sar test report - cubot mobile · the comosar system uses the kuka robot from satimo sa...
TRANSCRIPT
Page 1 of 337
SAR Test Report
Report No.: AGC00377150606EH01
PRODUCT DESIGNATION : GSM /WCDMA/FDD-LTE Mobile Phone
BRAND NAME : CUBOT
MODEL NAME : X15
CLIENT : Shenzhen Huafurui Technology Co., Ltd.
DATE OF ISSUE : July 24,2015
STANDARD(S) : EN 50360:2001+A1:2012; EN 62209-1: 2006; IEC 62209-1: 2005; IEC 62209-2:2010; EN 62209-2:2010; EN 50566:2013
REPORT VERSION : V1.0
Attestation of Global Compliance(Shenzhen) Co., Ltd.
CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.
Report No.:AGC00377150606EH01 Page 2 of 337
Report Revise Record
Report Version Revise Time Issued Date Valid Version Notes
V1.0 / July 24,2015 Valid Original Report
Report No.:AGC00377150606EH01 Page 3 of 337
Test Report Certification Applicant Name Shenzhen Huafurui Technology Co., Ltd.
Applicant Address Room 07B, Tower A, Modern Window Building, Huaqiang North Road, Futian District, Shenzhen, P.R. China
Manufacturer Name Shenzhen Huafurui Technology Co., Ltd.
Manufacturer Address Room 07B, Tower A, Modern Window Building, Huaqiang North Road, Futian District, Shenzhen, P.R. China
Product Designation GSM /WCDMA/FDD-LTE Mobile Phone
Brand Name CUBOT
Model Name X15
Different Description N/A
EUT Voltage DC3.8V by battery
Applicable Standard EN 50360:2001+A1:2012; EN 62209-1: 2006; IEC 62209-1: 2005;
IEC 62209-2:2010; EN 62209-2:2010; EN 50566:2013
Test Date July 02,2015 to July 23,2015
Performed Location Attestation of Global Compliance(Shenzhen) Co., Ltd.
2 F, Building 2, No.1-No.4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang Street, Bao'an District, Shenzhen, China
Report Template AGCRT-EC-4G/SAR (2015-05-01)
Tested By
Summer Li July 24,2015
Checked By
Angela Li July 24,2015
Authorized By
Solger Zhang July 24,2015
Report No.:AGC00377150606EH01 Page 4 of 337
TABLE OF CONTENTS
1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5
2. GENERAL INFORMATION ............................................................................................................................ 6
2.1. EUT DESCRIPTION ...................................................................................................................................... 6
3. SAR MEASUREMENT SYSTEM ..................................................................................................................... 8
3.1. THE SATIMO SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................. 8 3.2. COMOSAR E-FIELD PROBE ....................................................................................................................... 9 3.3. ROBOT ....................................................................................................................................................... 9 3.4. VIDEO POSITIONING SYSTEM ..................................................................................................................... 10 3.5. DEVICE HOLDER ....................................................................................................................................... 10 3.6. SAM TWIN PHANTOM ................................................................................................................................. 11
4. SAR MEASUREMENT PROCEDURE ........................................................................................................... 12
4.1. SPECIFIC ABSORPTION RATE (SAR) ........................................................................................................... 12 4.2. SAR MEASUREMENT PROCEDURE ............................................................................................................. 13
5. TISSUE SIMULATING LIQUID ...................................................................................................................... 14
5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID ................................................................................... 14 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS .............................................................. 14 5.3. TISSUE CALIBRATION RESULT ..................................................................................................................... 15
6. SAR SYSTEM CHECK PROCEDURE ......................................................................................................... 16
6.1. SAR SYSTEM CHECK PROCEDURES ........................................................................................................... 16 6.2. SAR SYSTEM CHECK ................................................................................................................................ 17
7. EUT TEST POSITION ................................................................................................................................... 18
7.1. DEFINE TWO IMAGINARY LINES ON THE HANDSET ......................................................................................... 18 7.2. CHEEK POSITION ...................................................................................................................................... 19 7.3. TITLE POSITION ........................................................................................................................................ 19 7.4. BODY WORN POSITION .............................................................................................................................. 20
8. SAR EXPOSURE LIMITS ............................................................................................................................ 21
9. TEST EQUIPMENT LIST ............................................................................................................................. 22
10. MEASUREMENT UNCERTAINTY .............................................................................................................. 23
11. CONDUCTED POWER MEASUREMENT .................................................................................................. 25
12. TEST RESULTS ........................................................................................................................................ 41
12.1. SAR TEST RESULTS SUMMARY ................................................................................................................ 41
APPENDIX A. SAR SYSTEM CHECK DATA ................................................................................................... 51
APPENDIX B. SAR MEASUREMENT DATA.................................................................................................... 65
APPENDIX C. TEST SETUP PHOTOGRAPHS &EUT PHOTOGRAPHS ...................................................... 337
APPENDIX D. CALIBRATION DATA ............................................................................................................. 337
Report No.:AGC00377150606EH01 Page 5 of 337
1. SUMMARY OF MAXIMUM SAR VALUE The maximum results of Specific Absorption Rate (SAR) found during testing for EUT are as follows:
Frequency Band Highest Reported 10g-SAR(W/Kg)
Head Body-worn(with 15mm separation)
GSM 900 0.205 0.186
DCS 1800 0.203 0.187
WCDMA Band I 0.890 1.241
WCDMA Band VIII 0.203 0.204
LTE Band I 0.571 0.782
LTE Band III 0.185 0.326
LTE Band VII 0.520 0.543
LTE Band XX 0.157 0.144
This device is compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (2.0W/Kg).
Report No.:AGC00377150606EH01 Page 6 of 337
2. GENERAL INFORMATION
2.1. EUT Description
General Information
Product Designation GSM /WCDMA/FDD-LTE Mobile Phone
Test Model X15
Hardware Version N366BS_MB_V1.0
Software Version N/A
Device Category Portable
RF Exposure Environment Uncontrolled
Antenna Type Internal
GSM and GPRS&EGPRS
Support Band GSM 850 GSM 900 DCS 1800 PCS 1900
GPRS & EGPRS Type Class B
GPRS & EGPRS Class Class 12(1Tx+4Rx, 2Tx+3Rx, 3Tx+2Rx, 4Tx+1Rx)
TX Frequency Range GSM900:880-915MHz ; DCS1800:1710-1785MHz
RX Frequency Range GSM900:925-960MHz ; DCS1800:1805-1880MHz
Release Version R99
Type of modulation GMSK for GSM/GPRS; GMSK & 8-PSK for EGPRS
Antenna Gain 1.0dBi
Max. Average Power (Max. Peak Power)
GSM900: 31.70dBm (32.63dBm); DCS1800: 28.57dBm (29.56dBm)
WCDMA
Support Band UMTS FDD Band I UMTS FDD Band VIII UMTS FDD Band II UMTS FDD Band V
HS Type HSPA(HSUPA/HSDPA)
TX Frequency Range WCDMA FDD Band I: 1920-1980MHz ;WCDMA FDD Band VIII: 880-915MHz
RX Frequency Range WCDMA FDD Band I: 2110-2170MHz ;WCDMA FDD Band VIII: 925-960MHz
Release Version Rel-6
Type of modulation HSDPA:QPSK/16QAM; HSUPA:BPSK; WCDMA:QPSK
Antenna Gain 1.0dBi
Max. Average Power (Max. Peak Power)
Band I: 23.66dBm (23.75dBm) Band VIII: 23.52dBm (23.75dBm)
Report No.:AGC00377150606EH01 Page 7 of 337
EUT Description( Continue)
Bluetooth
Bluetooth Version V2.0 V2.1 V2.1+EDR V3.0 V3.0+HS V4.0
Operation Frequency 2402~2480MHz
Type of modulation GFSK ∏/4-DQPSK 8-DPSK
Avg. Burst Power 2.78dBm
Antenna Gain 0.8dBi
LTE
Support Band Band I Band III Band VII Band VIII Band XX
TX Frequency Range Band I:1920-1980 MHz; Band III: 1710-1785 MHz; Band VII:2500-2570MHz Band VIII:880-915 MHz; Band XX:832-862 MHz
RX Frequency Range Band I:2110-2170 MHz; Band III: 1805-1880 MHz; Band VII:2620-2690MHz Band VIII: 925-960 MHz; Band XX: 791-821 MHz
Release Version Rel-8
Type of modulation QPSK,16QAM
Antenna Gain 1.0dBi(Band I),1.0dBi(Band III), 0.8dBi(Band VII), 1.5dBi(Band XX)
Max. Average Power Band I: 22.62dBm, Band III: 22.62dBm , Band VII:22.57dBm; Band XX:22.77dBm;
WIFI
WIFI Specification 802.11a 802.11b 802.11g 802.11n(20) 802.11n(40)
Operation Frequency 2412~2472MHz
Avg. Burst Power 11b:6.93dBm,11g:2.50dBm,11n(20):2.67dBm,11n(40):1.91dBm
Antenna Gain 0.8dBi
Li-ion Battery
Brand Name CUBOT
Model Name X15
Capacitance 2500mAh
Rated Voltage DC3.8V
Charging Voltage DC4.35V
Note: The sample used for testing is end product.
Report No.:AGC00377150606EH01 Page 8 of 337
3. SAR MEASUREMENT SYSTEM
3.1. The SATIMO system used for performing compliance tests consists of following items
The COMOSAR system for performing compliance tests consists of the following items:
· The PC. It controls most of the bench devices and stores measurement data.A computer running WinXP and
the Opensar software.
· The E-Field probe. The probe is a 3-axis system made of 3 distinct dipoles. Each dipole returns a voltage in
function of the ambient electric field.
· The Keithley multimeter measures each probe dipole voltages.
· The SAM phantom simulates a human head. The measurement of the electric field is made inside the
phantom.
· The liquids simulate the dielectric properties of the human head tissues.
· The network emulator controls the mobile phone under test.
· The validation dipoles are used to measure a reference SAR. They are used to periodically check the bench to
make sure that there is no drift of the system characteristics over time.
·The phantom, the device holder and other accessories according to the targeted measurement.
Report No.:AGC00377150606EH01 Page 9 of 337
3.2. COMOSAR E-Field Probe
The SAR measurement is conducted with the dosimetric probe manufactured by SATIMO. The probe is specially designed and calibrated for use in liquid with high permittivity. The dosimetric probe has special calibration in liquid at different frequency. SATIMO conducts the probe calibration in compliance with international and national standards (e.g. IEEE 1528, EN62209, IEC 62209, etc.)Under ISO17025.The calibration data are in Appendix D.
Isotropic E-Field Probe Specification
Model SSE5
Manufacture SATIMO
Frequency 0.3GHz-3GHz Linearity:±0.09dB(300MHz-3GHz)
Dynamic Range 0.01W/Kg-100W/Kg Linearity:±0.09dB
Dimensions
Overall length:330mm Length of individual dipoles:4.5mm Maximum external diameter:8mm Probe Tip external diameter:5mm Distance between dipoles/ probe extremity:2.7mm
Application
High precision dosimetric measurements in any exposure scenario (e.g., very strong gradient fields). Only probe which enables compliance testing for frequencies up to 3 GHz with precision of better 30%.
3.3. Robot The COMOSAR system uses the KUKA robot from SATIMO SA (France).For the 6-axis controller COMOSAR system, the KUKA robot controller version from SATIMO is used. The XL robot series have many features that are important for our application: � High precision (repeatability 0.02 mm) � High reliability (industrial design) � Jerk-free straight movements � Low ELF interference (the closed metallic construction shields against motor control fields) � 6-axis controller
Report No.:AGC00377150606EH01 Page 10 of 337
3.4. Video Positioning System
The video positioning system is used in OpenSAR to check the probe. Which is composed of a camera, LED, mirror and mechanical parts.The camera is piloted by the main computer with firewire link. During the process, the actual position of the probe tip with respect to the robot arm is measured, as well as the probe length and the horizontal probe offset. The software then corrects all movements, such that the robot coordinates are valid for the probe tip. The repeatability of this process is better than 0.1 mm. If a position has been taught with an aligned probe, the same position will be reached with another aligned probe within 0.1 mm, even if the other probe has different dimensions. During probe rotations, the probe tip will keep its actual position.
3.5. Device Holder The COMOSAR device holder is designed to cope with different positions given in the standard. It has two scales for the device rotation (with respect to the body axis) and the device inclination (with respect to the line between the ear reference points). The rotation center for both scales is the ear reference point (EPR). Thus the device needs no repositioning when changing the angles. The COMOSAR device holder has been made out of low-loss POM material having the following dielectric parameters: relative permittivity εr =3 and loss tangent δ = 0.02. The amount of dielectric material has been reduced in the closest vicinity of the device, since measurements have suggested that the influence of the clamp on the test results could thus be lowered.
Report No.:AGC00377150606EH01 Page 11 of 337
3.6. SAM Twin Phantom
The SAM twin phantom is a fiberglass shell phantom with 2mm shell thickness (except the ear region where shell thickness increases to 6mm). It has three measurement areas: � Left head � Right head � Flat phantom
The bottom plate contains three pair of bolts for locking the device holder. The device holder positions are adjusted to the standard measurement positions in the three sections. A white cover is provided to tap the phantom during off-periods to prevent water evaporation and changes in the liquid parameters. On the phantom top, three reference markers are provided to identify the phantom position with respect to the robot.
Report No.:AGC00377150606EH01 Page 12 of 337
4. SAR MEASUREMENT PROCEDURE
4.1. Specific Absorption Rate (SAR)
SAR is related to the rate at which energy is absorbed per unit mass in object exposed to a radio field. The SAR distribution in a biological body is complicated and is usually carried out by experimental techniques or numerical modeling. The standard recommends limits for two tiers of groups, occupational/controlled and occupational/uncontrolled, based on a person’s awareness and ability to exercise control over his or her exposure. In general, occupational/controlled exposure limits are higher than the limits for general population/uncontrolled.
The SAR definition is the time derivative (rate) of the incremental energy (dW) absorbed by (dissipated in) an incremental mass (dm) contained in a volume element(dv) of given mass density (ρ). The equation description is as below:
SAR is expressed in units of Watts per kilogram (W/Kg) SAR can be obtained using either of the following equations:
Where SAR is the specific absorption rate in watts per kilogram;
E is the r.m.s. value of the electric field strength in the tissue in volts per meter; ζ is the conductivity of the tissue in siemens per metre;
ρ is the density of the tissue in kilograms per cubic metre; ch is the heat capacity of the tissue in joules per kilogram and Kelvin;
dT
dt│t = 0 is the initial time derivative of temperature in the tissue in kelvins per second
Report No.:AGC00377150606EH01 Page 13 of 337
4.2. SAR Measurement Procedure
Step 1: Power Reference Measurement
The Power Reference Measurement and Power Drift Measurement are for monitoring the power drift of the device under test in the batch process. The minimum distance of probe sensors to surface is 2.7mm This distance cannot be smaller than the distance os sensor calibration points to probe tip as `defined in the probe properties,
Step 2: Area Scan
The Area Scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine measurement around the hot spot. The sophisticated interpolation routines implemented in SATIMO software can find the maximum locations even in relatively coarse grids. When an Area Scan has measured all reachable points, it computes the field maximal found in the scanned area, within a range of the global maximum. The range (in db) is specified in the standards for compliance testing. For example, a 2db range is required in IEEE Standard 1528 and IEC62209 standards, whereby 3db is a requirement when compliance is assessed in accordance with the ARIB standard (Japan) If one Zoom Scan follows the Area Scan, then only the absolute maximum will be taken as reference. For cases where multiple maximum are detected, the number of Zoom Scan has to be increased accordingly.
measure the SAR distribution within the phantom (area scan procedure). The SAR distribution is scanned along the inside surface of one side of the phantom head, at least for an area larger than the projection of the handset and antenna. The spatial grid step shall be less than 20 mm. The resolution accuracy can also be tested using the reference functions of 7.2.4. If surface scanning is used, then the distance between the geometrical centre of the probe dipoles and the inner surface of the phantom shall be 8,0 mm or less (±1,0 mm). At all measurement points, the angle of the probe with respect to the line normal to the surface is recommended but not required to be less than 30°.
Step 3: Zoom Scan
Zoom Scan are used to assess the peak spatial SAR value within a cubic average volume containing 1g abd 10g of simulated tissue. The Zoom Scan measures points(refer to table below) within a cube whose base faces are centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done, the Zoom Scan evaluates the averaged SAR for 1g and 10g and displays these values next to the job’s label.
measure SAR with a grid step of 8 mm or less in a volume with a minimum size of 30 mm by 30 mm and 30 mm in depth (zoom scan procedure). The grid step in the vertical direction shall be 5 mm or less (see C.3.3). Separate grids shall be centred on each of the local SAR maxima found in step c). Step 4: Power Drift Measurement
The Power Drift Measurement measures the field at the same location as the most recent power reference measurement within the same procedure, and with the same settings. The Power Drift Measurement gives the field difference in dB from the reading conducted within the same settings. This allows a user to monitor the power drift of the device under test within a batch process. The measurement procedure is the same as Step 1.
Report No.:AGC00377150606EH01 Page 14 of 337
5. TISSUE SIMULATING LIQUID
For SAR measurement of the field distribution inside the phantom, the phantom must be filled with homogeneous tissue simulating liquid to a depth of at least 15cm. For head SAR testing the liquid height from the ear reference point (ERP) of the phantom to the liquid top surface is larger than 15cm For body SAR testing, the liquid height from the center of the flat phantom to the liquid top surface is larger than 15cm.The nominal dielectric values of the tissue simulating liquids in the phantom and the tolerance of 5% are listed in 5.3
5.1. The composition of the tissue simulating liquid
Ingredient Water Salt Sugar HEC Preventol DGBE 1,2-Propanediol Triton X-100
835MHz √ √ √ √ √ -- -- --
900MHz √ √ -- -- -- -- √ --
1800MHz √ √ -- -- -- √ -- √
2000MHz √ √ -- -- -- √ -- √
2600MHz √ √ -- -- -- √ -- --
5.2. Tissue Dielectric Parameters for Head and Body Phantoms
The head tissue dielectric parameters recommended by the EN62209-1 have been incorporated in the following table.The body tissue dielectric parameters recommended by the EN62209-2 have been incorporated in the following table.
Target Frequency (MHz)
head body
εr σ (S/m) εr σ (S/m)
300 45.3 0.87 45.3 0.87
450 43.5 0.87 43.5 0.87
835 41.5 0.90 41.5 0.90
900 41.5 0.97 41.5 0.97
1450 40.5 1.20 40.5 1.20
1800 – 2000 40.0 1.40 40.0 1.40
2450 39.2 1.80 39.2 1.80
2600 39.00 1.96 39.00 1.96
3000 38.5 2.40 38.5 2.40
(εr = relative permittivity, ζ = conductivity and ρ = 1000 kg/m3)
Report No.:AGC00377150606EH01 Page 15 of 337
5.3. Tissue Calibration Result
The dielectric parameters of the liquids were verified prior to the SAR evaluation using SATIMO Dielectric Probe Kit and R&S Network Analyzer ZVL6.
Frequency (MHz)
Target Value Measurement Value Tissue Temp [oC]
Test Date εr δ[s/m] εr δ[s/m]
835 41.5
39.425-43.575 0.90
0.855-0.945 42.15 0.89 21.9 July 21,2015
900 41.50
39.425-43.575 0.97
0.9225-1.0185 42.03 0.96 22.0 July 03,2015
1800 40.00
38.00-42.00 1.40
1.33-1.47 40.08 1.41 21.2 July 02,2015
2000 40.00
38.00-42.00 1.40
1.33-1.47 39.79 1.38 21.6 July 04,2015
1800 40.00
38.00-42.00 1.40
1.33-1.47 40.47 1.42 21.6 July 20,2015
2000 40.00
38.00-42.00 1.40
1.33-1.47 41.17 1.38 21.5 July 22,2015
2600 39.0
37.05-40.95 1.96
1.86-2.06 39.77 1.90 21.3 July 23,2015
Report No.:AGC00377150606EH01 Page 16 of 337
6. SAR SYSTEM CHECK PROCEDURE
6.1. SAR System Check Procedures SAR system check is required to confirm measurement accuracy, according to the tissue dielectric media, probe calibration points and other system operating parameters required for measuring the SAR of a test device. The system verification must be performed for each frequency band and within the valid range of each probe calibration point required for testing the device. The same SAR probe(s) and tissue-equivalent media combinations used with each specific SAR system for system verification must be used for device testing. When multiple probe calibration points are required to cover substantially large transmission bands, independent system verifications are required for each probe calibration point. A system verification must be performed before each series of SAR measurements using the same probe calibration point and tissue-equivalent medium. Additional system verification should be considered according to the conditions of the tissue-equivalent medium and measured tissue dielectric parameters, typically every three to four days when the liquid parameters are remeasured or sooner when marginal liquid parameters are used at the beginning of a series of measurements.
Each SATIMO system is equipped with one or more system check kits. These units, together with the predefined measurement procedures within the SATIMO software, enable the user to conduct the system check and system validation. System kit includes a dipole, and dipole device holder.
The system check verifies that the system operates within its specifications. It’s performed daily or before every SAR measurement. The system check uses normal SAR measurement in the flat section of the phantom with a matched dipole at a specified distance. The system check setup is shown as below.
Report No.:AGC00377150606EH01 Page 17 of 337
6.2. SAR System Check 6.2.1. Dipoles
The dipoles used is based on the EN62209-1/2 standard, the table below provides details for the mechanical and electrical Specifications for the dipoles.
Frequency L (mm) h (mm) d (mm)
835MHz 161.0 89.8 3.6
900MHz 149.0 83.3 3.6
1800MHz 71.6 41.7 3.6
2000MHz 64.5 37.5 3.6
2600MHz 48.5 28.8 3.6
6.2.2. System Check Result
System Performance Check at 835MHz & 900 MHz &1800MHz & 2000MHz & 2600MHz for Head
Validation Kit:SN 46/11 DIP 0G835-190 & SN 46/11DIP 0G900-185 & SN 46/11DIP 1G800-186 & SN 46/11DIP 2G000-188 & SN 47/14 DIP 2G600-342
Frequency [MHz]
Target Value(W/Kg)
Reference Result (± 10%)
Tested Value(W/Kg)
Tissue Temp.
[°C] Test time
1g 10g 1g 10g 1g 10g
835 9.60 6.20 8.64-10.56 5.58-6.82 10.081 6.425 21.9 July 21,2015
900 10.70 6.72 9.63-11.77 6.048-7.392 10.575 6.803 22.0 July 03,2015
1800 38.17 19.98 34.353-41.987 17.982-21.987 38.566 19.880 21.2 July 02,2015
2000 42.10 20.52 37.89-46.31 18.468-22.572 40.778 19.868 21.6 July 04,2015
1800 38.17 19.98 34.353-41.987 17.982-21.987 39.173 21.817 21.6 July 20,2015
2000 42.10 20.52 37.89-46.31 18.468-22.572 41.761 22.306 21.5 July 22,2015
2600 55.48 24.49 49.932-61.028 22.041-26.939 51.986 25.796 21.3 July 23,2015
Report No.:AGC00377150606EH01 Page 18 of 337
7. EUT TEST POSITION
This EUT was tested in Right Cheek, Right Titled, Left Cheek, Left Titled, Body back and Body front.
7.1. Define Two Imaginary Lines on the Handset
(1)The vertical centerline passes through two points on the front side of the handset the midpoint of the width wt of the handset at the level of the acoustic output, and the midpoint of the width wb of the handset.
(2)The horizontal line is perpendicular to the vertical centerline and passes through the center of the acoustic output. The horizontal line is also tangential to the face of the handset at point A.
(3)The two lines intersect at point A. Note that for many handsets, point A coincides with the center of the acoustic output; however, the acoustic output may be located elsewhere on the horizontal line. Also note that the vertical centerline is not necessarily to the front face of the handset, especially for clamshell handsets, handsets with flip covers, and other irregularly shaped handsets.
Report No.:AGC00377150606EH01 Page 19 of 337
7.2. Cheek Position
(1) To position the device with the vertical center line of the body of the device and the horizontal line crossing the center picec in a plane parallel to the sagittal plane of the phantom. While maintaining the device in this plane, align the vertical center line with the reference plane containing the ear and mouth reference point (M: Mouth, RE: Right Ear, and LE: Left Ear) and align the center of the ear piece with the line RE-LE.
(2) To move the device towards the phantom with the ear piece aligned with the the line LE-RE until the phone touched the ear. While maintaining the device in the reference plane and maintaining the phone contact with ear, move the bottom of the phone until any point on the front side is in contact with the cheek of the phantom or until contact with the ear is lost
7.3. Title Position
(1) To position the device in the “cheek” position described above.
(2) While maintaining the device in the reference plane described above and pivoting against the ear, moves it outward away from the mouth by an angle of 15 degrees or until with the ear is lost.
Report No.:AGC00377150606EH01 Page 20 of 337
7.4. Body Worn Position
(1) To position the EUT parallel to the phantom surface.
(2) To adjust the EUT parallel to the flat phantom.
(3) To adjust the distance between the EUT surface and the flat phantom to 15mm.
Report No.:AGC00377150606EH01 Page 21 of 337
8. SAR EXPOSURE LIMITS
SAR assessments have been made in line with the requirements of 1999/519/EC of 12 July 1999 on the limitation of exposure of the general public electromagnetic fields (0 Hz-300GHz).
Limits for General Population/Uncontrolled Exposure (W/kg)
Type Exposure Uncontrolled Environment Limit (W/kg)
Spatial Peak SAR (10 g cube tissue for brain or body) 2.00
Spatial Average SAR (Whole body) 0.08
Spatial Peak SAR (Limbs) 4.00
Report No.:AGC00377150606EH01 Page 22 of 337
9. TEST EQUIPMENT LIST Equipment description
Manufacturer/ Model
Identification No. Current calibration
date Next calibration
date
SAR Probe SATIMO SN 22/12 EP159 12/03/2014 12/02/2015
SAR Probe SATIMO SN 04/13 EP165 12/03/2014 12/02/2015
TISSUE Probe SATIMO SN 45/11 OCPG45 12/03/2014 12/02/2015
Phantom SATIMO SN_4511_SAM90 Validated. No cal
required. Validated. No cal
required.
Liquid SATIMO - Validated. No cal
required. Validated. No cal
required.
Comm Tester R&S - CMU200 069Y7-158-13-712 03/06/2015 03/05/2016
Comm Tester Agilent-8960 GB46310822 03/06/2015 03/05/2016
Comm Tester R&S- CMW500 S/N120909 10/21/2014 10/20/2015
Multimeter Keithley 2000 1188656 03/06/2015 03/05/2016
Dipole SATIMO SID835 SN46/11 DIP 0G835-190
10/02/2014 10/01/2017
Dipole SATIMO SID900 SN46/11 DIP 0G900-185
11/14/2013 11/13/2016
Dipole SATIMO SID1800 SN46/11 DIP 1G800-186
11/14/2013 11/13/2016
Dipole SATIMO SID2000 SN46/11 DIP 2G000-188
11/14/2013 11/13/2016
Dipole SATIMO SID2600 SN47/14 DIP 2G600-342
12/03/2014 12/02/2017
Signal Generator Agilent-E4438C MY44260051 03/06/2015 03/05/2016
Power Sensor NRP-Z23 US38261498 03/06/2015 03/05/2016
Spectrum Analyzer E4440
Agilent US41421290 07/25/2014 07/24/2015
Network Analyzer Rhode & Schwarz
ZVL6 SN100132 03/06/2015 03/05/2016
Attenuator Warison
/WATT-6SR1211 N/A N/A N/A
Attenuator Mini-circuits /
VAT-10+ N/A N/A N/A
Amplifier EM30180 SN060552 03/06/2015 03/05/2016
Directional Couple
Werlatone/ C5571-10
SN99463 07/30/2014 07/29/2015
Directional Couple
Werlatone/ C6026-10
SN99482 07/30/2014 07/29/2015
Power Sensor NRP-Z21 1137.6000.02 10/22/2014 10/21/2015
Power Viewer R&S V2.3.1.0 N/A N/A
Note: Per KDB 865664 Dipole SAR Validation, AGC Lab has adopted 3 years calibration intervals. On annual basis, every measurement dipole has been evaluated and is in compliance with the following criteria: 1. There is no physical damage on the dipole; 2. System validation with specific dipole is within 10% of calibrated value; 3. Return-loss is within 20% of calibrated measurement; 4. Impedance is within 5Ω of calibrated measurement.
Report No.:AGC00377150606EH01 Page 23 of 337
10. MEASUREMENT UNCERTAINTY
SATIMO Uncertainty Measurement uncertainty for 300 MHz to 3 GHz averaged over 1 gram / 10 gram.
Uncertainty Component Sec. Tol (+- %)
Prob. Dist.
Div. Ci (1g) Ci (10g) 1g Ui (+-%)
10g Ui (+-%)
Vi
Measurement System
Probe calibration E.2.1 7.0 N 1 1 1 6.98 6.98 ∞
Axial Isotropy E.2.2 2.5 R 3 1 1 1.16 1.16 ∞
Hemispherical Isotropy E.2.2 4.0 R 3 1 1 2.33 2.33 ∞
Boundary effect E.2.3 1.0 R 3 1 1 0.58 0.58 ∞
Linearity E.2.4 5.0 R 3 1 1 2.87 2.87 ∞
System detection limits E.2.5 1.0 R 3 1 1 0.58 0.58 ∞
Readout Electronics E.2.6 0.02 N 1 1 1 0.03 0.03 ∞
Response Time E.2.7 3.0 R 3 1 1 1.70 1.70 ∞
Integration Time E.2.8 2.0 R 3 1 1 1.16 1.16 ∞
RF ambient Conditions E.6.1 3.0 R 3 1 1 1.71 1.71 ∞
Probe positioner Mechanical Tolerance
E.6.2 2.0 R 3 1 1 1.15 1.15 ∞
Probe positioning with respect to Phantom Shell
E.6.3 0.05 R 3 1 1 0.03 0.03 ∞
Extrapolation, interpolation and integration Algoritms for
Max. SAR Evaluation E.5.2 5.0 R 3 1 1 2.91 2.91 ∞
Test sample Related
Test sample positioning E.4.2.1 0.03 N 1 1 1 0.05 0.05 N-1
Device Holder Uncertainty E.4.1.1 5.00 N 1 1 1 4.95 4.95 ∞
Output power Variation - SAR drift measurement
6.6.2 0.65 R 3 1 1 0.36 0.36 ∞
Phantom and Tissue Parameters
Phantom Uncertainty (Shape and thickness
tolerances) E.3.1 0.05 R 3 1 1 0.02 0.02 ∞
Liquid conductivity deviation from target value
E.3.2 5.00 R 3 0.64 0.43 1.83 1.23 ∞
Liquid conductivity - measurement uncertainty
E.3.3 5.00 N 1 0.64 0.43 3.18 2.14 ∞
Liquid permittivity - deviation from target value
E.3.2 0.03 R 3 0.6 0.49 0.01 0.01 ∞
Liquid permittivity - measurement uncertainty
E.3.3 10.00 N 1 0.6 0.49 6.06 4.95 M
Combined Standard Uncertainty
RSS 11.17 10.63 ∞
Expanded Uncertainty (95% Confidence interval)
k 22.34 21.26
Report No.:AGC00377150606EH01 Page 24 of 337
SATIMO Uncertainty System uncertainty for 300 MHz to 3 GHz averaged over 1 gram / 10 gram.
Uncertainty Component Sec. Tol
(+- %) Prob. Dist.
Div. Ci (1g) Ci (10g) 1g Ui (+-%)
10g Ui (+-%)
Vi
Measurement System
Probe calibration E.2.1 7.0 N 1 1 1 6.98 6.98 ∞
Axial Isotropy E.2.2 2.5 R 3 1 1 1.16 1.16 ∞
Hemispherical Isotropy E.2.2 4.0 R 3 1 1 2.33 2.33 ∞
Boundary Effects E.2.3 1.0 R 3 1 1 0.58 0.58 ∞
Linearity E.2.4 5.0 R 3 1 1 2.87 2.87 ∞
System detection limits E.2.5 1.0 R 3 1 1 0.58 0.58 ∞
Readout Electronics E.2.6 0.02 N 1 1 1 0.03 0.03 ∞
Response Time E.2.7 3.0 R 3 1 1 1.70 1.70 ∞
Integration Time E.2.8 2.0 R 3 1 1 1.16 1.16 ∞
RF ambient Conditions E.6.1 3.0 R 3 1 1 1.71 1.71 ∞
Probe positioner Mechanical Tolerance
E.6.2 2.0 R 3 1 1 1.15 1.15 ∞
Probe positioning with respect to Phantom Shell
E.6.3 0.05 R 3 1 1 0.03 0.03 ∞
Extrapolation, interpolation and integration Algoritms for
Max. SAR Evaluation E.5.2 5.0 R 3 1 1 2.91 2.91 ∞
Dipole
Dipole axis to liquid Distance 8,E.4.2 1.00 N 3 1 1 0.55 0.55 N-1
Input power and SAR drift measurement
8,6.6.2 0.65 R 3 1 1 0.36 0.36 ∞
Phantom and Tissue Parameters
Phantom Uncertainty (Shape and thickness tolerances)
E.3.1 0.05 R 3 1 1 0.02 0.02 ∞
Liquid conductivity - deviation from target value
E.3.2 5.00 R 3 0.64 0.43 1.83 1.23 ∞
Liquid conductivity - measurement uncertainty
E.3.3 5.00 N 1 0.64 0.43 3.18 2.14 ∞
Liquid permittivity - deviation from target value
E.3.2 0.03 R 3 0.6 0.49 0.01 0.01 ∞
Liquid permittivity - measurement uncertainty
E.3.3 10.00 N 1 0.6 0.49 6.06 4.95 M
Combined Standard Uncertainty
RSS 10.03 9.42
Expanded Uncertainty (95% Confidence interval)
k 20.05 18.85
Report No.:AGC00377150606EH01 Page 25 of 337
11. CONDUCTED POWER MEASUREMENT
Mode Frequency(MHz) Avg. Burst
Power(dBm) Duty cycle
Factor(dBm) Frame
Power(dBm)
Maximum Power <1>
GSM 900
880.2 31.66 -9 22.66
897.4 31.70 -9 22.70
914.8 31.62 -9 22.62
GPRS 900
(1 Slot)
880.2 31.42 -9 22.42
897.4 31.47 -9 22.47
914.8 31.43 -9 22.43
GPRS 900
(2 Slot)
880.2 28.59 -6 22.59
897.4 28.63 -6 22.63
914.8 28.60 -6 22.60
GPRS 900
(3 Slot)
880.2 26.55 -4.26 22.29
897.4 26.62 -4.26 22.36
914.8 26.58 -4.26 22.32
GPRS 900
(4 Slot)
880.2 25.45 -3 22.45
897.4 25.46 -3 22.46
914.8 25.43 -3 22.43
EGPRS 900
(1 Slot)
880.2 26.48 -9 17.48
897.4 26.36 -9 17.36
914.8 26.42 -9 17.42
EGPRS 900
(2 Slot)
880.2 24.38 -6 18.38
897.4 24.40 -6 18.40
914.8 24.32 -6 18.32
EGPRS 900
(3 Slot)
880.2 23.33 -4.26 19.07
897.4 23.39 -4.26 19.13
914.8 23.35 -4.26 19.09
EGPRS 900
(4 Slot)
880.2 22.34 -3 19.34
897.4 22.38 -3 19.38
914.8 22.31 -3 19.31
Maximum Power <2>
GSM 900
880.2 31.64 -9 22.64
897.4 31.68 -9 22.68
914.8 31.62 -9 22.62
Report No.:AGC00377150606EH01 Page 26 of 337
Mode Frequency(MHz) Avg. Burst
Power(dBm) Duty cycle
Factor(dBm) Frame
Power(dBm)
Maximum Power <1>
DCS1800
1710.2 28.54 -9 19.54
1747.4 28.57 -9 19.57
1784.8 28.52 -9 19.52
GPRS1800
(1 Slot)
1710.2 28.32 -9 19.32
1747.4 28.35 -9 19.35
1784.8 28.30 -9 19.30
GPRS1800
(2 Slot)
1710.2 25.48 -6 19.48
1747.4 25.52 -6 19.52
1784.8 25.46 -6 19.46
GPRS1800
(3 Slot)
1710.2 24.38 -4.26 20.12
1747.4 24.40 -4.26 20.14
1784.8 24.35 -4.26 20.09
GPRS1800
(4 Slot)
1710.2 22.42 -3 19.42
1747.4 22.46 -3 19.46
1784.8 22.40 -3 19.40
EGPRS1800
(1 Slot)
1710.2 25.31 -9 19.54
1747.4 25.38 -9 19.57
1784.8 25.54 -9 19.52
EGPRS1800
(2 Slot)
1710.2 24.38 -6 18.38
1747.4 24.42 -6 18.42
1784.8 24.40 -6 18.40
EGPRS1800
(3 Slot)
1710.2 23.50 -4.26 19.24
1747.4 23.53 -4.26 19.27
1784.8 23.47 -4.26 19.21
EGPRS1800
(4 Slot)
1710.2 21.46 -3 18.46
1747.4 21.49 -3 18.49
1784.8 21.42 -3 18.42
Maximum Power <2>
DCS1800
1710.2 28.53 -9 19.53
1747.4 28.55 -9 19.55
1784.8 28.51 -9 19.51
Note 1: The Frame Power (Source-based time-averaged Power) is scaled the maximum burst average power based on time slots. The calculated methods are show as following: Frame Power = Max burst power (1 Up Slot) – 9 dB Frame Power = Max burst power (2 Up Slot) – 6 dB Frame Power = Max burst power (3 Up Slot) – 4.26 dB Frame Power = Max burst power (4 Up Slot) – 3 dB
Report No.:AGC00377150606EH01 Page 27 of 337
UMTS BAND I
Mode Frequency(MHz) Avg. Burst Power (dBm)
WCDMA 2100 RMC
1922.4 23.62
1950 23.66
1977.6 23.60
HSDPA
Subtest 1
1922.4 22.67
1950 22.70
1977.6 22.63
HSDPA
Subtest 2
1922.4 22.42
1950 22.45
1977.6 22.40
HSDPA
Subtest 3
1922.4 22.58
1950 22.62
1977.6 22.54
HSDPA
Subtest 4
1922.4 22.57
1950 22.59
1977.6 22.53
HSUPA
Subtest 1
1922.4 21.47
1950 21.49
1977.6 21.42
HSUPA
Subtest 2
1922.4 21.55
1950 21.58
1977.6 21.53
HSUPA
Subtest 3
1922.4 21.47
1950 21.49
1977.6 21.43
HSUPA
Subtest 4
1922.4 21.58
1950 21.53
1977.6 21.54
HSUPA
Subtest 5
1922.4 20.84
1950 20.86
1977.6 20.82
Report No.:AGC00377150606EH01 Page 28 of 337
UMTS BAND VIII
Mode Frequency (MHz) Avg. Burst Power (dBm)
WCDMA 900 RMC
882.4 23.48
897.6 23.52
912.6 23.43
HSDPA
Subtest 1
882.4 22.51
897.6 22.56
912.6 22.53
HSDPA
Subtest 2
882.4 22.42
897.6 22.46
912.6 22.45
HSDPA
Subtest 3
882.4 22.47
897.6 22.49
912.6 22.44
HSDPA
Subtest 4
882.4 22.50
897.6 22.58
912.6 22.54
HSUPA
Subtest 1
882.4 21.45
897.6 21.59
912.6 21.43
HSUPA
Subtest 2
882.4 21.55
897.6 21.59
912.6 21.56
HSUPA
Subtest 3
882.4 21.42
897.6 21.46
912.6 21.40
HSUPA
Subtest 4
882.4 21.54
897.6 21.48
912.6 21.52
HSUPA
Subtest 5
882.4 20.75
897.6 20.83
912.6 20.82
Report No.:AGC00377150606EH01 Page 29 of 337
According to 3GPP 25.101 sub-clause 6.2.2 , the maximum output power is allowed to be reduced by following the table.
Table 6.1Aa: UE maximum output power with HS-DPCCH and E-DCH
UE Transmit Channel Configuration CM(db) MPR(db)
For all combinations of ,DPDCH,DPCCH HS-DPDCH,E-DPDCH and E-DPCCH
0≤ CM≤3.5 MAX(CM-1,0)
Note: CM=1 for c/ d=12/15, hs/ c=24/15.For all other combinations of DPDCH, DPCCH, HS-DPCCH,
E-DPDCH and E-DPCCH the MPR is based on the relative CM difference.
The device supports MPR to solve linearity issues (ACLR or SEM) due to the higher peak-to average ratios (PAR) of the HSUPA signal. This prevents saturating the full range of the TX DAC inside of device and provides a reduced power output to the RF transceiver chip according to the Cubic Metric (a function of the combinations of DPDCH, DPCCH, HS-DPCCH, E-DPDCH and E-DPCCH).
When E-DPDCH channels are present the beta gains on those channels are reduced firsts to try to get the power under the allowed limit. If the beta gains are lowered as far as possible, then a hard limiting is applied at the maximum allowed level.
The SW currently recalculates the cubic metric every time the beta gains on the E-DPDCH are reduced. The cubic metric will likely get lower each time this is done .However, there is no reported reduction of maximum output power in the HSUPA mode since the device also provides a compensation for the power back-off by increasing the gain of TX_AGC in the transceiver (PA) device.
The end effect is that the DUT output power is identical to the case where there is no MPR in the device.
Report No.:AGC00377150606EH01 Page 30 of 337
LTE BAND
Conducted Power of LTE Band I(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
18025 18300 18575
5MHz
QPSK
1
0 0 22.04 21.48 22.07
12 0 22.10 21.46 22.11
24 0 22.06 21.42 22.14
12
0 1 22.12 21.51 22.12
6 1 22.05 21.53 22.10
13 1 22.19 21.44 22.12
25 0 1 22.02 22.11 22.09
16QAM
1
0 1 21.32 21.40 21.31
12 1 21.36 21.42 21.36
24 1 21.31 21.37 21.30
12
0 2 21.14 21.33 21.33
6 2 21.25 21.36 21.35
13 2 21.20 21.30 21.32
25 0 2 22.00 22.02 22.01
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
18050 18300 18550
10MHz
QPSK
1
0 0 22.11 22.02 22.12
24 0 22.04 22.06 22.18
49 0 22.06 22.03 22.15
25
0 1 22.13 22.10 22.07
12 1 22.05 22.02 22.09
25 1 22.08 22.07 22.07
50 0 1 22.04 22.08 22.00
16QAM
1
0 1 21.42 21.40 21.33
24 1 21.56 21.42 21.40
49 1 21.49 21.46 21.34
25
0 2 21.35 21.25 21.31
12 2 21.36 21.26 21.36
25 2 21.28 21.33 21.30
50 0 2 21.40 21.38 21.31
Report No.:AGC00377150606EH01 Page 31 of 337
Conducted Power of LTE Band I(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
18075 18300 18525
15MHz
QPSK
1
0 0 22.15 22.19 22.14
37 0 22.20 22.23 22.20
74 0 22.16 22.30 22.16
37
0 1 22.24 22.35 22.23
19 1 22.26 22.21 22.25
38 1 22.20 22.22 22.20
75 0 1 22.22 22.29 22.20
16QAM
1
0 1 21.42 21.25 21.42
37 1 21.45 21.26 21.46
74 1 21.40 21.34 21.40
37
0 2 21.33 21.30 21.41
19 2 21.36 21.36 21.49
38 2 21.32 21.35 21.42
75 0 2 21.42 21.40 21.43
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
18100 18300 18500
20MHz
QPSK
1
0 0 22.62 22.60 22.59
49 0 22.46 22.52 22.54
99 0 22.50 22.53 22.50
50
0 1 22.42 22.45 22.40
25 1 22.44 22.50 22.47
50 1 22.35 22.42 22.37
100 0 1 22.40 22.43 22.35
16QAM
1
0 1 21.50 21.42 21.33
49 1 21.36 21.43 21.34
99 1 21.31 21.40 21.31
50
0 2 21.28 21.39 21.31
25 2 21.29 21.42 21.35
50 2 21.30 21.37 21.34
100 0 2 21.45 21.49 21.46
Report No.:AGC00377150606EH01 Page 32 of 337
Conducted Power of LTE Band III (dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19207 19575 19943
1.4MHz
QPSK
1
0 0 22.12 22.04 22.18
2 0 22.13 22.14 22.04
5 0 22.10 22.02 22.06
3
0 0 22.06 22.12 22.10
1 0 22.08 22.17 22.14
3 0 22.11 22.03 22.03
6 0 1 22.12 22.10 22.05
16QAM
1
0 1 21.33 21.25 21.24
2 1 21.39 21.26 21.28
5 1 21.35 21.22 21.31
3
0 1 21.26 21.31 21.24
1 1 21.28 21.35 21.33
3 1 21.24 21.30 21.30
6 0 2 21.30 21.25 21.29
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19215 19575 19935
3MHz
QPSK
1
0 0 22.27 22.31 22.24
7 0 22.26 22.25 22.20
14 0 22.23 22.24 22.25
8
0 1 22.15 22.22 22.30
4 1 22.20 22.16 22.30
8 1 22.19 22.19 22.24
15 0 1 22.20 22.24 22.26
16QAM
1
0 1 21.47 21.50 21.44
7 1 21.50 21.51 21.43
14 1 21.42 21.44 21.46
8
0 2 21.36 21.46 21.42
4 2 21.40 21.42 21.41
8 2 21.43 21.40 21.43
15 0 2 21.47 21.45 21.44
Report No.:AGC00377150606EH01 Page 33 of 337
Conducted Power of LTE Band III(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19225 19575 19925
5MHz
QPSK
1
0 0 22.24 22.34 22.20
12 0 22.16 22.17 22.16
24 0 22.30 22.26 22.24
12
0 1 22.28 22.30 22.24
6 1 22.12 22.15 22.15
13 1 22.21 22.28 22.20
25 0 1 22.22 22.24 22.23
16QAM
1
0 1 21.42 21.48 21.37
12 1 21.46 21.42 21.40
24 1 21.40 21.46 21.45
12
0 2 21.31 21.41 21.30
6 2 21.36 21.49 21.36
13 2 21.35 21.42 21.31
25 0 2 21.33 21.36 21.37
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19250 19575 19900
10MHz
QPSK
1
0 0 22.34 22.31 22.39
24 0 22.26 22.35 22.42
49 0 22.39 22.30 22.30
25
0 1 22.32 22.41 22.35
12 1 22.28 22.43 22.37
25 1 22.30 22.35 22.32
50 0 1 22.40 22.33 22.34
16QAM
1
0 1 21.51 21.41 21.44
24 1 21.53 21.45 21.47
49 1 21.50 21.46 21.42
25
0 2 21.26 21.52 21.56
12 2 21.48 21.38 21.43
25 2 21.42 21.42 21.34
50 0 2 21.59 21.48 21.40
Report No.:AGC00377150606EH01 Page 34 of 337
Conducted Power of LTE Band III (dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19275 19575 19875
15MHz
QPSK
1
0 0 22.26 22.25 22.24
37 0 22.38 22.27 22.28
74 0 22.24 22.21 22.23
37
0 1 22.21 22.26 22.31
19 1 22.31 22.31 22.25
38 1 22.29 22.26 22.37
75 0 1 22.31 22.32 22.34
16QAM
1
0 1 21.51 21.52 21.52
37 1 21.56 21.57 21.56
74 1 21.63 21.51 21.57
37
0 2 21.48 21.53 21.44
19 2 21.42 21.46 21.48
38 2 21.45 21.42 21.43
75 0 2 21.33 21.49 21.42
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
19300 19575 19850
20MHz
QPSK
1
0 0 22.58 22.62 22.54
49 0 22.53 22.51 22.53
99 0 22.54 22.43 22.51
50
0 1 22.42 22.48 22.52
25 1 22.47 22.42 22.46
50 1 22.36 22.44 22.42
100 0 1 22.42 22.37 22.40
16QAM
1
0 1 21.53 21.51 21.47
49 1 21.59 21.56 21.43
99 1 21.54 21.850 21.41
50
0 2 21.44 21.88 21.46
25 2 21.58 21.47 21.51
50 2 21.53 21.53 21.47
100 0 2 22.58 22.50 21.53
Report No.:AGC00377150606EH01 Page 35 of 337
Conducted Power of LTE Band VII (dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
20775 21100 21425
5MHz
QPSK
1
0 0 22.29 22.28 22.30
12 0 22.30 22.26 22.33
24 0 22.24 22.23 22.28
12
0 1 22.26 22.30 22.24
6 1 22.23 22.34 22.26
13 1 22.25 22.26 22.31
25 0 1 22.30 22.31 22.24
16QAM
1
0 1 21.41 21.35 21.43
12 1 21.46 21.79 21.35
24 1 21.45 21.42 21.37
12
0 2 21.36 21.41 21.31
6 2 21.39 21.45 21.31
13 2 21.42 21.40 21.42
25 0 2 21.40 21.43 21.34
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
20800 21100 21400
10MHz
QPSK
1
0 0 22.42 22.43 22.28
24 0 22.40 22.35 22.30
49 0 22.46 22.40 22.26
25
0 1 22.41 22.38 22.40
12 1 22.35 22.40 22.35
25 1 22.39 22.42 22.41
50 0 1 22.25 22.34 22.32
16QAM
1
0 1 21.55 21.53 21.42
24 1 21.53 21.40 21.76
49 1 21.51 21.46 21.41
25
0 2 21.59 21.47 21.48
12 2 21.50 21.51 21.50
25 2 21.44 21.43 21.44
50 0 2 21.46 21.44 21.47
Report No.:AGC00377150606EH01 Page 36 of 337
Conducted Power of LTE Band VII (dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
20825 21100 21375
15MHz
QPSK
1
0 0 22.32 22.21 22.34
37 0 22.26 22.25 22.32
74 0 22.34 22.29 22.32
37
0 1 22.28 22.34 22.34
19 1 22.32 22.32 22.24
38 1 22.27 22.27 22.26
75 0 1 22.30 22.26 22.30
16QAM
1
0 1 21.47 21.44 21.40
37 1 21.45 21.36 21.42
74 1 21.32 21.41 21.47
37
0 2 21.41 21.42 21.43
19 2 21.36 21.48 21.41
38 2 21.29 21.32 21.46
75 0 2 21.35 21.44 21.39
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
20850 21100 21350
20MHz
QPSK
1
0 0 22.57 22.52 22.47
49 0 22.51 22.51 22.45
99 0 22.43 22.53 22.44
50
0 1 22.46 22.46 22.43
25 1 22.42 22.48 22.40
50 1 22.44 22.40 22.46
100 0 1 22.40 22.39 22.35
16QAM
1
0 1 21.62 21.57 21.48
49 1 21.60 21.52 21.50
99 1 21.48 21.43 21.42
50
0 2 21.55 21.57 21.55
25 2 21.49 21.47 21.53
50 2 21.43 21.42 21.37
100 0 2 21.54 21.56 21.50
Report No.:AGC00377150606EH01 Page 37 of 337
Conducted Power of LTE Band XX(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
24175 24300 24425
5MHz
QPSK
1
0 0 22.14 22.12 22.15
12 0 22.20 22.09 22.16
24 0 22.22 22.23 22.13
12
0 1 22.19 22.20 22.24
6 1 22.16 22.22 22.15
13 1 22.20 22.26 22.12
25 0 1 22.11 22.21 22.08
16QAM
1
0 1 21.42 21.42 21.44
12 1 21.25 21.46 21.40
24 1 21.31 21.47 21.43
12
0 2 21.46 21.45 21.38
6 2 21.36 21.41 21.40
13 2 21.38 21.33 21.42
25 0 2 21.25 21.36 21.37
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
24200 24300 24400
10MHz
QPSK
0
0 0 22.35 22.27 22.34
24 0 22.39 22.26 22.26
49 0 22.21 22.24 22.33
25
0 1 22.26 22.30 22.35
12 1 22.34 22.24 22.35
25 1 22.28 22.32 22.31
50 0 1 22.30 22.31 22.24
16QAM
0
0 1 21.48 21.50 21.42
24 1 21.55 21.42 21.47
49 1 21.42 21.48 21.40
25
0 2 21.43 21.43 21.46
12 2 2141 21.53 21.35
25 2 21.36 21.42 21.39
50 0 2 21.40 21.46 21.40
Report No.:AGC00377150606EH01 Page 38 of 337
Conducted Power of LTE Band XX(dBm)
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
24225 24300 24375
15MHz
QPSK
1
0 0 22.35 22.41 22.35
37 0 22.29 22.42 22.32
74 0 22.31 22.32 22.31
37
0 1 22.25 22.35 22.26
19 1 22.24 22.39 22.30
38 1 22.20 22.33 22.37
75 0 1 22.31 22.37 22.29
16QAM
1
0 1 21.42 21.33 21.40
37 1 21.46 21.38 21.42
74 1 21.48 21.32 21.44
37
0 2 21.41 21.47 21.45
19 2 21.25 21.44 2142
38 2 21.23 21.46 21.46
75 0 2 21.26 21.38 21.42
Bandwidth Modulation RB size RB
offset Target MPR
Channel Channel Channel
24250 24300 24350
20MHz
QPSK
1
0 0 22.74 22.77 22.73
49 0 22.64 22.54 22.60
99 0 22.75 22.56 22.63
50
0 1 22.62 22.60 22.54
25 1 22.57 22.48 22.58
50 1 22.55 22.59 22.53
100 0 1 22.54 22.51 22.52
16QAM
1
0 1 21.54 21.63 21.59
49 1 21.55 21.52 21.54
99 1 21.60 21.57 21.62
50
0 2 21.63 21.66 21.57
25 2 21.58 21.54 21.51
50 2 21.52 21.59 21.53
100 0 2 21.51 21.50 21.54
Report No.:AGC00377150606EH01 Page 39 of 337
The following tests were conducted according to the test requirements outlined in section 6.2 of the 3GPP TS36.101 specification. UE Power Class: 3 (23 +/- 2dBm). The allowed Maximum Power Reduction (MPR) for the maximum output power due to higher order modulation and transmit bandwidth configuration (resource blocks) is specified in Table 6.2.3.3-1 of the 3GPP TS36.101.
Table 6.2.3.3-1 Maximum Power Reduction (MPR) for Power class3
Modulation Maximum Power Reduction (MPR) for Power[RB]
MPR(dB) 1.4MHz 3.0MHz 5MHz 10MHz 15MHz 20MHz
QPSK >5 >4 >8 >12 >16 >18 ≤1
16QAM ≤5 ≤4 ≤8 ≤12 ≤16 ≤18 ≤1
16QAM >5 >4 >8 >12 >16 >18 ≤2
The allowed A-MPR values specified below in Table 6.2.4.3-1 of 3GPP TS36.101 are in addition to the allowed MPR requirements. All the measurements below were performed with A-MPR disabled, by using Network Signaling Value of “NS_01”.3
Report No.:AGC00377150606EH01 Page 40 of 337
Table 6.2.4.3-1: Additional Maximum Power Reduction (A-MPR) / Spectrum Emission requirements
Network Signaling
value
Requirements (sub-clause)
E-UTRA Band Channel
bandwidth (MHz)
Resources Blocks (NRB)
A-MPR (dB)
NS_01 6.6.2.1.1 Table 5.2-1 1.4,3,5,10,15,20 Table 5.4.2-1 N/A
NS_03 6.6.2.2.3.1 2,4,10, 23, 25,35,36
3 >5 ≤ 1
5 >6 ≤ 1
10 >6 ≤ 1
15 >8 ≤ 1
20 >10 ≤ 1
NS_04 6.6.2.2.3.2 41 5 >6 ≤1
10, 15, 20 Table 6.2.4.3-4
NS_05 6.6.3.3.3.1 1 10,15,20 ≥ 50 ≤ 1
NS_06 6.6.2.2.3.3 12, 13, 14, 17 1.4, 3, 5, 10 Table 5.4.2-1 N/A
NS_07 6.6.2.2.3.3 6.6.3.3.3.2
13 10 Table 6.2.4.3-2 Table 6.2.4.3-2
NS_08 6.6.3.3.3.3 19 10, 15 > 44 ≤ 3
NS_09 6.6.3.3.3.4 21 10, 15 > 40 ≤ 1
> 55 ≤ 2
NS_10 20 15, 20 Table 6.2.4.3-3 Table 6.2.4.3-3
NS_11 6.6.2.2.1 6.6.3.3.13
231 1.4, 3, 5, 10,15,20
Table 6.2.4.3-5 Table 6.2.4.3-5
NS_12 6.6.3.3.5 26 1.4, 3, 5 Table 6.2.4.3-6 Table 6.2.4.3-6
NS_13 6.6.3.3.6 26 5 Table 6.2.4.3-7 Table 6.2.4.3-7
NS_14 6.6.3.3.7 26 10, 15 Table 6.2.4.3-8 Table 6.2.4.3-8
NS_15 6.6.3.3.8 26 1.4, 3, 5, 10, 15 Table 6.2.4.3-9 Table 6.2.4.3-10
Table 6.2.4.3-9, Table 6.2.4.3-10
NS_16 6.6.3.3.9 27 3, 5, 10 Table 6.2.4.3-11, Table 6.2.4.3-12,
Table 6.2.4.3-13
NS_17 6.6.3.3.10 6.6.3.3.11
28 28
5, 10 Table 5.4.2-1 N/A
5 ≥ 2 ≤ 1
NS_18 10, 15, 20 ≥ 1 ≤ 4
NS_19 10, 15, 20 Table 6.2.4.3-15 Table 6.2.4.3-15
NS_20 5, 10, 15, 20 Table 6.2.4.3-14 Table 6.2.4.3-14
…
NS_20 - - - - -
Report No.:AGC00377150606EH01 Page 41 of 337
12. TEST RESULTS
12.1. SAR Test Results Summary 12.1.1. Test position and configuration
Head SAR was performed with the device configured in the positions according to IEEE1528,IEC/EN62209-1, and Body SAR was performed with the device 15mm from the phantom according to IEC/EN62209-2.
12.1.2. Operation Mode 1 For GSM900, the power control is set to Maximum Power Class. For GPRS 900(GMSK, CS1), the power
control level is set to Maximum Power Class. For E-GPRS 900(GMSK: MCS1, 8PSK:MCS5), the power control is set to Maximum Power Class. For DCS 1800, the power control is set to Maximum Power Class. For GPRS 1800(GMSK, CS1), the power control level is set to Maximum Power Class. For E-GPRS 1800 (GMSK: MCS1, 8PSK:MCS5), the power control level is set to Maximum Power Class.
This is a multi-slot class 12 device capable of 4 uplink timeslots. During the head SAR test, the device was transmitting with maximum 1 uplink timeslot; during the body SAR test, it was transmitting with maximum 4 uplink timeslots. Additionally, this device doesn’t support dual transfer mode (DTM)
Testing with the headset was performed at the position and channels that resulted in the highest body SAR. This testing was performed with GPRS transmitting with 2/3/4 uplink timeslots. In the Body SAR test result table, body-worn means display of device down, body-front means display of device up.
2 For WCDMA, head and body SAR is tested under RMC 12.2k mode with power control set all up bits SAR for
AMR is not required since its power is less than RMC. For HSDPA/HSUPA, SAR is test with its maximum power mode.
3 The following test measurement is LTE procedure: a) Largest channel bandwidth standalone SAR test requirements
(a1) QPSK with 1 RB allocation
Start with the largest channel bandwidth and measure SAR for QPSK with 1 RB allocation, using the RB
offset and required test channel combination with the highest maximum output power for RB offsets at
the upper edge, middle and lower edge of each required test channel.
When the measured SAR is ≤ 1.0 W/kg, testing of the remaining RB offset configurations and required
test channels is not required for 1 RB allocation; otherwise, SAR is required for the remaining required
test channels and only for the RB offset configuration with the highest output power for that channel.
When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for all three RB
offset configurations for that required test channel.
(a2) QPSK with 50% RB allocation
Start with the largest channel bandwidth and measure SAR for QPSK with 50% RB allocation at the worst
position for 1 RB allocation in a1)
When the measured SAR is ≤ 1.0 W/kg, testing of the remaining RB offset configurations and required test
channels is not required for 50% RB allocation; otherwise, SAR is required for the remaining required test
channels and only for the RB offset configuration with the highest output power for that channel.
When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for all three RB offset
configurations for that required test channel.
(a3) QPSK with 100% RB allocation
Start with the largest channel bandwidth and measure SAR for QPSK with 100% RB allocation at the
worst position for 1 RB&50%RB allocation in a1&a2)
Report No.:AGC00377150606EH01 Page 42 of 337
When the measured SAR is ≤ 1.0 W/kg, testing of the remaining channels is not required for 100% RB
allocation; otherwise, SAR is required for the remaining channels and only for the highest output power for
that channel.
When the measured SAR of a required test channel is > 1.80 W/kg, SAR is required for low,mid,high
channel.
(a4) Higher order modulations
For each modulation besides QPSK; e.g., 16-QAM, 64-QAM, apply the QPSK procedures in above
sections to determine the QAM configurations that may need SAR measurement. For each configuration
identified as required for testing, SAR is required only when the highest maximum output power for the
configuration in the higher order modulation is > ½ dB higher than the highest maximum output power in
QPSK or when the measured SAR for the QPSK configuration is > 1.8W/kg.
b) Other channel bandwidth standalone SAR test requirements
For the other channel bandwidths used by the device in a frequency band, apply all the procedures
required for the largest channel bandwidth in section 4.1) to determine the channels and RB
configurations that need SAR testing and only measure SAR when the highest maximum output power of
a configuration requiring testing in the smaller channel bandwidth is > ½ dB higher than the highest
maximum output power of the largest channel bandwidth configuration or the measured SAR of a
configuration for the largest channel bandwidth is > 1.8 W/kg.
Report No.:AGC00377150606EH01 Page 43 of 337
12.1.3. SAR Test Results Summary SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 52.9
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: GSM900 with GMSK modulation
Position Mode Ch. Fr.
(MHz)
Power Drift
(<±5%)
SAR (10g)
(W/kg)
Max. Turn-up Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit W/kg
SIM 1 Card
Left Cheek voice 975 880.2 -0.05 0.162 32 31.66 0.175 2.0
Left Cheek voice 37 897.4 0.16 0.163 32 31.70 0.175 2.0
Left Cheek voice 124 914.8 -0.07 0.188 32 31.62 0.205 2.0
Left Tilt voice 37 897.4 0.12 0.059 32 31.70 0.063 2.0
Right Cheek voice 37 897.4 0.03 0.130 32 31.70 0.139 2.0
Right Tilt voice 37 897.4 -0.09 0.053 32 31.70 0.057 2.0
Body back voice 37 897.4 0.45 0.144 32 31.70 0.154 2.0
Body back GPRS-2 slots 37 897.4 0.66 0.081 29 28.63 0.088 2.0
Body back GPRS-3 slots 37 897.4 0.24 0.074 27 26.62 0.081 2.0
Body back GPRS-4 slots 37 897.4 -0.03 0.075 26 25.46 0.085 2.0
Body Front voice 37 897.4 0.16 0.174 32 31.70 0.186 2.0
Body Front voice with Ear. 37 897.4 0.27 0.156 32 31.70 0.167 2.0
SIM 2 Card
Left Cheek voice 124 914.8 -1.03 0.187 32 31.62 0.204 2.0
Body Front voice 37 897.4 0.33 0.168 32 31.68 0.181 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.:AGC00377150606EH01 Page 44 of 337
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 53.7
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: DCS1800 with GMSK modulation
Position Mode Ch. Fr.
(MHz)
Power Drift
(<±5%)
SAR (10g)
(W/kg)
Max. Turn-up Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit W/kg
SIM 1 Card
Left Cheek voice 512 1710.2 0.14 0.115 29 28.54 0.128 2.0
Left Cheek voice 698 1747.4 -0.03 0.139 29 28.57 0.153 2.0
Left Cheek voice 885 1784.8 0.08 0.182 29 28.52 0.203 2.0
Left Tilt voice 698 1747.4 0.56 0.038 29 28.57 0.042 2.0
Right Cheek voice 698 1747.4 -0.26 0.134 29 28.57 0.148 2.0
Right Tilt voice 698 1747.4 0.24 0.032 29 28.57 0.035 2.0
Body back voice 698 1747.4 -0.20 0.155 29 28.57 0.171 2.0
Body back GPRS-2 slots 698 1747.4 0.19 0.085 26 25.52 0.095 2.0
Body back GPRS-3 slots 698 1747.4 0.58 0.079 25 24.40 0.091 2.0
Body back GPRS-4 slots 698 1747.4 -0.36 0.086 23 22.46 0.097 2.0
Body Front voice 698 1747.4 0.33 0.169 29 28.57 0.187 2.0
Body Front voice with Ear. 698 1747.4 -0.03 0.149 29 28.57 0.165 2.0
SIM 2 Card
Left Cheek voice 885 1784.8 0.11 0.174 29 28.51 0.195 2.0
Body Front voice 698 1747.4 -0.07 0.164 29 28.55 0.182 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.:AGC00377150606EH01 Page 45 of 337
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 55.2
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: WCDMA Band I with QPSK modulation
Position Mode Ch. Fr.
(MHz)
Power Drift
(<±5%)
SAR (10g)
(W/kg)
Max. Turn-up Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit W/kg
SIM 1 Card
Left Cheek RMC 12.2kbps 9612 1922.4 1.00 0.815 24 23.62 0.890 2.0
Left Cheek RMC 12.2kbps 9750 1950 -0.03 0.703 24 23.66 0.760 2.0
Left Cheek RMC 12.2kbps 9888 1977.6 0.25 0.722 24 23.60 0.792 2.0
Left Tilt RMC 12.2kbps 9750 1950 0.20 0.158 24 23.66 0.171 2.0
Right Cheek RMC 12.2kbps 9750 1950 -0.06 0.322 24 23.66 0.348 2.0
Right Tilt RMC 12.2kbps 9750 1950 0.16 0.091 24 23.66 0.098 2.0
Body back RMC 12.2kbps 9612 1922.4 0.18 0.890 24 23.62 0.971 2.0
Body back RMC 12.2kbps 9750 1950 -0.22 1.059 24 23.66 1.145 2.0
Body back RMC 12.2kbps 9888 1977.6 -0.04 1.030 24 23.60 1.129 2.0
Body Front RMC 12.2kbps 9612 1922.4 0.27 0.949 24 23.62 1.036 2.0
Body Front RMC 12.2kbps 9750 1950 0.35 1.148 24 23.66 1.241 2.0
Body Front RMC 12.2kbps 9888 1977.6 0.29 1.118 24 23.60 1.226 2.0
Body Front HSPA 9750 1950 -1.06 0.912 23 22.70 0.977 2.0
Body Front RMC 12.2kbps with Ear.
9750 1950 0.08 0.910 24 23.66 0.984 2.0
Note:
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional.
·The test separation of all above table(body part) is 15mm.
Report No.:AGC00377150606EH01 Page 46 of 337
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 52.9
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: WCDMA Band VIII with QPSK modulation
Position Mode Ch. Fr.
(MHz)
Power Drift
(<±5%)
SAR (10g)
(W/kg)
Max. Turn-up Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit W/kg
SIM 1 Card
Left Cheek RMC 12.2kbps 2712 882.4 0.25 0.177 24 23.48 0.200 2.0
Left Cheek RMC 12.2kbps 2788 897.6 0.22 0.182 24 23.52 0.203 2.0
Left Cheek RMC 12.2kbps 2863 912.6 -0.03 0.036 24 23.43 0.041 2.0
Left Tilt RMC 12.2kbps 2788 897.6 0.06 0.056 24 23.52 0.063 2.0
Right Cheek RMC 12.2kbps 2788 897.6 0.47 0.144 24 23.52 0.161 2.0
Right Tilt RMC 12.2kbps 2788 897.6 -0.19 0.069 24 23.52 0.077 2.0
Body back RMC 12.2Kbps 2788 897.6 0.52 0.155 24 23.52 0.173 2.0
Body front RMC 12.2Kbps 2788 897.6 -0.03 0.183 24 23.52 0.204 2.0
Body front HSPA 2788 897.6 -0.04 0.154 23 22.56 0.170 2.0
Body front RMC 12.2Kbps with Ear.
2788 897.6 0.12 0.158 24 23.52 0.176 2.0
·When the 10-g SAR is ≤ 1.0W/kg, testing for low and high channel is optional. ·The test separation of all above table(body part) is 15mm.
Report No.:AGC00377150606EH01 Page 47 of 337
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 54.7
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: LTE Band I
BW MHz
MOD Position
Test Mode
Ch. Freq. (MHz)
Power
Drift (<±5%)
SAR (10g) (W/kg)
Max. Turnup Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg) UL RB
Allocation UL RB START
20 QPSK
Left Cheek
1 0 18025 1922.5 -0.02 0.322 23 22.62 0.351 2.0
Left Cheek
1 0 18300 1950 0.46 0.521 23 22.60 0.571 2.0
Left Cheek
1 0 18575 1977.5 -0.01 0.372 23 22.59 0.409 2.0
Left Tilt 1 0 18300 1950 0.03 0.088 23 22.60 0.096 2.0
Right Cheek
1 0 18300 1950 0.04 0.296 23 22.60 0.325 2.0
Right Tilt 1 0 18300 1950 0.26 0.071 23 22.60 0.078 2.0
Left Cheek
50 0 18300 1950 -0.33 0.427 23 22.45 0.485 2.0
Left Tilt 50 0 18300 1950 0.36 0.086 23 22.45 0.098 2.0
Right Cheek
50 0 18300 1950 0.32 0.243 23 22.45 0.276 2.0
Right Tilt 50 0 18300 1950 0.02 0.060 23 22.45 0.068 2.0
Left Cheek
100 0 18300 1950 -0.09 0.435 23 22.43 0.496 2.0
Left Tilt 100 0 18300 1950 1.00 0.088 23 22.43 0.100 2.0
Right Cheek
100 0 18300 1950 0.07 0.247 23 22.43 0.282 2.0
Right Tilt 100 0 18300 1950 -1.20 0.064 23 22.43 0.073 2.0
Body back
1 0 18300 1950 0.17 0.610 23 22.60 0.669 2.0
Body front 1 0 18300 1950 0.45 0.713 23 22.60 0.782 2.0
Body front +Ear
1 0 18300 1950 -0.16 0.608 23 22.60 0.667 2.0
Body back
50 0 18300 1950 0.44 0.488 23 22.45 0.554 2.0
Body front 50 0 18300 1950 0.16 0.586 23 22.45 0.665 2.0
Body back
100 0 18300 1950 -0.02 0.501 23 22.43 0.571 2.0
Body front 100 0 18300 1950 0.11 0.601 23 22.43 0.685 2.0
Report No.:AGC00377150606EH01 Page 48 of 337
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%):57.2
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: LTE Band III
BW MHz
MOD Position
Test Mode
Ch. Freq. (MHz)
Power
Drift (<±5%)
SAR (10g) (W/kg)
Max. Turnup Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg) UL RB
Allocation UL RB START
20 QPSK
Left Cheek
1 0 19575 1747.5 0.45 0.133 23 22.62 0.145 2.0
Left Tilt 1 0 19575 1747.5 -0.26 0.029 23 22.62 0.032 2.0
Right Cheek
1 0 19575 1747.5 0.22 0.130 23 22.62 0.142 2.0
Right Tilt 1 0 19575 1747.5 -0.03 0.019 23 22.62 0.021 2.0
Left Cheek
50 0 19575 1747.5 0.17 0.140 23 22.48 0.158 2.0
Left Tilt 50 0 19575 1747.5 0.20 0.030 23 22.48 0.034 2.0
Right Cheek
50 0 19575 1747.5 -0.06 0.141 23 22.48 0.159 2.0
Right Tilt 50 0 19575 1747.5 0.04 0.023 23 22.48 0.026 2.0
Left Cheek
100 0 19225 1712.5 0.59 0.097 23 22.42 0.111 2.0
Left Cheek
100 0 19575 1747.5 0.66 0.160 23 22.37 0.185 2.0
Left Cheek
100 0 19925 1782.5 0.26 0.156 23 22.40 0.179 2.0
Left Tilt 100 0 19575 1747.5 0.24 0.037 23 22.37 0.043 2.0
Right Cheek
100 0 19575 1747.5 -0.58 0.160 23 22.37 0.185 2.0
Right Tilt 100 0 19575 1747.5 0.16 0.027 23 22.37 0.031 2.0
Body back
1 0 19575 1747.5 0.11 0.235 23 22.62 0.256 2.0
Body front 1 0 19575 1747.5 -0.03 0.242 23 22.62 0.264 2.0
Body back
50 0 19575 1747.5 0.18 0.236 23 22.48 0.266 2.0
Body front 50 0 19575 1747.5 -0.02 0.253 23 22.48 0.285 2.0
Body back
100 0 19575 1747.5 -1.02 0.264 23 22.37 0.305 2.0
Body front 100 0 19575 1747.5 0.09 0.282 23 22.37 0.326 2.0
Body front+Ear
100 0 19575 1747.5 0.17 0.262 23 22.37 0.303 2.0
Report No.:AGC00377150606EH01 Page 49 of 337
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 54.9
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: LTE Band VII
BW MHz
MOD Position
Test Mode
Ch. Freq. (MHz)
Power
Drift (<±5%)
SAR (10g) (W/kg)
Max. Turnup Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg) UL RB
Allocation UL RB START
20 QPSK
Left Cheek
1 0 21100 2535 -1.06 0.389 23 22.52 0.434 2.0
Left Tilt 1 0 21100 2535 -0.03 0.076 23 22.52 0.085 2.0
Right Cheek
1 0 21100 2535 0.02 0.367 23 22.52 0.410 2.0
Right Tilt 1 0 21100 2535 0.05 0.045 23 22.52 0.050 2.0
Left Cheek
50 0 21100 2535 0.46 0.331 23 22.46 0.375 2.0
Left Tilt 50 0 21100 2535 0.24 0.082 23 22.46 0.093 2.0
Right Cheek
50 0 21100 2535 0.18 0.302 23 22.46 0.342 2.0
Right Tilt 50 0 21100 2535 0.15 0.037 23 22.46 0.042 2.0
Left Cheek
100 0 20775 2502.5 0.11 0.453 23 22.40 0.520 2.0
Left Cheek
100 0 21100 2535 -0.03 0.339 23 22.39 0.390 2.0
Left Cheek
100 0 21425 2567.5 0.33 0.315 23 22.35 0.366 2.0
Left Tilt 100 0 21100 2535 0.04 0.089 23 22.39 0.102 2.0
Right Cheek
100 0 21100 2535 -0.05 0.305 23 22.39 0.351 2.0
Right Tilt 100 0 21100 2535 0.10 0.038 23 22.39 0.044 2.0
Body back
1 0 21100 2535 0.47 0.310 23 22.52 0.346 2.0
Body front 1 0 21100 2535 0.28 0.486 23 22.52 0.543 2.0
Body front+Ear
1 0 21100 2535 0.15 0.433 23 22.52 0.484 2.0
Body back
50 0 21100 2535 -1.03 0.263 23 22.46 0.298 2.0
Body front 50 0 21100 2535 0.06 0.409 23 22.46 0.463 2.0
Body back
100 0 21100 2535 -0.05 0.272 23 22.39 0.313 2.0
Body front 100 0 21100 2535 0.17 0.411 23 22.39 0.473 2.0
Report No.:AGC00377150606EH01 Page 50 of 337
SAR MEASUREMENT
Depth of Liquid (cm):>15 Relative Humidity (%): 59.3
Product: GSM /WCDMA/FDD-LTE Mobile Phone
Test Mode: LTE Band XX
BW MHz
MOD Position
Test Mode
Ch. Freq. (MHz)
Power Drift
(<±5%)
SAR (10g) (W/kg)
Max. Turnup Power (dBm)
Meas. output Power (dBm)
Scaled SAR
(W/Kg)
Limit (W/kg) UL RB
Allocation UL RB START
20 QPSK
Left Cheek
1 0 24175 834.5 0.45 0.132 23 22.74 0.140 2.0
Left Cheek
1 0 24300 847 0.16 0.149 23 22.77 0.157 2.0
Left Cheek
1 0 24425 859.5 0.23 0.113 23 22.73 0.120 2.0
Left Tilt 1 0 24300 847 1.00 0.067 23 22.77 0.071 2.0
Right Cheek
1 0 24300 847 0.03 0.100 23 22.77 0.105 2.0
Right Tilt 1 0 24300 847 -1.07 0.071 23 22.77 0.075 2.0
Left Cheek
50 0 24300 847 0.45 0.141 23 22.60 0.155 2.0
Left Tilt 50 0 24300 847 0.26 0.074 23 22.60 0.081 2.0
Right Cheek
50 0 24300 847 -0.08 0.100 23 22.60 0.110 2.0
Right Tilt 50 0 24300 847 0.33 0.071 23 22.60 0.078 2.0
Left Cheek
100 0 24300 847 0.39 0.133 23 22.51 0.149 2.0
Left Tilt 100 0 24300 847 0.46 0.067 23 22.51 0.075 2.0
Right Cheek
100 0 24300 847 -0.15 0.100 23 22.51 0.112 2.0
Right Tilt 100 0 24300 847 0.10 0.071 23 22.51 0.079 2.0
Body back
1 0 24300 847 -0.07 0.124 23 22.77 0.131 2.0
Body front 1 0 24300 847 0.46 0.136 23 22.77 0.143 2.0
Body back+Ear
1 0 24300 847 0.13 0.137 23 22.77 0.144 2.0
Body back
50 0 24300 847 0.05 0.116 23 22.60 0.127 2.0
Body front 50 0 24300 847 0.47 0.135 23 22.60 0.148 2.0
Body back
100 0 24300 847 -0.05 0.110 23 22.51 0.123 2.0
Body front 100 0 24300 847 0.09 0.126 23 22.51 0.141 2.0
Report No.:AGC00377150606EH01 Page 51 of 337
APPENDIX A. SAR SYSTEM CHECK DATA Test Laboratory: AGC Lab Date: July 21,2015 System Check Head 835MHz DUT: Dipole 835 MHz Type: SID 835 Communication System: CW; Communication System Band: D835(835.0 MHz); Duty Cycle: 1:1; Conv.F=5.03 Frequency: 835MHz; Medium parameters used: f = 835MHz; ζ=0.89mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 835 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 835 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=0.00
SAR 10g (W/Kg) 0.401537
SAR 1g (W/Kg) 0.630053
Report No.:AGC00377150606EH01 Page 52 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.6611 0.4449 0.3020 0.2091 0.1465 0.1027
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 53 of 337
Test Laboratory: AGC Lab Date: July 03,2015 System Check Head 900 MHz DUT: Dipole 900 MHz Type: SID 900 Communication System: CW; Communication System Band: D900 (900.0 MHz); Duty Cycle: 1:1; Conv.F=5.07 Frequency: 900 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 900 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 900 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=0.00
SAR 10g (W/Kg) 0.425163
SAR 1g (W/Kg) 0.660954
Report No.:AGC00377150606EH01 Page 54 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 0.6931 0.4620 0.3173 0.2181 0.1525 0.1071
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 55 of 337
Test Laboratory: AGC Lab Date: July 02,2015 System Check Head 1800MHz DUT: Dipole 1800 MHz; Type: SID 1800 Communication System: CW; Communication System Band: D1800 (1800.0 MHz); Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1800 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 21.4, Liquid temperature (℃): 21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 1800 Head/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/System Check 1800 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=0.00
SAR 10g (W/Kg) 1.242518
SAR 1g (W/Kg) 2.410369
Report No.:AGC00377150606EH01 Page 56 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 2.5500 1.3294 0.7162 0.3917 0.2153 0.1194
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 57 of 337
Test Laboratory: AGC Lab Date: July 04,2015 System Check Head 2000MHz DUT: Dipole 2000 MHz; Type: SID 2000 Communication System: CW; Communication System Band: D2000 (2000.0 MHz); Duty Cycle: 1:1; Conv.F=4.12 Frequency: 2000MHz; Medium parameters used: f = 2000 MHz; ζ=1.38 mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 21.8, Liquid temperature (℃): 21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 2000 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2000 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=-1.00
SAR 10g (W/Kg) 1.241745
SAR 1g (W/Kg) 2.548623
Report No.:AGC00377150606EH01 Page 58 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 2.6876 1.3090 0.6587 0.3323 0.1702 0.0871
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 59 of 337
Test Laboratory: AGC Lab Date: July 20,2015 System Check Head 1800MHz DUT: Dipole 1800 MHz; Type: SID 1800 Communication System: CW; Communication System Band: D1800 (1800.0 MHz); Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1800 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 21.8, Liquid temperature (℃): 21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 1800 Head/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/System Check 1800 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=-1.00
SAR 10g (W/Kg) 1.363586
SAR 1g (W/Kg) 2.448316
Report No.:AGC00377150606EH01 Page 60 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 2.3736 1.3549 0.8007 0.4792 0.2907 0.1779
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 61 of 337
Test Laboratory: AGC Lab Date: July 22,2015 System Check Head 2000MHz DUT: Dipole 2000 MHz; Type: SID 2000 Communication System: CW; Communication System Band: D2000 (2000.0 MHz); Duty Cycle: 1:1; Conv.F=4.12 Frequency: 2000MHz; Medium parameters used: f = 2000 MHz; ζ=1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 21.9, Liquid temperature (℃): 21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 2000 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2000 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=-1.00
SAR 10g (W/Kg) 1.394118
SAR 1g (W/Kg) 2.610046
Report No.:AGC00377150606EH01 Page 62 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 2.7509 1.5174 0.8642 0.4971 0.2906 0.1707
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 63 of 337
Test Laboratory: AGC Lab Date: July 23,2015 System Check Head 2600MHz DUT: Dipole 2600 MHz; Type: SID 2600 Communication System: CW; Communication System Band: D2600 (2600.0 MHz); Duty Cycle: 1:1; Conv.F=3.79 Frequency:2600 MHz; Medium parameters used: f = 2600 MHz; ζ=1.90mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm
Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/System Check 2600 Head/Area Scan: Measurement grid: dx=8mm,dy=8mm Configuration/System Check 2600 Head/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=0.00
SAR 10g (W/Kg) 1.612269
SAR 1g (W/Kg) 3.249095
Report No.:AGC00377150606EH01 Page 64 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00
SAR
(W/Kg)
0.0000 3.4246 1.7343 0.9022 0.4727 0.2512 0.1357
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 65 of 337
APPENDIX B. SAR MEASUREMENT DATA Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 Low-Touch-Left <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.07 Frequency: 880.2 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Low- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Low- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band GSM 900
Channels Low
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-50.00
SAR 10g (W/Kg) 0.162353
SAR 1g (W/Kg) 0.240236
Report No.:AGC00377150606EH01 Page 66 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2505 0.1858 0.1375 0.1015
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 67 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 Mid-Touch-Left <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-55.00
SAR 10g (W/Kg) 0.163108
SAR 1g (W/Kg) 0.240808
Report No.:AGC00377150606EH01 Page 68 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2519 0.1842 0.1361 0.1020
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 69 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 High-Touch-Left <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.07 Frequency:914.8 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 High- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 High- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band GSM 900
Channels High
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-49.00
SAR 10g (W/Kg) 0.188022
SAR 1g (W/Kg) 0.269656
Report No.:AGC00377150606EH01 Page 70 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2813 0.2170 0.1644 0.1215
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 71 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 Mid -Tilt-Left <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm,dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-1.00, Y=7.00
SAR 10g (W/Kg) 0.058643
SAR 1g (W/Kg) 0.083536
Report No.:AGC00377150606EH01 Page 72 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0840 0.0640 0.0475 0.0342
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 73 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 Mid- Touch-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-63.00, Y=-66.00
SAR 10g (W/Kg) 0.129922
SAR 1g (W/Kg) 0.223371
Report No.:AGC00377150606EH01 Page 74 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2298 0.1374 0.0836 0.0533
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 75 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 Mid-Tilt-Right <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-25.00, Y=9.00
SAR 10g (W/Kg) 0.052546
SAR 1g (W/Kg) 0.072560
Report No.:AGC00377150606EH01 Page 76 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0751 0.0560 0.0424 0.0327
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 77 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 High-Touch-Left <SIM 2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1: 8; Conv.F=5.07 Frequency:914.8 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 High- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 High- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band GSM 900
Channels High
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-63.00
SAR 10g (W/Kg) 0.186927
SAR 1g (W/Kg) 0.280194
Report No.:AGC00377150606EH01 Page 78 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2769 0.2011 0.1461 0.1062
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 79 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM900 Mid-Body-Worn- Back (MS) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: GSM900; Duty Cycle: 1:8; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=9.00, Y=40.00
SAR 10g (W/Kg) 0.144104
SAR 1g (W/Kg) 0.240550
Report No.:AGC00377150606EH01 Page 80 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2600 0.1577 0.0990 0.0668
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 81 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GPRS 900 Mid-Body- Worn- Back (2up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: GPRS-2 Slot; Communication System Band: GSM 900;Duty Cycle:1:4.2 ; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 4.0)
SURFACE SAR VOLUME SAR
Maximum location: X=15.00, Y=40.00
SAR 10g (W/Kg) 0.081045
SAR 1g (W/Kg) 0.131761
Report No.:AGC00377150606EH01 Page 82 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1357 0.0880 0.0585 0.0405
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 83 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GPRS 900 Mid-Body- Worn- Back (3up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: GPRS-3 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.7 ; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid-Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid-Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 2.7)
SURFACE SAR VOLUME SAR
Maximum location: X=24.00, Y=24.00
SAR 10g (W/Kg) 0.074029
SAR 1g (W/Kg) 0.119025
Report No.:AGC00377150606EH01 Page 84 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1260 0.0785 0.0502 0.0337
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 85 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GPRS 900 Mid-Body- Worn- Back (4up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: GPRS-4 Slot; Communication System Band: GSM 900;Duty Cycle:1:2.1 ; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 900 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 900 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=2.00, Y=43.00
SAR 10g (W/Kg) 0.074595
SAR 1g (W/Kg) 0.118168
Report No.:AGC00377150606EH01 Page 86 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1207 0.0880 0.0622 0.0422
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 87 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 Mid-Body- Worn- Front (MS) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Body- Front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-22.00, Y=37.00
SAR 10g (W/Kg) 0.173885
SAR 1g (W/Kg) 0.304355
Report No.:AGC00377150606EH01 Page 88 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.3206 0.1796 0.1068 0.0721
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 89 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 Mid-Body- Worn- Front (MS) –with earphone<SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Body- Front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=24.00, Y=16.00
SAR 10g (W/Kg) 0.155610
SAR 1g (W/Kg) 0.255505
Report No.:AGC00377150606EH01 Page 90 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2707 0.1736 0.1107 0.0706
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 91 of 337
Test Laboratory: AGC Lab Date: July 03,2015 GSM 900 Mid-Body- Worn- Front (MS) <SIM 2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8; Conv.F=5.07 Frequency: 897.4 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GSM 900 Mid- Body- Front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GSM 900 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band GSM 900
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-24.00, Y=32.00
SAR 10g (W/Kg) 0.167755
SAR 1g (W/Kg) 0.286163
Report No.:AGC00377150606EH01 Page 92 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.3014 0.1798 0.1113 0.0743
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 93 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Low-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1710.2 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Low- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Low- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band DCS 1800
Channels Low
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-54.00
SAR 10g (W/Kg) 0.114627
SAR 1g (W/Kg) 0.206154
Report No.:AGC00377150606EH01 Page 94 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2183 0.1167 0.0644 0.0394
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 95 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Mid-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-55.00
SAR 10g (W/Kg) 0.138572
SAR 1g (W/Kg) 0.242386
Report No.:AGC00377150606EH01 Page 96 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2524 0.1384 0.0783 0.0484
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 97 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 High-Touch-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1784.8 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 High- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 High- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band DCS 1800
Channels High
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-79.00, Y=-56.00
SAR 10g (W/Kg) 0.182354
SAR 1g (W/Kg) 0.324515
Report No.:AGC00377150606EH01 Page 98 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.3373 0.1941 0.1122 0.0670
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 99 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Mid-Tilt-Left <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm,dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-46.00
SAR 10g (W/Kg) 0.037998
SAR 1g (W/Kg) 0.058566
Report No.:AGC00377150606EH01 Page 100 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0609 0.0392 0.0258 0.0175
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 101 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Mid-Touch -Right <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-50.00, Y=-71.00
SAR 10g (W/Kg) 0.134280
SAR 1g (W/Kg) 0.223206
Report No.:AGC00377150606EH01 Page 102 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2319 0.1464 0.0939 0.0624
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 103 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Mid-Tilt- Right <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-32.00, Y=-40.00
SAR 10g (W/Kg) 0.031508
SAR 1g (W/Kg) 0.044750
Report No.:AGC00377150606EH01 Page 104 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0464 0.0345 0.0253 0.0183
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 105 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 High-Touch-Left <SIM2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1784.8 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 High- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 High- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band DCS 1800
Channels High
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-48.00
SAR 10g (W/Kg) 0.174051
SAR 1g (W/Kg) 0.315742
Report No.:AGC00377150606EH01 Page 106 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.3208 0.1572 0.0811 0.0498
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 107 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Mid-Body-Worn- Back (MS) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=33.00
SAR 10g (W/Kg) 0.154918
SAR 1g (W/Kg) 0.246754
Report No.:AGC00377150606EH01 Page 108 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2587 0.1741 0.1139 0.0715
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 109 of 337
Test Laboratory: AGC Lab Date: July 02,2015 GPRS 1800 Mid-Body- Worn- Back (2up) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: GPRS-2 Slot; Communication System Band: DCS1800; Duty Cycle: 1:4.2; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 4.0)
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=39.00
SAR 10g (W/Kg) 0.084849
SAR 1g (W/Kg) 0.144570
Report No.:AGC00377150606EH01 Page 110 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1518 0.0865 0.0519 0.0349
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 111 of 337
Test Laboratory: AGC Lab Date: July 02,2015 GPRS 1800 Mid-Body- Worn- Back (3up) <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: GPRS-3 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.7; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 2.7)
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=32.00
SAR 10g (W/Kg) 0.078643
SAR 1g (W/Kg) 0.120476
Report No.:AGC00377150606EH01 Page 112 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1224 0.0845 0.0571 0.0375
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 113 of 337
Test Laboratory: AGC Lab Date: July 02,2015 GPRS 1800 Mid-Body- Worn- Back (4up) <SIM1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: GPRS-4 Slot; Communication System Band: DCS1800; Duty Cycle: 1:2.1; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/GPRS 1800 Mid- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 1800 Mid- Body- Back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 2.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-6.00, Y=34.00
SAR 10g (W/Kg) 0.086340
SAR 1g (W/Kg) 0.136928
Report No.:AGC00377150606EH01 Page 114 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1400 0.0993 0.0674 0.0428
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 115 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Mid-Body-Worn-Front (MS) <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08;; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Body- Front/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-6.00, Y=34.00
SAR 10g (W/Kg) 0.169053
SAR 1g (W/Kg) 0.279766
Report No.:AGC00377150606EH01 Page 116 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2938 0.1829 0.1148 0.0739
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 117 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Mid-Body-Worn-Front (MS) –with earphone <SIM 1> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08;; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Body- Front/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=34.00
SAR 10g (W/Kg) 0.148560
SAR 1g (W/Kg) 0.238215
Report No.:AGC00377150606EH01 Page 118 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2495 0.1609 0.1039 0.0677
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 119 of 337
Test Laboratory: AGC Lab Date: July 02,2015 DCS 1800 Mid-Body-Worn-Front (MS) <SIM 2> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8; Conv.F=4.35 Frequency: 1747.4 MHz; Medium parameters used: f = 1800 MHz; ζ= 1.41 mho/m; εr =40.08;; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.4, Liquid temperature (℃):21.2
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/DCS1800 Mid- Body- Front/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/DCS1800 Mid- Body- Front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan surf_sam_plan.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band DCS 1800
Channels Middle
Signal TDMA (Crest factor: 8.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-2.00, Y=35.00
SAR 10g (W/Kg) 0.163509
SAR 1g (W/Kg) 0.268744
Report No.:AGC00377150606EH01 Page 120 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2839 0.1791 0.1144 0.0754
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 121 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Low-Touch-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ; Duty Cycle: 1:1; Conv.F=4.12;
Frequency: 1922.4MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA Band I Low-Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/ WCDMA Band I Low-Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band WCDMA BandⅠ
Channels Low
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-63.00
SAR 10g (W/Kg) 0.814735
SAR 1g (W/Kg) 1.395665
Report No.:AGC00377150606EH01 Page 122 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.4656 0.8713 0.5282 0.3370
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 123 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Mid-Touch-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ; Duty Cycle: 1:1; Conv.F=4.12;
Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA Band I Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/ WCDMA Band I Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band WCDMA BandⅠ
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-63.00
SAR 10g (W/Kg) 0.702952
SAR 1g (W/Kg) 1.191114
Report No.:AGC00377150606EH01 Page 124 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.2485 0.7528 0.4622 0.2971
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 125 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I High-Touch-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ; Duty Cycle: 1:1; Conv.F=4.12;
Frequency: 1977.6MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA Band I High-Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/ WCDMA Band I High-Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band WCDMA BandⅠ
Channels High
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-65.00
SAR 10g (W/Kg) 0.722283
SAR 1g (W/Kg) 1.228346
Report No.:AGC00377150606EH01 Page 126 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.2797 0.7650 0.4661 0.2983
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 127 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Mid-Tilt-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BandⅠ Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BandⅠ Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band WCDMA BandⅠ
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-61.00, Y=-64.00
SAR 10g (W/Kg) 0.157590
SAR 1g (W/Kg) 0.243533
Report No.:AGC00377150606EH01 Page 128 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2551 0.1677 0.1111 0.0749
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 129 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Mid-Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Right Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BandⅠMid-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/ WCDMA BandⅠMid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band WCDMA BandⅠ
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-53.00, Y=-69.00
SAR 10g (W/Kg) 0.322110
SAR 1g (W/Kg) 0.556134
Report No.:AGC00377150606EH01 Page 130 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.5908 0.3492 0.2094 0.1311
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 131 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Mid-Tilt-Right <RMC> DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Right Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠMid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠMid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band WCDMA BandⅠ
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-49.00, Y=2.00
SAR 10g (W/Kg) 0.091403
SAR 1g (W/Kg) 0.138439
Report No.:AGC00377150606EH01 Page 132 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1447 0.1004 0.0694 0.0479
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 133 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Low-Body-Towards Grounds (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1922.4MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠLow-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠLow-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BandⅠ
Channels Low
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-5.00, Y=38.00
SAR 10g (W/Kg) 0.890357
SAR 1g (W/Kg) 1.466115
Report No.:AGC00377150606EH01 Page 134 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.5527 0.9878 0.6267 0.3997
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 135 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Mid-Body-Towards Grounds (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠMid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠMid-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BandⅠ
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-7.00, Y=38.00
SAR 10g (W/Kg) 1.058965
SAR 1g (W/Kg) 1.754522
Report No.:AGC00377150606EH01 Page 136 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.8572 1.1708 0.7373 0.4686
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 137 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I High-Body-Towards Grounds (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1977.6MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠHigh-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠHigh-Body-Back//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BandⅠ
Channels High
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-8.00, Y=38.00
SAR 10g (W/Kg) 1.030159
SAR 1g (W/Kg) 1.713446
Report No.:AGC00377150606EH01 Page 138 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.8126 1.1350 0.7105 0.4498
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 139 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Low- Body- Towards Phantom (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1922.4MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠLow-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠLow-Body-Front//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band WCDMA BandⅠ
Channels Low
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=1.00, Y=33.00
SAR 10g (W/Kg) 0.948837
SAR 1g (W/Kg) 1.589517
Report No.:AGC00377150606EH01 Page 140 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.6826 1.0455 0.6514 0.4128
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 141 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Mid- Body- Towards Phantom (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠMid-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠMid-Body-Front//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band WCDMA BandⅠ
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=2.00, Y=33.00
SAR 10g (W/Kg) 1.147695
SAR 1g (W/Kg) 1.925022
Report No.:AGC00377150606EH01 Page 142 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 2.0395 1.2633 0.7853 0.4973
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 143 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I High- Body- Towards Phantom (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1977.6MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠHigh-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠHigh-Body-Front//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band WCDMA BandⅠ
Channels High
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=5.00, Y=33.00
SAR 10g (W/Kg) 1.117708
SAR 1g (W/Kg) 1.882745
Report No.:AGC00377150606EH01 Page 144 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.9922 1.2272 0.7591 0.4793
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 145 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Mid- Body- Towards Phantom (HSPA) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠMid-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠMid-Body-Front//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band WCDMA BandⅠ
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-6.00, Y=38.00
SAR 10g (W/Kg) 0.911914
SAR 1g (W/Kg) 1.503989
Report No.:AGC00377150606EH01 Page 146 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.5914 1.0096 0.6397 0.4086
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 147 of 337
Test Laboratory: AGC Lab Date: July 04,2015 WCDMA Band I Mid- Body- Towards Phantom (RMC) - with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Conv.F=4.12;
Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38mho/m; εr =39.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/WCDMA BANDⅠMid-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/WCDMA BANDⅠMid-Body-Front//Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band WCDMA BandⅠ
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-6.00, Y=38.00
SAR 10g (W/Kg) 0.910070
SAR 1g (W/Kg) 1.499092
Report No.:AGC00377150606EH01 Page 148 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 1.5866 1.0094 0.6407 0.4089
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 149 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Low-Touch-Left (RMC ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 882.4MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Low-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ WCDMA BAND VIII Low-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band WCDMA BAND VIII
Channels Low
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-53.00
SAR 10g (W/Kg) 0.177091
SAR 1g (W/Kg) 0.260460
Report No.:AGC00377150606EH01 Page 150 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2734 0.2026 0.1496 0.1099
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 151 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Mid-Touch-Left (RMC ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ WCDMA BAND VIII Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-55.00
SAR 10g (W/Kg) 0.182338
SAR 1g (W/Kg) 0.272526
Report No.:AGC00377150606EH01 Page 152 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2871 0.2121 0.1554 0.1124
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 153 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII High-Touch-Left (RMC ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 912.6MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII High-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ WCDMA BAND VIII High-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band WCDMA BAND VIII
Channels High
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-52.00
SAR 10g (W/Kg) 0.036091
SAR 1g (W/Kg) 0.054380
Report No.:AGC00377150606EH01 Page 154 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0573 0.0417 0.0301 0.0215
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 155 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Mid- Tilt-Left (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-2.00, Y=6.00
SAR 10g (W/Kg) 0.056252
SAR 1g (W/Kg) 0.080268
Report No.:AGC00377150606EH01 Page 156 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0829 0.0615 0.0453 0.0331
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 157 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Mid- Touch-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 897.6MHz;; Medium parameters used: f = 900 MHz; ζ=0.96mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-62.00, Y=-71.00
SAR 10g (W/Kg) 0.143991
SAR 1g (W/Kg) 0.237566
Report No.:AGC00377150606EH01 Page 158 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2520 0.1621 0.1048 0.0688
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 159 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Mid-Tilt-Right (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-21.00, Y=11.00
SAR 10g (W/Kg) 0.069136
SAR 1g (W/Kg) 0.096779
Report No.:AGC00377150606EH01 Page 160 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1007 0.0755 0.0567 0.0428
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 161 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Mid-Body-Towards Grounds (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m;
Area Scan surf_sam_plan.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=8.00, Y=33.00
SAR 10g (W/Kg) 0.154894
SAR 1g (W/Kg) 0.259431
Report No.:AGC00377150606EH01 Page 162 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2765 0.1750 0.1119 0.0734
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 163 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Mid-Body-Towards Phantom (RMC) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Body-Front/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Body-Front/ Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m;
Area Scan surf_sam_plan.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=31.00
SAR 10g (W/Kg) 0.183137
SAR 1g (W/Kg) 0.311879
Report No.:AGC00377150606EH01 Page 164 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.3328 0.2080 0.1312 0.0849
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 165 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Mid-Body-Towards Ground (HSPA) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid- Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m;
Area Scan surf_sam_plan.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=8.00, Y=33.00
SAR 10g (W/Kg) 0.154157
SAR 1g (W/Kg) 0.258558
Report No.:AGC00377150606EH01 Page 166 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2756 0.1743 0.1113 0.0729
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 167 of 337
Test Laboratory: AGC Lab Date: July 03,2015 WCDMA Band VIII Mid-Body-Towards Grounds (RMC) - with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Conv.F=5.07 Frequency: 897.6 MHz; Medium parameters used: f = 900 MHz; ζ=0.96 mho/m; εr =42.03; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 22.0
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ WCDMA BAND VIII Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA BAND VIII Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m;
Area Scan surf_sam_plan.txt
Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band WCDMA BAND VIII
Channels Middle
Signal CDMA (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=26.00, Y=13.00
SAR 10g (W/Kg) 0.157566
SAR 1g (W/Kg) 0.262862
Report No.:AGC00377150606EH01 Page 168 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2776 0.1720 0.1079 0.0698
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 169 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Low-Touch-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1922.5MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠLow- Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠLow- Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BandⅠ
Channels Low
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-66.00
SAR 10g (W/Kg) 0.321727 SAR 1g (W/Kg) 0.542067
Report No.:AGC00377150606EH01 Page 170 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.5672 0.3441 0.2117 0.1355
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 171 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Touch-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-64.00
SAR 10g (W/Kg) 0.520709 SAR 1g (W/Kg) 0.890845
Report No.:AGC00377150606EH01 Page 172 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.9375 0.5619 0.3421 0.2177
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 173 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I High-Touch-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency:
1977.5MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ;
Phantom section: Left Section
Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠHIgh- Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠHigh- Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BandⅠ
Channels High
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-66.00
SAR 10g (W/Kg) 0.372259 SAR 1g (W/Kg) 0.634925
Report No.:AGC00377150606EH01 Page 174 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.6623 0.3937 0.2376 0.1497
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 175 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Tilt-Left(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Tilt-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Tilt-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-67.00
SAR 10g (W/Kg) 0.088199 SAR 1g (W/Kg) 0.135921
Report No.:AGC00377150606EH01 Page 176 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 0.1422 0.0944 0.0633 0.0435
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 177 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Touch-Right(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-47.00
SAR 10g (W/Kg) 0.296179 SAR 1g (W/Kg) 0.491455
Report No.:AGC00377150606EH01 Page 178 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4529 0.2442 0.1345 0.0803
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 179 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Tilt-Right(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Tilt-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Tilt-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-63.00, Y=-8.00
SAR 10g (W/Kg) 0.070846 SAR 1g (W/Kg) 0.109332
Report No.:AGC00377150606EH01 Page 180 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1143 0.0741 0.0483 0.0320
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 181 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Touch-Left(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-64.00
SAR 10g (W/Kg) 0.427271 SAR 1g (W/Kg) 0.732533
Report No.:AGC00377150606EH01 Page 182 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.7711 0.4612 0.2801 0.1777
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 183 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Tilt-Left(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Tilt-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Tilt-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-67.00
SAR 10g (W/Kg) 0.085635 SAR 1g (W/Kg) 0.131951
Report No.:AGC00377150606EH01 Page 184 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1381 0.0917 0.0616 0.0424
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 185 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Touch-Right(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-47.00
SAR 10g (W/Kg) 0.243496 SAR 1g (W/Kg) 0.403769
Report No.:AGC00377150606EH01 Page 186 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.3725 0.2011 0.1109 0.0663
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 187 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Tilt-Right(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Tilt-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Tilt-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-63.00, Y=-8.00
SAR 10g (W/Kg) 0.059881 SAR 1g (W/Kg) 0.092610
Report No.:AGC00377150606EH01 Page 188 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0968 0.0629 0.0410 0.0270
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 189 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Touch-Left(100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Touch-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Touch-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-64.00
SAR 10g (W/Kg) 0.434869 SAR 1g (W/Kg) 0.746492
Report No.:AGC00377150606EH01 Page 190 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.7859 0.4686 0.2839 0.1799
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 191 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Tilt-Left(100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Tilt-Left /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Tilt-Left /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-67.00
SAR 10g (W/Kg) 0.088300 SAR 1g (W/Kg) 0.136215
Report No.:AGC00377150606EH01 Page 192 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 0.1425 0.0943 0.0631 0.0433
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 193 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Touch-Right(100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Touch-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Touch-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-47.00
SAR 10g (W/Kg) 0.246973 SAR 1g (W/Kg) 0.410106
Report No.:AGC00377150606EH01 Page 194 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.3786 0.2041 0.1124 0.0670
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 195 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Tilt-Right(100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid- Tilt-Right /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid- Tilt-Right /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-50.00, Y=0.00
SAR 10g (W/Kg) 0.063682 SAR 1g (W/Kg) 0.097988
Report No.:AGC00377150606EH01 Page 196 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1023 0.0686 0.0463 0.0318
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 197 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Body-Back(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-5.00, Y=34.00
SAR 10g (W/Kg) 0.609931 SAR 1g (W/Kg) 1.009198
Report No.:AGC00377150606EH01 Page 198 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 1.0678 0.6718 0.4219 0.2670
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 199 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Body-Front(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=5.00, Y=34.00
SAR 10g (W/Kg) 0.712711 SAR 1g (W/Kg) 1.208467
Report No.:AGC00377150606EH01 Page 200 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 1.2791 0.7838 0.4822 0.3029
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 201 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Body-Front(1RB#0) –with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-5.00, Y=34.00
SAR 10g (W/Kg) 0.608259 SAR 1g (W/Kg) 1.007212
Report No.:AGC00377150606EH01 Page 202 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 1.0653 0.6680 0.4185 0.2649
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 203 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Body-Back(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-5.00, Y=34.00
SAR 10g (W/Kg) 0.488165 SAR 1g (W/Kg) 0.812929
Report No.:AGC00377150606EH01 Page 204 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 0.8601 0.5335 0.3319 0.2101
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 205 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Body-Front(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=5.00, Y=34.00
SAR 10g (W/Kg) 0.585980 SAR 1g (W/Kg) 0.994705
Report No.:AGC00377150606EH01 Page 206 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 1.0533 0.6449 0.3962 0.2484
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 207 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Body-Back(100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-5.00, Y=34.00
SAR 10g (W/Kg) 0.501054 SAR 1g (W/Kg) 0.830481
Report No.:AGC00377150606EH01 Page 208 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 0.8787 0.5512 0.3451 0.2178
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 209 of 337
Test Laboratory: AGC Lab Date: July 22,2015 LTE Band I Mid-Body-Front(100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band I ;Duty Cycle:1:1; Conv.F=4.12; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.38 mho/m; εr =41.17; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃):21.9, Liquid temperature (℃):21.5
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE BANDⅠMid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm
Configuration/LTE BANDⅠMid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BandⅠ
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=6.00, Y=34.00
SAR 10g (W/Kg) 0.601212 SAR 1g (W/Kg) 1.021443
Report No.:AGC00377150606EH01 Page 210 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 1.0800 0.6602 0.4050 0.2536
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 211 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Touch-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-66.00
SAR 10g (W/Kg) 0.133048
SAR 1g (W/Kg) 0.220107
Report No.:AGC00377150606EH01 Page 212 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2316 0.1459 0.0928 0.0607
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 213 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Tilt-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=35.00
SAR 10g (W/Kg) 0.029196
SAR 1g (W/Kg) 0.047691
Report No.:AGC00377150606EH01 Page 214 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0496 0.0330 0.0217 0.0141
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 215 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-53.00, Y=-72.00
SAR 10g (W/Kg) 0.129999
SAR 1g (W/Kg) 0.226692
Report No.:AGC00377150606EH01 Page 216 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2418 0.1452 0.0880 0.0552
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 217 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Tilt-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=10.00, Y=-10.00
SAR 10g (W/Kg) 0.019388
SAR 1g (W/Kg) 0.030335
Report No.:AGC00377150606EH01 Page 218 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0301 0.0205 0.0136 0.0088
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 219 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Touch-Left (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-66.00
SAR 10g (W/Kg) 0.140281
SAR 1g (W/Kg) 0.231363
Report No.:AGC00377150606EH01 Page 220 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2434 0.1539 0.0983 0.0645
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 221 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Tilt-Left (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=37.00
SAR 10g (W/Kg) 0.029976
SAR 1g (W/Kg) 0.048810
Report No.:AGC00377150606EH01 Page 222 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0508 0.0336 0.0220 0.0143
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 223 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Touch-Right (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-53.00, Y=-72.00
SAR 10g (W/Kg) 0.141052
SAR 1g (W/Kg) 0.245464
Report No.:AGC00377150606EH01 Page 224 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2618 0.1576 0.0958 0.0602
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 225 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Tilt-Right (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-39.00, Y=-56.00
SAR 10g (W/Kg) 0.022510
SAR 1g (W/Kg) 0.035022
Report No.:AGC00377150606EH01 Page 226 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0368 0.0246 0.0164 0.0109
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 227 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Low-Touch-Left (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1712.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Low- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Low- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE Band III
Channels Low
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-67.00
SAR 10g (W/Kg) 0.097314
SAR 1g (W/Kg) 0.161212
Report No.:AGC00377150606EH01 Page 228 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1703 0.1074 0.0684 0.0447
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 229 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Touch-Left (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-66.00
SAR 10g (W/Kg) 0.159963
SAR 1g (W/Kg) 0.263610
Report No.:AGC00377150606EH01 Page 230 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2775 0.1755 0.1123 0.0739
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 231 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III High-Touch-Left (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1782.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III High- Touch-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III High- Touch-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE Band III
Channels High
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-58.00, Y=-66.00
SAR 10g (W/Kg) 0.155557
SAR 1g (W/Kg) 0.256677
Report No.:AGC00377150606EH01 Page 232 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2699 0.1695 0.1080 0.0712
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 233 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Tilt-Left (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Tilt-Left/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Tilt-Left/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-64.00
SAR 10g (W/Kg) 0.036705
SAR 1g (W/Kg) 0.055061
Report No.:AGC00377150606EH01 Page 234 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0575 0.0393 0.0270 0.0187
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 235 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Touch-Right (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Touch-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Touch-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-51.00, Y=-72.00
SAR 10g (W/Kg) 0.159634
SAR 1g (W/Kg) 0.276447
Report No.:AGC00377150606EH01 Page 236 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2957 0.1803 0.1111 0.0706
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 237 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Tilt-Right (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid- Tilt-Right/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid- Tilt-Right/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-39.00, Y=-56.00
SAR 10g (W/Kg) 0.026928
SAR 1g (W/Kg) 0.041463
Report No.:AGC00377150606EH01 Page 238 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0436 0.0295 0.0200 0.0136
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 239 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Body-Back(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-1.00, Y=31.00
SAR 10g (W/Kg) 0.234850
SAR 1g (W/Kg) 0.382804
Report No.:AGC00377150606EH01 Page 240 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4051 0.2593 0.1663 0.1079
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 241 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Body-Front(1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-2.00, Y=31.00
SAR 10g (W/Kg) 0.242223
SAR 1g (W/Kg) 0.399591
Report No.:AGC00377150606EH01 Page 242 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4233 0.2686 0.1705 0.1094
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 243 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Body-Back(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=31.00
SAR 10g (W/Kg) 0.236243
SAR 1g (W/Kg) 0.386020
Report No.:AGC00377150606EH01 Page 244 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4085 0.2600 0.1661 0.1076
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 245 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Body-Front(50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-2.00, Y=31.00
SAR 10g (W/Kg) 0.253145
SAR 1g (W/Kg) 0.417705
Report No.:AGC00377150606EH01 Page 246 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4425 0.2804 0.1780 0.1144
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 247 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Body-Back(100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid-Body-back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid-Body-back /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=31.00
SAR 10g (W/Kg) 0.264235
SAR 1g (W/Kg) 0.430855
Report No.:AGC00377150606EH01 Page 248 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4558 0.2917 0.1868 0.1209
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 249 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Body-Front(100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-2.00, Y=31.00
SAR 10g (W/Kg) 0.282437
SAR 1g (W/Kg) 0.465665
Report No.:AGC00377150606EH01 Page 250 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4934 0.3138 0.1994 0.1277
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 251 of 337
Test Laboratory: AGC Lab Date: July 20,2015 LTE Band III Mid-Body-Front(100RB#0)-with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15
Communication System: LTE; Communication System Band: LTE Band III; Duty Cycle: 1:1; Conv.F=4.35 Frequency: 1747.5MHz; Medium parameters used: f = 1800 MHz; ζ= 1.42 mho/m; εr =40.47; ρ= 1000 kg/m³ ; Phantom section: Left Section
Ambient temperature (℃):21.8, Liquid temperature (℃):21.6
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.: SN 22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/LTE Band III Mid-Body-front /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/LTE Band III Mid-Body-front /Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm;
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE Band III
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=0.00, Y=31.00
SAR 10g (W/Kg) 0.262321
SAR 1g (W/Kg) 0.427903
Report No.:AGC00377150606EH01 Page 252 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4527 0.2893 0.1852 0.1200
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 253 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Touch-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-65.00
SAR 10g (W/Kg) 0.388690
SAR 1g (W/Kg) 0.710727
Report No.:AGC00377150606EH01 Page 254 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.7557 0.4279 0.2440 0.1451
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 255 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Tilt-Left (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-66.00
SAR 10g (W/Kg) 0.076100
SAR 1g (W/Kg) 0.129403
Report No.:AGC00377150606EH01 Page 256 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1350 0.0769 0.0444 0.0270
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 257 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Touch-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-62.00
SAR 10g (W/Kg) 0.367413
SAR 1g (W/Kg) 0.747632
Report No.:AGC00377150606EH01 Page 258 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.7939 0.3529 0.1506 0.0675
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 259 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Tilt-Right (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-19.00
SAR 10g (W/Kg) 0.045362
SAR 1g (W/Kg) 0.083621
Report No.:AGC00377150606EH01 Page 260 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0880 0.0460 0.0238 0.0127
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 261 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Touch-Left (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-65.00
SAR 10g (W/Kg) 0.330588
SAR 1g (W/Kg) 0.605045
Report No.:AGC00377150606EH01 Page 262 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.6434 0.3634 0.2070 0.1235
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 263 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Tilt-Left (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-65.00
SAR 10g (W/Kg) 0.082284
SAR 1g (W/Kg) 0.140675
Report No.:AGC00377150606EH01 Page 264 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1475 0.0840 0.0485 0.0293
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 265 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Touch-Right (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-62.00
SAR 10g (W/Kg) 0.302093
SAR 1g (W/Kg) 0.614657
Report No.:AGC00377150606EH01 Page 266 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.6532 0.2913 0.1247 0.0560
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 267 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Tilt-Right (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-19.00
SAR 10g (W/Kg) 0.037069
SAR 1g (W/Kg) 0.068417
Report No.:AGC00377150606EH01 Page 268 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0721 0.0374 0.0192 0.0102
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 269 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Low-Touch-Left (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2502.5MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Low-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Low-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND VII
Channels Low
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-65.00
SAR 10g (W/Kg) 0.452911
SAR 1g (W/Kg) 0.824580
Report No.:AGC00377150606EH01 Page 270 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.8761 0.4988 0.2863 0.1714
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 271 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Touch-Left (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-65.00
SAR 10g (W/Kg) 0.338619
SAR 1g (W/Kg) 0.619067
Report No.:AGC00377150606EH01 Page 272 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.6582 0.3730 0.2127 0.1264
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 273 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII High-Touch-Left (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2567.5MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII High-Touch-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII High-Touch-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND VII
Channels High
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-65.00
SAR 10g (W/Kg) 0.315365
SAR 1g (W/Kg) 0.577931
Report No.:AGC00377150606EH01 Page 274 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.6141 0.3453 0.1958 0.1162
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 275 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Tilt-Left (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Tilt-Left/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Tilt-Left/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-65.00
SAR 10g (W/Kg) 0.088641
SAR 1g (W/Kg) 0.151586
Report No.:AGC00377150606EH01 Page 276 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1590 0.0907 0.0522 0.0313
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 277 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Touch-Right (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Touch-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Touch-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-62.00
SAR 10g (W/Kg) 0.304644
SAR 1g (W/Kg) 0.619843
Report No.:AGC00377150606EH01 Page 278 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.6584 0.2928 0.1249 0.0559
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 279 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Tilt-Right (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Tilt-Right/Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Tilt-Right/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-80.00, Y=-19.00
SAR 10g (W/Kg) 0.037734
SAR 1g (W/Kg) 0.070181
Report No.:AGC00377150606EH01 Page 280 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0740 0.0377 0.0191 0.0102
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 281 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Body-Back (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-2.00, Y=-33.00
SAR 10g (W/Kg) 0.310229
SAR 1g (W/Kg) 0.539645
Report No.:AGC00377150606EH01 Page 282 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.5642 0.3138 0.1724 0.0959
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 283 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Body-Front (1RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-23.00, Y=-31.00
SAR 10g (W/Kg) 0.485598
SAR 1g (W/Kg) 0.851998
Report No.:AGC00377150606EH01 Page 284 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.8860 0.4956 0.2768 0.1594
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 285 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Body-Front (1RB#0) –with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-9.00, Y=-32.00
SAR 10g (W/Kg) 0.432864
SAR 1g (W/Kg) 0.753082
Report No.:AGC00377150606EH01 Page 286 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.7889 0.4459 0.2504 0.1432
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 287 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Body-Back (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-1.00, Y=-33.00
SAR 10g (W/Kg) 0.263046
SAR 1g (W/Kg) 0.457767
Report No.:AGC00377150606EH01 Page 288 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4802 0.2665 0.1464 0.0817
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 289 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Body-Front (50RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-7.00, Y=39.00
SAR 10g (W/Kg) 0.408701
SAR 1g (W/Kg) 0.744782
Report No.:AGC00377150606EH01 Page 290 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.7642 0.3995 0.2058 0.1089
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 291 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Body-Back (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-5.00, Y=-33.00
SAR 10g (W/Kg) 0.271689
SAR 1g (W/Kg) 0.477882
Report No.:AGC00377150606EH01 Page 292 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.4926 0.2690 0.1449 0.0792
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 293 of 337
Test Laboratory: AGC Lab Date: July 23,2015 LTE Band VII Mid-Body-Front (100RB#0) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band VII; Duty Cycle:1:1; Conv.F=3.79 Frequency: 2535MHz; Medium parameters used: f =2600 MHz; ζ=1.90 mho/m; εr =39.77; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 21.5, Liquid temperature (℃): 21.3
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN 04/13 EP165
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND VII Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND VII Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND VII
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-7.00, Y=39.00
SAR 10g (W/Kg) 0.410913
SAR 1g (W/Kg) 0.750224
Report No.:AGC00377150606EH01 Page 294 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.7703 0.4009 0.2056 0.1085
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 295 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Low-Touch-Left (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 834.5MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Low-Touch-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Low-Touch-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND XX
Channels Low
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-48.00
SAR 10g (W/Kg) 0.131867
SAR 1g (W/Kg) 0.186758
Report No.:AGC00377150606EH01 Page 296 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1954 0.1500 0.1142 0.0858
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 297 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Touch-Left (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Touch-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Touch-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-49.00
SAR 10g (W/Kg) 0.148636
SAR 1g (W/Kg) 0.212764
Report No.:AGC00377150606EH01 Page 298 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2233 0.1707 0.1291 0.0963
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 299 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX High-Touch-Left (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 859.5MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX High-Touch-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX High-Touch-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND XX
Channels High
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-57.00, Y=-49.00
SAR 10g (W/Kg) 0.113214
SAR 1g (W/Kg) 0.161160
Report No.:AGC00377150606EH01 Page 300 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1690 0.1300 0.0989 0.0741
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 301 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Tilt-Left (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Tilt-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Tilt-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-12.00, Y=-7.00
SAR 10g (W/Kg) 0.066939
SAR 1g (W/Kg) 0.089602
Report No.:AGC00377150606EH01 Page 302 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0928 0.0729 0.0573 0.0450
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 303 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Touch-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-61.00, Y=-71.00
SAR 10g (W/Kg) 0.100252
SAR 1g (W/Kg) 0.156924
Report No.:AGC00377150606EH01 Page 304 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1650 0.1111 0.0753 0.0518
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 305 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Tilt-Right (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Tilt-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Tilt-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-23.00, Y=7.00
SAR 10g (W/Kg) 0.070841
SAR 1g (W/Kg) 0.095532
Report No.:AGC00377150606EH01 Page 306 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0989 0.0771 0.0601 0.0469
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 307 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Touch-Left (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Touch-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Touch-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-48.00
SAR 10g (W/Kg) 0.140887
SAR 1g (W/Kg) 0.204076
Report No.:AGC00377150606EH01 Page 308 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2142 0.1613 0.1206 0.0893
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 309 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Tilt-Left (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Tilt-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Tilt-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-10.00, Y=-7.00
SAR 10g (W/Kg) 0.074048
SAR 1g (W/Kg) 0.099194
Report No.:AGC00377150606EH01 Page 310 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1026 0.0806 0.0633 0.0497
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 311 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Touch-Right (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-61.00, Y=-71.00
SAR 10g (W/Kg) 0.100240
SAR 1g (W/Kg) 0.156948
Report No.:AGC00377150606EH01 Page 312 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1651 0.1111 0.0753 0.0519
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 313 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Tilt-Right (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Tilt-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Tilt-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-23.00, Y=7.00
SAR 10g (W/Kg) 0.070947
SAR 1g (W/Kg) 0.095754
Report No.:AGC00377150606EH01 Page 314 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0992 0.0773 0.0602 0.0469
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 315 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Touch-Left (100RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Touch-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Touch-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Cheek
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-56.00, Y=-48.00
SAR 10g (W/Kg) 0.133318
SAR 1g (W/Kg) 0.193461
Report No.:AGC00377150606EH01 Page 316 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2031 0.1530 0.1143 0.0844
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 317 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Tilt-Left (100RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Tilt-Left /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Tilt-Left /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Left head
Device Position Tilt
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-11.00, Y=-8.00
SAR 10g (W/Kg) 0.067044
SAR 1g (W/Kg) 0.089907
Report No.:AGC00377150606EH01 Page 318 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0930 0.0729 0.0571 0.0448
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 319 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Touch-Right (100RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Touch-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Touch-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Cheek
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-61.00, Y=-71.00
SAR 10g (W/Kg) 0.100149
SAR 1g (W/Kg) 0.157071
Report No.:AGC00377150606EH01 Page 320 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1653 0.1108 0.0750 0.0516
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 321 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Tilt-Right (100RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Tilt-Right /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Tilt-Right /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Right head
Device Position Tilt
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-23.00, Y=6.00
SAR 10g (W/Kg) 0.070729
SAR 1g (W/Kg) 0.095675
Report No.:AGC00377150606EH01 Page 322 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.0993 0.0772 0.0601 0.0468
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 323 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Body-Back (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=15.00, Y=10.00
SAR 10g (W/Kg) 0.124283
SAR 1g (W/Kg) 0.175611
Report No.:AGC00377150606EH01 Page 324 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1816 0.1313 0.0948 0.0684
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 325 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Body-Front (1RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-15.00, Y=9.00
SAR 10g (W/Kg) 0.135811
SAR 1g (W/Kg) 0.192888
Report No.:AGC00377150606EH01 Page 326 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2000 0.1455 0.1055 0.0763
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 327 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Body-Back (1RB#0 ) –with earphone DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=-15.00, Y=10.00
SAR 10g (W/Kg) 0.136987
SAR 1g (W/Kg) 0.193020
Report No.:AGC00377150606EH01 Page 328 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1999 0.1466 0.1073 0.0783
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 329 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Body-Back (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=17.00, Y=9.00
SAR 10g (W/Kg) 0.116484
SAR 1g (W/Kg) 0.165616
Report No.:AGC00377150606EH01 Page 330 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1718 0.1244 0.0899 0.0647
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 331 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Body-Front (50RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=18.00, Y=-6.00
SAR 10g (W/Kg) 0.135240
SAR 1g (W/Kg) 0.195346
Report No.:AGC00377150606EH01 Page 332 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.2032 0.1464 0.1050 0.0747
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 333 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Body-Back (100RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Body-Back /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Body-Back /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Back
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=17.00, Y=9.00
SAR 10g (W/Kg) 0.110306
SAR 1g (W/Kg) 0.157224
Report No.:AGC00377150606EH01 Page 334 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1634 0.1183 0.0854 0.0613
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 335 of 337
Test Laboratory: AGC Lab Date: July 21,2015 LTE Band XX Mid-Body-Front (100RB#0 ) DUT: GSM /WCDMA/FDD-LTE Mobile Phone; Type: X15 Communication System: LTE; Communication System Band: LTE Band XX; Duty Cycle:1:1; Conv.F=5.03 Frequency: 847MHz; Medium parameters used: f = 835MHz; ζ=0.89 mho/m; εr =42.15; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (℃): 22.0, Liquid temperature (℃): 21.9
SATIMO Configuration:
• Probe: SSE5; Calibrated: 12/03/2014; Serial No.:SN22/12 EP159
• Sensor-Surface: 4mm (Mechanical Surface Detection)
• Phantom: SAM twin phantom
• Measurement SW: OpenSAR V4_02_01
Configuration/ LTE BAND XX Mid-Body-Front /Area Scan: Measurement grid: dx=8mm, y=8mm Configuration/ LTE BAND XX Mid-Body-Front /Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Area Scan sam_direct_droit2_surf8mm.txt
ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm
Phantom Validation plane
Device Position Body Front
Band LTE BAND XX
Channels Middle
Signal OFDM (Crest factor: 1.0)
SURFACE SAR VOLUME SAR
Maximum location: X=18.00, Y=-6.00
SAR 10g (W/Kg) 0.126262
SAR 1g (W/Kg) 0.182771
Report No.:AGC00377150606EH01 Page 336 of 337
Z (mm) 0.00 4.00 9.00 14.00 19.00
SAR (W/Kg) 0.0000 0.1904 0.1371 0.0981 0.0697
3D screen shot Hot spot position
Report No.:AGC00377150606EH01 Page 337 of 337
APPENDIX C. TEST SETUP PHOTOGRAPHS &EUT PHOTOGRAPHS
Refer to Attached files.
APPENDIX D. CALIBRATION DATA
Refer to Attached files.