scs directory accreditation number: scs 0145 directory accreditation number: scs 0145 01.06.2018 / e...

Federal Department of Economic Affairs,

Education and Research EAER

State Secretariat for Economic Affairs SECO

Swiss Accreditation Service SAS

SCS Directory Accreditation number: SCS 0145

01.06.2018 / E wan/zej 0145scsvz_englisch 1/4

The given extended measurement uncertainty is the standard uncertainty of the measurement multiplied by an extension factor k = 2,

which corresponds to a confidence level of about 95% for a normal distribution.

International standard: ISO/IEC 17025:2005

Swiss standard: SN EN ISO/IEC 17025:2005

Metrology.ch SA Rue de Pont 25 2300 La Chaux-de-Fonds

Head: Guillaume Tremblay

Responsible for MS: Dominique Dandeleux

Telephone: +41 32 968 80 60

E-Mail: mailto: [email protected]

Internet: http://www.metrology.ch

Initial accreditation: 09.05.2016

Current accreditation: 09.05.2016 to 08.05.2021

Scope of accreditation see: www.sas.admin.ch (Accredited bodies)

Scope of accreditation as of 01.06.2018

Calibration laboratory for length, torque and weight

Calibration and Measurement Capability (CMC)

Measured Quantity / Instrument or Gauge

Measurement Range

Measurement Conditions

Best Measurement Uncertainty ± 1)

Remarks

LENGTH

Plug gauge

- Steel and carbide Ø 0,05 … 10 mm Diameter 0,25 µm + 1,7.10-6.L Horizontal measur-ing bench

- Steel and carbide Up to Ø 250 mm Diameter 0,5 µm + 5.10-6.L

Screw plug gauge

- NIHS Ø 0,3 … 1,4 mm (0,08…0,25 mm)

Simple pitch diameter

1,9 µm Horizontal measur-ing bench

- St eel and car-bide

Ø 1 … 250 mm (0,25…2,5 mm)

1,7 µm + 3.10-6.L

mailto:[email protected]

http://www.metrology.ch/










Measurement Range



Remarks

Radiated gauge / Spherical gauge

- Carbide Ø 0,1 … 5 mm Diameter 0,4 µm Horizontal measur-ing bench

Cylindrical ring gage

- Steel Ø 1 … 180 mm Diameter 0,6 µm + 4.10-6.L Horizontal measur-ing bench

Up to Ø 400 mm Diameter 0,9 µm + 4,5.10-6.L

Probe indicator Scale interval

- Dial Up to 100 mm 0,001 mm 1,1 µm Horizontal measur-ing bench

0,010 mm 1,6 µm

- Digital display Up to 100 mm 0,001 mm 1,6 µm Horizontal measur-ing bench

0,010 mm 1,7 µm

Test indicator Scale interval

- Dial Up to 4 mm 0,001 mm 0,8 µm Horizontal measur-ing bench

0,002 mm 0,8 µm

0,010 mm 2,5 µm

- Digital display Up to 4 mm 0,001 mm 0,8 µm Horizontal measur-ing bench

0,010 mm 2,5 µm

External microme-ter Standard / Special Scale interval

- Vernier scale Up to 300 mm 0,001 mm 1,3 µm + 23.10-6.L

0,002 mm 2,0 µm + 22.10-6.L

0,005 mm 3,0 µm + 19.10-6.L

0,010 mm 4,5 µm + 17.10-6.L

- Digital display Up to 300 mm 0,001 mm 2,0 µm + 21.10-6.L










Measurement Range



Remarks

V-anvil micrometer Scale interval

- Vernier scale Up to 50 mm 0,001 mm 3 µm + 7.10-6.L

0,002 mm 3 µm + 7.10-6.L

0,005 mm 4 µm + 5.10-6.L

0,010 mm 5 µm + 4.10-6.L

- Digital display Up to 50 mm 0,001 mm 3 µm + 6.10-6.L

Internal microme-ter Scale interval

- Vernier scale 2 … 150 mm 0,001 mm 4 µm + 13.10-6.L

0,002 mm 4 µm + 13.10-6.L

0,005 mm 4 µm + 13.10-6.L

0,010 mm 4 µm + 13.10-6.L

- Digital display 2 … 150 mm 0,001 mm 4 µm + 13.10-6.L

Caliper Scale interval

- Dial Up to 1000 mm 0,01 mm 6 µm + q + 17.10-6.L q = resolution

0,02 mm 6 µm + q + 17.10-6.L

- Vernier scale Up to 1000 mm 0,02 mm 6 µm + q + 17.10-6.L

0,05 mm 5 µm + q + 10.10-6.L

- Digital display Up to 1000 mm 0,01 mm 5 µm + q + 17.10-6.L

TORQUE

Torque wrenches

- Fixed and with in-dicator

1 … 1500 N.m 0,6 %, but not less than 0,006 N

In the laboratory and on-site










Measurement Range



Remarks

Torque screw-driver

- Fixed and with in-dicator

0,02 … 10 N.m 1,3 %, but not less than 0,006 N

Calibration in the la-boratory or on-site

Weighing instru-ment

Calibration elec-tronic weighing

…15.1 kg

With standard weight E2

1,5.10-6

Calibration in the la-boratory or on-site

…75,1 kg With standard weight E2/F1

5.10-6

* / * / * / * / *

scs directory accreditation number: scs 0145 directory accreditation number: scs 0145 01.06.2018 / e...

Documents