scale: 3 = 1'-0 'b
TRANSCRIPT
INTERIOR INSTALLATION
DETAIL 'A'SCALE: 3" = 1'-0"
DETAIL 'B'SCALE: 3" = 1'-0"
48" MAX O.C. CROSS TEE SPACING
MAIN TEE O.C. SPACING VARIES,
24" MIN - 48" MAX SPACING
12 GA HANGER WIRE, BYOTHERS, NOT BY HUNTERDOUGLAS. SEE DETAIL A1.2
CROSS TEE 48" O.C., TYP.,CENTERED MID PANEL
MAIN TEE
TORSIONSPRING
TORSIONSPRINGPANEL
12 GA HANGER WIRE, 48" O.C. ALONGMAIN TEE, NOT BY HUNTER DOUGLAS
MAIN TEE
2" S
IDE
LEG
1" F
RON
TLE
GTORSION SPRING
TORSION SPRING PANEL
48" MAX MAIN TEE SPAN
'A'
'A'
'B'
'B'
24" MAX
PANEL WIDTH
TEE GRID SPECIFICATIONSSEE DETAIL A1.3
SUSPENSION REQUIREMENTSSEE DETAIL A1.2
12" MAX
MAIN TEE OVERHANG
FIXTURE SPECIFICATIONSSEE DETAIL A1.6 AND A1.7
TYPICAL SYSTEM SECTIONSEE DETAIL 'A' AND 'B'
PANEL SPECIFICATIONSSEE DETAIL A1.1
TRIMLESS ACCESSIBILITYSEE DETAIL A1.5
WALL TRIM CONDITIONSSEE DETAIL A1.4
24" MIN - 48" MAX PANEL LENGTH
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.0SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
CIRCLES
MAX WIDTH
TABLE 1 - PERFORATION OPTIONS
MAX LENGTHPERFORATION
CONFETTI
MIDNIGHT STAR
RAIN
WAVES
24" 24"
24"
24"
24"
24"
48"
48"
48"
48"
MATERIAL THICKNESS· TORSION SPRING PLANKS: .040", .050", OR .063" ALUMINUM
PANEL FINISHES· PAINTED & POWDER COATED - INTERIOR· DECORATED WOOD FINISH (POWDER COATED) - INTERIOR· SEE TABLE 1 FOR PERFORATION OPTIONS
INTERIOR INSTALLATION
24" PANEL WIDTH1"
FRO
NT
LEG
12 GA HANGER WIRE, 48" O.C. MAX ALONG LENGTHOF MAIN TEE, TYP., NOT BY HUNTER DOUGLAS
CROSS TEE 48"O.C., TYP.,CENTERED MIDPANEL, BEYOND
TORSION SPRING PANEL DETAIL
MAIN TEE
TORSION SPRING
12 GA HANGER WIRE, 48" O.C. ALONGMAIN TEE, NOT BY HUNTER DOUGLAS
CROSS TEE 48" O.C., TYP.,CENTERED MID PANEL
24" MIN - 48" MAX PANEL LENGTH
2" S
IDE
LEG
TORSION SPRING PANEL DETAIL
MAIN TEE
TORSION SPRING
215 32" S
YSTE
MDE
PTH
221 32" S
YSTE
MDE
PTH
PANEL CONFIGURATIONS:· 24" WIDTHS· 24" AND 48" LENGTHS· OTHER SIZES AVAILABLE, CONTACT CERTAINTEED ARCHITECTURAL
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.1SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
INTERIOR INSTALLATION
SUSPENSION SPECIFICATIONSSCALE: NTS
MAIN TEE 15/16" OR 1-1/2" DRY WALL GRIDPUNCHED 6" O.C.
CROSS TEE 48" O.C., TYP.,CENTERED MID PANEL
PANEL "B"FULLYENGAGED
PANEL "A"FULLY RELEASED
2
1
1
2
1
1
3
3
TORSIONSPRING
48" MAX PANEL LENGTH
24" MAX PANEL WIDTH12 GA HANGER WIRE 48" O.C.
MAX ALONG MAIN TEE
12 GA HANGER WIRE, NOTBY HUNTER DOUGLAS
MAIN TEE
TORSION SPRING
CROSS TEE 48" O.C.,TYP., CENTEREDMID PANEL
TORSION SPRING PANEL
PANEL INSTALLATION ISOMETRICSCALE: NTS
12 GA HANGER WIRE, 48" O.C. MAX ALONGLENGTH OF MAIN TEE, TYP., NOT BYHUNTER DOUGLAS
2" S
IDE
LEG
TORSIONSPRINGPANEL
MAIN TEE DIRECTION
PANEL INSTALLATION:
1. COMPRESS TORSION SPRINGS.
2. PUSH PANEL AND TORSION SPRINGSTHROUGH PUNCHED MAIN TEE HOLES.
3. RELEASE SPRINGS TO HOLD PANEL IN PLACE.
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.2SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
12 GA HANGER WIRE, 48" O.C. ALONGMAIN TEE, NOT BY HUNTER DOUGLAS
CROSS TEE48" O.C., TYP.,CENTEREDMID PANEL
MAIN TEETORSION SPRING
'B'
'B'
'A'
'A'
SECTION 'B'SCALE: 3" = 1'-0"
SECTION 'A'SCALE: 3" = 1'-0"
MAIN TEEINTEGRALSPLICE CLIP
1-1/2"
9/16"
1-11/16"
CROSS TEE HOLE
HANGER WIREHOLE
PUNCHED TORSION SPRING HOLE
BOTTOMVIEW
SECTIONVIEW
1/4" 5/16"
7/32"
SIDEVIEW
8"
6"
INTERIOR INSTALLATION
1-1/2" DRYWALL MAIN TEESCALE: 6" = 1'-0"
15/16" MAIN TEESCALE: 6" = 1'-0"
1/4"
6" TYP.
6" TYP.
CROSS TEEHOLE
1/4"
9/16"
15/16"
5/32"
1/4"
1-21/32"
3/32"
SECTIONVIEW
SIDEVIEW
BOTTOMVIEW
PUNCHED TORSION SPRING HOLEHANGER WIREHOLE
MAIN TEE
12 GA HANGER WIRE,48" O.C. MAX ALONGMAIN TEE, BY OTHERS
MAIN TEE INTEGRALSPLICE CLIP
CROSS TEE 48" O.C. MAX,TYP., CENTERED MID PANEL
CROSS TEE
48" MAX CROSS TEE
SPACING, TYP .
48" MAX 12 GA
HANGER WIRE SPACING, TYP.
CROSS TEE
6" O.C. TORSION SPRING
PUNCHES, TYP.
PUNCHED TORSIONSPRING HOLE
HANGERWIRE HOLE
CROSS TEEHOLE
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.3SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
INTERIOR INSTALLATION
DETAIL 'B'SCALE: 3" = 1'-0"
DETAIL 'A'SCALE: 3" = 1'-0"
10'-0" WALL ANGLE TRIM PART LENGTH
BOX MOLD TRIM
0.025" ALUMINUM
MATERIAL & FINISH
TO MATCH, TYP.
1-3/
4"
1"
1" BOX MOLD,NO HOLD DOWNCLIP REQUIRED
FACTORY TORSIONSPRING PANEL END
'A'
'A'
'B'
'B'
FACTORY TORSIONSPRING PANEL END
1" BOX MOLD,NO HOLD DOWN
CLIP REQUIRED
12 GA HANGER WIRE, 48" O.C. ALONGMAIN TEE, NOT BY HUNTER DOUGLAS
MAIN TEE INBOARDOF PANEL END
TRIM SPRINGAS REQUIREDTO FIT
12 GA HANGER WIRE,48" O.C. ALONG MAIN TEE,NOT BY HUNTER DOUGLAS
12" MAX MAIN TEEOVERHANG, TYP.
NOTE:PANELS ARE INACCESSIBLEFROM BELOW AT PERIMETERTRIMS. PLEASE REFER TODETAIL A1.5 FOR TRIMLESSACCESSIBILITY.
48" MAX CROSS TEE SPACING,
CENTERED MID PANEL, TYP.
MAIN TEE
MAIN TEE
12 GA HANGER WIRE,BY OTHERS
CROSS TEE
FIELD MITER TRIMAT CORNER
CROSS TEE
TORSIONSPRING
24" X 48" TORSIONSPRING PANEL
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.4SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
DETAIL 'B'SCALE: 3" = 1'-0"
FACTORY TORSIONSPRING PANEL END
FACTORY TORSIONSPRING PANEL END
12 GA HANGER WIRE, 48" O.C. ALONGMAIN TEE, NOT BY HUNTER DOUGLAS
MAIN TEE INBOARDOF PANEL END
TRIM SPRINGAS REQUIREDTO FIT
12 GA HANGER WIRE,48" O.C. ALONG MAIN TEE,NOT BY HUNTER DOUGLAS
12" MAX MAIN TEEOVERHANG, TYP.
DETAIL 'A'SCALE: 3" = 1'-0"
'A'
'A'
'B'
'B'
4'-0" MAX CROSS TEE SPACING,
CENTERED MID PANEL, TYP.
DOWNWARDACCESSIBLEPANEL
MAIN TEE
MAIN TEE
12 GA HANGER WIRE,BY OTHERS
CROSS TEE
CROSS TEE
TORSIONSPRING
24" X 48" TORSIONSPRING PANEL
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.5SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
TYPICAL ISOMETRICSCALE: NOT TO SCALE
NOTE:FIXTURE OR DIFFUSER MUST BEINDEPENDENTLY SUPPORTED INACCORDANCE WITH LOCAL BUILDING CODESAND MANUFACTURER'S INSTRUCTIONS
INTERIOR INSTALLATION
48" MAX CLEAR OPENING
'A'
'A'
'B'
'B'
24" MAX CLEAR OPENING,PANEL END TO PANEL END
48" MAX CLEAR OPENING,PANEL END TO PANEL END
24" MAX CLEAR OPENING
SECTION 'B'SCALE: 3" = 1'-0"
SECTION 'A'SCALE: 3" = 1'-0"
FIXTURE INDEPENDENTLYSUPPORTED. SEE NOTE
FIXTURE INDEPENDENTLYSUPPORTED. SEE NOTE
12 GA HANGER WIRE,48" O.C. ALONG MAIN TEE,NOT BY HUNTER DOUGLAS
TORSION SPRING
MAIN TEE
TORSION SPRING
MAIN TEE
FLANGED FIXTUREREQUIRED
FULL FACTORYLENGTH PANEL
FLANGED FIXTUREREQUIRED
FULL FACTORYLENGTH PANEL
MAIN TEE
TORSION SPRING
MAIN TEE
TORSION SPRING
CROSS TEECROSS TEEFULL FACTORYLENGTH PANEL BEYOND
TORSIONSPRING
MAIN TEE
CROSS TEE
24" X 48" TORSIONSPRING PANEL
12 GA HANGER WIRE,BY OTHERS
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.6SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
TYPICAL ISOMETRICSCALE: NOT TO SCALE
INTERIOR INSTALLATION
24" PANEL WIDTH
48" PANEL LENGTH
12" WIDE
36" LONG PANEL OPENING, TYP.
'B'
'B'
'A'
'A'
NOTE:FIXTURE OR DIFFUSER MUST BEINDEPENDENTLY SUPPORTED INACCORDANCE WITH LOCAL BUILDING CODESAND MANUFACTURER'S INSTRUCTIONS
SECTION 'B'SCALE: 3" = 1'-0"
SECTION 'A'SCALE: 3" = 1'-0"
TORSION SPRING
MAIN TEE
12" FIXTUREOPENING
MAIN TEE
TORSION SPRING
24" PANEL WIDTH
36" FIXTUREOPENING
48" PANEL LENGTH
FIXTURE INDEPENDENTLYSUPPORTED. SEE NOTE
FIELD CUT PANEL FOR FIXTURELENGTH, AS REQUIRED
FIELD CUT PANEL FOR FIXTURELENGTH, AS REQUIRED
6" MAX FROMPANEL EDGE
FLANGED FIXTUREREQUIRED
6" MAX FROMPANEL EDGE
12 GA HANGER WIRE, 48" O.C. ALONGMAIN TEE, NOT BY HUNTER DOUGLAS
MAIN TEE
TORSION SPRING
FIXTURE INDEPENDENTLYSUPPORTED. SEE NOTE
TORSION SPRING
MAIN TEE
FULL FACTORYLENGTH PANEL BEYOND
FLANGED FIXTUREREQUIRED
6" MAX
6" MAX
TORSIONSPRING
MAIN TEE
CROSS TEE
24" X 48" TORSIONSPRING PANEL
12 GA HANGER WIRE,BY OTHERS
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.7SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.
LATERAL BRACING: BRACE WITH HANGER WIRES AND STRUTS PER ASTM E-580 AND IN ACCORDANCE WITH LOCAL CODE REQUIREMENTS.
(4) #12 GAUGE WIRES SPLAYED 90° FROM EACH OTHER AT ANGLE NOT EXCEEDING 45° FROMPLANE OF CEILING. A STRUT FASTENED TO MAIN RUNNER SHALL BE EXTENDED TO ANDFASTENED TO STRUCTURE ABOVE. SPLAYED WIRE AND STRUT BRACING TO BE PLACED NOTMORE THAN 12 FEET ON CENTER IN EACH DIRECTION, WITH THE FIRST POINT WITHIN 6 FEETFROM EACH WALL.
INTERIOR INSTALLATION
45° COMPRESSION STRUT
45°
45°
45°
S
N
N
SW
E
SPLAYED 12 GA HANGERWIRE, BY OTHERS, TYP.
SECTION 'A'SCALE: 6" = 1'-0"
'A'
'A'
E
W
1/2" X 1-1/2"16 GA CR CHANNEL,BY OTHERS
#8 X 12 HEX HEADSELF DRILL SCREWS(4 PLACES),BY OTHERS
TORSION SPRING
BAC CLIP
MAIN TEEFACTORY LENGTHTORSION SPRING PANEL
BAC CLIP
TORSIONSPRING
CROSS TEE
MAIN TEE
CROSS TEE
5015 Oakbrook Parkway, Suite 100Norcross, GA 30093O 800 366 4327F 770 806 0214www.certainteed.com/architectural
SPECIFICATIONS(unless noted otherwise)
MATERIAL: .040" │ .050" │.063" ALUMINUMFINISH: PAINT │ POWDER COAT │ DECORATED WOOD FINISH │ LUXACOTE
PERFORATION: SEE DETAIL A1.1, TABLE 1
TITLEPROJECT: TORSION SPRING EXPRESSIONS PRODUCT SPECIFICATIONSDRAWING NUMBER: TSE-A1.8SCALE: AS SHOWNDRAWN BY: MBDATE: 06/2021
These drawings show typical conditions for installing the CertainTeed product shown. They should not be construed as a substitute for anarchitectural or engineering design and do not reflect the unique requirements of local codes, laws, statutes or regulations that may be applicablefor a specific installation. CertainTeed assumes no liability for the accuracy or completeness of the drawings for a specific installation or thefitness of the drawings for a particular purpose. The user is advised to consult with local licensed design professionals in order to assurecompliance with all legal requirements. CertainTeed is not licensed to provide professional engineering or architectural services.