sdr version upgrade guide (v4.00.30.xx to v4.11.10.14pxx)_r1.1

8/12/2019 SDR Version Upgrade Guide (V4.00.30.Xx to V4.11.10.14Pxx)_R1.1

1/100

SDR Version Upgrade Guide

V4.00.30.xx to V4.11.10.14Pxx


2/100


LEGAL IN !R"A#I!N

By accepting this certain document of ZTE CORPOR T!O" you agree to the fo##o$ing terms% !f youdo not agree to the fo##o$ing terms& p#ease notice that you are not a##o$ed to use this document%

Copyright ' ()*+ ZTE CORPOR T!O"% ny rights not e,press#y granted herein are reser-ed% Thisdocument contains proprietary information of ZTE CORPOR T!O"% ny reproduction& transfer&distri.ution& use or disc#osure of this document or any portion of this document& in any form .y anymeans& $ithout the prior $ritten consent of ZTE CORPOR T!O" is prohi.ited%

and are registered trademar/s of ZTE CORPOR T!O"% ZTE0s company name& #ogoand product names referenced herein are either trademar/s or registered trademar/s of ZTECORPOR T!O"% Other product and company names mentioned herein may .e trademar/s or tradenames of their respecti-e o$ners% 1ithout the prior $ritten consent of ZTE CORPOR T!O" or thethird party o$ner thereof& anyone0s access to this document shou#d not .e construed as granting& .yimp#ication& estopped or other$ise& any #icense or right to use any mar/s appearing in the document%

The design of this product comp#ies $ith re2uirements of en-ironmenta# protection and persona#security% This product sha## .e stored& used or discarded in accordance $ith product manua#&re#e-ant contract or #a$s and regu#ations in re#e-ant country 3countries4%

This document is pro-ided 5as is6 and 5as a-ai#a.#e6% !nformation contained in this document is

su.7ect to continuous update $ithout further notice due to impro-ement and update of ZTECORPOR T!O"0s products and techno#ogies%

$#E %!RP!RA#I!N

Address& ddress8 "O% 99:i;tech Road SouthShenZhenP%R%China

9*


3/100


Re+ision ,istor-

Produ t Version Do u)ent Version Seria* Nu)(er Reason /or Re+ision

R*%) irst pu.#ished

R*%* GU -ersionsintegrated

Aut or

Date Do u)ent Version Prepared(- Re+ie ed (- Appro+ed (-

!! '()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


4/100


Intended audien e& 2ase station o))issioning engineer

Proposa*& efore reading this document, you had better have the followingknowledge and skills.

SE no *edge and s5i**s Re/eren e )ateria*

* ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

(

o**o 6up do u)ent& A/ter read ing this document, you may need the followinginformation.

SE Re/eren e )ateria* In/or)ation

* ,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

(

ZTE Confidentia# Proprietary ' ()*+ ZTE CORPOR T!O"% ## rights reser-ed% !!!


5/100


A(out # is Do u)ent

Su))ar-% apter Des ription

* O-er-ie$ O-er-ie$

( Genera# Upgrade Procedure Genera# Upgrade Procedure

Preparations for Version Upgrade Preparations for Version Upgrade

+ Version Pac/age Creation Version pac/age creation

9 irm$are Upgrade irm$are Upgrade

Data Upgrade Data Upgrade

= Soft$are Do$n#oad Soft$are Do$n#oad

< Soft$are cti-ation Soft$are cti-ation

o##o$;up 1or/ of Upgrade o##o$;up 1or/ of Upgrade

*) Version Ro##.ac/ Version Ro##.ac/

** Second Upgrade fter Ro##.ac/ Second Upgrade fter Ro##.ac/*( Commissioning Site in V+%))De#i-ery Version

Commissioning Site in V+%)) De#i-ery Version

* Trou.#eshooting of Commonau#ts

Trou.#eshooting of Common au#ts

pp Upgrade Chec/#ist Upgrade Chec/#ist

!V '()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


6/100


T BFE O CO"TE"TS

1 !+er+ie 1*%* pp#ication Scope%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*%( Genera# Care%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*%(%* Version Confirmation%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*%(%( Operation !nterface%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*%(% Version Pac/age%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*%(%+ Other%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

7 Genera* Upgrade Pro edure........................ .............. .............. ............ ...... ..... ...... ...... ..3

(%* Upgrade Contents%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(%( ey Upgrade Procedure%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(% Other "otices%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

3 Preparations /or Version Upgrade.................... .............. .............. .............. ............ ..... .8%* Preparing Soft$are Version%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%( Preparing Documents%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% O@CB Upgrade%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %* RHB Sp#it%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %( Chec/ing !P Configuration%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+ Upgrade Chec/%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+%* Chec/ing BSC Configuration%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%+%( Chec/ing Site Configuration%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+% Chec/ing Site Version%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+%+ Chec/ing Site Status%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%9 Dis/ C#earance%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%9%* De#eting S#a-e Version Pac/age in Batch%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

4 Version Pa 5age %reation..................... .............. .............. .............. .............. .......... .... 17+%* Creating irm$are Pac/age%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+%( Creating Soft$are Pac/age%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

9 ir) are Upgrade....................................................................................................... 719%* Do$n#oading irm$are Version Pac/age%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%9%( cti-ating irm$are Version Pac/age%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%9%(%* cti-ating @@CBOOT Version%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%9%(%( cti-ating Boot Version%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%9%(% Chec/ing cti-ation Resu#t%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

8 Data Upgrade............................................................................................................... 7:%* Too# !ntroduction %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%( E,porting Pre;Upgraded Data rom O@CBV+%))%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(%* Up#oading Data On#ine %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(%( Bac/ing up SDR Configuration Data%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(% E,porting Dry Contact Data%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Upgrading Version 1ith ZIO@CBSmoothToo#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

ZTE Confidentia# Proprietary ' ()*+ ZTE CORPOR T!O"% ## rights reser-ed% V


7/100


% %* Con-erting Data%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %( Transferring Dry Contact Contents%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+ !mporting Upgraded Data to O@CBV+%**%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+%* !mporting Configuration Data%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+%( !mporting Dry Contact Data%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%+% Chec/ on the -a#idity of configuration data%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

; So/t are Do n*oad.................... .............. .............. .............. .............. .............. ........... .4( ciphering a#gorithm is ena.#ed% igure ;( sho$s 9>(ciphering a#gorithm is ena.#ed%

no *edge&

!n order to perform .atch chec/ing& e,port t#or) P a& Data & compare theparameter -a#ues in the C P %RMOD% co#umn in the C : & ra sheet% The


24/100


onsite engineer can 7udge $hether 9>( ciphering a#gorithm is ena.#ed in the ce##configuration $indo$ according to different types of -a#ues for C P %RMOD%%

3.4.7 % e 5ing Site %on/iguration

@a/e sure on#y one CC .oard is configured in the SDR and O@CB for each site%@aster>s#a-e CC .oards are not configured%

3.4.3 % e 5ing Site Version

Chec/ $hether the SDR -ersion used .efore the upgrade is up#oaded to the O@CB forthe sa/e of ro##.ac/%

3.4.4 % e 5ing Site Status

Chec/ $hether #in/ .rea/ or transient transmission .rea/ occurs in any sites% :and#e thesituation immediate#y $hen it occurs& other$ise the upgrade in the site $i## .e affected% !fthe #in/ of the site cannot .e connected on the night of upgrade& upgrade the other sitesfirst% 1hen the transmission returns to norma#& upgrade this site independent#y%

3.9 Dis5 %*earan e

3.9.1 De*eting S*a+e Version Pa 5age in 2at

!n 2ase Station So/t are "anage)ent of OMCBV4.00 & dou.#e;c#ic/ SDR So/t are

Version "anage)ent & c#ic/ to 2uery the current SDR -ersion%

igure ; Juerying Running Version

*) ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


25/100


!n the ta. of "anaged E*e)ents So/t are In/o & right;c#ic/ the 2ueried -ersioninformation& and choose S*a+e Version Pa 5age 2at De*etion %

igure ;+ S#a-e Version Pac/age Batch De#etion

no *edge&

0. *he package deleted in this step is the one backed up before the upgrade (meanwhile,the target version is not uploaded into the OMM). *herefore, the operation will not leadto abnormal version status after the upgrade or rollback.

1. "f there is no slave version package in &2/, the options related to slave version package, such as Slave Version Package Batch Deletion , will not be listed in theshort3cut menu when -ou right3click the version.


26/100


4 Version Pa 5age %reation!n OMCBV4.00 of the integrated RHB -ersion& create the firm$are -ersion pac/age% !nthe ne$ OMCBV4.11 -ersion& create the soft$are -ersion pac/age%

4.1 %reating ir) are Pa 5age

irm$are pac/age is genera##y sa-ed in the fo##o$ing path8

BV4.11.10.14Pxx$ 4.00_SmoothUpgrad _!"rm#ar $

*% !n the O@CR in the RHB integration mode& c#ic/ Vie M 2ase Station So/t are"anage)ent as sho$n in the fo##o$ing figure8

igure +;9 Base Station Soft$are @anagement

(% Right;c#ic/ SDR 2ootEp*d Version Pa 5age "anage)ent & and choose %reate M2ootEp*d Version Pa 5age %

*( ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


27/100


igure +; Creating irm$are Pac/age

% Choose the firm$are pac/age in the BV4.11.10.14Pxx$4.00_SmoothUpgrad _!"rm#ar directory%

igure +;= irm$are Pac/ages for Different Site Types

+% 1hen the -ersion of the corresponding site type is se#ected& the chec/ on thepac/age starts automatica##y& $hich #asts a.out one minute%


28/100


igure +;< Progress of Version Pac/age Chec/

9% 1hen the -ersion chec/ is passed& the $indo$ as igure + ; pops up% Fea-e theUser La(e* .#an/& and c#ic/ ! %

igure +; Se#ecting Supported BTS Type for irm$are Upgrade

% !n the pop;up $indo$& -ie$ the -ersion fi#e .eing progressed and -ersion creationprogress& as sho$n in the fo##o$ing figure%

igure +;*) Creating irm$are Pac/age

*+ ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


29/100


=% fter a.out three minutes& the firm$are pac/age is successfu##y created%Under thenode of SDR 2ootEp*d Version Pa 5age "anage)ent & -ie$ the ne$#y;createdfirm$are pac/age% Dou.#e;c#ic/ the pac/age to -ie$ the detai#ed information%

igure +;** "e$#y;Created Version Pac/age

Note:

4or the &2/5 . series versions, different firmware packages should be used for differentsite t-pes. /efer to *able 30 for details. 6hen the firmware version package is created,

downloaded, or activated, ac uire the information for the e!isting site t-pes, and create,download, or activate the corresponding firmware version package for each site t-pe.

Ta.#e +;* Site Type Corresponding to Each Version Pac/age

Version Pa 5age i*e %orresponding Site #-pe

1;BS


30/100


Version Pa 5age i*e %orresponding Site #-pe

1;BS< ))NGU );+%))% )%) P) B)(9B)(+;

*()** %p/g

pp#ica.#e to the BS< )) $ith the o#dca.inets 3BC< *)& RC< **& andPC< *)& etc%4%On#y one RC< *) ca.inetcan .e configured at most%

1;BS< ))NGU )N E;+%))% )%) P) B)(9B)(+;*()** %p/g

pp#ica.#e to the BS< )) $ith the o#dca.inets 3BC< *)& RC< **& andPC< *)& etc%4% @u#tip#e RC< *)e2uipment can .e configured%

1;BS< ) N G) );+%))% )%) P) B)(9B)(+;*()** %p/g

pp#ica.#e to ZISDR BS< ) G) )&$hich on#y supports GS@ sing#e mode%

1;BS< ) N GU ) );+%))% )%) P) B)(9B)(+;*()** %p/g

pp#ica.#e to ZISDR BS< ) GU ) )&$hich supports GU dua# mode%

Ta.#e +;( Se#f;Chec/ Ta.#e for irm$are Version Creation

%reated or Not

BS


31/100


igure +;*( @u#tip#e @ode Station Soft$are @anagement

(% Choose the -ersion pac/age to .e created%

igure +;* Se#ecting Create Version Pac/age in the @ain 1indo$ of @u#tip#e @odeStation Soft$are @anagement

% To create -ersion pac/age& se#ect a node under Soft$are Version Pac/age@anagement& and c#ic/ %reate Version % C#ic/%reate Version %


32/100


igure +;*+ Creating Soft$are Version Pac/age

+% Se#ect the -ersion pac/age to .e created%

or GS@ sing#e mode8 Create S'_:SM_4.11.10.14P;;p)g and

S'_P


33/100


igure +;* Chec/ing and Creating Version Pac/age

Note:

*ake V4.11.10.14P01 as an e!ample. "t takes the following time to create each version package.

Creation time for S'_:SM_4.11.10.14P01.p)g $ about 7 minutes

Creation time for S'_P


34/100


35/100


9 ir) are Upgrade

Note:

*he firmware upgrade refers to the download and activation of firmware version, notincluding reset. *herefore, the service in the e!isting network is not affected, that is, theoperation can be performed in the da- time. After the operations in this chapter, the firmwareused in the site is still the one before the upgrade. Onl- after the + Activation and Reset(activation here refers to software activation) in the smooth3upgrade procedure (in the

following chapter) is performed to make the base station reset, the upgrade of the firmware iscompleted.

*he upgrade of firmware must be performed in the Base Station Software Managementwindow of /8B split OMCB5 . .

Caution:

2uring firmware upgrade, it is not allowed to telnet to the site being upgraded, otherwise theupgrade ma- fail.

9.1 Do n*oading ir) are Version Pa 5age

*% C#ic/ Vie M 2ase Station So/t are Version "anage)ent M SDR So/t areVersion "anage)ent M SDR 2ootEp*d Version Pa 5age "anage)ent & anddou.#e;c#ic/ the -ersion pac/age to .e do$n#oaded& $hich is the V4.00.30.09firm$are pac/age created in +%* Creating irm$are Pac/age% !n the right pane&

c#ic/ the Pa 5age Do n*oad icon % dia#og .o, for confirmation pops up%


36/100


igure 9;*< Do$n#oading Pac/age in Soft$are Version Pac/age @anagement

igure 9;* Confirming irm$are Pac/age Do$n#oad

(% C#ic/ ! in igure 9 ;* % The ir) are Version Pa 5age Do n*oad $indo$pops up& as sho$n in igure 9 ;()% Se#ect the site $here the firm$are -ersionpac/age $i## .e do$n#oaded to in the #eft pane 3"ote8 The -ersion pac/ages fordifferent types of sites shou#d .e do$n#oaded separate#y4%The -ersion cannot .edo$n#oaded to the site $here the #in/ is disconnected% nd therefore& se#ect the site$here the #in/ can .e esta.#ished norma##y% Right;c#ic/ the su.net$or/ in igure 9;() & and se#ect i*ter %

(( ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


37/100


igure 9;() i#tering Site

% !n the i*tering %ondition & se#ect Nor)a* %onne t as Lin5 State % C#ic/! %

igure 9;(* Configuring Site i#ter Parameters

+% !n the $indo$ of ir) are Version Pa 5age Do n*oad & a## the sites $ith norma##in/ esta.#ishment are sho$n in the #ist% Se#ect the "Es to .e do$n#oadedseparate#y& or se#ect the chec/ .o, of a## the sites $ith norma# #in/ esta.#ishment%Right;c#ic/ the su.net node to se#ect ir) are Version Pa 5age Do n*oad %

prompt pops up in the right pane& indicating 5Do$n#oad command sentsuccessfu##y 6

igure 9;(( Choosing a Site to Do$n#oad irm$are Version


38/100


9% !f the Resu*t is 5Do n*oad o))and sent su ess/u**- 6& c#ose the ir) areVersion Pa 5age Do n*oad $indo$& and return to the 2ase Station So/t are"anage)ent $indo$ as sho$n in igure 9 ;( % Choose the ir) are VersionPa 5age !peration Log ta. and chec/ the resu#t of firm$are -ersion pac/agedo$n#oad% Right;c#ic/ the 2uery resu#t to e,port the resu#t for further chec/%

igure 9;( Juerying irm$are Pac/age Do$n#oad Resu#t

Ta.#e 9;+ Se#f;Chec/ Ta.#e for irm$are Version Do$n#oad

Do n*oaded or Not

BS


39/100


igure 9;(+ Se#ecting Pac/age cti-ation in Base Station Soft$are @anagement

igure 9;(9 Confirming irm$are cti-ation

Note:

"n this step, the board will not be reset after the firmware is activated. *hus the prompt in theabove figure is not proper, which can be omitted.

9.7.1 A ti+ating ""%2!!# Version

*% !n the $indo$ of ir) are Version Pa 5age A ti+ation & se#ect ""%2!!# as

# e #-pe o/ ir) are % C#ic/ to se#ect a## the .oards% !n the #eft pane& right;c#ic/ the site $here @@CBOOT -ersion shou#d .e do$n#oaded& and choose

ir) are Version Pa 5age A ti+ation % !t ta/es three minutes to comp#ete theoperation%


40/100


igure 9;( Se#ecting Site and Board for @@CBOOT cti-ation

(% Dou.#e;c#ic/ an item in the operation resu#t $indo$ to -ie$ the detai#ed information%

igure 9;(= @@CBOOT cti-ation Resu#t

#ip&

6hen firmware version activation fails in some site, the progress bar will remain at 9 : forabout ' minutes.

After the activation, check the log information, and record the site where activation failureoccurs.

"f the MMCBoot version activation fails in some base station, remove the base station forBoot version activation, later on perform the operation on it independentl-.

9.7.7 A ti+ating 2oot Version

Se#ect 2oot as # e #-pe o/ ir) are % The other steps are the same as that for

( ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


41/100


@@CBOOT -ersion acti-ation% !t ta/es one minute to comp#ete the operation%

igure 9;(< Se#ecting Site and Board for BOOT cti-ation

9.7.3 % e 5ing A ti+ation Resu*t

!n the $indo$ of 2ase Station So/t are "anage)ent & dou.#e;c#ic/ SDR So/t areVersion "anage)ent in the #eft pane% !n the ta. of ir) are Pa 5age A ti+ating In/o

of the right pane& c#ic/ to 2uery the resu#t%

The -ersion pac/age acti-ation information of the site is sho$n in the upper pane%Dou.#e;c#ic/ the information to see the firm$are acti-ation information of a## the .oardsin the site% Right;c#ic/ the 2uery resu#t to e,port the resu#t for further chec/%

igure 9;( Juerying irm$are Version cti-ation Resu#t

666666666666666666666666666I)portant Note666666666666666666666666666

*% Different types of sites shou#d .e acti-ated separate#y& such as BS


42/100


""%2!!# 2!!#

BS< ))

(% fter the firm$are is acti-ated& D! N!# restart the .ase station%

!f the site is re.ooted after the firm$are pac/age is acti-ated& the acti-ated ne$firm$are $i## start to run% !n case that any pro.#em happens to the ne$ firm$are0soperation& a.norma# situations #i/e .oards .eing una.#e to start $i## occur%Therefore& re.ooting sites can .e performed at night% !f any a.norma# situationoccurs& there is sufficient time to dea# $ith the pro.#em%

% During soft$are -ersion do$n#oad& the SDR firm$are -ersion may .e de#etedautomatica##y 3refer to =%*%* !nf#uence of En-ironment Chec/ Resu#t on VersionDo$n#oad 4% Therefore& firm$are acti-ation shou#d .e performed .efore en-ironmentchec/& other$ise the acti-ation may fai#%

(< ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


43/100


44/100


UserFa.e# again on the up#oaded config set%

(% pp#y for mute, right in .atch%

% Right;c#ic/ the node of the su.net to se#ect 2ase Station %on/iguration'i=ard>SDR? % Se#ect a site to perform !n*ine Up*oad Data according to the$i?ard% nd then s$itch the up#oaded config set as the master one%

igure ; ) Right;C#ic/ing the "ode to Choose Base Station Configuration1i?ard3SDR4 for Up#oading Data On#ine

Note:

0. 2uring the online upload data process, the check bo! of Status s nchroni!ation must be chosen, otherwise the status of &2/ and OMCB ma- be inconsistent, which ma-result in the +Block status of some cells after the upgrade.

1. 2uring the online upload data process, the check bo! of &-nchroni;e all tables must


45/100


'. "f it is impossible to perform Data "nline #$load for some site, handle the situationimmediatel-= otherwise the follow3up upgrade operations on the site cannot be

performed.

8.7.7 2a 5ing up SDR %on/iguration Data

*% Open the %on/iguration "anage)ent $indo$ of OMCBV4.00 & and c#ic/ SDR%on/iguration "anage)ent M2at Export NE Data %

igure ; * Se#ecting Batch E,port "e Data in SDR Configuration @anagement

(% Choose Se*e t Ne and Export Dire tor- for the config set to .e e,ported in thefo##o$ing dia#ogue .o,%

igure ; ( Se#ecting the Site and Directory to Bac/ up Config Set

% C#ic/! & and $ait unti# the configuration data for the site is e,ported%


46/100


igure ; Successfu# Batch Data Bac/up

8.7.3 Exporting Dr- %onta t Data

8.7.3.1 Exporting User6de/ined Dr- %onta t A*ar) %on/iguration i*e /ro)!"%2V4.00

*% !n the menu of !"%2V4.00 >IS"G? & se#ect SDR "anage)ent M Data%on/iguration MUser6de/ined Dr- %onta t A*ar) %on/iguration %

igure ; + Juerying User;defined Dry Contact #arm Configuration of O@CBV+%))

(% !n the pop;up $indo$& se#ect E,port to ac2uire the U, r-d >"& d_Dr _Co&ta(t_= arm_Co&>"g+rat"o&_V4_00_2xx.xm fi#e%

( ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


47/100


48/100


igure ; = E,porting User;defined Dry Contact #arm Configuration of O@CBV+%**3Temp#ate4

8.3 Upgrading Version 'it $@!"%2S)oot #oo*

There are t$o ta.s in ZIO@CBSmoothToo#8 Data #rans/er and A*ar) #rans/er % Theconfiguration data is upgraded in Data #rans/er & and user;defined dry contactinformation is upgraded in A*ar) #rans/er % Data transfer shou#d .e performed duringthe upgrade from SDRV+%)) to SDRV+%**% !f there is user;defined dry contact& it shou#da#so .e transferred%

8.3.1 %on+erting Data

*% Dou.#e;c#ic/ ZIO@CBSmoothToo#%7ar to start smooth upgrade& and then c#ic/ the

ta. of Data #rans/er %

+ ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


49/100


igure ; < Data Transfer of ZIO@CBSmoothToo#

i##ing !nstruction8

Source Directory8 i## in the directory of the SDRV4.00 data .ac/ed up inOMCBV4.00 of the integrated -ersion%

Destination Directory8 i## in the directory of the data transferred to V4.11 %

Choose Source Version8 Choose 4.00.30.xx %

Choose O@CB Destination Version8 Choose the O@@B -ersion "o%

4.11.10.14Pxx %

R"C !D8 !t is not re2uired for GS@ sing#e mode% or U@TS sing#e mode& fi## inR"C!D corresponding to the .ase station%

BSC !D8 !t is not re2uired for U@TS sing#e mode% or GS@ sing#e mode or GUdua#;mode& fi## in R"C!D corresponding to the .ase station%

(% fter data setting& c#ic/ Data Upgrade to start the smooth data upgrade%


50/100


igure ; Confirming Data Upgrade

% Confirm the source -ersion and destination -ersion& and then c#ic/ Ces to performsmooth data upgrade%

+% During smooth data upgrade and transfer& the DS%P %on/ig $indo$ $i## pop up%@a/e sure a## the data is correct 3/eep the defau#t -a#ue un#ess specia#re2uirement4& and then c#ic/ ! %

igure ;+) Confirming DSCP Config

9% Chec/ Upgrade In/or)ation & ma/e sure the data of a## the sites are transferredsuccessfu##y%

' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


51/100


igure ;+* Upgrading Data Successfu##y

% C#ic/! to comp#ete data transfer%

fter the data is transferred successfu##y& do not c#ose ZIO@CBSmoothToo#% !t $i##.e used to transfer the dry contact a#arm in the fo##o$ing chapter%

8.3.7 #rans/erring Dr- %onta t %ontents

Use ZIO@CBSmoothToo# to transfer the dry contact temp#ate& that is& transfer the user;defined dry contact content in OMCBV4.00 to the OMCB4.11 temp#ate%

*% C#ic/ the #arm Transfer ta.%


52/100


igure ;+( #arm Transfer Ta.

(% !n the A*ar) #rans/er ta.& c#ic/ Sour e i*e 4.00 x)* to choose the user;defineddry contact a#arm fi#e .efore the upgrade& $hich is ac2uired in the preparationprocess% C#ic/ Sour e i*e 4.0: s+ to choose the user;defined dry contact a#armfi#e of OMCBV4.11 & $hich is ac2uired in the preparation process% C#ic/ %on+ertResu*t Sa+e Pat to set the path for sa-ing the transfer resu#t% nd then& c#ic/ Data%on/iguration %on+ert to start the data transfer%

8.4 I)porting Upgraded Data to !"%2V4.11

fter transferring the configuration data and dry contact data $ith

?;OMCBSmooth oo _4.00.30x_4.11.10.14 & import the data to OMCBV4.11 %

8.4.1 I)porting %on/iguration Data

!n OMCBV4.11 %on/iguration "anage)ent & choose 2at !//*ine Re+erse in thedrop;do$n #ist of SDR %on/iguration "anage)ent % Se#ect the site to re-erse dataoff#ine& and then s$itch the re-ersed config set as the master one%

*% Re-erse config set off#ine in .atch%

< ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


53/100


igure ;+ C#ic/ing Batch Off#ine Re-erse

(% !n the pop;up $indo$& set Data dire tor- for sa-ing data source& %on/iguration

La(e* for the ne$ config set generated after data import& and Su(net or5 of thesite% Se#ect the chec/ .o, of site to .e imported& and c#ic/ ! to start data import%

igure ;++ Batch Off#ine Re-erse


54/100


Note:

Configuration >abel cannot be left blank (recommended value$ &mooth ?pgrade), so that itcan be recogni;ed in the later operation.

% 1hen the data is imported successfu##y& the !peration Resu*t $i## pop up%

igure ;+9 Operation Resu#t of Config Set Batch Off#ine Re-erse

+% C#ic/! & and a prompt for confirming $hether to s$itch the configset%

igure ;+ Confirming to S$itch the Configset from S#a-e to @aster State

9% C#ic/! & and the 2at S it %on/igset $indo$ pops up% Se#ect the site to .es$itched& and c#ic/ ! % !n this condition& the config set 7ust imported $i## .es$itched to the master one%

+) ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


55/100


igure ;+= Se#ecting the Site to S$itch Config Set

% !f it is a ne$#y;created site& a prompt $i## pop up indicating the user to app#y for the

mute, right% Se#ect the ne$ site and app#y for the mute, right%

igure ;+< pp#ying for @ute, Right


56/100


=% C#ic/! & and the data .atch off#ine re-erse for smooth upgrade is successfu#%

igure ;+ Comp#eting Config Set S$itch

666666666666666666666666666I)portant Note666666666666666666666666666

D! N!# perform data synchroni?ation% The master config set $i## .e automatica##ysynchroni?ed to the SDR during soft$are -ersion do$n#oadQ

Upon the comp#etion of the a.o-e steps& a#though the site is sho$n asdisconnected in OMCBV4.11 & the .ase station can .e accessed through the te#netprocess in O@CB% !n this situation& the soft$are can sti## .e do$n#oaded andcreated according to the fo##o$;up procedure% 3"ote8 Do not access the .asestation .y typing the te#net command manua##y%4

igure ;9) Fin/ Status of SDR and O@CBV+%** fter Data Upgrade

8.4.7 I)porting Dr- %onta t Data

*% !n the au*t "anage)ent of OMCBV4.11 & open the A*ar) %ode Des riptionSetting $indo$%

+( ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


57/100


(% !n the $indo$ of A*ar) %ode Des ription Setting & c#ic/ the I)port .utton%Choose the operation resu#t 3a fi#e in the (, format4 e,ported in A*ar) #rans/erof ?;OMCBSmooth oo _4.00.30x_4.11.10.14 & and then import the user;

defined dry contact temp#ate%

igure ;9* !mporting Dry Contact Data to O@CBV+%**

% fter the data is imported successfu##y& chec/ $hether the a#arm code is modifiedas the user;defined contents in A*ar) "anage)ent MUser6de/ined A*ar) %odeDes ription Setting and %on/iguration "anage)ent M Dr- %ontra t A*ar)%on/iguration of site%

8.4.3 % e 5 on t e +a*idit- o/ on/iguration data

The data -a#idity chec/ ru#es in OMCBV4.11 are e-en stricter than those in OMCBV4.09 %The data generated off#ine may not .e -a#id in OMCBV4.11 % Therefore& perform data-a#idity chec/ for the data in OMCBV4.11 %

3The fo##o$ing figures are .ased on OMCBV4.11.10.14P04 & the figures inOMCBV4.11.10.08P0 may .e a #itt#e different& .ut the operation procedure is thesame%4

*% !n %on/iguration "anage)ent & open the SDR %on/iguration "anage)entmenu& and c#ic/ %"@6!"%2 %


58/100


igure ;9( C#ic/ing C@I;O@CB

(% Choose @odify data in the fo##o$ing figure%

igure ;9 Choosing @odifying Data i#e

% Choose a## the site to .e -erified& and c#ic/ Next %

++ ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


59/100


igure ;9+ Se#ecting Site

+% !f the data -a#idity chec/ is passed& the fo##o$ing $indo$ pops up% The Status of a##the sites is Un)odi/ied %

C#ic/ %an e* % 3"ote8 This step on#y focuses on data -a#idity chec/ .ut not datamodification% Therefore& do not c#ic/ Next to perform further modificationprocedure%4

igure ;99 Successfu# Data Va#idity Chec/


60/100


61/100


62/100


; So/t are Do n*oad!n this chapter& the soft$are is on#y do$n#oaded .ut not acti-ated% nd therefore& theser-ices in the e,isting net$or/ $i## not .e affected& the operation can .e performed inthe daytime% fter the operations in this chapter& the firm$are and soft$are -ersionsused in the site are sti## those .efore the upgrade% 1hen the firm$are and soft$are areacti-ated and reset according to the smooth;upgrade procedure in the fo##o$ing chapter&the upgrade of the firm$are and soft$are is comp#eted%

Note:

2uring software download, it is not allowed to telnet to the site being upgraded manuall-,otherwise the upgrade ma- fail.

;.1 % e 5ing S-ste) En+iron)ent

The site en-ironment chec/ co-ers t$o parts8 the sufficiency of CC dis/ space& theacti-ation of site BOOT -ersion% The chec/ does not #ead to ser-ice interruptions in the

site% Therefore& the chec/ can .e performed in the day time% !f any pro.#em occurs& thereis enough time to so#-e the pro.#em%

;.1.1 In/*uen e o/ En+iron)ent % e 5 Resu*t on Version Do n*oad

During the smooth upgrade from V4.00 to V4.11.10.14P02 & $hether to do$n#oad theRU soft$are of SDRV4.11 and to de#ete the running F@T -ersion& firm$are -ersion& andRU -ersion is decided according to the dis/ space si?e% The chec/ resu#t of dis/ space$i## .e reported during the en-ironment chec/& .ut no fi#es $i## .e de#eted% The de#etionof fi#es is carried out during the soft$are do$n#oad% !t consists of three situations8

!f RU V4.11 -ersion is re2uired to .e do$n#oaded8

1hen the dis/ space is se-ere#y insufficient& e-en $hen the running F@T&firm$are -ersion& and the current RU -ersion in CC are de#eted& the sparespace is not sufficient for BBU soft$are& en-ironment chec/ fai#ure $i## .ereported%

1hen the dis/ space is sufficient& there is no need to de#ete any fi#es%Do$n#oad the comp#ete soft$are pac/age 3inc#uding BBU soft$are& RUsoft$are& periphera# .oard soft$are& #i/e CE& etc%4%

fter de#eting the running F@T -ersion& do$n#oad soft$are pac/age& inc#uding

RU -ersion%

+< ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


63/100


fter de#eting the running F@T -ersion and firm$are -ersion& do$n#oadsoft$are pac/age& inc#uding RU -ersion%

fter de#eting the running F@T -ersion& firm$are -ersion& and the e,isting

RRU -ersion in CC& do$n#oad soft$are pac/age& inc#uding RU -ersion%

!f RU V4.11 -ersion is not re2uired to .e do$n#oaded8

1hen the spare space is on#y enough for do$n#oading BBU and periphera#.oard soft$are after the running F@T -ersion is de#eted& do$n#oad thesoft$are pac/age of SDRV4.11 & e,c#uding the RU soft$are%

1hen the spare space is on#y enough for do$n#oading BBU and periphera#.oard soft$are after the running F@T -ersion and firm$are -ersion arede#eted& do$n#oad the soft$are pac/age of SDRV4.11 & e,c#uding the RUsoft$are%

1hen the spare space is on#y enough for do$n#oading BBU and periphera#.oard soft$are after the running F@T -ersion& firm$are -ersion& and RU-ersion are de#eted& do$n#oad the soft$are pac/age of SDRV4.11 &e,c#uding the RU soft$are%

!f the chec/ is not passed8

1hen the dis/ space is se-ere#y insufficient& e-en $hen the running F@T&firm$are -ersion& and the current RU -ersion in CC are de#eted& the sparespace is not sufficient for BBU soft$are& en-ironment chec/ fai#ure $i## .ereported%

1hen the system prompt sho$s that the space is sma##er than *) @& theonsite engineers do$n#oad the soft$are pac/age% :o$e-er& after theupgrade& the insufficient dis/ space a#arm $i## .e reported in O@@%Therefore& the onsite engineer shou#d perform dis/ c#earance .efore theupgrade and ma/e sure the a-ai#a.#e space after -ersion do$n#oad is #argerthan *) @%

!f the a-ai#a.#e space is sma##er than *) @& the e,amp#e of en-ironment chec/resu#t is sho$n as fo##o$s8

,esult o& & rm(are "er &y5 7uccess.

,esult o& c%ec! master board space5 Error Code 8rom odeB s 1))))5 s! on master ma n control

board %as no su&& c ent space# please clean up & les on CC. "a lable space5 4946:));< Be do(nload

8 le s ze5 4)619494< $%e s ze o& space re u red5 96>96):.

,esult o& c%ec! sla"e board space5 Error Code 8rom odeB s 1)))15 "a lable space o& d s! on

sla"e ma n control board s less t%an 1)M a&ter reduc n3 t%e s ze o& do(nload n3 & les re u red# please

clean up & les on CC. "a lable space5 49>))44)< Be do(nload 8 le s ze5 4)619494< $%e s ze o& space

re u red5 9)))>>4.

d"ance s tuat on o& "ers on do(nload5 delete old +M$ "ers on< delete & rm(are< delete old ,,- "ers ona+ t 520136 S+ (od d ,(r"pt"o&@ S'_BOO _!S &

R+&&"&g r,"o& >a+ t 520136 S+ (od d ,(r"pt"o&@S'_S%=_MMCBOO & R+&&"&g r,"o& >a+ t 520136 S+ (od


78/100


d ,(r"pt"o&@ S'_PM_MMCBOO & R+&&"&g r,"o& >a+ t 520136S+ (od d ,(r"pt"o&@ S'_S==_MMCBOO & R+&&"&g r,"o&

>a+ t 520136 S+ (od d ,(r"pt"o&@ S'_BOO _UBP: & R+&&"&g

r,"o& >a+ t 520136 S+ (od d ,(r"pt"o&@ S'_=MC_MMCBOO 6&or R+&&"&g r,"o& >a+ t 520136 S+ (od d ,(r"pt"o&@S'_BOO _CC is sho$n in Detai*s & it means that the origina# firm$are -ersionis de#eted during the do$n#oad of the ne$ -ersion%

% 1hen R+&&"&g r,"o& >a+ t520136 S'_D R2 & R+&&"&g r,"o&>a+ t520136 S'_D R & R+&&"&g r,"o& >a+ t520136 211 &R+&&"&g r,"o& >a+ t520136 S'_D R2_!P:= & R+&&"&g r,"o&

>a+ t520136 *747 & or R+&&"&g r,"o& >a+ t520136S'_D R_!P:= is sho$n in Detai*s & it means that the RU -ersion of

SDRV4.00 is de#eted during the do$n#oad of the ne$ -ersion% !n this case& $eha-e to do$n#oad the soft$are -ersion pac/age of SDRV4.00 from the

OMCBV4.00 %

+ ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


79/100


< So/t are A ti+ation

Note:

&ervice will be down due to software activation, thus the operation must be performed in thewee hours

The upgrade of soft$are must .e performed in the "u*tip*e "ode Station So/t are"anage)ent $indo$ of O@CBV+%**%Before soft$are acti-ation& the current a#arm and

dynamic management information shou#d .e .ac/ed up%


80/100



81/100


82/100


igure


83/100


igure


84/100


85/100


86/100


: o**o 6up 'or5 o/ Upgrade

:.1 A ti+ating Per/or)an e "easure)ent #as5

!n E@S Per/or)an e "anage)ent & chec/ $hether the .ase station measurement tas/status is consistent and acti-ated% !f it is not acti-ated& right;c#ic/ the test measurementto perform manua# acti-ation% !f its status is not consistent& perform manua#synchroni?ation%

:.7 Per/or)ing ,ea*t % e 5 and PI "onitoringA/ter Upgrade

*% Chec/ the rea#;time a#arms and notices and ma/e sure the system runs norma##yafter the upgrade% E,port and sa-e the rea#;time a#arm records& and compare them$ith the records .efore the upgrade% !f there are no ne$ a#arms& it means this itempasses the chec/%

(% Chec/ the #in/ status% E,port and sa-e the origina# information& and compare it $iththe information .efore the upgrade% !f the #in/ status remains unchanged& it meansthis item passes the chec/%

% Chec/ the ce## status% E,port and sa-e the origina# information& and compare it $iththe information co##ected .efore the upgrade% !f the ce## status remains the same& orthe ce## status is norma# after the upgrade& it means this item passes the chec/% !fthe ce## status is a.norma# after the upgrade& record the reasons and report thesituation to the re#e-ant personne#%

+% The ce##s .#oc/ed .efore the upgrade are un.#oc/ed after the upgrade% ccordingto ce## .#oc/ status information recorded .efore upgrade& .#oc/ these ce##s again%

:.3 #esting on Site

rrange onsite testing after the upgrade% The corresponding test items are pro-ided .ythe net$or/ optimi?ation team%

=( ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


87/100


:.4 "onitoring Per/or)an e A/ter Upgrade

:.4.1 PI "onitoring on t e Upgrade Da- fter the ne$ "odeB -ersion is successfu##y started& o.ser-e the /ey indicators for *;(hours% @a/e sure that no performance indicators deteriorate due to the upgrade% The/ey performance indicators to .e o.ser-ed are8

GS@ P!s8

NE #-pe #-pe PI

BSC Ce##

SDCC: in ser-ice rate

SDCC: in congestion rate

SDCC: channe# in ca## drop rate

TC: in ser-ice rate

TC: in congestion rate

TC: in ca## drop rate

:ando-er success rate

Radio s$itch rate

UF TB Esta.#ishment Success Rate

DF TB Esta.#ishment Success Rate

DF RFC Data Throughput

UF RFC Data Throughput

U@TS P!s8

NE #-pe #-pe PI

R"C Ce##

"um.er of RRC Connection Esta.#ishment ttempt

Ratio of Successfu# R"C CS R B Esta.#ishment

Ratio of Successfu# R"C PS R B Esta.#ishment

Ratio of R"C CS Ca## Drop

Ratio of R"C PS Ca## Drop

Ratio of radio Ca## Drop

"um.er of ttempted S:O

R"C S:O success rate

R"C R B Esta.#ishment Success Rate

RRC Esta.#ishment Success Rate

:.4.7 %ontinuous PI "onitoring A/ter Upgrade >3 da-s?

fter the upgrade& some BSC>R"C P!s need continuous monitoring% The ma7or P!sare #isted in the fo##o$ing ta.#e8


88/100


GS@ P!s8

NE t-pe #-pe PI

BSC Ce##

SDCC: in ser-ice rate

SDCC: in congestion rateSDCC: channe# in ca## drop rate

TC: in ser-ice rate

TC: in congestion rate

TC: in ca## drop rate3e,c#ude hando-er4

TC: in ca## drop rate3inc#ude hando-er4

"um.er of TC: ca## drop

TC: a##ocate fai#ure rate

:ando-er success rate

"um.er of hando-er re2uest:ando-er success rate

Dua# .and hando-er success rate

Radio s$itch rate

Ratio of Up#in/ TB Esta.#ish Fin/ successfu##y

Ratio of Do$n#in/ TB Esta.#ish Fin/ successfu##y

Ratio of GPRS RFC Up#in/ .#oc/ resent

Ratio of GPRS RFC Do$n#in/ .#oc/ resent

Ratio of EGPRS RFC Up#in/ .#oc/ resent

Ratio of EGPRS RFC Do$n#in/ .#oc/ resent

DF RFC Data Throughput

UF RFC Data Throughput

U@TS P!s8

NE #-pe #-pe PI

R"C Ce## "um.er of RRC Connection Esta.#ishment ttempt

Ratio of Successfu# R"C CS R B Esta.#ishment3ce##4

Ratio of Successfu# R"C PS R B Esta.#ishment

Ratio of R"C CS Ca## Drop

Ratio of R"C PS Ca## DropRatio of radio Ca## Drop

"um.er of ttempted S:O

R"C S:O success rate

!ntra;R"C co;fre2uency hard :O success rate

"um.er of !ntra;R"C co;fre2uency hard :O attempts

!nter;R"C co;fre2uency hard :O success rate

"um.er of Cross;!ur !nter;R"C co;fre2uency hard :Oattempts

!ntra;R"C hetero;fre2uency hard :O success rate

=+ ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


89/100


90/100


91/100


igure *);< Version Ro##.ac/

(% Se#ect 4.00x as the Sour e +ersion & and c#ic/ Next %

igure *); ) Se#ecting Source Version

% Confirm Version Pac/age%

igure *); * Confirming the Version Pac/age $ith Ro##.ac/ Script

+% !n the Upgrade #as5 List & -ie$ the progress for the tas/% 1hen !+erF !perationSu ess is sho$n in ,int & the .ase station starts to restart% !t ta/es a.out *9minutes to comp#ete the restart%


92/100


igure *); ( Progress for Base Station Ro##.ac/ Command E,ecution

10.7.7 Esta(*is ing Lin5 2et een 2ase Station and !"%2V4.00

fter -ersion ro##.ac/& the .ase station $i## .e disconnected from OMCBV4.11automatica##y& .ut connected $ith OMCBV4.00 % !f the step is not comp#etedautomatica##y& re#ease the #in/ in OMCBV4.11 manua##y& and then reco-er the #in/ inOMCBV4.00 manua##y%

10.7.3 %on/ir)ing Su ess/u* Ro**(a 5 o/ So/t are Version Pa 5age

1hen the .ase station runs norma##y& confirm the soft$are -ersion of the .ase station8

igure *); Juerying Running @ain Version fter Base Station Ro##.ac/

10.7.4 A*ar) #rou(*es ooting

!f the a#arms for 5 R+&&"&g r,"o& >a+ t 6 appear after -ersion ro##.ac/& it is caused.y the re#ated -ersion de#etion during the upgrade% The missing -ersions can .e -ie$edfrom the a#arm description% To remo-e the a#arms& $e need to do$n#oad the

corresponding -ersions again%

=< ' ()*+ZTE CORPOR T!O"% ## rights reser-ed% ZTE Confidentia# Proprietary


93/100


!f the a#arms are a.out firm$are -ersion& do$n#oad the firm$are -ersion pac/age ofsmooth upgrade again%

!f the a#arms are a.out soft$are -ersion or F@T& do$n#oad the soft$are -ersionpac/age that is used .efore the upgrade%

*% 1hen 5 R+&&"&g r,"o& >a+ tA S'_a+ t520136 S+ (odd ,(r"pt"o&@S'_!C%_MMCBOO & R+&&"&g r,"o& >a+ t520136

S+ (od d ,(r"pt"o&@S'_BOO _!S & R+&&"&g r,"o&>a+ t520136 S+ (od d ,(r"pt"o&@S'_S%=_MMCBOO & R+&&"&g

r,"o& >a+ t520136 S+ (od d ,(r"pt"o&@S'_PM_MMCBOO &R+&&"&g r,"o& >a+ t520136S+ (od

d ,(r"pt"o&@S'_S==_MMCBOO & R+&&"&g r,"o& >a+ t520136S+ (od d ,(r"pt"o&@S'_BOO _UBP: & R+&&"&g r,"o&

>a+ t520136 S+ (od d ,(r"pt"o&@S'_=MC_MMCBOO 6& or R+&&"&gr,"o& >a+ t520136 S+ (od d ,(r"pt"o&@S'_BOO _CC e,ists& it

means that the firm$are -ersion is de#eted during the -ersion do$n#oad% !n thiscase& do$n#oad the firm$are -ersion pac/age of SDRV4.11 from the OMCBV4.00 %Refer to 9%* Do$n#oading irm$are Version Pac/age for detai#s% "ote that& if thesea#arms are reported& it indicates the firm$are -ersion information recorded in SDRdata.ase is inconsistent $ith actua# -ersion& .ut it is not a fau#t during the firm$are


94/100


running% Therefore& do$n#oad the ne$ firm$are -ersion again 3the SDR information$i## .e refreshed automatica##y during do$n#oad4& the -ersion does not need to .eacti-ated%

% 1hen R+&&"&g r,"o& >a+ t520136 S'_D R2 & R+&&"&g r,"o&>a+ t520136 S'_D R A R+&&"&g r,"o& >a+ t520136 211 &R+&&"&g r,"o& >a+ t520136 S'_D R2_!P:= & R+&&"&g r,"o&

>a+ t520136 *747 & or R+&&"&g r,"o& >a+ t520136 S'_D R_!P:=e,ists& it means that the RU -ersion of SDRV4.00 is de#eted during the -ersiondo$n#oad% !n this case& do$n#oad the soft$are -ersion pac/age of SDRV4.00 fromthe OMCBV4.00 %

Note:0. *he above operations are re uired onl- when some versions are deleted during the

download of the new software version. Besides, onl- download of the correspondingversions is enough, and it is not necessar- to activate them.

1. "f no versions are deleted during the download of the new software version, the aboveoperations can be omitted.


95/100


11 Se ond Upgrade A/ter Ro**(a 5The ro##.ac/ on#y $or/s for the soft$are -ersion& .ut not the firm$are -ersion% ndtherefore& $hen the -ersion is upgraded again& the firm$are -ersion pac/age is notre2uired to .e do$n#oaded and acti-ated%

1hen the upgrade is performed again& ma/e sure the site data is unchanged compared$ith the data .efore the first upgrade% !f the data is modified& e,port the modifiedconfiguration data& and perform smooth upgrade again% nd then& import theOMCBV4.11 data%

The main procedure of second upgrade inc#udes en-ironment chec/& soft$aredo$n#oad& acti-ation& and reset% The detai#ed operation steps are the same as that forthe first upgrade& $hich are not specified here% Refer to = Soft$are Do$n#oad and < Soft$are cti-ation for detai#s%


96/100


17 %o))issioning Site in V4.00 De*i+er-Version

or the office in V4.11 -ersion& if the factory de#i-ery -ersion is SDRV4.00 & upgrade the-ersion from V4.00 to V4.11 during site commissioning%

There are t$o site commissioning modes for different upgrade modes8

*% Commission the site in the integrated OMCBV4.00 -ersion% Upgrade soft$are-ersion in O@@% nd then commission the site in OMCBV4.11 -ersion%

(% Upgrade CC to V4.11 $ith P@T% nd then commission the site in the norma#$ay in OMCBV4.11 %

no *edge&

*he new /&?D//? products (/&?91, /9990, /9991, and /999 ) cannot be configured inthe integrated OMCB version. *herefore, if the first mode is used, when the new /&?D//?

products are configured, the previous /&?D//? products should be configured temporaril-.After version upgrade, modif- the data configuration and download software version again inOMCBV4.11 .

17.1 "ain Pro edure

This chapter focuses on the first commissioning mode% The commissioning and upgrade$ith P@T in the second mode are not specified here%

17.1.1 Preparations

*% Prepare soft$are -ersion in SDRV4.00.30.08 series%

(% Configure SDRV4.00 data in the O@CB of the integrated -ersion%

17.1.7 Esta(*is ing Site Lin5

*% Site !nsta##ation

(% !nterconnect the transmission%


97/100


1hen BSC& site& transmission& and data are a## correct& the #in/ .et$een SDR andO@CB in the integrated -ersion can .e esta.#ished 3!f E* transmission is used& it isnot necessary to configure data on site& .ut the site can esta.#ish #in/ $ith O@CBdirect#y% !f E transmission is used& go to the site to perform data configuration4%

17.1.3 Version Upgrade

*% Dis/ c#earance

The ma7or function is to c#ean up RU running -ersion% The s#a-e -ersion pac/agemay not e,ist in the ne$#y;de#i-ered e2uipment% !n this situation& there is no need toperform the dis/ c#eanup% Refer to %9 Dis/ C#earance for detai#s%

(% irm$are upgrade

Refer to 9%* Do$n#oading irm$are Version Pac/age and 9%( cti-ating irm$areVersion Pac/age

% Data upgrade

Refer to Data Upgrade %

+% Soft$are do$n#oad

Refer to = Soft$are Do$n#oad %

9% Soft$are acti-ation

Refer to < Soft$are cti-ation %

17.1.4 "odi/-ing %on/iguration Data

*% ccording the RSU>RRU modu#e type configured on site& modify the data inO@CBV+%** through C@I%

(% @odify and then synchroni?e the site data% Do$n#oad and acti-ate soft$are again in

O@@% @a/e sure the ne$ soft$are is do$n#oaded to the .ase station%


98/100


13 #rou(*es ooting o/ %o))on au*ts*% !f 5=pp "(at"o& ,o>t#ar mo&"tor"&g a arm 6 in the .oard is reported& .ut

5Board (omm+&"(at"o& "&) ", "&t rr+pt d 6 is not& reset the fau#ty .oardin SDR D-na)i Data "anage)ent % !f the .oard cannot .e reset in O@CB& #og into the .oard& and perform the re.oot command to reset it%

(% !f 5Board "&"t"a "Eat"o& a arm 6 of a## the .oards in a site is reported& andCC .oard is reset repeated#y& c#ic/ Po er o// and reset in D-na)i Data"anage)ent of O@CB%

% !n order to get the #atest SDR a#arm information& de#ete the a#arms of the site inA*ar) "anage)ent & and synchroni?e the a#arms% !f the transmission is poor& thea#arms of the site may not .e reported or c#eared in time%

+% fter BS< )) and BS< ) are upgraded to V4.11.10.14P02 & if ro##.ac/ isre2uired& the 5 Board (omm+&"(at"o& "&) ", "&t rr+pt d 6 a#arm $i## .ereported in CE in the BC ca.inet% fter the #in/ is disconnected& the CE fanrotation speed depends on the temperature of the BC ca.inet% 3!f the temperature ishigh& the fan rotates faster% Thus the sound is #ouder%4 !n this situation& the ser-iceis not affected%

9% s for the site $ith cascaded BBU& if $e 5acti-ate and reset6 .oth the upper;#e-e#site and #o$er;#e-e# site at the same time& the acti-ation of the #o$er;#e-e# site mayend in fai#ure% cti-ate the #o$er;#e-e# site first% !f they are acti-ated at the sametime and the acti-ation of the #o$er;#e-e# site ends in fai#ure& $e can acti-ate itagain%


99/100


AppA Upgrade % e 5*ist

A.1 Pre6Upgrade % e 5*ist

No. Ite) %ontent Re orded Re)ar5s

*

The master -ersion pac/age "os%3inc#uding firm$are4 for a## thesites& and the -ersion "os% of each.oard& CPU& and PGCurrent -ersion num.er

Comp#ete !ncomp#ete To .e o.tained.y 2ueryingfrom 5CurrentSDR -ersioninformation6 inO@CB

( Bac/up of foreground ZDB fi#es forBSC Comp#ete !ncomp#ete

Bac/up of foreground ,m# fi#es forSDR Comp#ete

!ncomp#ete

Perform datare-erse to SDRand e,port thedata .eforeupgrade for thepurpose ofdatarestoration%

= SDR #arm in a#arm management es "o

< Channe# status in dynamicmanagement "orma# .norma#

Channe# occupation in dynamicmanagement "orma#

.norma#

*) Site running status in performancestatistic report "orma# .norma#

** Record of interrupted>notcommissioned site es "o

*( Test @S es "o

* Test GPRS or EDGE @S es "o

*+

Emergency de-ices& #i/e #aptopcomputer& net$or/ ca.#e the#aptop is e2uipped $ith F@TV+%))% )%)=>)< and V+%))%(*%)9and has the configuration data #i/e.ac/up of pre;upgrade data instore%

es "o

*9 Spare .oards>parts es "o


100/100


A.7 Post6Upgrade % e 5*istNo. Ite) %ontent Re orded Re)ar5s

*SDR is #in/ up or not Comp#ete !ncomp#ete

(Synchroni?e modify>a## ta.#es toSDR and on#ine up#oad data areO or not

Comp#ete !ncomp#ete

ny ne$ a#arm of SDR es "o

Channe# status in dynamicmanagement "orma#

.norma#

= Channe# occupation in dynamicmanagement "orma# .norma#

< Site running status in performance

statistic report"orma# .norma#

Voice ser-ice is norma# .y CJT "orma# .norma#

*) Data ser-ice is norma# .y CJT "orma# .norma#

** ny ser-ice is norma# .y DT "orma# .norma#