scientific plastics company, inc.scientificplastics.com/index_htm_files/sp_master_catalog.pdf ·...

Scientific Plastics Company, Inc.Serving the laboratory industry for over 50 years.

Trays & Liners

Stocked in may standard sizes and may also be manufactured to meet your specific needs.

Tanks

Acid Neutralization & Dilution

One piece, seamless rotomolded design

Sizes of 1 to 2,400 gallon

Traps &

Tailpiecs

Bottle TrapsPtraps

Anti-Siphon TrapsRunning Traps

Accessories

Floor DrainsSink Overflows

StandpipesSink Mounting Rims

Basket StrainersVariety of other

Pipe & Fittings

Proven “Handtite” Mechanical Joint Design.Wide Variety of Fittings

Meets ASTM F1412

Faucets

Polypropylene or PVDFDeck or Wall MountRegulation Options

Sinks

Single BowlDouble Bowl

Variety of Cupsink StylesSpecial Colors Available

Call, click or fax for additional information

Scientific Plastics Company, Inc. 1016 Southwest Blvd.Kansas City, KS 66103PHONE: (800) 558-2027

Fax: (800) 548-0448www.scientificplastics.com

Recovery PotsDilution Tanks

Accessories

Neutralization Tanks

Neutralization Tanks Features:

Scientific Plastics Company's Neutralization • LightweightTanks are designed to receive, dilute and • Wide Size Rangeneutralize corrosive and harmful chemical • Custom Sizeswastes before allowing such materials to be • Minimum Maintenancedischarged into the public sewers and the • Maximum Versatilityenvironment. • Special Custom Connections

Available• Fiberglass Reinforced Models

Available

Product Description Number Tankof Lab Size Limestone

Scientific Neutralizing and Dilution Tanks are Stations Gal Lbsrotationally molded from virgin High Density 2 5 50Polyethylene conforming to ASTM D1248 for 4 15 150Polyolefin materials. Tanks can be used for service 8 30 250of 180º F in continuous service, or intermittent use 16 55 500of 212º F. Tops are bolted or fusion welded to the 25 100 1000Engineer's Specification, with all fittings made of 42 150 1700Polyethylene and welded into all penetrations of 65 200 2500tanks. 80 300 3600

110 350 4500150 500 6000

General Information 350 1000 14500700 2400 30000

Neutralization of corrosive, toxic and flammablewastes is necessary to the environment and pipingsystems, even when quantities and concentrations Buried Tank Installationare small. Such wastes can cause physical damageto a building's piping or outside sewer systems and, Tanks must be fully supported on the base byif effluent is being discharged to the environment either an appropriate concrete pad that allows no(such as rivers and lakes), severe damage can result overhang or a compacted stone free sand bed.to wildlife and water sources. When buried, tanks must be filled with water Neutralization is the process whereby acids and prior to backfilling. Tank tops are non-loadalkalis are rendered harmless. The degree of bearing and should have a trap door or accessneutralization can be measured by a system known cover over them supported by foundation or by theas pH (positive Hydronium ions). The degree of ground. They cannot be supported by the top ofmeasurement is a pH number of 7, which is neutral. the tank.Acids range from 0 to 6.99. Alkalis range from 7.01 The backfill material shall be free of stonesto 14. The smaller the number, the higher the and foreign matter and shall be capable of passingcontent of acidic waste. The higher the pH number, a No. 10 screen. The depth of should be 6" to 8"the higher the alkaline waste. thick around the tanks and then normal backfill

materials may be used. Mechanical tamping isnot recommended. For tanks with extensions,

Sizing: Neutralizing & Dilution Tanks the above procedure should be followed up to orslightly above water level and from that point on

Sizing the correct neutralization tank for a project up to ground level it is recommended that a 4"is done by relating the number of stations to be thick concrete sleeve be poured around the tankdischarged through the system. In commercial and in multiple lifts. If this is not feasible than theindustrial laboratories the number of lab stations in normal backfill procedure may be used, up to 36"the table below should be divided by two. Use the height above water level, bearing in mind thatfollowing table as a guide. backfilling will produce inward pressure on the

empty portion of the tank. Care must be exercised chips into acid neutralization basins, tanks, orduring this operation to prevent inward buckling. sumps. Water is added to the tanks to initiate A concrete vault must be used or a 4" thick the dilution process. We recommend theconcrete sleeve poured around the tank in multiple limestone chips be one to three inches inlifts in areas with high water tables or poor soil diameter size range and have a calcium carbonateconditions. If the tank is to be used as a pump-out content in excess of 90%. See chart on priorholding tank or similar type of operation or the tank page for approximate limestone needed.will be left empty or partially full, then a vault isrequired. We recommend that tanks 100 gallons andlarger that are going to be buried, should be Maintenance of Tanksfiberglass wrapped.

Proper maintenance of neutralization tanks isessential for proper neutralization of wastes in the

Limestone Usage systems. Tanks must be cleaned our periodicallyof all sludge, debris and other material and must

Limestone chips are being used in numerous be checked for proper amount of limestone. Aapplications to help neutralize chemical bearing regular maintenance schedule of one to three monthswastes (e.g. acid wastes). After years of successful should be observed, but more or less frequentneutralization, many states and local environmental inspection may be necessary in any particularplumbing codes call for the addition of limestone case.

Tank TypesOptional Vent Clean Out Plug

Weld Cover

Inlet Outlet

Welded Cover Tanks 5 Gallon Holding TanksWelded Cover tanks are manufactured in 15 gallon to 2400 These molded tanks are designed for use in applications thatgallon sizes. These tanks are complete with welded circular require a five gallon holding tank at the point of use. The tanktops. The 15 and 30 gallon tanks have a 6: clean out installed can serve as a neutralization tank when used with limestonein the top of the tank for access. Tanks above 55 gallons chips, and without limestone will serve as dilution tank. Thehave a 17" bolted manhole installed for access. 6" clean out installed in the center top of the tank provides

easy access.

Optional F.I.P Vent Bolted Cover

Inlet Outlet

Inlet Outlet

3" clean out available

in front locationBolted Cover Rectangular Tanks/TrapsBolted cover tanks are manufactured in 2 gallon to 2400 Rectangular tanks are designed for use at point of use. Thesegallon sizes. These tanks are cylindrical shaped with bolted tanks have a 1 and 1/4 gallon capacity. Without limestonecircular top. This is removable for access to the tank. these tanks serve as a dilution tank or sink trap. They can

also be used with limestone for neutralization. A 3" cleanout cap can be installed in the side of the tank or on top toprovide best access.

Optional Vent Welded Cover

Inlet Outlet

12"

or

18"

6"

12" or 14"

Fiberglass Reinforced Tanks Flat Book Shelf TanksFRP wrapped tanks are manufactured in all sizes. These One piece rotationally molded bookshelf tank. Great fortanks are fiberglass reinforced for additional strength. confined spaces. The tank is available in 3 and 5 gallonTypically, FRP have the same access as welded cover tanks capacity, 1-1/2" or 2" Male, Female or Plain End Fitting.with bolted tops available. This tank is equipped with a 3" top clean out cap for safe

and easy maintenance and cleaning.

Cylindrical Tanks Standard Tank Dimensional GuideBolted Cover Vent

B D

Outlet

inlet Inlet Outlet

A C

E Side Vent

Standard Heights Standard Locations

Gallons Inlet/Outlet Vent A-Height B-Diameter C-Inlet/Outlet D-Vent E-Inlet to btm Weight2 1.5" 1.5" 9" 9" 6.5" 2" 2" 3-3/4"5 2" 2" 16-1/4" 11" 12" 3" 3" 9

7.5 2" 1.5" 16.5" 12-1/4" 13.5" 3" 3" 1015 3" 2" 25" 14-1/4" 21.5" 3" 3" 14.515 3" 2" 15.5" 17-1/4" 10" 3" 3" 1220 3" 2" 24" 16.5" 21" 2.5" 3" 1630 3" 2" 30.5" 17.5" 25" 3" 3" 1840 3" 2" 25.5" 22.5" 21" 3" 3" 3055 3" 2" 33.5" 22.5" 27" 3" 3" 37

100 4" 3" 49" 24" 42" 3" 3" 50150 4" 3" 48" 30" 40" 3" 3" 70180 4" 3" 42" 36" 34" 3" 3" 75200 4" 3" 53" 36" 45" 3" 3" 86275 4" 3" 48" 42" 40" 3" 4" 100360 4" 3" 48" 48" 40" 3" 3" 172

Special Application Tanks5S A 2" 2" 16.5" 12-1/4" 13" 3" 3" 10

10S A 3" 2" 15.5" 17-1/4" 10" 3" 3" 1215S A 3" 2" 24" 16-1/4" 17.5" 3" 3" 1620S A 3" 2" 30.5" 17-1/4" 23.5" 3" 3" 1830S A 3" 2" 25.5" 22.5" 20" 3" 3" 3040S A 3" 2" 33.5" 22.5" 25" 3" 3" 3755S A 3" 2" 36" 24" 30" 3" 3" 42100S A 3" 2" 48" 31" 38" 3" 3" 55150S A 4" 3" 53" 36" 38" 3" 3" 75200S A 4" 3" 48" 42" 38" 3" 3" 90

*All tanks furnished with Male, Female or Plain End Fittings. All other additional fittings from price sheet.**Allow additional 5" for flange clearance on diameter of tank. All weight listed above is in pounds. All tanks above supplied with above sized inlets, outlets and vents. Tanks may be ordered with other variations on inlets, outlets and vents, as well as, different locations and elevations of openings. For additional openings or variations of fitting sizes, contact your Scientific Plastics representatives for pricing.

1. All tanks are free standing and self supporting.2. Tanks often ship dimensional weight. Contact freight carrier for details on dimensional weight.3. Larger tank sizes by special order.4. Special application tank capacity measured from below the outlet.

Dilution Tank or Trap

Rectangular Inlet and outlet sizes W32501-150 available in 1.5" and 2".

Side View Front View

Top View Inlet Outlet

Inlet Outlet

9" Inlet 8-1/2"

8-1/2"

12-1/2" Capacity Inlet-Outlet Inside Dimensions1.5 gal. 1-1/2" 10" x 9" x 6"

NOTE: Specify Inlet and Outlet size at the time of 1.5 gal. 2" 10" x 9" x 6" order.

Holding Tanks W32506-150 (5 Gallon)W32507-150 (4 Gallon)

Top Inlet Vent

Optional 5 1/2"

Vent

Inlet Outlet

9" 9" 12"

6" Cleanout

15" Dia. (W32506-150)

12" Dia. (W32507-150)

Type Size SizeInlet 1 1/2" or 2"*Outlet 1 1/2" or 2"*Vent 1 1/2"

Recommended Specifications Contractor shall furnish and install high Tank shall be Scientific Plastics style __________density polyethylene neutralization tank. Tank with _________ gallon capacity having _________shall be rotationally molded, seamless inch FIP vent connections. Tank shall be _______construction with flanged top and bolted-down inches in diameter (I.D.) and _________ inches incover, or welded cover with manhole, as overall height. Tank must be installed inmanufactured by Scientific Plastics conforming accordance with manufacture's recommendations.to ASTM D1248.

Tank Accessories

C

D Trap Door• Angle Steel Frame• 1/4" Diamond Pattern• Steel Plate• Flush Mounting• One Inch Finger Hole• Three Standard Sizes• Larger Sizes Custom Made• For Light Traffic Areas

AB

1 1/4"

Dimensions (inches)Model A B C D Wgt lbs.

OR - 24 24 26 1/4 24 26 1/4 32OR - 36 36 38 1/4 36 38 1/4 57OR - 48 48 50 1/4 48 50 1/4 88

*Add tank flange dimension for approximately 5" when sizingtrap door. To determine actual opening through frame, subtract2" from dimensions A & C.

Tank Extensions

Tank Extensions Top of Cover Any cylindrical style tank can beextended from the same polyethylenematerial. Both full size and smallerextensions are available. Your ScientificPlastics representative can size thenecessary extension.

Vent Inlet Outlet Height

Dimension Dimension Dimension

Diameter

Tanks with extensions, that are Extension going to be buried, should be Diameter Top Cover placed in a vault or pipe sleeve. Tank covers are non-load bearing.

Vent Inlet Outlet Height

DimensionDimension Dimension

Diameter

DILUTION TANK

D

ADJUSTABLE RISER

E A

1-1/2 NPT

B

C

RECOVERY DILUTION TANKVisual Base (Translucent)

Plaster or sedimentation type. New patented antisyphon action. All units 1-1/2" National Pipe Thread.

SYMBOL CAPACITY A B C D EMIN MAX

W31586-151 1 Gal 11 3/4" 9" 7.50" 2.88" 2.5" 7.5"W31586-152 2 Gal 17.00" 14.25" 7.50" 2.88" 3.5" 13.5"W31586-153 5 Gal* 19.50" 17.00" 11.50" 2.88" 3.5" 13.5" *SLIGHTLY DIFFERENT BOTTLE SHAPE

DILUTION TANK

Vent Optional

X1 X

B2 B1 A

B

D G

K E

A3 L

UNDERCOUNTER DILUTION/NEUTRALIZATION TANKS

Unit designed for easy access to clean and recharge. May also be used as plaster orsedimentation recovery unit. Red screw cap signals unit as part of acid waste systemand allows for easy cleaning.

SYMBOL CAPACITY A A1 A2 A3 B B1 B2 D E G L K X X1 USABLE WT.CAPACITY

(US Gal.) MPT MPT (US GAL.) (LBS.)W32505-150 6 12 8 5.5 11 18.5 17.75 16 13.5 2 12.5 16 1/4" 1.5 1.5 4.3 8W32505-200 6 12 8 5.5 11 18.5 17.75 16 13.5 2 12.5 16 1/4" 2 2 4.25 8

Use replacement neutralization chips part number W32599-050 (50#)Installation kit (sink) W38525-150

BOOKSHELF TANKSNeutralization or Dilution for limited space

A

B

12"or18" C

6"

12" or 14"

6" • One Piece Rotationally Molded • 1-1/2" or 2" Male/Female or

Plain End Inlet and Outlet • 3" Top Cleanout Cap

A B C D= GAL PART NUMBER

6" 12" 12" 3 W121206-001

6" 18" 14" 5 W181406-001

INSTALLATION KIT

INSTALLATION KIT FOR UNDERCOUNTER DILUTION/NEUTRALIZATION TANKSW32510-150 - KIT W38525-151W32505-150 - KIT W38525-150

USE REPLACEMENT NEUTRALIZATION CHIPS PART NUMBER P32599-050 (50#)

DILUTION TANK(PLASTER OR SEDIMENTATION TRAP)

B C H

J G

D

D I F

A E

1-1/2 Gallon Dilution Tank is designed for dilution or to trap solids for recovery ordisposal. Its squat design makes it ideal where bench height is limited. Can beused for single sink or series of sinks. Comes with 2" outlet and adapter to 1-1/2",plus cleanout cap. Available in black and translucent white (White is part #59156,please specify with order). NOTE: Can be used for effluent sampling.

SYMBOL A B C D E F G H I J INLET # OF INLETS OUTLETW59155-200 7.31" 2.50" 1.19" 2.06" 9.00" 10.16" 1.91" 0" TO 10" 6.78" 1-1/2" 2 2"W59155-201 7.31" 2.50" 1.19" 2.06" 9.00" 10.16" 1.91" 0" TO 10" 6.78" 1.64" 1-1/2" 1 2"W59155-202 7.31" 2.50" 1.19" 2.06" 9.00" 10.16" 1.91" 0" TO 10" 6.78" 1.64" 2 1 2"W59155-203 7.31" 2.50" 1.19" 2.06" 9.00" 10.16" 1.91" 0" TO 10" 6.78" 1.64" 2 2 2"

Tank Data Sheet - Must accompany all tank orders

Cylindrical TankStyle Tanks P.O. No.BOLTED # of TanksCOVER Tank Size

A B C D E

Cover Bolted

to Tank Vent

B D

Inlet O Outlet

A

C

E

Connections

Type Size

Inlet Job Name

Outlet Date

Vent Top Side


Cylindrical TankStyle Tanks P.O. No.WELDED # of TanksCOVER Tank Size

A B C D E

Cover Welded

to Tank Vent

B D

Inlet Outlet

A

C

E

Connections

Type Size

Inlet Job Name

Outlet Date

Vent Top Side


Cylindrical TankStyle Tanks P.O. No. Welded Cover

FRP # of Tanks Bolted CoverWRAPPED Tank Size

A B C D E

Cover Weldedto Tank Vent

D

B

Inlet Outlet

A

C

E

Connections

Type Size

Inlet Job Name

Outlet Date

Vent Top Side


Rectangular TankStyle Tanks P.O. No.

# of Tanks Tank Size

Inlets and outlets are with 1 1/2"&2" pleasespecify upon order

Inlet Outlet

9" 10 1/2"

3" cleanout

8-1/2"

12 1/2"

Connections

Type Size Job Name

Inlet Date

Outlet


Cylindrical 5 TankGallon P.O. No. Please Specify Inlet Outlet Locations

Holding # of TanksTanks Tank Size

Top view of tank

4 1/2

Top Inlet Optional Vent 5 1/2"

Vent Outlet

Inlet

6" Cleanout 15" Dia. (W32506-150) 5 gallon 12" Dia. (W32507-150) 4 gallon

Connections

Type Size

Inlet Job Name

Outlet Date

Vent Top Side


Cylindrical TankTanks P.O. No.with # of Tanks

Manway Tank SizeExtension

Inlet outlet Location chartExtension

Diameter Top of Cover

Diameter

Inlet Vent Height Outlet


Diameter

Bolted and gasketed coverWelded cover with 17" diameter manwayFiberglass wrapped polyethylene tank

Connections

Type Size

Inlet Job Name

Outlet Date

Vent Top Side


Cylindrical TankTanks P.O. No.with # of TanksFull Tank Size

Extension

Please Specify Inlet Outlet LocationTop Of Cover

Diameter

Inlet Vent Height Outlet


Diameter

Bolted and gasketed coverWelded cover with 17" diameter manwayFiberglass wrapped polyethylene tank

Connections

Type Size

Inlet Job Name

Outlet Date

Vent Top Side

Please contact your

Scientific Plastics Representative

For more Information about:

pH Controls

Oval Cup Sinks

Accessories

Double Bowl Countertop

Single Bowl Countertop

Straight Wall Sinks

Round Cup Sinks

Double Bowl Countertop Round Wall Sinks optional colors available Top Size Drain

Part. No. Standard Length Width Depth Length Width Location Part. No. DescriptionW31063-000 Black 18 15 10 49 30 Corner W39021-150 4" round, black, straight wall design, 1-1/2" thread

W39021-151 4" round, white, straight wall design, 1-1/2" threadDouble Bowl W39022-150 6" round, black, straight wall design, 1-1/2" thread

Bowl Size Top Size Drain W39022-151 6" round, white, straight wall design, 1-1/2" threadPart. No. Standard Length Width Depth Length Width Location W39023-000 8" hemi, black, straight wall design

W31220-000 Black 12 12 8 30-1/4 14 1/2 Corner W39034-150 4" wall mount, vertical, blackW31263-000 Black 18 15 12 41-1/4 17 1/2 Corner W39034-151 4" wall mount, vertical, whiteW31264-000 Black 18 15 10 41-1/4 17 1/2 Corner W39050-150 12" round, straight wall design

FLUSH MOUNTING RIM FOR DOUBLE BOWL SINK W31035-150 6" wall mount, vertical, black UNDERCOUNTER RIM FOR DOUBLE BOWL SINK W31035-151 6" wall mount, vertical, whiteSingle Bowl Countertop

Top Size DrainPart. No. Standard Length Width Depth Length Width Location Oval Cup Sinks optional colors available

W31081-000 Black 24 18-1/2 13 55-1/2 28 CenterW31415-000 Black 11 11 7 13-1/2 13 1/2 Center Part. No. DescriptionW31418-000 Black 12 8 8 14-1/4 10 1/2 Center W39024-150 3"x9", 1-1/2" thread, blackW31420-000 Black 12 12 8 14-1/2 14 1/2 Corner W39026-150 3"x6", 1-1/2" thread, wall mount, verticalW31424-000 Black 13 1/2 15 1/2 5 1/2 16-1/2 7 1/4 Center W39027-150 3"x6", 1-1/2" thread, wall mount, horizontalW31424-400 Screen for P31424-000 Corner W39030-150 3"x6", 1-1/2" thread, deep oval, blackW31431-000 Black 14 10"x6" 16-1/2 12 1/2 Corner W39040-150 3"x6", 1-1/2" thread, deep oval, black, wide lipW31440-000 Black 16 6"x6" 18 8 Center W39060-151 3"x6", 1-1/2" thread, low profile, blackW31449-000 Black 16 6"x6" 18-1/2 8 1/2 Center W39036-451 4" rd, white, Horizontal with spigotW31452-000 Black 16 8"x7" 18-1/2 10 1/2 End F164L137-150 3"x6", 1-1/2" thread, low profile, w/pipe ext., blackW31453-000 Black 16 16"x5-1/2" 18-1/2 18 1/2 Corner*W31454-000 Black 16 16"x8" 18-1/2 18 1/2 CornerW31455-000 Black 17 17"x12" 19-1/2 19 1/2 Corner AccessoriesW31456-000 Black 16 13"x16" 15-1/2 15 1/2 CornerW31457-000 Black 18 12"x8" 14-3/4 14 3/4 Corner Part. No. DescriptionW31458-000 Black 18 12"x5-1/2" 20-3/4 14 3/4 Corner* W31414-150 Cupsink Holder and NutW31461-000 Black 18 14"x10-1/2" 20-1/2 16 1/2 Corner W31596-150 Strainer, 1-1/2"W31462-000 Black 18 15"x8" 20-1/2 17 1/2 Corner W31596-200 Strainer, 2"W31463-000 Black 18 15"x12" 20-1/2 17 1/2 Corner W31597-150 Plug, 1-1/2"W31464-000 Black 18 15"x10" 20-1/2 17 1/2 Corner W31597-200 Plug, 2"W31465-000 Black 18 15"x5-1/2" 20-1/2 17 1/2 Corner*W31466-000 Black 18 15"x12" 20-1/2 17 1/2 CenterW31470-000 Black 21 18"x10" 23-1/2 20 1/2 CornerW31473-000 Black 21 18"x12" 23-1/2 20 1/2 Center SpecialW31478-000 Black 23 17"x11-1/2" 25-1/2 19 1/2 Center Part. No. DescriptionW31479-000 Black 23 18"x12" 25-1/2 20 1/2 Corner W31477-000 Black , 23x17x8, 25-1/2x10-1/2, Center SideW31480-000 Black 24 16"x8" 26-1/2 18 1/2 Corner W31085-000 Free standing sink unit/Parts WasherW31481-000 Black 24 20"x10" 26-1/2 22 1/2 CenterW31483-000 Black 24 20"x12" 26-1/2 22 1/2 CenterW31484-000 Black 24 24"x24" 26-1/2 26 1/2 CenterW31485-000 Black 25 15"x10" 27-1/2 17 1/2 Corner Custom sizes and colors availableW31490-000 Black 28 20"x9" 30-1/2 22 1/2 Corner *ADA sinkW31491-000 Black 28 20"x12" 30-1/2 22 1/2 CornerW31492-000 Black 31 17"x10" 33-1/2 19 1/2 CornerW31493-000 Black 30 18"x18" 32-1/2 20 1/2 CormerW31495-000 Black 36 22"x8" 38-1/2 24-1/2 CornerW31496-000 Black 38 23"x8" 40-1/2 25-1/2 Corner

Straight Wall Sinks Drain

Part. No. Standard Length Width Depth LocationWS121208-400 Black 12 12 8 4" Outlet CenterWS161208-000 Black 16 12 8 CornerWS211610-000 Black 27 16 10 CenterWS241517-000 Black 24 15 17 CenterWS240506-000 Black 24 5 16 CenterWS261808-000 Black 25 1/2 17 1/2 8 CenterWS360506-000 Black 36 5 6 CenterWS361624-000 Black 36 16 24 CenterWS421816-000 Black 42 18 16 CenterWS520703-000 Black 52 6 1/2 3 Center

Bowl Size

Bowl Size

Bowl Size

COUNTERTOP UNIT

D A

F

G E B

Raised EdgeAll Round

J

Sink is supported Plywood with 1-1/8" Plywood G

One piece molded sink (with integral molded 1-1/2") countertop unit with pitched ribbed drainboardsand 1-1/8" marine edge. Rear deck allows for mounting water fixtures.

Mounted on 1-1/8" plywood base for easy installation. Polyolefin unit allows for easy cleaning andreduced glassware breakage.

Standard Color Black - Other colors special order.

SYMBOL A B C D E F G JW31081-000 24" 18.5" 13" 55.5" 28" 27.5" 14" 1.375"

CENTER DRAIN SINKS

D

F

E B G

C H

A

This series of polyolefin sinks allow uniform drainage from all locations on thesink. Steel rims available for undercounter mount. Stainless, steel rimsavailable for flush mount. Standard color is non-glare black. Sinks availablein Scientific Plastics' Rainbow of Colors on special order.

SYMBOL A B C D E F G H OUTLETW31415-000 11" 11" 7" 13.5" 13.5" 5.5" 9.75" 9.75" 1.5"W31418-000 12" 8" 8" 14.5" 10.5" 4" 3.5" 11" 1.5"W31424-000 13.75" 4.5" 5.5" 15.375" 6" 2.25" 6.75" 7.1875" 1.5"W31440-000 16" 6" 6" 18" 8" 2.75" 7.75" 8.5" 1.5"W31449-000 16" 6" 6" 18.5" 8.5" 2.75" 7.75" 8.5" 1.5"W31466-000 18" 15" 12" 20.5" 17.5" 7.5" 9" 15" 1.5"W31473-000 21" 18" 12" 23.5" 20.5" 9" 10.5" 15" 1.5"W31478-000 23" 17" 11.5" 25.5" 19.5" 8.75" 11.5" 14"W31481-000 24" 20" 10" 26.5" 22.5" 10" 12" 13" 1.5"W31483-000 24" 20" 12" 26.5" 22.5" 10" 12" 15" 1.5"

CORNER DRAIN SINK D

F

G B E C

H

A

This series of polyolefin sinks allow maximum use of sink interior area becauseof corner drain location. Steel rims available for undercounter mount. Stainlesssteel rims available for flushmount. Standard color non-glare black. Sinksavailable in Scientific Plastics' Rainbow of Colors on special order.

SYMBOL A B C D E F G H OUTLET

W31420-000 12" 12" 8" 14.5" 14.5" 3.5" 3.5" 11" 1.5"

W31431-000 14" 10" 6" 16.38" 12.38" 4" 3.75" 9" 1.5"

W31452-000 16" 8" 7" 18.5" 10.5" 4" 4" 9.25" 1.5"

W31453-000 16" 16" 5.5" 18.5" 18.5" 3.5" 3.5" 8-1/4" 1.5"

W31454-000 16" 16" 8" 18.5" 18.5" 11".5" 11".5" 3.5" 1.5"

W31457-000 18" 12" 8" 20.75" 14.75" 3" 3" 10.25" 1.5"

W31458-000 18" 12" 5.5" 20.75" 14.75" 4" 4" 8-1/2" 1.5"

W31461-000 18" 14" 10.5" 20.5" 16.5" 3.5" 3.5" 13.25" 1.5"

W31462-000 18" 15" 8" 20.5" 17.5" 4" 4" 10.25" 1.5"

W31463-000 18" 15" 12" 20.5" 17.5" 4" 4" 15" 1.5"

W31464-000 18" 15" 10" 20.5" 17.5" 3.5" 3.5" 13.25" 1.5"

W31465-000 18" 15" 5.5" 20.5" 17.5" 3.5" 3.5" 8-1/2" 1.5"

W31470-000 21" 18" 10" 23.5 20.5" 3.5" 3.5" 12.75" 1.5"

W31479-000 23" 18" 12" 25.5 20.5" 4" 4" 14.25" 1.5"

W31480-000 24" 16" 8" 26.5" 18.5" 4" 4" 11" 1.5"

W31485-000 25" 15" 10" 27.5" 17.5" 4" 4" 13" 1.5"

W31490-000 28" 20" 9" 30.5 22.5 4" 4" 12" 1.5"

W31492-000 31" 17" 10" 33.5" 19.5" 4" 4" 13.5" 1.5"

W31495-000 36" 22" 8" 28.5" 24.5" 4" 4" 10.25" 1.5"

W31496-000 38" 23" 8" 40.5" 25.5" 4" 4" 10.5" 1.5"

PART WASHER

Back Splash

26"

1.5" Outlet

32.5" 26"

8"26" 17.5"

5" 21" 12"

36"

PumpMount

27" 19"

W31085-000

COUNTERTOP DOUBLEBOWL SINK

I

J

F

E A G

B

K

LH

D

M

C N

This sp unit is designed with marine edge on horizontal surfaces to avoidcountertop spilling and a backsplash unit. Uniquely designed one piecemolding with integral sink outlets, edge and backsplash. Unit has attached1-1/8" plywood for easy affixing to any counter or cabinet top unit. Standardcolor is non-glare black.

SYMBOL A B C D E F G J K L M NW31063-000 18" 15" 10" 49" 30" 3" 2.6875" 8.1875" 5" 8.1875" 4" 1.375"

DOUBLE BOWL SINKS

D

F F

A G A G

E B B

C C H

Polyolefin molded one-piece Double Bowl Sinks are a unique innovation inthermoplastic molding technique. One piece construction allows for maxi-mum contamination protection.

Stainless steel rims available for flush mount. Steel rims available for undercounter mount.

SYMBOL A B C D E F G H I OUTLETW31220-000 12" 12" 8" 30.25" 14.5" 3.5" 3.5" 11" 3.625" 1.5"W31263-000 18" 15" 12" 41.25" 17.5" 4" 4" 15" 2.375" 1.5"

W31264-000 18" 15" 10" 41.25" 17.5" 3.5" 3.5" 13" 2.625" 1.5"

I

STRAIGHT WALL SINKS

F G F G

B E B E

A A

C C

Center Sink Corner Sink

A B C D E F G BOWL BOWL OVERALL OVERALL DRAIN DRAIN

PART # LENGTH WIDTH DEPTH LENGTH WIDTH LOCATION LOCATION OUTLETWS211610-000 21" 16" 10" 23.5" 18.5" 8" 13.5" 1.5"WS241517-000 24" 15" 17" 26.5" 17.5" 7.5" 12" 1.5"WS240506-000 24" 5" 6" 26.5" 26.5" 8.75" 12" 1.5"WS261808-000 25.5" 17.5" 8" 28.5" 28.5" 2.5" 12.75" 1.5"WS360506-000 36" 5" 6" 38.5" 38.5" 8" 18" 1.5"WS361624-000 36" 16" 24" 38.5" 38.5" 9" 18" 1.5"WS421816-000 42" 18" 16" 44.5" 44.5" 3.25" 21" 1.5"WS520703-000 52" 6.5" 3" 54.5" 54.5" 4" 26" 1.5"WS161208-000 16" 12" 8" 18.5" 14.5" 4" 4" 1.5"W31484-000 24" 24" 24" 26.25" 26.25" 12" 12" 1.5"W31493-000 30" 18" 18" 32.5" 20.5" 3.5" 3.5" 1.5"

SPECIAL USE CUPSINK

D E A B

FC H

Available with undercounter steel rim or stainless steel flush mounting rim.Standard color is non-glare black. Optional stainless steel instrument screenalso available.

SYMBOL A B C D E F H THREADW31424 13.75" 4.5" 5.4375" 16.5" 7.25" 0.25" 7.75" 1.5"

CUPSINKROUND STRAIGHT WALL DESIGN

BA

E

C

D

A B

SYMBOL A B C D E THREAD LIPW39021-150 3.25" 4" 2 1/8" 5.25" 3/16" 1.5" 1/4"W39022-150 5.5" 6 9/16" 4" 6.5" 3/16" 1.5" 1/4"

CUPSINK

A

C

D

B

6" HEMISPHERICAL CUPSINK

SYMBOL A B C DW39023 8" 6.25" 6.25" 8"

WALL MOUNT CUPSINK

D E

A B F

K

C G

H J

SYMBOL OUTLET A B C D E F G H J THREAD KW39026-150 1.5 NPS 5.88" 2.63" 4.63" 7" 3.88" 5.13" 6.88" 4.63" 2" 1.5" .25"

WALL MOUNT CUPSINKWITH BACKNUT (INCLUDED)

D E A B F

K

C

G

SYMBOL OUTLET A B C D E F G KW39027-150 1.5 NPS 5.88" 2.63" 4.63" 7" 3.88" 5.125" 6.88" 1.5" .25"

BACKNUT = W38953-166

CUPSINKOVAL

F

C D

A

G E

B

Molded-in strainerAvailable in black and white and gray.

SYMBOL A B C D E F G THREAD LIPW39030-150 5 7/8" 2 7/8" 4 3/8" 7" 3 7/8" 1/4" 8 7/16" 1.5" 1/4"W39024-150 9 3/8" 3 3/8" 5 1/2" 10 1/2" 4 3/8" 1/4" 8 1/2" 1.5" 1/4"

WALL MOUNT CUPSINK

F

C

G

D

A H J

SYMBOL OUTLET A B C D E F G H J THREAD LIPW39034-150 1.5 NPS 3.18" 3.18" 3" 4" 5.18" 4.5" 4.75" 4.75" 2" 1.5" .25"W39034-151 1.5 NPS 3.18" 3.18" 3" 4" 5.18" 4.5" 4.75" 4.75" 2" 1.5" .25"W39035-150 1.5 NPS 5.50" 6.56" 4" 6.5" 19" 4.5" 6" 4.75" 1.5" .25"W39035-151 1.5 NPS 5.50" 6.56" 4" 6.5" 19" 4.5" 6" 4.75" 2" 1.5" .25"

OVAL CUPSINKWIDE LIP

F

D C A

E G B

Molded-in strainerAvailable in black and white and gray.

SYMBOL A B C D E F G THREAD LIPW39040-150 5 7/8" 2 7/8" 4 3/8" 4 1/2" 4 3/8" 1/4" 8 7/16" 1.5" 1/4"

7.440

6.000

4.440

15.000

18.720

6.3631-1/2" NPT THREAD

NOTE:ALL DIMENSIONS ARE REFERENCE UNLESS NOTED

PART NUMBER: F164L137-150

ROUND CUP SINK

D

A

C

H

SYMBOL A C D H THREAD LIPW39040-150 12" 7" 15" 10" 1.5" 1.25"

FLUSH MOUNTED RIM

← 3D View of Rim

1-1/2" RAD

B

A

SYMBOL A B FOR SINK # SYMBOL A B FOR SINK #W241517-100 27" 18" W241517 W31461-100 20.5" 16.5" W31461

W31220-100 30.25" 14.5" W31220 W31462-100 20.5" 17.5" W31462

W31264-100 41.25" 17.5" W31264 W31462-100 20.5" 17.5" W31463

W31264-100 17.5" W31463 W31462-100 20.5" 17.5" W31464

W31418-100 14.5" 10.5" W31418 W31462-100 20.5" 17.5" W31465

W31420-100 14.5" 14.5" W31420 W31462-100 20.5" 17.5" W31466

W31424-100 16.5" 7.25" W31424 W31470-100 23.5" 20.5" W31470

W31431-100 16.5" 12.5" W31431 W31470-100 23.5" 20.5" W31473

W31440-100 18" 8" W31440 W31478-100 25.5" 19.5" W31477

W31441-100 18" 15" W31478-100 25.5" 19.5" W31478

W31450-100 18.5" 8.5" W31449 W31479-100 25.5" 20.5" W31479

W31452-100 18.5" 10.5" W31452 W31480-100 26.5" 18.5" W31480

W31454-100 18.5" 18.5" W31453 W31481-100 26.5" 22.5" W31481

W31456-100 18.5" 18.5" W31454 W31485-100 27.5" 17.5" W31485

W31456-100 18.5" 18.5" W31456 W31490-100 30.5" 22.5" W31490

W31457-100 20.75" 15.5" W31457 W31490-100 30.5" 22.5" W31491

W31457-100 20.75" 14.75" W31458 W31492-100 33.5" 19.5" W31492

UNDERCOUNTER RIM

1-1/2" RAD.

B

A

SYMBOL A B FOR SINK # SYMBOL A B FOR SINK #W31220-200 29-5/8" 13-7/8" W31220 W31462-200 19-7/8" 16-7/8" W31463

W31464-200 40-5/8" 16-7/8" W31263 W31462-200 19-7/8" 16-7/8" W31464

W31464-200 40-5/8" 16-7/8" W31464 W31462-200 19-7/8" 16-7/8" W31465

W31420-200 13-7/8" 13-7/8" W31420 W31462-200 19-7/8" 16-7/8" W31466

W31431-200 15-7/8" 15-7/8" W31431 W31470-200 22-7/8" 19-7/8" W31470

W31440-200 17-3/8" 7-3/8" W317440 W31470-200 22-7/8" 19-7/8" W31473

W31441-200 17-3/8" 14-3/8" W31478-200 24-7/8" 18-7/8" W31477

W31450-200 17-7/8" 14-3/8" W31449 W31478-200 24-7/8" 18-7/8" W31478

W31452-200 17-7/8" 9-7/8" W31452 W31479-200 24-7/8" 19-7/8" W31479

W31454-200 17-7/8" 9-7/8" W31453 W31480-200 25-7/8" 17-7/8" W31480

W31454-200 17-7/8" 17-7/8" W31454 W31481-200 25-7/8" 21-7/8" W31481

W31455-200 W31455 W31481-200 25-7/8" 21-7/8" W31483

W31456-200 W31456 W31485-200 26-7/8" 16-7/8" W31485

W31457-200 20-1/8" 14-1/8" W31457 W31490-200 29-3/8" 21-7/8" W31490

W31457-200 20-1/8" 14-1/8" W31458 W31490-200 29-3/8" 21-7/8" W31491

W31461-200 19-7/8" 15-7/8" W31461 W31292-200 32-7/8" 18-7/8" W31492

W31462-200 19-7/8" 16/7/8" W31462

CUPSINK BRACKETAND BACKNUT

C

D

A

B

The units below are designed for 1 to 1-1/4" countertops. Forother depths consult factory. Unit supplied with nut for attach-ment to cupsink.

SYMBOL FOR SINK # A B C DW31413-150 W39021-150 4.5" 6-5/8" 2" 2-1/4"W31414-150 W39024-150 4.5" 6-5/8" 4-5/16" 2-5/16"

W39030-150 4.5" 6-5/8" 4-5/16" 2-5/16"

PLUGS AND BACKNUTS

E

F F

E

Cupsink Strainer Sink Strainer

SYMBOL SIZE E F SYMBOL SIZE E FW31583-150 1.5" 1-13/16" 1.5" W31596-150 1.5" 1-7/16" 11/16"

W31596-200 2" 1-3/4" 3/4"

E E

F

F

Sink Plug Tailpiece Plug

SYMBOL SIZE E F SYMBOL SIZE E FW31597-150 1.5" 1-11/16" 1-3/16" W38901-150 1.5" 1-11/18" 3/8"W31597-200 2" 2-1/16" 1-11/16"

FF

E E Tailpiece Backnut Cupsink Backnut

SYMBOL SIZE E F COLOR SYMBOL SIZE E F COLORW38953-167 1.5" 3-3/8" 3/4" BLACK W31597-150 1.5" 2-3/4" 5/8" BLACKW38953-157 1.5" 3-3/8" 3/4" WHITE W31597-200 1.5" 2-3/4" 5/8" WHITE

TrapsTailpieces

Installation Kit

Traps

Part No. Description

W31552-150 Sink tail piece assembly, 1.5" NPSL, Black

(Also available in White and Grey)

W31595-150 Adjustable riser bottle trap NPT outlet

W31595-158 Adjustable riser, 6"-12"

W31595-168 Adjustable riser, 6"-12" (for use with epoxy or brass tailpiece)

W31595-178 Adjustable riser, 6"-18"

W38512-150 Double-bowl waste assembly

W38586-150 Side double bowl polyolefin trap set

W38595-150 Side double bowl bottle trap set

W38953-152 Sink tail piece assembly w/integral recessed strainer 1.5" NPSL,Black (Also available in White and Grey)

W38953-200 Sink tail piece assembly w/integral recessed strainer 2" NPSL

W39164-150 90º Elbow to convert P to S type traps 1.5"

W39164-200 90º Elbow to convert P to S type traps 2"

W39175-150 Running trap NPTxNPT 1.5"

W39175-200 Running trap NPTxNPT 2"

W39186-150 Adjustable polyolefin trap NPS-MNPT 1.5"

W39186-200 Adjustable polyolefin trap NPS-MNPT 2"

W39186-208 Adjustable riser inlet trap 2x10"

W39195-150 Bottle Trap with visual bottle, 1.5" NPT

W39191-150 All Way trap NPSxMNPT 1.5"

W51595-150 Adjustable riser bottle trap (antisyphon)

W61595-150 Mason Jar style bottle trap, 1.5" NPT

W81595-158 Long sink strainer adapter with gasket

Custom sizes and colors available

TAILPIECE

A

B

SINK TAILPIECE ASSEMBLY

Here is a sturdy tailpiece which has an integral recessed strainer for clog-free drainage flow and easy cleaning; 1-1/2" NPSL thread, plug, backnutand gasket.

SYMBOL SIZE A B COLORW38953-152 1.5" NPSL 3-3/8" 3-3/4" BLACKW38953-154 1.5" NPSL 3-3/8" 3-3/4" GREYW38953-158 1.5" NPSL 3-3/8" 3-3/4" WHITE

TAILPIECE

A .25" Thickness

B

SINK TAILPIECE ASSEMBLY

Here is a sturdy tailpiece which has an integral recessed strainer for clog-free drainage flow and easy cleaning; 1-1/2" NPSL thread, plug, backnutand gasket.

SYMBOL SIZE A B COLORW31552-150 1.5" NPSL 3-3/8" 3-3/4" BLACKW31552-154 1.5" NPSL 3-3/8" 3-3/4" GREYW31552-158 1.5" NPSL 3-3/8" 3-3/4" WHITE

TAILPIECE

A

B

C

Here is a sturdy tailpiece which has a removable strainer for easycleaning. 2" NPSL thread, plug, backnut and gasket.

SYMBOL SIZE A B COLORW38953-200 2" NPSL 3 -3/8" 2-1/4" BLACK

TRAP

A

B

W31595-150

ADJUSTABLE RISER BOTTLE TRAP

This unit developed for ease of installation and for neat cleanappearance. (NPT outlet shown)

SYMBOL INLET OUTLET A BMin Max

W31595-150 1.5" NPS 1.5" NPT 3" 3 7-1/4"

Above is made of polyolefin material. Conforms to ASTM specifications #F1412-92.

TRAP

A

B

C

ADJUSTABLE RISER BOTTLE TRAP(ANTISYPHON)

Special Antisyphon action and additional bowl capacity make thisunit the latest in Scientific Plastics' improvements in its trap line.Also available with 12" Riser option.

SYMBOL SIZE A B CMin Max

W51595-150 1.5" 3" 2" 4-1/4" 7-3/8"

TRAP

A

B

C

SYMBOL SIZE A B CMin Max

W61595-150 1.5" 3" 2" 4-1/4" 5-1/8"

Adapter converts standard bottle trap to accept Mason jarstyle bottles. 1 quart plastic jars are available.

TRAP

A

B

DOUBLE-BOWL WASTE ASSEMBLY(SIDE DRAIN WITH ADJUSTABLE RISER TRAP)

This double-bowl assembly offers up to 15-1/2" adjustability between tailpiece centers.Extensions available for longer centers. A central baffle prevents crossflow of waste toopposite branches. Offer full flow drainage with minimum drop to trap. Inlets are 1-1/2"NPS loose nut and outlet is 1-1/2" NPS thread. Color is white.

SYMBOL INLET OUTLET A MIN. A MAX. B MIN. B MAX.W38595-150 1.5" NPS 1.5" NPSL 4.5" 20" 6" 9.5"

TRAP

A

B

ADJUSTABLE RISER

SYMBOL SIZE A BMin Max

W31595-158 1.5" 1.5" 6" 12"W31595-168* 1.5" 1.5" 6" 12"W31595-178 1.5" 1.5" 6" 12"

Note: *For use with Expoxy or Brass Tailpiece

WASTE

A

B

DOUBLE-BOWL WASTE ASSEMBLY

This double-bowl assembly offers up to 14" adjustability between tailpiece centers. Acentral baffle prevents crossflow of waste to opposite branches. Offers full flow drainagewith minimum drop to trap. Inlets are 1-1/2" NPS loose nut and outlet is 1-1/2" NPSthread. Color is white. Order trap separately.

SYMBOL A MIN. A MAX. BW38512-150 21-5/8" 4.5" 4-5/8"

TRAP

DOUBLE-BOWL WASTE ASSEMBLY(SIDE DRAIN WITH ADJUSTABLE RISER TRAP)

This double-bowl assembly offers up to 15-1/2" adjustability between tailpiece centers.Extensions available for longer centers. A central baffle prevents crossflow of waste toopposite branches. Offers full flow drainage with minimum drop to trap. Inlets are 1-1/2"NPS loose nut and outlet is 1-1/2" NPS thread. Color is white.

SYMBOL INLET OUTLET A MIN. A MAX. B MIN. B MAX.W38586-150 1.5" NPS 1.5" NPSL 4.5" 20" 6" 8.5"

ELBOW

W39164-150 (1-1/2")W39164-200 (1-1/2")

90º Elbow converted "W" to "S" type trapsFNPS Loose Nut XMNPT 1-1/2"

TRAP

A

B

C

ADJUSTABLE RISE OLYMPIC TRAP

This unit offers many advantages to the installer. Short compact size with up to 5-1/2"adjustability on the riser and molded 1-1/2" male thread outlet make for fast, easyinstallation to any piping system. While color makes for a clean, neat installation.Removable base unit allows for easy maintenance.

SYMBOL INLET OUTLET A B CMin Max

W39186-150 1.5" NPS 1.5" NPT 4-7/8" 1-3/8" 6 2.5"W39186-200 2" NPS 2" NPT 6-1/4" 2-1/2" 10.5" 3.5"

TRAP

A

A1

B

B1

C

ALL WAY OLYMPIC TRAP

This unit offers the ultimate in versatility, offering adjustable riser in either the "P" or "S" configurationswith molded 1-1/2" male thread to adapt readily to any other type of piping. This unit molded in whitefor clean, neat appearance in any system. Removable base allows for easy maintenance afterinstallation.

SYMBOL INLET OUTLET A A1 B B1 CMin Max Min Max

W39191-150 1.5" NPS 1.5" NPT 9-1/8" 6 2.5" 7-1/4" 5-3/4" 10.5" 2.5"

TAILPIECE

C

A

B

LONG SINK STRAINER ADAPTER WITH GASKET

SYMBOL A B CS81595-158 12" 1.9" .53"

Scientifics faucets have been utilized in Polypropylene Faucetshundreds of hospitals and research laboratories Scientifics Polypropylene Faucets aresince 1965…proof that they represent your best manufactured from pure unpigmented virgininvestment in high purity transportation products. Type I homopolymer per ASTM D 4101,

using no anti-oxidants, pigments or other We have a complete line of countertop and foreign substances often associated withwall mounted Laboratory Faucets activated by other plastic piping products. This resultsa quick turn needle valve. Also available are in an ideal system for the transportation ofLaboratory Faucets with integral vacuum deionized or distilled water or other liquidsbreakers and recirculating faucets. where a high degree of purity is required.

Polypropylene's smooth surfaces do not attract PVDF also offerscontaminants so they do not provide breedingplaces for bacteria and other biological • Exceptional chemical and abrasionimpurities. resistance

Elevated temperature rating of 280 F• Scientifics High Purity systems • High resistance to gamma radiation

features no metallics in the • Total resistance to ultra-violet radiationsystem, ability to withstand • Highly transparent to ultra-violethigh temperatures (210º F max.), radiation

• Will not support growth of fungi• Excellent chemical resistance • Smooth surfaces that do not allow the

and non-porous surfaces. collection of bacteria and fungiUL 94 V-O

PVDF Faucets

Scientifics also offers Laboratory Faucetsdesigned for Ultra high purity applications.They are produced using high purity, unpig-mented, natural Kynar PVDF (polyvinylidenefluoride) resin conforming to ASTM D322,Kynar is 100% pure PVDF containing nocolorants or stablizing additives. Independentstudies have demonstrated that productsmanufactured from PVDF add no detectableleachants or other contaminants to testsolutions. PVDF meets the most stringentindustry requirements for extractables andpurity levels for 18 megohm deionized water.

HIGH PURITY LABORATORY FAUCETS

SPF 10 SPF 30VB VB

5-1/2" 5-3/4"

6" 6" 13-1/2" 13-1/2"

2-3/8" 2-3/8"

1-1/2" Standard 2-1/2" 1-1/2" Standard 2-1/2" Pipe Thread Pipe Thread

3" 3"

Recommended Specifications Recommended SpecificationsWelded Assembly Deck mounted Laboratory Faucet Threaded Assembly Deck mounted Laboratory Faucetwith integral vacuum breaker manufactured from with integral vacuum breaker manufactured fromVirgin unpigmented resin. Virgin unpigmented resin. Polypropylene per ASTM D 4101 PVDF per ASTM D 3222 Polypropylene per ASTM D 4101 PVDF per ASTM D 3222

SPF 20 SPF 40VB VB

5-3/4" 5-3/4"

6" 13-3/4" 6" 13-3/4"

2-1/2" 2-1/2"

2-11/16" 3" 2-11/16" 3"

1-1/2" Standard 1-1/2" Standard Pipe Thread Pipe Thread

Recommended Specifications Recommended SpecificationsWelded Assembly Wall mounted Laboratory Faucet Threaded Assembly Wall mounted Laboratory Faucetwith integral vacuum breaker manufactured from with integral vacuum breaker manufactured fromVirgin unpigmented resin. Virgin unpigmented resin. Polypropylene per ASTM D 4101 PVDF per ASTM D 3222 Polypropylene per ASTM D 4101 PVDF per ASTM D 322


SPF 10 SPF 30STD STD

5-3/4" 5-3/4"

13-3/4" 13-3/4" 6" 6"

2-3/8" 2-3/8"

1-1/2" Standard 2-1/2" 2-1/2"Pipe Thread

3" 3"

Recommended Specifications Recommended SpecificationsWelded Assembly Deck mounted Laboratory Faucet Threaded Assembly Deck mounted Laboratory Faucetmanufactured from Virgin unpigmented resin. manufactured from Virgin unpigmented resin. Polypropylene per ASTM D 4101 PVDF per ASTM D 3222 Polypropylene per ASTM D 4101 PVDF per ASTM D 3222

SPF 20 SPF 40STD STD

5-3/4"5-3/4"

6" 13-3/4" 6" 14-1/8"

2-1/2" 2-1/2" 2-11/16" 2-11/16"

3" 3"

1/2" Standard 1/2" Standard Pipe Thread Pipe Thread

Recommended Specifications Recommended SpecificationsWelded Assembly Wall mounted Laboratory Faucet Threaded Assembly Wall mounted Laboratory Faucetmanufactured from Virgin unpigmented resin. manufactured from Virgin unpigmented resin. Polypropylene per ASTM D 4101 PVDF per ASTM D 3222 Polypropylene per ASTM D 4101 PVDF per ASTM D 322


Recirculating Faucet Recirculating Faucet PP Deck mounted Recirculating LaboratoryFaucet manufactured from Virgin unpigmentedType I Homopolymer Polypropylene per ASTMD 4101. Inlet and Outlet to be 1/2" femalepipe thread, and molded into base. Unit to beactivated by needle valve of same resin,

6 3/8" mounted at point of release of fluid.

15-3/4" 6"

1-5/16"

3-3/8" Outlet 1/2"-14 NPT

2-1/2" 1-9/10"

Inlet 1/2"-14 NPT

Recirculating Faucet PVDF Deck mounted Recirculating Laboratory Faucetmanufactured from Virgin unpigmented PVDF resinper ASTM D 3222. Inlet and Outlet to be 1/2"female pipe thread, and molded into base. Unit tobe activated by needle valve of same resin, mountedat point of release of fluid.

Meets ASTM F1412

PIPE AND FITTINGS

Part No. Description SizeW39164-150 90º Elbow to convert P to S type traps 1.5"W39164-200 90º Elbow to convert P to S type traps, 2" 2"W59201-150 Female national pipe thread X Handtite Socket 1.5"W59201-200 Female national pipe thread X Handtite Socket 2"W59203-150 Coupler 1.5"W59203-200 Coupler 2"W59205-150 90º Elbow 1.5"W59205-200 90º Elbow 2"W59206-150 Street 90º 1.5"W59206-200 Street 90º 2"W59207-150 45º Elbow 1.5"W59207-200 45º Elbow 2"W59208-150 Street 45º 1.5"W59208-200 Street 45 2"W59209-150 Sanitary tee 1.5"W59209-200 Sanitary tee 2"W59210-150 Double Sanitary Tee 1.5"W59210-200 Double Sanitary Tee 2"W59211-150 Plug 1.5"W59211-200 Plug 2"W59212-150 Male national pipe thread X Handtite Socket 1.5"W59212-200 Male national pipe thread X Handtite Socket 2"W59222-151 Spigot adapter 1.5"W59227-150 Flanged elbow 1.5"

HANDTITE

M

MS FNPSL

Female National Pipe Thread X Handtite Socket

SYMBOL M MS FNPSLW59201-150 2-3/8" 1.5" 1.5"W59201-200 2-1/2" 2" 1.5"

HANDTITE

H

COUPLING

SYMBOL H SW59203-150 3-3/8" 1.5"W59203-200 3-3/4" 2"

HANDTITE

A

ELBOW 90

SYMBOL A SW59205-150 2-5/8" 1.5"W59205-200 3-3/8" 2"

HANDTITE

C

B

STREET 90º

SYMBOL B C SW59206-150 2-5/8" 2-5/8" 1.5"W59206-200 2" 3" 2"

HANDTITE

D

E

ELBOW 45º

SYMBOL D E SW59207-150 2-3/8" 1-5/8" 1.5"W59207-200 2-7/8" 2-1/8" 2"

HANDTITE

F

G

STREET 45º

SYMBOL F G SW59208-150 2-3/8" 1.5" 1.5"W59208-200 2-3/8" 1-15/16" 2"

HANDTITE

I

J

SANITARY TEE

SYMBOL I J SW59209-150 3" 2.25" 1.5"W59209-200 3-1/4" 3-1/4" 2"

HANDTITE

N

MALE NATIONAL PIPE THREAD X HANDTITE SOCKET

SYMBOL N SW59212-150 2-5/8" 1.5"W59212-200 2-11/16" 2"

HANDTITE

A

ADAPTER

This Handtite spigot adapter converts any Handtite socket to 1" pipe of1-3/4" tubing.

SYMBOL SIZE TUBE SIZE AW59222-150 1.5" Spigot .75"-1" 4.5"

HANDTITE

B

A

C

FLANGED ELBOW

Short pattern flanged 90 elbow designed for tight spaces such asFume Hood walls.

SYMBOL SIZE A B CW59227-150 1.5" 3" 1.5" 3.5"

Sink Over-flowBasket Sink Strainer

Remote Control Pop-Up Basket StrainerStandpipe

Bench Top Sleeve

ACCESSORIES

Part No. DescriptionW31559-154 4" tailpiece beehive standpipeW31559-156 6" tailpiece beehive standpipeW31559-158 8" tailpiece beehive standpipeW31559-160 10" tailpiece beehive standpipeW31556-154 4" sink standpipeW31556-156 6" sink standpipeW31556-158 8" sink standpipeW31556-159 9" sink standpipeW31556-160 10" sink standpipeW31555-154 4" tailpiece standpipeW31555-156 6" tailpiece standpipeW31555-157 7" tailpiece standpipeW31555-158 8" tailpiece standpipeW31555-159 9" tailpiece standpipeW31555-160 10" tailpiece standpipeW31555-209 2"-9" tailpiece standpipeW38555-150 Sink over-flow assemblyW38557-150 Sink over-flow assemblyW38555-130 For other wasteW38575-001 Bench top sleeve, 4"x4"W38577-001 Bench top sleeve, 6"x3"W38576-200 Bench top sleeve,2" roundW38576-301 Bench top sleeve 3" roundW38958-153 Stainless steel basket sink strainer

INTEGRAL SINK OVER-FLOW(Specify type of Sink)

W38557-150

Long grid for Hole cutout sizeEpoxy Sinks 1.125"

Short grid forScientific Plasticsor Stainless Steel 2.750"Sinks

Standard 18" of 1" flex tubing Additional tubing is available

1.5" FNPT Modifiedto fit all wastes

Overlow Adapter Internal backflow preventer

1.5" MNPT Overall length 3"

INTEGRAL SINK OVER-FLOW SPECIFICATION

Integral overflow unit for lab sinks to be manufactured of Virgin Polyolefin, (polypropylene), material to meetASTM 1412 standard.

Overflow assembly to consist of grid connection located on the side of the sink, two inches below the topsurface. A flexible tube made of polypropylene, one inch in diameter, connects the grid conection to an1-1/2" diameter adapter attached to the sink outlet. To prevent wastewater from backing up into the sink,the adapter must include an integral backflow preventor.

SINK OVERFLOW ASSEMBLY OPTIONS

W38557-150

Long grid for Hole cutout Epoxy Sinks size 1.125"

Short grid for Scientific Plastics or Stainless Steel 2.750" Sinks

Standard 18" of 1" flex tubing 1.5" FNPT Modified Additional tubing is available to fit all wastes Overlow Adapter

1.5" MNPT Internal backflow preventer Overall length 3"

Waste Optional Waste Optional Waste Optional

Olympic Trap Bottle Trap All Way

STAINLESS STEEL BASKET SINK STRAINER

INSTALLATION INSTRUCTIONS

EA. Place strainer body (3) in sink opening

with smaller dry fixing, washer (4) 1underneath as shown.

B. Position larger sponge washer (5) onPlastic underbody (6) and secure to 2strainer body by hand tighteningstainless steel pin (2).

3C. Position strainer top (1) in strainer

body.

D. Press down on black handle of strainer 4top to retain water in sink bowl and pullgently to release water for normal 5discharge.

F

H6

G

-

SYMBOL E F G HW38958-153 3-1/8" 4-1/2" 3-1/4" 1-3/4"

STAND PIPE BEEHIVE

C

A

TAILPIECE STAND PIPE

SYMBOL A CW31559-154 9/16" 4"W31559-156 9/16" 6"W31550-158 9/16" 8"W31559-160 9/16" 10"

Available Colors: White, Black, Companion GreyTop Only Available in Black

STAND PIPE

B

C

A

SINK STAND PIPE

SYMBOL A B CW31556-154 9/16" 1-5/8" 4"W31556-156 9/16" 1-5/8" 6"W31556-157 9/16" 1-5/8" 7"W31556-158 9/16" 1-5/8" 8"W31556-159 9/16" 1-5/8" 9"W31556-160 9/16" 1-5/8" 10"

STAND PIPE

B

C

A

TAILPIECE STAND PIPE

SYMBOL A B CW31555-154 9/16" 1-5/8" 4"W31555-156 9/16" 1-5/8" 6"W31555-157 9/16" 1-5/8" 7"W31555-158 9/16" 1-5/8" 8"W31555-159 9/16" 1-5/8" 9"W31555-160 9/16" 1-5/8" 10"W31555-200 9/16" 1-15/16" Min. 2"

Max. 9"

Available Colors: White, Black and Companion Grey

BENCH TOP SLEEVE

C

A

D BISOMETRIC

E

SYMBOL A B C D EW38575-001 4" 2" 2" 4" 6"W38577-001 6" 3" 2" 5" 8"

*Approximate Wall thickness - 3/16"

This sleeve is used to penetrate the top of a cabinet so that vacuum hoses and other fragilepiping can be brought out of the cabinet through the top without cutting or scraping the hose.

BENCH TOP SLEEVEW38576-200/301 - 2" & 3"

***Please specify 2" or 3" OD when placing Order***

D

A E C

B

This sleeve is used to penetrate the top of a cabinet so that vacuum hosesand other fragile piping can be brought out of the cabinet through the topwithout cutting or chafing the hose.

SYMBOL A B C D EW38576-201 2" OD 2" OD 2.25" 5" 5"W38576-301 3" OD 3" OD 2.25" 5" 5"

PASS THRU

Thread Length Thread Length

I.D. O.D.

Overall Length

Inside wall thickness

Outside wall thickness

Please check boxfor cap style andpass thru size.

Closed Cap Gasketed Cap

These are inside dimensions

1-1/2" pass thru2" pass thru3" pass thru4" pass thru6" pass thru

2" FLEX PASS THRU(LC 38580-200)

14" Fully Assembled

10" of flex tube

Roto-MoldedTrays and Shelf Liners

Laboratory Spill Trays

Product No. Size DescriptionT521009-201 10"x09" Laboratory Spill TrayT521209-201 12"x09" Laboratory Spill TrayT521212-201 12"x12" Laboratory Spill TrayT521410-201 14"x10" Laboratory Spill TrayT521411-201 14"x11" Laboratory Spill TrayT521413-201 14"x13" Laboratory Spill TrayT521414-201 14"x14" Laboratory Spill TrayT521608-201 16"x08" Laboratory Spill TrayT521611-201 16"x11" Laboratory Spill TrayT521613-201 16"x13" Laboratory Spill TrayT521614-201 16"x14" Laboratory Spill TrayT521709-201 17"x09" Laboratory Spill TrayT521714-201 17"x14" Laboratory Spill TrayT521716-201 17"x16" Laboratory Spill TrayT521717-201 17"x17" Laboratory Spill TrayT521809-201 18"x09" Laboratory Spill TrayT521814-201 18"x14" Laboratory Spill TrayT521816-201 18"x16" Laboratory Spill TrayT521818-201 18"x18" Laboratory Spill TrayT521912-201 19"x12" Laboratory Spill TrayT521913-201 19"x13" Laboratory Spill TrayT521914-201 19"x14" Laboratory Spill TrayT521915-201 19"x15" Laboratory Spill TrayT521916-201 19"x16" Laboratory Spill TrayT521918-201 19"x18" Laboratory Spill TrayT522010-201 20"x10" Laboratory Spill TrayT522011-201 20"x11" Laboratory Spill TrayT522013-201 20"x13" Laboratory Spill TrayT522014-201 20"x14" Laboratory Spill TrayT522017-201 20"x17" Laboratory Spill TrayT522019-201 20"x19" Laboratory Spill TrayT522115-201 21"x15" Laboratory Spill TrayT522116-201 21"x16" Laboratory Spill TrayT522117-201 21"x17" Laboratory Spill TrayT522118-201 21"x18" Laboratory Spill TrayT522119-201 21"x19" Laboratory Spill Tray


Product No. Size DescriptionT524622-201 46"x22" Laboratory Spill TrayT524710-201 47"x10" Laboratory Spill TrayT524713-201 47"x13" Laboratory Spill TrayT524719-201 47"x19" Laboratory Spill TrayT524728-201 47"x28" Laboratory Spill TrayT524828-201 48"x28" Laboratory Spill TrayT525718-201 57"x18" Laboratory Spill TrayT525719-201 57"x19" Laboratory Spill TrayT525805-201 58"x05" Laboratory Spill TrayT525912-201 59"x12" Laboratory Spill Tray

Shelf & Door LinersShelf and door liners are available in many standard sizes. They may also be manufactured to specific needs.Please call or details.

NOTES: 1) All trays may be trimmed to 1", 1-1/2" depths. 2) Tray dimensions are subject to 1/4" plus orminus. 3) Special tray sizes are available. Please call for details.

TRAYS

B H

A

• Protects cabinets and shelving from acid spills• Over 125 sizes of trays available• Available in 1", 1-1/2" and 2" depths• Standard color is natural, special colors available• 3/16" tray walls for rigidity• One-piece, rotationally molded polyolefin• Rounded corners for easy cleaning, dishwasher safe

SYMBOL A B C

Specifications: Laboratory trays or shelf liners shall be a minimum of 3/16" thick, one piece, stress free,molded of virgin polyolefin resins with smooth interior walls and coved corners for easy cleaning. Labora-tory trays and shelf liners shall conform to ASTM #1412-92 for corrosion resistance and material contentand shall be manufactured by Scientific Plastics, Inc. of Kansas City, KS.

Note: None-standard sizes in 1" increments are available.

SHELF LINERS

B

A

• Tough high density polyethylene protects cabinetsand shelving from acid spills

• Over a dozen sizes available to fit most standardsize shelves

• Custom sizes available• All liners are 3/16" thick, 1/8" thickness available

on special order• Polypropylene available on special order

LINER DIMENSIONS A B

Standard Dimensions

Height Width18 12 Specifications: 24 12 Shelf liners shall conform to ASTM # 1412-92 for corrosion 24 18 resistance and shall be manufactured by Scientifc Plastics, Inc.30 12 Of Kansas City, Ks. 30 1836 12 Liners for doors also available.36 1842 1242 1842 2448 1248 1848 2460 1260 1860 24

All sizes in inches. Standard thickness is3/16", 1/8" thickness.

Flexible orStandard Pipe

SOLID AND FLEX VENTS

Scientific Plastics Company, Inc. manufactures a variety of flexible and solid venting systems for use withacids, solvents and other hazardous chemicals. Our venting systems meet the same ASTM standards as ourcorrosion resistant polyolefin piping. Let us customize a venting system to meet your specific needs.

Choose from a variety of styles and types:• Solid vents with mechanical joints Solid• Flex vents with mechanical joints

TYPICAL STANDARD VENTS

Product No. DescriptionF160L06XF-150 Special double acid vent, flexibleF160L06X-150 Double acid vent, 1-1/2"F160L060-150 Acid cabinet ventF160L062-150 Acid vent, ADAF160L90-150 Standard solvent vent, 1-1/2"F160L064F-150 Flexible solvent vent, 1-1/2"F160L79E-150 Double acid vent with spacer, extra long Flex VentF1600350-720 PVE, pump vent, 2"F160610W-150 Acid vent, ADAF1661904-200 Vent assembly, 2"F1690L063-150 Acid vent, extra depthF1690L064-150 Solvent vent, extra depthF2738565-180 Acid vent, flexible, 1-1/2"W38546-150 Solvent vent assembly, (to ductwork)W38551-150 Tall solvent cabinet, double

Contact our Sales Department for design assistance, customventing and specifications.

W59203-150

W59203-150

SINGLE FLEX

• Designed for acid or material cabinets• Squeezed or non-squeezed top• Flexible or standard pipe available• Custom venting made to your order, call for details

Specifications: Venting system shall be manufacturedfrom polyolefin resin and shall conform to ASTM #1412-92for corrosion resistance and material content and shall bemanufactured by Scientific Plastics, Inc. of Kansas City,KS.

W59203-150

W59203-150

DOUBLE FLEX



W59203-150

W59209-150

W59203-150

LIMITED SPACE SINGLE VENT



EXTENDED DEPTH



VERTICAL CABINET

• Designed for acid or flammable material cabinets• Squeezed or non-squeezed top• Flexible or standard pipe available• Custom venting made to your order, call for details


W59205-150

W59205-150

W59205-150

W59

205-

150

W59

209-

150

S5

92

13

-20

1

S5

92

13

-201

Price List SP-0109Effective Jan. 2009

Supercedes All Previous Lists

Tanks

Dilution Tanks/TrapsProduct No. Description Price

W31586-151 Recovery pot, 1-1/2"x1 gallon $246.60W31586-152 Recovery pot, 1-1/2"x2 gallon $259.50W31586-153 Recovery pot, 1-1/2"x5 gallon $272.50W31586-161 Dilution tank bottle, 1 gallon $140.20W31586-162 Dilution tank bottle, 2 gallon $154.30W31585-001 Dilution tank support, 2" $49.30W31585-002 Dilution tank support, 5" $53.10W31585-003 Dilution tank support, 10" $57.30W32505-150 6 gallon dilution tank, 1-1/2" inlet & outlet $336.80W32505-200 6 gallon dilution tank, 2" inlet & outlet $382.80W38525-150 Installation kit for W32505-150 $97.30W32510-150 6 gallon dilution tank, 1-1/2" inlet, outlet & vent $395.70W32510-200 6 gallon dilution tank, 2" inlet, outlet & vent $434.80W38525-151 Installation kit for W32510-150 $123.90W32501-150 1-1/2 gallon square dilution tank, 1-1/2" or 2" inlet/outlet with 3" cleanout on top $285.60W32502-150 1-1/2 gallon square dilution tank, 1-1/2" or 2" inlet/outlet with 3" cleanout on side $285.60W32506-150 5 gallon tank, 1-1/2" or 2" inlet & outlet with 6" cleanout on top $377.30W32507-150 4 gallon tank, 1-1/2" or 2" inlet & outlet with 6" cleanout on top $337.30W59155-200 Dilution tank, one 2" outlet, two 1-1/2" inlet $369.80W59155-201 Dilution tank, one 2" outlet, one 1-1/2" inlet $356.80W59155-202 Dilution tank, one 2" outlet, one 2" inlet $492.90W59155-203 Dilution tank, one 2" outlet, two 2" inlet $510.90W59156-200 Dilution tank, visual, one 2" outlet, two 1-1/2" inlets $376.20W59156-201 Dilution tank, visual, one 2" outlet, one 1-1/2" inlets $363.20W59156-202 Dilution tank, visual, one 2" outlet, one 2" inlets $499.50W59156-203 Dilution tank, visual, one 2" outlet, two 2" inlets $512.60

Neutralization TanksProduct No. Description Price

W32503-000 2 gallon neutralization tank $376.20W32504-000 5 gallon neutralization tank $441.10W32509-000 7-1/2 gallon neutralization tank $532.00W32511-000 15 gallon neutralization tank, 17"x15" $635.70W32515-000 15 gallon neutralization tank, 15"x24" $635.70W32518-000 20 gallon neutralization tank $752.50W32520-000 30 gallon neutralization tank $875.80W32522-000 40 gallon neutralization tank $979.40W32525-000 55 gallon neutralization tank $1,070.50W32530-000 100 gallon neutralization tank $1,342.80W32535-000 150 gallon neutralization tank $1,725.70W32537-000 180 gallon neutralization tank $2,257.60W32540-000 200 gallon neutralization tank $2,387.40W32545-000 275 gallon neutralization tank $2,789.70W32555-000 360 gallon neutralization tank $3,211.30

Tanks

Neutralization TanksProduct No. Description Price

W32555-000 360 gallon neutralization tank $3,211.30

Rectangular TanksProduct No. Description Price

W32802-151 8"x8"x8" Bolted $430.50W32805-151 10"x16"x8" Bolted $597.40W32815-201 12"x24"12" Bolted $774.60

Bookshelf - Flat TanksProduct No. Description Price

W121206-001 3 gallon tank, 12"x12"x6", w/1-1/2" I & O, 3" Access Cap $345.00W181406-001 5 gallon tank, 18"x14"x6", w/1-1/2" I & O, 3" Access Cap $350.00

With Red CoverProduct No. Description Price

W32503-405 2 gallon tank w/red cover $432.10W32504-405 5 gallon tank w/red cover $496.20W32509-405 7-1/2 gallon tank w/red cover $611.10W32511-405 15 gallon tank w/red cover $730.50W32518-405 20 gallon tank w/red cover $865.40W32520-405 30 gallon tank w/red cover $1,006.80

Special Application TanksSpecial Application tanks are available on special order. Please call for specifics.

Neutralization MonitorsNeutralization Monitors are available on special order. Please call for specifics.

LimestoneProduct No. Description Price

W32599-050 Limestone Chips, 50 lb. bag $36.20

NOTE: 1) Most tanks can be supplied with FPT, MPT or plain end connections for the same price. Please specifyconnection type when ordering. Tanks can be FRP (fiberglass) wrapped. 2) Larger tanks available on special order.3) Tanks often ship dimensional weight. Consult freight carrier for details on dimensional weight. 4) Colored andpolypropylene tanks are available on special order.

Sinks

SinksCountertop UnitsProduct No. Description PriceW31063-000 Double sink countertop, black $2,069.70W31081-000 Single sink countertop, black $1,334.10

Double BowlProduct No. Description PriceW31220-000 Double bowl sink, black, 12"x12"x8" $616.30W31263-000 Double bowl sink, black, 18"x15"x12" $843.50W31264-000 Double bowl sink, black, 18"x15"x10" $830.40W--------100 Flush mounting rim for double bowl sink $75.30W--------200 Undercounted rim for double bowl sink $58.40

Single BowlProduct No. Description PriceW31415-000 Centered sink, 11"x11"x7", black $155.80W31418-000 Centered sink, 12"x8"x8", black $155.80W31420-000 Corner sink, 12"x12"x8", black $181.60W31424-000 Centered sink, 13-3/4"x4-1/2"x5-1/2", black $181.60W31424-400 Instrument screen P31424-000 $76.40W31431-000 Corner sink, 14"x10"x6", black $175.30W31440-000 Centered sink, 16"x6"x6", black $207.60W31449-000 Centered sink, 16"x6"x6", black $207.70W31452-000 End sink, 16"x8"x7", black $181.60W31453-000 Corner sink, 16"x16"x5-1/2", black, ADA $285.60W31454-000 Corner sink, 16"x16"x8", black $298.30W31455-000 Corner sink, 17"x17"x12", black $311.40W31456-000 Corner sink, 16"x13"x6", black $304.90W31457-000 Corner sink, 18"x12"x8", black $311.40W31458-000 Corner sink, 18"x12"x5-1/2", black, ADA $298.30W31461-000 Corner sink, 18"x14"x10-1/2", black $292.70W31462-000 Corner sink, 18"x15"x8", black $285.60W31463-000 Corner sink, 18"x15"x12", black $311.40W31464-000 Corner sink, 18"x15"x10", black $298.30W31465-000 Corner sink, 18"x15"x5-1/2", black, ADA $298.30W31466-000 Center sink, 18"x15"x12" $311.40W31470-000 Corner sink, 21"x18"x10", black $318.10

Single BowlProduct No. Description PriceW31473-000 Center sink, 21"x18"x12", black $330.60W31477-000 Center sink, 23"x17"x8", black $324.40W31478-000 Center sink, 23"x17"x11-12", black $337.30W31479-000 Corner sink, 23"x18"x12", black $350.40W31480-000 Corner sink, 24"x16"x8", black $337.30W31481-000 Center sink, 24"x20"x10", black $400.80W31483-000 Center sink, 24"x20"x12", black $400.80W31485-000 Corner sink, 25"x15"x10", black $369.90W31490-000 Corner sink, 28"x20"x9", black $432.10W31491-000 Corner sink, 28"x20"x12", black $491.80W31492-000 Corner sink, 31"x17"x10", black $688.10W31495-000 Corner sink, 36"x22"x8", black $807.40W31496-000 Corner sink, 38"x23"x8", black $890.90W--------100 Flush mounting rim for single bowl sink $64.80W--------200 Undercounter rim for single bowl sink $58.40

Straight Wall SinksProduct No. Description PriceWS121208-400 Center sink, 12"x12"x8", 4" outlet, black $194.60WS161208-000 Corner sink, 16"x12"x8", black $207.70WS211610-000 Center sink, 21"x16"x10", black $275.10WS241517-000 Center sink, 24"x15"x17", black $448.90WS240506-000 Center sink, 24"x5"x6", black $258.30WS261808-000 Center sink, 25-1/2"x17-1/2"x8", black $337.30WS360506-000 Center sink, 36"x5"x6", black $337.30WS361624-000 Center sink, 36"x16"x24", black $1,529.90WS421816-000 Center sink, 42"x18"x16", black $1,529.90W31484-000 Corner sink, 24"x24"x24, black $726.70W31493-000 Corner sink, 30"x18"x18", black $726.70

Round Cup & Wall Mount Sinks (optional colors available)Product No. Description PriceW39021-150 4" round, black, straight wall design $51.80W39021-151 4" round, white, straight wall design $56.70W39022-150 6" round, black, straight wall design $54.40W39022-151 6" round, white, straight wall design $58.50W39023-000 8" hemi, black, straight wall design $85.70W39034-150 4" wall mount, vertical $103.90W39034-151 4" wall mount, vertical, white $106.30W39035-150 6" wall mount, vertical $106.30W39035-151 6" wall mount, vertical, white $111.50W39050-150 12" round, straight wall design $149.10

Oval Cup Sinks (optional colors available)Product No. Description PriceW39024-150 3"x9", 1-1/2" thread, black $80.60W39026-150 3"x6", 1-1/2" thread, wall mount, vertical $90.90W39027-150 3"x6", 1-1/2" thread, wall mount, horizontal $71.30W39030-150 3"x6", 1-1/2" thread, deep oval, black $51.80W39036-451 4" horizontal cup sink w/spigot $121.50W39040-150 3"x6", 1-1/2" thread, deep oval, black, wide lip $51.80W39060-150 3"x6", 1-1/2" thread, low profile oval, black $101.20F164L137-150 3"x6", 1-1/2" thread, low profile oval, black w/pipe e $111.10W31414-150 Cup sink holder & nut $16.60

Sink AccessoriesProduct No. Description PriceW31596-150 Strainer, 1-1/" $5.80W31597-150 Plug, 1-1/2" $5.80

FittingsProduct No. Description PriceW39164-150 90 degree elbow to convert P to S type traps, 1-1/2" $19.50W39164-200 90 degree elbow to convert P to S type traps, 2" $23.50W59201-150 Female NPT thread x handtite socket, 1-1/2" $17.90W59201-201 Female NPT thread x handtite socket, 2" $36.50W59203-150 Coupling, 1-1/2" $22.00W59203-200 Coupling, 2" $27.20W59204-201 Reducer, 2" $35.10W59205-150 90 degree elbow, 1-1/2" $23.50W59205-200 90 degree elbow, 2" $39.70W59206-150 Street 90 degree, 1-1/2" $22.70W59206-200 Street 90 degree, 2" $39.70W59207-150 45 degree elbow, 1-1/2" $23.50W59207-200 45 degree elbow, 2" $35.60W59208-150 Street 45 degree, 1-1/2" $23.50W59208-200 Street 45 degree, 2" $35.60W59209-150 Sanitary tee, 1-1/2" $32.40W59209-200 Sanitary tee, 2" $39.70W59212-150 MPT thread x handtite socket, 1-1/2" $19.50W59212-200 MPT thread x handtite socket, 2" $30.30W59222-151 Spigot adapter, 1-1/2" $15.20W59227-150 Flanged elbow, 1-1/2" $18.40

FaucetsProduct No. Description Polypro PVDFSPF 10-STD Welded valve facuet, deck mount $355.60 $641.60SPF 20-STD Welded valve facuet, wall mount $376.90 $698.70SPF 30-STD Threaded valve facuet, deck mount $408.10 $698.70SPF 40-STD Threaded valve facuet, wall mount $420.50 $714.70SPF 10-VB Welded valve facuet, deck mount w/ vac/break $432.20 $740.60SPF 20-VB Welded valve facuet, wall mount w/ vac/breaker $445.90 $941.10SPF 30-VB Threaded valve facuet, deck mount w/vac/breaker $460.50 $826.90SPF 40-VB Threaded valve facuet, wall mount w/vac/breaker $475.00 $834.10

SPRF-1 Deck mount recirculating faucet $741.10 $968.70SPF 20-NV Non valve faucet, wall mount $338.10 $684.30SPF 10-NV Non valve faucet, deck mount $338.10 $670.20

TrapsProduct No. Description PriceW31552-150 Sink tailpiece assembly, 1-1/2" NPSL, black $44.10W31552-154 Sink tailpiece assembly, 1-1/2" NPSL, grey $48.70W31552-158 Sink tailpiece assembly, 1-1/2" NPSL, white $48.70W31595-150 Adjustable riser bottle trap, NPT outlet $90.90W31595-158 Adjustable riser, 6"-12" $29.30W31595-168 Adjustable riser, 6"-12" (for use with epoxy or brass tailpiece $35.60W31595-178 Adjustable riser, 6"-18" $58.50W38512-150 Double-bowl waste assembly $94.10W38585-150 Side double bowl polyolefin trap set $123.40W38950-150 Sink tailpiece assembly, 1-1/2", NPSL, black $43.90W38950-154 Sink tailpiece assembly, 1-1/2", NPSL, grey $48.70W38950-158 Sink tailpiece assembly, 1-1/2", NPSL, white $48.70W38595-150 Side double bowl bottle trap set $136.30W38953-152 Sink tailpiece assembly, 1-1/2", NPSL, black $43.70W38953-154 Sink tailpiece assembly, 1-1/2", NPSL, grey $48.70W38953-158 Sink tailpiece assembly, 1-1/2", NPSL, white $48.70W38953-200 Sink tailpiece assembly, 2", NPSL, black $64.90W39164-150 90 degree elbow to convert P to S type traps, 1-1/2" $19.50W39164-200 90 degree elbow to convert P to S type traps, 2" $23.30W39175-150 Running trap, NPTxNPT, 1-1/2" $81.10W39175-200 Running trap, NPTxNPT, 2" $112.90W39185-150 Adjustable riser Olympic trap $81.10W39186-150 Adjustable polyolefin trap, NPS-MNPT, 1-1/2" $81.10W39186-200 Adjustable polyolefin trap, NPS-MNPT, 2" $112.90W39186-208 Adjustable riser trap inlet tube, 2"x10" $38.70W39190-150 All way Olympic trap $94.10W39191-150 All way trap, NPSxMNPT, 1-1/2" $95.30W51595-150 Adjustable riser bottle trap (antisyphon) $96.40W39196-150 Adjustable riser bottle trap $84.40W31595-162 Collar adapter $34.80W61595-150 Mason jar style bottle trap $126.60W61595-155 1 qt. plastic jar $42.30S81595-158 Long sink strainer adapter with gasket, blue pipe tailpiece $38.80S81595-159 Long sink strainer adapter with gasket, black pipe tailpiece $38.80S81595-160 Long sink strainer adapter with gasket, white pipe tailpiece $38.80

AccessoriesProduct No. Description PriceW31559-154 4" tailpiece beehive standpipe $16.70W31559-156 6" tailpiece beehive standpipe $16.90W31559-158 8" tailpiece beehive standpipe $17.40W31559-160 10" tailpiece beehive standpipe $17.40W31556-154 4" sink standpipe $12.60W31556-156 6" sink standpipe $13.10W31556-158 8" sink standpipe $14.10W31556-159 9" sink standpipe $14.10W31556-160 10" sink standpipe $15.70W31555-154 4" tailpiece standpipe $12.60W31555-156 6" tailpiece standpipe $13.10W31555-157 7" tailpiece standpipe $13.60W31555-158 8" tailpiece standpipe $14.10W31555-159 9" tailpiece standpipe $15.60W31555-160 10" tailpiece standpipe $15.60W31555-209 2"-9" tailpiece standpipe $24.60W38557-150 Overflow assembly (specify sink & trap) $67.40W38575-001 Bench top sleeve, 4"x2" $39.10W38577-001 Bench top sleeve, 6"x3" $45.40W38576-200 Bench top sleeve, 2", specify OD or ID $47.40W38576-301 Bench top sleeve, 3", round $51.20W38958-153 Stainless steel basket sink strainer, 4-1/2" flange $38.20

Vent AssembliesScientific Plastics leads the industry in the design and manufacture of venting for all types of acid and solvent cabinets. These vents are specialized and can be developed in either solid or flexiblepiping. Call for detailsand pricing specifics.

Laboratory Spill TraysProduct No. Size Description PriceT521009-201 10"x09" Laboratory Spill Tray $52.90T521209-201 12"x09" Laboratory Spill Tray $52.90T521212-201 12"x12" Laboratory Spill Tray $56.90T521410-201 14"x10" Laboratory Spill Tray $53.60T521411-201 14"x11" Laboratory Spill Tray $59.60T521413-201 14"x13" Laboratory Spill Tray $61.40T521414-201 14"x14" Laboratory Spill Tray $62.00T521608-201 16"x08" Laboratory Spill Tray $63.10T521611-201 16"x11" Laboratory Spill Tray $63.40T521613-201 16"x13" Laboratory Spill Tray $64.10T521614-201 16"x14" Laboratory Spill Tray $64.60T521709-201 17"x09" Laboratory Spill Tray $63.50T521714-201 17"x14" Laboratory Spill Tray $64.80T521716-201 17"x16" Laboratory Spill Tray $66.00T521717-201 17"x17" Laboratory Spill Tray $66.90T521809-201 18"x09" Laboratory Spill Tray $64.30T521814-201 18"x14" Laboratory Spill Tray $65.70T521816-201 18"x16" Laboratory Spill Tray $66.60T521818-201 18"x18" Laboratory Spill Tray $68.10T521912-201 19"x12" Laboratory Spill Tray $64.10T521913-201 19"x13" Laboratory Spill Tray $64.60T521914-201 19"x14" Laboratory Spill Tray $66.30T521915-201 19"x15" Laboratory Spill Tray $66.60T521916-201 19"x16" Laboratory Spill Tray $66.10T521918-201 19"x18" Laboratory Spill Tray $68.10T522010-201 20"x10" Laboratory Spill Tray $62.80T522011-201 20"x11" Laboratory Spill Tray $63.40T522013-201 20"x13" Laboratory Spill Tray $65.60T522014-201 20"x14" Laboratory Spill Tray $66.60T522017-201 20"x17" Laboratory Spill Tray $68.60T522019-201 20"x19" Laboratory Spill Tray $69.80T522115-201 21"x15" Laboratory Spill Tray $68.10T522116-201 21"x16" Laboratory Spill Tray $68.60T522117-201 21"x17" Laboratory Spill Tray $69.20T522118-201 21"x18" Laboratory Spill Tray $70.00T522119-201 21"x19" Laboratory Spill Tray $70.90T522210-201 22"x10" Laboratory Spill Tray $63.10T522212-201 22"x12" Laboratory Spill Tray $64.80T522215-201 22"x15" Laboratory Spill Tray $67.50

Laboratory Spill TraysProduct No. Size Description PriceT522216-201 22"x16" Laboratory Spill Tray $68.40T522217-201 22"x17" Laboratory Spill Tray $69.20T522218-201 22"x18" Laboratory Spill Tray $69.40T522219-201 22"x19" Laboratory Spill Tray $70.00T522310-201 23"x10" Laboratory Spill Tray $66.30T522315-201 23"x15" Laboratory Spill Tray $67.70T522316-201 23"x16" Laboratory Spill Tray $68.40T522317-201 23"x17" Laboratory Spill Tray $69.20T522319-201 23"x19" Laboratory Spill Tray $69.50T522321-201 23"x21" Laboratory Spill Tray $70.80T522409-201 24"x09" Laboratory Spill Tray $62.80T522412-201 24"x12" Laboratory Spill Tray $66.30T522424-201 24"x24" Laboratory Spill Tray $85.70T522512-201 25"x12" Laboratory Spill Tray $69.30T522515-201 25"x15" Laboratory Spill Tray $69.50T522516-201 25"x16" Laboratory Spill Tray $70.50T522518-201 25"x18" Laboratory Spill Tray $70.00T522519-201 25"x19" Laboratory Spill Tray $70.90T522525-201 25"x25" Laboratory Spill Tray $87.10T522611-201 26"x11" Laboratory Spill Tray $67.70T522617-201 26"x17" Laboratory Spill Tray $70.90T522619-201 26"x19" Laboratory Spill Tray $71.80T522620-201 26"x20" Laboratory Spill Tray $72.80T522713-201 27"x13" Laboratory Spill Tray $71.80T522717-201 27"x17" Laboratory Spill Tray $73.10T522718-201 27"x18" Laboratory Spill Tray $74.20T522719-201 27"x19" Laboratory Spill Tray $76.30T522810-201 28"x10" Laboratory Spill Tray $67.50T522814-201 28"x14" Laboratory Spill Tray $70.80T522815-201 28"x15" Laboratory Spill Tray $71.80T522816-201 28"x16" Laboratory Spill Tray $73.30T522817-201 28"x17" Laboratory Spill Tray $73.50T522818-201 28"x18" Laboratory Spill Tray $74.80T522910-201 29"x10" Laboratory Spill Tray $68.10T522916-201 29"x16" Laboratory Spill Tray $73.30T522919-201 29"x19" Laboratory Spill Tray $75.40T523016-201 30"x16" Laboratory Spill Tray $73.90T523019-201 30"x19" Laboratory Spill Tray $74.90T523020-201 30"x20" Laboratory Spill Tray $74.20T523028-201 30"x28" Laboratory Spill Tray $97.40T523116-201 31"x16" Laboratory Spill Tray $74.20T523118-201 31"x18" Laboratory Spill Tray $75.30T523119-201 31"x19" Laboratory Spill Tray $75.90T523126-201 31"x26" Laboratory Spill Tray $97.30T523211-201 32"x11" Laboratory Spill Tray $70.60T523214-201 32"x14" Laboratory Spill Tray $73.80T523217-201 32"x17" Laboratory Spill Tray $72.00

Laboratory Spill TraysProduct No. Size Description PriceT523219-201 32"x19" Lab

scientific plastics company, inc.scientificplastics.com/index_htm_files/sp_master_catalog.pdf ·...

Documents