A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

• Extremely Late Model • Slitting Lines• Banding Line• Overhead Bridge Cranes• Quality Inspection• Railcar Mover• Facilities Equipment• Real Estate Available

BIDS DUE: September 28th

Romulus, Michigan

State-of-the-Art Coil Slitting Facility

SEALED BID AUCTION

To schedule an auction, please call Hilco Industrial  at 1-877-37-HIlCo (44526)2

SEALED BID AUCTIONHilcoTM Industrial

2010

BIDS DUE MONDAY, SEPTEMBER 28TH

PrEvIEwMONDAY – THURSDAY, SEPTEMBER 21ST- 24TH

8AM TO 4PM LOcAL TIME OR EARLIER BY APPOINTMENT

FOR MORE INFORMATION, CONTACT KEN PLANET AT +1 616-420-1516 OR EMAIL KPLANET@HILCOGLOBAL.COM

SLITTING LINES

36320 EurEka rd. romulus, mI 48174

View Videos of Lines Under Power: www.hilcoind.com/LeeSteel

For more information, please visit us on the web at www.hilcoind.com/leesteel 3

SLITTING LINES

Visit Our Website for Complete Bidding Procedureswww.hilcoind.com/LeeSteel

BIDS DUE SEPTEMBER 28TH

SLITTING LINES1 – BRANER MODEL (LINE 72) 60,000 LB X 72" X .250"

CAPACITY SLITTING LINE (2010), Material Data: LowCarbon Steel Coated & Bare Steel Coil, Prime ASTM QualitySpecifications, Max Yield Strength 50,000 PSI, Max ShearStrength 50,000 PSI, Strip Thickness Min .015" – Max .250"Coil Specifications: Entry Width 10" – 72", Entry OD Max72", Entry ID 20" – 24", Exit Width Max 72", Exit ID 20" & 24"(with Filler) Operation Modes & Speeds: Single Loop DriveSlitting: – 0 – 1,000 FPM High Gear Tight Line "Push/Pull"Slitting: 0 – 1,000 FPM High Gear / 0 – 330 FPM Low GearTight Line Pull Through Slitting: 0 – 1,000 FPM High Gear /0 – 330 FPM Low Gear Slitting Capacities: Tight Line – 5 Cutsat .250" / 20 Cuts at .015", Single Loop – 11 Cuts @ .090" /20 Cuts at .015" Travelling Coil Car #CC-60K, S/N EH-12638 Stationary Mandrel Uncoiler #60K x 72 x 20"/24", S/NUC-12639, Capacity 60,000 Lbs, Coil Width 72", Coil ID 20"– 24", Hydraulic Expansion Crop Shear & Advanced ModelHET400 Thickness Gauge Advanced Thickness Gauge withConsole Control Edge Table S/N ET-12641 Slitter #9" x 72"x 2HD x 150 HP Two-Head Slitter, S/N SL-12643, ArborDiameter 9", 150 HP Baldor Reliance DC Drive Two (2)Scrap Rewinders, S/N SW-12644 FAR & SW-12644 NEARSupport Table Tension Stand S/N TS-12646 Leveler S/N EH-12808, Eight Powered Adjustment Rolls Exit Crop Shear 72"x .250", S/N EU-12809 & EU-12648 Recoiler with 250 HPBaldor Reliance Inverter Duty Drive, Hydraulic Push-OffTravelling Coil Car S/N EH-10284, Capacity 60,000 Lbs,Power Clamp Roll Operator's Console Control AssortedBlades & Spacers Betenbender 24" Hydraulic Shear, 24" Back Gauge

1 – BRANER MODEL (LINE 73) 60,000 LB X 72" X .250"CAPACITY SLITTING LINE (2002), Material Data: ColdRolled, Coated & Hot Rolled P&O Steel, Material Quality:ASTM A568 or Better, Max Tensile Strength 100,000 PSI,Max Shear Strength 50,000 & 80,000 PSI, Strip ThicknessMin .025" – Max .250" Right to Left Operation CoilSpecifications: Entry Width 12" – 72", Entry OD 28" – 72",Entry ID 20" – 24", Exit Width 28" – 72", Exit ID 20" & 24"(with Fillers) Operation Modes & Speeds: Full Loop Slitting:-0 – 1,000 FPM, Constant Push/Pull Slitting: 0 – 1,000 FPM,Constant Pull Through Slitting: 0 – 1,000 FPM High Gear(Base) / 0 – 333 FPM Low Gear (Base) Slitting Capacities:50,000 PSI Shear Strength – 9 Cuts at .250" / 27 Cuts at.025", 80,000 PSI Shear Strength – 5 Cuts @ .250" / 17 Cutsat .025" Travelling Coil Car #60K x 72, S/N LH-10265Mandrel Uncoiler #60K x 72, S/N UC-10266, 25 HPHydraulic Power Unit, Powered Hold Down Arm OutboardSupport Arm, S/N UC-10267 Entry Table, S/N ET-10268Advanced #HET400 Thickness Gauge with Console ControlTwo Head Slitter #72x2x9.5000, S/N SL-10270, ArborDiameter 9.5", 200 HP DC Drive Two (2) Scrap Winders, S/N SW-10272-A & SW-10272-B Leveler Exit Crop Shear,S/N EU-10278 Recoiler, S/N RC-10282, Support Arm, 300HP DC Drive, Hydraulic Push Off Travelling Coil Car,Capacity 60,000 Lbs Operator's Console Control MiscKnives & Spacers

1 – BRANER 60,000 LB CAPACITY FOUR ARM TURNSTILE,S/N H-12803 (2010), Turnstile Runs with Slitting LInes 72 &73, Floor Standing, Pad Width 55", Coil Width 72"

BANDING LINE • BRIDGE CRANES • CRANE ACCESSORIES • COIL HANDLING

To schedule an auction, please call Hilco Industrial  at 1-877-37-HIlCo (44526)4

2013

2013

2011

1 – BRANER COIL BANDING LINE (2011), Braner Traveling Downender with Control Console, Braner 72" Coil Loading Table, S/N PC-13725, Braner Rotary 90 Degree RollerConveyor, S/N EH-13482, Approx. 40' Length x 72" Roller Conveyor, Dalex #G1 203L (W) Control, Nr. ZZB/N-07052, Amca Automatic Bander, Amca Gantry Type Roll Handlerwith Amca Push Arm and 6 Position Rotary Load Table, Exit Conveyor approx. 25'

BANDING LINE

BRIDGE CRANES2 – ZENAR 35 TON DOUBLE GIRDER TOP RUNNING BRIDGE

CRANES, S/Ns 8532, 8550 (Both 2013), Span 103' 8",Class D, Main Hoist Capacity 35 Ton, Type HD16, Max Lift30', Hoist Speed 23 FPM (Full Load – Vector) / 35 FPM (No Load), Trolley Speed 107 FPM (Var Freq), Bridge Speed346 FPM (Var Freq), Cab Controlled, NOTE: Coil GrabAttachment and Scale are not Included

CRANE ACCESSORIES / COIL HANDLING1 – BRANER 15,000 LB X 36" COIL UPENDER, S/N CT-13913

(2011), 20' x 15,000 Lb Capacity Conveyor, S/N PC-13915 3 – ZENAR 32 TON CAPACITY ROTATING COIL GRABS, S/Ns

8550, B1012, B1013 (All 2013), Coil Width 25" to 6' 2", MaxOD 72", Designed for 20" – 24" ID Coil, Rotate Speed1.59 RPM, Grab Speed 327.6 IPM, Rotation is 330 Degreeswith Positive Stops

2 – BRADLEY 60,000 LB CAPACITY COIL GRABS, S/Ns 93121,93196, Coil Width Nominal 30" – 72", Motorized Adjustment,Weight 5,410 Lbs

1 – BRADLEY 18,000 LB CAPACITY ID COIL GRAB, S/N 12157,ID Range 20" – 24", ASME BTH-1 Design Category B / ServiceClass 2, Storage Stand

2 – COIL CARS

Visit Our Website for Complete Bidding Procedureswww.hilcoind.com/LeeSteel

BIDS DUE SEPTEMBER 28TH

2013

CNC VERTICAL MACHINING CENTER • RAIL CAR MOVERINSPECTION / METALLUGICAL LAB • TRUCKS • ROLLING STOCK

For more information, please visit us on the web at www.hilcoind.com/leesteel 5

2013 2013

2014

ROLLING STOCK2 – YALE MODEL GLC120VXNGAV086 12,000 LB CAPACITY VERACITOR 120VX

FORKLIFT TRUCKS, S/Ns F818V01564K, F818V01561K (Both 2013), LPG Type,Sideshift Fork Positioner, Forks 48"/54”, Two-Stage Mast, Max Lift 114", Front Tires22x12x16 Cushion, Rear Tires 18x8x12 1/8 Cushion, Meter Low as 1,873 Hours,Powershift 1 Speed Transmission, Note: LPG Tank not Included

1 – TENNANT MODEL T20ECH20 RIDING TYPE SWEEPER & FLOOR SCRUBBER,S/N T20-5137 (2013), LPG Type, Hours Meter 462, NOTE: No LPG Tank

TRUCKS / SUV1 – FORD MODEL F-350 LARIAT SUPER DUTY PICKUP TRUCK, VIN

1FTWW33P96EA53455 (2006), 4-Wheel Drive, Odometer: 44,945 Miles, Dual RearTires, Crew Cab, Automatic Transmission, Power Stroke V8 Turbo Diesel Engine, "TheBoss" Snow Plow, S/N 74209, Plow Width 8' 2", Plow Joystick Control

1 – FORD MODEL F-150 4X4 PICKUP TRUCK, S/N 1FTFX1ETXDFA52348 (2013),4-Wheel Drive, Super Cab, Odometer 38,302.9 Miles, Automatic Transmission, 3.5 LEcoBoost Gasoline Engine, GVWR 7,200 Lbs

1 – FORD MODEL EDGE SEL SPORT UTILITY VEHICLE, VIN 2FMDK3JC9DBA40261(2013), Odometer: 45,089.4 Miles, Four Door, Automatic Transmission, 3.5 L V-6 GasolineEngine, Dual Zone Electronic Air Conditioning

CNC VERTICAL MACHINING CENTER1 – HURCO VM1 3-AXIS CNC VERTICAL MACHINING

CENTER, S/N VM1-06013054BEA / H-V10555 (2004),Table 14" x 30", Travels: X – 660 mm (26"), Y – 356 mm(14"), Z – 457 mm (18"), 16-Position Automatic ToolChanger, Motor 11 KW, Spindle Speeds 8,000 RPM Max,Dual Arm Tool Changer, Hurco Max CNC Control, YaskawaVari Speed Adaptive Vector Control

INSPECTION / METALLURGICAL LAB1 – INSTRON MODEL 5582 100 KN CAPACITY TENSILE

TESTER, S/N 5582P6661 (2003), (Two) Instron Pneumatic#2716-118 Wedge Action Grips

1 – WILSON ROCKWELL MODEL 2000 DIGITAL HARDNESSTESTER, S/N R2000P6692

1 – ARL MODEL 2460 SPECTROMETER, S/N 327 (1994)

RAIL CAR MOVER1 – TRACKMOBILE MODEL HERCULES RAIL CAR MOVER,

S/N LGN-993860813 (2014), Max. Tractive Effort 44,718 –45,995 Lb, Cummins QSB 6.7 L Turbo Charge DieselEngine, HP 160 (KW 119), Engine #73532596, Engine SpecTM-1083672, Rail Wheels & Road Wheels, Interlocking LugDrive, Hydraulic Actuated Disc Brakes, Meter: 60 Hours

HIlCo Industrial is a division of Hilco Global • Headquarters 5 revere drive, ste. 206 • Northbrook, Il 60062 • all rights reserved

Printed in usa • lEE4435 • Il  license #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

A Hilco Global Company

Vested in Your Success

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM Industrial SEALED BID AUCTION

REAL ESTATE AVAILABLE

FOR SALE OR LEASE BY PRIVATE NEGOTIATIONS• 200,215 Square Feet Available• 6,080 Square Feet of Office Space• Situated on 30.86 Acres• 40’ Clear Height• (3) 35-Ton Cranes

• (8) 25x16’ Grade Level Doors / (2) Truckwells

• Active Interior CSX Rail• Great Freeway Access & Exposure• Heavy Power

For more information, please contact GREG HUDAS(248) 799-3162ghudas@signatureassociates.com

JOE HAMWAY(248) 948-0113jhamway@signatureassociates.com

36320 EUREKA ROADROMULUS, MICHIGAN

• Extremely Late Model • Slitting Lines• Banding Line• Overhead Bridge Cranes

• Quality Inspection• Railcar Mover• Facilities Equipment• Real Estate Available

BIDS DUE: September 28th

Romulus, Michigan

State-of-the-Art Coil Slitting Facility

FollowUs on: