sdt led - regioluxdoc.regiolux.de/sdt-led_gb.pdf · ight source 1x t8 58w evg 70w 7600 lm 840 et...

SDT LED

Made in Germany

Universal light rUn system for economic commercial lighting

2

SDGV LEDSDGS LED

SDT LED

4000 7600 >80 120

Comparative calculation*: Standard LED-lighting

Luminaire SDT+SDG+SDR T8 SDT+SDGV LED 7600

ight source 1x T8 58W EVG 70W 7600 lm 840 ET

Lighting suggestion/ requisite number of luminaires

234.000lm/ 45 luminaires


Average illuminance 329lx 323lx

Total power consumption 2475W 2055W

Efficiency indicator 1,67 W/m²/100 lx 1,41 W/m²/100 lx

Number of luminaires saved 15 luminaires saved

Efficiency optimization 18,4%

*Room situation: Room 30m length, 15m width, room height 5m, mounting height 4,5m, standard reflection factors (0,7 ceiling; 0,5 walls; 0,2 floor)

L

• Equipped for increased requirements with regard to tightness

• Can be expanded by sensors• Different lumen packages • Released for environments prone to risk of fire (SDGS)

From the Regiolux rapid mount-ing system, you can always ex-pect a wide range of application possibilities for almost all uses from IP20, IP40 up to IP54. LED device mounts are also ready now to meet these tasks in a modern and notedly efficient way. In addition, different light directing components have been developed for various visual tasks and aesthetic standards

UNiVERSAL LiGhT RUN SySTEm

with the light quality. Sup-plemented by sensors, even large surfaces can be regulated according to daylight and pres-ence. This utilises the potential for sustainable energy savings in facility management. Everything else you might find you need for your perfect installation is available in the comprehensive resource of accessories.

3SDGVL LED

SDGVL LED

5800 >80 130

• SDGVL LED IP20

• SDGV LED IP40

• SDGS LED IP54

Type overview SDT LED

• Longer LED module• Homogeneous • High-performance

The wide use of LED lighting technology combines finan-cial saving possibilities with improved light quality and envi-ronmental protection for more than our SDT quick mounting system. Of course, different re-quirement profiles of our prod-uct line scaling also determine the LED device mounts. With a variably connectable SDGVL, we have added LED mounts to the performance class 5,800 lm in IP20. With continuous LED units

across the entire mount length, they now form a visually appeal-ing connected light strip. With this harmonious appearance, open beam, deep, wide and asymmetri-cal light controls can be combined and room zones can also be sophisticatedly illuminated. For lighting designers who place value on convincing efficiency calculations, the SDGVL LED now offers significantly more options in the SDT quick mounting system.

SDGVL LED – NEW opTiC AND pERfoRmANCE CLASSES

Comparative calculation*: Standard LED-lighting

Luminaire SDT+SDG+SDR T8 SDT+SDGV LED 7000

Light source 1x T8 58W EVG 45W 7000lm 840

Lighting suggestion/ requisite number of luminaires



Average illuminance 329lx 320lx

Total power consumption 2.475W 1.681W

Efficiency indicator 1,67 W/m²/100 lx 1,17 W/m²/100 lx

Number of luminaires saved 9 luminaires saved

Efficiency optimization 30%

*Room situation: Room 30m length, 15m width, room height 5m, mounting height 4,5m, standard reflection factors (0,7 ceiling; 0,5 walls; 0,2 floor)

L

4

SDFB T5/1500SDFB LED

SDFA T5/1500SDFA LED

SDHF T5/1500SDFH LED

SDFT T5/1500SDFT LED

m

SDT

SDGVL LED

SDGV S3 LED

SDGV M1S1 LED

SDGV LED

SDFBL LED

SDFAL LED

SDFTL LED

SDT LED

SDFB T5/1500SDFB LED

SDFA T5/1500SDFA LED

SDHF T5/1500SDFH LED

SDFT T5/1500SDFT LED

SDGS LED

IP20 SDT LEDSDT LED IP40 IP54

overview quick-fit mounting systems

Light directing

Mounting rail

LED device mount

Mirror wide angle

Mirror asymmetric angle

High-bay rack mirror

Mirror narrow angle

Control

5

SDGVL LED

New locking technologyintelligently and practically solved - the new locking technology for the variable placing of the LED device mount to the mounting rail: simply quick mounting.

• Expansion of LED device mounts by continuous LED units

• Homogeneous optic - perfect for linear appearance

• Variable possibilities of connection

• Three optimised light technologies

• New locking technology

• Excellent light output up to 90%

energy-e�cient

eco-friendly 5

y e a rs w a rran ty

6

SDGVL LED - IP20SDGVL LED - IP20

43

55

sfi1 ip 20

L

SDT

SDFBL LED

SDT

SDGVL

SDFBL LED

113

87

SDT+SDGVL/1500+SDFBL LED 45 W 5800 lm 840

Housing:Device mount with lateral lever lock, of galvanised, profiled sheet steel; LED unit constructed of natural anodised, in housing length seamless for light run without connectors, extruded sectional aluminium, surface with polyester enamel coating; end caps of plastic; can be positioned variably in light run. Suitable for the mounting of LED light directing components.Electrical technology:Heat-resistant cables including connection cable 1 m and rapid instal-lation plug connector with tool-free phase preselection and locating finger. Accessories note:Can be combined with the self-sup-porting specular reflectors SDFAL LED, SDFBL LED and SDFTL LED.

Device mount IP20

Type Unit Versions LxBxh/Dxh

SDGVL 1500 incl. LED 45W 1531 x 55 x 43

Dimensions

Type Unit Version Colour Ballast item number GLED - ip20SDGVL 1500 incl. LED 45W 5800lm 840 vw ET 1821 4014 150 3,70

ET dim DALi 1821 4016 650 3,70

Products

Type Colour material Details item number V GSDG -Contact 1-pole me St+mix for SDT, SDTQ 9200 0267 101 1 0,01

Spare parts

Combination

ηLB 90 % lm/W 130direct/indirect 100/0 % UGR lat./long. 17,1/25,1

7

SDFBL LED

59

87

SDFTL LED SDFAL LED

92

58

94

100

SDFBL LED - Self-support-ing mirror reflectorwide distribution

SDFTL LED - Self-support-ing mirror reflector narrow distribution

SDFAL LED - Self-support-ing mirror reflectorasymmetrical distribution

Accessories

Light directing component:Highly specular anodised ultra-pure reflector, self-supporting, seamless light run without connectors. Light distribution direct, wide distribu-tion, narrow distribution or asym-metrical beam distribution.

Self-supporting reflectors IP20

Type Unit Colour Details LxBxh item number G VSelf-supporting mirror reflectorSDfBL LED 1500 aeh LED ip20 1545 x 87 x 59 1873 3080 100 0,23 1SDfTL LED 1500 aes LED ip20 1545 x 92 x 58 1873 4080 100 0,25 1SDfAL LED 1500 aes LED ip20 1545 x 100 x 94 1873 6080 100 0,37 1

8

SDGV LED - IP40SDGV LED - IP40

sfi1 ip 40

L

43

55116

60

SDGV SDGV S3

SDT

SDFH LED

SDT

SDGV

SDFH LED

111

96

SDT+SDGV/1500+SDfh LED 70 W 7600 lm 840

Housing:Device mount of galvanised, profiled sheet steel; LED unit constructed of natural anodised, extruded sectional aluminium, surface with polyester enamel coating; end caps of plastic; can be positioned variably in light run. Suitable for the mounting of LED light directing components.Electrical technology:Heat-resistant cables including con-nection cable 1 m and rapid mount plug with toolless phase preselection and locating finger.Electrical technology M1/S1:Master luminaire with integrated control device and sensor for daylight and presence-dependent control of up to 31 ECG dim DALI slave luminaires, wired ready for connection via integrated 9-pole plug, including push button for programming accessible from outside. Functions: On/Off, daylight dependent control, pres-ence detection. System components used: LC-OM DALI MULTI 3 control unit, LC-OM LS/PD MULTI 3 light and presence sensor. Connection of up to three further sensor units SDBA S1 and networking of up to four master units is possible. Heat-resistant cables including connection cable 1 m and rapid mount plug with toolless phase preselection and locating finger.Electrical technology S3:Sensor unit with integrated LC-OM HIGHBAY sensor for presence-dependent switching, wired ready for connection, can be used to a ceiling height of 10 m. Electrical technology B3:With 3h emergency battery. Emer-gency light LED with integrated status indicator; 3-hour emergency light operation. One wire from through-wiring can be used as unswitched charge phase via a supplementary pole at the plug.Accessories note:Can be combined with the self-sup-porting specular reflectors SDFA LED, SDFB LED, SDFT LED and SDFH LED.

Device mount IP40

Type Unit Version Colour Ballast item number GLED - ip40SDGV 1500 incl. LED 35W 4000lm 840 vw ET 1820 1014 150 2,70

ET dim DALi 1820 1016 650 2,70ET Em pack 3h 1820 1714 150 3,04ET Em pack 3h dim DALi 1820 1716 650 3,04ET m1S1 dim DALi 1820 1116 650 2,86ET S3 1820 1214 150 2,88

incl. LED 70W 7600lm 840 vw ET 1820 2014 150 2,70ET dim DALi 1820 2016 650 2,70ET Em pack 3h 1820 2714 150 3,04ET Em pack 3h dim DALi 1820 2716 650 3,04ET m1S1 dim DALi 1820 2116 650 2,86ET S3 1820 2214 150 2,88

Products


Spare parts

Combination


Type Unit Versions LxBxh/Dxh

SDGV 1500 incl. LED 35W 1531 x 55 x 43incl. LED 70W 1531 x 55 x 43

Dimensions

9

SDFB LED

59

87

SDFT LED SDFH LED SDFA LED

96

57

92

58

94

100

Self-supporting reflectors IP40SDFB LED - Self-supporting mirror reflectorwide distribution

Accessories

Light directing component:Reflection-enhanced ultra-pure alu-minium reflector, self-supporting, seamless light run available upon request. Direct light distribution, wide distribution, narrow distribu-tion, extreme narrow distribution or asymmetrical distribution.

SDFT LED - Self-supporting mirror reflectornarrow distribution

SDFH LED - Self-supporting mirror reflectorextreme narrow distribution

SDFA LED - Self-supporting mirror reflectorasymmetrical distribution

Type Unit Colour Details LxBxh item number G VSelf-supporting mirror reflectorSDfB LED 1500 aes LED ip40 1130 x 87 x 59 1873 3000 100 0,14 1SDfT LED 1500 aes LED ip40 1130 x 92 x 58 1873 4000 100 0,14 1SDfh LED 1500 aeh LED ip40 1130 x 96 x 57 1873 9000 100 0,15 1SDfA LED 1500 aes LED ip40 1130 x 100 x 94 1873 6000 100 0,17 1

10

SDGS LED - IP54SDGS LED - IP54

43

55

sdi1 ip 54

SDTSDT

SDGS

63

73

L

SDT+SDGS/1500 LED 35 W 4000 lm 840

Housing:Device mount insert of galvanised, profiled sheet steel, for ensuring the protection class with all-round closed seal which is sealed towards to the support rail; surface with polyester enamel coating; with two rotary catches for rapid mounting to rail, LED unit made from aluminium extrud-ing press profile, natural anodised. Suitable for the mounting of LED light directing components.Electrical technology:Heat-resistant cables including fixed 3-pole rapid installation plug connec-tor with tool-free phase preselection and locating finger.Accessories note:Can be combined with the self-sup-porting specular reflectors SDFA LED, SDFB LED, SDFT LED and SDFH LED. Type Unit Versions LxBxh/Dxh

SDGS 1500 incl. LED 35W 1531 x 55 x 43incl. LED 70W 1531 x 55 x 43

Device mount IP54

Dimensions

Combination


Type Unit Version Colour Ballast item number GLED - ip54SDGS 1500 incl. LED 35W 4000lm 840 vw ET 1846 1014 100 2,70

ET dim DALi 1846 1016 600 2,70incl. LED 70W 7600lm 840 vw ET 1846 2014 100 2,70

ET dim DALi 1846 2016 600 2,70

Products


Spare parts

11

SDFB LED

59

87

SDFT LED SDFH LED SDFA LED

96

57

92

58

94

100

Light directing component:Reflection-enhanced ultra-pure alu-minium reflector, self-supporting, seamless light run available upon request. Direct light distribution, wide distribution, narrow distribu-tion, extreme narrow distribution or asymmetrical distribution.

Self-supporting reflectors IP54

Type Unit Colour Details LxBxH Item number G VSelf-supporting mirror reflectorSDFB LED 1500 aes LED IP40/54 1130 x 87 x 59 1873 3000 100 0,14 1SDFT LED 1500 aes LED IP40/54 1130 x 92 x 58 1873 4000 100 0,14 1SDFH LED 1500 aeh LED IP40/54 1130 x 96 x 57 1873 9000 100 0,15 1SDFA LED 1500 aes LED IP40/54 1130 x 100 x 94 1873 6000 100 0,17 1

Accessories

SDFB LED - Self-supporting mirror reflector wide distribution

SDFT LED - Self-supporting mirror reflector narrow distribution

SDFH LED - Self-supporting mirror reflectorextreme narrow distribution

SDFA LED - Self-supporting mirror reflectorasymmetrical distribution

12

63

46

L

SDT - Mounting distance max. 2.5 m

Housing:Mounting rail of profiled, torsionally stiff sheet steel, pregalvanised; wire flat cabe fitted at the factory and wired to rapid mounting socket part. Suitable for IP20, IP40 and IP54. To be equipped with either LED, T5 or T8 device mounts. Important: For the use of the 11-pole wired mounting rails special designs of device mounts are required.Mounting note:The maximum distance between the vertical suspension points is determined by the weight of the light run. With an open distribution light run with 1500 units as ECG versions, the distance between the vertical suspension points may be increased to a maximum of 3.5 m. For wider distances (up to 4.5 m), an M suspension with the SDTQ-ZA accessory. Attention: The suspensions are possible only for horizontal light runs. Please get in touch for other installations or inclined suspension.

s i1 ip20/40/54

Type Unit LxBxh/Dxh

SDT1500/i 1500 1535 x 63 x 46SDT1500/ii 1500 3070 x 63 x 46SDT1500/iii 1500 4605 x 63 x 46

Mounting rail

Dimensions

Type Unit Wiring Colour/i /ii /iii

item number G item number G item number GSDT 1500 5x1,5 qmm vw 1825 1580 100 1,60 1825 2580 100 3,20 1825 3580 100 4,60

wa 1825 1580 105 1,60 1825 2580 105 3,20 1825 3580 105 4,605x2,5 qmm vw 1826 1580 100 1,65 1826 2580 100 3,30 1826 3580 100 4,80

wa 1826 1580 105 1,65 1826 2580 105 3,30 1826 3580 105 4,807x1,5 qmm vw 1827 1580 100 1,70 1827 2580 100 3,40 1827 3580 100 5,007x2,5 qmm vw 1828 1580 100 1,75 1828 2580 100 3,50 1828 3580 100 5,20

wa 1828 1580 105 1,75 1828 2580 105 3,50 1828 3580 105 5,207x2,5/4x1,5 qmm vw 1830 1580 100 1,75 1830 2580 100 3,50 1830 3580 100 5,20

Products

SDT - Mounting rail

13

Type Colour material Details item number V GSocket/plug combined SDTA f-7 ce polymer 7pol., 5/7x1,5-2,5mm² for SDT, SDTQ 1820 3092 100 1 0,01

SDTA m-7 ce polymer 7pol., 5/7x1,5-2,5mm² for SDT, SDTQ 1820 3090 100 1 0,01SDTA f-11 ce polymer 11pol., 4x1.5mm² + 7x1.5-2.5mm² for SDT 1820 2092 100 1 0,01SDTA m-11 ce polymer 11pol., 4x1.5mm² + 7x1.5-2.5mm² for SDT 1820 2090 100 1 0,01

Connection cable kit SDT -KDV vw St 2xmale+female 7 pol.; 7x2.5mm², 600mm for SDT 1884 7900 100 1 0,50protective cover ip20 SDTE vw pC for SDT, SDTQ, ATS 1890 0231 100 2 0,02

wa pC for SDT 1890 0231 105 2 0,02Single wire suspension SDCS ws Stainless steel + mix l=2000mm for SDT 1890 0034 100 1 0,07

SDCSE ws Stainless steel + mix Canopy D=123mm, rope D=1.5mm, L=2200mm, 3x1.5mm² for SDT

1890 0044 100 1 0,30

Chain suspension Kp 80 me St+pC l=800mm for pendant luminaires 9282 9080 100 1 0,27Knotenkette me St l=30m, for SDT, SDTQ, ATS, pendant luminaires 9282 9300 100 1 4,60SDh me inox for SDT, SDTQ, ATS 1890 0039 100 1 0,04SDTQ -ZA me St for SDT, SDTQ 6820 9300 110 1 0,70

Tubular pendant suspension

Rp 50 ws St+pC d=16mm, m13, l=500mm for pendant luminaires 9280 9050 100 1 0,25Rp 80 ws St+pC d=16mm, m13, l=800mm for pendant luminaires 9280 9080 100 1 0,33Rp 100 ws St+pC d=16mm, m13, l=1000mm for pendant luminaires 9280 9100 100 1 0,40SDRp me Stainless steel + mix for SDT 1890 0054 100 1 0,02

mounting clip SDCT me inox for SDT 1890 0042 100 1 0,03SDD me inox for SDT 1890 0033 100 1 0,01

Rail connecting piece SDT -K L vw St L-form 1884 7200 100 1 0,45wa St L-form 1884 7200 105 1 0,62

SDT -K T vw St T-form 1884 7300 100 1 0,84wa St T-form 1884 7300 105 1 0,84

SDT -K X vw St X-form 1884 7400 100 1 0,63wa St X-form 1884 7400 105 1 1,10

SDTV me St.galv. for SDT 1820 0020 100 1 0,22SDTVL me St.galv. unlockable for SDT 1820 0031 100 1 0,24

Accessories

Accessories

Accessories mounting rail SDT IP40/IP54

Accessories mounting rail SDT IP20

Type Colour material Details item number V GSocket/plug combined SDTA f-7 ce polymer 7pol., 5/7x1,5-2,5mm² for SDT, SDTQ 1820 3092 100 1 0,01

SDTA m-7 ce polymer 7pol., 5/7x1,5-2,5mm² for SDT, SDTQ 1820 3090 100 1 0,01SDTA f-11 ce polymer 11pol., 4x1.5mm² + 7x1.5-2.5mm² for SDT 1820 2092 100 1 0,01SDTA m-11 ce polymer 11pol., 4x1.5mm² + 7x1.5-2.5mm² for SDT 1820 2090 100 1 0,01

protective cover ip54 SDTES vw pC for SDT ip54 1890 0235 100 2 0,02

Single wire suspension SDCS ws Stainless steel + mix l=2000mm for SDT 1890 0034 100 1 0,07SDCSE ws Stainless steel + mix Canopy D=123mm, rope D=1.5mm, L=2200mm,

3x1.5mm² for SDT1890 0044 100 1 0,30

Chain suspension Kp 80 me St+pC l=800mm for pendant luminaires 9282 9080 100 1 0,27Knotenkette me St l=30m, for SDT, SDTQ, ATS, pendant luminaires 9282 9300 100 1 4,60SDh me inox for SDT, SDTQ, ATS 1890 0039 100 1 0,04

Tubular pendant suspension

Rp 50 ws St+pC d=16mm, m13, l=500mm for pendant luminaires 9280 9050 100 1 0,25Rp 80 ws St+pC d=16mm, m13, l=800mm for pendant luminaires 9280 9080 100 1 0,33Rp 100 ws St+pC d=16mm, m13, l=1000mm for pendant luminaires 9280 9100 100 1 0,40SDRp me Stainless steel + mix for SDT 1890 0054 100 1 0,02

mounting clip SDCT me inox for SDT 1890 0042 100 1 0,03SDD me inox for SDT 1890 0033 100 1 0,01

Rail connecting piece SDTVLS me St.galv. detachable for SDT ip54 1820 0050 100 1 0,25

14 System components SDT

Combination device mount and attachment parts for light directing

IP54LED mounting rail configuration (example) item number page of catalogue

SDGS-LED SDGS/1500 LED 35W 4000lm 840 ET 18461014100 new

SDGS-LED SDGS/1500 LED 70W 7600lm 840 ET 18462014100 new

SDBAS Blank cover for device mounts IP54 18826580100 455

Type light directing light distribution item number page of catalogue

SDFB LED Self-supporting mirror reflector wide 18733000100 460

SDFT LED Self-supporting mirror reflector narrow 18734000100 461

SDFH LED Self-supporting mirror reflector extreme narrow 18739000100 462

SDFA LED Self-supporting mirror reflector asymmetrical 18736000100 463


SDGVL LED SDGVL/1500 LED 45W 5800lm 840 ET 18214014150 new

SDBA Blank cover for device mounts IP20 18836580100 444


SDFBL LED Self-supporting mirror reflector wide 18733080100 new

SDFTL LED Self-supporting mirror reflector narrow 18734080100 new

SDFAL LED Self-supporting mirror reflector asymmetrical 18736080100 new


SDGV LED SDGV/1500 LED 35W 4000lm 840 ET 18201014150 427

SDGV LED SDGV/1500 LED 70W 7600lm 840 ET 18202014150 427

SDBAS Blank cover for device mounts IP54 18826580100 455


SDFB LED Self-supporting mirror reflector wide 18733000100 460

SDFT LED Self-supporting mirror reflector narrow 18734000100 461

SDFH LED Self-supporting mirror reflector extreme narrow 18739000100 462

SDFA LED Self-supporting mirror reflector asymmetrical 18736000100 463

15

SDT System-components

1er- mounting

rail

2er- mounting

rail

3er- mounting

rail

connector pair end caps

Bracket (or ceiling mount-

ing) +

device mounts SDG...->

if so +

self-supporting reflector

Legend ① ① ① ② ③ ④ ⑤ ⑥LED

IP20Item Designation Item number

SDT 1500/I 5x2,5mm²

18261580100

SDT 1500/II 5x2,5mm²

18262580100

SDT 1500/III 5x2,5mm²

18263580100

SDTVL

18200031100

SDTE

18900231100

SDH 18900039100 or

SDD 8900033100

SDGVL LED if so

+

SDFBL LED SDFTL LED SDFAL LED

LED IP40

SDTVL

18200031100

SDTES

18900235100

SDGV LED

if so +

SDFB LED SDFT LED SDFH LED SDFA LEDLED

IP54SDTVLS

18200050100

SDTES

18900235100

SDGS LED

if so +

Length [m] piece/unit piece piece piece piece piece piece piece piece

1,54 1 1 0 0 0 1 2 1 1

3,07 2 0 1 0 0 1 2 2 2

4,61 3 0 0 1 0 1 2 3 3

6,14 4 0 2 0 1 1 3 4 4

7,68 5 0 1 1 1 1 4 5 5

9,21 6 0 0 2 1 1 4 6 6

10,75 7 0 2 1 2 1 5 7 7

12,28 8 0 1 2 2 1 6 8 8

13,82 9 0 0 3 2 1 6 9 9

15,35 10 0 2 2 3 1 7 10 10

16,89 11 0 1 3 3 1 8 11 11

18,42 12 0 0 4 3 1 8 12 12

19,96 13 0 2 3 4 1 9 13 13

21,49 14 0 1 4 4 1 10 14 14

23,03 15 0 0 5 4 1 10 15 15

24,56 16 0 2 4 5 1 11 16 16

26,10 17 0 1 5 5 1 12 17 17

27,63 18 0 0 6 5 1 12 18 18

29,17 19 0 2 5 6 1 13 19 19

30,70 20 0 1 6 6 1 14 20 20

32,24 21 0 0 7 6 1 14 21 21

33,77 22 0 2 6 7 1 15 22 22

35,31 23 0 1 7 7 1 16 23 23

36,84 24 0 0 8 7 1 16 24 24

38,38 25 0 2 7 8 1 17 25 25

39,91 26 0 1 8 8 1 18 26 26

41,45 27 0 0 9 8 1 18 27 27

42,98 28 0 2 8 9 1 19 28 28

44,52 29 0 1 9 9 1 20 29 29

46,05 30 0 0 10 9 1 20 30 30

47,59 31 0 2 9 10 1 21 31 31

49,12 32 0 1 10 10 1 22 32 32

50,66 33 0 0 11 10 1 22 33 33

52,19 34 0 2 10 11 1 23 34 34

53,73 35 0 1 11 11 1 24 35 35

if required, plan feeder adapter SDTAF-7 Nr. 18203092100

System components SDT for quantity calculation

System modules SDTSy

stem

mod

ule

① SDT mounting rail > Select rails with 2- or 3-lengths with the corresponding wiring

④ Mountings > Chain hook or ceiling mounting in accordance with the distance between the suspensions

② Rail connectors > Calculate the type which suits the protection class

③ Rail end caps > Select the pairs of endpieces which suit the protection class

⑤Device mounts/

Blank cover

> Quantities with addtional attachment parts, if required, according to table calculation of quantities> Select the type which suit the protection class of the device mount

⑥ Light directing > Reflector in accordance with the planned light distribution

16

Made in GermanyRegiolux

Regiolux GmbH Hellinger Straße 3D 97486 Königsberg T +49 9525 89 0F +49 9525 89 [email protected]

alvia

lens line LED mLf LED

peanut LED

cubus LED

WBLR LEDprotection LED

vakant

pU LEDheip

doma LED

planara

SDT LED ip20/40/54WQL LED

ThLA LEDcooky LED

overview - LED luminaires

9999

144

1 21

3 1A

200

0 09

/13

MA

/HD

Subj

ect t

o m

odifi

catio

ns

sdt led - regioluxdoc.regiolux.de/sdt-led_gb.pdf · ight source 1x t8 58w evg 70w 7600 lm 840 et...

Documents