Secrets for Passing Cisco 642-999 Exam Successfully and Effectively

Required Exams:The exams required to get CCNP Data Center Certification are:

• 642-999 DCUCI: Implementing Cisco Data Center Unified Computing (DCUCI)

• 642-997 DCUFI: Implementing Cisco Data Center Unified Fabric (DCUFI)

AND

• 642-998 DCUCD: Designing Cisco Data Center Unified Computing (DCUCD)

• 642-996 DCUFD: Designing Cisco Data Center Unified Fabric (DCUFD)

OR

• 642-035 DCUCT: Troubleshooting Cisco Data Center Unified Computing (DCUCT)

• 642-980 DCUFT: Troubleshooting Cisco Data Center Unified Fabric (DCUFT)

Intended Audience for this Certification:This certification is best for services and technology architects, design engineers and implementation engineers who perform data center design, installation and maintenance.

Prerequisites:

As specified by Cisco, the candidate must have CCNA Data Center or CCIE certification.

Facts about Exams:642-999 DCUCI

• Time Allowed - 90 Minutes• No. of Questions - 65-75• Available Languages - English and Japanese

642-997 DCUFI

• Time Allowed - 90 Minutes• No. of Questions - 65-75• Available Languages - English and Japanese

Facts about Exams:642-998 DCUCD

• Time Allowed - 90 Minutes• No. of Questions - 65-75• Available Languages - English and Japanese

642-996 DCUFD

• Time Allowed - 90 Minutes• No. of Questions - 65-75• Available Languages - English and Japanese

Facts about Exams:642-035 DCUCT

• Time Allowed - 90 Minutes• No. of Questions - 65-75• Available Languages - English and Japanese

642-980 DCUFT

• Time Allowed - 90 Minutes• No. of Questions - 65-75• Available Languages - English and Japanese

Demo Questions:Question: 1 When upgrading a standalone Cisco UCS C-Series server, which method is correct? A. direct upgrade on all componentsB. Cisco Hardware Upgrade UtilityC. Cisco Host Upgrade UtilityD. Cisco Server Upgrade Utility Answer: C

Demo Questions:Question: 2 In a standalone Cisco UCS C-Series server, which recommendations can be used to upgrade the BIOS? A. Cisco IMCB. Cisco UCS ManagerC. iFlash32 UtilityD. Flash ROM UtilityF. EFI InterfaceF. Cisco Host Upgrade UtilityG. USB Flash Utility Answer: F

Demo Questions:Question: 3 What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS C-Series server? A. 'Shared LOM' NIC mode with 'Active-active' NIC redundancy and DHCP enabledB. 'Shared LOM' NIC mode with 'Active-standby' NIC redundancy and DHCP enabledC. 'Dedicated' NIC mode with 'Active-standby' NIC redundancy DHCP disabledD. 'Dedicated' NIC mode with 'None' NIC redundancy and DHCP enabledF. 'Cisco Card' NIC mode with 'Active-active' NIC redundancy and DHCP enabled Answer: D

Demo Questions:Question: 4 Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server? A. the ports on an installed Cisco network adapter cardB. the two 1-Gb Ethernet portsC. the two 10/100 management portsD. the two 10/100 management ports, but each port has a default setting Answer: B

Demo Questions:Question: 5 Which NIC redundancy modes allow the LOMs to be discovered by the operating system or hypervisor? A. Dedicated modeB. Active/ActiveC. Active/StandbyD. Cisco Card Mode Answer: A

For Preparation & Discussion Cisco 642-999 Examhttps://www.justcerts.com/cisco/642-999-practice-questions.html

Extra 15% Discount Coupon Code: JC2016