scan shift register/parallel load register
DESCRIPTION
SCAN Shift Register/Parallel Load Register. Laboratory 3. Objectives. Build upon the understanding of CMOS circuits and systems Build upon the experience gained in lab2 ( Use of place and route). Design. Size=20 bits ( Based on your Full Adder design) - PowerPoint PPT PresentationTRANSCRIPT
SCAN Shift Register/Parallel Load
RegisterLaboratory 3
Objectives• Build upon the understanding of
CMOS circuits and systems• Build upon the experience gained in
lab2 ( Use of place and route)
Design• Size=20 bits ( Based on your Full Adder
design)• Should have Serial and Parallel Load
capability• Should use 2 Clocks and their
complements.– CLKA, CLKAbar, CLKB and CLKBbar
• Build using the standard cells of ECE 4/525 and ECE 4/526
Design
Design
Design
Design
Lab Reports• Should contain the Schematic, Physical
Layout (from Silicon Ensemble)• All the Functional Data: Flush delay
tables, Maximum Frequency of operation,
• Mention the input pattern for the Scan Capture
• Mention the pattern for Parallel Load
Lab Report• Show waveforms with the different
corner model for the nominal load and nominal input slew
• Perform Verilog simulation on the extracted layout (Physical Layout out of Place and Route)