sb21 speci-cations - eaw- eastern acoustic...
TRANSCRIPT
DESCRIPTIONThe high output yet incredibly compact SB2001 dual 21-inch cone driver subwoofer is a recommended companion for all larger format EAW KF Series systems and will likely find a home in many club environments. The SB2001 represents a very noteworthy upgrade to the SB1001/1002 offering in terms of output capability and low frequency extension (17% larger voice coils, 59% greater Xmax, and more than double the volume of air displaced) without much increase in size. The impressive result is a new and more powerful workhorse that has greater impact, power handling and output capability than its celebrated brethren. Just like the SB1001 the unique driver mounting of the SB2001 maximizes cone area and allows for the integration of an extremely low turbulence port while minimizing frontal area, providing the acoustical performance and physical configuration well suited for creating large subwoofer arrays. The enclosure design additionally integrates sixteen 3/8-16 suspension points for installation applications and is fully prepped and ready to receive the user installable quick release rigging kit accessory for touring applications (coming soon). The SB2001 is perfectly suited for a wide range of applications including concert touring, arenas, large houses of worship, large auditoriums, theaters and large dance clubs. As always, optimized processor settings for the UX8800 Digital Signal Processor are available for download at www.eaw.com
FEATURES• 2 x 21 in woofers, vented• Flying Hardware• Portable & Installation
DUAL 21-INCH SUBWOOFERSee NOTES TABULAR DATA for detailsCONFIGURATIONSubsystem: Transducer Loading
SUB 2x 21 in cone Vented
Operating Mode:
Amplifier Channels External Signal Processing
Single-amp LF1 / LF2 DSP w/1-way filter
Dual-amp LF1 / LF2 DSP w/1-way filterPERFORMANCE Operating Range: 20 Hz to 190 Hz
Nominal Beamwidth: Horz 360° Vert 360°
Axial Sensitivity (SPL): LF1/LF2 (whole space) 95 dB 20 Hz to 190 Hz
(half space) 101 dB 20 Hz to 190 Hz
Input Impedance (ohms): Nominal Minimum LF1/LF2 2 2.5 @ 22 Hz
LF1/LF2 4 (each) 5.0 @ 22 Hz
High Pass Filter: High Pass=>20 Hz, 12 dB/octave Butterworth
Accelerated Life Test: System LF1/LF2 85 V 3600 W @ 2 ohm
LF1,LF2 85 V (each) 1800 W @ 4 ohm (each)
Transducer (AES) 1800 W (each)
Calculated Axial Output Limit (whole space SPL): Average Peak LF/LF2 (whole space) 131 dB 137 dB
(half space) 137 dB 143 dB
ORDERING DATA Description Part Number
EAW SB2001 Dual 21-inch Subwoofer Black 2034365
Optional Accessories
Caster Pallet SB2001 [PLT2K1] 2035072
Flybar 2035092
SB2001 Rigging (2 Per) [ACC-R200S] 2035055
SB2001 Caster Kit [ACC-CK200] 255017
SB2001 Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
SEP2014Part Number: RD0508 Rev E00EAW products are continually improved. All specifications are therefore subject to change without notice.
ENCLOSURE Material Exterior-grade Baltic birch plywood Finish Wear resistant textured black paint Grille Powder-coated perforated steel
NOTE: This drawing has been reduced. Do not scale.
SB2001 Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
SEP2014Part Number: RD0508 Rev E00EAW products are continually improved. All specifications are therefore subject to change without notice.
12
34
12
34
ABC
ABC
PR
O E
NG
INE
ER
2033
687-
CD
-B_D
WG
_SB
2001
TH
E IN
FO
RM
AT
ION
CO
NT
AIN
ED
HE
RE
IN IS
PR
OP
RIE
TA
RY
AN
DC
ON
FID
EN
TIA
L P
RO
PE
RT
Y O
FLO
UD
TE
CH
NO
LOG
IES
, IN
C.
ALL
RIG
HT
S R
ES
ER
VE
D
UN
LES
S O
TH
ER
WIS
E S
PE
CIF
IED
:A
LL D
IME
NS
ION
S A
RE
IN IN
CH
ES
DU
AL
[MM
] DIM
EN
SIO
NS
F
OR
RE
F O
NLY
TO
LER
AN
CE
IN IN
CH
ES
LIN
EA
R ±
0.1
3 in
/ ±
3.3
mm
AN
GLE
S ±
1°
(X.X
X)
= R
EF
DIM
SN
O T
OLE
RA
NC
E IM
PLI
ED
TS
C =
TH
EO
RE
TIC
AL
SH
AR
P C
OR
NE
R
DIM
EN
SIO
NS
AC
RO
SS
CE
NT
ER
LIN
ES
TO
BE
SY
MM
ET
RIC
AL
RE
VIS
ION
:D
RA
WIN
G N
UM
BE
R:
TH
IRD
AN
GLE
PR
OJE
CT
ION
TIT
LE:
SC
ALE
:1
1
ww
w.e
aw.c
om
A
A
33.5
0[8
50.9
]
22.6
3[5
74.8
]
29.6
1[7
52.0
]9.
27[2
35.6
]
25.3
9[6
45.0
]
45.0
0[1
143.
0]6.
72[1
70.6
]
7X 1
0.93
[277
.6]
7X 6
.56
[166
.6]
9.27
[235
.6] 25
.39
[645
.0]
6.72
[170
.6]
1.84
[46.
8]
18.8
2[4
78.0
]
9.27
[235
.6]
25.3
9[6
45.0
]
3.93
[99.
8]29
.32
[744
.8]
2X 4
.16
[105
.7]
4.16
[105
.7]
3.75
[95.
3]20.4
0[5
18.1
]45
°
29.6
1[7
52.0
]
21.5
0[5
46.0
]
10.8
3[2
75.0
]6.
57[1
66.9
]
DA
TE
CH
AN
GE
NU
MB
ER
RE
V
2/16
/10
EC
OW
HT
6226
B
2033
687-
CD
B
AS
HE
ET
O
F
0.02
5
DW
G C
US
TO
ME
R S
B20
01[M
EC
HA
NIC
AL
SP
EC
IFIC
AT
ION
]
NO
TE
S:
1. S
YM
BO
L
IND
ICA
TE
S C
EN
TE
R O
F B
ALA
NC
E.
2. S
YM
BO
L
IND
ICA
TE
S P
I AN
GLE
3/8
-16.
3. W
EIG
HT
AP
PR
OX
. 200
lb [9
1 kg
].4.
SH
IPP
ING
WE
IGH
T A
PP
RO
X. 2
32 lb
[105
.5 k
g].
FR
ON
T
TO
P2X R
UN
NE
RR
OU
TS
BO
TT
OM
2X R
UN
NE
RS
RIG
HT
SID
ED
IME
NS
ION
S A
PP
LYT
O B
OT
H S
IDE
S
BA
CK
7X H
AN
DLE
SB
2001
VIE
W A
-AIN
PU
T
10 100 1000 20000
20
10
0
dB re 0.775 V rms -10
-20
-30
-40
10 100 1000 20000
100
Ohm 10
1
PERFORMANCE DATASee NOTES GRAPHIC DATA for details
Frequency Response: UnprocessedLF 1/2 Whole Space = green
Frequency Response: ProcessedLF 1/2 Whole Space = green
Frequency Response: Digital Signal ProcessorLF = green
ImpedanceLF 1/2 = green, LF 1, LF 2 (each) = orange
SPL
(dB)
10 100 1000 20000
120
110
100
dB SPL 90
80
70
60
Frequency (Hz) Frequency (Hz)
SPL
(dB)
dB re
0.7
75 V
rms
10
0
-10
dB SPL -20
-30
-40
-5010 100 1000 20000
Frequency (Hz)
Ohm
s
Frequency (Hz)
SB2001 Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
SEP2014Part Number: RD0508 Rev E00EAW products are continually improved. All specifications are therefore subject to change without notice.
SB2001
NLT4MP NLT4MP
NOTESTABULAR DATA 1. Measurement/Data Processing Systems: Primary - FChart: proprietary EAW software; Secondary - Brüel & Kjær 2012. 2. Microphone Systems: Earthworks M30; Brüel & Kjær 4133 3. Measurements: Dual channel FFT; length: 32 768 samples; sample rate: 48 kHz; logarithmic sine wave sweep. 4. Measurement System Qualification (includes all uncertainties): SPL: accuracy +/-0.2 dB @ 1 kHz, precision +/-0.5 dB 20 Hz to 20 kHz, resolution 0.05 dB; Frequency: accuracy +/-1 %, precision +/-0.1 Hz, resolution the larger of 1.5 Hz or 1/48 octave; Time: accuracy +/-10.4 μs, precision +/-0.5 μs, resolution 10.4 μs; Angular: accuracy +/-1°, precision +/-0.5°, resolution 0.5°. 5. Environment: Measurements time-windowed and processed to eliminate room effects, approximating an anechoic environment. Data processed as anechoic or fractional space, as noted. 6. Measurement Distance: 7.46 m. Acoustic responses represent complex summation of the subsystems at 20 m. SPL is referenced to other distances using the Inverse Square Law. 7. Enclosure Orientation: For beamwidth and polar specifications, as shown in Mechanical Specification drawing. 8. Volts: Measured rms value of the test signal. 9. Watts: Per audio industry practice, “loudspeaker watts” are calculated as voltage squared divided by rated nominal impedance. Thus, these are not True Watt units of energy as defined by International Standard. 10. SPL: (Sound Pressure Level) Equivalent to the average level of a signal referenced to 0 dB SPL = 20 microPascals. 11. Subsystem: This lists the transducer(s) and their acoustic loading for each passband. Sub = Subwoofer, LF = Low Frequency, MF = Mid Frequency, HF = High Frequency. 12. Operating Mode: User selectable configurations. Between system elements, a comma (,) = separate amplifier channels; a slash (/) = single amplifier channel. DSP = Digital Signal Processor. IMPORTANT: To achieve the specified performance, the listed external signal processing must be used with EAW-provided settings. 13. Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the geometric axis. Narrow band dips are excepted. 14. Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level. 15. Axial Sensitivity: Power averaged SPL over the Operating Range with an input voltage that would produce 1 W at the nominal impedance; measured with no external processing on the geometric axis, referenced to 1 m. 16. Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the Operating Range. 17. Accelerated Life Test: Maximum test input voltage applied with an EIA-426B defined spectrum; measured with recommended signal processing and Recommended Protection Filter. 18. Calculated Axial Output Limit: Highest average and peak SPLs possible during the Accelerated Life Test. The Peak SPL represents the 2:1 (6 dB) crest factor of the Life Test signal. 19. High Pass Filter: This helps protect the loudspeaker from excessive input signal levels at frequencies below the Operating Range.
GRAPHIC DATA 1. Resolution: To remove insignificant fine details, 1/12 octave cepstral smoothing was applied to acoustic frequency responses and 1/3 octave cepstral smoothing was applied to the beamwidth and impedance data. Other graphs are plotted using raw data. 2. Frequency Responses: Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance), 2.83 V (8 ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m. 3. Processor Response: The variation in output level with frequency for a constant input signal of 0.775 V = 0 dB reference. 4. Beamwidth: Average angle for each 1/3 octave frequency band where, starting from the rear of the loudspeaker, the output first reaches -6 dB SPL referenced to 0 dB SPL as the highest level. This method means the output may drop below -6 dB SPL within the beamwidth angle. 5. Impedance: Variation in impedance magnitude, in ohms, with frequency without regard to voltage/current phase. This means the impedance values may not be used to calculate True Watts (see 9 above). 6. Polar Data: Horizontal and vertical polar responses for each 1/3 octave frequency band 100 Hz to 16 kHz or Operating Range.
INPUT PANEL SIGNAL DIAGRAM
LEGENDDSP: User-supplied Digital Signal Processor.HPF: High Pass Filter for crossover or specified High Pass Filter.LPF: Low Pass Filter for crossover.LF/MF/HF: Low Frequency / Mid Frequency / High Frequency.AMP: User-supplied Power Amplifier.XVR: Passive LPFs, HPFs and EQ integral to the loudspeaker.
SB2001 Specifications
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com
SEP2014Part Number: RD0508 Rev E00EAW products are continually improved. All specifications are therefore subject to change without notice.