section- 1: qualification and experienceiciea.cumhuriyet.edu.tr/images/abass.pdf · dossier of dr....

1

Dossier of Dr. Abbas S Hakeem - Resume – Highlights

Personal Details

Name: ABBAS SAEED HAKEEM

Address: Center of Research Excellence in Nanotechnology (CENT)

King Fahd University of Petroleum & Minerals KFUPM Box 5040, Dhahran 31261 Kingdom of Saudi Arabia

Phone: + 966(13) 860 7834 (W)

Mobile: + 966 595435480

Fax: + 966(13) 860 7264

E-Mail: [email protected]

[email protected]

1.2. Academic Achievement

1.2.1. Education

Degree Major Field and

Specialization Institution Date Class

PhD Materials

Chemistry

University Of Stockholm (Arrhenius

Laboratories) Sweden. 2007 -

MSc (Engineering)

Materials Science Department Of Materials, Leeds

University, Leeds, West Yorkshire, U.K. 2001

First

Class

BSc (Engineering)

Materials Science Institute Of Engineering And Technology,

University Of The Punjab, Lahore,

Pakistan

1997 First

Class

PhD Dissertation

Novel Route of Oxynitride Glass Synthesis and Their Characterization

Project before PhD.

Six-Month Project on Sialon Materials, (2002) Carry On Same Project As A PhD Project On Ln-

Sion Glasses, Its Synthesis, And Characterization.

M.Sc. MATERIALS ENGINEERING

Tempering Of Engineering Steel (MSc. Eng. Thesis title)

B.Sc. FINAL YEAR PROJECTS

Process Design on Aluminum Fan Plate, Applying Following Processes Respectively; Pressure Die-

casting and Centrifugal Casting.

Courses studied during PhD and Master Studies

Section- 1: Qualification and Experience

mailto:[email protected]

mailto:[email protected]

2


PhD: Materials Chemistry, Solid State Chemistry, Nanostructured Materials (Kth, Sweden), and Advance

Transmission Electron Microscopy.

Master: Characterization of Materials, Thermodynamics of Materials, Phase Transformation, Materials Science,

Properties of Materials and Physical Metallurgy.

1.3. Computer Knowledge and Skills

Operating: Windows, NT Explorer, Microsoft Office, Endnote, Corel Draw, Origin, Diamond, Easy Plot, Carinev3, Matlab. etc. and Management and Entrepreneurship.

1.4. Research Skills and Interests

Advanced Materials Development For Engineering Applications

Synthesis of Hard, Light Materials and Composites Materials

Ceramics and Polymeric Membrane Development

Sintering of Nano-Structured Light Metals And Composites By Advance Sintering Techniques

Cubic Boron Nitride Nanocomposites for Harsh Conditions

Development and Management of Client-Focused R&D Programs

High-performance Thermoelectric Nanostructured Materials

Project Planning and Management

1.5. Employment History

September 2010 to Present

Center of Research Excellence in Nanotechnology Research Institute King Fahd University of Petroleum & Minerals

Job Title Research Scientist II (Associate Professor)

Job Description and Responsibilities

To perform assigned tasks under the immediate supervision of CENT Director

Independently applies advanced scope of scientific knowledge and principles in planning and executing lab research, and other labs issue such as purchase, service and maintenance etc.

To conduct research at CENT and take care of imaging lab allocated in the building of Research Institute. Imaging lab consists of various equipment, such as dual beam, XRD, microCT, Fluorescent optical microscope and AFM. To give support to conduct experiments for CENT members, as well as, rest of other scientists, master and PhD scholars at the University and national level

Support in the Characterization and Nano-Powder Metallurgy Labs of CENT

Assist in multidisciplinary client-funded projects and R&D programs

Responsibilities, Planning, managing and coordinating activities of multi-disciplinary and multi-national research teams

Development of strategic plan for the CENT

Developing and marketing research ideas, and preparing proposals,

Teaching and Training Activities; such as; tutorial, seminar, summer training, workshops, Student Mentorship Program and coop training program etc.

January 2007 to June 2010

Department of Materials Science, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology,

3


KPK, Pakistan

Job Title Assistant Professor

Job Description and Responsibilities

Teaching both level undergraduate and graduate students (two courses per semester to Materials Science students)

Courses Including Ceramics And Glasses, Ceramics Engineering, X-Ray Diffraction And Crystallography, Strength Of Materials, Powder Metallurgy, Materials Science (Basic), Alloy Production, Heat Treatment & Processes, Thermodynamics of Materials, Materials Characterization Techniques And Casting Tech. & Foundry Technology, Etc.)

Supervised Of Undergraduate Senior Project Design

Advisor Of Undergraduate Students For Three Years

Internship Coordinator

Internal Examiner of Master Degree/ PhD Candidates (Shape Memory Alloys, Glass Coating, Role Of CNT Addition & Processing Parameters on Alumina-Based Composite, Etc.)

External Examiner (For Final Year Project At Punjab University, Pakistan)

Internal Examiner (Master And PhD Thesis At GIK Institute)

Summer Internship Coordinator For 12 To 15 Weeks Training At Local Industries As Well As; Foreign Universities Such As; Stockholm University, University Of Calgary And KAIST And Responsible For Technical Report Evaluation

Taught basic materials chemistry course at Stockholm University till 2006

Industrial and Entrepreneur Work Experience

Burhan Woollen Mills (Pvt.) Ltd. Wah Cant. Pakistan

Job Description: Maintenance Superintendent Engineer and Junior Executive (1990-1992)

Pakistan Ordinance Factories, Wah Cant., Pakistan

Job Description: Engineer (1995)

Area Of Training: Foundry Factory, Forging Shop, Machining Shop, Heat Treatment Shop,

Tungsten Alloy Factory, Materials Testing Laboratory, Precision Casting Factory, Pattern

Making Shop, Quality Control Section

Ahu Tanning and Finishing (Pvt.) Ltd., Gujrat, Pakistan

Job Description: Assistant to Chief Technologist and Materials Science Engineer, (1997-

1999)

Siyab Textile Public Ltd., Gujrat, Pakistan

Job Description: Director (1992-2005)

2.1. Research Activity at KFUPM

Section-2: R&D Accomplishments

4


To provide support to conduct experiments for CENT members, as well as, rest of other scientists,

master and PhD scholars at the University and national level. As well as scientists must be meticulous

in their duties of collecting, analyzing and compiling data, preparing reports and maintaining records.

This also involves the most importantly the discussion of the results, i.e. structures and morphologies

of the synthesized nano-micro materials and their solution and the understanding of the (FESEM and

XRD) structures. In short; as a scientist, I have an experience (more than 15 years) on various

techniques and equipment, which could be valuable to take care and provide useful guidance to the

engineers and helping to conduct experiments.

The work ensures its relevance to the Center’s mission and vision. I also provide support on client-

funded as well as; NSTIP funded projects in the capacity of co-investigator and principal investigator

respectively; details are appended in the project involvement section. Due to multidisciplinary nature of

the work, extensive research collaborations are also in place to ensure the quality and strategic

relevance to overall Center’s research objectives. Responding to this issue, I have fostered

collaborations at KFUPM and with other universities within the Kingdom and outside. Some of my

published papers and ongoing research activities are resulted from this collaborative work,and

contributes towards KFUPM international image.

I am a regular reviewer for several journals, research projects (for different funding authority), and have

acted as an external examiner for a number of PhD and MS thesis. I have further attended and

presented at national and international conferences.

2.2. R&D Contributions and Accomplishments

Characterization of materials and consultancy, etc. Saudi-Aramco Saudi Arabia

Characterization of materials and consultancy, etc. Yokogawa Saudi Arabia

Characterization of materials and consultancy, etc. Halliburton Saudi Arabia

Characterization of materials and consultancy, etc. Baker Hughes Saudi Arabia

2.3. Publications (Table- 2.3. A - C)

Published above Fifth research papers in refereed ISI journals and few manuscripts are

submitted or under preparation

Over Eighteen (18) international conference oral presentations

(Appendix-1)

2.4 Patent

457895US8: Sialon Ceramics And A Method Of Preparation Thereof (Filled)

2.5 Non-Self Citations

Over four hundred no-self citation (Appendix-2)

3.1. Funded Research Projects at KFUPM

3.1.1. Completed, Ongoing and Approved

Project Title

Start Date/ End Date

Role

Section- 3: Professional Performance and Leadership

5


Project Number and Funding Organization

Total Value of Project

(SAR) 10-NAN1387-04 (NSTIP)

Development of Highly Efficient Visible-light-driven Mesoporous Nanostructured Materials for Photocatalytic Applications

Sept. 2011/ Aug. 2013 (completed)

1,998,000

CO-I, leading critical task

10-NAN1388-04 (NSTIP)

Development of Advanced and Functional Nanostructured Mesoporous Zeolites for Hydrodesulphurization and Other Catalytic Applications in Petroleum and Petrochemicals

Sept. 2011/ Aug. 2014 (completed)

20,00,000

CO-I, leading critical task

10-ENE1375-04 (NSTIP)

Development of Nitrogen Modified CNTs as Pt-Free Catalyst for Fuel Cell Applications

Sept, 2011/ Aug, 2015 (completed)

1,980,000 CO-I, leading critical task

10-NAN1392-04 (NSTIP)

Carbon Nanofibers Grown on 3-D Solid Structures for Applications in Energy-Related Catalysis

Sept, 2011/ April, 2015 (completed)

1,980,000

CO-I and leading critical task

12-ADV2411-04 (NSTIP)

Processing and characterization of SiAlON-based ceramic nanocomposites reinforced with SiC and WC nanoparticles for cutting tool and wear resistance applications

Sept., 2013/ Aug. 2016

19,96,000 PI, managing overall project work and leading critical

task

12-NAN2374-04 (NSTIP)

Numerical and Experimental Study of Aluminum-Ceramic Metal Matrix Nanocomposites using Spark Plasma Sintering

Sept., 2013/ Aug. 2015

14,02,000 CO-I and leading critical task

13-NAN1700-04 (NSTIP)

Fabrication of boron nitride nanocomposites hard materials for cutting tool and abrasive applications by spark plasma sintering

Sept. 2014/ Aug. 2016

19,72,000 PI, managing overall project work and leading critical

task

13-NAN1702-04 (NSTIP)

Hierarchical Structured Catalysts for Sustainable Production of Chemicals and Eco-friendly Fuels

Sept. 2014/ Aug. 2016


15-NAN4709-04 (NSTIP)

Using fluorescent pyrene-functionalized sol-gel silica nanomaterials to

Dec. 2015/ Nov. 2017


6


construct highly selective, sensitive, and portable opto-chemical mercury sensors

SABIC Development of novel

metallic micro-droplet based composites: Experimental analysis and Computational modelling

Feb. 2015/ Mar. 2016

99,800 CO-I and leading a critical task

Maarifah Nanostructured thermoelectric materials (TEMs) for energy harvesting application prepare via mechanically induced alloying followed by spark plasma sintering (SPS)

Sept. 2017/ Aug. 2019

748,840 PI and leading critical task

Saudi Aramco Development of High-

Temperature Membranes for Hydrogen Separation from Reactive Environment

Jan.2018/ Dec. 2021


RESEARCH PROJECTS (2010-2017)

• Development of nitrogen-modified CNTs as Pt-free catalyst for fuel cell applications

• Carbon nanofibers grown on 3-d solid structures for applications in energy-related catalysis

• Development of highly efficient visible-light-driven mesoporous nanostructured materials for

photocatalytic applications

• Development of advanced and functional nanostructured mesoporous zeolites for

hydrodesulphurization and other catalytic applications in petroleum and petrochemicals

• Numerical and experimental study of aluminum-ceramic metal matrix nanocomposites using

spark plasma sintering

• Synthesis of sialons for hard materials and led applications

• Synthesis of thermoelectric materials via SPS and PLD

• Synthesis of aluminosilicate oxynitride leads

• Synthesis of cBN-sialon for hard materials

• Investigation of micro and nano-gap electrode based nanostructured sensor for ultrafast

detection of hydrogen

• Hierarchical structured catalysts for the sustainable production of chemicals and eco-friendly

fuels

• Sintering of nanostructured hard materials by advance sintering techniques

• Sintering of nanostructured aluminium-based alloys advance sintering techniques

• Sintering of nanostructured light metals and composites by advance sintering techniques

• Sintering of nano-alumina ceramics and composites

• Micro/nano-yttrium stabilized zirconia by spark plasma for catalytic applications

• Preparation of micro/nanocomposite alumina plus ash

7


• Thermoelectric material inxsn1-xte prepared by spark plasma

TEACHING DURING Ph.D. DEGREE (2003-2007)

Teaching Of Undergraduate During Ph.D. Degree (At Stockholm University)

Graduate Project Supervisor During Ph.D. Degree (At Stockholm University)

Course Projects Like Synthesis Of Single Crystal And Determine Crystal Structure And Charaterisation For Example Magnetic Properties, Review; Presentation On Bulk Metallic Glasses And Eight Credit Course On Oral Presentation

Teaching Fresh Ph.D. Scholars

AFTER PH.D DEGREE (2006-2010)

Teaching Undergraduate And Graduate Courses (Including: Ceramics And Glasses, X-Ray Diffraction And Crystallography, Strength Of Materials, Powder Metallurgy, Materials Science (Basic), Alloy Production, Heat Treatment & Processes, Thermodynamics Of Materials, Materials Characterization Techniques And Casting Tech. & Foundry Technology, Etc.)

Supervisor Of Undergraduate Senior Project Design (Final Year Project) I) Synthesis Of Bulk Metallic Glasses Ii) Synthesis And Comparative Study Of Hap/Stainless Steel Functional Graded Materials Used In Biomedical Implants

Advisor Of Undergraduate Students For Three Years

Internship Coordinator

Been Internal Examiner Of Master Degree/Ph.D. Candidates (Shape Memory Alloys, Glass Coating, Role Of Cnt Addition &Processing Parameters On Alumina Based Composite, Etc.)

External Examiner (For Final Year Project At Punjab University)

Internal Examiner (Master and Ph.D. Thesis at Gik. Institute)

PROJECTS SUPERVISOR GRADUATE LEVEL (2006-2017)

Study And Synthesis Of Piezoelectric Materials (Bitio3)

Production Of Aluminum Metal Foams

Enhancing Bond Strength In Bioactive Ha Coatings Of Ti-Ni, Ti-Nb Alloys By Varying Particle Size + Shape Of Ha

Synthesis And Properties Study Of Copper, Cuprous Oxide Cnt Reinforced Nano-Composites

Preparation Of Bulk Metallic Glasses And Study Of Their Structure And Properties

Increasing The Efficiency Of Back Contact Layer (ZnTe) Of CdTe Solar Cell

Light Metal Alloy. Magnesium Alloys

Nickel-Ceramic (Fiber / Whole Sic + BN) Composite Coatings In Engine Application

Fabrication Of Composites And Process Of Spark Plasma Sintering

Synthesis Of Aluminosilicate Oxynitride Drilling Bits Prepare By Spark Plasma Sintering

Synthesis Of cBN-Sialon For Hard Materials Sintered By Spark Plasma Sintering

3.1.2. Projects Proposals under Preparation

Project Title

Funding

Organization

Duration Role Status

Development of alumina silicate oxynitride for

LEDs application

NSTIP 24

Months PI

In preparation

Maarifah 24

Months PI Submitted

8


Nanostructured thermoelectric materials (TEMs) for energy harvesting application prepare via mechanically induced alloying followed by spark plasma sintering (SPS)

3.2. Research Facility Development

Enhanced the capability of research laboratory and equipped with most important of the required

equipments and Chemicals from my project funding.

1. Probe Ultra-sonicator 2. TriboLab Universal Mechanical Testing 3. Dilatometer for thermal expansion 4. Thermal conductivity Rotatory evaporator 5. High energy ball mill 6. DSC/TGA 7. TMA 8. DMA etc.

Experience In Analytical & Other Techniques: Transmission Electron Microscope, Field

Emission Scanning Electron Microscope, Focus Ion Beam, Gas Injection System, X-Ray

Diffractometer, Single Crystal Diffractometer, Particle Size Analyzer, Photo-Luminesce, Light

Microscope, Physical Laser Deposition, Mechanical Testing, Thermal Analysis (DMA, TMA

DSC, DTA. TGA, Thermal Conductivity & Coefficient of Expansion, Wear Testing Etc.) Infrared

Spectroscopy, Raman Spectroscopy, Spark Plasma, Hot Press, Hot Isostatic Press,

Microwave Sintering, High Temperature Graphite Furnace, Induction, Arc, Radio Frequency

Furnaces and Metal Evaporator, Radiofrequency, Sputtering Etc.

3.3. Thesis Supervision at KFUPM

Student Name Department Level Role Status

Raja Muhammad Awais Khan

Mechanical Eng. Dept.

MS Co-Advisor

Completed

Co-Advisor

Moath Mohammed Al Malki


MS Co-Advisor

Completed

Co-Advisor

Mohamed Abdelmageed Mohamedzein


MS Co-Advisor

Completed

Hafiz Khurram Mechanical Eng. Dept.

MS Co-Advisor

Completed

Saleh Al Wohaibi Mechanical Eng. Dept.

MS Co-Advisor

Completed

Bilal Anjum Ahmad Mechanical Eng. Dept.

PhD. Co-Advisor Completed

9


4.1. Committee Work

Final year project (FYP) for BSc (Eng.): External Examiner and Internal Examiner at Punjab University, GIKI (Pakistan) continue for four years and over 100 students FYP were evaluated and oral exam were conducted.

For two years I was in-charge and conduct entry test at Islamabad (Pakistan) for GIKI where over 1500 candidates appeared

Involved in R&D work related to nanomaterials and consultancy projects related to quality evaluation, and processing, properties and characterization of engineering materials and their application for wind energy and power plants. I was involved in the quality assurance and accreditation of engineering programs and Outcome Based Assessment (OBA) at Pakistan Engineering Council forum to complement with the Washington Accord, from 2007 till 2010

4.2. External and Internal Examiner: MS and PhD Thesis Evaluation Committee at GIKI, Pakistan

Since 2007 to 2010, I was co-advise and/or external examiner for MS and PhD Thesis

4.3. Seminar and Workshop Attended

No.

Workshop Title

Place

Date

1 2 3 4

Workshop on High Resolution TEM Workshop on FESEM Workshop on FIB/FESEM Workshop on EBSD/EDXS

Khobar, Saudi Arabia Khobar, Saudi Arabia Brno, Czech Republic London, England

2013 2014 2014 2014

5

Chemical Safety and Security Workshop

KFUPM, Saudi Arabia

2015

6

Negotiation Skills for Managers

Khobar, , Saudi Arabia

2015

Beside above many other workshops and seminars attended from 1999.

4.4. Reviewed the Following Scientific Manuscripts for Journals

Worked as a reviewer for several reputed International journals from Elsevier, PJEAS, Optics and Laser Technology, AJSE. etc. Details given in (Appendix-3)

Section- 4: Professional and Community Service

10


4.5. Professional Affiliation

Pakistan Engineering Council, Professional Engineer

American Society of Materials, Member

Materials Research Society, Member

Appendix 1

Table- 2.3. A

Publication

Refereed Journal Publication

S. No.

Publication Details

Journal Name, Type

and Impact factor

Role and

Contribution

Research Scientist - II & III

J1 HM Irshad, AS Hakeem, BA Ahmed, S Ali, S Ali, S Ali, MA Ehsan, T Laoui Effect of Ni content and Al2O3 particle size on the thermal and mechanical properties of Al2O3/Ni composites prepared by spark plasma sintering

International Journal of Refractory Metals and Hard Materials

ISI, 2.5

Critical Analyses, Review, Editing and Quality Enhancement

J2 MA Ehsan, MA Aziz, A Rehman, AS Hakeem, MAA Qasem, SHA Ahmad Aerosol-Assisted Chemical Vapor Deposition of Silver Thin Film Electrodes for Electrochemical Detection of 2-Nitrophenol

Journal of The Electrochemical Society ISI, 3.2


J3 Rabia Naeem, Muhammad A Ehsan, Vickie McKee, Abbas S Hakeem, Muhammad Mazhar Photoelectrochemical investigations of CaTiO3-TiO2 composite electrodes developed from aerosol assisted chemical vapor deposition

Materials Science and Engineering B, ISI, 2. 5


J4 Kabeer Raza,Muhammad Usama Siddiqui, Abul Fazal M. Arif, Syed Sohail Akhtar, Abbas Saeed Hakeem Design and Development of Thermally Conductive Hybrid Nano-Composites in Polysulfone Matrix

Polymer Composites, ISI, 2.5


J5 Md. Abdul Aziz,* Demetrios Theleritis, Mohammod Oudah Al-Shehri, Muhammad Ibrar Ahmed, Muhammad Qamaruddin, Abbas Saeed Hakeem, Aasif Helal, and Mohammed Ameen Ahmed Qasem

Chemistry Select, ISI, 1.5


11


A simple and direct preparation of a substrate-free interconnected nanostructured carbon electrode from date palm leaflets for detecting hydroquinone

J6 Bilal Anjum Ahmed, Nabi B, Raja Muhammad Awais Khan, , Moath Al Malki, Fazal Ahmad Khalid, Tahar Laoui, Abbas Saeed Hakeem* Spark Plasma Sintering of Nano Sized Ca-α-Sialon Matrix Reinforced by cBN

International Ceramics, ISI, 2.76

Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement

J7 Raja Muhammad Awais Khan, Moath Mohammad Al Malki, Abbas Saeed Hakeem*, Tahar Laoui Synthesis of hard and tough SiC/α-SiAlON composite ceramics using nano-sized precursors and spark plasma sintering

International Ceramics, ISI, 2.76


J8 R Naeem, MA Ehsan, A Rehman, ZH Yamani, AS Hakeem, M Mazhar Single step aerosol assisted chemical vapor deposition of p–n Sn (ii) oxide–Ti (iv) oxide nanocomposite thin film electrodes for investigation of photoelectrochemical

New Journal of Chemistry, ISI, 3.3


J9 MA Ahmed Qasem, M Aziz, AS Hakeem, SA Onaizi Preparation of Nano-Co3O4 by Direct Thermal Decomposition of Cobalt (II) Nitrate Hexahydrate for Electrochemical Water Oxidation

Current Nanoscience ISI, 1.1


J10 Umer Mehmood, Mohammad Afzaal, Amir Al-Ahmed, Heather M. Yates and Abbas S. Hakeem Fluorine Doped Tin Oxide Surfaces vs. Power Conversion Efficiencies in Dye-Sensitised Solar Cells: A Move Towards 12% Efficient Solar Cells

Photovoltaics research and applications, ISI, 7.58


J11 BA Ahmed, AS Hakeem, T Laoui, M Al Malki, MA Ehsan, S Ali Low-temperature spark plasma sintering of calcium stabilized alpha sialon using nano-size aluminum nitride precursor, 2017

International Journal of Refractory Metals and Hard Materials ISI, 2.5


J12 U Mehmood, A Al-Ahmed, M Afzaal, AS Hakeem, SA Haladu Enhancement of the Photovoltaic Performance of a Dye-Sensitized Solar Cell by Cosensitizing, 2017

IEEE Journal of Photovoltaics ISI, 3.2


J13 BA Ahmed, AS Hakeem, T Laoui, RMA Khan, MM Al Malki, A Ul-Hamid Effect of precursor size on the structure and mechanical properties of calcium-stabilized sialon/cubic boron nitride nanocomposites, 2017

Journal of Alloys and Compounds ISI, 3.3


12


J14 MA Aziz, A El-Madkhoum, AS Hakeem, MN Shaikh, AU Rehman Effect of Mn precursors on the morphology and electrocatalytic activity toward water oxidation of micro-nanostructured MnO x films prepared by voltammetric depositi., 2017

Journal of Materials Science: Materials in Electronics ISI, 2.4


J15 T Kurniawan, O Muraza, AS Hakeem, IA Bakare, T Nishitoba, T Yokoi Selective Isomerization of n-Butane over Mordenite Nanoparticles Fabricated by a Sequential Ball Milling–Recrystallization–Dealumination Route, 2017

Energy & Fuels ISI, 3.1


J16 Geioushy, R.A., Khaled, M.M., Hakeem, A.S., Alhooshani, K. Graphene/ZnO/Cu2O electrocatalyst for selective conversion of CO2 into n-propanol, 2017

Electrochimica Acta ISI, 4.80


J17 Hafiz Muzammil Irshad, Bilal Anjum Ahmed, Muhammad Ali Ehsan, Tahir Irfan Khan, Tahar Laoui, Muhammad Rizwan Yousaf, Ahmed Ibrahim, Abbas Saeed Hakeem

Investigation of the structural and mechanical properties of micro-/nano-sized Al2O3 and cBN composites prepared by spark plasma sintering, 2017

Ceramics International ISI, 2.76


J18 Teguh K, Oki M, Abbas S. Hakeem, Adnan

M. Al-Amer Mechanochemical route and recrystallization strategy to fabricate MOR nanoparticles from natural zeolites, 2017

Crystal Growth & Design ISI, 4.43


J19 Teguh K, Oki M, Koji M, Abbas S. Hakeem, Yuichiro H, Adnan M. Al-Amer, Norikazu N. Conversion of dimethyl ether to olefins over nanosized mordenite fabricated by a combined high-energy ball milling with recrystallization, 2017

Industrial Engineering Chemistry Research ISI, 2.59


J20 Al Malki, M.M., Khan, R.M.A., Hakeem, A.S., Hampshire, S., Laoui, T. Effect of Al metal precursor on the phase formation and mechanical properties of fine-grained SiAlON ceramics prepared by spark plasma sintering, 2017

Journal of the European Ceramic Society ISI, 2.93

Writing Critical Parts, Critical Analyses, Review, Editing and Quality Enhancement

J21 Akhtar, S.S., Kareem, L.T., Arif, A.F.M., Siddiqui, M.U., Hakeem, A.S. Development of a ceramic-based composite for direct bonded copper substrate, 2017

Ceramics International ISI, 2.76


J22 Said, S.M., Bashir, M.B.A., Sabri, M.F.M., Hakeem A. S., Ghazali, N.N.N., Elsheikh, M.H

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science


13


Enhancement of Thermoelectric Behavior of La0.5Co4Sb12−xTex Skutterudite Materials, 2017

ISI, 1.75

J23 Akhtar, S.S., Siddiqui, M.U., Kabeer, R., Hakeem, A.S., Kareem, L., Arif, A.F. A computational and experimental study on the effective properties of Al2O3-Ni composites, 2017

International Journal of Applied Ceramic Technology ISI, 1.53


J24 Ehsan, M.A., Naeem, R., McKee, V., Hakeem, A.S., Mazhar, M. MgTi2O5 thin films from single molecular precursor for photoelectrochemical water splitting, 2017

Solar Energy Materials and Solar Cells ISI, 4.73


J25 Mehmood, U., Afzaal, M., Al-Ahmed, A. S. Hakeem,Ali, H., Al-Sulaiman, F.A Transparent Conductive Oxide Films for High-Performance Dye-Sensitized Solar Cells, 2017

IEEE Journal of Photovoltaics ISI, 3.74


J26 Geioushy, R.A., Khaled, M.M., Hakeem, A.S., Alhooshani, K., Basheer, C. High efficiency graphene/Cu2O electrode for the electrochemical reduction of carbon dioxide to ethanol, 2017

Journal of Electroanalytical Chemistry ISI, 2.73


J26 Khan, R.M.A., Al Malki, M.M., Hakeem, A.S., Ehsan, M.A., Laoui, T. Development of a single-phase Ca-α-SiAlON ceramic from nanosized precursors using spark plasma sintering, 2016

Materials Science and Engineering A ISI, 2.65


J27 IA Bakare, O Muraza, SA Ganiyu, AS Hakeem, ZH Yamani, AMJ Al-Amer

Synthesis of zeolite–magadiite composites: Effects of co-solvent and aluminum source; 2016

Particuology ISI, 2.11


J28 Muhammad Ali Ehsan, Rabia Naeem, Hamid Khaledi,c Manzar Sohail, Abbas Saeed Hakeem, Muhammad Mazhar

Fabrication of CoTiO3-TiO2 composite Films from Heterobimetallic Single Source Precursor for Electrochemical Sensing of Dopamine; 2016

Dalton Transactions ISI, 4.19

Review, Editing and Quality Enhancement

J29 Muhammad Ali Ehsan, Rabia Naeem, Vickie McKee, Abbas Hakeem Saeed,

Alagarsamy Pandikumar, Nay Ming Huang and Muhammad Mazhar Electrochemical sensing of nitrite using a copper–titanium oxide composite derived from a hexanuclear complex, 2016

RSC Advances, ISI, 3.84


J30 FO Bakare, W Mahfoz, MA Aziz, MN Shaikh, AS Hakeem, M Oyama Preparation and electrochemical properties of a gallium-doped zinc oxide electrode

Journal of The Electrochemical Society, ISI, 3.26


14


decorated with densely gathered palladium nanoparticles 2016

J31 A Qurashi, JA Rather, T Yamazaki, M Sohail, K De Wael, B Merzougui, A S Hakeem Swift electrochemical detection of paraben an endocrine disruptor by In2O3 nanobricks 2015

Sensors and Actuators B: Chemical, ISI, 3.66


J32 A Hachimi, B Merzougui, A Hakeem, T Laoui, GM Swain, Q Chang Synthesis of Nitrogen-Doped Carbon Nanotubes Using Injection-Vertical Chemical Vapor Deposition: Effects of Synthesis Parameters on the Nitrogen Content 2015

Journal of Nanomaterials, ISI, 1.65


J33 N Saheb, M Shahzeb Khan, AS Hakeem

Effect of Processing on Mechanically Alloyed and Spark Plasma Sintered Al-Al2O3 Nanocomposites 2015



J34 M Huang, Muhammad Ali Ehsan, Abbas Saeed Hakeem, Hamid Khaledi

Fabrication of CuO-1.5ZrO2 composite thin film, from heteronuclear molecular complex and its electrocatalytic activity towards methanol oxidation 2015

Rsc Advances, ISI, 3.84


J35 MN Shaikh, M Bououdina, AA Jimoh, MA Aziz, A Helal, AS Hakeem, Zain H Yamani, Tae-Jeong Kim The rhodium complex of bis (diphenylphosphinomethyl) dopamine-coated magnetic nanoparticles as an efficient and reusable catalyst for hydroformylation of olefins 2015

New Journal of Chemistry, ISI, 3.08


J36 SA Ganiyu, O Muraza, AS Hakeem, K Alhooshani, MA Atieh Carbon nanostructures grown on 3D silicon carbide foams: Role of intermediate silica layer and metal growth 2014

Chemical Engineering Journal, ISI, 2.03


J37 A Hafeezullah, ZH Yamani, J Iqbal, A Qurashi, A Hakeem

Rapid sonochemical synthesis of In2O3 nanoparticles their doping optical, electrical and hydrogen gas sensing properties 2014

Journal of Alloys and Compounds, ISI, 3.06

Critical Analyses, Review,

J38 Development and processing of SiAlON nano-ceramics by Spark Plasma Sintering AS Hakeem, RMA Khan, MM Al-Malki, F Patel, AI Bakare, S Ali 2014

Advances in Science and Technology

Main Author, Concept, Work Planning, Partial Writing, Model

15


Development and Data Analyses, Presentation of Results

J39 M Qamar, B Merzougui, D Anjum, AS Hakeem, ZH Yamani

Synthesis and photocatalytic activity of mesoporous nanocrystalline Fe-doped titanium dioxide 2014

Catalysis Today, ISI, 3.89


J40 N Bakhsh, FA Khalid, AS Hakeem, T Laoui Dispersion of Carbon Nanotubes in Alumina using a Novel Mixing Technique and Spark Plasma Sintering of the Nanocomposites with Improved Fracture Toughness. 2014

Advances in Science & Technology

Partial Writing, Model Development and Data Analyses, Presentation of Results

J41 N Bakhsh, FA Khalid, AS Hakeem Effect of sintering temperature on densification and mechanical properties of pressureless sintered CNT-alumina nanocomposites 2013

Materials Science and Engineering


J42 AS Hakeem, S Ali, B Jonson Preparation and properties of mixed La–Pr silicate oxynitride glasses 2013

Journal of Non-Crystalline Solids, ISI, 1.76

Main Author, Concept, Work Planning, Partial Writing, Model Development and Data Analyses, Presentation of Results

J43 N Al-Aqeeli, K Abdullahi, AS Hakeem, C

Suryanarayana, T Laoui Synthesis, characterisation and mechanical properties of SiC reinforced Al based nanocomposites processed by MA and SPS 2013

Powder Metallurgy, ISI, 0.77

Co-author, Parts, Critical Analyses, Review

J44 AM Al-Qutub, A Khalil, N Saheb, AS Hakeem

Wear and friction behavior of Al6061 alloy reinforced with carbon nanotubes 2013

Wear, ISI, 1,91 Critical Analyses, Review

J45 N Saheb, AS Hakeem, A Khalil, N Al-Aqeeli,

T Laoui Synthesis and spark plasma sintering of Al-Mg-Zr alloys 2013

Journal of Central South University, ISI, 0.52

Critical Analyses, Review

J46 N Saheb, A Khalil, AS Hakeem, T Laoui, N Al-Aqeeli, AM Al-Qutub Age Hardening Behavior of Carbon Nanotube Reinforced Aluminum Nanocomposites 2012

Journal of Nano Research, ISI, 0.56


J47 OB Sohail, PA Sreekumar, SK De, MJ Khan, A Hakeem, AA Alshaiban



16


Thermal effect of ceramic nanofiller aluminium nitride on polyethylene properties 2012

J48 N Saheb, Z Iqbal, A Khalil, AS Hakeem, N Al

Aqeeli, T Laoui, A Al-Qutub Spark plasma sintering of metals and metal matrix nanocomposites: a review 2012



J49 A Khalil, AS Hakeem, N Saheb Optimization of process parameters in spark plasma sintering Al6061 and Al2124 aluminum alloys 2011

Advanced Materials Research


J50 T Laoui, AS Hakeem, K Abdullahi, N Saheb, N Al Aqeeli Spark Plasma Sintering of mixed and milled WC-Co micro-/nano-powders 2011

Advanced Materials Research


J51 T Laoui, AS Hakeem, K Abdullahi, N Saheb, N Al-Aqeeli Effect of Consolidation Mechanism on the Properties of Nanostructured WC-6, 9, 12 wt% Co Hardmetals 2011

Nano and Micro Materials, Devices and Systems; Microsystems Integration. ASME

Writing, Critical Analyses, Review

J52 E Leonova, AS Hakeem, K Jansson, B Stevensson, Z Shen, J Grins Nitrogen-rich La–Si–Al–O–N oxynitride glass structures probed by solid state NMR 2008

Journal of Non-Crystalline Solids, ISI, 2.6

Co-author, Parts, Critical Analyses, Review

During PhD

J53 AS Hakeem, J Grins, S Esmaeilzadeh

La-Si-ON glasses: Part II: Vickers hardness and refractive index 2007

Journal of the European Ceramic Society, ISI, 3.3


J54

AS Hakeem, J Grins, S Esmaeilzadeh La–Si–O–N glasses: Part I. Extension of the glass forming region 2007



J55 AS Hakeem, R Daucé, E Leonova, M Edén,

Z Shen, J Grins Silicate glasses with unprecedented high nitrogen and electropositive metal contents obtained by using metals as precursors 2005

Advanced Materials, ISI, 18.96

Main Author, Concept, Work Planning, Partial Writing, Model Development and Data Analyses, Presentation of

17


Results https://www.researchgate.net/profile/Abbas_Hakeem

https://scholar.google.com/citations?hl=en&user=qchbN2cAAAAJ&view_op=list_works&sortby=pubdate&cstart=20&p

agesize=20

https://www.scopus.com/authid/detail.uri?authorId=8868835300

Table-2.3. B

Papers under Review for Publication in Refereed ISI Journals

S.

No.

Paper Details

Journal/Type/Impact

factor

Role and

Contribution

URJ1 Taha Waqar, Syed Sohail Akhtar, Abul Fazal M. Arif, Abbas Saeed Hakeem Design and Development of ceramic-based composites with tailored properties for cutting tool inserts

Under minor revision; International Ceramics, ISI, 2.76


URJ2 Saleh Wohaibi, Tahar Laoui, M. Abdul Samad, Abbas Saeed Hakeem, Akeem Yusuf Adesina, Faheemuddin Patel Tribological Characterization of Micron-/Nano-sized WC - 9%Co Cemented Carbides Prepared by Spark Plasma Sintering at Elevated Temperatures

Powder Technology, ISI, 2.6


URJ3 Bilal Anjum Ahmed, Abbas Saeed Hakeem, Tahar Laoui Development of calcium stabilized nitrogen rich alpha sialon ceramics along the Si3N4-1/2Ca3N2:3AlN line using spark plasma sintering



URJ4 Teguh Kurniawan Kurniawan, Oki Muraza, Abbas S Hakeem, Idris A Bakare, Muhammad Qamaruddin, Adnan M Al-Amer, High-energy ball milling attritor and hydrothermal recrystallization to prepare mordenite nanoparticles: the effects of the relative weights of the balls and water

Powder Technology, ISI, 2.6


URJ5 Moath Mohammad Al Malki, Abbas Saeed Hakeem*, Raja Muhammad Awais, Muhammad Ali Ehsan, Tahar Laoui The Effects Of The Nano Precursors On The Phase Formation And The Shrinkage Behavior Of Ca-Α-Sialon Ceramics, Synthesized By Spark Plasma Sintering

Under minor revision; International Ceramics, ISI, 2.76


URJ6 Tribological behaviour and performance of alumina-based nanocomposites reinforced with uncoated and Ni-coated cubic boron nitride for tool applications

Wear, ISI, 2.5


https://www.researchgate.net/profile/Abbas_Hakeem

https://scholar.google.com/citations?hl=en&user=qchbN2cAAAAJ&view_op=list_works&sortby=pubdate&cstart=20&pagesize=20

https://scholar.google.com/citations?hl=en&user=qchbN2cAAAAJ&view_op=list_works&sortby=pubdate&cstart=20&pagesize=20

https://www.scopus.com/authid/detail.uri?authorId=8868835300

18


Table: 2.3. C

International Conferences Details

S.

No.

Conference Details

Paper details

During Research Scientist-II-III

C1 Materials Challenges in Alternative and Renewable Energy, Clearwater, FL, USA, 2016

Metal Oxide Thin Films from Single Source Precursor for Technological Applications, M. A. Ehsan, A. Hakeem, T. Laoui, Z. Abdallah Yamani

C2 International Conference and Exhibition on Materials Chemistry, Valencia, Spain, 2016

Sialon Nano-Composites Matrix Reinforced by Cubic Boron Nitride prepared by using Spark Plasma Sintering Abbas Saeed Hakeem, Bilal Anjum Ahmed,

Akolade Idris Bakare, Ibrahim Ahmed Ali & Tahar Laoui

C3 2nd World Congress and Expo on Nanotechnology and Material Science, April 04-06, Dubai, UAE, 2016

Cubic Boron Nitride Reinforced Sialon Nano-Composites by Spark Plasma Sintering Abbas Saeed Hakeem, Bilal Anjum Ahmed,

Akolade Idris Bakare, Ibrahim Ahmed Ali, Muhammad Ehsan Ali & Tahar Laoui

C4 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, 2015

Effect of Al metal precursor on the mechanical properties of SiAlON nano-ceramic, prepared by spark plasma sintering Moath Mohammad Al Malki, Raja Muhammad Awais Khan , Abbas Saeed Hakeem, Stuart Hampshire, Tahar Laoui

C5 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, 2015

Processing of Cubic Boron Nitride reinforced SiAlON Nano-Composites by Spark Plasma Sintering Abbas Saeed Hakeem, Raja Muhammad Awais Khan, Moath Mohammed Al Malki, Akolade Idris Bakare, Sadaqat Ali, Tahar Laoui

C6 International Conference on Nano- Electronic Technology Devices and Materials, 2015

Synthesis of MnSil.75-xSex (x=0 and 0.025) by Mechanical Alloying and Spark Plasma Sintering M.B.A. Bashir, M.F.M. Sabri, S.M. Said, D.A. Shnawah, A.S. Hakeem, A.l. Bakare and M.H.

Elsheikh

C7 13th International Conference on Modern Materials and Technologies, Tuscany, Italy, 2014

Mechanical characterization of pressureless sintered CNTs-reinforced alumina nanocomposites N. Bakhsh, F.A. Khalid, A. S. Hakeem

C8 13th International Conference on Modern Materials and Technologies, Tuscany, Italy, 2014

Development and processing of SiAlON nano-ceramics by Spark Plasma Sintering Abbas Saeed Hakeem, Tahar Laoui

C9 European Materials Research Society, EMRS, Strasbourg, France, 2013

Activity and Durability of Fe-N-Multiwalled Carbon Nanotubes as Nanocomposite Catalyst for ORR in Acidic and Alkaline Mediums,

19


A Hachimi, B Merzougui, A Hakeem,

C10 13th International Symposium on Advanced Materials, (ISAM), Pakistan, 2013

Densification and characterization of pressureless sintered CNTs-reinforced alumina nanocomposites N. Bakhsh,, F.A. Khalid, A. S. Hakeem

C11 Applied Sciences and Technology (IBCAST), 10th International Bhurban Conference, Pakistan, 2013

Comparison of Properties of CNTs Reinforced Alumina Nanocomposites Produced by Conventional and Spark Plasma Sintering N. Bakhsh, F. Ahmad Khalid, A. S. Hakeem

C12 ECCM15th European Conference On Composite Materials, Venice, Italy, 24-28 June 2012

Carbon nanotube reinforced Al 6061 and Al 2124 nanocomposites, N. Saheb, A. Khalil, A. S. Hakeem, N. Al-Aqeeli, T. Laoui

C13

2nd Saudi International Nanotechnology Conference2SINC, KSA, 2012

, A Pt-free catalyst based on metal-nitride-carbide nanocomposites for oxygen reduction reaction (ORR) Abdouelilah Hachimi, Belabbes Merzougui, Abbas Hakeem, Akinpelu Akeem, Bukola Saheed

C14

International Design Engineering Technical, ASME, USA, 2011

Effect Of Consolidation Mechanism On The Properties Of Nanostructured Wc-6, 9, 12 Wt%Co Hardmetals, Tahar Laoui, Abbas Saeed Hakeem, Kachalla Abdullahi , Nouari Saheb And Nasser Al-Aqeeli,

During PhD & before

C15 10th International Conference and Exhibition of the European Ceramic Society, Berlin, Germany, 2007

Nitrogen rich silicate glasses: synthesis, structure, and physical properties A. S. Hakeem, A. Sharafat, E. Leonova, A. Pouya, J. Grins, M. Edén, Z. Shen and S. Esmaeilzadeh

C16 Eighth ESG Conference with the Annual Meetings of the ICG and SGT, Sunderland, UK, 2006

Glass formation and crystallization in Ca-Si-O-N system Ali Sharafat, Abbas S. Hakeem, Jekabs Grins, Saeid Esmaeilzadeh

C17 47th Rocky mountain, Conf. on Analytical Chemistry, DENVER, Colorado, USA, 2005

Solid State NMR Study of Oxynitride Glasses of the Ca-Si-O-N, E. Leonova, A. S. Hakeem, R. Dauché, A. Kaikkonen, Z. Shen, J. Grins, S. Esmaeilzadeh, M. Edén

C18 15th International Congress on electron Microscopy, Durban South Africa, 2003

On the retention of austenite in lath martensite in steels In A. S. Hakeem, D.V. Edmonds, C. Hammond

Appendix 3

List of selected reviewed manuscript:

S. No.

Publication Title

Few Selected Journal Name

20


Year of

Reviewed

R1 Influence of an

aqueous/ethanolic solution on

the structural and electrical

properties of

polycrystalline ZnS films

AJSE

2012

R2 Evaluating the factors affecting

corrosive and abrasive wear of

grinding media in wet

grinding of copper sulfide

minerals

AJSE

2012

R3 Investigation of alkali cation

effects on elastic properties and

structure of 7056 glass

AJSE

2012

R4 Effects of Pb and Tl on

microstructures Properties of the

Al-40 %Zn alloy

AJSE

2013

R5 Investigation of surface

roughness and tool life in turning

of AISI D6 cold work tool

Steel

AJSE

2013

R6 Development of response -

dilution maps for the super

duplex stainless steel cladding

deposited by FCAW

AJSE

2013

R7 Optimization of the

Manufacturing Parameters of

Honeycomb Composite

Sandwich Structures to Achieve

Maximum Mechanical Strength

for Aerospace Application

ICASE

2013

R8 Failure Analysis of a

Compressed natural Gas Storage

Cylinder

PJEAS

2013

R9 Dielectric behavior of fabricated

Zinc Chromate Spinel ZnCr2O4

PJEAS 2013

R10 A Study on Drilling of AISI

304L Stainless Steel with

Nanocomposite Coated Drill

Tools

AJSE

2014

R11 A Survey of Low-Power

Integrated Circuit Design

JEAS 2015

R12 Thermal analysis and thermal

stability of Sb-V2O5-TeO2

semiconducting oxide glasses

Measurement (MEAS)

2015

R13 Interface diffusion reaction and

mechanical characterization of

316L stainless steel -

hydroxyapatite functionally

graded materials for joint

prostheses

Ceramics International

2015

21


R14 Indentation and deformation

behavior of FeCo-based bulk

metallic glass alloys

Materials Science &

Engineering A

2015

R15 Simultaneous improvement in

the strength and corrosion

resistance of Al via high-energy

ball milling and Cr alloying

Materials and Design

2015

R16 Corrosion inhibition of SAE

1018 carbon steel in H2S and

HCl solutions by lemon verbena

leaves extract

Measurement

2016

R17 Growth and characterization of

butyl 4-hydroxybenzoate single

crystal by vertical Bridgman

technique for third order

nonlinear optical applications

Optics and Laser

Technology

2016

R18 Hybrid Power Analysis

Approach for Electronic System

Design

JEAS

2016

R19

Effect of La inoculation on

composition, content, granularity

and

mechanical properties of in-situ

Al-30wt%Mg2Si Composite

Materials Science &

Engineering A

2017

R20 Fabrication of a high strength

ultra-fine grained Al-Mg-SiC

nanocomposite by multi-step

friction-stir processing

Materials Science &

Engineering A

2017

R21 Esterification process catalyzed

by ZSM-5 Zeolite synthesized

via modified hydrothermal

method

Biomass and Bioenergy

2017

R22 Development of

Inorganic/Organic

Nanocomposite Thin Film for

Room Temperature LPG Sensor

Measurement 2017

R23 A comparative study on

machinability of cryo-treated

and peak aged 15Cr-5Ni

precipitation hardenable stainless

steel

Measurement 2017

22


section- 1: qualification and experienceiciea.cumhuriyet.edu.tr/images/abass.pdf · dossier of dr....

Documents