8 22

2214

Suggestion: Installation with 2 adults

Screw P12 M6 x10 first, but do not tighten ittighten P14 M6 x 40, then P12.

Slide 2 Crossbar Center Rails(P4) into the two Crossbar Ends(P3)

For 2 assemblies that will be the outer legs of the desk base, attach a Foot(P2) with 4 M6.14 Machine Screws(p11) and tighten screws in a cross pattern.

For 1 assembly that will be the center leg of the desk base, and tighten screws in a cross pattern.

43"W x 24"D

If the desktop is pre-drilled, perform Step5 before Step4, If the desktop is pre-drilled, lock the position of the Crossbar Center Rails(P4) using 10 M6*10 Machine Screws(P12) Remember, maximum width is 74".

Attach the 2-leg desk base assembly to the underside of the desktop using 12 M5*16 Wood screws(P13)：

Use 2 M5*16 wood screws(P4) to attach the Switch to the desktop.