scope of energy saving in textile industry
DESCRIPTION
This presentation was made at a seminar on "Enhancing competitiveness through Energy Efficiency-Focus Textile Industry" held on 16th July, 2010 at Hotel Park Plaza, LudhianaTRANSCRIPT
Scope of Energy saving in textile mills of Punjab
By
J.N.Vohra B.Text, M.Tech, F.I.E., C.Eng (I), L.M.I.M.A.Coordinator-NITMA, Punjab
Types of energy used in the textile industry
Electricity:As power source for machinery, Lighting, Air-Compressing, and Air-Conditioning or Cooling
Fuel:For generating steam in Boilers for heating water, dye fixation, fabric drying, and temperature control systems
Energy Sources in Punjab
Electricity: Hydro-Power, Thermal
Fuel: Coal, Rice Husk, Fuel Oil, Wood
Energy Consumption Pattern in Punjab Textile Mills
Spinning
35%
Weaving
20%
Dyeing
40%
Auxillary
5%
Whereas, power dominates consumption pattern in spinning/weaving, while thermal energy, requiring use of fuel, is major for dyeing & finishing, for heating and drying of the water
used.
Energy Saved = 2 x Energy Produced
Energy efficiency usually refers to
Reduction in the energy usage for a given serviceAvoiding unnecessary consumption of energy
Shares of energy consumption and cost in various textile sectors of Mauritious
(An Example)
Textile Sectors Electrical energy, (KWh/kg)
Total energy cost, $/kg
Spinning 3.60-3.80 0.19-0.20 Weaving 2.00-2.20 0.12-0.13 Dyeing & Finish 1.60-1.70 0.30-0.45Knitting 0.30-0.40 0.02 Clothing Manufacture. 0.80-1.00 0.07-0.12
The wet processing of textiles consumes only a small portion of electrical energy, say around 16% of total electrical energy, mainly for running the
various processing machinery's.
For “rational use of energy”
General management techniques and
Process-specific techniques
General Management Techniques……to improve the efficiency of electricity use
(Small Measures)
Use Electricity-saving fluorescent lamps or economical florescent tubes. Ensure correct shape of the reflective fittingColour of the interior finish of the room should be brightDistance from the light source is important
9
Project Examined Technologies For effective use of steam
Useing appropriate heat insulating materials for steam piping Reduces steam leakages and consumption Using smaller distances for steam transportationUsing pressure reducing valves to regulate the steam pressure at the point of useOptimizing of boiler air/fuel ratio and operating pressureUseing demineralised water in boilers
BEE Sponsored project
Project Examined TechnologiesEnergy Management System
Recovering of cooling water and heat recovery from hot/wasteRecovering of condensateUseing of measuring instruments and automatic controls, Useing of heat exchangers and recovery systems
BEE Sponsored project
Water usage in Textile Industry
Major water uses in the textile industry may include:
washing/rinsing, scouring, dyeing and bleaching.
Values are indicative only and will vary from site to site.
Water saving benefits
There are significant benefits that can be realised through becoming more water efficient. These include reductions in costs in:Wastewater discharge; treatment and disposalReduction in Energy consumption for heating
Savings due to efficient compressed air management in Punjab Mills (NITMA Sponsored Study)
UnitsProject cost
(Rs. Lakhs)
Potential Power Savings in units/day
Potential Power Savings in Units per Annum
Potential carbon emissions in tons/annum
Savings in Rs Lakhs/an
num
1 5.25 750 270000.00 4.50 10.8
2 7.48 1750 630000.00 10.50 25.2
3 8.91 2100 756000.00 12.60 30.24
4 7.55 1750 630000.00 10.50 25.2
5 3.24 400 144000.00 2.40 5.76
6 26.86 7000 2520000.00 42.02 100.8
7 5.25 750 270000.00 4.50 10.8
8 5.25 750 270000.00 4.50 10.8
15250 5490000 91.53 219.6
Net Reduction Scope = 1.2 MW and Rs. 219.6 Lakhs/annum
The Energy use and Technology audit studies- Solapur Textile Cluster” in 51 units
ByZenith Energy Services (P) Limited, Hyderabad
Sponsored by
Bureau of Energy Efficiency (BEE)., New Delhi.600 Total Textile industries 350 units are of integrated 250 units have manual dyeing and 100 units has mechanical dyeing facility
Energy Scenario In Solapur Textile Cluster
Energy cost: 6 to 8% of the total production cost and varies as per the products manufactured.
Main energy forms: electricity and wood.
Energy consumption: 60 to 65% thermal energy & 35 to 40% electrical energy
Total: 16,647 TOE (tons of oil equivalent)
15
Recommended use of the Solar Hot Water System
• The solar energy is a renewable energy source and is available abundantly
• The Solar Hot water system doesn’t require any fuel
• The SHW system uses clean form of energy and doesn’t emit toxic gases and protects environment
• Subsidy from the central government, if loan is not taken from the financial institution, up-to 20% of total cost
16BEE Sponsored project
Installation of Economizer in Boilers
17
• Utilizes heat available in waste flue gases and hence no fuel is required
• Hot water generated can be directly used for the process, hence reduction in processing time
• Low investment and high returns
BEE Sponsored project
Replace the old Boilers with Energy Efficient Boilers
18
BEE Sponsored project
19
Reduces fuel consumption and faster generation of steamReduces GHG emissionsImproves working environment for workers due to reduction in radiation losses and flue gas temperatures
Benefits
Cost Benefit Analysis
Energy Conservation Measures
Monetary Savings (Rs.Lakh)
Simple Payback Period (in years
Total Saving Potential of the
cluster (Rs.Lakh)
Solar Hot Water System
0.60 3.3 90.00
Economizers (for boilers)
0.30 1.7 16.50
Heat recovery from hot drained water
0.50 _ 50.00
Energy Scenario In Surat Textile Clusterin 75 Units
ByZenith Energy Services (P) Limited, Hyderabad
Sponsored by
Bureau of Energy Efficiency (BEE)., New Delhi.
400 Total Textile industries 330 units are of integrated 70 units has dyeing facility
Energy Scenario in Surat Textile Cluster
Energy cost: 12 to 15% of the total production cost and varies as per the products manufactured
Main energy forms: Electricity ,Coal, Natural gas and Biomass .
Energy consumption: 60 to 65% thermal energy & 35 to 40% electrical energyTotal: 12, 89,039 TOE
23
Recommended Steam based cogeneration system
Schematic Diagram Of Proposed Cogeneration Scheme
TUR
BIN
E
~
To Process
POWER
CO-GENERATION
Boiler
High pressureSteam
Low pressure Exhaust Steam
BEE Sponsored project
24
Cost benefit analysisCapacity of the co-generation plant = 500 kWNo. of units generated/hr = 400 kWhSteam generation = 5500 kgCoal consumption = 760 kgCoal cost (Rs.3.50/kg) = Rs.2660Total fuel cost = Rs.2660Monetary savings/hr = Rs. (4910 – 2660)
= Rs.2250Monetary/annum = Rs.78.70 LakhCapital invested for co-generation plant = Rs.350.00 LakhSimple payback period = 4.4 years
BEE Sponsored project
25
Recommended to Generate hot water from hot drained water (heat exchangers) of Jet Machines
BEE Sponsored project
26
Cost benefit analysisDays of operation per annum 350 DaysQuantity of hot water drained 85,000 liters/dayAverage quantity per day for conservative purpose (80%) 68,000 liters/dayTemperature of hot drain water 90o CQuantity of heat can be recovered 27,20,000 kcal/dayBoiler efficiency 51%Calorific value of fuel 5800 kcal/kgFuel savings 292 tons/annumFuel cost Rs. 3,500 per ton
Savings per annum Rs. 10.22 LakhInvestment for tank, heat exchanger and distribution system Rs.6.00 LakhPayback period 6 Months
BEE Sponsored project
There is Scope of Energy Saving in Dyeing & Finishing Operation in Textile Mills of Punjab
Thank You
Save energy, save environment for future generation