sapa facades4 5 sapa facades facades adorn the rooms of the city multiple systems. a facade can...
TRANSCRIPT
Sapa FacadesBuilding systems for flexibility, function and aesthetics
2 3
2 3
More information about our products can be found on our website: sapabuildingsystem.seDetailed sections in .dwg and .dxf, specification texts, etc. are available for download.For more information find your local contact on our website.
Sapa Facades Contents
Facades adorn the rooms of the city 5
Energy efficient solutions – save, control and generate 6
Sapa Facades 10
Overview of Sapa Facades 10
Sapa Facade 4150 12
Sapa Facade 4150 SX 14
Sapa Facade 4150 EF and 4150 EF SX. Unitized curtain wall. 16
Sapa Facade 4150 SSG 20
Sapa Facade 5050 SG 22
Sapa Solar Shading 4550 24
Sapa Solar BIPV 26
Sapa Glazed Elements 3074, 3074 SX and 3050 28
Decorative profiles, framework profiles, windows and doors 30
Exterior decorative profiles Expressive 32
Exterior decorative profiles Add 34
Exterior decorative profiles Optima 36
Interior framework profiles 38
Sapa Doors and Sapa Windows 40
Glass filling for facades 42
Surface treatment and colour 44
Where to find us 46
Architect Support 46
sapabuildingsystem.se
4 5
Sapa Building System AB is the leading Nordic supplier of aluminium-based building systems. Our systems have been developed for the harsh Nordic climate, Nordic building standards and market demands. Our range includes facades, doors, windows, glazed roofs, solar shading and building integrated photovoltaic.
Recycling of aluminium is an energy-lean process. Approximately 50% of Sapa’s total production is based on recycled aluminium.
4 5
Sapa Facades
Facades adorn the rooms of the city
Multiple systems. A facade can portray different expressions by using our solutions to meet the various aesthetic and functional demands. We have systems for multiple solutions – choose a system based on your project and your wishes.
P-marking. Our building systems fulfil the demands for P-marking*, which includes quality assurance of design, manufacture and installation of windows, doors, wall and roof elements of glass and metal.
Swedish tradition. Our building systems are developed for the Nordic climate, building standards and market demands, in close cooperation with architects and our manufacturers. 40 years of continuous improvement has resulted in flexible and rational solutions, systems with great potential for architectural expression and reliable function, for flexible assembly, rational manufacture and for minimum maintenance. Our product development is driven with a focus on manufacturability, simplicity, economy, function and design.
Save, control and generate energy. Energy conservation is the basis of our range. Our systems make it easy to design modern houses that fulfil high demands.
Easy to combine systems. We have a large range of windows, doors and sliding doors that can be simply and elegantly integrated in our facade systems.
* A swedish product quality label sponsored SP (Technical Research institute of Sweden)
6 7
Amongst the new guidelines that will set the standards in both existing and new buildings, LEED, BREEAM and Green Building are important concepts for the future. Our systems are particularly suited to these new environmental classifications. The illustration shows an office building in Malmö, Sweden with Sapa Facade system 4150. The building is certified according to Green Building.
Energy-efficient solutionsThe Sapa building systems make it easy to design modern houses that fulfil high demands. We have considered every aspect and offer flexi-ble systems where one can easily integrate solar shading and solar cells in a facade to achieve a total solution with good energy conservation.
Save, control and generate energy. Our products are developed with a focus on energy conservation and can easily be combined in an aesthetic and functional way that gives you the potential to build modern and energy efficient.
Sapa Facade system SX
SX is the designation of a system with high insulation properties, using amongst other things, specially de-signed isolators with multi-chamber systems.
Sapa Solar Shading
Limit sunlight and retain the view with our exterior solar shading for a better indoor climate.
Sapa Solar BIPV
Our system for utilising solar energy. The system is built up with photovoltaic cells that are integrated into our facade system.
Save Control Generate
6 7
Gröna skrapan (the Green scraper) in Gothenburg, Sweden, is an EC marked GreenBuilding and is also certified according to LEED platinum.
Custom built project solutions. Building for energy efficiency requires a comprehensive view of the facade. In this section we present project solutions and standard solutions with a focus on energy conservation. Working with project adaptation generates solutions outside our stan-dard range, but at the same time forms the basis for our future product development.
Energy and project adaptationOur standard range can manage most situations. But some projects have specific demands and for these we offer a project solution. The cooperation between architects, our designers and manufacturers creates new custom built solutions that are based on our standard range.
8 9
VAT 83, multi-user building, Søborg, Copenhagen, Denmark. Architect: PLH Arkitekter a/s.Energy efficient offices with natural ventilation. Our standard systems for facades, windows, doors and glazed roofs are included in the project. Facades: Sapa 4150. Windows: Sapa 1074. Doors: Sapa 2074. Glazed roof: Sapa 5050.
Marienlyst children’s school, Drammen, Norway. Architect: Div.A Arkitekter MNAL.The school was built according to the standard for passive buildings. Our standard systems for faca-des, windows, doors and glazed roofs are included in the project. Facade: Sapa 4150 SX. Internal glazed elements: 3050 E30. Doors: Sapa 2050, 2074, 2050 E30, 2074 EI 30. Windows: Sapa 1074 SX. Glazed roof: Sapa 5050.
Natural ventilation
Passive house standard
8 9
Science and Innovation centre in Sarpsborg, Norway. Architect: AART architects A/S, Danmark.Our standard systems for facades, BIPV, doors and windows are included in the project. Facades: Sapa 4150 SX with BIPV, Sapa 3074. Sapa 3050 interior. Doors: Sapa 2050 and 2074. Windows: Sapa 1074 SX, inward opening.
Passive house standard
Gröna skrapan (Green scraper), Gothenburg, Sweden. Architect: White arkitekter AB.Gröna skrapan (the Green scraper) in Gothenburg, Sweden, is an EC marked GreenBuilding and is also certified according to LEED platinum. Both standard systems and project-adapted solutions are included in the project. Facades: Sapa 4150 SX and project-adapted solutions for the shell facade.
EC GreenBuildingLEED platinum
10 11
Facade system Overview table
page 12 page 14 page 16 page 20 page 22 page 28 page 28 page 28
Sapa Facade system 4150 4150 SX 4150 EF/4150 EF SX 4150 SSG 5050 SG 3074 3074 SX 3050
Technical building principle
Partition between slabs • •Curtain wall • • • • •Cold facade •Double-shell facade • • • •Element building system partially partially • partially partially
Exterior glazed sections • • • • • •Interior glazed sections • •Decorative profile
Add • •Expressive • • partially
(not element pitch)
Optima only vertically only vertically •Mullion and transom profiles
Rectangular width/depth 50/35-300 mm 50/35-300 mm 50-70/120-140 mm 50/35-300 mm 50/60-180 mm 52-224/74-138 mm 52-89/74-106 mm 52-250/50 mm
I-profile width/depth 50/100-140 mm 50/100-140 mm 50/100-140 mm 50/140 mm
T-profile width/depth 50/115-175 mm 50/115-175 mm 50/115-175 mm 50/135 mm
Glass choice/filling choice
Single glass 4-10 mm 6-11 mm 5-13 mm 3-20 mm
Insulating glass 23-48 mm 33-56 mm 27-56 mm • 26-41, 46-51 mm 20-54 mm 20-54 mm 20-33 mm
Full filling • • • • 20-54 mm 20-54 mm 20-33 mm
Vakupanel (Vacuum panel) • • • • • •Performance
Watertightness accord EN 12154/EN 12208 Class R7/Class 9A Class R7/ - Class RE 1500/ - Class RE 1200/ - - /Class E750 - /Class 9A - /Class 9A
Airtightness accord EN 12152/EN 12207 Class A4/Class 4 Class A4/ - Class AE 900/ - Class A4/ - - /Class 4 - /Class 4 - /Class 4
Wind load resistanceaccord EN 13116/EN 12211
Design wind load 2000 Pa
(L/200, max 15 mm)
Design wind load 2000 Pa
(L/200, max 15 mm)
Design wind load 2000 Pa
(L/200, max 15 mm)
Design wind load 2000 Pa
(L/200, max 15 mm)
Class 3, (L/200, max 15 mm)
Class 3, (L/200, max 15 mm)
Class 3, (L/200, max 15 mm)
Impact resistance accord EN 14019 Class I5/E5 Class I5/E5 Class I5/E5
Burglar resistance accord EN 1627/SS 817345 S1, S2 MK2
Fire protection accord BBR 5:231 E30, EI15, EI30 E30, EI15, EI30, EI60 E30
Weight individual glass area max 250 kg 500 kg 250 kg 250 kg 150 kg 170 kg 170 kg
Complement
Window 1074 inward/outward opening • • Inward opening •Window 1074 SX, inward opening • • • •Window 4074 outward opening • • • • •Door 2074 • • • • • •Door 2060 • • •Door 2050 • •Sliding door 2050 • • • • • •Solar shading 4550 • •Solar BIPV • •
10 11
www.sapabuildingsystem.seOur homepage has a comprehensive project planning support in the form of product data and downloadable details.
Drawings Elevations and details Profile breakdowns Drawing texts
Functions and performance U-coefficient glazed facades U-coefficient filling
Dimensioning Glass Openable units Facade complements
We have even collected together inspiration, advice and tips for the creative phase.
U-value The U-coefficient for all facade systems (heat transfer) is calculated according to EN 13947.The U-coefficient for the whole facade should be given, Ucw Our homepage has tables showing the total U-coefficient for different types of glass and spacing strips. The calculations are based on the calculation standard for Curtain Wall EN 13947:2006.
Sound reduction Sound reduction is measured according to EN ISO 717-1. The sound insulation in a building is described with a sound reduction figure and is given in dB. Sound class or Rw or Rw+Ctr is usually given. Rw is an average value based on the experience of sound.Rw+Ctr takes the spectrum for town traffic into consideration.
Quality assurance P-marking. Our building systems fulfil the demands for P-marking, which includes quality assurance of design, manufacture and installation of windows, doors, wall and roof elements of glass and metal.
CE-marking. Our licensed manufacturers are responsible for manufacture, assembly and that the completed product fulfils the perfor-mance that is declared by the CE marking.
More detailed information about P-marking and CE marking can be found on our website.
page 12 page 14 page 16 page 20 page 22 page 28 page 28 page 28
Sapa Facade system 4150 4150 SX 4150 EF/4150 EF SX 4150 SSG 5050 SG 3074 3074 SX 3050
Technical building principle
Partition between slabs • •Curtain wall • • • • •Cold facade •Double-shell facade • • • •Element building system partially partially • partially partially
Exterior glazed sections • • • • • •Interior glazed sections • •Decorative profile
Add • •Expressive • • partially
(not element pitch)
Optima only vertically only vertically •Mullion and transom profiles
Rectangular width/depth 50/35-300 mm 50/35-300 mm 50-70/120-140 mm 50/35-300 mm 50/60-180 mm 52-224/74-138 mm 52-89/74-106 mm 52-250/50 mm
I-profile width/depth 50/100-140 mm 50/100-140 mm 50/100-140 mm 50/140 mm
T-profile width/depth 50/115-175 mm 50/115-175 mm 50/115-175 mm 50/135 mm
Glass choice/filling choice
Single glass 4-10 mm 6-11 mm 5-13 mm 3-20 mm
Insulating glass 23-48 mm 33-56 mm 27-56 mm • 26-41, 46-51 mm 20-54 mm 20-54 mm 20-33 mm
Full filling • • • • 20-54 mm 20-54 mm 20-33 mm
Vakupanel (Vacuum panel) • • • • • •Performance
Watertightness accord EN 12154/EN 12208 Class R7/Class 9A Class R7/ - Class RE 1500/ - Class RE 1200/ - - /Class E750 - /Class 9A - /Class 9A
Airtightness accord EN 12152/EN 12207 Class A4/Class 4 Class A4/ - Class AE 900/ - Class A4/ - - /Class 4 - /Class 4 - /Class 4
Wind load resistanceaccord EN 13116/EN 12211
Design wind load 2000 Pa
(L/200, max 15 mm)
Design wind load 2000 Pa
(L/200, max 15 mm)
Design wind load 2000 Pa
(L/200, max 15 mm)
Design wind load 2000 Pa
(L/200, max 15 mm)
Class 3, (L/200, max 15 mm)
Class 3, (L/200, max 15 mm)
Class 3, (L/200, max 15 mm)
Impact resistance accord EN 14019 Class I5/E5 Class I5/E5 Class I5/E5
Burglar resistance accord EN 1627/SS 817345 S1, S2 MK2
Fire protection accord BBR 5:231 E30, EI15, EI30 E30, EI15, EI30, EI60 E30
Weight individual glass area max 250 kg 500 kg 250 kg 250 kg 150 kg 170 kg 170 kg
Complement
Window 1074 inward/outward opening • • Inward opening •Window 1074 SX, inward opening • • • •Window 4074 outward opening • • • • •Door 2074 • • • • • •Door 2060 • • •Door 2050 • •Sliding door 2050 • • • • • •Solar shading 4550 • •Solar BIPV • •
12 13
Sapa 4150 is easy to install and offers great freedom of design and various functions. The facade can be designed as a facade performed as a self-supporting curtain wall, facade performed as partition between slabs, cold facade or double-skin facade. The rebate is suit-able for double or triple glazing units with thickness up to 48 mm.
The system is single pane ventilated/ drained, i.e. each glass pane or filling pane is ventilated and drained separately which reduces the risk of condensation damage, leakage and cooling of the mullions. In addition, the system is produced with two-step sealing where the external sealing strip functions as a ”raincoat” and the internal sealing strip constitutes the main seal (air/water).
The system is flexible and can easily be integrated with our door systems, window systems, solar shading and solar cells. There is even a wide range of interior mullions/transoms and exterior decorative profiles for greater freedom of design.
Facade system
Sapa Facade 41504150 is a very flexible insulated facade system with two-stage sealing. The system offers a large degree of choice with its wide range of exterior decorative profiles and interior mullions/transoms.
Facade system 4150 with decorative profile 42227, powder coated RAL 7035 light grey.
12 13
35
120
60
80
100
140
160
180
300
0
41 -
59
20
50
Fasad 4150 med T-formad profil
Fasad 4150 med I-formad profil
Fasad 4150 med rektangulär profilform
Fasad 4150 med delningsprofil
35
120
60
80
100
140
180
0
41 -
59
20
50
35 35
115
135
175
0
41 -
59
20
41 -
5920
50 50
0
120
100
140
??
Kristianstad Arena with Sapa Facade 4150.
4150, insulated profiles for double or triple glazing units
4150 is available in variants for fire protection classes E 30, EI 15 and EI 30.The same profile can be used both vertically and horizontally, which allows optimum material usage.Easy installation simplifies the building process. Glazing is always done from the outside of the construction.
4150 with rectangular mullion/transom
4150 with split mullion
4150 with T-shaped mullion/transom
4150 with I-shaped mullion
14 15
Sapa 4150 SX is easy to install and offers great freedom of design and various functions. The facade can be designed as a facade performed as self-supporting curtain wall, facade performed as partition between slabs, or double-skin facade. The rebate is suitable for triple glazing units with thickness up to 56 mm.
The system is single pane ventilated/ drained, i.e. each glass pane or filling pane is vented and drained separately which reduces the risk of condensation damage, leakage and cooling of the mullions. In addition, the system is produced with two-step sealing where the exter-nal sealing strip functions as a ”raincoat” and the internal sealing strip constitutes the main seal (air/water).
The system is flexible and can easily be integrated with our door systems, window systems, solar shading and solar cells. There is even a wide range of interior mullions/ transoms and exterior decorative profiles for greater freedom of design.
Facade system
Sapa Facade 4150 SXThe SX thermal break in 4150 SX is specially designed with a multi- chamber system that provides high insulating characteristics. The system provides the right conditions for energy efficient solutions for your project.
Facade system 4150 SX with decorative profile Expressive 42695 vertical, 68823 horizontal, anodised with “stainless look”.
14 15
35
60
80
100
Fasad 4150 SX med I-formad profil
Fasad 4150 SX med rektangulär profilform
Fasad 4150 SX med delningsprofil
35
35
50
0
51 -
67 20
50
0
51 -
67 20
Fasad 4150 SX med T-formad profil
35
50
0
51 -
67 20
50
0
51 -
67 20
120
140
160
180
300
120
60
80
100
140
180
120
100
140
115
135
175
?
4150 SX, highly insulated profiles
A thermal analysis photo displays the high degree of heat insulation
Facade 4150 SX with rectangular mullion/transom
Facade 4150 SX with split mullion
Facade 4150 SX with T-shaped mullion/transom
Facade 4150 SX with I-shaped mullion
The same profile and can be used both vertically and horizontally, which gives better material usage. Easy installation simplifies the building process. Glazing is always done from the outside of the construction.
Sapa 4150 SX at Science and Innovation centre in Sarpsborg, Norway.
16 17
The facade system makes it easy to integrate products such as opening units, filling and low-emission insulated glazing. The design is extremely well insulated and is available in ver-sions with standard insulation 4150 EF and extra insulation 4150 EF SX. Both are compatible with facade systems 4150 and 4150 SX. The glazing strips are chamfered for water diversion.
The solution is ideal for narrow complex building sites since no place for temporary storage of material is required, the elements can often be lifted directly from the transport truck for rational and flexible installation.
Our new 4150 EF, unitized curtain wall system, has been developed for prefabrication of facade elements. The advantage with element facades is better control during the manufacturing process and rational installation without scaffolding on large or complex building projects.
Facade system
Sapa Facade 4150 EF and 4150 EF SX
Facade system 4150 EF, anodised profiles.
16 17
1
23 4
120
0
140120
0
140
120
0 140
120
0 140 120
0 140
120
0 140
120
0
140
120
0
140
120
0
140120
0
140
120
0 140
120
0 140 120
0 140
120
0 140
120
0
140
120
0
140
120
0
140120
0
140
120
0 140
120
0 140 120
0 140
120
0 140
120
0
140
120
0
140
120
0
140120
0
140
120
0 140
120
0 140 120
0 140
120
0 140
120
0
140
120
0
140
120
0
140120
0
140
120
0 140
120
0 140 120
0 140
120
0 140
120
0
140
120
0
140
120
0
140120
0
140
120
0 140
120
0 140 120
0 140
120
0 140
120
0
140
120
0
140
120
0
140120
0
140
120
0 140
120
0 140 120
0 140
120
0 140
120
0
140
120
0
140
120
0
140120
0
140
120
0 140
120
0 140 120
0 140
120
0 140120
0
140
120
0
140
Mullions/ Transoms with 120 or 140 mm profile depth.The visible profile width is 70 mm at the element joint and 50 mm at the intermediate mullions/ transoms.A rebate for double or triple glazing units allows a glass thickness for 4150 EF of 27-48 mm and for 4150 EF SX of 33-56 mm. Traditional mineral wool filling or alternately VakuPanel (vacum panel) with a U-coefficient down to 0.17 W/m2K. Each glazed unit is drained and ventilated separately. There is a very efficient 3-stage rubber strip seal between the ele-ments. This seal reduces the need for butyl sealing and therefore simplifies installation and assembly considerably. Straight cuts allow easier manufacture and easier glass replacement.
2 - Horizontal profile
2 - Horizontal profile
4150 EF
4150 EF SX
4 - Vertical profile
4 - Vertical profile
1 - Horizontal element joint
1 - Horizontal element joint
3 - Vertical element joint
3 - Vertical element joint
18 19
18 19
The facade is manufactured at the factory as ready to install elements. The elements are completed with glass and finishing outer layer on both outside and inside. The element is hung up on an installation bracket mounted on the edge of the floor. A 3-step rubber strip seals between the elements.
Installation at the building site is fast and a completed facade emerges as the elements are mounted in place. The elements are lifted in place with a builder’s crane or a mobile crane. No scaffolding is required since the installers stand on the floor. The facade element itself can be used as a protective barrier due to its construction.
The solution is ideal in narrow and complex building sites since there is no need for inter-mittent storage of material. The elements are often lifted directly from the transport truck to the installers.
Sapa Facade 4150 EF and 4150 EF SXBuilding with prefabricated facade elements
20 21
Sapa 4150 SSG (Structural System Glazing) gives the facade a flat surface since the system has no external glazing profiles and is sealed with joint sealant between the glass units.
Facade system
Sapa Facade 4150 SSG
4150 SSG is built on 50 mm wide aluminium profiles and a double or triple glazing units with warm edge. The glass pane is mechanically anchored in the framework profile with mounting brackets. The glass and weather proofing become a watertight construction, so the system only requires ventilation. The internal sealing strip forms the air seal. The inner sealing strip and the construction of the thermal break optimise insulation in the profiles.
4150 SSG is an entirely glass solution and can be installed as a facade performed as self-supporting curtain wall, or double skin facade.
The system even comprises openable units that can be easily integrated.
Facade system 4150 SSG, anodised profiles.
20 21
??
35
60
80
100
Fasad 4150 SSG med I-formad profil
Fasad 4150 SSG med rektangulär profilform
Fasad 4150 SSG med delningsprofil
35
35
Fasad 4150 SSG med T-formad profil
35
120
140
160
180
300
120
60
80
100
140
180
120
100
140
115
135
175
0
20 20 20 20
50
48/5
9
min 6
0
50
0
50
0
50
48/5
9
min 6
48/5
9
min 6
48/5
9
min 6 22 22 22 22
Rebate for double or triple glazing units. For double glazing up to 36 mm (excl. outer glass), internal glass thickness 4-9 mm or 14-16 mm. For triple glazing up to 52 mm (excl. outer glass).The same profile can be used both verti-cally and horizontally, which gives better material usage. Glazing is always done from the outside of the construction.
Facade system 4150 SSG at AGA factory on Lidingö, Stockholm.
4150SSG with rectangular mullion/transom
4150 SSG with split mullion
4150 SSG with T-shaped mullion/transom
4150 SSG with I-shaped mullion
4150 SSG for double or triple glazing units.
22 23
5050 System Glazing is a classic solution but has an external glass holder that is only 32 mm wide. The smart glass holders provide optimal glass surface. The system is based on our glass roof system with advantages such as simple installation and good sealing.
Facade system
Sapa Facade 5050 SG
5050 SG consists of insulated 50 mm wide aluminium profiles. The external glass holder is only 32 mm wide but the interior framework profiles are 50 mm wide. The external glass holder is installed with countersunk screws that can even be concealed with a decorative profile.
5050 SG should be constructed as a facade performed as self-supporting curtain wall or double-skin facade. The system has a rebate for double or triple glazing units. Standard sealed insulated glass is used for a cost-effective solution.
Drainage and ventilation are provided via the mullion. The internal sealing strip forms the air seal. The interior profiles have a rectangular shape, various types of decorative profiles are available. The system can easily be complemented with opening units.
Facade system 5050 SG, powder coated RAL 7043, anodised profiles.
22 23
??
100
60
140
180
160
5032
37/5
1/61
10
140
220
100
60
0
10
3250
32
5825 98 138
158
50
010
37/5
1/61
37/51/61
100
60
140
180
160
5032
37/5
1/61
10
140
220
100
60
0
10
3250
32
5825 98 138
158
50
010
37/5
1/61
37/51/61
100
60
140
180
160
5032
37/5
1/61
10
140
220
100
60
0
10
3250
32
5825 98 138
158
50
010
37/5
1/61
37/51/61
50 mm mullion Transom 50 mm Split mullion 50 mm
Facade system
Sapa Facade 5050 SG Rebate for double or triple glazing units.The same decorative profile can be used both vertically and horizontally. Easy installation simplifies the building process. Glazing is always done from the outside of the construction.
Södertörns University with Sapa Facade 5050 SG, Stockholm.
5050 SG, insulated profiles for double or triple glazing units
24 25
Function and form become one with the architecture. Our exterior solar shading reduces a building’s cooling requirements. The system comprises three types of blind; Bow, Wing and Box, which gives you great freedom in the choice of form and function. The solar shading complements our 4150/4150 SX facade system in a simple and aesthetic way.
Controlling energy
Sapa Solar Shading 4550
We have solutions for visually unbroken solar shading and for clearly marked sectional divi-sions. By using our design profile program, the character of the carrier profile can be reinfor-ced to coordinate with the architecture of the building. Our Add bracket system simplifies attachment of solar shading to the facade. Our solar shading is also available with motorised control via an external solution, for optimised control of sunlight and energy.
24 25
Controlling energy
Sapa Solar Shading 4550
Implementation. Solar shading can be implemented as either hori-zontal or vertical blinds, and the latter also with lying or standing blinds.
Installation. Self-supporting blinds or as a secondary construction on other supporting framework. Mounting bracket for installa-tion at angles of 0°, 15°, 30° and 45° respectively.
Blind profiles. Bow, Wing or Box with depths of 190 or 300 mm respectively.
Sapa Solar Shading Aero 4550 is our latest project solution. It consists of solar shading with built-in photo-voltaic solar cells.
Control of solar radiation
Box solar shading on Sapa Facade 4150 at Farris Bad, Norway
26 27
01
02
03
04
01
01
01
01
04
02
02
03
01
Sapa Solar BIPV, Building Integrated Photovoltaic, opens the door for modern building technology. The large range of shapes, colours and optical structures that solar cells provide together with the glass and profiles gives you the possibility to create energy-effective, innovative and environmentally aware projects.
Generate energy
Sapa Solar BIPV
Sapa Solar BIPV is our system for harnessing solar energy. The system consists of solar cells that are included in a double or triple glazed transparent insulated window, or alternately an opaque single glass in the breastwork or solar shading. The solar cell glass can easily be inte-grated in Sapa Glazed Roof 5050 and Facade 4150/4150 SX, or in the solar shading. This is a complete system solution with associated electrical components.
Transparent insulated glass, safety glass
Transparent insulated glass
Opaque single glass
Transparent single glass, safety glass
26 27
Sapa Solar BIPV includes cell technology based on monocrystalline, multi-crystalline or thin-filmBIPV = Building Integrated Photovoltaic
Examples of Sapa Facade 4150 with BIPV in different variants
Transparent insulated glass. Thin-film.The illustration shows a transparency of 20%.
Opaque facade glass. Thin-film.
Transparent insulated glass. Multi-crystalline. Transparency dependant on distribution of cells.
Opaque facade glass. Monocrystalline.
Generate energy
Sapa Solar BIPV
28 29
Glazed sections
Sapa Glazed Elements 3074, 3074 SX and 3050
Exterior and interior glazed elements for light and sight. Glazed element 3074 is available in several fire resistant classes.
3074 Glazed elements consist of insulated, 74-138 mm deep aluminium profiles. 3074 SX Glazed sections consist of extra insulated, 74-106 mm deep aluminium profiles. Glazing is performed from the inside with glazing beads. The outer and inner weather sealings has straight edges for optimum glass day light.
The system is single pane ventilated/drained, which means that each pane/filling is venti-lated/drained separately. In addition, the system is produced with two-step sealing where the external sealing strip functions as a ”raincoat” and the internal sealing strip constitutes the main seal (air/water).
Our variant for internal glazed elements is system 3050, non-insulated, 50 mm deep aluminium profiles. Glazing is performed from the inside with glazing beads.
Glazing element 3074, powder coated
28 29
3074 insulated profilesFramework profiles 74-138 mm profile depth and 52-224 mm profile width. Single glass: 5-13 mm. Double glazing and triple glazing: 20-54 mm. Full filling: external outer layer of sheet metal/facade glass, internal outer layer of sheet metal/board material. Fire protection class E 30, EI 15, EI 30 and EI 60. The variant is available with design glazing beads for symmetrical positioning of the glass. Double glazing: thickness 20-30 mm.
3074 SX insulated profiles Framework profiles 74-106 mm profile depth and 52-89 mm profile width. Double glazing and triple glazing: 20-54 mm. Full filling: external outer layer of sheet metal/facade glass, internal outer layer of sheet metal/board material.
3050 non-insulated profiles for interior solutions Framework profiles 50-120 mm profile depth and 52-250 mm profile width. Single glass: 3-20 mm. Double glazed: 20-33 mm.
The variant is available with design glazing beads for symmetrical positioning of the glass. Single glass: 5-10 mm.
Marienlyst children’s school, Drammen, Norway. Interior glazed elements 3074, fire resistance class E 30.
30 31
Complete facade systems
Design and functionDecorative profiles, mullions/ transoms, windows and doors
30 31
Complete facade systems
Design and function
32 33
Decorative profile Expressive horizontal as an accent to both colour and shape.
32 33
Expressive decorative profile 68819 in combination horizontal and vertical.
Expressive decorative profile 68822 in combined with 42227 vertical.
Expressive decorative profile 42678.
Expressive decorative profile 42694 horizontal combined with 42227 vertical.
Expressive decorative profile 42693 horizontal combined with 68823 vertical.
Expressive decorative profile 42813 horizontal combined with 42811 vertical.
Exterior decorative profiles for 4150 and 4150 SX
ExpressiveExpressive gives you as the creator, greater freedom to allow light and shade play across the facade. Give the facade a direction, reinforce sections and elements, combine with colourisation and surface treatment. Expressive decorative profiles can also be combined with profiles from our decorative families Add and Optima. You can also produce your own profile design if you want to.
34 35
Solar Shading Box installed with decorative profile Add creates a smart and simple installation on the facade.
34 35
Drain pipes and gutters are connected to Add 42693 with adapted brackets.
Lightning conductor cable connected to Add 42693 with a simple flexible connection.
Add 42693 connected to solar shading and solar screens using adapted brackets, see chapter Solar Shading.
Add basic decorative profile 42693. Countersunk screws.
Add basic decorative profile 42697 complemented with coloured profile to enhance the facades subdivision and direction.
Exterior decorative profiles for 4150 and 4250 SX
Add Add is a flexible bracket system for attaching solar shading, lightning conductors, drain pipes, gutters, signboards, lighting, etc. Add profiles can also be used to advantage together with decorative profile family Expressive. The characteristic groove of this profile can be used to enhance the framing of each glass unit to achieve a “picture frame” effect.
Add basic decorative profile 42693 with mitred connections in the horizontal and vertical profiles, ”Picture frame”.
36 37
Optima 42653 gives a narrow exterior profile width, here in combination with stepped glass in the corner.
36 37
Optima 42651 horizontal combined with 42653 vertical, fixed with visible screws in stainless or black oxidized variant, c/c 200 mm.
Optima 42844/42845, concealed attachment horizontally combined with Expressive 68821 vertical.
Optima 42844/42845 horizontal and vertical. Concealed attachment of the profile which is anodised in “stainless look” colour.
Optima 42653 horizontal and vertical, fixed with visible screws in stainless or black oxidized variant, c/c 200 mm.
Exterior decorative profiles for 5050 SG
OptimaOptima offers different design possibilities with visible or concealed fixings. Black surface treat-ment is a common combination with covers that are only 32 mm wide. Optima decorative profiles can also be combined to advantage with Expressive. You can also produce your own profile design if you want to.
Optima 42844/42845. Concealed attachment. Powder coated black.
Optima 42844/42845, vertical combined with Expressive 68823 horizontal.
38 39
High, grey painted rectangular mullions create an exciting interior at Farris Bad, a Hotel centre and Spa in Larvik, Norway.
38 39
Rectangular profiles, T or I shape. You can also combine the different shapes to achieve a desired expression. By choosing two different depths, the connection is often softer and more stylish.
T-shaped mullions/transoms are available in several different depths. Why not combine different profile depths on mullions and transoms?T-profiles are available for 4150, 4150 SX and 4150 SSG.
Rectangular mullions/transoms are available in several different depths.Why not combine different profile depths on mullions and transoms? Rectangular shape is available for all systems.
Rectangular mullions/transoms are available in several different depths.The example shows a combination of rectangular and T-shaped profiles.
I-shaped mullions are available in several different depths. Why not combine different profile depths or combine with a horizontal rectangular or T- shaped profile?I-profiles are available for 4150, 4150 SX and 4150 SSG.
Sapa Facades
Interior mullions and transoms
40 41
The opening units in a facade must fulfil high demands on both functionality and appearance. We have developed windows with different design and functional solutions for comfort ventilation, smoke ventilation and evacuation. Windows can be complemented with mechanical or automatic closing fittings.
Our building system for doors has a wide range of uses with possibilities for many functions. Our door solutions suit offices, hospitals, schools and universities, homes, industries, administrations, sport halls, exhibition centres, arenas and shopping malls.
Sapa Facades, opening units
Doors and windows
3050 with door 20503074 with door 2074
4150 with door 2074 4150 SX with door 2074 5050 SG with door 2074
Doors
Sizes. We do not have modular sizes that limit your choice.
Functionally adapted for safety and security, fire and evacuation, free opening size, stability, fittings, filling, glass, etc.
Choose your design via profile type, surface treatment, fittings, propor-tions and material choice, glass or filling, etc.
Products Openable units: Doors
2050 Door
2060 Door
2074 Door
2050 Sliding door
Other
4150 • • • •4150 SX • •4150 SSG • •4150 EF •5050 SG • •3050 • • •3074 • • •3074 SX only fixed sections
40 41
Sapa Facades, opening units
Doors and windows
Products Openable units: Windows
1074 inward
1074 outward
1074 SX inward
4074 outward
1050 inward
4150 • • • •4150 SX • • • •4150 SSG •4150 EF • • •5050 SG •3050 •3074 • •3074 SX •
4150 with outward opening window 1074.
3050 with inward opening window 1050.
4150 with inward opening block window 1074.
3074 with inward opening window 1074.
4150 with outward opening facade window 4074.
4150 SSG with outward opening facade window 4074.
4150 with inward opening window 1074.
5050 SG with outward opening facade window 4074.
Windows
4150 SX with inward opening window 1074 SX.
42 43
42 43
Filling 4150 SX
Glass 4150 SX
Sapa Facades and Glazed Elements
Fillings and glassChoice of glass. There are different alternatives, depending on the comfort and energy demands. Profiles that have space for insulated triple glazing naturally give the greatest free-dom of glass choice. There are several different types of glass for functions such as personal safety, burglary protection, fire protection, sound deadening, dirt repulsion, solar protection and energy saving. You can even screen print on glass in various patterns or use coloured glass.
Things to think about. Glass surfaces that are unprotected and positioned so that people can come in contact with them, must be designed so that the risk for personal injury is limited. Such glass surfaces must be dimensioned for the dynamic influence of a person. Adhere to applicable standards and demands.
Choice of filling. Certain parts of an element can or must be fitted with fillings. It is im-portant to consider the material and outer surface of these. If the filling is subject to heavy blows or mechanical loads, one should choose a material of tough board material and sur-face such as stainless or enamelled steel plate.
You can find more alternatives and associated U-value calculations on our website.
Rebate depth 51-67 mm
Total build depth
Framework profile depth 35-300 mm
Decorative profile depth 20-200 mm
Glass holder
Outer joint strip
Inner joint strip
Decorative profile
Venting and
draining
Glass
Glass thickness33-56 mm
Day opening size
Glass rebate size
Glass size = day opening size + 28 mm
Glass holder screw
Glass carrier
Facade glass5-12 mm
Mineral wool insulation
Diffusion barrier
Filling construction
Int. cladding
Facade sheet metal
Air gap
Venting and
draining
Ventilated air gap
Weather board
Board
44 45
Colour selection and choice of material create the entirety of the whole.Use the possibilities in our system.
44 45
Aluminium is a beautiful material. Anodising protects and enhances the metallic character of the surface. We offer six different colours of anodizing. Most of the colours in the NCS-S and RAL spectrums can be used for powder coating. We have chosen a gloss value of 80 since this gives the surface a sober and resistant finish. Decoral provides yet another pos-sibility for decorative surfaces on aluminium profiles. It is basically a powder coating solu-tion that is complemented with the desired pattern. You can combine the different surface treatments to your advantage and create the expression you desire. On exposed parts, such as door leaves and fittings, it is often an advantage to use natural anodisation. The whole is more important than the parts. Think about giving complementary components the same surface finish.
We offer the widest surface treatment program in the Nordic area, with three surface treat-ment methods for aluminium profiles. Each method has its strengths, its advantages. Which of them is preferable depends on the situation and taste.
Sapa Facades
Surface treatment and colour
46 47
46 47
Sapa Building System
Where to find us
Architect Support
In the Nordic countries, The Baltic and Hungary, Sapa Building System AB is responsible for our business, through the Sapa Building System product program. The headquarters for these markets can be found in Vetlanda, Sweden. Sales offices can be found in Norway, Denmark, Finland and Lithuania, with agents in Hungary and on Iceland. These provide support to architects, builders, contractors, etc. and also to each respective country’s network of qualified and well educated independent manufacturers.
Our free Architect Support service provides support for architects, designers, builders, contractors and administrators. Based on the demands, requirements and technical pre-requisites in individual projects, we can provide proposals for suitable solutions. A discussion with our engineers makes it easier to choose a design solution. The earlier we come into contact with each other, the easier it will be to reach your goal.
On our website, we have collected together inspiration, advice and tips for the creative phase. Our website also contains considerable project planning support and downloadable details. Our printed matter can be ordered from Architect support or from our website.
Find your local contact on our website: www.sapabuildingsystem.se
sapabuildingsystem.se
Headquarters
Sales offices
Manufacturers
Agents
ARCHITECTURAL ALUMINIUM SOLUTIONS
Head office SwedenSapa Building System ABS-574 81 Vetlanda Tel. +46 383 942 00 Fax +46 383 76 19 80 E-mail: [email protected] Internet: www.sapabuildingsystem.se
Sweden: HEADOFFICE Sapa Building System AB 574 81 Vetlanda Phone +46 383 942 00 Fax +46 383 76 19 80
e-mail: [email protected] www.sapabuildingsystem.se
Denmark:
Sapa Building System Langhøjvej 1 Indgang A 8381 Tilst Phone +45 86 16 00 19 Fax +45 86 16 00 79 e-mail: [email protected] www.sapabuildingsystem.dk
Finland:
Sapa Building SystemSinikalliontie 18 A, 02630 Espoo Phone +358 9 86 78 280 Fax +358 9 86 78 28 20 e-mail: [email protected] www.sapabuildingsystem.fi
Lithuania:UAB „Sapa Statybų Sistemos“ Kirtimu g.47, LT-02244 VilniusPhone +370 5 2102587 Fax +370 5 2102589 e-mail: [email protected] www.sapabuildingsystem.lt
Norway:
Sapa Building System Pb. 34, 2027 Kjeller Phone +47 63 89 21 00 Fax +47 63 89 21 20 e-mail: [email protected] www.sapabuildingsystem.no
AG EN T S
Hungary:
Vetlanda Kft. Szabó Illunka u. 22, HU-1015 Budapest Phone +36 12 25 06 41 Fax +36 12 25 06 42 e-mail: [email protected] www.vetlanda.hu
Nordikal Kft Bartók Béla út 152, HU-1113 Budapest Phone +36 1 204 0052 Fax +36 1 204 0053 e-mail: [email protected] www.nordikal.hu
Iceland:
Gluggasmidjan hf. Vidarhöfda 3, 112 Reykjavik Phone +354 577 50 50 Fax +354 577 50 51 e-mail: [email protected] www.gluggasmidjan.is
S A PA B U I L D I N G S y S T E M A B O F F I C E S
Sapa
Bui
ldin
g Sy
stem
AB
GB-
500/
12.2
7 Co
ndes
ign
Info
com
AB
2012