section 10425 - signs - uc davis healthpdf)/part-iv... · which consist of design drawings, ... the...

PROJECT NO. ####### PROJECT TITLE

CONTRACT TITLE

SECTION 10425 INTERIOR SIGNAGE AND EXTERIOR SPECIALTY SIGNS

PART I - GENERAL

1.01 DESCRIPTION

A. Scope: Work under this Section shall include all necessary services, labor, materials and product to fabricate and install all sign and /or graphic items included in the documents which consist of Design Drawings, Specifications, Signage Schedule and Location Plans.

B. The UCDHS Sign Standards documents for Interior and Exterior Specialty signs are located at the end of this section. These Sign Standards include graphic standards, all sign types and specifications. The Sign Standards shall be followed unless directed otherwise by the University’s Representative.

C. Design Consultants shall be responsible to provide a floor and/or site plan that identifies code compliant sign requirements and location utilizing these campus standard sign types. (omit text- or approved MUTCD Regulatory Signs. )

D. Design Consultants shall be responsible to provide a coded Signage Schedule identifying sign type, quantity, text and graphics required for each sign that correlates to the floor and/or site plans. (omit text -. In addition, the Design Consultants shall provide floor and/or site plans that correlate to the Signage Schedule. )

1. Work specified in this section:

1. Interior Signage

2. Exterior Specialty Signs

1.02 CONDITIONS AND GENERAL REQUIREMENTS

A. Engineering and Code Requirements: For any sign located in the hospital and weighing over 20 pounds the Design Consultant or University’s Representative shall provide an OSHPD approved attachment detail. The sign attachment needs to match the attachment detail exactly, no deviation will be allowed or the sign will need to be removed.

1.03 SUBMITTALS

A. General:

1. FOR ALL INTERIOR, EXTERIOR SPECIALTY AND DONOR (Consultant to omit “Donor” signs if not applicable to the project) SIGN TYPES

2. Refer to the Sign Standards, Section 5, Part 1.03, for instructions regarding signage submittals.

3. Also, submit the following in accordance to the Conditions of the Contract and Division 1 Specification Sections.

4. Submit all Submittals to the University’s Representative unless directed otherwise by the University.

10425 - 1

INTERIOR SIGNAGE AND EXTERIOR SPECIALTY SIGNS 07/2014 Edition

PROJECT NO. ####### PROJECT TITLE CONTRACT TITLE

B. Shop Drawings:

1. Sign Contractor to submit Shop Drawings that comply with the Sign Standards, Section 5, Appendix 1.03, Paragraph D.

2. Reference approved attachment drawings if required.

1. See Conditions and General Requirements, Section 1.02.

C. Samples:

1. Sign Contractor to submit samples that comply with the Sign Standards, Section 5, Part 1.03, Paragraph E

2. Item 3; Required Mock-ups (Consultant to modify)

D. Product Data

1. Submit manufacturer’s, fabricator’s and finisher’s specification, installation and maintenance instructions.

1.04 QUALITY ASSURANCE

A. Sign Fabricator Qualifications: Firm experienced in producing signs similar to those indicated for this Project, with a record of successful in-service performance, and sufficient production capacity to produce sign units required without causing delay in the Work.

B. Single-Source Responsibility: For each separate sign type required, obtain signs from one source of a single manufacturer.

1.05 PROJECT CONDITIONS

A. Verification of Existing Conditions and Documents: Sign Contractor shall visit the Site to inspect all existing conditions and to verify all dimensions which are related to the fabrication and/or installation of sign or graphic items. Sign Contractor shall thoroughly review these documents, checking conditions and dimensions shown. Notify University's Representative of any discrepancies in the documents. Written dimensions shall have precedence over scaled dimensions.

PART II - PRODUCTS

2.01 FINISHES

A. Refer to Sign Specifications, Section 5, Part 2

B. Surfaces of all items requiring a painted finish shall be properly prepared. Tool marks and other imperfections shall be filed and sanded or buffed. Surfaces must be cleaned before applying paint by removing chalk, dust, dirt, grease and oils. All pretreatment and primer provided in accordance with manufacturer’s recommendation. Sufficient primer coats or undercoats shall be applied to achieve a smooth and uniform surface. All painted items shall be spray-painted in a dust free booth, following the paint manufacturer’s recommendations concerning thinning and application. Apply additional coats when undercoats, stains or other conditions show through the color coat of paint, until paint is of uniform finish, color and appearance. All paint finishes must be allowed to dry and cure

10425 - 2 INTERIOR SIGNAGE AND EXTERIOR SPECIALTY SIGNS 07/2014 Edition


CONTRACT TITLE

properly in sign shop, per manufacturer’s instructions prior to graphic application and installation.

C. Omit text for exterior signs

2.02 COPY

A. Refer to Sign Standards, Section 5, Part 2, 2.02, Paragraph A, B, and C

2.03 MATERIALS

A. Refer to Sign Standards, Section 5, Part 2, 2.03, Paragraph A thru K

2.04 PROJECT COLORS

A. Colors: INTERIOR SIGNS

1. See Sign Standards, Section 2, Color Standards

B. Colors: EXTERIOR SPECIALTY SIGNS

1. See Sign Standards, Section 4, Color Standards

2.05 TYPICAL SIGN TYPE

A. INTERIOR SIGN TYPES;

1. See Sign Standards, Section 3

B. EXTERIOR SPECIALTY SIGN TYPES;

1. See Sign Standards, Section 4

PART III - EXECUTION

3.01 INSPECTION

A. Refer to Sign Standards, Section 5, Part 3.01, Execution.

B. For any sign in the hospital that weighs over 20 pounds and requires an OSHPD approved attachment detail an inspection or inspections will be required. The contractor will request the inspection with an Inspection Request as described in Division 1. Concealed attachment points should be inspected prior to the final signage materials being installed.

3.02 PREPARATION

A. Refer to Sign Standards, Section 5, Part 3.02 Preparation

3.03 INSTALLATION

A. Refer to Sign Standards, Section 5, Part 3.03 Installation

B. Sign Installation: Shall be carried out in a neat and proper manner equal to the finest quality standards of the industry.

10425 - 3


PROJECT NO. ####### PROJECT TITLE CONTRACT TITLE

C. Location Drawings: Shall be followed when installing signs and graphic items. Item numbers which are found in the Graphic Schedule identify specific sign units and their locations. Drawing show general location for each sign. Specific locations shall be determined by walking the Site with the University's Representative. Contractor shall post a coded water-resistant label at each sign location during walk-through.

D. Installed Signs: Shall be clean, properly aligned, level and true to line and dimension, flush to surface or as detailed and specified, free of excess visible adhesive, if used. Damage to sign or surrounding surfaces or other imperfections will not be accepted. Any code required labels and shut-off switches to be on exterior of sign shall be concealed from normal viewing and all other labels shall be located inside the sign enclosure.

E. Pin Fasteners: Where pins or other mechanical fasteners are used, also provide silicone or epoxy adhesive to prevent unauthorized removal of signs. All fasteners, structures and units must be structurally sound and comply with all applicable codes requirement and restrictions, including state seismic regulations.

F. Protective Materials: Wrappers, covering, identifying stickers, paper etc., shall be removed from the sign at completion of installation.

G. Any signage with an approved OSHPD attachment detail the installation of the sign must match the detail exactly. Any deviation from the approved attachment detail will not be tolerated and the sign or backing plate will need to be removed upon request at no additional cost to the University.

3.04 FINAL CORRECTIVE WORK

A. Damage to signs or surrounding surfaces shall be repaired to the satisfaction of the University's Representative at no additional cost to the University.

3.05 CLEANING AND PROTECTION

A. During the process of work, remove daily all discarded materials, rubbish, cans, rags, etc., from the Project site.

B. Upon completion of paint work, clean or repaint all paint splattered signs and adjacent surfaces. Remove splattered paint by proper methods of washing and scraping, using care not to scratch or otherwise damage finished surfaces.

C. At completion of installation, clean all sign surfaces in accordance with manufacturer's instructions. Protect units from damage until acceptance by the University's Representative. Repair or replace damaged units as directed by the University's Representative at no additional cost to the University.

1. Check all items for correct placement.

2. Remove all packing material and debris from the site and leave premises in clean condition.

3. Take special precautions to protect finishes.

4. Clean sign material using only cleaners and methods in accordance with the manufacturer's instructions.

10425 - 4 INTERIOR SIGNAGE AND EXTERIOR SPECIALTY SIGNS 07/2014 Edition


CONTRACT TITLE

3.06 GUARANTEE

A. All Product and Work shall be guaranteed for one (1) year from acceptance against cracking, crazing, peeling, blistering, delamination and other defects in material and/or workmanship.

B. All vinyl shall be guaranteed for five (5) years.

C. Furnish a one (1) year warranty, warranting that the paint finishes will not develop non-uniformity of color or fading and will not crack, peel, pit, corrode or otherwise fail as a result of defects in material or workmanship within the following defined limits. Upon notification of such defects, within the warranty period, make necessary repairs or replacement at the convenience of the University.

1. Fading: A change in appearance which is perceptible and objectionable as determined by the University's Representative when visually compared with the original color range standards.

2. Non-Uniformity: Non-uniform fading to the extent that adjacent panels have a color difference greater that the original range of color.

3. Will Not Pit or Otherwise Corrode: No pitting or other type of corrosion, discernible from a distance of 10’, resulting from the natural elements in the atmosphere at the project site.

END OF SECTION 10425

10425 - 5


HEALTH SYSTEM

S I G N A G EG U I D E L I N E S

M A R C H 2 0 1 4

DND

D E B R A N I C H O L S D E S I G N

SECTION 1 INTRODUCTION

VERSION 1 MARCH 2014UC DAVIS HEALTH SYSTEM SIGNAGE GUIDELINES

TABLE OF CONTENTS

SECTION 1 INTRODUCTION PAGE 1-1

Assistance

SECTION 1 INTRODUCTION

page 1-3

Policy Statement page 1-2Table of Contents page 1-1

Typography

Color Standards

Color Matrix

Material Standards

Initial Cap/Cap Proportions

Symbols

SECTION 2 GRAPHIC STANDARDS

page 2-1

page 2-2

page 2-3

page 2-4

page 2-8

page 2-5

Arrows page 2-6

Logo Standards page 2-7

Type, Rule, Backer Ratio page 2-9

Grid page 2-10

Directional Signs

Area Identification Signs

Room Identification Signs

Informational Signs

Code Required Signs

SECTION 3 INTERIOR SIGNS

pages 3-1 thru 3-8

pages 3-9 thru 3-28

page s 3-29 thru 3-33

pages 3-34 thru 3-40

pages 3-41thru 3-54

pages 4-4 thru 4-6

pages 4-7 thru 4-10




Directional Signs

Informational Signs

Code Required Signs

Specifications pages 5-1 thru 5-4SECTION 5 APPENDIX

Site Identification Signs

Building Identification Signs

SECTION 4 EXTERIOR SIGNS

pages 4-3Exterior Colorspages 4-1 thru 4-2Exterior Logo Standards


The University of California, Davis Health System has prepared

these Signage Guidelines to ensure:

The Signage Guidelines is important not only to ensure visual

continuity in the family of wayfinding signage but also to ensure full

compliance with ADA and other state and federal regulations.

The preparation of these guidelines has been a collaborative effort

between Facilities Design and Construction in partnership with

Debra Nichols Design.

Adherence to UCD's logo standard

s and graphic identity system.

Use of high-quality signage materials in all UCDHSsignage applications.

POLICY STATEMENT




ASSISTANCEUCDHS Facilities Design and Construction is charged to develop

Signage Guidelines. If you have questions about the guidelines or

need assistance, please contact:

Nancy Gordon

Facilities Design and Construction

4800 2nd Avenue, Suite 3010

Sacramento, CA 95817

tel: (916) 734-8357

fax: (916) 734-7751

email: [email protected]

SECTION 2 GRAPHIC STANDARDS


TYPOGRAPHY

SECTION 2 GRAPHIC STANDARDS PAGE 2-1

ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghi jk lmnopqrs tuvwxyz1234567890

PRIMARY FONT FUTURA MEDIUM

SECOND LANGUAGE

ABCDEFGHIJKLMNOPQRSTUVWXabcdefghi jk lmnopqrs tuvwxyz1234567890

FUTURA MEDIUM OBLIQUE

SPECIALTY FONT BERKELEY OLDSTYLE ITALIC

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefgh i jk lmnopqrs tuvwxyz

1234567890

SECONDARY FONT FUTURA BOLD

ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890


COLOR STANDARDS

SECTION 2 PAGE 2-2GRAPHIC STANDARDS

P1

P2

P3

White

Gray

Red

“Sinclair White”

PPG custom “Knights Armor”The base is Pitt-Tech 100% Acrylic Satin. DTM (Direct to Metal) Industrial Enamel 90-476 (1 gallon cans). The color formula is: B-8y20, C-y2, F-10.

Match Nevamar Laminate L4 CarmenRed, S-1049

P4 Dark Gray PPG 530-6 “Gibraltar Gray”

SIGN BACKGROUND

V1

V2

V3

V4

T1

White Vinyl

Gray Vinyl

Red Vinyl

Black Vinyl

White Tactile Text

3M 7725-20 “Matte White”

3M 7725-41 “Dark Gray”

3M 7725-53 “Cardinal Red”

3M 7725-12 “Black”

Rowmark 3X1-204

VINYLS AND TACTILE TEXT

G1 Dusted Crystal Vinyl 3M 210-314 “Dusted Crystal”or Translucent White Vinyl 3M 230-314 or Opaque Matte White Vinyl 3M 220/225-20

GRAPHIC

L1

L2

L3

Black

Light Gray

Dark Gray

Nevamar, S-6-001T, Textured

Nevamar Sandpiper, S-6-047T, Textured

Nevamar Gun Metal, S-6-020T, Textured

L4 Red Nevamar Carmen Red, S-1049

LAMINATE COLORS

C1

C2

C3

C4

C5

C6

C7

C8

C9

C10

C11

C12

C13

C14

C15

C16

Accent Red

Light Accent Red

Accent Green

Light Accent Green

Light Accent Blue

Accent Blue

Light Accent Yellow

Accent Yellow

NOT USED

NOT USED

Accent Brown

Light Accent Brown

Red

Black

Light Gray

Silver

ICI 16YR-13-371 “Deep Russet” (#264)

ICI 90YR-35-383 “Ginger Root” (#373)

ICI 70YY-25-200 “Alligator Pear” (#873)

ICI 70YY-46-160 “Thyme” (#879)

Fuller O’Brien 3C12-5 “Austere Blue”

ICI 30BB-17-158 “Blue Waltz” (#1492)

ICI 20YY-65-285 “Indian Corn” (#557)

Sherwin Williams 1363 LRV 41% “Cellini Gold”

Devoe 2W15-5 “Mocha Accent”

Devoe 2W14-4 “Barrington Brown”

Devoe 3W26-4 “Sparkling Garnet”

Match L1-Nevamar, S-6-001

Match L2- Nevamar Sandpiper, S-6-047

Matthews MAP “Brushed Aluminum”C17 Dark Brown Devoe 2W14-6 “Rich Brown”C18 Tan Devoe 2W14-3 “Banyan Brown”C19 Dark Gray Match L3-Nevamar Gun Metal, S-6-020

SUGGESTED ACCENT COLORS


COLOR MATRIXINTERIOR

SECTION 2 PAGE 2-3

SIGNTYPES B2

SIGNTYPES L1, L2, L3 SIGNTYPES A4.2

SIGNTYPES C1, C2

SIGNTYPES C3

SIGNTYPES A5, A6 SIGNTYPES C10, C11

SIGNTYPES A7, A8, A9

SIGNTYPES R1, R4, R5, C4, C4.1,C6

V2

V4

Gray Vinyl

Black Vinyl

3M 7725-41 “Dark Gray”

V1 White Vinyl 3M 7725-20 “Matte White”

3M 7725-12 “Black”

T1 Tactile Text Rowmark 3X1-204

P1 White “Sinclair White”

COLOR V1

COLOR V1

COLOR P3

COLOR P3/L4

COLOR L3

COLOR L1

COLOR V4

COLOR P2/L3 COLOR P2

GRAPHIC STANDARDS

Espanol

Espanol

Wang BuildingEspanol

Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

WingNorth

1L E V E L

EmergencyEspanol

COLOR V4

COLOR V1

COLOR T1

COLOR V1

SIGNTYPES B2.1

COLOR V1

COLOR P3

COLOR C16

COLOR P2

COLOR C14

COLOR V4

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

WingNorth

1L E V E L

EmergencyEspanol

COLOR V4

COLOR V1

SIGNTYPES B1

COLOR P2

COLOR C14

EmergencyMessage

EspanolEspanolCOLOR V1

COLOR V2

SURGERYURGERY

RestroomEspanol

COLOR V1

COLOR P2

COLOR P1

P2 Gray PPG “Knights Armor”

P3 Red Match Nevamar Laminate L4 CarmenRed, S-1049

L3 Dark Gray Nevemar Gun Metal, S-6-020T, Textured

L1 Black Nevemar S-6-001T, Textured

L4 Red Nevamar Carmen Red, S-1049

G1 DustedCrystal Vinyl

3M 210-314 “Dusted Crystal”

C14 Black Match L1-Nevamar, S-6-001

C16 Silver Matthews MAP “Brushed Aluminum”

COLOR T1

COLOR P2

SIGNTYPES R2, R3, C12 SIGNTYPES J1-J7; C5, C8, C9, C13

L1P217

AUTHORIZEDPERSONNELONLY

L1PS17

COLOR V1

COLOR T1

COLOR P2

L1P217ELECTRICALROOMl1p217

Electrical Room

COLOR T1

COLOR P2

Text Line OneText Line TwoText Line Three

COLOR V1

COLOR P2

COLOR V1

COLOR P2

COLOR P1

COLOR V 2

COLOR P2

or TranslucentWhite Vinyl

Opaque MatteWhite Vinyl

3M 230-314

or 3M 220/225-20COLOR T1

COLOR P3

COLOR V1

COLOR P3

COLOR L3

COLOR L1

COLOR V4

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

WingNorth

1L E V E L

EmergencyEspanol

COLOR V4

COLOR V1


SECTION 2 PAGE 2-4

MATERIAL STANDARDS

I

J

K

L

O

P

Q

R

S

T

U

V

WH

M

N

GRAPHIC STANDARDS

PROJECT MATERIALS

A

B

C

D

G

E

F

X

Y

AA

BB

CC

DD

EE

Backer/Background Panel: 1/8” thickbrushed aluminum panel, #4 horizontalgrain, beadblast returns

Bar: fabricated aluminum bar, #4with horizontal brushed finish

Individual Letters: 1/2” thick fabricated aluminum letters #4 brushed faces, beadblast returns. Stroke width of large initial cap to match other letters.

Glass Panel: 3/16” thick clear glass panel

Fastener: #4 brushed aluminum threadedfastener with 3/4” x 3/4” cap

Graphics: Screenprinted graphics/type

Specialty Glass: Western States Glass 3/16”(machine textured glass panel)

G-1 “Cotswald - Treebark”G-2 “Niagra”G-3 “Rain Water”G-4 “Ripple”G-5 “Crystal Ice”G-6 “Krinkle - Spectrum”G-7 “Rain”G-8 “Chord - Spectrum”G-9 “P-516”

H = Horizontal Grain PatternV = Vertical Grain Pattern

Accent/Sign Panel: Expanded PVC panel; surface and edges filled, sanded smooth, and painted face and edges.

Backer/Background Panel: 1/8” thick aluminum painted panel

Backer Plaque: 3/8” thick acrylic

Graphics: vinyl graphics/type

Plaque: 1/4” thick non-glare acrylic


Tactile Text: 1/32” thick Rowmark

Braille: California Grade II clear beadbraille

Adhesive Mount: 3M VHB double sidedtape with silicone

Spacers: 1/16” thick acrylic

Hanging support : 1/2” diameter supporting rod, painted color C16

Internal LED fixture

Aluminum bracket with #4 brushedfinish; mechanically attach to wall

Wall attachment: mechanically attach to wall with screws and L angle supports

Individual Letters: 1/2” thick fabricated acrylic painted letters. Stroke width of large initial cap to match other letters.

Ditigal Print on vinyl; surfaceapplied to sign. Art providedby owner

.080” aluminum painted panel; surface applied vinyl text and symbols; panelto be removeable with magneticbacker

Acetate insert with printed copy

Surface applied laminate

Stud mounts

1” thick fabricated aluminum paintedpanel with applied graphic

Carved or sandblasted logo

External illuminationIndividual sign spots; space far enough away to avoid hotspots and proved even illumination


SYMBOLS


UNISEX RESTROOMISA WOMEN’S RESTROOM MEN’S RESTROOM

HEARING IMPAIREDTELEPHONE

VOLUME ADJUSTABLEPHONE

TELEPHONE NO CELL PHONES

BIOLOGICALHAZARD

RADIOLOGICALHAZARD

MAGNETSTAIR UP STAIR DOWNSTAIRS

ELEVATOR ATM MACHINE

NO SMOKING


ARROWS


ARROW LEFT ARROW RIGHT ARROW UP ARROW DOWN

ARROW DOWNTO THE LEFT

ARROW DOWNTO THE RIGHT

ARROW UPTO THE RIGHT

ARROW UPTO THE LEFT


LOGO STANDARDS


XX

.8X

.2X

.80X

X

.8X

X X

X X

X

.8X

.2X


SECTION 2 PAGE 2-8

INITIAL CAP/CAP PROPORTIONS(For Individual Letters and Letters on a Bar)

PLACE NAME

PLACE NAME

GRAPHIC STANDARDS

X

.8X

.2X

X

.8X

X X


SECTION 2 PAGE 2-9

These proportions are to be used to guide

signtype dimensions for all categories.

Note: All dimensions are to be rounded

up to the nearest 1/8”.

TYPE, RULE AND BACKER RATIOS(For Major Department ID)

N EAME

N EAME

PLLACE

PLLACE

X

.875

X.1

25X

.125X.3125X.1875X

.625X

.125

X

A

.625

X

.5X

2.5X

X X

B

AB

C

PLACE NAME

PLACE NAME B

C

G

A

GRAPHIC STANDARDS


GRID(For Major Department ID)

SECTION 2 PAGE 2-10

X

X

Establish a grid based on the height of the aluminum backer

panel. Size and shapes of decorative panels should conform

to the grid. Panels should be arranged based on available

space and desired emphasis. They are intended to enhance

the sign and message, not overwhelm it.

PPLACE LACE NAMEAME

PLACE LACE NAMEAME

GRAPHIC STANDARDS

Depth Key (For Decorative Panels)

1 Closest To Wall (1/4” From Wall)

2 One Step Out From Level 1 (1/2” From Wall)

3 One Step Out From Level 2 (3/4” From Wall)

4 One Step Out From Level 3 (1” From Wall) 1

2

3

4

SECTION 3 INTERIOR SIGNS

VERSION 1 MARCH 201 4UC DAVIS HEALTH SYSTEM SIGNAGE GUIDELINES

SECTION 3 INTERIOR SIGNAGE DIRECTIONALS PAGE 3-1

SIGN TYPE B1SCALE: 3/4” = 1’-0”

MATERIALS

COLOR

ELEVATION SIDE VIEW

- Not Used

Freestanding Single Sided Directional Sign

B H

- Not UsedL Y

Backer/Background Panel: 1/8” thick brushed aluminum panel, #4 horizontal grain, beadblast returns

A

I

I

Not Used

Graphics: vinyl graphics/type;surface applied

I

J

K

Backer/Background Panel: 1/8” thick aluminum painted; panelwrapped around structural signframe

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

6’-5

”

6’-1

0

”

5”5”

5”

1’-11”

2’-4” 4’-1/4”

WingNorth

1L E V E L

EmergencyEspanol

5”2-

3 /8”

See Color Schedule on Sheet 2-2 and Color Matrix on Sheet 2-3 forfurther details

A

A

K

K

K K

AA

AA

1/8”1/8”

Surface applied laminateAA



SIGN TYPE B1 (CONT.)SCALE: 3” = 1’-0”Freestanding Single Sided Directional Sign

5” 2”E

Q.

EQ.

EQ

.

C L

10”

10”

1” 3/4”

5”1-

5 /16

”1-

5 /16

”

1-3/4”

1-5 /

16”

5 /8”

5 /8”

3-5 /

8”1 /

8”1 /

8”3 /

4”

WingNorth

1L E V E L

EmergencyEspanol

CL

1”

2”

1”11

/2”

EQ.

5/8”

A SINGLE LINE LAYOUT; TYP. DOUBLE LINE LAYOUT; TYP.

10”

10”

5”2-

9 /16

”

3-5 /

8”1 /

8”1 /

8”3 /

4”

Tower

1L E V E L

A

B

5/8”



SIGN TYPE B2SCALE: 3/4” = 1’-0”

MATERIALS

- Not Used

Wall Mounted Directional SignLaminate

B J

Surface applied laminate;panel with copy to be removeablewith magnetic backer

AA

Backer/Background Panel: 1/8” thick brushed aluminum panel, #4 horizontal grain, beadblast returns;

A


K

5’-0

”

C L

COLOR


A

A

A

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

3’-3

”

3’-8

”

10”

5”2-

3 /8”

5”

1’-11”

2’-4”

WingNorth

1L E V E L

EmergencyEspanol

K

K K

AA

AA

1/8”1/8”

K



SIGN TYPE B2.1SCALE: 3/4” = 1’-0”

MATERIALS

- Not Used

Wall Mounted Directional SignPaint

A H

Backer/Background Panel: 1/8” thick aluminum painted panel; paint backer as notedin color schedule

I

I

I I


K

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

3’-3

”

5’-0

”

3’-8

”

10”

5”2-

3 /8”

5”

1’-11”

2’-4”

WingNorth

1L E V E L

EmergencyEspanol

K

K

K K

C L

COLOR


1/8”1/8”



SIGN TYPE B2/B2.1 (CONT.)SCALE: 3” = 1’-0”Freestanding Single Sided Directional Sign

5” 2”E

Q.

EQ.

EQ

.

C L

10”

10”

1” 3/4”

5”1-

5 /16

”1-

5 /16

”

1-3/4”

1-5 /

16”

5 /8”

5 /8”

3-5 /

8”1 /

8”1 /

8”3 /

4”

WingNorth

1L E V E L

EmergencyEspanol

CL

1”

2”

1”11

/2”

EQ.

5/8”

A SINGLE LINE LAYOUT; TYP. DOUBLE LINE LAYOUT; TYP.

10”

10”

5”2-

9 /16

”

3-5 /

8”1 /

8”1 /

8”3 /

4”

Tower

1L E V E L

A

B

5/8”



SIGN TYPE L1SCALE: 1” = 1’-0”

MATERIALS

- Not Used

Small Ceiling Mounted Directional Sign

A G

- Not UsedL T

Accent/Sign Panel: Expanded

PVC panel; surface and edges filled,

sanded smooth, and painted

face and edges.

H

EspanolEmergency6”

VA

RIE

S(7

”-0”

MIN

.)

31/4

”

1”

21/8” 13/4”

EQ

.E

Q.

6’-0”

3’-5”

H U K

Not Used

Not Used


I

J

K

Wall attachment: mechanically

attach to wall with screws and

L angle supports

U

COLOR





MATERIALS

- Not UsedA G




face and edges.

H

EmergencyMessage

EspanolEspanol

6”6”

12”

VA

RIE

S(7

”-0”

MIN

.)

31/4

”

1”

21/8” 13/4”

EQ

.E

Q.

6’-0”

3’-5”

H U K

Not Used

Not Used


I

J

K

Medium Ceiling Mounted Directional Sign

- Not UsedL T

- Not UsedV X



L angle supports

U

COLOR





MATERIALS

- Not UsedA G




face and edges.

H

Message

EmergencyMessage

EspanolEspanolEspanol

6”6”

6”

18”

VA

RIE

S(7

”-0”

MIN

.)

31/4

”

1”

21/8” 13/4”

EQ

.E

Q.

6’-0”

3’-5”

H U K

Not Used

Not Used


I

J

K

Large Ceiling Mounted Directional Sign

- Not UsedL T



L angle supports

U

COLOR



SECTION 3 INTERIOR SIGNAGE AREA ID PAGE 3-9

SIGN TYPE A1SCALE: 3/4” = 1’-0”

MATERIALS

1’-3

”(X

)

VA

RIE

S(8

”-0”

MIN

.)

17/8

”41

/2”

(.4375X)

VARIES ACCORDING TO NAME LENGTH

C

A

G

B

(.625X)

- Not UsedH R

NOTE:

Unless otherwise noted in this

drawing, this signtype follows the

Grid and Proportion Ratios in the

Sign Standards: (Sheet X-X)

Internal LED fixture (optional)S

PHARMACYHARMACY

3/4”

3/4”

3/4”

A: FASTENER DETAIL

PLAN VIEW

3/4”

E

AA

G

S

B

C

S Backer/Background Panel: 1/8”

thick brushed aluminum panel,

#4 horizontal grain, beadblast

returns

A

Specialty Glass: Western States

Glass (machine textured glass

panel)

G

Fastener: #4 brushed aluminum

threaded fastener with 3/4” x

3/4” cap

E

Bar: fabricated aluminum bar, #4

with horizontal brushed finish

B

Not UsedD

Not UsedF

Individual Letters: 9-3/8” cap -

1” thick fabricated aluminum

letters #4 brushed faces,

beadblast returns. Stud mount

to bar. Stroke width of large initial

cap to match other letters.

C

Major Iluminated- Department ID

(.5X)

(.1875X)

COLOR




SIGN TYPE A2.1SCALE: 3/4” = 1’-0”

MATERIALS

Sign Panel: Expanded PVC

panel; surface and edges filled,

sanded smooth, and painted face

and edges; 1” thick

See Color Schedule on Sheet 2-2;

colors vary per project/context

H

13/8

”11

3 /16

”VARIES ACCORDING TO NAME LENGTH

SINGLE LINE LVAYOUT

Backer/Background Panel: 1/8”



returns

A



panel)

G



3/4” cap

E



B

Not UsedD

Not UsedF

Individual Letters: 7” cap -

1/2” thick fabricated aluminum


beadblast returns. Stroke

width of large initial cap to

match other letters.

C

Major Department ID

G

PPLACE LACE NAMEAME

PLACE LACE NAMEAME

A

G

B

HG

H

H

C G

G

A

NOTE:

This signtype follows the


Sign Standards: (Sheet 2-9, 2-10)

3/4”

3/4”

3/4”

A: FASTENER DETAIL

E

VA

RIE

S

VARIES



SIGN TYPE A2.2SCALE: 3/4” = 1’-0”

MATERIALS

Sign Panel: Expanded PVC

panel; surface and edges filled,

sanded smooth, and painted face

and edges; 1” thick

See Color Schedule on Sheet 2-2;

colors vary per project/context

H

13/8

”11

3 /16

”VARIES ACCORDING TO NAME LENGTH

DOUBLE LINE LAYOUT

Backer/Background Panel: 1/8”



returns

A



panel)

G



3/4” cap

E



B

Not UsedD

Not UsedF

Individual Letters: 7” cap -






C

Major Department ID

PPLACE LACE NAMEAME

PLACE LACE NAMEAMEA

G

B

G

G

H

G

H

H

H

C

A

PLACE LACE NAMEAME

PLACE LACE NAMEAME

G

NOTE:



Sign Standards: (Sheet 2-9, 2-10)

3/4”

3/4”

3/4”

A: FASTENER DETAIL

E

VA

RIE

SV

AR

IES

VARIES



SIGN TYPE A3.1SCALE: 1-1/2” = 1’-0”

MATERIALS

43/4

”


-

Hanging support : 1/2” diameter

supporting rod, painted color

C16

R

A



B

Not UsedD Q

Not Used

Individual Letters: 4 3/4” cap -






C

Secondary ID

B

R

C

1”

1/2”

EQ

.E

Q.

SECURITYECURITY

SECURITYECURITY

NOTE:



Sign Standards: (Sheet 2-8)

(6’-8

” M

IN.

whe

n ov

er p

edes

tria

n w

alkw

ayot

herw

ise

arch

itect

to d

eter

min

e)




MATERIALS

43/4

”


A



B

Not Used







C

Wall Mounted Secondary ID

B

C

1”

1/2”

EQ

.E

Q.

SECURITYECURITY

SECURITYECURITY

NOTE:




(6’-8

” M

IN.

whe

n ov

er p

edes

tria

n w

alkw

ayot

herw

ise

arch

itect

to d

eter

min

e)

B

C




MATERIALS

43/4

”1 /

2”1 /

8”


A

B

Not Used

Not Used







C

Department ID - Dimensional Letters

CSURGERYURGERY

NOTE:




SURGERY URGERY RECEPTIONECEPTION




MATERIALS

43/4

”1 /

2”1 /

8”


-A U Not Used

Individual Letters: 1/2” thick

fabricated acrylic painted letters.

Stroke width of large initial cap

to match other letters.

V

Department ID - Dimensional Letters

VSURGERYURGERY

NOTE:




COLOR:


SURGERY URGERY RECEPTIONECEPTION



SIGN TYPE A5SCALE: 1” = 1’-0”

1’-0

”

6”E

Q.

EQ

.

EQ

.E

Q.

Double Sided Small Ceiling Mounted ID

R

1/2”

RestroomEspanol

RestroomEspanol

MATERIALS

6”6”

1’-0” 2’-0”

3’-0”

21/4”

31/4

”31

/4”

EQ. EQ.

SIDE A

SIDE B

H

K

7’-

0”

MIN

.

COLOR:



- Not UsedA G


PVC panel; surface and edges

filled, sanded smooth, and painted

face and edges.

H

Not Used

Not Used


Not Used

I

J

K

Not Used

L

Not Used

O

Not Used

P

Q

R

Not Used

M

Not Used

N



SIGN TYPE A6SCALE: 1” = 1’-0”

1’-0

”

21/8

”11

/4”

63/4

”E

Q.

EQ

.

EQ

.E

Q.


Double Sided Large Ceiling Mounted ID

R

1/2”

Caregiver StationEspanol 8

E A S T

Caregiver StationEspanol8

E A S T

MATERIALS

- Not UsedA G


PVC panel; surface and edges

filled, sanded smooth, and painted

face and edges.

H

Not Used

Not Used


Not Used

I

J

K

Not Used

L

Not Used

O

Not Used

P

Q

R

Not Used

M

Not Used

N

6”6”

1’-0” 3’-6”

4’-6”

21/4”

31/4

”31

/4”

EQ. EQ.

SIDE A

SIDE B

H

K

7’-

0”

MIN

.

COLOR:




SIGN TYPE A7SCALE: 3” = 1’-0”Projecting Area Identification Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

A J

Graphics: vinyl graphics/type;subsurface applied

K


L

O

P

Q

R

S


T

M

N

7’-

0”

MIN

.

EQ EQ

12”

5/8”

1/8”

12”

1 /8”

1 /8”

T

MT

KCOLOR:




SIGN TYPE A7SCALE: 2” = 1’-0”Sign Face Layouts

EQ5/8” EQ EQ 5/8”EQ

8E A S T

8E A S T21

/8”

11/4

”63

/4”

EQ

.E

Q.




SIGN TYPE A8SCALE: 3” = 1’-0”Projecting Area Identification Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

A J


K

Plaque: 1/8” thick non-glareacrylic

L

O

P

Q

R

S


T

M

N

7’-

0”

MIN

.

EQ EQ

8”

5/8 ”

1/8 ”3

EQ

EQ

/41

1 /4”

1 /8”

1 /8”

”8” 5

1 /2”

EQ

EQ

1 /8”

1 /8”

T

T M

K

COLOR:




SIDE A SIDE B

SIDE A SIDE B

SIDE A SIDE B

5 1 /

2”

EQ5/8” EQ EQ EQ 5/8”

EQ

.E

Q.

5”


EQ

.E

Q.

5”


EQ

.E

Q.




4”


EQ

.E

Q.

4”


EQ

.E

Q.

31/2

”


EQ

.E

Q.

SIDE A SIDE B

SIDE A SIDE B

SIDE A SIDE B




51/2

”


EQ

.E

Q.

51/2

”


EQ

.E

Q.

SIDE A SIDE B

SIDE A SIDE B

51/2

”


EQ

.E

Q.

SIDE A SIDE B




51/2

”


EQ

.E

Q.

SIDE A SIDE B

8 8




SIGN TYPE A9SCALE: 3” = 1’-0”Ceiling Mounted Area Identification Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

Not Used

A J


K


L

O

P

Q

R

S


T

M

N

7’-

0”

MIN

.

8”

5 /8

”1 /8

”

3

EQEQ

/411/4” 1/8”1/8”

”

1/8”1/8”

T

EQ EQ

8” 5 1 /

2”E

QE

Q

M

COLOR:




SIDE A/B

SIDE A/B

SIDE A/B

5 1 /

2”

EQ

5/8

”

EQ

EQ

.E

Q.

5”

EQ

5/8

”

EQ

EQ

.E

Q.

5”

EQ

5/8

”

EQ

EQ

.E

Q.




31/2

”E

Q.

EQ

.

SIDE A/B

SIDE A/B

SIDE A/B

4”

EQ

5/8

”

EQ

EQ EQ

EQ EQ

EQ

.E

Q.

4”5

/8”

5/8

”E

Q.

EQ

.




SIDE A/B

51/2

”

EQ

5/8

”

EQ

EQ

.E

Q.

SIDE A/B

51/2

”

EQ

5/8

”

EQ

EQ

.E

Q.

SIDE A/B

51/2

”

EQ

5/8

”

EQ

EQ

.E

Q.

SIDE A/B

51/2

”

EQ

5/8

”

EQ

EQ

.E

Q.

8


SECTION 3 INTERIOR SIGNAGE ROOM ID PAGE 3-29


SIGN TYPE R1 SCALE: 3/8” = 1”

Adhesive Mount: 3M VHB double sided tape with silicone

O

P


Braille: California Grade II clear bead braille

N

Tactile Room Identification Sign

MATERIALS

- Not UsedA L

Plaque: 1/8” thick non-glareacrylic; subsurface painted

M

5'-0

"C L

2"

N

O

3/4

”1 /

2”

1 /2”

5/8

”

8”

1/2 ” 1/2 ”

1/8”

L1P217ELECTRICALROOMl1p217

Electrical Room

8”

3 /8”

3 /8”

M

P

COLOR:






Not Used

K

L


O

P

Tactile Text: 1/32” thick

Rowmark Braille: California Grade II clear bead braille

N

Tactile Room Identification Sign withSecondary Text

MATERIALS

- Not UsedA J

Plaque: 1/8” thick non-glare acrylic; subsurface painted

M

5'-0

"C L

2"

N

O

L1P217

AUTHORIZEDPERSONNELONLY

L1PS17

8”

8”

3 /4

”3 /

4”

3 /8

”5 /

8”

3 /8

”1 /

2”

1/2” 1/2”

1/8”

N

PK

COLOR:





Graphics: vinyl graphics/type;subsurface applied, color to match tactile text

K

L


O

P

Tactile Text: 1/32” thick

Rowmark Braille: California Grade II clear bead braille

N

Tactile Room Identification Sign withSymbols

MATERIALS

- Not Used

Not Used

A J


M

5'-0

"C L

2"

L1P217RESTROOMl1p217 Restroom

8”

6”(O

pen

Fiel

d A

roun

d S

ymbo

l)

1/2 ”1/2 ”

1/8”

3/4

”1 /

2”

1 /2”

3”1 /

2”

5/8

”

10”

3 /8

”

N

O

M

P

K

COLOR:





Backer Plaque: 3/8” thick acrylic;

surface painted

J

K

L

Spacers: 1/16” thick acrylic to allow for insert to slide horizontally from either side

Q

XR


O

P



N

Tactile Room Identification Sign withInsert Pocket

MATERIALS

- Not Used

Not Used

Not Used

A I

Plaque: 1/8” thick non-glare acrylic; optically clear acrylic that allows for clear reading of insert. Subsurface paint background color with areaover insert masked to create aclear window.

M

5'-0

"C L

2"

L1P217L1P217

8”

21/2

”1 /

2”

5”(c

lear

win

dow

)

5-1 /

8”23

/8”

7 /16

”(in

sert

are

a)

3/4

”1 /

2”

3/8

”

8”

1/2” 1/2”

3/8 ”1/8”1/16”

M

J

Q

P

N

O

COLOR:

Y

Acetate insert with printedcopy

Not Used-

Y





Backer Plaque: 3/8” thick acrylic;

surface painted

J

K

L

Spacers: 1/16” thick acrylic to allow for insert to slide horizontally from either side

Q


O

P



N

Tactile Room Identification Sign withLarge Insert Pocket

MATERIALS

- Not Used

Not Used

Not Used

A I

M

M

J

Q

P

N

O

5'-0

"(s

ign

cent

erlin

e on

top

porti

on o

f 81/

2” s

quar

e)C L

2"

81/2”

21/2

”3 /

4”

3 /4”

1 /2”

3 /8”

1/2” 1/2”

1/8”3/8”1/16”

L1P217L1P217

103 /

4”(c

lear

win

dow

)

111 /

16”

(inse

rt a

rea)

23/8

”11

/16”

14”

COLOR:

Plaque: 1/8” thick non-glare acrylic; optically clear acrylic that allows for clear reading of insert. Subsurface paint background color with areaover insert masked to create aclear window.

Y


Y

XR Not Used-


SECTION 3 INTERIOR SIGNAGE INFORMATIONAL SIGNS PAGE 3-34

SIGN TYPE JISCALE: 6” = 1’-0”

Adhesive Mount: 3M VHB

double sided tape with silicone

Small Informational Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K


L

O

P

M

N


5'-0

"

C L

1/8”

8”

8”5 /8

”3 /8

”1 /2

”

1/2” 1/2”

M

K

P

COLOR:





SIGN TYPE J2 SCALE: 6” = 1’-0”



Small Informational Sign with Symbols

MATERIALS

Not Used

Not Used

Not Used

Not Used

-A


J


K

L

O

P

M

N

5'-0

"

C L


10”

3”

8”

6”

(Ope

n Fi

eld

Aro

und

Sym

bol)

1/2

”1

/2”

5/8

”3

/8”

1 /2 ” 1 /2 ”

1 /8 ”

K

K

M

P

COLOR:



SIGN TYPE J3SCALE: 3” = 1’-0”



Medium Informational Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K


L

O

P

M

N

5'-0

"

C L

1/8”12”

3/4”

3/4”

12”

3 /4”

3 /4”

5/8

”3

/8”

3/4

”

Text Line OneText Line TwoText Line ThreeText Line Four

Text Line FiveText Line SixText Line SevenText Line Eight

K

M

P

COLOR:







Medium Informational Sign with Symbols

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K


L

O

P

M

N

5'-0

"

C L

1/8”12”

3/4”

3/4”

12”

3”

6”(O

pen

Fiel

d A

roun

d S

ymbo

l)

3 /4”

5/8

”3

/8”

3/4

”


K

K

M

P

COLOR:







Large Informational Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K


L

O

P

M

N

5'-0

"

C L

M

P

1/8”

12”

3/4”

3/4”

12”

3 /4”

5 /8”

3 /8”

3/4

”


Text Line FiveText Line SixText Line SevenText Line Eight

K

COLOR:







Large Informational Sign with Symbols

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K


L

O

P

M

N

5'-0

"

C L

M

P

1/8”

12”

3/4”

3/4”

12”

3 /4”

5 /8”

3 /8”

3/4

”

Text Line OneText Line TwoText Line ThreeText Line FourText Line FiveText Line SixText Line SevenText Line Eight

K

3”

6”(O

pen

Fiel

d A

roun

d S

ymbo

l)

K

COLOR:







Bed Identification Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K


L

O

P

M

N

5'-0

"

C L

1 /8”

6”

3”

6”

QEQE

EQ

EQ

.

63M

P

K

COLOR:



SECTION 3 INTERIOR SIGNAGE CODE SIGNS PAGE 3-41

SIGN TYPE C1SCALE: 3” = 1’-0”




Women’s Restroom Identification Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K

L

O

P

M

N

1/2" 1/4"EQ EQ

12"

DIA

43

/4"

25 /

8"

QE

QE

L

P

K

5'-0

"

C L

EQ

Sign Type R3Refer to Page x-x

EQ

COLOR:







Men’s Restroom Identification Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K

L

O

P

M

N

5'-0

"

C L

EQ


EQ

1/2 "

12"

4 1/8 "

1/4"

11/4

”43

/4”

25/8

”

1/4" R

L

P

K

COLOR:







Unisex Restroom Identification Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J

Graphics: vinyl graphics/type;subsurface applied to triangle

K

L

O

P

M

N

5'-0

"

C L

EQ


EQ

1/4 " 1/4 "EQ EQ

12"

DIA

ME

TER

41 /

4"

3/8

"

25 /

8"

CL

K

L

L

PCOLOR:




SIGN TYPE C4SCALE: 6” = 1’-0” Tactile Exit Sign

MATERIALS

5'-0

"

C L

2”


O

P

Tactile Text: 1/32” thick Rowmark Braille: California Grade II clear bead braille

N

- Not UsedA L


M

ALTERNATE LAYOUT

5 /8”

1 /2”

3 /8”

8”

1/2”

EXIT ROUTEExit Route

31 /2

”1/8 ”

5 /8”

3 /8”

3 /8”

1 /2”

1/2”

EXIT STAIRDOWNExit Stair Down

M

N

O

P

- Not UsedQ X

COLOR:




SIGN TYPE C4.1SCALE: 6” = 1’-0” Allternate Tactile Exit Sign

MATERIALS

5'-0

"

C L

2”


O

P



N

- Not UsedA L


M

ALTERNATE LAYOUT

5 /8”

1 /2”

3 /8”

6”

1/2”

EXIT ROUTEExit Route

31 /2

”1/8 ”

5 /8”

3 /8”

3 /8”

1 /2”

1/2”

EXIT STAIRDOWNExit Stair Down

M

N

O

P

COLOR:





MATERIALS

- Not Used

UBC Stairwell Sign

A J

Graphics: vinyl graphics/type,subsurface applied

Not Used

K

L

O

P

Not Used

M

Not Used

N

Plaque: 1/8” thick non-glare acrylic;subsurface painted


1/8”1’-2”

11/2” 1/2”

5 /8”

5 /16

”

18”

5”1”

EQ

EQ

1”1”

1”1”

1”1”

MSTAIR 2

1 THRU 3EXIT AT FIRST FLOORDIRECTLY TO EXTERIOR

NO ROOFACCESS

3P

K

5'-0

"

2"

COLOR:




Braille: California Grade II clear beadbraille


COLOR:



MATERIALS

- Not Used

Tactile Stair Level Indicator

A J


Not Used

K

L

O

P

M

N



5'-0

"C L

2"

Alternate Layout - Use Star at Building Exit Level

1/8”6"

6"

EQ

EQ

2"3

/8"

EQ

EQ

2"3 /8

"

3

3QEQE

EQ EQ

1

1

M

N

O

P


Spacers: 1/16” thick acrylic toallow for insert to slide in horizontally from either side


COLOR:



MATERIALS

- Not Used

Evacuation Map Insert Holder

A J

Not Used

Not Used K

L

O Not Used

Not Used

P

Q

M

N

Backer and Face Plaque: 1/8” thick non-glare acrylic; Backer - surface painted; Face - optically clear acrylic that allows for clear reading of insert.Subsurface paint background colorwith area over insert masked to create clear window.


4'-0

"

16”9

/16

”9

/16

”

16”

147 /

8”

(cle

ar w

indo

w)

1 /2

”1 /

2”

15”

(inse

rt a

rea)

1/8 ”1/8 ”1/16 ”

M

M

P

Q

Y

- Not UsedR X


Y



COLOR:



MATERIALS

- Not Used

Maximum Occupancy Sign

A J

Graphics: vinyl graphics/type;subsurface appliedNot Used

K

L

O

P

Not Used

M

Not Used

N


Adhesive Mount: 3M VHB double sided tape withsilicone

M

P

2"

ALIGN

250

MAXIMUMOCCUPANCY

8”

1”1”

5 /8”

1 /2”

3 /8”

8”

1/2”

1/8”

1/2”

K




MATERIALS

- Not Used

Emergency Exit Only Sign

A J

Graphics: vinyl graphics/type,subsurface applied

Not Used

K

L

O

P

Not Used

M

Not Used

N



M

P

5'-0

"C L

EQ. EQ.

K

M

PEMERGENCYEXIT ONLYALARM WILLSOUND8”

5 /8”

5 /8”

1 /2”

3 /8”

8”

1/2”

1/8”

1/2”

K

COLOR:





MATERIALS

- Not Used

“THESE DOORS TO REMAIN UNLOCKED DURING BUSINESS HOURS”

A J


K

1” KTHESE DOORS TO REMAIN UN

THESE DOORS TO REMAIN UNLOCKED DUREING BUSINESS HOURS

CL

C L

COLOR:





MATERIALS

- Not Used

Accessible Entrance Identification

A J


K

COLOR:


31/2”

3'-9

"

6”

K


I

J



O

P



N



MATERIALS

- Not Used

Not Used

Not Used

Area of Refuge Identification Sign

A H


Not Used

K

L

M

M

Alternate Elevation

5'-0

"C L

2"

C4

When applicableStack ST C121/2” below ST C4.

C12

5'-0

"C L

2"

3

3”

6”

(Ope

n Fi

eld

Aro

und

Sym

bol)

8”

1 /2”

1 /8 ”

5 /8”

3 /8”

3 /8”

1 /2”

1/2” 1/2”

AREA OFREFUGEAREA OF REFUGE

1 /2”

N

O

O

P

K

COLOR:



I

J



O

P

Not Used

Not Used

N



MATERIALS

- Not Used

Not Used

Not Used

Area of Refuge Instructions

A H


Not Used

K

L

Ditigal Print on vinyl; surfaceapplied to sign. Art providedby owner

W

M

5'-0

"C L

12”

Are

a fo

r Map

Text

is p

roje

ct s

peci

fic

12”

AREA OF REFUGE

Directions to other means of egress

Persons able to use the exit stairway should do so as soon aspossible, unless you are assisting others.Information on planned availability of assistance in the use of stairs or supervised operation of elevators and how to summon suchassistanceDirections on use of the emergency communication system

INSTRUCTIONS

5 /16

”5 /

8”5 /

8”

3/4” 3/4”

3 /4”

3 /4”

5 /8”

1 /4”

5 /16

”1 /

8”

- Not UsedQ V

K

K

W

P

COLOR:


SECTION 4 EXTERIOR SIGNS

LOGO STANDARDS

SECTION 4 EXTERIOR GRAPHIC STANDARDS PAGE 4-1

X2.

4XX

.8X

.2X

.80X

X

.8X

X X

X X

X

.8X

.2X

LOGO STANDARDSSTACKED

(For Long Building Identification)

SECTION 4 EXTERIOR GRAPHIC STANDARDS PAGE 4-2

X

.85X

.85X

.2X

.3X

.85X .85X

DAVISUCNAME OF SPECIALTY CENTER

X

.85X

.85X

.2X

.3X

.85X .85X

DAVISUCHEALTH SYSTEM

X

.85X

.85X

.2X

.3X

.85X .85X

DAVISUCMEDICAL CENTER

Futura Bold

Futura Medium

Futura Bold

Futura Medium

Futura Bold

Futura Medium

COLOR MATRIXEXTERIOR

SECTION 4 PAGE 4-3

V4 Black Vinyl

V1 White Vinyl 3M 7725-20 “Matte White”

3M 7725-12 “Black”

EXTERIOR GRAPHIC STANDARDS

P2 Gray PPG “Knights Armor”

P3 Red Match Nevamar Laminate L4 CarmenRed, S-1049

L1 Black Nevemar, S-6-001T, Textured

L3 Dark Gray Nevemar Gun Metal, S-6-020T, Textured

G1 DustedCrystal Vinyl

3M 210-314 “Dusted Crystal”

C14 Black Match L1-Nevamar, S-6-001

or TranslucentWhite Vinyl

Opaque MatteWhite Vinyl

3M 230-314

or 3M 220/225-20SIGNTYPES XL, XM

SIGNTYPES XF

SIGNTYPE XD

COLOR V1

COLOR G1

SIGNTYPES XJ, XK


COLOR V1

COLOR P2

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

1L E V E L

EmergencyEspanol

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

EmergencyEspanol

COLOR V1

COLOR P3

COLOR P2

COLOR P2

COLOR C14

COLOR C16COLOR C14

COLOR V4

C16 Silver Matthews MAP “Brushed Aluminum”

3.2

SIGN TYPE XA SCALE: 5/16” -1’-0”

MATERIALS

-

A

Bar: fabricated aluminum bar,

#4 with horizontal brushed

finish

B


panel painted, with applied logo

graphic

CC

Carved or sandblasted logo

graphicDD

External Illumination - Individual

sign spots; space far enough

to avoid hot spots and provide

even illumination of sign

EE

Not UsedD AA

Not Used

Individual Letters: miniumum of

9” high; maximum of 12“ high


or stainless steel letters;

#4 brushed faces, beadblast

returns. Letter material selection

and color to should have min.

70% contrast with background

Stroke width of large initial cap to


Individual letters and bar stud

mounted directly to existing

monument background.

Monument background to be

architectural with strong

contextual connection to

landscape and building.

Material could be stone, concrete,

wood, or stucco.

Sign area to be determined by local regulations

C

MONUMENT ID (WITH STND LOGO)

NOTE:




1.5X 1.5X

36”

MIN

C

A

A

C

C

1.5X 1.5X

B

B

B-B 1” = 1-0”

ALT 1

X

X

X

X

2.4X

2.4X

36”

MIN

ALT 2

B

Y

Y

C

A-A1” = 1-0”

B

Y

1.5Y

CC

DD

C-C1” = 1-0”

C LC L

SECTION 4 EXTERIOR SIGNAGE SITE IDENTIFICATION PAGE 4-4

EE

EE


SIGN TYPE XA (CONT.)SCALE: 3/8” -1’-0”

MATERIALS

-

A



finish

B

Not UsedD DD

Not Used





#4 brushed faces, beadblast

returns. Letter material selection

and color to should have min.

70% contrast with background

Stroke width of large initial cap to





Monument background to be

architectural with strong

contextual connection to

landscape and building.

Material could be stone, concrete,

wood, or stucco.


C

MONUMENT ID (WITH STND LOGO)

NOTE:




1.5X 1.5X

36”

MIN

C

B

B

A

A

B-B 1” = 1-0”

ALT 2

XX

1.5X 1.5X

36”

MIN

ALT 2

B

Y

Y

C

A-A1” = 1-0”

B

Y

1.5Y





EE

EE

EE


SIGN TYPE XA (CONT.)SCALE: 3/8” -1’-0”

MATERIALS

A



finish

B

Not Used





#4 brushed faces,








C

MONUMENT ID (WITH STACKED LOGO)

NOTE:




XX

1.5X 1.5X

1.5XX

X36

” M

IN36

” M

IN

A

A

A

A

ALT 1

ALT 2

C

C

EE

EE

B

A-A 1” = 1-0”

1/4”

Y

Y

- Not UsedD DD





EE

SECTION 4 EXTERIOR SIGNAGE BUILDING IDENTIFICATION PAGE 4-7

SIGN TYPE XBSCALE: NTS

MATERIALS

A



finish

B

Not Used

Individual Letters: Minimum of

12” high; maxiimum 18” high






C

EXTERIOR BUILDING ID

NOTE:



Sign Standards: (Sheet 4-1)C

C

B

A-A 1” = 1-0”

1/4”

VA

RIE

S

SCALE: 3/32” = 1’-0”

12”

23/8

”

35/8

”10

3 /16

”10

3 /16

”103/16” 103/16”

12”

23/8

”

35/8

”10

3 /16

”10

3 /16

”

103/16” 103/16”

DAVISUCUCMEDICAL EDICAL CENTERENTER

VARIES

DAVISUCUCNAME OF AME OF SPECIALTY PECIALTY CENTERENTER




building background.


ALT 1

ALT 2

A

A

A

A

Futura Bold

Futura Medium

Futura Bold

Futura Medium

X

X


SIGN TYPE XCSCALE: NTS

MATERIALS

A



finish

B

Not Used

Individual Letters: Minimum of

10” high, Maximum of 14“ high






C

EXTERIOR BUILDING CANOPY ID

NOTE:



Sign Standards: (Sheet 4-1)C

1/4”

B-B (canopy sign) 1” = 1-0”

VA

RIE

S

SCALE: 3/32” = 1’-0”

10”

2”

3”81

/2”

81/2

”

81/2” 81/2”

10”

2”

3”81

/2”

81/2

”

81/2” 81/2”

DAVISUCUCMEDICAL EDICAL CENTERENTER

Futura Bold

Futura Medium

Futura Bold

Futura Medium




building background.


ALT 1

ALT 2 B

B

B

B

ALI

GN

C

B

X

1.5X




Apply to the second surface of

glass. (Test on site.)

K

SIGN TYPE XDSCALE: NTS

MATERIALS

UC DAVIS GRAPHIC LOGO ELEMENT

SCALE: 3/32” = 1’-0”

DDAVISUCUCNAME OF AME OF SPECIALTY PECIALTY CENTERENTER

COLOR:

See Color Schedule on Sheet 2-2 and ExteriorColor Matrix on Sheet 4-3 for further details



color V4, on the same side of

glass as letters

K

Not UsedAA

Stud mounts BB

SIGN TYPE XESCALE: 1” -1’-0”

MATERIALS

-

A

Not UsedB

Not UsedL X

- Not UsedD J

Not Used

Individual Letters: 8” high



beadblast returns.

Typeface: Futura Medium

Verify letter height to be

determined by city code

C

BUILDING ADDRESS

C

AA- ALT 21” = 1’-0”

BB

1/8”

C

K

AA - ALT 11” = 1’-0”

22792279

22792279

A

A

VA

RIE

S

8”

SECTION 4 EXTERIOR SIGNAGE DIRECTIONALS PAGE 4-11

MATERIALS

ELEVATION SIDE VIEW

Freestanding Double Sided Directional Sign

I

I

I

Not Used

I

J

K

Backer/Background Panel: 1/8” thick aluminum painted; panelwrapped around structural signframe

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

6’-5

”

5”5”

1L E V E L

EmergencyEspanol

K

B

5”2-

3 /8”

Concealed anchor bolts

SIGN TYPE XFSCALE: 3/4” = 1’-0”

MATERIALS

ELEVATION SIDE VIEW

I

I

I

I

J

K

Espanol

Espanol


Pharmacy

Cafe

Medical Records

Espanol

Espanol

Cancer Center

6’-5

”

5”5”

3”3”

5”

1’-11”

5”

EmergencyEspanol

K

B

5”2-

3 /8”

B (see next page)

K


COLOR:


SECTION 4 EXTERIOR SIGNAGE DIRECTIONALS PAGE 4-12

SIGN TYPE XF (CONT.)SCALE: 3” = 1’-0”Freestanding Double Sided Directional Sign

5” 2”E

Q.

EQ.

EQ

.

C L

1” 3/4”

EmergencyEspanol

CL

1”

2”

1”11

/2”

EQ.

B

SECTION 4 EXTERIOR SIGNAGE INFORMATIONAL SIGNS PAGE 4-13

SIGN TYPE XJSCALE: 6” = 1’-0”

Adhesive Mount: silicone

adhesive

Small Informational Sign

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K

Plaque: 1/8” thick painted aluminum

L

O

P

M

N


5'-0

"

C L

1/8”8”

8”

5 /8”

3 /8”

1 /2”

1/2” 1/2”

M

K

P

COLOR:


SECTION 4 EXTERIOR SIGNAGE INFORMATIONAL SIGNS PAGE 4-14

SIGN TYPE XKSCALE: 6” = 1’-0”

Adhesive Mount: silicone

adhesive

Small Informational Sign with Symbols

MATERIALS

- Not Used

Not Used

Not Used

Not Used

A J


K

Plaque: 1/8” thick painted aluminum

L

O

P

M

N

5'-0

"

C L


10”

3”

8”

6”

(Ope

n Fi

eld

Aro

und

Sym

bol)

1/2

”1

/2”

5/8

”3

/8”

1 /2 ” 1 /2 ”

1 /8 ”

K

K

M

P

COLOR:


SECTION 4 EXTERIOR SIGNAGE CODE SIGNS PAGE 4-15

Graphics: vinyl graphics/typeK

SIGN TYPE XLSCALE 3” = 1’-0”

MATERIALS

ISA (Handicapped accessible symbol)

6”

K

31/2”

3'-9

"

COLOR:


SECTION 4 EXTERIOR SIGNAGE CODE SIGNS PAGE 4-16

Graphics: vinyl graphics/typeK

SIGN TYPE XMSCALE 3” = 1’-0”Prop 65 Notice/No Smoking

1”1”

6”(s

ymbo

l wee

ded

out o

f bac

kgro

und

to

reve

al g

lass

)

5 /8”

1 /2”

5 /16

”

K

5’-3

”

NOTE:UNIVERSITY TO VERIFY FINAL COPY

3'-9

"

31/2”

XM

When applicableStack ST XL 1” below ST XM.

XL

COLOR:


MATERIALS

SECTION 5 APPENDIX


SECTION 5 APPENDIX PAGE 5-1

SPECIFICATIONSPART I - GENERAL

1.01 SUMMARY

A. Provide graphics complete as shown and specified in the “UC Davis Health System Donor Signage Guidelines”, on Contract Documents; including (but not necessarily limited to): 1. Exterior Signage. 2. Interior signage

1.02 SYSTEM DESCRIPTION

A. The Contractor is responsible for the fabrication of all components and materials, and the installation of all signage.

B. Fabricate and install signage to comply with ADA Standards, to comply with code requirements including Title 24, to span between structural supports as indicated, to withstand normal loads from gravity, impact and use, without failure, including breakage or deterioration of materials.

C. Structural Properties: 1. Deflection: a. General: Under maximum wind load pressure; do not exceed following overall span deflections. b. Normal to Sign Plane: L/175 or ¾”, whichever is less. c. Parallel to Sign Plane: L/360 or 1/8”, whichever is less.

1.03 SUBMITTALS

A. General: 1. Schedule: Submit shop drawings, product data and samples as noted. Schedule for Submission of Shop Drawings, Product Data and Samples with such promptness to cause no delay in Signage Work or Work of other contractors. Sign Fabricators shall make submittals through Owner’s representative. NO extension time will be granted because of failure to make submittals in ample time to allow for processing.

2. Identification: Properly identify each submittal with name of Project, Contractor, Subcontractor and date. Accompany each submittal by an acceptable transmittal form referring to Project name, Specifications section number and paragraph number when applicable, for

identification of each item. Consecutively number shop drawings for each section of Work; retain numbering system throughout all revisions. Allow clear space on each drawing and sample for Contractor’s and Graphic Designer’s stamp. Where clear space is not available on samples, submit with tags or stickers attached.

3. Contractor’s Responsibility: a. Stamp shop drawings, product data and samples with Contractor’s stamp certifying it has been coordinated and checked by Contractor for completeness and compliance with Contract Documents. Clearly note proposed deviations from Contract Documents on submittals. Contractor responsible for quantities and dimension shown on submittals. b. Exterior general contractor should recommend any deflection criteria regarding spanning elements and anchorage for exterior signage.

B. Owner and Owner’s Representatives Review: 1. General: Except for finish, color and other aesthetic matters left to the Owner and Owner’s Representatives decision by Contract Documents, review of shop drawings, product data and samples is only for Owner’s convenience in following work and does not relieve Contractor from responsibility for any deviations from requirements of Contract Documents. Do not construe the review as a complete check nor relief from responsibility for errors of any sort in shop drawings or schedules, or from necessity of furnishing Work required by Contract Documents which may not have been shown on shop drawings. The review of a separate item does not indicate review of complete assembly in which it functions.

2. Submittals: Not stamped by Contractor, and submittals which in the reviewers opinion are incomplete, contain numerous errors or have not been checked or have only been checked superficially, will be returned for resubmittal. a. Processing: Architect, Owner and Owner’s Representatives will review shop drawings, product data and samples with reasonable promptness and will return them to Contractor with Owner and Owner’s Representatives stamp applied thereto. Notations by reviewer which change contract or time of completion shall be brought to Owners attention before proceeding with Work. Each submittal will be stamped indicating appropriate action as required.


PAGE 5-2SECTION 5 APPENDIX

C. Product Data: Submit manufacturer’s, fabricator’s and finisher’s specifications, installation and maintenance instructions.

D. Shop Drawings: Show in detail, materials, dimensions, thickness’, methods of assembly, attachments, relation to adjoining Work, and other pertinent data and information. 1. General: Show fabrication and attachment details. 2. Typography: Complete alphabet; each typeface specified. 3. Patterns: Full size; each sign type. 4. Logos: Full size; each design.

E. Samples: Submit two (2) of the following listed samples; additional if specifically requested. 1. Materials: a. Acrylic: 6” x 6” piece in thickness and color specified. b. Adhesives and Tapes: Each type used. c. Fasteners: Each type used. d. Glass: 12” x 12” piece in thicknesses specified. e. Metals: 6” x 6” piece in thickness and color specified. f. Paint: 6” x 6” brushout of each color specified, including clear coat. g. Laminates: 6” x 6” piece in color specified. h. Vinyl Letters: Logo and typeface as specified. 2. Fabricated Items: a. One each sign type, may be used for production if acceptable. 3. Mock-ups: a. TBD on a project by project basis.

1.04 DELIVERY, STORAGE AND HANDLING

A. Delivery: Coordinate delivery with Owner’s Representative. Deliver fabricated units and component pieces to Project completely identified per installation drawings. Inspect Work for damage upon delivery to site.

B. Storage: Coordinate storage with Owner’s Representative. Store components and materials in clean, dry location. Protect from damage until installation.

C. Handling: Handle signage on site at a minimum; exercise care to avoid damaging surfaces.

1.05 SCHEDULING

A. General: Coordinate with Owner’s Representative to assure other trades affected by Work are performed in proper sequence. Furnish setting templates, layouts, anchors, fasteners and other built-in items as required to cause no delay.

B. Contractor shall submit a schedule of submittals, fabrication and installation with bid response and shall maintain/update such schedule throughout the progress of the contract as requested by Owner.

PART 2 - PRODUCTS

2.01 FINISHES

A. Non-glare with fine sanded edges.

2.02 COPY

A. Futura Medium, Futura Bold, Futura Medium Oblique, Berkeley Oldstyle Italic.

B. Copy application and placement of copy shall follow the dimensions and spacing indicated on the design drawings and/ or approved patterns. Letter spacing shall conform to standards shown and kerned optically to the acceptance of the Owner’s Representative. Lines of copy shall be straight and parallel to the sign format unless otherwise specified. Edges of letters, numbers and symbols shall be smooth and continuous with straight and curved portions reproducing the original forms exactly, with corners sharp and true. All copy shall be free of ticks, line waiver, discontinuous curves or other imperfections.

C. Do not alter fonts.

2.03 MATERIALS

A. Acrylic Sheet: 1. Optix’s “Plaskolite” or equal, clear and non-glare. a. Fire Resistant Plastic: Clear acrylic or polycarbonate sheet; ¼” thick, unless otherwise shown. Flame spread 25 or less when tested per ASTM E84.

SPECIFICATIONS


PAGE 5-3

B. Adhesives and Tapes: 1. Silicone adhesive/ sealant. For attachment of metal letters and plates make permanent and vandal-proof. 2. Foam Tape: 3M VHB (Very High Bond) 3. Neoprene Tape: Pressure-sensitive adhesive. 4. Double-Sided Clear Adhesive Tape: 3M. 5. Magnetic Tape: Pressure-sensitive adhesive back; 3M.

C. Fasteners: 1. General: Types as required: Fabricate from 300 series non-magnetic stainless steel of types best-suited for purpose. Fabricate washers from same type stainless steel. 2. Expansion Bolts: Hilti Kwik Bolt II; stainless steel. 3. Exposed in Finish Surfaces (where shown on drawings): Philips recess, countersunk type screw head, unless otherwise shown. Heads finished to match adjacent surface. 4. Fastener Caps: Finishes as selected. 5. Hollow Wall Fasteners: a. General: Metal toggle bolts; for threaded rods not less than 1/8” in diameter. D. Glass: 1. Low-iron clear tempered float glass, ASTM C1048, Type 1, Class 1, Quality q3; thickness as engineered by manufacturers but not less than as shown. 2. Laminated: a. Plastic Interlayer: Polyvinyl butyral, with a proven record of no tendency to bubble, discolor or lose physical or mechanical properties after laminating and install, clear, 0.060” thick. b. Fabrication: Two panes of glass of equal thickness, laminated with plastic interlayer by heat-plus-pressure process to produce glass free from foreign substances and air/glass pockets. 3. Edges: Exposed bevel seams. Grind and polish edges and seams to brilliant finish; no edge imperfections. 4. Specialty Glass: a. Western States Glass. 180 Main Ave., Sacramento, CA 95838. www.westernstatesglass.com. b. Patterns and colors are as shown on drawings.

E. Metals: 1. Aluminum: a. General: Use alloy and temper best-suited for purpose.

b. Extrusions: AA 6061 or 6063 alloy, T5 or T6 temper. c. Sheet: AA 3033 alloy, H14 or H32 temper. d. Finish: 1. Brushed: No. 4 finish, run grain horizontal, unless otherwise shown. 2. Satin: Non-directional finish. 3. Beadblasted: Match designer’s sample. 4. Polished: No. 8 finish. e. Anodized Finish: 1. General: Finish per aluminum manufacturer’s quality control plan and recommended procedures. No rack or gripper marks permitted on exposed surfaces. Assemblies to be anodized shall be free from non-aluminum materials such as gaskets, seals and sealants. 2. Stainless Steel: a. General: ASTM A167/316; 22 gauge sheet unless otherwise shown; sheet stretcher leveled; 2B mill finish. b. Tube: Non-magnetic, Type 316. c. Finish: 1. Brushed: No. 4 finish, run grain horizontal, unless otherwise shown. 2. Satin: Non-directional finish. 3. Beadblasted: Match designer’s sample. 4. Polished: No. 8 finish. 3. Steel: a. Exterior: 1. Sheet: Carbon steel galvanized per ASTM A525, coating G-90. 2. Extrusion: Galvanized: ASTM A36. b. Interior: 1. ASTM A36. F. Paint: 1. General: Provide colors as required. All paint to be California VOC compliant. 2. Materials: a. Polyurethane Enamel: 1. For Aluminum and Steel Surfaces: PPG’s MAP , or equal; waterbase acrylic polyurethane enamel. b. Metallic Color: PPG’s MAP , or equal; waterbase acrylic polyurethane enamel. c. Silkscreen Enamel: Type recommended by manufacturer for exterior and interior exposures and applicable substrates. Provide compatible clear topcoat. d. Enamel Fill: Same as polyurethane enamel.

SECTION 5 APPENDIX

SPECIFICATIONS


PAGE 5-4

3. Primer- as recommended by manufacturer.

G. Plastic Laminate: Nevamar’s High Pressure Decorator laminate. www.nevamar.com.

H. Silicone Sealant: Dow Corning 790/795, GE Silpruf or equal; clear unless otherwise noted.

I. Vinyl Letters: 1. 3M, or equal; die-cut vinyl letters with pressure-sensitive adhesive backs; styles, size and colors as selected. Premium grade with 5 year exterior and 7 year interior guarantee. 2. Reflective Type: Custom die-cut from 3M’s Scotchlite sheet; pressure-sensitive adhesive coated; standard colors as selected.

J. Tactile copy: Romark’s “ADA Alternative” solid color.

K. Inserts: 0.0075” optical clarity clear acetate w/white or dark gray printed copy. PART 3 - EXECUTION

3.01 INSPECTION

A. General: Examine surfaces and construction. Give written notice of conditions adversly affecting installation, preformance and quality of Work. Do not proceed until conditions are satisfactory.

3.02 PREPARATION

A. Field Measurements: Coordinate onsite visits with Owner’s Representative. Obtain dimensions for Work to meet Project conditions.

3.03 INSTALLATION

A. General: Install graphics plumb, level and true. Align with adjacent Work where shown. Follow location drawings when installing signage and graphics.

B. Provide all necessary anchors and fasteners where necessary for securing graphics in place; including threaded fasteners for concrete and masonry insets, toggle bolts, through bolts and other connectors as required.

C. Form tight joints with exposed connections accurately fitted with uniform reveals and spaces for sealants and joint fillers. Where cutting, welding and grinding are required for proper shop fitting and jointing of the Work, restore finishes to eliminate evidence of such corrective Work.

D. Do not cut or abrade finishes that cannot be completely restored in the field. Return items with such finishes to shop for required alterations, followed by complete refinishing or provide new units at Owner’s option.

3.04 CLEANING

A. General: Remove smears, spots, and other markings. Do not use alkaline or abrasive cleaning agent. B. Clean all existing architectural finishes, furniture or adjacent areas of any dirt and debris resulting from installation.

3.05 PROTECTION

A. Protect finishes of signage and graphics from damage during construction period by use of temporary protective covering

B. Restore finishes damaged during installation and construction period so that no evidence remains of correction Work. Return items which cannot be refinished in the field to the shop; make alterations and refinish entire unit, or provide new units as required.

C. Existing Construction- Protect furniture, architecture and finishes from any damage which could result from installation of signage and graphics.

D. Should damage occur to the existing construction, Contractor shall be responsible for such damage. Owner shall have the right to elect to have Contractor correct damage or to correct the damage/work and withhold cost from contractor’s payment.

3.06 GUARANTEE

A. All products shall be guaranteed for one (1) year against cracking, peeling, blistering, delamination and other defects in material and/or workmanship.

SECTION 5 APPENDIX

SPECIFICATIONS