KCV-434SD / KCV-D434SD MANUAL

www.kocom.co.kr

SD Card MemoryCOLOR HANDSFREE

[ Operating Installation Manual ]

■4.3" Digital Color LCD Monitor

■Slim, Compact & Luxury Design

■Easy to operate using OSD menu & Touch key

■Digital Photo Album

■Digital Video Recorder

·Motion Detection

·Memory Size : up to 32GB(SD Card interface)

·Video Format : Moving picture(MPEG-4), Still cut : JPEG

■Multiple language support

·English, Spanish, French and Russian

■Connection up to 2 Door cameras

■Guard Phone, Lobby Phone Operating

■Call & Communication with visitor & Door open function

■Door opener connectable from camera

KCV-434SD / KCV-D434SD

Connection door Camera

KC-MC24 KC-MC20 KC-C60 KC-MC30 KLP-C420White Black

Monitor color

2

Cautions for set-up

Warnings for Usage

Cautions for Repairs and Maintenance

·Do not install this unit near the water and dust, for example, in a bathroom or near the washing machine. It caused fire and electric shock.·Do not install this unit near the fire, for example, near kitchen sink, heater or the like.·Do not install near the noxious gar such as Hydrogen Sulfide, metal power and the like.·Do not install near the water and chemicals.·Do not give any damage, break and modify the plug. Overloading, heating, pulling causes the damage.·Do not place the plug near the heater. The damaged code causes fire and electric shock. Do not pull the power code when unplugging. ·The damaged code causes fire and eclectic shock. Must pull with plug. Do not touch with wet hands. It causes the electric shock.·Do not use any other voltage, except the marked regular voltage.·Do not use the power terminal at the units to other electric device except the designed device. ·Do not install the units at the leaking place if it doesn’t have any waterproof mark. Do not install the unit when the power is on.·Install the circuit breaker after checking the safety such as electric shock and leakage. Turn off the power before you install or A/S

·Check the suitability of the lines for installing when you use the exiting lines.·Do the wiring work by using the designed material.·Connect the electric wire with the designed ways and ground.·Do not connect with any other devices except the designed devices to compose the system.

·Unplug electric wire and communication lines from the units before moving to another place.

For safe use, please stick to the following cautions.

Cautions for safety

·Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.

·Set the device of the wall-mounted type not to fall. Falling from an earthquake causes personal injury.

·The law limits distributing the power lines to an authorized person from government. The work from an unaurhtorized person cause fire or electric shock.·Place this unit securely on a stable surface. Serious damafe and/or injury may result if the unit falls.·Do not set up this unit near the leaking place because it may expose you to dangerous voltages or other risks.·Even if your product is water proof, do not install it slanted place of water leakage, which can a short circuit.·Fix the product on the wall safely according to the installation guideline to prevent any damage or injury.ㆍDon’t put any stuff in 30cm around the monitor, not to block the air hole.

·The work of distributing wires needs skills and experiences. So please, for assistance, contact your dealer or call service center.·The communication lines should be built in being distant from the power source. This may result in the risk of fire, electric shock and communication disorder.·Setting the communication lines in a high humid place such as outside without any protection from rain causes the communication disorder.·Keep the hook at the wall-mounted device safe. The hook may cause the physical injury.·Think about the thickness and quality of wall material. The unqualified material may make the device fall.

·Keep the inside of the device clean. Having the dust inside without any cleaning for a long time causes the fire. If necessary, contact your dealer or service center to get cleaning service.

Caution

Warning

·Unplug this device when you want to check the inside. If there is no plug, please, turn off the circuit breaker.·Unplug this device when you try to move it to another place. If the electric line is connected inside of the unit, please contact your dealer or service center.

·Please, save this manual after reading these instructions carefully. ·Read and understand all instructions to set up rightly.·This Cautions for Safety may include items that are not contained in specifications of the product that consumer purchases.·If you need assistance with the set-up or operation, please contact with A/S center.

To help our customers to understand this manual, to prevent any personal injury or property damage, some marks are used in the manual. The marks and the drawing signs are below. Please, understand the marks before reading the manual.

Sign to show what not to do.

Sign to tell you that you should follow the instructions.

Sign to tell you that you can't disassemble this unit.

Sing to tell you that you need more attention including (high voltages, electric shock, danger, warning)

Sign to tell you that you must unplug the unit.

Mishandling the device with ignoring this sign may result in serious injury or death.

Mishandling the device with ignoring this sign may result physical injury or material damage.

The important marks in the manual.

The meaning of the drawing signs.

3

Caution

Cautions for Use

Things You Need to Know

Videophone

Cautions

Cautions for Abnormality

Safety Instructions, Warnings and Cautions of Each System

·This product is designed as a home videophone and cannot use continuously like monitor camera. ·If there is temperature difference between inner part of camera and surrounding, dew condensation occurs on camera lens and may disturb image. If dew condensation is removed from camera lens, image quality recovers. ·White LED light examination range is narrower than camera shot range at night, so there is less amount of light at night than day. So it is difficult to see the face in low illumination condition due to noise increase on screen, but it is not from defect. ·Monitor screen (liquid crystal panel) is not in defect when some pixels always light or black out. ·Please install monitor and camera over 5cm away. Also, avoid installing at a place with too much noise, because too much noise around camera causes phone call inferiority.·Do not place an object within 20cm in front of monitor. It causes phone call inferiority, especially because microphone is installed at the top of monitor. ·If strong light such as sunlight flows into camera module, screen saturation (or strange mark) and image shaking might occur.·This is not a defect, so please do not install camera where a direct ray of light do not flow if possible.

·Separate the AC/DC lines with the hook of the wall-mounted type when installing. 쪾 ·Connect the lines after peeling the wires properly.·Do not distribute signal line with AC line. ·Use the designed driver to connect the lines to terminal.·Do not clean the LCD with the damp cloth for cleaning. Use the only dry and soft cloth. ·Do not install the main gate monitor at the leaking place.

·In some cases there is occurrence of product destruction, malfunction, noise mixing and picture quality deterioration due to mixing of other tool's induced. voltage or thunder with communication wiring of monitor/camera, monitor/extended monitor. Do not wire with power line such as outdoor wiring or AC power, or phones and other tools. ·You cannot use it if you incorrectly wire the AC voltage between monitor/camera, monitor/extended monitor. Call the store or agency where you purchased this product and consult to solve the problem. Beware that unfixable damage might be caused due to authorizing AC voltage on communication wiring of monitor/camera, monitor/extended monitor. ·Do not ever disjoint this product. It may cause electrocution accident when touching high-voltage circuit inside this product. ·Outside power authorizing this product must be confirmed of product description and use rated voltage. Beware that if higher voltage is authorized, unfixable damage might be caused due to product destruction. ·Power must be connected to domestic voltage (product rated voltage) consent or interior wiring. If connected to other motive power or inverter-type power, product destruction, noise mixing, and picture distortion may occur. ·Do not drop this product. Glass is used for monitor and might break, or cause other circuit inferiority. In such case, immediately turn down the power switch, and call to consult agency or store in which this product was purchased. ·Keep away from any conditions where water splatters or falls. Do not place anything containing water like a vase on the product.·If installed near transmission antenna such as broadcasting station, electric wave may mix and cause picture distortion or voice mixing. ·Avoid installing near tools with strong electromagnetic waves such as microwaves and cell phones, or it may cause picture distortion. ·Do not install monitor in following places. ① Above or around water heater, rice-cooker, heater ② Place exposed to direct rays of the sun ③ Place with temperature below 0'C such as cold store ④ Place with high humidity such as bathroom, washroom, heated room ⑤ Place with a lot of gas, dust, smoke ⑥ Dangerous place with sprays of water or chemicals·Do not wipe with insecticide, drugs or chemicals such as thinner and alcohol, or it may damage the surface of this product. ·Beware of occurrence of image quality deterioration or malfunction from cause of humidity due to penetration of chemicals or water into camera’s urea resins. ·As in the picture, it prevents temperature difference of camera (outside) and monitor (inside), and removes dew condensation caused by humidity of camera window. ·Camera must be installed when wall cement is completely dry. ·When product is installed in winter below -5'C, wait for approximately 2 hours to connect. Dew formation in monitor and camera due to temperature difference inside and outside may cause product defect. ·Avoid installing monitor and camera in place directly exposed to heat or where gas noxiousness is highly occurring.

·Do not disassemble this unit at will as this device is composed by precision parts. 쪾 ·Install the unit by following the set-up instructions of Kocom.·Do not touch or insert any foreign substances, for example, sticker, magnetic, opener and the like.·Make U-type at the end of wires as the rain can effect on the system by following the wires during the rainy season.

·This unit is not designed for security purpose. 쪾·Do not handle the unit with the wet hands.·Do not place a pot with water or a small metal material on the Units.·Do not cover the ventilating opening or put any metal material in the units. 쪾·During thunderstorms, avoid using this unit. There may be a remote risk of an electric shock from lighting. ·Do not modify the unit. ·Open the main gate after checking ID if the image and sound system do not work. Call A/S

·Change the damaged electric code. ·Unplug this unit from plug socket and refer servicing to an authorized service center when the following conditions occur:·If liquid has been spilled into the unit. 쪾·If the unit does not work normally by following the operating instructions.·If the unit exhibits a distinct change in performance. ·If the unit has been dropped or physically damaged.ㆍThe mains plug, as a disconnection device, shall remain readily accessible by the user.

·Do not disassemble the back and cabinet cover.

4

Installation location

After fix the rear bracket with 4 screw, put the Door Camera into the grooves of rear bracket, and then fix it with hexagon screws and stick the finishing materials.

■ Monitor installation

■Door camera installation

KC -MC30

KC-MC24

KC-MC20

KC-C60

■ Directly connecting cut-off power cord with power wire1) Do not do such electric work on your own. Installing product in this way requires reliance on electric installation man with electric work license.2) Insulate with insulating tape while cutting off power cord and connecting with power wire so electric wire metal does not expose. Contact between exposed electric wires cause fire or electric shock accident.3) Such electric work requires connection after interception of supplied power.

1) Remove wall-hanger bracket metal behind monitor.2) Install wall-hanger bracket metal on 1 type box or wall with attached Vis.3) Connect wiring to monitor back terminal referring to product connection diagram.4) Hang monitor on wall-hanging metal, and fix monitor on wall- hanger bracket metal using attached Vis.5) Plug monitor’s power plug into consent and check to see if the power switch is [ON] on the left side of monitor.

Wall Screw(2X8mm)

Main body supporter

Screw(3X5mm)

Wall Screw(4X16mm) Camera

front

Screw(4X10mm)

Wall

baby support

Upward supportScrew(2.6X6mm)

Camerafront

Screw(4X10mm)

■ Monitor installation location·Standard monitor installation height is about 1,500mm where screen center is at eye level. In this case, wall-hanging metal center (center of piping) is 1,450mm above ground level.·Standard installation height

■ Caution of camera installation·Avoid installing camera exposed to direct ray of light (and sun).·Beware backlight and darkness of visitor’s face, which makes identification difficult.·Avoid installing camera in places such as the following picture. (1) Place illuminating sky as background (2) Place with white wall reflecting direct ray of light (3) Place with direct ray of light·Standard installation in height

■ Camera installation location·Camera installation in height Standard camera installation height is when lens is about 1,400mm above the floor. In this case, camera stack center (piping box) is above 1,390mm above ground level.·Standard installation in height

Wall

4X25mmScrew

4X8mmScrew

Rear Bracket

Camera Terminal Block

Camera front

Wrench

Name plate

Standard wire strip specification : 6~7mmStandard wire (AWG) : 16~24(0.5mm~1.2mm)

※

5

AC100V-AC240V 50/60Hz DC 15V-2A (JPW128KA1502N05)

Standby 3W(±20%), Max 12W(±20%)

0℃ ~ +40℃

4.3 Inch color LCD

Handsfree type

Door camaera wiring - Polarized 4 lines (VCC[12V]/GND/VOICE/VIDEO)

Surface mount

140(W) X 195(H) X 32(D) mm

SDHC 4GB~32GB, MLC TYPE, CLASS 6(minimum)

Components of product

Specifications

■ Door Camera

■ SD CARD(※Option)

[KC-MC24]

[KC-MC30] [KC-MC20]

[KC-C60]

■ Wire

■ Screw for fixing monitor

4 Pin cable for camera 2ea

4X25mm 4ea(Flat head type)

Screws for fixing mainbody on the wall

Screws for fixing mainbody on the wall

Finishing rubber

Screws for fixing camerato main frame supporter

Screws for fixing camera

Screws for fixing camerato main frame supporter

Screws for fixing camera main body supporter

Upward adjustingsupporter for lens angle

Maximum Available Capacity : 32GB(SDHC)SAND DISK - MLC Method, CLASS-4KING MAX - MLC Method, CLASS-6Bareun Electronics - MLC Method, CLASS-4

※Do not use any SD card besides the one that is compatible. This may damage the product. The company will not be responsible for such damage.

Screw for fixing camera"L" wench

Scre cap (KC-MB30)

Screw for fixing camera

Main bodySupporter

Main bodySupporter

Main bodySupporter

Main bodySupporter

MONITOR

DOORCAMERA

Model No.

Model No. KC-MC30 KC-MC24 KC-C60 KC-MC20

KCV-434SD KCV-D434SD Power Source

Power Consumption

Operating Temperature

LCD

Communication Systerm

Wiring

Mount Type

Dimension

SD Card

Power Source

Power Consumption

Operating Temperature

DC 12V±1V (Power from Monitor)

Max 3W

-10℃ ~ +50℃

4X10mm

4X25mm

4X8mm

2.6X6mm

3X8mm 1ea

■ A Wall hanger frame

4X10mm

or

4X16mm

3X5mm

2X8mm

■ Monitor

Door Camera Wiring - Polarzied 4 lines (VCC[12V]/GND/VOICE/VIDEO)※

6

Name and Functions of each part

■ Monitor

·Right Side

11

10

9

·Front

1

2

5 6 7 8

3

4

·Left Side

12

·Back

13

14

⑨ Call sound volume adjusting switch

⑩ Speaking volume adjusting switch

⑪ Power Switch

⑫ SD Card input section

⑬ Camera connection teminal

⑭ AC Power Cord

① LCD Monitor

② Speaker

③ Microphone

④ State LED

⑤ Menu Button

⑥ Monitor Button

⑦ Talk & Guard Button

⑧ Door open Button

■ The back side

FG(FRAME GROUND)

①②③④⑤⑥

⑦

⑧

KC-MC30 KC-MC20

⑤⑥① ② ③ ④

④ ③ ② ①

KC-MC24 KC-C60

① VCC

② GND

③ Audio

④ Video

⑤&⑥ Door (Non-Polarity)

⑦ Camera angle knob

(Only KC-MC/MB30)

⑧ Wire clamp

■ The front side

①

②

③④

⑤

⑥

KC-MC30 KC-MC20

③

②

④

⑤

①

KC-MC24 KC-C60

① C-Mic : To communicate with Monitor

② Camera Lens

③ LED

④ Speaker : When visitor calls, the voice from

monitor comes out of the speaker.

⑤ Call Button : By pressing the button, the related

house will be called.

⑥ Name plate

7

Product connection diagram

■ System configurations(Camera Mode)

■ System configurations(Guard Mode)

DC Door opener

DC Door opener

External power input

External power input

2wire

2wire

Polarized 4wire

Polarized 4wire

Door Camera

Door Camera

KCV-434SD

DC Door opener

Lobby Phone

Guard Phone

External power input

2wire

4wire

Polarized 4wire

Polarized 4wire

Door Camera

KVS-A4P / KVS-A8PReapter

KCV-434SD

8

■ Name of each connection port ■ Camera connection wiring

■ Cable requirement - Based on distance from a camera to the monitor

1234

TO CAMERA1. VCC2. GND3. AUDIO4. VIDEO

·Upto 100M : CAT5 cable

①②③④

①②③④

1

12

1

41

41

2

1 6

①②③④ ①②③④

CAM 2 CAM 1

※ Caution for Camera Installation Because of condition or atmosphere, Monitor can't detect automatically NTSC or PAL. In that case, turn the monitor power off and on again.

※According to outside environment, you may view the images somewhat unclear. However, they do not result from any defect or trouble of the product.

OrangeW/Orange

GreenW/Orange

BlueW/Orange

BrownW/Orange

① VCC double up

② GND double up

③ Audio double up

④ Video double up

In case of more than 50m of CAT5 cable length, the screen and voice quality can get lower. But the sympthom is not a kind of fault. So less than 50m is recommended. ·Upto 50M : TIV 0.65㎟cable·Upto 100M : Over TIV 0.8㎟cable·Upto 150M : TIV 0.8㎟cable + RG-59 / U RG-59 / U (Coaxial cable) for Video signal (Connect core to Video & shield to GND)

CAT5 wire configuration※※

Product connection diagram

9

While 'Talk' on, the door open button [ ]and the door will be opened.About 5 seconds after pushing the button, stop the communication automafically.

Push the talk button [ ] again and stop the communication.

Call Adjustment : See the side of monitor and find Call Vol. consisting of 3 level(High/Mid/Mute).

Receiver Adjustment : While communicating, adjust R. Vol. consisting of 3 level(High/Mid/Low).

On Monitoring(or talking), push [Menu] and the brightness icon will appear.At this point, adjust the brightness with the keys, UP / DOWN / ENTER.

●

●

Press Open Door button under Standby Condition for two seconds or longer and "MELODY MUTE ON" will appear on the screen. If it has been set, you will not hear any sound when there is a call from Porch, Lobby or Guards. Repeat the Setup method to cancel. Then, "MELODY MUTE ON" will appear on the screen.

■ Communication with door camera

■ Camera monitoring

■ Door open

■ Sound Adjustment

■ Brightness Adjustment

■ Call Sound (MELODY) MUTE Function

Instructions for operation

Push the call button.The camera melody isturned on.

You can hear call sound frommonitors, and camera image comes out on screen.(Standby time : 30 sec)

Push the talk/guard button [ ] andcommunicate with the door camera(Communication time : 3 minutes)

Push the talk/guard button [ ] again and stop the communication.

Hello

Press the talk button [ ] whilemonitoring and start to communicatewith the calling camera.

Push the monitor button [ ] whenthere is no image on monitor screen.

Push the monitor button [ ]again and stop the communication.

Hello

Push the monitor button [ ] 2 time and the image of camera2 appears.

Camera image appears on screen.(Monitoring time : 1 minute)

Hello

10

■ If there is a call from Lobby/Guard

■ Call Guard Master on System mode set

Instructions for operation

Specification

When interworking Lobby/Guard, set up in the menu.( [MENU] → [5.System Set] → [4.Cam Set] → [2.Cam1 Select] or [3.Cam2 Select] : System)This fuction is for Guard Master, KLP-C420, KVS-A4p or KVS-A8P.

This function is for Guard Master. KLP-C420, KVS-A4P or KVS-A8P.

※If you see the recorded video image call from the lobby.

※Do not you see the recorded video image call from guard.

Hello

Lobby Phone or Guard Phone to call ahousehold.

Re calling sound

Monitor gives a calling sound and the visitor is shown on the screen.Guard Phone has no screen and there will be call sound only(Call standby : 30 seconds)

*OSD : CAM1 or CAM2 Display

While calling, press the door open button [ ] to open the common porch and in five seconds, the call will automatically stop.(★Door Opening is available only when using a lobby phone.)

Press the talk/guard button [ ] to call. While calling, press the talk/guard button [ ] to end. (Call time: 3 minutes)

While Guard Talk on.Push the talk/guard button [ ] and Guard Talk finishes.

On Standby, push the talk/guard button [ ]

When the guard picks up.the talk starts.(Communication time : 3 minutes)

*OSD : CAM1 or CAM2 Display

·SD CARD Maximum Available Capacity : 32GB(SDHC) SAND DISK - MLC Method, CLASS-4 KING MAX - MLC Method, CLASS-6 Bareun Electronics - MLC Method, CLASS-5

·Video Image Storage Resolution → NTSC : 704 X 480 / PAL : 704 X 480 / FORMAT : MPEG-4·Image Storage Resolution → 704 X 480 / JPEG FORMAT·DIGITAL FRAME FILE SIZE → Max. Resolution : 2048 X 1536 Pixel, MAX. file size is below 2 MB. Note : Only is the file satisfied with Digital Frame size available.·Playback the video image stored in SD CARD from PC. PLAYER : KOCOM PC VIEWER, GOM PLAYER, KMPLAYER·KOCOM PC VIEWER Download : www.kocom.com (EX : Search : KCV-A374SD)

Be careful when use other SD Cards except listed above since they may cause error.

※Highly recommend to use the original SD card packed together with the product.

11

■ Absence Setup and Recording the image of a door camera

■ Porch motion recording by motion setup

■ General reccording

■ Notice for recording

■ System Time Setup

■ Digital Frame

Instructions for operation

Set up Absence in the menu. When a visitor calls at the porch, porch images will be automatically recorded.(Refer to the Menu to set up your leave.)(LED: Red flickers)

If you set up Motion Recording in the menu, when there are motions while monitored, automatic motion recording will begin. If you set up Motion Recording, only for CAM2, automatic motion recording will start when there are motions in standby conditions.(If CAM2 is set up as GUARD, you cannot record motions in CAM2. Motion recording time: 20 seconds)(As Electronic Album is set up, motion recording will be automatically turned off.)(In Menu, appropriately set up motion and motion sensitivity.)

Absense Set : Menu >> 1. Absens Set

Motion Set : Menu >> 3. Rec Set >> 3. Motion set

Recorded files will be saved only in SD CARD. Therefore, if there is no SD CARD, there will be norecording.All recording excluding motion recording will be saved according to Menu REC SET>>SAVE MODE SET:CAMERA(Still Images) and MOVIE(Moving Images) files.Still images are saved in Image Folder in SD CARD and moving images will be saved in VIDEO Folder.

When there is any porch image, if you press[MENU] , images may be recorded manually.If you press [MENU] while recording, recording will be finished.

Set up system time: Menu>>SYSTEM SET>>TIME SET.Time display when recording shall be done with system time which is initialized when released from the plant. It is necessary to reset when using it for the first time.(★ Reset product time regularly as errors occur according to environment of use.)

Digital Frame Set : Menu >> 4. Digital Frame

This is to show JPG files in SD CARD consecutively on the screen. In Menu, set up Digital Frame and it willwork in standby positions according to the setup.It will work as long as set up in Menu and automatically stop.If the porch sends a call while Electronic Album works, electronic album motions will stop. It will work againas standby conditions occur again.(★ As motion record setup is decided, electronic album function will be automatically turned off.)

12

MENU Setting

1. Absense Set - Absence setup. If you set up, porch / lobby call images will be automatically saved. (As Absence is set up, LED will flicker in red.) (Setup : [MENU] Key>>1. Select Absense Set >>[ENTER] Key>> Select YES >>[ENTER] Key)

2. Play Folder - Play or delete saved moving images, still images, or file albums. - Play Folder>>In PLAY SELECT, you can select: 1.VIDEO, 2.IMAGE, 3.ALBUM. ① VDIEO : Play or delete a file saved as a moving image. ② IMAGE : Play or delete a file saved as a still image. ③ ALBUM : Preview or delete an album file. - VIDEO Folder : You can play or delete a file saved as a moving image. (How to Play or Delete : [MENU] Key>>2. Select Play Folder >>[ENTER] Key >>1. Select VIDEO >> Select File >>[ENTER] Key>>Select Play or Delete>>[ENTER] Key) - IMAGE Folder : You can play or delete a file saved as a still image. (How to Play or Delete : [MENU] Key>>2. Select Play Folder >>[ENTER] Key >>2. Select IMAGE >> Select File >>[ENTER] Key>>Select Play or Delete>>[ENTER] Key) - ALBUM Folder : You can play or delete an electronic album file saved in SD. (How to Play or Delete : [MENU] Key>>2. Select Play Folder >>[ENTER] Key>>3. Select ALBUM >>Select File >>[ENTER] Key>>Select Play or Delete>>[ENTER] Key)

3. Rec Set - Record Setup. ①Save Mode Set, ②Rec Time, ③Motion Set, ④Set up OverWrite.

①Save Mode Set : Set up automatic recording when leaving and method of recording when recording on general occasions. ·Camera(Still images), Movie(Moving images) ②Rec Time : Set up automatic recording time when you are outside. ·30sec / 2min / 5min ③Motion Set : Set up motion recording. ·OFF - Motion record setup OFF , ON - Motion record setup ON ·Motion sensitivity [1~10] ④OverWrite : Set up overwriting.

4. Digital Frame - Set up an electronic album. - OFF : Electronic album off , ON : Electronic album on, FIX - Fix Chapter 1. (★ ON : Play the files in ALBUM Folder consecutively and sequentially.) (★ FIX : When it is FIX, you will be directed to Play Album File, Select Screen as follows.) - 30MIN / 1HOUR - Electronic album working time

5. System Set - Set up in relation to system setup. ① Time Set : Set up system time. ② Melody Set : Set up CAM1,2 call melodies. ③ Monitoring Time Set : Set up time for camera monitoring. (CAM1 :1M(1 minute)/3M(3 minutes)/5M(5 minutes) , CAM2:3M(3 minutes)/30M(30 minutes)/1H(1 hour) ④ Cam Set ·CAM Adjust : Set up Contrast[0~100] and Color[0~100] of porch images. ·CAM1 Select : MC30/MC24/MC20/C60/SYSTEM ·CAM2 Select : MC30/MC24/MC20/C60/SYSTEM ★ Set up the porch camera at CAM1,2. ★ When you use Guard Phone or Lobby Phone, set up SYSTEM One. ⑤ SD Card ·Total : Total capacity of SD CARD ·Free : Remaining capacity of SD CARD ·SD CARD Format? : Format SD CARD. ⑥ System Info ·System Info : Refer to system information ·F/W upgrade : You can upgrade the system software. ※Software upgrade - Copy Firmware, Root Dir., SD CARD. - In the above menu, select F/W upgrade and press [ENTER]. - Select YES and the software will be automatically upgraded. ★ Notice : If you turn off the power or take out SD Card, it may damage the product. Therefore, wit until automatic rebooting after an update. ⑦ Language Set : Set up Language. (Language : English / Russian/Espanol/French) ⑧ Default Set : This is to initialize product setup to the conditions of release from plant.

13

MEMO

Warranty

Warranty Card

To receive after service, have the following ready before you contact our branches.

KOCOM Warranties the original purchaser of this product as follows.

PRODUCT

MODEL

DATE PURCHASED

WARRANTY PERIOD

AGENCY ADDRESS

SINCE 1976

1. Name of the product.2. Model number of the product.3. The area of problem.4. Phone number and address at which you can be contacted.

1) This product is produced under strict quality control and inspection procedures. 2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year from date of purchase free of charge. 3) The following cases will be subject to charge, even during warranty period: a. Breakdown during transport, or through careless treatment, by consumer. b. Breakdown cause by unauthorized repair, or system modification. c. Breakdown caused by natural disaster or power disorder.

This manual is based on the date as shown in the right and specifications are subject to change without notice for quality improvementwww.kocom.com E-mail : export@kocom.co.kr

KCV-434SD / D434SD

P0323