scm1 general purpose rotating probe - 16 pin dip ......16 pin dip socket rotator samples prepared on...
TRANSCRIPT
The general purpose rotating probe can be configured to have a either 16 pin dip header sample holder or cylindrical sample holder. The design and principle of this very low friction rotator can be found in Rev. Sci. Instrum. 70, 237 (1999).
Kevlar String Rotator Shaft
Spring
Linear Feed Thru
Remotely Controlled Stepper Motor
Universal JointRotator Frame
Rotator
Pulleys
Rotation Axis Spring Fix
Stainless Steel Mini-Coax
Cylindrical socket rotator
16 Pin Dip socket rotator
SCM1 General Purpose Rotating Probe - 16 Pin Dip / Cylindrical Socket Mount
1/4For more information contact Ju-Hyun Park ([email protected])
Probe Body (not scaled)
(magnetic field)
0.8 inch
0.4 inch
16 Pin dip socket rotator
Samples prepared on a standard16 pin dip header can be mounted to the 16 pin dip socket rotator and can be remotely rotated to a desired orientation during experiment. See page 3/4 for proper dip header dimension and shape.
Field
SCM1 General Purpose Rotating Probe - 16 Pin Dip Socket Mount
2/4For more information contact Ju-Hyun Park ([email protected])
twisted pair
twisted pair
0.1 inch between adjacent pins
0.3 inch between opposite pins
pin diameter 0.02 inch
overall length 0.8 inch
overall width 0.4 inch
ALL corners need to be rounded off
Acceptable Sample Dip Header Dimension
Various style of Dip header can be used as a sample holder as long as it meets the acceptable dimension above.
SCM1 General Purpose Rotating Probe - Sample Dip Header Dimension
3/4For more information contact Ju-Hyun Park ([email protected])
A cylindrical socket rotator is designed to hold a cylindrical sample holder that would be designed by the user. Currently the SCM1 probe has two cylindrical rotators with diameters of 0.45 inch and 0.5 inch. The dimension of a sample holder should fit 24.5 mm I.D. cylinder during rotation.
Field
0.45 inch I.D. 0.5 inch I.D.
Cylindrical sample holder
Cylindrical socket rotator
Rotation Axis
Set screw to hold the sample holder
SCM1 General Purpose Rotating Probe - Cylindrical Socket Mount
4/4For more information contact Ju-Hyun Park ([email protected])