sanders and sanding safety
DESCRIPTION
Sanders and Sanding Safety. Belt Sander. Belt Tracking. If the sanding belt starts to move over to the edge of the sanding surface, turn the sander off and contact your teacher. Belt Sander On and Off Switch. On and Off Switch. Vacuum System. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/1.jpg)
Sanders and
Sanding Safety
![Page 2: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/2.jpg)
Belt Sander
![Page 3: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/3.jpg)
Belt TrackingIf the sanding belt starts to move over to the edge of the sanding surface, turn the sander off and contact your teacher.
![Page 4: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/4.jpg)
Belt Sander On and Off Switch
On and Off Switch
![Page 5: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/5.jpg)
Vacuum SystemTo use the belt sander, the vacuum system has to be turned on.At the end of class make sure the vacuum system is turned off.
![Page 6: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/6.jpg)
Belt Sander Safety
When turning the Belt Sander on and off, make sure to keep your hair and clothing away from the sanding surface.
Jewelry can be a big problem.
![Page 7: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/7.jpg)
Using the Belt Sander
Correct Incorrect
Always keep your work piece flat on the sanding table.
The sanding belt will grab the edge of the work piece and pull your hand onto the sanding surface.
![Page 8: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/8.jpg)
Clean Up
Sweep these areas off with a hand broom from the top down. Use a big broom to sweep the floor.
![Page 9: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/9.jpg)
Disc Sander
![Page 10: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/10.jpg)
On and Off Switch
Disc Sander On and Off Switch
![Page 11: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/11.jpg)
Vacuum SystemTo use the Disc sander, the vacuum system has to be turned on.At the end of class make sure the vacuum system is turned off.
![Page 12: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/12.jpg)
Using the Disc SanderThe Disc Sander turns clockwise. Sand on the right side of the sanding surface.
Sanding Area
![Page 13: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/13.jpg)
Using The Disc Sander
Always keep your work piece flat on the sanding table.
Correct Incorrect
The sanding Disc will grab the edge of the work piece and pull your hand onto the sanding surface
![Page 14: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/14.jpg)
Stopping the Disc SanderWhen the Disc Sander is turned off, the sanding disc will keep spinning for about 10 min.At the end of class the sanding Disc needs to be stopped for cleaning. Use the wood from the shelf below to stop the sanding disc. Push the edge of the wood on the edge of the sanding disc softly to stop the sanding disk
![Page 15: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/15.jpg)
Cleaning the Disc Sander
Areas to clean with the hand brooms. Clean from the top down.
![Page 17: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/17.jpg)
Oscillating Sanders
On and off switches
![Page 18: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/18.jpg)
How to sand
Always keep your work piece flat on the sanding table.
Correct Incorrect
The sanding Disc will grab the edge of the work piece and pull your hand onto the sanding surface
![Page 19: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/19.jpg)
Using A Oscillating SanderKeep work piece flat on the sanding table
The sanding tube spins. Work in the opposite direction the sanding tube is spinning
![Page 20: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/20.jpg)
Cleaning The Oscillating Sander
Using a hand broom to sweep the sanding table. The sides of the sander. The table the sanders are on, and the floor around the table.
The sawdust from the sanders are very fine and light. Never blow the sawdust.
![Page 21: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/21.jpg)
Hand sander
Power Switch Lock
Power Switch
To keep the hand sander running with out holding the power switch, hold the power switch on and push the power switch lock in, then release the power switch
![Page 22: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/22.jpg)
Using the Hand Sander
Sanding Surface.Never Touch the sanding surface while the sander is on
![Page 23: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/23.jpg)
Cleaning the Hand Sander
Use a hand broom to sweep the table top, the sander and the floor under the sander. Sweep from the top down.
Watch where your head is when sweeping the floor under the sander.
![Page 24: Sanders and Sanding Safety](https://reader036.vdocuments.mx/reader036/viewer/2022062501/56816766550346895ddc4914/html5/thumbnails/24.jpg)
Hand Sanding
When using sand paper, make sure to keep your knuckle away from the surface.
Sweep the table top with a hand broom