sap pp new

SAP PP

Review Questions for PP

Master DataOrganizational Structures

What are the various organizational structures in the R/3 System?Which R/3 organizational structures are used primarily for PP?What is the relation between controlling area, company code, valuation area, plant and storagelocation

Material Master

What is the purpose of different material master views?Which views are available?Which views are used primarily for PP?What is the relationship between material master views and individual organizational structures?How does the industry sector influence the material master maintenance?How does the material type influence the material master maintenance?What is the difference between external and internal number assignment and how is it set up inCustomizing?Which other factors can influence the selection of fields in the material master?How can MRP profile and forecast profile be used to optimize material master maintenance?How can a material master be reorganized (deleted/archived)?Which units of measure can affect processing in the material master (base unit of measure,production unit, order unit, etc.)?What is the material status used for and on which levels could it be maintained?Review the usage of the following settings?

MRP groupMRP typeReorder pointPlanning time fenceMRP controllerLot sizeProcurement typeSpecial procurement type

Production storage locationBackflush flagStock determination groupBulk materialScheduling margin keySafety stockStrategy groupConsumption mode and consumption periodAvailability checking groupAlternative selection flagDependent requirement flag for individual and collective requirementsProduction schedulerProduction scheduling profileUnderdelivery/overdelivery toleranceIn-house production time (lot size dependent/independent)Valuation classPrice control indicatorMoving average price/standard price

SAP http://www.saiyisap.com/knowledge/

Bills of Material

What is determined by BOM usage?What technical types of BOM are available?Can the technical type of a BOM be changed?During which processes will BOM usage and status be considered?When would it be useful to make use of a Group BOM?What is meant by area of validity and effectivity of a BOM?Which item categories are available and what are their specifications?What is a sub-item?Under which circumstances could a BOM be recursive and what the usage of the recursiveindicator?What is the usage of the following BOM settings?

Explosion typeRelevant to productionRelevant to costingMaterial provision indicatorBulk materialProduction storage location

Work Centers

What is a work center category?What data can be maintained on the various views (basic, default, capacity, scheduling, costing,etc.)?What is the purpose of a standard value key?What role does the operation control key play?What does referencing mean?Why to use a work center hierarchy?What is a pooled capacity?Analyze the usage of the following fields?

Backflush indicatorCapacity categoryFormulas for determining capacity requirementsRate of capacity utilizationRelevant to finite scheduling indicatorOverloadFormulas for schedulingLocation group (move time matrix)Queue times (normal and minimum)Cost centerActivity typesFormulas for costing

Routings

What does a routing define?How is a routing structured?What task list types are available in the R/3 System?What is a routing group and group counter?What is a routing sequence, and what types of sequence are available?What could be reasons to use sequences?What are the various options to assign materials to routings?Under which conditions would it make sense to assign components to operations?What is a reference operation set?How could the lotsize-dependend inhouse production time be calculated and updated into thematerial master?

Production Resources/Tools

What types of PRT are available?What is the relationship between PRTs and a routing/operation?

Engineering Change Management

What are the objectives of Engineering Change Management?What is the significance of changes with a history?Which PP objects can be managed using Engineering Change Management?What is the purpose of an engineering change request/order?How is a change master record structured?What is a revision level compared to engineering change master?Other Issues

Which scheduling options are available, and how do they differ from each other?Which time components are taken into account during scheduling?How are basic order dates determined?How are the scheduled dates determined?Which scheduling types are available in lead time scheduling?What role do reduction measures play in scheduling?What types of scrap can be maintained in PP basic data and how would they be considered duringMRP repectively scheduling?What is external processing, and what conditions must be fulfilled before external processing cantake place?What are co-products?

Production PlanningGeneral Issues

What are the various planning levels available in R/3 PP?What are the dependencies between Sales and Operations Planning, Demand Management,Long-Term-Planning and Material Requirements Planning?

Sales and Operations Planning

What is the purpose of Sales and Operations Planning?What is the structure of product groups and how could they be used in SOP/DM/LTP/MRP?What is the purpose of proportion factors and aggregation factors within product groups?Which planning methods are available in SOP?Which sources are available as input data for SOP?Which options are available for creating a sales plan in SOP?Which options are available for creating an operations plan in SOP?What is disaggregation?How could the result of SOP be passed on to different planning tools within the PP planningenvironment?

Demand Management

What is the purpose of Demand Management?At which points is Demand Management integrated with Sales and Distribution?Explain the main strategies in Make-to-Stock as well as in Make-to-Order planning logic. Payattention to master data settings.What does consumption respectively reduction mean in the context of planning strategies?What role does the individual/collective requirements indicator in the material master have duringmake-to-order production?What is a stocking level, and how can it be influenced?Which types of availability check are available (ATP and check against planning) and what are thecharacteristics of these checks?Explain the link between MRP group, strategy group, strategy and requirement class.What settings could be made in requirements classes (on PP as well as on SD side)?Explain the purpose of version management in Demand Management?

Master Production Scheduling

Under which circumstances would you recommend the usage of MPS?Compare the functionality of MPS with MRP?What is meant by the firming of procurement proposals, and how can this effect be achieved?What is a planning time fence, and where is it defined?What is a manual firming date, and where is it defined?How can a planned order be firmed, and which firming indicators are available in a plannedorder?

Material Requirements Planning

What is the purpose of MRP and how does it fit into the PP planning environment?How would you organize MRP runs? Discuss the different optionsMRP for a plant onlineMRP for a plant in backgroundMRP for a material (individual planning) - onlineWhich planning types are available (NEUPL, NETCH, NETPL)?Which planning parameters are to be set in the application itself?What is the function of the planning file?What is meant by single-level planning, multi-level planning?What is meant by interactive MRP?What are the characteristics of an MRP scenario that is performed in simulation mode?What is meant by low-level code and how is it considered in MRP?What is a net requirements calculation?Which buffers can be taken into account for the net requirements calculation in MRP (quantitybuffer: safety stock, time buffer: safety time)?What does lot-size calculation entail?Which lot-sizing procedures are available in the R/3 System (static, periodic and optimizingprocedures)? What are the characteristics of these lot-sizing procedures?

How does the procurement type defined in the material master affect MRP?What is backward scheduling? What are the characteristics of backward scheduling?What is the difference between basic scheduling and lead time scheduling?How are the order due dates determined in basic scheduling?How are the order due dates determined in lead time scheduling?How does the in-house production time defined in the material master affect scheduling?How does the scheduling margin key affect scheduling?How are BOMs selected in MRP? Which criteria are taken into account during BOM selection?What is a BOM selection ID?How are alternative BOMs selected?What is a production version?How are routings selected in MRP? Which criteria are taken into account during routing selection?What is an MRP list? What is a stock/requirements list? How are these lists structured? What arethe differences between these lists?What is the function of exception messages?What are planned orders?What is meant by the individual/collective conversion of planned orders?What is meant by days supply and receipt days supply?How can component discontinuation be managed in MRP?

Production Order ProcessingGeneral Issues

What are the characteristics of work-to-order production?What is defined in a production order?What is a document type, an order category and an order type?What are the various elements that a production order contains?Which functions are executed when an order is created?What are the various options available for creating an order?Describe the system logic during routing selection?Describe the system logic during BOM selection?At which point in time are reservations generated and what information does it contain?What can be achieved by performing the Read master data function?How could routing sequences be considered during production order creation?Describe the conversion of planned orders into production orders with focus on schedulingaspects?

Order Release

What happens when an order is released?Which operations are made possible and which are prevented when an order is released?

What is meant by status management?What are business transactions?What are the differences between system status and user status?At which points in time can availability checks be performed? Which settings can be made, andwhich must be made? On which objects can the availability check be run?What is meant by machine commitment?What is meant by midpoint scheduling?

Printing

Which shop floor papers can be printed?Which print modes are available (online, update, background)?What does reprinting mean?Which conditions must be fulfilled before order documents can be printed?Which conditions must an operation fulfill before shop floor papers (and in particularconfirmation slips and time tickets) can be printed?

Goods Issue

Which control indicators influence the behavior of the components in the production order (bulkmaterial, backflush, phantom assembly, etc.)?What is meant by picking?What is meant by stock determination? Which settings have to be made for stock determinationduring production order processing?What is a goods issue posting?How can goods issues be entered (reference to order, reference to reservation, unplanned, etc.)?What is the purpose of movement types?What are the effects of a goods issue posting from an integrational point of view (MM, FI, CO)?What is meant by the backflushing of components and how can this be achieved?

Confirmation

Which conditions must be fulfilled before confirmations can be entered?What is a confirmation?Which functions are linked to confirmations?Which confirmation procedures are available?What data can be entered during confirmations?What is a milestone confirmation?What is an unplanned milestone?What identifies a progress confirmation?What role does the control key defined in the operation play during confirmation?Is it possible to link a confirmation with a goods movement posting?

What is a goods receipt?What are the effects of a goods receipt posting?What is the relevancy of the delivery completed indicator?What is the function of overdelivery/underdelivery tolerance in the material master play?

Order Settlement / Archiving and Deleting

What is meant by order settlement?What causes a production order to be debited/credited?What is the difference between prelimenary costing and actual costing?Which are the usual steps during order settlement?What means variance calculation?How is an order settled if the header material is a standard price material?At which points in time can an order be settled?Which conditions must be fulfilled before an order can be archived?How are orders archived/deleted?What is meant by residence times?

Order Information Systems

Which information systems can be used for order management?What are the characteristics of the order information system?What are variable object overviews?What are the special characteristics of a (multi-level) order report?What is the difference between the order information system and the Shop Floor InformationSystem?Which functions are available from the order progress report?

Automation Options

What options are available for automating the processing of orders?What role does the production scheduling profile play?Describe the most lean production order and the necessary settings to achieve it?Which functions could be executed in the mass processing?

Collective Orders

What are the characteristics of collective orders?How can collective orders be created? Which conditions must be fulfilled?What are the advantages of working with collective orders?Which functions can be performed on collective orders?How is scheduling for a complete collective order done?What happens if a date/quantity for an order is changed within the collective order?Product Cost Planning

General Issues

What is a cost element (primary/secondary)?What is a cost component?What is a cost component split?Explain the Costing Variant and the main settings in customizing.What is a costing type?What settings can be done in a valuation variant?How is a costing sheet structured?

Base unit costing

Describe base unit costingWhich master data are required for base unit costing?How can results of BUC be used in further calculations?

Cost estimation without quatity structure

What is meant by quantity structure?Describe costing w/o quantity structureWhich master data are required for that costing logic?

Cost estimation with quantity structure

Describe cost estimation with quatity structureHow can the quantity structure be determined?What is activity based costing?How could results from standard cost estimation be updated into the material master?What happens if stock is on hand during that price update?

Repetitive ManufacturingGeneral Issues

What are the differences between discrete manufacturing and repetitive manufacturing?What are the characteristics of make-to-stock repetitive manufacturing and make-to-orderrepetitive manufacturing?

Master Data for Make-To-Stock Repetitive Manufacturing

What master data are necessary in repetitive manufacturing (material master, bill of material,production line, routing)?Describe the the following material master data:Repetitive manufacturing indicator?

Repetitive manufacturing profile?Production versions?Which object is used to collect the material costs and production activities?What are the various options available for establishing a link between the cost collector and theproduction version of a material? What role doe the repetitive manufacturing profile play here?

Planning Make-To-Stock Repetitive Manufacturing

What is the planning table in repetitive manufacturing? What functions can be executed fromhere?

Material Provision

Describe the usage of pull list and stock determination as one of its function.Which other ways are available to make sure that sufficient components are provided to the shopfloor?

Backflush

What does backflush mean in a repetitive manufacturing context?Explain the functions of final backflush.How can production activities be entered in the system?What is meant by post processing list?What are the advantages and disadvantages of negative stock?What does the reporting point backflush procedure entail?

Evaluations

Which evaluations are available?What is a reporting point overview?

Logistics Information SystemData Warehouse

What is the concept behind the Data Warehouse?Which individual information systems does the SAP Logistics Information System comprise?What data are evaluated by the information systems?What are info structures? What are the characteristics of info structures?Is there any relationship between system transaction data and the data in the info structures?Which reporting options are available in the SAP Information System?What is the difference between evaluations in LIS and evaluations on system transaction data inthe PP component?

Standard Analyses

What are standard analyses?Which navigation options are available in standard analyses?Which options in standard analyses can be used to influence the way in which data is presented?Which analysis functions are available in standard analyses (ABC analysis, comparisons,classification, etc.)?

Early Warning System

What is an early warning system?What are the various applications for the early warning system?How can the early warning system be used in standard analyses?What is an exception analysis?Which options are available for defining that an analysis should be performed at regular intervals?Which types of analysis are available in the early warning system (threshold value analysis, trendanalysis, planned/actual comparison)?

Flexible Analyses

What are flexible analyses? What is the difference between flexible analyses and standardanalyses?What are evaluation structures? What are evaluations?

1. When does a BADI default implementation execute

----------------------------------------------------------

Only if the developer specifies the default implementation should be executed

The default implementation always executes unless specified otherwise

When only active implementation exists

When no active implementation exists

2. A workflow model is made up of steps, that are assigned to

----------------------------------------------------------

People

Events

Roles

Triggers

Departments

3. What is the maximum number of allowed Detail lists

----------------------------------------------------------

Unlimited

10

20

As much as the roll area allows

4. Which layer in an R/3 client server architecture processes ABAP programs

--------------------------------------------------------------------------------

Application

Database

Presentation

Internet

5. Your screen has a table control defined to it. In the PAI, what does the SY-LOOPC systemvariable contain.

--------------------------------------------------------------------------------

Number of filled lines

Loop Counter

Number of table control lines

6. Identify the characteristics of the self reference ME

--------------------------------------------------------------------------------

The self-reference ME can be used to access individual components

None of the answers are correct

Self references allow an object to give other objects a reference to it.

All answers are correct

The reference ME can be used to determine the dynamic type of the reference variable in thedebugger

7. Mark the accepted formats of ALE data transfer

--------------------------------------------------------------------------------

(More than one answer is correct)

HTTP

BAPI

JAVA

XML

IDOC

8. Table ZMYTABLE is created in the dictionary. When does the table get created in theunderlying database

--------------------------------------------------------------------------------

At the end of the table creation after it is saved

When the database administrator physically creates the table

At the beginning of the table creation

When the table is activated

It does not correspond to an object in the underlying database and does not get created

9. Identify the valid statement

--------------------------------------------------------------------------------

Constants: C1(4) type D.

Constants: C1(4) type C value 'ABCD'.

Constants: C1(4) type C like mytab-booking.

Constants: C1(4) type C.

10. What is SAP Software Change Registration (SSCR) used for

--------------------------------------------------------------------------------

To register SAP modifications made by a developer

To register Customizing made by a developer

To register custom developed modifications made by a developer

To register enhancements made by a developer

11. Screen 200 follows screen 100. Screen 100 is displayed with GUI Status 'BASE'. Screen200 is then displayed without issuing the SET PF-STATUS what will take place

--------------------------------------------------------------------------------

Screen 200 is displayed without a status.

Status 'BASE' is displayed

Run Time Error

Standard List Status

12. Suppose LFA1 is the root node, LFBK and LFB1 are branches of LFA1, and LFC1 is abranch of LFB1. IF the report contains only one single GET statement for LFB1, theprocessing passes through which tables

--------------------------------------------------------------------------------

LFA1,LFBK,LFB1.LFC1

LFA1, LFBK, LFB1

LFA1 and LFB1

13. Mark the valid usage of the Read Statement.

--------------------------------------------------------------------------------


Read Line 3 of Current Page

DO. Read Line SY-INDEX. ENDDO.

Read Line 3 of Next Page

Read Current Line of Table ITAB

14. In what case would you typically use a NUMC field

--------------------------------------------------------------------------------

Where there is a need for numbers, characters, and arithmetic operations

Where only numbers are allowed and there is no need for arithmetic operations

Where only numbers are allowed and there is a need for arithmetic operations

15. How many At Exit-Command Modules are allowed in the PBO

--------------------------------------------------------------------------------

2

Unlimited

1

0

16. Where does information come from when you press F1 on a screen field

--------------------------------------------------------------------------------

Domain short text

Domain Help values

Search help

Data element documentation

17. Interface Methods are made available by calling the static method 'get_instance' of thewhich service class

--------------------------------------------------------------------------------

if_ex_badi

cl_exithandler_badi

cl_exithandler

exithandler

18. What is the order of transport in PBO when a table control is defined in your module pool

--------------------------------------------------------------------------------

Table control fields followed by the remaining screen fields

Screen fields followed by table control fields

Dictonary Fields followed by Program Fields

All fields regardless of table control definition are transported at the beginning of PBO

19. Singleton Concept is used to _________________

--------------------------------------------------------------------------------

Preventi multiple instantiation of a class for a program context

Prevent multiple execution of a single method

Prevent multiple definition of same named methods

Allow single classes only in a program

20. What methods would initialize a screen field that is defined with parameter id CAR

--------------------------------------------------------------------------------


Use the SET Parameter in the PBO of the DYNPRO

Set the screen painter attribute GET Parameter and fill in the Parameter ID field with CAR

Use the GET Parameter in the PBO of the DYNPRO

Use the GET Parameter in the PAI of the DYNPRO

21. Mark the valid values for a checkbox .

--------------------------------------------------------------------------------


1

Any Alpha Character

0

X

Space

22. Identify the internal table types.

--------------------------------------------------------------------------------


Standard

Sorted

Hashed

Indented

Key

23. Mark the valid logical nodes.

--------------------------------------------------------------------------------


Structure

File

Table

Complex Data Object

Node

24. At what point does a parameter ID get reset

--------------------------------------------------------------------------------

User sign off

Free Memory

Program Execution Ends

When you Flush the SPA/GPAmemory

25. Define Logical Database.

--------------------------------------------------------------------------------

Defintion of a Relational Data Model

An ABAP/4 Reading Program used to read and process data

A Reporting Tool

Amethod to update data

26. Which field gets set in the calling program if an exception occurs in a function module

--------------------------------------------------------------------------------

sy-subrc

interface parameters

exception parameters

exception integers

27. What must be assigned to a module pool in order for it to be executed

--------------------------------------------------------------------------------

Program Type

Transaction

Event

Module

28. What is the structure of the internal table when a select-options is declared in yourprogram.

--------------------------------------------------------------------------------

Sign Operator High Low

Sign Option Low High

High Low Sign Operator

Low High Sign Option

29. Identify the Characteristics of a Final Class

--------------------------------------------------------------------------------

methods cannot be explicitly designated as FINAL

all answers are correct

No answers are correct

cannot have subclasses

contains final methods implicitly

30. How many fields are available for viewing in field display mode while in debugger

--------------------------------------------------------------------------------

4

unlimited

2

831. Which part of the internal table syntax determines how abap accesses the rows of theinternal table

--------------------------------------------------------------------------------

key sequence

table type

uniqueness attribute

line type

32. Which Number range function would you use to determine if an external number lies in aspecified number range interval.

--------------------------------------------------------------------------------

NUMBER_RANGE_INTERVAL_LIST

NUMBER_GET_INFO

NUMBER_GET_NEXT

NUMBER_CHECK .

NUMBER_RANGE_EXTERNAL_CHECK

33. What can occur if a conversion rule does not exist for fields of incompatible data types

--------------------------------------------------------------------------------


A run time error for statically defined fields

A syntax error for statically defined fields

A syntax error for dynamically defined fields

A run time error for dynamically defined fields

34. Which statements will cause a syntax check error

--------------------------------------------------------------------------------


Data: x(3) type c.

Constants: x(3) type c value '123'.

Data: x(3) type c value '123'.

Data: x(3) type I.

Constants: x(3) type c.

35. What does a context object provide

--------------------------------------------------------------------------------


Stored calculated values on the presentation server

Increased Database Load

Reuseability

Smaller and simpler Programs

Object oriented Programming

36. What are the rules for Event parameters

--------------------------------------------------------------------------------


Events can only have EXPORTING parameters

EXPORTING Parameters for events can only be passed by value

EXPORTING Parameters for events can only be passed by reference

Events also allow RETURNING parameters

37. Choose the short form of the method call below

--------------------------------------------------------------------------------

call method rf_car->calculate_cost importing ex_size = v_size.

rf_car->calculate_cost( importing ex_size = v_size ).

rf_car->calculate_cost importing ex_size = v_size.

calculate_cost( importing ex_size = v_size ).

rf_car->calculate_cost (importing ex_size = v_size).

38. Where is the visibility of class components defined

--------------------------------------------------------------------------------

Class Definition

Object Instance

Class Methods

Class Implementation

39. What makes up a dialog step

--------------------------------------------------------------------------------

One sequence of a PBO followed by a PAI

One sequence of a PAI followed by a PBO

All PBO and PAI modules in the Module pool

All ABAP Modules of a screen

40. What access method is available for hash tables?

--------------------------------------------------------------------------------

Indexed

Sorted

Hashed

Keyed

41. CALL TRANSACTION has been issued in an ABAP. What code in the called transactionwill return to the point of call .

--------------------------------------------------------------------------------

Leave to Transaction

Stop Program

Exit.

Leave Program

42. Full buffering would be appropriate for what type of tables.

--------------------------------------------------------------------------------

Internal Tables

Tables with generic Keys

Transaction Tables

Small Static tables

43. What class is used to display the ALV Grid Control

--------------------------------------------------------------------------------

cl_gui_alv

cl_gui_alv_grid

cl_gui_custom_container

cl_gui_custom_grid

44. Which update request always run asynchronously

--------------------------------------------------------------------------------

Local

V2

Transactional

V1

45. What is required in the flow logic in order to process a table control?

--------------------------------------------------------------------------------

A loop .. endloop statement for the table control only in the PBO

A loop .. endloop statement for the table control only in the USER_COMMAND module

A loop .. endloop statement for the table control in both the PBO and the PAI

A loop .. endloop statement for the table control only in the PAI

46. Identify the statements that best describe the visibility of classes

--------------------------------------------------------------------------------


Local Classes are available only to programs in the same development class

Local Classes are available only to the program where the class is defined

Global Classes are available only from programs belonging to the same development class

Global classes are centrally available to all ABAP programs

47. Transaction 'ZABC' contains mandatory fields on the first screen. A Dialog program issuesthe statement CALL Transaction ZABC and Skip First Screen. What is required in the firstscreen of transaction ZABC for the call to function properly.

--------------------------------------------------------------------------------

The mandatory fields must be filled in with "Get Parameter" statement or default values inTransaction ZABC

The first screen in transaction ZABC can indicate that mandatory fields do not need to befilled in if called by another transaction

Export the screen fields to memory

The mandatory fields must be filled in with "Set Parameter" statement or default values in

Transaction ZABC

48. What is the term used when a change is made to a customer object in a system other thanthe original system

--------------------------------------------------------------------------------

Correction

Change

Modification

Repair

49. Changing the view of an instance of a class with more details is referred to as

--------------------------------------------------------------------------------

dynamic referencing

narrowing cast

widening cast

up cast

50. Identify the types of SAP GUI available

--------------------------------------------------------------------------------


HTML

Windows

XML

Linux

Java

PHP

51. Which of the following answers characterize ABAP OO events

--------------------------------------------------------------------------------


Classes subscribe to events

Classes trigger events

Events subscribe to classes

Start-of-selection is an OO event

Methods subscribe to classes

52. A screen field has been dynamically changed in a dialog program. When does it getre-initialized.

--------------------------------------------------------------------------------

At PAI execution

At the end of the transaction

At PBO execution

Only when the program encounters more code to modify the field attributes

53. What are the minimum requirements for Processing User requests in a Dynpro.

--------------------------------------------------------------------------------


The last field of the element list of the screen has the name OK_CODE

OK_CODE is Defined in the TOP Include

OK_CODE Checking is performed in the Screen Flow Logic

Define a GUI Status

54. What tasks could be perfomed in SAP Service Marketplace

--------------------------------------------------------------------------------


Registering changes to customer objects

Registering customer objects for local development

Registering developers

Registering changes to SAP objects

55. Identify the basic objects of the data Dictionary.

--------------------------------------------------------------------------------


Data Models

Tables

Documentation

Data Elements

Domains

56. Finish the sentence. Propogating exceptions requires __________________.

--------------------------------------------------------------------------------

the Raising cx_class parameter as part of the method signature of the calling method

a Cleanup Statement

a handler for the exception

the Raising cx_class parameter as part of the method signature where the exception is raised

57. Which parameter is used to refine the values returned by a search help

--------------------------------------------------------------------------------

restrict value range

Import

Export

administration data

58. What is true about the SAP Repository

--------------------------------------------------------------------------------


It stores development objects

It stores client-specific objects

Objects created using the IMG are stored in the repository

Objects in the repository can be viewed across clients

59. Identify the synchronous update techniques.

--------------------------------------------------------------------------------


PERFORM.. .. ON COMMIT and WAIT

COMMITWORKANDWAIT

CALL FUNCTION in Update Task

Update table.. ..

60. What is used to group repository objects

--------------------------------------------------------------------------------


Application Hierarchy

Change requests

Package

Repository Information System

61. Where does the Modification GROUP assignment of fields get defined.

--------------------------------------------------------------------------------

In the Dynpro

In the screen painter

Do you really care

Using the SET GROUP statement

62. What relationship can be established in watchpoints.

--------------------------------------------------------------------------------

combination of OR or AND conditions

OR conditions only

AND conditions only

any boolean operators

63. Identify the standard methods commonly found in BAPI's

--------------------------------------------------------------------------------


GETDETAIL

CREATEFROMDATA

CREATELIST

UPDATEDETAIL

GETLIST

64. Which statements would conclude a SAP LUW.

--------------------------------------------------------------------------------


ROLLBACKWORK

COMMITWORK

CALL Transaction

MESSAGE S101

65. Which is not a valid operation that can be performed on sequential files.

--------------------------------------------------------------------------------

Read dataset

Open dataset

Close dataset

Write dataset

Transfer dataset

66. What tool or technique would be used to move the definition of a global class to animplemented interface

--------------------------------------------------------------------------------

Web Dynpro

Object Navigator

BOR

Refactoring Assistant

BAPI wizard

67. What is a valid configuration for an R3 System.

--------------------------------------------------------------------------------


One Application server and one Database server

Many Application servers and one Database server

One Application server and many Database servers

No Application server and one Database server

68. What can be done using the SAP Service Marketplace

--------------------------------------------------------------------------------


Determine fixes/patches for problem areas

Communicate with user forums

Inquire about product pricing information

Order Technical Books

Find out when the next Support package is available

69. What is true about the End-of-page Event.

--------------------------------------------------------------------------------


Works only if you reserve space in the Report Statement using the line-count statement

Occurs when the page break has been triggered by the New-Page statement

Automatically creates a footer on the last page of a list

Used to create Footers

70. How would you define a lock object

--------------------------------------------------------------------------------

Create it as an object in the dictionary

Through a Function Call

Use the Data Browser

71. Identify the key word that determines if a CMOD function exit has been provided

--------------------------------------------------------------------------------

CALL CUSTOMER-SUBSCREEN

CALL PROGRAM-EXIT

CALL CUSTOMER-FUNCTION

CALL USER-EXIT

72. Select the methods used to access data on the database.

--------------------------------------------------------------------------------


Read Table

Get node

Native SQL

ABAP/4 Open SQL

LDB

73. What does the following code achieve

--------------------------------------------------------------------------------

At Selection-Screen on value-request for sales.

Call screen 100.

When the user presses F1, Screen 100 is displayed in addition to the normal help screen

When the user presses F4, Screen 100 is displayed in addition to the normal help screen

When the user presses F4, Screen 100 is displayed instead of the normal possible valuessearch help

When the user presses F1, Screen 100 is displayed instead of the normal possible valuessearch help

74. Match the class with their definition type

--------------------------------------------------------------------------------

1 ZCL_EMPLOYEE

2 ZCA_EMPLOYEE

3 ZCB_EMPLOYEE

AAbstract

B Final

C Persistent

1-A, 2-B, 3-C

1-C, 2-A, 3-B

1-C, 2-B, 3-A

75. Pick the syntax for a functional method with only 1 parameter

--------------------------------------------------------------------------------


refvar->method(im = p1)

refvar->method receiving()

refvar->method(p1)

refvar->method returning()

76. Which transaction is used to make dictionary adjustments when upgrading versions ofSAP

--------------------------------------------------------------------------------

SP01

SPAU

SPDD

CMOD

77. What does the DESCRIBE TABLE statement provide to the program

--------------------------------------------------------------------------------

Key length

Key Defintion

Key Uniqueness

Access Type

78. What class is used for method load_gui_status in a context menu

--------------------------------------------------------------------------------

cl_context_clas

cl_menu

cl_ctmenu

menu_class

79. "Call Function?Starting New Task" is an example of what type of call

--------------------------------------------------------------------------------

Direct

Synchronous

Asynchronous

Batch

80. What is the sequence of events and order of data transported in the following code. Selectthe correct order

--------------------------------------------------------------------------------

Process After Input

Module Exit at exit-command

Field ABC Module Validate_ABC.

10 All fields not defined in FIELD statements

20 System performs Auto Field Checking

30 Fields in FIELD Statements

10, 20, 30

20, 30, 10

20, 10, 30

81. Default Page Headings are created on which type of list.

--------------------------------------------------------------------------------

Secondary

All lists

Basic

82. When does the dialog processor perform automatic checks

--------------------------------------------------------------------------------

After PAI Processing is complete

Before PBO Processing Begins

After the User has pressed enter and before the PBO modules are processed

After the User has pressed enter and before the PAI modules are processed

sap pp new

Documents