettering. Oval shape 27 x 20mm.
BLA Code
113547
BLA Code
113691
BLA Code
113690
BLA Code
113550
113549 Spare knob
Contour Battery Master SwitchThe 701 Contour Battery Master Switch is a simple on/off switch which offers a number of unique features. The contour lock system allows it to be a stand alone unit or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the on or off position, however can be removed by switching to an anti-theft position. Interchangeable labelling system on the control knob allows a full range of applications. Switches come standard with the battery symbol label. Alternative label sets 113690 and 113691 are available. Removable rear cover insulates the rear terminals against any short circuits and ensures the switch meets ABYC requirements. Removable side plates on 4 sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Screw holes 5mm roundhead. Ignition protected. Non-corrosive construction.
Specifications:• Continuousrating: 275 amps DC• Intermittentrating: 455 amps DC• Crankingrating: 1250 amps DC for 10 seconds• Voltagerating: 48 volts DC maximum• Terminalstudsize: 2 x 10mm
BLA Code
113548113549 Spare knob
yellow Parallel Battery Switch KnobFor applications where an emergency parallel switch needs to be highlighted. Suits BEP 701 Series switches. Ordered separately and replaces existing knob.
BLA Code
113590
Heavy Duty Four Position Battery SwitchThe 721 heavy duty selector switch provides four possible operation settings, Off, Battery 1, Both and Battery 2 giving the choice of charging a selected battery or isolating current draw to a single battery. The switch can be recess mounted in a 85mm hole or surface mounted. Screw holes 5mm roundhead. Removable rear cover insulates the rear terminals against short circuit and removable side plates provide access for heavy duty battery cables. Please note this system will not protect electronics from harmful engine starting spikes.
Specifications:• Continuousrating: 350 amps DC between common and B1 or B2
500 amps DC between common and B1 and B2• Intermittentrating: 500 amps DC• Crankingrating: 1500 amps DC for 10 seconds• Voltagerating: 48 volts DC maximum• Terminalstudsize: 3 x 10mm
Mini Four Position Battery SwitchThe 701-S is the smallest selector switch on the market. This battery switch offers a simple and economical way of separating two batteries. Four position rotating switch provides off, Battery 1, Both and Battery 2 alternatives. Removable rear cover insulates the rear terminals against any short circuits. Removable side plates on four sides provide access for heavy duty battery cables. Surface mount or recess mount in a 52mm hole. Mount holes 5mm roundhead. The 7015-PM is designed specifically for panel mounting with the option of full recess or shallow intrusion. This flush mounting version accepts 5mm countersunk screws. Please note this switch will not protect electronics from harmful engine starting spikes.
Specifications:• Continuousrating: 200 amps DC• Intermittentrating: 300 amps DC• Crankingrating: 1000 amps DC for 10 seconds• Voltagerating: 48 volts DC maximum• Terminalstudsize: 3 x 8mm
BLA Code
113556
BLA MountingCode Type
113553 Panel113557 Surface
Panel mount
Surface mount
Quality marine equipment
section
11
80
ELE
CT
RIC
AL
www.bla.com.au
section
11
81
ELE
CT
RIC
AL
Battery Distribution Cluster - Single Engine Two Battery Banks
Pre assembled module with solid links and application labels, based on the 701 Mini Battery Master Switch. Provides for isolation of start battery and house batteries independently with the ability to emergency parallel supply from both. Ignition protected. Available in horizontal or vertical configuration (designated in on position).
Battery Distribution Cluster - Two Engines Two Battery Banks
Pre assembled module with solid links and application labels with two 701 Mini Battery Master Switches and one 701-S Mini Battery Selector Switch. The Battery Master Switches isolate the port battery and the starboard battery independently. The Battery Selector Switch is used to switch the house load between the port battery and the starboard battery. It can also be used to parallel the batteries when in the both position.
BLA Configuration Base HeightCode mm mm
113552 Horizontal 207x69 69113554 Vertical 69x207 69
BLA Base HeightCode mm mm 113666 270x69 69
Battery Distribution Cluster with VSR - Single Engine Two Battery Banks
Pre-assembled module with solid links and application labels combining three 701 Mini Battery Master Switches with a 125amp Voltage Sensitive Relay. This system is an ideal replacement for an existing four position battery selector switch, easily connected to the existing wires, to provide a fully automatic battery management system. Provides for isolation of start and house batteries independently with the ability to emergency parallel supply from both. The VSR will automatically prioritise the charging of the start battery. When the engine is first started the relay is open and remains open until the start battery has reached a preset 13.7 volt. At the rated voltage, the relay closes providing charge to both batteries (start and house). When the voltage drops below 12.8 volt (when the engine is stopped), the VSR disengages, separating the batteries. This system eliminates the possibility of draining the start battery and protects electronics powered by the house battery from harmful engine starting spikes. Available in horizontal, vertical (designated in the on position) or square configuration.
BLA Configuration Base Height MountCode Holes mm mm mm
113681 Horizontal 276x69 69 5 r/h113685 Square 138x138 69 5 r/h113689 Vertical 69x276 69 5 r/h
113681
113685
BLA Base Height MountCode Holes mm mm mm 113651 138x69 69 5 r/h
Battery Switch Mount PlatesThese mount plates in matching grey finished aluminium enable simple recessed installation of the range of BEP battery switches and battery distribution clusters. Supplied with stainless steel mounting hardware.
Battery Management Panel - Type Four Single Engine Two Battery Banks
Pre-assembled module with black powder coated aluminium recessed face plate containing two 701 Mini Battery Master Switches, Bussmann heavy duty circuit breaker for anchor winch, two24hressentialpowersupplythermalcircuitbreakersanda100amp‘C’Seriescircuitbreaker for the DC main supply. One battery master switch isolates the start battery. The other battery switch parallels the start and house batteries for charging and load applications where required. There is also provisionforanadditional‘C’Seriescircuitbreaker for other high load applications such as davit winches, toilet treatment systems etc. Supplied with comprehensive circuit breaker label set.
BLA Description Dim. SuitsCode mm
113581 Single small 95x95 113550, 113557113587 Single large 170x170 113551, 113556. 113527113589 Triple large 110x379 113551 x 3, 113527 x 3
BLA O/all Intrusion Protrusion MountCode Size Screws mm mm mm mm
113669 239x160 55 35 3 r/h
Battery Distribution Cluster with VSR - Single Engine Two Battery Banks
Pre-wired module combining 701-S Mini Battery Selector Switch and a dual sensing Voltage Sensitive Relay. With the selector switch in position 1, it becomes the sensing battery for the VSR. When the engine is first started the relay is open and remains open until the selected battery reaches a preset 13.7 volt. The relay closes at the rated voltage providing charge to both batteries. When the selected battery voltage drops below 12.8 volt, the VSR disengages, separating the batteries and ensuring that battery 1 is not discharged by house loads. When the selector switch is in position 2, this becomes the sensing battery and the reciprocal occurs. When the selector switch is in the both position the VSR is inactive and the charge and load is distributed evenly between the batteries. With this system the loads are run off the same battery as the engine starting battery.
TWIN BATTERy
CHARGING MADE EASy
113589
Quality marine equipment
section
11
82
ELE
CT
RIC
AL
www.bla.com.au
section
11
83
ELE
CT
RIC
AL
Battery Distribution Cluster With VSR - Twin Outboard Three Battery Banks
This system is designed to provide automatic battery management for twin outboard installations using outboards without AUX outputs. It is a pre-assembled module with solid links and application labels. Provides independent isolation of port start, starboard start and house batteries with the ability to emergency parallel both starting batteries, combined with a 125 amp VSR connected to each engine. It will control the port engine to charge the port start battery first and then the house battery when the port start battery is fully charged. It will also control the starboard engine to charge the starboard start battery first and then charge the house battery when the starboard start battery is fully charged, giving a combined charge from both engines to the house battery until the voltage regulators of both engines control the charge. It will also allow the house battery to be charged if running on one engine.
Battery Distribution Cluster With VSR - Twin Inboard Three Battery Banks
This system is used in installations when it is not practical to have both engine alternators in parallel because of the types of regulators. It provides isolation of the port start, starboard start and house batteries independently with the ability to emergency parallel both starting batteries. A 125amp Voltage Sensitive Relay (VSR) is connected to the port engine. When the port engine is first started the relay is open and remains open until the port start battery reaches a preset 13.7 volt. At the rated voltage, the relay closes providing charge to both the port start battery and the house battery. When the port start battery voltage drops below 12.8V (when the engine is stopped), the VSR disengages, separating the batteries, ensuring the port start battery is not discharged by house loads. The starboard start battery is always isolated to start and be charged by the starboard engine unless the emergency parallel is on.
BLA Base Height MountCode Holes mm mm mm 113687 207x138 69 5 r/h
BLA Base Height MountCode Holes mm mm mm 113683 207x207 69 5 r/h
Battery Distribution Cluster With VSR - Triple Outboard Four Battery Banks
Designed to provide automatic battery management for triple outboard installations. It is a pre-assembled module providing independent isolation of the house battery and each start battery. It also has the ability to emergency parallel the start batteries. A 100amp VSR is connected to each engine providing a combined charge from all three outboards into the house battery.
TWIN BATTERy
CHARGING MADE EASy
TWIN BATTERy
CHARGING MADE EASyBLA Base Height MountCode Holes mm mm mm 113682 207x138 69 5 r/h
Pre-assembled module with white powder coated aluminium recessed face plate containing four 701 mini battery master switches, Bussmannheavydutycircuitbreakerforanchorwinch,four24hressentialpowersupply‘B’Seriescircuitbreakersanda100amp‘C’SeriescircuitbreakerfortheDCmainsupply.Startandhousebatteriescanbeisolatedindependentlywiththeabilitytoemergency parallel both batteries. A spare battery master switch is supplied for radio, genset, anchor winch etc. Space is available tofitanadditionaltwobatteryswitchesandasecond‘C’Seriescircuitbreakerforotherhighloadapplicationssuchasdavitwinches, toilet treatment systems etc. Supplied with a comprehensive circuit breaker label set.
Battery Management Panel - Type One Single Engine Two Battery Banks
Battery Management Panel - Type Two Twin Engine Three Battery Banks
Pre-assembled module with white powder coated aluminium recessed face plate containing five 701 Mini Battery Master Switches, Bussmann heavy duty circuit breaker for anchor winch, five 24hressentialpowersupply‘B’Seriescircuitbreakersanda100amp‘C’Seriescircuitbreakerfor the DC main supply. Port start, starboard start and house batteries can be isolated independently with the ability to emergency parallel batteries in pairs or altogether. Space is available to fit an additional two battery switches for radio, genset, anchor winch, bow thruster type applications. It is also possible tofitanadditionaltwo‘C’Seriescircuitbreakers for high load applications and up to fivemoreessentialcircuits‘B’Seriescircuitbreakers.
Battery Management Panel - Type Three Twin Engine Three Battery Banks
Pre-assembled module with white powder coated aluminium recessed face plate containing 720 heavy duty Battery Master Switches to cater for higher start up current of larger diesels, two 701 Mini Battery Master Switches, Bussmann heavy duty circuit breaker for anchor winch, five 24hr essential power supply ‘B’Seriescircuitbreakersanda100amp‘C’SeriescircuitbreakerfortheDCmainsupply. Space is available to fit additional battery switches and circuit breakers as above. Supplied with a comprehensive circuit breaker label set.
BLA O/all Intrusion Protrusion MountCode Size Screws mm mm mm mm
113677 351x260 55 35 4 r/h
BLA O/all Intrusion Protrusion MountCode Size Screws mm mm mm mm
113679 463x380 55 35 4 r/h
BLA O/all Intrusion Protrusion MountCode Size Screws mm mm mm mm
113678 463x281 55 35 4 r/h
Quality marine equipment
section
11
84
ELE
CT
RIC
AL
www.bla.com.au
section
11
85
ELE
CT
RIC
AL
Contour Connect Battery Distribution Cluster with VSR – Single Engine Two Battery Banks Pre-wired, flush mount module that combines the 701-S battery selector switch and a 100 amp dual sensing Voltage Sensitive Relay in an aesthetically pleasing, modular housing. Operation is identical to 113651 on page 82. Panel fastening is concealed by interchangeable clip-on strips (light grey is supplied as standard, refer page 87 for other options) and clip-on cover at rear ensures ABYC compliance of the installation. Supplied with one interlink joiner enabling simplified system expansion.
Contour Connect Battery Distribution Cluster with VSR – Twin Outboard Three Battery Banks
Pre-wired, flush mount module that combines four 701 battery switches with two 100 amp dual sensing Voltage Sensitive Relays. Operation is identical to 113687 on page 83. Panel fastening is concealed by interchangeable clip-on strips (light grey is supplied as standard, refer page 87 for other options) and clip-on cover at rear ensures ABYC compliance of the installation. Supplied with one interlink joiner enabling simplified system expansion and extra cables to allow for different mounting configurations.
BLA Width Height IntrusionCode mm mm mm 113010 166 106 55
BLA Width Height IntrusionCode mm mm mm 113018 166 318 55
Contour Connect Battery Distribution Cluster with VSR – Single Engine Two Battery Banks
Flush mount module that combines three 701 battery switches with a 100 amp dual sensing Voltage Sensitive Relay. Operation is identical to 113681 on page 81. Supplied loosely assembled with links and joiners that allow it to be installed in either the vertical or horizontal plane as depicted below. Panel fastening is concealed by interchangeable clip-on strips (light grey is supplied as standard, refer page 87 for other options) and clip-on cover at rear ensures ABYC compliance of the installation. Supplied with one interlink joiner enabling simplified system expansion.
BLA Code 113014
Horizontal: 332mm W x 106mm H x 55mm Intrusion
Vertical: 166mm W x 212mm H x 55mm Intrusion
Contour Connect Battery Distribution Cluster – Single Engine Two Battery Banks Pre-assembled, flush mount module with three 701 battery switches connected by solid links in an aesthetically pleasing, modular housing. Operation is identical to 113552 on page 81. Panel fastening is concealed by interchangeable clip-on strips (light grey is supplied as standard, refer page 87 for other options) and clip-on cover at rear ensures ABYC compliance of the installation. Supplied with one interlink joiner enabling simplified system expansion.
Contour Connect Battery/Switch PanelsCombination, pre-wired flush mount panels to compliment the range of Contour Connect Battery Distribution Clusters. Select from the table below the panel that best suits your installation. Panel fastening is concealed by interchangeable clip-on strips (light grey is supplied as standard, refer page 87 for other options) and clip-on cover at rear ensures ABYC compliance of the installation. Supplied with one interlink joiner enabling simplified system expansion. Dimensions: 166mm W x 106mm H x 55mm Intrusion.
BLA Width Height IntrusionCode mm mm mm 113022 233 106 55
BLA DescriptionCode 113026 1 x 50 amp CB, 2 x 15 amp & 1 x 10 amp thermal CB's and 1 x 125 amp HD CB113030 1 x 701 battery switch, 2 x 10 amp and 2 x 15 amp toggle CB's113034 1 x 701-S battery selector, 2 x 10 amp and 2 x 15 amp toggle CB's113036 2 x 10 amp, 2 x 15 amp toggle CB's113037 2 x 10 amp and 2 x 15 amp thermal CB's113038 2 x 5 amp, 2 x 10 amp, 3 x 15 amp and 1 x 20 amp toggle CB's113042 2 x 10 amp, 2 x 15 amp toggle CB's and 2 x 10 amp, 2 x 15 amp thermal CB's
113026113030
113038
113042113037 113036
113034
Quality marine equipment
section
11
86
ELE
CT
RIC
AL
www.bla.com.au
section
11
87
ELE
CT
RIC
AL
Contour Connect Breaker MountRear mount moulding for Contour Connect panels to suit the Bussmann® heavy duty circuit breakers on page 91. Supplied with fastenings for both the circuit breaker and attachment to panel.
BLA Code 113064
Contour Connect BlankDesigned to be used on Contour Connect panels where one of the larger holes is not being utilised. Allows for system expansion at a later stage.
BLA Code 113068
Contour Connect Kitset PanelsA range of blank Contour Connect housings enabling the user to create a custom panel or modify an existing installation. All mouldings are supplied with mounting hardware to fit compatible components and, where relevant, a cc-joiner for attachment to other modules. 113058 has a blank face for ancillary equipment associated with battery management and features mounting posts on the rear to accept insulated studs, heavy duty distribution buss bars and heavy duty fuse holders.
BLA Code 113050113052113054113056113058
113058 Rear - Power studs not included
113050 113052113054 113056
BLA Code 113697
BLA Code 113691
BLA Code 113690
Contour Connect JoinersBlack plastic interlink joiners designed to link panels together. The corner cross joiner provides extra rigidity when four corners are butted together.
BLA DescriptionCode 113076 Interlink joiner113078 Interlink corner joiner
113078113076
Contour Connect Back CoverBlack plastic cover designed to clip onto the rear of Contour Connect panels (except 113056) ensuring all exposed terminals are covered.
BLA Code 113072
Contour Connect LabelsAdhesive labels to suit the Contour Connect range of battery switches and switch panels.CIDOHTAC
NOITCETORP
TIVAD
EGLIBTFAPMUP
SLORTNOCENIGNE
TROP
SCINORTCELE
ENIGNESLORTNOC
MOORENIGNESTHGIL
YRETTABREGRAHC
EGLIBDWFPMUP
EGLIBDIMPMUP
EGLIBTROPPMUP
EGLIBDBTSPMUP
PMUPEGLIBMOORENIGNE
OCROTCETED
NIAMCD
CDSTELTUO
SLORTNOCENIGNE
DBTS
ERIFMETSYS
REFSNARTLEUF
PMUPYRETTAB
TROP
REGRAHC
NASARTCEL OERETS
OERETSYROMEM
TELIOT
YRETTABDBTS
REGRAHC
ERAPS
YRETTABESUOH
REGRAHC
RETAWHGIH
GNIDLOHKNAT
RETAWHSERFPMUP
EGDIRF STHGIL
ERAPS
PMUPPMUS
SBATMIRT
HCNIW
DC MAINS
DECKWINCH
PUMPS
SALOONMAINS
TOILET
FLYBRIDGEMAINS
ANCHORWINCH
DAVIT
DOCKINGWINCH
HELMMAIN
LECTRASAN
WINCH
CIDOHTACNOITCETORP
TIVAD
EGLIBTFAPMUP
SLORTNOCENIGNE
TROP
SCINORTCELE
ENIGNESLORTNOC
MOORENIGNESTHGIL
YRETTABREGRAHC
EGLIBDWFPMUP
EGLIBDIMPMUP
EGLIBTROPPMUP
EGLIBDBTSPMUP
PMUPEGLIBMOORENIGNE
OCROTCETED
NIAMCD
CDSTELTUO
SLORTNOCENIGNE
DBTS
ERIFMETSYS
REFSNARTLEUF
PMUPYRETTAB
TROP
REGRAHC
NASARTCEL OERETS
OERETSYROMEM
TELIOT
YRETTABDBTS
REGRAHC
ERAPS
YRETTABESUOH
REGRAHC
RETAWHGIH
GNIDLOHKNAT
RETAWHSERFPMUP
EGDIRF STHGIL
ERAPS
PMUPPMUS
SBATMIRT
HCNIW
DC MAINS
DECKWINCH
PUMPS
SALOONMAINS
TOILET
FLYBRIDGEMAINS
ANCHORWINCH
DAVIT
DOCKINGWINCH
HELMMAIN
LECTRASAN
WINCH
CIDOHTACNOITCETORP
TIVAD
EGLIBTFAPMUP
SLORTNOCENIGNE
TROP
SCINORTCELE
ENIGNESLORTNOC
MOORENIGNESTHGIL
YRETTABREGRAHC
EGLIBDWFPMUP
EGLIBDIMPMUP
EGLIBTROPPMUP
EGLIBDBTSPMUP
PMUPEGLIBMOORENIGNE
OCROTCETED
NIAMCD
CDSTELTUO
SLORTNOCENIGNE
DBTS
ERIFMETSYS
REFSNARTLEUF
PMUPYRETTAB
TROP
REGRAHC
NASARTCEL OERETS
OERETSYROMEM
TELIOT
YRETTABDBTS
REGRAHC
ERAPS
YRETTABESUOH
REGRAHC
RETAWHGIH
GNIDLOHKNAT
RETAWHSERFPMUP
EGDIRF STHGIL
ERAPS
PMUPPMUS
SBATMIRT
HCNIW
DC MAINS
DECKWINCH
PUMPS
SALOONMAINS
TOILET
FLYBRIDGEMAINS
ANCHORWINCH
DAVIT
DOCKINGWINCH
HELMMAIN
LECTRASAN
WINCH
BLA Code 113696
Contour Connect Wave StripContour Connect panels are supplied with one pair of light grey wave strips. Change the appearance of the panel by fitting a charcoal coloured wave strip. Sold as a pair.
BLA Code 113082
Buss BarsTin plated brass buss bars with insulated mounting bases. Mounting holes are recessed to avoid accidental shorts. Polarity colour coded covers are available to meet ABYC standards (refer below)
Specifications:
Outputscrews: 4mm
Inputstuds: 6mm
Currentrating:
- 100A on 6/12 way
- 150A on 24 way
Twin Buss BarsTin plated brass buss bars with twin rows of terminals and insulated mounting bases to enable both positive and negative DC, or earth and neutral busses on one block. Alternatively the rows may be bridged to increase capacity. Twin buss bars accept the same colour coded covers on each row as the single buss bars.
Specifications:
Outputscrews: 4mm
Inputstuds: 6mm
Currentrating: 100amps DC
Buss Bar CoversMoulded in flame resistant plastic and colour coded for polarity. Simple push on fit. Meet ABYC standards.
Heavy Duty Buss BarTin plated brass buss bar with insulated mounting base and four heavy duty studs. Polarity colour coded covers 113442 and 113443 are also available.
Specifications:
Studs: 6mm (1/4”)
Currentrating: 150amps DC
Voltagerating: 48V DC max
Contour Buss Bar CoverContour style, moulded grey plastic buss bar cover to suit 6 way or 2 x 6 way buss bars. Designed to match all other BEP Contour power distribution products with modular sizing and lock mouldings which facilitates easy grouping. Meets ABYC standards for exposed terminals. 138 (l) x 69 (w) x 50 (h) mm.
Contour Buss Bar2 x 6 way tin plated brass buss bars with insulated base in Contour style housing. Supplied complete with link between the terminal rows. Link may be removed to enable both positive and negative DC or earth and neutral AC buss bars to combined in one housing, separated by the insulated partition supplied.
Specifications:
Outputscrews: 4mm
Inputstuds: 6mm
Currentrating:
100amps DC
BLA Take Length Width HeightCode Offs mm mm mm
113504 6 117 15 32113506 12 177 15 32113509 24 177 35 32
BLA Take Length Width HeightCode Offs mm mm mm
113505 2x6 100 42 32113507 2x12 160 42 32
BLA Colour SuitsCode
113442 Red 113503, 113504, 113505113443 Black 113503, 113504, 113505113444 Red 113506, 113507113445 Black 113506, 113507113446 Red 113509113447 Black 113509
BLA SuitsCode
113516 113503, 113504, 113505
BLA Take Length Width HeightCode Offs mm mm mm
113508 12 138 69 50
BLA Take Length Width HeightCode Offs mm mm mm
113503 4 120 25 32
113443
113504
113506
113509
113505
113507
113444
113447
Quality marine equipment
section
11
88
ELE
CT
RIC
AL
www.bla.com.au
section
11
89
ELE
CT
RIC
AL
Terminal BlocksTerminal block with phenolic resin insulated base and nickel plated brass contact strips. Each pair of terminals are isolated from the next.
Specifications:
Terminalscrews: 4mm
Currentrating: 30 amps
Insulated Power StudHigh temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards.
Insulated Dual Power StudsHigh temperature moulded plastic base with tinned copper studs in 8-10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and 8mm stud for the negative is also available. Push fit covers, colour coded for polarity are also available.
Insulated Power Stud CoversDesigned to conform to ABYC standards on exposed connections. Secure push fit over the threaded stud covering exposed lugs. Available in versions to suit single and dual insulated studs, colour coded for polarity.
Contour Power Stud CoverContour style, moulded grey plastic cover to suit single or dual insulated power studs. Designed to match all other BEP Contour power distribution products with modular sizing and lock mouldings to facilitate easy grouping. Meet ABYC standards for exposed terminals.
Contour Ammeter Shunt EnclosureContour style, moulded grey plastic enclosure with removable side covers. Suits BEP ammeter shunts which are sold separately (refer page 72). Meets ABYC standards by covering all exposed terminals. 113650 accepts one mini shunt as used on analogue meters. 113648 accepts two mini shunts or one maxi shunt as used on digital meters.
BLA Connections Length Width HeightCode mm mm mm
113511 6 111 32 16113513 10 169 32 16
BLA Stud Base Base HeightCode Size Colour Size mm mm mm
113514 6 Black 44x18 36113515 6 Red 44x18 36113517 6 Black 44x18 36113518 10 Red 44x18 36113519 10 Black 44x18 36
BLA Stud Base HeightCode Size Size mm mm mm
113520 6 48x43 38113521 10/8 48x43 38113522 10 48x43 38
BLA Suits ColourCode
113523 Single stud Red113525 Single stud Black113526 Dual stud Red113529 Dual stud Black
BLA Base Height MountCode Size Screws mm mm mm 113648 138x69 50 5 r/h
113517
113518
113519
113520
113521
113522
BLA Base HeightCode Size mm mm 113524 69x69 50
113511
113513
113526 113523
113529
Terminal Links - Solid
Solid links are designed for space saving interconnections of terminals when contour power distribution modules are linked together. Six standard solid links are available.
42.5mm
42.5mm
Contour Distribution StudThe Contour Distribution Stud allows termination of heavy duty cables for one or more connections. Removable side plates allow for connections from all sides. Designed to match all other Contour power distribution products with modular sizing and lock mouldings to facilitate easy grouping. Meets ABYC standards for exposed terminals. A secondary buss may be fitted to the distribution stud to provide connections for smaller wires without cluttering the main stud (refer 113562 below).
Contour Heavy Duty Distribution BussThe Contour Distribution Buss allows multiple terminations of heavy duty negative or positive connections. Removable side plates allow for connections from all sides. Designed to match all other Contour power distribution products with modular sizing and lock mouldings to allow easy grouping. Meets ABYC standards for exposed terminals. The 113567 is commonly used on heavy duty starter circuits. The taller cover provides for more bulky cables and lugs.
Distribution Stud, Secondary BussFitted to a distribution stud, it allows for small wire connections without cluttering main stud. Tinned brass construction.
Diagram depicts typical master switch setup using solid terminal links.
BLA Hole Amp StudCode Centres mm mm
113656 - - 10113657 107 - 10113658 70 - 10113660 42.5 275 10113661 54.5 275 10113662 64.5 275 10113663 68.5 275 10113664 62.0 550 12113665 102 550 12
Terminal Links - Flexible
Used to link contour power distribution modules in some installations where the solid links do not suit or will not reach the correct terminal.
BLA Wire Centres AmpCode mm2 mm
113090 25 150 275113092 25 300 275113093 25 250 275113675 25 200 275113676 25 300 275115110 25 500 275
BLA Stud Base Height MountCode Dia. Screws mm mm mm mm
113558 10 69x69 50 5 r/h113559 2x10 69x69 50 5 r/h113560 4x10 138x69 50 5 r/h
BLA Length Width Main TakeCode Stud Offs mm mm mm mm
113562 75 12 10 4
BLA Amp Stud Base Height MountCode Dia. Screws mm mm mm mm
113566 300 10x4 138x69 50 5 r/h113567 500 10x3 138x69 75 5 r/h
64.5mm
64.5mm68.5mm
64.5mm
113660
113090 113675
113656
113566
113567
113559
113558
113560
Quality marine equipment
section
11
90
ELE
CT
RIC
AL
www.bla.com.au
section
11
91
ELE
CT
RIC
AL
Circuit Breaker SwitchesAirpax® magnetic circuit breakers are current sensing devices employing a time proven hydraulic magnetic design. They are temperature stable and the hydraulic-magnetic sensing mechanism reacts only to changes of current. There is no warm up or cool down period to slow response. VDE approved and UL recognised.
BLA AmpsCode Single Pole Double Pole
113479 2.5113480 113528 5113482 113530 10113484 113532 15113485 113536 25113486 113534 20113487 113538 30113488 113540 40113490 113542 50
Circuit Breaker SwitchesAirpax® magnetic circuit breakers are current sensing devices employing a time proven hydraulic magnetic design. They are temperature stable and the hydraulic-magnetic sensing mechanism reacts only to changes of current. There is no warm up or cool down period to slow response. VDE approved and UL recognised.
Miniature Circuit BreakersFor installations in Australia and New Zealand to comply with AS/NZ3004, an approved double pole mains circuit breaker must be mounted upstream of the BEP control panel in the form of an RCD or MCB.An MCB (miniature circuit breaker) is an automatic electric switch that is designed to protect damage to an electrical circuit caused by an overload or short circuit. Unlike a fuse that operates only once and then needs to be replaced, a circuit breaker can be reset to resume normal operation after the fault has been rectified.
BLA AmpsCode
113474 50113475 75113476 100
113474BLA AmpsCode
113596 16113597 32113599 Weatherproof (IP65) enclosure
113596
113599
Heavy Duty Circuit BreakersSingle pole thermal type switchable reset circuit breakers. Typically used in auxiliary and accessory circuits. Sealed for engine compartment and bilge area applications. Visual indicator of tripped condition.
Specification:• 30VDC, 3000 amp
interrupt capacity• -32ºC to 82ºC operating
temperature• Complies with
SAEJ1625
Surface mount
BLA Amp MountCode
114049 50 Surface114050 50 Panel114052 80 Panel114053 100 Surface114054 100 Panel114056 135 Panel114057 150 Surface114058 150 Panel
Panel mount
Allows switchable protection for heavy duty circuits like anchor windlass or davit winches. Utilises Bussmann® heavy duty thermal circuit breakers. Designed to match all other Contour power distribution products with modular sizing and lock mouldings to facilitate easy grouping. LED to indicate circuit on. Label sheet 113692 ordered separately. Available in sizes from 80-150amps.
Contour Heavy Duty Circuit Breakers
Contour Circuit Breaker ModuleContour housing with three magnetic hydraulic switchable circuit breakers. Designed to separate load from the main DC panel, thereby avoiding unnecessary voltage spikes. Matches all other Contour power distribution products with modular sizing and lock mouldings to facilitate easy grouping. Supplied standard with 1 x 50 amp and 2 x 25 amp circuit breakers. Modules with any combination of circuit breaker including 10, 15, 20, 25, 30, 40 and 50 amp are available on special order.
BLA Amp Base Height MountCode Screws mm mm mm
113634 80 138x69 75 5 r/h113635 100 138x69 75 5 r/h113636 135 138x69 75 5 r/h113641 150 138x69 75 5 r/h
BLA Base Height MountCode Screws mm mm mm
113640 138x69 75 5 r/h
Carling® CLB Circuit BreakersSingle pole, push to reset thermal type circuit breakers to suit the Contour Connect switch panels. UL and CE approved. Comes with 4mm spacer collar and rubber boot.
BLA DescriptionCode
113600 7 Amp113601 5 Amp113602 10 Amp113603 15 Amp113604 20 Amp113605 30 Amp113606 40 Amp
113607 CLB Circuit Breaker
113601
113607
113635
Airpax® Reverse Polarity D-PoleCircuit BreakerThese Airpax® magnetic circuit breakers use the time proven hydraulic magnetic design, but with the addition of a Transzorb sensor. This gives the circuit breaker a higher level of protection against large voltage spikes, by absorbing much more of the transient energy internally, then the standard circuit breaker. This makes it ideal for your high end electronic devices.
BLA DescriptionCode
113563 CB 15A113565 CB 30A
113563
Quality marine equipment
section
11
92
ELE
CT
RIC
AL
www.bla.com.au
section
11
93
ELE
CT
RIC
AL
Contour Essential Circuits ModuleThese modules offer 24 hour protection to essential circuits so that they are not switched off by the main battery switch allowing protected power to supply bilge pumps, security systems and electronic memory circuits. They incorporate thermal type circuit breakers with push to reset function to ensure that essential circuits cannot be switched off inadvertently. Designed to match all other Contour power distribution products with modular sizing and lock mouldings to facilitate easy grouping. Label sheet 113692 ordered separately.
Residual Current Device PanelsRecess mount panels housing a Residual Current Device (RCD). Produced to compliment the BEP Contour Circuit Breaker Panel range but due to the difference in style of the RCD's the panels need to be mounted separately from the main AC panel. The RCD is a circuit breaker that disconnects the circuit on detection of current leakage (such as current leaking to the earth wire).
Typical BEP Distribution System• 113504 Buss bar• 113550 Contour battery switch• 113558 Distribution stud• 113566 Distribution buss• 113636 Circuit breaker heavy duty• 113638 24 hour service circuit breaker module• 113640 Circuit breaker module• 113660 Terminal links• 113646 Voltage sensitive relay• 113648 Ammeter shunt enclosure• 113690 Labels for 701 switch
BLA Circuits Base Height MountCode Screws no. x amps mm mm
113637 2x10 69x69 70 5 r/h113638 1x5, 3x15 138x69 70 5 r/h
BLA Amp Face Intrusion Cut OutCode Rating Size Size mm mm mm
113642 16 115x127 65 95x107113643 32 115x127 65 95x107113644 16 115x127 65 95x107113645 16/32 115x127 65 95x107
Residual Current DeviceFor installations in Australia and New Zealand to comply with AS/NZ3004, an approved double pole mains circuit breaker must be mounted upstream of the BEP control panel in the form of an RCD or MCB. A residual current device is designed to disconnect a circuit whenever it detects an imbalance between the energized conductor and the return neutral conductor. Such an imbalance can be caused by current leakage through the body of a person who is grounded and touching an energized part of the circuit. A lethal shock can result from these conditions. RCDs are designed to prevent electrocution by detecting the leakage current, which can be far smaller (typically 5-30 milliamperes) than the currents needed to operate conventional circuit breakers or fuses. RCDs are intended to operate within 25-40 milliseconds, before electric shock can drive the heart into ventricular fibrillation, the most common cause of death through electric shock.
BLA Amp RatingCode
113593 16113594 32113599 Weatherproof (IP65) enclosure
113637
113638
113594
Switch Panels - Bakelite
Economical switch panels. Bakelite face panel pre-wired with common supply to fuse. Screw top fuse holders and chromed brass toggle switches. 12/24 volt. Supplied with 15 amp fuses. Available in three and six gang configurations. Nameplates included.
Switch Panel - Black Alloy
Six gang vertical switch panel. Black finished aluminium panel with white graphics. Pre-wired with common supply to fuses and switch illumination. Red illuminated rocker switches. Quick inspection fuse holders. Labelled - anchor light, running lights, cabin light, bilge pump, aux one, aux two (alternative nameplates supplied). Supplied with 5 amp fuses. Suitable for 12 volt applications.
Switch Panel - Black Alloy
Six gang horizontal switch panel. Black finished aluminium panel with white graphics. Pre-wired with common supply to fuses and switch illumination. Red illuminated rocker switches. Quick inspection fuse holders. Labelled - anchor light, running lights, cabin light, bilge pump, aux one, aux two (alternative nameplates supplied). Supplied with 5 amp fuses. Suitable for 12 volt applications.
Switch Panel - Black Alloy
Black finished aluminium, three gang switch panel with battery test meter and cigarette lighter. Rocker switches are illuminated red and are connected to panel mounted fuse holders. The battery test meter can independently test two different batteries. Cigarette lighter is connected to panel mount fuse holder and may be used as a 12 volt power outlet. Common power supply to fuses. Common negative to switch light. Supplied with three 5 amp and one 10 amp fuses.
Switch Panels - Silver Alloy
Vertical switch panels. Silver aluminium panel with black graphics. Red illuminated rocker switches. Quick inspection fuse holders pre-wired with negative buss. Supplied with assorted labels. Suitable for 12 volt applications, 10 amp maximum. Supplied with 5 amp fuses.
BLA Gang Height Width Cut Intrusion MountCode Out Screws mm mm mm mm mm
114000 3 93 115 70x85 35 4 c/s114002 6 165 115 145x85 35 4 c/s
BLA Gang Height Width Cut Intrusion MountCode Out Screws mm mm mm mm mm
114012 6 116 167 60x125 45 4 r/h
BLA Gang Height Width Cut Intrusion MountCode Out Screws mm mm mm mm mm
114014 3 97 116 63x60 50 4 r/h114016 4 127 116 63x85 50 4 r/h114018 6 167 116 63x125 50 4 r/h
BLA Height Width Cut Intrusion MountCode Out Holes mm mm mm mm mm
114250 167 116 82x120 80 4 r/h
BLA Gang Height Width Cut Intrusion MountCode Out Screws mm mm mm mm mm
114010 6 167 116 125x60 45 4 r/h
114016
114018
Quality marine equipment
section
11
94
ELE
CT
RIC
AL
www.bla.com.au
section
11
95
ELE
CT
RIC
AL
Electrical GaugesFeatures:• Highest accuracy (better than automotive, more consistent than
competitors) in temperature ranges from -40ºC to +85ºC• Precision vector movement in all electrical units is silicone
dampened to minimise pointer bounce and magnetically shielded so compasses and other gauges are not affected
• Premium materials resist corrosion, UV and chemicals• Glass lenses for clarity and scratch resistance• Reverse polarity and over voltage protection• Easy-to-install• Automotive type wedge base lighting used where possible
for easy bulb replacement• Suitable for 24 volt applications with addition of drop resistor
and 24 volt bulb
The Vector Movement
The heart of all Veethree electrical instruments is the vector air-core movement. This simple, durable movement was pioneered by Veethree for marine use and is featured in every electrical instrument.
The Vector movement utilises a permanent magnet that is rotated magnetically in an electrical field. All coil windings and attachments are designed to withstand extremes in vibration, temperature, humidity, salt spray, etc. Electrical studs are tin plated to aid in solderability and to minimise corrosion in the marine environment.
All coils are placed in an annealed metal bobbin can to prevent the gauge from affecting compasses and other electronic equipment. At the same time, the bobbin can protects the gauges from other negative magnetic effects often found in a wiring harness.
VEEThrEE VECTOr MOVEMEnT
TAChOMETEr APPLiCATiOn ChArTSuitable for use with engines listed below. 4-cycle gas automotive, marine inboard, & I/O engines: with standard or factory electronic ignition, except early Mercruisers with Thunderbolt I ignition. Outboard engines (alternator equipped models only). Not compatible with older Chrysler and Force outboards with 20 pole alternators.
Make/Model Alt. Switch Poles Position ChrYSLEr®
35,70HP & up (1968-1983) 12 6P EVinruDE®/JOhnSOn®
Less than 70HP 2 cylinder, 2 stroke 10 5PAll other models including 'C' drive 12 6PEngine with warning light tacho require similar replacements FOrCE®
35HP (1986-date), 40HP (1993 to date) 12 6P 50HP through early 1987 (A, B models) 8 4P50HP1992revision‘B’&newer,70HP1991todate 12 6P70HP 1991 to date 12 6P90-120HP1991revision‘H’&newer 12 6P150HP1991revision‘B’&newer 12 6PL-drive,90-120HP1991revision‘B’todate 12 6PL-drive, 145HP 1991 to date 12 6PhOnDA®
35, 40**, 45 & 50HP** with alternator 6 6PAll other models with alternators 4 2PMErCurY®*/MArinEr®*2strokemodels:Mariner 18, 25, 48, 60HP (through 1983) 4 2P 8, 9.9, 15HP 6 3P35, 40HP 2 cylinder Australian series II 8070639 & up 8 4P4strokemodels:2 cylinder, 2 stroke electric start models 40HP & less 4 2P All other 2 stroke models with alternators 12 6P8, 9.9HP 6 3PAll other 4 stroke models 12 6PSuZuki®
2strokemodels:25, 30HP (1993 to date) 6 3P All under 55HP, 50-60HP Cabrea models 4 2Pexcept those noted above 60 & 65HP (1984 & older) 4 2P75HP & up 1985 to date 12 6PAll 4 stroke models 12 6P TOhATSu®
2strokemodels:All 2 cylinder models with alternator 4 2PAll 3 cylinder models with alternator 6 3P4strokemodels:All 4 stroke models except tiller model 12 6PTiller steered 40HP engine with warning light tacho similar replacementYAMAhA®
2strokemodels:9.9 & 15HP 4 2P25 to 70HP 6 3P90 to 250HP 12 6P4strokemodels:F/T9.9, F15HP 6 3PF/T25 to F/T225HP 12 6P
Lamp socket
Calibration adjust screw
Bezel
Coil Wire
resistor
returnMagnet 1
PermanentMagnet
upperBobbin
LowerBobbin
Pointer Shaft
Lens
Dial
housing
LightPipe
retainer
PointerAssembly
BobbinAssembly
Mounting stud
To system ground (-)
Positive (+)
Panel light switch
Selector switch
8C
4P
5P
6P
3P
6C2P 4C
(DETAIL)
rear of ignition switch
rear view of Veethree tachometer
Veethree Tachometer Selection Guide
Tachometers listed in this catalogue designated as being suitable for inboards and outboards feature TeleflexMarine's pulse selection switch. This feature enables the tachometers to be connected to standard ignition 4 stroke engines with 4, 6 or 8 cylinders, as well as outboard engines with 4, 6, 10 and 12 pole alternators. 20 pole outboards require a special tacho.
** May require Honda module 06383-ZV 5305. Guide only detailed fitting instructions supplied with Tacho.
Studs
returnMagnet 1
AnnealedBobbin Can
Gasket
Quality marine equipment
section
11
96
ELE
CT
RIC
AL
GPS SpeedometerVeethree Instruments are proud to announce the release of their GPS speedometer to the market. This instrument provides accurate speed over ground readings and heading information all in one attractive package. Available in various speed ranges to meet your application. The GPS speedo is offered in a number of popular styles to match the colors in your boat. The GPS speedo can be connected to an existing NMEA 0183 receiver if you have one already installed or you can purchase separately the custom designed GPS receiver/antenna. This product is ideal for all speed applications and is particularly useful for slower speed craft and higher speed craft where traditional speed sensors like pitot tubes and paddle-wheels do not perform well. An added advantage is there is nothing in the water to corrode or break.
BLA DescriptionCode
112109 Arctic White 0-35 mph112110 Arctic White 0-60 mph112236 Premier Pro Black 0-35 mph112238 Premier Pro Black 0-60 mph112290 Amega Black 0-35 mph112292 Amega Black 0-60 mph112344 LIDO Pro White 0-35 mph112346 LIDO Pro White 0-60 mph
112478 GPS Receiver 1.2m cable112480 GPS Receiver 7.6m cable
112480
112344 112110
112238 112292
www.bla.com.au
section
11
97
ELE
CT
RIC
AL
Black Amega Domed InstrumentsFeatures:• Very low profile black bezel follows the curve of the lens to eliminate any water 'trapping' • Red and white graphics on a black dial background• Through dial and perimeter lighting is provided for night visibility• Domed convex glass is scratch resistant• Pointers are white with a black hub• Shielded to prevent magnetic interference• Silicone dampened• Suitable for 24 volt application with the addition of a drop resistor and 24 volt bulb
* Sender style refer page 101
Dimensions a b c d mm mm mm mm75mm Tacho 96 86 70 1375mm Speedometer 96 86 82 1350mm Electrical 61 53 63 11
BLA Description Face Dia. *SenderCode mm Style
Tachometers: 112278 Tacho 7000 RPM inboard & outboard 75 Coil & O/B alt112282 Tacho 4000 RPM diesel alternator 75 Motor alternator N.B. Refer to page 95 for tachometer application guide
Speedometer:112284 Speedo kit 35 MPH 75 G included112286 Speedo kit 50 MPH 75 G included112288 Speedo kit 65 MPH 75 G included
Water:112294 Water temperature 120ºF - 240ºF 50 D112296 Water Pressure Kit 0 - 40 psi 50
Oil pressure:112298 Oil pressure 0 - 80 PSI 50 C112300 Oil pressure 0 - 100 PSI 50 C Hourmeter:112306 Hourmeter, 10,000 Hrs 50 Not required
Voltmeter:112314 Voltmeter, 8 - 18 volt 50 Not required
Ammeter:112318 Ammeter 60 - 0 - 60 50 Not required
Fuel:112322 Fuel 50 F
Trim:112326 Evinrude®/Johnson® outboards 50 Engine manufacturer112328 Mercury®/Mariner®, Cobra®, Volvo® DP & SX, Yamaha® O/B 2001 on 50 Engine manufacturer
a
c
b
d
112278
112284
112322
112298
Quality marine equipment
Artic Gauges Veethree introduces the new range of Arctic instruments. Stylish white bezel design, black on white graphics, accurate and reliable, these tough instruments look good on a wide range of boats.
Features:• Arctic instruments are available for most outboards, stern drives and petrol
powered inboards• Domed glass design sheds water and resists scratching for long lasting
appeal• Enhanced illumination featuring through-dial and perimeter lighting for
excellent readability at night• Imperial and metric scales with ISO symbols where appropriate• Easy to read flame tipped pointer• Suitable for 24 volt application with the addition of a drop resistor and
24 volt bulb• Replaces former Teleflex White Domed range
BLA Description Face Dia. *SenderCode mm Style
Tachometers: 112096 Tacho 7000 RPM inboard & outboard 75 Coil and O/board alt112098 Tacho 4000 RPM diesel alternator 75 Motor Alternator N.B. Refer to page 95 for tachometer application guide
Speedometer:112104 Speedo kit 35 MPH 75 G included112106 Speedo kit 65 MPH 75 G included112108 Speedo kit 80 MPH 75 G included
Water temperature gauge:112112 Water temperature 120ºF - 240ºF 50 D112116 Water pressure gauge kit 0 - 40 psi 50 WP Included
Oil pressure:112120 Oil pressure 0 - 80 PSI 50 C112122 Oil pressure 0 - 100 PSI 50 C Hourmeter:112126 Hourmeter, 10,000 Hrs 50 Not required
Voltmeter:112130 Voltmeter, 8 - 18 volt 50 Not required112134 Ammeter 60 - 0 - 60 50 Not required
Fuel:112138 Fuel 50 F
Trim:112142 Evinrude®/Johnson® outboards 50 Engine manufacturer112146 Mercury®/Mariner®, Cobra®, Volvo® DP & SX, Yamaha® O/B 2001 on 50 Engine manufacturer
a
c
b
d
112096
112106
112134
112120
* Sender style refer page 101
Dimensions a b c d mm mm mm mm
75mm Tacho 96 86 70 1375mm Speedometer 96 86 82 1350mm Electrical 61 53 63 11
section
11
98
ELE
CT
RIC
AL
www.bla.com.au
section
11
99
ELE
CT
RIC
AL
BLA Description Face Dia. *SenderCode mm Style
Tachometers: 112224 Tacho 7000 RPM inboard & outboard 75 Coil and O/board alt112226 Tacho 4000rpm diesel alternator 75 Motor Alternator N.B. Refer to page 95 for tachometer application guide
Speedometer:112230 Speedo kit 35 MPH 75 G included112232 Speedo kit 65 MPH 75 G included112234 Speedo kit 80 MPH 75 G included Depth:112240 Digital depth 0 - 60 metres 50 Supplied
Water temperature gauge:112242 Water temperature 120ºF - 240ºF 50 D112246 Water pressure gauge kit 0 - 40 psi 50 WP Included
Oil pressure:112252 Oil pressure 0 - 80 PSI 50 C112254 Oil pressure 0 - 100 PSI 50 C Hourmeter:112258 Hourmeter, 10,000 Hrs 50 Not required
Voltmeter:112262 Voltmeter, 8 - 16 volt 50 Not required
Ammeter:112267 Ammeter 60 - 0 - 60 50 Not required
Fuel:112268 Fuel 50 F
Trim:112272 Evinrude®/Johnson® outboards 50 Engine manufacturer112273 Honda® outboards 50 Engine manufacturer112274 Mercury®/Mariner®, Cobra®, Volvo® DP & SX, Yamaha® O/B 2001 on 50 Engine manufacturer
112224
Premier Pro Domed InstrumentsFeatures:• Very low profile black bezel follows the curve of the lens
to eliminate any water 'trapping' • White graphics and pointer on a black dial background• Where applicable, metric information is shown in blue• Light piping directs red light behind the translucent dial
and white light to the pointer for optimal night vision• Fog free domed glass lens is scratch resistant• Suitable for 24 volt application with additions of drop
resistor and 24 volt bulb • Shielded to prevent magnetic interference• Silicone dampened
* Sender style refer page 101
a
c
b
d
FOG FREE
112262
112268
112234
Dimensions a b c d mm mm mm mm
75mm Tacho 96 86 70 1375mm Speedometer 96 86 82 1350mm Electrical 61 53 63 11
Quality marine equipment
Lido Pro Domed InstrumentsFeatures:• Highly polished, curved stainless steel bezel that
eliminates water trapping• Black graphics on a white dial background• Pointers are black with a fire orange tip• White perimeter and red through dial lighting• Fog free, scratch resistant curved glass lenses• Shielded to prevent magnetic interference• Silicon dampening to eliminate pointer bounce• Suitable for 24 volt application with the addition
of a drop resistor and 24 volt bulb
a
c
b
d
* sender style refer next page
112352
112356
Dimensions a b c d mm mm mm mm
75mm Tacho 96 86 70 1375mm Speedometer 96 86 82 1350mm Electrical 61 53 63 11
112342
112332
FOG FREE
BLA Description Face Dia. *SenderCode mm Style
Tachometers: 112332 Tacho 7000 RPM inboard & outboard 75 Coil and O/board alt112334 Tacho 7000 RPM c/w hourmeter 75 Motor Alternator N.B. Refer to page 95 for tachometer application guide
Speedometer:112338 Speedo kit 35 MPH 75 G included112340 Speedo kit 65 MPH 75 G included112342 Speedo kit 80 MPH 75 G included
Depth:112350 Digital depth 0 - 60 metres 50 Supplied
Water temperature gauge:112352 Water temperature 120ºF - 240ºF 50 D
Oil pressure:112356 Oil pressure 0 - 80 PSI 50 C112358 Oil pressure 0 - 100 PSI 50 C Hourmeter:112360 Hourmeter, 10,000 Hrs 50 Not required
Voltmeter:112364 Voltmeter, 8 - 18 volt 50 Not required
Ammeter: 112318 Ammeter 60 - 0 - 60 50 Not required
Fuel:112368 Fuel 50 F
Water Tank:112376 Water 50 Refer page 74.
Trim:112370 Evinrude®/Johnson® outboards 50 Engine manufacturer112372 Mercury®/Mariner®, Cobra®, Volvo® DP & SX, Yamaha® O/B 2001 on 50 Engine manufacturer
section
11
100
ELE
CT
RIC
AL
www.bla.com.au
section
11
101
ELE
CT
RIC
AL
Oil Pressure Senders - Sender style C
• 1/8” NPT thread
• Single station (240-33 Ohm)
• Dual station (120-17 Ohm)
Pitot Tube - Sender style G
Suits 35 - 80 MPH speedometers. Durable white nylon construction. Pitot retracts to prevent damage from submerged objects. 5mm mount holes.
Pitot HoseTubing to suit speedometers 30 - 80 MPH. Available in up to 30 metre lengths, 4mm inside diameter. Sold per metre.
Tacho Wiring Harness - Evinrude®/Johnson®
Provides fast and easy plug-in wiring connections of outboard tacho’s to Evinrude®/Johnson® outboard forward controls. Three wire plug. Colour coded harness eliminates field wiring problems.
Water Temperature Senders - Sender style D
• Temp range 120ºF - 240ºF
• Single station (240 Ohm @ 120ºF)
• Dual station (120 Ohm @ 120ºF)
Fuel Gauge Sender - Sender style F
240 - 33 Ohm range (empty to full). Five hole mount flange. Adjustable for tank depth. Float arm can be left or right hand mounted. 100% corrosion proof construction.
Mercury®/Mariner® - Tacho Wiring Harness
Provides fast and easy plug-in wiring connections of outboard tacho’s to Mercury®/Mariner® outboard forward controls. Five wire plug. Colour-coded harness eliminates field wiring problems.
330
61
5mm dia. holes. 5 holes on a 54 mm bolt circle
Bend float arm as shown above for tanks less than
150mm deep
InDex Mark
Left or right hand
mount
b
a
10-32 thread
BLA Station PSICode gauge
112401 Single 80112404 Single 100112408 Dual 100
BLA Station Thread a bCode Size NPT mm mm
112414 Single 1/4 44 10112416 Single 3/8 43 10112420 Dual 3/8 44 8112422 Single 1/8 42 12
BLA TankCode Depth mm
112446 150-610
BLA Code
112428
55
120
55
BLA Code
112432
BLA Code
112452
BLA Code
112454
90
10-32 thread
50
112404
112416
430
84º
Quality marine equipment
Bilge Pump Control PanelThree position switch - manual/off/auto - to control electric submersible bilge pumps in conjunction with float switches. Features red and green indicator lights. Black finished alloy face with white graphics. Screw top fuse holder. Supplied with five amp fuse. Suitable for 12 volt applications only.
BLA Width Height Cut Out Intrusion MountCode Screws mm mm mm mm mm
114032 115 64 85x40 40 3 r/h
BLA Width Height Cut Intrusion MountCode Out Screws mm mm mm mm mm
114030 90 50 74x36 40 3 r/h
Battery Condition TesterBlack finished aluminium panel with simple colour coded gauge. Illuminated rocker switch selects test condition of battery one or two. Suits 12 volt.
BLA Face Intrusion MountCode Screws mm mm mm
114028 83x63 35 4 r/h
112294
BLA LengthCode mm 112470 200112472 250112474 290 112470
Bilge Pump Control Panel - With Alarm
Black finished aluminium panel with three position switch, fuse and audible and visual alarm function. Used to control any submersible bilge pump up to 10amp current draw, fitted with a float switch. Switch has manual/off/auto positions with spring return to off from the manual position. Red indicator light and audible alarm activates if bilge pump fails when in auto mode. A green light shows when operating correctly. Suitable for 12 volt DC applications only.
Battery Meter - Handheld
Measures remaining charge in any 12 volt battery. LED readout can be easily read in sunlight. Takes the guess work out of estimating a charge. Compact and durable, fits into your pocket or tackle box. 85(l) x 45(w) x 23(h) mm excluding negative probe and curly cord.
24 volt Gauge ConversionsVeethree engine gauges require the addition of a drop resister and 24 volt bulb when used with a 24 volt power supply. A green bulb filter is also available as an option for 12 or 24 volt bulbs.
12 volt Tank SendersThese 10 Ohm to 180Ohm liquid senders are level indicating devices compatible with VDO and Faria type petrol and water level gauges. Manufactured from AISI316 stainless steel with a watertight rating of IP687 they are suitable for fuel, sea water and are acid resistant. The sender top flange has an international standard five hole pattern and is supplied with sealing gasket, terminal ends, stainless steel fasteners and instructions.
BLA DescriptionCode
112390 24 volt bulb112394 Drop resistor suit 75mm gauge112396 Drop resistor suit 50mm gauge
BLA Code
114024
section
11
102
ELE
CT
RIC
AL
www.bla.com.au
section
11
103
ELE
CT
RIC
AL
Fuse Holder - Square
Panel mount, square face, quick inspection style, spring loaded fuse holder with side release. Suits 32 x 6mm (3AG) glass fuses. 12/24 volt, 10 amp maximum. Fuses not included.
Fuse Holder - 3AG
Panel mount, round screw cap, spring loaded fuse holder. Suits 32 x 6mm (3AG) glass fuses. 12/24 volt, 10 amp maximum. Fuses not included.
Momentary Switch - Plastic
Push button momentary switch. Black neoprene waterproof protector. Suitable for 12/24 volt applications.
Momentary Switch - Brass
Brass, waterproof starter switch supplied complete with removable rubber cover over brass switch. Chromed above dash button and trim ring. 12/24 volt, 25 amp.
Mini Toggle Switch - Stainless Steel
Miniature size two position switch with stainless steel covered, insulated plastic base and rubber booted toggle. Terminals are silver plated copper. Base is epoxy sealed for dust and moisture resistance. Rated to 6 amps at 12 volt DC.
Toggle SwitchChrome plated mini switch. Two positions: On/off. 12/24 volt, 15 amp.
Toggle SwitchesToggle switches as used in BEP splash proof and Micro switch panels. Chrome plated brass toggle. 12-24 volt, 20 amp DC. Dash thickness 5mm. Thread dia. 12mm, 55 (h) x 28 (w) x 14 (d) mm. Available in two position and three position versions with the option of momentary contact on one side. The neoprene rubber boot is purchased separately.
Single and Double Pole Toggle SwitchesThree position black toggle switch. 12/24 volt, 15 amp. Available in single and dual pole configurations.
BLA Panel Dia. Protrusion Intrusion MountCode Thickness Hole mm mm mm mm mm
114150 6 30 18 22 22
BLA Bezel Stem Dash O/all IntrusionCode Dia. Dia. Thickness Length mm mm mm mm mm
114152 21 16 23 72 54
BLA Dash Stem O/all Width Protrusion IntrusionCode Thickness Dia. Length mm mm mm mm mm mm 114160 8 12 45 32 18 23
BLA Poles Dash Stem O/all Width IntrusionCode Thickness Dia. Length mm mm mm mm mm
114164 2 6 12 59 35 35114166 1 6 12 59 35 31
114164114166
BLA Panel Face O/all MountCode Thickness Size Length Hole mm mm mm mm
114100 6 17x17 51 15
BLA Panel Dia. O/all MountCode Thickness Length Hole mm mm mm mm
114102 6 18 51 15
BLA Dash Stem O/all Width IntrusionCode Thickness Dia. Length mm mm mm mm mm
114158 3.5 6 33 7.5 19
BLA PositionCode
113471 On/Off/On113472 On/Off113473 Momentary On/Off113470 Black neoprene boot suits 113471 & 113472113491 Coarse thread suits 113473
114162 Waterproof boot (sold separately)
113472
Quality marine equipment
RotoSwitch®
Quality rotary switches with optional light module to display different light colours to designate differing positions of the switch. Rated to 20 amps @ 12 volts. Durable can design for long life. An optional illumination module is available for both two and three position switches. Switch body is 24 (w) x 34 (h) mm.
Push-Pull SwitchOn/off black knob has integral red indicator light that illuminates when switch is in on position. 12 volt, 15 amp.
Push-Pull SwitchMini, two position push-pull switch. Chrome plastic knob. 12 volt, 5 amp.
Push-Pull SwitchTwo position standard push-pull switch. Brass with chrome plastic knob. 12 volt, 20 amp.
Push-Pull SwitchThree position push-pull switch with off/on1/on1&2 positions. Brass with chrome plastic knob. 12 volt, 20 amp.
Rocker SwitchesRocker switch as used in BEP Contour Generation 2 splash proof switch panels. 12-24 volt, 16 amp DC. Panel thickness 3mm, 6mm blade terminals. Available in two and three position versions with the option of momentary contact.
Contura® Rocker SwitchesModern styled rocker switches that blend in with the mounting panel to be less obtrusive visually than toggle type switches. Single pole switches rated to 20 amps @ 12 volts, available with or without internal illumination.
Rocker SwitchesTraditional rectangular sectioned rocker switches, available with or without internal lighting. Single pole switches rated to 20 amps @ 12 volts.
BLA Dash Stem O/all Width IntrusionCode Thickness Dia. Length mm mm mm mm mm
114202 3 8 44 31 25
BLA Dash Stem O/all Width IntrusionCode Thickness Dia. Length mm mm mm mm mm
114206 20 9 98 27 72
BLA Dash Stem O/all Width IntrusionCode Thickness Dia. Length mm mm mm mm mm
114200 6 12 69 17 33
BLA Dash Stem O/all Width IntrusionCode Thickness Dia. Length mm mm mm mm mm
114204 20 9 79 22 54
BLA Positions Knob IntrusionCode Left Centre Right Dia. mm mm
SMP78710 - Off On 30 67SMP78720 - Off On (Mom) 30 67SMP78730 On(1) Off On(2) 30 67SMP78820 On(2) Off On(1&2) 30 67
BLA Description Face Cut Out IntrusionCode Size mm mm
Srk19400 Off/on 25x50 21x37 38Srk19410 Off/on (mom) 25x50 21x37 38Srk19420 On/off/on 25x50 21x37 38Srk19440 Off/on - illum 25x50 21x37 38Srk19460 On/off/on - illum 25x50 21x37 38
SMP78870 Light module - clear/red SMP78920 Light module - green/black/green
BLA Switch Face Size Cut Out IntrusionCode mm mm
113792 Off/on 14x32 11x30 26113793 Momentary/off 14x32 11x30 26113794 On/off/on 14x32 11x30 26113795 Mom/off/mom 14x32 11x30 26
BLA Description Face Cut Out IntrusionCode Size mm mm
Srk40100 Off/on - Illum 25x44 22x37 38Srk40110 On/off/on - Illum 25x44 22x37 38Srk40140 Off/on 25x44 22x37 38Srk40150 Off/on (mom) 25x44 22x37 38Srk40170 On/off/on 25x44 22x37 38
SMP78710
SRK19460
113792
SRK40110
Contura® 111 Rocker SwitchesModern styled rocker switches that blend in with the mounting panel to be less obstructive visually than toggle type switches. Constructed of non-corrosive black plastice with IP66 and IP68 certification against prolonged exposure to spray. Meets UL 1500 and ISO8846 ignition protection requirements.
BLA DescriptionCode
Srk19700 Off/on Illuminated SPSTSrk19740 On/off/on Illuminated SPDTSrk19780 Mom/on/off/on Illuminated SPDT
SRK19700
Features:• Red LED illumination when in "on" position• Supplied with neoprene mounting gasket• Rated 20A @ 12V
Dimensions:• Face size: 24x49mm• Cut out size: 21x37mm• Intrusion: 38mm
section
11
104
ELE
CT
RIC
AL
www.bla.com.au
section
11
105
ELE
CT
RIC
AL
BLA Code
SMP39830
BLA Code
SMP39100
BLA Code
SMP28870
BLA Code
Un12140
Marine Ignition SwitchDie cast zinc housing with 4 position access off-run-start. Chromed knurled face nut. Four screw stud terminals
Specifications:• 4 position conventional accessory off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 15 amps @ 12VDC accessories• 14.5mm mounting hole• 16mm panel thickness (max)
Ignition SwitchMarine grade glass-filled polyester switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts. 20 amp rating.
Specifications:• 3 position magneto off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 23mm mounting hole• 29mm panel thickness (max)• No choke
Emergency Cut-Off Switch• Emergency cut-off switch with coiled lanyard• Will provide a "normally open" or "normally closed" circuit• Kills ignition when lanyard is pulled• For use with conventional or magneto ignitions• Replaces OMC®/BRP® 585134
BLA Code
STG21600
Heavy Duty Power Trim & Tilt Switch• Super tough zinc die cast construction• Heavy copper screw terminals• 50 amps @ 12VDC• Mom.On-Off-Mom.On
Ignition Switch - With Choke
Marine grade glass-filled polyester switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts. Specifications:• 3 position magneto off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 7 amps @ 12VDC choke• Terminal to power separately
controlled choke circuit• 23mm mounting hole• 29mm panel thickness (max)
BLA Code
SMP40970-1
BLA Code
SMP41000
BLA Code
SMP41070-2
Ignition Switch - With Choke
Marine grade glass-filled polyester switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts.
Specifications:• 3 position magnet to off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 7 amps @ 12VDC choke• 23mm mounting hole• 16mm panel thickness (max)• Push to choke
Mercury Ignition Swtich - With Choke
Marine grade glass-filled polyester switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts.
Specifications:• 3 position magnet to off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 7 amps @ 12VDC choke• 23mm mounting hole• 16mm panel thickness (max)• Push to choke
Emergency Cut-Off Switch• Emergency cut-off switch with coiled lanyard• Will provide a "normally open" or "normally closed" circuit• Kills ignition when lanyard is pulled• For use with conventional or
magneto ignitions
SMP40990 Landyard only
Quality marine equipment
Marine Ignition Switch - Short Shaft
Marine grade glass-filled polyester constructed ignition switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts. Specifications:• 4 position magneto accessory off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 15 amps @ 12VDC accessory• 16mm panel thickness (max)• No choke circuit
BLA Code
SMP39720
Marine Ignition Switch - Short Shaft 6 Terminals
Marine grade glass-filled polyester constructed ignition switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts. Specifications:• 4 position magneto accessory
off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 15 amps @ 12VDC accessory• 16mm panel thickness (max)• No choke circuit
Marine Ignition Switch - Short Shaft 5 Leads
Marine grade glass-filled polyester constructed ignition switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts. Specifications:• 3 position magento off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 15 amps @ 12VDC accessory• 16mm panel thickness (max)• No choke circuit
BLA Code
SMP39730
BLA Code
SMP39740
Ignition Switch - With Choke
Marine grade glass-filled polyester constructed ignition switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts. Specifications:• 4 position magneto accessory off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 15 amps @ 12VDC accessory• 7 amps @ 12VDC choke• 16mm panel thickness (max)• Push to choke
BLA Code
SMP39710
Marine Ignition Switch - Short Shaft
Marine grade glass-filled polyester switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts. Specifications:• 3 position conventional off-run-start• 15 amps @ 12VDC ignition • 30 amps @ 12VDC solenoid• 23mm mounting hole• 16mm panel thickness (max)
OMC®/BRP® Ignition Switch - With Choke
Marine grade glass-filled polyester switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shortsSpecifications:• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid • 7 amps @ 12VDC choke• 23mm mounting hole• 16mm panel thickness (max)• Push to choke• Suits many OMC®/BRP® applications
Marine Ignition Switch - Brass
Brass housing with corrosion resistant construction, with three screw tab terminals. Brass back nut and chrome hex front nut.
Specifications:• 3 position conventional off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 23mm mounting holes• 29mm panel thickness (max)
BLA Code
SMP41030
BLA Code
SMP39760
BLA Code
SMP39200
Marine Ignition Switch - Long Shaft
Marine grade glass-filled polyester switch with an inner seal between cylinder lock and contact plate providing ultimate protection against corrosion. Non-conductive housing eliminates potential shorts.
Specifications:• 3 position conventional off-run-start• 15 amps @ 12VDC ignition• 30 amps @ 12VDC solenoid• 23mm mounting hole• 29mm panel
thickness (max)
BLA Code
SMP39060-1
section
11
106
ELE
CT
RIC
AL
www.bla.com.au
section
11
107
ELE
CT
RIC
AL
Power Plug and SocketRectangular cigarette lighter style, injection moulded black nylon, with secured plastic cover. Supplied as a set, socket and plug. 10 amps maximum.
Power SocketStainless steel cigarette lighter style socket with secured plastic cover. Supplied with power, earth wires and terminals. 10 amps maximum.
Cigarette Lighter/Map LightAll stainless steel cigarette lighter incorporating a chart light and switch. 12 volt, 20 amp.
Extension CordTwo core cable with 12 volt cigarette lighter style plug one end, cigarette lighter style socket the other.
Power Socket AdaptorAdaptor for connecting appliances with cigarette lighter style plug to battery terminals.
Power Socket Multi AdaptorTwo core cable, 12 volt cigarette lighter style plug one end, triple lighter style socket the other. LED power indicator at socket end. Plug has an integral fuse to protect overload. Supplied with double sided tape to fix triple socket.
Heavy Duty Power Plug and SocketUniversal design for two or three wire configuration to suit 12-36 volt systems and up to 40 amp current draw. Watertight sealing cap, corrosion resistant, plated brass electrical components. Locks into receptacle to provide a watertight seal.
Sutars® Power PlugCigarette lighter style plug to suit the common Sutars® socket. Suitable for use on 12 or 24 volt systems with appliances drawing up to 16 amps. Screws apart for fast simple connection with screw terminals. A range of Sutars® power sockets in housings to match the Frilight interior light switches are also available.
BLA Bezel O/all Intrusion Mount MountCode Length Hole Screws mm mm mm mm mm
114252 38x53 125 77 22 4 r/h
BLA Socket Socket Intrusion Mount MountCode Facia O/all Length Screws Hole mm mm mm mm mm
114236 56x32 58 50 4 c/s 28
BLA Facia O/all Intrusion Mount MountCode Length Screws Hole mm mm mm mm mm
114238 56x38 63 54 4 r/h 28
BLA O/all Length Dia.Code mm mm
113256 70 20
BLA Cable Max. SocketCode Length Housing m amps mm
114258 3.0 10 90x50x34
BLA Cable Max.Code Length m amps
114254 3 10
BLA Cable Length Max.Code m amps
114256 1 10
BLA Socket Intrusion Mount MountCode Face Hole Screws mm mm mm mm
114276 60x43 45 29 4 c/s
Quality marine equipment
Two Pin Cable ConnectorChrome brass, flush mount cable connector base with two pin rubber booted plug. Supplied with plastic weatherproof cap. 12/24 volt, three amp.
Weatherproof ConnectorsChromed brass base and plug housings. Screw on electrical plug and weatherproof cap. Plug has rubber gland to weatherproof cable entry. Cap supplied complete with stainless steel security chain. Pins are configured to prevent accidental reverse polarity connection.
Heavy Duty Weatherproof ConnectorsChrome plated brass, flanged base and plug housing with bakelite insulator and brass screw terminals. Plug has a rubber cable entry gland and screw locking mechanism. Plastic screw cap with security chain for when plug is not fitted. Pins are sized to prevent reverse polarity connection.
Nylon Cable ConnectorGlass reinforced black nylon base and plug housing with bakelite insulator and brass screw terminals. Plug has a rubber gland to accept sealant to weatherproof cable entry and a screw locking mechanism. Includes screw on cap and security chain. Pins are sized to protect polarity.
Watertight ConnectorsBlack plastic, deck mounted plug and socket waterproof to International Standard IP67. Features gold plated contacts to produce a high current rating due to corrosion protection, low contact resistance, high electric continuity and current distribution on the contacts.
Anderson PlugsHeavy duty, DC rated two circuit connectors. Feature a self cleaning contact design that resists arcing. Grey plastic housing with silver plated solid copper contacts, spring loaded to resist vibration arcing. Ideal for high load applications such as trailer winches, trolling motors and battery connections. Sold individually. Two required to make a connection.
Quick Connect Power PlugHeavy duty, two pin in line flat connector with short 5mm² cables fitted with bullet terminals one end and eye terminals the other. Moulded nylon body with tinned copper contacts. Two parts are polarity conscious.
Jumper LeadsFully insulated spring loaded clamps. High specification copper cable with double insulation. 3 metres long. 400 amp rated. Colour coded for polarity.
114261 Two pin plug only
BLA Base O/all Intrusion Deck MountCode Dia. Length Hole Screws mm mm mm mm mm
114260 38 43 15 16 3 c/s
BLA Max. LengthCode O/all amps mm
115626 25 500
BLA Poles Max. Height Base Dia.Code No. amps mm mm
114286 6 36 86 46114288 9 36 86 46
BLA Pin Amp O/all BaseCode Length Dia. mm mm
114270 2 5 65 45114272 3 5 65 45
114264
114260114261
BLA Pin Amp O/all BaseCode Length Dia. mm mm
114280 2 5 76 48
BLA Max. LengthCode amps m
114330 400 3
BLA Pin Amp O/all BaseCode Length Dia. mm mm
114264 2 3 56 36114266 3 3 56 36114268 4 3 56 36
114272
114286BLA Max. Max. Cable Base HeightCode amps mm2 mm mm
115612 50 8 48x35 16115614 175 32 80x55 25
section
11
108
ELE
CT
RIC
AL
www.bla.com.au
section
11
109
ELE
CT
RIC
AL
Battery Selector SwitchBattery selector switch with off/1/all/2 positions. Enables isolation of one battery or battery bank from the other. Also provides the ability to link both batteries in parallel. Suitable for surface or partial recessed mounting options.
Specifications:• Voltage: 6-32V DC• Continuous Rating:
250amps DC• Intermittent Rating:
360amp DC
Battery Selector Switch - With Key
Battery selector switch with key lock providing added security to engine starting. Four position options enable isolation of one battery or battery bank from the other. Also provides the ability to link both batteries in parallel. The unit can be surface or partially recess mounted.
Specifications:• Voltage: 6-32V DC• Continuous Rating:
250 amps DC• Intermittent Rating:
360 amps DC
Battery Selector Switch - Alt Field Disconnect
Four positions battery selector switch with 0/1/1+2/2 options. Enables isolation of one battery or battery bank from the other, or to link up both batteries in parallel for additional power. Alternator field disconnect allows switching to any position when engine is running without damaging alternator. Designed for surface mounting. Plastic caps cover the mounting screws.
Specifications:• Voltage: 6-32V DC• Continuous Rating:
250 amps• Intermittent Rating:
360 amps
Battery Selector SwitchBattery selector switch with off/1/both/2 positions. Enables isolation of one battery or battery bank from the other, or link up both batteries in parallel for additional power. Engines must be shut down before turning to ‘off’ position. Rotary dial has a spring loaded keeper to positively lock the selected position. Designed to be surface mount with cable entry from below.
Specifications:• Voltage: 6-32V DC• Continuous Rating:
235amps• Intermittent Rating:
300amps
Battery SwitchSimple key type, two position switch with insulated black plastic housing, red removable plastic key and all brass electrical contacts. Suitable for 12 or 24 volt. Unit may be surface mounted or partially recessed behind the panel with just the stem protruding. Engines must be shut down before turning to ‘off’ position. Rated maximum load, 500 amps for ten seconds. Overall length includes key.
Battery Switch - Weatherproof
Key type, on/off switch with removable plastic key for security. Key and switch are both fitted with weatherproof boots. All brass electrical contacts. Engines must be shut down before turning to ‘off’ position. Suitable for 12 or 24 volt. Rated maximum load, 500 amps for ten seconds. Overall length includes key.
BLA O/all Base Stem Stem Mount TerminalCode Length Dia. Length Dia. Screws Stud mm mm mm mm mm mm
114308 102 65 33 23 6 r/h 10114309 Spare key only (without boot)
BLA Base O/all Mount Terminal Alt. FieldCode Dia. Depth Screws Stud Stud mm mm mm mm mm
114298 140 73 5 r/h 8 3
BLA Base O/all Mount TerminalCode Size Depth Screws Stud mm mm mm mm
114304 137x137 72 5 c/s 10
BLA Base Cut Out O/all Mount TerminalCode Dia. Dia. Depth Screws Stud mm mm mm mm mm
114294 134 96 70 5 r/h 8
BLA Base Cut Out O/all Mount TerminalCode Dia. Dia. Depth Screws Stud mm mm mm mm mm
114296 134 96 70 5 r/h 8
BLA O/all Base Stem Stem Mount TerminalCode Length Dia. Length Dia. Screws Stud mm mm mm mm mm mm
114314 102 65 33 23 6 r/h 10114309 Spare key only (without boot)
Quality marine equipment
Battery Switch - Double Pole
Battery master switch with removable key, designed to isolate both positive and negative circuits. It is not recommended for switching start and house battery systems at the same time. Both key and switch are fitted with weatherproof boots. Contacts are silver plated copper.
Specifications:• Voltage: 12-24V DC• Continuous Rating: 120 amps• Cranking Rating: 2000 amps
Battery SwitchKey type, battery master switch with insulated black plastic housing and removable red key. Both key and switch are fitted with weatherproof boots. Contacts are silver plated copper. Unit may be surface mounted or partially recessed behind the panel with just the stem protruding.
Specifications:• Voltage: 12-24V DC• Continuous Rating: 140 amps• Cranking Rating: 2000 amps
Battery Master SwitchesTwo position, on/off battery isolation switches. Surface mount. Available with or without key lock. Engines must be shut down before turning to 'Off' position.
Specifications:• Voltage: 50V DC max.• Continuous Rating:
250amps DC• Intermittent Rating:
360 amps DC
Battery Selector SwitchesFour position isolation switches, off/1/all/2. Select between batteries for starting, charging, load or parallel both batteries. Surface mount. Also available with key lock for added security. Engines must be shut down before turning to ‘off’ position.
Specifications:• Voltage: 50V DC
maximum• Continuous Rating:
250 amps DC• Intermittent
Rating: 360 amps DC
Battery Switch - Alternator Field Disconnect
Four position isolation switch - off/1/all/2. Select between batteries for starting, charging, load or both batteries in parallel. Alternator field disconnect prevents damage to alternator if switched to 'off' while engine is running.
Specifications:• Voltage: 50V DC max.• Continuous Rating:
250 amps DC• Intermittent Rating:
360 amps DC
Heavy Duty Battery Selector Switch - Alternator Field Disconnect
Four position isolation switch - off/1/all/2. Select between batteries for starting, charging, or both batteries in parallel. Surface mount, fibre reinforced polycarbonate body, brass terminals. Alternator field disconnect prevents damage to alternator if switched to 'Off' while engine is running.
Specifications:• Voltage: 50V DC max.• Continuous Rating: 300
amps DC• Intermittent Rating: 850 amps
DC (5 mins on / 5 mins off)
BLA Base Height Mount TerminalCode Dia. Screws Stud mm mm mm mm
401113 134 67 5 r/h 8
BLA Key Base Height Mount TerminalCode Lock Dia. Screws Stud mm mm mm mm
401101 No 134 67 5 r/h 8401102 Yes 134 67 5 r/h 8
BLA Base Height Mount TerminalCode Dia. Screws Stud mm mm mm mm
401120 139x139 86 6 r/h 12
114317 Spare key with moulded boot
114317 Spare key with moulded boot
BLA Base O/all Stem Stem Mount TerminalCode Dia. Length Length Dia. Holes Stud mm mm mm mm mm
114316 64 105 34 25 6 r/h 10BLA Base O/all Stem Stem Mount TerminalCode Length Length Dia. Holes Stud mm mm mm mm mm
114312 90x90 132 34 25 6 r/h 10
(A)
(B)
BLA Key Base Height Mount TerminalCode Lock Dia. Screws Stud mm mm mm
(A) 401111 No 134 67 5 r/h 8(B) 401112 Yes 134 67 5 r/h 8
section
11
110
ELE
CT
RIC
AL
www.bla.com.au
section
11
111
ELE
CT
RIC
AL
Battery Charger - Portable The new MK110PA portable marine battery charger is designed to deliver a precise, proper charge to marine batteries without over or under charging as is often the case with standard automotive battery chargers. It utilises a multi-stage charging system; a feature not found on most portable chargers, to charge up to 50% faster than a single stage (bulk) 10amp portable charger, while properly protecting the batteries. Over charging can damage the useful life of the battery. Likewise under charging over time, will reduce the discharge time and shorten the battery life as much as 20%. The fully automatic charging system utilises bulk, absorption and maintenance cycles. It delivers 10 amps maximum charge in bulk mode until the voltage reaches the absorption level, at which point the charger varies the power output to maintain voltage. Once the power output drops to a preset level the charger goes into maintenance mode maintaining the voltage at a lower level. An LED display indicates power on, charging, full charge and check connection. The unit features short circuit and reverse polarity protection, a safety feature which prevents the charger from operating if improperly connected to the battery. It is suitable for use with 12V/6 cell batteries which are flooded wet cell, maintenance free or AGM type only.
BLA Output Battery Input Length Width Height Max. Capacity ACCode amps amp/hrs volts mm mm mm
114578 10.5 50-130 230/240 127 180 165114580 10 50-130 230/240 178 229 197
100%
75%
50%
25%
0%
(ºC)-12 -6.5 -1 4.5 10 15.5 21 26.5 32 37.5 43.5
100%
75%
50%
25%
0%
(ºC)-12 -6.5 -1 4.5 10 15.5 21 26.5 32 37.5 43.5
Battery Chargers - Waterproof On-Board Suitable for permanent on-board mounting to eliminate the hassle of traditional portable chargers. Available in two models to suit single or dual battery bank installations and provide fully automatic, multi-stage charging to properly maintain the batteries. By controlling the current and voltage during the charging cycle, Minn Kota chargers recharge faster than conventional automotive battery chargers while preventing over charging which can damage and shorten battery life. They include an automatic temperature compensation feature that adjusts the output voltage to assure the battery reaches its gassing threshold and achieves a full charge. The temperature compensation feature also protects the batteries from ‘boiling’ due to over charging at high temperatures. The 114582 single output charger utilises a two stage charging system (bulk and maintenance) while the 114584 dual output charger utilises a three stage system as explained above for 114580. The two 5 amp outputs may be connected to a single battery for 10 amps total output. An LED display indicates power on, charging, full charge and check connection. These chargers are saltwater tested, shock and vibration resistant and waterproof to IP67 standard. Suitable for use with 12V/6 cell batteries which are flooded wet cell, maintenance free or AGM type only.
114582
114584
100%
75%
50%
25%
0%
(ºC)-12 -6.5 -1 4.5 10 15.5 21 26.5 32 37.5 43.5
114578
BLA Model Battery Output Total Input Length Width Height WeightCode Banks Per Bank Output amps amps volts mm mm mm kg
114582 MK106A 1 6 6 230/240 222 120 75 2.0114584 MK210A 2 5 10 230/240 292 190 102 4.9114586 MK220A 2 10 20 230/240 343 190 102 6.8
Quality marine equipment
Battery Chargers - SBC ADv Plus Medium Power
These switch mode battery chargers provide high level performance, automatic three stage (bulk, absorption, float) charging to most types of marine batteries. The bulk charging phase occurs when the batteries require more current than the charger can supply, i.e. when the batteries are low or when a high load is connected. The absorption phase occurs when the charger provides the input current required to maintain the batteries at a constant absorption voltage. When the current required is less than 20% of the maximum charger output value, the charger will change to the float phase. In float phase, the battery charger outputs the current required to maintain the batteries at a constant float voltage. In this phase, as the batteries reach maximum capacity they will absorb close to zero amps. This float mode allows the batteries to be on charge without the risk of overloading. When the current required exceeds 20% of the maximum output, the charger returns to the absorption mode. A user set charge selector switch changes charging outputs to suit liquid, AGM or gel electrolyte batteries. Multiple, independently fused outputs to charge up to three batteries or banks of batteries via a master and slave system.
These chargers are compatible with most generator outputs and may be used as a power supply without batteries. They have the ability to provide a full power output even with a low supply voltage and produce a low residual fluctuation (ripple lower than 30mV RMS). The universal AC supply voltage makes them ideal for vessels travelling internationally. Features include protection for output short circuit, overloading, output over voltage and overheating.
Quick battery chargers are capable of full power output in ambient temperatures from -20º to 50º C. Cooling is provided by an automatic, variable speed fan. The control panel combines three LED’s and LCD display to monitor input power status, output status, output phase and error status with multiple coded messages. Polished stainless steel and plastic case. A DB9 connector provides connection for the optional remote display panel via a CAN-BUS data transfer interface.
Battery Chargers - SBC ADv Plus High Power
Quick SBC Advanced Plus High Power battery chargers provide all of the features and functions of the medium power chargers above with the additional function of digital current sharing which provides for up to three Quick High Power Chargers to be connected in parallel to produce up to 240 amps output to suit battery bank capacities up to 2400 amp hours. They share the same hi-tech three stage charging system with multiple outputs and the same control panel functions as the medium power chargers above. The 114518 12 volt charger accepts universal AC input while the 24 volt output models are designed for 240 volt AC input only.
BLA Output Battery Battery Outputs Input Base DepthCode Max. Capacity No. of AC Size amps volts amp hrs volts mm mm
114512 30 12 140-300 3 100-280 272x334 127114514 40 12 180-400 3 100-280 272x334 127114516 60 12 270-620 3 100-280 272x412 127114524 30 24 140-300 3 100-280 272x412 127
BLA Output Battery Battery Outputs Input Base DepthCode Max. Capacity No. of AC Size amps volts amp hrs volts mm mm
114518 80 12 360-800 3 100-280 272x495 127114526 60 24 270-600 3 200-280 272x495 127114528 80 24 360-800 3 200-280 272x495 127
(V) BULK
CHARGE DIAGRAM FOR ALL MODELS
(V) ABSORBTION
(V) FLOAT
IMAX
20% IMAX TIME
TIME(I)
ABSORBTION FLOAT NEW CYCLE
114524
114512
114518
section
11
112
ELE
CT
RIC
AL
www.bla.com.au
section
11
113
ELE
CT
RIC
AL
Battery Charger Remote Display PanelRemote display panel for use with the Quick medium power and high power battery chargers opposite. Allows the status of the charger to be monitored via the CAN-BUS interface. Reproduces the information displayed on the main control panel via three LED's and an LCD. Monitors input power status, output status, output phase and error status with multiple coded messages. This unit is not a remote control panel able to switch the power to the charger from a remote location.
Battery Charger Remote Display PanelRemote display panel for use with the Quick medium power and high power battery chargers opposite. The multi function LCD provides an alpha numeric display of the voltage of up to three outputs together with the total power output of the charger and the phase of charge. The unit accepts information from the charger via the CAN-BUS data transfer interface. The screen is backlit with two brightness levels and features automatic display contrast according to ambient temperature.
Battery Chargers - SBC ADv Plus Mini/Low Power
Quick SBC Advanced Plus Mini/low Power battery chargers use micro processor controlled switch mode technology to provide fully automatic, three stage charging to most types of marine batteries. A user set charge selector switch changes charging output to suit liquid or gel electrolyte batteries. The three stage charging system uses bulk, absorption and float modes to ensure that the batteries automatically receive the maximum amount of useful charge, reducing the charge time and protecting the batteries from overcharging. A three LED control panel indicates input power, charge mode or float mode. Multiple, independent outputs are available to charge multiple batteries via a master and slave system using internal battery isolator diodes, with the total output being that listed below. Each output can be to the maximum amps output of the charger. These units produce a low residual fluctuation on output (ripple lower than 30mV rms). They are compatible with input from most generators and can work efficiently in ambient temperatures from -20º to 50º C. Protection is provided against reverse polarity (with internal fuse), overload, overheating and output short circuit. The two larger models include fan forced cooling. The 114510 model includes a remote analogue signal output via a DB9 connector. Anodised aluminium and plastic casings.
BLA Power Current Face IntrusionCode Supply Max. Size volts mA mm mm
114544 8-30 120 120x65 30
BLA Output Battery Battery Outputs Input Base DepthCode Max. Capacity No. of AC Size amps volts amp hrs mm mm
114502 8 12 35-80 2 210-260 155x205 75114506 12 12 55-120 2 210-260 155x205 75114510 25 12 110-250 3 210-260 155x268 75
BLA Power Current Face IntrusionCode Supply Max. Size volts mA mm mm
114540 8-30 100 60x65 16
114510
114502
Quality marine equipment
Shore Power Systems 220-250 voltUtilising a 'locking style' design, which provides superior waterproofing, corrosion resistance, and peace of mind from the knowledge your shore power system is safely locked in place. The easylock™ system provides locked power connection with a quarter of a turn. Inlet covers also have threaded boss for additional security as well. Glass filled polyester body, incorporating brass electrical connectors. Available in a choice of 16 amp or 32 amp systems depending on the current capacity required. These two systems are not interchangeable. 240V AC shore power system power points and plugs to be fitted by a licensed electrician or a registered electrical contractor.
Power Inlet Points - Polyester
Marine grade UV stabilised glass filled polyester construction with tinned brass electrical connectors and easy lock quarter turn system. A special cam feature on the hinged cap allows it to stay open during connection. A soft touch unlocks the watertight cap for closing. Cap is trimmed with a stainless steel centre trim piece. Rear safety enclosure provides eight positions for cable entry.
Power Inlet Points - Stainless Steel
Solid cast 316 grade stainless steel face plate with waterproof cap. Tinned brass electrical connectors and easy lock quarter turn system. Cap holds in the open position, a soft touch releases the cap for closing. Rear safety enclosure provides eight positions for cable entry.
Power Inlet Connectors CoverMarine grade flexible plastic cover with threaded ring to waterproof and further secure the power inlet socket. Internal ribs provide secure push fit on the socket.
BLA Rated Face Protrusion Intrusion Cut OutCode Size Dia. amps mm mm mm mm
114700 16 99x109 21 74 58114750 32 99x109 21 102 61
BLA Rated Face Protrusion Intrusion Cut OutCode Size Dia. amps mm mm mm mm
114704 16 82x105 30 74 58114754 32 82x105 30 102 61
BLA SuitsCode
114720 114715114770 114765
114720
114750114704
114754
114700
114770
Power Inlet ConnectorsMarine grade moulded construction with stainless steel fastenings and tinned brass electrical contacts. Ribbed cover provides grip. Connects positively with quarter turn. Provided with weatherproof sealing cap.
BLA DescriptionCode
114715 16 Amp 114765 32 Amp114724 Replacement Cap to Suit 16 Amp Connector114774 Replacement Cap to Suit 32 Amp Connector
114715
Shore Power LeadsMarine grade, fine stranded, soft annealed copper wire for maximum flexibility. Covered with a bright yellow outer for high visibility. Rated to 600 volts, supplied in a choice of 16 or 32 amp rated capacity with the corresponding easy lock quarter turn connector with waterproof cover and threaded boss fitted to one end only. The other end is left blank to enable matching to shore power socket.
BLA Rated Length Outside Dia.Code amps m mm
114730 16 15 11114780 32 15 22
N.B. Non-compliant Australian product, suitable for export only.
section
11
114
ELE
CT
RIC
AL
www.bla.com.au
section
11
115
ELE
CT
RIC
AL
Glass filled polyester body with water tight cap featuring a stainless steel trim ring. Suits international phone and TV cable plugs. Cap positively latches in the closed position. Rear enclosure protects the phone input.
Phone and Cable Tv Inlet Ground Fault Circuit InterrupterA Ground Fault Circuit Interrupter is a requirement of the ABYC where a power point is mounted in a head, galley, machinery space or on a deck area exposed to weather. The GFCI operates on the same principal as a earth leakage circuit breaker, measuring active and neutral current flow in and out of the unit. The unit will immediately trip when a difference of 30mA is recorded between active and neutral current. Ideally suited for a power supply where electrical appliances are used outdoors or near water. 110V/15W for vessels cruising internationally or manufactured for export. A weatherproof cover is also available.
114910USA pattern
BLA Description Base Protrusion Intrusion Cut OutCode Size Dia. mm mm mm mm
114910 GFCI unit 70x113 7 32 45x70
BLA Base Protrusion Intrusion Cut OutCode Size Dia. mm mm mm mm
114900 84x96 28 41 60
Power Outlet SocketSingle 10 amp double pole 240V AC power outlet socket in a flush mount white plastic housing with weatherproof hinged flap and sealing gasket. Waterproof to IP34 standard. Accepts standard 10 amp household type plugs. Socket to be fitted by a licensed electrician or registered electrical contractor.
Power Inlet PointSingle 15 amp 240V AC power inlet point in a flush mount white plastic housing with hinged flap and seating gasket. Partially insulated active and neutral pins. Earth pin is the larger 15 amp style. Installation requires a licensed electrician or registered electrical contractor.
Shore Power PlugRewireable extension cord plug with partially insulated active and neutral pins. Earth pin is the larger 15 amp style commonly used on marina power supply sockets. Plug to be fitted by a licensed electrician or registered electrical contractor.
BLA Code
114919
BLA Height Width DepthCode mm mm mm
114916 101 80 38
BLA Height Width DepthCode mm mm mm
114918 101 80 38
BLA Code
114922
Rewireable 240vAC 10 Amp 3 pin Power PlugRewireable extension cord plug with partially insulated active and neutral pins suitable for use with 3 core 1.00mm² and ordinary duty flexible cord. Plug to be fitted by a licensed electrician or registered electrical contractor.
Quality marine equipment
voltage ReducersSwitching voltage reducers designed to provide a regulated 13.5V DC power supply from a 20-30V DC source. They produce a low residual output fluctuation (ripple lower than 50mV RMS). The until is protected against short circuit, output over voltage and reverse polarity. Anodised aluminium case with grooved heat sink for cooling efficiency. The output current is continuously rated.
BLA Output Output Supply Base DepthCode Max. amps volts volts mm mm
114550 8 13.5 20-30 172x60 25114552 12 13.5 20-30 172x90 25114554 18 13.5 20-30 200x100 35
Guest® 70 Amp Battery IsolatorGuest® isolator featuring optimized heat sink design for maximum performance with minimized voltage drop across isolation barrier using Schottky type diodes.
Features:• Each output individually capable of carrying the full
alternator load• Fixed cable posts for secure connections• Waterproof components for harsh environment
performance• Usage: 1 Alternator / 2 Batteries• Max. Output per Alternator: 70 Amps• Operation: 12V to 48V• Replaces previous model 114360 • Base size: 145mm x 115mm
BLA Amp Width O/all HeightCode Length mm mm mm
114482 50 147 262 65114480 30 147 141 65
BLA Amp Width O/all HeightCode Length mm mm mm
114380 70 145 115 90114386 70 265 140 115
114554
114552
114550
114480
114482
Guest® Galvanic IsolatorsThe galvanic isolator is a passive device that has no control functions, but serves to block the DC galvanic currents on the AC earth ground conductor. It stops the accelerated corrosion caused by these currents and extends the life of important vessel components and sacrificial anodes. 5 year warranty.Amp rating is continuous. Suitable for 115/230VAC 50/60Hz.
section
11
116
ELE
CT
RIC
AL
www.bla.com.au
section
11
117
ELE
CT
RIC
AL
Standard Cable TiesBlack, UV resistant cable ties. A quick and reliable method for securing cables, etc. Manufactured from black polyamid 6.6 nylon. Self locking with or without tools. Cable ties are self extinguishing. Fuel, oil and grease resistant. Sold in packs of 100. 115020 has moulded mount hole to suit 5mm screws.
Cable Tie Mount BasesScrew or adhesive base. Double entry type. Moulded in black polyamid 6.6 nylon. Sold in packs of 100.
Flex SleevingFlex sleeving is a lightweight continuous jacketing for bundling and protecting wires, cables and hoses. Braided from black polypropylene yarns. The unique expansion characteristics allow the sleeve to expand up to four times its normal diameter. Ends can be heat welded to prevent fraying.
Spiral WrapFlexible polyethylene tubing used to wrap multiple wires into one tidy lead. The length is at the unstretched nominal diameter.
Loom TubeLoom tube is a split corrugated black conduit designed for quick, neat, cost effective wire harnessing and protection. Manufactured from black, flame retardant (UL94-V2) polyethylene copolymer. Maximum temperature rating 90ºC.
Heat ShrinkThis flexible heat shrink tubing is primarily designed for use in electrical installation but also used to prevent fraying on ropes etc. Shrink temperature is 90ºC and the shrink ratio is 2:1. Tubing is sized by the tubing diameter, not lay flat dimension.
(B)
(A)
BLA Bundle Tensile Length WidthCode Dia. Strength mm kg mm mm (A) 115000 21 8.16 98 2.5(A) 115002 35 13 140 3.6(B) 115004 50 22 200 4.8(B) 115006 79 22 290 4.8(B) 115008 103 22 360 4.8(C) 115020 54 20 200 4.8
(C)
BLA Max. Cable Base Height MountCode Tie Width Dim. Screws mm mm mm mm
115030 3.6 19x19 6 4 c/s115032 4.8 27x27 8 4 c/s
BLA I.D. I.D. LengthCode Closed Open Closed mm mm m
115050 13 35 30115052 20 50 30115054 32 75 15
BLA Inside Outside RollCode Dia. Dia. Length mm mm m
115060 7.4 10.2 10115061 10.7 14.1 10115062 13.2 17.5 10115063 15.0 19.5 10115064 19.3 23.8 10115066 28.0 34.0 10115067 36.0 39.5 25115068 48.0 54.0 25115069 21.2 25.8 50
Expanded as suppliedFully recovered after heating
BLA Colour Supplied Recovered LengthCode Flat Dia. Wall Thick mm mm mm m
115070 Red - 1.6 0.43 1.2115071 Black - 1.6 0.43 1.2115072 Red - 2.5 0.44 1.2115073 Black - 2.5 0.44 1.2115074 Red - 3.5 0.44 1.2115075 Black - 3.5 0.44 1.2115076 Red 8 5.4 0.56 1.2115077 Black 8 5.4 0.56 1.2115078 Red 11 6.4 0.56 1.2115079 Black 11 6.4 0.56 1.2115080 White 11 6.4 0.56 1.2115081 Red 16 10.4 0.56 1.2115082 Black 16 10.4 0.56 1.2115083 White 16 10.4 0.56 1.2115084 Red 20 13.5 0.69 1.2115085 Black 20 13.5 0.69 1.2115086 White 20 13.5 0.69 1.2115087 Red 31 21.2 0.77 1.2115088 Black 31 21.2 0.77 1.2115089 White 31 21.2 0.77 1.2115090 Red 39 26.1 0.87 1.2115091 Black 39 26.1 0.87 1.2115092 White 39 26.1 0.87 1.2
BLA Nominal Bundle LengthCode O/all Dia. Range mm mm m
115038 8 8-50 10115040 12 12-100 10
Quality marine equipment
Battery BoxesSturdy, black plastic boxes to suit most common marine batteries. Supplied complete with webbing strap and tie down brackets. Moulded carry handles. Reinforced bottom contains battery acid. Lid facilitates side and end entry of battery leads. Eight gauge mount screws supplied.
Battery Box With Master SwitchSturdy black plastic battery boxes fitted with BEP 701 mini battery master switch, 500 mm length of 200 amp tinned wiring and marine quality battery terminals.
Power Battery BoxImpact resistant case with a heavy duty handle and strap making the battery portable. Additional hardware supplied enables the box to be mounted securely to flat surfaces. Indicator measures battery condition at the press of a button. Two cigarette lighter type power sockets are mounted externally and prewired internally with a 10 amp fuse. Heavy duty external terminals with insulated wing nuts are pre wired internally via a 30 amp fuse to connect directly to battery. Maximum battery dimensions: 330(l) x 185(w) x 210(h) mm.
Battery Trays - Heavy DutyManufactured from injection moulded plastic. Heavy duty base has four recessed 6mm screw holes. Upper frame is secured to base via nylon bolts.
Battery TrayHeavy duty moulded high density polyethylene tray, top bracket and support bolts. The tray provides protection to the hull and contains minor acid spills. Maximum overall height is 270mm. Suits battery heights 170-225mm. 6mm roundhead mount screws.
Battery Tie DownWhite, polypropylene battery clamp down set. Nylon bolts and wing nuts will not rust or corrode. Impervious to battery acid. Maximum battery height 200mm and minimum height 155mm, maximum width 170mm. 4mm countersunk mount screws.
Battery Tie DownStainless steel battery tie down set. Pressed stainless steel angled base mounts. 6mm diameter uprights with hex nuts and cross bar to secure battery.
115103 Replacement strap 35x1020mm115104 Replacement strap 35x1400mm
BLA Inside Inside Inside Outside MountCode Length Width Height Height Screws mm mm mm mm mm
115105 265 180 210 272 4 c/s115106 325 180 210 272 4 c/s
BLA DescriptionCode
115108 Power Battery Box115109 60A & 10A CCT Breakers
BLA Length WidthCode Internal Internal mm mm
115118 280 175115119 320 175
BLA Code
115120
BLA Battery Battery MountCode Width Height Holes mm mm mm
115122 165-187 170-227 5 c/s
BLA O/all Max. Battery Max. Battery Min. BatteryCode Base Height Height mm mm mm mm 115114 323x189 260x170 210 165115116 362x189 300x165 210 165
BLA Inside Inside Inside Outside MountCode Length Width Height Height Screws mm mm mm mm mm 115100 265 180 210 272 4 c/s115101 390 180 195 260 4 c/s115102 325 180 210 272 4 c/s
section
11
118
ELE
CT
RIC
AL
www.bla.com.au
section
11
119
ELE
CT
RIC
AL
Wiring Harnesses - Pre Fabricated and Custom - All A.B.Y.C Compliant
BLA manufacture a range of professionally designed and packaged DC wiring harnesses compliant to internationally recognised A.B.Y.C. standards. By utilising the most up to date CAD software, BLA’s fully trained and qualified technicians create the harnesses producing concise illustrated electrical schematics detailing all specific dimensional requirements. By using only the highest quality marine grade tinned copper wire, our electrical DC harnesses are manfactured to the highest standards and are being installed by some of Australia's leading OEM's.
Wiring Harnesses - Pre Fabricated to suit 4ml to 6.5m
Complete wiring harnesses to suit vessels up to 6.5 metres. Harnesses are fully sleeved for protection, supplied with all terminations for cable ends, colour coded and manufactured from tinned copper wire. All harnesses include an in-line fuse holder in the positive line feed from the battery.
BLA SuitsCode
113720 4.0 - 4.5 metre runabout113722 4.5 - 5.5 metre half cabin113726 6.0 - 6.5 metre cabin cruiser
Wiring Harness 4-4.5 metre runabout
• Complete harness to suit 4.0-4.5m runabout
• Quality BEP fused 4 gang switch panel
• Colour coded, tinned copper wire
• Fully sleeved for chafe protection
• Includes terminal pack and nameplates
Wiring Harness 4.5-5.5 metre runabout
• Complete harness to suit 4.5-5.5m half cabin
• Quality BEP fused 4 gang switch panel
• Colour coded, tinned copper wire
• Fully sleeved for chafe protection
• Includes terminal pack and nameplates
Wiring Harness 6.0-6.5 metre runabout
• Complete harness to suit 6.0-6.5m half cabin
• Quality BEP fused 6 gang switch panel
• Colour coded, tinned copper wire
• Fully sleeved for chafe protection
• Includes terminal pack and nameplates
Take Offs:•PortandStarboardnavigationlights•Sternpolelight•Fuelsender•Bilgepump•Positiveandnegativestudsforextraaccessories
Take Offs:•PortandStarboardnavigationlights•Sternpolelight•Fuelsender•Bilgepump•Cabinlight•Positiveandnegativestudsforextraaccessories
Take Offs:•PortandStarboardnavigationlights•Sternpolelight•Fuelsender•Bilgepump•Cabinlight•Spotlight•Cockpitlight•Cabinlight•Positiveandnegativestudsforextraaccessories
FS
S IF
TBFG
Sn
Pn a
B
MFSwitchpanel
Anchor light
Main fuse 30 AMP
Fuel sender
Fuel gauge
Terminal block
Starboard navigation
Port navigation
Bilge pump
Negative ring terminal
Positive Ring terminal
aB
MF
FS
S IF
Switchpanel
Anchor light
Main fuse 30 AMP
Fuel sender
FGFuel gauge
TB
Terminal block
SnStarboard navigation
CaBCabin light
CPLCockpit light
aCCAccessory
PnPort navigation
Bilge pump
Negative ring terminal
Positive Ring terminal
AB
MF
FS
S IF
Switchpanel
Anchor light
Main fuse30 AMP
Fuel sender
FGFuel gauge
TB
Terminal block
SNStarboard navigation
CL
CL
Cockpit or cabin lights
PNPort navigation
Bilge pump
Negative ring terminal
Positive Ring terminal
Quality marine equipment
Single Core WireFor general purpose low voltage applications. V90 PVC insulation to AS3808: 1998, plain copper wire conductor. Supplied in 30 metre coils.
Single Core Wire - Tinned
Marine quality single core low voltage wire. V90 PVC insulation to AS3808: 1998, tin coated copper wire conductor. Supplied in 50 and 100 metre coils.
Twin Core Wire - Tinned
Marine quality, twin core, low voltage wire. V90 PVC insulation to AS3808: 1998, tin coated copper wire conductor. Supplied in 50 and 100 metre coils - red/black insulation.
Twin Core WireFigure 8 twin core general purpose low voltage wiring. V90 PVC insulation to AS3808: 1998, plain copper wire conductor. Supplied in 30 and 100 metre coils. Red/black insulation.
Twin Core Twin Sheathed WireA general purpose two core low voltage wire with external sheath for extra protection in vulnerable applications. V90 PVC insulation and sheath to AS3808: 1998, plain copper wire conductor. Supplied in 30 and 100 metre coils. Red/black core, black outer sheath.
Speaker WireHigh quality audio figure 8 twin core wire. V90 PVC insulation to AS3808: 1998, plain copper wire conductor. Supplied in 100 metre coils.
BLA Auto Nominal Rating Strand Nominal InsulationCode Area @ 30ºC O/D Colour mm mm2 amp #/mm mm
115840 3 1.13 20 16/0.30 2.4 Red115841 3 1.13 20 16/0.30 2.4 Black115844 4 1.84 28 26/0.30 2.7 Red115845 4 1.84 28 26/0.30 2.7 Black115852 6 4.59 51 65/0.30 4.0 Red115853 6 4.59 51 65/0.30 4.0 Black
BLA Nominal Rating Strand NominalCode Area @ 30ºC Size mm2 amp #/mm mm
115920 0.40 2.5 14/0.20 1.8x3.8
BLA Auto Nominal Rating Strand NominalCode Area @ 30ºC O/D30m 100m mm mm2 amp #/mm mm
115900 115901 3 1.13 16 16/0.30 3.4x6.8115902 115903 4 1.84 22 26/0.30 3.9x6.6115904 115905 5 2.90 29 41/0.30 4.6x8.0115906 115907 6 4.59 40 65/0.30 5.5x9.3115908 115909 8 7.92 74 112/0.30 8.0x13.4
BLA Auto Nominal Rating Strand NominalCode Area @ 30ºC O/D 30m 100m mm mm2 amp #/mm mm
115890 115891 3 1.13 16 16/0.30 2.5x5.2115892 115893 4 1.84 22 26/0.30 2.8x5.9
BLA Auto Nominal Rating Strand NominalCode Area @ 30ºC O/D 50m 100m mm mm2 amp #/mm mm
115870 115871 3 1.13 16 16/0.30 2.5x5.2115872 115873 4 1.84 22 26/0.30 2.8x5.9
BLA Auto Nominal Rating Strand Nominal InsulationCode Area @ 30ºC O/D Colour50m 100m mm mm2 amp #/mm mm
115860 115862 4 1.84 28 26/0.30 2.9 Red115861 115863 4 1.84 28 26/0.30 2.9 Black115864 115866 6 4.59 51 65/0.30 4.2 Red115865 115867 6 4.59 51 65/0.30 4.2 Black
section
11
120
ELE
CT
RIC
AL
www.bla.com.au
section
11
121
ELE
CT
RIC
AL
Twin Core Twisted Shielded WireThe ideal wire for wiring electronic instruments such as sounders, radios, stereos, etc. Also suitable for fuel and water gauge senders, sensitive electronics and data communication. Twisted aluminium/polyester laminate tape screen with a 7/0.20mm tinned copper drain wire to minimise stray RF interference and inductive potentials. Conducting wires are tin coated copper with V90 PVC installation. Grey external sheath to AS3808: 1998 for additional protection. Supplied in 100m rolls.
Twin Core Twin Sheathed Wire - Tinned
Marine quality, twin core low voltage wiring with external sheath for extra protection in vulnerable applications. V90 PVC insulation and sheath to AS3808: 1998, tin coated copper wire conductor. Supplied in 50 and 100 metre coils. Red/black core with white outer sheath.
Triple Core Twin Sheathed Wire - Tinned
Marine quality, triple core low voltage wiring with external sheath for extra protection in vulnerable applications. V90 PVC insulation and sheath to AS3808: 1998, tin coated copper wire conductor. Supplied in 50 and 100 metre coils. Brown/yellow/white core with white outer sheath.
Battery CableSingle core, high amp, low voltage, battery, starter, winch motor wire. V90 PVC insulation to AS3808: 1998, plain copper wire conductor. Supplied in 30 metre coils.
Battery Cable - Tinned
Marine quality, single core high amp, low voltage cable commonly used in battery, starter, winch motor and other high load applications. V90 PVC insulation to AS3808:1998, tin coated copper wire conductor. Supplied in 50 metre coils.
BLA Near Nominal Rating Strand Nominal ColourCode Size Area @ 30ºC O/D (B&S) (AWG) mm2 amp #/mm mm
115930 8 7.92 74 112/0.30 5.4 Red115931 8 7.92 74 112/0.30 5.4 Black115934 6 13.36 103 189/0.30 6.9 Red115935 6 13.36 103 189/0.30 6.9 Black115938 4 20.25 135 287/0.30 8.0 Red115939 4 20.25 135 287/0.30 8.0 Black115942 3 25.70 170 364/0.30 9.8 Red115943 3 25.70 170 364/0.30 9.8 Black115946 2 32.15 190 455/0.30 10.7 Red115947 2 32.15 190 455/0.30 10.7 Black115948 1 39.55 210 560/0.30 11.5 Red115949 1 39.55 210 560.0.30 11.5 Black115950 0 49.45 246 700/0.30 12.5 Red115951 0 49.45 246 700/0.30 12.5 Black
BLA Nominal Resist Stand NominalCode Area @ 20ºC Size mm2 ohm/km #/mm mm
115914 0.34 55.9 7/0.25 4.6
BLA Auto Nominal Rating Strand NominalCode Area @ 30ºC O/D 50m 100m 500m mm mm2 amp #/mm mm
115916 115917 115926 3 1.13 16 16/0.30 3.5x5.9115922 115923 4 1.84 22 26/0.30 3.9x6.7115924 115925 6 4.59 40 65/0.30 5.5x9.5
BLA Auto Nominal Rating Strand NominalCode Area @ 30ºC O/D 50m 100m 500m mm mm2 amp #/mm mm
115928 115929 115927 4 1.84 19 26/0.30 6.8
BLA Near Nominal Rating Strand Nominal ColourCode Size Area @ 30ºC O/D (B&S) (AWG) mm2 amp #/mm mm
115960 8 7.92 74 112/0.30 5.4 Red115961 8 7.92 74 112/0.30 5.4 Black115966 2 32.15 190 455/0.30 10.7 Red115967 2 32.15 190 455/0.30 10.7 Black
Quality marine equipment
Battery TerminalsBattery terminals in either lead or brass, specifically for the marine environment. Equipped with wing nut terminals for easy disconnection for safety when the boat is stored or unattended. Positive studs are 10mm diameter, negative studs 8mm diameter. The five pack sets tear off at perforations for individual sale.
Crimp Battery LugsFabricated in one piece from the finest electrical quality copper then electro-tinned for optimum electrical performance. Suited for most marine applications. Sold in bags of ten.
Waterproof Pre-insulated Joiners Unique range of sealed, waterproof crimp terminals are the perfect solution for single wire terminations in corrosive or marine environments. The tin plated copper terminals feature a tough, heat shrinkable, adhesive lined, colour coded insulation. After completion of the standard crimping process, the terminal insulation is then heated with a heat gun or small gas torch. Within seconds, the terminal insulation then shrinks and the internal adhesive sealant melts and flows to provide a permanent seal and bond to the wire insulation.
Pre-Insulated Fork Terminals
Pre-Insulated Ring Terminals
BLA Material Polarity PackCode Qty
115144 Brass Pos/neg 1 pr115146 Lead Pos/neg 1 pr
BLA Colour Wire Size Length PkCode mm2 mm
115294 Red 0.5-1.5 36 25115296 Blue 1.5-2.5 36 25115298 Yellow 2.5-6.0 42 25
BLA Colour Wire Length StudCode Size Size10 Pack 100 Pack mm2 mm mm
115302 115303 Red 0.5-1.5 18 3.2115306 115307 Red 0.5-1.5 20 4.2115310 115311 Red 0.5-1.5 21 5.3115314 115315 Red 0.5-1.5 27 6.4 115319 Red 0.5-1.5 29 8.5 115327 Blue 1.5-2.5 19 3.2115330 115331 Blue 1.5-2.5 22 4.2115334 115335 Blue 1.5-2.5 22 5.3115338 115339 Blue 1.5-2.5 27 6.4115342 115343 Blue 1.5-2.5 29 8.5 115347 Blue 1.5-2.5 33 10.5 115355 Yellow 2.5-6.0 23 4.2115358 115359 Yellow 2.5-6.0 26 5.3115362 115363 Yellow 2.5-6.0 29 6.4115364 115365 Yellow 2.5-6.0 34 8.3115366 115367 Yellow 2.5-6.0 39 10.5
BLA Size Stud Cable a b cCode Size Size mm mm2 mm mm mm
115202 8-6 6 6.6-10.5 24 12 4.5115204 8-8 8 6.6-10.5 30 15 4.5115206 8-10 10 6.6-10.5 30 15 4.5115208 8-12 12 6.6-10.5 41 22 4.5115212 14-8 8 10.5-16.7 33 16 5.8115214 14-10 10 10.5-16.7 33 16 5.8115220 22-8 8 16.7-27.0 34 16 7.7115222 22-10 10 16.7-27.0 34 16 7.7115228 38-8 8 27-42 43 16 13.3115230 38-10 10 27-42 43 22 13.3115232 38-12 12 27-42 43 22 13.3115236 60-10 10 42-66 50 22 15.4115238 60-12 12 42-66 50 22 15.4
BLA Colour Wire Length StudCode Size Size10 Pack 100 Pack mm2 mm mm
115374 Red 0.5-1.5 21 3.2115390 115391 Blue 1.5-2.5 22 4.2115406 Yellow 2.5-6.0 25 5.3
b
a
c
115144
115146
section
11
122
ELE
CT
RIC
AL
www.bla.com.au
section
11
123
ELE
CT
RIC
AL
Pre-Insulated Joiners Pre-insulated External Spade Terminals
Fully Insulated External Spade Terminals Transparent External Spade Terminals
Pre-insulated Internal Spade Terminals Pre-insulated Piggy Back Terminals
Pre-insulated External Bullet TerminalsPre-insulated Internal Bullet Terminals
BLA Colour Wire LengthCode Size 10 Pack 100 Pack mm2 mm
115430 115431 Red 0.5-1.5 25115434 115435 Blue 1.5-2.5 25115438 115439 Yellow 2.5-6.0 27
BLA Colour Wire Length Tab Code Size Width100 Pack mm2 mm mm
115471 Red 0.5-1.5 22 6.3115475 Blue 1.5-2.5 22 6.3115479 Yellow 2.5-6.0 25 6.3
BLA Colour Wire Length Tab Code Size Width10 Pack 100 Pack mm2 mm mm
115492 115493 Red 0.5-1.5 22 6.3115496 115497 Blue 1.5-2.5 22 6.3
BLA Colour Wire Length Bullet Code Size Dia.10 Pack 100 Pack mm2 mm mm
115528 115529 Red 0.5-1.5 22 4115532 115533 Blue 1.5-2.5 22 4 115537 Yellow 2.5-6.0 24 5
BLA Colour Wire Length Bullet Code Size Dia.10 Pack 100 Pack mm2 mm mm
115540 115541 Red 0.5-1.5 23 4115544 115545 Blue 1.5-2.5 23 4 115549 Yellow 2.5-6.0 25 5
BLA Colour Wire Length Tab Code Size Width10 Pack 100 Pack mm2 mm mm
115517 Red 0.5-1.5 23 6.3115520 115521 Blue 1.5-2.5 23 6.3
BLA Colour Wire Length Tab Code Size Width10 Pack 100 Pack mm2 mm mm
115480 115481 Red 0.5-1.5 22 6.3115484 115485 Blue 1.5-2.5 22 6.3
BLA Colour Wire Length Tab Code Size Width10 Pack 100 Pack mm2 mm mm
115446 115447 Red 0.5-1.5 21 6.3115450 115451 Blue 1.5-2.5 21 6.3115454 115455 Yellow 2.5-6.0 23 6.3
Quality marine equipment
Terminal Blocks With CoversBrass terminal block on insulated base with transparent cover, colour coded for positive or negative connections. Cover is retained by a single screw. Terminals accept wire up to 5mm2.
Crimping Tool Set3 in 1 electrical tool. Comfortable hand grips provide ample leverage for electrical wire cutting, stripping and crimping. Length 237 mm. Suits wire up to 5.0mm2. Complete set including 100 assorted terminals. Case dimensions 250 (w) x 110 (d) x 26 (h) mm.
Soldering Iron12 volt, 30 watt, wired with cigarette lighter type plug.
Wire TapsSimple power connection splice. No cutting or stripping of wire or insulation required. Plated contact, moulded housing with snap close tab. Sold in packs of 100.
Screw Connector Strips12 pole screw connector strip. Each pair of terminals is insulated from the next.
Quick Connect Power Plug
Clip Electrical ConnectorsPolarised, catch type connection. These connectors have a white moulded housing that protects the tin plated crimp contacts. Sold individually. Each connector includes housings and contacts.
BLA Code
115590
BLA Colour Wire Length Width HeightCode Size Closed mm2 mm mm mm
115600 Black 0.5-2.5 18 16 10115602 Yellow 1.5-5.0 21 18 13
BLA Wire Length Width HeightCode Size mm2 mm mm mm
115620 1.5-2.5 94 18 13115622 4-6 119 20 14
BLA Poles Length Length WireCode Plug Socket Size mm mm mm
115632 2 25 28 0.8-3
BLA Max. LengthCode O/all amps mm
115626 25 500
BLA Length CableCode Length mm m
115598 200 3.5
BLA Cover Terminals Base HeightCode Colour No.of Size mm mm
115616 Red 6 65x46 43115617 Black 6 65x46 43115618 Red 12 86x57 40115619 Black 12 86x57 40
Weatherproof Sealed ConnectorsWeatherproof connectors made for harsh environments. Rated to 20 amps DC, the black moulded housing incorporates a positive locking latch. Each connector includes housing, seals and contacts to suit 2mm2 wire. Sold in pairs (2 x A + 2 x B).
BLA Circuits Length Length Width DepthCode A B mm mm mm mm
115651 1 40 45 15 21115652 2 40 45 23 21115653 3 40 45 32 21115654 4 40 45 38 21
(A)(B)
115600
115602
115616
115619
115622
Heavy duty, two pin in line flat connector with short 5mm2 cables fitted with bullet terminals one end and eye terminals the other. Moulded nylon body with tinned copper contacts. Two parts are polarity conscious.
section
11
124
ELE
CT
RIC
AL
www.bla.com.au
section
11
125
ELE
CT
RIC
AL
Contour Heavy Duty ANL Fuse and HolderHeavy duty ANL fuses mounted in contour housing with removable sides. Modular sizing and lock mouldings facilitate easy grouping. Meets ABYC standards for exposed terminals. Fuses and holder also sold separately. Available in sizes from 80 to 425 amps. Dimensions: 138 x 69 x 50 (h) mm. 5mm roundhead mount screws.
Contour Heavy Duty Blade Fuse HolderAn economical way of fusing heavy loads from 30 to 80 amps, ideal for battery charger output, main DC supply etc. Fuse is clamped between tinned brass plates for positive connection. Designed to match all other Contour power distribution products with modular sizing and lock mouldings to facilitate easy grouping. Meets ABYC standards for exposed terminals. Studs are 6mm (1/4”). Fuses are sold individually (refer below).
Heavy Duty Blade Fuse and HolderIn-line heavy duty fuse holder for installations where space is limited. Supplied with 8mm2 wire tails. Fuses are sold separately. Fuse holder is 80 (l) x 55 (h) x 15 (w) mm.
113569 Fuse holder only
BLA Fuses Base HeightCode Size mm mm
113622 Single 69x69 50113624 Dual 138x69 50
BLA Fuse OnlyCode amp
113626 30113627 40113628 50113629 60113630 70113631 80113621 Fuse holder only
BLA Amp ReplacementCode Fuse
113568 80 113608113570 100 113610113572 150 113612113574 200 113614113576 250 113616113578 300 113618113580 425 113620
ATC Fuse HolderThe BEP ATC fuse holder includes a patented contour lock system (as used in the battery management products) which allows linking of as many fuse holders as desired. Pairs may also be electrically linked by using the solid link included with each pack. Comes with 22 most common white on black labels. Specifications:Number of circuits: 6Number of spares: 2Maximum amperage per circuit: 30 ampsMaximum amperage per block: 100 ampsMaximum voltage: 32 voltsBase material: PolycarbonateCover material: Clear polycarbonate
BLA Description Width Length HeightCode mm mm mm 113632 Screw 90 80 42113633 Spade 90 80 42
113568
113632
113624
113622
Quality marine equipment
BLA Code
115716
BLA Code
115718
Waterproof In-Line Blade Fuse HolderHeavy duty waterproof blade fuse holder with mounting cap that clips together and accepts single standard blade type fuses to 25 amps. Sold in packs of 5.
Stackable Blade Fuse HolderThese blade fuse holders accept up to four fuses and can be clipped together to provide for multiple circuits. Mounting holes provided at each end.
FusesStandard 3AG glass style fuse. Length 32mm, diameter 6.6mm. Sold in packs of 10.
Waterproof Fuse Holder - 3AG
Black nylon, push close, waterproof in-line fuse holder. 65 x 27 x 14 mm. Supplied with 200mm of 2mm2 wire and 2 x ten amp 3AG fuses - one active and one spare. Sold individually.
Fuse Holder - 3AG
White nylon, snap close, in-line type fuse holder to accept 3AG fuses. Rated for up to 20 amp fuses. Brass terminals crimp directly to the fuse. Length 60mm. Maximum width 18mm. Sold in packs of 10.
Waterproof Fuse Holder - Blade
In-line waterproof fuse holder. Accepts standard AF blade fuse. Supplied with 230mm of 2.5mm2 wire.
Fuses - Blade
Automotive style, AF blade fuse. 19 x 19 x 4mm. Sold in packs of 10.
Cable 'P' ClampsBlack nylon 'P' clamps. Provides simple, single fastening and clamping of wiring harnesses and looms.
BLA Code
115690
BLA Code
115704
BLA Reference AmpCode
115740 3AG1 1115742 3AG2 2115744 3AG3 3115746 3AG5 5115748 3AG7.5 7.5115750 3AG10 10115752 3AG15 15115754 3AG20 20115756 3AG25 25115758 3AG30 30
115712 Fuse Holder Blade pack of 5
BLA Wire Length Width Mount BagCode Bundle Holes Qty mm ø mm mm mm
115810 3 20 10 4 r/h 25115812 5 20 10 4 r/h 25115814 6 22 10 4 r/h 25115816 8 22 10 4 r/h 25115818 10 24 12 4 r/h 25115820 13 31 12 4 r/h 10115826 25 44 12 4 r/h 10
BLA Reference Amp ColourCode
115780 AF3 3 Violet115784 AF5 5 Tan115786 AF7.5 7.5 Brown115788 AF10 10 Red115790 AF15 15 Blue115792 AF20 20 Yellow115794 AF25 25 Clear115796 AF30 30 Green
BLA Code
115714
Mini ATM Blade FusesMini ATM fuses feature enclosed elements for protection against shocks and sparks. Suits BEP CMP range. ATM fuses use the same universal color coding as ATC style. Sold in packs of 10.
BLA AmpCode
115762 3115764 5115766 7.5115768 10115770 15115772 20115774 25115776 30
115780
115810
115776
section
11
126
ELE
CT
RIC
AL
www.bla.com.au
section
11
127
ELE
CT
RIC
AL
Premium Electric Trumpet HornsHigh quality, 100% stainless steel exterior with 304 grade stainless steel diaphragm. Five year warranty. Single horn rating 118 dB @ 1m. Dual horn rating 123 dB @ 1m. Maximum current draw 10 amps, 12 volt.
Compact HornElectric horn with stainless steel cover. Black plastic base. 12 volt.
Compact Hidden Electric HornExternally flush mounted, 12 volt concealed horn with white ABS plastic housing and grill. Stylish mylar lined grill makes the installation totally waterproof, whilst allowing maximum sound transfer (111dB @ 1m). Maximum current draw 4 amps. Black grill available separately.
Electric Trumpet HornsAll stainless steel housing, trumpet and mount brackets. Approximately 110 dB. 12 volt. Rubber insulating pads are included for the base of the mounts.
Wiper Motor - Waterproof
Waterproof wiper motor. White UV stabilised plastic motor housing. 110º sweep angle. Self parking. 12 volt. Blade and arm sold individually.
Standard WiperSweep angle 110º, self parking motor with stainless steel cover. 12 volt. Complete with adjustable stainless steel arm and 280mm blade. Arm length 200mm - 305mm. Replacement blades and arms are available as listed.
BLA O/all Width Height MountCode Length Screws mm mm mm mm
116030 94 84 55 6 r/h
116044 Adjustable 200-305mm arm only116046 280mm wiper blade only116048 356mm wiper black only
BLA Motor Motor Motor O/all MountCode Width Height Length Length Shaft mm mm mm mm mm
116040 107 71 88 170 46x12.7
BLA Trumpet Length Height Width MountCode Screws mm mm mm mm
116034 Single 405 130 101 5 r/h116036 Double 465 130 185 5 r/h
BLA Face Cut Out MountCode Size Dia. Screws mm mm mm
116032 135x85 70 4 r/h
116044 Adjustable 200-305mm arm only116046 280mm wiper blade only116048 356mm wiper blade only
BLA Motor Motor Motor O/all MountCode Width Height Length Length Shaft mm mm mm mm mm
116042 102 57 85 141 30x9
BLA Trumpet Length Height Width MountCode Screws mm mm mm mm
116024 Single 410 102 114 5 r/h116026 Double 460 122 200 5 r/h
116033 Black grill only
116024
116026
116044
116048
116044
116034
116036
116048
116040
Quality marine equipment
AFI 1000 Waterproof Wiper MotorsThe 12 volt single speed motor is protected by a fully sealed waterproof housing, constructed of UV stabilized high temperature, high impact thermoplastic.
Features:•Adjustablerightorleftselfparking•Factorypresetsweepof110degrees,canbeadjustedto50,65,or80degrees•Powersupto460mm(18”)Deluxearmand460mm(18”)Deluxebladecombinationatsweepsetsof80°orless•Powersupto405mm(16”)Deluxearmand405mm(16”)Deluxebladecombinationsatasweepsetof110°orless•12voltheavydutymotorwithanti-rotationknurleddriveshaftandsolidbrassarmdrivenut•Coasttoparkwithadjustablerightorleftselfparking•RFshieldedcircuitry•Stalltorque:63kgf/cm;6.2Nm(55in-lbs)•Stallcurrent:9.8-10.0amps•Noloadcurrent:0.8-1.2amps•3yearwarranty
BLA Volts Motor Motor Motor Thread O/allCode Length Depth Width Dia. Shaft Lengh mm mm mm mm mm
116080 12 168.4 50.8 83.8 28x16 42116082 12 168.4 50.8 83.8 53x16 63
BLA Volts Motor Motor Motor Thread O/allCode Length Depth Width Dia. Shaft Lengh mm mm mm mm mm
116088 12 197 70.28 101 50x16 65116090 24 197 70.28 101 50x16 65
AFI 1.5 Waterproof Wiper MotorsFully sealed powder coated aluminium waterproof base and housing, powers up to 550mm (22") Deluxe arm/blade combination or 500mm (20") Premier arm/blade combination.
Features:•Chromeplatedsolidbrassknurleddrivenutwithbrassandstainlesssteeldriveshaft•Factorypresetsweepanglesof110°,witheasyadjustmentto45°,60°or80°•Coasttoparkwithadjustablerightorleftselfparking•16mmdiametershaft(5/8”)•Twospeedmotor•Sealed150mm,16AWGwireleads,withRFshieldedcircuitry•Stalltorque:125kgf/cm;12.3Nm(109in-lbs)•Stallcurrent:11.5-13.0amps•Noloadcurrent:0.5-1.2amps•Availablein23mm(12vonly)and50mmeffectiveshaftlengths•3yearwarranty
Premier Wet Wiper ArmsAFI Premier wet wiper arms feature heavy duty construction from quality materials along with a built-in wet delivery system that allows for an easily installed washer system to keep your windshield clean. The Premier wet arm features black PVC hose that runs up the centre of the arm and ends in a four nozzle spray fixture that is an integral part of the wiper arm itself. Each solid brass spray nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield. Premier wet arms can tie into an existing pressurized water system, or can be used with the deck washer kit 116174 on the next page.
Features:•Stainlesssteelandheavydutycomponentdesign•“Articulating/Bend-Back”designthatlocksarminuprightpositionforwindshieldcleaning•Motorshaftmountwithnotched“teeth”andsetscrewforsecureinstallationandoperation•Availableinstandardandpantographicstyles•Thestrengthtodrivelargerwiperblades
116168
116162
BLA Description LengthCode mm
116162 Standard arm 380-500116164 Standard arm 500-635116168 Pantograph arm 435-650116170 Pantograph arm 550-660
116082
116088
section
11
128
ELE
CT
RIC
AL
www.bla.com.au
section
11
129
ELE
CT
RIC
AL
BLA Code
116174
BLA Code
116178
AFI Below Deck Windshield Washer KitSupplied complete with water bottle and 12 volt pump motor, mount, 4.8 meters of clear hose, under deck ‘T’ piece, through hull fittings and hardware. Can be hooked up directly to AFI Premier wet wiper arms.
Intelligent Wiper SwitchThe new AFI microcontroller based intelligent switch operates all necessary wiper motor functions at the touch of a button. Settings for two continuous speed functions and three intermittent speed functions (2, 4 and 8 second delays) and washer system function. Blinking LED function lights. Suitable for both 12 and 24 volt motors. Connectors included.
Wiper Motor - Heavy Duty
Heavy duty, self parking two speed wiper with adjustable sweep angle of 80º to 120º. Black finish with stainless steel and brass exposed shaft. Mounting bracket is stainless steel. The range of blades and arms are listed below. Sold individually.
Wiper Motor - Heavy Duty Covered
Heavy duty, self parking two speed wiper with 110º sweep angle. Motor is shrouded by a white plastic cover. Exposed shaft is brass with stainless steel spline drive. Suitable for use with the blades and arms below. Sold individually.
BLA Volts O/all Height O/all Motor MountCode Length Depth Depth Shaft mm mm mm mm mm
116060 12 200 101 118 54 16x42116062 24 200 101 118 54 16x42
BLA Volts O/all Height O/all Motor MountCode Length Depth Depth Shaft mm mm mm mm mm
116061 12 218 112 133 67 16x42116063 24 218 112 133 67 16x42
116061
AFI 2.5 Waterproof Wiper MotorsFully sealed powder coated aluminium waterproof base and housing, powers up to 550mm (22") Deluxe arm/blade combination or 500mm (20") Premier arm/blade combination. Fully sealed powder coated aluminium waterproof base and housing, powers up to 660mm (26") Deluxe arm/blade combination or 610mm (24") Premier arm/blade combination. Features:• Chrome plated solid brass knurled drive nut with brass and stainless steel drive shaft• Factorypre-setsweepanglesof110°,witheasyadjustmentto45°,60°or80°• Two speed motor available in 12V and 24V models• Coast to park with adjustable right or left self parking• Sealed 150mm 16AWG wire leads, with RF shielded circuitry• Stall torque: 160 kgf/cm; 15.7 Nm (139 in - lbs)• Stall current: 9.0 - 10.5 amps• No load current: 1.0 – 1.6 amps• 3 year warranty
BLA Volts Motor Motor Motor Thread O/allCode Length Depth Width Dia. Shaft Lengh mm mm mm mm mm
116096 12 201 76.8 108 250x16 65116098 24 201 76.8 108 50x16 65
Quality marine equipment
Wiper Arms - Heavy Duty
Choice of straight, articulated or pantographic wiper arms for use with the heavy duty wiper motors above and opposite. The pantographic arm produces a straight wipe across the screen.
Wiper Blades - Heavy Duty Curved
Choice of stainless steel or black polymer framed wiper blades to suit the range of heavy duty wiper arms opposite.
Wiper Blades - Heavy Duty Straight
Choice of two lengths for use with any of the heavy duty wiper arms listed above.
12 volt Hair DryerCompact design with folding handle. Cigarette plug power supply with two metre lead.
(A)
(C)
(B)
BLA DescriptionCode
(A) 116064 Stainless steel wiper arm, 270 - 340mm(B) 116074 Articulated stainless steel wiper arm 320 - 400mm(B) 116114 Articulated stainless steel wiper arm 350 - 490mm(C) 116116 Pantograph action, s/steel, wiper arm 310-435mm(C) 116118 Pantograph action, s/steel, wiper arm 435 - 550mm
BLA DescriptionCode
116070 280mm stainless steel116072 356mm stainless steel
BLA DescriptionCode
(A) 116124 405mm stainless steel curved wiper blade(B) 116127 305mm black polymer frame curved blade(B) 116128 405mm black polymer frame curved blade(B) 116130 460mm black polymer frame curved blade
BLA Code
116998
BLA Code
116992
(A)
(B)
N.B. Curved blades also suit flat screens
Canister vacuum Cleaner - Wet/dry
•12voltcigaretteplugpowersupplywith2.7mlead•Suppliedwith1metresuctionhose,twocreviceattachments
and brush•Internalhoseandattachmentstorage•Inflatingcapabilitywithadaptor•3.8litredirtstoragebin•On/offswitchonunit• 120wattmotor
Deluxe Curved Wiper Blade All AFI Deluxe wiper blade frames are constructed using stainless steel materials. High quality silicone rubber compounds provide maximum durability and smooth wiping motion. Work efficiently on both curved and flat windshields.
Premier Curved Wiper BladesPremier wiper blade frames are constructed using stainless steel materials and are fitted with marine grade silicone squeegee to providesmoothandefficientoperation.Extrasqueegee“claws”spread pressure evenly over the length of the blade, allow the blade to conform more easily to a curved windshield.
BLA LengthCode mm
116138 500
BLA LengthCode mm
116148 500116150 550116152 610
116150
section
11
130
ELE
CT
RIC
AL
www.bla.com.au
section
11
131
ELE
CT
RIC
AL
M-Tech MT-500 Marine vHF RadioDesigned for operation in the marine VHF FM frequency band range, between 156 and 162MHz, which includes all currently allocated international channels. The MT-500 has Digital Selective Calling (DSC) capabilities when connected to a compatible GPS receiver with ‘distress’, ‘all ships’,‘individual’ and group DSC call formats supported. There are 32 memories for storing incoming DSC calls and 32 for your personal DSC call directory. Other features include position send/request, all channel scanning, priority channel scanning, memory channel scanning, one button instant access to channel 16 and an alphanumeric keypad on the microphone.Thelarge,easytouse“SELECT/ENTER”knobiseasilyrotatedandpushedforsimpleoperation,channelandmenuselection. The easy-to-read, four line LCD displays current operating status, menus for selecting functions and settings for optional features. The microphone has a keypad for changing channels and selecting functions. In keeping with its intended use in the harsh marine environment the MT-500 is water ingress protected to submersion standard JIS-7.
Features:• Large LCD four line display with 11 characters each• Latitude and Longitude position indication when connected to compatible GPS receiver• Three scanning modes for Priority, All and Memory scan• Distress DSC button with protective cover• One button instant access to channel 16• Microphone with alphanumeric backlit keys• External speaker connection provided on rear panel• Three different alarm tone sequences• Comprehensive instruction manual• C-Tick and CE approved
Specifications:TranSMITTer:Output power: 25 watts or 1 watt switchableTx current: 6 amps @ 25 watt Tx. I amp @ 1 watt TxModulation: G3E for Voice. G3B for DSCTransmit frequencies: 156.025Mhz – 157.425Mhz @ 25Khz spacingModulation distortion: Less than 4% @ 1Khz for +/-3Khz deviationModulation limiter: +/- 5Khz deviation with 100% modulation reCeIVer:Receive frequencies: 156.300Mhz – 162.000Mhz @ 25Khz spacingSensitivity: 0.5μV or less for 20db SINADSquelch range: 0.25μV to 0.80μV @ full squelchAudio output power: 3.0 watt minimum @ 4 ohms
with less than 10% distortionReceiver acceptance: +/- 7KHz minimumAdjacent channel selectivity: Less than -70db for +/-25KhzImage rejection: Less than -70db
BLA Code
118200
Weatherproof Stereo CoverMoulded white plastic housing with smoked grey acrylic hinged window. A short shelf at the back of the housing supports the stereo. Accepts any standard DIN mount stereo system.
BLA Face Cut Out StereoCode Size Size Cavity mm mm mm
117044 230x102 200x70 182x52
Weatherproof Stereo EnclosureFully enclosed protection from the marine environment for most 12 volt stereos. Fits 'DIN style', dual post or removable stereos. Trunion mount for deck or overhead installation. White ABS housing and trunion bracket. Smoked polycarbonate front cover with gasket seal. Integral through housing antenna socket, power and four speaker wiring harness.
BLA Height Width Depth Internal Dim.Code mm mm mm hxwxd mm
117160 130 260 260 61x190x165
Quality marine equipment
Extension SpeakerMini extension speaker for 27MHz or VHF marine radios. Features:• White plastic housing and mounting bracket• Water resistant• 4 watt output• 8 ohms impedance• 1.4 metre lead
Subcompact Box SpeakerDesigned to fit in difficult locations and still offer quality sound.Features:• Waterproof dual cone speakers• UV stabilised ABS enclosure• White powder coated stainless
steel grill and mount bracket• Low magnetic field for minimal
effect on compass• 4 ohm impedance• 40 watts peak
power each• Sold as a pair
Extension Speaker - Waterproof
Waterproof 8 watt communication speaker. White finish.Features:• Polypropylene cone• White powder coated stainless steel grill
and mount bracket• Supplied with three metre lead fitted
with 3.5mm mini plug to suit most VHF/27MHz radios
Platinum Panel SpeakersTwo way hi-power waterproof panel speakers.Features:• Waterproof - can be hosed down when cleaning the boat• Corrosion proof design for permanent outdoor mounting in a
saltwater environment• 200 watts peak power
each speaker• Off-white UV stabilised
ABS housing• Excellent sound quality• Off-white powder coated stainless
steel grill.• 125mm polypropylene woofer with
25mm mylar dome tweeter• Four metre lead per
speaker included• Sold as a pair
BLA Width Height Depth ConeCode mm mm mm mm
117130 75 73 33 62
BLA Height Width Depth ConeCode mm mm mm mm
117140 120 125 115 75
BLA Height Width Cut Out Protrusion IntrusionCode mm mm mm ø mm mm
117150 230 153 112 40 28
BLA Width Height DepthCode mm mm mm
117128 80 74 53
Twin Cone Water Proof Round SpeakersDesigned for permanent outdoor installation in a marine environment. Made from high grade, moulded white plastic with waterproof polypropylene and rubber cones. Two–way marine speaker providing ultra-crisp top end and nice tight lows. Peak power is per speaker. Features:• Waterproof• Polypropylene/rubber cones• 4 ohms impedance• Sold as a pair
BLA Face Intrusion Cut PeakCode Dia Out Power mm mm Dia. Watts
117100 132 46 93 50117102 149 54.5 112 70117104 179 63 133 110
Sunglasses Case with Built-In SpeakersTake your music anywhere with this extremely compact, portable and practical dual purpose music amplifier, sunglass and general items case. Listen to iPods®, MP3 or MP4 compatible systems through high power, distortion free, built in speakers.Easy to connect and use. Simply plug the jack into any earphone socket of iPods®, MP3, MP4, PSP®, NDS®, Walkman®, compact radios, notebooks, mobile phones and the like. Universally connects to most entertainment devices fitted with a standard 3.5mm stereo plug.
The hard case provides additional protection for iPods® and other similar devices and may be zippered shut when operational without muting the speakers.
C-Tick approved and powered by two AA batteries (included) the system provides up to 15 hours use. An internal on-off slide switch with blue LED light acknowledges power on.
Features:• Hardcasewithsoftmeshfront• Abletoconnecttoawiderangeofappliances• 2x40mmbuilt-inspeakers• Securesunglassescompartment• Additionalkeyormoneycompartment• Upto15hoursruntimeusing2xAAAlkalinebatteries• LEDpower-onindicator• 3.5mmgoldplatedstereoconnector• Notethatthisproductisnotwaterproof• Compact190(l)x95(h)x75(d)mm
BLA Code
117144N.B. Glasess and MP3 player not included.
section
11
132
ELE
CT
RIC
AL
www.bla.com.au
section
11
133
ELE
CT
RIC
AL
SeaMaster AM/FM AerialsWhite ultraglass aerials suitable for use with AM/FM radios. Supplied with a five metre lead with an automotive style radio aerial plug. A range of separately purchased bases on page 134 are available for the best possible fit to any vessel.
Alloy Boat Transceiver AerialsShort white flexible plastic whips, available to suit 27MHz and VHF marine transceivers and designed specifically to suit aluminium boats where the antenna base is earthed to the bare aluminium hull. The whip is removable from the base via a screw thread which is protected by a rubber cap. Base is 35mm diameter and 35mm high. Mounting hole 9.5mm. Supplied with a 1.9m lead.
SeaMaster Transceiver AerialsWhite ultraglass whips available to suit 27MHz, VHF and UHF marine transceivers. Five metre lead supplied with fast fit plug requiring only a 9mm cable hole and ensuring a reliable electrical connection without solder. A range of separately purchased bases on page 134 are available for the best possible fit to any vessel.
Sea Master vHF AerialsSuitable for use with all VHF marine transceivers. The ultraglass whip universal mount aerial suits all SeaMaster mount options (opposite page) and is supplied standard with a 5 metre lead and a fast fit plug, which only requires a cable hole of 9mm to be drilled. The stainless steel whip mast mount aerial requires the purchase of a suitable length cable pack listed below.
Aerial CablesMade from white, marine grade, RG-58CU cable and either fast fit plugs (for 27 MHz, UHF and VHF) or automotive style radio aerial plugs (for AM/FM). VHF mast mount cables fitted with weather-shield plug at aerial end.
BLA AM/FM AerialsCode
119060 1.8m aerial only119062 2.5m aerial only
BLA DescriptionCode
119010 27 MHz 1.8m aerial119012 27 MHz 2.5m aerial119040 VHF 1.8m aerial119042 VHF 2.5m aerial119048 UHF 1.8m aerial
1
2
5
4
3
BLA DescriptionCode
119142 5m 27MHz/UHF/VHF extension cable119144 10m 27MHz/UHF/VHF extension cable119148 5m AM/FM extension cable119160 10m VHF mast mount cable pack119162 15m VHF mast mount cable pack119164 20m VHF mast mount cable pack119166 25m VHF mast mount cable pack119168 30m VHF mast mount cable pack119176 Fast fit plug
BLA DescriptionCode
119032 1.1m S/S VHF aerial with S/S mast mount
BLA DescriptionCode
119000 27MHz 640mm aerial and base119002 VHF 640mm aerial and base
Pacific Aerials
SeaMaster range features:
1. UV resistant polyurethane gloss finish has longer service life over heat shrink coatings
2. Ultraglass marine grade fibreglass whip
3. Internal pre-tuned transceiver wire for increased longevity
4. All brass or copper components to transceiver for peak performance
5. All transceiver and mobile phone models fitted with a fast fit plug that only requires a 9mm cable hole
Quality marine equipment
Aerial Mounts - Multi Adjustable
Two axis multi-adjustable, moulded white nylon bases to allow mounting on both horizontal and vertical surfaces. Quick one quarter turn release to fold aerial down. 1” 14 TPI thread accepts all Pacific standard Seamaster whips.
Aerial Mount - Rail
Single axis articulated, moulded white nylon aerial base, designed for rail mounting. Suits 25mm diameter tubing. 1” 14 TPI thread accepts all Pacific standard Seamaster whips.
Aerial Mounts - Fixed
Fixed horizontal mounting posts with a choice of short nylon or two heights in stainless steel. 1” 14 TPI thread accepts all Pacific standard Seamaster whips.
Aerial Mount - Through Deck
Moulded white nylon, through deck aerial base with 1” 14 TPI thread which accepts all standard Seamaster whips.
Aerial Mount - Multi Adjustable Stainless Steel
Two axis, multi adjustable stainless steel base to allow mounting on both horizontal and vertical surfaces. Quarter turn release to fold aerial down. 1” 14 TPI thread accepts all Pacific Seamaster whips.
Microphone HolderBlack injection moulded nylon microphone holder clip. Supplied complete with stainless steel fasteners.
Cable Outlet CoverThe ideal way to professionally finish cable installations for sounders, radio aerials and any other through hull fitting that has a wire exit. Mounted facing down to dispel water, the cover both protects the opening hole and redirects the cable parallel to the flat surface from which it exits.
BLA Base MountCode Screws mm mm
118900 33x36 4 c/s
BLA Code
118910
80
35
5595
125
BLA Code
119115
BLA Code
119122
18
12
27
9
BLA DescriptionCode
(A) 119104 Pacific nylon adjustable folding base(B) 119105 Pacific nylon H/D adjustable folding base(C) 119120 Plastic knob adjustable folding base(D) 194080 Plastic lever adjustable folding base
108
62
80
(A)67 94
132
(B)
93
130
65
(D)
9465
124
(C)
BLA Code
119106
BLA DescriptionCode
(A) 119110 Stainless steel long post mount(B) 119112 Stainless steel short post mount(C) 119114 Nylon short post mount
70
(B)
(C)
70
40
40
70
(A)
105
section
11
134
ELE
CT
RIC
AL
www.bla.com.au
section
11
135
ELE
CT
RIC
AL
SeaMaster Pro Transceiver AerialsWhite ultraglass whips with cable connection jack built into the mount socket, available to suit 27MHZ, VHF and UHF marine transceivers as well as most GSM mobile phone dash mounted hands free kits. Seamaster Pro aerials have a 1” 14 TPI nylon socket. A range of separately purchased Pro bases (over page) are available for the best possible fit to any vessel. Pro bases are fitted with 5 metre lead and plug.
SeaMaster Pro AM/FM AerialsWhite ultraglass aerials with cable connection jack built into the mount socket, suitable for use with all AM/FM marine radios. SeaMaster Pro aerials have a 1” 14 TPI nylon socket. A range of separately purchased Pro bases (over page) are available for the best possible fit to any vessel. Pro bases are fitted with 5 metre lead and plug.
Longreach Pro AM/FM AerialsWhite ultraglass aerials with cable connection jack built into the mount socket, suitable for use with all AM/FM marine radios. Longreach Pro aerials have a 1” 14 TPI cast stainless steel socket. Separately purchased Longreach Pro bases (over page) are fitted with a 5 metre lead and plug.
BLA DescriptionCode
119074 27MHz 1.8m Pro aerial119075 27MHz 2.5m Pro aerial119081 VHF 490mm Aerial119082 VHF 1.8m Pro aerial119083 VHF 2.5m Pro aerial119084 UHF 1.8m Pro aerial119085 UHF 2.5m Pro aerial119132 GSM phone 1.8m Pro aerial119134 GSM phone 2.5m Pro aerial
BLA DescriptionCode
119090 AM/FM 1.8m Pro aerial without base119091 AM/FM 2.5m Pro aerial without base
BLA DescriptionCode
119092 27MHz 1.8m Longreach Pro aerial119093 27MHz 2.5m Longreach Pro aerial119094 VHF 1.8m Longreach Pro aerial 119095 VHF 2.5m Longreach Pro aerial
BLA DescriptionCode
119099 AM/FM 1.8m Longreach Pro aerial119100 AM/FM 2.5m Longreach Pro aerial
Longreach Pro Transceiver AerialsWhite ultraglass whips with cable connection jack built into the mount socket, available to suit 27MHZ, VHF marine transceivers and CDMA mobile phones. Longreach Pro Aerials have a 1” 14 TPI cast stainless steel socket. Separately purchased Longreach Pro bases (over page) are fitted with a five metre lead and plug.
Quality marine equipment
SeaMaster Pro RangeIn addition to the advantages of standard SeaMaster aerials, the 'Pro' series features NCK connectors in the antenna ferrule and mount. The whip simply unscrews for removal without requiring cable disconnection. Pacific’s Pro Series antennas and mounts have been subject to rigorous electrical and mechanical testing, from tens of thousands of cycles on an antenna ‘breaker' to complete submersion for a fortnight. Pro Series antennas and mounts have passed the International Standard for salt mist exposure (IEC 68-2-52).
In addition, the Pro Series is backed by the same three year warranty that covers the rest of the Pacific marine antenna range.
SeaMaster Pro Mounts - Multi Adjustable
Two axis, multi adjustable moulded white nylon bases to allow mounting on both horizontal and vertical surfaces. Pro transceiver bases are fitted with a 5 metre lead with fast fit plug requiring only a 9mm cable hole and ensuring a reliable electrical connection without solder. The fast fit plug suits virtually all 27 MHz, VHF, UHF transceivers and most digital mobile phone dash mounted hands free kits. Pro AM/FM bases are fitted with a 5 metre lead and an automotive style aerial plug for radio connection. Heavy duty bases are recommended with Longreach Pro whips.
Seamaster Pro Mounts - Rail
Single axis articulated, moulded white nylon aerial base, designed for rail mounting. Suits 25mm diameter tubing. Pro transceiver bases are fitted with a 5 metre lead with fast fit plug requiring only a 9mm cable hole and ensuring a reliable electrical connection without solder. Pro AM/FM bases are fitted with a five metre lead and an automotive style aerial plug for radio connection.
Seamaster Pro Mounts - Fixed
Moulded white nylon bases to suit Seamaster Pro Transceiver aerials. Available in a choice of through deck or pipe mount versions. The pipe version is an insert to suit 25 x 1.6mm tubing with the cable lead inside the pipe. Pro transceiver bases are are fitted with a 5 metre lead with fast fit plug requiring only a 9mm cable hole and ensuring a reliable electrical connection without solder. The fast fit plug suits virtually all 27MHz, VHF, UHF transceivers and most digital mobile phone dash mounted hands free kits.
Emergency vHF AntennaAn essential safety item for any boat fitted with a VHF radio. Also a very practical external antenna for extending the range of hand held VHF radios.• Supplied in a clear tube container
measuring only 50 x 300mm• Eight stage telescopic extension whip• Velcro mount straps• Five metre lead• Supplied with fast fit plugs for all
known fixed and portable radios.
SeaMaster Pro Mounts - Stainless Steel
Two axis, multi adjustable stainless steel base to allow mounting on both horizontal and vertical surfaces. Pro transceiver bases are fitted with a 5 metre lead and plugs to suit either transceiver or AM/FM radio as described above. Recommended with Longreach Pro whips.
BLA Code
119098
BLA DescriptionCode
(A) 119102 Pro transceiver nylon folding base(B) 119103 Pro H/D transceiver nylon folding base(A) 119124 Pro AM/FM nylon folding base(B) 119126 Pro H/D AM/FM nylon folding base
Totally removable whip
Base protective cover
Fast fit plug only 9mm cable hole required
Longreach Pro Stainless steel socket
BLA DescriptionCode
119108 Pro rail mount nylon base119128 Pro AM/FM rail mount nylon base
80
35
5595
125
BLA DescriptionCode
119127 Pro AM/FM stainless steel base119129 Pro transceiver stainless steel base
BLA DescriptionCode
119116 Pro transceiver thru deck mount119117 Pro transceiver pipe mount
108
62
80
(A)
67 94
132
(B)
18
12
27
9 119116
119119
section
11
136
ELE
CT
RIC
AL
www.bla.com.au
section
11
137
ELE
CT
RIC
AL
Longreach HF/SSB AntennasHigh power, 2 to 30 meg antennas for long range single side band communication. External stud for cable connection. Two piece whip with chromed brass connector and base socket. Separately purchased mount kit includes chromed brass hinged deckplate and acetal top support.
Omni Pro UHF Tv AntennaA smaller active TV antenna best suited to UHF TV and FM radio reception. If stronger signals are available it will also provide VHF TV reception. Supplied with powered amplifier to boost weak signals, 200mm mast, through deck mount with 10m coaxial cable and 1.5 metre TV cable.
Longreach vHFTop of the range 4.9 metre VHF antenna with outstanding performance for larger boats. Two piece whip with chrome brass connector and base socket. Five metre lead with fastfit plug that requires a cable hole of only 9mm. Separately purchased mount kit includes chromed brass hinged deckplate and acetal top support.
Longreach mount kit
BLA DescriptionCode
119064 4.9m Longreach VHF aerial only119118 Longreach mount kit
BLA DescriptionCode
119068 4.9m Longreach HF aerial only119118 Longreach mount kit
BLA Dia. Height Power FrequencyCode mm mm volts MHz
119197 200 250 10-14.5 40-890
vHF/27MHz - AM/FM Band SplitterVHF/27MHz -AM/FM broadcast band splitter, with PL259 and car radio connectors. The perfect product for customers who want improved AM/FM radio reception, but don't want to install another antenna. The splitter uses the 27MHz or VHF antenna to provide AM/FM reception, without downgrading the performance of the antenna. Input lead aproximately 100mm long and both output leads aproximately 850mm long.
BLA Code
119194
Omni Pro vHF/UHF Tv AntennaOmni directional marine TV antenna producing high performance on all VHF and UHF TV bands and on FM radio. The larger elements of this full size antenna produce advantages in VHF fringe signal locations over the smaller UHF TV antenna which will also receive VHF signals. Supplied with powered amplifier to boost weak signals, 450mm mast, through deck mount with 10m coaxial cable and 1.5 metre TV cable.
BLA Dia. Height Power FrequencyCode mm mm volts MHz
119196 460 500 10-14.5 40-890
DynaplateThe easy and effective answer to hull bonding and grounding.Improves performance of electronics and reduces RF interference. Sintered porous bronze spheres for maximum conductivity in a compact size. Low drag, non fouling shape. Scrapes clean with a wire brush. Includes gold plated mount hardware.
Omni Pro Tv Antenna MountAccessories to suit the Omni Pro TV antennas above. Cast stainless steel trim ring enhances the on deck appearance of the through deck mounting base. A EDC finished, cast zinc alloy base is available to suit gutter mounting on campervans, motor homes and recreational vehicles.
BLA Length Width HeightCode mm mm mm 119230 152 51 13
BLA DescriptionCode
119198 Stainless steel deck trim ring
Quality marine equipment
Automatic Identification System (AIS) AerialsAutomatic Identification System (AIS) is a marine tracking system used for identifying and locating vessels by electronically exchanging data with other nearby ships and vessels. The AIS unit uses a standardised VHF transceiver to broadcast the vessel’s unique position, course, speed and name which can be displayed on screen in real time. AIS is intended to assist vessels in identifying and allow maritime authorities to track and monitor vessel movements. The frequencies used by AIS to transmit and receive this data are higher than marine VHF frequencies, so using a marine VHF antenna with an AIS unit will compromise the performance of the system, as will the use of a ‘splitter’ to run VHF and AIS from the one antenna. Using a dedicated AIS antenna ensures the best possible transmission and reception range, and maximizes your safety. Pacific Aerials’ new range of AIS antennas are individually tuned and tested to provide optimum performance. A wide range of antenna sizes and mounts provide for any size and type of vessel, from tenders to tankers.
1.0m Masthead AIS AntennaThe P6005 is specifically designed for masthead applications. This 1 metre light weight, low-profile, stainless steel antenna comes complete with ready to install mounting bracket.
1.8m Pro Series AIS AntennaThe P6105 is a specifically designed AIS Pro Series antenna which can be removed and remounted on the boat at the user's convenience. The cable is hardwired to the Sea Master Pro Series mount, so the antenna can be removed without pulling or cutting the cable.The SeaMaster Pro Series AIS antenna is an excellent choice for installations on small to medium sized boats. Superbly finished with glossy UltraGlass this robust and reliable antenna provides outstanding performance.
2.5m Pro Series AIS AntennaThe P6205 is a specifically designed AIS Pro Series antenna which can be removed and remounted on the boat at the user's convenience. The cable is hardwired to the Sea Master Pro Series mount, so the antenna can be removed without pulling or cutting the cable.This Pro Series AIS antenna is superbly finished, combining the glossy UltraGlass aerial with a stainless steel ferrule to produce a robust and reliable antenna with outstanding performance and strength.
2.5m Deep Sea AIS AntennaThe P6305 heavy duty antenna is constructed in industrial grade UltraGlass with stainless steel mounting sleeve and recessed N socket for easy connection to a wide range of cable types. Unbeatable durability and commanding performance make this DeepSea AIS antenna the first choice for professionals.
BLA DescriptionCode
119034 AIS 1.0m Masthead aerial119086 AIS 1.8m Pro aerial119087 AIS 2.5m Pro aerial119138 AIS 2.5m Deep Sea aerial
vHF 1.0m S/S Fold Down AerialThe new VHF 1.0m stainless steel antenna provides full performance and comes complete with positive locking integral fold down mount. Can also be installed on vertical surfaces with use of the optional side mount bracket 119119. Supplied with four meters of cable with fast fit jack for positive connection and easy installation. An additional fast fit plug (119176) is supplied and may be used where necessary by simply screwing onto the fast fit jack. Comes complete with base wedge and cable outlet cover.
Features:• Economical full performance antenna for smaller boats• Suitable for use with all VHF marine transceivers• Exclusive integrated fold down mount• Low windage stainless steel whip• Groundplane independent
BLA DescriptionCode
119036 SST Fold down aerial119119 Side mount bracket
119036
119119
P6005 AIS 1.0m Masthead
P6105 AIS 1.8m Pro Series
P6205 AIS 2.5m Pro Series
P305 AIS 2.5m Deep Sea
section
11
138
ELE
CT
RIC
AL